The file length of env.go is getting hard to manage, so factor out the
test Runner to a new file.
Also move Runner.Close to the bottom of the file to have a more logical
progression.
Change-Id: Ifebea3277d826e9456aa02507a8349746386eb03
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229780
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
In order for regtests to wait until file diagnostics are complete,
instrument diagnostics with verbose WorkDone reporting. In order for
this to be granular enough for use, the modification source needed to be
threaded through to the didModifyFiles function (which is where the
diagnostic goroutine is spun off).
A new expectation is added: CompletedWork, to allow specifying that a
specific work item has been completed. The problem with using
NoOutstandingWork was that it required a continuous chain of work to
prevent the regtest from succeeding when the bug was present, meaning
that by the time we have sent the didChange notification successfully
the server must have started work on its behalf. This was inherently
racy, and too tricky to get right.
Additionally, a couple bugs are fixed:
- EmptyDiagnostics is corrected to account for the case where we have
received zero diagnostics for a given file.
- A deadlock is fixed in Await when expectations are immediately met.
Updates golang/go#36879Fixesgolang/go#32149
Change-Id: I49ee011860351eed96a3b4f6795804b57a10dc60
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229777
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Our current usage of WorkDone progress reporting (new in v3.15 of the
LSP spec) is in reporting progress on `go generate` commands. In
preparation for using this API more widely, factor out the reporting API
from the current io.WriteCloser wrapper (workDoneWriter).
Change-Id: Ib528093d81d4fc065528df90e100859e850b10df
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229459
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We were using strings.Split on env vars, which did bad stuff when the
var contained an =, e.g. GOFLAGS=-tags=foo. Only split on the first =.
Irritatingly, this breaks only `go mod` commands, so almost nothing in
gopls failed, just organize imports and the `go.mod` code lens stuff.
Fixesgolang/go#38669
Change-Id: I8d28c806b77a8df92100af1fa4fbcca5edf97cff
Reviewed-on: https://go-review.googlesource.com/c/tools/+/230560
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This moves the common code from the cmd and gopls tests to the shared cmdtest package, they were starting to drift apart.
This change was extracted from another larger cl where I was trying to work out why it broke in one but not the other.
Change-Id: I554ce364f4152e6b61f989da8162d968426d4ae5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/230301
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change was unfortunately lost while rebasing, resulting in a lot of
unremoved directories.
Change-Id: Icc1b667e31ac85e617b1c3a8d7c58f78e999d151
Reviewed-on: https://go-review.googlesource.com/c/tools/+/230314
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
There were a few cases where we were not properly qualifying package
names, particularly if the original package had a named import. Now,
we map between these names correctly - handling the case of multiple
packages that need to be qualified. This requires applying edits to
*ast.SelectorExprs, as well as *ast.Idents.
We still do not fully qualify unimported packages, and likely won't,
unless that's an issue for many users.
Updates golang/go#38591
Change-Id: I966a4d1f936f37ede89362d03da3ff98d8952a06
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229979
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
The definition command-line interface doesn't match the rest of the
commands, because I think we originally wanted to make them all
subcommands of "gopls query". Remove this, since it's no longer in use.
Change-Id: Iee923db6328774f787d539931001e438d1a2ae6e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/230299
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Instead of tagging events with their type, instead we infer the type from
the label pattern.
The standard event creators all have a matching test that returns true
if the the labels pattern matches the ones that would be built by the
creator.
Spans and logs already have a unique label pattern, other event types
required a special label marker.
This makes the system much more extensible, and also cleans up some
the API.
Change-Id: I1fbc9ec07aa84ead6c12bbd5ca65b13b605bfa4a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229242
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Formatting keys in labels can panic when a label is constructed with a nil
error. Avoid that by not passing the defective label to event.Log.
Change-Id: I3099a7ac48c5830af1072141f2b619d0e0fbcf5a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229985
Run-TryBot: Peter Weinberger <pjw@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
In cases like:
var v interface{}
fmt.Println(<>)
Completing to "v" would insert "v..." instead of "v". This was due to
a mixup where we were checking if the variadic type "[]interface{}"
was assignable to the candidate type "interface{}" instead of the
other way around.
Fixesgolang/go#38652.
Change-Id: I27c0b50bbf4b895924c8ed2c0c9dd6785e98cbe1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229921
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
In order to experiment with adding more progress reporting to gopls, add
a new experimental configuration for verbose work done reporting.
Also, pass configuration in InitializationOptions when initializing the
editor.
Change-Id: Id2336790719d9c0b6d663997e1aef672aec43d28
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229458
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change improves our approach to handling type aliases. Previously,
we were not fully qualifying the names in the AST, making the code
inserted in completions incorrect at times. Now, we clone the relevant
AST expr and qualify it. We also add handling for the return values of a
function, instead of just the parameters.
Fixesgolang/go#38230Fixesgolang/go#37283
Change-Id: Ib79f4636891c9b610ae848e9fa4dbae7c63db509
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229319
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
In preparation for later changes, add support for tracking outstanding
work in the lsp regtests. This simply threads through progress
notifications and tracks their state in regtest.Env.state. A new
Expectation is added to assert that there is no outstanding work, but
this is as-yet unused.
A unit test is added for Env to check that we're handling work progress
reports correctly after Marshaling/Unmarshaling, since we're not yet
exercising this code path in actual regtests.
Change-Id: I104caf25cfd49340f13d086314f5aef2b8f3bd3b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229320
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This was the last piece of Event that was public, and it was only public to
allow mutation in tests.
Adding CloneEvent allows tests to create an updated copy rather than
update the event in place.
Change-Id: I2215d1eb0317063948ef0fac955fa768a209564d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229241
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Now key types can be implemented outside the package that holds labels or events, they should be.
This prevents the large list of types from poluting the public interface of the core packages.
Change-Id: I927f31cb5e4e1d0c29619681015962f890623e5c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229240
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
Also moves core.Key to label.Key, but leaves the implementations
behind for now.
After using for a while, the word Tag conveys slightly the wrong
concept, tagging implies the entire set of information, label maps
better to a single named piece of information.
A label is just a named key/value pair, it is not really tied to the
event package, separating it makes it much easier to understand the
public symbols of the event and core packages, and allows us to also
move the key implementations somewhere else, which otherwise dominate
the API.
Change-Id: I46275d531cec91e28af6ab1e74a2713505d52533
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229239
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
event.Log removed
event.Print -> event.Log
event.Record -> event.Metric
event.StartSpan -> event.Start
In order to support this core now exposes the MakeEvent and Export functions.
Change-Id: Ic7550d88dbf400e32c419adbb61d1546c471841e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229238
Reviewed-by: Robert Findley <rfindley@google.com>
internal/telemetry/event was renamed to internal/event/core
Some things were partly moved from internal/telemetry/event straight to
internal/event to minimize churn in the following restructuring.
Change-Id: I8511241c68d2d05f64c52dbe04748086dd325158
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229237
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
The code for formatting function signatures is fairly confusing.
Factoring out an unexported signature type simplifies things a bit.
Hopefully we'll be able to pull out more formatting logic from the other
features. Ideally, I'd like to return to the separation between
internal/lsp/source and internal/lsp so that a formatting package can be
pulled out and used in internal/lsp.
Change-Id: I7428db5004eab371e46402188e0dc6bb30f0c425
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229318
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change also required the addition of a new run configuration -
WithEnv, which adds extra environment variables to the configuration.
Please let me know if this is the wrong approach.
Fixesgolang/go#37984
Change-Id: Ied2a53a443dc74c7ed723b91765eeddc1a7c1c00
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229128
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
A few more updates to the regtest framework - add support for all
codeActions, not just organize imports. Also, return diagnostics from
env.Await to pass into code actions. Not sure if that's the correct way
to do it, so please let me know if there's a better way.
The test is for 1.14 only, since -modfile is only supported after 1.14.
Fixesgolang/go#38211
Change-Id: I5cdd35e2ec06e2b2487d1f3491197030008be9c9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/226958
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Not sure when this got fixed, but confirmed manually and via a
regression test.
Fixesgolang/go#36951
Change-Id: I7833a5d1119c34fd3fb45ea658e954eadbee750c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229129
Reviewed-by: Heschi Kreinick <heschi@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
ID's are now by value not pointer, which caused it to not use the Format
method, resulting in broken id strings
The id maps need to be crossover (set and get go to different maps for a given direction of message)
Change-Id: Ide2b63ec1b009ae3587ee10e8bce018732ea342c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229244
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Peter Weinberger <pjw@google.com>
The special cases were all removed by the previous changes to jsonrpc2 messages.
The only difference now is the "Recieved" vs "Sending" text prefix, so we just paramaterize the common function with that instead.
Change-Id: If6f8de39dca38041cf68a6b5506ff0482af3cb8e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/228890
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
messages are the atomic unit of communication, changing streams
to read and write whole messages makes the code clearer.
It also avoids the confusion about what should be an atomic
operation or when a stream should flush.
Change-Id: I4b731c9518ad7c2be92fc92211c33f32d809f38b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/228722
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Currently, where a package has a test variant, we end up walking the
non-_test.go files twice: once when walking the package itself, the
second time when walking the test variant. In the gopls tests, this
means we end up double-counting the number of symbols (via the @symbol
annotation) in a package.
Extend the existing expect_test.go to demonstrate the problem is fixed
(a test which fails when the fix is not in place)
Change-Id: Ifd68b3d86e24f19d3f8efc3af71494b7d28b0acb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/228761
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
In preparation for a later change where we alter the implementation of
the workspace Symbol method, we now specify the Name that should be used
when constructing a SymbolInformation value from a @symbol annocation.
There is no change in the test expectations.
Change-Id: I4ee5f714d6060aab2ee33ef18339504f443cecdc
Reviewed-on: https://go-review.googlesource.com/c/tools/+/228757
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This saves it from having to know the wire format and understand the decoding
tricks.
Change-Id: I1f3ef3345ffee736a9d104f8ebfb436404d737c0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/228721
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
The previous implementation was exposing the details of the wire format
and resulted in non idomatic go, detecting the presence of absence of
values in fields to deterimine the message type.
Now the messages are distinct types and we use type switches instead.
Request still exists as an interface to expose the shared behaviour of
Call and Notification, as this is the type accepted by handlers.
The set of messages is deliberately closed by using a private methods on the
interfaces.
Change-Id: I2cf15ee3923ef4688670c62896f81f760c77fe04
Reviewed-on: https://go-review.googlesource.com/c/tools/+/228719
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
I had intended to enable these after gopls/v0.4.0 was released so that
people who test at master can try these out. Also, mark "fillreturns" as
high confidence so users can get it applied on save, much like
goreturns.
Change-Id: I71aa0b723b2e9b69474ceed7cb1d7da7c929d65d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/228724
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
I believe that other changes in gopls/v0.4.0 also fixed the issue that
this regression test was written for. Re-enable it, and change it to
assert that diagnostics are cleared.
Fixesgolang/go#37195
Change-Id: I4538186ad288d9c6f70cc450f948b62f3868941f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/228723
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Due to the asynchronous and non-transactional nature of the LSP, writing
regtests requires waiting for certain conditions to be met in the client
editor. To this point, the only type of condition for which we supported
waiting was the presence of diagnostic messages, but we can in principle
wait for anything that is triggered by a server notification.
This change generalizes the notion of expectations to also encompass log
messages. Doing this required expanding the value returned from checking
expectations to include a new "Unmeetable" verdict, to account for cases
where we know that a condition will never be met (for example if it is a
negative assertion). This may be useful for diagnostics as well.
A test is added to demonstrate these new expectations, where the initial
workspace load fails due to unfetchable dependencies.
Additionally, some helper flags are added to help debug regtests without
a code change, by allowing changing the test timeout, printing logs, and
printing goroutine profiles.
Updates golang/go#36879
Change-Id: I4cc194e10a4f181ad36a1a7abbb08ff41954b642
Reviewed-on: https://go-review.googlesource.com/c/tools/+/228399
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Certain regtests require referencing external data. To support this, add
the ability to use a file-based proxy populated with testdata.
To expose this configuration, augment the regtest runner with variadic
options. Also use this to replace the Runner.RunInMode function.
Add a simple regtest that uses this functionality.
Updates golang/go#36879
Change-Id: I7e6314430abcd127dbb7bca12574ef9935bf1f83
Reviewed-on: https://go-review.googlesource.com/c/tools/+/228235
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Closing the workspace has frequently been failing on Windows, due to
file locks held by the go command.
This change makes several tests more careful to check errors when
closing resources, and defers closing the regtest workspaces until the
entire test suite completes, at which point it is much more likely that
closing the workspace will succeed.
If this change results in test flakes on Windows, we should temporarily
demote errors in regtest.Runner.Close to a t.Log.
Updates golang/go#38490
Change-Id: Ibd2f7dd0e0e2faecfa0ca8c60237fc72e64f6719
Reviewed-on: https://go-review.googlesource.com/c/tools/+/228231
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The fix is just a missing return.
Also clean up a staticcheck thing, regenerate the golden files.
Fixesgolang/go#38417
Change-Id: I290b63df9d97211c59d6399fda7a273bc700fbdb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/228297
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
While trying to be pragmatic, I simply locked the fake.Editor while
calling textDocument/formatting. This did indeed manifest later on as a
deadlock, so instead we release the lock but fail if the buffer version
changes while awaiting the formatting call.
Change-Id: I0ca24a502f3118e76de306a016449bbe665e70e4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/228230
Run-TryBot: Robert Findley <rfindley@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Configuration was not being set correctly, because the configuration
response was not honoring the configuration section order.
Change-Id: I8418535b45e6a24fd8f0605d58cb370e22664f17
Reviewed-on: https://go-review.googlesource.com/c/tools/+/228257
Run-TryBot: Robert Findley <rfindley@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In https://golang.org/cl/225157, I removed the redundant T and Context
parameters from the regtest func signature in an effort to reduce
confusion. In hindsight, removing the testing.T did not reduce
confusion, because there is a T in the test signature anyway (and now
it's the wrong T!).
Change-Id: I2e84009e9cb33cd51055012cfef9fe4987e1b9bd
Reviewed-on: https://go-review.googlesource.com/c/tools/+/228229
Run-TryBot: Robert Findley <rfindley@google.com>
Reviewed-by: Paul Jolly <paul@myitcv.org.uk>
TryBot-Result: Gobot Gobot <gobot@golang.org>
illumos has a different copy of the `diff` executable, causing this test
to fail. Ignore it for this GOOS.
Updates golang/go#38414
Change-Id: I45ec5fcd9fd332977349bb6ba33d9ed09417a023
Reviewed-on: https://go-review.googlesource.com/c/tools/+/228199
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
reply is now passed to handlers separately from request, which allows it to be
substituted by handlers.
This also makes the handler signature much closer to http (which has
ResponseWriter)
Change-Id: I12be2e8e8b9bd508982ba43c9092709429284eaf
Reviewed-on: https://go-review.googlesource.com/c/tools/+/227839
Reviewed-by: Robert Findley <rfindley@google.com>
The wire structures do not need to be public, and making them so might make it
harder to keep the package correct without breaking changes if the protocol
changes in the future.
Change-Id: I03a5618c63c9f7691183d4285f88a177ccdd3b35
Reviewed-on: https://go-review.googlesource.com/c/tools/+/227838
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
We utilize error wrapping to recover the error codes when needed.
The code constants are also replaced by fully declared errors with
human readable messages.
Change-Id: I8edeb05f5028e99966e4ca28151f644f008d4e7d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/227837
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This required changing the jsonrpc.Conn.Call signature to also return the
request ID so it can be cancelled.
The protocol package now declares the Call function which wrapps up
Conn.Call and then sends a cancel message if the context was
cancelled during the call.
There is a small chance that a context can be cancelled on a
request that has already completed, but it is safe to do so.
Change-Id: Ic8040c193e1dd4ef376ad21194b1d0ea82145976
Reviewed-on: https://go-review.googlesource.com/c/tools/+/227558
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Replace the String method with a Format method so we can use it for extra
formats.
Add some tests to make sure it is all correct
Change-Id: I39f361ffba036fad99c93f8c0944164f7cf199ec
Reviewed-on: https://go-review.googlesource.com/c/tools/+/227486
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
I was curious about why were logging errors during type-checking in
tests, and the answer turned out to be a bit more sinister than I
expected. We were getting type error messages without filepaths, so I
tried to reproduce it in the playground and wasn't able to. I realized
that these errors were coming from were coming from the "fixed" version
of the AST that we pass to the type checker.
Adding fake positions to our fake Cond statements trivially fixes the
logging issue, but it does nothing to handle the fact that the error
makes no sense to the user - because it applies to something that's not
in the source code. I figured we have two options: (1) skip type errors
for all packages with "fixed" ASTs, or (2) add something to the error
messages to indicate that the source code may not match. Starting with
(1) here, and if it becomes a problem, we can move to 2. All ASTs that
we fix have *ast.BadExpr in them, meaning that, by definition they have
parse errors which we will preferentially show those errors to users in
diagnostics (so I'm not sure how to test this).
Change-Id: I17733968aa15f989cdd3e4e7261c4f4fe9b97495
Reviewed-on: https://go-review.googlesource.com/c/tools/+/227557
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Found golang/go#18824, which helped me understand what to do to fix this
issue. Also, changed some of the structure of the code to propagate
errors up to the top-level functions. I think this will help us deal
with actual errors vs. ignorable errors.
Didn't add tests because of golang/go#35880. Just prioritized that issue
for gopls/v0.5.0 - it's been biting us a lot lately.
Fixesgolang/go#38285
Change-Id: I6962462818becb1bcedde4a5be3a2060e71c9389
Reviewed-on: https://go-review.googlesource.com/c/tools/+/227559
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Gopls gets confused about the package if the package name is edited.
(See golang.org/issues/32149) This skipped test will succeed as long
as the bug is present.
Change-Id: Ic99ceda133f92f306baf94e2f8ad0381ed565814
Reviewed-on: https://go-review.googlesource.com/c/tools/+/227760
Run-TryBot: Peter Weinberger <pjw@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Wrap the regtest test servers to capture jsonrpc2 logs, so that they can
be printed on test failure.
There was a little bit of complication to implement this in the 'Shared'
execution mode, and since we're not really using this mode I just
deleted it.
Updates golang/go#36897
Updates golang/go#37318
Change-Id: Ic0107c3f317850ae3beb760fc94ae474e647cb78
Reviewed-on: https://go-review.googlesource.com/c/tools/+/226957
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Per the documentation for jsonrpc2.Stream Write must be safe for
concurrent use, but this isn't the case for the loggingStream.
Guard it with a mutex.
Change-Id: I384892b90cef950d518089421d05cf8040c6b233
Reviewed-on: https://go-review.googlesource.com/c/tools/+/227487
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Change the tag iteration api to something less flexible
that allows for event iteration without allocation.
Change-Id: I212d45ebceea0183d1a61e6b611e0558649be60a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/227301
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
This change attempts to fix a concurrency error that would cause
textDocument/CodeLens, textDocument/Formatting, textDocument/DocumentLink,
and textDocument/Hover from failing on go.mod files.
The issue was that the go command would return a potential concurrency
error since the ModHandle and the ModTidyHandle are both using the
temporary go.mod file.
Updates golang/go#37824
Change-Id: I6cd63c1f75817c7308e033aec473966536a2a3bd
Reviewed-on: https://go-review.googlesource.com/c/tools/+/224917
Reviewed-by: Heschi Kreinick <heschi@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change is the first step in handling golang/go#38136. Instead of
creating multiple diagnostic reports for type error analyzers, we add
suggested fixes to the existing reports. To match the analyzers for
FindAnalysisError, we add an ErrorMatch function to source.Analyzer.
This is not an ideal solution, but it was the best one I could come up
with without modifying the go/analysis API. analysisinternal could be
used for this purpose, but it seemed to complicated to be worth it, and
this is fairly simple. I think that go/analysis itself might need to be
extended for type error analyzers, but these temporary measures will
help us understand the kinds of features we need for type error
analyzers.
A follow-up CL might be to not add reports for type error analyzers
until the end of source.Diagnostic, which would remove the need for the
look-up.
Fixesgolang/go#38136
Change-Id: I25bc6396b09d49facecd918bf5591d2d5bdf1b3a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/226777
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Turns out that these were already disabled in the
golang.org/x/tools/internal/lsp tests, which is why we only ever save
the failures in golang.org/x/tools/internal/lsp/source tests. Discussing
the reasons that this is necessary on the issue, but I think completion
scoring in general needs to be centralized and documented, so hopefully
we can handle this case as part of that larger fix.
Fixesgolang/go#38269
Change-Id: Ie1b615315e417ab8211a3580cf8f27cbdc3b74e4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/227417
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
The code for `gofmt -s` directly modifies the AST, since the ASTs are
not long-lived. Some of this code made it into our analysis
implementations, causing very strange bugs to manifest. Added a
regression test for this specific case.
Fixesgolang/go#38267
Change-Id: I235620adcbf2bbc7027c6d83ff2c7fe74729062e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/227299
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Makes Event implement TagMap directly, instead of
having to build an entirely new object.
Change-Id: I0c1e8638de3dc3347f60fd93af3df6b7f8387751
Reviewed-on: https://go-review.googlesource.com/c/tools/+/227300
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
I originally made this change to see if it would help with the timeouts.
Based on the TryBot results, it doesn't -- but I still think it's more
correct to have the contexts this way. It was my mistake to put the
context on the completer in the first place, I think.
Change-Id: Ib77c8f0ac0b0d0922b82db4120820fb96cb664f4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/227303
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Now it only uses the telemetry messages directly rather than the metric system.
This is much faster and more direct, and removes a blocker on improving the
metrics support.
Also fixes the fact that recieced and sent were the wrong way round before,
probably as an artifact of the old protocol logging code, and also removes
the bytes histogram which was a lie (it was a histogram of write sizes that
was presented as a histogram of message sizes)
fixesgolang/go#38168
Change-Id: Ib1c3459c0ff1cf0c6087a828981e80c1ce1c5c1b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/227139
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
This pushes the handler construction out to the user, allowing flexability of
use, and is the final stage of the switch to the new handler API.
Change-Id: Id2e61813a817df0d6e4d20dd47ce8c92b0ae87db
Reviewed-on: https://go-review.googlesource.com/c/tools/+/227024
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
We can do cancelling at the top level handler now, it can drop the cancel
messages themselves before they enter the queue stage, and also track
all the events as they flow through it.
The ugly part is the OnCancelled interface, which is a bit clunky.
Change-Id: I3fa972198625fb3517fdecc740d1a3fdb19a188a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/226959
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
It is now a programatic error to have a handler registered to a connection that
does not call reply for all messages, including notifications.
This normalizes the flow making the code easier to understand and fixes a
couple of long standing hard to find bugs.
Change-Id: If41c39ece70e3bc64420abefac75ec647a8f8b37
Reviewed-on: https://go-review.googlesource.com/c/tools/+/226838
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Handler is now a function type that mapps to what used to be the Deliver method.
The only handler that used other methods was Canceller, for now that still
exists as LegacyHooks. Once the handlers are fully cleaned up we should be able
to re-implement canceller as handler middleware.
Each connection is now only allowed one handler, and it is passed to the Run
method, but handlers are composable.
Change-Id: I370e0459df851bb9c9c2a679b99cff073b94489e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/226479
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Instead of checking the context, check the error. This may expose some
errors that are not wrapped correctly. Replaced all uses of errors
with golang.org/x/xerrors.
Change-Id: Ia40160f8ea352e02618765f2a9415a4ece0dcd94
Reviewed-on: https://go-review.googlesource.com/c/tools/+/227036
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
The modifications in CL 226559 introduced a new call to
RunProcessEnvFunc that was not using the context with a timeout, so deep
completion tests were hitting the timeout early (I think?).
Also, fix a staticcheck warning that's been bugging me today.
Change-Id: Iac894f630ebfa1cbc5588ae3a5490a93fa53aba2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/227057
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
A couple small improvements for regtests:
- module names fixed to include a '.'. This was fixed for diagnostic
tests already.
- For regtests that were written to exercise specifig github issues,
include the issue number in the test name.
Change-Id: I67da6d78dc166e854d2543cf63dac382202f9dbc
Reviewed-on: https://go-review.googlesource.com/c/tools/+/226844
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We need to search all transitive dependencies of a package, not just its
immediate imports.
Fixesgolang/go#38100
Change-Id: I15b4dbe226ba851691ca0c95460c3648ede32f04
Reviewed-on: https://go-review.googlesource.com/c/tools/+/227030
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Rohan Challa <rohan@golang.org>
One of the tricky things about asserting on conditions in regtests is
the asynchronous nature of LSP. For example, as the LSP client we cannot
be sure when we've received all diagnostics for a given file.
Currently, regtests are implemented by awaiting specific diagnostic
expectations. This means that if gopls generates diagnostics that do
not match those expectations, we can only time out the test.
Ideally, we would want to know that gopls is done generating all diagnostics
for the current file state. This is not possible without knowing the
status of diagnostics for. Barring this, we would want to know that
diagnostics are done for the current file version. Unfortunately, that
also is not possible, because a new version of file B can affect
diagnostics in file A.
So in lieu of this information, this CL exposes a few tools that can be
used to improve the experience of writing new regtests.
- A new expectation is added: AnyDiagnosticAtCurrentVersion, that is
satisfied if any diagnostics have been received for the current
buffer version.
- ExpectDiagnostics is added to Env, to help check whether the current
diagnostics matches expectations.
Updates golang/go#38113
Change-Id: I48d2c3db87c13ac3ab424d01d9444cbc285af9e1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/226842
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
When proposing unimported package members, we start with packages loaded
in-memory first, for three reasons: we know that they're fast, they're
fully typed, and they're probably pretty relevant. I hadn't bothered
doing that for package names, because the first two reasons aren't very
relevant. But the third still is -- loaded packages are a pretty good
approximation for in module scope, etc.
With this change we do package names the same as members, so relevance
should be about as good. Not perfect, but nobody's complained much yet.
Fair bit of copy-and-paste, but I don't want to extend the
getAllCandidates abstraction outside of the imports package yet.
Updates #38104.
Change-Id: Ia479181607dff898baee3cd6aa84d1ab61715d19
Reviewed-on: https://go-review.googlesource.com/c/tools/+/226559
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
If we release gopls/v0.4.0 soon, we should keep these new analyzers off
by default. They were just merged, so they haven't been used enough to
be enabled, I think. We'll turn them on by default for gopls/v0.5.0.
Also, ended up creating a helper function to check if analysis has been
abled (which fixed a small bug in FindAnalysisError), and another helper
function to enable all analyses for testing purposes.
Updates golang/go#38212
Change-Id: I5ee94b3582dfc0863978650fc6ce51bfa0606c13
Reviewed-on: https://go-review.googlesource.com/c/tools/+/226962
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rohan Challa <rohan@golang.org>
The options can be modified without the view being recreated, so we need
a mutex there.
Change-Id: I87e881835622a941fce98e4a1062aa41acd84fcb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/227022
Reviewed-by: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
This change ports the functionality of https://github.com/sqs/goreturns
to be used as code actions on diagnostics that have missing
return values. It improves on the original goreturns functionality by:
- filling out empty return statements
- trying to match existing return values to the required return
values and then filling in missing parameters
Fixesgolang/go#37091
Change-Id: Ifaf9bf571c3bc3c61e672b0a2f725d8d734d432d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/224960
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change makes sure that all errors in code actions are returned,
instead of ignored. There is also a refactoring of the suggested fixes
for go.mod files so that we don't compute them unless there is already a
matching diagnostic.
Change-Id: I34afda0116f3cc7e47809d980a0171487787e55e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/221221
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rohan Challa <rohan@golang.org>
This change adds a RunGoCommand function to the workspace, which will
allow us to test how gopls responds when a certain go command is
executed. Add a test that checks behavior after "go mod init" runs.
Change-Id: I679249c1654b136d44187397b4196b8a10b5615e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/226478
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This change adds a helper function that checks if the context is
canceled, and if so, doesn't log the error. Tried to use it everywhere
in internal/lsp where it fits, which resulted in changing a few pieces
of error handling throughout.
Updates golang/go#37875
Change-Id: I59cbc6f893e3b70cf84524d9944ff7f4b4febd78
Reviewed-on: https://go-review.googlesource.com/c/tools/+/226371
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This allows us to reduce the handler interface and delete the telemetry handler.
It is also safer and faster, and can be easily disabled along with the rest of
the telemetry system.
Change-Id: Ia4961d7f2e374f7dc22360d6a4020a065bfeae6f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/225957
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Some things that used to be safe due to the global
lock now need ther own synchronization primitives.
Fixesgolang/go#38102
Change-Id: I03c692682d57620d96fe84b7dc74efae0d3f8f09
Reviewed-on: https://go-review.googlesource.com/c/tools/+/226317
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This change makes working with tests easier by trimming the folder name
up to "testdata". This will remove any ellipses from the test folder name.
Fixesgolang/go#38103
Change-Id: I33b931e527de63713b8fc370c50b1c382796b2b8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/226377
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
https://github.com/microsoft/vscode-go/issues/3076#issuecomment-605062933
inspired me to write a regression test for this case. Turns out we
weren't handling it correctly after all...
This change makes sure that we only rebuild the view once a new go.mod
file is saved, not just created. It also preserves the snapshot ID
number when the view is recreated so that diagnostic caching continues
to work as expected.
Change-Id: I63bd559c3bd33b91828171cd7ddb3d099c31cddb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/226017
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
On case-insensitive file systems, the editor may send us a path that
works but doesn't match the actual file's case. Then when we run go
list, we'll get mismatching paths and everything will break.
We can't reliably fix this problem: tracking what case the editor
expects is too difficult to be worth it. Instead, check the workspace
path and bail if it's mismatched.
Possibly we should also check files on DidOpen or such, but we can start
with this.
Updates golang/go#36904.
Change-Id: I7635c8136bf9400db4143a0f2fde25c39b5abc44
Reviewed-on: https://go-review.googlesource.com/c/tools/+/225239
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change adds a quick fix for type errors of the type "no new vars on left side of :=". It will replace the ":=" with an "=".
Updates golang/go#34644
Change-Id: I91af8eb82956104229c3b4f3d0fce60fdfdbb5ea
Reviewed-on: https://go-review.googlesource.com/c/tools/+/225477
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds a quick fix for type errors of the type "no result values expected". It will replace the return statment with an empty return statement.
Updates golang/go#34644
Change-Id: I3885748dfc69a2d19f8e7a2e81f36f6d0a20d25b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/223666
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change uses the new unusedparams analyzer to remove any unused parameters from functions inside of internal/lsp/source :)
Change-Id: I220100e832971b07cd80a701cd8b293fe708af3d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/225997
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
govim integration tests (and probably some real user sessions) are
broken because telemetry metrics are not threadsafe, resulting in an
index out of range panic.
Fix this by adding a flag (labeled temporary) to disable telemetry
export.
Also temporarily update govim to master to pick up some fixes, and run
only the -short tests to avoid timeouts.
Updates golang/go#38042
Change-Id: I584e5d200c2f732bd4024002ee6253d09623b29f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/226057
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change adds a quick fix for diagnostics that have an error message of the form "undeclared name: %s". It provides a quick fix to add a new variable with that name.
Updates golang/go#34644
Change-Id: I6534ee79d1770d1a62bac169c3c7e52e2443f39e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/222237
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds support within gopls for analyzers that work with type errors to provide suggested fixes.
Updates golang/go#34644
Change-Id: Ia8929173752fda6bd84a9edaabd310e758f25fe8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/222761
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
As part of investigating golang/go#38100, I noticed a few things that I
wanted to clean up. Mostly, for renames, we were calling
qualifiedObjAtProtocolPos twice, so I factored out a shared helper
function. I also added an error return for builtins so that callers
don't have to check.
Change-Id: I28c75c801cbec1611736af931cfa72befd219201
Reviewed-on: https://go-review.googlesource.com/c/tools/+/225777
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rohan Challa <rohan@golang.org>
This is one of the simplifications that "gofmt -s" applies.
https://golang.org/cmd/gofmt/#hdr-The_simplify_command
A slice expression of the form:
s[a:len(s)]
will be simplified to:
s[a:]
Updates golang/go#37221
Change-Id: Ibd4dedaadc9b129d5d39524f0c1ccc8a95bf7e0d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/223659
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
This is one of the simplifications that "gofmt -s" applies.
https://golang.org/cmd/gofmt/#hdr-The_simplify_command
An array, slice, or map composite literal of the form:
[]T{T{}, T{}}
will be simplified to:
[]T{{}, {}}
Updates golang/go#37221
Change-Id: I2dca46501983c8af3581c9319d973da5cf690388
Reviewed-on: https://go-review.googlesource.com/c/tools/+/223660
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
This change adds a pass that checks for unused parameters inside of a function. It is disabled by default.
Updates golang/go#36602
Change-Id: I9e8de3368f16f27e7816ec4ddb16935e1a05584e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/222817
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This is one of the simplifications that "gofmt -s" applies.
https://golang.org/cmd/gofmt/#hdr-The_simplify_command
A range of the form:
for x, _ = range v {...}
will be simplified to:
for x = range v {...}
A range of the form:
for _ = range v {...}
will be simplified to:
for range v {...}
Updates golang/go#37221
Change-Id: Ic6babbd0b8ab961ebb4d0d6df72df52d9acde6e7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/223661
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds support for analyzers that have suggested fixes of the kind Source.FixAll. This will allow these fixes to be applied on save if the user desires.
To auto apply these fixes on save, make sure your settings.json looks like:
"[go]": {
"editor.codeActionsOnSave": {
...
"source.fixAll": true,
...
},
...
}
Update golang/go#37221
Change-Id: I534e4f6c8c51ec2848cf2899aab68f587ba68423
Reviewed-on: https://go-review.googlesource.com/c/tools/+/223658
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change removes the disabledAnalyses setting and replaces it with a more general feature named "analyses". This will allow users to opt in as well as opt out of analyzers that they do not find useful. This also updates some documentation to show users what analyzers gopls is using and which are enabled by default.
Change-Id: Id3239b4c4c9667e834f262c889270d14fdba0f93
Reviewed-on: https://go-review.googlesource.com/c/tools/+/223662
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Noticed this in https://github.com/fatih/vim-go/issues/2786. I don't
think that this will fix the problem in this issue, but we should avoid
nil pointers as much as possible. Also, remove a bit of extra whitespace
so that the style closer matches that of the rest of the project.
Change-Id: I94b924ea14e4a296382e3e68c52eeb43f6cd86a6
Reviewed-on: https://go-review.googlesource.com/c/tools/+/225523
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Type switch on the key and use it to get the value and decide how
to render it.
Use the same render for all debug tag printing.
Change-Id: Ia305fded7dcf05b57c5805f48bb5c22fa7def71f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/225380
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Now that keys are solidly typed, we can use them for the metrics.
This prevents accidentally using the wrong type of key, and
allows us to use the typed accesorrs rather than the raw value.
Change-Id: I553bd8e12128d3f00a3e926dbd3bfd420cd3f135
Reviewed-on: https://go-review.googlesource.com/c/tools/+/225378
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
In support of https://golang.org/cl/224960, add utility functions that
create zero value expressions for a given types.Type. There are probably
some bugs here but they pass the basic tests in that CL.
Known problems: it skips through type aliases, and can't handle
anonymous structs/interfaces. Hopefully it's pretty unusual to return
those.
Change-Id: I69a388d9ce9bd60bc230e4a3d2b30f581ec25698
Reviewed-on: https://go-review.googlesource.com/c/tools/+/225177
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rohan Challa <rohan@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
If a package starts out as command-line-arguments, and then becomes
"valid" (i.e., gets a package declaration), we shouldn't continue to try
to diagnose "command-line-arguments". We should remove
"command-line-arguments" from workspace packages any time its metadata
is invalidated (assuming it may get added back if a file= query produces
it again).
Include the relevant regression test.
Fixesgolang/go#37978
Change-Id: I7fc51edeb58007b4b4a163336cbeb752a53da322
Reviewed-on: https://go-review.googlesource.com/c/tools/+/225317
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
This separates the concerns of tag collections that have to be iterated
and tag collections that need lookup by key.
Also make it so that events just carry a plain slice of tags.
We pass a TagMap down through the exporters and allow it to be
extended on the way.
We no longer need the event.Query method (or the event type)
We now exclusivley use Key as the identity, and no longer have a
common core implementation but just implement it directly in each
type.
This removes some confusion that was causing the same key through
different paths to end up with a different identity.
Change-Id: I61e47adcb397f4ca83dd90342b021dd8e9571ed3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/224278
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
In an effort to be idiomatic, I made the regtest func signature
func(context.Context, testing.T, *Env), despite the fact that Env
already has a Context and a T.
This just ended up causing more confusion, as it's not clear which
Context or T to use. Remove this and just use the fields on Env.
Change-Id: I54da1fdfe6ce17a67601b2af8640d4d2ea676e8c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/225157
Run-TryBot: Robert Findley <rfindley@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Expressing regtests in terms of textual coordinates is hard to read: the
reader ends up counting lines and characters to understand the text edit
or assertion.
To address, this, add two new functions for fake.Editor: RegexpSearch
and RegexpReplace, as well as a symmetric RegexpSearch function for
workspace files and wrappers for regtext.Env.
This allows expressing edits as well as buffer locations in terms of
easily scannable regexps.
An alternative solution to this problem is to integrate markers ala
packagestest. I tried this, but it ended up being cumbersome to
implement and less usable than regexps, due to the static nature of
markers: after the buffer has been edited all markers must be
updated.
Updates golang/go#36879
Change-Id: Iad087cf0d529737034197beef7b729816a159c69
Reviewed-on: https://go-review.googlesource.com/c/tools/+/224757
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
For debugging purposes, we print the output of `go env` on start. Now,
we print a view-specific `go env`, which will helps us when debugging
multi-project workspaces. Additional information included: the folder of
the view, if the view has a valid build configuration, and the build
flags for the view.
Updates golang/go#37978
Change-Id: Iadffd46f8ac5410971558a304b8bbcb2f9bdbcc3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/225137
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This is helpful for users to diagnose issues, but it annoys people who
have workspaces with both non-Go and Go projects. I'm going to spend
some more time thinking about this, particularly about which error
messages we should retry the initial workspace load for.
Updates golang/go#32394
Change-Id: I7d02b385da232914fe7342837dc3a9c4185399fd
Reviewed-on: https://go-review.googlesource.com/c/tools/+/225237
Reviewed-by: Heschi Kreinick <heschi@google.com>
I'm not sure if this is entirely the correct approach, but at the very
least we should never pass "command-line-arguments" to packages.Load. We
still need to cache packages with the path "command-line-arguments" to
avoid an excessive number of calls to packages.Load.
Updates golang/go#37978
Change-Id: I1b5263a3dab95aacd797f03f742069fd0c53619c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/225117
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
A common annoying mis-completion is as follows:
type foo struct {
field int
}
func (f foo) Field() int { return f.field }
func (f foo) logic() {
if f.f<>
}
Now at <> we prefer "field" over "Field()". Similarly:
type foo struct {
}
func (f foo) DoSomething() { }
func (f foo) doSomething() { }
func (f foo) logic() {
f.d<>
}
Now at <> we prefer "doSomething()" over "DoSomething()". All else
being equally, you normally want private objects over public objects
when the private objects are available.
The same logic is applied to deep completions so we prefer "c.foo.bar"
over "c.Foo().bar".
Change-Id: Ic91cba7721ddb1f2a30338037693ddcce8c621f7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/223877
Run-TryBot: Muir Manders <muir@mnd.rs>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We can re-enable this when we have a version of Go that includes the fix
for golang/go#37971. Then we can continue playing whack-a-mole with go
list corner cases :)
Fixesgolang/go#37958
Change-Id: I2417731bf5c01fbde867fef2ef03b5025ae779c7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/224538
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This allows us to hide the implementation details of how tags are stored on a
context from the normal interface, to allow us to explore more efficient
mechanisms.
The current storage is not intended as the most efficient choice, this cl is
about isolating the API so we can experiment with benchmarks in the future.
Change-Id: Ib101416bccd8ecdee269cee636b1564d51e1da8a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/222854
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
The next version of VS Code Go has to be released before this can be
released.
Fixesgolang/go#37966
Change-Id: I6b97f2a3ff9c8400ae85b815d8bf83a9b12b1069
Reviewed-on: https://go-review.googlesource.com/c/tools/+/224518
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
definition.Run requires a nil check of opts before applying to avoid
panic, and test must be run with markdown enabled.
When running 'go test' without -run flag, connection.initialize() was
not called and there was no problem because the default value of
Options.PreferredContentFormat was Markdown.
In addition, currently using the same connection despite different
options, therefore make to use a different connection for different
options.
Change-Id: I6ef773c14cbdcae621da9295d4c618c3aff0beee
Reviewed-on: https://go-review.googlesource.com/c/tools/+/222497
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
While experimenting with different static analysis on x/tools, I noticed
that there are many actionable diagnostics found by staticcheck. Fix the
ones that were not false positives.
Change-Id: I0b68cf1f636b57b557db879fad84fff9b7237a89
Reviewed-on: https://go-review.googlesource.com/c/tools/+/222248
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This changes the way keys work, there is still a single internal key
implementation for performance reasons, but the public interface is a set of key
implementations that have type safe Of and Get methods.
This also hides the implemenation of Tag so that we can modify the storage form
and find a more efficient storage if needed.
Change-Id: I6a39cc75c2824c6a92e52d59f16e82e876f16e9c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/223137
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
It encourages poor performing log lines, and also reduces the readability of
those lines.
Also delete the Key.With method which was unused, and should never be used
instead of the event.Label function anyway.
Change-Id: I9b55102864ee49a7d03e60af022a2002170c0fb1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/222851
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Move the lsp specific telemetry package that just declares the labels under the
debug package and call it tag, to make all the usages much more readable.
Change-Id: Ic89b3408dd3b8b3d914cc69d81f41b8919aaf424
Reviewed-on: https://go-review.googlesource.com/c/tools/+/222850
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
This allows early exporters to adjust the event for later ones.
This is used to lookup key values from the context if needed.
Also add a Query type event which is intended to perform all event
modifications but nothing else, and is used to lookup values from
the context. This cleans up a weirdness where the current lookup
presumes there will be an exporter with a matching mechanism.
Change-Id: I835d1e0b2511553c30f94b7becfe7b7b5462c111
Reviewed-on: https://go-review.googlesource.com/c/tools/+/223657
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
When searching for deep completions, we can end up enumerating struct
types' fields a lot. Optimize fieldSelections to reduce work:
- Wait until we see an embedded field before we create the "seen"
map.
- Use a callback style to iterate over the struct's fields rather than
returning a slice of fields.
- Change "seen" checking strategy back to track struct types rather
than each individual field.
Struct with 5 non-embedded fields:
name old time/op new time/op delta
Fields-16 293ns ± 1% 20ns ± 2% -93.13% (p=0.008 n=5+5)
name old alloc/op new alloc/op delta
Fields-16 120B ± 0% 0B -100.00% (p=0.008 n=5+5)
name old allocs/op new allocs/op delta
Fields-16 4.00 ± 0% 0.00 -100.00% (p=0.008 n=5+5)
Same struct but add an embedded struct with 2 fields:
name old time/op new time/op delta
Fields-16 389ns ± 1% 142ns ± 1% -63.53% (p=0.008 n=5+5)
name old alloc/op new alloc/op delta
Fields-16 120B ± 0% 144B ± 0% +20.00% (p=0.008 n=5+5)
name old allocs/op new allocs/op delta
Fields-16 4.00 ± 0% 2.00 ± 0% -50.00% (p=0.008 n=5+5)
I think the alloc/op went up because the "seen" map is no longer
allocated on the stack. There is more room for more optimization, but
it's probably not worth making things more complicated.
Change-Id: I6f9f2124334a8594ef9d6f9b5ac4b3a8aead5f49
Reviewed-on: https://go-review.googlesource.com/c/tools/+/223419
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This commit will make the 'go generate' CodeLens command check the client
capabilities to use $/progress to report the progress of the command or otherwise
it will fallback to showing the message box already in place. The $/progress will
give you a play by play update while the message box shows only the beginning and
the end. The gopls logs will have all the details in either case.
Note that the $/progress is an LSP 3.15+ feature and not yet supported in all clients.
Updates golang/go#37680
Change-Id: I5ba37448be8e388f728394795e1bb5f1d50cc30d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/223739
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change fixes breadcrumbs when the cursor is inside of a method by making the method a top level symbol and removing it from the struct's hierarchy.
Fixesgolang/go#36949
Change-Id: I8da5f453a5c78ade1e7688fc4eeebf79ce96f1e1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/221819
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This CL gets code.ts to generate code for $/progress and
window/workDoneProgres/create messages. $/progress uses a
ProgressParams type which contains one of three new data types,
WorkDoneProgressBegin, WorkDonProgressEnd, WorkDoneProgressReport.
In addition, a *TextEdit is now generated for CompletionItem.TextEdit.
The substantive differences in code.ts are around line 451 and line
682. Everything else is whitespace caused by vscode formatting typescript
differently on different OSes.
Change-Id: Ide441e6e0029cbc8401d6476f6a939216cc89634
Reviewed-on: https://go-review.googlesource.com/c/tools/+/223743
Run-TryBot: Peter Weinberger <pjw@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds support for recognizing a //go:generate directive
and offering a CodeLens that will then send a "generate" command to
the server to run "go generate" or "go generate ./...". Because
"go generate" can only be executed per package, there is no need to show
the CodeLens on top of every //go:generate comment. Therefore, only the
top directive will be considered.
The stdout/stderr of the go generate command will be piped to the logger
while stderr will also be sent to the editor as a window/showMessage
The user will only know when the process starts and when it ends so that they wouldn't
get bogged with a large number of message windows popping up. However, they can
check the logs for all the details.
If a user wants to cancel the "go generate" command, they will be able
to do so with a "Cancel" ActionItem that the server will offer to the client
Fixesgolang/go#37680
Change-Id: I89a9617521eab20859cb2215db133f34fda856c7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/222247
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This CL adds support for sending progress notifications through $/progress
calls as well as being able to cancel them through window/workDoneProgress/cancel.
This feature is only supported in clients running LSP 3.15 and therefore the initialize
request will check for client capabilities for its progress support.
Updates golang/go#37680
Change-Id: Iff8c016694746a9dd553e5cc49444df7afcc21f5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/222981
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Now that the feature-set is relatively complete for running gopls in
daemon mode, daemon.md is updated to reflect the new features and to
remove some of the experimental warnings. Similarly the `-remote` flag
is made more welcoming.
The feature still needs more usage, but it shouldn't be considered
experimental anymore.
Fixesgolang/go#34111
Change-Id: I994fc8f9f84bf856f24e1eadabd73c503267e804
Reviewed-on: https://go-review.googlesource.com/c/tools/+/222717
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Previously it was an error to call shutdown while the server was not yet
initialized. This can result in session leak for very short-lived
sessions.
Instead, allow shutdown to proceed and simply log the error. On the
other hand, for consistency make it an error to call initialized without
first calling initialize.
Updates golang/go#34111
Change-Id: I0330d81323ddda6beec0f6ed9eb065f8b717dea0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/222671
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Three new flags are added to the serve command, and threaded through to
the LSP forwarder:
-remote.listen.timeout: -listen.timeout for the auto-started daemon
-remote.debug: -debug for the auto-started daemon
-remote.logfile: -logfile for the auto-started daemon
As part of this change, no longer enable debugging the daemon by
default.
Notably none of this configuration affects serving, so modifying this
configuration has been chosen not to change the path to the automatic
daemon. In other words, this configuration has effect only for the
forwarder process that starts the daemon: all others will connect to the
daemon and inherit whatever configuration it had at startup. This should
be OK, because in the common case this configuration should be static
across all clients (e.g., many Vim sessions all sharing the same
.vimrc).
Exposing this configuration made the signature of lsprpc.NewForwarder
a bit hard to understand, so I decided to go ahead and switch to a
variadic options pattern for initializing both the Forwarder and
StreamServer, the latter just for consistency with the Forwarder.
Updates golang/go#34111
Change-Id: Iefb71e337befe08b23e451477d19fd57e69f36c6
Reviewed-on: https://go-review.googlesource.com/c/tools/+/222670
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Add a new toplevel `inspect` verb to the gopls command, to expose the
internal state of a running gopls server. For now, this verb exposes a
single subcommand `sessions`, which lists some information about current
server sessions on a gopls daemon.
This can be used even if the debug server is not running, which will
become the default in a later CL.
Updates golang/go#34111
Change-Id: Ib7d654a659fa47280584f9a7301b952cbccc565a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/222669
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This makes keys a pointer, which reduces the allocations during logging, and has
a significant improvement in memory and cpu cost when there is no exporter.
Packing a string into an interface requires a 16 byte allocation, packing a pointer
does not.
name old time/op new time/op delta
/LogNoExporter-8 4.39µs ± 2% 3.83µs ± 2% -12.74% (p=0.000 n=18+20)
/Log-8 23.5µs ± 2% 22.6µs ± 1% -4.20% (p=0.000 n=19+18)
name old alloc/op new alloc/op delta
/LogNoExporter-8 1.70kB ± 0% 1.38kB ± 0% -18.78% (p=0.000 n=20+20)
/Log-8 4.91kB ± 0% 4.91kB ± 0% ~ (p=1.000 n=20+20)
name old allocs/op new allocs/op delta
/LogNoExporter-8 83.0 ± 0% 63.0 ± 0% -24.10% (p=0.000 n=20+20)
/Log-8 163 ± 0% 163 ± 0% ~ (all equal)
Change-Id: Iec127f1bff8d5c8f4bd0a6d9f6d8fc4b8bc740b2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/222599
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This is now the only package that is exposed to normal use, and should
be the only thing to appear in libraries.
Change-Id: I90ee47c6519f30db16ff5d5d2910be86e91e5df2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/222557
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
The original intention was to limit the number of open file handles,
but the parseLimit semaphore was limiting parser.ParseFile calls that
don't access files, so there was no benefit. The file limiting is
already handled generically by another semaphore in the lsp FileSystem
abstraction.
Change-Id: Idc7f2507af5287e983a7edf3e38a848d26770bbe
Reviewed-on: https://go-review.googlesource.com/c/tools/+/223119
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The tests will not run because there is no workspacesymbol marker.
Therefore, restore testdata used in WorkspaceSymbols tests, and
initialize data so that the tests run even if the target of the marker
is 0.
Change-Id: I051b842183b7e23bb746cc282fc3921a90ca8df1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/221617
Reviewed-by: Heschi Kreinick <heschi@google.com>
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Now we properly offer "case" and "default" keyword completion in cases
like:
switch {
<>
}
First I had to add an AST fix for empty switch statements to move the
closing brace down. For example, say the user is completing:
switch {
ca<>
}
This gets parsed as:
switch {
}
Even if we manually recover the "ca" token, "<>" is not positioned
inside the switch statement anymore, so we don't know to offer "case"
and "default" candidates. To work around this, we move the closing
brace down one line yielding:
switch {
}
Second I had to add logic to manually extract the completion prefix
inside empty switch statements, and finally some logic to offer (only)
"case" and "default" candidates in empty switch statements.
Updates golang/go#34009.
Change-Id: I624f17da1c5e73faf91fe5f69e872d86f1cf5482
Reviewed-on: https://go-review.googlesource.com/c/tools/+/220579
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Change AllImportsFixes to get the ParseGoHandle directly rather than
using getParsedFile. The latter also type checks the containing
package, which is slow in general and can be really slow in certain
circumstances. This should speed up the organizeImports code action.
Change-Id: Ic505873db41d5d76c398cee42f0323e390d9e034
Reviewed-on: https://go-review.googlesource.com/c/tools/+/222780
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
The recent LPS protocol change made the definition of textEdit into
a union type, so the generated code made TextEdit an interface{},
which broke govim. This CL reverts it to a *TextEdit. The code
generator will be fixed in another CL.
We can revisit this when gopls wants to start using the new
InsertReplaceEdit type.
Change-Id: I4d7a14b3746b747f34b0907f72ecbc3593706a05
Reviewed-on: https://go-review.googlesource.com/c/tools/+/222765
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
