The FileIdentity struct mixes information about the file itself
(filename, hash) with information about the LSP references to that file
(session ID, version). When we create a cache key using it, we only want
the former, as returned by the String method. Otherwise we split the
cache whenever those irrelevant fields are different.
We also use FileIdentity as an element of diagnosticsKey, but I believe
that use is appropriate.
Change-Id: I094e00d2700e05778da635effbb69d0ebcb6726e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/244020
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Due to the runtime's inability to collect cycles involving finalizers,
we can't close over handles in memoize.Functions without causing memory
leaks. Up until now we've dealt with that by closing over all the bits
of the snapshot that we want, but it distorts the design of all the code
used in the Functions.
We can solve the problem another way: instead of closing over the
snapshot/view, we can force the caller to pass it in. This is somewhat
scary: there is no requirement that the argument matches the data that
we're working with. But the reality is that this is not a new problem:
the Function used to calculate a cache value is not necessarily the one
that the caller expects. As long as the cache key fully identifies all
the inputs to the Function, the output should be correct. And since the
caller used the snapshot/view to calculate that cache key, it should
always be safe to pass in that snapshot/view. If it's not, then we
already had a bug.
The Arg type in memoize is clumsy, but I thought it would be nice to
have at least a little bit of type safety. I'm open to suggestions.
Change-Id: I23f546638b0c66a4698620a986949087211f4762
Reviewed-on: https://go-review.googlesource.com/c/tools/+/244019
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The memoize cache buys us little for files: the cache value is not
really a function of the inputs, but rather the filesystem state. It's
pretty much just as easy to manage them explicitly, and it's a start at
simplifying our caching strategy.
We do lose one small feature: if we try to read the same file
concurrently, reads will not be deduplicated. I suspect that doesn't
matter.
Change-Id: I75e219467fb7a512d9cfdf87443d012c85f03df9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/243197
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
The PackageHandle interface is fairly redundant with the Package
interface. As much as convenient, move users to Package and
weaken/remove methods from PackageHandle.
I would like to get rid of CompiledGoFiles too but
NarrowestPackageHandle is a little annoying. I think this is
unambiguously a step forward so I figured we can get it in and keep
iterating.
Change-Id: I6c5a3f462b1f19cbca6a267fedc36ce54613b6fc
Reviewed-on: https://go-review.googlesource.com/c/tools/+/244018
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
I'm not sure how the regtest didn't catch this - is it possible that
it could unmarshal a single string a slice of string? Either way, I'd
like to get the fix in quicker - I'll try to add more regtests for this
later.
Also, validate the upgrade results more thoroughly.
Change-Id: I812a3fecd9f0642a1408c0a9c0376bb98d50b397
Reviewed-on: https://go-review.googlesource.com/c/tools/+/245065
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
I finally spent the time to understand why branch changes were causing
unexpected errors. There may be other bugs, but this is the first I
spotted. For batched invalidations, we were overriding the value of
invalidateMetadata for each file, so the results depended on the order
of files in the didChangeWatchedFiles notification.
Change-Id: Id3ca7a758af0115c46dcd74ede590a0be3f8307d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/244606
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
When a package consists of files that only fail to parse, we fail to
associate parse errors with the package, and therefore return no
diagnostics. To address this, we need to associate the errors with the
package. This involves adding a *token.File to the parseGoData so that
error messages and positions can be properly extracted, even when there
is no associated AST.
Fixesgolang/go#39763
Change-Id: I5620821b9bcbeb499c498f9061dcf487d159bed5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/243579
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Some modules may need to be added to the go.mod without being associated
with an import statement. In such cases, we show the missing module
diagnostic on the whole go.mod file. This isn't ideal, but mapping to
the full require statement isn't that simple, and this is an easy enough
starting point. The code in mod_tidy.go is becoming more unwieldy - I
think I will clean it up in a follow-up.
Fixesgolang/go#39784
Change-Id: Ib32ec1fd74c455ce42ba778ea6cba0a475cf245a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/243218
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This change expands the scope of a workspace to the whole module, if the
user is in module mode. This means that diagnostics will appear and will
be updated for the whole module, even if the user only opens a
subdirectory. Similarly, references and other such queries will always
return consistent results, no matter which directory the user opens.
A new "root" field is added to the view. This is either the view's
folder or its module root. Almost all uses of view.folder have been
changed to view.root.
Updates golang/go#32394
Change-Id: I46f401f7c44b1b8429505aa032e0c15e88c4e2ef
Reviewed-on: https://go-review.googlesource.com/c/tools/+/244117
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
I noticed a race in these logs:
https://build.golang.org/log/ec2915e97319de219284ed022338f2ebc549aff6.
We need to copy the environment and build flags for each config, since
we're treating the config as single use.
Change-Id: I9e717e688def088cb60f2b23b71d731e2b20b259
Reviewed-on: https://go-review.googlesource.com/c/tools/+/244118
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This change adds support for `go mod tidy` on save when users opt into
import organization on save. Previously, we supported this with the
go mod tidy command, but there's no need to do this when we already
have a ModTidyHandle available.
Change-Id: Ibb47b6a7611fd823dac2a3b4f3a43b9fbb3289b6
Reviewed-on: https://go-review.googlesource.com/c/tools/+/243777
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change attempts to parse diagnostics out of `go list` error
messages so that we can present them in a better way to the user. This
approach is definitely tailored to the unknown revision error described
in golang/go#38232, but we can modify it to handle other cases as well.
Fixesgolang/go#38232
Change-Id: I0b0a8c39a189a127dc36894a25614535c804a3f0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/242477
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change ensures that, when the initial workspace load fails, we
re-run it if the go.mod file changes. Previously, if a user opened a
workspace with a corrupt go.mod file, we never recovered.
To reinitialize the workspace on-demand, we use the initializeOnce field
as an indicator of whether or not we should reinitialize. Every call to
awaitInitialized (which is called by all functions that need the IWL),
passes through the initialization code. If a retry isn't necessary,
this is a no-op, but if it is, we will call the initialization logic.
Only the first attempt uses a detached context; subsequent attempts can
be canceled by their contexts.
To indicate that we should reinitialize, we call maybeReinitialize.
Right now, we only call this when the go.mod file changes. In the
future, we may need it in other cases.
Fixesgolang/go#38232
Change-Id: I77eefebb0ac38fbd0fe2c7da09c864eba45b075f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/242159
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Previously, we only updated the opened file's overlay, but not the
snapshot. This meant that the snapshot was still operating with stale
data. Invalidating the snapshot creates a new snapshot with the correct
set of overlays.
The test is skipped because it will flake until we have a better caching
strategy for `go mod tidy` results.
Updates golang/go#40269
Change-Id: Ia8d1ae75127a1d18d8877923e7a5b25b7bd965ac
Reviewed-on: https://go-review.googlesource.com/c/tools/+/243537
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
We had previously been treating file changes with no content in the same
way as the deletion of content. Now, we distinguish between the two.
Fixesgolang/go#38424.
Change-Id: I44b338006af0c13a8a3f842844521789ea378470
Reviewed-on: https://go-review.googlesource.com/c/tools/+/243577
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is unnecessary. It also saves a lot of time for the regtests.
Change-Id: Ifc12d4c8e0c215f336e958316d415bc7f30e5344
Reviewed-on: https://go-review.googlesource.com/c/tools/+/243538
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Currently, diagnostics for modules that are missing from the go.mod
appear in the Go files in which those modules are imported. As a result,
the diagnostics were previously calculated as part of the Go file
diagnostic calculations. This is convoluted and required passing around
an extra map.
This CL puts that logic in the ModTidyHandle where it belongs.
The diagnostics for the Go files are combined from the multiple sources.
Also, added a skipped test for golang/go#39784, since this CL was
originally intended to be a fix for that issue...
Change-Id: Ic0f9aa235dcd56ea131a2339de9801346f715415
Reviewed-on: https://go-review.googlesource.com/c/tools/+/242579
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
getFile still returns a FileHandle, even if the file doesn't exist on
disk. Work-around this by checking if the file exists before adding
the file handle to the map.
Fixesgolang/go#38498
Change-Id: Ie02679068b37bf4f3d19966c6cfcf2361086b1de
Reviewed-on: https://go-review.googlesource.com/c/tools/+/242924
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change addresses an underlying issue with the go.mod code, which is
that it was modifying go.mod files without cloning them. This could've
resulted in some ugly race conditions.
We also handle the fact that new dependencies weren't being added
cleanly to files that already had unused dependencies.
Fixesgolang/go#39041
Change-Id: I96ee0052d8d29a25e24f0bda9688e780a0fa7442
Reviewed-on: https://go-review.googlesource.com/c/tools/+/241443
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
If the config changes in non-module mode, don't look at the nonexistant mod file.
I actually caught this case after review but didn't finish the job.
Fixesgolang/go#40121.
Change-Id: Ic888f7eab5f882e6ca79b046b5a3fb37b3b19e5c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/241520
Run-TryBot: Heschi Kreinick <heschi@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Changing build flags (-modfile) while work is happening in the
background causes races. Explicitly detect relevant configuration
changes and only modify the ProcessEnv then, when the resolver is
inactive after the call to ClearForNewMod.
This still leaves a very small window for a race: if refreshProcessEnv
has already captured env but not yet started priming the cache, it may
race with the modification. But I don't expect it to be a problem in
practice.
Fixesgolang/go#39865.
Change-Id: I31c79f39be55975fee14aa0e548b060c46cdd882
Reviewed-on: https://go-review.googlesource.com/c/tools/+/241317
Run-TryBot: Heschi Kreinick <heschi@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
CL 239754 eagerly initialized the environment. This turns out to be a
problem for gopls, which calls ApplyFixes with no ProcessEnv.
Reinitializing it every time seriously harmed the performance of
unimported completions. Move back to lazy initialization.
Working with invalid options has caused a lot of confusion; this is only
the most recent. We have to maintain backwards compatibility in the
externally visible API, but everywhere else we can require fully
populated options. That includes the source byte slice and the options.
LocalPrefix is really more of an Option than an attribute of the
ProcessEnv, and it is needed in ApplyFixes where we really don't want to
have to pass a ProcessEnv. Move it up to Options.
Change-Id: Ib9466c375a640a521721da4587091bf93bbdaa3c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/241159
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
CL 226639 changed the positions of the go.mod diagnostics (in a
negligible way), but the tests are quite brittle and can't handle the
different position. Rewrite this test as a regression test to handle it.
The special // indirect marker can be removed from the go/expect package
as a result, since it was only used in this one place.
Change-Id: I7d9a62e32e53d477838e65673635ed231c07b659
Reviewed-on: https://go-review.googlesource.com/c/tools/+/240691
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change permits starting gopls without a root URI or any workspace
folders. If no view is found for an opened file, we try to create a new
view based on the module root of that file. In GOPATH mode, we just
use the directory containing the file.
I wrote a regtest for this by adding a new configuration that gets
propagated to the sandbox. I'm not sure if this is the best way to do
that, so I'll let Rob advise.
Fixesgolang/go#34160
Change-Id: I3deca3ac1b86b69eba416891a1c28fd35658a2ed
Reviewed-on: https://go-review.googlesource.com/c/tools/+/240099
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Completion could be slow due to calls to astutil.PathEnclosingInterval
for every candidate during formatting. There were two reasons we
called PEI:
1. To properly render type alias names, we must refer to the AST
because the alias name is not available in the typed world.
Previously we would call PEI to find the *type.Var's
corresponding *ast.Field, but now we have a PosToField cache that
lets us jump straight from the types.Object's token.Pos to the
corresponding *ast.Field.
2. To display an object's documentation we must refer to the AST. We
need the object's declaring node and any containing ast.Decl. We
now maintain a special PosToDecl cache so we can avoid the PEI call
in this case as well.
We can't use a single cache for both because the *ast.Field's position
is present in both caches (but points to different nodes). The caches
are memoized to defer generation until they are needed and to save
work creating them if the *ast.Files haven't changed.
These changes speed up completing the fields of
github.com/aws/aws-sdk-go/service/ec2 from 18.5s to 45ms on my laptop.
Fixesgolang/go#37450.
Change-Id: I25cc5ea39551db728a2348f346342ebebeddd049
Reviewed-on: https://go-review.googlesource.com/c/tools/+/221021
Run-TryBot: Muir Manders <muir@mnd.rs>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Add a symbolStyle configuration option, and use it to parameterize the
following behavior when computing workspace symbols:
+ package (default): include package name in the workspace symbol.
+ full: fully qualify the symbol by import path
+ dynamic: use as the symbol the shortest suffix of the full path that
contains the match.
To implement this, expose package name in the source.Package interface.
To be consistent with other handling in the cache package, define a new
cache.packageName named string type, to avoid confusion with packageID
or packagePath (if confusing those two identifiers was a problem, surely
it is a potential problem for package name as well).
Change-Id: Ic8ed6ba5473b0523b97e677878e5e6bddfff10a7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/236842
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Paul Jolly <paul@myitcv.org.uk>
Previously, our file watching only considered the root directory of the
view, which may not include the entire module or its replaced
dependencies. Now we expand our watching to include the whole module.
As part of testing this, I noticed that VS Code's file watcher actually
only sends updates for files in the workspace, even if we request
notifications for all files in the module. I filed an issue to ask about
this: https://github.com/microsoft/vscode-languageserver-node/issues/641.
Change-Id: I9499d31aff273f69e9c117511e7985ff58b7fdc4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/239198
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This CL got away from me a little.
For a number of reasons, the existing goimports API of passing in values
for various GO* values was not working. For one, the number of necessary
variables kept growing. For another, we tried to avoid calling `go env`
in GOPATH mode by using `build.Default`, but that turns out to be buggy;
see golang/go#39838. And finally, it created massive confusion about
whether the values were intended to be read from the OS environment, or
fully evaluated by the `go` command.
There are only two users of the internal imports API, so there really
shouldn't need to be more than two modes. For the command line tool, we
have to call `go env` to deal with the `go/build` bug. So we just do it.
Tests use that same path, but can augment the enviroment to set
themselves up. In contrast, `gopls` needs to fully specify the
environment. It can simply pass in the fully evaluated GO* values.
Finally, make the change I was actually here to make: propagate
GOMODCACHE and use it where appropriate.
Fixesgolang/go#39761.
Change-Id: I720c69839d91d66d98e94dfc5f065ba0279c5542
Reviewed-on: https://go-review.googlesource.com/c/tools/+/239754
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change separates out different functions of mod handles.
Previously, we had ModHandle and ModTidyHandle. ModHandle was used to
parse go.mod files and get the results of `go mod why` and possible
dependency upgrades.
Now, we factor this out into 4 handles: ParseModHandle, ModWhyHandle,
ModUpgradeHandle, and ModTidyHandle. This allows each handle to be
specific to its own functionality. It also simplifies the code a bit,
as the handles can be written in terms of ParseModHandles instead of
FileHandles.
I may have some follow-up CLs to refactor the `go mod tidy` logic out of
the cache package, though I'm no longer certain that that's a good
choice.
Change-Id: I8e12299dfdda7bb61b05903d9aa474461d7f4836
Reviewed-on: https://go-review.googlesource.com/c/tools/+/239117
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
These are commands whose changes should be reflected in the existing
go.mod file, as they do not provide edits. Add a third way of running
the go command, explicitly without -modfile. Update the regression test
accordingly.
Change-Id: I866b5db83b504fae190e58c306c01a7a4296672d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/239200
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
The return of IgnoreFile. We continue using go list's ignore rules,
but only apply them to the part of the path underneath the source root.
This should be fixed to include replace targets once we have them.
Change-Id: I054fee8c12fc860a279b0d0c1fd670f44d78a63f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/239288
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
The per-package stats have proven pretty useful, and I don't want to
have to teach users how to save them. Create zip files and add them in.
Since some users may be sensitive about revealing any information about
the code, generate two variants: one with package names, and one
without.
Change-Id: Icc5631b4cebbbabfdd2fcea4a4cdf4f205dbcab9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/239037
Run-TryBot: Heschi Kreinick <heschi@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
Several fixes related to GOPRIVATE handling and links:
+ In Go source, fix links matching GOPRIVATE for external modules.
Previously, in these cases we'd try to match <mod>@v1.2.3/<suffix>,
which wasn't the correct input into the GOPRIVATE matching algorithm.
+ Similarly check GOPRIVATE for go.mod require statement hovers.
+ Likewise, for documentLink requests (both mod and source).
+ Move the existing hover regtest to link_test.go, and expand to cover
all these cases.
Along the way, I encountered a couple apparent bugs, which I fixed:
+ Correctly handle the case where there is only one require in a go.mod
file. This was exercised by the regtest, so took some debugging.
+ Only format links [like](this) if the requested format is actually
markdown.
Fixesgolang/go#36998
Change-Id: I92011821f646f2a7449dcca619483f83bdeb54b0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/238029
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
While working in this code, I was confused by the fact that modHandle
and modData were used for both ModHandle and ModTidyHandle. Separate out
the two so it's a little more clear. This is mostly a copy-paste, with a
few fields renamed to simplify them.
Change-Id: I20ea11c32a624fd250eabf901d09ebb05fbad062
Reviewed-on: https://go-review.googlesource.com/c/tools/+/238337
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Refactor internal/lsp/cache to use a new temporary go.mod file for each
go command invocation. This cleans up the abstraction in the source
package, as we no longer are aware of temporary go.mod files.
This will also fix the raciness of reusing the same temporary go.mod
file for each invocation.
Updates golang/go#37318.
Fixesgolang/go#39504.
Change-Id: I90bc17a678b5df222ab598c8f7dbf6c6fdd393f6
Reviewed-on: https://go-review.googlesource.com/c/tools/+/237517
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
When a workspace package is deleted, we need to stop trying to load it.
Check that every workspace package still has at least one .go file when
we copy them between snapshots.
I think this is correct, but even if it's not, orphaned file loading
should patch it up.
Fixesgolang/go#38977.
Change-Id: I0b11010a40aac09f619f54b5ba02e2467b15a36c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/238028
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
In GOPATH mode, you can import example.com/foo even if it has a go.mod
that says its path is example.com/foo/v2. Adjust our import path
resolution to support that case.
Fixesgolang/go#39560.
Change-Id: I758a2220c579c4374084365c3a78a3a2bbd14b01
Reviewed-on: https://go-review.googlesource.com/c/tools/+/238260
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Limiting the Config to the view seems reasonable, considering that it is
only used to run the `go` command. I prefer just having the cache run
go commands, so that source doesn't have to deal with the environment.
This also enables CL 237517.
Change-Id: I639c082592de30e9682dc25cdd12c7751ddb4f97
Reviewed-on: https://go-review.googlesource.com/c/tools/+/237600
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
We were marking normal tests as workspace packages, but pruning x_tests.
Don't do that.
Fixesgolang/go#39578.
Change-Id: Ia8eceea38e63ac17e40f50d6837de9c7a668469b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/237943
Run-TryBot: Heschi Kreinick <heschi@google.com>
Reviewed-by: zikaeroh <zikaeroh@gmail.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Calculate and display very crude memory usage statistics. This is
complicated by various levels of sharing and indirection, so the numbers
should be taken with *large* grains of salt and interpreted mostly by
experts.
Still, the results are interesting and helpful.
Change-Id: Ia9aff974c7d5fddd63df0cfd5cecc08ead33cf84
Reviewed-on: https://go-review.googlesource.com/c/tools/+/236163
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
ModHandle races with the initial workspace load if the go.mod file does
not yet exist. We should await for the initial workspace load to
complete before proceeding with update codelenses, etc.
Part of trying to figure out the flakes in golang/go#39504.
Also a few staticcheck fixes, and fix the Windows line endings in
fill_struct.go, because `git gofmt` complains.
Change-Id: Ide21a47137390792d1afb924740cff0bb6f0b764
Reviewed-on: https://go-review.googlesource.com/c/tools/+/237419
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
The error messages from view cancellation clutter up the logs when
testing, especially if you're running a single subtest.
A few quick staticcheck fixes in the CL also.
Change-Id: Ia1ed5360ac754023c589ed526ec0ed3e94a79b2f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/237637
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Ignore ignored the builtin package and files that start with _. The
latter should already be ignored by "go list". The former seems
like too much effort to me. People shouldn't edit random parts of the
stdlib, and ignoring changes to (e.g.) the Error interface seems like
the least of the trouble they can get themselves into.
Remove it for now. If we get complains I'll re-add it, probably by
rejecting the write entirely somewhere.
We incidentally relied on this in the identifier functions; change those
to treat the builtin package slightly more specially.
Change-Id: I005b02a66b1a987c50a3074d53a2d28ff07d3324
Reviewed-on: https://go-review.googlesource.com/c/tools/+/237597
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
