When we build the encode engine for a recursive type, we
mustn't disregard the indirections or we can try to reuse an
engine at the wrong indirection level.
Fixes#3026.
R=golang-dev, dsymonds
CC=golang-dev
https://golang.org/cl/5675087
Fix by setting the element type if we discover it's zero while building.
We could have fixed this better with foresight by doing the id setting in a
different sequence, but doing that now would break binary compatibility.
Fixes#2995.
R=golang-dev, dsymonds
CC=golang-dev
https://golang.org/cl/5675083
I am making a unilateral decision here. I could also settle for returning 0,
as long it's documented, but I argue that it's equivalent to an index
out of bounds.
Fixes#2892.
R=golang-dev, dsymonds, rsc
CC=golang-dev
https://golang.org/cl/5676079
1, strip last path separator from $GOROOT
The user might define GOROOT=/path/to/go/, but then the dir
check in defaulttarg() will always complain the current dir
is not within $GOROOT/src/.
2, resolve symlinks in the default goroot
Or if getcwd() returns a fully-resolved path, the check in
defaulttarg() will always fail.
R=rsc
CC=golang-dev
https://golang.org/cl/5649073
The panic happens if -benchtime flag is specified:
go test -bench=EndToEndAsyncHTTP -benchtime=120
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/5677075
Convert cryptotype to general go1rename fix.
Add os.Exec -> syscall.Exec fix along with new
URL fixes.
Fixes#2946.
R=golang-dev, r, dsymonds
CC=golang-dev
https://golang.org/cl/5672072
We want to be able to implement good Windows support
after Go 1. Right now Windows tries to use Unix domain
sockets, and I'd rather just have it not be available.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/5671076
The set of errors forwarded by the os package varied with system and
was therefore non-portable.
Three helpers added for portable error checking: IsExist, IsNotExist, and IsPermission.
One or two more may need to come, but let's keep the set very small to discourage
thinking about errors that way.
R=mikioh.mikioh, gustavo, r, rsc
CC=golang-dev
https://golang.org/cl/5672047
It was being skipped due to an oversight.
Also adjust naming parameters for map type construction - makes debugging easier.
Prelude to issue 3026.
R=golang-dev, dsymonds
CC=golang-dev
https://golang.org/cl/5674071
Clang 3.1 has more warnings enabled by default than GCC.
Combined with -Werror, they cause the build to fail
unnecessarily. if the name of our compiler ends in "clang",
add the necessary extra -Wno options. Ideally we would add
these flags unconditionally, as GCC is supposed to ignore
unknown -Wno flags, but apple's llvm-gcc doesn't.
Fixes#2878.
R=rsc, dave
CC=golang-dev
https://golang.org/cl/5673055
Periodically browse MHeap's freelists for long unused spans and release them if any.
Current hardcoded settings:
- GC is forced if none occured over the last 2 minutes.
- spans are handed back after 5 minutes of uselessness.
SysUnused (for Unix) is a wrapper on madvise MADV_DONTNEED on Linux and MADV_FREE on BSDs.
R=rsc, dvyukov, remyoudompheng
CC=golang-dev
https://golang.org/cl/5451057
An unindented XML example is hard to follow. MarshalIndent
allows moving the example over to a test file (and fixing it).
R=golang-dev, r, gustavo, r, rsc
CC=golang-dev
https://golang.org/cl/5674050
It depended on old behavior of functions in structs.
Solved by adding a boolean method to check .Run != nil.
R=golang-dev, adg, r, rsc
CC=golang-dev
https://golang.org/cl/5674062
go/doc: move Examples to go/ast
cmd/go: use go/doc to read examples
src/pkg: update examples to use new convention
This is to make whole file examples more readable. When presented as a
complete function, preceding an Example with its output is confusing.
The new convention is to put the expected output in the final comment
of the example, preceded by the string "output:" (case insensitive).
An idiomatic example looks like this:
// This example demonstrates Foo by doing bar and quux.
func ExampleFoo() {
// example body that does bar and quux
// Output:
// example output
}
R=rsc, gri
CC=golang-dev
https://golang.org/cl/5673053
Whoops. Consume the body of the first request
before making the subsequent /quit request.
R=golang-dev, untheoretic
CC=golang-dev
https://golang.org/cl/5674054
Also: Simplified handling of selector expressions. As a result, complicated
multi-line expressions containing selectors and calls/indices with arguments
broken accross lines don't get indented the same way as before, but the change
is minimal (see tests) and there's no such code in the std library. It seems
a worthwhile compromise given the much simpler code.
Applied gofmt -w $GOROOT/src $GOROOT/misc .
Fixes#1847.
R=rsc
CC=golang-dev
https://golang.org/cl/5675062
Makes it possible to run
GOARCH=amd64 make.bash
GOARCH=386 make.bash --no-clean
to avoid deleting some of the work done by the first one.
R=golang-dev
CC=golang-dev
https://golang.org/cl/5673056
Changeset 36c9c7810f14 broke support for grsec-patched kernels.
Those do not give back the address requested without MAP_FIXED,
so when verifying an mmap without this flag for success, the
resulting address must not be compared against the requested
address since it may have succeeded at a different location.
R=golang-dev, rsc, gustavo, iant
CC=golang-dev
https://golang.org/cl/5650072
Apparently some distros don't let you ptrace attach
to your own existing processes.
Run strace on the child directly, instead, which
reportedly is more often allowed, and makes the
code simpler too.
R=golang-dev, n13m3y3r
CC=golang-dev
https://golang.org/cl/5675050
Before this, make.bash --dist-tool would fail,
because $GOROOT/bin/tool was being mkdir'd
instead of $GOROOT/pkg/tool/linux_amd64.
R=rsc
CC=golang-dev
https://golang.org/cl/5666046
- if a package path leads to subdirectories only,
show command instead, if any
- to force documentation for a command, use the
cmd/ prefix, as in: godoc cmd/go
(note that for the go command, the prefix is
not required since there is no actual go library
package at the moment)
Fixes#3012.
R=rsc
CC=golang-dev
https://golang.org/cl/5665049
* add -work option to save temporary files (Fixes issue 2980)
* fix go test -i to work with cgo packages (Fixes issue 2936)
* do not overwrite/remove empty directories or non-object
files during build (Fixes issue 2829)
* remove package main vs package non-main heuristic:
a directory must contain only one package (Fixes issue 2864)
* to make last item workable, ignore +build tags for files
named on command line: go build x.go builds x.go even
if it says // +build ignore.
* add // +build ignore tags to helper programs
R=golang-dev, r, r
CC=golang-dev
https://golang.org/cl/5674043
before after
go test -short time 4.144s 1.215s
go test -short runtime 1.315s 0.351s
go test -short -cpu=1,2,4 runtime 4.376s 1.266s
Partially solves issue 3015.
R=golang-dev, r
CC=golang-dev, remy
https://golang.org/cl/5673045
This lets us get rid of the OS-dependent implementations
of SyscallError. The name "Err" was chosen to match the
PathError type.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/5651084
This change shows all the information present
in the Time value (now including fractional seconds)
and also arranges the fields so that, within a single time zone,
string comparison and time comparison agree.
R=golang-dev, rogpeppe, r
CC=golang-dev
https://golang.org/cl/5654078
It is possible that Linux and Windows copy the FP control word
from the parent thread when creating a new thread. Empirically,
Darwin does not. Reset the FP control world in all cases.
Enable the floating-point strconv test.
Fixes#2917 (again).
R=golang-dev, r, iant
CC=golang-dev
https://golang.org/cl/5660047
Once we've evicted all the blocked I/O, the ref count
should go to zero quickly, so it should be safe to
postpone the close(2) until then.
Fixes#1898.
Fixes#2116.
Fixes#2122.
R=golang-dev, mikioh.mikioh, bradfitz, fullung, iant
CC=golang-dev
https://golang.org/cl/5649076
Filed issue 3016 to fix this, but I really want
to see a "ok" in the Windows column so we
know what is and is not working.
R=golang-dev, dsymonds
CC=golang-dev
https://golang.org/cl/5658050
Now with a bit more paranoia and lower number of requests
to keep it under the default OS X 256 fd limit.
R=golang-dev, dsymonds, rsc
CC=golang-dev
https://golang.org/cl/5659051
It's not as pretty, but it deletes some irrelevant information from the
printout and avoids a dependency.
It also means the test binary will stop if a test panics. That's a feature,
not a bug.
Any output printed by the test appears before the panic traceback.
before:
--- FAIL: TestPanic (0.00 seconds)
fmt_test.go:19: HI
testing.go:257: runtime error: index out of range
/Users/r/go/src/pkg/testing/testing.go:257 (0x23998)
_func_003: t.Logf("%s\n%s", err, debug.Stack())
/Users/r/go/src/pkg/runtime/proc.c:1388 (0x10d2d)
panic: reflect·call(d->fn, d->args, d->siz);
/Users/r/go/src/pkg/runtime/runtime.c:128 (0x119b0)
panicstring: runtime·panic(err);
/Users/r/go/src/pkg/runtime/runtime.c:85 (0x11857)
panicindex: runtime·panicstring("index out of range");
/Users/r/go/src/pkg/fmt/fmt_test.go:21 (0x23d72)
TestPanic: a[10]=1
/Users/r/go/src/pkg/testing/testing.go:264 (0x21b75)
tRunner: test.F(t)
/Users/r/go/src/pkg/runtime/proc.c:258 (0xee9e)
goexit: runtime·goexit(void)
FAIL
after:
--- FAIL: TestPanic (0.00 seconds)
fmt_test.go:19: HI
panic: runtime error: index out of range [recovered]
panic: (*testing.T) (0xec3b0,0xf8400001c0)
goroutine 2 [running]:
testing._func_003(0x21f5fa8, 0x21f5100, 0x21f5fb8, 0x21f5e88)
/Users/r/go/src/pkg/testing/testing.go:259 +0x108
----- stack segment boundary -----
fmt_test.TestPanic(0xf8400001c0, 0x27603728)
/Users/r/go/src/pkg/fmt/fmt_test.go:21 +0x6b
testing.tRunner(0xf8400001c0, 0x18edb8, 0x0, 0x0)
/Users/r/go/src/pkg/testing/testing.go:264 +0x6f
created by testing.RunTests
/Users/r/go/src/pkg/testing/testing.go:343 +0x76e
goroutine 1 [chan receive]:
testing.RunTests(0x2000, 0x18edb8, 0x2400000024, 0x100000001, 0x200000001, ...)
/Users/r/go/src/pkg/testing/testing.go:344 +0x791
testing.Main(0x2000, 0x18edb8, 0x2400000024, 0x188a58, 0x800000008, ...)
/Users/r/go/src/pkg/testing/testing.go:275 +0x62
main.main()
/var/folders/++/+++Fn+++6+0++4RjPqRgNE++2Qk/-Tmp-/go-build743922747/fmt/_test/_testmain.go:129 +0x91
exit status 2
R=rsc, dsymonds
CC=golang-dev
https://golang.org/cl/5658048
This CL makes it possible to run make.bash with
GOOS and GOARCH set to something other than
the native host GOOS and GOARCH.
As part of the CL, the tool directory moves from bin/tool/
to pkg/tool/goos_goarch where goos and goarch are
the values for the host system (running the build), not
the target. pkg/ is not technically appropriate, but C objects
are there now tool (pkg/obj/) so this puts all the generated
binaries in one place (rm -rf $GOROOT/pkg cleans everything).
Including goos_goarch in the name allows different systems
to share a single $GOROOT on a shared file system.
Fixes#2920.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/5645093
Generates an infinite stream (at least >1GB) of:
=== RUN TestTransportPersistConnLeak
2012/02/13 22:20:19 http: Accept error: accept tcp 127.0.0.1:63972:
too many open files
2012/02/13 22:20:19 http: Accept error: accept tcp 127.0.0.1:63972:
too many open files
2012/02/13 22:20:19 http: Accept error: accept tcp 127.0.0.1:63972:
too many open files
2012/02/13 22:20:19 http: Accept error: accept tcp 127.0.0.1:63972:
too many open files
2012/02/13 22:20:19 http: Accept error: accept tcp 127.0.0.1:63972:
too many open files
2012/02/13 22:20:19 http: Accept error: accept tcp 127.0.0.1:63972:
too many open files
2012/02/13 22:20:19 http: Accept error: accept tcp 127.0.0.1:63972:
too many open files
2012/02/13 22:20:19 http: Accept error: accept tcp 127.0.0.1:63972:
too many open files
2012/02/13 22:20:19 http: Accept error: accept tcp 127.0.0.1:63972:
too many open files
2012/02/13 22:20:19 http: Accept error: accept tcp 127.0.0.1:63972:
too many open files
R=bradfitz
CC=golang-dev
https://golang.org/cl/5661052
1, IMO, the fatal error "regfree: not a register" from 5g when
compiling runtime/debug.go is due to gcc miscompile, it doesn't
show up when compiled with -O0. But I still haven't thought of
a way to fix this, should all ARM builds be built with -O0?
2, fixed mksysnum_linux.pl, so zsysnum_linux_arm.go no longer
needs to be hand-generated.
3, regen all in pkg syscall for Linux/ARM on Debian 6.0
This CL is somewhat big, I'd like to split it if necessary.
R=rsc, dave
CC=golang-dev
https://golang.org/cl/5659044
This was an implementation detail that snuck into the public interface.
*Writer.Create gives you an io.Writer, the *Writer itself was never
meant to be written to.
R=golang-dev, dsymonds, r
CC=golang-dev
https://golang.org/cl/5654076
Makes files like src/pkg/syscall/ztypes_linux_amd64.go easier to read.
(The copy that is checked in predates the //line output mode,
so this also preserves the status quo.)
R=golang-dev, iant, gri
CC=golang-dev
https://golang.org/cl/5655068
Also update build to be able to run mkbuiltin again.
The export form has changed a little, so builtin.c has
more diffs than unsafe.go.
In CL 5650069, I just edited the documentation, a rarely
successful method of change.
R=ken2
CC=golang-dev
https://golang.org/cl/5662043
Restore package os/signal, with new API:
Notify replaces Incoming, allowing clients
to ask for certain signals only. Also, signals
go to everyone who asks, not just one client.
This could plausibly move into package os now
that there are no magic side effects as a result
of the import.
Update runtime for new API: move common Unix
signal handling code into signal_unix.c.
(It's so easy to do this now that we don't have
to edit Makefiles!)
Tested on darwin,linux 386,amd64.
Fixes#1266.
R=r, dsymonds, bradfitz, iant, borman
CC=golang-dev
https://golang.org/cl/3749041
1) Remove the Reset() member in crypto/aes and crypto/des (and
document the change).
2) Turn several empty error structures into vars. Any remaining error
structures are either non-empty, or will probably become so in the
future.
3) Implement SetWriteDeadline for TLS sockets. At the moment, the TLS
status cannot be reused after a Write error, which is probably fine
for most uses.
4) Make crypto/aes and crypto/des return a cipher.Block.
R=rsc, r
CC=golang-dev
https://golang.org/cl/5625045
one trie lookup per rune is needed. See forminfo.go for a description
of the new format. Also included leading and trailing canonical
combining class in decomposition information. This will often avoid
additional trie lookups.
R=r, r
CC=golang-dev
https://golang.org/cl/5616071
This is not the finished product,
but a good checkpoint from which to
proceed with further development.
R=golang-dev, dsymonds, r
CC=golang-dev
https://golang.org/cl/5571061
8g/cgen.c
print format type mismatch
8l/asm.c
resoff set and not used
gc/pgen.c
misleading comparison INT > 0x80000000
gc/reflect.c
dalgsym must be static to match forward declaration
gc/subr.c
assumed_equal set and not used
hashmem's second argument is not used
gc/walk.c
duplicated (unreachable) code
R=rsc
CC=golang-dev
https://golang.org/cl/5651079
hammerCompareAndSwapPointer64 was only passing on
little-endian systems. hammerCompareAndSwapPointer32 was
writing 8 bytes to a uint32 value on the heap.
R=rsc, dvyukov
CC=golang-dev
https://golang.org/cl/5654065
You could argue for changing all the others, but
Linux is outvoted, and the only time it matters
is when newfd==-1, in which case you can call Dup.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/5650073
Fixes#2776.
There was a previous attempt at CL 5592043 but that
seems to have stalled. This one is simpler, and more up to date
(correct handling of spdy, for example).
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/5645091
The Date-Modified header truncates sub-second precision, so
use mtime < t+1s instead of mtime <= t to check for unmodified.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/5655052
Among other things, this avoids putting a testing.go:nnn:
prefix on every line of the stack trace.
R=golang-dev, r, dsymonds, r
CC=golang-dev
https://golang.org/cl/5651081
unsafe: delete Typeof, Reflect, Unreflect, New, NewArray
Part of issue 2955 and issue 2968.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/5650069
Cannot reproduce the failure locally,
but add explicit test in case some other
machine can.
Fixes#2917 (for now).
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/5651071
I thought that -timeout was per-test, but it is for the
whole program execution, so cmd/go can adjust its timer
(also for whole program execution) accordingly.
Fixes#2993.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/5650070
Also, echo cmd/dist during bootstrap build
Makes that phase look like all the others.
Fixes#2908.
R=golang-dev, alex.brainman, bradfitz
CC=golang-dev
https://golang.org/cl/5655065
Otherwise lockorder may be misaligned, since lockorder is a
list of pointers and pollorder is a list of uint16.
Discovered running gccgo (which uses a modified copy of this
code) on SPARC.
R=golang-dev, gri
CC=golang-dev
https://golang.org/cl/5655054
If the values being compared have different concrete types,
then they're clearly unequal without needing to invoke the
actual interface compare routine. This speeds tests for
specific values, like if err == io.EOF, by about 3x.
benchmark old ns/op new ns/op delta
BenchmarkIfaceCmp100 843 287 -65.95%
BenchmarkIfaceCmpNil100 184 182 -1.09%
Fixes#2591.
R=ken2
CC=golang-dev
https://golang.org/cl/5651073
Fix it twice: reuse registers more aggressively in cgen abop,
and also release R14 and R15, which are no longer m and g.
Fixes#2669.
R=ken2
CC=golang-dev
https://golang.org/cl/5655056
This CL changes default SOL_SOCKET settings to mitigate connect
failure on OpenBSD or similar platforms which support randomized
transport protocol port number assignment.
Fixes#2830.
R=rsc, jsing
CC=golang-dev
https://golang.org/cl/5648044
Should be obviously correct. Includes minimal test case.
A future CL should clear up the logic around typecheckok and importpkg != nil someday.
R=rsc, dsymonds, rsc
CC=golang-dev
https://golang.org/cl/5652057
make syscall.ProcAttr.Files be []uintptr
all.bash passes on Linux.
things seem to compile on GOOS={darwin,windows}
R=golang-dev, mattn.jp, alex.brainman, rsc
CC=golang-dev
https://golang.org/cl/5653055
If a printer is configured with the SourcePos mode
set, it will emit //-line comments as necessary to
ensure that the result - if reparsed - reflects the
original source position information.
This change required a bit of reworking of the
output section in printer.go. Specifically:
- Introduced new Config mode 'SourcePos'.
- Introduced new position 'out' which tracks the
position of the generated output if it were read
in again. If there is a discrepancy between out
and the current AST/source position, a //line
comment is emitted to correct for it.
- Lazy emission of indentation so that //line
comments can be placed correctly. As a result,
the trimmer will have to do less work.
- Merged writeItem into writeString.
- Merged writeByteN into writeByte.
- Use a []byte instead of a byte.Buffer both in the
printer and in the trimmer (eliminates dependency).
Also: introduced explicit printer.Mode type (in
sync w/ parser.Mode, scanner.Mode, etc.)
Runs all tests. Applied gofmt to src, misc w/o changes.
Fixes#1047.
Fixes#2697.
R=rsc, rsc
CC=golang-dev
https://golang.org/cl/5643066
(*Writer, error) if they take a compression level, and *Writer otherwise.
Rename gzip's Compressor and Decompressor to Writer and Reader, similar to
flate and zlib.
Clarify commentary when writing gzip metadata that is not representable
as Latin-1, and fix io.EOF comment bug.
Also refactor gzip_test to be more straightforward.
Fixes#2839.
R=rsc, r, rsc, bradfitz
CC=golang-dev
https://golang.org/cl/5639057
The comment on IsOneOf regarding Latin-1 was an implementation detail:
when the function is called internally, that condition is true. It used to matter,
but now the comment is a dreg. The function works fine if the character is
Latin-1, so we just delete the comment.
Fixes#2966.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/5655047
Delete O_NDELAY, O_NONBLOCK, O_NOCTTY, O_ASYNC.
Clean up some docs.
Rename ShellExpand -> ExpandEnv.
Make NewFile take a uintptr; change File.Fd to return one.
(for API compatibility between Unix and Windows)
Fixes#2947
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/5655045
godoc doesn't have the fu to present the example well, but this gives
us an example of an example to develop example fu.
Fixes#2840.
R=golang-dev, gri
CC=golang-dev
https://golang.org/cl/5645063
If the database driver supports the Execer interface but returns
ErrSkip, calling Exec on a transaction was returning the error instead
of using the slow path.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/5654044
strings.Reader is already stateful and read-only.
This permits a *Reader with http.ServeContent.
R=golang-dev, r, rsc, rsc
CC=golang-dev
https://golang.org/cl/5639068
Higher level tests for the pointer parameters
and scanning, complementing the existing ones
included in the previous CL.
R=golang-dev, dsymonds
CC=golang-dev
https://golang.org/cl/5646050
Put the 'go test' flags into 'go help test', so 'go help testflags'
is about the flags for the compiled test binary.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/5641060
Made the godoc overview section oddly indented
compared to the other code blocks.
R=golang-dev, mikioh.mikioh, dsymonds, r
CC=golang-dev
https://golang.org/cl/5645060
Issue 2856 asks for a rename of a few methods to a
more idiomatic Go style. This is a very early API
that evolved organically throughout the years.
Together with the fact that ErrorVectors were embedded
in other data structures (e.g. Parser), just renaming
methods (e.g. GetError -> Error) would lead to undesired
behavior (e.g., Parser would act like an Error). Instead,
cleaned up API a bit more:
- removed ErrorVector in favor of ErrorList (already
present)
- simplified Scanner.Init by making the error handler a
function instead of requiring an ErrorHandler implementation
- adjusted helper functions accordingly
- updated Go 1 doc
Fixes#2856.
R=rsc
CC=golang-dev
https://golang.org/cl/5624047
On 64 bit UML it is not possible to reserve memory at 0xF8<<32.
Detect when linux cannot use these high virtual memory addresses
and drop back to the 32 bit memory allocator.
R=rsc, cw
CC=golang-dev
https://golang.org/cl/5634050
Otherwise, the registration semantics are
init-order-dependent, which I was trying very hard
to avoid in the API. This may break broken programs.
Fixes#2900.
R=golang-dev, r, bradfitz, dsymonds, balasanjay, kevlar
CC=golang-dev
https://golang.org/cl/5644051
Same idea as heap profile: how did each thread get created?
Low memory (256 bytes per OS thread), high reward for
programs that suddenly have many threads running.
Fixes#1477.
R=golang-dev, r, dvyukov
CC=golang-dev
https://golang.org/cl/5639059
This changes makes constant propagation compare 'from' values using node
pointers rather than symbol names when checking to see whether a set
operation is redundant. When a function is inlined multiple times in a
calling function its arguments will share symbol names even though the values
are different. Prior to this fix the bug409 test would hit a case with 6g
where an LEAQ instruction was incorrectly eliminated from the second inlined
function call. 8g appears to have had the same bug, but the test did not fail
there.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/5646044
- convert from nil pointers to the nil interface{}
- dereference non-nil pointers
- convert from nil interface{}s to nil pointers
- allocate pointers for non-nil interface{}s
- tests for all of the above
R=golang-dev, bradfitz, rsc, rogpeppe
CC=golang-dev
https://golang.org/cl/5630052
encoding/xml: handle time.Time as recognized type
The long term plan is to define an interface that time.Time
can implement and that encoding/xml can call, but we are
not going to try to define that interface before Go 1.
Instead, special-case time.Time in package xml, because
it is such a fundamental type, as a stop-gap.
The eventual methods will behave this way.
Fixes#2793.
R=golang-dev, r, r, n13m3y3r
CC=golang-dev
https://golang.org/cl/5634051
This also changes the behavior of attribute marshalling so
that strings and byte slices are marshalled even if empty.
The omitempty flag may be used to obtain the previous behavior.
Fixes#2899.
R=rsc
CC=golang-dev
https://golang.org/cl/5645050
The function has a bizarre signature: it was the only public function there
that exposed the reflect package. Also, its definition is peculiar and hard to
explain. It doesn't merit being exported.
This is an API change but really, it should never have been exported and
it's certain very few programs will depend on it: it's too weird.
Fixes#2846.
R=golang-dev, gri, bradfitz
CC=golang-dev
https://golang.org/cl/5639054
It complicates the interface unnecessarily.
Document this in go1.html.
Also update the go/doc Makefile.
Fixes#2836.
R=golang-dev, gri, bradfitz
CC=golang-dev
https://golang.org/cl/5642054
Be careful when printing line comments with incorrect
position information. Maintain additional state
impliedSemi: when set, a comment containing a newline
would imply a semicolon and thus placement must be
delayed.
Precompute state information pertaining to the next
comment for faster checks (the printer is marginally
faster now despite additional checks for each comment).
No effect on existing src, misc sources.
Fixes#1505.
R=rsc
CC=golang-dev
https://golang.org/cl/5598054
Also bring the names in doc.go in line with the source.
More radical resolutions are possible but require substantial internal
changes for very little benefit. Fixing it this way lets us keep the
embedding, which has a huge simplifying effect, and guarantees
binary compatibility.
Fixes#2848.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/5644045
Commands such as "dist version > VERSION" will cause
the shell to create an empty VERSION file and set dist's
stdout to its fd. dist in turn looks at VERSION and uses
its content if available, which is empty at this point.
Fix that by ignoring VERSION if it's empty.
Also prevent cmdversion from running findgoversion a
second time. It was already loaded by init.
R=adg, gustavo, rsc
CC=golang-dev
https://golang.org/cl/5639044
Specifically, remove simply where it is claiming that the
code or the action to be carried out is simple, since the
reader might disagree.
R=golang-dev, bradfitz, gri
CC=golang-dev
https://golang.org/cl/5637048
As a convenience to people working on the tools,
leave Makefiles that invoke the go dist tool appropriately.
They are not used during the build.
R=golang-dev, bradfitz, n13m3y3r, gustavo
CC=golang-dev
https://golang.org/cl/5636050
This is the same heuristic that build.ScanDir uses.
It avoids considering 'resource fork' files on OS X;
the resource for x.go is ._x.go.
R=gri
CC=golang-dev
https://golang.org/cl/5616073
Unexports runtime.MemStats and rename MemStatsType to MemStats.
The new accessor requires passing a pointer to a user-allocated
MemStats structure.
Fixes#2572.
R=bradfitz, rsc, bradfitz, gustavo
CC=golang-dev, remy
https://golang.org/cl/5616072
Passing the CGO_CFLAGS to cgo is required to make alternative include
directories work when building a cgo project.
R=rsc
CC=golang-dev
https://golang.org/cl/5635048
Multiplying by the low 32 bits was a bad idea
no matter what, but it was a particularly unfortunate
choice because those bits are 0 for small integer values.
Fixes#2883.
R=ken2
CC=golang-dev
https://golang.org/cl/5634047
Right now, GOTRACEBACK=0 means do not show any stack traces.
Unset means the default behavior (declutter by hiding runtime routines).
This CL makes GOTRACEBACK=2 mean include the runtime routines.
It avoids having to recompile the runtime when you want to see
the runtime in the tracebacks.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/5633050
Zip files may actually store symlinks, and that's represented
as a file with unix flag S_IFLNK and with its data containing
the symlink target name.
The other flags are being supported too. Now that the os package
has the full range of flags in a system agnostic manner, there's
no reason to discard that information.
R=golang-dev, adg, rogpeppe
CC=golang-dev
https://golang.org/cl/5624048
- fix documentation for NewBuffer and NewBufferString
- document and implement behavior of Truncate on invalid lengths
Fixes#2837.
R=rsc, adg
CC=golang-dev
https://golang.org/cl/5637044
- eliminate local Error type (a historical artifact)
- fix documentation of CopyN
- fix documentation of WriteString
Fixes#2859.
R=rsc, bradfitz
CC=golang-dev
https://golang.org/cl/5636046
This fix makes the goFilesPackage helper function print the errors from
package imports and exit similar to how the packagesForBuild function does.
Without this change, when invoking "go build *.go" with, for example,
an old import path, the following stack trace is generated:
panic: runtime error: invalid memory address or nil pointer dereference
goroutine 1 [running]:
go/build.(*Tree).PkgDir(...)
/opt/go/src/pkg/go/build/path.go:52 +0xfb
main.(*builder).action(...)
/opt/go/src/cmd/go/build.go:327 +0xb8
main.(*builder).action(...)
/opt/go/src/cmd/go/build.go:335 +0x208
main.runBuild(...)
/opt/go/src/cmd/go/build.go:129 +0x386
main.main()
/opt/go/src/cmd/go/main.go:126 +0x2d8
Fixes#2865.
R=rsc, dvyukov, r
CC=golang-dev
https://golang.org/cl/5624052
The practice encourages people to think this is the way to
create a bytes.Buffer when new(bytes.Buffer) or
just var buf bytes.Buffer work fine.
(html/token.go was missing the point altogether.)
R=golang-dev, bradfitz, r
CC=golang-dev
https://golang.org/cl/5637043
Flush stdout before writing to stderr, to avoid
reordering output.
Allow amd64 from uname -m (FreeBSD).
TBR=golang-dev
CC=golang-dev
https://golang.org/cl/5629051
goc2c moves here.
parallel builds like old makefiles (-j4).
add clean command.
add banner command.
implement Go version check.
real argument parsing (same as 6g etc)
Windows changes will be a separate CL.
R=golang-dev, bradfitz, iant
CC=golang-dev
https://golang.org/cl/5622058
Add // +build ignore to mkrunetype.c,
rename runetypebody to be .h since it is #included,
delete old runetypebody tables.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/5627043
Thanks to Andrey Mirtchovski for tracking this down.
This was broken by CL 5528077 which removed the InsertSemis
flag from go/scanner - as a result, semicolons are now always
inserted and the respective indexer code checked for the
wrong token.
Replaced the code by a direct identifier test.
R=rsc
CC=golang-dev
https://golang.org/cl/5606065
The go- is redundant now that the directory is required
to be inside $GOROOT. Rob LGTMed the idea.
R=golang-dev, gri
CC=golang-dev
https://golang.org/cl/5618044
This reduces the overhead necessary to work with OS-specific
file details, hides the implementation of FileStat, and
preserves the implementation-specific nature of Sys.
Expressions such as:
stat.(*os.FileInfo).Sys.(*syscall.Stat_t).Uid
fi1.(*os.FileStat).SameFile(fi2.(*os.FileStat))
Are now spelled as::
stat.Sys().(*syscall.Stat_t).Uid
os.SameFile(fi1, fi2)
R=cw, bradfitz, rsc
CC=golang-dev
https://golang.org/cl/5448079
dist is short for distribution. This is the new Go distribution tool.
The plan is to replace the Makefiles with what amounts to
'go tool dist bootstrap', although it cannot be invoked like
that since it is in charge of getting us to the point where we
can build the go command.
It will also add additional commands to replace bash scripts
like test/run (go tool dist testrun), eventually eliminating our
dependence on not just bash but all the Unix tools and all
of cygwin.
This is strong enough to build (cc *.c) and run (a.out bootstrap)
to build not just the C libraries and tools but also the basic
Go packages up to the bootstrap form of the go command
(go_bootstrap). I've run it successfully on both Linux and Windows.
This means that once we've switched to this tool in the build,
we can delete the buildscripts.
This tool is not nearly as nice as the go tool. There are many
special cases that turn into simple if statements or tables in
the code. Please forgive that. C does not enjoy the benefits
that we designed into Go.
I was planning to wait to do this until after Go 1, but the
Windows builders are both broken due to a bug in either
make or bash or both involving the parsing of quoted command
arguments. Make thinks it is invoking
quietgcc -fno-common -I"c:/go/include" -ggdb -O2 -c foo.c
but bash (quietgcc is a bash script) thinks it is being invoked as
quietgcc -fno-common '-Ic:/go/include -ggdb' -O2 -c foo.c
which obviously does not have the desired effect. Rather than fight
these clumsy ports, I accelerated the schedule for the new tool.
We should be completely off cygwin (using just the mingw gcc port,
which is much more standalone) before Go 1.
It is big for a single CL, and for that I apologize. I can cut it into
separate CLs along file boundaries if people would prefer that.
R=golang-dev, adg, gri, bradfitz, alex.brainman, dsymonds, iant, ality, hcwfrichter
CC=golang-dev
https://golang.org/cl/5620045
The change to -m is the only one necessary
to close the issue. The others are useful
to know about when debugging but shouldn't
be in the usage message since they may go
away or change at any time.
Fixes#2802.
R=lvd, rsc
CC=golang-dev
https://golang.org/cl/5606046
This patch adds a function to get the current cpu ticks. This is
deemed to be 'sufficiently random' to use to seed fastrand to mitigate
the algorithmic complexity attacks on the hash table implementation.
On AMD64 we use the RDTSC instruction. For 386, this instruction,
while valid, is not recognized by 8a so I've inserted the opcode by
hand. For ARM, this routine is currently stubbed to return a constant
0 value.
Future work: update 8a to recognize RDTSC.
Fixes#2630.
R=rsc
CC=golang-dev
https://golang.org/cl/5606048
- Unified bounary conditions for NFC and NFD and removed some indirections.
This enforces boundaries at the character level, which is typically what
the user expects. (NFD allows a boundary between 'a' and '`', for example,
which may give unexpected results for collation. The current implementation
is already stricter than the standard, so nothing much changes. This change
just formalizes it.
- Moved methods of qcflags to runeInfo.
- Swapped YesC and YesMaybe bits in qcFlags. This is to aid future changes.
- runeInfo return values use named fields in preperation for struct change.
- Replaced some left-over uint32s with rune.
R=r
CC=golang-dev
https://golang.org/cl/5607050
Without this change, fd3 can be collected by the garbage
collector and finalized, which causes the file descriptor to
be closed, which causes the call to os.Open to return 3 rather
than the expected descriptor number.
R=golang-dev, gri, bradfitz, bradfitz, iant
CC=golang-dev
https://golang.org/cl/5607056
The rule is that build directives can be preceded only
by blank lines and other line comments, not /* */ comments.
R=golang-dev, adg, bradfitz
CC=golang-dev
https://golang.org/cl/5619045
This is a minimal API extension, it makes it possible
to implement missing Int functionality externally w/o
compromising efficiency. It is the hope that this will
reduce the number of feature requests going directly
into the big package.
Also: Fixed some naming inconsistencies: The receiver
is only called z when it is also the result.
R=golang-dev, agl
CC=golang-dev
https://golang.org/cl/5607055
This will add the temporary object directory into the lookup
path so that cgo-exported function declarations may be
included from C files.
This was previously applied by CL 5600043, and apparently
removed by mistake on CL 5598045.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/5610054
This can happen on Plan 9 if we we're building
with the 32-bit and 64-bit host compilers, one
after the other.
R=rsc
CC=golang-dev
https://golang.org/cl/5599053
Plan 9's tr(1) doesn't accept the C-style escapes
for tab and newline characters. I was going to use
the \xFF hexadecimal escapes but GNU tr(1) doesn't
accept those. It seems octal is the least common
denominator.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/5576079
This can drastically reduce the number of system
calls made by programs that repeatedly query the
environment.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/5599054
Ignore result of setting SO_BROADCAST.
Disable TestSimpleListenMulticastUDP as
setIPv4MulticastInterface is not implemented.
R=golang-dev, bradfitz, mikioh.mikioh
CC=golang-dev
https://golang.org/cl/5610044
Print all the syntax errors. Fixes issue 2811.
Change Windows binary removal strategy.
This should keep the temporary files closer to
the binaries they are for, which will make it
more likely that the rename is not cross-device
and also make it easier to clean them up.
Fixes#2604 (as much as we can).
The standard build does not use the go command
to install the go command anymore, so issue 2604
is less of a concern than it originally was.
(It uses the go_bootstrap command to install
the go command.)
Buffer 'go list' output.
R=golang-dev, bradfitz, r
CC=golang-dev
https://golang.org/cl/5604048
Black box test is too time-consuming, as the bug
does not appear until Scan has processed 2 GB of
input in total across multiple calls, so no test.
Thanks to Frederick Mayle for the diagnosis and fix.
Fixes#2809.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/5611043
Both are unused and undocumented.
InvalidConnError is also non-idiomatic: a FooError type can
typically describe something, else it would be an ErrFoo
variable.
R=golang-dev, alex.brainman
CC=golang-dev
https://golang.org/cl/5609045
Do not treat $GOROOT/src/pkg, $GOROOT/src/cmd,
$GOPATH/src as package directories (only subdirectories
of those can be package directories). Fixes issue 2602.
Accept additional compiler and linker arguments during
cgo from $CGO_CFLAGS and $CGO_LDFLAGS, as the
Makefiles used to do.
Show failed pkg-config output. Fixes issue 2785.
Use different (perhaps better) git commands. Fixes issue 2109.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/5605045
The type being unavailable on Windows was the only API
signature difference in the net package.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/5608043
Print build errors to stderr during 'go run'.
Stream test output during 'go test' (no args). Fixes issue 2731.
Add go test -i to install test dependencies. Fixes issue 2685.
Fix data race in exitStatus. Fixes issue 2709.
Fix tool paths. Fixes issue 2817.
R=golang-dev, bradfitz, n13m3y3r, r
CC=golang-dev
https://golang.org/cl/5591045
The previous logic was mainly non-working. It only needs to
ensure that the go tool doesn't try to build the standard
library with gccgo.
R=golang-dev, rsc
CC=golang-dev, remy
https://golang.org/cl/5580051
- enable AllMethods flag (default: not set)
- fix logic determining which methods to show
- added respective test case in testdata/e.go for AllMethods = false
- added test case set for AllMethods = true
The critical changes/files to look at are:
- testdata/e{0,1,2}.golden: T4.M should only show up as method of T5 in e2.golden
- reader.go: always include top-level methods, and negate former logic for embedded methods
(rewrote as a switch for better comprehensability)
Fixes#2791.
R=rsc, rsc
CC=golang-dev
https://golang.org/cl/5576057
This fixes some test noise in TestStressSurpriseServerCloses when
ulimit -n something low, like 256 on a Mac.
Previously, when the server closed on us and we were expecting more
responses (like we are in that test), we'd read an "Unexpected EOF"
and just forget about the client's net.Conn. Now it's closed,
rather than waiting on the finalizer to release the fd.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/5602043
I missed an overflow in contract because I suspected that the prime
elimination would take care of it. It didn't, and I forgot to get back
to the overflow. Because of this, p224Contract may have produced a
non-minimal representation, causing flakey failures ~0.02% of the
time.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/5592045
This CL introduces new function ListenMulticastUDP to fix
multicast UDP listening across multiple listeners issue,
to replace old multicast methods JoinGroup and LeaveGroup
on UDPConn.
This CL also enables multicast testing by default.
Fixes#2730.
R=rsc, paul.a.lalonde, fullung, devon.odell
CC=golang-dev
https://golang.org/cl/5562048
We support SSLv3 as a server but not as a client (and we don't want to
support it as a client). This change fixes the error message when
connecting to an SSLv3 server since SSLv3 support on the server side
made mutualVersion accept SSLv3.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/5545073
5l -v is for benchmarking various parts of the loader, but this code in
obj.c will clutter the output. I only comment them out, because this is
on par with 8l/6l.
R=golang-dev
CC=golang-dev
https://golang.org/cl/5600046
A go build currently generates around 400MB of test output prior to
cleaning up. With this change we use a maximum of ~15MB.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/5588044
Ensure that file descriptors have not already been leaked into our
environment - close any that are open at the start of the
TestExtraFiles test.
Also use the appropriate command for listing open files.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/5574062
This patch adds a hash seed to the Hmap struct. Each seed is
initialized by runtime.fastrand1(). This is the first step of a
solution to issue 2630. Fastrand1 still needs to be updated to provide
us with actually random bits.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/5599046
The new cross-compiling bin target was breaking
everything but the system where buildscript.sh ran.
TBR=golang-dev
CC=golang-dev
https://golang.org/cl/5598055
Consequently, remove many package Makefiles,
and shorten the few that remain.
gomake becomes 'go tool make'.
Turn off test phases of run.bash that do not work,
flagged with $BROKEN. Future CLs will restore these,
but this seemed like a big enough CL already.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/5601057
Add 'go clean'.
Make 'go build' write to pkgname, not a.out.
Make 'go test -c' write to pkgname.test, not test.out.
Make 'go install' write alternate binaries to .../bin/goos_goarch/.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/5600048
We weren't properly deleting the various header
files (that were temporarily renamed) if a $CC
for the current $GOARCH didn't exist. And since
the compiler checks the current directory for
headers before any -I arguments, this had the
unfortunate side effect of including the last
generated headers instead of the correct ones.
R=r, rsc
CC=golang-dev
https://golang.org/cl/5581055
Also delete gotest, since it's messy to fix and slated for deletion anyway.
A couple of things outside src can't be tested any more. "go test" will be
fixed and these tests will be re-enabled. They're noisy for now.
Fixes#284.
R=rsc
CC=golang-dev
https://golang.org/cl/5598049
If set, all methods are shown, not just those
of non-exported anonynous fields.
This change will only become functional once
CL 5576057 is submitted.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/5599048
This fixes a regression that was made when adding
support for building with gccgo (in d6a14e6fac0c).
External commands (those not from the Go tree) were
being installed to the package directory instead of
the binary directory.
R=golang-dev, rsc, adg, remyoudompheng, rsc
CC=golang-dev
https://golang.org/cl/5564072
This will add the temporary object directory into the lookup
path so that cgo-exported function declarations may be
included from C files.
R=golang-dev, rogpeppe, rsc
CC=golang-dev
https://golang.org/cl/5600043
Cookies recieved in a response to a POST request are stored
in the client's jar like they are for GET requests.
R=golang-dev, rsc
CC=bradfitz, golang-dev
https://golang.org/cl/5576065
fix, vet
yacc is also fixed (it was wrong before)
All that's left is the commands used during compilation
This looks like a huge CL, but it's almost all file renames.
The action is in cmd/go/pkg.go, the Makefiles, and .../doc.go.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/5595044
If the argument to go fix isn't a package directory, the message said nothing helpful.
Now it at least says a package couldn't be found.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/5577072
1) create go-tool dir in make.bash
2) clean up stale binaries in make.bash
3) add 'tool' command to go
4) convert goyacc->yacc as a first test tool
Since goyacc stands alone, it's a safe trial.
R=rsc
CC=golang-dev
https://golang.org/cl/5576061
They're not portable, and pkg os is supposed to be portable.
Fixes#2562
R=golang-dev, mikioh.mikioh, r, n13m3y3r, rsc
CC=golang-dev
https://golang.org/cl/5574078
Added flag AllMethods: if not set (future default), embedded
methods of exported (and thus visible) embedded fields are not
shown in the final package documentation
The actual change for AllMethods is just in sortedFuncs. All
other changes are simplifications of the existing logic (mostly
deletion of code): Because method conflicts due to embedding
must always be detected, remove any premature elimination of
types and methods. Instead collect all named types and all
methods and do the filtering at the end.
Miscellaneous:
- renamed baseType -> namedType
- streamline logic for recording embedded types
- record embedded types via a map (simpler data structures)
AllMethods is set by default; so the output is unchanged and
the tests pass. The next CL will enable the AllMethods flag
and have adjusted tests (and fix issue 2791).
R=rsc
CC=golang-dev
https://golang.org/cl/5572076
The use of gccgo is triggered by GC=gccgo in environment. It
still needs the standard distribution to behave properly, but
allows using the test, build, run, install subcommands with
gccgo.
R=rsc, iant, fullung
CC=golang-dev, remy
https://golang.org/cl/5562045
+eliminates a possibility of sending a call to Done several times.
+fixes memory leak in case of temporal Write errors.
+fixes data race on Client.shutdown.
+fixes data race on Client.closing.
+fixes comments.
Fixes#2780.
R=r, rsc
CC=golang-dev, mpimenov
https://golang.org/cl/5571063
This solves the ambiguity for "lp.net/project/foo". In these URLs,
"foo" could be a series name registered in Launchpad with its own
branch, and it could also be the name of a directory within the
main project branch one level up.
Solve it by testing if the series branch exists in Launchpad
and if it doesn't moving the root one level up.
R=rsc
CC=golang-dev
https://golang.org/cl/5577058
The new url.URL's parsing can be too canonicalizing for
certain applications. By keeping the original request URI
around, we give applications a gross escape hatch while
keeping the URL package clean and simple for normal uses.
(From a discussion with Gary Burd, Gustavo Niemeyer,
and Russ Cox.)
Fixes#2782
R=golang-dev, rsc, dsymonds
CC=golang-dev
https://golang.org/cl/5580044
It means serious user error that can lead to
hard to debug issues under load, log entry
will not harm.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/5574075
The idea is that we add files to the api/ directory which
are sets of promises for the future. Each line in a file
is a stand-alone feature description.
When we do a release, we make sure we haven't broken or changed
any lines from the past (only added them).
We never change old files, only adding new ones. (go-1.1.txt,
etc)
R=dsymonds, adg, r, remyoudompheng, rsc
CC=golang-dev
https://golang.org/cl/5570051
Separating Method from Func made the code only more complicated
without adding much to the useability/readability of the API.
Reverted to where it was, but leaving the new method-specific
fields Orig and Level.
Former clients (godoc) of doc.Method only used the Func fields;
and because Func was embedded, no changes are needed with respect
to the removal of Method.
Changed type of Func.Recv from ast.Expr to string. This was a
long-standing TODO. Also implemented Func.Orig field (another TODO).
No further go/doc API changes are expected for Go 1.
R=rsc, r, r
CC=golang-dev
https://golang.org/cl/5577043
This improves the handling of xml.Unmarshal in
the xmlapi fix by guessing some of the common
types used on it.
This also fixes a bug in the partial typechecker.
In an expression such as f(&a), it'd mark a as
having &T rather than *T.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/5572058
Pulling function calls out to happen before the
expression being evaluated was causing illegal
reorderings even without inlining; with inlining
it got worse. This CL adds a separate ordering pass
to move things with a fixed order out of expressions
and into the statement sequence, where they will
not be reordered by walk.
Replaces lvd's CL 5534079.
Fixes#2740.
R=lvd
CC=golang-dev
https://golang.org/cl/5569062
Added a cache to compensate for extra call overhead.
go test -bench=Print marginally faster (in the noise).
R=r
CC=golang-dev
https://golang.org/cl/5574061
The implementation is divided into 4 phases:
1) export filtering of an incoming AST if necessary (exports.go)
2) reading of a possibly filtered AST (reader.go: type reader)
3) method set computation (reader.go)
4) sorting and creation of final documentation (reader.go)
In contrast to the old implementation, the presentation data
(Names, Docs, Decls, etc.) are created immediately upon reading
the respective AST node. Also, all types are collected (embedded
or not) in a uniform way.
Once the entire AST has been processed, all methods and types
have been collected and the method sets for each type can be
computed (phase 3).
To produce the final documentation, the method sets and value
maps are sorted.
There are no API changes. Passes the existing test suite unchanged.
R=rsc, rogpeppe
CC=golang-dev
https://golang.org/cl/5554044
Reimplement the test based on code from adg@golang.org.
The previous version has a race since the file is closed via defer
rather than in the go routine. This meant that the file could be
closed before the go routine has actually received io.EOF. It then
receives EBADF and continues to do zero-byte writes to the pipe.
This addresses an issue seen on FreeBSD and OpenBSD, where the test
passes but exits with a SIGPIPE, resulting in a failure.
R=golang-dev, adg
CC=golang-dev
https://golang.org/cl/5554083
Without this change it's possible to launch godoc,
immediately GET /, and see a directory listing instead of root.html
R=gri
CC=golang-dev
https://golang.org/cl/5575054
work in progress, and we are not ready to freeze its API for Go 1.
Package html still exists, containing just two functions: EscapeString
and UnescapeString.
Both the packages at exp/html and html are "package html". The former
is a superset of the latter.
At some point in the future, the exp/html code will move back into
html, once we have finalized the parser API.
R=rsc, dsymonds
CC=golang-dev
https://golang.org/cl/5571059
Marshaler has a number of open areas that need
further thought (e.g. it doesn't handle attributes,
it's supposed to handle tag names internally but has
no information to do so, etc).
We're removing it now and will bring it back with an
interface that covers these aspects, after Go 1.
Related to issue 2771, but doesn't fix it.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/5574057
In order to allow buildscript.sh to generate buildscripts for all
$GOOS/$GOARCH combinations, we have to generate dummy files for cmd/go.
Fixes#2586.
R=rsc, golang-dev
CC=golang-dev
https://golang.org/cl/5557050
Also, add an explicit error type when the right hand side is an unexported
function.
R=golang-dev, gri, rogpeppe, agl, rsc
CC=golang-dev
https://golang.org/cl/5564048
Includes gofix module. The only case not covered should be
xml.Unmarshal, since it remains with a similar interface, and
would require introspecting the type of its first argument
better.
Fixes#2626.
R=golang-dev, rsc, gustavo
CC=golang-dev
https://golang.org/cl/5574053
CL 5572043 removed the last uses of this field.
The information is readily available from Type.Decl.
R=rsc, golang-dev
CC=golang-dev
https://golang.org/cl/5570049
The bitLen function currently shifts out blocks of 8 bits at a time.
This change replaces this sorta-linear algorithm with a log(N)
one (shift out 16 bits, then 8, then 4, then 2, then 1).
I left the start of it linear at 16 bits at a time so that
the function continues to work with 32 or 64 bit values
without any funkiness.
The algorithm is similar to several of the nlz ("number of
leading zeros") algorithms from "Hacker's Delight" or the
"bit twiddling hacks" pages.
Doesn't make a big difference to the existing benchmarks, but
I'm using the code in a different context that calls bitLen
much more often, so it seemed worthwhile making the existing
codebase faster so that it's a better building block.
Microbenchmark results on a 64-bit Macbook Pro using 6g from weekly.2012-01-20:
benchmark old ns/op new ns/op delta
big.BenchmarkBitLen0 4 6 +50.12%
big.BenchmarkBitLen1 4 6 +33.91%
big.BenchmarkBitLen2 6 6 +3.05%
big.BenchmarkBitLen3 7 6 -19.05%
big.BenchmarkBitLen4 9 6 -30.19%
big.BenchmarkBitLen5 11 6 -42.23%
big.BenchmarkBitLen8 16 6 -61.78%
big.BenchmarkBitLen9 5 6 +18.29%
big.BenchmarkBitLen16 18 7 -60.99%
big.BenchmarkBitLen17 7 6 -4.64%
big.BenchmarkBitLen31 19 7 -62.49%
On an ARM machine (with the previous weekly):
benchmark old ns/op new ns/op delta
big.BenchmarkBitLen0 37 50 +36.56%
big.BenchmarkBitLen1 59 51 -13.69%
big.BenchmarkBitLen2 74 59 -20.40%
big.BenchmarkBitLen3 92 60 -34.89%
big.BenchmarkBitLen4 110 59 -46.09%
big.BenchmarkBitLen5 127 60 -52.68%
big.BenchmarkBitLen8 181 59 -67.24%
big.BenchmarkBitLen9 78 60 -23.05%
big.BenchmarkBitLen16 199 69 -65.13%
big.BenchmarkBitLen17 91 70 -23.17%
big.BenchmarkBitLen31 210 95 -54.43%
R=golang-dev, dave, edsrzf, gri
CC=golang-dev
https://golang.org/cl/5570044
Move error information into Package struct, so that
a package can be returned even if a dependency failed
to load or did not exist. This makes it possible to run
'go fix' or 'go fmt' on packages with broken dependencies
or missing imports. It also enables go get -fix.
The new go list -e flag lets go list process those package
errors as normal data.
Change p.Doc to be first sentence of package doc, not
entire package doc. Makes go list -json or
go list -f '{{.ImportPath}} {{.Doc}}' much more reasonable.
The go tool now depends on http, which means also
net and crypto/tls, both of which use cgo. Trying to
make the build scripts that build the go tool understand
and handle cgo is too much work. Instead, we build
a stripped down version of the go tool, compiled as go_bootstrap,
that substitutes an error stub for the usual HTTP code.
The buildscript builds go_bootstrap, go_bootstrap builds
the standard packages and commands, including the full
including-HTTP-support go tool, and then go_bootstrap
gets deleted.
Also handle the case where the buildscript needs updating
during all.bash: if it fails but a go command can be found on
the current $PATH, try to regenerate it. This gracefully
handles situations like adding a new file to a package
used by the go tool.
R=r, adg
CC=golang-dev
https://golang.org/cl/5553059
This lets the client of go/build specify additional tags that
can be recognized in a // +build directive. For example,
a build for a custom environment like App Engine might
include "appengine" in the BuildTags list, so that packages
can be written with some files saying
// +build appengine (build only on app engine)
or
// +build !appengine (build only when NOT on app engine)
App Engine here is just a hypothetical context. I plan to use
this in the cmd/go sources to distinguish the bootstrap version
of cmd/go (which will not use networking) from the full version
using a custom tag. It might also be useful in App Engine.
Also, delete Build and Script, which we did not end up using for
cmd/go and which never got turned on for real in goinstall.
R=r, adg
CC=golang-dev
https://golang.org/cl/5554079
Golden files have extension .d.golden where d is the mode value (0 or 1 for now)
(i.e., testdata/file.out is now testdata/file.0.golden, and there is a new file
testdata/file.1.golden for each testcase)
R=rsc
CC=golang-dev
https://golang.org/cl/5573046
Marshalling of []byte in attributes and the general
marshalling of named []byte types was fixed.
A []byte field also won't be nil if an XML element
was mapped to it, even if the element is empty.
Tests were introduced to make sure that *struct{}
fields works correctly for element presence testing.
No changes to the logic made in that regard.
R=rsc
CC=golang-dev
https://golang.org/cl/5539070
It was 2^31, but that could cause overflow and trouble.
Reduce it to 2^30 and add a TODO.
R=golang-dev, iant
CC=golang-dev
https://golang.org/cl/5562049
It takes too much memory to be reliable and causes
trouble on 32-bit machines.
Sigh.
Fixes#2756.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/5567043
Make the panic detectable, and use that in ioutil.ReadFile to
give an error if the file is too big.
R=golang-dev, minux.ma, bradfitz
CC=golang-dev
https://golang.org/cl/5563045
This fixes the bug Rob ran into when editing package bytes.
Regexp imports regexp/syntax, which imports bytes, and
regexp/syntax was not being properly recompiled during a
test of a change to package bytes.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/5555065
Preserve test.
changeset: 11593:f1deaf35e1d1
user: Luuk van Dijk <lvd@golang.org>
date: Tue Jan 17 10:00:57 2012 +0100
summary: gc: fix infinite recursion for embedded interfaces
This is causing 'interface type loop' errors during compilation
of a complex program. I don't understand what's happening
well enough to boil it down to a simple test case, but undoing
this change fixes the problem.
The change being undone is fixing a corner case (uses of
pointer to interface in an interface definition) that basically
only comes up in erroneous Go programs. Let's not try to
fix this again until after Go 1.
Unfixes issue 1909.
TBR=lvd
CC=golang-dev
https://golang.org/cl/5555063
We already use GOHOSTOS to represent the host OS that the toolchain
will be run on, so no need to resort to uname(1) to get that (and
use uname(1) will make cross-compiling for another host impossible).
R=rsc, golang-dev
CC=golang-dev
https://golang.org/cl/5530050
- use proper Win64 gcc calling convention when
calling initcgo on amd64
- increase g0 stack size to 64K on amd64 to make
it the same as 386
- implement C.sleep
- do not use C.stat, since it is renamed to C._stat by mingw
- use fopen to implement TestErrno, since C.strtol
always succeeds on windows
- skip TestSetEnv on windows, because os.Setenv
sets windows process environment, while C.getenv
inspects internal C runtime variable instead
R=golang-dev, vcc.163, rsc
CC=golang-dev
https://golang.org/cl/5500094
instead of the origin.
This makes YCbCr match the other image types (e.g. RGBA, Gray) in
that an image's bounds is not restricted to the positive quadrant.
Also optimize the YCbCr draw code by hoisting some computation
outside of the loop.
benchmark old ns/op new ns/op delta
draw.BenchmarkYCbCr 2544418 2373558 -6.72%
Like https://golang.org/cl/4681044/ I don't think a gofix is
feasible. People will have to make manual changes. On the other hand,
directly manipulating YCbCr images is relatively rare, compared to
RGBA images, and if other code just uses the jpeg and draw packages
instead of messing directly with a YCbCr's []byte representations,
then things should just continue to work.
R=r
CC=golang-dev
https://golang.org/cl/5558048
Remove NewMD5, NewSHA1 and NewSHA256 in favor of using New and
explicitly importing the used hash-function. This way when using, for
example, HMAC with RIPEMD there's no md5, sha1 and sha256 linked in
through the hmac package.
A gofix rule is included, and applied to the standard library (3 files
altered).
This change is the result of a discussion at
https://golang.org/cl/5550043/ to pull the discussion about
deprecating these functions out of that issue.
R=golang-dev, agl
CC=golang-dev, r, rsc
https://golang.org/cl/5556058
Fix originally from rogpeppe in 5414048 but was rolled
back due to test breakage.
This CL makes the test more robust to order of operations.
Fixes#2480 again.
R=golang-dev, gri
CC=golang-dev
https://golang.org/cl/5536072
The previous version of all the node.String methods printed the parse
tree and was useful for developing the parse tree code. Now that that's done,
we might as well print the nodes using the standard template syntax.
It's much easier to read and makes error reporting look more natural.
Helps issue 2644.
R=rsc, n13m3y3r
CC=golang-dev
https://golang.org/cl/5553066
So as to give out stack trace for panic in examples.
This behavior also matches the tests'.
Fixes#2691.
R=golang-dev
CC=golang-dev
https://golang.org/cl/5554061
(Sending to r because of the API change.)
Over time we might want to add support for other key types.
While I was in the code, I also made the use of RawSubject the same
between Subject and Issuer when creating certificates.
R=r, rsc
CC=golang-dev
https://golang.org/cl/5554049
(Sending to r because of the API change.)
This change alters the API for crypto/elliptic to permit different
implementations in the future. This will allow us to add faster,
constant-time implementations of the standard curves without any more
API changes.
As a demonstration, it also adds a constant-time implementation of
P224. Since it's only 32-bit, it's actually only about 40% the speed
of the generic code on a 64-bit system.
R=r, rsc
CC=golang-dev
https://golang.org/cl/5528088
TestNonStandardNormalValues runs 1.5s,
the change reduces it to 0.2s in short mode.
The problem is with slow machines, emulators and dynamic tools.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/5540065
Also, disable server-side generation of TOC for commands as they would
only ever show Overview. The JS does a better job (for now).
Fixes#2732.
R=gri, dsymonds
CC=golang-dev
https://golang.org/cl/5558046
It works with NewTicker too, but is potentially a bit less efficient,
and reads wrong.
This is what happens when you TBR Windows changes, I guess.
R=golang-dev, gri, iant
CC=golang-dev
https://golang.org/cl/5536060
This allows HTML pages to specify arbitrary data in a header:
<!--{
"Title": "The page title",
...
}-->
replacing the old style comments:
<!-- title The page title -->
R=gri, rsc, r, bradfitz, dsymonds
CC=golang-dev
https://golang.org/cl/5532093
Previously, a timeout (in int64 nanoseconds) applied to a granularity
even smaller than one operation: a 100 byte read with a 1 second timeout
could take 100 seconds, if the bytes all arrived on the network 1 second
apart. This was confusing.
Rather than making the timeout granularity be per-Read/Write,
this CL makes callers set an absolute deadline (in time.Time)
after which operations will fail. This makes it possible to
set deadlines at higher levels, without knowing exactly how
many read/write operations will happen in e.g. reading an HTTP
request.
Fixes#2723
R=r, rsc, dave
CC=golang-dev
https://golang.org/cl/5555048
This matches the other color models. It seems that this was missed
during the review of 5544073.
R=nigeltao, david.crawshaw
CC=golang-dev
https://golang.org/cl/5536057
Packages to test are kept in ./testdata together
with the corresponding golden (packagename.out)
file.
To update the golden files, run: go test -update
R=rsc
CC=golang-dev
https://golang.org/cl/5543054
- Use a faster closure-based iterator rather than a channel-based one.
- Otherwise: better code organization, but no other API changes.
R=r, r
CC=golang-dev
https://golang.org/cl/5557051
First was, apart from adding tests, a single line of code (to add the
constructor function). Adding SHA512-based hashing to crypto/hmac
required minor rework of the package because of a previously hardcoded
block-size in it's implementation. Instead of using a hash.Hash
generator function the constructor function now uses a crypto.Hash
type, which was extended to expose information about block size.
The only standard library package impacted by the change is
crypto/tls, for which the fix is included in this patch. It might be
useful to extend gofix to include this API change too.
R=agl, r, rsc, r
CC=golang-dev
https://golang.org/cl/5550043
We need to avoid allocating an extra word for the interface value
passing the floating-point value as an interface{}. It's easy.
Fixes#2722.
R=golang-dev, gri
CC=golang-dev
https://golang.org/cl/5553044
The package documentation did not mention them.
They were described only in godoc for gotest, and that's going away.
R=golang-dev, rsc, adg
CC=golang-dev
https://golang.org/cl/5539079
go test runs the tests itself; it does not run the gotest command,
so these mentions are confusing.
R=golang-dev, n13m3y3r
CC=golang-dev
https://golang.org/cl/5551043
On 32-bit machines, %g takes an extra malloc. I don't know why yet,
but this makes the test pass again, and enables it even for -short.
Fixes#2653.
R=golang-dev, bradfitz, r
CC=golang-dev
https://golang.org/cl/5542055
Duplicated fields from URL were dropped so that its behavior
is simple and expected when being stringified and when being
operated by packages like http. Most of the preserved fields
are in unencoded form, except for RawQuery which continues to
exist and be more easily handled via url.Query().
The RawUserinfo field was also replaced since it wasn't practical
to use and had limitations when operating with empty usernames
and passwords which are allowed by the RFC. In its place the
Userinfo type was introduced and made accessible through the
url.User and url.UserPassword functions.
What was previous built as:
url.URL{RawUserinfo: url.EncodeUserinfo("user", ""), ...}
Is now built as:
url.URL{User: url.User("user"), ...}
R=rsc, bradfitz, gustavo
CC=golang-dev
https://golang.org/cl/5498076
The terminal code in exp/terminal was forked from the code in exp/ssh.
This change removes the duplicated code from exp/ssh in favour of
using exp/terminal.
R=rsc
CC=golang-dev
https://golang.org/cl/5375064
This CL revises existing platform-dependent default socket
options to make it possible to accomodate multiple multicast
datagram listeners on a single service port.
Also removes unnecessary SO_REUSEADDR, SO_REUSEPORT socket
options from unicast datagram sockets by default.
Fixes#1692.
R=devon.odell, alex.brainman, rsc
CC=golang-dev
https://golang.org/cl/5538052
(This was missing in the last change because I uploaded it from the
wrong machine.)
Large pastes previously misbehaved because the code tried reading from
the terminal before checking whether an line was already buffered.
Large pastes can cause multiples lines to be read at once from the
terminal.
R=bradfitz
CC=golang-dev
https://golang.org/cl/5542049
exp/proxy provides client support for tunneling connections through
various proxies.
This is an initial, incomplete sketch of the code to lay down an
API.
R=golang-dev, r, r, bradfitz, rsc
CC=golang-dev
https://golang.org/cl/5490062
Also verified in external test suite that this fixes MySQL
resource exhaustion problems, and also exposed a double-free
bug in the gosqlite3 driver (where gosqlite3 either got lucky
before, or was working around this bug)
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/5544057
The implementation is similar to the one from the double-conversion
library used in the Chrome V8 engine.
old ns/op new ns/op speedup
BenchmarkAppendFloatDecimal 591 480 1.2x
BenchmarkAppendFloat 2956 486 6.1x
BenchmarkAppendFloatExp 10622 503 21.1x
BenchmarkAppendFloatNegExp 40343 483 83.5x
BenchmarkAppendFloatBig 2798 664 4.2x
See F. Loitsch, ``Printing Floating-Point Numbers Quickly and
Accurately with Integers'', Proceedings of the ACM, 2010.
R=rsc
CC=golang-dev, remy
https://golang.org/cl/5502079
Merge package files in the go/ast MergePackageFiles
function always in the same order (sorted by filename)
instead of map iteration order to obtain the same
package file each time. This functionality is used
by godoc when displaying packages in ?m=src mode.
Also: minor cleanup in godoc.go.
R=rsc
CC=golang-dev
https://golang.org/cl/5540054
This CL improves the xml package in the following ways:
- makes its interface match established conventions
- brings Marshal and Unmarshal closer together
- fixes a large number of bugs and adds tests
- improves speed significantly
- organizes and simplifies the code
Fixes#2426.
Fixes#2406.
Fixes#1989.
What follows is a detailed list of those changes.
- All matching is case sensitive without special processing
to the field name or xml tag in an attempt to match them.
Customize the field tag as desired to match the correct XML
elements.
- Flags are ",flag" rather than "flag". The names "attr",
"chardata", etc, may be used to name actual XML elements.
- Overriding of attribute names is possible with "name,attr".
- Attribute fields are marshalled properly if they have
non-string types. Previously they were unmarshalled, but were
ignored at marshalling time.
- Comment fields tagged with ",comment" are marshalled properly,
rather than being marshalled as normal fields.
- The handling of the Any field has been replaced by the ",any"
flag to avoid unexpected results when using the field name for
other purposes, and has also been fixed to interact properly
with name paths. Previously the feature would not function
if any field in the type had a name path in its tag.
- Embedded struct support fixed and cleaned so it works when
marshalling and also when using field paths deeper than one level.
- Conflict reporting on field names have been expanded to cover
all fields. Previously it'd catch only conflicts of paths
deeper than one level. Also interacts correctly with embedded
structs now.
- A trailing '>' is disallowed in xml tags. It used to be
supported for removing the ambiguity between "attr" and "attr>",
but the marshalling support for that was broken, and it's now
unnecessary. Use "name" instead of "name>".
- Fixed docs to point out that a XMLName doesn't have to be
an xml.Name (e.g. a struct{} is a good fit too). The code was
already working like that.
- Fixed asymmetry in the precedence of XML element names between
marshalling and unmarshalling. Marshal would consider the XMLName
of the field type before the field tag, while unmarshalling would
do the opposite. Now both respect the tag of the XMLName field
first, and a nice error message is provided in case an attempt
is made to name a field with its tag in a way that would
conflict with the underlying type's XMLName field.
- Do not marshal broken "<???>" tags when in doubt. Use the type
name, and error out if that's not possible.
- Do not break down unmarshalling if there's an interface{} field
in a struct.
- Significant speed boost due to caching of type metadata and
overall allocation clean ups. The following timings reflect
processing of the the atom test data:
Old:
BenchmarkMarshal 50000 48798 ns/op
BenchmarkUnmarshal 5000 357174 ns/op
New:
BenchmarkMarshal 100000 19799 ns/op
BenchmarkUnmarshal 10000 128525 ns/op
R=cw, gustavo, kevlar, adg, rogpeppe, fullung, christoph, rsc
CC=golang-dev
https://golang.org/cl/5503078
- the main changes are removing the Doc suffix
from the exported types, so instead of
doc.TypeDoc one will have doc.Type, etc.
- All exported types now have a Name (or Names) field.
For Values, the Names field lists all declared variables
or constants.
- Methods have additional information about where they are
coming from.
- There's a mode field instead of a bool to
control the package's operation, which makes
it easier to extend w/o API changes.
Except for the partially implemented new Method type,
this is based on existing code. A clean rewrite is in
progress based on this new API.
R=rsc, kevlar
CC=golang-dev
https://golang.org/cl/5528060
Only ParseFile, ParseDir, and ParseExpr are used in the tree.
If partial parsing of code is required, it is fairly simple
to wrap the relevant piece of code into a dummy package for
parsing (see parser.ParseExpr).
Also: minor cleanups.
R=rsc
CC=golang-dev
https://golang.org/cl/5535055
These functions are mostly of interest for debugging; the
number of bytes written is uninteresting.
R=r, bradfitz
CC=golang-dev
https://golang.org/cl/5540046
By the time a Unix linker gets to the end of the
command line it has forgotten what you told it
at the beginning of the command line, so you
have to put library arguments (like -lm) at the end.
R=golang-dev, r, bradfitz
CC=golang-dev
https://golang.org/cl/5541043
In a test that does
func TestFoo(t *testing.T) {
defer cleanup()
t.Fatal("oops")
}
it can be important that cleanup run as the test fails.
The old code did this in Fatal:
t.signal <- t
runtime.Goexit()
The runtime.Goexit would run the deferred cleanup
but the send on t.signal would cause the main test loop
to move on and possibly even exit the program before
the runtime.Goexit got a chance to run.
This CL changes tRunner (the top stack frame of a test
goroutine) to send on t.signal as part of a function
deferred by the top stack frame. This delays the send
on t.signal until after runtime.Goexit has run functions
deferred by the test itself.
For the above TestFoo, this CL guarantees that cleanup
will run before the test binary exits.
This is particularly important when cleanup is doing
externally visible work, like removing temporary files
or unmounting file systems.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/5532078
Especially affects tests, but not test-specific.
The linker was only being told where to find the
direct dependencies of package main. Sometimes that
was sufficient to find the rest; sometimes not.
Fixes#2657.
Fixes#2666.
Fixes#2680.
R=golang-dev, adg, rogpeppe
CC=golang-dev
https://golang.org/cl/5528079
This breakage is mainly due to API changes in pkg.
(e.g., package utf8 moved to unicode/utf8;
remove of strconv.Atof64;
change character type from int to rune.)
Also correct the usage comment.
This fixes issue 2646.
PS: I don't change the goyacc.go, because I think token type
should not be force to rune.
R=golang-dev, adg, rogpeppe, r, r
CC=golang-dev
https://golang.org/cl/5502093
The escape analysis code does not make a distinction between
scalar and pointers fields in structs. Non-pointer fields
that escape should not make the whole struct escape.
R=lvd, rsc
CC=golang-dev, remy
https://golang.org/cl/5489128
Tighter octal parsing broke some tests and were disabled in
https://golang.org/cl/5530051
Those tests were broken. The CSS decoder was supposed to see CSS
hex escape sequences of the form '\' <hex>+, but those escape
sequences were instead being consumed by the template parser.
This change properly escapes those escape sequences, and uses
proper escaping for NULs.
R=golang-dev, rsc, nigeltao
CC=golang-dev
https://golang.org/cl/5529073
- Changed the Scan API semantics slightly:
The token literal string is only returned
if the token is a literal, comment, semicolon,
or illegal character. In all other cases, the
token literal value is determined by the token
value.
Clients that care about the token literal value
when not present can always use the following
piece of code:
pos, tok, lit := scanner.Scan()
if lit == "" {
lit = tok.String()
}
- Changed token.Lookup API to use a string instead
of a []byte argument.
- Both these changes were long-standing TODOs.
- Added BenchmarkScan.
This change permits a faster implementation of Scan
with much fewer string creations:
benchmark old ns/op new ns/op delta
scanner.BenchmarkScan 74404 61457 -17.40%
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/5532076
This is a relic from the times when we switched
to automatic semicolon insertion. It's still use-
ful to have a non-exported switch for testing.
R=golang-dev, r, rsc
CC=golang-dev
https://golang.org/cl/5528077
1) Include Szabolcs Nagy's patch which adds serialisation for more
signature subpackets.
2) Include Szabolcs Nagy's patch which adds functions for making DSA
keys.
3) Make the random io.Reader an argument to the low-level signature
functions rather than having them use crypto/rand.
4) Rename crypto/openpgp/error to crypto/openpgp/errors so that it
doesn't clash with the new error type.
R=bradfitz, r
CC=golang-dev
https://golang.org/cl/5528044
Will have to do better but this is enough to
stop the builders from hanging, I hope.
R=golang-dev, dsymonds, adg
CC=golang-dev
https://golang.org/cl/5533066
pkg/runtime/sys_darwin_amd64.s: fixes syscall select nr
pkg/runtime/sys_linux_arm.s: uses newselect instead of the now unimplemented
(old) select, also fixes the wrong div/mod statements in runtime.usleep.
Fixes#2633
R=golang-dev, dave, rsc
CC=golang-dev
https://golang.org/cl/5504096
What package image currently provides is a larger image consisting
of many copies of a smaller image.
More generally, a tiled image could be a quilt consisting of different
smaller images (like Google Maps), or a technique to view a portion of
enormous images without requiring the whole thing in memory.
This richer construct might not ever belong in the standard library (and
is definitely out of scope for Go 1), but I would like the option for
image.Tiled to be its name.
R=r, rsc
CC=golang-dev
https://golang.org/cl/5530062
flag -l means: inlining on, -ll inline with early typecheck
-l lazily typechecks imports on use and re-export, nicer for debugging
-lm produces output suitable for errchk tests, repeated -mm... increases inl.c's verbosity
export processed constants, instead of originals
outparams get ->inlvar too, and initialized to zero
fix shared rlist bug, that lead to typecheck messing up the patched tree
properly handle non-method calls to methods T.meth(t, a...)
removed embryonic code to handle closures in inlined bodies
also inline calls inside closures (todo: move from phase 6b to 4)
Fixes#2579.
R=rsc
CC=golang-dev
https://golang.org/cl/5489106
This fixes issue 2444.
A big cleanup of all 31/32bit size boundaries i'll leave for another cl though. (see also issue 1700).
R=rsc
CC=golang-dev
https://golang.org/cl/5484058
On my MacBookAir4,1:
19.94r go install -a -p 1 std
12.36r go install -a -p 2 std
9.76r go install -a -p 3 std
10.77r go install -a -p 4 std
86.57r go test -p 1 std -short
52.69r go test -p 2 std -short
43.75r go test -p 3 std -short
40.44r go test -p 4 std -short
157.50r go test -p 1 std
99.58r go test -p 2 std
87.24r go test -p 3 std
80.18r go test -p 4 std
R=golang-dev, adg, r
CC=golang-dev
https://golang.org/cl/5531057
is consistent with what the Go compiler returns when such sequences
appear in string literals.
Fixes#2658.
R=golang-dev, rsc, r, r, nigeltao
CC=golang-dev
https://golang.org/cl/5530051
The -v flag prints the names of packages as they are built/installed.
Use -v in make.bash/run.bash to avoid a silent pause during
the build while Go code is being compiled.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/5532055
- separated exported data structures from doc reader
by extracting all exported data structures into doc.go
and moving the implementation into reader.go
- added missing documentation comments
- no API or semantic changes (but moved positions of
PackageDoc.Doc and TypeDoc.Decl field up for consistency)
- runs all tests
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/5527063
shorten the MathML namespace abbreviation from "mathml" to "math".
Python's html5lib uses "mathml", but I think that that is an internal
implementation detail; the test cases use "math".
Pass tests10.dat, test 30:
<div><svg><path><foreignObject><math></div>a
| <html>
| <head>
| <body>
| <div>
| <svg svg>
| <svg path>
| <svg foreignObject>
| <math math>
| "a"
R=andybalholm
CC=golang-dev
https://golang.org/cl/5529044
This fixes the most annoying bug in the go command,
that 'go build' sometimes ignored packages it had just
rebuilt in favor of stale installed ones.
This part of the code needs more thought, but this small
change is an important improvement.
R=golang-dev, adg
CC=golang-dev
https://golang.org/cl/5531053
I didn't believe that OpenPGP allowed > SHA-1 with DSA, but it does and
so we need to perform hash truncation.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/5510044
The recover code assumes that the panic() argument was
an error, but it is usually a simple string.
Fixes#2663.
R=golang-dev, r, r, gri
CC=golang-dev, remy
https://golang.org/cl/5527046
If there's a error compiling a _test.go file, the error
message tries to print a *Package with %s. There's no String
method on *Package, so the error message looks bad.
Since the error messages identify the file in question
anyway, this CL removes the package from the error message.
R=rsc, gri
CC=golang-dev
https://golang.org/cl/5520045
Fix incorrect marshal/unmarshal of certificateRequest.
Add support for configuring client-auth on the server side.
Fix the certificate selection in the client side.
Update generate_cert.go to new time package
Fixes#2521.
R=krautz, agl, bradfitz
CC=golang-dev, mikkel
https://golang.org/cl/5448093
This CL fixes two issues sending data to the remote peer.
The first bug occurs when the size of the buffer passed to
Write is larger than the current window, in this case, w.rwin
can become negative.
The second issue is more problematic than the first as the
amount of data passed to writePacket was not limited to w.rwin.
In this case the remote peer could silently drop the additional
data, or drop the connection.
Credit to Jacek Masiulaniec for the bug report.
R=agl, jacek.masiulaniec
CC=golang-dev
https://golang.org/cl/5511043
transport.go:
* remove unused nil check.
doc.go:
* improve documentation about supported auth
methods and update Run example.
Thanks Jacek Masiulaniec for both reports.
R=jacek.masiulaniec, agl
CC=golang-dev
https://golang.org/cl/5501075
1) incorrect length given for out buffer in String.
2) patchTail bug that could cause characters to be lost
when crossing into the out-buffer boundary.
Added tests to expose these bugs. Also slightly improved
performance of Bytes() and String() by sharing the reorderBuffer
across operations.
Fixes#2567.
R=r
CC=golang-dev
https://golang.org/cl/5502069
This works in the expected way: flag.Duration returns a *time.Duration,
and uses time.ParseDuration for parsing the input.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/5489113
1. Show passing output for "go test" (no args) and with -v flag.
2. Warn about out-of-date packages being rebuilt.
R=golang-dev, adg
CC=golang-dev
https://golang.org/cl/5504080
- exports.go contains a stripped-down (but semantically unchanged)
version of the code in go/ast/filter.go for export filtering
- filter.go contains the documentation filtering code found before
at the end of doc.go; this is simply a code move w/o any semantic
changes
- godoc now relies on go/doc for export filtering when creating
documentation. It still has a separate form of export filtering
for showing the source code version. This needs to be consolidated
(perhaps the source form view should just be removed?).
- Stripping of function bodies (stripFunctionBodies function of
godoc.go) is now happening in doc.go (line 176).
- doc.NewPackageDoc has an extra parameter "exportsOnly. If set
to false, the behavior is as before. This function is only called
once in our source code; a gofix module is probably not warranted.
- Deleted doc.NewFileDoc - was never called.
This change is mostly a code move w/ some minimal tweaks. It should
not cause any changes to the behavior of godoc. It's a prerequisite
for extracting anonymous embedded fields.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/5502072
A test intended for denormals erroneously returned true also for
infinities, leading to bad overflows and wrong error estimates.
R=rsc
CC=golang-dev, remy
https://golang.org/cl/5489091
Missing: Handling of embedded interfaces.
Also, for reasons outlined in the previous CL (5500055), embedded
types have to be exported for its "inherited" methods to be visible.
This will be addressed w/ a subsequent CL.
R=r, rsc
CC=golang-dev
https://golang.org/cl/5502059
1) Add EscapeCodes to the terminal so that applications don't wire
them in.
2) Add a callback for auto-complete
3) Fix an issue with input lines longer than the width of the
terminal.
4) Have Write() not stomp the current line. It now erases the current
input, writes the output and reprints the prompt and partial input.
5) Support prompting without local echo in Terminal.
6) Add GetSize to report the size of terminal.
R=bradfitz
CC=golang-dev
https://golang.org/cl/5479043
* work around a linker/cgo bug
* do not run deps.bash on Windows unless we need it
(cuts a full minute off the build time)
* add windows to the list of cgo-enabled targets
The gopack problem is issue 2601.
R=golang-dev, r, bradfitz
CC=golang-dev
https://golang.org/cl/5504062
No visible external changes yet. The current approach is
a stop-gap approach: For methods of anonymous fields to be
seen, the anonymous field's types must be exported.
Missing: computing the actual MethodDocs and displaying them.
(Depending on the operation mode of godoc, the input to go/doc
is a pre-filtered AST with all non-exported nodes removed. Non-
exported anonymous fields are not even seen by go/doc in this
case, and it is impossible to collect associated (even exported)
methods. A correct fix will require some more significant re-
engineering; AST filtering will have to happen later, possibly
inside go/doc.)
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/5500055
This lets us mark net's cgo_stub.go as only to be
built when cgo is disabled.
R=golang-dev, ality, mikioh.mikioh
CC=golang-dev
https://golang.org/cl/5489100
* correct dependency calculations
* comment meaning of action fields
* new alias "std" like "all" but standard packages only
* add -o flag to 'go build'
* set up for parallel build (still serial)
* understand that import "C" depends on cgo, runtime/cgo
R=golang-dev, mikioh.mikioh
CC=golang-dev
https://golang.org/cl/5502055
This CL makes both InterfaceAddrs and Addrs method on Interface
return IPNet struct for representing interface address and mask
like below:
interface "lo0": flags "up|loopback|multicast", ifindex 1, mtu 16384
interface address "fe80::1/64"
interface address "127.0.0.1/8"
interface address "::1/128"
joined group address "ff02::fb"
joined group address "224.0.0.251"
joined group address "ff02::2:65d0:d71e"
joined group address "224.0.0.1"
joined group address "ff01::1"
joined group address "ff02::1"
joined group address "ff02::1:ff00:1"
Fixes#2571.
R=rsc
CC=golang-dev
https://golang.org/cl/5489062
OS X 10.6 doesn't do O_CLOEXEC.
OS X 10.7 does.
For now, always fall back to using syscall.CloseOnExec on darwin.
This can removed when 10.6 is old news, or if we find a
way to cheaply & reliably detect 10.6 vs 10.7 at runtime.
Fixes#2587
R=golang-dev, rsc, iant
CC=golang-dev
https://golang.org/cl/5500053
Also recognize that, in the latest version of the HTML5 spec,
foreign content is not an insertion mode, but a separate concern.
Pass tests10.dat, test 13:
<!DOCTYPE html><body><table><caption><svg><g>foo</g><g>bar</g><p>baz</table><p>quux
| <!DOCTYPE html>
| <html>
| <head>
| <body>
| <table>
| <caption>
| <svg svg>
| <svg g>
| "foo"
| <svg g>
| "bar"
| <p>
| "baz"
| <p>
| "quux"
Also pass tests through test 15:
<!DOCTYPE html><body><table><colgroup><svg><g>foo</g><g>bar</g><p>baz</table><p>quux
R=andybalholm
CC=golang-dev
https://golang.org/cl/5494078
If something goes wrong, it should suffice to set
USE_GO_TOOL=false in env.bash to fall back to the
makefiles. I will delete the makefiles in January.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/5502047
The commands in the standard tree are now named
by the pseudo-import paths cmd/gofmt etc.
This avoids ambiguity between cmd/go's directory
and go/token's parent directory.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/5503050
The functions we generate to implement == on structs
or arrays may need to refer to unsafe.Pointer even in
safe mode, in order to handle unexported fields contained
in other packages' structs.
R=ken2
CC=golang-dev
https://golang.org/cl/5505046
New("x").ParseFiles("y") can result in an empty "x" template.
Make the message clearer that this is the problem. The error
returns from both template packages in this case were
confusing.
I considered making the method use "x" instead of "y" in
this case, but that just made other situations confusing
and harder to explain.
Fixes#2594.
R=golang-dev, rsc, r
CC=golang-dev
https://golang.org/cl/5498048
Also rename -v to -x in the build and install commands,
to match the flag in go test (which we can't change
because -v is taken). Matches sh -x anyway.
R=r, iant, ality
CC=golang-dev
https://golang.org/cl/5504045
The ast.Object's Decl field pointed back to the corresponding declaration for
all but short variable declarations. Now remember corresponding assignment
statement in the Decl field.
Also: simplified some code for parsing select statements.
R=golang-dev, r, bradfitz
CC=golang-dev
https://golang.org/cl/5492072
Refactors the benchmarks and test code.
Now benchmarks can call Errorf, Fail, etc.,
and the runner will act accordingly.
Because functionality has been folded into an
embedded type, a number of methods' docs
no longer appear in godoc output. A fix is
underway; if it doesn't happen fast enough,
I'll add wrapper methods to restore the
documentation.
R=bradfitz, adg, rsc
CC=golang-dev
https://golang.org/cl/5492060
This change doesn't pay attention to structs
so they still cannot be exported, see Issue 2552.
Fixes#2462.
R=dvyukov, rsc, iant
CC=golang-dev
https://golang.org/cl/5487058
Also add a byte count to the varint benchmarks - this
isn't accurate, of course, but it allows a rough comparison to
the other benchmarks.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/5496070
The algorithm is the same as in the double-conversion library
which also implements Florian Loitsch's fast printing algorithm.
It uses extended floats with a 64-bit mantissa, but cannot give
an answer for all cases.
old ns/op new ns/op speedup
BenchmarkAtof64Decimal 332 322 1.0x
BenchmarkAtof64Float 385 373 1.0x
BenchmarkAtof64FloatExp 9777 419 23.3x
BenchmarkAtof64Big 3934 691 5.7x
BenchmarkAtof64RandomBits 34060 899 37.9x
BenchmarkAtof64RandomFloats 1329 680 2.0x
See F. Loitsch, ``Printing Floating-Point Numbers Quickly and
Accurately with Integers'', Proceedings of the ACM, 2010.
R=ality, rsc
CC=golang-dev, remy
https://golang.org/cl/5494068
This is like the ill-fated CL 5493063 except that
I have written a shell script (autogen.sh) instead of
thinking I could possibly write a correct Makefile.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/5496075
An old update for API changes in reflect package left several
helper variables that do not have a meaning anymore, and
the type checking of arrays vs slices was broken.
Fixes#2513.
R=ultrotter, rsc
CC=golang-dev, remy
https://golang.org/cl/5488094
The longest numbers we have to represent are the smallest denormals.
Their decimal mantissa is not longer than 5^1100. Taking into
account some extra size for in-place operations, 800 digits are
enough. This saves time used for zero intiialization of extra
bytes.
old ns/op new ns/op delta
strconv_test.BenchmarkAtof64Decimal 521 334 -35.9%
strconv_test.BenchmarkAtof64Float 572 391 -31.6%
strconv_test.BenchmarkAtof64FloatExp 10242 10036 -2.0%
strconv_test.BenchmarkAtof64Big 4229 4029 -4.7%
strconv_test.BenchmarkFormatFloatDecimal 1396 934 -33.1%
strconv_test.BenchmarkFormatFloat 4295 3341 -22.2%
strconv_test.BenchmarkFormatFloatExp 12035 11181 -7.1%
strconv_test.BenchmarkFormatFloatBig 4213 3229 -23.4%
strconv_test.BenchmarkAppendFloatDecimal 1031 600 -41.8%
strconv_test.BenchmarkAppendFloat 3971 3044 -23.3%
strconv_test.BenchmarkAppendFloatExp 11699 11003 -5.9%
strconv_test.BenchmarkAppendFloatBig 3836 2915 -24.0%
R=golang-dev, bradfitz, rsc
CC=golang-dev, remy
https://golang.org/cl/5491064
Not all syscalls are implemented, but many are. On the suggestion
of Joel Sing <jsing@google.com>, the generated files were added
with hg add instead of hg cp, since they are generated on an OS
dependant basis.
R=golang-dev, jsing, mikioh.mikioh
CC=golang-dev
https://golang.org/cl/5491050
We still very much assume it in the code, but with this change in
place we can implement other things later without changing and users
of the package.
Fixes#2319.
R=golang-dev, bradfitz, r
CC=golang-dev
https://golang.org/cl/5489073
Add NetBSD to mksignals.sh and generate files.
While we're here, also add netbsd to the +build list where appropriate.
R=golang-dev, jsing
CC=golang-dev
https://golang.org/cl/5492064
That was the last build that was close to working.
I will try that change again next week.
Make is being very subtle today.
At the reverted-to CL, the ARM traceback appears
to be broken. I'll look into that next week too.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/5492063
- no empty lines inside empty structs and interfaces
- top-level declarations are separated by a blank line if
a) they are of different kind (e.g. const vs type); or
b) there are documentation comments associated with a
declaration (this is new)
- applied gofmt -w misc src
The actual changes are in go/printer/nodes.go:397-400 (empty structs/interfaces),
and go/printer/printer.go:307-309 (extra line break). The remaining
changes are cleanups w/o changing the existing functionality.
Fixes issue 2570.
R=rsc
CC=golang-dev
https://golang.org/cl/5493057
Why it was not failing anywhere else I don't know,
but the Makefile was definitely wrong. The rules
must not run in parallel.
TBR=r
CC=golang-dev
https://golang.org/cl/5489069
I am looking forward to not supporting two build
systems simultaneously. Make complains about
a circular dependency still, but I don't understand it
and it's probably not worth the time to figure out.
TBR=r
CC=golang-dev
https://golang.org/cl/5496058
Collapse the arch,os-specific directories into the main directory
by renaming xxx/foo.c to foo_xxx.c, and so on.
There are no substantial edits here, except to the Makefile.
The assumption is that the Go tool will #define GOOS_darwin
and GOARCH_amd64 and will make any file named something
like signals_darwin.h available as signals_GOOS.h during the
build. This replaces what used to be done with -I$(GOOS).
There is still work to be done to make runtime build with
standard tools, but this is a big step. After this we will have
to write a script to generate all the generated files so they
can be checked in (instead of generated during the build).
R=r, iant, r, lucio.dere
CC=golang-dev
https://golang.org/cl/5490053
Gotest tries to build things, for which it invokes make,
and it was too hard to coordinate go invoking gotest
invoking go to build the test binary, so put all the code
here instead. Gotest will be deleted once we switch.
The only code that really made sense to copy verbatim
was the flag parsing.
This remains a work in progress. There are still plenty
of things to clean up and make better, but this is a good
checkpoint. It can run all the tests in the tree (except
runtime, which it can't build yet).
$ go test all -short
ok archive/tar
ok archive/zip
ok bufio
? builtin [no test files]
ok bytes
ok compress/bzip2
ok compress/flate
ok compress/gzip
ok compress/lzw
ok compress/zlib
ok container/heap
ok container/list
ok container/ring
? crypto [no test files]
ok crypto/aes
ok crypto/bcrypt
ok crypto/blowfish
ok crypto/cast5
ok crypto/cipher
ok crypto/des
ok crypto/dsa
ok crypto/ecdsa
ok crypto/elliptic
ok crypto/hmac
ok crypto/md4
ok crypto/md5
ok crypto/ocsp
ok crypto/openpgp
ok crypto/openpgp/armor
ok crypto/openpgp/elgamal
? crypto/openpgp/error [no test files]
ok crypto/openpgp/packet
ok crypto/openpgp/s2k
ok crypto/rand
ok crypto/rc4
ok crypto/ripemd160
ok crypto/rsa
ok crypto/sha1
ok crypto/sha256
ok crypto/sha512
ok crypto/subtle
ok crypto/tls
ok crypto/twofish
ok crypto/x509
? crypto/x509/pkix [no test files]
ok crypto/xtea
ok debug/dwarf
ok debug/elf
ok debug/gosym
ok debug/macho
ok debug/pe
ok encoding/ascii85
ok encoding/asn1
ok encoding/base32
ok encoding/base64
ok encoding/binary
ok encoding/csv
ok encoding/git85
ok encoding/gob
ok encoding/hex
ok encoding/json
ok encoding/pem
ok encoding/xml
ok errors
ok exp/ebnf
? exp/ebnflint [no test files]
ok exp/gotype
ok exp/norm
ok exp/spdy
ok exp/sql
ok exp/sql/driver
ok exp/ssh
ok exp/types
ok expvar
ok flag
ok fmt
ok go/ast
ok go/build
ok go/doc
ok go/parser
ok go/printer
ok go/scanner
ok go/token
? hash [no test files]
ok hash/adler32
ok hash/crc32
ok hash/crc64
ok hash/fnv
ok html
ok html/template
ok image
? image/bmp [no test files]
? image/color [no test files]
ok image/draw
? image/gif [no test files]
ok image/jpeg
ok image/png
ok image/tiff
ok image/ycbcr
ok index/suffixarray
ok io
ok io/ioutil
ok log
ok log/syslog
ok math
ok math/big
ok math/cmplx
ok math/rand
ok mime
ok mime/multipart
ok net
? net/dict [no test files]
ok net/http
ok net/http/cgi
ok net/http/fcgi
? net/http/httptest [no test files]
ok net/http/httputil
? net/http/pprof [no test files]
ok net/mail
ok net/rpc
ok net/rpc/jsonrpc
ok net/smtp
ok net/textproto
ok net/url
ok old/netchan
ok old/regexp
ok old/template
ok os
ok os/exec
ok os/signal
ok os/user
ok patch
ok path
ok path/filepath
ok reflect
ok regexp
ok regexp/syntax
# cd /Users/rsc/g/go/src/pkg/runtime; 6g -o /var/folders/mw/qfnx8hhd1_s9mm9wtbng0hw80000gn/T/go-build874847916/runtime_test/_obj/_go_.6 -p runtime_test -I /var/folders/mw/qfnx8hhd1_s9mm9wtbng0hw80000gn/T/go-build874847916 append_test.go chan_test.go closure_test.go gc_test.go mfinal_test.go proc_test.go sema_test.go softfloat64_test.go symtab_test.go
proc_test.go:87: undefined: runtime.Entersyscall
proc_test.go:88: undefined: runtime.Exitsyscall
proc_test.go:111: undefined: runtime.Entersyscall
proc_test.go:116: undefined: runtime.Exitsyscall
softfloat64_test.go:79: undefined: Fadd64
softfloat64_test.go:80: undefined: Fsub64
softfloat64_test.go:82: undefined: Fmul64
softfloat64_test.go:83: undefined: Fdiv64
softfloat64_test.go:94: undefined: F64to32
softfloat64_test.go:99: undefined: F32to64
softfloat64_test.go:99: too many errors
exit status 1
FAIL runtime [build failed]
? runtime/cgo [no test files]
ok runtime/debug
ok runtime/pprof
ok sort
ok strconv
ok strings
ok sync
ok sync/atomic
? syscall [no test files]
? testing [no test files]
? testing/iotest [no test files]
ok testing/quick
ok testing/script
ok text/scanner
ok text/tabwriter
ok text/template
ok text/template/parse
ok time
ok unicode
ok unicode/utf16
ok unicode/utf8
? unsafe [no test files]
ok websocket
$
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/5495055
In 'go test' I deleted the leading package. prefix
from all the test names, since it contained no actual
information. Adjust the -test.run argument accordingly.
This will still work with the current gotest too, since
the argument is an unanchored pattern.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/5491058
An example for a method M() of type T can be written as
func ExampleT_M() { ... }.
To differentiate between multiple examples for one function, type or
method a suffix with a lowercase start may be appended to the name
of the example function, e.g. ExampleFoo_basicUsage.
Fixes#2465.
R=golang-dev, adg, r, rsc, duperray.olivier, r
CC=golang-dev
https://golang.org/cl/5440100
I'm not 100% sure I get all the corner cases right, for end tags, but
I'll let the test suite smoke it out.
Pass tests10.dat, test 1:
<!DOCTYPE html><svg></svg><![CDATA[a]]>
| <!DOCTYPE html>
| <html>
| <head>
| <body>
| <svg svg>
| <!-- [CDATA[a]] -->
Also pass tests through test 5:
<!DOCTYPE html><body><table><svg></svg></table>
R=andybalholm
CC=golang-dev
https://golang.org/cl/5495044
In some rare cases, gofmt would accept more than the maximum
number of empty lines (1) between source code snippets.
The actual change is in printer.go, lines 773-775; the rest
is some minor restructuring.
Applied gofmt -w src misc .
Fixes#2387.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/5496047
If a Pipe method is called, return the underlying
reader/writer from session.clientChan, bypassing the
io.Copy and io.Pipe harness.
StdoutPipe and StderrPipe now return an io.Reader not
an io.ReadCloser as SSH cannot signal the close of the
local reader to the remote process.
R=rsc, agl, gustav.paul, cw
CC=golang-dev
https://golang.org/cl/5493047
Just a rearrangement except for a couple of new functions
and names so govet.go can have all the generic walk routines.
R=rsc
CC=golang-dev
https://golang.org/cl/5489058
%g down to two mallocs from four. Also a mild speedup.
fmt_test.BenchmarkSprintfFloat 3016 2703 -10.38%
Fixes#2557.
R=rsc
CC=golang-dev
https://golang.org/cl/5491054
Before/after, best of 3:
json.BenchmarkCodeEncoder 10 183495300 ns/op 10.58 MB/s
->
json.BenchmarkCodeEncoder 10 133025100 ns/op 14.59 MB/s
But don't get too excited about this. These benchmarks, while
stable at any point of time, fluctuate wildly with any line of
code added or removed anywhere in the path due to stack splitting
issues.
It's currently much faster, though, and this is the API that
doesn't allocate so should always be faster in theory.
R=golang-dev, dsymonds, rsc, r, gri
CC=golang-dev
https://golang.org/cl/5411052
The plan is to make 'go test' replace gotest entirely, so it
cannot refer to gotest's godoc. Instead, copy gotest's
documentation in as three different help messages:
'go help test', 'go help testflag', and 'go help testfunc'.
R=r
CC=golang-dev
https://golang.org/cl/5491048
It is probably a mistake to have these here at all -
os is supposed to be portable - but this only fixes
the build issue.
R=golang-dev, r, r, iant
CC=golang-dev
https://golang.org/cl/5487073
I have included a few important microbenchmarks,
but the overall intent is to have mostly end-to-end
benchmarks timing real world operations.
The jsondata.go file is a summary of agl's
activity in various open source repositories.
It gets used as test data for many of the benchmarks.
Everything links into one binary (even the test data)
so that it is easy to run the benchmarks on many
computers: there is just one file to copy around.
R=golang-dev, r, bradfitz, adg, r
CC=golang-dev
https://golang.org/cl/5484071
This avoids degraded performance caused by extra labels
emitted by inlining (breaking strconv ftoa alloc count unittest) and is better in any case.
R=rsc
CC=golang-dev
https://golang.org/cl/5483071
clean is gone; all the intermediate files are created
in a temporary tree that is wiped when the command ends.
Not using go/build's Script because it is not well aligned
with this API. The various builder methods are copied from
go/build and adapted. Probably once we delete goinstall
we can delete the Script API too.
R=rogpeppe, adg, adg
CC=golang-dev
https://golang.org/cl/5483069
Pass tests6.dat, test 26:
foo<col>
| <col>
Also pass tests through test 35:
<table><tr><div><td>
R=nigeltao
CC=golang-dev
https://golang.org/cl/5482074
I realize I didn't send the tests in last time. Anyway, I added
a test that knows too much about the package's internal structure,
and I'm not sure whether it's the right thing to do.
Vadik.
R=bradfitz, rsc, go.peter.90
CC=golang-dev
https://golang.org/cl/5450073
This redefinition means that the public signature of html/template
does not refer to text/template.
Fixes#2546.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/5487083
We only want to attempt to un-gzip if there's a body (not in
response to a HEAD)
This was accidentally passing before, but revealed to be broken
when c3c6e72d7cc went in.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/5477093
The obvious fix is breaking the build in non-obvious ways.
Reverting while waiting for the correct fix, if any is needed.
««« original CL description
net/http: fix bug in error checking
Thanks to josef86@gmail.com for pointing this out.
R=golang-dev, iant
CC=golang-dev
https://golang.org/cl/5477092
»»»
R=iant
CC=golang-dev
https://golang.org/cl/5488085
Cross- and intra package inlining of single assignments or return <expression>.
Minus some hairy cases, currently including other calls, expressions with closures and ... arguments.
R=rsc, rogpeppe, adg, gri
CC=golang-dev
https://golang.org/cl/5400043
breaks 64-bit build
««« original CL description
8c: handle 64-bit switch value
Cases must still be 32-bit values, but one thing at a time.
R=ality, ken2, ken
CC=golang-dev
https://golang.org/cl/5485063
»»»
R=ken2
CC=golang-dev
https://golang.org/cl/5488075
The transmitter must encode an interface value if it is to be decoded
into an interface value, but it's a common and confusing error to
encode a concrete value and attempt to decode it into an interface,
particularly *interface{}. This CL attempts to explain things better.
Fixes#2367.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/5485072
Testing total space fails for gccgo when not using split
stacks, because then each goroutine has a large stack, and so
the total memory usage is large.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/5487068
I was confused by the existence of two portable Hypot
routines in the tree when I cleaned things up, and I made
ARM use the wrong (imprecise) one. Use the right one,
and delete the wrong one.
Fixes arm build.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/5485065
breaks build
««« original CL description
http: close connection after printing panic stack trace
In a testing situation, it's possible for a local http
server to panic and the test exit without the stack trace
ever being printed.
Fixes#2480.
R=rsc, bradfitz
CC=golang-dev
https://golang.org/cl/5414048
»»»
R=bradfitz
CC=golang-dev
https://golang.org/cl/5482061
In a testing situation, it's possible for a local http
server to panic and the test exit without the stack trace
ever being printed.
Fixes#2480.
R=rsc, bradfitz
CC=golang-dev
https://golang.org/cl/5414048
This will be nicer to the automatic tools.
It requires a few more assembly stubs
but fewer Go files.
There are a few instances where it looks like
there are new blobs of code, but they are just
being copied out of deleted files.
There is no new code here.
Suppose you have a portable implementation for Sin
and a 386-specific assembly one. The old way to
do this was to write three files
sin_decl.go
func Sin(x float64) float64 // declaration only
sin_386.s
assembly implementation
sin_port.go
func Sin(x float64) float64 { ... } // pure-Go impl
and then link in either sin_decl.go+sin_386.s or
just sin_port.go. The Makefile actually did the magic
of linking in only the _port.go files for those without
assembly and only the _decl.go files for those with
assembly, or at least some of that magic.
The biggest problem with this, beyond being hard
to explain to the build system, is that once you do
explain it to the build system, godoc knows which
of sin_port.go or sin_decl.go are involved on a given
architecture, and it (correctly) ignores the other.
That means you have to put identical doc comments
in both files.
The new approach, which is more like what we did
in the later packages math/big and sync/atomic,
is to have
sin.go
func Sin(x float64) float64 // decl only
func sin(x float64) float64 {...} // pure-Go impl
sin_386.s
// assembly for Sin (ignores sin)
sin_amd64.s
// assembly for Sin: jmp sin
sin_arm.s
// assembly for Sin: jmp sin
Once we abandon Makefiles we can put all the assembly
stubs in one source file, so the number of files will
actually go down.
Chris asked whether the branches cost anything.
Given that they are branching to pure-Go implementations
that are not typically known for their speed, the single
direct branch is not going to be noticeable. That is,
it's on the slow path.
An alternative would have been to preserve the old
"only write assembly files when there's an implementation"
and still have just one copy of the declaration of Sin
(and thus one doc comment) by doing:
sin.go
func Sin(x float64) float64 { return sin(x) }
sin_decl.go
func sin(x float64) float64 // declaration only
sin_386.s
// assembly for sin
sin_port.go
func sin(x float64) float64 { portable code }
In this version everyone would link in sin.go and
then either sin_decl.go+sin_386.s or sin_port.go.
This has an extra function call on all paths, including
the "fast path" to get to assembly, and it triples the
number of Go files involved compared to what I did
in this CL. On the other hand you don't have to
write assembly stubs. After starting down this path
I decided that the assembly stubs were the easier
approach.
As for generating the assembly stubs on the fly, much
of the goal here is to eliminate magic from the build
process, so that zero-configuration tools like goinstall
or the new go tool can handle this package.
R=golang-dev, r, cw, iant, r
CC=golang-dev
https://golang.org/cl/5488057
This CL is concerned with the basic Package structure
and applies it to the (trivial) implementations of the
doc, fmt, fix, list, and vet commands.
The command as a whole is still very much a work in progress.
In particular, work making the error messages look nice
is deferred to a future CL.
R=golang-dev, adg, dsymonds, r
CC=golang-dev
https://golang.org/cl/5482048
Apparently it is broken. Disable so that dashboard
will let us see other breakages on Windows.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/5477081
Example:
PACKAGE
package utf8
import "unicode/utf8"
Package utf8 implements functions and constants to support text
encoded in UTF-8. This package calls a Unicode character a rune for
brevity.
CONSTANTS
const (
RuneError = unicode.ReplacementChar // the "error" Rune or "replacement character".
RuneSelf = 0x80 // characters below Runeself are represented as themselves in a single byte.
UTFMax = 4 // maximum number of bytes of a UTF-8 encoded Unicode character.
)
Numbers fundamental to the encoding.
FUNCTIONS
func DecodeLastRune(p []byte) (r rune, size int)
DecodeLastRune unpacks the last UTF-8 encoding in p and returns the
rune and its width in bytes.
func DecodeLastRuneInString(s string) (r rune, size int)
DecodeLastRuneInString is like DecodeLastRune but its input is a
string.
func DecodeRune(p []byte) (r rune, size int)
DecodeRune unpacks the first UTF-8 encoding in p and returns the rune
and its width in bytes.
func DecodeRuneInString(s string) (r rune, size int)
DecodeRuneInString is like DecodeRune but its input is a string.
func EncodeRune(p []byte, r rune) int
EncodeRune writes into p (which must be large enough) the UTF-8
encoding of the rune. It returns the number of bytes written.
func FullRune(p []byte) bool
FullRune reports whether the bytes in p begin with a full UTF-8
encoding of a rune. An invalid encoding is considered a full Rune
since it will convert as a width-1 error rune.
func FullRuneInString(s string) bool
FullRuneInString is like FullRune but its input is a string.
func RuneCount(p []byte) int
RuneCount returns the number of runes in p. Erroneous and short
encodings are treated as single runes of width 1 byte.
func RuneCountInString(s string) (n int)
RuneCountInString is like RuneCount but its input is a string.
func RuneLen(r rune) int
RuneLen returns the number of bytes required to encode the rune.
func RuneStart(b byte) bool
RuneStart reports whether the byte could be the first byte of an
encoded rune. Second and subsequent bytes always have the top two
bits set to 10.
func Valid(p []byte) bool
Valid reports whether p consists entirely of valid UTF-8-encoded
runes.
func ValidString(s string) bool
ValidString reports whether s consists entirely of valid UTF-8-encoded
runes.
TYPES
type String struct {
// contains filtered or unexported fields
}
String wraps a regular string with a small structure that provides
more efficient indexing by code point index, as opposed to byte index.
Scanning incrementally forwards or backwards is O(1) per index
operation (although not as fast a range clause going forwards).
Random access is O(N) in the length of the string, but the overhead is
less than always scanning from the beginning. If the string is ASCII,
random access is O(1). Unlike the built-in string type, String has
internal mutable state and is not thread-safe.
func NewString(contents string) *String
NewString returns a new UTF-8 string with the provided contents.
func (s *String) At(i int) rune
At returns the rune with index i in the String. The sequence of runes
is the same as iterating over the contents with a "for range" clause.
func (s *String) Init(contents string) *String
Init initializes an existing String to hold the provided contents.
It returns a pointer to the initialized String.
func (s *String) IsASCII() bool
IsASCII returns a boolean indicating whether the String contains only
ASCII bytes.
func (s *String) RuneCount() int
RuneCount returns the number of runes (Unicode code points) in the
String.
func (s *String) Slice(i, j int) string
Slice returns the string sliced at rune positions [i:j].
func (s *String) String() string
String returns the contents of the String. This method also means the
String is directly printable by fmt.Print.
Fixes#2479.
R=golang-dev, dsymonds, mattn.jp, r, gri, r
CC=golang-dev
https://golang.org/cl/5472051
don't crash when printing error messages about symbols in a garbled state.
render OCOMPLIT in export mode.
R=rsc
CC=golang-dev
https://golang.org/cl/5466045
To allow these types as map keys, we must fill in
equal and hash functions in their algorithm tables.
Structs or arrays that are "just memory", like [2]int,
can and do continue to use the AMEM algorithm.
Structs or arrays that contain special values like
strings or interface values use generated functions
for both equal and hash.
The runtime helper func runtime.equal(t, x, y) bool handles
the general equality case for x == y and calls out to
the equal implementation in the algorithm table.
For short values (<= 4 struct fields or array elements),
the sequence of elementwise comparisons is inlined
instead of calling runtime.equal.
R=ken, mpimenov
CC=golang-dev
https://golang.org/cl/5451105