Two edge cases that were mentioned in the docs are actually impossible:
* For NIST curves, ECDH can't fail, since the zero scalar is rejected
by NewPrivateKey, the identity point is rejected by NewPublicKey,
and NIST curves are a prime-order group.
Let's call the inputs to scalar multiplication k and P, and the
order of the group q. If k[P] is the identity, and also q[P] is the
identity by definition, then P's order is a divisor of q-k, because
k[P] + [q-k]P = q[P] = I
P's order is either 1 or q, and can only be a divisor of q-k if it's
1 (so P is the identity), or if k is zero.
* For X25519, PrivateKey.PublicKey can't return the all-zero value,
since no value is equivalent to zero after clamping.
Clamping unsets the lowest three bit, sets the second-to-highest
bit, and unsets the top bit; this means that a scalar equivalent to
zero needs to be a multiple of 8*q, and needs to be between 2**254
and 2**255-1, but 8*p > 2**255-1.
Tests for other exotic edge cases such as non-canonical point encodings,
clamping, points on the twist, and low-order components are covered by
x/crypto/wycheproof.
Change-Id: I731a878c58bd59aee5636211dc0f19ad8cfae9db
Reviewed-on: https://go-review.googlesource.com/c/go/+/425463
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Run-TryBot: Filippo Valsorda <filippo@golang.org>
Auto-Submit: Filippo Valsorda <filippo@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
In https://build.golang.org/log/d2eb315305bf3d513c490e7f85d56e9a016aacd2,
we observe a failure in TestPipeLookPathLeak due to an additional
descriptor (7) that was open at the start of the test being closed while
the test executes.
I haven't dug much into the failure, but it seems plausible to me that the
descriptor may have been opened by libc for some reason, and may have been
closed due to some sort of idle timeout or the completion of a background
initialization routine.
Since the test is looking for a leak, and closing an existing descriptor
does not indicate a leak, let's not fail the test if an existing descriptor
is unexpectedly closed.
Updates #5071.
Change-Id: I03973ddff6592c454cfcc790d6e56accd051dd52
Reviewed-on: https://go-review.googlesource.com/c/go/+/447235
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The -C flag is like tar -C or make -C: it changes to the named directory
early in command startup, before anything else happens.
Fixes#50332.
Change-Id: I8e4546f69044cb3a028d4d26dfba482b08cb845d
Reviewed-on: https://go-review.googlesource.com/c/go/+/421436
Reviewed-by: Bryan Mills <bcmills@google.com>
Auto-Submit: Russ Cox <rsc@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Currently, with PGO, the inliner uses node weights to decide if a
function is inlineable (with a larger budget). But the actual
inlining is determined by the weight of the call edge. There is a
discrepancy that, if a callee node is hot but the call edge is not,
it would not inlined, and marking the callee inlineable would of
no use.
Instead of using two kinds of weights, we just use the edge
weights to decide inlineability. If a function is the callee of a
hot call edge, its inlineability is determined with a larger
threshold. For a function that exceeds the regular inlining budget,
it is still inlined only when the call edge is hot, as it would
exceed the regular inlining cost for non-hot call sites, even if
it is marked inlineable.
For #55022.
Change-Id: I93fa9919fc6bcbb394e6cfe54ec96a96eede08f7
Reviewed-on: https://go-review.googlesource.com/c/go/+/447015
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
CC-BY-3.0 was shiny and new back in 2009, but CC-BY-4.0 is
generally preferred now. Update our CC-BY uses to CC-BY-4.0.
Google lawyers signed off on the overall CC-BY-4.0 update
and Renee French signed off on the update of the gopher license.
See also CL 447156.
Change-Id: I3908910d6011ed733271e595f761c773351b30f7
Reviewed-on: https://go-review.googlesource.com/c/go/+/447275
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Russ Cox <rsc@golang.org>
We don't have a formatter for these files, so check here that
they are in the right form to allow 'cat next/*.txt >go1.X.txt'
at the end of each cycle.
Fix the api files that the check finds.
Change-Id: I0c5e4ab11751c7d0afce32503131d487313f41c0
Reviewed-on: https://go-review.googlesource.com/c/go/+/431335
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Auto-Submit: Russ Cox <rsc@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
We were mishandling {{range $i = .}}, treating it as though it were
{{range $i := .}}. That happened to work if $i were the most recently
declared variable, but not otherwise.
Fixes#56490
Change-Id: I222a009d671d86c06a980a54388e05f12101c00b
Reviewed-on: https://go-review.googlesource.com/c/go/+/446795
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
net.IP states that a 16-byte slice can still be an IPv4 address.
But after netip.Addr is introduced, it requires extra care to keep
it as an IPv4 address when converting it to a netip.Addr using
netip.AddrFromSlice.
To address this issue, let's change the cgo resolver to return
4-byte net.IP for IPv4. The change will save us 12 bytes too.
Please note that the go resolver already return IPv4 as 4-byte
slice.
The test TestResolverLookupIP has been modified to cover this
behavior. So no new test is added.
Fixes#53554.
Change-Id: I0dc2a59ad785c0c67a7bc22433105529f055997f
GitHub-Last-Rev: bd7bb2f17b
GitHub-Pull-Request: golang/go#53638
Reviewed-on: https://go-review.googlesource.com/c/go/+/415580
Auto-Submit: Damien Neil <dneil@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Reviewed-by: Damien Neil <dneil@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
For #56041
Change-Id: I6c98458b5c0d3b3636a53ee04fc97221f3fd8bbc
Reviewed-on: https://go-review.googlesource.com/c/go/+/444817
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Run-TryBot: xie cui <523516579@qq.com>
Randomized feature enable/disable might be something we use to
help users debug any problems with changed loop variable capture,
and there's another CL that would like to use it to help in
locating places where "fused" multiply add instructions change
program behavior.
This CL:
- adds the ability to include an integer parameter (e.g. line number)
- replumbed the environment variable into a flag to simplify go build cache management
- but added an environment variable to allow flag setting through the environment
- which adds the possibility of switching on a different variable
(if there's one built-in for variable capture, it shouldn't be GOSSAHASH)
- cleaned up the checking code
- adds tests for all the intended behavior
- removes the case for GSHS_LOGFILE; TBD whether we'll need to put that back
or if there is another way.
Change-Id: I8503e1bb3dbc4a743aea696e04411ea7ab884787
Reviewed-on: https://go-review.googlesource.com/c/go/+/443063
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: David Chase <drchase@google.com>
There does not seem to be any point to this sync.Once.
I noticed because I was surveying uses of sync.Once to
understand usage patterns. This seems to be a dreg left over
from some earlier instance of the code.
Change-Id: I99dd258d865a41d0e8f6cfa55887855e477fb9c2
Reviewed-on: https://go-review.googlesource.com/c/go/+/445755
Auto-Submit: Russ Cox <rsc@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Fuzz tests are meant to be run just like ordinary tests,
so copy the same loop cpu and count loops used in testing.go
(and benchmark.go) into fuzz.go.
Change-Id: Ic585df8ccc577869c877b1055e0493803dbeb828
Reviewed-on: https://go-review.googlesource.com/c/go/+/443377
Auto-Submit: Russ Cox <rsc@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
It adds support for no-reload option, as specified in resolv.conf(5):
no-reload (since glibc 2.26)
Sets RES_NORELOAD in _res.options. This option
disables automatic reloading of a changed
configuration file.
Change-Id: I11182c5829434503f719ed162014f2301e3ba8d4
GitHub-Last-Rev: 7ae44be2d5
GitHub-Pull-Request: golang/go#56489
Reviewed-on: https://go-review.googlesource.com/c/go/+/446555
Reviewed-by: Damien Neil <dneil@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Fixes AIX build.
Change-Id: Icbb33896017bbcc488a8baff20e10eb0e14ea4b9
Reviewed-on: https://go-review.googlesource.com/c/go/+/447095
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
The global ListOfHotCallSites set is used to communicate between
CanInline and InlineCalls the set of call sites that InlineCalls may
increase the budget for.
CanInline clears this map on each call, thus assuming that
InlineCalls(x) is called immediately after CanInline(x). This assumption
is false, as CanInline (among other cases) is recursive (CanInline ->
hairyVisitor.doNode -> inlCallee -> CanInline).
When this assumption proves false, we will lose the opportunity to
inline hot calls.
This CL is the least invasive fix for this. ListOfHotCallSites is
actually just a subset of the candHotEdgeMap, with CallSiteInfo.Callee
cleared. candHotEdgeMap doesn't actually need to distinguish based on
Callee, so we can drop callee from candHotEdgeMap as well and just use
that directly [1].
Later CLs should do more work to remove the globals entirely.
For cmd/compile, this inceases the number of PGO inlined functions by
~50% for one set of PGO parameters. I have no evaluated performance
impact.
[1] This is something that we likely want to change in the future.
For #55022.
Change-Id: I57735958d651f6dfa9bd296499841213d20e1706
Reviewed-on: https://go-review.googlesource.com/c/go/+/446755
Auto-Submit: Michael Pratt <mpratt@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
ErrWaitDelay is not expected to occur in this test, but if it does
it indicates a failure mode very different from the “failed to start”
catchall that we log for other non-ExitError errors.
Updates #50436.
Change-Id: I3f4d87d502f772bf471fc17303d5a6b483446f8f
Reviewed-on: https://go-review.googlesource.com/c/go/+/446876
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Bryan Mills <bcmills@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
I noticed some test failures in the build dashboard after CL 445597
that made me realize the grace period should be based on the test
timeout, not the Context timeout: if the test itself sets a short
timeout for a command, we still want to give the test process enough
time to consume and log its output.
I also put some more thought into how one might debug a test hang, and
realized that in that case we don't want to set a WaitDelay at all:
instead, we want to leave the processes in their stuck state so that
they can be investigated with tools like `ps` and 'lsof'.
Updates #50436.
Change-Id: I65421084f44eeaaaec5dd2741cd836e9e68dd380
Reviewed-on: https://go-review.googlesource.com/c/go/+/446875
Auto-Submit: Bryan Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
We reused p so we were deleting the same directory twice instead of two
different directories. Fix that.
For #47257
Change-Id: I315ad87d0a9182e00ae4c11b82986227e2b02e17
Reviewed-on: https://go-review.googlesource.com/c/go/+/447115
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Otherwise given a file like defs_nacl_amd64p32.go.~1~ we will add
"nacl" and "amd64p32" to AllTags. This was causing the
cmd/go/internal/modindex tests to fail on my system, since I had
an old editor backup file lying around.
Change-Id: Ib1c5d835e4871addae6dc78cee07c9839bb880e2
Reviewed-on: https://go-review.googlesource.com/c/go/+/446395
Reviewed-by: Bryan Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Auto-Submit: Ian Lance Taylor <iant@google.com>
The go1 benchmark suite does a lot of work at package init time, which
makes it take quite a while to run even if you're not running any of
the benchmarks, or if you're only running a subset of them. This leads
to an awkward workaround in dist test to compile but not run the
package, unlike roughly all other packages. It also reduces isolation
between benchmarks by affecting the starting heap size of all
benchmarks.
Fix this by initializing all data required by a benchmark when that
benchmark runs, and keeping it local so it gets freed by the GC and
doesn't leak between benchmarks. Now, none of the benchmarks depend on
global state.
Re-initializing the data on each benchmark run does add overhead to an
actual benchmark run, as each benchmark function is called several
times with different values of b.N. A full run of all benchmarks at
the default -benchtime=1s now takes ~10% longer; higher -benchtimes
would be less. It would be quite difficult to cache this data between
invocations of the same benchmark function without leaking between
different benchmarks and affecting GC overheads, as the testing
package doesn't provide any mechanism for this.
This reduces the time to run the binary with no benchmarks from 1.5
seconds to 10 ms, and also reduces the memory required to do this from
342 MiB to 17 MiB.
To make sure data was not leaking between different benchmarks, I ran
the benchmarks with -shuffle=on. The variance remained low: mostly
under 3%. A few benchmarks had higher variance, but in all cases it
was similar to the variance between this change.
This CL naturally changes the measured performance of several of the
benchmarks because it dramatically changes the heap size and hence GC
overheads. However, going forward the benchmarks should be much better
isolated.
For #37486.
Change-Id: I252ebea703a9560706cc1990dc5ad22d1927c7a0
Reviewed-on: https://go-review.googlesource.com/c/go/+/443336
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
Run-TryBot: Austin Clements <austin@google.com>
The result of the call to fmt.Errorf was unused. It was clearly
intending to print the message, not simply construct an error.
Change-Id: I14856214c521a51fe4b45690e6c35fbb17e66577
Reviewed-on: https://go-review.googlesource.com/c/go/+/443375
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
If TestArenaCollision cannot reserve the address range it expects to
reserve, it currently fails somewhat mysteriously. Detect this case
and skip the test. This could lead to test rot if we wind up always
skipping this test, but it's not clear that there's a better answer.
If the test does fail, we now also log what it thinks it reserved so
the failure message is more useful in debugging any issues.
Fixes#49415Fixes#54597
Change-Id: I05cf27258c1c0a7a3ac8d147f36bf8890820d59b
Reviewed-on: https://go-review.googlesource.com/c/go/+/446877
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Check for and reject environment variables containing NULs.
The conventions for passing environment variables to subprocesses
cause most or all systems to interpret a NUL as a separator. The
syscall package rejects environment variables containing a NUL
on most systems, but erroniously did not do so on Windows. This
causes an environment variable such as "FOO=a\x00BAR=b" to be
interpreted as "FOO=a", "BAR=b".
Check for and reject NULs in environment variables passed to
syscall.StartProcess on Windows.
Add a redundant check to os/exec as extra insurance.
Fixes#56284
Fixes CVE-2022-41716
Change-Id: I2950e2b0cb14ebd26e5629be1521858f66a7d4ae
Reviewed-on: https://team-review.git.corp.google.com/c/golang/go-private/+/1609434
Run-TryBot: Damien Neil <dneil@google.com>
Reviewed-by: Tatiana Bradley <tatianabradley@google.com>
Reviewed-by: Roland Shoemaker <bracewell@google.com>
TryBot-Result: Security TryBots <security-trybots@go-security-trybots.iam.gserviceaccount.com>
Reviewed-on: https://go-review.googlesource.com/c/go/+/446916
Reviewed-by: Tatiana Bradley <tatiana@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Track the running tests and when they started,
so that we can report the running tests on a test timeout.
% go test -timeout=5s
panic: test timed out after 5s
running tests:
TestTCPSpuriousConnSetupCompletion (4s)
... stack traces as usual ...
% go test -run=Script -timeout=10s cmd/go
vcs-test.golang.org rerouted to http://127.0.0.1:65168https://vcs-test.golang.org rerouted to https://127.0.0.1:65169
go test proxy running at GOPROXY=http://127.0.0.1:65170/mod
panic: test timed out after 10s
running tests:
TestScript (10s)
TestScript/mod_get_patchcycle (0s)
TestScript/mod_get_prefer_incompatible (0s)
TestScript/mod_get_promote_implicit (0s)
TestScript/mod_get_pseudo (0s)
TestScript/mod_get_pseudo_other_branch (0s)
TestScript/mod_get_pseudo_prefix (0s)
TestScript/mod_get_test (0s)
TestScript/mod_get_trailing_slash (0s)
TestScript/mod_get_update_unrelated_sum (0s)
TestScript/mod_gobuild_import (0s)
TestScript/mod_gomodcache (0s)
TestScript/mod_gonoproxy (0s)
TestScript/mod_load_badchain (0s)
TestScript/mod_overlay (0s)
TestScript/test_fuzz_minimize (6s)
TestScript/test_fuzz_minimize_dirty_cov (7s)
... stack traces as usual ...
Change-Id: I3a6647c029097becc06664ebd76a2597c7ed7b8e
Reviewed-on: https://go-review.googlesource.com/c/go/+/446176
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Auto-Submit: Russ Cox <rsc@golang.org>
Use a slightly different line number pragma when emitting instrumented
code, so as to ensure that we don't get any changes in the
"-gcflags=-m" output for coverage vs non-coverage.
Fixes#56475.
Change-Id: I3079171fdf83c0434ed6ea0ce3eb2797c2280c55
Reviewed-on: https://go-review.googlesource.com/c/go/+/446259
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Change the 'PrepareForCoverageBuild' helper function to provide more
sensible defaults in the case where Go packages are listed on the
command line (e.g. cases such as "go run -cover mumble.go").
With the old implementation, if module mode was enabled, we would only
instrument packages in the main module, meaning that if you did
something like this:
$ ls go.mod
go.mod
$ GOCOVERDATA=/tmp/cov go run -cover testdata/somefile.go
$
no coverage profiles would be generated at all. This is due to the
fact that the pseudo-package created by the Go command internally when
building "somefile.go" is not considered part of the main module.
This patch moves the default to "packages explicitly mentioned on the
command line, plus packages in the main module", which will make more
sense to users passing specific packages and *.go files on the command
line. Examples:
// Here cmd/compile is part the Go standard library + commands
// (which we exclude from instrumentation by default), but since
// 'cmd/compile' is mentioned on the command line, we will instrument
// just that single package (not any of its deps).
$ cd $GOROOT/src
$ go build -o gc.exe -cover cmd/compile
$ GOCOVERDATA=/tmp/cov ./gc.exe ...
...
$
// Here we're running a Go file named on the command line, where
// the pseudo-package for the command line is not part of the
// main module, but it makes sense to instrument it anyhow.
$ cd ~/go/k8s.io/kubernetes
$ GOCOVERDATA=/tmp/cov go run -cover test/typecheck/testdata/bad/bad.go
...
$
This patch also simplifies the logic and improves flow/comments in
in the helper function PrepareForCoverageBuild.
Change-Id: Id8fc8571157dac8c09e44cc73baa05aeba1640ca
Reviewed-on: https://go-review.googlesource.com/c/go/+/445918
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
This patch fixes a typo/bug introduced in CL 441858 where when pattern
matching a coverage counter access we were looking at an assingment
node instead of the assignment LHS, and fixes a similar problem in
atomic counter update pattern matching introduced in CL 444835. In
both of these cases the bug was not caught because the test intended
to lock down the behavior was written incorrectly (wasn't
instrumenting what the test author thought it was instrumenting,
ouch).
Change-Id: I6e6ac3beacf12ef1a817de5527340b639f0bb044
Reviewed-on: https://go-review.googlesource.com/c/go/+/446258
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Than McIntosh <thanm@google.com>
When coverage testing a local package (defined by a relative import
path such as "./foo/bar") the convention when "-coverprofile" is used
has been to capture source files by full pathname, as opposed to
recording the full import path or the invented import path
("command-line-arguments/") created by the go command in the case of
building named Go files. Doing this makes it much easier to use
collected profiles with "go tool -cover -html=<profile>".
The support for this feature/convention wound up being inadvertantly
dropped during the GOEXPERIMENT=coverageredesign implementation; this
patch restores it.
Fixes#56433.
Change-Id: Ib9556fdc86011b00c155caa614ab23e5148f3eb4
Reviewed-on: https://go-review.googlesource.com/c/go/+/445917
Reviewed-by: Bryan Mills <bcmills@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Change the macOS implementation to use libc calls.
Using libc calls directly is what we do for all the runtime and os syscalls.
Doing so here as well improves consistency and also makes it possible
to cross-compile (from non-Mac systems) macOS binaries that use the
native name resolver.
Fixes#12524.
Change-Id: I011f4fcc5c50fbb5396e494889765dcbb9342336
Reviewed-on: https://go-review.googlesource.com/c/go/+/446178
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Also removes no-longer-needed "Any" field from compiler's DebugFlags.
Test/use case for this is the fmahash CL.
Change-Id: I214f02c91f30fc2ce53caf75fa5e2b905dd33429
Reviewed-on: https://go-review.googlesource.com/c/go/+/445495
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David Chase <drchase@google.com>
This an end-to-end test that sets GOROOT to a symlink
to the distribution, approximating copying it to a new
location, and checks that packages in the standard library
are not stale, as they would be if paths were embedded
in artifacts.
For #47257
Change-Id: I4ed04df36656ad946a2f6f5ce3194e76e06372e3
Reviewed-on: https://go-review.googlesource.com/c/go/+/445358
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
We kind of have this mechanism already, just normalizing it and
using it in a bunch of places. Previously a bunch of places cached
slices only for the duration of a single function compilation. Now
we can reuse slices across a whole compiler run.
Use a sync.Pool of powers-of-two sizes. This lets us use not
too much memory, and avoid holding onto memory we're no longer
using when a GC happens.
There's a few different types we need, so generate the code for it.
Generics would be useful here, but we can't use generics in the
compiler because of bootstrapping.
Change-Id: I6cf37e7b7b2e802882aaa723a0b29770511ccd82
Reviewed-on: https://go-review.googlesource.com/c/go/+/444820
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Make them a separate type, so the normal sparse maps don't
need the extra storage.
Change-Id: I3a0219487c35ea63723499723b0c742e321d97c4
Reviewed-on: https://go-review.googlesource.com/c/go/+/444819
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
The recently added rule only works before decomposing slices.
Add a rule that works after decomposing slices.
The reason we need the latter is because although the length may
be a constant, it can be hidden inside a slice that is not constant
(its pointer or capacity might be changing). By applying this
optimization after decomposing slices, we can find more cases
where it applies.
Fixes#56440
Change-Id: I0094e59eee3065ab4d210defdda8227a6e897420
Reviewed-on: https://go-review.googlesource.com/c/go/+/446277
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Since pgo is a new package, it is reasonably straightforward to
encapsulate its state into a non-global object that we pass around,
which will help keep it isolated.
There are no functional changes in this CL, just packaging up the
globals into a new object.
There are two major pieces of cleanup remaining:
1. reflectdata and noder have separate InlineCalls calls for method
wrappers. The Profile is not plumbed there yet, but this is not a
regression as the globals were previously set only right around the
main inlining pass in gc.Main.
2. pgo.ListOfHotCallSites is still global, as it will require more work
to clean up. It is effectively a local variable in InlinePackage,
except that it assumes that InlineCalls is immediately preceded by a
CanInline call for the same function. This is not necessarily true
due to the recursive nature of CanInline. This also means that some
InlineCalls calls may be missing the list of hot callsites right now.
For #55022.
Change-Id: Ic1fe41f73df96861c65f8bfeecff89862b367290
Reviewed-on: https://go-review.googlesource.com/c/go/+/446303
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Michael Pratt <mpratt@google.com>
The test added in CL 446115 was failing on Plan 9, on which the error
returned by a failed open includes the path that failed.
Change-Id: If27222596c3cb0366a030bb49ae41c4c869c3db2
Reviewed-on: https://go-review.googlesource.com/c/go/+/446641
Reviewed-by: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: David du Colombier <0intro@gmail.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Parts of package pgo fetch the line number of a node by parsing the
number out of the string returned from ir.Line().
This is indirect and inefficient, so it should be replaced with a more
direct lookup. It is also potentially buggy: ir.Line uses
ctxt.OutermostPos, i.e., the line number where an inlined node in
inlined. We want ctxt.InnermostPos, because that is the line number used
in pprof profiles that we are matching against (See comments on
OutermostPos and InnermostPos).
I'm not sure whether this was an active, as we use ir.Line before and
during inlining. I think we could see CALL nodes with OutermostPos !=
InnermostPos during midstack inlining, but I am not sure. Regardless,
explicitly using the desired position is clearer.
For #55022.
Change-Id: Ic640761c9e1d01cacbf91f3aaeaf284ad7e38dbd
Reviewed-on: https://go-review.googlesource.com/c/go/+/446302
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Michael Pratt <mpratt@google.com>
Auto-Submit: Michael Pratt <mpratt@google.com>
For most tests, the test's deadline itself is more appropriate than an
arbitrary timeout layered atop of it (especially once #48157 is
implemented), and testenv.Command already adds cleaner timeout
behavior when a command would run too close to the test's deadline.
That makes RunWithTimeout something of an attractive nuisance. For
now, migrate the two existing uses of it to testenv.CommandContext,
with a shorter timeout implemented using context.WithTimeout.
As a followup, we may want to drop the extra timeouts from these
invocations entirely.
Updates #50436.
Updates #37405.
Change-Id: I16840fd36c0137b6da87ec54012b3e44661f0d08
Reviewed-on: https://go-review.googlesource.com/c/go/+/445597
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
Auto-Submit: Bryan Mills <bcmills@google.com>
Reviewed-by: Austin Clements <austin@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This adds a testenv.CommandContext function, with timeout behavior
based on the existing logic in cmd/go.TestScript: namely, the command
is terminated with SIGQUIT (if supported) with an arbitrary grace
period remaining until the test's deadline.
If the test environment does not support executing subprocesses,
CommandContext skips the test.
If the command is terminated due to the timout expiring or the test
fails to wait for the command after starting it, CommandContext marks
the test as failing.
For tests where a shorter timeout is desired (such as for fail-fast
behavior), one may be supplied using context.WithTimeout.
The more concise Command helper is like CommandContext but without
the need to supply an explicit Context.
Updates #50436.
Change-Id: Ifd81fb86c402f034063c9e9c03045b4106eab81a
Reviewed-on: https://go-review.googlesource.com/c/go/+/445596
Run-TryBot: Bryan Mills <bcmills@google.com>
Reviewed-by: Austin Clements <austin@google.com>
Auto-Submit: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Make linkgetlineFromPos and getFileIndexAndLine methods on Link, and
give the former a more descriptive name.
The docs are expanded to make it more clear that these are final
file/line visible in programs.
In getFileSymbolAndLine use ctxt.InnermostPos instead of ctxt.PosTable
direct, which makes it more clear that we want the semantics of
InnermostPos.
Change-Id: I7c3d344dec60407fa54b191be8a09c117cb87dd0
Reviewed-on: https://go-review.googlesource.com/c/go/+/446301
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The most important change here is to log output from the child, making
it easier to diagnose problems when the child 'go test' fails.
We can also eliminate the cmd.Wait goroutine by using an os.Pipe, whose
reader will return io.EOF when the child exits.
For #55022.
Change-Id: I1573ea444407d545bdca8525c9ff7b0a2baebf5e
Reviewed-on: https://go-review.googlesource.com/c/go/+/446300
Run-TryBot: Michael Pratt <mpratt@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The test sleeps for 1 millisecond to give the cancellation a moment
to take effect. This is flaky because the request can finish before
the cancellation of the context is seen. It's easy to verify by adding
time.Sleep(2*time.Millisecond)
after 0a6c4c8740/src/net/http/transport.go (L2619).
With this modification, the test fails about 5 times out of 10 runs.
The fix is easy. We just need to block the handler of the second
request until this request is cancelled. I have verify that the
updated test can uncover the issue fixed by CL 257818.
Fixes#55226.
Change-Id: I81575beef1a920a2ffaa5c6a5ca70a4008bd5f94
GitHub-Last-Rev: 99cb1c2eae
GitHub-Pull-Request: golang/go#56500
Reviewed-on: https://go-review.googlesource.com/c/go/+/446676
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Damien Neil <dneil@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Wasm can't handle the recusion for XML nested to depth 10,000.
Cut it off at 5,000 instead. This fixes TestCVE202228131 on trybots
in certain conditions.
Also disable TestCVE202230633 to fix 'go test -v encoding/xml' on gomotes.
Also rename errExeceededMaxUnmarshalDepth [misspelled and unwieldy]
to errUnmarshalDepth.
For #56498.
Change-Id: I7cc337ccfee251bfd9771497be0e5272737114f9
Reviewed-on: https://go-review.googlesource.com/c/go/+/446639
Auto-Submit: Russ Cox <rsc@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
This one slipped through a previous cleanup
and showed up in an allocation profile.
Change-Id: Ife447fe32797f1685c20806718193b0985b4a412
Reviewed-on: https://go-review.googlesource.com/c/go/+/446295
Reviewed-by: Robert Findley <rfindley@google.com>
Run-TryBot: Alan Donovan <adonovan@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
