Due to removal of go_tutorial, unused programs are removed.
makehtml is unnecessary (it also gives wrong messages when
the destination file doesn't exist)
progs/run now compiles all remaining programs under doc/progs.
Fixes#3076 (again)
R=golang-dev, adg
CC=golang-dev
https://golang.org/cl/5755053
This is a philosophical document. We can soup it up at a later stage,
but for now it's nice to have a URL to point to that isn't a mailing
list post.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/5676061
Set dagger looks very much like t in some fonts, so superscript it.
os/signal is no longer in exp.
R=golang-dev, adg
CC=golang-dev
https://golang.org/cl/5720049
- Define what it means for two identifiers to be unique.
- The current spec is incorrect about exported
identifiers: for instance, it excluded fields
of non-exported types of exported variables
from being exported. It is easier to leave
the detailed specification away and let the
rest of the spec govern access of exported
identifiers.
- The current spec is incorrect about qualified
identifiers: It simply required that an identifier
be exported to be valid in a qualified identifier.
However, qualified identifiers can only access
exported identifiers declared in the package
block of the imported package.
Fixes#1551.
R=r, rsc, iant, ken
CC=golang-dev
https://golang.org/cl/5711043
- more idiomatic examples of pointer types
- show use of _ in examples of function types
- remove "legal:" qualification in examples
for consistency
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/5711054
When we first wrote the method set definition, we had long
discussions about whether method sets applied to all types
or just named types, and we (or at least I) concluded that it
didn't matter: the two were equivalent points of view, because
the only way to introduce a new method was to write a method
function, which requires a named receiver type.
However, the addition of embedded types changed this.
Embedding can introduce a method without writing an explicit
method function, as in:
var x struct {
sync.Mutex
}
var px *struct {
sync.Mutex
}
var _, _ sync.Locker = &x, px
The edits in this CL make clear that both &x and px satisfy
sync.Locker. Today, gccgo already works this way; 6g does not.
R=golang-dev, gri, iant, r
CC=golang-dev
https://golang.org/cl/5702062
Change #foo to div#foo to avoid selecting headings
with anchor foo, such as <h1 id="foo">.
(A more extensive change would be to use class
selectors for styling. Perhaps this is better, since id:s
should be unique within a document according to
http://www.w3.org/TR/CSS2/selector.html#id-selectors)
R=golang-dev, gri, adg
CC=golang-dev
https://golang.org/cl/5702044
This distills the motivational discussion and makes it the introduction to the release notes.
After this lands, I'll expand the discussion of the major changes to include more background.
Updates #3086.
R=golang-dev, gri, rsc
CC=golang-dev
https://golang.org/cl/5698057
Also reformat the "go fix" references to make them look better by using the non-CW space.
Fixes#3087.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/5695057
Or, depending on your point of view, make the
comparisons satisfy any surrounding boolean type.
Also, fix a few foo_bar -> fooBar in code fragments.
Fixes#2561.
R=golang-dev, r, bradfitz, gri, iant, kevlar
CC=golang-dev
https://golang.org/cl/5671096
They are portability problems and the options are almost always zero in practice anyway.
R=golang-dev, dsymonds, r, bradfitz
CC=golang-dev
https://golang.org/cl/5688046
* disallow embedding of C type (Fixes issue 2552)
* detect 0-length array (Fixes issue 2806)
* use typedefs when possible, to avoid attribute((unavailable)) (Fixes issue 2888)
* print Go types constructed from C types using original C types (Fixes issue 2612)
This fix changes _cgo_export.h to repeat the preamble from import "C".
Otherwise the fix to issue 2612 is impossible, since it cannot refer to
types that have not been defined. If people are using //export and
putting non-header information in the preamble, they will need to
refactor their code.
R=golang-dev, r, r
CC=golang-dev
https://golang.org/cl/5672080
The set of errors forwarded by the os package varied with system and
was therefore non-portable.
Three helpers added for portable error checking: IsExist, IsNotExist, and IsPermission.
One or two more may need to come, but let's keep the set very small to discourage
thinking about errors that way.
R=mikioh.mikioh, gustavo, r, rsc
CC=golang-dev
https://golang.org/cl/5672047
When I build it, I got:
/home/njubee/work/golang/doc/codewalk/markov.go:124: undefined: time.Nanoseconds
time.Nanoseconds() does not exist now, use time.Now().UnixNano() instead
R=golang-dev, adg
CC=golang-dev
https://golang.org/cl/5668044
hg massively messed up a simple merge for 9d7addec2635 in what I can
only imagine was a public service announcement that everyone should
use git.
R=golang-dev
CC=golang-dev
https://golang.org/cl/5668043
This was an implementation detail that snuck into the public interface.
*Writer.Create gives you an io.Writer, the *Writer itself was never
meant to be written to.
R=golang-dev, dsymonds, r
CC=golang-dev
https://golang.org/cl/5654076
Drop reference to "machine type." Specify that integer
overflow must be an error. Drop requirement that exponent
must be 128 bits--that's a lot. Clarify that floating point
expressions may be rounded, including intermediate values.
This is a reworking of https://golang.org/cl/5577068/ .
Fixes#2789.
R=r, rsc, r, gri, ken, ken, iant
CC=golang-dev, remyoudompheng
https://golang.org/cl/5655049
Restore package os/signal, with new API:
Notify replaces Incoming, allowing clients
to ask for certain signals only. Also, signals
go to everyone who asks, not just one client.
This could plausibly move into package os now
that there are no magic side effects as a result
of the import.
Update runtime for new API: move common Unix
signal handling code into signal_unix.c.
(It's so easy to do this now that we don't have
to edit Makefiles!)
Tested on darwin,linux 386,amd64.
Fixes#1266.
R=r, dsymonds, bradfitz, iant, borman
CC=golang-dev
https://golang.org/cl/3749041
1) Remove the Reset() member in crypto/aes and crypto/des (and
document the change).
2) Turn several empty error structures into vars. Any remaining error
structures are either non-empty, or will probably become so in the
future.
3) Implement SetWriteDeadline for TLS sockets. At the moment, the TLS
status cannot be reused after a Write error, which is probably fine
for most uses.
4) Make crypto/aes and crypto/des return a cipher.Block.
R=rsc, r
CC=golang-dev
https://golang.org/cl/5625045
This is not the finished product,
but a good checkpoint from which to
proceed with further development.
R=golang-dev, dsymonds, r
CC=golang-dev
https://golang.org/cl/5571061
Fixes#2776.
There was a previous attempt at CL 5592043 but that
seems to have stalled. This one is simpler, and more up to date
(correct handling of spdy, for example).
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/5645091
The paragraph describing the ellipses presents the horizontal ellipsis
in two different fonts and at least on my screen they look too different.
Switch to a consistent rendering.
Of small steps are great journeys undertaken.
R=golang-dev, rsc, dsymonds, gri
CC=golang-dev
https://golang.org/cl/5650055
If a printer is configured with the SourcePos mode
set, it will emit //-line comments as necessary to
ensure that the result - if reparsed - reflects the
original source position information.
This change required a bit of reworking of the
output section in printer.go. Specifically:
- Introduced new Config mode 'SourcePos'.
- Introduced new position 'out' which tracks the
position of the generated output if it were read
in again. If there is a discrepancy between out
and the current AST/source position, a //line
comment is emitted to correct for it.
- Lazy emission of indentation so that //line
comments can be placed correctly. As a result,
the trimmer will have to do less work.
- Merged writeItem into writeString.
- Merged writeByteN into writeByte.
- Use a []byte instead of a byte.Buffer both in the
printer and in the trimmer (eliminates dependency).
Also: introduced explicit printer.Mode type (in
sync w/ parser.Mode, scanner.Mode, etc.)
Runs all tests. Applied gofmt to src, misc w/o changes.
Fixes#1047.
Fixes#2697.
R=rsc, rsc
CC=golang-dev
https://golang.org/cl/5643066
(*Writer, error) if they take a compression level, and *Writer otherwise.
Rename gzip's Compressor and Decompressor to Writer and Reader, similar to
flate and zlib.
Clarify commentary when writing gzip metadata that is not representable
as Latin-1, and fix io.EOF comment bug.
Also refactor gzip_test to be more straightforward.
Fixes#2839.
R=rsc, r, rsc, bradfitz
CC=golang-dev
https://golang.org/cl/5639057
Delete O_NDELAY, O_NONBLOCK, O_NOCTTY, O_ASYNC.
Clean up some docs.
Rename ShellExpand -> ExpandEnv.
Make NewFile take a uintptr; change File.Fd to return one.
(for API compatibility between Unix and Windows)
Fixes#2947
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/5655045
Other wordings are possible but defining this as one
of the ways to proceed means we don't have to add
language about this to the description of select.
Fixes#2825.
R=golang-dev, gri, r
CC=golang-dev
https://golang.org/cl/5643062
Issue 2856 asks for a rename of a few methods to a
more idiomatic Go style. This is a very early API
that evolved organically throughout the years.
Together with the fact that ErrorVectors were embedded
in other data structures (e.g. Parser), just renaming
methods (e.g. GetError -> Error) would lead to undesired
behavior (e.g., Parser would act like an Error). Instead,
cleaned up API a bit more:
- removed ErrorVector in favor of ErrorList (already
present)
- simplified Scanner.Init by making the error handler a
function instead of requiring an ErrorHandler implementation
- adjusted helper functions accordingly
- updated Go 1 doc
Fixes#2856.
R=rsc
CC=golang-dev
https://golang.org/cl/5624047
Otherwise, the registration semantics are
init-order-dependent, which I was trying very hard
to avoid in the API. This may break broken programs.
Fixes#2900.
R=golang-dev, r, bradfitz, dsymonds, balasanjay, kevlar
CC=golang-dev
https://golang.org/cl/5644051
The function has a bizarre signature: it was the only public function there
that exposed the reflect package. Also, its definition is peculiar and hard to
explain. It doesn't merit being exported.
This is an API change but really, it should never have been exported and
it's certain very few programs will depend on it: it's too weird.
Fixes#2846.
R=golang-dev, gri, bradfitz
CC=golang-dev
https://golang.org/cl/5639054
It complicates the interface unnecessarily.
Document this in go1.html.
Also update the go/doc Makefile.
Fixes#2836.
R=golang-dev, gri, bradfitz
CC=golang-dev
https://golang.org/cl/5642054
Specifically, remove simply where it is claiming that the
code or the action to be carried out is simple, since the
reader might disagree.
R=golang-dev, bradfitz, gri
CC=golang-dev
https://golang.org/cl/5637048
This CL introduces new function ListenMulticastUDP to fix
multicast UDP listening across multiple listeners issue,
to replace old multicast methods JoinGroup and LeaveGroup
on UDPConn.
This CL also enables multicast testing by default.
Fixes#2730.
R=rsc, paul.a.lalonde, fullung, devon.odell
CC=golang-dev
https://golang.org/cl/5562048
Separating Method from Func made the code only more complicated
without adding much to the useability/readability of the API.
Reverted to where it was, but leaving the new method-specific
fields Orig and Level.
Former clients (godoc) of doc.Method only used the Func fields;
and because Func was embedded, no changes are needed with respect
to the removal of Method.
Changed type of Func.Recv from ast.Expr to string. This was a
long-standing TODO. Also implemented Func.Orig field (another TODO).
No further go/doc API changes are expected for Go 1.
R=rsc, r, r
CC=golang-dev
https://golang.org/cl/5577043
