We seem to be leaking cache entries. A simple status page will help us
confirm that.
Change-Id: I485bfff6ebfb5d30655554487583e15a3f49f9a4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/217597
Run-TryBot: Heschi Kreinick <heschi@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
source.Identifier previously was used for references and rename, so it
needed to take a package policy. Now, it's only used for definition and
hover, so it should always be the narrowest package handle. We can use
this fact to determine if the identifier is located in its declaring
package, and if that package is a test variant, we don't link to the
documentation on pkg.go.dev, since it doesn't exist.
Change-Id: I5686828858a3feafb8ff2e4c5964b562f66db9fa
Reviewed-on: https://go-review.googlesource.com/c/tools/+/217137
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change will skip packages.load calls when a go.mod file changes if that go.mod file is not the go.mod file associated with the view.
Change-Id: I23a214a89203dd58417f3e2f69725ce3b669a5ca
Reviewed-on: https://go-review.googlesource.com/c/tools/+/217238
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When we stopped returning an error from awaitInitialized, we didn't
handle this case in LookupBuiltin.
Fixesgolang/go#36975.
Change-Id: I9668a7148f60ca1f9cad953d46caf6ec5500541e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/217399
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
In preparation for some meaningful changes, rework a few things:
- rename "fix" to "fixAST"
- separate "parseExpr" into "parseStmt" and "parseExpr"
- pull out "walkASTWithParent" function
Change-Id: If6c8a249441feda95704f37bc9bde3ef2b64cbd2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/216481
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Env is used in the debug template, but not available.
Change-Id: I8e270464aecd927bc553bfbf9e7c85a477833890
Reviewed-on: https://go-review.googlesource.com/c/tools/+/217085
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change adds a check inside of the types.ImporterFunc to see if the context has been cancelled.
Updates golang/go#34683
Change-Id: I0f12da0f8158ecda0eec00150ed6ff772c2f89c3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/217257
Run-TryBot: Rohan Challa <rohan@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
DefaultOptions was a value type, but held map values. This CL changes it
to a function that returns an Options value that has new instances of
all reference types. It would be better if this function returned a
pointer, but that change ended up being too large. I will need to
refactor handling of options later anyway, in order to support sessions
with differing options for golang.org/issues/34111.
This fixes a race in internal/lsp/tests: internal/hooks/analysis.go
mutates the Analyzers map.
See for example the trybots result at:
https://storage.googleapis.com/go-build-log/0d34f5f0/linux-amd64-race_4ecdf9c8.log
Change-Id: I41be450b590a3f3104ac9a1cb9cb312ea3ff7ff4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/217077
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
We can assume that any package we load directly will be a package in the
workspace, so it's reasonable to set workspace packages at that point.
We're guaranteed not to directly load dependencies, or we may end up
with indirect dependencies in the go.mod file.
Change-Id: I5d406e54da2bc3278b139c75b436d111b5564418
Reviewed-on: https://go-review.googlesource.com/c/tools/+/216726
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Some housekeeping. The shouldLoad function doesn't actually make sense
in load.go.
Change-Id: Idcfade57ab853cdae809c688fa21026a0a432c60
Reviewed-on: https://go-review.googlesource.com/c/tools/+/216727
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Any context that came in through the lsp protocol package will work, live or dead.
Change-Id: I7566ec07b09e1c8e54a5255ebda8553843cfe974
Reviewed-on: https://go-review.googlesource.com/c/tools/+/216846
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The nilness analysis gives us diagnostics with invalid start Pos. We can
just ignore those and log them.
Add a missing error check while I'm in here.
Change-Id: I4a205f253a9e47ec1513ff6299479f52e414a48c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/216724
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
If an orphaned file is used to recover a workspace package, we should
remove the initialization error and treat the view as correctly
initialized.
Also, stop caching metadata for packages with no files. We have no way
to invalidate it, and it's useless, so just re-load those files as
needed.
Fixesgolang/go#36795.
Fixesgolang/go#36671.
Fixesgolang/go#36772.
Change-Id: I0aee5a43401517b6073d27136cca533160effef2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/216637
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is just to ensure that arguments are always ordered when passed to
packages.Load.
Change-Id: I2c74673eff31efc31854dc0d306809890f633789
Reviewed-on: https://go-review.googlesource.com/c/tools/+/216600
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The go command gets mad if go.mod has changed since it started, e.g.
because a new dependency was added by a concurrent go list call. Retry
loads if they hit a concurrency problem. See the comment for more
details.
Testing this is awkward. I ran a background script that constantly
modified the go.mod file and observed that gopls waited until it was
killed and then recovered.
Updates golang/go#36772.
Change-Id: I5636c99a5a94b415c4a6fbb71869b07e31d3fed0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/216543
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change sets up the infrastructure to surface the dependencies that are missing in a go.mod file. In a follow up CL, we will use these to add diagnostics to the imports of .go files telling the user to add the dependency to their go.mod file.
Updates golang/go#31999
Change-Id: I697df0d7c6eabfdc2f0c75cb36aa35794647fd13
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214700
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We were reloading all known files, which resulted in modifications to
user's go.mod files.
Change-Id: I14e86af896d1e75f3fdaaa00b9af8d7fb1d1e9e5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/216542
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Mostly because I find it very annoying.
But I imagine lots of people shadow variables intentionally, and it's
very noisy.
Also, fix an error caught by the nilness check while I'm thinkng about
analyses.
Change-Id: I1867c8613194028815666efd879899bb5065c9d7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/216541
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The go/packages workaround to hide errors for overlay packages doesn't
seem to work well. It's easier to just hide list errors in gopls
diagnostics unless the package genuinely failed to type-check. Check if
the package has missing dependencies as an approximation of if it is
well-typed.
This required some additional special casing for the import cycle error
detection, which now causes them to have duplicate diagnostics. It's a
rare enough case that this doesn't concern me, but we should clean this
up at some point.
Fixesgolang/go#36754.
Change-Id: If12c92fb9a0e0b69b711ae9a509ecb1b2a32255c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/216310
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Now that we are reloading metadata for workspace packages by package
path, ad-hoc packages get their metadata reloaded incorrectly. If an
ad-hoc package has no metadata, reload it by reloading the entire
directory.
Fixesgolang/go#36753
Change-Id: Ie440f6f76a220009d487b7ceadcf40594643e969
Reviewed-on: https://go-review.googlesource.com/c/tools/+/216307
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The view should really be able to determine if it's valid, not the
source package. Expand moduleInformation to be buildInfo, and use it to
collect additional details.
Use this information to determine if we should load a view's
subdirectories as part of the initial workspace load. If a module is
initialized, we will recreate the view, so we should be fine. Not sure
what will happen if the directory is moved into GOPATH, but that should
be less of a concern (I think).
Fixesgolang/go#35818.
Change-Id: Ic8ceedd37386b1653b8965c64d9ba8953778ab78
Reviewed-on: https://go-review.googlesource.com/c/tools/+/216143
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
go/packages overlay handling only really works for contains queries
(file=), so our approach of reloading packages by package path (for
workspace packages) wasn't handling newly created packages that need to
be handled through overlays. Workaround this by reloading metadata for
individual files that are missing it by running extra contains queries
(only after the first metadata load for package paths). Be careful not
to reload the same file multiple times if the first load did not succeed.
Somewhat related, clear out `go list` errors in packages that go
through overlay handling, since they will often be rendered irrelevant.
I'm not sure if this is the right move, but if it's not, then we will
have to do extra work to disregard those errors in gopls.
Fixesgolang/go#36661.
Fixesgolang/go#36635.
Change-Id: Ib83cffcdf8a3e07da0f30e734d5e2c89691e1aba
Reviewed-on: https://go-review.googlesource.com/c/tools/+/216141
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This is a pure move with no code changes.
Rename parse_mod.go to mod_tidy.go since it's changed a bit.
Move the modfile.go functions into view.go since (1) Heschi doesn't
like spreading methods into multiple files and (2) it only has 2
functions in it anyway.
Change-Id: If0d7e4b50ac22c57302d90d68c2181dbb3ca8b87
Reviewed-on: https://go-review.googlesource.com/c/tools/+/216142
Reviewed-by: Rohan Challa <rohan@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Missed a pretty key case in CL 216138. Also, I accidentally made it pass
-modfile even when it's not supported.
Change-Id: Ia0d04be7e82b77e1ec3f57ee2fee04e8c14a7c90
Reviewed-on: https://go-review.googlesource.com/c/tools/+/216140
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
We treat package IDs and import paths as semi-interchangeable, which is
wrong when GOPATH vendoring is in use. The only place it hurts us is
during import resolution, which is fixed here. We should always have the
package loaded, so it's just a matter of finding it by searching each
possible vendor location.
Fixesgolang/go#36155.
Change-Id: If789092d16fa3d3294b6d8a2bcb980264506c161
Reviewed-on: https://go-review.googlesource.com/c/tools/+/215904
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
view.ModFiles used to not return the real mod file, even if one existed.
Now, we construct view.moduleInformation even if -modfile isn't
supported.
Change-Id: I03faf2ea521c2f404d4e1ba47f71ae48f3cb08d9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/216138
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Rohan Challa <rohan@golang.org>
If the initial workspace load fails (due to a lack of a go.mod file or
an invalid go.mod file), we should try to re-load as changes to the
go.mod come in. Rather than retrying within the view, we just drop the
view entirely and try to recreate it. This shouldn't lead to any
noticeable lag, as anything that has been cached can still be reused.
Fixesgolang/go#36531
Change-Id: I6e157075e8b3665f0ceef35e051e56ac3c29f286
Reviewed-on: https://go-review.googlesource.com/c/tools/+/216037
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Address a lingering TODO. A FileHandle read should return errors if the
file has been modified on disk while in use.
Change-Id: I540de9bef575a9ca838f49500665a24b05b4f54c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/215981
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rohan Challa <rohan@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Remove the special handling for go.mod file saves. This was only really
added to be extra careful, but our cancellation logic should cope with
this.
Fixesgolang/go#31553
Change-Id: I0a69bcdeaf6369697e79aba4689a7b714484ccc2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/215908
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
We don't yet propagate these batched changes in text_synchronization.go,
but this is the next step in moving towards a batched approach.
Updates golang/go#31553
Change-Id: Id6496af9d5422cc50ccb995f81c71ec1886f965a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/215907
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Caught a number of unused parameters along the way. Hopefully we can
eliminate the containsFileSave boolean soon, since it's a bit annoying
to have to send that through.
Updates golang/go#31553.
Change-Id: I94319d902d329c84cb1c0676322ac04541ad53a0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/215906
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change uses the wonderful functions from x/mod to get the proper edits for the quick fixes on a go.mod diagnostic. It also creates a goModData structure to hold the data thats gets passed into the various parse functions, this will help reduce the large function prototypes that can occur when we decompose the logic. It also refactors the Modfiles() function to return span.URIs vs FileHandles.
Change-Id: Ifa0896442650f2ddbd8fe98d8f231a9e94c3d042
Reviewed-on: https://go-review.googlesource.com/c/tools/+/215097
Run-TryBot: Rohan Challa <rohan@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change adds a buildflags variable to the ProcessEnv inside internal/imports. When you run go list with GO111MODULE=on to get information about the package you are in, it will add a go directive to your go.mod file if there is not one. With the tempModfile=on flag, there should be no changes to a user's go.mod file.
Updates golang/go#36247
Change-Id: I817e4c46b4f433d0665fcb7585fcdf4f87049a38
Reviewed-on: https://go-review.googlesource.com/c/tools/+/215978
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
As usual, in debugging the creation of a new file with gopls, I've
encountered a go/packages overlay bug. The issue is:
A file b/b.go with package name "b" exists on disk. A package
b/b_test.go with no content exists on disk. There is an overlay for
b/b_test.go that contains the package name "b". Running packages.Load
for file=b/b_test.go will result in a failure to load package b
[b.test]. This change adds this test to the go/packages tests.
This case is fixed by restricting the fallback logic in
runContainsQueries. We only attempt to construct an ad-hoc package if
the original package was returned with no GoFiles.
Also, a minor change to the gopls error parsing code that fixes a case
in which diagnostics were being sent without corresponding files.
Updates golang/go#36635.
Change-Id: I38680a2cc65ae9c3252294db6b942d031189faf5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/215743
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
This is the first in a series of changes to batch file changes. First,
we have to support invalidating a snaphot with multiple files.
Updates golang/go#31553
Change-Id: I7cd83d9280e3274549a72393bb9010c47eb5dd1e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/215902
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
The passed-in Context is not used, and creates the illusion of a startup
dependency problem: existing code is careful to pass in the context
containing the correct Client instance.
This allows passing in a source.Session, rather than a source.Cache,
into lsp server constructors.
Updates golang/go#34111
Change-Id: I081ad6fa800b846b63e04d7164577e3a32966704
Reviewed-on: https://go-review.googlesource.com/c/tools/+/215740
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Apparently, the convention is to name something "Locked" if the
implementation is mutex is already locked when the function is called.
Turns out there were no callers of getFileLocked anyway, so just delete
that function and rename to getFile.
Change-Id: Ia7a9a620c3eb8eb0ce6b0a44ddb2ed62a604484d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/215737
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change creates the infrastructure for caching diagnostics. Right now it uses a naive key of the entire snapshot which does not really add any benefit from using the cache. It also moves some code from inside the internal/lsp/mod to internal/lsp/cache.
Updates golang/go#31999
Change-Id: I599ad281baa062448d33ca0ea88ae6e09e10d73e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/215021
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The modfiles function only works with Go 1.14. When it is enabled,
it reenters the view, causing a deadlock. Stop using it, and move the
process env under a separate lock so to break the deadlock.
Change-Id: I34c528c2be1f32c06b423ead44e90155f60c2214
Reviewed-on: https://go-review.googlesource.com/c/tools/+/215679
Run-TryBot: Heschi Kreinick <heschi@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
There's no need to do this more than once per view.
Change-Id: I3160adc602764204155dd0e506fd554aeb55d639
Reviewed-on: https://go-review.googlesource.com/c/tools/+/215321
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
We used to read the go.mod file information out of the imports.Resolver.
Now that gopls tracks go.mod itself, we can use that instead. This is a
slight regression, in that go.mods in replace targets will no longer be
watched, but I don't think that's too important.
This allows us to stop reading the ModuleResolver's internals, which
were not sufficiently locked.
Updates golang/go#36605.
Change-Id: I42939e0248cba1f6b3850a003de67fcc11ab10b1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/215319
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Previously, we were only invalidating packages in directories if we
didn't have a file handle. We should also invalidate if we have an
unparseable file handle - that is, a file with no content or no package
name.
Fixesgolang/go#36608.
Change-Id: Ia12fad962c06ddeeac382185d3220961f5c584e0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/215318
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Invalidating metadata for reverse dependencies isn't necessary, except
for in the case of test variants and x_tests.
An example:
The only way to reload the metadata for
"golang.org/x/tools/internal/lsp/cache
[golang.org/x/tools/internal/lsp/source.test]" is by reloading
"golang.org/x/tools/internal/lsp/source" with "[-test -deps]". That
means we have to invalidate the metadata for that
"golang.org/x/tools/internal/lsp/source_test" when we invalidating
"golang.org/x/tools/internal/lsp/cache".
Fixesgolang/go#36165
Change-Id: Iff0e03a7a46158fbdafaffa091f90ca434700a97
Reviewed-on: https://go-review.googlesource.com/c/tools/+/215117
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change eliminates our need to guess what the package under test is
in gopls, since `go list` always knows the answer.
Change-Id: I16e482ed3b452bd57cd478b1f8280fcea56474d3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/215020
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Now that we can detach scans, it's easy to kick off a background refresh
that doesn't block the user. Performance may be a bit worse until the
scan finishes, but that's the price we pay for freshness.
Adaptively rate-limit the refresh rate so that we don't turn the user's
computer into a hot plate.
Change-Id: Icbe8f384f44a219b57465da22d9becc19001eab8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212022
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change moves to our ultimate approach of diagnostics the snapshot
on every file change, instead of carefully picking which files and
packages to diagnose. Analyses are shown for packages whose files are
open in the editor. Reverse dependencies are no longer needed for
source.Diagnostics because they will be invalidated when the snapshot is
cloned, so diagnosing the entire snapshot will bring them up to date.
This even works for go.mod files because all of workspace-level `go list`s
will be canceled as the user types, and then we trigger an uncancellable
go/packages.Load when the user saves. There is still room for improvement
here, but it will require much more careful invalidation of metadata for
go.mod files.
Change-Id: Id068505634b5e701c6f861a61b09a4c6704c565f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214419
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change combines the two packages.Load calls that happen on view
creation. Builtins can be loaded along with the rest of the workspace.
To avoid race conditions, create a builtinPackageHandle type for
builtins and use it to create the data.
Updates golang/go#36531
Change-Id: I7aa342c463a0b7718e1ad5fee507622310d8443b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214877
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Package handles should be cached on the snapshot as part of the initial
workspace load, otherwise this cached data will be repeatedly lost and
reconstructed during tests and regular execution.
Fixesgolang/go#36556
Change-Id: If7676685db17519c998b857a812467c7f3cc6003
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214799
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change moves as much view initialization code into the
initialization function, instead of having it happen on view create.
Also, the `go env` variables that are collected at inconsistent times
are all collected on view creation. That is sufficient, since the view
is recreated if the environment changes.
I had originally hoped that the initial call to `go env` and the
-modfile detection could become part of this parallel initialization as
well, but you can't create a *packages.Config until the temporary
modfile has been set up, so it still makes sense to do that on view
create. This is, however, the reasoning behind the refactorings in
the -modfile detection in this CL. The main changes are a few renamings
and a split between snapshot.ModFiles and view.modFiles to maximize the
amount of work done in the view. I changed view.modfiles to moduleInformation
because I thought we might want to store additional information there at some
point. Rohan, please let me know if you disagree with any of the changes I made,
and I can revert them.
Fixesgolang/go#36487
Change-Id: I504db5a4f41b79bee99ebd391e32e7b520a19569
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214417
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rohan Challa <rohan@golang.org>
In golang.org/cl/209419, CheckPackageHandle was renamed to
PackageHandle, but a number of references to CheckPackageHandle remained
in function names and comments.
This CL cleans up most of these, though there was at least one case
(internal/lsp/cache.checkPackageKey) where the obvious renaming
conflicted with another function, so I skipped it.
Change-Id: I517324279ff05bd5b1cab4eeb212a0090ca3e3ad
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214800
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change adds a protocol.ColumnMapper when parsing go.mod files. This will prevent us from having to worry about line and column offsets, specifically when converting from the x/mod/modfile position to a span.Span.
Updates golang/go#31999
Change-Id: Iacdfb42d61dfea9b5f70325cf5a87c9575f8f345
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214699
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Reloading metadata on demand fails for some our test packages,
because I don't understand how to construct arguments to commands.
Change-Id: Ib18454a09772e854a612528af898d06ce14133c2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214717
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change modifies the source.Error type to have a URI instead of a
FileIdentity associated with an error.
Change-Id: I8056bdc881dd3ec43af02cca1366815c0bc6dfcd
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214586
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change adds the -e flag to ensure that we get the release tags when we are checking if the go version is at least 1.14. This also adjusts the check to be more lenient when it comes to processing the output of the version check.
This also fixes another issue where if the version is not 1.14 we were publishing empty diagnostics for an empty uri. This arose because we did not check if there was a valid go.mod file before we published the reports.
Fixesgolang/go#36488
Change-Id: I5a8057c153f49167811e2bf8e4ade52bf6171d6b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214290
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change removes functions from the snapshot that return package IDs.
We prefer PackageHandles, since getting PackageHandles in a granular
fashion is not effective and causes us to spawn many `go list`
processes. By only ever returning PackageHandles, we can batch metadata
reloads for workspace packages. This enables us to add a check to
confirm that the snapshot is in a good state before returning important
data, like reverse dependencies and workspace package handles.
Change-Id: Icffc8d8e0449864f207c15aa211e84cb158c163f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214383
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This is the beginning of the CLs to refactor the file watching code with
the normal text synchronization code. This hasn't yet been tested other
than with some minimal local testing, so follow-up CLs will be needed.
Updates golang/go#31553
Change-Id: Id081ecc59dd2903057164171bd95f0dc07baa5f1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214277
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
There is no reason for these functions to live on the view. They make
more sense as unexported functions in internal/lsp/source.
Initially, I had to propagate contexts through a lot of functions in
internal/lsp/source, but instead I removed the unused contexts forom
snapshot.GetFile.
Change-Id: I8323419d0356feb2010091fe8d3ed35e511f801a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214384
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change will surface errors that come from the mod package. It will handle incorrect usages, invalid directives, and other errors that occur when parsing go.mod files.
Updates golang/go#31999
Change-Id: Icd817c02a4b656b2a71914ee60be4dbe2bea062d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/213779
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change moves the initialization of the view into the view's
creation, instead of forcing the tests to call WorkspacePackageIDs to
initialize.
Change-Id: Iccea820ec268b1851d58821481d92c7a3d4772c3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214279
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Opening a mod file is not sufficient cause to invalidate in the
workspace, so don't.
Change-Id: I2b7703008528e4469be312165deb17fe6856fd74
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214259
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Minimize the issues at master by not running workspace-level diagnostics
on mod file changes. Once the initial workspace load stabilizes we will
be able to go back to that approach.
Also, a couple of minor changes along the way while debugging.
Change-Id: Ib3510e15171326a1b89f08ef0031a3ef7d9ac4ec
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214257
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
A test variant for a package can only be reloaded by running go/packages
on the non-test variants import path with the -test flag. We need to
cache this import path in order to be able to reload a test package
on-demand.
Also, always ignore test main packages by detecting them in the
metadata.
Fixesgolang/go#36473
Change-Id: I6e5a61c8e73689212303ae09fa3aed4a2ee8762a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/213660
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change consolidates the FileKind into only the FileHandle.
Previously, it had been set in multiple places, which required users to
pass in a FileKind when fetching a file. This resulted in confusion,
particularly in places when users did not have access to the file kind.
Change-Id: I9e07d7320c46a21d453ffe108d1431a615706a71
Reviewed-on: https://go-review.googlesource.com/c/tools/+/213459
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This is the first step to surfacing potential fixes and suggestions to a user's go.mod file. Specifically, it will show a warning if you have a dependency that is not used, or if a dependency is declared as indirect when it should be direct and vice versa.
This CL adds functionality for version of Go that are >= 1.14.
Updates golang/go#31999
Change-Id: Id60fa0ee201dcd843f62e2659dda8e795bd671db
Reviewed-on: https://go-review.googlesource.com/c/tools/+/211937
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
When the tempModfile flag was enabled, there would be some go
commands that would run without the -modfile flag. This change adds
the config's buildFlags to the invokeGo command in go/packages and
updates how we are checking if the go version is 1.14 within the
modfileFlagExists function.
Fixesgolang/go#36247
Change-Id: I436666c3fcad33e85ba00aec5f227fe4a0e638b8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212477
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The initial workspace load was happening when a view was created, in serial.
It should really just be kicked off in a separate goroutine once we create a
new view. Implementing this change required some other significant changes,
particularly the additional work being done by the WorkspacePackageIDs
method.
Some other changes had to be made while debugging. In particular, the
modification to the circular dependencies test was a consequence of
golang/go#36265.
Change-Id: I97586c9574f6c4106172d7983e4c6fad412e6aa1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212102
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Test variants and test mains can result in multiple packages being
loaded for a single ID. Handle this case in the PackageHandle function
instead of returning an error.
Change-Id: Ic0024c5bded162a3e78a9cdcb9566449f3683e35
Reviewed-on: https://go-review.googlesource.com/c/tools/+/213457
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When dealing with cgo files, we need to pass a Mapper for the authored
file. I got most of the sites in CL 208501, but missed this one.
I was nervous about starting to propagate errors, but all the tests
passed, so shrug.
Change-Id: I7505e670e9c01d719c72c3f99d01c8153c3d2ff5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212862
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
No point in constructing the defaults in three places.
Change-Id: I2b0776910a933a7250245bd82dc27e63c34df18a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212632
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We have multiple use cases for scanning: goimports, import completion,
and unimported completions. All three need slightly different features,
and the latter have very different performance considerations. Scanning
everything all at once and returning it was not good enough for them.
Instead, design the API as a series of callbacks for each
directory/package: first we discover its existence, then we load its
package name, then we load its exports. At each step the caller can
choose whether to proceed with the package. Import completion can stop
before loading exports, goimports can apply its directory name
heuristics, and in the future we'll be able to stop the scan short once
we've found all the results we want for completions.
I don't intend any significant changes here but there may be some little
ones around the edges.
Change-Id: I39c3aa08cc0e4793c280242c342770f62e101364
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212631
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The metadata for the workspace packages may not be available when we
need it, so we should allow loading a single package ID. This can be
improved in follow-up CLs by consolidating the individual IDs into one
call to packages.Load. Some adjustments from CL 212102 were split out
into this CL.
Change-Id: I173a79a3cb136530bc99d093f1c2be189eac8ce2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212628
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This commit will delete the temporary go.mod file that is attached
to a view when the session is shutdown.
Updates golang/go#31999
Change-Id: I0f6b0663b0a814ce45d9b12468669f415f8c36aa
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212479
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
CL 212037 introduced a bug with saving overlays. Since VS Code sends nil
contents for a file on save, we were deleting overlay contents on save.
This resulted in very strange behavior.
Also rename overlay.data to overlay.text to match variable names.
Fixesgolang/go#36224
Change-Id: I7f2d12e369aa7f6daa2c9f36c33468ec6bf61930
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212199
Reviewed-by: Michael Matloob <matloob@golang.org>
In one of my previous refactoring changes, I lost the fact that the
context should be detached before invalidating a file's contents. If
this function is canceled, we will be in a bad state.
Also, small change to return ctx.Err() instead of a custom error message
from (*packageHandle).check.
Change-Id: I19e513e09e438feee105fdd89cb7364a0c3c5e7f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212104
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Now that `go list` errors are sufficient for us to determine a circular
dependency, we don't need to cache errors on dependency packages.
Change-Id: I0633aeb356f93d21afed3371d61d7eae7de255ac
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212197
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rohan Challa <rohan@golang.org>
Reviewed-by: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change merges the small helper functions that modified overlays
into a single function and removes the openFiles sync.Map in the view.
Change-Id: Id94c7d86228c9628b7373fab0030ad0c8018dda5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212037
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change eliminates the extra step of calling GetFile on the view and
getting the FileHandle from the snapshot. It also eliminiates the
redundant source.File type. Follow up changes will clean up the file
kind handling, since it still exists on the fileBase type.
Change-Id: I635ab8632821b36e062be5151eaab425a5698f60
Reviewed-on: https://go-review.googlesource.com/c/tools/+/211778
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
On startup gopls runs go/packages over the entire workspace. The log
message in question outputs each package found along with all the
package's filenames. Obviously in a large project this produces an
incredible amount of output. Fix by putting the log message behind the
"verboseOutput" flag when invoking go/packages in the "dir/..." mode.
I also added the go/packages "query" string to the
once-per-go-packages-call log message so it is more useful.
Change-Id: I651419e34a855325056bca6720eda8671f7d5fa8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/210739
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This CL adds a "disableTempModfile" boolean that can be turned on or off.
While we are adding support for go.mod files in gopls, this flag will allow
users to opt out of using the -modfile flag that is enabled in Go 1.14. This
flag might be removed at a future point, the decision still needs to be made.
Updates golang/go#31999
Change-Id: Ic90229333e988fcc6d461ab1ee47bce1114bd965
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212139
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
It wasn't infinite, but gopls would sit at 100% cpu for ~25 seconds
whenever I made a change to a package imported by essentially
everything in my project.
Change-Id: Ifa253a4de06897260e0791888284527258e8de48
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212000
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
The situation in golang/go#35638 was as follows:
didOpen main.go creates a snapshot that knows main.go is in package
"mod.com".
didChange main.go creates a snapshot. When a file changes, we discard
its contents by leaving the file handle out of the "files" map.
didOpen const.go creates a snapshot, and attempts to invalidate the
metadata for packages in the same directory.
The way we detect packages in the same directory is by iterating through
the files in the snapshot. But we threw away the only file in "mod.com"
in step 2 when its contents changed. If a diagnostics run happened to
get in between the two steps, it would re-load main.go and the bug would
go away. If not, step 3 would find no files and fail to invalidate
"mod.com".
The best way to fix this is to insert the new file handle eagerly during
cloning. That way there's no confusion.
Fixesgolang/go#35638.
Change-Id: I340bd28a96ad7b4cc912032065f3c2732c380bb2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/211578
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Eliminate the file watcher, since it led to a lot of confusion and
difficulty reasoning about the flow of a file action. This change splits
a file invalidation into the two logical steps - 1) things that affect
the overlay, and 2) things that affect the view. It is based on top of
CL 211757, so the diffs will look better once that CL is merged.
Change-Id: I277475569b61f3c80feaa6b6fe457b4bace82e35
Reviewed-on: https://go-review.googlesource.com/c/tools/+/211777
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change has no code modifications. Just move the handling for
overlays and debugging into separate files to make them easier to find.
Also, add some missing copyrights.
Change-Id: I7256f704c017457fa3418818d03f89f061af6fc9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/211757
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
In the upcoming Go 1.14 release, there is an introduction of the -modfile
flag which allows a user to run a go command but choose where to direct the
go.mod file updates. The information about this can be found here: golang/go#34506.
This change starts setting up the infrastructure to handle the seperate modfile
rather than keep changing a user's go.mod file. To support versions of Go that are
not 1.14, we run a modified "go list" command that checks the release tags to see
if 1.14 is contained.
Updates golang/go#31999
Change-Id: Icb71b6402ec4fa07e5f6f1a63954c25520e860b0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/211538
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Cloning is complicated enough without worrying about concurrency, so
hold the snapshot's lock during the entire process.
Consolidate everything into one function. I don't think that the split
was making it easier to understand, and I was able to see and clean up
some extra complexity once it was all in one place. Let's discuss
options if you think the result is too long.
I don't intend any semantic changes in this CL.
Updates golang/go#35638.
Change-Id: I05c4b28875976293f5fcd56248d9c9e468f85cc6
Reviewed-on: https://go-review.googlesource.com/c/tools/+/211537
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Created an analogous data structure for go.mod files when we parse them
using the golang.org/x/mod package. Gopls can now access the data
within a go.mod file using a parseModHandle and the corresponding
parseModData object. This will help down the road when it is time
to implement the lsp functions for go.mod files.
Updates golang/go#31999
Change-Id: Ibd4d64569bbe3df61b203490b63399d479e7d794
Reviewed-on: https://go-review.googlesource.com/c/tools/+/211303
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
After the addition of golang/go#35964, the import cycle error now
has the import stack attached in the message. This CL parses that
stack and attached the import cycle diagnostic to the import versus
just adding it to the first character of the .go file.
Fixesgolang/go#33085
Change-Id: I6f5f067c338879b898829951236f816aa63d9dfa
Reviewed-on: https://go-review.googlesource.com/c/tools/+/210942
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change is the next step in unification of text synchronization
methods. The logic really belongs in the internal/lsp/cache package
rather than the internal/lsp package.
Pulled out a function to run diagnostics on a file (diagnostics are still
run async).
Change-Id: I5e237411a02af210ad386b37a6c2aa62ef723567
Reviewed-on: https://go-review.googlesource.com/c/tools/+/210784
Reviewed-by: Heschi Kreinick <heschi@google.com>
When we are processing a go.mod file, we are calling go/packages.load
when we should not be. It will always return 0 packages since it is
not a .go file. This CL adds branching inside each internal/lsp protocol
function and also adds a check in snapshot.PackageHandles for the file type
and returns an error. This will prevent `go list` from running on go.mod files for now.
Updates golang/go#31999
Change-Id: Ic6d0e9b7c81e1f404342b98e10b9c5387adde2ee
Reviewed-on: https://go-review.googlesource.com/c/tools/+/210757
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Say you have foo.go and foo_test.go yielding packages "foo" and
"foo.test". Previously when you changed foo_test.go we would
invalidate the foo.test and foo packages. Invalidating foo is not
necessary since it does not depend on any test files. Furthermore, it
caused problems because nothing would refetch foo's metadata until
foo.go changed, so various things (such as finding implementations in
packages that depend on "foo") would be broken.
Now we only invalidate metadata from packages that contain the
modified file. We only invalidate type info from packages that contain
the modified file, or from such packages' transitive reverse
dependencies.
Change-Id: I23d1af91bcdf22fad4faa1b048afe17ef4e403a1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/210460
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
When the go.mod file changes, we should invalidate all the files that are
contained in the package for the mod file. This will allow the files to recheck
their packages in case new packages were added in the go.mod file.
This still does not fix issue where changes to go.mod files do not trigger recalculation of diagnostics.
Updates golang/go#31999
Change-Id: I6d8f1531f5c28ed2dca7fb8ad4ee0317fada787b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/210557
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
When a file is changed, we invalidate various cached data so we
re-type check and refetch metadata as needed. Previously when a file
changed we would delete the metadata for all transitive reverse
dependencies. This broke all-packages-in-workspace features since we
could no longer fetch the package handle for packages without
metadata.
Fix by only deleting metadata for the packages that the file being
changed belongs to. It doesn't seem like a package's metadata contains
anything that is sensitive to changes in the package's dependencies.
Change-Id: I6a2d5df49ecd4d627b37689e48ed48fe78ce658d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/210458
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
When a new file is opened, the first time we learn about it will be a
didOpen event. We need to invalidate the package's metadata in that
case too.
Fixesgolang/go#35638.
Change-Id: I36c6171e9c959c48ede9e125679e8dd1be7609f4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/210559
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
I had mistakenly forgotten to return a snapshot along with the view.
Fixesgolang/go#36020
Change-Id: I1fc802b8924fccec1d6aaa110640eaed490c3aa1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/210215
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change will provide a more useful error when you
are self importing a package. It has TODOs in place to propagate the
"import cycle not allowed" error from go list to the user.
Updates golang/go#33085
Change-Id: Ia868a7c688b0f0a7a9689cfda5ea8cea8ae1faff
Reviewed-on: https://go-review.googlesource.com/c/tools/+/209857
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The invalidateContent function does not acquire a snapshot's mutex to
avoid blocking other work (even though it probably should since it's
only called after a context is canceled). A case was added to iterate
through files when a file is created, and it did not respect the fact
that the snapshot's mutex was not locked, resulting in a concurrent map
read and write. This change makes sure that the access of the snapshot's
files map is guarded by a mutex.
As a follow-up, we should just acquire snapshot.mu in invalidateContent.
Updates golang/go#36006
Change-Id: Idd904ae582055ce786062df50875ac7f0896fd1c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/210199
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
We don't distinguish between genuine errors and context cancellation in
diagnostics, which often results in superfluous logging of these errors.
Avoid spamming the logs with them by checking.
Also, remove the logic for sending undelivered diagnostics. It's a relic
of old bugs and isn't useful.
Change-Id: I7df226539b9b1eb49ab3aae8d7b0a67f59fb3058
Reviewed-on: https://go-review.googlesource.com/c/tools/+/210197
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Apparently I should've had staticcheck on. We were only reading the
metadata in updateMetadata to calculate unused imports, but that's now
at a higher level.
Change-Id: Id3d54fa736062bbbf1c207b8739e87ed5a90293d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/210078
Run-TryBot: Heschi Kreinick <heschi@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Previously, we returned CheckPackageHandles when creating a new view.
Now, return the view's snapshot. Also, add a WorkspacePackageIDs
function in order to run diagnostics on them.
Fixesgolang/go#35548
Change-Id: Ica7e41f5a7aa3ee9413feb4de4ee16e1825db2e1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/209418
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
We weren't maintaining our ancestor node list correctly. This caused
us to fail to make AST repairs in certain cases. Now we are careful to
always append to the ancestors list when recursing.
Updates golang/go#34332.
Change-Id: I9b51ec70572170d9f592060d264c98b1f9720fb8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/209966
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Previously, we would reload if a user's import list decreased or simply
changed order. This is not necessary. Now, we only re-run if a new import
needs to be loaded.
Updates golang/go#35388
Change-Id: I47874afe773dddb835ac27b18895e7a082950dc7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/209057
Reviewed-by: Heschi Kreinick <heschi@google.com>
When searching for implementations we look at all packages in the
workspace. We do a full parse since we need to look for non-exported
types and look in functions for type declarations. However, we always
type check a package's dependencies in export-only mode to save work.
This leads to what I call the "two world" syndrome where you have both
the export-only and full-parse versions of a package in play at once.
This is problematic because mirror objects in each version do not
compare equal.
For example:
-- a/a.go --
package a
type Breed int
const Mutt Breed = 0
type Dog interface{ Breed() Breed }
-- b/b.go --
package b
import "a"
type dog struct{}
func (dog) Breed() a.Breed { return a.Mutt }
---
In this situation, the problem is "b" loads its dependency "a" in
export only mode so it gets one version of the "a.Breed" type. The
user opens package "a" directly so it gets fully type checked and has
a second version of "a.Breed". The user searches for "a.Dog"
implementations, but "b.dog" does not implement the fully-loaded
"a.Dog" because it returns the export-only version of the "a.Breed"
type.
Fix it by always loading in-workspace dependencies in full parse mode.
We need to load them in full parse mode anyway if the user does find
references or find implementations.
In writing a test I fixed an incorrect import in the testdata. This
uncovered an unrelated bug which made a different implementation test
very flaky. I disabled it for now since I couldn't see a fix simple
enough to slip into this commit.
Fixesgolang/go#35857.
Change-Id: I01509f57d54d593e62c895c7ecb93eb5f780bec7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/209759
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Lack of context in error messages is making my life difficult. Add
context to a few, refactoring out some duplicate code along the way.
Change-Id: I3a940b12ec7c82b1ae1fc477694a2b8b45f6ff71
Reviewed-on: https://go-review.googlesource.com/c/tools/+/209860
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
As far as I can tell, the code I removed in from load did roughly
nothing -- returning nil metadata didn't suppress type checking as I
think was intended. Throwing away the metadata also created the race in
Pull the check for missing import changes up to PackageHandles, where it
is non-racy and can cause type checking to be skipped. Simplify and
refactor.
Fixesgolang/go#35951.
Change-Id: Id4b32b86569afb36863aaf982616b2b3727b0e83
Reviewed-on: https://go-review.googlesource.com/c/tools/+/209737
Run-TryBot: Heschi Kreinick <heschi@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Sometimes the prefix of the thing you want to complete is a keyword.
For example:
variance := 123
fmt.Println(var<>)
In this case the parser produces an *ast.BadExpr which breaks
completion. We now repair this BadExpr by replacing it with
an *ast.Ident named "var".
We also repair empty decls using a similar approach. This fixes cases
like:
var typeName string
type<> // want to complete to "typeName"
We also fix accidental keywords in selectors, such as:
foo.var<>
The parser produces a phantom "_" in place of the keyword, so we swap
it back for an *ast.Ident named "var".
In general, though, accidental keywords wreak havoc on the AST so we
can only do so much. There are still many cases where a keyword prefix
breaks completion. Perhaps in the future the parser can be
cursor/in-progress-edit aware and turn accidental keywords into
identifiers.
Fixesgolang/go#34332.
PS I tweaked nodeContains() to include n.End() to fix a test failure
against tip related to a change to go/parser. When a syntax error is
present, an *ast.BlockStmt's End() is now set to the block's final
statement's End() (earlier than what it used to be). In order for the
cursor pos to test "inside" the block in this case I had to relax the
End() comparison.
Change-Id: Ib45952cf086cc974f1578298df3dd12829344faa
Reviewed-on: https://go-review.googlesource.com/c/tools/+/209438
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We were previously returning errors when we failed to load/check a
user's workspace folder, but now we suppress all errors. We shouldn't
disable gopls functionality if something is broken in a user's workspace
folder, rather, we should fall back to the file= queries that will run
when a user edits a file.
Change-Id: Iae05174ca80d2573c0222ac42f29e5556bda0134
Reviewed-on: https://go-review.googlesource.com/c/tools/+/209420
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Running staticcheck on the entire workspace causes a slowdown, and most
likely users don't want to see staticcheck reports for every
subdirectory of their workspace. Only run staticcheck on open files.
Also, fixed a staticcheck warning that showed up along the way. Filed
golang/go#35718 to remind ourselves to fix all of the staticcheck warnings
that showed up when we ran gopls with staticcheck on x/tools.
Finally, made sure that we don't send empty diagnostics when diagnosing
the snapshot on start-up, as that is not necessary.
Change-Id: Ic51d1abfc80b1b53397057f06a4cfd7e2dc930f9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208098
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
The early return logic for didOpen events in
(*snapshot).invalidateContent was preventing the creation of a new
snapshot, which was in turn stopping the versions from being updated.
This exposed a fundamental issue in the way we were calculating
workspace diagnostics. Since we weren't waiting for diagnostics to be
completed for an entire snapshot before replying that the server had
been initialized, snapshots were being cloned without any type
information. For quickfix code actions, we assume that we have all
information cached (since we need to have sent the diagnostics that the
quickfix is mapped to), so we were not finding the cached analysis
results.
To handle this in the short-term, we key analyses by their names, and
then regenerate results as-needed for code actions. This is technically
more correct than simply assuming that we have the analyses cached. In a
follow-up CL, I will send a follow-up that will make sure that
snapshots "wait" on each other to be fully constructed before being
cloned.
Change-Id: Ie89fcdb438b6b8b675f87335561bf47b768641ac
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208265
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
When packages.Load'ing cgo packages, the authored files show up in
GoFiles, and the generated files show up in CompiledGoFiles. We need the
AST and type information for the latter, since they're the only thing we
can type check. But we also need the contents (and column mapper) for
the authored file so that we can navigate into it.
Store GoFiles in package metadata and checked Packages. Parse the extra
files, just for their mappers. Refactor the View functions a little bit,
since there's only one place that actually needs to find the mapper for
a file.
Updates golang/go#35720.
Change-Id: I9f96872a9a592bf0e11da27ebd8976c6db8752c9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208502
Run-TryBot: Heschi Kreinick <heschi@google.com>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
I'm not sure why this was being managed by the view, but delete the code
that handles tracking a file's first change. It is only used to avoid
spamming the user with error messages.
Change-Id: Id95089478ffb7e189d38cbc147e3dde6a1c55c5e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208274
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Right now, we request analyses for files in ParseExported mode, which
doesn't actually produce any meaningful facts. Disable it until we
resolvegolang/go#35089, since right now, all this is doing is wasting
memory and CPU.
Change-Id: I6ffb7bdf6c915159b55753b51289cef4bd937603
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208270
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change modifies the behavior of the GetReverseDependencies function
used for diagnostics. Since we now return diagnostics for the entire
workspace, we don't have to worry if a file is open to show errors in
it. This change requires the addition of a new (*snapshot).PackageHandle
function that gets a CheckPackageHandle for a given package ID. This
function does not cause a re-load of the package metadata, though if we
feel that this is something we need in the future we can add it.
Change-Id: I863bdf284d15f2317d8fae395928a90b9455146b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208102
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change uses the FileIdentity when reporting an error message, so
that the version number can be propagated to through the
publishDiagnostics notification.
Change-Id: I6a2103e304717ca09895008ea40336e3ace3c66d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208260
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change cleans up internal/lsp/source/view.go to have a more logical
ordering and deletes the view.CheckPackageHandle function. Now, the only
way to get a CheckPackageHandle is through a snapshot (so all of the
corresponding edits).
Also, renamed fuzzy tests to fuzzymatch. Noticed this weird error when
debugging - I had golang.org/x/tools/internal/lsp/fuzzy in my module
cache and it conflicted with the test version.
Change-Id: Ib87836796a8e76e6b6ed1306c2a93e9a5db91cce
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208099
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
As we improve support for cgo we'll need to reference GoFiles, not just
CompiledGoFiles. "Files" is right out.
I think I got everything that needs renaming but please let me know if
not.
Updates golang/go#35720.
Change-Id: I97a6ebf5b395535de0d5f4f8b3f84b46ca34643f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208101
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
When line directives are in use, we want the logical file name, not the
one we found the bytes in. This matters most for cgo, where the file we
parsed is not the one the user wants to see.
Updates golang/go#35720.
Change-Id: I495328071d8865e6895cb731467f1601f11e93db
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208100
Run-TryBot: Heschi Kreinick <heschi@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change runs diagnostics on all packages in the workspace, instead
of just open files. We also want to avoid invalidating the type
information for a newly-opened file (since we should have it be default
now), so handle that case.
This causes a large increase in memory usage in the
internal/lsp/cmd tests, so to handle that, share an app between all of
the tests, rather than creating one per-test type.
Change-Id: Ifba18d77a700cda79ec79f66174de0e7f13fe319
Reviewed-on: https://go-review.googlesource.com/c/tools/+/207353
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
textDocument/didChange events need to indicate if the change includes
the full file content or just a diff. Previously, the
contentChange.Range field was a pointer, so if it was nil, then we would
conclude that the file change was for the whole file. Now, the best we
can do is compare it to an empty range, but this still doesn't work if
you are at the beginning of a file. I think that the range needs to be a
pointer for this to work correctly.
Also, some minor changes that came up along the way while debugging:
(1) Don't close over the *cache variable for fear of pinning anything in
memory
(2) Improve the error message when the token.File is nil
(3) Check for a nil token.File earlier
Change-Id: If9f310e92b7fb740b45e6cd3f9ca678a6fb52ff6
Reviewed-on: https://go-review.googlesource.com/c/tools/+/207906
Reviewed-by: Heschi Kreinick <heschi@google.com>
Rather than panicking when we have not created any views for the packages,
we should show a reasonable error to the user. This change propagates the
errors to the user.
Updates golang/go#35599
Change-Id: I49789d8ce18e154f111bc3584488f468a129e30c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/207344
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
When looking for references, look in the entire workspace rather than
the same package. This makes the references query more expensive because
it needs to look at every package in the workspace, but hopefully
it shouln't be user-noticable. This can be made more efficient by only
checking packages that are transitive reverse dependencies. I don't think a
mechanism to get all transitive reverse dependencies exists yet.
One of the references test have been changed: it looked up references
of the builtin int type, but now there are so many refererences that
the test too slow and doesn't make sense any more. Instead look up
references of the type "i" in that file.
Change-Id: I93b3bd3795386f06ce488e76e6c7c8c1b1074e22
Reviewed-on: https://go-review.googlesource.com/c/tools/+/206883
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change is the first step in centralizing control of modifications
to different files, either within the workspace or outside of it. We add
a source.FileAction type to pass into the internal/lsp/cache package and
handle the difference between opening and creating a file.
Now that we load all packages in a workspace by default, we no longer
need to re-load a file on open. This CL should enable CL 206883 to work
correctly.
Change-Id: I2ddb21ca2dd33720d668066e73283f5629d02867
Reviewed-on: https://go-review.googlesource.com/c/tools/+/206888
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change propagates the versions sent by the client to the overlay
so that they can be used when sending text edits for code actions and
renames.
Fixesgolang/go#35243
Change-Id: I8d1eb86fe9f666f7aa287be5026b176b46712c97
Reviewed-on: https://go-review.googlesource.com/c/tools/+/205863
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change makes sure that we only return files that contain the given
position. There are a few instances of needing to look up files by URI
in the internal/lsp/cache package, so use an unexported package for
that. This allows us to remove some code in the implementations code.
Change-Id: Ifa7a62c67271826e6c632e4c88667d60f8b760c4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/206880
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
This change adds support for returning versions along with file URIs, so
that the client can know when to apply changes. The version is not yet
propagated along to the internal/lsp/cache package, so this change will
have no effect (VS Code ignores a version of 0 and still applies the
changes).
A few minor changes made in the rename code (to remove the view
parameter). Some minor staticcheck fixes.
Updates golang/go#35243
Change-Id: Icc26bd9d9e5703c699f555424b94034c97b01d6f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/206882
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
If a user is typing fast, they will quickly invalidate many snapshots.
We don't want to stack up a bunch of stale type check and analysis
operations, so we should propagate cancellation through the cache.
Handles are long-lived, so we may cancel an operation only to
restart it again later. Also, there may be multiple operations waiting on
the same computation, and just because one is cancelled doesn't mean we
should necessarily stop. The easiest way to support all that was to add
an explicit state to each handle, and track the number of waiters.
See the code for more details on Handle life cycles.
As far as I can tell, the rest of gopls is prepared for this behavior.
I added an explicit check to the type checking code, where I was worried
it might get overly confused. But long-term it would probably be good to
return an error from Get.
Change-Id: I3ea6e141b52b94300a41248d3f2e039b023709d0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/206879
Run-TryBot: Heschi Kreinick <heschi@google.com>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Look in all packages the snapshot knows of (through a new method on snapshot called
KnownPackages) and see if any of those packages contain implementations. Before,
the Implementation call only looked in the current package.
Much of the new complexity in implementation.go is routing through the Type to
Package data in the implementsResult.pkg field so the identifier can be looked up
in its correct package.
Fixesgolang/go#32973
Change-Id: Ifa7115b300f52fb4fb55cc00db2e7f339e8c2582
Reviewed-on: https://go-review.googlesource.com/c/tools/+/206518
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
It attempts to detect changes that would invalidate the view and replace itself
with a new view when that happens
Change-Id: I0f1a8cd3bd6ddcef115fedc6c57ae0398b16d3b6
Reviewed-on: https://go-review.googlesource.com/c/tools/+/206147
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We don't want to return an error for the whole package when we are just
building out error positions.
Change-Id: I56b5b88ff2b4b44da8a372ade81cd9b1534235c4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/206597
Reviewed-by: Heschi Kreinick <heschi@google.com>
Run-TryBot: Heschi Kreinick <heschi@google.com>
Even if the packages.Load of the directory the NewView is being created for
fails, create and add the view. But also return the error from NewView, just
after the new view has been added.
Fixesgolang/go#35468
Change-Id: I76c2d3cbe1a508ad0794a6fcd3bc67cd48c97e22
Reviewed-on: https://go-review.googlesource.com/c/tools/+/206497
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Treat it as okay if no packages are found when loading all the packages in a
workspace. Users may open workspaces that don't have any Go files, either because
they are workspaces for other languages, or because no Go files have been created
yet.
Fixesgolang/go#35455
Change-Id: I60912472ec8930649996edc150d1d19cd74a0a2e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/206140
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Add a source.Scope type that can be used to refer to directories or
files, and modify (*snapshot).load to take source.Scope.
Then call load in NewView.
Change-Id: I8f03c7b271d700b162100d2890d23219ef9578c2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/204822
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Add a new "verboseOutput" config flag (defaults to "false") to enable
verbose go/packages and imports output. Previously this output was
always present.
The go/packages output would dump out the entire (humongous) "go list"
JSON response which would lock up my editor for a second whenever
something triggered a go/packages call.
The imports output would produce a bunch of "gopathwalk" debug
messages that aren't useful in general and in particular add noisy
output to tests.
Change-Id: Ie4693d074cb84f1397e0e51d7346dc9391bd1278
Reviewed-on: https://go-review.googlesource.com/c/tools/+/205138
Reviewed-by: Koichi Shiraishi <zchee.io@gmail.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Unimported completions now try to pull Packages from everywhere, not
just the transitive dependencies of the current package. That confused
the import formatting code, which only looked at deps. Pass the Package
along with the import suggestion, and use it when it's present.
Also change some error messages to be different for diagnostic purposes.
Fixesgolang/go#35359.
Change-Id: Ia8ca923e46723e855ddd2da7611e6eb13c02bb4f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/205501
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Loading completion suggestions can be slow, especially in GOPATH mode
where basically anything can change at any time. As a compromise, cache
everything for 30 seconds. Specifically, after a completion operation
finishes, if the cache is more than 30 seconds old, refresh it
asynchronously. That keeps user-facing latency consistent, without
chewing up CPU when the editor isn't in use. It does mean that if you
walk away for an hour and come back, the first completion may be stale.
In module mode this is relatively benign. The only things the
longer caching affects are the main module and replace targets, and
relevant packages in those will generally be loaded by gopls, so they'll
have full, up-to-date type information regardless.
In GOPATH mode this may be more troublesome, since it affects
everything. In particular, go get -u of a package that isn't imported
yet won't be reflected until the cache period expires. I think that's a
rare enough case not to worry about.
Change-Id: Iaadfd0ff647cda2b1dcdead9254b5492b397e86e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/205163
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Packages that aren't imported in the current file will often have been
used elsewhere, which means that gopls will have their type information
available. Expose loaded packages in the Snapshot, and try to use that
information when possible for unimported packages.
Change-Id: Icb672618a9f9ec31b9796f0c5da56ed3d2b38aa7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/204824
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The metadata was being added to the cache before it was fully computed.
Change-Id: I6931476a715f0383f7739fa4e950dcaa6cbec4fe
Reviewed-on: https://go-review.googlesource.com/c/tools/+/204562
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Some analyses may panic, so we should be careful to recover.
Change-Id: Ie13df07aca1a21f4e6a66648cd4890b6a31966cc
Reviewed-on: https://go-review.googlesource.com/c/tools/+/204817
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
