On ARM64 we use two separate instructions to compute the hi and lo
results of a 64x64->128 multiplication. Lower to two separate ops
so if only one result is needed we can deadcode the other.
Fixes#54607.
Change-Id: Ib023e77eb2b2b0bcf467b45471cb8a294bce6f90
Reviewed-on: https://go-review.googlesource.com/c/go/+/425101
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
For #23870
Change-Id: I3bbe0f751254d1354a59a88b45e6f944c7a2fb4d
Reviewed-on: https://go-review.googlesource.com/c/go/+/417874
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
With the introduction of stack objects, VARKILL information is
no longer needed.
With stack objects, an object is dead when there are no more static
references to it, and the stack scanner can't find any live pointers
to it. VARKILL information isn't used to establish live ranges for
address-taken variables any more. In effect, the last static reference
*is* the VARKILL, and there's an additional dynamic liveness check
during stack scanning.
Next CL will actually rip out the VARKILL opcodes.
Change-Id: I030a2ab867445cf4e0e69397911f8a2e2f0ed07b
Reviewed-on: https://go-review.googlesource.com/c/go/+/419234
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
We don't need this special loop construct anymore now that we do
conservative GC scanning of the top of stack. Rewrite instead to a simple
pointer increment on every iteration. This leads to having a potential
past-the-end pointer at the end of the last iteration, but that value
immediately goes dead after the loop condition fails, and the past-the-end
pointer is never live across any call.
This simplifies and speeds up loops.
R=go1.20
TODO: actually delete all support for OFORUNTIL. It is now never generated,
but code to handle it (e.g. in ssagen) is still around.
TODO: in "for _, x := range" loops, we could get rid of the index
altogether and use a "pointer to the last element" reference to determine
when the loop is complete.
Fixes#53409
Change-Id: Ifc141600ff898a8bc6a75f793e575f8862679ba1
Reviewed-on: https://go-review.googlesource.com/c/go/+/414876
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The non-unified frontend had repeated issues with inlining and
generics (#49309, #51909, #52907), which led us to substantially
restrict inlining when shape types were present.
However, these issues are evidently not present in unified IR's
inliner, and the safety restrictions added for the non-unified
frontend can simply be disabled in unified mode.
Fixes#54497.
Change-Id: I8e6ac9f3393c588bfaf14c6452891b9640a9d1bd
Reviewed-on: https://go-review.googlesource.com/c/go/+/424775
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
As a consistency check in devirtualization, when we determine `i` (of
interface type `I`) always has dynamic type `T`, we insert a type
assertion `i.(T)`. This emits an itab check for `go:itab.T,I`, but
it's always true (and so SSA optimizes it away).
However, if `I` is instead the generic interface type `I[T]`, then
`go:itab.T,I[int]` and `go:itab.T,I[go.shape.int]` are equivalent but
distinct itabs. And notably, we'll have originally created the
interface value using the former; but the (non-dynamic) TypeAssertExpr
created by devirtualization would ultimately emit a comparison against
the latter. This comparison would then evaluate false, leading to a
spurious type assertion panic at runtime.
The comparison is just meant as an extra safety check, so it should be
safe to just disable. But for now, it's simpler/safer to just punt on
devirtualization in this case. (The non-unified frontend doesn't
devirtualize this either.)
Change-Id: I6a8809bcfebc9571f32e289fa4bc6a8b0d21ca46
Reviewed-on: https://go-review.googlesource.com/c/go/+/424774
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
This CL switches unified IR to use shape-based stenciling with runtime
dictionaries, like the existing non-unified frontend. Specifically,
when instantiating generic functions and types `X[T]`, we now also
instantiated shaped variants `X[shapify(T)]` that can be shared by
`T`'s with common underlying types.
For example, for generic function `F`, `F[int](args...)` will be
rewritten to `F[go.shape.int](&.dict.F[int], args...)`.
For generic type `T` with method `M` and value `t` of type `T[int]`,
`t.M(args...)` will be rewritten to `T[go.shape.int].M(t,
&.dict.T[int], args...)`.
Two notable distinctions from the non-unified frontend:
1. For simplicity, currently shaping is limited to simply converting
type arguments to their underlying type. Subsequent CLs will implement
more aggressive shaping.
2. For generic types, a single dictionary is generated to be shared by
all methods, rather than separate dictionaries for each method. I
originally went with this design because I have an idea of changing
interface calls to pass the itab pointer via the closure
register (which should have zero overhead), and then the interface
wrappers for generic methods could use the *runtime.itab to find the
runtime dictionary that corresponds to the dynamic type. This would
allow emitting fewer method wrappers.
However, this choice does have the consequence that currently even if
a method is unused and its code is pruned by the linker, it may have
produced runtime dictionary entries that need to be kept alive anyway.
I'm open to changing this to generate per-method dictionaries, though
this would require changing the unified IR export data format; so it
would be best to make this decision before Go 1.20.
The other option is making the linker smarter about pruning unneeded
dictionary entries, like how it already prunes itab entries. For
example, the runtime dictionary for `T[int]` could have a `R_DICTTYPE`
meta-relocation against symbol `.dicttype.T[go.shape.int]` that
declares it's a dictionary associated with that type; and then each
method on `T[go.shape.T]` could have `R_DICTUSE` meta-relocations
against `.dicttype.T[go.shape.T]+offset` indicating which fields
within dictionaries of that type need to be preserved.
Change-Id: I369580b1d93d19640a4b5ecada4f6231adcce3fd
Reviewed-on: https://go-review.googlesource.com/c/go/+/421821
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Updated multiple tests in test/codegen: math.go, mathbits.go, shift.go
and slices.go to verify on ppc64/ppc64le as well
Change-Id: Id88dd41569b7097819fb4d451b615f69cf7f7a94
Reviewed-on: https://go-review.googlesource.com/c/go/+/412115
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Archana Ravindar <aravind5@in.ibm.com>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Paul Murphy <murp@ibm.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
CL 414836 limited the check for implicit dot for method call enabled by
a type bound. However, the checking condition for ODOTMETH only is not
right. For example, for promoted method, we have a OXDOT node instead,
and we still have to check for implicit dot in this case.
However, if the base type and embedded types have the same method name,
e.g in issue #53419, typecheck.AddImplicitDots will be confused and
result in an ambigus selector.
To fix this, we ensure methods for the base type are computed, then only
do the implicit dot check if we can find a matched method.
Fixes#54348
Change-Id: Iefe84ff330830afe35c5daffd499824db108da23
Reviewed-on: https://go-review.googlesource.com/c/go/+/422274
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The issue is expected to be fixed when Unified IR is enabled by default,
so adding a test to make sure thing works correctly.
Updates #53702
Change-Id: Id9d7d7ca4506103df0d10785ed5ee170d69988ba
Reviewed-on: https://go-review.googlesource.com/c/go/+/423434
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
I structured the test for issue54343.go after issue46725.go, where I
was careful to use `[4]int`, which is a type large enough to avoid the
tiny object allocator (which interferes with finalizer semantics). But
in that test, I didn't note the importance of that type, so I
mistakenly used just `int` in issue54343.go.
This CL switches issue54343.go to use `[4]int` too, and then adds
comments to both pointing out the significance of this type.
Updates #54343.
Change-Id: I699b3e64b844ff6d8438bbcb4d1935615a6d8cc4
Reviewed-on: https://go-review.googlesource.com/c/go/+/423115
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: David Chase <drchase@google.com>
With GOEXPERIMENT=unified, the order variables are printed in "live at
entry to f.func1" is sensitive to whether regabi is enabled for some
reason. The order shouldn't matter to correctness, but it is odd.
For now, this CL just relaxes the test expectation order to unblock
enabling GOEXPERIMENT=unified by default. I've filed #54402 to
investigate further to confirm this a concern.
Updates #54402.
Change-Id: Iddfbb12c6cf7cc17b2aec8102b33761abd5f93ad
Reviewed-on: https://go-review.googlesource.com/c/go/+/422975
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
For selector expression "x.M" where "M" is a promoted method, irgen is using
the type of receiver "x" for determining the typeparams for instantiation.
However, because M is a promoted method, so its associated receiver is
not "x", but "x.T" where "T" is the embedded field of "x". That casues a
mismatch when converting non-shape types arguments.
Fixing it by using the actual receiver which has the method, instead of
using the base receiver.
Fixes#53982
Change-Id: I1836fc422d734df14e9e6664d4bd014503960bfc
Reviewed-on: https://go-review.googlesource.com/c/go/+/419294
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
This CL applies the same change to test/live.go that was previously
applied to test/live_regabi.go in golang.org/cl/415240. This wasn't
noticed at the time though, because GOEXPERIMENT=unified was only
being tested on linux-amd64, which is a regabi platform.
Change-Id: I0c75c2b7097544305e4174c2f5ec6ec283c81a8e
Reviewed-on: https://go-review.googlesource.com/c/go/+/422254
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
`go env GOEXPERIMENT` prints what experiments are enabled relative to
the baseline configuration, so it's not a very robust way to detect
what experiments have been statically enabled at bootstrap time.
Instead, we can check build.Default.ToolTags, which has goexperiment.*
for all currently enabled experiments, independent of baseline.
Change-Id: I6132deaa73b1e79ac24176ef4de5af67a507ee26
Reviewed-on: https://go-review.googlesource.com/c/go/+/422234
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
For signed comparisons, the following four optimization rules hold:
(CMPconst [0] z:(AND x y)) && z.Uses == 1 => (TST x y)
(CMPWconst [0] z:(AND x y)) && z.Uses == 1 => (TSTW x y)
(CMPconst [0] x:(ANDconst [c] y)) && x.Uses == 1 => (TSTconst [c] y)
(CMPWconst [0] x:(ANDconst [c] y)) && x.Uses == 1 => (TSTWconst [int32(c)] y)
But currently they only apply to jump instructions, not to conditional
instructions within a block, such as cset, csel, etc. This CL extends
the above rules into blocks so that conditional instructions can also be
optimized.
name old time/op new time/op delta
DivisiblePow2constI64-160 1.04ns ± 0% 0.86ns ± 0% -17.30% (p=0.008 n=5+5)
DivisiblePow2constI32-160 1.04ns ± 0% 0.87ns ± 0% -16.16% (p=0.016 n=4+5)
DivisiblePow2constI16-160 1.04ns ± 0% 0.87ns ± 0% -16.03% (p=0.008 n=5+5)
DivisiblePow2constI8-160 1.04ns ± 0% 0.86ns ± 0% -17.15% (p=0.008 n=5+5)
Change-Id: I6bc34bff30862210e8dd001e0340b8fe502fe3de
Reviewed-on: https://go-review.googlesource.com/c/go/+/420434
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Run-TryBot: Eric Fang <eric.fang@arm.com>
This CL adds a test that method expressions where the receiver type is
a derived type and embeds a promoted method work correctly.
Change-Id: I2e7c96007b6d9e6f942dc14228970ac508ff5c15
Reviewed-on: https://go-review.googlesource.com/c/go/+/422199
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The Go 1.18 frontend handles package-scope generic method values by
spilling the receiver value to a global temporary variable, which pins
it into memory. This issue isn't present in unified IR, which uses
OMETHVALUE when the receiver type is statically known.
Updates #54343.
Change-Id: I2c4ffeb125a3cf338f949a93b0baac75fff6cd31
Reviewed-on: https://go-review.googlesource.com/c/go/+/422198
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
As it can't appear in user package paths.
There is a hack for handling "go:buildid" and "type:*" on windows/386.
Previously, windows/386 requires underscore prefix on external symbols,
but that's only applied for SHOSTOBJ/SUNDEFEXT or cgo export symbols.
"go.buildid" is STEXT, "type.*" is STYPE, thus they are not prefixed
with underscore.
In external linking mode, the external linker can't resolve them as
external symbols. But we are lucky that they have "." in their name,
so the external linker see them as Forwarder RVA exports. See:
- https://docs.microsoft.com/en-us/windows/win32/debug/pe-format#export-address-table
- https://sourceware.org/git/?p=binutils-gdb.git;a=blob;f=ld/pe-dll.c;h=e7b82ba6ffadf74dc1b9ee71dc13d48336941e51;hb=HEAD#l972)
This CL changes "." to ":" in symbols name, so theses symbols can not be
found by external linker anymore. So a hacky way is adding the
underscore prefix for these 2 symbols. I don't have enough knowledge to
verify whether adding the underscore for all STEXT/STYPE symbols are
fine, even if it could be, that would be done in future CL.
Fixes#37762
Change-Id: I92eaaf24c0820926a36e0530fdb07b07af1fcc35
Reviewed-on: https://go-review.googlesource.com/c/go/+/317917
Reviewed-by: Than McIntosh <thanm@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Currently there is a an ANDconst and an ANDCCconst op in PPC64,
which is confusing since they map onto the same instruction.
One of these ops sets the result of the AND operation, and the
other sets the flag (condition register).
This converts ANDCCconst into an op with the 2 expected results:
the integer result of the AND and the flag setting. The ANDconst
op has been removed.
Note that in the PPC64 ISA the only variation of the 'and immediate'
is the one that sets the condition bit, which probably led to the
original (confusing) implementation.
This also adds a few rules to improve the use of ANDCCconst with
ISELB and some testcases to verify those improvements.
Change-Id: I523703fa4da2098eb995dc3ba744d36fa28e41d4
Reviewed-on: https://go-review.googlesource.com/c/go/+/422015
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Paul Murphy <murp@ibm.com>
When types2 type checks a method expression or method value that
selects a type parameter method, the Selection.Index is indexed based
on the method's index within the type parameter's constraint
interface.
However, with a fully-stenciled implementation, naively using the
index would result in picking a method from the corresponding type
argument's full method set, which could select a different method.
Unified IR currently avoids this because it selects methods based on
name, not index; but experimenting with index-based selection revealed
that there are no test cases that would have caught this failure case.
Change-Id: Idbc39e1ee741714203d4749e47f5bc015af25020
Reviewed-on: https://go-review.googlesource.com/c/go/+/421815
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
We don't need a multiply when the element type is size 0 or 1.
The panic functions don't return, so we don't need any post-call
code (register restores, etc.).
Change-Id: I0dcea5df56d29d7be26554ddca966b3903c672e5
Reviewed-on: https://go-review.googlesource.com/c/go/+/419754
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
There's no need for a and b to match types. The typechecker already
ensured that a and b are both slices with the same base type, or
a and b are (possibly named) []byte and string.
The optimization to treat append(b, make([], ...)) as a zeroing
slice extension doesn't fire when there's a OCONVNOP wrapping the make.
Fixes#53888
Change-Id: Ied871ed0bbb8e4a4b35d280c71acbab8103691bc
Reviewed-on: https://go-review.googlesource.com/c/go/+/418475
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
Same as CL 417555, but for cmd/compile.
Fixes#54220
Change-Id: I4cc6deaf0a87c952f636888b4ab73f81a44bfebd
Reviewed-on: https://go-review.googlesource.com/c/go/+/420975
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
The RType field isn't needed when performing type assertions from
non-empty interface types, because we use the ITab field instead. But
the inline body exporter didn't know to expect this.
It's possible we could use a single bool to distinguish whether
we're serializing the RType or ITab field, but using two is simpler
and seems safer.
Fixes#54302.
Change-Id: I9ddac72784fb2241fee0a0dee30493d868a2c259
Reviewed-on: https://go-review.googlesource.com/c/go/+/421755
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Merge List:
+ 2022-08-04 85d87b9c75 all: update vendored golang.org/x dependencies for Go 1.20 development
+ 2022-08-04 fb1bfd4d37 all: remove pre-Go 1.17 workarounds
+ 2022-08-04 44ff9bff0c runtime: clean up panic and deadlock lock ranks
+ 2022-08-04 f42dc0de74 runtime: make the lock rank DAG make more sense
+ 2022-08-04 d29a0282e9 runtime: add mayAcquire annotation for finlock
+ 2022-08-04 c5be4ed7df runtime: add missing trace lock edges
+ 2022-08-04 2b8a9a484f runtime: generate the lock ranking from a DAG description
+ 2022-08-04 ddfd639408 runtime: delete unused lock ranks
+ 2022-08-04 426ea5702b internal/dag: add a Graph type and make node order deterministic
+ 2022-08-04 d37cc9a8cd go/build, internal/dag: lift DAG parser into an internal package
+ 2022-08-04 ab0a94c6d3 cmd/dist: require Go 1.17 for building Go
+ 2022-08-04 1e3c19f3fe runtime: support riscv64 SV57 mode
+ 2022-08-03 f28fa952b5 make.bat, make.rc: show bootstrap toolchain version
+ 2022-08-03 87384801dc cmd/asm: update package doc to describe "-p" option
+ 2022-08-03 c6a2dada0d net: disable TestIPv6WriteMsgUDPAddrPortTargetAddrIPVersion [sic] on DragonflyBSD
+ 2022-08-02 29b9a328d2 runtime: trivial replacements of g in remaining files
+ 2022-08-02 c647264619 runtime: trivial replacements of g in signal_unix.go
+ 2022-08-02 399f50c9d7 runtime: tricky replacements of g in traceback.go
+ 2022-08-02 4509e951ec runtime: tricky replacements of g in proc.go
+ 2022-08-02 4400238ec8 runtime: trivial replacements of _g_ in remaining files
+ 2022-08-02 5999a28de8 runtime: trivial replacements of _g_ in os files
+ 2022-08-02 0e18cf6d09 runtime: trivial replacements of _g_ in GC files
+ 2022-08-02 4358a53a97 runtime: trivial replacements of _g_ in proc.go
+ 2022-08-02 b486518964 runtime: tricky replacements of _g_ in os3_solaris.go
+ 2022-08-02 54a0ab3f7b runtime: tricky replacements of _g_ in os3_plan9.go
+ 2022-08-02 4240ff764b runtime: tricky replacements of _g_ in signal_windows.go
+ 2022-08-02 8666d89ca8 runtime: tricky replacements of _g_ in signal_unix.go
+ 2022-08-02 74cee276fe runtime: tricky replacements of _g_ in trace.go
+ 2022-08-02 222799fde6 runtime: tricky replacements of _g_ in mgc.go
+ 2022-08-02 e9d7f54a1a runtime: tricky replacements of _g_ in proc.go
+ 2022-08-02 5e8d261918 runtime: rename _p_ to pp
+ 2022-08-02 0ad2ec6596 runtime: clean up dopanic_m
+ 2022-08-02 7e952962df runtime: clean up canpanic
+ 2022-08-02 9dbc0f3556 runtime: fix outdated g.m comment in traceback.go
+ 2022-08-02 d723df76da internal/goversion: update Version to 1.20
+ 2022-08-02 1b7e71e8ae all: disable tests that fail on Alpine
+ 2022-08-01 f2a9f3e2e0 test: improve generic type assertion test
+ 2022-08-01 27038b70f8 cmd/compile: fix wrong dict pass condition for type assertions
+ 2022-08-01 e99f53fed9 doc: move Go 1.19 release notes to x/website
+ 2022-08-01 8b13a073a1 doc: mention removal of cmd/compile's -importmap and -installsuffix flags
+ 2022-08-01 e95fd4c238 doc/go1.19: fix typo: EM_LONGARCH -> EM_LOONGARCH
+ 2022-08-01 dee3efd9f8 doc/go1.19: fix a few links that were missing trailing slashes
+ 2022-07-30 f32519e5fb runtime: fix typos
+ 2022-07-29 9a2001a8cc cmd/dist: always pass -short=true with -quick
+ 2022-07-28 5c8ec89cb5 doc/go1.19: minor adjustments and links
+ 2022-07-28 417be37048 doc/go1.19: improve the loong64 release notes
+ 2022-07-28 027855e8d8 os/exec: add GODEBUG setting to opt out of ErrDot changes
Change-Id: Idc0fbe93978c0dff7600b90a2c3ecc067fd9f5f2
The test added in CL 420394 only tested that the type assertions
compiled at all. This CL changes it into a run test to make sure the
type assertions compile and also run correctly.
Updates #54135.
Change-Id: Id17469faad1bb55ff79b0bb4163ef50179330033
Reviewed-on: https://go-review.googlesource.com/c/go/+/420421
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Fixes#54135
Change-Id: I2b27af8124014b2699ea44bdc765e1fb8f6c8028
Reviewed-on: https://go-review.googlesource.com/c/go/+/420394
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Merge List:
+ 2022-07-27 462b78fe70 misc/cgo/test: use fewer threads in TestSetgidStress in long mode
+ 2022-07-27 055113ef36 math/big: check buffer lengths in GobDecode
+ 2022-07-27 4248146154 net: document UDPConn.ReadFromUDPAddrPort's AddrPort result more
+ 2022-07-26 faf4e97200 net: fix WriteMsgUDPAddrPort addr handling
+ 2022-07-26 caa225dd29 doc/go1.19: note that updated race syso files require GNU ld 2.26
+ 2022-07-26 ceefd3a37b bytes: document that Reader.Reset affects the result of Size
+ 2022-07-26 3e97294663 runtime/cgo: use frame address to set g0 stack bound
+ 2022-07-25 24dc27a3c0 cmd/compile: fix blank label code
+ 2022-07-25 9fcc8b2c1e runtime: fix runtime.Breakpoint() on windows/arm64
+ 2022-07-25 795a88d0c3 cmd/go: add space after comma in 'go help test'
+ 2022-07-25 9eb3992ddd doc/go1.19: minor fixes
+ 2022-07-25 dcea1ee6e3 time: clarify documentation for allowed formats and add tests to prove them
+ 2022-07-25 37c8112b82 internal/fuzz: fix typo in function comments
+ 2022-07-25 850d547d2d doc/go1.19: expand crypto release notes
+ 2022-07-24 64f2829c9c runtime: fix typo in function comments
+ 2022-07-24 2ff563a00e cmd/compile/internal/noder: correct spelling errors for instantiation
+ 2022-07-22 c5da4fb7ac cmd/compile: make jump table symbol local
+ 2022-07-22 774fa58d1d A+C: delete AUTHORS and CONTRIBUTORS
+ 2022-07-21 2d655fb15a unsafe: document when Sizeof/Offsetof/Alignof are not constant
+ 2022-07-21 076c3d7f07 net/http: remove accidental heading in Head documentation
+ 2022-07-21 c4a6d3048b cmd/dist: enable race detector test on S390X
+ 2022-07-20 244c8b0500 cmd/cgo: allow cgo to pass strings or []bytes bigger than 1<<30
+ 2022-07-20 df38614bd7 test: use go tool from tree, not path
+ 2022-07-20 bb1749ba3b cmd/compile: improve GOAMD64=v1 violation test
+ 2022-07-19 176b63e711 crypto/internal/nistec,debug/gosym: fix typos
Change-Id: I96e5d60039381691dffd841e58927f0afff8c544
When checkEnabled is forced true, the 52278 test fails. Be a bit
more careful about processing blank labels.
Update #52278
Change-Id: I48aa89e2c9e3715d8efe599bc4363b5b5879d8a2
Reviewed-on: https://go-review.googlesource.com/c/go/+/419318
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
Some of our tests do exec.Command("go", "tool", "compile", ...) or
similar. That "go" is selected from PATH. When run.go is started
from the command line (but not from all.bash), the first "go" is whatever
happens to be first in the user's path (some random older version than
tip). We really want all these tests to use the "go" tool from the
source tree under test. Add GOROOT/bin to the front of the path to
ensure that the tools we use come from the source tree under test.
Change-Id: I609261a4add8cd5cb228316752d52b5499aec963
Reviewed-on: https://go-review.googlesource.com/c/go/+/418474
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The next CL will change Unified IR's switch statement handling to
convert values to empty interface in some tricky cases. My initial
attempt at this accidentally mishandled `case nil:` in some cases, and
this wasn't caught by any existing tests. So this CL adds one.
Change-Id: Idcfaf0e869dca91be46d665e65d4623dc52bb60f
Reviewed-on: https://go-review.googlesource.com/c/go/+/418099
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
In this test, traditionally the comparison `*l == r[0]` was left as a
comparison between `*l` (type `any`) and `r[0]` (type `*int`), and the
rest of the compiler needed to handle mixed-typed comparisons.
However, this means more complexity for wiring up explicit rtypes.
To simplify rtype handling, the next CL will change unified IR to
instead handle the expression as `*l == any(r[0])`. However, a
consequence of this currently is that walk will now sequence the
`any(r[0])` expression first, because it involves a
concrete-to-interface conversion. And in turn, this means the `r[0]`
panic ("index out of bounds") will take priority over the `*l`
panic ("nil pointer dereference").
This is a change in user-visible semantics in some cases, but the Go
spec leaves this unspecified, so it shouldn't be an issue. Note also:
gccgo has the same behavior (i.e., panicking on index out of bounds,
not nil pointer dereference), and cmd/compile also already has the
same behavior when the interface conversion is explicit (as in the
added "nil pointer dereference #3" test case).
Updates #23735.
Updates #32187.
Change-Id: I49e5dcca85b4680f9c8780ef0013e64254d38fe5
Reviewed-on: https://go-review.googlesource.com/c/go/+/418097
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
Conflicts:
- test/run.go
Conflicts in the known-fails list, plus removed a test from the known-fails that now works.
Merge List:
+ 2022-07-19 8e1e64c16a cmd/compile: fix mknode script
+ 2022-07-19 28be440d34 A+C: add Weizhi Yan
+ 2022-07-19 85a482fc24 runtime: revert to using the precomputed trigger for pacer calculations
+ 2022-07-19 ae7340ab68 CONTRIBUTORS: update for the Go 1.19 release
+ 2022-07-18 de8101d21b runtime: fix typos
+ 2022-07-18 967a3d985d cmd/compile: revert "remove -installsuffix flag"
+ 2022-07-18 c0c1bbde17 http: improve Get documentation
+ 2022-07-15 2aa473cc54 go/types, types2: correct alignment of atomic.Int64
+ 2022-07-15 4651ebf961 encoding/gob: s/TestIngoreDepthLimit/TestIgnoreDepthLimit/
+ 2022-07-14 dc00aed6de go/parser: skip TestParseDepthLimit for short tests
+ 2022-07-14 783ff7dfc4 encoding/xml: skip TestCVE202230633 for short tests
+ 2022-07-14 aa80228526 cmd/go/internal/modfetch: avoid duplicating path components in Git fetch errors
+ 2022-07-14 b9d5a25442 cmd/go: save zip sums for downloaded modules in 'go mod download' in a workspace
+ 2022-07-14 a906d3dd09 cmd/go: avoid re-enqueuing workspace dependencies with errors
+ 2022-07-14 266c70c263 doc/go1.19: add a release note for 'go list -json=SomeField'
+ 2022-07-13 558785a0a9 cmd/compile: remove -installsuffix flag
+ 2022-07-13 1355ea3045 cmd/compile: remove -importmap flag
+ 2022-07-13 f71f3d1b86 misc/cgo/testshared: run tests only in GOPATH mode
+ 2022-07-13 feada53661 misc/cgo/testcshared: don't rely on an erroneous install target in tests
+ 2022-07-13 c006b7ac27 runtime: clear timerModifiedEarliest when last timer is deleted
+ 2022-07-13 923740a8cc cmd/compile: fix type assert in dict pass
+ 2022-07-12 bf2ef26be3 cmd/go: in script tests, avoid checking non-main packages for staleness
+ 2022-07-12 5f5cae7200 cmd/go: avoid indexing GOROOT packages when the compiler is 'gccgo'
+ 2022-07-12 c2edb2c841 cmd/go: port TestIssue16471 to a script test and add verbose logging
+ 2022-07-12 9c2526e637 cmd/go/internal/modfetch/codehost: add missing newline in '# lock' log message
+ 2022-07-12 85486bcccb image/jpeg: increase TestLargeImageWithShortData timeout by an order of magnitude
+ 2022-07-12 27794c4d4a cmd/go/internal/modload: ignore disallowed errors when checking for updates
+ 2022-07-12 b2b8872c87 compress/gzip: fix stack exhaustion bug in Reader.Read
+ 2022-07-12 ac68c6c683 path/filepath: fix stack exhaustion in Glob
+ 2022-07-12 fa2d41d0ca io/fs: fix stack exhaustion in Glob
+ 2022-07-12 6fa37e98ea encoding/gob: add a depth limit for ignored fields
+ 2022-07-12 695be961d5 go/parser: limit recursion depth
+ 2022-07-12 08c46ed43d encoding/xml: use iterative Skip, rather than recursive
+ 2022-07-12 c4c1993fd2 encoding/xml: limit depth of nesting in unmarshal
+ 2022-07-12 913d05133c cmd/go: avoid spurious readdir during fsys.Walk
+ 2022-07-12 d3d7998756 net/http: clarify that MaxBytesReader returns *MaxBytesError
+ 2022-07-11 126c22a098 syscall: gofmt after CL 412114
+ 2022-07-11 123a6328b7 internal/trace: don't report regions on system goroutines
+ 2022-07-11 846490110a runtime/race: update amd64 syso images to avoid sse4
+ 2022-07-11 b75ad09cae cmd/trace: fix typo in web documentation
+ 2022-07-11 7510e597de cmd/go: make module index loading O(1)
+ 2022-07-11 b8bf820d5d cmd/nm: don't rely on an erroneous install target in tests
+ 2022-07-11 ad641e8521 misc/cgo/testcarchive: don't rely on an erroneous install target in tests
+ 2022-07-11 bf5898ef53 net/url: use EscapedPath for url.JoinPath
+ 2022-07-11 398dcd1cf0 database/sql: make TestTxContextWaitNoDiscard test more robust
+ 2022-07-11 f956941b0f cmd/go: use package index for std in load.loadPackageData
+ 2022-07-11 59ab6f351a net/http: remove Content-Encoding in writeNotModified
+ 2022-07-08 c1a4e0fe01 cmd/compile: fix libfuzzer instrumentation line number
+ 2022-07-08 5c1a13e7a4 cmd/go: avoid setting variables for '/' and ':' in TestScript subprocess environments
+ 2022-07-08 180bcad33d net/http: wait for listeners to exit in Server.Close and Shutdown
+ 2022-07-08 14abe8aa73 cmd/compile: don't convert to interface{} for un-comparable types in generic switch
+ 2022-07-07 1ebc983000 runtime: overestimate the amount of allocated memory in heapLive
+ 2022-07-07 c177d9d98a crypto/x509: restrict CRL number to <=20 octets
+ 2022-07-07 486fc01770 crypto/x509: correctly parse CRL entry extensions
+ 2022-07-07 8ac58de185 crypto/x509: populate Number and AKI of parsed CRLs
+ 2022-07-07 0c7fcf6bd1 cmd/link: explicitly disable PIE for windows/amd64 -race mode
+ 2022-07-07 eaf2125654 cmd/go: default to "exe" build mode for windows -race
+ 2022-07-06 1243ec9c17 cmd/compile: only check implicit dots for method call enabled by a type bound
+ 2022-07-06 c391156f96 cmd/go: set up git identity for build_buildvcs_auto.txt
+ 2022-07-06 2acd3646fc cmd/compile: rework induction variable detector
+ 2022-07-06 53a4152d47 os/exec: clarify that Wait must be called
+ 2022-07-06 177306f630 cmd/internal/notsha256: add purego tag as needed
+ 2022-07-06 f4755fc733 cmd/dist: use purego tag when building the bootstrap binaries
+ 2022-07-06 4484c30f78 misc/cgo/test: make TestSetgidStress cheaper
+ 2022-07-06 2007599dc8 test: recognize new gofrontend error message
+ 2022-07-05 d602380f58 cmd/compile: drop "buildcfg" from no instrument packages
+ 2022-07-05 c111091071 cmd/go: make module@nonexistentversion failures reusable
+ 2022-07-05 5f305ae8e5 cmd/go: add -reuse flag to make proxy invocations more efficient
+ 2022-07-05 84e091eef0 cmd/go: record origin metadata during module download
+ 2022-07-04 ceda93ed67 build/constraint: update doc to mention a feature added in Go 1.17
+ 2022-07-04 3cf79d9610 runtime: pass correct string to exits on Plan 9
+ 2022-07-01 e822b1e26e net/http: omit invalid header value from error message
+ 2022-07-01 4a2a3bca18 cmd/go, go/build: clarify build constraint docs
+ 2022-07-01 9a4d5357f4 flag: highlight support for double dashes in docs
+ 2022-07-01 c847a2c9f0 go/types, types2: document that exported predicates are unspecified for invalid type arguments
+ 2022-06-30 405c269b85 go/types, types2: re-enable a couple of commented out tests
+ 2022-06-30 aad9382e59 go/doc/comment: support links in lists in comments
+ 2022-06-30 af725f4286 os: fix a typo in path_windows.go
Change-Id: I381728322188aca0bfa81a946d6aedda8c07903c
In filenames, macOS translates Ä (U+00c4, c3 84) to Ä (U+0041 U+0308, 41 cc 88).
This causes problems for run.go's crude rules for testing the compiler.
Fixes#53954.
Change-Id: I850421cbf07e022ca5ff8122e0fb4e80deb55adf
Reviewed-on: https://go-review.googlesource.com/c/go/+/418334
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
For type assertions, if src type is empty interface, we should
use normal type assertions rather than dynamic type assertions.
Fixes#53762
Change-Id: I596b2e4ad647fe5e42ad884f7273c78f8f50dac2
Reviewed-on: https://go-review.googlesource.com/c/go/+/416736
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Induction variable detection is still not quite right. I've added
another failing test.
Redo the overflow/underflow detector so it is more obviously correct.
Update #53600Fixes#53653Fixes#53663
Change-Id: Id95228e282fdbf6bd80b26e1c41d62e935ba08ff
Reviewed-on: https://go-review.googlesource.com/c/go/+/415874
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: David Chase <drchase@google.com>
The new gofrontend message matches other gofrontend error messages,
so adjust the test to accept it.
For #27938
For #51237
Change-Id: I29b536f83a0cf22b1dbdae9abc2f5f6cf21d522d
Reviewed-on: https://go-review.googlesource.com/c/go/+/416014
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Conflicts:
- test/run.go: textual conflict in 1.18 known failures list
Merge List:
+ 2022-06-30 993c387032 os: simplify deadline fluctuation tests
+ 2022-06-30 4914e4e334 cmd/go/internal/modindex: remove spurious field from index_format documentation
+ 2022-06-30 981d5947af cmd/go: include module root in package index key
+ 2022-06-30 84db00ffd1 cmd/go: add a 'sleep' command for script tests
+ 2022-06-30 31b8c23c57 cmd/compile: fix prove pass when upper condition is <= maxint
+ 2022-06-30 17083a2fdf spec: retitle section on "Assignments" to "Assignment statements"
+ 2022-06-30 4d95fe6653 test: add regress test for #53619
+ 2022-06-29 6a7c64fde5 debug/pe: add IMAGE_FILE_MACHINE_LOONGARCH{64,32}
+ 2022-06-29 b2cc0fecc2 net/http: preserve nil values in Header.Clone
+ 2022-06-29 64ef16e777 cmd/internal/obj/arm64: save LR and SP in one instruction for small frames
+ 2022-06-29 0750107074 go/token: use atomics not Mutex for last file cache
+ 2022-06-29 e5017a93fc net/http: don't strip whitespace from Transfer-Encoding headers
+ 2022-06-29 20760cff00 runtime: add race annotations to cbs.lock
+ 2022-06-29 e6c0546c54 crypto/x509/pkix: move crl deprecation message
+ 2022-06-29 3562977b6f cmd/internal/obj/mips,s390x,riscv: save LR after decrementing SP
+ 2022-06-29 d6481d5b96 runtime: add race annotations to metricsSema
+ 2022-06-29 bd1783e812 crypto/x509: improve RevocationList documentation
+ 2022-06-28 160414ca6a cmd/internal/obj/arm64: fix BITCON constant printing error
+ 2022-06-28 a30f434667 cmd/go: pass --no-decorate when listing git tags for a commit
+ 2022-06-28 3580ef9d64 os/exec: on Windows, suppress ErrDot if the implicit path matches the explicit one
+ 2022-06-28 34f3ac5f16 cmd/compile: fix generic inter-inter comparisons from value switch statements
+ 2022-06-28 7df0a002e6 cmd/go/internal/modfetch: cache latest revinfo in Versions func
+ 2022-06-28 d5bf9604aa test: add more tests for const decls with ommitted RHS expressions
+ 2022-06-28 533082d1a0 test: add test that gofrontend failed to compile
+ 2022-06-28 47e792e22e runtime: clean up unused function gosave on loong64
+ 2022-06-28 a6e5be0d30 cmd/go: omit build metadata that may contain system paths when -trimpath is set
+ 2022-06-28 d3ffff2790 api: correct debug/pe issue number for Go 1.19 changes
+ 2022-06-28 751cae8855 cmd/go/internal/modload: fix doc comment
+ 2022-06-28 85d7bab91d go/printer: report allocs and set bytes
+ 2022-06-27 3af5280c00 net: really skip Windows PTR tests if we say we are skipping them
+ 2022-06-27 a42573c2f1 net: avoid darwin/arm64 platform bug in TestCloseWrite
+ 2022-06-27 68289f39f0 html/template: fix typo in content_test.go
+ 2022-06-27 c3bea70d9b cmd/link: link against libsynchronization.a for -race on windows
+ 2022-06-27 f093cf90bf test: add test that caused gofrontend crash
+ 2022-06-27 155612a9b9 test: add test that caused gofrontend crash
+ 2022-06-27 a861eee51a cmd/go: compile runtime/internal/syscall as a runtime package
+ 2022-06-27 8f9bfa9b7b crypto/internal/boring: factor Cache into crypto/internal/boring/bcache
+ 2022-06-26 351e0f4083 runtime: avoid fma in mkfastlog2table
+ 2022-06-26 416c953960 test: add test that gofrontend gets wrong
+ 2022-06-26 666d736ecb cmd/compile: do branch/label checks only once
+ 2022-06-26 6b309be7ab cmd/compile/internal/syntax: check fallthrough in CheckBranches mode
+ 2022-06-25 1821639b57 runtime: mark string comparison hooks as no split
+ 2022-06-25 3b594b9255 io: clarify SeekEnd offset value
+ 2022-06-25 4f45ec5963 cmd/go: prepend builtin prolog when checking for preamble errors
+ 2022-06-24 41e1d9075e strconv: avoid panic on invalid call to FormatFloat
+ 2022-06-24 bd4753905d internal/trace: add Go 1.19 test data
+ 2022-06-24 6b6c64b1cc cmd/internal/archive: don't rely on an erroneous install target in tests
Change-Id: Ib43126833bf534c311730d4283d4d25381cd3428
This CL changes GOEXPERIMENT=unified to insert implicit conversions
for multi-valued expressions.
Unfortunately, IR doesn't have strong, first-class support for
multi-valued expressions, so this CL takes the approach of spilling
them to temporary variables, which can then be implicitly converted.
This is the same approach taken by walk, but doing it this early does
introduce some minor complications:
1. For select case clauses with comma-ok assignments (e.g., `case x,
ok := <-ch:`), the compiler middle end wants to see the OAS2RECV
assignment is the CommClause.Comm statement. So when constructing
select statements, we need to massage this around a little.
2. The extra temporary variables and assignments skew the existing
inlining heuristics. As mentioned, the temporaries/assignments will
eventually be added (and often optimized away again) anyway, but now
they're visible to the inliner. So this CL also kludges the inlining
heuristics in this case to keep things comparable.
Change-Id: I3e3ea756ad92472ebe28bae3963be61ed7684a75
Reviewed-on: https://go-review.googlesource.com/c/go/+/415244
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
A subsequent CL will change Unified IR to emit extra temporary
variables for multi-value expressions, because they're sometimes
necessary for handling implicit conversions.
A consequence of this is that:
_, ok := m[""]
will be rewritten into:
autotmp_1, autotmp_2 := m[""]
_, ok := autotmp_1, autotmp_2
As the comment in nilcheck.go says, we don't want this code sequence
to emit any nil checks, and it doesn't either way. But only the second
form results in the compiler reporting "removed nil check", and I
can't make sense of why.
Rather than splitting this test case into separate unified and
nounified variants, it seems easier to just tweak the test case to the
more complex form and verify that we correctly remove the nil check
still.
Change-Id: I6a9266db933b201352d52da4d403a330fdeac48b
Reviewed-on: https://go-review.googlesource.com/c/go/+/415242
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
The assignment `sink, *(&ok) = y.(int)` should (and does) escape a
value to the heap, but this detail is missed because the implicit
conversion of the multi-value expression `y.(int)` isn't visible to
escape analysis (because it's not inserted until desugaring during
walk).
For Unified IR, I plan to apply this desugaring earlier (because it's
necessary for correct dictionary handling), which means we'll
now (correctly) report the heap escape.
Due to limitations of the $GOROOT/test harness, the easiest way to
handle that GOEXPERIMENT=unified gets this right while
GOEXPERIMENT=nounified does not is to split the test case into
separate files. Hence this CL.
Change-Id: I91f3a6c015cbc646ab018747e152cac2874cf24c
Reviewed-on: https://go-review.googlesource.com/c/go/+/415241
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Unified IR will soon introduce additional temporary variables for
multi-valued expressions, which cause this test to start failing.
However, according to the comment on lines 594--596, we don't care
what temporaries are printed on the noisy lines, just that they're not
mentioned on the printnl lines.
This CL relaxes the test expectations so that temporaries are allowed
to be live at the call to fb38() too, not just the calls to fi38() and
fc38().
Change-Id: Ia6c5f28ccf760fd8890a4313fb0d9f0eb9850bba
Reviewed-on: https://go-review.googlesource.com/c/go/+/415240
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
When the terminating condition is <= X, we need to make sure that
X+step doesn't overflow.
Fixes#53600
Change-Id: I36e5384d05b4d7168e48db6094200fcae409bfe5
Reviewed-on: https://go-review.googlesource.com/c/go/+/415219
Reviewed-by: Than McIntosh <thanm@google.com>
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Works with cmd/compile, but fails with gccgo currently.
Updates #53619.
Change-Id: I787faa9584cc33bd851c9cc8f146c91f4eb36fc9
Reviewed-on: https://go-review.googlesource.com/c/go/+/415238
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
The Go 1.18 frontend ICEs on select case clauses that involve an
implicit conversion.
Change-Id: I1c0865bf97d8b0a8fbddb0da43333e909df0d38a
Reviewed-on: https://go-review.googlesource.com/c/go/+/414878
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
If value is a non-empty interface and has shape, we still need to
convert it to an interface{} first.
Fixes#53477
Change-Id: I516063ba4429a6cc24c483758387ec13815fc63e
Reviewed-on: https://go-review.googlesource.com/c/go/+/414834
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Add analogous tests to go/types and types2 test suites.
Make sure "assert" built-in is available in type-checker
tests.
For #49157.
For #53585.
Change-Id: I092901ecb43eb4833c09bd8f5e38efbe0285babe
Reviewed-on: https://go-review.googlesource.com/c/go/+/414795
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
For #51475
Change-Id: Ie1b27304687225194a323dc8305e5d62578fff4f
Reviewed-on: https://go-review.googlesource.com/c/go/+/414755
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
For #52871
Change-Id: Id6102222a8b1ec8a84b716425bed0e349c65dbc4
Reviewed-on: https://go-review.googlesource.com/c/go/+/414336
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
The gofrontend crashed importing a complex 0 constant.
For #52862
Change-Id: Ia87d8eadb9c5ddf51e1cd65c1a626f05f0d068d4
Reviewed-on: https://go-review.googlesource.com/c/go/+/413980
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
For #52856
Change-Id: Iab3e8352f64d774058391f0422cd01c53c3e711d
Reviewed-on: https://go-review.googlesource.com/c/go/+/414235
Reviewed-by: Robert Griesemer <gri@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Fixes#50788.
Change-Id: Id1ed7d9c0687e3005e28598373fd5634178c78ca
Reviewed-on: https://go-review.googlesource.com/c/go/+/413895
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
For #52846
Change-Id: I763f81def97b53277396c123c524f7b8193ea35e
Reviewed-on: https://go-review.googlesource.com/c/go/+/413694
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
We sometimes use 16-byte load+store to move values around in memory.
In rare circumstances, the loaded value must be spilled because the
store can't happen yet.
In that case, we need to be able to spill the 16-byte value.
Fixes#53454
Change-Id: I09fd08e11a63c6ba3ef781d3f5ede237e9b0132e
Reviewed-on: https://go-review.googlesource.com/c/go/+/413294
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
This test already passes for GOEXPERIMENT=unified; add regress test to
ensure it stays that way.
Updates #53477.
Change-Id: Ib7aa7428260595077052207899edcc044a6ab1c8
Reviewed-on: https://go-review.googlesource.com/c/go/+/413394
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: David Chase <drchase@google.com>
For unsafe.{Alignof,Offsetof,Sizeof}, subster will transform them them
to OLITERAL nodes, and discard their arguments. However, any closure in
their children nodes were already processed and added to declaration
queue. Thus, we lack of information for generating instantiation for
the closure.
To fix it, just skip substituting the closures if we are going to edit
the children nodes of unsafe builtins.
Fixes#53390
Change-Id: Ia815cd05af9dc0491f10faac4399f378ac53dec6
Reviewed-on: https://go-review.googlesource.com/c/go/+/412794
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This currently works with GOEXPERIMENT=unified. Add a regress test to
make sure it stays that way.
Updates #53419.
Change-Id: I2ea1f9039c59807fbd497d69a0420771f8d6d035
Reviewed-on: https://go-review.googlesource.com/c/go/+/413014
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Merge List:
+ 2022-06-16 635b1244aa cmd/go: pass GOEXPERIMENT through to subtests
+ 2022-06-16 ef808ae1d4 expvar: don't crash if map value set to nil
+ 2022-06-16 32510eea74 go/parser: remove unused method checkBinaryExpr
+ 2022-06-16 74f1fa6ecb cmd/go: parallelize matchPackages work in each module
+ 2022-06-16 1d9d99b7ce cmd/link: consider alignment in carrier symbol size calculation
+ 2022-06-16 bcce8ef498 spec: adjust incorrect sentence in section on rune literals
+ 2022-06-16 ecc268aa26 test: add test that gofrontend fails
+ 2022-06-15 b6c1606889 internal/goarch, internal/goos: update generators for syslist.go
+ 2022-06-15 91baf5cecc reflect: fix reference comment to runtime/map.go
+ 2022-06-15 0e3d0c9581 syscall: clarify Pdeathsig documentation on Linux
+ 2022-06-15 74bf90c779 go/types, types2: add test case for issue for coverage
+ 2022-06-15 0cd0c12f57 doc/go1.19: use matching closing tag in unix build constraint heading
+ 2022-06-15 97bfc77f38 syscall, runtime/internal/syscall: always zero the higher bits of return value on linux/loong64
+ 2022-06-15 937fa5000a net/netip: add missing ) in ParsePrefix errors
+ 2022-06-15 c2c76c6f19 cmd/link: set alignment for carrier symbols
+ 2022-06-15 36147dd1e8 cmd/go/internal/modindex: disable indexing for modules outside GOROOT and the module cache
+ 2022-06-15 2a78e8afc0 test: add tests for string/[]byte/[]rune conversions
+ 2022-06-15 f9c0264107 net: avoid infinite recursion in Windows Resolver.lookupTXT
+ 2022-06-14 0dffda1383 spec: clarify "slice of bytes" and "slice of runes" through examples
+ 2022-06-14 c22a6c3b90 reflect: when StructOf overflows computing size/offset, panic
+ 2022-06-14 e1e66a03a6 cmd/compile,runtime,reflect: move embedded bit from offset to name
+ 2022-06-14 cb9bf93078 cmd/go: quote package directory when calling glob
+ 2022-06-14 cad477c922 cpu: fix typos in test case
+ 2022-06-13 c29be2d41c runtime: add HACKING section on nosplit functions
+ 2022-06-13 c5be77b687 doc/go1.19: minor edits
+ 2022-06-13 56bc3098f4 sync: improve linearity test robustness
+ 2022-06-13 1fe2810f9c sync: move lock linearity test and treat it like a performance test
+ 2022-06-13 6130461149 internal/testmath: add two-sample Welch's t-test for performance tests
+ 2022-06-13 24b9039149 doc/go1.19: prefer relative links to other parts of the Go website
+ 2022-06-13 fbc75dff2f cmd/cgo: remove -fsanitize=hwaddress hardware tags
+ 2022-06-13 5ee939b819 spec: clarify behavior of map size hint for make built-in
+ 2022-06-13 4703546a29 spec: add missing optional type arguments after TypeName in syntax
+ 2022-06-13 2c52465cb3 net: avoid darwin_arm64 bug in TestDialParallelSpuriousConnection
+ 2022-06-13 9228d7d7d5 doc/go1.19: add a release note for module indexing
+ 2022-06-13 7eeec1f6e4 cmd/compile: fix missing dict pass for type assertions
+ 2022-06-13 d27128b065 doc/go1.19: fix crypto tags
+ 2022-06-10 55590f3a2b net/http: doc: update RFC reference for appropriate HTTP codes
+ 2022-06-10 ff3db8d12d doc: fix typos in Go memory model
+ 2022-06-10 fb75c2da91 cmd/dist, cmd/internal/metadata: don't install metadata binary
+ 2022-06-10 386245b68e runtime: fix stack split at bad time when fuzzing
+ 2022-06-09 2cfbef4380 cmd/cgo: recognize clang 14 DWARF type names
+ 2022-06-09 c7ccabf3fe runtime/cgo: retry _beginthread on EACCES
+ 2022-06-09 91019cc13d runtime/cgo: merge bodies of cgo_sys_thread_start on windows
+ 2022-06-09 840e99ed74 api: promote next to go1.19
+ 2022-06-09 1a2ca95ad2 go/types, types2: only set instance context if packages match
+ 2022-06-08 b51d44c6dd cmd/go/testdata/script: fix skip on list_replace_absolute_windows
+ 2022-06-08 80f86f706d api/next: minor reformat
+ 2022-06-08 13f6be2833 runtime: use pidleget for faketime jump
+ 2022-06-08 1292176bc9 cmd/go: clean paths before using them form index functions
+ 2022-06-08 1858ea5d85 syscall: remove unused setgroups on linux/loong64
+ 2022-06-08 bdde41e3ba runtime: skip TestGdbBacktrace on gdb bug
+ 2022-06-08 432158b69a net: fix testHookDialTCP race
+ 2022-06-08 899f0a29c7 cmd/go: enable module index by default
+ 2022-06-08 f862280e30 cmd/go: properly call PackageModuleRoot to get modroot for index
+ 2022-06-08 d65166024f cmd/go: set Root and target fields for packages in GOPATH
+ 2022-06-08 4afb0b9e53 doc/go1.19: delete remaining TODOs
+ 2022-06-08 3426b7201d runtime: gofmt
+ 2022-06-08 f330a3a987 doc/go1.19: complete most remaining TODOs
+ 2022-06-08 2882786bf4 runtime: remove unused pipe and setNonblock on linux/loong64
+ 2022-06-08 decdd87bea doc/go1.19: mention riscv64 supported regabi
+ 2022-06-07 b72a6a7b86 os: document that Chdir affects fs.FS returned by DirFS with a relative path
+ 2022-06-07 30b929b1ef syscall: remove unused accept on linux/loong64
+ 2022-06-07 a7551fe245 net: use synthetic network in TestDialParallel
+ 2022-06-07 19d71acd97 doc/go1.19: document that the assembler requires -p
+ 2022-06-07 d151134851 doc/go1.19: document linker CL that switches DWARF compressed section format
+ 2022-06-07 3507805bcd go/types, types2: better error message for invalid use of constraint type
+ 2022-06-07 269bf7e855 go/types, types2: better error message if type is not in type set
+ 2022-06-07 d4fb93be87 go/types, types2: use | rather than ∪ when printing term lists
+ 2022-06-07 346698eea7 doc/go1.19: add release notes for net/http and net/url
+ 2022-06-07 7a82c6859f doc/go1.19: adjust runtime release notes
+ 2022-06-07 f3e051a184 runtime: document GOMEMLIMIT in environment variables section
+ 2022-06-07 ef2567c7dd doc/go1.19: document loong64 port
+ 2022-06-07 69bb7c6ef5 sync/atomic: clarify that 8-byte alignment of variables is due to escape
+ 2022-06-07 81033fbd8e doc/go1.19: some platforms are still on TSAN v2
+ 2022-06-07 0c3a0543c2 doc/go1.19: compiler section is complete, modulo TODOs
+ 2022-06-07 835a946137 doc/go1.19: minor edits
+ 2022-06-07 429a4041eb doc/go1.19: complete TODOs for go/types
+ 2022-06-07 d2630aa4b2 doc/go1.19: add various crypto release notes
+ 2022-06-07 77d9252ddf runtime: fix inline assembly trampoline for arm64
+ 2022-06-07 38607c5538 cmd/link: specify -Wl,-z params as documented
+ 2022-06-07 95b68e1e02 doc/go1.19: delete boringcrypto TODO
+ 2022-06-07 a79623b019 doc/go1.19: add more TODOs from updated relnote
+ 2022-06-06 acfff42802 doc/go1.19: add release notes for the soft memory limit and idle GC
+ 2022-06-06 a71ca3dfbd runtime, sync, sync/atomic: document happens-before guarantees
+ 2022-06-06 3651a6117e go/doc/comment: add heuristics for common badly formatted comments
+ 2022-06-06 4c08260c51 doc/go_mem: update revision date
+ 2022-06-06 7271a0a287 doc/go1.19: gc requires -p=importpath
+ 2022-06-06 c1e2ecbaf9 doc/go1.19: document Resolver.PreferGo
+ 2022-06-06 11195c60e6 cmd/go: use index to match packages in dependency modules
+ 2022-06-06 ea5d7cbc26 all: boringcrypto post-merge cleanup
+ 2022-06-06 6c7b223c2b go/doc/comment: do not turn ``` into “`
+ 2022-06-06 ce757e94e0 go/doc/comment: add doc comment
+ 2022-06-06 95547aee8c cmd/compile: cast riscv64 rewrite shifts to unsigned int
+ 2022-06-06 d43ddc1f3f strconv: fix typo in atof.go
+ 2022-06-06 2fa45a4fcd cmd/link/internal/loadpe: handle _main reference properly
+ 2022-06-06 fc97075949 go/types, types2: simplify implementation of validType (fix TODO)
+ 2022-06-06 07eca49055 go/types, types2: use type nest to detect type cycles (fix validType)
+ 2022-06-06 770146d5a8 doc/go1.19: add TODOs for changes to go/types
+ 2022-06-06 1b8ca75eaa runtime: fix breakpoint in ppc64x
+ 2022-06-06 9ce28b518d text/template/parse: fix data race on lexer initialization
+ 2022-06-06 47e34ca533 go/types, types2: ensure that named types never expand infinitely
+ 2022-06-06 02e69cfa96 go/types, types2: store Named instance information separately
+ 2022-06-06 1323b0e8f0 go/types, types2: eliminate methodList in favor of just using Named.mu
+ 2022-06-06 846f971daa go/types, types2: remove Named.once in favor of monotonic state
+ 2022-06-06 66cbf67345 cmd/buildid: reject rewriting legacy buildids
+ 2022-06-04 47f806ce81 strconv: clarify ParseFloat accepts Go syntax for float literals
+ 2022-06-04 2730c6af9f runtime: fix typo in libfuzzer_arm64.s
+ 2022-06-04 a32a592c8c database/sql/driver: fix typo in driver.go
+ 2022-06-04 0293c51bc5 regexp: avoid copying each instruction executed
+ 2022-06-04 865911424d doc: update Go memory model
+ 2022-06-04 fc66cae490 doc/go1.19: remove TODO about LimitedReader
+ 2022-06-04 f8a53df314 io: revert: add an Err field to LimitedReader
+ 2022-06-04 21f05284c7 cmd/go: index standard library packages
Change-Id: Ia7595c77a555fd2a0e7bb3b6b2cfbb745bd4947b
For #52870
Change-Id: Ic0791af4283c9e426f7cbfab0514517ff84cfa80
Reviewed-on: https://go-review.googlesource.com/c/go/+/412535
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Unified IR records the inline nodes position right at the position of
the inline call, while the old inliner always records at the position of
the original nodes.
We want to keep non-unified working up through go 1.20, thus this CL
extract the inline test case that is different in Unified IR and the old
inliner.
Updates #53058
Change-Id: I14b0ee99fe797d34f27cfec068982790c64ac263
Reviewed-on: https://go-review.googlesource.com/c/go/+/411935
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Matches examples in spec section on string conversions.
For #23814.
Change-Id: I08099c27bfdb98735868266f5a42901321b97b56
Reviewed-on: https://go-review.googlesource.com/c/go/+/412095
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
This change moves test/locklinear.go into the sync package tests, and
adds a bit of infrastructure since there are other linearity-checking
tests that could benefit from it too. This infrastructure is also
different than what test/locklinear.go does: instead of trying really
hard to get at least one success, we instead treat this like a
performance test and look for a significant difference via a t-test.
This makes the methodology behind the tests more rigorous, and should
reduce flakiness as transient noise should produce an insignificant
result. A follow-up CL does more to make these tests even more robust.
For #32986.
Change-Id: I408c5f643962b70ea708930edb4ac9df1c6123ce
Reviewed-on: https://go-review.googlesource.com/c/go/+/411396
Reviewed-by: Michael Pratt <mpratt@google.com>
For type assertions, if either src or dst type has shape, we must
convert them to dynamic type assertions.
Fixes#53309
Change-Id: Ia3362fa67c011febcbdb5b26f856d081b5c366de
Reviewed-on: https://go-review.googlesource.com/c/go/+/411617
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
These two tests fail with the 1.18 compiler frontend, because of
incomplete dictionary support. This CL adds the tests for Unified IR,
which currently handles them correctly, to make sure it doesn't repeat
the same errors.
Updates #53276.
Updates #53328.
Change-Id: I9f436495d28f2bc5707a17bd2527c86abacf91f1
Reviewed-on: https://go-review.googlesource.com/c/go/+/411695
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
For constants literal, iimport/iexport read/write them as basic literal
nodes. So they are printed in diagnostic message as Go syntax. So "foo"
will be reported as string("foo").
Unified IR read/write the raw expression as string value, and when
printed in diagnostic, the string value is written out exactly as-is, so
"foo" will be written as "foo".
Thus, this CL relax the test in issue7921.go to match the string value only.
Updates #53058
Change-Id: I6fcf4fdcfc4b3be91cb53b081c48bd57186d8f35
Reviewed-on: https://go-review.googlesource.com/c/go/+/410795
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
CL 410343 changes Unified IR to visit LHS before RHS/X in assign/for
statement. Thus, it needs to set base.Pos before processing assignee
expression, so invalid type can be reported with correct position.
Updates #53058
Change-Id: Ic9f60cbf35c8bd71cb391e806396572c37811af7
Reviewed-on: https://go-review.googlesource.com/c/go/+/410794
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
For error reported during type size calculation, base.Pos needs to be
set, otherwise, the compiler will treat them as the same error and only
report once. Old typechecker and irgen all set base.Pos before
processing types, this CL do the same thing for unified IR.
Updates #53058
Change-Id: I686984ffe4aca3e8b14d2103018c8d3c7d71fb02
Reviewed-on: https://go-review.googlesource.com/c/go/+/410345
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
CL 333109 restore the diagnostic for irgen, now it's safe to restore for
Unified IR, too.
Updates #53058
Change-Id: I467902c0e9fa451aaa78cf0813231f14d9d7a3a0
Reviewed-on: https://go-review.googlesource.com/c/go/+/410346
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
So they can be formatted more presicely, and make it easier in the
transition to Unified IR.
Updates #53058
Change-Id: I8b5a46db05a2e2822289458995b8653f0a3ffbbe
Reviewed-on: https://go-review.googlesource.com/c/go/+/410594
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Unified IR uses to generate wrappers after the global inlining pass, so
it needs to apply inlining for the wrappers itself. However, inlining
may reveal new method value nodes which have not been seen yet, thus
unified IR never generates wrappers for them.
To fix it, just visiting the wrapper function body once more time after
inlining, and generate wrappers for any new method value nodes.
Fixes#52128
Change-Id: I78631c4faa0b00357d4f84704d3525fd38a52cd7
Reviewed-on: https://go-review.googlesource.com/c/go/+/410344
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
For instantiated generic functions, all implicit dot operations are
resolved. Thus unsafe.Offsetof may calculating the offset against the
wrong base selector.
To fix it, we must remove any implicit dot operations to find the first
non-implicit one, which is the right base selector for calculating the
offset.
Fixes#53137
Change-Id: I38504067ce0f274615b306edc8f7d7933bdb631a
Reviewed-on: https://go-review.googlesource.com/c/go/+/409355
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
As far as I can tell, this test suffers from #52433. For some reason,
this seems to become more of a problem on the windows/386 than anywhere
else. This CL is an attempt at a mitigation by slowing down the
allocation rate by inserting runtime.Gosched call in the inner loop. It
also cuts the iteration count which should help too (as less memory is
allocated in total), but the main motivation is to make sure the test
doesn't take too long to run.
Fixes#49564.
Change-Id: I8cc622b06a69cdfa66f680a30e1ccf334eea2164
Reviewed-on: https://go-review.googlesource.com/c/go/+/408825
Reviewed-by: Bryan Mills <bcmills@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
If a function type has no type parameters, note when it
is visited and do not recur. (It must be visited
at least once because of closures and their associated
types occurring in a generic context).
Fixes#51832.
Change-Id: Iee20612ffd0a03b838b9e59615f4a0206fc8940b
Reviewed-on: https://go-review.googlesource.com/c/go/+/406714
Reviewed-by: Keith Randall <khr@google.com>
The divisor must be non-zero for the rule to be triggered.
Fixes#53018
Change-Id: Id56b8d986945bbb66e13131d11264ee438de5cb2
Reviewed-on: https://go-review.googlesource.com/c/go/+/407655
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Auto-Submit: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Reviewed-by: xiaodong liu <teaofmoli@gmail.com>
Reviewed-by: WANG Xuerui <git@xen0n.name>
Contributors to the loong64 port are:
Weining Lu <luweining@loongson.cn>
Lei Wang <wanglei@loongson.cn>
Lingqin Gong <gonglingqin@loongson.cn>
Xiaolin Zhao <zhaoxiaolin@loongson.cn>
Meidan Li <limeidan@loongson.cn>
Xiaojuan Zhai <zhaixiaojuan@loongson.cn>
Qiyuan Pu <puqiyuan@loongson.cn>
Guoqi Chen <chenguoqi@loongson.cn>
This port has been updated to Go 1.15.6:
https://github.com/loongson/go
Updates #46229
Change-Id: I6760b4a7e51646773cd0f48baa1baba01b213b7d
Reviewed-on: https://go-review.googlesource.com/c/go/+/342325
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
A composite literal assignment
x = T{field: v}
may be compiled to
x = T{}
x.field = v
We already do not use this form is RHS uses LHS. If LHS is
address-taken, RHS may uses LHS implicitly, e.g.
v = &x.field
x = T{field: *v}
The lowering above would change the value of RHS (*v).
Fixes#52953.
Change-Id: I3f798e00598aaa550b8c17182c7472fef440d483
Reviewed-on: https://go-review.googlesource.com/c/go/+/407014
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Change-Id: I63eb42f3ce5ca452279120a5b33518f4ce16be45
GitHub-Last-Rev: a88f2f72be
GitHub-Pull-Request: golang/go#52951
Reviewed-on: https://go-review.googlesource.com/c/go/+/406843
Run-TryBot: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
For #51291
Change-Id: If47e4cbf899853ade5050852c3870b9500da4c63
Reviewed-on: https://go-review.googlesource.com/c/go/+/406916
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
CL 406358 added test that use -buildmode=plugin. But plugin mode only
supports on some os/arch pairs, so this CL moving the test to
misc/cgo/testplugin directory instead.
Updates #52937
Change-Id: Iad049443c1f6539f6af1988bebd4dff56c6e1bf9
Reviewed-on: https://go-review.googlesource.com/c/go/+/406774
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
CL 395854 made inline pass to not inlining function with shape params,
but pass no shape arguments. This is intended to be the reverse case of
CL 361260.
However, CL 361260 is using wider condition than necessary. Though it
only needs to check against function parameters, it checks whether the
function type has no shape. It does not cause any issue, because
!fn.Type().HasShape() implies !fn.Type().Params().HasShape().
But for the reverse case, it's not true. Function may have shape type,
but has no shape arguments. Thus, we must tighten the condition to
explicitly check against the function parameters only.
Fixes#52907
Change-Id: Ib87e87ff767c31d99d5b36aa4a6c1d8baf32746d
Reviewed-on: https://go-review.googlesource.com/c/go/+/406475
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Generic functions require instantiation, which package plugin doesn't
support, and likely never will. So instead, we can just skip writing
out any generic functions, which avoids an ICE in the plugin
generation code.
This issue doesn't affect GOEXPERIMENT=unified, because it avoids
leaking any non-instantiated types/functions to the rest of the
compiler backend.
Fixes#52937.
Change-Id: Ie35529c5c241e46b77fcb5b8cca48bb99ce7bfcb
Reviewed-on: https://go-review.googlesource.com/c/go/+/406358
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
This test is currently overly sensitive to compiler optimizations,
because inlining can affect the order in which cmd/link emits field
references. The order doesn't actually matter though, so this CL just
tweaks the test to sort the tracked fields before printing them.
Updates #51734.
Change-Id: I3b65ca265856b2e1102f40406d5ce34610c70d40
Reviewed-on: https://go-review.googlesource.com/c/go/+/406674
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Since CL 391014, cmd/compile now requires the -p flag to be set the
build system. This CL changes it to initialize LocalPkg.Path to the
provided path, rather than relying on writing out `"".` into object
files and expecting cmd/link to substitute them.
However, this actually involved a rather long tail of fixes. Many have
already been submitted, but a few notable ones that have to land
simultaneously with changing LocalPkg:
1. When compiling package runtime, there are really two "runtime"
packages: types.LocalPkg (the source package itself) and
ir.Pkgs.Runtime (the compiler's internal representation, for synthetic
references). Previously, these ended up creating separate link
symbols (`"".xxx` and `runtime.xxx`, respectively), but now they both
end up as `runtime.xxx`, which causes lsym collisions (notably
inittask and funcsyms).
2. test/codegen tests need to be updated to expect symbols to be named
`command-line-arguments.xxx` rather than `"".foo`.
3. The issue20014 test case is sensitive to the sort order of field
tracking symbols. In particular, the local package now sorts to its
natural place in the list, rather than to the front.
Thanks to David Chase for helping track down all of the fixes needed
for this CL.
Updates #51734.
Change-Id: Iba3041cf7ad967d18c6e17922fa06ba11798b565
Reviewed-on: https://go-review.googlesource.com/c/go/+/393715
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
CL 395854 made inline pass to not inlining function with shape params,
but pass no shape arguments. But it does not consider the case where
function has shape params, but passing zero arguments. In this case, the
un-safe interface conversion that may be applied to a shape argument can
not happen, so it's safe to inline the function.
Fixes#52907
Change-Id: Ifa7b23709bb47b97e27dc1bf32343d92683ef783
Reviewed-on: https://go-review.googlesource.com/c/go/+/406176
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This is the same fix as CL 36126, but for the reverse case, function
with shape params but passed no shape arg. The same conversion problem
may occur in this case, see details explanation there.
Fixes#51909Fixes#51925
Change-Id: Ib0c1973c7511d85b4918a252c80060f1864180cf
Reviewed-on: https://go-review.googlesource.com/c/go/+/395854
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
For #52841
Change-Id: If4723a70fba0dbedb5d1e70dab58f0b4612bf8b9
Reviewed-on: https://go-review.googlesource.com/c/go/+/405759
Auto-Submit: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
CL 391014 requires the compiler to be invoked with the -p flag, to
specify the package path. Later, CL 394217 makes the compiler to
produce an unlinkable object file, so "go tool compile x.go" can
still be used on the command line. This CL does the same for the
assembler, requiring -p, otherwise generating an unlinkable object.
No special case for the main package, as the main package cannot
be only assembly code, and there is no way to tell if it is the
main package from an assembly file.
Now we guarantee that we always have an expanded package path in
the object file. A later CL will delete the name expansion code
in the linker.
Change-Id: I8c10661aaea2ff794614924ead958d80e7e2487d
Reviewed-on: https://go-review.googlesource.com/c/go/+/404298
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The compiler use to compile f()(g()) as:
t1, t2 := g()
f()(t1, t2)
That violates the Go spec, since when "..., all function calls, ... are
evaluated in lexical left-to-right order"
This PR fixes the bug by compiling f()(g()) as:
t0 := f()
t1, t2 := g()
t0(t1, t2)
to make "f()" to be evaluated before "g()".
Fixes#50672
Change-Id: I6a766f3dfc7347d10f8fa3a151f6a5ea79bcf818
Reviewed-on: https://go-review.googlesource.com/c/go/+/392834
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
math/bits.Add64 and math/bits.Sub64 now lower and optimize
directly in SSA form.
The optimization of carry chains focuses around eliding
XER<->GPR transfers of the CA bit when used exclusively as an
input to a single carry operations, or when the CA value is
known.
This also adds support for handling XER spills in the assembler
which could happen if carry chains contain inter-dependencies
on each other (which seems very unlikely with practical usage),
or a clobber happens (SRAW/SRAD/SUBFC operations clobber CA).
With PPC64 Add64/Sub64 lowering into SSA and this patch, the net
performance difference in crypto/elliptic benchmarks on P9/ppc64le
are:
name old time/op new time/op delta
ScalarBaseMult/P256 46.3µs ± 0% 46.9µs ± 0% +1.34%
ScalarBaseMult/P224 356µs ± 0% 209µs ± 0% -41.14%
ScalarBaseMult/P384 1.20ms ± 0% 0.57ms ± 0% -52.14%
ScalarBaseMult/P521 3.38ms ± 0% 1.44ms ± 0% -57.27%
ScalarMult/P256 199µs ± 0% 199µs ± 0% -0.17%
ScalarMult/P224 357µs ± 0% 212µs ± 0% -40.56%
ScalarMult/P384 1.20ms ± 0% 0.58ms ± 0% -51.86%
ScalarMult/P521 3.37ms ± 0% 1.44ms ± 0% -57.32%
MarshalUnmarshal/P256/Uncompressed 2.59µs ± 0% 2.52µs ± 0% -2.63%
MarshalUnmarshal/P256/Compressed 2.58µs ± 0% 2.52µs ± 0% -2.06%
MarshalUnmarshal/P224/Uncompressed 1.54µs ± 0% 1.40µs ± 0% -9.42%
MarshalUnmarshal/P224/Compressed 1.54µs ± 0% 1.39µs ± 0% -9.87%
MarshalUnmarshal/P384/Uncompressed 2.40µs ± 0% 1.80µs ± 0% -24.93%
MarshalUnmarshal/P384/Compressed 2.35µs ± 0% 1.81µs ± 0% -23.03%
MarshalUnmarshal/P521/Uncompressed 3.79µs ± 0% 2.58µs ± 0% -31.81%
MarshalUnmarshal/P521/Compressed 3.80µs ± 0% 2.60µs ± 0% -31.67%
Note, P256 uses an asm implementation, thus, little variation is expected.
Change-Id: I88a24f6bf0f4f285c649e40243b1ab69cc452b71
Reviewed-on: https://go-review.googlesource.com/c/go/+/346870
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
This issue has been fixed in CL 403837.
Fixes#51840.
Change-Id: I282062bb06278696fe25e9ede333c64539dc964e
Reviewed-on: https://go-review.googlesource.com/c/go/+/404914
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
When a fully instantiated generic method is exported, be sure to also
export the types in its signature.
Fixes#52279.
Change-Id: Icc6bca05b01f914cf67faaf1bf184eaa5484f521
Reviewed-on: https://go-review.googlesource.com/c/go/+/405118
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Following CL 405114, the extension rule is also wrong. It is safe
to drop the extension if the value is from a boolean-generating
instruction, but not a boolean-typed Value in general (e.g. a Phi
or a in-register parameter). Fix it.
Updates #52788.
Change-Id: Icf3028fe8e90806f9f57fbe2b38d47da27a97e2a
Reviewed-on: https://go-review.googlesource.com/c/go/+/405115
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
On ARM64, an If block is lowered to (NZ cond yes no). This is
incorrect because cond is a boolean value and therefore only the
last byte is meaningful (same as AMD64, see ARM64Ops.go). But here
we are comparing a full register width with 0. Correct it by
comparing only the last bit.
Fixes#52788.
Change-Id: I2cacf9f3d2f45e149c361a290f511b2d4ed845c4
Reviewed-on: https://go-review.googlesource.com/c/go/+/405114
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
For this code:
z &= 63
_ = x<<z | x>>(64-z)
Now can prove 'x<<z' in bound. In ppc64 lowering pass, it will not
produce an extra '(ANDconst <typ.Int64> [63] z)' causing
codegen/rotate.go failed. Just remove the type check in rewrite rules
as the workaround.
Removes 32 bounds checks during make.bat.
Fixes#52563.
Change-Id: I14ed2c093ff5638dfea7de9bc7649c0f756dd71a
Reviewed-on: https://go-review.googlesource.com/c/go/+/404315
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: David Chase <drchase@google.com>
Auto-Submit: Keith Randall <khr@golang.org>
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
An invalid program may produce invalid types. If the program
calls unsafe.Sizeof on such a type, which is a compile-time
computation, the size-computation must be able to handle it.
Add the invalid type to the list of permissible basic types
and give it a size of 1 (word).
Fixes#52748.
Change-Id: I6c409628f9b77044758caf71cdcb199f9e77adea
Reviewed-on: https://go-review.googlesource.com/c/go/+/404894
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Noder pass will build a closure to implement generic function
instantiation which may produce `.dict` and `.rcvr` ident.
Since we allow `.dict` during exporting, we should allow `.rcvr` too.
Fixes#52241.
Change-Id: Ifc3912ba5155b5ac1887f20830da64f4fb3fceb6
Reviewed-on: https://go-review.googlesource.com/c/go/+/404314
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
For #52535
Change-Id: I6798a8379163497ebebcdadf836b8569735c282b
Reviewed-on: https://go-review.googlesource.com/c/go/+/404496
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Ian Lance Taylor <iant@google.com>
In walkCompare, any ir.OCONVNOP was removed from both operands. So when
constructing assignments for them to preserve any side-effects, using
temporary variables can cause type mismatched with original type.
Instead, using blank assignments will prevent that issue and still make
sure that the operands will be evaluated.
Fixes#52701
Change-Id: I229046acb154890bb36fe441d258563687fdce37
Reviewed-on: https://go-review.googlesource.com/c/go/+/403997
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Robert Griesemer <gri@google.com>
It is hit ~70k times building go.
This make the go binary, 0.04% smaller.
I didn't included benchmarks because this is just constant foldings
and is hard to mesure objectively.
For example, this enable rewriting things like:
if x == 20 {
return x + 30 + z
}
Into:
if x == 20 {
return 50 + z
}
It's not just fixing programer's code,
the ssa generator generate code like this sometimes.
Change-Id: I0861f342b27f7227b5f1c34d8267fa0057b1bbbc
GitHub-Last-Rev: 4c2f9b5216
GitHub-Pull-Request: golang/go#52669
Reviewed-on: https://go-review.googlesource.com/c/go/+/403735
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This shows up in a few crypto functions, and other
assorted places.
Change-Id: I5a7f4c25ddd4a6499dc295ef693b9fe43d2448ab
Reviewed-on: https://go-review.googlesource.com/c/go/+/404057
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
When we convert a type to a shaped interface type, we are not able
to recognize the itab. So passing the itab by dictionary as the
workaround.
Fixes#52026.
Change-Id: I75c23c7dd215daf9761dc24116a8af2c28c6d948
Reviewed-on: https://go-review.googlesource.com/c/go/+/401034
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
In #52529, we observed that checking types for duplicate fields and
methods during method collection can result in incorrect early expansion
of the base type. Fix this by delaying the check for duplicate fields.
Notably, we can't delay the check for duplicate methods as we must
preserve the invariant that added method names are unique.
After this change, it may be possible in the presence of errors to have
a type-checked type containing a method name that conflicts with a field
name. With the previous logic conflicting methods would have been
skipped. This is a change in behavior, but only for invalid code.
Preserving the existing behavior would likely require delaying method
collection, which could have more significant consequences.
As a result of this change, the compiler test fixedbugs/issue28268.go
started passing with types2, being previously marked as broken. The fix
was not actually related to the duplicate method error, but rather the
fact that we stopped reporting redundant errors on the calls to x.b()
and x.E(), because they are now (valid!) methods.
Fixes#52529
Change-Id: I850ce85c6ba76d79544f46bfd3deb8538d8c7d00
Reviewed-on: https://go-review.googlesource.com/c/go/+/403455
Reviewed-by: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
We need to use the same marker everywhere. My CL to rename the
marker (CL 241661) and the CL to add more uses of the marker
under the old name (CL 241678) weren't coordinated with each other.
Fixes#52612
Change-Id: I97023c0769e518491924ef457fe03bf64a2cefa6
Reviewed-on: https://go-review.googlesource.com/c/go/+/403094
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Accept ~x as ordinary unary expression in the parser but recognize
such expressions as invalid in the type checker.
This change opens the door to recognizing complex type constraint
literals such as `*E|~int` in `[P *E|~int]` and parse them correctly
instead of reporting a parse error because `P*E|~int` syntactically
looks like an incorrect array length expression (binary expression
where the RHS of | is an invalid unary expression ~int).
As a result, the parser is more forgiving with expressions but the
type checker will reject invalid uses as before.
We could pass extra information into the binary/unary expression
parse functions to prevent the use of ~ in invalid situations but
it doesn't seem worth the trouble. In fact it may be advantageous
to allow a more liberal expression syntax especially in the presence
of errors (better parser synchronization after an error).
Preparation for fixing #49482.
Change-Id: I119e8bd9445dfa6460fcd7e0658e3554a34b2769
Reviewed-on: https://go-review.googlesource.com/c/go/+/402255
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Change-Id: Ia0a4be56d4e1fbfc73e6ce24f01a658c89a74adb
GitHub-Last-Rev: dd95e50c4b
GitHub-Pull-Request: golang/go#52393
Reviewed-on: https://go-review.googlesource.com/c/go/+/400694
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
This CL exports the existing ir.UintptrKeepAlive via the new directive
//go:uintptrkeepalive. This makes the compiler insert KeepAlives for
pointers converted to uintptr in calls, keeping them alive for the
duration of the call.
//go:uintptrkeepalive requires //go:nosplit, as stack growth can't
handle these arguments (it cannot know which are pointers). We currently
check this on the immediate function, but the actual restriction applies
to all transitive calls.
The existing //go:uintptrescapes is an extension of
//go:uintptrkeepalive which forces pointers to escape to the heap, thus
eliminating the stack growth issue.
This pragma is limited to the standard library.
For #51087
Change-Id: If9a19d484d3561b4219e5539b70c11a3cc09391e
Reviewed-on: https://go-review.googlesource.com/c/go/+/388095
Run-TryBot: Michael Pratt <mpratt@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
CL 388095 will change this file significantly. Move it preemptively to
ensure git tracks the move properly.
For #51087
Change-Id: I1408aecf8675723041b64e54cf44cdec38cc655c
Reviewed-on: https://go-review.googlesource.com/c/go/+/388094
Run-TryBot: Michael Pratt <mpratt@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Fixes#52438.
Change-Id: I5cbf8c448dba037e9e0c5fe8f209401d6bf7d43f
Reviewed-on: https://go-review.googlesource.com/c/go/+/401134
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
The linker performs a global analysis of all nosplit call chains to
check they fit in the stack space ensured by splittable functions.
That analysis has two problems right now:
1. It's inefficient. It performs a top-down analysis, starting with
every nosplit function and the nosplit stack limit and walking *down*
the call graph to compute how much stack remains at every call. As a
result, it visits the same functions over and over, often with
different remaining stack depths. This approach is historical: this
check was originally written in C and this approach avoided the need
for any interesting data structures.
2. If some call chain is over the limit, it only reports a single call
chain. As a result, if the check does fail, you often wind up playing
whack-a-mole by guessing where the problem is in the one chain, trying
to reduce the stack size, and then seeing if the link works or reports
a different path.
This CL completely rewrites the nosplit stack check. It now uses a
bottom-up analysis, computing the maximum stack height required by
every function's call tree. This visits every function exactly once,
making it much more efficient. It uses slightly more heap space for
intermediate storage, but still very little in the scheme of the
overall link. For example, when linking cmd/go, the new algorithm
virtually eliminates the time spent in this pass, and reduces overall
link time:
│ before │ after │
│ sec/op │ sec/op vs base │
Dostkcheck 7.926m ± 4% 1.831m ± 6% -76.90% (p=0.000 n=20)
TotalTime 301.3m ± 1% 296.4m ± 3% -1.62% (p=0.040 n=20)
│ before │ after │
│ B/op │ B/op vs base │
Dostkcheck 40.00Ki ± 0% 212.15Ki ± 0% +430.37% (p=0.000 n=20)
Most of this time is spent analyzing the runtime, so for larger
binaries, the total time saved is roughly the same, and proportionally
less of the overall link.
If the new implementation finds an error, it redoes the analysis,
switching to preferring quality of error reporting over performance.
For error reporting, it computes stack depths top-down (like the old
algorithm), and reports *all* paths that are over the stack limit,
presented as a tree for compactness. For example, this is the output
from a simple test case from test/nosplit with two over-limit paths
from f1:
main.f1: nosplit stack overflow
main.f1
grows 768 bytes, calls main.f2
grows 56 bytes, calls main.f4
grows 48 bytes
80 bytes over limit
grows 768 bytes, calls main.f3
grows 104 bytes
80 bytes over limit
While we're here, we do a few nice cleanups:
- We add a debug output flag, which will be useful for understanding
what our nosplit chains look like and which ones are close to
running over.
- We move the implementation out of the fog of lib.go to its own file.
- The implementation is generally more Go-like and less C-like.
Change-Id: If1ab31197f5215475559b93695c44a01bd16e276
Reviewed-on: https://go-review.googlesource.com/c/go/+/398176
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The nosplit test was originally written when the stack limit was a
mere 128 bytes. Now it's much larger, but rather than rewriting all of
the tests, we apply a hack to just add the extra space into the stack
frames of the existing tests.
Unfortunately, we add it in the wrong place. The extra space should be
added just once per chain of nosplit functions, but instead we add it
to every frame that appears first on a line in the test's little
script language. This means that for tests like
start 0 call f1
f1 16 nosplit call f2
f2 16 nosplit call f3
f3 16 nosplit call f4
f4 16 nosplit call f5
f5 16 nosplit call f6
f6 16 nosplit call f7
f7 16 nosplit call f8
f8 16 nosplit call end
end 1000
REJECT
we add 672 bytes to *every* frame, meaning that we wind up way over
the stack limit by the end of the stanza, rather than just a little as
originally intended.
Fix this by instead adding the extra space to the first nosplit
function in a stanza. This isn't perfect either, since we could have a
nosplit -> split -> nosplit chain, but it's the best we can do without
a graph analysis.
Change-Id: Ibf156c68fe3eb1b64a438115f4a17f1a6c7e2bd1
Reviewed-on: https://go-review.googlesource.com/c/go/+/398174
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
So that the inliner knows all the other cases are dead and doesn't
accumulate any cost for them.
The canonical case for this is switching on runtime.GOOS, which occurs
several places in the stdlib.
Fixes#50253
Change-Id: I44823aaebb6c1b03c9b0c12d10086db81954350f
Reviewed-on: https://go-review.googlesource.com/c/go/+/399694
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
runtime.getitab need filled fun[0] to identify whether
implemented the interface.
Fixes#51700Fixes#52228
Change-Id: I0173b98f4e1b45e3a0183a5b60229d289140d1e6
Reviewed-on: https://go-review.googlesource.com/c/go/+/399058
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Auto-Submit: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: David Chase <drchase@google.com>
gofmt is rewriting +build comments into //go:build anyway, so update
the test script to support both.
Change-Id: Ia6d950cfaa2fca9f184b8b2d3625a551bff88dde
Reviewed-on: https://go-review.googlesource.com/c/go/+/399794
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
After CL 398014 fixed a compiler deadlock on syntax errors,
this CL adds a test case and more details for that.
How it was fixed:
CL 57751 introduced a channel "sem" to limit the number of
simultaneously open files.
Unfortunately, when the number of syntax processing goroutines
exceeds this limit, will easily trigger deadlock.
In the original implementation, "sem" only limited the number
of open files, not the number of concurrent goroutines, which
will cause extra goroutines to block on "sem". When the p.err
of the following iteration happens to be held by the blocking
goroutine, it will fall into a circular wait, which is a deadlock.
CL 398014 fixed the above deadlock, also see issue #52127.
First, move "sem <- struct{}{}" to the outside of the syntax
processing goroutine, so that the number of concurrent goroutines
does not exceed the number of open files, to ensure that all
goroutines in execution can eventually write to p.err.
Second, move the entire syntax processing logic into a separate
goroutine to avoid blocking on the producer side.
Change-Id: I1bb89bfee3d2703784f0c0d4ded82baab2ae867a
Reviewed-on: https://go-review.googlesource.com/c/go/+/399054
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Fixes#52278
Change-Id: Ibf67c7b019feec277d316e04d93b458efea133fb
Reviewed-on: https://go-review.googlesource.com/c/go/+/399574
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Auto-Submit: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
In the load tests, we only want to test the assembly produced by
the load operations. If we use the global variable sink, it will produce
one load operation and one store operation(assign to sink).
For example:
func load_be64(b []byte) uint64 {
sink64 = binary.BigEndian.Uint64(b)
}
If we compile this function with GOAMD64=v3, it may produce MOVBEQload
and MOVQstore or MOVQload and MOVBEQstore, but we only want MOVBEQload.
Discovered when developing CL 395474.
Same for the store tests.
Change-Id: I65c3c742f1eff657c3a0d2dd103f51140ae8079e
Reviewed-on: https://go-review.googlesource.com/c/go/+/397875
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Cherry Mui <cherryyz@google.com>
With this change, the shift checking code matches the corresponding
go/types code, but for the differences in the internal error reporting,
and call of check.overflow.
The change leads to the recording of an untyped int value if the RHS
of a non-constant shift is an untyped integer value. Adjust the type
in the compiler's irgen accordingly. Add test/shift3.go to verify
behavior.
Change-Id: I20386fcb1d5c48becffdc2203081fb70c08b282d
Reviewed-on: https://go-review.googlesource.com/c/go/+/398236
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
The SHRX/SHLX instruction can take any general register as the shift count operand, and can read source from memory. This CL introduces some operators to combine load and shift to one instruction.
For #47120
Change-Id: I13b48f53c7d30067a72eb2c8382242045dead36a
Reviewed-on: https://go-review.googlesource.com/c/go/+/385174
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Cherry Mui <cherryyz@google.com>
LZCNT is similar to BSR, but BSR(x) is undefined when x == 0, so using
LZCNT can avoid a special case for zero input. Except that case,
LZCNTQ(x) == 63-BSRQ(x) and LZCNTL(x) == 31-BSRL(x).
And according to https://www.agner.org/optimize/instruction_tables.pdf,
LZCNT instructions are much faster than BSR on AMD CPU.
name old time/op new time/op delta
LeadingZeros-8 0.91ns ± 1% 0.80ns ± 7% -11.68% (p=0.000 n=9+9)
LeadingZeros8-8 0.98ns ±15% 0.91ns ± 1% -7.34% (p=0.000 n=9+9)
LeadingZeros16-8 0.94ns ± 3% 0.92ns ± 2% -2.36% (p=0.001 n=10+10)
LeadingZeros32-8 0.89ns ± 1% 0.78ns ± 2% -12.49% (p=0.000 n=10+10)
LeadingZeros64-8 0.92ns ± 1% 0.78ns ± 1% -14.48% (p=0.000 n=10+10)
Change-Id: I125147fe3d6994a4cfe558432780408e9a27557a
Reviewed-on: https://go-review.googlesource.com/c/go/+/396794
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
Run-TryBot: Emmanuel Odeke <emmanuel@orijtech.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This CL add MOVBE support for 16-bit version, but MOVBEWload is
excluded because it does not satisfy zero extented.
For #51724
Change-Id: I3fadf20bcbb9b423f6355e6a1e340107e8e621ac
Reviewed-on: https://go-review.googlesource.com/c/go/+/396617
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
The -G compiler option doesn't exist anymore. Update some variable
names and comments to reflect the new reality.
Change-Id: I227e9c59a01615c3a40c3869102e8045cb012980
Reviewed-on: https://go-review.googlesource.com/c/go/+/397254
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
For syntax errors in various (syntactic) lists, instead of reporting
a set of "expected" tokens (which may be incomplete), provide context
and mention "possibly missing" tokens. The result is a friendlier and
more accurate error message.
Fixes#49205.
Change-Id: I38ae7bf62febfe790075e62deb33ec8c17d64476
Reviewed-on: https://go-review.googlesource.com/c/go/+/396914
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When parsing method declarations in an interface, the parser has
for historic reasons gracefully handled a list of method names with
a single (common) signature, and then reported an error. For example
interface {
m1, m2, m3 (x int)
}
This code originally came from the very first parser for Go which
initially permitted such declarations (or at least assumed that
people would write such declarations). Nobody is doing this at this
point, so there's no need for being extra careful here. Remove the
respective code and adjust the corresponding test.
Change-Id: If6f9b398bbc9e425dcd4328a80d8bf77c37fe8b6
Reviewed-on: https://go-review.googlesource.com/c/go/+/396654
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 367755 added soleComponent for handling 1-byte type interface conversion.
This implementation must be kept in sync with Type.SoleComponent, but it
does not. When seeing a blank field in struct, we must continue looking
at the field type to find sole component, if any. The current code just
terminate immediately, which causes wrong sole component type returned.
Fixes#52020
Change-Id: I4f506fe094fa7c5532de23467a4f9139476bb0a4
Reviewed-on: https://go-review.googlesource.com/c/go/+/396614
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Use the 1.17 compiler error message, sans "array" prefix.
Change-Id: I0e70781c5ff02dca30a2004ab4d0ea82b0849eae
Reviewed-on: https://go-review.googlesource.com/c/go/+/396296
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
CL 394074 broke the noopt builder. Something about time.After's inlining
depends on the build flags to make.bash, not the build flags that run.go
passes.
Change-Id: Ib284c66ea2008a4d32829c055d57c54a34ec3fb4
Reviewed-on: https://go-review.googlesource.com/c/go/+/396037
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Historically, we sometimes recorded imports based on either package
path ("net/http") or object file path ("net/http.a"). But modern Go
build systems always use package path, and the extra ".a" suffix
doesn't mean anything anyway.
Change-Id: I6060ef8bafa324168710d152a353f4d8db062133
Reviewed-on: https://go-review.googlesource.com/c/go/+/395254
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Add a new rewrite rule to merge ANDconst and UBFX into
UBFX.
Add test cases.
Change-Id: I24d6442d0c956d7ce092c3a3858d4a3a41771670
Reviewed-on: https://go-review.googlesource.com/c/go/+/377054
Trust: Fannie Zhang <Fannie.Zhang@arm.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This CL updates test/run.go to compile xxx.dir/x.go with a package
path of "test/x" instead of just "x". This prevents collisions with
standard library packages.
It also requires updating a handful of tests to account for the
updated package paths.
Fixes#25693.
Change-Id: I49208c56ab3cb229ed667d547cd6e004d2175fcf
Reviewed-on: https://go-review.googlesource.com/c/go/+/395258
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
CL 187617 removed oldescape_linkname.go, but forgot to remove this
directory too.
Change-Id: I6d208c4d96d636b3df93adec1ee22fe1d4f5f61d
Reviewed-on: https://go-review.googlesource.com/c/go/+/395259
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
bug302 compiles p.go with -p=p, and then manually creates a pp.a
archive, and imports it as both "p" and "pp". This is a misuse of
cmd/compile's -p flag, and it isn't representative of how any actual
Go build systems work anyway.
This test made sense back when cmd/compile still wrote out bare object
files, which was then split into separate __.PKGDEF and _go_.o archive
entries when added to a pack archive. But since CL 102236, cmd/compile
always writes out pack files.
Updates #51734.
Change-Id: I4b5de22d348ecc0a72c98b512351c2d267c77736
Reviewed-on: https://go-review.googlesource.com/c/go/+/393896
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently, run.go's *dir tests allow "x.go" to be imported
interchangeably as either "x" or "./x". This is generally fine, but
can cause problems when "x" is the name of a standard library
package (e.g., "fixedbugs/bug345.dir/io.go").
This CL is an automated rewrite to change all `import "x"` directives
to use `import "./x"` instead. It has no effect today, but will allow
subsequent CLs to update test/run.go to resolve "./x" to "test/x" to
avoid stdlib collisions.
Change-Id: Ic76cd7140e83b47e764f8a499e59936be2b3c876
Reviewed-on: https://go-review.googlesource.com/c/go/+/395116
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The importer type param index used package name type parameter key,
causing type parameters to be reused/overwritten if two packages in the
import graph had the same combination of (name, declaration name, type
parameter name).
Fix this by instead using the *Package in the key.
Fixes#51836
Change-Id: I881ceaf3cf7c1ab4e0835962350feb552e79b233
Reviewed-on: https://go-review.googlesource.com/c/go/+/394219
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
First law of cmd/compile frontend development: thou shalt not rely on
types.Sym.
This CL replaces Type.OrigSym with Type.OrigType, which semantically
matches what all of the uses within the frontend actually care about,
and avoids using types.Sym, which invariably leads to mistakes because
symbol scoping in the frontend doesn't work how anyone intuitively
expects it to.
Fixes#51765.
Change-Id: I4affe6ee0718103ce5006ab68aa7e1bb0cac6881
Reviewed-on: https://go-review.googlesource.com/c/go/+/394274
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
CL 342350 fixed deadcode panic with dead hidden closures. However, a
closure may contains nested dead hidden closures, so we need to mark
them dead as well.
Fixes#51839
Change-Id: Ib54581adfc1bdea60e74d733cd30fd8e783da983
Reviewed-on: https://go-review.googlesource.com/c/go/+/394079
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
They should not share a shape with regular pointers. We could coalesce
multiple pointer-to-not-in-heap types, but doesn't seem worth it - just
make them fully stenciled.
Fixes#51733
Change-Id: Ie8158177226fbc46a798e71c51897a82f15153df
Reviewed-on: https://go-review.googlesource.com/c/go/+/393895
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
CL 338129 added getDictionaryType to get the dictionary type from the
specified dict param, but still using the one in info.dictParam, which
is wrong.
Fixes#51413
Change-Id: Ie13460c1e5751c4c5fc44479a44f6eed8b3b06e4
Reviewed-on: https://go-review.googlesource.com/c/go/+/391994
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
For hidden closure built during stenciling to implement a function
instantiation, the function may come from other package, not local
package, which causes the ICE for code that re-export the hidden closure
after inlining.
To fix it, use the closure package for export writer when writing out
the closure itself.
Fixes#51423
Change-Id: I23b067ba14e2d602a0fc3b2e99bd9317afbe53ff
Reviewed-on: https://go-review.googlesource.com/c/go/+/391574
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Both the thing we're switching on, as well as the cases we're switching for.
Convert anything containing a type parameter to interface{} before the
comparison happens.
Fixes#51522
Change-Id: I97ba9429ed332cb7d4240cb60f46d42226dcfa5f
Reviewed-on: https://go-review.googlesource.com/c/go/+/391594
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
At this point in stenciling, we have shape types, not raw type parameters.
The code was correct in the other part of this function.
Update #51522
Change-Id: Ife495160a2be5f6af5400363c3efb68dda518b5f
Reviewed-on: https://go-review.googlesource.com/c/go/+/391475
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The -p flag specifies the import path of the package being compiled.
This CL makes it required when invoking the compiler and
adjusts tests that invoke the compiler directly to conform to this
new requirement. The go command already passes the flag, so it
is unmodified in this CL. It is expected that any other Go build systems
also already pass -p, or else they will need to arrange to do so before
updating to Go 1.19. Of particular note, Bazel already does for rules
with an importpath= attribute, which includes all Gazelle-generated rules.
There is more cleanup possible now in cmd/compile, cmd/link,
and other consumers of Go object files, but that is left to future CLs.
Additional historical background follows but can be ignored.
Long ago, before the go command, or modules, or any kind of
versioning, symbols in Go archive files were named using just the
package name, so that for example func F in math/rand and func F in
crypto/rand would both be the object file symbol 'rand.F'. This led to
collisions even in small source trees, which made certain packages
unusable in the presence of other packages and generally was a problem
for Go's goal of scaling to very large source trees.
Fixing this problem required changing from package names to import
paths in symbol names, which was mostly straightforward. One wrinkle,
though, is that the compiler did not know the import path of the
package being compiled; it only knew the package name. At the time,
there was no go command, just Makefiles that people had invoking 6g
(now “go tool compile”) and then copying the resulting object file to
an importable location. That is, everyone had a custom build setup for
Go, because there was no standard one. So it was not particularly
attractive to change how the compiler was invoked, since that would
break approximately every Go user at the time. Instead, we arranged
for the compiler to emit, and other tools reading object files to
recognize, a special import path (the empty string, it turned out)
denoting “the import path of this object file”. This worked well
enough at the time and maintained complete command-line compatibility
with existing Go usage.
The changes implementing this transition can be found by searching
the Git history for “package global name space”, which is what they
eliminated. In particular, CL 190076 (a6736fa4), CL 186263 (758f2bc5),
CL 193080 (1cecac81), CL 194053 (19126320), and CL 194071 (531e6b77)
did the bulk of this transformation in January 2010.
Later, in September 2011, we added the -p flag to the compiler for
diagnostic purposes. The problem was that it was easy to create import
cycles, especially in tests, and these could not be diagnosed until
link time. You'd really want the compiler to diagnose these, for
example if the compilation of package sort noticed it was importing a
package that itself imported "sort". But the compilation of package
sort didn't know its own import path, and so it could not tell whether
it had found itself as a transitive dependency. Adding the -p flag
solved this problem, and its use was optional, since the linker would
still diagnose the import cycle in builds that had not updated to
start passing -p. This was CL 4972057 (1e480cd1).
There was still no go command at this point, but when we introduced
the go command we made it pass -p, which it has for many years at this
point.
Over time, parts of the compiler began to depend on the presence of
the -p flag for various reasonable purposes. For example:
In CL 6497074 (041fc8bf; Oct 2012), the race detector used -p to
detect packages that should not have race annotations, such as
runtime/race and sync/atomic.
In CL 13367052 (7276c02b; Sep 2013), a bug fix used -p to detect the
compilation of package reflect.
In CL 30539 (8aadcc55; Oct 2016), the compiler started using -p to
identify package math, to be able to intrinsify calls to Sqrt inside
that package.
In CL 61019 (9daee931; Sep 2017), CL 71430 (2c1d2e06; Oct 2017), and
later related CLs, the compiler started using the -p value when
creating various DWARF debugging information.
In CL 174657 (cc5eaf93; May 2019), the compiler started writing
symbols without the magic empty string whenever -p was used, to reduce
the amount of work required in the linker.
In CL 179861 (dde7c770; Jun 2019), the compiler made the second
argument to //go:linkname optional when -p is used, because in that
case the compiler can derive an appropriate default.
There are more examples. Today it is impossible to compile the Go
standard library without using -p, and DWARF debug information is
incomplete without using -p.
All known Go build systems pass -p. In particular, the go command
does, which is what nearly all Go developers invoke to build Go code.
And Bazel does, for go_library rules that set the importpath
attribute, which is all rules generated by Gazelle.
Gccgo has an equivalent of -p and has required its use in order to
disambiguate packages with the same name but different import paths
since 2010.
On top of all this, various parts of code generation for generics
are made more complicated by needing to cope with the case where -p
is not specified, even though it's essentially always specified.
In summary, the current state is:
- Use of the -p flag with cmd/compile is required for building
the standard library, and for complete DWARF information,
and to enable certain linker speedups.
- The go command and Bazel, which we expect account for just
about 100% of Go builds, both invoke cmd/compile with -p.
- The code in cmd/compile to support builds without -p is
complex and has become more complex with generics, but it is
almost always dead code and therefore not worth maintaining.
- Gccgo already requires its equivalent of -p in any build
where two packages have the same name.
All this supports the change in this CL, which makes -p required
and adjusts tests that invoke cmd/compile to add -p appropriately.
Future CLs will be able to remove all the code dealing with the
possibility of -p not having been specified.
Change-Id: I6b95b9d4cffe59c7bac82eb273ef6c4a67bb0e43
Reviewed-on: https://go-review.googlesource.com/c/go/+/391014
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This is a feature that is not understood well enough and may have
subtle repercussions impacting future changes. Disable for Go 1.18.
The actual change is trivial: disable a branch through a flag.
The remaining changes are adjustments to tests.
Fixes#51576.
Change-Id: Ib77b038b846711a808315a8889b3904e72367bce
Reviewed-on: https://go-review.googlesource.com/c/go/+/391135
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
If you attempt to instantiate a generic type or func and run 'go build'
with a language version < 1.18 in the 'go' directive inside the go.mod
file, cmd/compile emits a friendly message that includes the suggestion
to 'check go.mod':
type instantiation requires go1.18 or later (-lang was set to go1.17; check go.mod)
However, if the code instead only declares a generic type or func
without instantiating, cmd/compile currently emits a less friendly
message:
type parameters require go1.18 or later
With this CL, the error in that situation becomes:
type parameter requires go1.18 or later (-lang was set to go1.17; check go.mod)
Within cmd/compile/internal/types2, it already calls check.versionErrorf
in a dozen or so places, including three existing calls to
check.versionErrorf within typeset.go (e.g., for embedding a constraint
interface).
This CL adds two more calls to check.versionErrorf, replacing calls to
check.softErrorf. Both check.versionErrorf and check.softErrorf call
check.err(at, <string>, true) after massaging the string message.
Fixes#51531
Change-Id: If54e179f5952b97701d1dfde4abb08101de07811
GitHub-Last-Rev: b0b7c1346f
GitHub-Pull-Request: golang/go#51536
Reviewed-on: https://go-review.googlesource.com/c/go/+/390578
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Robert Findley <rfindley@google.com>
Inference for type instances has dependencies on type-checking order
that can lead to subtle bugs. As explained in #51527, disable it for
1.18.
Fixes#51527
Change-Id: I42795bad30ce53abecfc5a4914599ae5a2041a9e
Reviewed-on: https://go-review.googlesource.com/c/go/+/387934
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Now that we always use types2 to validate user source code, we can
remove the constSet logic from typecheck for detecting duplicate
expression switch cases and duplicate map literal keys. This logic is
redundant with types2, and currently causes unified IR to report
inappropriate duplicate constant errors that only appear after type
substitution.
Updates #42758.
Change-Id: I51ee2c5106eec9abf40eba2480dc52603c68ba21
Reviewed-on: https://go-review.googlesource.com/c/go/+/390474
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The test case is already working with unified IR, so add it to make
sure we don't regress while finishing unified IR's support for
dictionaries.
Updates #51521.
Change-Id: Ib7c8bf9612d30cd552e8e631fd0d487dcb177f14
Reviewed-on: https://go-review.googlesource.com/c/go/+/390356
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
None of the current generic type switch test cases exercise type
switches where the instantiated case is an interface type.
Change-Id: I9272fa61b8dde1fe1a3702d524d4f40253ef19b2
Reviewed-on: https://go-review.googlesource.com/c/go/+/390354
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
This CL switches unified IR to using ir.DynamicType for derived
types. This has an immediate effect of fixing compilation of generic
code that when fully stenciled results in statically invalid type
assertions. This does require updating typecheck to expect
ODYNAMICTYPE in type switches, but this is straightforward to
implement.
For now, we still statically resolve the runtime type (or itab)
pointer. However, a subsequent CL will allow reading these pointers
from the runtime dictionary.
Change-Id: I1666678fcc588bc9cb8b97871bd02b9059848e6d
Reviewed-on: https://go-review.googlesource.com/c/go/+/390336
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
We shouldn't need to read in function bodies for new functions found
during inlining, but something is expecting them to still be read
in. We should fix that code to not depend on them being read in, but
in the mean time reading them in anyway is at least correct, albeit
less efficient in time and space.
Fixes#49536.
Updates #50552.
Change-Id: I949ef45e7be09406e5a8149e251d78e015aca5fa
Reviewed-on: https://go-review.googlesource.com/c/go/+/390335
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Also correct scope position for such variables.
Adjusted some comments.
Fixes#51437.
Change-Id: Ic49a1459469c8b2c7bc24fe546795f7d56c67cb4
Reviewed-on: https://go-review.googlesource.com/c/go/+/389594
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Robert Findley <rfindley@google.com>
This CL is a bit overkill, but it is pretty safe for 1.18. We'll
want to revisit for 1.19 so we can avoid the hash collisions between
types, e.g. G[int] and G[float64], that will cause some slowdowns
(but not incorrect behavior). Thanks Cherry for the simple idea.
Fixes#51250
Change-Id: I68130e09ba68e7cc35687bc623f63547bc552867
Reviewed-on: https://go-review.googlesource.com/c/go/+/389474
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
When doing constraint type inference, we must consider whether the
constraint's core type is precise (no tilde) or imprecise (tilde,
or not a single specific type). In the latter case, we cannot infer
an unknown type argument from the (imprecise) core type because there
are infinitely many possible types. For instance, given
[E ~byte]
if we don't know E, we cannot infer that E must be byte (it could be
myByte, etc.). On the other hand, if we do know the type argument,
say for S in this example:
[S ~[]E, E any]
we must consider the underlying type of S when matching against ~[]E
because we have a tilde.
Because constraint type inference may infer type arguments that were
not eligible initially (because they were unknown and the core type
is imprecise), we must iterate the process until nothing changes any-
more. For instance, given
[S ~[]E, M ~map[string]S, E any]
where we initially only know the type argument for M, we must ignore
S (and E) at first. After one iteration of constraint type inference,
S is known at which point we can infer E as well.
The change is large-ish but the actual functional changes are small:
- There's a new method "unknowns" to determine the number of as of yet
unknown type arguments.
- The adjCoreType function has been adjusted to also return tilde
and single-type information. This is now conveniently returned
as (*term, bool), and the function has been renamed to coreTerm.
- The original constraint type inference loop has been adjusted to
consider tilde information.
- This adjusted original constraint type inference loop has been
nested in another loop for iteration, together with some minimal
logic to control termination.
The remaining changes are modifications to tests:
- There's a substantial new test for this issue.
- Several existing test cases were adjusted to accomodate the
fact that they inferred incorrect types: tildes have been
removed throughout. Most of these tests are for pathological
cases.
- A couple of tests were adjusted where there was a difference
between the go/types and types2 version.
Fixes#51229.
Change-Id: If0bf5fb70ec22913b5a2da89adbf8a27fbc921d9
Reviewed-on: https://go-review.googlesource.com/c/go/+/387977
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Currently we only include static entries in the hint for sizing
the map when allocating a map for a map literal. Change that to
include all entries.
This will be an overallocation if the dynamic entries in the map have
equal keys, but equal keys in map literals are rare, and at worst we
waste a bit of space.
Fixes#43020
Change-Id: I232f82f15316bdf4ea6d657d25a0b094b77884ce
Reviewed-on: https://go-review.googlesource.com/c/go/+/383634
Run-TryBot: Keith Randall <khr@golang.org>
Trust: Keith Randall <khr@golang.org>
Trust: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
We use AutogeneratedPos for most compiler-generated functions. But
for method value wrappers we currently don't. Instead, we use the
Pos for their (direct) declaration if there is one, otherwise
not set it in methodValueWrapper, which will probably cause it to
inherit from the caller, i.e. the Pos of that method value
expression. If that Pos has inline information, it will cause the
method wrapper to have bogus inline information, which could lead
to infinite loop when printing a stack trace.
Change it to use AutogeneratedPos instead.
Fixes#51401.
Change-Id: I398dfe85f9f875e1fd82dc2f489dab63ada6570d
Reviewed-on: https://go-review.googlesource.com/c/go/+/388794
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This test case is failing on the noopt builder, because it disables
inlining. Evidently the explicit -gcflags flag in all of our generics
tests was overriding the noopt builder's default mode.
This CL restores a noop -gcflags to get the builder green again until
the issue can be properly fixed.
Updates #51413.
Change-Id: I61d22a007105f756104ba690b73f1d68ce4be281
Reviewed-on: https://go-review.googlesource.com/c/go/+/388894
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
The next CL will remove the -G flag, effectively hard-coding it to its
current default (-G=3).
Change-Id: Ib4743b529206928f9f1cca9fdb19989728327831
Reviewed-on: https://go-review.googlesource.com/c/go/+/388534
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
We convert type args to shape types inside instantiations. If an
instantiation constructs a compound type based on that shape type and
uses that as a type arg to another generic function being called, then
we have a type arg with a shape type embedded inside of it. In that
case, we need to substitute out those embedded shape types with their
underlying type.
If we don't do this, we may create extra unneeded shape types that
have these other shape types embedded in them. This may lead to
generating extra shape instantiations, and a mismatch between the
instantiations that we used in generating dictionaries and the
instantations that are actually called.
Updates #51303
Change-Id: Ieef894a5fac176cfd1415f95926086277ad09759
Reviewed-on: https://go-review.googlesource.com/c/go/+/387674
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
In getInstantiation, we were not computing tparams correctly for the
case where the receiver of a method was a fully-instantiated type. This
wasn't affecting later parts of the function, since method
instantiations of fully-instantiated types were already being calculated
in an earlier path. But it did give us a non-typeparam when trying to
see if a shape was associated with a type param with a structural type.
The fix is just to get the typeparams associated with the base generic
type. Then we can eliminate a conditional check later in the code.
The tparam parameter of Shapify should always be non-nil
Fixes#51367
Change-Id: I6f95fe603886148b2dad0c581416c51373c85009
Reviewed-on: https://go-review.googlesource.com/c/go/+/388116
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Normally types of constants are emitted when the type is defined (an
ODCLTYPE). However, the types of constants where the type is an
instantiated generic type made inside the constant declaration, do not
normally get emitted. But the DWARF processor in the linker wants
to see those types. So we emit them during stenciling.
Fixes#51245
Change-Id: I59f20f1d7b91501c9ac760cf839a354356331fc6
Reviewed-on: https://go-review.googlesource.com/c/go/+/388117
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
The existing test for 51219 didn't actually trigger the types2 issue - I
hadn't been able to minimize the test case yet properly. This new test
case issue51219b.go now does trigger the types2 issue (it's only
slightly different).
Updates #51219
Change-Id: Iaba8144b4702ff4fefec86c899b8acef127b10dc
Reviewed-on: https://go-review.googlesource.com/c/go/+/387814
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
The problem in 51355 is that escape analysis decided that the
dictionary variable was captured by reference instead of by value. We
want dictionaries to always be captured by value.
Escape analysis was confused because it saw what it thought was a
reassignment of the dictionary variable. In fact, it was the only
assignment, it just wasn't marked as the defining assignment. Fix
that.
Add an assert to make sure this stays true.
Fixes#51355
Change-Id: Ifd9342455fa107b113f5ff521a94cdbf1b8a7733
Reviewed-on: https://go-review.googlesource.com/c/go/+/388115
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Delay validation of receiver type as it may cause premature expansion
of types the receiver type is dependent on. This was actually a TODO.
While the diff looks large-ish, the actual change is small: all the
receiver validation code has been moved inside the delayed function
body, and a couple of comments have been adjusted.
Fixes#51232.
Fixes#51233.
Change-Id: I44edf0ba615996266791724b832d81b9ccb8b435
Reviewed-on: https://go-review.googlesource.com/c/go/+/387918
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
We changed to delaying all transforms of generic functions, since there
are so many complicated situations where type params can be used. We
missed changing so that all Call expressions(not just some) are delayed
if in a generic function. This changes to delaying all transforms on
calls in generic functions. Had to convert Call() to g.callExpr() (so we
can access g.delayTransform()). By always delaying transforms on calls
in generic functions, we actually simplify the code a bit both in
g.CallExpr() and stencil.go.
Fixes#51236
Change-Id: I0342c7995254082c4baf709b0b92a06ec14425e9
Reviewed-on: https://go-review.googlesource.com/c/go/+/386220
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The code for issue #51219 reveals bugs in the types1 and types2
importers that can occur for recursive types that are recursive through
the type constraint.
The crash in the issue is caused by the types1 bug, which leads to the
production of a type1 type which is incomplete and improperly has the
HasTParam flag set. The bug in the types1 importer is that we were not
deferring type instantiations when reading the type parameters, but we
need to do that exactly to correctly handle recursion through the type
constraint. So, the fix is to move the start of the deferrals (in the
'U' section of doDecl in typecheck/iimport.go) above the code that reads
the type params.
Once that bug is fixed, the test still crashes due to a related types2
importer issues. The problem is that t.SetConstraint(c) requires c to be
fully constructed (have its underlying type set). Since that may not be
done yet in the 'U' case in (*importReader).obj() in
importer/iimport.go, we need to defer the call to SetConstraint() in
that case, until we are done importing all the types.
I added a test case with recursion through a type constraint that causes
a problem that is fixed by the types1 importer change, though the error
is not the same as in the issue. I added more types in the test case
(which try to imitate the issue types more closely) the types2 bug, but
wasn't able to cause it yet with the smaller test case.
Fixes#51219
Change-Id: I85d860c98c09dddc37f76ce87a78a6015ec6fd20
Reviewed-on: https://go-review.googlesource.com/c/go/+/386335
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Pointer comparison is lowered to the following on RISCV64
(EqPtr x y) => (SEQZ (SUB <x.Type> x y))
The difference of two pointers (the SUB) should not be pointer
type. Otherwise it can cause the GC to find a bad pointer.
Should fix#51101.
Change-Id: I7e73c2155c36ff403c032981a9aa9cccbfdf0f64
Reviewed-on: https://go-review.googlesource.com/c/go/+/385655
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Change-Id: Ie949f2131845f9f9292caff798f6933648779122
Reviewed-on: https://go-review.googlesource.com/c/go/+/385434
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
If an invalid array length is just an identifier, mention
"array length" so that it's clear this is an invalid array
declaration and not a (invalid) generic type declaration.
Fixes#51145.
Change-Id: I8878cbb6c7b1277fc0a9a014712ec8d55499c5c7
Reviewed-on: https://go-review.googlesource.com/c/go/+/385255
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This is a pure rename of the respective Go functions/methods
with corresponding adjustments to error messages and tests.
A couple of comments were manually rephrased.
With this change, the implementation and error messages match
the latest spec.
No functionality change.
Change-Id: Iaa92a08b64756356fb2c5abdaca5c943c9105c96
Reviewed-on: https://go-review.googlesource.com/c/go/+/384618
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Change run.go to apply the GO_TEST_TIMEOUT_SCALE scaling factor to
test timeouts (mentioned in "-t" clause in test header).
Also with this patch, bump up the timeout for fixedbugs/issue46234.go
from 30 to 45 seconds, to avoid flakes on very slow builders.
Updates #50973.
Change-Id: Icbafa482860e24cc1e72fee53511bcc764d06bf1
Reviewed-on: https://go-review.googlesource.com/c/go/+/382774
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Than McIntosh <thanm@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Refactor Checker.comparison such that its logic is easier to reason
about and so that special cases can be handled more directly.
Use the appropriate operand (of 1st or 2nd operand) for error
reporting (position and type), rather than always using the
first operand.
Use an extra parameter to indicate a switch case
comparison; in this case the error is always reported at
the position of the first operand. (The error messages are
not yet adjusted for switches; see next CL.)
Introduce a new kindString function which is used to print simplified
types in error messages (related to comparisons only): instead of
printing the details of a struct type, we just print "struct" where
the details are not relevant. This matches the 1.17 compiler behavior.
Added a "reportf" parameter to the internal comparable function so we
can report an error cause in addition to the boolean result. Rather
than passing a *string for cause, we pass a function to record the
cause so that we can use the *Checker context for printing (needed
for proper type qualification). This mechanism reports the same
details now as the 1.17 compiler.
Adjusted various tests as needed added new test files.
Fixes#50918.
Change-Id: I1f0e7af22f09db4d31679c667c71a9038a8dc9d2
Reviewed-on: https://go-review.googlesource.com/c/go/+/381964
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
It has moved to golang.org/x/exp/constraints. Perhaps it will move
back to the standard library in a future release.
For golang/go#45458Fixesgolang/go#50792
Change-Id: I93aa251a7afe7b329a3d3faadc0c5d6388b1f0e9
Reviewed-on: https://go-review.googlesource.com/c/go/+/382460
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
This makes the error case pointed out in the issue like the current
message in Go 1.17 or -G=0 mode. The priority is to point out the
similar but wrong method name, rather than a difference in type.
Made changes to both cmd/compile/internal/types2 and go/types.
Added in a missing tab in an error message in go/types.
At the same time, removed the extra "at info" on the have lines (and
pointer receiver lines) of error messages, as requested in #50907.
Fixes#50816Fixes#50907
Change-Id: I04f8151955bdb6192246cbcb59adc1c4b8a2c4e5
Reviewed-on: https://go-review.googlesource.com/c/go/+/381774
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
We can type-check these fine but the API implications are unclear.
Fixes#50912.
For #50937.
Change-Id: If29bbb4a257ff6a85e3bfcd4755fd8f90c80fb87
Reviewed-on: https://go-review.googlesource.com/c/go/+/382116
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
- Use the correct predicate in Checker.implements: for interfaces
we cannot use the API Comparable because it always returns true
for all non-type parameter interface types: Comparable simply
answers if == and != is permitted, and it's always been permitted
for interfaces. Instead we must use Interface.IsComparable which
looks at the type set of an interface.
- When comparing interfaces for identity, we must also consider the
whether the type sets have the comparable bit set.
With this change, `any` doesn't implement `comparable` anymore. This
only matters for generic functions and types, and the API functions.
It does mean that for now (until we allow type-constrained interfaces
for general non-constraint use, at some point in the future) a type
parameter that needs to be comparable cannot be instantiated with an
interface anymore.
For #50646.
Change-Id: I7e7f711bdcf94461f330c90509211ec0c2cf3633
Reviewed-on: https://go-review.googlesource.com/c/go/+/381254
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
For a composite literal expression like []T{{f: 1}}, we allow T to be
a pointer to struct type, so it's consistent to allow T to also be a
type parameter whose structural type is a pointer to struct type.
Fixes#50833.
Change-Id: Ib0781ec4a4f327c875ea25b97740ff2c0c86b916
Reviewed-on: https://go-review.googlesource.com/c/go/+/381075
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
These can go wrong when one of the operands is the minimum integer value.
Fixes#50854.
Change-Id: I238fe284f60c7ee5aeb9dc9a18e8b1578cdb77d0
Reviewed-on: https://go-review.googlesource.com/c/go/+/381318
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Add a missing shape check in (*Tsubster).tinter when substituting on a
generic type which is an empty interface, analogous to same check in
(*Tsubster).tstruct. Empty structs/interfaces that have rparams (i.e.
are a generic type or a shape type) need to get a new type of their
rparams - they will be different even though they don't have any
fields/methods. Without this shape check, we were not correctly
completing the Token[int] type during substitution in the example in the
issue. This issue only happens for a generic type which is an empty
interface (i.e. doesn't actually use the type param, hence quite unusual).
Added the test case already created by Keith.
Fixes#50841
Change-Id: Ia985b9f52c0e87ed0647b46373e44c51cb748ba4
Reviewed-on: https://go-review.googlesource.com/c/go/+/381175
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This CL updates unified IR to look at the structural type of a
composite literal type, rather than merely the underlying type, to
determine if it's a structure. This fixes a number of currently
failing regress test cases.
Updates #50833.
Change-Id: I11c040c77ec86c23e8ffefcf1ce1aed548687dc5
Reviewed-on: https://go-review.googlesource.com/c/go/+/381074
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
For #50646.
Change-Id: I7420545556e0df2659836364a62ce2c32ad7a8b1
Reviewed-on: https://go-review.googlesource.com/c/go/+/380654
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
We have disallowed having a typeparam on the right-hand-side of a type
declaration. So, we disabled much of the test absdiff.go. I recently
wrote a new test absdiff2.go to use a structure containing the type
param type, so I could attach a method properly and run the full test.
As a contrast, I thought I would create absdiff3.go, where the Abs
functionality is passed in as a function callback (but derived from a
generic function). This is simpler, and more inline with some of the
guidelines that Ian has been proposing (use passed-in functions rather
than requiring methods, when possible, for greater ease-of-use).
Only adds a new test absdiff3.go. (And fixes a comment in absdiff2.go.)
Change-Id: I6dd185b50a3baeec31f689a892319963468a7201
Reviewed-on: https://go-review.googlesource.com/c/go/+/380774
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Added a new absdiff2.go test case, which works fully without using a
typeparam on the right-hand-side of a type declaration (which is
disallowed). Fixed an issue that the test revealed, which is that we
need to set g.curDecl properly for the "later" functions which are
deferred until after all declarations are initially processed. Also,
g.curDecl may be non-nil in typeDecl for local type declaration. So, we
adjust the associate assertion, and save/restore g.curDecl
appropriately.
Fixes#50790
Change-Id: Ieed76a7ad0a83bccb99cbad4bf98a7bfafbcbbd3
Reviewed-on: https://go-review.googlesource.com/c/go/+/380594
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
By processing non-alias type declarations before alias type declaration,
and those before everything else we can avoid some of the remaining
errors which are due to alias types not being available.
For #25838.
For #50259.
For #50276.
For #50729.
Change-Id: I233da2899a6d4954c239638624dfa8c08662e6b9
Reviewed-on: https://go-review.googlesource.com/c/go/+/380056
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The type checker doesn't have a general mechanism to "use" the type
of a type alias whose type depends on a recursive type declaration
which is not yet completely type-checked. In some cases, the type of
a type alias is needed before it is determined; the type is incorrect
(invalid) in that case but no error is reported. The type-checker is
happy with this (incorrect type), but the compiler may crash under
some circumstances.
A correct fix will likely require some form of forwarding type which
is a fairly pervasive change and may also affect the type checker API.
This CL introduces a simple side table, a map of broken type aliases,
which is consulted before the type associated with a type alias is
used. If the type alias is broken, an error is reported.
This is a stop-gap solution that prevents the compiler from crashing.
The reported error refers to the corresponding issue which suggests
a work-around that may be applicable in some cases.
Also fix a minor error related to type cycles: If we have a cycle
that doesn't start with a type, don't use a compiler error message
that explicitly mentions "type".
Fixes#50259.
Fixes#50276.
Fixes#50779.
For #50729.
Change-Id: Ie8e38f49ef724e742e8e78625e6d4f3d4014a52c
Reviewed-on: https://go-review.googlesource.com/c/go/+/379916
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
In validType, when we see an instantiated type, proceed as with
non-generic types but provide an environment in which to look up
the values (the corresponding type arguments) of type parameters
of the instantiated type. For each type parameter for which there
is a type argument, proceed with validating that type argument.
This corresponds to applying validType to the instantiated type
without actually instantiating the type (and running into infinite
instantiations in case of invalid recursive types).
Also, when creating a type instance, use the correct source position
for the instance (the start of the qualified identifier if we have an
imported type).
Fixes#48962.
Change-Id: I196c78bf066e4a56284d53368b2eb71bd8d8a780
Reviewed-on: https://go-review.googlesource.com/c/go/+/379414
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Given we have support for field access to type params with a single
structural type, we need to distinguish between methods calls and field
access when we have an OXDOT node on an expression which is a typeparam
(or correspondingly a shape). We were missing checks in getInstInfo,
which figures out the dictionary format, which then caused problems when
we generate the dictionaries. We don't need/want dictionary entries for
field access, only for bound method calls. Added a new function
isBoundMethod() to distinguish OXDOT nodes which are bound calls vs.
field accesses on a shape.
Removed isShapeDeref() - we can't have field access or method call on a
pointer to variable of type param type.
Fixes#50690
Change-Id: Id692f65e6f427f28cd2cfe474dd30e53c71877a7
Reviewed-on: https://go-review.googlesource.com/c/go/+/379674
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
In a method declaration "func (f *Foo[_, _]) String() string { ... }",
the two blank typeparams have the same name, but our current design with
types1 needs unique names for type params. Similarly, for export/import,
we need unique names to keep the type params straight in generic types
and connect the proper type param with the proper constraint. We make
blank type params unique by changing them to $1, $2, etc in noder.typ0()
via typecheck.TparamExportName(). We then revert $<num> back to _ during
type2 import via typecheck.TparamName(). We similarly revert
during gcimporter import. We don't need/want to revert in the types1
importer, since we want unique names for type params.
Rob Findley has made a similar change to x/tools (and we tried to make
the source code changes similar for the gcimporter and types2 importer
changes).
Fixes#50419
Change-Id: I855cc3d90d06bcf59541ed0c879e9a0e4ede45bb
Reviewed-on: https://go-review.googlesource.com/c/go/+/379194
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Most CONVIFACEs are created in the transform phase (or old typechecker,
in -G=0 mode). But if the main result of a multi-value assignment (map,
channel, or dot-type) must be converted to an interface during the
assignment, that CONVIFACE is not created until (*orderState).as2ok in
the order phase (because the AS2* ops and their sub-ops are so tightly
intertwined). But we need to create the CONVIFACE during the
stenciling/transform phase to enable dictionary lookups. So, in
transformAssign(), if we are doing a special multi-value assignment
involving a type-param-derived type, assign the results first to temps,
so that we can manifest the CONVIFACE during the transform in assigning
the first temp to lhs[0].
Added a test for both AS2RECV (channel receives) and AS2MAPR (maps). I
don't think we can have a type assertion on a type-param-derived type.
Fixes#50642
Change-Id: I4d079fc46c93d8494d7db4ea8234d91522edb02a
Reviewed-on: https://go-review.googlesource.com/c/go/+/379054
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Slightly better for cases such as string(1 << s).
Leaves type-checker tests alone for now because
there are multiple dozens.
For #45117.
Change-Id: I47b314c713fabe424c2158674bf965416a8a6f5c
Reviewed-on: https://go-review.googlesource.com/c/go/+/379274
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
For an extension operation like MOWWreg, if the operand is already
extended, we optimize the second extension out. Usually a LoadReg
of a proper type would come already extended, as a MOVW/MOVWU etc.
instruction does. But for a LoadReg to a floating point register,
the instruction does not do the extension. So we cannot elide the
extension.
Fixes#50671.
Change-Id: Id8991df78d5acdecd3fd6138c558428cbd5f6ba3
Reviewed-on: https://go-review.googlesource.com/c/go/+/379236
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Currently the code handles the case of returning values from
a function with no result parameters as a special case.
Consider this input:
package p
func f0_2() { return 1, 2 }
func f0_1() { return 1 }
func f1_0() int { return }
func f1_2() int { return 1, 2 }
func f2_0() (int, int) { return }
func f2_1() (int, int) { return 1 }
The errors are:
x.go:3:33: no result values expected <<<
x.go:4:33: no result values expected <<<
x.go:5:26: not enough return values
have ()
want (int)
x.go:6:36: too many return values
have (number, number)
want (int)
x.go:7:26: not enough return values
have ()
want (int, int)
x.go:8:33: not enough return values
have (number)
want (int, int)
There are two problems with the current special case emitting the
errors on the marked line:
1. It calls them 'result values' instead of 'return values'.
2. It doesn't show the type being returned, which can be useful to programmers.
Using the general case solves both these problems,
so this CL removes the special case and calls the general case instead.
Now those two errors read:
x.go:3:33: too many return values
have (number, number)
want ()
x.go:4:33: too many return values
have (number)
want ()
Fixes#50653.
Change-Id: If6b47dcece14ed4febb3a2d3d78270d5be1cb24d
Reviewed-on: https://go-review.googlesource.com/c/go/+/379116
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
In the compiler, we need to distinguish field and method access on a
type param. For field access, we avoid the dictionary access (to create
an interface bound) and just do the normal transformDot() (which will
create the field access on the shape type).
This field access works fine for non-pointer types, since the shape type
preserves the underlying type of all types in the shape. But we
generally merge all pointer types into a single shape, which means the
field will not be accessible via the shape type. So, we need to change
Shapify() so that a type which is a pointer type is mapped to its
underlying type, rather than being merged with other pointers.
Because we don't want to change the export format at this point in the
release, we need to compute StructuralType() directly in types1, rather
than relying on types2. That implementation is in types/type.go, along
with the helper specificTypes().
I enabled the compiler-related tests in issue50417.go, added an extra
test for unnamed pointer types, and added a bunch more tests for
interesting cases involving StructuralType(). I added a test
issue50417b.go similar to the original example, but also tests access to
an embedded field.
I also added a unit test in
cmd/compile/internal/types/structuraltype_test.go that tests a bunch of
unusual cases directly (some of which have no structural type).
Updates #50417
Change-Id: I77c55cbad98a2b95efbd4a02a026c07dfbb46caa
Reviewed-on: https://go-review.googlesource.com/c/go/+/376194
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
When we export a shape instantiation, because a particular
fully-instantiated type is needed by an inlineable function, we possibly
export the body of the instantiation, if it is inlineable. In this case,
we should have been calling ImportedBody() to make sure that the
function body had already been read in (if it is actually imported from
another package).
Fixes#50598
Change-Id: I512d2bcc745faa6ff3a97e25bc8f46e2c2643d23
Reviewed-on: https://go-review.googlesource.com/c/go/+/378494
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
In order to make sure we export the dictionaries/shape methods for all
fully-instantiated types in inlineable functions, we need to descend
fully into types. For example, we may have a map type (e.g.
map[transactionID]Promise[*ByteBuffer]), where the key or value is a new
fully-instantiated type. So, I add a new checkFullyInst() traversal
function, which traverses all encountered types, but maintains a map, so
it only traverse it type once. We need to descend fully into interfaces,
structs, and methods, since a fully-instantiated type make occur in any
fields or arguments/results of methods, etc.
Fixes#50561
Change-Id: I88681a30384168539ed7229eed709f4e73ff0666
Reviewed-on: https://go-review.googlesource.com/c/go/+/378154
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Using type aliases, it's possible to create structs with embedded
fields that have no corresponding type literal notation. However, we
still need to generate a unique name for these types to use for linker
symbols. This CL introduces a new "struct{ Name = Type }" syntax for
use in LinkString formatting to represent these types.
Reattempt at CL 372914, which was rolled back due to race-y
LocalPkg.Lookup call that isn't safe for concurrency.
Fixes#50190.
Change-Id: I0b7fd81e1b0b3199a6afcffde96ade42495ad8d1
Reviewed-on: https://go-review.googlesource.com/c/go/+/378434
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
With this change, we shall now see:
*myS does not implement S (wrong type for DoSomething method)
have DoSomething() (string, error) at ./main.go:9:14
want DoSomething() (int, error)
instead of previously:
*myS does not implement S (wrong type for DoSomething method)
have DoSomething() (string, error)
want DoSomething() (int, error)
Fixes#42841Fixes#45813
Change-Id: I66990929e39b0d36f2e91da0d92f60586a9b84e5
Reviewed-on: https://go-review.googlesource.com/c/go/+/373634
Trust: Robert Findley <rfindley@google.com>
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
Run-TryBot: Emmanuel Odeke <emmanuel@orijtech.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The names given to methods of types created during type substitution
were possible incorrect when the type parameters themselves were nested
types.
Fixes#50485
Change-Id: I7e0043ed22c26406a5f9d8d51d9e928770a678f6
Reviewed-on: https://go-review.googlesource.com/c/go/+/377494
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The loading of the base type in typ0() may cause s.Def to be defined for
the instantiated type, so load the base type before checking s.Def.
Fixes#50486
Change-Id: Ic039bc8f774dda534f4ccd1f920220b7a10dede6
Reviewed-on: https://go-review.googlesource.com/c/go/+/377094
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Issue #50552 is due to a problem with my recent improvement in the
interaction between generics and inlining. In markInlBody(), we now mark
dictionaries and shape methods for export, so they will be available for
any package that inlines the current inlineable function. But we need to
make sure that the dictionary and method symbols have actually been
resolved into Nodes (looked up in the import data), if they are not
already defined, so we can then mark them for export.
Improved header comment on Resolve().
Fixes#50552
Change-Id: I89e52d39d3b9894591d2ad6eb3a8ed3bb5f1e0a0
Reviewed-on: https://go-review.googlesource.com/c/go/+/377714
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
For some reason, aix sometimes executes the bogus function body. This
should never happen as it lives in a no-execute section. It might be
a transient permission blip as the heap grows.
Add a small function to cleanup and synchronize the icache before
jumping to the bogus function to ensure it causes a panic, not SIGILL.
Fixes#44583
Change-Id: Iadca62d82bfb70fc62088705dac42a880a1208fa
Reviewed-on: https://go-review.googlesource.com/c/go/+/377314
Trust: Bryan Mills <bcmills@google.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
I made the default be that, where there are differences between types2
and -G=0 error messages, we want errorcheck tests to pass types2.
Typically, we can get errorcheck to pass on types2 and -G=0 if they give
the same number of error messages on the same lines, just different
wording. If they give a different number of error messages, then I made
types2 pass. I added an exception list for -G=0 to cover those cases
where -G=0 and types give different numbers of error messages.
Because types2 does not run if there are syntax errors, for several
tests, I had to split the tests into two parts in order to get all the
indicated errors to be reported in types2 (bug228.go, bug388.go,
issue11610.go, issue14520.go)
I tried to preserve the GCCGO labeling correctly (but may have gotten
some wrong). When types2 now matches where a GCCGO error previously
occurred, I transformed GCCGO_ERROR -> ERROR. When types2 no longer
reports an error in a certain place, I transformed ERROR -> GCCGO_ERROR.
When types2 reports an error in a new place, I used GC_ERROR.
The remaining entries in types2Failures are things that I think we
probably still need to fix - either actually missing errors in types2,
or cases where types2 gives worse errors than -G=0.
Change-Id: I7f01e82b322b16094096b67d7ed2bb39b410c34f
Reviewed-on: https://go-review.googlesource.com/c/go/+/372854
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
- detect *interface case and report specific error
- replaced switch with sequence of if's for more clarity
- fixed isInterfacePtr: it applies to all interfaces, incl.
type parameters
- reviewed/fixed all uses of isInterfacePtr
- adjusted error messages to be consistently of the format
"type %s is pointer to interface, not interface"
Fixes#48312.
Change-Id: Ic3c8cfcf93ad57ecdb60f6a727cce9e1aa4afb5d
Reviewed-on: https://go-review.googlesource.com/c/go/+/376914
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Added a test to make sure that the private methods of a local generic
type are properly exported, if there is a global variable with that
type.
Added comments in crawler.go, to give more detail and to give more about
the overall purpose.
Fixed one place where t.isFullyInstantiated() should be replaced by
isPtrFullyInstantiated(t), so that we catch pointers to generic types
that may be used as a method receiver.
Change-Id: I9c42d14eb6ebe14d249df7c8fa39e889f7cd3f22
Reviewed-on: https://go-review.googlesource.com/c/go/+/374754
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Using type aliases, it's possible to create structs with embedded
fields that have no corresponding type literal notation. However, we
still need to generate a unique name for these types to use for linker
symbols. This CL introduces a new "struct{ Name = Type }" syntax for
use in LinkString formatting to represent these types.
Fixes#50190.
Change-Id: I025ceb09a86e00b7583d3b9885d612f5d6cb44fe
Reviewed-on: https://go-review.googlesource.com/c/go/+/372914
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Trust: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Finally figured out how to deal with the interaction between generics
and inlining. The problem has been: what to do if you inline a function
that uses a new instantiated type that hasn't been seen in the current
package? This might mean that you need to do another round of
function/method instantiatiations after inlining, which might lead to
more inlining, etc. (which is what we currently do, but it's not clear
when you can stop the inlining/instantiation loop).
We had thought that one solution was to export instantiated types (even
if not marked as exportable) if they are referenced in exported
inlineable functions. But that was quite complex and required changing
the export format. But I realized that we really only need to make sure
the relevant dictionaries and shape instantiations for the instantiated
types are exported, not the instantiated type itself and its wrappers.
The instantiated type is naturally created as needed, and the wrappers
are generated automatically while writing out run-time type (making use
of the exported dictionaries and shape instantiations).
So, we just have to make sure that those dictionaries and shape
instantiations are exported, and then they will be available without any
extra round of instantiations after inlining. We now do this in
crawler.go. This is especially needed when the instantiated type is only
put in an interface, so relevant dictionaries/shape instantiations are
not directly referenced and therefore exported, but are still needed for
the itab.
This fix avoids the phase ordering problem where we might have to keep
creating new type instantiations and instantiated methods after each
round of inlining we do.
Removed the extra round of instantiation/inlining that were added in the
previous fix. The existing tests
test/typeparam{geninline.go,structinit.go} already test this situation
of inlining a function referencing a new instantiated type.
Added the original example from issue 50121 as test (has 5 packages),
since it found a problem with this code that the current simpler test
for 50121 did not find.
Change-Id: Iac5d0dddf4be19376f6de36ee20a83f0d8f213b5
Reviewed-on: https://go-review.googlesource.com/c/go/+/375494
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Similarly to what we do for the built-in function `copy`,
where we allow a string as 2nd argument to append, also
permit a type parameter constrained by string|[]byte.
While at it, change date in the manual.go2 test files so
that we don't need to constantly correct it when copying
a test case from that file into a proper test file.
Fixes#50281.
Change-Id: I23fed66736aa07bb3c481fe97313e828425ac448
Reviewed-on: https://go-review.googlesource.com/c/go/+/376214
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
types2 allows the conversion of a slice of a user-defined byte type B
(not builtin uint8 or byte) to string. But runtime.slicebytetostring
requires a []byte argument, so add in a CONVNOP from []B to []byte if
needed. Same for the conversion of a slice of user-defined rune types to
string.
I made the same change in the transformations of the old typechecker, so
as to keep tcConv() and transformConv() in sync. That fixes the bug for
-G=0 mode as well.
Fixes#23536
Change-Id: Ic79364427f27489187f3f8015bdfbf0769a70d69
Reviewed-on: https://go-review.googlesource.com/c/go/+/376056
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
CL 352870 added extra phase for instantiation after inlining, to take
care of the new fully-instantiated types. However, when fetching inlined
body of these types's methods, we need to allow OADDR operations on
untyped expressions, the same as what main inlining phase does.
The problem does not show up, until CL 371554, which made the compiler
do not re-typecheck while importing, thus leaving a OXDOT node to be
marked as address taken when it's not safe to do that.
Fixes#50437
Change-Id: I20076b872182c520075a4f8b84230f5bcb05b341
Reviewed-on: https://go-review.googlesource.com/c/go/+/375574
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
For #50317.
Change-Id: I24ccf333c380283a36b573ef8fc3e7fcd71bd17f
Reviewed-on: https://go-review.googlesource.com/c/go/+/376215
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Trust: Dan Scales <danscales@google.com>
Work-around for #50481: report an error for multiple
blank type parameters. It's always possible to use
non-blank names in those cases.
We expect to lift this restriction for 1.19.
For #50481.
Change-Id: Ifdd2d91340aac1da3387f7d80d46e44f5997c2a8
Reviewed-on: https://go-review.googlesource.com/c/go/+/376058
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Move switch to enable method type parameters entirely
to the parser, by adding the mode AllowMethodTypeParams.
Ensure that the error messages are consistent.
Remove unnecessary code in the type checker.
Fixes#50317.
Change-Id: I4f3958722400bdb919efa4c494b85cf62f4002bb
Reviewed-on: https://go-review.googlesource.com/c/go/+/376054
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This change implements field the access p.f where the type of p
is a type parameter with a structural constraint that is a struct
with a field f. This is only the fix for the type checker. The
compiler will need a separate CL.
This makes the behavior consistent with the fact that we can
write struct composite literals for type parameters with a
struct structural type.
For #50417.
For #50233.
Change-Id: I87d07e016f97cbf19c45cde19165eae3ec0bad2b
Reviewed-on: https://go-review.googlesource.com/c/go/+/375795
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
For #50439
Change-Id: Ifad6e6f8de42121c695b5a4dc56e0f6606e2917e
Reviewed-on: https://go-review.googlesource.com/c/go/+/375796
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Trust: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
