Remove all special handling of Google Code, which has shut down.
Commit 4ec2fd3e6a suggested that maybe the
shutdown warning should remain. However, it has been missing from Go 1.6
already, and by Go 1.7 people will most likely have realised that Google
Code has shut down.
Updates #10193.
Change-Id: I5749bbbe2fe3b07cff4edd20303bbedaeaa8d77b
Reviewed-on: https://go-review.googlesource.com/21189
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Make verbs b,c,o and U work for any array and slice of integer
type including byte and uint8.
Fix a bug that triggers badverb for []uint8 and []byte type
on the slice/array level instead of on each element like for
any other slice or array type.
Add tests that make sure we do not accidentally alter the
behavior of printing []byte for []byte and []uint8 type
if they are used at the top level when formatting with %#v.
name old time/op new time/op delta
SprintfHexBytes-2 177ns ± 2% 176ns ± 2% ~ (p=0.066 n=48+49)
SprintfBytes-2 330ns ± 1% 329ns ± 1% ~ (p=0.118 n=45+47)
Fixes#13478
Change-Id: I99328a184973ae219bcc0f69c3978cb1ff462888
Reviewed-on: https://go-review.googlesource.com/20686
Run-TryBot: Rob Pike <r@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Merge printReflectValue into printValue. Determine if handleMethods
was already called in printArg by checking if depth is 0. Do not
call handleMethods on depth 0 again in printValue to not introduce
a performance regression. handleMethods is called already in printArg
to not introduce a performance penalty for top-level Stringer,
GoStringer, Errors and Formatters by using reflect.ValueOf on them
just to retrieve them again as interface{} values in printValue.
Clear p.arg in printValue after handleMethods to print the type
of the value inside the reflect.Value when a bad verb is encountered
on the top level instead of printing "reflect.Value=" as the type of
the argument. This also fixes a bug that incorrectly prints the
whole map instead of just the value for a key if the returned value
by the map for the key is an invalid reflect value.
name old time/op new time/op delta
SprintfPadding-2 229ns ± 2% 227ns ± 1% -0.50% (p=0.013 n=20+20)
SprintfEmpty-2 36.4ns ± 6% 37.2ns ±14% ~ (p=0.091 n=18+20)
SprintfString-2 102ns ± 1% 102ns ± 0% ~ (p=0.751 n=20+20)
SprintfTruncateString-2 142ns ± 0% 141ns ± 1% -0.95% (p=0.000 n=16+20)
SprintfQuoteString-2 389ns ± 0% 388ns ± 0% -0.12% (p=0.019 n=20+20)
SprintfInt-2 100ns ± 2% 100ns ± 1% ~ (p=0.188 n=20+15)
SprintfIntInt-2 155ns ± 3% 154ns ± 2% ~ (p=0.092 n=20+20)
SprintfPrefixedInt-2 250ns ± 2% 251ns ± 3% ~ (p=0.559 n=20+20)
SprintfFloat-2 177ns ± 2% 175ns ± 1% -1.30% (p=0.000 n=20+20)
SprintfComplex-2 516ns ± 1% 510ns ± 1% -1.13% (p=0.000 n=19+16)
SprintfBoolean-2 90.9ns ± 3% 90.6ns ± 1% ~ (p=0.193 n=19+19)
SprintfHexString-2 171ns ± 1% 169ns ± 1% -1.44% (p=0.000 n=19+20)
SprintfHexBytes-2 180ns ± 1% 180ns ± 1% ~ (p=0.060 n=19+18)
SprintfBytes-2 330ns ± 1% 329ns ± 1% -0.42% (p=0.003 n=20+20)
SprintfStringer-2 354ns ± 3% 352ns ± 3% ~ (p=0.525 n=20+19)
SprintfStructure-2 804ns ± 3% 776ns ± 2% -3.56% (p=0.000 n=20+20)
FprintInt-2 155ns ± 0% 151ns ± 1% -2.35% (p=0.000 n=19+20)
FprintfBytes-2 169ns ± 0% 170ns ± 1% +0.81% (p=0.000 n=18+19)
FprintIntNoAlloc-2 112ns ± 0% 109ns ± 1% -2.28% (p=0.000 n=20+20)
Change-Id: Ib9a39082ed1be0f1f7499ee6fb6c9530f043e43a
Reviewed-on: https://go-review.googlesource.com/20923
Run-TryBot: Rob Pike <r@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Remove format flag reset from doPrint. Flags will not be set in
doPrint and printArg will not return with flags modified.
Remove the extra arguments addspace and addnewline and split up
doPrint into two simpler and specialized functions.
Change-Id: Ib884d027abfbb31c6f01b008f51d6d76fc0c1a17
Reviewed-on: https://go-review.googlesource.com/21181
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Use a type switch instead of calling Val.Ctype (which in turn just
uses a type switch anyway).
Use continue statements to simplify the control flow.
Change-Id: I65c139d706d4d78e5b4ce09d1b1505a3e424496b
Reviewed-on: https://go-review.googlesource.com/21173
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The colas function allocates 2 slice headers in each call (via Nodes.Set)
only to throw away those slice headers in the common case where both the
lhs and rhs in "lhs := rhs" have length 1.
Avoid the Nodes.Set calls in those cases. For make.bash, this eliminates
~63,000 slice header allocations.
Also: Minor cleanups in colasdefn.
Change-Id: Ib114a67c3adeb8821868bd71a5e0f5e2e19fcd4f
Reviewed-on: https://go-review.googlesource.com/21170
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
For #14876.
Change-Id: I0992859264cbaf9c9b691fad53345bbb01b4cf3b
Reviewed-on: https://go-review.googlesource.com/21085
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
For #14876.
Change-Id: I33947f74e8058437a784862f1f064974afc99250
Reviewed-on: https://go-review.googlesource.com/21084
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
- Fix a typo.
- Skip this test on -short on non-builders.
Change-Id: Id102eceb59451694bf92b618e02ccee6603b6852
Reviewed-on: https://go-review.googlesource.com/21113
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
High tag number form may not be used for tag numbers that fit in low tag number
form.
Change-Id: I93edde0e1f86087047e0b3f2e55d6180b01e78bf
Reviewed-on: https://go-review.googlesource.com/18224
Reviewed-by: Adam Langley <agl@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
For #14962.
Change-Id: I3539d882487c99dee99ac953e039b79c6b963cf9
Reviewed-on: https://go-review.googlesource.com/21150
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fixes#14944
Change-Id: I73e0997cb6ebaeced1045b0ddadac893319bd78f
Reviewed-on: https://go-review.googlesource.com/21065
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
I recently added TestUnexportedMethods which uses an interface type
to pin type information for an unexported method. But as written,
the interface type is not accessible to the reflect package.
You can imagine a future compiler optimization realizing that and
removing the type information for f. In fact, cl/20901 happens to
do that.
Change-Id: I1ddb67f50cb9b5737253b58f10545f3de652c29d
Reviewed-on: https://go-review.googlesource.com/21112
Reviewed-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is a follow-up of https://go-review.googlesource.com/#/c/20653/
Special case computation for slices with elements of byte size or
pointer size.
name old time/op new time/op delta
GrowSliceBytes-4 86.2ns ± 3% 75.4ns ± 2% -12.50% (p=0.000 n=20+20)
GrowSliceInts-4 161ns ± 3% 136ns ± 3% -15.59% (p=0.000 n=19+19)
GrowSlicePtr-4 239ns ± 2% 233ns ± 2% -2.52% (p=0.000 n=20+20)
GrowSliceStruct24Bytes-4 258ns ± 3% 256ns ± 3% ~ (p=0.134 n=20+20)
Change-Id: Ice5fa648058fe9d7fa89dee97ca359966f671128
Reviewed-on: https://go-review.googlesource.com/21101
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When creating binaries for dynamic linking, the linker moves
read-only data symbols that contain pointers into relro sections.
It is not setup for handling a go.string symbol moving to relro.
Instead of teaching it how (because go.string symbols with pointers
are unusual anyhow), put the data in a type.. section.
Fixes the android builder.
Change-Id: Ica4722d32241643c060923517b90276ff8ac6b07
Reviewed-on: https://go-review.googlesource.com/21110
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
There's a race between runtime.goexitsall killing all OS processes
of a go program in order to exit, and runtime.newosproc forking a
new one. If the new process has been created but not yet stored
its pid in m.procid, it will not be killed by goexitsall and
deadlock results.
This CL prevents the race by making the newly forked process
check whether the program is exiting. It also prevents a
potential "shoot-out" if multiple goroutines call Exit at
the same time, which could possibly lead to two processes
killing each other and leaving the rest deadlocked.
Change-Id: I3170b4a62d2461f6b029b3d6aad70373714ed53e
Reviewed-on: https://go-review.googlesource.com/21135
Run-TryBot: David du Colombier <0intro@gmail.com>
Reviewed-by: Marvin Stenger <marvin.stenger94@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David du Colombier <0intro@gmail.com>
During random stealing we steal 4*GOMAXPROCS times from random procs.
One would expect that most of the time we check all procs this way,
but due to low quality PRNG we actually miss procs with frightening
probability. Below are modelling experiment results for 1e6 tries:
GOMAXPROCS = 2 : missed 1 procs 7944 times
GOMAXPROCS = 3 : missed 1 procs 101620 times
GOMAXPROCS = 3 : missed 2 procs 3571 times
GOMAXPROCS = 4 : missed 1 procs 63916 times
GOMAXPROCS = 4 : missed 2 procs 61 times
GOMAXPROCS = 4 : missed 3 procs 16 times
GOMAXPROCS = 5 : missed 1 procs 133136 times
GOMAXPROCS = 5 : missed 2 procs 1025 times
GOMAXPROCS = 5 : missed 3 procs 101 times
GOMAXPROCS = 5 : missed 4 procs 15 times
GOMAXPROCS = 8 : missed 1 procs 151765 times
GOMAXPROCS = 8 : missed 2 procs 5057 times
GOMAXPROCS = 8 : missed 3 procs 1726 times
GOMAXPROCS = 8 : missed 4 procs 68 times
GOMAXPROCS = 12 : missed 1 procs 199081 times
GOMAXPROCS = 12 : missed 2 procs 27489 times
GOMAXPROCS = 12 : missed 3 procs 3113 times
GOMAXPROCS = 12 : missed 4 procs 233 times
GOMAXPROCS = 12 : missed 5 procs 9 times
GOMAXPROCS = 16 : missed 1 procs 237477 times
GOMAXPROCS = 16 : missed 2 procs 30037 times
GOMAXPROCS = 16 : missed 3 procs 9466 times
GOMAXPROCS = 16 : missed 4 procs 1334 times
GOMAXPROCS = 16 : missed 5 procs 192 times
GOMAXPROCS = 16 : missed 6 procs 5 times
GOMAXPROCS = 16 : missed 7 procs 1 times
GOMAXPROCS = 16 : missed 8 procs 1 times
A missed proc won't lead to underutilization because we check all procs
again after dropping P. But it can lead to an unpleasant situation
when we miss a proc, drop P, check all procs, discover work, acquire P,
miss the proc again, repeat.
Improve stealing logic to cover all procs.
Also don't enter spinning mode and try to steal when there is nobody around.
Change-Id: Ibb6b122cc7fb836991bad7d0639b77c807aab4c2
Reviewed-on: https://go-review.googlesource.com/20836
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Marvin Stenger <marvin.stenger94@gmail.com>
Change control flow to probe with N=1. This calls benchFunc
the same number of times as the old implementation in the
absence of subbenchmarks.
To be compatible with existing tools, benchmarking only
prints a line for "leaf" benchmarks. This means, though, that
the name of a benchmark can only be printed after the first
iteration.
Issue #14863
Change-Id: Ic7b9b89b058f8ebb5287755f24f9e47df8c9537c
Reviewed-on: https://go-review.googlesource.com/21043
Run-TryBot: Marcel van Lohuizen <mpvl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This change removes a lot of dead code. Some of the code has never been
used, not even when it was first commited. The rest shouldn't have
survived refactors.
This change doesn't remove unused routines helpful for debugging, nor
does it remove code that's used in commented out blocks of code that are
only unused temporarily. Furthermore, unused constants weren't removed
when they were part of a set of constants from specifications.
One noteworthy omission from this CL are about 1000 lines of unused code
in cmd/fix, 700 lines of which are the typechecker, which hasn't been
used ever since the pre-Go 1 fixes have been removed. I wasn't sure if
this code should stick around for future uses of cmd/fix or be culled as
well.
Change-Id: Ib714bc7e487edc11ad23ba1c3222d1fd02e4a549
Reviewed-on: https://go-review.googlesource.com/20926
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Store already padded keys instead of storing key and padding it during
Reset and Sum. This simplifies code and makes Reset-Write-Sum sequences
faster, which helps /x/crypto/pbkdf2.
HMAC benchmark:
benchmark old ns/op new ns/op delta
BenchmarkHMACSHA256_1K-4 7669 7613 -0.73%
BenchmarkHMACSHA256_32-4 1880 1737 -7.61%
benchmark old MB/s new MB/s speedup
BenchmarkHMACSHA256_1K-4 133.52 134.50 1.01x
BenchmarkHMACSHA256_32-4 17.02 18.41 1.08x
PBKDF2 benchmark:
benchmark old ns/op new ns/op delta
BenchmarkPBKDF2HMACSHA256-4 1943196 1807699 -6.97%
Change-Id: I6697028370c226715ab477b0844951a83eb3488c
Reviewed-on: https://go-review.googlesource.com/21024
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
The Lookup method provides a way to extract a tag value, while
determining whether the tag key exists in the struct field's tag.
Fixes#14883
Change-Id: I7460cb68f0ca1aaa025935050b9e182efcb64db3
Reviewed-on: https://go-review.googlesource.com/20864
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Ther darwin/arm{,64} exec wrapper now limits the number of concurrent
executions to 1, so remove the higher level parallel task limit from
the Go command.
Change-Id: Id84f65c3908305bde0452b3c8db6df8c5a8881bb
Reviewed-on: https://go-review.googlesource.com/21100
Reviewed-by: David Crawshaw <crawshaw@golang.org>
I failed to rebase (and re-test) CL 21102 before submit, which meant
that two extra tests sneaked into testcarchive that still referenced
runtime.GOOS and runtime.GOARCH.
Convert the new tests.
While we're here, make sure pending tasks are flushed before running
the host tests. If not, the "##### misc/cgo/testcarchive" banner
and "PASS" won't show up in the all.bash output.
Change-Id: I41fc4ec9515f9a193fa052f7c31fac452153c897
Reviewed-on: https://go-review.googlesource.com/21106
Run-TryBot: Elias Naur <elias.naur@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Create a byte encoding designed for static Go names.
It is intended to be a compact representation of a name
and optional tag data that can be turned into a Go string
without allocating, and describes whether or not it is
exported without unicode table.
The encoding is described in reflect/type.go:
// The first byte is a bit field containing:
//
// 1<<0 the name is exported
// 1<<1 tag data follows the name
// 1<<2 pkgPath *string follow the name and tag
//
// The next two bytes are the data length:
//
// l := uint16(data[1])<<8 | uint16(data[2])
//
// Bytes [3:3+l] are the string data.
//
// If tag data follows then bytes 3+l and 3+l+1 are the tag length,
// with the data following.
//
// If the import path follows, then ptrSize bytes at the end of
// the data form a *string. The import path is only set for concrete
// methods that are defined in a different package than their type.
Shrinks binary sizes:
cmd/go: 164KB (1.6%)
jujud: 1.0MB (1.5%)
For #6853.
Change-Id: I46b6591015b17936a443c9efb5009de8dfe8b609
Reviewed-on: https://go-review.googlesource.com/20968
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The c-archive test were recently converted from shell script to Go.
Unfortunately, it also lost the ability to target iOS and Android
that lack C compilers and require exec wrappers.
Compile the c-archive test for the host and run it with the target
GOOS/GOARCH environment. Change the test to rely on go env GOOS
and go env GOARCH instead of runtime.GOOS and runtime.GOARCH.
Fixes#8345
Change-Id: I290ace2f7e96b87c55d99492feb7d660140dcb32
Reviewed-on: https://go-review.googlesource.com/21102
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In f the extra & 63 is redundant because SHRQ already
looks at the bottom 6 bits only. This is a trick on AMD64
to get rid of CMPQ/SBBQ/ANDQ if one knows that the shift
counter is small.
func f(x uint64, s uint) uint64 {
return x >> (s & 63)
}
Change-Id: I4861c902168dabec9a6a14a85750246dde94fc08
Reviewed-on: https://go-review.googlesource.com/21073
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
g used to produce CMPQ/SBBQ/ANDQ, but f didn't even though
s&15 is at most s&63.
func f(x uint64, s uint) uint64 {
return x >> (s & 63)
}
func g(x uint64, s uint) uint64 {
return x >> (s & 15)
}
Change-Id: Iab4a1a6e10b471dead9f1203e9d894677cf07bb2
Reviewed-on: https://go-review.googlesource.com/21048
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The current runtime attempts to forward signals generated by non-Go
code to the original signal handler. If it can't call the original
handler directly, it currently attempts to re-raise the signal after
resetting the handler. In this case, the original context is lost.
This fix prevents that problem by simply returning from the go signal
handler after resetting the original handler. It only does this when
the original handler is the system default handler, which in all cases
is known to not recover. The signal is not reset, so it is retriggered
and the original handler takes over with the proper context.
Fixes#14899
Change-Id: Ib1c19dfa4b50d9732d7a453de3784c8141e1cbb3
Reviewed-on: https://go-review.googlesource.com/21006
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Android doesn't (generally) have /bin/sh.
Change-Id: I343817c342e3473d09c85155761682b5ddb043e4
Reviewed-on: https://go-review.googlesource.com/21075
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes#14938.
Additionally some simplifications along the way.
Change-Id: I2c5fb7e32dcc6fab68fff36a49cb72e715756abe
Reviewed-on: https://go-review.googlesource.com/21046
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
CL 20892 converted the misc/cgo/testcarchive test to Go.
Unfortunately, dist does not (yet) support tests running off the host
so the testcarchive is disabled for now.
For #14318
Change-Id: Iab3d0a7b5309187a603b48f22a7fa736f089f89d
Reviewed-on: https://go-review.googlesource.com/21070
Reviewed-by: David Crawshaw <crawshaw@golang.org>
For darwin/arm{,64} a non-Go thread is created to convert
EXC_BAD_ACCESS to panics. However, the Go signal handler refuse to
handle signals that would otherwise be ignored if they arrive at
non-Go threads.
Block all (posix) signals to that thread, making sure that
no unexpected signals arrive to it. At least one test, TestStop in
os/signal, depends on signals not arriving on any non-Go threads.
For #14318
Change-Id: I901467fb53bdadb0d03b0f1a537116c7f4754423
Reviewed-on: https://go-review.googlesource.com/21047
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Some minor scoping cleanups found by a very old version of grind.
Change-Id: I1d373817586445fc87e38305929097b652696fdd
Reviewed-on: https://go-review.googlesource.com/21064
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Ignore superfluous trailing IDAT chunks which were not consumed when decoding
the image. This change fixes decoding of valid images in which a zero-length
IDAT chunk appears after the actual image data. It also prevents decoding of
trailing garbage IDAT chunks or maliciously embedded additional images.
Fixes#14936
Change-Id: I8c76cfa9a03496d9576f72bed2db109271f97c5e
Reviewed-on: https://go-review.googlesource.com/21045
Reviewed-by: Nigel Tao <nigeltao@golang.org>
If name is /dev/{stdin,stdout,stderr}, return fileInfo.
Fixes#14853.
Change-Id: Ibf7d1ae7b9f3dc43f6ed7c905ea2c5102e1971cc
Reviewed-on: https://go-review.googlesource.com/20845
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
This commit replaces some of
for i := len(x) - 1; i >= 0; i-- {...}
style loops, which do not rely on reverse iteration order.
Change-Id: I5542834286562da058200c06e7a173b13760e54d
Reviewed-on: https://go-review.googlesource.com/21044
Reviewed-by: Keith Randall <khr@golang.org>
Get rid of (*Mpint).Add's "quiet" parameter: it's always set to 0.
Inline (*Mpint).shift into (*Mpint).Lsh and (*Mpint).Rsh. There's no
need for a common shift method that can handle both left or right
shifts based on sign when the higher level abstractions only ever do
one or the other.
Change-Id: Icd3b082413f9193961b6835279e0bd4b6a6a6621
Reviewed-on: https://go-review.googlesource.com/21050
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Start working on arm port. Gets close to correct
code for fibonacci:
func fib(n int) int {
if n < 2 {
return n
}
return fib(n-1) + fib(n-2)
}
Still a lot to do, but this is a good starting point.
Cleaned up some arch-specific dependencies in regalloc.
Change-Id: I4301c6c31a8402168e50dcfee8bcf7aee73ea9d5
Reviewed-on: https://go-review.googlesource.com/21000
Reviewed-by: David Chase <drchase@google.com>
Remove reflect type information for unexported methods that do not
satisfy any interface in the program.
Ideally the unexported method would not appear in the method list at
all, but that is tricky because the slice is built by the compiler.
Reduces binary size:
cmd/go: 81KB (0.8%)
jujud: 258KB (0.4%)
For #6853.
Change-Id: I25ef8df6907e9ac03b18689d584ea46e7d773043
Reviewed-on: https://go-review.googlesource.com/21033
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
khr: Lifting the nil check out of the loop altogether is an admirable
goal, and this rewrite is one step on the way. But without lifting it
out of the loop, the rewrite is just hurting us.
Fixes#14917
Change-Id: Idb917f37d89f50f8e046d5ebd7c092b1e0eb0633
Reviewed-on: https://go-review.googlesource.com/21040
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The existing implementation for Equal and similar
functions in the bytes package operate on one byte at
at time. This performs poorly on ppc64/ppc64le especially
when the byte buffers are large. This change improves
those functions by loading and comparing double words where
possible. The common code has been moved to a function
that can be shared by the other functions in this
file which perform the same type of comparison.
Further optimizations are done for the case where
>= 32 bytes are being compared. The new function
memeqbody is used by memeq_varlen, Equal, and eqstring.
When running the bytes test with -test.bench=Equal
benchmark old MB/s new MB/s speedup
BenchmarkEqual1 164.83 129.49 0.79x
BenchmarkEqual6 563.51 445.47 0.79x
BenchmarkEqual9 656.15 1099.00 1.67x
BenchmarkEqual15 591.93 1024.30 1.73x
BenchmarkEqual16 613.25 1914.12 3.12x
BenchmarkEqual20 682.37 1687.04 2.47x
BenchmarkEqual32 807.96 3843.29 4.76x
BenchmarkEqual4K 1076.25 23280.51 21.63x
BenchmarkEqual4M 1079.30 13120.14 12.16x
BenchmarkEqual64M 1073.28 10876.92 10.13x
It was determined that the degradation in the smaller byte tests
were due to unfavorable code alignment of the single byte loop.
Fixes#14368
Change-Id: I0dd87382c28887c70f4fbe80877a8ba03c31d7cd
Reviewed-on: https://go-review.googlesource.com/20249
Reviewed-by: Minux Ma <minux@golang.org>
This changes how matching is done in deflate algorithm.
The major change is that we do not look for matches that are only
3 bytes in length, matches must be 4 bytes at least.
Contrary to what you would expect this actually improves the
compresion ratio, since 3 literal bytes will often be shorter
than a match after huffman encoding.
This varies a bit by source, but is most often the case when the
source is "easy" to compress.
Second of all, a "stronger" hash is used. The hash is similar to
the hashing function used by Snappy.
Overall, the speed impact is biggest on higher compression levels.
I intend to replace the "speed" compression level, which can be
seen in CL 21021.
The built-in benchmark using "digits" is slower at level 1.
I see this as an exception, since "digits" is a special type
of data, where you have low entropy (numbers 0->9), but no
significant matches. Again, CL 20021 fixes that case.
NewWriterDict is also made considerably faster, by not running data
through the entire encoder. This is not reflected by the benchmark.
Overall, the speed impact is biggest on higher compression levels.
I intend to replace the "speed" compression level.
COMPARED to tip/master:
name old time/op new time/op delta
EncodeDigitsSpeed1e4-4 401µs ± 1% 345µs ± 2% -13.95%
EncodeDigitsSpeed1e5-4 3.19ms ± 1% 4.27ms ± 3% +33.96%
EncodeDigitsSpeed1e6-4 27.7ms ± 4% 43.8ms ± 3% +58.00%
EncodeDigitsDefault1e4-4 641µs ± 0% 403µs ± 1% -37.15%
EncodeDigitsDefault1e5-4 13.8ms ± 1% 6.4ms ± 3% -53.73%
EncodeDigitsDefault1e6-4 162ms ± 1% 64ms ± 2% -60.51%
EncodeDigitsCompress1e4-4 627µs ± 1% 405µs ± 2% -35.45%
EncodeDigitsCompress1e5-4 13.9ms ± 0% 6.3ms ± 2% -54.46%
EncodeDigitsCompress1e6-4 159ms ± 1% 64ms ± 0% -59.91%
EncodeTwainSpeed1e4-4 433µs ± 4% 331µs ± 1% -23.53%
EncodeTwainSpeed1e5-4 2.82ms ± 1% 3.08ms ± 0% +9.10%
EncodeTwainSpeed1e6-4 28.1ms ± 2% 28.8ms ± 0% +2.82%
EncodeTwainDefault1e4-4 695µs ± 4% 474µs ± 1% -31.78%
EncodeTwainDefault1e5-4 11.8ms ± 0% 7.4ms ± 0% -37.31%
EncodeTwainDefault1e6-4 128ms ± 0% 75ms ± 0% -40.93%
EncodeTwainCompress1e4-4 719µs ± 3% 480µs ± 0% -33.27%
EncodeTwainCompress1e5-4 15.0ms ± 3% 8.2ms ± 2% -45.55%
EncodeTwainCompress1e6-4 170ms ± 0% 85ms ± 1% -49.99%
name old speed new speed delta
EncodeDigitsSpeed1e4-4 25.0MB/s ± 1% 29.0MB/s ± 2% +16.24%
EncodeDigitsSpeed1e5-4 31.4MB/s ± 1% 23.4MB/s ± 3% -25.34%
EncodeDigitsSpeed1e6-4 36.1MB/s ± 4% 22.8MB/s ± 3% -36.74%
EncodeDigitsDefault1e4-4 15.6MB/s ± 0% 24.8MB/s ± 1% +59.11%
EncodeDigitsDefault1e5-4 7.27MB/s ± 1% 15.72MB/s ± 3% +116.23%
EncodeDigitsDefault1e6-4 6.16MB/s ± 0% 15.60MB/s ± 2% +153.25%
EncodeDigitsCompress1e4-4 15.9MB/s ± 1% 24.7MB/s ± 2% +54.97%
EncodeDigitsCompress1e5-4 7.19MB/s ± 0% 15.78MB/s ± 2% +119.62%
EncodeDigitsCompress1e6-4 6.27MB/s ± 1% 15.65MB/s ± 0% +149.52%
EncodeTwainSpeed1e4-4 23.1MB/s ± 4% 30.2MB/s ± 1% +30.68%
EncodeTwainSpeed1e5-4 35.4MB/s ± 1% 32.5MB/s ± 0% -8.34%
EncodeTwainSpeed1e6-4 35.6MB/s ± 2% 34.7MB/s ± 0% -2.77%
EncodeTwainDefault1e4-4 14.4MB/s ± 4% 21.1MB/s ± 1% +46.48%
EncodeTwainDefault1e5-4 8.49MB/s ± 0% 13.55MB/s ± 0% +59.50%
EncodeTwainDefault1e6-4 7.83MB/s ± 0% 13.25MB/s ± 0% +69.19%
EncodeTwainCompress1e4-4 13.9MB/s ± 3% 20.8MB/s ± 0% +49.83%
EncodeTwainCompress1e5-4 6.65MB/s ± 3% 12.20MB/s ± 2% +83.51%
EncodeTwainCompress1e6-4 5.88MB/s ± 0% 11.76MB/s ± 1% +100.06%
Change-Id: I724e33c1dd3e3a6a1b0a68e094baa959352baf32
Reviewed-on: https://go-review.googlesource.com/20929
Run-TryBot: Nigel Tao <nigeltao@golang.org>
Reviewed-by: Nigel Tao <nigeltao@golang.org>
The exclusion of string from IsScanValue prevents driver authors from
writing their drivers in such a way that would allow users to
distinguish between strings and byte arrays returned from a database.
Such drivers are possible today, but require their authors to deviate
from the guidance provided by the standard library.
This exclusion has been in place since the birth of this package in
https://github.com/golang/go/commit/357f2cb1a385f4d1418e48856f9abe0cce,
but the fakedb implementation shipped in the same commit violates the
exclusion!
Strictly speaking this is a breaking change, but it increases the set
of permissible Scan types, and should not cause breakage in practice.
No test changes are necessary because fakedb already exercises this.
Fixes#6497.
Change-Id: I69dbd3a59d90464bcae8c852d7ec6c97bfd120f8
Reviewed-on: https://go-review.googlesource.com/19439
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This is to support https://golang.org/cl/18057, which is going to add
Windows support to this directory. Better to write the test in Go then
to have both test.bash and test.bat.
Update #13494.
Change-Id: I4af7004416309e885049ee60b9470926282f210d
Reviewed-on: https://go-review.googlesource.com/20892
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
No need to have both ops when they do the same thing.
Just declare MOVBload to zero extend and we can get rid
of MOVBQZXload. Same for W and L.
Kind of a followon cleanup for https://go-review.googlesource.com/c/19506/
Should enable an easier fix for #14920
Change-Id: I7cfac909a8ba387f433a6ae75c050740ebb34d42
Reviewed-on: https://go-review.googlesource.com/21004
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This makes the rounding bug fix in math/big for issue 14651 available
to the compiler.
- changes to cmd/compile/internal/big fully automatic via script
- added test case for issue
- updated old test case with correct test data
Fixes#14651.
Change-Id: Iea37a2cd8d3a75f8c96193748b66156a987bbe40
Reviewed-on: https://go-review.googlesource.com/20818
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Shows up occassionally, especially after p = p[:8:len(p)]
Updates #14905
Change-Id: Iab35ef2eac57817e6a10c6aaeeb84709e8021641
Reviewed-on: https://go-review.googlesource.com/21025
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The matcher is responsible for sanitizing and uniquing the
test and benchmark names and thus needs to be included before the
API can be exposed.
Matching currently uses the regexp to only match the top-level
tests/benchmarks.
Support for subtest matching is for another CL.
Change-Id: I7c8464068faef7ebc179b03a7fe3d01122cc4f0b
Reviewed-on: https://go-review.googlesource.com/18897
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Marcel van Lohuizen <mpvl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Escape analysis has a hard time with tree-like
structures (see #13493 and #14858).
This is unlikely to change.
As a result, when invoking a function that accepts
a **Node parameter, we usually allocate a *Node
on the heap. This happens a whole lot.
This CL changes functions from taking a **Node
to acting more like append: It both modifies
the input and returns a replacement for it.
Because of the cascading nature of escape analysis,
in order to get the benefits, I had to modify
almost all such functions. The remaining functions
are in racewalk and the backend. I would be happy
to update them as well in a separate CL.
This CL was created by manually updating the
function signatures and the directly impacted
bits of code. The callsites were then automatically
updated using a bespoke script:
https://gist.github.com/josharian/046b1be7aceae244de39
For ease of reviewing and future understanding,
this CL is also broken down into four CLs,
mailed separately, which show the manual
and the automated changes separately.
They are CLs 20990, 20991, 20992, and 20993.
Passes toolstash -cmp.
name old time/op new time/op delta
Template 335ms ± 5% 324ms ± 5% -3.35% (p=0.000 n=23+24)
Unicode 176ms ± 9% 165ms ± 6% -6.12% (p=0.000 n=23+24)
GoTypes 1.10s ± 4% 1.07s ± 2% -2.77% (p=0.000 n=24+24)
Compiler 5.31s ± 3% 5.15s ± 3% -2.95% (p=0.000 n=24+24)
MakeBash 41.6s ± 1% 41.7s ± 2% ~ (p=0.586 n=23+23)
name old alloc/op new alloc/op delta
Template 63.3MB ± 0% 62.4MB ± 0% -1.36% (p=0.000 n=25+23)
Unicode 42.4MB ± 0% 41.6MB ± 0% -1.99% (p=0.000 n=24+25)
GoTypes 220MB ± 0% 217MB ± 0% -1.11% (p=0.000 n=25+25)
Compiler 994MB ± 0% 973MB ± 0% -2.08% (p=0.000 n=24+25)
name old allocs/op new allocs/op delta
Template 681k ± 0% 574k ± 0% -15.71% (p=0.000 n=24+25)
Unicode 518k ± 0% 413k ± 0% -20.34% (p=0.000 n=25+24)
GoTypes 2.08M ± 0% 1.78M ± 0% -14.62% (p=0.000 n=25+25)
Compiler 9.26M ± 0% 7.64M ± 0% -17.48% (p=0.000 n=25+25)
name old text-bytes new text-bytes delta
HelloSize 578k ± 0% 578k ± 0% ~ (all samples are equal)
CmdGoSize 6.46M ± 0% 6.46M ± 0% ~ (all samples are equal)
name old data-bytes new data-bytes delta
HelloSize 128k ± 0% 128k ± 0% ~ (all samples are equal)
CmdGoSize 281k ± 0% 281k ± 0% ~ (all samples are equal)
name old exe-bytes new exe-bytes delta
HelloSize 921k ± 0% 921k ± 0% ~ (all samples are equal)
CmdGoSize 9.86M ± 0% 9.86M ± 0% ~ (all samples are equal)
Change-Id: I277d95bd56d51c166ef7f560647aeaa092f3f475
Reviewed-on: https://go-review.googlesource.com/20959
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
These new methods help find the compilation unit to pass to the
LineReader method in order to find the line information for a PC.
The Ranges method also helps identify the specific function for a PC,
needed to determine the function name.
This uses the .debug.ranges section if necessary, and changes the object
file format packages to pass in the section contents if available.
Change-Id: I5ebc3d27faaf1a126ffb17a1e6027efdf64af836
Reviewed-on: https://go-review.googlesource.com/20769
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Adds a new R_PCRELDBL relocation for 2-byte aligned relative
relocations on s390x. Should be removed once #14218 is
implemented.
Change-Id: I79dd2d8e746ba8cbc26c570faccfdd691e8161e8
Reviewed-on: https://go-review.googlesource.com/20941
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Should let the s390x builder progress a little further.
Change-Id: I5eab5f384b0b039f8e246ba69ecfb24de08625d2
Reviewed-on: https://go-review.googlesource.com/20965
Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Allow names to be used for subexpressions of match rules.
For example:
(OpA x:(OpB y)) -> ..use x here to refer to the OpB value..
This gets rid of the .Args[0].Args[0]... way of naming we
used to use.
While we're here, give all subexpression matches names instead
of recomputing them with .Args[i] sequences each time they
are referenced. Makes the generated rule code a bit smaller.
Change-Id: Ie42139f6f208933b75bd2ae8bd34e95419bc0e4e
Reviewed-on: https://go-review.googlesource.com/20997
Run-TryBot: Todd Neal <todd@tneal.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Todd Neal <todd@tneal.org>
Don't write back parts of a slicing operation if they
are unchanged from the source of the slice. For example:
x.s = x.s[0:5] // don't write back pointer or cap
x.s = x.s[:5] // don't write back pointer or cap
x.s = x.s[:5:7] // don't write back pointer
There is more to be done here, for example:
x.s = x.s[:len(x.s):7] // don't write back ptr or len
This CL can't handle that one yet.
Fixes#14855
Change-Id: Id1e1a4fa7f3076dc1a76924a7f1cd791b81909bb
Reviewed-on: https://go-review.googlesource.com/20954
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
For the following example, but there are a few more in the stdlib:
func histogram(b []byte, h *[256]int32) {
for _, t := range b {
h[t]++
}
}
Change-Id: I56615f341ae52e02ef34025588dc6d1c52122295
Reviewed-on: https://go-review.googlesource.com/20924
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Allow inlining of functions with switch statements as long as they don't
contain a break or type switch.
Fixes#13071
Change-Id: I057be351ea4584def1a744ee87eafa5df47a7f6d
Reviewed-on: https://go-review.googlesource.com/20824
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Converting a big.Float value x to a float32/64 value did not correctly
round x up to the smallest denormal float32/64 if x was smaller than the
smallest denormal float32/64, but larger than 0.5 of a smallest denormal
float32/64.
Handle this case explicitly and simplify some code in the turn.
For #14651.
Change-Id: I025e24bf8f0e671581a7de0abf7c1cd7e6403a6c
Reviewed-on: https://go-review.googlesource.com/20816
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alan Donovan <adonovan@google.com>
The inserted early bound checks cause the slice
to expand beyond the original length of the slice.
Change-Id: Ib38891605f4a9a12d3b9e2071a5f77640b083d2d
Reviewed-on: https://go-review.googlesource.com/20981
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
MOVSB is quite a bit faster for unaligned moves.
Possibly we should use MOVSB all of the time, but Intel folks
say it might be a bit faster to use MOVSQ on some processors
(but not any I have access to at the moment).
benchmark old ns/op new ns/op delta
BenchmarkMemmove4096-8 93.9 93.2 -0.75%
BenchmarkMemmoveUnalignedDst4096-8 256 151 -41.02%
BenchmarkMemmoveUnalignedSrc4096-8 175 90.5 -48.29%
Fixes#14630
Change-Id: I568e6d6590eb3615e6a699fb474020596be665ff
Reviewed-on: https://go-review.googlesource.com/20293
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Left over from CL 20931.
Change-Id: I3b8dd9ef748bcbf70b5118da28135aaa1e5ba3a8
Reviewed-on: https://go-review.googlesource.com/20955
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Minux Ma <minux@golang.org>
Constant comparisons against 0 are reasonably common.
Special-case and avoid allocating a new zero value each time.
Change-Id: I6c526c8ab30ef7f0fef59110133c764b7b90ba05
Reviewed-on: https://go-review.googlesource.com/20956
Reviewed-by: Alan Donovan <adonovan@google.com>
Also give them more idiomatic Go names. Adding godocs is outside the
scope of this CL. (Besides, the method names almost all directly
parallel an underlying math/big.Int or math/big.Float method.)
CL prepared mechanically with sed (for rewriting mpint.go/mpfloat.go)
and gofmt (for rewriting call sites).
Passes toolstash -cmp.
Change-Id: Id76f4aee476ba740f48db33162463e7978c2083d
Reviewed-on: https://go-review.googlesource.com/20909
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Fixed bug that slipped probably slipped in after rebasing and
explain why it failed on nacl/netbsd/plan9, which set default
maxparallelism to 1.
Change-Id: I4d59682fb2843d138b320334189f53fcdda5b2f6
Reviewed-on: https://go-review.googlesource.com/20980
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The Linux ABI takes arguments in a different order on s390x.
Change-Id: Ic9cfcc22a5ea3d8ef77d4dd0b915fc266ff3e5f7
Reviewed-on: https://go-review.googlesource.com/20960
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Minimum architecture of z196 required so that GCC can assemble
gcc_s390x.S in runtime/cgo.
Change-Id: I603ed2edd39f826fb8193740ece5bd11d18c3dc5
Reviewed-on: https://go-review.googlesource.com/20876
Reviewed-by: Ian Lance Taylor <iant@golang.org>
It was just a funny way of saying len(Ctxt.Allsym) by now.
Change-Id: Iff75e73c9f7ec4ba26cfef479bbd05d7dcd172f5
Reviewed-on: https://go-review.googlesource.com/20973
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Nothing cares about it.
I did this after looking at the memprof output, but it helps performance a bit:
name old s/op new s/op delta
LinkCmdGo 0.44 ± 3% 0.43 ± 3% -2.20% (p=0.000 n=94+90)
LinkJuju 3.98 ± 5% 3.94 ± 5% -1.19% (p=0.000 n=100+91)
As well as MaxRSS (i.e. what /usr/bin/time -f '%M' prints):
name old MaxRSS new MaxRSS delta
LinkCmdGo 130k ± 0% 120k ± 3% -7.79% (p=0.000 n=79+90)
LinkJuju 862k ± 6% 827k ± 8% -4.01% (p=0.000 n=100+99)
Change-Id: I6306b7b3369576a688659e2ecdb0815b4152ae96
Reviewed-on: https://go-review.googlesource.com/20972
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Debugasm can never be set in cmd/link, so delete it and the code it enables.
Change-Id: If828db0b09f1a9e512dc660ac2750657a769094c
Reviewed-on: https://go-review.googlesource.com/20971
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This expression in readsym:
dup != nil && len(dup.P) > 0 && strings.HasPrefix(s.Name, "gclocals·")
can never be true: if dup != nil, then s.Name is ".dup" (and this is not new:
the same broken logic is present in 1.4, at least). Delete the whole block.
Change-Id: I33b14d9a82b292116d6fd79d22b38e3842501317
Reviewed-on: https://go-review.googlesource.com/20970
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The obj.Nocache helper was only used by the arm back end, move it there.
Change-Id: I5c9faf995499991ead1f3d8c8ffc3b6af7346876
Reviewed-on: https://go-review.googlesource.com/20868
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Add a special helper for its one external use.
This is in preparation for an upcoming CL.
Passes toolstash -cmp / buildall.
Change-Id: I9d3463792afe220cc4bc89269bdecf0279abd281
Reviewed-on: https://go-review.googlesource.com/20933
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL addresses a long standing CL by rsc by pushing the use of
Link.Windows down to its two users.
Link.Window was always initalised with the value of runtime.GOOS so
this does not affect cross compilation.
Change-Id: Ibbae068f8b5aad06336909691f094384caf12352
Reviewed-on: https://go-review.googlesource.com/20869
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
'b' is a standard verb for floating point values. The runes like '+'
and '#' are called "flags" by package fmt's documentation. The flag
'-' controls left/right justification, not anything related to signs.
Change-Id: Ia9cf81b002df373f274ce635fe09b5bd0066aa1c
Reviewed-on: https://go-review.googlesource.com/20930
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Another object file change, gives a reasonable improvement:
name old s/op new s/op delta
LinkCmdGo 0.46 ± 3% 0.44 ± 9% -3.34% (p=0.000 n=98+82)
LinkJuju 4.09 ± 4% 3.92 ± 5% -4.30% (p=0.000 n=98+99)
I guess the data section could be mmap-ed instead of read, I haven't tried
that.
Change-Id: I959eee470a05526ab1579e3f5d3ede41c16c954f
Reviewed-on: https://go-review.googlesource.com/20928
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
In tests TransportPersistConnLeak and TransportPersistConnLeakShortBody,
there's a fixed wait time (100ms and 400ms respectively) to allow
goroutines to exit after CloseIdleConnections is called. This
is sometimes too short on a slow host running many simultaneous
tests.
This CL replaces the fixed sleep in each test with a sequence of
shorter sleeps, testing the number of remaining goroutines until
it reaches the threshold or an overall time limit of 500ms expires.
This prevents some failures in the plan9_arm builder, while reducing
the test time on faster machines.
Fixes#14887
Change-Id: Ia5c871062df139e2667cdfb2ce8283e135435318
Reviewed-on: https://go-review.googlesource.com/20922
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
For a long time varexpr has handled ODOT incorrectly: it has always
returned false. Before https://golang.org/cl/20890 this has been
because an ODOT had a Right field with an ONAME with no Class, for which
varexpr returns false. CL 20890 preserved the behavior of varexpr for
ODOT, so that the change would pass toolstash -cmp.
This CL fixes varexpr so that ODOT can return true in some cases. This
breaks toolstash -cmp. While the changed compiler allocates temporary
variables in a different order, I have not been able to find any
examples where the generated code is different, other than using
different stack offsets and, in some cases, registers. It seems that
other parts of the compiler will force the ODOT into a temporary anyhow.
Still, this change is clearly correct, and is a minor compiler cleanup.
Change-Id: I71506877aa3c13966bb03c281aa16271ee7fe80a
Reviewed-on: https://go-review.googlesource.com/20907
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Historically ODOT and friends have been considered to cost an extra
budget point when deciding whether they should be inlined, because they
had an ONAME node that represented the name to the right of the dot.
This doesn't really make sense, as in general that symbol does not add
any extra instructions; it just affects the offset of the load or store
instruction. And the ONAME node is gone now. So, remove the extra
cost.
This does not pass toolstash -cmp, as it changes inlining decisions.
For example, mspan.init in runtime/mheap.go is now considered to be an
inlining candidate.
Change-Id: I5ad27f08c66fd5daa4c8472dd0795df989183f5e
Reviewed-on: https://go-review.googlesource.com/20891
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reduces size of archives in pkg/linux_amd64 by 3% from 41.5MB to 40.2MB
Change-Id: Id64ca7995de8dd84c9e7ce1985730927cf4bfd66
Reviewed-on: https://go-review.googlesource.com/20912
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Deduplicate the verb switch for signed and unsigned integer formatting.
Make names of integer related functions consistent
with names of other fmt functions.
Consolidate basic integer tests.
Change-Id: I0c19c24f1c2c06a3b1a4d7d377dcdac3b36bb0f5
Reviewed-on: https://go-review.googlesource.com/20831
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
In golang.org/cl/20602, I changed the semantics of Eqtype to stop
checking the receiver parameters for type equality, and pushed this
responsibility to addmethod (the only Eqtype caller that cared).
However, I accidentally made the check stricter by making it start
requiring that receiver names were identical.
In general, this is a non-problem because the receiver names in export
data will always match the original source. But running
GO_GCFLAGS=-newexport ./all.bash at one point tries to load both old
and new format export data for package sync, which reveals the
problem. (See golang.org/issue/14877 for details.)
Easy fix: just check the receiver type for type equality in addmethod,
instead of the entire receiver parameter list.
Fixes#14877.
Change-Id: If10b79f66ba58a1b7774622b4fbad1916aba32f1
Reviewed-on: https://go-review.googlesource.com/20906
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Most 64-bit x86 ops can only take a signed 32-bit constant.
Clean up our rewrite rules to enforce this restriction.
Modify the assembler to fail if the offset does not fit
in the instruction.
That last check triggers a few times on weird testing code.
Suppress those errors if the compiler itself generated errors.
Fixes#14862
Change-Id: I76559af035b38483b1e59621a8029fc66b3a5d1e
Reviewed-on: https://go-review.googlesource.com/20815
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Changes the integer function to restore the original f.zero value
and therefore padding type before returning.
Change-Id: I456449259a3d39bd6d62e110553120c31ec63f23
Reviewed-on: https://go-review.googlesource.com/20512
Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
handleMethods can format Error() and String() directly as its known
these return strings that can be directly printed using fmtString.
Remove the obsolete depth argument from handleMethods.
Remove the depth argument from printArg since it is only ever
called with depth set to 0. Recursion for formatting complex
arguments is handled only by printValue which keeps track of depth.
Change-Id: I4c4be588751de12ed999e7561a51bc168eb9eb2d
Reviewed-on: https://go-review.googlesource.com/20911
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
The Node type ODOT and its variants all represent a selector, with a
simple name to the right of the dot. Before this change this was
represented by using an ONAME Node in the Right field. This ONAME node
served no useful purpose. This CL changes these Node types to store the
symbol in the Sym field instead, thus not requiring allocating a Node
for each selector.
When compiling x/tools/go/types this CL eliminates nearly 5000 calls to
newname and reduces the total number of Nodes allocated by about 6.6%.
It seems to cut compilation time by 1 to 2 percent.
Getting this right was somewhat subtle, and I added two dubious changes
to produce the exact same output as before. One is to ishairy in
inl.go: the ONAME node increased the cost of ODOT and friends by 1, and
I retained that, although really ODOT is not more expensive than any
other node. The other is to varexpr in walk.go: because the ONAME in
the Right field of an ODOT has no class, varexpr would always return
false for an ODOT, although in fact for some ODOT's it seemingly ought
to return true; I added an && false for now. I will send separate CLs,
that will break toolstash -cmp, to clean these up.
This CL passes toolstash -cmp.
Change-Id: I4af8a10cc59078c436130ce472f25abc3a9b2f80
Reviewed-on: https://go-review.googlesource.com/20890
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Consider functions with an ODCLCONST for inlining and modify exprfmt to
ignore those nodes when exporting. Don't add symbols to the export list
if there is no definition. This occurs when OLITERAL symbols are looked
up via Pkglookup for non-exported symbols.
Fixes#7655
Change-Id: I1de827850f4c69e58107447314fe7433e378e069
Reviewed-on: https://go-review.googlesource.com/20773
Run-TryBot: Todd Neal <todd@tneal.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Missed this in review of 20812
Change-Id: I01e220499dcd58e1a7205e2a577dd9630a8b7174
Reviewed-on: https://go-review.googlesource.com/20819
Reviewed-by: Keith Randall <khr@golang.org>
Remove rewriting of flags before calling formatters.
Change Flag method to directly take plusV and sharpV flags
into account when reporting if plus or sharp flag is set.
Change-Id: Ic3423881ad89e5a5f9fff5ab59e842062394ef6d
Reviewed-on: https://go-review.googlesource.com/20859
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
This ought to revert the bad effects of
https://go-review.googlesource.com/#/c/20775/
If you don't pass BOOT_GO_GCFLAGS, you get the
old behavior.
Tweaked to allow multiple space-separated flags in
BOOT_GO_GCFLAGS.
Change-Id: I2a22a04211b4535d1c5a8ec7a8a78cb051161c31
Reviewed-on: https://go-review.googlesource.com/20871
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
plan9, nacl, and netbsd to be precise.
Only the first test causes a hang, but just to be sure.
Change-Id: I400bb356ee2a0cf12c8666c95af79c924d1629aa
Reviewed-on: https://go-review.googlesource.com/20839
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Phi splitting sometimes leads to a phi with only a single predecessor.
This must be replaced with a copy to maintain a valid SSA form.
Fixes#14857
Change-Id: I5ab2423fb6c85a061928e3206b02185ea8c79cd7
Reviewed-on: https://go-review.googlesource.com/20826
Reviewed-by: Keith Randall <khr@golang.org>
API is not exposed yet.
Change-Id: I729360ef2be1d8ea683ca93cdb1763897cc8657c
Reviewed-on: https://go-review.googlesource.com/18895
Reviewed-by: Russ Cox <rsc@golang.org>
testing.go:
- run method will evolve into the Run method.
- added level field in common
benchmark.go:
- benchContext will be central to distinguish handling of benchmarks
between normal Run methods and ones called from within Benchmark
function.
- expandCPU will evolve into the processing hook for Run methods
called within normal processing.
- runBench will evolve into the Run method.
Change-Id: I1816f9985d5ba94deb0ad062302ea9aee0bb5338
Reviewed-on: https://go-review.googlesource.com/18894
Reviewed-by: Russ Cox <rsc@golang.org>
The biggest change is that each test is now responsible for managing
the starting and stopping of its parallel subtests.
The "Main" test could be run as a tRunner as well. This shows that
the introduction of subtests is merely a generalization of and
consistent with the current semantics.
Change-Id: Ibf8388c08f85d4b2c0df69c069326762ed36a72e
Reviewed-on: https://go-review.googlesource.com/18893
Reviewed-by: Russ Cox <rsc@golang.org>
There's nothing guaranteeing that the *Regexp isn't in active use,
and so copying the sync.Mutex value is invalid.
Updates #14839.
Change-Id: Iddf52bf69df1b563377922399f64a571f76b95dd
Reviewed-on: https://go-review.googlesource.com/20841
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
This seems to help the problem reported in #14606; this
change seems to produce about a 4% improvement (mostly
for the 128-8192 shards).
Fixes#14789.
Change-Id: I1bd52c82d4ca81d9d5e9ab371fdfc860d7e8af50
Reviewed-on: https://go-review.googlesource.com/20660
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Improve the test by also translating " " to "_".
Fixes#14671.
Change-Id: Ie5997934b93c7663d7b8432244fad47bb5d3ffbe
Reviewed-on: https://go-review.googlesource.com/20714
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is intended to help debug compiler problems that pop
up in the bootstrap phase of make.bash. GO_GCFLAGS does not
normally apply there. Options-for-all phases is intended
to allow crude tracing (and full timing) by turning on timing
for all phases, not just one.
Phase names can also be specified using a regular expression,
for example
BOOT_GO_GCFLAGS=-d='ssa/~^.*scc$/off' \
GO_GCFLAGS='-d=ssa/~^.*scc$/off' ./make.bash
I just added this because it was the fastest way to get
me to a place where I could easily debug the compiler.
Change-Id: I0781f3e7c19651ae7452fa25c2d54c9a245ef62d
Reviewed-on: https://go-review.googlesource.com/20775
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change makes unexposed methods start with lowercase letters for
avoiding unnecessary confusion because the net package uses many
embedding structures and intrefaces for controlling exposure of APIs.
Note that this change leaves DNS-related methods as they are.
Change-Id: I253758d1659175c5d0af6b2efcd30ce83f46543d
Reviewed-on: https://go-review.googlesource.com/20784
Run-TryBot: Mikio Hara <mikioh.mikioh@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The critical phase did not correctly maintain the use count
when two predecessors of a new critical block transmit the
same value.
Change-Id: Iba802c98ebb84e36a410721ec32c867140efb6d4
Reviewed-on: https://go-review.googlesource.com/20822
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Todd Neal <todd@tneal.org>
* This the simplest solution I could came up with
that doesn't required changing the compiler.
* The bound checks become constants now
so they are removed during opt phase.
Updates #14808
Change-Id: If32c33d7ec08bb400321b465015d152f0a5d3001
Reviewed-on: https://go-review.googlesource.com/20654
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Make sure we don't generate write barriers in runtime
code that is marked to forbid write barriers.
Implement the optimization that if we're writing a sliced
slice back to the location it came from, we don't need a
write barrier.
Fixes#14784
Change-Id: I04b6a3b2ac303c19817e932a36a3b006de103aaa
Reviewed-on: https://go-review.googlesource.com/20791
Reviewed-by: Austin Clements <austin@google.com>
Reduces size of archives in pkg/linux_amd64 by 1.4MB (3.2%),
slightly improving link time.
name old s/op new s/op delta
LinkCmdGo 0.52 ± 3% 0.51 ± 2% -0.65% (p=0.000 n=98+99)
Change-Id: I7e265f4d4dd08967c5c5d55c1045e533466bbbec
Reviewed-on: https://go-review.googlesource.com/20802
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Boolean expressions involving t.Thistuple were converted to use
t.Recv(), because it's a bit clearer and will hopefully reveal cases
where we could remove redundant calls to t.Recv() (in followup CLs).
The other cases were all converted to use t.Recvs().NumFields(),
t.Params().NumFields(), or t.Results().NumFields().
Change-Id: I4df91762e7dc4b2ddae35995f8dd604a52c09b09
Reviewed-on: https://go-review.googlesource.com/20796
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
We never need a type hash for a method type, so skip trying to
overwrite Thistuple.
Change-Id: I8de6480ba5fd321dfa134facf7661461d298840e
Reviewed-on: https://go-review.googlesource.com/20795
Reviewed-by: Russ Cox <rsc@golang.org>
This is an automated rewrite of all the calls of the form:
for f, it := IterFields(t); f != nil; f = it.Next() { ... }
Followup CLs will work on cleaning up the remaining cases.
Change-Id: Ic1005ad45ae0b50c63e815e34e507e2d2644ba1a
Reviewed-on: https://go-review.googlesource.com/20794
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Analogous to the Nodes type used as a more space efficient []*Node
representation.
Passes toolstash -cmp.
Change-Id: I8341e45304777d6e4200bd36dadc935b07ccf3ff
Reviewed-on: https://go-review.googlesource.com/20793
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
For every string constant the compiler was creating 2 Sym's and 2
Node's. It would never refer to them again, but would keep them alive
in gostringpkg. This changes the code to just use obj.LSym's instead.
When compiling x/tools/go/types, this yields about a 15% reduction in
the number of calls to newname and a 3% reduction in the total number of
Node objects. Unfortunately I couldn't see any change in compile time,
but reducing memory usage is desirable anyhow.
Passes toolstash -cmp.
Change-Id: I24f1cb1e6cff0a3afba4ca66f7166874917a036b
Reviewed-on: https://go-review.googlesource.com/20792
Reviewed-by: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This should probably be considered "experimental" at this stage, but
what it needs is feedback from adventurous adopters. I think the data
structure used for describing escape reasons might be extendable to
allow a cleanup of the underlying algorithms, which suffers from
insufficiently separated concerns (the graph does not deal well with
escape level adjustments, so it is augmented by a second custom-walk
portion of the "flood" phase. It would be better to put it all,
including level adjustments, in a single graph structure, and then
simply flood the graph.
Tweaked to avoid allocations in the no-logging case.
Modified run.go to ignore lines with leading "#" in the output (since
it can never match a line), and in -update_errors to ignore leading
tabs in output lines and to normalize embedded filenames.
Currently requires -m -m because otherwise the noise/update
burden for the other escape tests is considerable.
There is a partial test. Existing escape analysis tests seem to
cover all except the panic case and what looks like it might be
unreachable code in escape analysis.
Fixes#10526.
Change-Id: I2524fdec54facae48b00b2548e25d9e46fcaf832
Reviewed-on: https://go-review.googlesource.com/18041
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
If a phi has duplicate arguments, then the new block that is constructed
to remove the critical edge can be used for all of the duplicate
arguments.
read-only data = -904 bytes (-0.058308%)
global text (code) = -2240 bytes (-0.060056%)
Total difference -3144 bytes (-0.056218%)
Change-Id: Iee3762744d6a8c9d26cdfa880bb23feb62b03c9c
Reviewed-on: https://go-review.googlesource.com/20746
Run-TryBot: Todd Neal <todd@tneal.org>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Between the enumeration of fdsToClose in the parent and the
closing of fds in the child, it's possible for a file to be
closed in another thread. If that file descriptor is reused
when opening the child-parent status pipe, it will be closed
prematurely in the child and the forkExec gets out of sync.
This has been observed to cause failures in builder tests
when the link step of a build is started before the compile
step has run, with "file does not exist" messages as the
visible symptom.
The simple workaround is to check against closing the pipe.
A more comprehensive solution would be to rewrite the fd
closing code to avoid races, along the lines of the long
ago proposed https://golang.org/cl/57890043 - but meanwhile
this correction will prevent some builder failures.
Change-Id: I4ef5eaea70c21d00f4df0e0847a1c5b2966de7da
Reviewed-on: https://go-review.googlesource.com/20800
Run-TryBot: David du Colombier <0intro@gmail.com>
Reviewed-by: David du Colombier <0intro@gmail.com>
Separate unicode formatting into its own fmt_unicode function.
Remove the fmtUnicode wrapper and the f.unicode and f.uniQuote
flags that are not needed anymore. Remove mangling and restoring
of the precision and sharp flags.
Removes the buffer copy needed for %#U by moving
the character encoding before the number encoding.
Changes the behavior of plus and space flag to have
no effect instead of printing a plus or space before "U+".
Always print at least four digits after "U+"
even if precision is set to less than 4.
Change-Id: If9a0ee79e9eca2c76f06a4e0fdd75d98393899ac
Reviewed-on: https://go-review.googlesource.com/20574
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Keep track of how many uses each Value has. Each appearance in
Value.Args and in Block.Control counts once.
The number of uses of a value is generically useful to
constrain rewrite rules. For instance, we might want to
prevent merging index operations into loads if the same
index expression is used lots of times.
But I have one use in particular for which the use count is required.
We must make sure we don't combine ops with loads if the load has
more than one use. Otherwise, we may split a single load
into multiple loads and that breaks perceived behavior in
the presence of races. In particular, the load of m.state
in sync/mutex.go:Lock can't be done twice. (I have a separate
CL which triggers the mutex failure. This CL has a test which
demonstrates a similar failure.)
Change-Id: Icaafa479239f48632a069d0c3f624e6ebc6b1f0e
Reviewed-on: https://go-review.googlesource.com/20790
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Todd Neal <todd@tneal.org>
When building shared libraries, all symbols on Allsym are marked reachable.
What I didn't realize was that this includes the ".dup" symbols created when
"dupok" symbols are read from multiple package files. This breaks now because
deadcode makes some assumptions that fail for these ".dup" symbols, but in any
case was a bad idea -- I suspect this change makes libstd.so a bunch smaller,
but creating it was broken before this CL so I can't be sure.
This change simply stops adding these symbols to Allsym, which might make some
of the many iterations over Allsym the linker does a touch quicker, although
that's not the motivation here.
Add a test that no symbols called ".dup" makes it into the runtime shared
library.
Fixes#14841
Change-Id: I65dd6e88d150a770db2d01b75cfe5db5fd4f8d25
Reviewed-on: https://go-review.googlesource.com/20780
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Receiver parameters generally aren't relevant to the function
signature type. In particular:
1. When checking whether a type's method implements an interface's
method, we specifically want to ignore the receiver parameters,
because they'll be different.
2. When checking interface type equality, interface methods always
use the same "fakethis" *struct{} type as their receiver.
3. Finally, method expressions and method values degenerate into
receiver-less function types.
The only case where we care about receiver types matching is in
addmethod, which is easily handled by adding an extra Eqtype check of
the receiver parameters. Also, added a test for this, since
(surprisingly) there weren't any.
As precedence, go/types.Identical ignores receiver parameters when
comparing go/types.Signature values.
Notably, this allows us to slightly simplify the "implements"
function, which is used for checking whether type/interface t
implements interface iface. Currently, cmd/compile actually works
around Eqtype's receiver parameter checking by creating new throwaway
TFUNC Types without the receiver parameter.
(Worse, the compiler currently only provides APIs to build TFUNC Types
from Nod syntax trees, so building those throwaway types also involves
first building throwaway syntax trees.)
Passes toolstash -cmp.
Change-Id: Ib07289c66feacee284e016bc312e8c5ff674714f
Reviewed-on: https://go-review.googlesource.com/20602
Reviewed-by: Robert Griesemer <gri@golang.org>
Add a C.CBytes function to copy a Go byte slice into C memory. This
returns an unsafe.Pointer, since that is what needs to be passed to
C.free, and the data is often opaque bytes anyway.
Fixes#14838
Change-Id: Ic7bc29637eb6f1f5ee409b3898c702a59833a85a
Reviewed-on: https://go-review.googlesource.com/20762
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently we generate write barriers when the right side of an
assignment is a global function. This doesn't fall into the existing
case of storing an address of a global because we haven't lowered the
function to a pointer yet.
This write barrier is unnecessary, so eliminate it.
Fixes#13901.
Change-Id: Ibc10e00a8803db0fd75224b66ab94c3737842a79
Reviewed-on: https://go-review.googlesource.com/20772
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
c2go translated writing and advancing a pointer using slices.
Switch to something more idiomatic.
It is also more efficient, but not enough to matter.
Change-Id: I67709632ac53253615a35365824ae97bbe5458d5
Reviewed-on: https://go-review.googlesource.com/20767
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The parser code was not reachable ever since some of the lexer cleanups.
We could recognize '~' in the lexer, complain, and return a '^' instead,
but it's been a few years since Go was new and this may have been a use-
ful error. The lexer complains with "illegal character U+007E '~'" which
is good enough.
For #13244.
Change-Id: Ie3283738486eb6f8462d594f2728ac98333c0520
Reviewed-on: https://go-review.googlesource.com/20768
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Use a local variable instead.
Passes toolstash -cmp.
Change-Id: I9623a40ff0d568f11afd1279b6aaa1c33eda644c
Reviewed-on: https://go-review.googlesource.com/20730
Reviewed-by: Ian Lance Taylor <iant@golang.org>
We're about to add another root marking job that needs to happen only
during the first markroot pass (whether that's concurrent or STW),
just like finalizer scanning. Rather than introducing another flag
that has the same value as finalizersDone, just rename finalizersDone
to markrootDone.
Change-Id: I535356c6ea1f3734cb5b6add264cb7bf48de95e8
Reviewed-on: https://go-review.googlesource.com/20043
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently shinkstack is only safe during STW because it adjusts
channel-related stack pointers and moves send/receive stack slots
without synchronizing with the channel code. Make it safe to use when
the world isn't stopped by:
1) Locking all channels the G is blocked on while adjusting the sudogs
and copying the area of the stack that may contain send/receive
slots.
2) For any stack frames that may contain send/receive slot, using an
atomic CAS to adjust pointers to prevent races between adjusting a
pointer in a receive slot and a concurrent send writing to that
receive slot.
In principle, the synchronization could be finer-grained. For example,
we considered synchronizing around the sudogs, which would allow
channel operations involving other Gs to continue if the G being
shrunk was far enough down the send/receive queue. However, using the
channel lock means no additional locks are necessary in the channel
code. Furthermore, the stack shrinking code holds the channel lock for
a very short time (much less than the time required to shrink the
stack).
This does not yet make stack shrinking concurrent; it merely makes
doing so safe.
This has negligible effect on the go1 and garbage benchmarks.
For #12967.
Change-Id: Ia49df3a8a7be4b36e365aac4155a2416b94b988c
Reviewed-on: https://go-review.googlesource.com/20042
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
Currently, locking a G's stack by setting its status to _Gcopystack or
_Gscan is unordered with respect to channel locks. However, when we
make stack shrinking concurrent, stack shrinking will need to lock the
G and then acquire channel locks, which imposes an order on these.
Document this lock ordering and fix closechan to respect it.
Everything else already happens to respect it.
For #12967.
Change-Id: I4dd02675efffb3e7daa5285cf75bf24f987d90d4
Reviewed-on: https://go-review.googlesource.com/20041
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently sudog.elem is never accessed concurrently, so in several
cases we drop the channel lock just before reading/writing the
sent/received value from/to sudog.elem. However, concurrent stack
shrinking is going to have to adjust sudog.elem to point to the new
stack, which means it needs a way to synchronize with accesses to
sudog.elem. Hence, add sudog.elem to the fields protected by
hchan.lock and scoot the unlocks down past the uses of sudog.elem.
While we're here, better document the channel synchronization rules.
For #12967.
Change-Id: I3ad0ca71f0a74b0716c261aef21b2f7f13f74917
Reviewed-on: https://go-review.googlesource.com/20040
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
With concurrent stack shrinking, the stack can move the instant after
a G enters _Gwaiting. There are only two places that put a G into
_Gwaiting: gopark and newstack. We fixed uses of gopark. This commit
fixes newstack by simplifying its G transitions and, in particular,
eliminating or narrowing the transient _Gwaiting states it passes
through so it's clear nothing in the G is accessed while in _Gwaiting.
For #12967.
Change-Id: I2440ead411d2bc61beb1e2ab020ebe3cb3481af9
Reviewed-on: https://go-review.googlesource.com/20039
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
gopark calls the unlock function after setting the G to _Gwaiting.
This means it's generally unsafe to access the G's stack from the
unlock function because the G may start running on another P. Once we
start shrinking stacks concurrently, a stack shrink could also move
the stack the moment after it enters _Gwaiting and before the unlock
function is called.
Document this restriction and fix the two places where we currently
violate it.
This is unlikely to be a problem in practice for these two places
right now, but they're already skating on thin ice. For example, the
following sequence could in principle cause corruption, deadlock, or a
panic in the select code:
On M1/P1:
1. G1 selects on channels A and B.
2. selectgoImpl calls gopark.
3. gopark puts G1 in _Gwaiting.
4. gopark calls selparkcommit.
5. selparkcommit releases the lock on channel A.
On M2/P2:
6. G2 sends to channel A.
7. The send puts G1 in _Grunnable and puts it on P2's run queue.
8. The scheduler runs, selects G1, puts it in _Grunning, and resumes G1.
9. On G1, the sellock immediately following the gopark gets called.
10. sellock grows and moves the stack.
On M1/P1:
11. selparkcommit continues to scan the lock order for the next
channel to unlock, but it's now reading from a freed (and possibly
reused) stack.
This shouldn't happen in practice because step 10 isn't the first call
to sellock, so the stack should already be big enough. However, once
we start shrinking stacks concurrently, this reasoning won't work any
more.
For #12967.
Change-Id: I3660c5be37e5be9f87433cb8141bdfdf37fadc4c
Reviewed-on: https://go-review.googlesource.com/20038
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently the g.waiting list created by a select is in poll order.
However, nothing depends on this, and we're going to need access to
the channel lock order in other places shortly, so modify select to
put the waiting list in channel lock order.
For #12967.
Change-Id: If0d38816216ecbb37a36624d9b25dd96e0a775ec
Reviewed-on: https://go-review.googlesource.com/20037
Reviewed-by: Rick Hudson <rlh@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
Currently the select lock order is a []*hchan. We're going to need to
refer to things other than the channel itself in lock order shortly,
so switch this to a []uint16 of indexes into the select cases. This
parallels the existing representation for the poll order.
Change-Id: I89262223fe20b4ddf5321592655ba9eac489cda1
Reviewed-on: https://go-review.googlesource.com/20036
Reviewed-by: Rick Hudson <rlh@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Given a G, there's currently no way to find the channel it's blocking
on. We'll need this information to fix a (probably theoretical) bug in
select and to implement concurrent stack shrinking, so record the
channel in the sudog.
For #12967.
Change-Id: If8fb63a140f1d07175818824d08c0ebeec2bdf66
Reviewed-on: https://go-review.googlesource.com/20035
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
gcMarkRootCheck is too expensive to do during mark termination.
However, since it's a useful check and it complements checkmark mode
nicely, enable it during mark termination is checkmark is enabled.
Change-Id: Icd9039e85e6e9d22747454441b50f1cdd1412202
Reviewed-on: https://go-review.googlesource.com/20663
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
I was wondering why cmd/go includes the HTTP server implementations.
Dumping the linker's deadcode dependency graph into a file and doing
some graph analysis, I found that the only reason cmd/go included an
HTTP server was because the maxBytesReader type (used by both the HTTP
transport & HTTP server) did a static type assertion to an HTTP server
type.
Changing it to a interface type assertion reduces the size of cmd/go
by 533KB (5.2%)
On linux/amd64, cmd/go goes from 10549200 to 10002624 bytes.
Add a test too so this doesn't regress. The test uses cmd/go as the
binary to test (a binary which needs the HTTP client but not the HTTP
server), but this change and test are equally applicable to any such
program.
Change-Id: I93865f43ec03b06d09241fbd9ea381817c2909c5
Reviewed-on: https://go-review.googlesource.com/20763
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Step 2 of stream-lining parameter parsing
- do parameter validity checks in parser
- two passes instead of multiple (and theoretically quadratic) passes
when checking parameters
- removes the need for OKEY and some ONONAME nodes in those passes
This removes allocation of ~123K OKEY (incl. some ONONAME) nodes
out of a total of ~10M allocated nodes when running make.bash, or
a reduction of the number of alloacted nodes by ~1.2%.
Change-Id: I4a8ec578d0ee2a7b99892ac6b92e56f8e0415f03
Reviewed-on: https://go-review.googlesource.com/20748
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Robert Griesemer <gri@golang.org>
Use The fmt internal buffer for character formatting instead of
the pp Printer rune decoding buffer.
Uses an uint64 instead of int64 argument to fmt_c and fmt_qc for easier
range checks since no valid runes are represented by negative numbers or
are above 0x10ffff.
Add range checks to fmt_c and fmt_qc to guarantee that a RuneError
character is returned by the functions for any invalid code point
in range uint64. For invalid code points in range utf8.MaxRune
the used utf8 and strconv functions already return a RuneError.
Change-Id: I9772f804dfcd79c3826fa7f6c5ebfbf4b5304a51
Reviewed-on: https://go-review.googlesource.com/20373
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Remove check for %p and %T in printValue.
These verbs are not recursive and are handled already in
printArg which is called on any argument before printValue.
Format the type string for %T directly instead of invoking
the more complex printArg with %s on the type string.
Decouple the %T tests from variables declared in scan_test.go.
Change-Id: Ibd51566bd4cc1a260ce6d052f36382ed05020b48
Reviewed-on: https://go-review.googlesource.com/20622
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
The Join test was doing something remarkable and unnecessary instead of
just using ... on a slice. Maybe it was an editing relic.
Fix it by deleting the monstrosity.
Change-Id: I5b90c6d539d334a9c27e57d26dacd831721cfcfe
Reviewed-on: https://go-review.googlesource.com/20727
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Do a reset of the fmt flags before printing the extra argument
error message to prevent a malformed printing of extra arguments.
Regroup tests for extra argument error strings.
Change-Id: Ifd97f5ca36f6c97ed5a380d975cf154d17997d3f
Reviewed-on: https://go-review.googlesource.com/20571
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
This change filters out destination addresses by address family when
source address is specified to avoid running Dial operation with wrong
addressing scopes.
Fixes#11837.
Change-Id: I10b7a1fa325add2cd8ed58f105d527700a10d342
Reviewed-on: https://go-review.googlesource.com/20586
Reviewed-by: Paul Marks <pmarks@google.com>
On the latest darwin kernels, kevent in runtime-integrated network
poller sometimes reports SYN-SENT state sockets as ESTABLISHED ones,
though it's still unclear what's the root cause.
This change prevents such spurious notifications by additional connect
system calls.
Fixes#14548.
Change-Id: Ie29788e38ca735ca77259befeba3229d6a30ac52
Reviewed-on: https://go-review.googlesource.com/20468
Run-TryBot: Mikio Hara <mikioh.mikioh@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change consolidates functions and methods related to UnixAddr,
UnixConn and UnixListener for maintenance purpose, especially for
documentation.
The followup changes will update comments and examples.
Updates #10624.
Change-Id: I372d152099ac10956284e6b3863d7e4d9fe5c8e9
Reviewed-on: https://go-review.googlesource.com/20125
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change consolidates functions and methods related to IPAddr and
IPConn for maintenance purpose, especially for documentation.
The followup changes will update comments and examples.
Updates #10624.
Change-Id: Ia5146f234225704a3c0b6459e1903e56a7b68134
Reviewed-on: https://go-review.googlesource.com/20124
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change consolidates functions and methods related to UDPAddr and
UDPConn for maintenance purpose, especially for documentation.
The followup changes will update comments and examples.
Updates #10624.
Change-Id: Idfe9be8ea46ade1111b0ae176862b2048eafc7be
Reviewed-on: https://go-review.googlesource.com/20120
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Use constants instead of dynamically computed values to determine
the bit sizes of types similar to how strconv and other packages
directly compute these sizes. Move these constants near the code
that uses them.
Change-Id: I78d113b7e697466097e32653975df5990380c2c1
Reviewed-on: https://go-review.googlesource.com/20514
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
This change also refactors SplitHostPort to avoid using gotos and
naked returns.
Fixes#14827
Change-Id: I4dca528936757fd06da76c23af8a0f6175bbedd1
Reviewed-on: https://go-review.googlesource.com/20726
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
They've been on for a few weeks of general use and nothing
has tripped up on them yet.
Makes the compiler ~18% faster.
Change-Id: I42d7bbc0581597f9cf4fb28989847814c81b08a2
Reviewed-on: https://go-review.googlesource.com/20741
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The obj.Fmt* values are only used by gc/fmt.go, so just move them
there. Also, add comments documenting the correspondance between
FmtFoo names and their flag characters to make understanding the
existing documentation slightly less confusing.
While here, add a new FmtFlag named type to represent these values.
Change-Id: I9631214b892557d094823f1ac575d0c43a84007b
Reviewed-on: https://go-review.googlesource.com/20717
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Change Cond implementation to use a notification list such that waiters
can first register for a notification, release the lock, then actually
wait. Signalers never have to park anymore.
This is intended to address an issue in the previous implementation
where Broadcast could fail to signal all waiters.
Results of the existing benchmark are below.
Original New Diff
BenchmarkCond1-48 2000000 745 ns/op 755 +1.3%
BenchmarkCond2-48 1000000 1545 ns/op 1532 -0.8%
BenchmarkCond4-48 300000 3833 ns/op 3896 +1.6%
BenchmarkCond8-48 200000 10049 ns/op 10257 +2.1%
BenchmarkCond16-48 100000 21123 ns/op 21236 +0.5%
BenchmarkCond32-48 30000 40393 ns/op 41097 +1.7%
Fixes#14064
Change-Id: I083466d61593a791a034df61f5305adfb8f1c7f9
Reviewed-on: https://go-review.googlesource.com/18892
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Caleb Spare <cespare@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
While we're at it, add tests for EncodedLen and DecodedLen.
Fixes#14803.
Change-Id: I200c72cf11c51669b8d9f70c6e57ece359f7ae61
Reviewed-on: https://go-review.googlesource.com/20649
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The type information for a method includes two variants: a func
without the receiver, and a func with the receiver as the first
parameter. The former is used as part of the dynamic interface
checks, but the latter is only returned as a type in the
reflect.Method struct.
Instead of computing it at compile time, construct it at run time
with reflect.FuncOf.
Using cl/20701 as a baseline,
cmd/go: -480KB, (4.4%)
jujud: -5.6MB, (7.8%)
For #6853.
Change-Id: I1b8c73f3ab894735f53d00cb9c0b506d84d54e92
Reviewed-on: https://go-review.googlesource.com/20709
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
All of a struct's fields have to fit into memory anyway, so index them
with int instead of int64. This also makes it nicer for
cmd/compile/internal/gc to reuse the same NumFields function.
Change-Id: I210be804a0c33370ec9977414918c02c675b0fbe
Reviewed-on: https://go-review.googlesource.com/20691
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Remove method type information for pruned methods from any program
that does not reflect on methods. This can be a significant saving:
addr2line: -310KB (8.8%)
A future update might want to consider a more aggressive variant of
this: setting the Type and Func fields of reflect.Method to nil for
unexported methods. That would shrink cmd/go by 2% and jujud by 2.6%
but could be considered an API change. So this CL sticks to the
uncontroversial change.
For #6853.
Change-Id: I5d186d9f822dc118ee89dc572c4912a3b3c72577
Reviewed-on: https://go-review.googlesource.com/20701
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Make sure symbol gets carried along by load-combining rule.
Add the new load into the right block where we know that
mem is live.
Use auxInt field to carry i along instead of an explicit ADDQ.
Incorporate LEA ops into MOVBQZX and friends.
Change-Id: I587f7c6120b98fd2a0d48ddd6ddd13345d4421b4
Reviewed-on: https://go-review.googlesource.com/20732
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Todd Neal <todd@tneal.org>
Turns out there were only two call sites that expected
t.Field(t.NumFields()) to return nil.
Change-Id: I4679988d38ee9d7c9d89883537a17046717b2a77
Reviewed-on: https://go-review.googlesource.com/20731
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
On my Mac I am in group 5000 which apparently has no name
(I suspect because it is an LDAP group and I cannot reach the
LDAP server). Do not make the test fail in that case.
Fixes#14806
Change-Id: I56b11a8e86b048abfb00812eaad37802fd2adcc5
Reviewed-on: https://go-review.googlesource.com/20710
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Symbols in the object file currently refer to each other using symbol name
and version. Referring to the same symbol many times in an object file takes
up space and causes redundant map lookups. Instead write out a list of unique
symbol references and have symbols refer to each other using indexes into this
list.
Credit to Michael Hudson-Doyle for kicking this off.
Reduces pkg/linux_amd64 size by 30% from 61MB to 43MB
name old s/op new s/op delta
LinkCmdGo 0.74 ± 3% 0.63 ± 4% -15.22% (p=0.000 n=20+20)
LinkJuju 6.38 ± 6% 5.73 ± 6% -10.16% (p=0.000 n=20+19)
Change-Id: I7e101a0c80b8e673a3ba688295e6f80ea04e1cfb
Reviewed-on: https://go-review.googlesource.com/20099
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
CL 14603 attempted to preserve the callee-save registers for
the darwin/arm runtime initialization routine, but I believe it
wasn't sufficient and resulted in the crash reported in issue
Saving and restoring the registers on the stack the same way
linux/arm does seems more obvious and fixes#14778, so do that.
Even though #14778 is not reproducible on darwin/arm64, I applied
a similar change there, and to linux/arm64 which obeys the same
calling convention.
Finally, this CL is a candidate for a 1.6 minor release for the same
reason CL 14603 was in a 1.5 minor release (as CL 16968). It is
small and only touches the iOS platforms and gomobile on darwin/arm
is currently useless without it.
Fixes#14778Fixes#12590 (again)
Change-Id: I7401daf0bbd7c579a7e84761384a7b763651752a
Reviewed-on: https://go-review.googlesource.com/20621
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Move the C header style architecture constants to the per arch Main
methods.
Change-Id: Ie7ff39baa275ceaa6680e7d16441ca9f0aa12597
Reviewed-on: https://go-review.googlesource.com/20722
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Partial automatic cleanup driven by Dominik Honnef's unused tool.
As _lookup now only has one caller, merge it into the caller and remove
the conditional create logic.
Change-Id: I2ea354d9d4b32a19905271eca74725231b6d8a93
Reviewed-on: https://go-review.googlesource.com/20589
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is a band-aid, but it fixes the problem
until a deeper fix is in place.
Testing with genpkg -n 50000, I see:
Before:
154.67 real 184.66 user 3.15 sys
After:
61.82 real 96.99 user 2.17 sys
Fixes#14781.
Change-Id: I24c7822d60c289bdd6a18a7840b984954c95f7d4
Reviewed-on: https://go-review.googlesource.com/20696
Reviewed-by: Robert Griesemer <gri@golang.org>
Treat the verb %X in the same special way as %q, %s and %x
are for arrays and slices with byte type elements.
Modify input for tests so the result of %x and %X is distinct.
Change-Id: I38d227755e98c7fad5e4adc2f603c6873aa910fd
Reviewed-on: https://go-review.googlesource.com/20516
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Change-Id: I928f51a1fe4830a81d4f5d3eb572785e06a75b77
Reviewed-on: https://go-review.googlesource.com/20581
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Another step towards hooking up exported inlined function bodies.
Change-Id: Ib8094b03ac7970fee0e51b5826b5f8aa232e23fb
Reviewed-on: https://go-review.googlesource.com/20605
Reviewed-by: Alan Donovan <adonovan@google.com>
Run-TryBot: Robert Griesemer <gri@golang.org>
Currently, the only use for this is on the Left side of OKEY nodes
within struct literals. esc and fmt only care so they can recognize
that the ONAME nodes are actually field names, which need special
handling.
sinit additionally needs to know the field's offset within the struct,
which we can provide via Xoffset.
Passes toolstash/buildall.
Change-Id: I362d965e161f4d80fcd9c9bae0dfacc657dc0b29
Reviewed-on: https://go-review.googlesource.com/20676
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Switch TSTRUCT and TINTER to use Fields instead of Type, which wrings
out the remaining few direct uses of the latter.
Preparation for converting fields to use a separate "Field" type.
Passes toolstash/buildall.
Change-Id: I5a2ea7e159d0dde1be2c9afafc10a8f739d95743
Reviewed-on: https://go-review.googlesource.com/20675
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
String symbols' names used to appear in the final binary.
Using a string's contents as it's symbol's name
was a thus a bad idea if the string's name was long.
Recent improvements by crawshaw have changed that.
Instead of placing long strings behind opaque names
in local packages, place them in the global string
package and make them content-addressable.
Symbol names still occur in the object files,
so use a hash to avoid needless length there.
Reduces the size of cmd/go by 30k.
Change-Id: Ifdbbaf47bf44352418c90ddd903d5106e48db4f1
Reviewed-on: https://go-review.googlesource.com/20524
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
decompose-builtin pass requires an opt pass, but -N disables
late-opt, the only opt pass (out of two) that happens
after decompose-builtin. This CL enables both 'opt' and 'late opt'
passes. The extra compile time for 'late opt' in negligible
since most rewrites were already done in the first 'opt'
(also measured before). We should put some effort in splitting the
generic rules into required and optional.
Also update generic.rules comments about lowering
of StringMake and SliceMake.
Tested with GO_GCFLAGS=-N ./all.bash
Change-Id: I92999681aaa02587b6dc6e32ce997a91f1fc9499
Reviewed-on: https://go-review.googlesource.com/20682
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Parts of the SSA compiler in package gc contain amd64-specific code,
most notably Prog generation. Move this code into package amd64, so that
other architectures can be added more easily.
In package gc, this change is just moving code. There are no functional
changes or even any larger structural changes beyond changing function
names (mostly for export).
In the cmd/compile/internal/ssa/gen tool, more information is included
in arch to remove the AMD64-specific behavior in the main portion of the
tool. The generated opGen.go is identical.
Change-Id: I8eb37c6e6df6de1b65fa7dab6f3bc32c29daf643
Reviewed-on: https://go-review.googlesource.com/20609
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In particular, write down the rules for stack ownership because the
details of this are about to get very important with concurrent stack
shrinking. (Interestingly, the details don't actually change, but
anything that's currently skating on thin ice is likely to fall
through.)
Fox #12967.
Change-Id: I561e2610e864295e9faba07717a934aabefcaab9
Reviewed-on: https://go-review.googlesource.com/20034
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently copystack adjusts pointers in the old stack and then copies
the adjusted stack to the new stack. In addition to being generally
confusing, this is going to make concurrent stack shrinking harder.
Switch this around so that we first copy the stack and then adjust
pointers on the new stack (never writing to the old stack).
This reprises CL 15996, but takes a different and simpler approach. CL
15996 still walked the old stack while adjusting pointers on the new
stack. In this CL, we adjust auxiliary structures before walking the
stack, so we can just walk the new stack.
For #12967.
Change-Id: I94fa86f823ba9ee478e73b2ba509eed3361c43df
Reviewed-on: https://go-review.googlesource.com/20033
Reviewed-by: Rick Hudson <rlh@golang.org>
In particular, document that *sel is on the stack no matter what.
Change-Id: I1c264215e026c27721b13eedae73ec845066cdec
Reviewed-on: https://go-review.googlesource.com/20032
Reviewed-by: Rick Hudson <rlh@golang.org>
Line numbers are always int32, so the Warnl function should take the
line number as an int32 as well. This matches gc.Warnl and removes
a cast every place it's used.
Change-Id: I5d6201e640d52ec390eb7174f8fd8c438d4efe58
Reviewed-on: https://go-review.googlesource.com/20662
Run-TryBot: Todd Neal <todd@tneal.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Just recognize "DATA" as a special pseudo op word in the assembler
directly.
Change-Id: I508e111fd71f561efa600ad69567a7089a57adb2
Reviewed-on: https://go-review.googlesource.com/20648
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
The only remaining place that generated ADATA
Prog was the assembler. Stop, and delete some
now-dead code.
Passes toolstash -cmp.
Change-Id: I26578ff1b4868e98562b44f69d909c083e96f8d5
Reviewed-on: https://go-review.googlesource.com/20646
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Instead of generating ADATA instructions for
static data, write that static data directly
into the linker sym.
This is considerably more efficient.
The assembler still generates
ADATA instructions, so the ADATA machinery
cannot be dismantled yet. (Future work.)
Skipping ADATA has a significant impact
compiling the unicode package, which has lots
of static data.
name old time/op new time/op delta
Unicode 227ms ±10% 192ms ± 4% -15.61% (p=0.000 n=29+30)
name old alloc/op new alloc/op delta
Unicode 51.0MB ± 0% 45.8MB ± 0% -10.29% (p=0.000 n=30+30)
name old allocs/op new allocs/op delta
Unicode 610k ± 0% 578k ± 0% -5.29% (p=0.000 n=30+30)
This does not pass toolstash -cmp, because
this changes the order in which some relocations
get added, and thus it changes the output from
the compiler. It is not worth the execution time
to sort the relocs in the normal case.
However, compiling with -S -v generates identical
output if (1) you suppress printing of ADATA progs
in flushplist and (2) you suppress printing of
cpu timing. It is reasonable to suppress printing
the ADATA progs, since the data itself is dumped
later. I am therefore fairly confident that all
changes are superficial and non-functional.
Fixes#14786, although there's more to do
in general.
Change-Id: I8dfabe7b423b31a30e516cfdf005b62a2e9ccd82
Reviewed-on: https://go-review.googlesource.com/20645
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
And fix the wrong comment.
Initially found this because the comment was wrong about the possible
values. Then noticed that there doesn't seem to be any reason to use
uintptr over SelectDir.
Change-Id: I4f9f9640e49d89e558ed00bd99e57dab890785f5
Reviewed-on: https://go-review.googlesource.com/20655
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Only compute the number of maximum allowed elements per slice once.
Special case newcap computation for slices with byte sized elements.
name old time/op new time/op delta
GrowSliceBytes-2 61.1ns ± 1% 43.4ns ± 1% -29.00% (p=0.000 n=20+20)
GrowSliceInts-2 85.9ns ± 1% 75.7ns ± 1% -11.80% (p=0.000 n=20+20)
Change-Id: I5d9c0d5987cdd108ac29dc32e31912dcefa2324d
Reviewed-on: https://go-review.googlesource.com/20653
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It was failing like "unknown groupid ᎈ|" instead of "unknown groupid
5000" due to the conversion from int to string.
Updates #14806
Change-Id: I83e4b478ff628ad4053573a9f32b3fadce22e847
Reviewed-on: https://go-review.googlesource.com/20642
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
* Shaves about 10k from pkg/tools/linux_amd64.
* Was suggested by drchase before
* Found by looking at ssa output of #14758
Change-Id: If2c4ddf3b2603d4dfd8fb4d9199b9a3dcb05b17d
Reviewed-on: https://go-review.googlesource.com/20570
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This makes the output of compiling with -S more
stable in the face of unimportant variation in the
order in which relocs are generated.
It is also more pleasant to read the relocs when
they are sorted.
Also, do some minor cleanup.
For #14786
Change-Id: Id92020b13fd21777dfb5b29c2722c3b2eb27001b
Reviewed-on: https://go-review.googlesource.com/20641
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Split the auxFloat type into 32/64 bit versions and perform checking for
exactly representable float32 values. Perform const folding on
float32/64. Comment out some const negation rules that the frontend
already performs.
Change-Id: Ib3f8d59fa8b30e50fe0267786cfb3c50a06169d2
Reviewed-on: https://go-review.googlesource.com/20568
Run-TryBot: Todd Neal <todd@tneal.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
* Refacts a bit saving and restoring parents restrictions
* Shaves ~100k from pkg/tools/linux_amd64,
but most of the savings come from the rewrite rules.
* Improves on the following artificial test case:
func f1(a4 bool, a6 bool) bool {
return a6 || (a6 || (a6 || a4)) || (a6 || (a4 || a6 || (false || a6)))
}
Change-Id: I714000f75a37a3a6617c6e6834c75bd23674215f
Reviewed-on: https://go-review.googlesource.com/20306
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Move functions testSchedLocalQueueLocal and testSchedLocalQueueSteal
from proc.go to export_test.go, the only site that they are used.
Fixes#14796
Change-Id: I16b6fa4a13835eab33f66a2c2e87a5f5c79b7bd3
Reviewed-on: https://go-review.googlesource.com/20640
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Ensures that after request.ParseMultipartForm has been invoked,
Request.PostForm and Request.Form are both populated with the
same formValues read in, instead of only populating Request.Form.
Fixes#9305
Change-Id: I3d4a11b006fc7dffaa35360014fe15b8c74d00a3
Reviewed-on: https://go-review.googlesource.com/19986
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reuse auto symbols so cse can eliminate OpAddrs that refer to
them.
Change-Id: I69e6a3f77a3a33946459cf8c6eccf223f6125048
Reviewed-on: https://go-review.googlesource.com/20569
Run-TryBot: Todd Neal <todd@tneal.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Every go executable has COFF symbol table appended at the end. The table is
used by nm and addr2line and contains all symbols present in the executable.
The table is quite large. For example, my go.exe has 11736 records.
To generate symbol table:
1) we walk "all symbols" list to count symbols we want for the table;
2) we allocate large global array of COFFSym structs (32 bytes each)
to fit our symbols;
3) we walk "all symbols" list again to fill our array with contents;
4) we iterate over our global array to write all records to the file.
This CL changes all these steps with single step:
- walk "all symbols" list and write each COFF symbol table record to
the file as we go.
I hope new version is faster and uses less garbage, but I don't know
how to benchmark this.
Change-Id: Ie4870583250131ea4428e0e83a0696c9df1794e0
Reviewed-on: https://go-review.googlesource.com/20580
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
We use *24 a lot for pointer arithmetic when accessing slices
of slices ([][]T). Rewrite to use an LEA and a shift.
The shift will likely be free, as it often gets folded into
an indexed load/store.
Update #14606
Change-Id: Ie0bf6dc1093876efd57e88ce5f62c26a9bf21cec
Reviewed-on: https://go-review.googlesource.com/20567
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Todd Neal <todd@tneal.org>
The structpkg global variable was only used to verify internal
consistency when declaring methods during import. Track the
value in the parser and binary importer directly and pass it
to the relevant function as an argument.
Change-Id: I7e5e006f9046d84f9a3959616f073798fda36c97
Reviewed-on: https://go-review.googlesource.com/20606
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The outCount value includes a flag bit for dotdotdot.
If we have this count incorrect, then the offset for the
methodset *rtype are in the wrong place.
Fixes#14783
Change-Id: If5acb16af08d4ffe36c8c9ee389c32f2712ce757
Reviewed-on: https://go-review.googlesource.com/20566
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, if a client of crypto/tls (e.g., net/http, http2) calls
tls.Conn.Write with a 33KB buffer, that ends up writing three TLS
records: 16KB, 16KB, and 1KB. Slow clients (such as 2G phones) must
download the first 16KB record before they can decrypt the first byte.
To improve latency, it's better to send smaller TLS records. However,
sending smaller records adds overhead (more overhead bytes and more
crypto calls), which slightly hurts throughput.
A simple heuristic, implemented in this change, is to send small
records for new connections, then boost to large records after the
first 1MB has been written on the connection.
Fixes#14376
Change-Id: Ice0f6279325be6775aa55351809f88e07dd700cd
Reviewed-on: https://go-review.googlesource.com/19591
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Tom Bergan <tombergan@google.com>
Reviewed-by: Adam Langley <agl@golang.org>
Only copy the ones that actually change. Also combine deep and substAny
functions into one. The Type.Copyany field is now unused, so remove it.
Passes toolstash -cmp.
Change-Id: Id28a9bf144ecf3e522aad00496f8a21ae2b74680
Reviewed-on: https://go-review.googlesource.com/20600
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
This change improves the error message when encountering a TLS handshake
message that is larger than our limit (64KB). Previously the error was
just “local error: internal error”.
Updates #13401.
Change-Id: I86127112045ae33e51079e3bc047dd7386ddc71a
Reviewed-on: https://go-review.googlesource.com/20547
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Move lexinit, typeinit, lexinit1, and lexfini into new universe.go
file, and give them a more idiomatic and descriptive API. No code
changes.
Change-Id: I0e9b25dcc86ad10f4b990dc02bd33477b488cc85
Reviewed-on: https://go-review.googlesource.com/20604
Reviewed-by: Robert Griesemer <gri@golang.org>
Missed these two declarations in the previous cleanup.
Change-Id: I54ff3accd387dd90e12847daccf4477169797f81
Reviewed-on: https://go-review.googlesource.com/20603
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This is really moving all the non-lexer pieces out of lex.go
into main.go. It's always been confusing that the top-most
compiler entry point (Main) is in the same file with the
lexer. Both files remain of substantial size (> 1000 lines),
which justifies this even more.
No other changes.
Change-Id: I03895589d5e3cc2340580350bbc1420539893dfc
Reviewed-on: https://go-review.googlesource.com/20601
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Removes an intermediate layer of functions that was clogging up a
corner of the compiler's profile graph.
I can't measure a performance improvement running a large build
like jujud, but the profile reports less total time spent in
gc.(*lexer).getr.
Change-Id: I3000585cfcb0f9729d3a3859e9023690a6528591
Reviewed-on: https://go-review.googlesource.com/20565
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In addition to reflect.Value.Call, exported methods can be invoked
by the Func value in the reflect.Method struct. This CL has the
compiler track what functions get access to a legitimate reflect.Method
struct by looking for interface calls to either of:
Method(int) reflect.Method
MethodByName(string) (reflect.Method, bool)
This is a little overly conservative. If a user implements a type
with one of these methods without using the underlying calls on
reflect.Type, the linker will assume the worst and include all
exported methods. But it's cheap.
No change to any of the binary sizes reported in cl/20483.
For #14740
Change-Id: Ie17786395d0453ce0384d8b240ecb043b7726137
Reviewed-on: https://go-review.googlesource.com/20489
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Might as well sort them while they're still in a slice.
Change-Id: I40c25ddc5c054dcb4da2aeefa79947967609d599
Reviewed-on: https://go-review.googlesource.com/20591
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This will test if deflate output is deterministic between two runs
of the deflater, when write sizes differ.
The deflater makes no official promises that results are
deterministic between runs, but this is a good test to determine
unintentional randomness.
Note that this does not guarantee that results are deterministic
across platforms nor that results will be deterministic between
Go versions. This is also not guarantees we should imply.
Change-Id: Id7dd89fe276060fd83a43d0b34ac35d50fcd32d9
Reviewed-on: https://go-review.googlesource.com/20573
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
p can be nil in Dconv so we need to do a check before dereferencing
it. Fixes a problem I was having running toolstash.
Change-Id: I34d6d278b319583d8454c2342ac88e054fc4b641
Reviewed-on: https://go-review.googlesource.com/20595
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
I don't know what they're used for, but that's the only file they're
referenced in.
Change-Id: Ie39d7d4621e2d5224408243b5789597ca0dc14be
Reviewed-on: https://go-review.googlesource.com/20593
Reviewed-by: Dave Cheney <dave@cheney.net>
This code is an eye sore to keep scrolling past in subr.go, so move it
out of the way.
Change-Id: I8eafc1725d868a4924ee7ca9b7738cce309f9eff
Reviewed-on: https://go-review.googlesource.com/20592
Reviewed-by: Dave Cheney <dave@cheney.net>
Still fails about 20% of the time on my laptop.
Fixes#14766.
Change-Id: I169ab728c6022dceeb91188f5ad466ed6413c062
Reviewed-on: https://go-review.googlesource.com/20590
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Use idiomatic slicing operations instead of incrementally building a
linked list.
Passes toolstash -cmp.
Change-Id: Idb0e40c7b4d7d1110d23828afa8ae1d157ba905f
Reviewed-on: https://go-review.googlesource.com/20556
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In particular, make Alignof work more like Sizeof. Other idiomatic
cleanups while here.
Passes toolstash -cmp.
Change-Id: I4def20894f3d95e49ab6a50ddba189be36fdd258
Reviewed-on: https://go-review.googlesource.com/20555
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This could be done by threading the Iter value down through memrun and
ispaddedfield, but that ends up a bit clunky. This way is also closer
to how we'll want the code to look once fields are kept in slices.
Passes toolstash -cmp.
Change-Id: I8a44445c85f921eb18d97199df2026c5ce0f4f67
Reviewed-on: https://go-review.googlesource.com/20558
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
x86 has a lot of instructions that require the output to be in the same
register as one of the inputs. When allocating the output register,
allocate the same register as the input if it is available.
Improves the performance of golang.org/x/crypto/sha3 by
10% (from 6% slower than 1.6 to 4% faster).
Fixes#14745
Change-Id: I4d81785240c9368e4dc75107b45c959d200df8e6
Reviewed-on: https://go-review.googlesource.com/20488
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Not calling popdcl doesn't have an impact on generated code but
the result is a growing (rather than empty) stack of symbols,
possibly causing more data to remain alive than necessary.
Also: minor cleanups.
Change-Id: Ic4fdbcd8843637d69ab1aa15e896a7e6339bc990
Reviewed-on: https://go-review.googlesource.com/20554
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Robert Griesemer <gri@golang.org>
Use a map to detect duplicate symbols. Allows eliminating an otherwise
unneeded field from Sym and gets rid of a global variable.
Change-Id: Ic004bca7e9130a1261a1cddbc17244529a2a1df4
Reviewed-on: https://go-review.googlesource.com/20552
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Change the existing flags from compile time consts to be configurable
from the command line.
Change-Id: I4aab4bf3dfcbdd8e2b5a2ff51af95c2543967769
Reviewed-on: https://go-review.googlesource.com/20560
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Todd Neal <todd@tneal.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The location of VARDEFs is incorrect for PPARAMOUT variables
which are also used as temporary locations. We put in VARDEFs
when setting the variable at return time, but when the location
is also used as a temporary the lifetime values are wrong.
Fix copyelim to update the names map properly. This is a
real name bug fix which, as a result, allows me to
write a reasonable test to trigger the PPARAMOUT bug.
This is kind of a band-aid fix for #14591. A more pricipled
fix (which allows values to be stored in the return variable
earlier than the return point) will be harder.
Fixes#14591
Change-Id: I7df8ae103a982d1f218ed704c080d7b83cdcfdd9
Reviewed-on: https://go-review.googlesource.com/20457
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
PKIX versions are off-by-one, so v1 is actually a zero on the wire, v2
is a one, and so on.
The RFC says that the version in a CRL is optional, but doesn't say what
the default is. Since v2 is the only accepted version, I had made the
default v2. However, OpenSSL considers the default to be v1. Also, if
the default is v2 and the element is optional then we'll never actually
write v2 on the wire. That's contrary to the RFC which clearly assumes
that v2 will be expressed on the wire in some cases.
Therefore, this change aligns with OpenSSL and assumes that v1 is the
default CRL version.
Fixes#13931
[1] https://tools.ietf.org/html/rfc5280#section-5.1
Change-Id: Ic0f638ebdd21981d92a99a882affebf3a77ab71a
Reviewed-on: https://go-review.googlesource.com/20544
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The default version of an X.509 certificate is v1, which is encoded on
the wire as a zero.
Fixes#13382.
Change-Id: I5fd725c3fc8b08fd978ab694a3e2d6d2a495918b
Reviewed-on: https://go-review.googlesource.com/20548
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Allows safely eliminating more direct uses of Type's Type and Down
fields.
Passes toolstash -cmp.
Change-Id: I5c17fe541a0473c3cd2978d8314c4ab759079a61
Reviewed-on: https://go-review.googlesource.com/20541
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
I would like to add a
func (t *Type) Elem() *Type
method to package gc, but that would collide with the existing
func (t *Type) Elem() ssa.Type
method needed to make *gc.Type implement ssa.Type. Because the latter
is much less widely used right now than the former will be, this CL
renames it to ElemType.
Longer term, hopefully gc and ssa will share a common Type interface,
and ElemType can go away.
Change-Id: I270008515dc4c01ef531cf715637a924659c4735
Reviewed-on: https://go-review.googlesource.com/20546
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Eliminate "else_clause" parameter and move error messages about bad if
statements into the if_stmt parsing method.
Passes toolstash -cmp.
Change-Id: Ibc31619bdb2e7e0cf28712b14640f7d9b6124a40
Reviewed-on: https://go-review.googlesource.com/20543
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Make sure we do any just-before-return cleanup on all paths out of a
function, including when recovering. Each exit path should include
deferreturn (if there are any defers) and then the exit
code (e.g. copying heap-escaping return values back to the stack).
Introduce a Defer SSA block type which has two outgoing edges - one the
fallthrough edge (the defer was queued successfully) and one which
immediately returns (the defer had a successful recover() call and
normal execution should resume at the return point).
Fixes#14725
Change-Id: Iad035c9fd25ef8b7a74dafbd7461cf04833d981f
Reviewed-on: https://go-review.googlesource.com/20486
Reviewed-by: David Chase <drchase@google.com>
This CL was mostly produced by a one-off automated rewrite tool
looking for statements like "for X := T.Type; X != nil; X = X.Down"
and a few minor variations.
Passes toolstash -cmp.
Change-Id: Ib22705e37d078ef97841ee2e08f60bdbcabb94ad
Reviewed-on: https://go-review.googlesource.com/20520
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
That was easy.
Fixes#14473.
Change-Id: I9d1d20a5c5a9b1423e6c72c0460ee4a78130864f
Reviewed-on: https://go-review.googlesource.com/20521
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If the upstream writer has returned an error, it may not
be returned by subsequent calls.
This makes sure that if an error has been returned, the
Writer will keep returning an error on all subsequent calls,
and not silently "swallow" them.
Change-Id: I2c9f614df72e1f4786705bf94e119b66c62abe5e
Reviewed-on: https://go-review.googlesource.com/20515
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
The fmt package does not use bytes.Buffer
anymore as an internal buffer.
Change-Id: I34c7a52506290ccbcb10ea2e85dea49a0a8b8203
Reviewed-on: https://go-review.googlesource.com/20511
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This allows TestDialerFallbackDelay to pass again on machines where IPv6
connections to nowhere fail quickly instead of hanging.
This bug appeared last month, when I deleted the slowTimeout constant.
Updates #11225Fixes#14731
Change-Id: I840011eee571aab1041022411541736111c7fad5
Reviewed-on: https://go-review.googlesource.com/20493
Run-TryBot: Paul Marks <pmarks@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
The existing implementation uses code written in Go to
implement Sqrt; this adds the assembler to use the sqrt
instruction for Power and makes the necessary changes to
allow it to be inlined.
The following tests showed this relative improvement:
benchmark delta
BenchmarkSqrt -97.91%
BenchmarkSqrtIndirect -96.65%
BenchmarkSqrtGo -35.93%
BenchmarkSqrtPrime -96.94%
Fixes#14349
Change-Id: I8074f4dc63486e756587564ceb320aca300bf5fa
Reviewed-on: https://go-review.googlesource.com/19515
Reviewed-by: Minux Ma <minux@golang.org>
When calling freeValue for possible const values, remove them from the
cache as well.
Change-Id: I087ed592243e33c58e5db41700ab266fc70196d9
Reviewed-on: https://go-review.googlesource.com/20481
Run-TryBot: Todd Neal <tolchz@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
More cleanups after CL 20089
- copysub, take a bool rather than an int for the f (force) parameter.
- copysub returns a bool rather than an int.
- prevl, reg is now int16, which reduces type conversion in its callers.
- copy1, reduce the scope of t and p variables.
- small simplifications in copyau1, copyas, etc.
- {mips64,ppc64}/regzer returns a bool.
- apply CL 20181 to x86/peep.go which was missed in the last CL.
- various comment fixes.
Change-Id: Ib73ffb768c979ce86f1614e5366fd576dea50986
Reviewed-on: https://go-review.googlesource.com/20281
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>