Constant comparisons against 0 are reasonably common.
Special-case and avoid allocating a new zero value each time.
Change-Id: I6c526c8ab30ef7f0fef59110133c764b7b90ba05
Reviewed-on: https://go-review.googlesource.com/20956
Reviewed-by: Alan Donovan <adonovan@google.com>
Also give them more idiomatic Go names. Adding godocs is outside the
scope of this CL. (Besides, the method names almost all directly
parallel an underlying math/big.Int or math/big.Float method.)
CL prepared mechanically with sed (for rewriting mpint.go/mpfloat.go)
and gofmt (for rewriting call sites).
Passes toolstash -cmp.
Change-Id: Id76f4aee476ba740f48db33162463e7978c2083d
Reviewed-on: https://go-review.googlesource.com/20909
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Fixed bug that slipped probably slipped in after rebasing and
explain why it failed on nacl/netbsd/plan9, which set default
maxparallelism to 1.
Change-Id: I4d59682fb2843d138b320334189f53fcdda5b2f6
Reviewed-on: https://go-review.googlesource.com/20980
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The Linux ABI takes arguments in a different order on s390x.
Change-Id: Ic9cfcc22a5ea3d8ef77d4dd0b915fc266ff3e5f7
Reviewed-on: https://go-review.googlesource.com/20960
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Minimum architecture of z196 required so that GCC can assemble
gcc_s390x.S in runtime/cgo.
Change-Id: I603ed2edd39f826fb8193740ece5bd11d18c3dc5
Reviewed-on: https://go-review.googlesource.com/20876
Reviewed-by: Ian Lance Taylor <iant@golang.org>
It was just a funny way of saying len(Ctxt.Allsym) by now.
Change-Id: Iff75e73c9f7ec4ba26cfef479bbd05d7dcd172f5
Reviewed-on: https://go-review.googlesource.com/20973
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Nothing cares about it.
I did this after looking at the memprof output, but it helps performance a bit:
name old s/op new s/op delta
LinkCmdGo 0.44 ± 3% 0.43 ± 3% -2.20% (p=0.000 n=94+90)
LinkJuju 3.98 ± 5% 3.94 ± 5% -1.19% (p=0.000 n=100+91)
As well as MaxRSS (i.e. what /usr/bin/time -f '%M' prints):
name old MaxRSS new MaxRSS delta
LinkCmdGo 130k ± 0% 120k ± 3% -7.79% (p=0.000 n=79+90)
LinkJuju 862k ± 6% 827k ± 8% -4.01% (p=0.000 n=100+99)
Change-Id: I6306b7b3369576a688659e2ecdb0815b4152ae96
Reviewed-on: https://go-review.googlesource.com/20972
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Debugasm can never be set in cmd/link, so delete it and the code it enables.
Change-Id: If828db0b09f1a9e512dc660ac2750657a769094c
Reviewed-on: https://go-review.googlesource.com/20971
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This expression in readsym:
dup != nil && len(dup.P) > 0 && strings.HasPrefix(s.Name, "gclocals·")
can never be true: if dup != nil, then s.Name is ".dup" (and this is not new:
the same broken logic is present in 1.4, at least). Delete the whole block.
Change-Id: I33b14d9a82b292116d6fd79d22b38e3842501317
Reviewed-on: https://go-review.googlesource.com/20970
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The obj.Nocache helper was only used by the arm back end, move it there.
Change-Id: I5c9faf995499991ead1f3d8c8ffc3b6af7346876
Reviewed-on: https://go-review.googlesource.com/20868
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Add a special helper for its one external use.
This is in preparation for an upcoming CL.
Passes toolstash -cmp / buildall.
Change-Id: I9d3463792afe220cc4bc89269bdecf0279abd281
Reviewed-on: https://go-review.googlesource.com/20933
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL addresses a long standing CL by rsc by pushing the use of
Link.Windows down to its two users.
Link.Window was always initalised with the value of runtime.GOOS so
this does not affect cross compilation.
Change-Id: Ibbae068f8b5aad06336909691f094384caf12352
Reviewed-on: https://go-review.googlesource.com/20869
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
'b' is a standard verb for floating point values. The runes like '+'
and '#' are called "flags" by package fmt's documentation. The flag
'-' controls left/right justification, not anything related to signs.
Change-Id: Ia9cf81b002df373f274ce635fe09b5bd0066aa1c
Reviewed-on: https://go-review.googlesource.com/20930
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Another object file change, gives a reasonable improvement:
name old s/op new s/op delta
LinkCmdGo 0.46 ± 3% 0.44 ± 9% -3.34% (p=0.000 n=98+82)
LinkJuju 4.09 ± 4% 3.92 ± 5% -4.30% (p=0.000 n=98+99)
I guess the data section could be mmap-ed instead of read, I haven't tried
that.
Change-Id: I959eee470a05526ab1579e3f5d3ede41c16c954f
Reviewed-on: https://go-review.googlesource.com/20928
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
In tests TransportPersistConnLeak and TransportPersistConnLeakShortBody,
there's a fixed wait time (100ms and 400ms respectively) to allow
goroutines to exit after CloseIdleConnections is called. This
is sometimes too short on a slow host running many simultaneous
tests.
This CL replaces the fixed sleep in each test with a sequence of
shorter sleeps, testing the number of remaining goroutines until
it reaches the threshold or an overall time limit of 500ms expires.
This prevents some failures in the plan9_arm builder, while reducing
the test time on faster machines.
Fixes#14887
Change-Id: Ia5c871062df139e2667cdfb2ce8283e135435318
Reviewed-on: https://go-review.googlesource.com/20922
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
For a long time varexpr has handled ODOT incorrectly: it has always
returned false. Before https://golang.org/cl/20890 this has been
because an ODOT had a Right field with an ONAME with no Class, for which
varexpr returns false. CL 20890 preserved the behavior of varexpr for
ODOT, so that the change would pass toolstash -cmp.
This CL fixes varexpr so that ODOT can return true in some cases. This
breaks toolstash -cmp. While the changed compiler allocates temporary
variables in a different order, I have not been able to find any
examples where the generated code is different, other than using
different stack offsets and, in some cases, registers. It seems that
other parts of the compiler will force the ODOT into a temporary anyhow.
Still, this change is clearly correct, and is a minor compiler cleanup.
Change-Id: I71506877aa3c13966bb03c281aa16271ee7fe80a
Reviewed-on: https://go-review.googlesource.com/20907
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Historically ODOT and friends have been considered to cost an extra
budget point when deciding whether they should be inlined, because they
had an ONAME node that represented the name to the right of the dot.
This doesn't really make sense, as in general that symbol does not add
any extra instructions; it just affects the offset of the load or store
instruction. And the ONAME node is gone now. So, remove the extra
cost.
This does not pass toolstash -cmp, as it changes inlining decisions.
For example, mspan.init in runtime/mheap.go is now considered to be an
inlining candidate.
Change-Id: I5ad27f08c66fd5daa4c8472dd0795df989183f5e
Reviewed-on: https://go-review.googlesource.com/20891
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reduces size of archives in pkg/linux_amd64 by 3% from 41.5MB to 40.2MB
Change-Id: Id64ca7995de8dd84c9e7ce1985730927cf4bfd66
Reviewed-on: https://go-review.googlesource.com/20912
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Deduplicate the verb switch for signed and unsigned integer formatting.
Make names of integer related functions consistent
with names of other fmt functions.
Consolidate basic integer tests.
Change-Id: I0c19c24f1c2c06a3b1a4d7d377dcdac3b36bb0f5
Reviewed-on: https://go-review.googlesource.com/20831
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
In golang.org/cl/20602, I changed the semantics of Eqtype to stop
checking the receiver parameters for type equality, and pushed this
responsibility to addmethod (the only Eqtype caller that cared).
However, I accidentally made the check stricter by making it start
requiring that receiver names were identical.
In general, this is a non-problem because the receiver names in export
data will always match the original source. But running
GO_GCFLAGS=-newexport ./all.bash at one point tries to load both old
and new format export data for package sync, which reveals the
problem. (See golang.org/issue/14877 for details.)
Easy fix: just check the receiver type for type equality in addmethod,
instead of the entire receiver parameter list.
Fixes#14877.
Change-Id: If10b79f66ba58a1b7774622b4fbad1916aba32f1
Reviewed-on: https://go-review.googlesource.com/20906
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Most 64-bit x86 ops can only take a signed 32-bit constant.
Clean up our rewrite rules to enforce this restriction.
Modify the assembler to fail if the offset does not fit
in the instruction.
That last check triggers a few times on weird testing code.
Suppress those errors if the compiler itself generated errors.
Fixes#14862
Change-Id: I76559af035b38483b1e59621a8029fc66b3a5d1e
Reviewed-on: https://go-review.googlesource.com/20815
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Changes the integer function to restore the original f.zero value
and therefore padding type before returning.
Change-Id: I456449259a3d39bd6d62e110553120c31ec63f23
Reviewed-on: https://go-review.googlesource.com/20512
Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
handleMethods can format Error() and String() directly as its known
these return strings that can be directly printed using fmtString.
Remove the obsolete depth argument from handleMethods.
Remove the depth argument from printArg since it is only ever
called with depth set to 0. Recursion for formatting complex
arguments is handled only by printValue which keeps track of depth.
Change-Id: I4c4be588751de12ed999e7561a51bc168eb9eb2d
Reviewed-on: https://go-review.googlesource.com/20911
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
The Node type ODOT and its variants all represent a selector, with a
simple name to the right of the dot. Before this change this was
represented by using an ONAME Node in the Right field. This ONAME node
served no useful purpose. This CL changes these Node types to store the
symbol in the Sym field instead, thus not requiring allocating a Node
for each selector.
When compiling x/tools/go/types this CL eliminates nearly 5000 calls to
newname and reduces the total number of Nodes allocated by about 6.6%.
It seems to cut compilation time by 1 to 2 percent.
Getting this right was somewhat subtle, and I added two dubious changes
to produce the exact same output as before. One is to ishairy in
inl.go: the ONAME node increased the cost of ODOT and friends by 1, and
I retained that, although really ODOT is not more expensive than any
other node. The other is to varexpr in walk.go: because the ONAME in
the Right field of an ODOT has no class, varexpr would always return
false for an ODOT, although in fact for some ODOT's it seemingly ought
to return true; I added an && false for now. I will send separate CLs,
that will break toolstash -cmp, to clean these up.
This CL passes toolstash -cmp.
Change-Id: I4af8a10cc59078c436130ce472f25abc3a9b2f80
Reviewed-on: https://go-review.googlesource.com/20890
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Consider functions with an ODCLCONST for inlining and modify exprfmt to
ignore those nodes when exporting. Don't add symbols to the export list
if there is no definition. This occurs when OLITERAL symbols are looked
up via Pkglookup for non-exported symbols.
Fixes#7655
Change-Id: I1de827850f4c69e58107447314fe7433e378e069
Reviewed-on: https://go-review.googlesource.com/20773
Run-TryBot: Todd Neal <todd@tneal.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Missed this in review of 20812
Change-Id: I01e220499dcd58e1a7205e2a577dd9630a8b7174
Reviewed-on: https://go-review.googlesource.com/20819
Reviewed-by: Keith Randall <khr@golang.org>
Remove rewriting of flags before calling formatters.
Change Flag method to directly take plusV and sharpV flags
into account when reporting if plus or sharp flag is set.
Change-Id: Ic3423881ad89e5a5f9fff5ab59e842062394ef6d
Reviewed-on: https://go-review.googlesource.com/20859
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
This ought to revert the bad effects of
https://go-review.googlesource.com/#/c/20775/
If you don't pass BOOT_GO_GCFLAGS, you get the
old behavior.
Tweaked to allow multiple space-separated flags in
BOOT_GO_GCFLAGS.
Change-Id: I2a22a04211b4535d1c5a8ec7a8a78cb051161c31
Reviewed-on: https://go-review.googlesource.com/20871
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
plan9, nacl, and netbsd to be precise.
Only the first test causes a hang, but just to be sure.
Change-Id: I400bb356ee2a0cf12c8666c95af79c924d1629aa
Reviewed-on: https://go-review.googlesource.com/20839
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Phi splitting sometimes leads to a phi with only a single predecessor.
This must be replaced with a copy to maintain a valid SSA form.
Fixes#14857
Change-Id: I5ab2423fb6c85a061928e3206b02185ea8c79cd7
Reviewed-on: https://go-review.googlesource.com/20826
Reviewed-by: Keith Randall <khr@golang.org>
API is not exposed yet.
Change-Id: I729360ef2be1d8ea683ca93cdb1763897cc8657c
Reviewed-on: https://go-review.googlesource.com/18895
Reviewed-by: Russ Cox <rsc@golang.org>
testing.go:
- run method will evolve into the Run method.
- added level field in common
benchmark.go:
- benchContext will be central to distinguish handling of benchmarks
between normal Run methods and ones called from within Benchmark
function.
- expandCPU will evolve into the processing hook for Run methods
called within normal processing.
- runBench will evolve into the Run method.
Change-Id: I1816f9985d5ba94deb0ad062302ea9aee0bb5338
Reviewed-on: https://go-review.googlesource.com/18894
Reviewed-by: Russ Cox <rsc@golang.org>
The biggest change is that each test is now responsible for managing
the starting and stopping of its parallel subtests.
The "Main" test could be run as a tRunner as well. This shows that
the introduction of subtests is merely a generalization of and
consistent with the current semantics.
Change-Id: Ibf8388c08f85d4b2c0df69c069326762ed36a72e
Reviewed-on: https://go-review.googlesource.com/18893
Reviewed-by: Russ Cox <rsc@golang.org>
There's nothing guaranteeing that the *Regexp isn't in active use,
and so copying the sync.Mutex value is invalid.
Updates #14839.
Change-Id: Iddf52bf69df1b563377922399f64a571f76b95dd
Reviewed-on: https://go-review.googlesource.com/20841
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
This seems to help the problem reported in #14606; this
change seems to produce about a 4% improvement (mostly
for the 128-8192 shards).
Fixes#14789.
Change-Id: I1bd52c82d4ca81d9d5e9ab371fdfc860d7e8af50
Reviewed-on: https://go-review.googlesource.com/20660
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Improve the test by also translating " " to "_".
Fixes#14671.
Change-Id: Ie5997934b93c7663d7b8432244fad47bb5d3ffbe
Reviewed-on: https://go-review.googlesource.com/20714
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is intended to help debug compiler problems that pop
up in the bootstrap phase of make.bash. GO_GCFLAGS does not
normally apply there. Options-for-all phases is intended
to allow crude tracing (and full timing) by turning on timing
for all phases, not just one.
Phase names can also be specified using a regular expression,
for example
BOOT_GO_GCFLAGS=-d='ssa/~^.*scc$/off' \
GO_GCFLAGS='-d=ssa/~^.*scc$/off' ./make.bash
I just added this because it was the fastest way to get
me to a place where I could easily debug the compiler.
Change-Id: I0781f3e7c19651ae7452fa25c2d54c9a245ef62d
Reviewed-on: https://go-review.googlesource.com/20775
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change makes unexposed methods start with lowercase letters for
avoiding unnecessary confusion because the net package uses many
embedding structures and intrefaces for controlling exposure of APIs.
Note that this change leaves DNS-related methods as they are.
Change-Id: I253758d1659175c5d0af6b2efcd30ce83f46543d
Reviewed-on: https://go-review.googlesource.com/20784
Run-TryBot: Mikio Hara <mikioh.mikioh@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The critical phase did not correctly maintain the use count
when two predecessors of a new critical block transmit the
same value.
Change-Id: Iba802c98ebb84e36a410721ec32c867140efb6d4
Reviewed-on: https://go-review.googlesource.com/20822
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Todd Neal <todd@tneal.org>
* This the simplest solution I could came up with
that doesn't required changing the compiler.
* The bound checks become constants now
so they are removed during opt phase.
Updates #14808
Change-Id: If32c33d7ec08bb400321b465015d152f0a5d3001
Reviewed-on: https://go-review.googlesource.com/20654
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Make sure we don't generate write barriers in runtime
code that is marked to forbid write barriers.
Implement the optimization that if we're writing a sliced
slice back to the location it came from, we don't need a
write barrier.
Fixes#14784
Change-Id: I04b6a3b2ac303c19817e932a36a3b006de103aaa
Reviewed-on: https://go-review.googlesource.com/20791
Reviewed-by: Austin Clements <austin@google.com>
Reduces size of archives in pkg/linux_amd64 by 1.4MB (3.2%),
slightly improving link time.
name old s/op new s/op delta
LinkCmdGo 0.52 ± 3% 0.51 ± 2% -0.65% (p=0.000 n=98+99)
Change-Id: I7e265f4d4dd08967c5c5d55c1045e533466bbbec
Reviewed-on: https://go-review.googlesource.com/20802
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Boolean expressions involving t.Thistuple were converted to use
t.Recv(), because it's a bit clearer and will hopefully reveal cases
where we could remove redundant calls to t.Recv() (in followup CLs).
The other cases were all converted to use t.Recvs().NumFields(),
t.Params().NumFields(), or t.Results().NumFields().
Change-Id: I4df91762e7dc4b2ddae35995f8dd604a52c09b09
Reviewed-on: https://go-review.googlesource.com/20796
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
We never need a type hash for a method type, so skip trying to
overwrite Thistuple.
Change-Id: I8de6480ba5fd321dfa134facf7661461d298840e
Reviewed-on: https://go-review.googlesource.com/20795
Reviewed-by: Russ Cox <rsc@golang.org>
This is an automated rewrite of all the calls of the form:
for f, it := IterFields(t); f != nil; f = it.Next() { ... }
Followup CLs will work on cleaning up the remaining cases.
Change-Id: Ic1005ad45ae0b50c63e815e34e507e2d2644ba1a
Reviewed-on: https://go-review.googlesource.com/20794
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Analogous to the Nodes type used as a more space efficient []*Node
representation.
Passes toolstash -cmp.
Change-Id: I8341e45304777d6e4200bd36dadc935b07ccf3ff
Reviewed-on: https://go-review.googlesource.com/20793
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
For every string constant the compiler was creating 2 Sym's and 2
Node's. It would never refer to them again, but would keep them alive
in gostringpkg. This changes the code to just use obj.LSym's instead.
When compiling x/tools/go/types, this yields about a 15% reduction in
the number of calls to newname and a 3% reduction in the total number of
Node objects. Unfortunately I couldn't see any change in compile time,
but reducing memory usage is desirable anyhow.
Passes toolstash -cmp.
Change-Id: I24f1cb1e6cff0a3afba4ca66f7166874917a036b
Reviewed-on: https://go-review.googlesource.com/20792
Reviewed-by: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This should probably be considered "experimental" at this stage, but
what it needs is feedback from adventurous adopters. I think the data
structure used for describing escape reasons might be extendable to
allow a cleanup of the underlying algorithms, which suffers from
insufficiently separated concerns (the graph does not deal well with
escape level adjustments, so it is augmented by a second custom-walk
portion of the "flood" phase. It would be better to put it all,
including level adjustments, in a single graph structure, and then
simply flood the graph.
Tweaked to avoid allocations in the no-logging case.
Modified run.go to ignore lines with leading "#" in the output (since
it can never match a line), and in -update_errors to ignore leading
tabs in output lines and to normalize embedded filenames.
Currently requires -m -m because otherwise the noise/update
burden for the other escape tests is considerable.
There is a partial test. Existing escape analysis tests seem to
cover all except the panic case and what looks like it might be
unreachable code in escape analysis.
Fixes#10526.
Change-Id: I2524fdec54facae48b00b2548e25d9e46fcaf832
Reviewed-on: https://go-review.googlesource.com/18041
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
If a phi has duplicate arguments, then the new block that is constructed
to remove the critical edge can be used for all of the duplicate
arguments.
read-only data = -904 bytes (-0.058308%)
global text (code) = -2240 bytes (-0.060056%)
Total difference -3144 bytes (-0.056218%)
Change-Id: Iee3762744d6a8c9d26cdfa880bb23feb62b03c9c
Reviewed-on: https://go-review.googlesource.com/20746
Run-TryBot: Todd Neal <todd@tneal.org>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Between the enumeration of fdsToClose in the parent and the
closing of fds in the child, it's possible for a file to be
closed in another thread. If that file descriptor is reused
when opening the child-parent status pipe, it will be closed
prematurely in the child and the forkExec gets out of sync.
This has been observed to cause failures in builder tests
when the link step of a build is started before the compile
step has run, with "file does not exist" messages as the
visible symptom.
The simple workaround is to check against closing the pipe.
A more comprehensive solution would be to rewrite the fd
closing code to avoid races, along the lines of the long
ago proposed https://golang.org/cl/57890043 - but meanwhile
this correction will prevent some builder failures.
Change-Id: I4ef5eaea70c21d00f4df0e0847a1c5b2966de7da
Reviewed-on: https://go-review.googlesource.com/20800
Run-TryBot: David du Colombier <0intro@gmail.com>
Reviewed-by: David du Colombier <0intro@gmail.com>
Separate unicode formatting into its own fmt_unicode function.
Remove the fmtUnicode wrapper and the f.unicode and f.uniQuote
flags that are not needed anymore. Remove mangling and restoring
of the precision and sharp flags.
Removes the buffer copy needed for %#U by moving
the character encoding before the number encoding.
Changes the behavior of plus and space flag to have
no effect instead of printing a plus or space before "U+".
Always print at least four digits after "U+"
even if precision is set to less than 4.
Change-Id: If9a0ee79e9eca2c76f06a4e0fdd75d98393899ac
Reviewed-on: https://go-review.googlesource.com/20574
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Keep track of how many uses each Value has. Each appearance in
Value.Args and in Block.Control counts once.
The number of uses of a value is generically useful to
constrain rewrite rules. For instance, we might want to
prevent merging index operations into loads if the same
index expression is used lots of times.
But I have one use in particular for which the use count is required.
We must make sure we don't combine ops with loads if the load has
more than one use. Otherwise, we may split a single load
into multiple loads and that breaks perceived behavior in
the presence of races. In particular, the load of m.state
in sync/mutex.go:Lock can't be done twice. (I have a separate
CL which triggers the mutex failure. This CL has a test which
demonstrates a similar failure.)
Change-Id: Icaafa479239f48632a069d0c3f624e6ebc6b1f0e
Reviewed-on: https://go-review.googlesource.com/20790
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Todd Neal <todd@tneal.org>
When building shared libraries, all symbols on Allsym are marked reachable.
What I didn't realize was that this includes the ".dup" symbols created when
"dupok" symbols are read from multiple package files. This breaks now because
deadcode makes some assumptions that fail for these ".dup" symbols, but in any
case was a bad idea -- I suspect this change makes libstd.so a bunch smaller,
but creating it was broken before this CL so I can't be sure.
This change simply stops adding these symbols to Allsym, which might make some
of the many iterations over Allsym the linker does a touch quicker, although
that's not the motivation here.
Add a test that no symbols called ".dup" makes it into the runtime shared
library.
Fixes#14841
Change-Id: I65dd6e88d150a770db2d01b75cfe5db5fd4f8d25
Reviewed-on: https://go-review.googlesource.com/20780
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Receiver parameters generally aren't relevant to the function
signature type. In particular:
1. When checking whether a type's method implements an interface's
method, we specifically want to ignore the receiver parameters,
because they'll be different.
2. When checking interface type equality, interface methods always
use the same "fakethis" *struct{} type as their receiver.
3. Finally, method expressions and method values degenerate into
receiver-less function types.
The only case where we care about receiver types matching is in
addmethod, which is easily handled by adding an extra Eqtype check of
the receiver parameters. Also, added a test for this, since
(surprisingly) there weren't any.
As precedence, go/types.Identical ignores receiver parameters when
comparing go/types.Signature values.
Notably, this allows us to slightly simplify the "implements"
function, which is used for checking whether type/interface t
implements interface iface. Currently, cmd/compile actually works
around Eqtype's receiver parameter checking by creating new throwaway
TFUNC Types without the receiver parameter.
(Worse, the compiler currently only provides APIs to build TFUNC Types
from Nod syntax trees, so building those throwaway types also involves
first building throwaway syntax trees.)
Passes toolstash -cmp.
Change-Id: Ib07289c66feacee284e016bc312e8c5ff674714f
Reviewed-on: https://go-review.googlesource.com/20602
Reviewed-by: Robert Griesemer <gri@golang.org>
Add a C.CBytes function to copy a Go byte slice into C memory. This
returns an unsafe.Pointer, since that is what needs to be passed to
C.free, and the data is often opaque bytes anyway.
Fixes#14838
Change-Id: Ic7bc29637eb6f1f5ee409b3898c702a59833a85a
Reviewed-on: https://go-review.googlesource.com/20762
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently we generate write barriers when the right side of an
assignment is a global function. This doesn't fall into the existing
case of storing an address of a global because we haven't lowered the
function to a pointer yet.
This write barrier is unnecessary, so eliminate it.
Fixes#13901.
Change-Id: Ibc10e00a8803db0fd75224b66ab94c3737842a79
Reviewed-on: https://go-review.googlesource.com/20772
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
c2go translated writing and advancing a pointer using slices.
Switch to something more idiomatic.
It is also more efficient, but not enough to matter.
Change-Id: I67709632ac53253615a35365824ae97bbe5458d5
Reviewed-on: https://go-review.googlesource.com/20767
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The parser code was not reachable ever since some of the lexer cleanups.
We could recognize '~' in the lexer, complain, and return a '^' instead,
but it's been a few years since Go was new and this may have been a use-
ful error. The lexer complains with "illegal character U+007E '~'" which
is good enough.
For #13244.
Change-Id: Ie3283738486eb6f8462d594f2728ac98333c0520
Reviewed-on: https://go-review.googlesource.com/20768
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Use a local variable instead.
Passes toolstash -cmp.
Change-Id: I9623a40ff0d568f11afd1279b6aaa1c33eda644c
Reviewed-on: https://go-review.googlesource.com/20730
Reviewed-by: Ian Lance Taylor <iant@golang.org>
We're about to add another root marking job that needs to happen only
during the first markroot pass (whether that's concurrent or STW),
just like finalizer scanning. Rather than introducing another flag
that has the same value as finalizersDone, just rename finalizersDone
to markrootDone.
Change-Id: I535356c6ea1f3734cb5b6add264cb7bf48de95e8
Reviewed-on: https://go-review.googlesource.com/20043
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently shinkstack is only safe during STW because it adjusts
channel-related stack pointers and moves send/receive stack slots
without synchronizing with the channel code. Make it safe to use when
the world isn't stopped by:
1) Locking all channels the G is blocked on while adjusting the sudogs
and copying the area of the stack that may contain send/receive
slots.
2) For any stack frames that may contain send/receive slot, using an
atomic CAS to adjust pointers to prevent races between adjusting a
pointer in a receive slot and a concurrent send writing to that
receive slot.
In principle, the synchronization could be finer-grained. For example,
we considered synchronizing around the sudogs, which would allow
channel operations involving other Gs to continue if the G being
shrunk was far enough down the send/receive queue. However, using the
channel lock means no additional locks are necessary in the channel
code. Furthermore, the stack shrinking code holds the channel lock for
a very short time (much less than the time required to shrink the
stack).
This does not yet make stack shrinking concurrent; it merely makes
doing so safe.
This has negligible effect on the go1 and garbage benchmarks.
For #12967.
Change-Id: Ia49df3a8a7be4b36e365aac4155a2416b94b988c
Reviewed-on: https://go-review.googlesource.com/20042
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
Currently, locking a G's stack by setting its status to _Gcopystack or
_Gscan is unordered with respect to channel locks. However, when we
make stack shrinking concurrent, stack shrinking will need to lock the
G and then acquire channel locks, which imposes an order on these.
Document this lock ordering and fix closechan to respect it.
Everything else already happens to respect it.
For #12967.
Change-Id: I4dd02675efffb3e7daa5285cf75bf24f987d90d4
Reviewed-on: https://go-review.googlesource.com/20041
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently sudog.elem is never accessed concurrently, so in several
cases we drop the channel lock just before reading/writing the
sent/received value from/to sudog.elem. However, concurrent stack
shrinking is going to have to adjust sudog.elem to point to the new
stack, which means it needs a way to synchronize with accesses to
sudog.elem. Hence, add sudog.elem to the fields protected by
hchan.lock and scoot the unlocks down past the uses of sudog.elem.
While we're here, better document the channel synchronization rules.
For #12967.
Change-Id: I3ad0ca71f0a74b0716c261aef21b2f7f13f74917
Reviewed-on: https://go-review.googlesource.com/20040
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
With concurrent stack shrinking, the stack can move the instant after
a G enters _Gwaiting. There are only two places that put a G into
_Gwaiting: gopark and newstack. We fixed uses of gopark. This commit
fixes newstack by simplifying its G transitions and, in particular,
eliminating or narrowing the transient _Gwaiting states it passes
through so it's clear nothing in the G is accessed while in _Gwaiting.
For #12967.
Change-Id: I2440ead411d2bc61beb1e2ab020ebe3cb3481af9
Reviewed-on: https://go-review.googlesource.com/20039
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
gopark calls the unlock function after setting the G to _Gwaiting.
This means it's generally unsafe to access the G's stack from the
unlock function because the G may start running on another P. Once we
start shrinking stacks concurrently, a stack shrink could also move
the stack the moment after it enters _Gwaiting and before the unlock
function is called.
Document this restriction and fix the two places where we currently
violate it.
This is unlikely to be a problem in practice for these two places
right now, but they're already skating on thin ice. For example, the
following sequence could in principle cause corruption, deadlock, or a
panic in the select code:
On M1/P1:
1. G1 selects on channels A and B.
2. selectgoImpl calls gopark.
3. gopark puts G1 in _Gwaiting.
4. gopark calls selparkcommit.
5. selparkcommit releases the lock on channel A.
On M2/P2:
6. G2 sends to channel A.
7. The send puts G1 in _Grunnable and puts it on P2's run queue.
8. The scheduler runs, selects G1, puts it in _Grunning, and resumes G1.
9. On G1, the sellock immediately following the gopark gets called.
10. sellock grows and moves the stack.
On M1/P1:
11. selparkcommit continues to scan the lock order for the next
channel to unlock, but it's now reading from a freed (and possibly
reused) stack.
This shouldn't happen in practice because step 10 isn't the first call
to sellock, so the stack should already be big enough. However, once
we start shrinking stacks concurrently, this reasoning won't work any
more.
For #12967.
Change-Id: I3660c5be37e5be9f87433cb8141bdfdf37fadc4c
Reviewed-on: https://go-review.googlesource.com/20038
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently the g.waiting list created by a select is in poll order.
However, nothing depends on this, and we're going to need access to
the channel lock order in other places shortly, so modify select to
put the waiting list in channel lock order.
For #12967.
Change-Id: If0d38816216ecbb37a36624d9b25dd96e0a775ec
Reviewed-on: https://go-review.googlesource.com/20037
Reviewed-by: Rick Hudson <rlh@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
Currently the select lock order is a []*hchan. We're going to need to
refer to things other than the channel itself in lock order shortly,
so switch this to a []uint16 of indexes into the select cases. This
parallels the existing representation for the poll order.
Change-Id: I89262223fe20b4ddf5321592655ba9eac489cda1
Reviewed-on: https://go-review.googlesource.com/20036
Reviewed-by: Rick Hudson <rlh@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Given a G, there's currently no way to find the channel it's blocking
on. We'll need this information to fix a (probably theoretical) bug in
select and to implement concurrent stack shrinking, so record the
channel in the sudog.
For #12967.
Change-Id: If8fb63a140f1d07175818824d08c0ebeec2bdf66
Reviewed-on: https://go-review.googlesource.com/20035
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
gcMarkRootCheck is too expensive to do during mark termination.
However, since it's a useful check and it complements checkmark mode
nicely, enable it during mark termination is checkmark is enabled.
Change-Id: Icd9039e85e6e9d22747454441b50f1cdd1412202
Reviewed-on: https://go-review.googlesource.com/20663
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
I was wondering why cmd/go includes the HTTP server implementations.
Dumping the linker's deadcode dependency graph into a file and doing
some graph analysis, I found that the only reason cmd/go included an
HTTP server was because the maxBytesReader type (used by both the HTTP
transport & HTTP server) did a static type assertion to an HTTP server
type.
Changing it to a interface type assertion reduces the size of cmd/go
by 533KB (5.2%)
On linux/amd64, cmd/go goes from 10549200 to 10002624 bytes.
Add a test too so this doesn't regress. The test uses cmd/go as the
binary to test (a binary which needs the HTTP client but not the HTTP
server), but this change and test are equally applicable to any such
program.
Change-Id: I93865f43ec03b06d09241fbd9ea381817c2909c5
Reviewed-on: https://go-review.googlesource.com/20763
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Step 2 of stream-lining parameter parsing
- do parameter validity checks in parser
- two passes instead of multiple (and theoretically quadratic) passes
when checking parameters
- removes the need for OKEY and some ONONAME nodes in those passes
This removes allocation of ~123K OKEY (incl. some ONONAME) nodes
out of a total of ~10M allocated nodes when running make.bash, or
a reduction of the number of alloacted nodes by ~1.2%.
Change-Id: I4a8ec578d0ee2a7b99892ac6b92e56f8e0415f03
Reviewed-on: https://go-review.googlesource.com/20748
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Robert Griesemer <gri@golang.org>
Use The fmt internal buffer for character formatting instead of
the pp Printer rune decoding buffer.
Uses an uint64 instead of int64 argument to fmt_c and fmt_qc for easier
range checks since no valid runes are represented by negative numbers or
are above 0x10ffff.
Add range checks to fmt_c and fmt_qc to guarantee that a RuneError
character is returned by the functions for any invalid code point
in range uint64. For invalid code points in range utf8.MaxRune
the used utf8 and strconv functions already return a RuneError.
Change-Id: I9772f804dfcd79c3826fa7f6c5ebfbf4b5304a51
Reviewed-on: https://go-review.googlesource.com/20373
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Remove check for %p and %T in printValue.
These verbs are not recursive and are handled already in
printArg which is called on any argument before printValue.
Format the type string for %T directly instead of invoking
the more complex printArg with %s on the type string.
Decouple the %T tests from variables declared in scan_test.go.
Change-Id: Ibd51566bd4cc1a260ce6d052f36382ed05020b48
Reviewed-on: https://go-review.googlesource.com/20622
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
The Join test was doing something remarkable and unnecessary instead of
just using ... on a slice. Maybe it was an editing relic.
Fix it by deleting the monstrosity.
Change-Id: I5b90c6d539d334a9c27e57d26dacd831721cfcfe
Reviewed-on: https://go-review.googlesource.com/20727
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Do a reset of the fmt flags before printing the extra argument
error message to prevent a malformed printing of extra arguments.
Regroup tests for extra argument error strings.
Change-Id: Ifd97f5ca36f6c97ed5a380d975cf154d17997d3f
Reviewed-on: https://go-review.googlesource.com/20571
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
This change filters out destination addresses by address family when
source address is specified to avoid running Dial operation with wrong
addressing scopes.
Fixes#11837.
Change-Id: I10b7a1fa325add2cd8ed58f105d527700a10d342
Reviewed-on: https://go-review.googlesource.com/20586
Reviewed-by: Paul Marks <pmarks@google.com>
On the latest darwin kernels, kevent in runtime-integrated network
poller sometimes reports SYN-SENT state sockets as ESTABLISHED ones,
though it's still unclear what's the root cause.
This change prevents such spurious notifications by additional connect
system calls.
Fixes#14548.
Change-Id: Ie29788e38ca735ca77259befeba3229d6a30ac52
Reviewed-on: https://go-review.googlesource.com/20468
Run-TryBot: Mikio Hara <mikioh.mikioh@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change consolidates functions and methods related to UnixAddr,
UnixConn and UnixListener for maintenance purpose, especially for
documentation.
The followup changes will update comments and examples.
Updates #10624.
Change-Id: I372d152099ac10956284e6b3863d7e4d9fe5c8e9
Reviewed-on: https://go-review.googlesource.com/20125
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change consolidates functions and methods related to IPAddr and
IPConn for maintenance purpose, especially for documentation.
The followup changes will update comments and examples.
Updates #10624.
Change-Id: Ia5146f234225704a3c0b6459e1903e56a7b68134
Reviewed-on: https://go-review.googlesource.com/20124
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change consolidates functions and methods related to UDPAddr and
UDPConn for maintenance purpose, especially for documentation.
The followup changes will update comments and examples.
Updates #10624.
Change-Id: Idfe9be8ea46ade1111b0ae176862b2048eafc7be
Reviewed-on: https://go-review.googlesource.com/20120
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Use constants instead of dynamically computed values to determine
the bit sizes of types similar to how strconv and other packages
directly compute these sizes. Move these constants near the code
that uses them.
Change-Id: I78d113b7e697466097e32653975df5990380c2c1
Reviewed-on: https://go-review.googlesource.com/20514
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
This change also refactors SplitHostPort to avoid using gotos and
naked returns.
Fixes#14827
Change-Id: I4dca528936757fd06da76c23af8a0f6175bbedd1
Reviewed-on: https://go-review.googlesource.com/20726
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
They've been on for a few weeks of general use and nothing
has tripped up on them yet.
Makes the compiler ~18% faster.
Change-Id: I42d7bbc0581597f9cf4fb28989847814c81b08a2
Reviewed-on: https://go-review.googlesource.com/20741
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The obj.Fmt* values are only used by gc/fmt.go, so just move them
there. Also, add comments documenting the correspondance between
FmtFoo names and their flag characters to make understanding the
existing documentation slightly less confusing.
While here, add a new FmtFlag named type to represent these values.
Change-Id: I9631214b892557d094823f1ac575d0c43a84007b
Reviewed-on: https://go-review.googlesource.com/20717
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Change Cond implementation to use a notification list such that waiters
can first register for a notification, release the lock, then actually
wait. Signalers never have to park anymore.
This is intended to address an issue in the previous implementation
where Broadcast could fail to signal all waiters.
Results of the existing benchmark are below.
Original New Diff
BenchmarkCond1-48 2000000 745 ns/op 755 +1.3%
BenchmarkCond2-48 1000000 1545 ns/op 1532 -0.8%
BenchmarkCond4-48 300000 3833 ns/op 3896 +1.6%
BenchmarkCond8-48 200000 10049 ns/op 10257 +2.1%
BenchmarkCond16-48 100000 21123 ns/op 21236 +0.5%
BenchmarkCond32-48 30000 40393 ns/op 41097 +1.7%
Fixes#14064
Change-Id: I083466d61593a791a034df61f5305adfb8f1c7f9
Reviewed-on: https://go-review.googlesource.com/18892
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Caleb Spare <cespare@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
While we're at it, add tests for EncodedLen and DecodedLen.
Fixes#14803.
Change-Id: I200c72cf11c51669b8d9f70c6e57ece359f7ae61
Reviewed-on: https://go-review.googlesource.com/20649
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The type information for a method includes two variants: a func
without the receiver, and a func with the receiver as the first
parameter. The former is used as part of the dynamic interface
checks, but the latter is only returned as a type in the
reflect.Method struct.
Instead of computing it at compile time, construct it at run time
with reflect.FuncOf.
Using cl/20701 as a baseline,
cmd/go: -480KB, (4.4%)
jujud: -5.6MB, (7.8%)
For #6853.
Change-Id: I1b8c73f3ab894735f53d00cb9c0b506d84d54e92
Reviewed-on: https://go-review.googlesource.com/20709
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
All of a struct's fields have to fit into memory anyway, so index them
with int instead of int64. This also makes it nicer for
cmd/compile/internal/gc to reuse the same NumFields function.
Change-Id: I210be804a0c33370ec9977414918c02c675b0fbe
Reviewed-on: https://go-review.googlesource.com/20691
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Remove method type information for pruned methods from any program
that does not reflect on methods. This can be a significant saving:
addr2line: -310KB (8.8%)
A future update might want to consider a more aggressive variant of
this: setting the Type and Func fields of reflect.Method to nil for
unexported methods. That would shrink cmd/go by 2% and jujud by 2.6%
but could be considered an API change. So this CL sticks to the
uncontroversial change.
For #6853.
Change-Id: I5d186d9f822dc118ee89dc572c4912a3b3c72577
Reviewed-on: https://go-review.googlesource.com/20701
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Make sure symbol gets carried along by load-combining rule.
Add the new load into the right block where we know that
mem is live.
Use auxInt field to carry i along instead of an explicit ADDQ.
Incorporate LEA ops into MOVBQZX and friends.
Change-Id: I587f7c6120b98fd2a0d48ddd6ddd13345d4421b4
Reviewed-on: https://go-review.googlesource.com/20732
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Todd Neal <todd@tneal.org>
Turns out there were only two call sites that expected
t.Field(t.NumFields()) to return nil.
Change-Id: I4679988d38ee9d7c9d89883537a17046717b2a77
Reviewed-on: https://go-review.googlesource.com/20731
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
On my Mac I am in group 5000 which apparently has no name
(I suspect because it is an LDAP group and I cannot reach the
LDAP server). Do not make the test fail in that case.
Fixes#14806
Change-Id: I56b11a8e86b048abfb00812eaad37802fd2adcc5
Reviewed-on: https://go-review.googlesource.com/20710
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Symbols in the object file currently refer to each other using symbol name
and version. Referring to the same symbol many times in an object file takes
up space and causes redundant map lookups. Instead write out a list of unique
symbol references and have symbols refer to each other using indexes into this
list.
Credit to Michael Hudson-Doyle for kicking this off.
Reduces pkg/linux_amd64 size by 30% from 61MB to 43MB
name old s/op new s/op delta
LinkCmdGo 0.74 ± 3% 0.63 ± 4% -15.22% (p=0.000 n=20+20)
LinkJuju 6.38 ± 6% 5.73 ± 6% -10.16% (p=0.000 n=20+19)
Change-Id: I7e101a0c80b8e673a3ba688295e6f80ea04e1cfb
Reviewed-on: https://go-review.googlesource.com/20099
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
CL 14603 attempted to preserve the callee-save registers for
the darwin/arm runtime initialization routine, but I believe it
wasn't sufficient and resulted in the crash reported in issue
Saving and restoring the registers on the stack the same way
linux/arm does seems more obvious and fixes#14778, so do that.
Even though #14778 is not reproducible on darwin/arm64, I applied
a similar change there, and to linux/arm64 which obeys the same
calling convention.
Finally, this CL is a candidate for a 1.6 minor release for the same
reason CL 14603 was in a 1.5 minor release (as CL 16968). It is
small and only touches the iOS platforms and gomobile on darwin/arm
is currently useless without it.
Fixes#14778Fixes#12590 (again)
Change-Id: I7401daf0bbd7c579a7e84761384a7b763651752a
Reviewed-on: https://go-review.googlesource.com/20621
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Move the C header style architecture constants to the per arch Main
methods.
Change-Id: Ie7ff39baa275ceaa6680e7d16441ca9f0aa12597
Reviewed-on: https://go-review.googlesource.com/20722
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Partial automatic cleanup driven by Dominik Honnef's unused tool.
As _lookup now only has one caller, merge it into the caller and remove
the conditional create logic.
Change-Id: I2ea354d9d4b32a19905271eca74725231b6d8a93
Reviewed-on: https://go-review.googlesource.com/20589
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is a band-aid, but it fixes the problem
until a deeper fix is in place.
Testing with genpkg -n 50000, I see:
Before:
154.67 real 184.66 user 3.15 sys
After:
61.82 real 96.99 user 2.17 sys
Fixes#14781.
Change-Id: I24c7822d60c289bdd6a18a7840b984954c95f7d4
Reviewed-on: https://go-review.googlesource.com/20696
Reviewed-by: Robert Griesemer <gri@golang.org>
Treat the verb %X in the same special way as %q, %s and %x
are for arrays and slices with byte type elements.
Modify input for tests so the result of %x and %X is distinct.
Change-Id: I38d227755e98c7fad5e4adc2f603c6873aa910fd
Reviewed-on: https://go-review.googlesource.com/20516
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Change-Id: I928f51a1fe4830a81d4f5d3eb572785e06a75b77
Reviewed-on: https://go-review.googlesource.com/20581
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Another step towards hooking up exported inlined function bodies.
Change-Id: Ib8094b03ac7970fee0e51b5826b5f8aa232e23fb
Reviewed-on: https://go-review.googlesource.com/20605
Reviewed-by: Alan Donovan <adonovan@google.com>
Run-TryBot: Robert Griesemer <gri@golang.org>
Currently, the only use for this is on the Left side of OKEY nodes
within struct literals. esc and fmt only care so they can recognize
that the ONAME nodes are actually field names, which need special
handling.
sinit additionally needs to know the field's offset within the struct,
which we can provide via Xoffset.
Passes toolstash/buildall.
Change-Id: I362d965e161f4d80fcd9c9bae0dfacc657dc0b29
Reviewed-on: https://go-review.googlesource.com/20676
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Switch TSTRUCT and TINTER to use Fields instead of Type, which wrings
out the remaining few direct uses of the latter.
Preparation for converting fields to use a separate "Field" type.
Passes toolstash/buildall.
Change-Id: I5a2ea7e159d0dde1be2c9afafc10a8f739d95743
Reviewed-on: https://go-review.googlesource.com/20675
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
String symbols' names used to appear in the final binary.
Using a string's contents as it's symbol's name
was a thus a bad idea if the string's name was long.
Recent improvements by crawshaw have changed that.
Instead of placing long strings behind opaque names
in local packages, place them in the global string
package and make them content-addressable.
Symbol names still occur in the object files,
so use a hash to avoid needless length there.
Reduces the size of cmd/go by 30k.
Change-Id: Ifdbbaf47bf44352418c90ddd903d5106e48db4f1
Reviewed-on: https://go-review.googlesource.com/20524
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
decompose-builtin pass requires an opt pass, but -N disables
late-opt, the only opt pass (out of two) that happens
after decompose-builtin. This CL enables both 'opt' and 'late opt'
passes. The extra compile time for 'late opt' in negligible
since most rewrites were already done in the first 'opt'
(also measured before). We should put some effort in splitting the
generic rules into required and optional.
Also update generic.rules comments about lowering
of StringMake and SliceMake.
Tested with GO_GCFLAGS=-N ./all.bash
Change-Id: I92999681aaa02587b6dc6e32ce997a91f1fc9499
Reviewed-on: https://go-review.googlesource.com/20682
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Parts of the SSA compiler in package gc contain amd64-specific code,
most notably Prog generation. Move this code into package amd64, so that
other architectures can be added more easily.
In package gc, this change is just moving code. There are no functional
changes or even any larger structural changes beyond changing function
names (mostly for export).
In the cmd/compile/internal/ssa/gen tool, more information is included
in arch to remove the AMD64-specific behavior in the main portion of the
tool. The generated opGen.go is identical.
Change-Id: I8eb37c6e6df6de1b65fa7dab6f3bc32c29daf643
Reviewed-on: https://go-review.googlesource.com/20609
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In particular, write down the rules for stack ownership because the
details of this are about to get very important with concurrent stack
shrinking. (Interestingly, the details don't actually change, but
anything that's currently skating on thin ice is likely to fall
through.)
Fox #12967.
Change-Id: I561e2610e864295e9faba07717a934aabefcaab9
Reviewed-on: https://go-review.googlesource.com/20034
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently copystack adjusts pointers in the old stack and then copies
the adjusted stack to the new stack. In addition to being generally
confusing, this is going to make concurrent stack shrinking harder.
Switch this around so that we first copy the stack and then adjust
pointers on the new stack (never writing to the old stack).
This reprises CL 15996, but takes a different and simpler approach. CL
15996 still walked the old stack while adjusting pointers on the new
stack. In this CL, we adjust auxiliary structures before walking the
stack, so we can just walk the new stack.
For #12967.
Change-Id: I94fa86f823ba9ee478e73b2ba509eed3361c43df
Reviewed-on: https://go-review.googlesource.com/20033
Reviewed-by: Rick Hudson <rlh@golang.org>
In particular, document that *sel is on the stack no matter what.
Change-Id: I1c264215e026c27721b13eedae73ec845066cdec
Reviewed-on: https://go-review.googlesource.com/20032
Reviewed-by: Rick Hudson <rlh@golang.org>
Line numbers are always int32, so the Warnl function should take the
line number as an int32 as well. This matches gc.Warnl and removes
a cast every place it's used.
Change-Id: I5d6201e640d52ec390eb7174f8fd8c438d4efe58
Reviewed-on: https://go-review.googlesource.com/20662
Run-TryBot: Todd Neal <todd@tneal.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Just recognize "DATA" as a special pseudo op word in the assembler
directly.
Change-Id: I508e111fd71f561efa600ad69567a7089a57adb2
Reviewed-on: https://go-review.googlesource.com/20648
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
The only remaining place that generated ADATA
Prog was the assembler. Stop, and delete some
now-dead code.
Passes toolstash -cmp.
Change-Id: I26578ff1b4868e98562b44f69d909c083e96f8d5
Reviewed-on: https://go-review.googlesource.com/20646
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Instead of generating ADATA instructions for
static data, write that static data directly
into the linker sym.
This is considerably more efficient.
The assembler still generates
ADATA instructions, so the ADATA machinery
cannot be dismantled yet. (Future work.)
Skipping ADATA has a significant impact
compiling the unicode package, which has lots
of static data.
name old time/op new time/op delta
Unicode 227ms ±10% 192ms ± 4% -15.61% (p=0.000 n=29+30)
name old alloc/op new alloc/op delta
Unicode 51.0MB ± 0% 45.8MB ± 0% -10.29% (p=0.000 n=30+30)
name old allocs/op new allocs/op delta
Unicode 610k ± 0% 578k ± 0% -5.29% (p=0.000 n=30+30)
This does not pass toolstash -cmp, because
this changes the order in which some relocations
get added, and thus it changes the output from
the compiler. It is not worth the execution time
to sort the relocs in the normal case.
However, compiling with -S -v generates identical
output if (1) you suppress printing of ADATA progs
in flushplist and (2) you suppress printing of
cpu timing. It is reasonable to suppress printing
the ADATA progs, since the data itself is dumped
later. I am therefore fairly confident that all
changes are superficial and non-functional.
Fixes#14786, although there's more to do
in general.
Change-Id: I8dfabe7b423b31a30e516cfdf005b62a2e9ccd82
Reviewed-on: https://go-review.googlesource.com/20645
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
And fix the wrong comment.
Initially found this because the comment was wrong about the possible
values. Then noticed that there doesn't seem to be any reason to use
uintptr over SelectDir.
Change-Id: I4f9f9640e49d89e558ed00bd99e57dab890785f5
Reviewed-on: https://go-review.googlesource.com/20655
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Only compute the number of maximum allowed elements per slice once.
Special case newcap computation for slices with byte sized elements.
name old time/op new time/op delta
GrowSliceBytes-2 61.1ns ± 1% 43.4ns ± 1% -29.00% (p=0.000 n=20+20)
GrowSliceInts-2 85.9ns ± 1% 75.7ns ± 1% -11.80% (p=0.000 n=20+20)
Change-Id: I5d9c0d5987cdd108ac29dc32e31912dcefa2324d
Reviewed-on: https://go-review.googlesource.com/20653
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It was failing like "unknown groupid ᎈ|" instead of "unknown groupid
5000" due to the conversion from int to string.
Updates #14806
Change-Id: I83e4b478ff628ad4053573a9f32b3fadce22e847
Reviewed-on: https://go-review.googlesource.com/20642
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
* Shaves about 10k from pkg/tools/linux_amd64.
* Was suggested by drchase before
* Found by looking at ssa output of #14758
Change-Id: If2c4ddf3b2603d4dfd8fb4d9199b9a3dcb05b17d
Reviewed-on: https://go-review.googlesource.com/20570
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This makes the output of compiling with -S more
stable in the face of unimportant variation in the
order in which relocs are generated.
It is also more pleasant to read the relocs when
they are sorted.
Also, do some minor cleanup.
For #14786
Change-Id: Id92020b13fd21777dfb5b29c2722c3b2eb27001b
Reviewed-on: https://go-review.googlesource.com/20641
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Split the auxFloat type into 32/64 bit versions and perform checking for
exactly representable float32 values. Perform const folding on
float32/64. Comment out some const negation rules that the frontend
already performs.
Change-Id: Ib3f8d59fa8b30e50fe0267786cfb3c50a06169d2
Reviewed-on: https://go-review.googlesource.com/20568
Run-TryBot: Todd Neal <todd@tneal.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
* Refacts a bit saving and restoring parents restrictions
* Shaves ~100k from pkg/tools/linux_amd64,
but most of the savings come from the rewrite rules.
* Improves on the following artificial test case:
func f1(a4 bool, a6 bool) bool {
return a6 || (a6 || (a6 || a4)) || (a6 || (a4 || a6 || (false || a6)))
}
Change-Id: I714000f75a37a3a6617c6e6834c75bd23674215f
Reviewed-on: https://go-review.googlesource.com/20306
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Move functions testSchedLocalQueueLocal and testSchedLocalQueueSteal
from proc.go to export_test.go, the only site that they are used.
Fixes#14796
Change-Id: I16b6fa4a13835eab33f66a2c2e87a5f5c79b7bd3
Reviewed-on: https://go-review.googlesource.com/20640
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Ensures that after request.ParseMultipartForm has been invoked,
Request.PostForm and Request.Form are both populated with the
same formValues read in, instead of only populating Request.Form.
Fixes#9305
Change-Id: I3d4a11b006fc7dffaa35360014fe15b8c74d00a3
Reviewed-on: https://go-review.googlesource.com/19986
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reuse auto symbols so cse can eliminate OpAddrs that refer to
them.
Change-Id: I69e6a3f77a3a33946459cf8c6eccf223f6125048
Reviewed-on: https://go-review.googlesource.com/20569
Run-TryBot: Todd Neal <todd@tneal.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Every go executable has COFF symbol table appended at the end. The table is
used by nm and addr2line and contains all symbols present in the executable.
The table is quite large. For example, my go.exe has 11736 records.
To generate symbol table:
1) we walk "all symbols" list to count symbols we want for the table;
2) we allocate large global array of COFFSym structs (32 bytes each)
to fit our symbols;
3) we walk "all symbols" list again to fill our array with contents;
4) we iterate over our global array to write all records to the file.
This CL changes all these steps with single step:
- walk "all symbols" list and write each COFF symbol table record to
the file as we go.
I hope new version is faster and uses less garbage, but I don't know
how to benchmark this.
Change-Id: Ie4870583250131ea4428e0e83a0696c9df1794e0
Reviewed-on: https://go-review.googlesource.com/20580
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
We use *24 a lot for pointer arithmetic when accessing slices
of slices ([][]T). Rewrite to use an LEA and a shift.
The shift will likely be free, as it often gets folded into
an indexed load/store.
Update #14606
Change-Id: Ie0bf6dc1093876efd57e88ce5f62c26a9bf21cec
Reviewed-on: https://go-review.googlesource.com/20567
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Todd Neal <todd@tneal.org>
The structpkg global variable was only used to verify internal
consistency when declaring methods during import. Track the
value in the parser and binary importer directly and pass it
to the relevant function as an argument.
Change-Id: I7e5e006f9046d84f9a3959616f073798fda36c97
Reviewed-on: https://go-review.googlesource.com/20606
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The outCount value includes a flag bit for dotdotdot.
If we have this count incorrect, then the offset for the
methodset *rtype are in the wrong place.
Fixes#14783
Change-Id: If5acb16af08d4ffe36c8c9ee389c32f2712ce757
Reviewed-on: https://go-review.googlesource.com/20566
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, if a client of crypto/tls (e.g., net/http, http2) calls
tls.Conn.Write with a 33KB buffer, that ends up writing three TLS
records: 16KB, 16KB, and 1KB. Slow clients (such as 2G phones) must
download the first 16KB record before they can decrypt the first byte.
To improve latency, it's better to send smaller TLS records. However,
sending smaller records adds overhead (more overhead bytes and more
crypto calls), which slightly hurts throughput.
A simple heuristic, implemented in this change, is to send small
records for new connections, then boost to large records after the
first 1MB has been written on the connection.
Fixes#14376
Change-Id: Ice0f6279325be6775aa55351809f88e07dd700cd
Reviewed-on: https://go-review.googlesource.com/19591
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Tom Bergan <tombergan@google.com>
Reviewed-by: Adam Langley <agl@golang.org>
Only copy the ones that actually change. Also combine deep and substAny
functions into one. The Type.Copyany field is now unused, so remove it.
Passes toolstash -cmp.
Change-Id: Id28a9bf144ecf3e522aad00496f8a21ae2b74680
Reviewed-on: https://go-review.googlesource.com/20600
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
This change improves the error message when encountering a TLS handshake
message that is larger than our limit (64KB). Previously the error was
just “local error: internal error”.
Updates #13401.
Change-Id: I86127112045ae33e51079e3bc047dd7386ddc71a
Reviewed-on: https://go-review.googlesource.com/20547
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Move lexinit, typeinit, lexinit1, and lexfini into new universe.go
file, and give them a more idiomatic and descriptive API. No code
changes.
Change-Id: I0e9b25dcc86ad10f4b990dc02bd33477b488cc85
Reviewed-on: https://go-review.googlesource.com/20604
Reviewed-by: Robert Griesemer <gri@golang.org>
Missed these two declarations in the previous cleanup.
Change-Id: I54ff3accd387dd90e12847daccf4477169797f81
Reviewed-on: https://go-review.googlesource.com/20603
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This is really moving all the non-lexer pieces out of lex.go
into main.go. It's always been confusing that the top-most
compiler entry point (Main) is in the same file with the
lexer. Both files remain of substantial size (> 1000 lines),
which justifies this even more.
No other changes.
Change-Id: I03895589d5e3cc2340580350bbc1420539893dfc
Reviewed-on: https://go-review.googlesource.com/20601
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Removes an intermediate layer of functions that was clogging up a
corner of the compiler's profile graph.
I can't measure a performance improvement running a large build
like jujud, but the profile reports less total time spent in
gc.(*lexer).getr.
Change-Id: I3000585cfcb0f9729d3a3859e9023690a6528591
Reviewed-on: https://go-review.googlesource.com/20565
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In addition to reflect.Value.Call, exported methods can be invoked
by the Func value in the reflect.Method struct. This CL has the
compiler track what functions get access to a legitimate reflect.Method
struct by looking for interface calls to either of:
Method(int) reflect.Method
MethodByName(string) (reflect.Method, bool)
This is a little overly conservative. If a user implements a type
with one of these methods without using the underlying calls on
reflect.Type, the linker will assume the worst and include all
exported methods. But it's cheap.
No change to any of the binary sizes reported in cl/20483.
For #14740
Change-Id: Ie17786395d0453ce0384d8b240ecb043b7726137
Reviewed-on: https://go-review.googlesource.com/20489
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Might as well sort them while they're still in a slice.
Change-Id: I40c25ddc5c054dcb4da2aeefa79947967609d599
Reviewed-on: https://go-review.googlesource.com/20591
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This will test if deflate output is deterministic between two runs
of the deflater, when write sizes differ.
The deflater makes no official promises that results are
deterministic between runs, but this is a good test to determine
unintentional randomness.
Note that this does not guarantee that results are deterministic
across platforms nor that results will be deterministic between
Go versions. This is also not guarantees we should imply.
Change-Id: Id7dd89fe276060fd83a43d0b34ac35d50fcd32d9
Reviewed-on: https://go-review.googlesource.com/20573
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
p can be nil in Dconv so we need to do a check before dereferencing
it. Fixes a problem I was having running toolstash.
Change-Id: I34d6d278b319583d8454c2342ac88e054fc4b641
Reviewed-on: https://go-review.googlesource.com/20595
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
I don't know what they're used for, but that's the only file they're
referenced in.
Change-Id: Ie39d7d4621e2d5224408243b5789597ca0dc14be
Reviewed-on: https://go-review.googlesource.com/20593
Reviewed-by: Dave Cheney <dave@cheney.net>
This code is an eye sore to keep scrolling past in subr.go, so move it
out of the way.
Change-Id: I8eafc1725d868a4924ee7ca9b7738cce309f9eff
Reviewed-on: https://go-review.googlesource.com/20592
Reviewed-by: Dave Cheney <dave@cheney.net>
Still fails about 20% of the time on my laptop.
Fixes#14766.
Change-Id: I169ab728c6022dceeb91188f5ad466ed6413c062
Reviewed-on: https://go-review.googlesource.com/20590
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Use idiomatic slicing operations instead of incrementally building a
linked list.
Passes toolstash -cmp.
Change-Id: Idb0e40c7b4d7d1110d23828afa8ae1d157ba905f
Reviewed-on: https://go-review.googlesource.com/20556
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In particular, make Alignof work more like Sizeof. Other idiomatic
cleanups while here.
Passes toolstash -cmp.
Change-Id: I4def20894f3d95e49ab6a50ddba189be36fdd258
Reviewed-on: https://go-review.googlesource.com/20555
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This could be done by threading the Iter value down through memrun and
ispaddedfield, but that ends up a bit clunky. This way is also closer
to how we'll want the code to look once fields are kept in slices.
Passes toolstash -cmp.
Change-Id: I8a44445c85f921eb18d97199df2026c5ce0f4f67
Reviewed-on: https://go-review.googlesource.com/20558
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
x86 has a lot of instructions that require the output to be in the same
register as one of the inputs. When allocating the output register,
allocate the same register as the input if it is available.
Improves the performance of golang.org/x/crypto/sha3 by
10% (from 6% slower than 1.6 to 4% faster).
Fixes#14745
Change-Id: I4d81785240c9368e4dc75107b45c959d200df8e6
Reviewed-on: https://go-review.googlesource.com/20488
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Not calling popdcl doesn't have an impact on generated code but
the result is a growing (rather than empty) stack of symbols,
possibly causing more data to remain alive than necessary.
Also: minor cleanups.
Change-Id: Ic4fdbcd8843637d69ab1aa15e896a7e6339bc990
Reviewed-on: https://go-review.googlesource.com/20554
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Robert Griesemer <gri@golang.org>
Use a map to detect duplicate symbols. Allows eliminating an otherwise
unneeded field from Sym and gets rid of a global variable.
Change-Id: Ic004bca7e9130a1261a1cddbc17244529a2a1df4
Reviewed-on: https://go-review.googlesource.com/20552
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Change the existing flags from compile time consts to be configurable
from the command line.
Change-Id: I4aab4bf3dfcbdd8e2b5a2ff51af95c2543967769
Reviewed-on: https://go-review.googlesource.com/20560
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Todd Neal <todd@tneal.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The location of VARDEFs is incorrect for PPARAMOUT variables
which are also used as temporary locations. We put in VARDEFs
when setting the variable at return time, but when the location
is also used as a temporary the lifetime values are wrong.
Fix copyelim to update the names map properly. This is a
real name bug fix which, as a result, allows me to
write a reasonable test to trigger the PPARAMOUT bug.
This is kind of a band-aid fix for #14591. A more pricipled
fix (which allows values to be stored in the return variable
earlier than the return point) will be harder.
Fixes#14591
Change-Id: I7df8ae103a982d1f218ed704c080d7b83cdcfdd9
Reviewed-on: https://go-review.googlesource.com/20457
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
PKIX versions are off-by-one, so v1 is actually a zero on the wire, v2
is a one, and so on.
The RFC says that the version in a CRL is optional, but doesn't say what
the default is. Since v2 is the only accepted version, I had made the
default v2. However, OpenSSL considers the default to be v1. Also, if
the default is v2 and the element is optional then we'll never actually
write v2 on the wire. That's contrary to the RFC which clearly assumes
that v2 will be expressed on the wire in some cases.
Therefore, this change aligns with OpenSSL and assumes that v1 is the
default CRL version.
Fixes#13931
[1] https://tools.ietf.org/html/rfc5280#section-5.1
Change-Id: Ic0f638ebdd21981d92a99a882affebf3a77ab71a
Reviewed-on: https://go-review.googlesource.com/20544
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The default version of an X.509 certificate is v1, which is encoded on
the wire as a zero.
Fixes#13382.
Change-Id: I5fd725c3fc8b08fd978ab694a3e2d6d2a495918b
Reviewed-on: https://go-review.googlesource.com/20548
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Allows safely eliminating more direct uses of Type's Type and Down
fields.
Passes toolstash -cmp.
Change-Id: I5c17fe541a0473c3cd2978d8314c4ab759079a61
Reviewed-on: https://go-review.googlesource.com/20541
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
I would like to add a
func (t *Type) Elem() *Type
method to package gc, but that would collide with the existing
func (t *Type) Elem() ssa.Type
method needed to make *gc.Type implement ssa.Type. Because the latter
is much less widely used right now than the former will be, this CL
renames it to ElemType.
Longer term, hopefully gc and ssa will share a common Type interface,
and ElemType can go away.
Change-Id: I270008515dc4c01ef531cf715637a924659c4735
Reviewed-on: https://go-review.googlesource.com/20546
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Eliminate "else_clause" parameter and move error messages about bad if
statements into the if_stmt parsing method.
Passes toolstash -cmp.
Change-Id: Ibc31619bdb2e7e0cf28712b14640f7d9b6124a40
Reviewed-on: https://go-review.googlesource.com/20543
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Make sure we do any just-before-return cleanup on all paths out of a
function, including when recovering. Each exit path should include
deferreturn (if there are any defers) and then the exit
code (e.g. copying heap-escaping return values back to the stack).
Introduce a Defer SSA block type which has two outgoing edges - one the
fallthrough edge (the defer was queued successfully) and one which
immediately returns (the defer had a successful recover() call and
normal execution should resume at the return point).
Fixes#14725
Change-Id: Iad035c9fd25ef8b7a74dafbd7461cf04833d981f
Reviewed-on: https://go-review.googlesource.com/20486
Reviewed-by: David Chase <drchase@google.com>
This CL was mostly produced by a one-off automated rewrite tool
looking for statements like "for X := T.Type; X != nil; X = X.Down"
and a few minor variations.
Passes toolstash -cmp.
Change-Id: Ib22705e37d078ef97841ee2e08f60bdbcabb94ad
Reviewed-on: https://go-review.googlesource.com/20520
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
That was easy.
Fixes#14473.
Change-Id: I9d1d20a5c5a9b1423e6c72c0460ee4a78130864f
Reviewed-on: https://go-review.googlesource.com/20521
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If the upstream writer has returned an error, it may not
be returned by subsequent calls.
This makes sure that if an error has been returned, the
Writer will keep returning an error on all subsequent calls,
and not silently "swallow" them.
Change-Id: I2c9f614df72e1f4786705bf94e119b66c62abe5e
Reviewed-on: https://go-review.googlesource.com/20515
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
The fmt package does not use bytes.Buffer
anymore as an internal buffer.
Change-Id: I34c7a52506290ccbcb10ea2e85dea49a0a8b8203
Reviewed-on: https://go-review.googlesource.com/20511
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This allows TestDialerFallbackDelay to pass again on machines where IPv6
connections to nowhere fail quickly instead of hanging.
This bug appeared last month, when I deleted the slowTimeout constant.
Updates #11225Fixes#14731
Change-Id: I840011eee571aab1041022411541736111c7fad5
Reviewed-on: https://go-review.googlesource.com/20493
Run-TryBot: Paul Marks <pmarks@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
The existing implementation uses code written in Go to
implement Sqrt; this adds the assembler to use the sqrt
instruction for Power and makes the necessary changes to
allow it to be inlined.
The following tests showed this relative improvement:
benchmark delta
BenchmarkSqrt -97.91%
BenchmarkSqrtIndirect -96.65%
BenchmarkSqrtGo -35.93%
BenchmarkSqrtPrime -96.94%
Fixes#14349
Change-Id: I8074f4dc63486e756587564ceb320aca300bf5fa
Reviewed-on: https://go-review.googlesource.com/19515
Reviewed-by: Minux Ma <minux@golang.org>
When calling freeValue for possible const values, remove them from the
cache as well.
Change-Id: I087ed592243e33c58e5db41700ab266fc70196d9
Reviewed-on: https://go-review.googlesource.com/20481
Run-TryBot: Todd Neal <tolchz@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
More cleanups after CL 20089
- copysub, take a bool rather than an int for the f (force) parameter.
- copysub returns a bool rather than an int.
- prevl, reg is now int16, which reduces type conversion in its callers.
- copy1, reduce the scope of t and p variables.
- small simplifications in copyau1, copyas, etc.
- {mips64,ppc64}/regzer returns a bool.
- apply CL 20181 to x86/peep.go which was missed in the last CL.
- various comment fixes.
Change-Id: Ib73ffb768c979ce86f1614e5366fd576dea50986
Reviewed-on: https://go-review.googlesource.com/20281
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Change-Id: Ice3aa807169f4fec85745a3991b1084a9f85c1b5
Reviewed-on: https://go-review.googlesource.com/20499
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Accessing the n'th field of a struct is fairly common, and in
particular accessing the 0'th field of the receiver parameter list is
very common. Add helper methods for both of these tasks and update
code to make use of them.
Change-Id: I81f551fecdca306b3800636caebcd0dc106f2ed7
Reviewed-on: https://go-review.googlesource.com/20498
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Dave Cheney <dave@cheney.net>
Also, more lazy variable declarations, and make Dijkstra happy by
replacing "goto loop" with a for loop.
Change-Id: Idf2cd779a92eb3f33bd3394e12c9a0be72002ff4
Reviewed-on: https://go-review.googlesource.com/20496
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Follow up to CL 20494 addressing Type.Copy and a few other tiny
cleanups.
Change-Id: I3d0913a9f50a22ac2fd802858b1a94c15c5cb1bc
Reviewed-on: https://go-review.googlesource.com/20501
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Better documentation. Change parameter types from **Type and int to
just *Type and bool. Make use of short var declarations.
Change-Id: I909846ba0df65cd2bc05ee145b72d60e881588bd
Reviewed-on: https://go-review.googlesource.com/20495
Reviewed-by: Dave Cheney <dave@cheney.net>
This should is preparatory cleanup to make it easier to use separate
types to represent each kind of Go type, rather than a single omnibus
Type struct with heavily overloaded fields.
Also, add TODO comments marking assignments that change an existing
Type's kind, as they need to be removed before we can factor Type.
Change-Id: If4b551fdea4ae045b10b1a3de2ee98f5cf32a517
Reviewed-on: https://go-review.googlesource.com/20494
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
With this, the start and end of geneq and genhash
are parallel. This removes a few rare nilchecks
from generated hash functions, but nothing
to write home about.
Change-Id: I3b4836111d04daa6f6834a579bbec374a3f42c70
Reviewed-on: https://go-review.googlesource.com/20456
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Mix in several other minor cleanups, including adding some new methods
to Nodes: Index, Addr, SetIndex, SetNodes.
Passes toolstash -cmp.
Update #14473.
Change-Id: I8bd4ae3fde7c5e20ba66e7dd1654fbc70c3ddeb8
Reviewed-on: https://go-review.googlesource.com/20491
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Today the linker keeps all methods of reachable types. This is
necessary if a program uses reflect.Value.Call. But while use of
reflection is widespread in Go for encoders and decoders, using
it to call a method is rare.
This CL looks for the use of reflect.Value.Call in a program, and
if it is absent, adopts a (reasonably conservative) method pruning
strategy as part of dead code elimination. Any method that is
directly called is kept, and any method that matches a used
interface's method signature is kept.
Whether or not a method body is kept is determined by the relocation
from its receiver's *rtype to its *rtype. A small change in the
compiler marks these relocations as R_METHOD so they can be easily
collected and manipulated by the linker.
As a bonus, this technique removes the text segment of methods that
have been inlined. Looking at the output of building cmd/objdump with
-ldflags=-v=2 shows that inlined methods like
runtime.(*traceAllocBlockPtr).ptr are removed from the program.
Relatively little work is necessary to do this. Linking two
examples, jujud and cmd/objdump show no more than +2% link time.
Binaries that do not use reflect.Call.Value drop 4 - 20% in size:
addr2line: -793KB (18%)
asm: -346KB (8%)
cgo: -490KB (10%)
compile: -564KB (4%)
dist: -736KB (17%)
fix: -404KB (12%)
link: -328KB (7%)
nm: -827KB (19%)
objdump: -712KB (16%)
pack: -327KB (14%)
yacc: -350KB (10%)
Binaries that do use reflect.Call.Value see a modest size decrease
of 2 - 6% thanks to pruning of unexported methods:
api: -151KB (3%)
cover: -222KB (4%)
doc: -106KB (2.5%)
pprof: -314KB (3%)
trace: -357KB (4%)
vet: -187KB (2.7%)
jujud: -4.4MB (5.8%)
cmd/go: -384KB (3.4%)
The trivial Hello example program goes from 2MB to 1.68MB:
package main
import "fmt"
func main() {
fmt.Println("Hello, 世界")
}
Method pruning also helps when building small binaries with
"-ldflags=-s -w". The above program goes from 1.43MB to 1.2MB.
Unfortunately the linker can only tell if reflect.Value.Call has been
statically linked, not if it is dynamically used. And while use is
rare, it is linked into a very common standard library package,
text/template. The result is programs like cmd/go, which don't use
reflect.Value.Call, see limited benefit from this CL. If binary size
is important enough it may be possible to address this in future work.
For #6853.
Change-Id: Iabe90e210e813b08c3f8fd605f841f0458973396
Reviewed-on: https://go-review.googlesource.com/20483
Reviewed-by: Russ Cox <rsc@golang.org>
Drops cmd/binary size from 14.41 MiB to 11.42 MiB.
Before:
text data bss dec hex filename
8121210 3521696 737960 12380866 bceac2 ../pkg/tool/linux_amd64/compile
bradfitz@dev-bradfitz-debian2:~/go/src$ ls -l ../pkg/tool/linux_amd64/compile
-rwxr-xr-x 1 bradfitz bradfitz 15111272 Mar 8 23:32 ../pkg/tool/linux_amd64/compile
a2afc0 51312 R html.statictmp_0085
6753f0 56592 T cmd/internal/obj/x86.doasm
625480 58080 T cmd/compile/internal/gc.typecheck1
f34c40 65688 D runtime.trace
be0a20 133552 D cmd/compile/internal/ppc64.varianttable
c013e0 265856 D cmd/compile/internal/arm.progtable
c42260 417280 D cmd/compile/internal/amd64.progtable
ca8060 417280 D cmd/compile/internal/x86.progtable
f44ce0 500640 D cmd/internal/obj/arm64.oprange
d0de60 534208 D cmd/compile/internal/ppc64.progtable
d90520 667520 D cmd/compile/internal/arm64.progtable
e334a0 790368 D cmd/compile/internal/mips64.progtable
a3e8c0 1579362 r runtime.pclntab
After:
text data bss dec hex filename
8128226 375954 246432 8750612 858614 ../pkg/tool/linux_amd64/compile
-rwxr-xr-x 1 bradfitz bradfitz 11971432 Mar 8 23:35 ../pkg/tool/linux_amd64/compile
6436d0 43936 T cmd/compile/internal/gc.walkexpr
c13ca0 45056 D cmd/compile/internal/ssa.opcodeTable
5d8ea0 50256 T cmd/compile/internal/gc.(*state).expr
818c50 50448 T cmd/compile/internal/ssa.rewriteValueAMD64_OpMove
a2d0e0 51312 R html.statictmp_0085
6753d0 56592 T cmd/internal/obj/x86.doasm
625460 58080 T cmd/compile/internal/gc.typecheck1
c38fe0 65688 D runtime.trace
a409e0 1578810 r runtime.pclntab
Fixes#14703
Change-Id: I2177596d5c7fd67db0a3c423cd90801cf52adb12
Reviewed-on: https://go-review.googlesource.com/20450
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Uses a switch statement for direct format function selection
similar to other types verb handling in fmt.
Applies padding also to nil pointers formatted with %v.
Guards against "slice bounds out of range" panic in TestSprintf
when a pointer test results in a formatted string s
that is shorter than the index i the pointer should appear in.
Adds more and rearranges tests.
Fixes#14712Fixes#14714
Change-Id: Iaf5ae37b7e6ba7d27d528d199f2b2eb9d5829b8c
Reviewed-on: https://go-review.googlesource.com/20371
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
On Plan 9, there's no "kill all threads" system call, so exit is done
by sending a "go: exit" note to each OS process. If concurrent GC
occurs during this loop, deadlock sometimes results. Prevent this by
incrementing m.locks before sending notes.
Change-Id: I31aa15134ff6e42d9a82f9f8a308620b3ad1b1b1
Reviewed-on: https://go-review.googlesource.com/20477
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This prevents a fatal "missing stackmap" error if garbage collection
occurs during exit.
Also annotate argument sizes for "go vet".
Change-Id: I2473e0ef6aef8f26d0bbeaee9bd8f8a52eaaf941
Reviewed-on: https://go-review.googlesource.com/20476
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
* Move lowering into a separate pass.
* SliceLen/SliceCap is now available to various intermediate passes
which use useful for bounds checking.
* Add a second opt pass to handle the new opportunities
Decreases the code size of binaries in pkg/tool/linux_amd64
by ~45K.
Updates #14564#14606
Change-Id: I5b2bd6202181c50623a3585fbf15c0d6db6d4685
Reviewed-on: https://go-review.googlesource.com/20172
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
It's only used once, so just make the caller responsible for iterating
both the receiver and input params.
Change-Id: Icb34f3f0cf96e80fbe27f3f49d12eddc26599b92
Reviewed-on: https://go-review.googlesource.com/20454
Reviewed-by: Dave Cheney <dave@cheney.net>
so the code is more readable.
Also use n[i] = val instead of n = append(n, val),
because this avoids a function call to append.
NOTE: compiles, but I had trouble running toolstash -cmp and need sleep
now.
@Ian this might save you some grunt work :-)
Change-Id: I2a4c70396c58905f7d5aabf83f3020f11dea0e89
Reviewed-on: https://go-review.googlesource.com/20430
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Adds a type of output to Examples that allows tests to have unordered
output. This is intended to help clarify when the output of a command
will produce a fixed return, but that return might not be in an constant
order.
Examples where this is useful would be documenting the rand.Perm()
call, or perhaps the (os.File).Readdir(), both of which can not guarantee
order, but can guarantee the elements of the output.
Fixes#10149
Change-Id: Iaf0cf1580b686afebd79718ed67ea744f5ed9fc5
Reviewed-on: https://go-review.googlesource.com/19280
Reviewed-by: Andrew Gerrand <adg@golang.org>
Suggested by Dave Cheney in golang.org/cl/20405.
Change-Id: I581c11ae80034cb6ebef3de976e8ae9484472322
Reviewed-on: https://go-review.googlesource.com/20453
Reviewed-by: Dave Cheney <dave@cheney.net>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL was automatically generated using a special-purpose AST
rewriting tool, followed by manual editing to put some comments back in
the right places and fix some bad line breaks.
The result is not perfect but it's a big step toward getting back to
sanity, and because it was automatically generated there is a decent
chance that it is correct.
Passes toolstash -cmp.
Update #14473.
Change-Id: I01c09078a6d78e2b008bc304d744b79469a38d3d
Reviewed-on: https://go-review.googlesource.com/20440
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
More idiomatic naming (in particular, matches the naming used for
go/types.Signature).
Also, convert more code to use these methods and/or IterFields.
(Still more to go; only made a quick pass for low hanging fruit.)
Passes toolstash -cmp.
Change-Id: I61831bfb1ec2cd50d4c7efc6062bca4e0dcf267b
Reviewed-on: https://go-review.googlesource.com/20451
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Alternative to golang.org/cl/19852. This memory layout doesn't have
an easy type representation, but it is noticeably smaller than the
current funcType, and saves significant extra space.
Some notes on the layout are in reflect/type.go:
// A *rtype for each in and out parameter is stored in an array that
// directly follows the funcType (and possibly its uncommonType). So
// a function type with one method, one input, and one output is:
//
// struct {
// funcType
// uncommonType
// [2]*rtype // [0] is in, [1] is out
// uncommonTypeSliceContents
// }
There are three arbitrary limits introduced by this CL:
1. No more than 65535 function input parameters.
2. No more than 32767 function output parameters.
3. reflect.FuncOf is limited to 128 parameters.
I don't think these are limits in practice, but are worth noting.
Reduces godoc binary size by 2.4%, 330KB.
For #6853.
Change-Id: I225c0a0516ebdbe92d41dfdf43f716da42dfe347
Reviewed-on: https://go-review.googlesource.com/19916
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Instead of a pointer on every rtype, use a bit flag to indicate that
the contents of uncommonType directly follows the rtype value when it
is needed.
This requires a bit of juggling in the compiler's rtype encoder. The
backing arrays for fields in the rtype are presently encoded directly
after the slice header. This packing requires separating the encoding
of the uncommonType slice headers from their backing arrays.
Reduces binary size of godoc by ~180KB (1.5%).
No measurable change in all.bash time.
For #6853.
Change-Id: I60205948ceb5c0abba76fdf619652da9c465a597
Reviewed-on: https://go-review.googlesource.com/19790
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Converting an and-K into a pair of shifts for K that will
fit in a one-byte argument is probably not an optimization,
and it also interferes with other patterns that we want to
see fire, like (<< (AND K)) [for small K] and bounds check
elimination for masked indices.
Turns out that on Intel, even 32-bit signed immediates beat
the shift pair; the size reduction of tool binaries is 0.09%
vs 0.07% for only the 8-bit immediates.
RLH found this one working on the new/next GC.
Change-Id: I2414a8de1dd58d680d18587577fbadb7ff4f67d9
Reviewed-on: https://go-review.googlesource.com/20410
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David Chase <drchase@google.com>
Some cleaned up documentation, but no code changes.
Change-Id: I145398bb6d118c626ab3873ef75dbb64ebc286e9
Reviewed-on: https://go-review.googlesource.com/20404
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Don't do a substring search to test for a timeout error.
Fixes#14722 (maybe)
Change-Id: I4e18c749d6fd92c084a1b0b83a805119e1ae5ff2
Reviewed-on: https://go-review.googlesource.com/20403
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
* Simplify the nilcheck generated by
for _, e := range a {}
* No effect on the generated code because these nil checks
don't end up in the generated code.
* Useful for other analysis, e.g. it'll remove one dependecy
on the induction variable.
Change-Id: I6ee66ddfdc010ae22aea8dca48163303d93de7a9
Reviewed-on: https://go-review.googlesource.com/20307
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Make more idiomatic with a defer cleanup, which allows declaring
variables closer to their first use, rather than up front before the
first goto statement.
Also, split the legacy code generation code path into a separate
genlegacy function, analogous to the new genssa.
Passes toolstash -cmp.
Change-Id: I86c22838704f6861b75716ae64ba103b0e73b12f
Reviewed-on: https://go-review.googlesource.com/20353
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
getgrouplist is non-standard and has slightly different semantics on
each platform. Darwin defines the function in terms of ints instead of
gid_ts. Solaris only recently supported the call, so stubbing out for
now.
Fixes#14696Fixes#14709
Change-Id: I5a44538d41594909efb6f3f9610c55d638c36757
Reviewed-on: https://go-review.googlesource.com/20348
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Accidentally added in https://golang.org/cl/20242.
This is in preparation for transformation by an automated tool.
Passes toolstash -cmp.
Update #14473.
Change-Id: I28c637d220df3ccaa8e368bfbea7282a6e66662e
Reviewed-on: https://go-review.googlesource.com/20402
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Before, those C files might have been intended for the Plan 9 C compiler,
but that option was removed in Go 1.5. We can simplify the maintenance
of cgo packages now if we assume C files (and C++ and M and SWIG files)
should only be considered when cgo is enabled.
Also remove newly unnecessary build tags in runtime/cgo's C files.
Fixes#14123
Change-Id: Ia5a7fe62b9469965aa7c3547fe43c6c9292b8205
Reviewed-on: https://go-review.googlesource.com/19613
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Bug accidentally inserted in https://golang.org/cl/20210. Doesn't seem
to make a difference, but restore original code anyhow.
Update #14473.
Change-Id: I9cf87987ff158e27c7231027819317cdde8c132c
Reviewed-on: https://go-review.googlesource.com/20401
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Trailers() returns the headers that were set by the handler after the
headers were written "to the wire" (in this case HeaderMap) and that
were also specified in a proper header called "Trailer".
Neither HeaderMap or trailerMap (used for Trailers()) are manipulated by
the handler code, instead a third stagingMap is given to the
handler. This avoid a reference kept by handler to affect the recorded
results.
If a handler just modify the header but doesn't call any Write or Flush
method from ResponseWriter (or Flusher) interface, HeaderMap will not be
updated. In this case, calling Flush in the recorder is enough to get
the HeaderMap filled.
Fixes#14531.
Fixes#8857.
Change-Id: I42842341ec3e95c7b87d7e6f178c65cd03d63cc3
Reviewed-on: https://go-review.googlesource.com/20047
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Deleting the string merging pass makes the linker 30-35% faster
but makes jujud (using the github.com/davecheney/benchjuju snapshot) 2.5% larger.
Two optimizations bring the space overhead down to 0.6%.
First, change the default alignment for string data to 1 byte.
(It was previously defaulting to larger amounts, usually pointer width.)
Second, write out the type string for T (usually a bigger expression) as "*T"[1:],
so that the type strings for T and *T share storage.
Combined, these obtain the bulk of the benefit of string merging
at essentially no cost. The remaining benefit from string merging
is not worth the excessive cost, so delete it.
As penance for making the jujud binary 0.6% larger,
the next CL in this sequence trims the reflect functype
information enough to make the jujud binary overall 0.75% smaller
(that is, that CL has a net -1.35% effect).
For #6853.
Fixes#14648.
Change-Id: I3fdd74c85410930c36bb66160ca4174ed540fc6e
Reviewed-on: https://go-review.googlesource.com/20334
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
cmd/link is clearly the way forward.
The original rationale for cmd/newlink was that it would be a clean Go reimplementation.
But when push came to shove, cmd/link got converted from C instead,
and all the work on build modes and the like is in cmd/link now.
Cleaning up cmd/link is likely a much better plan.
This directory is something to delete from releases and the
testdata is something that breaks every time the .6 format changes.
Fix both problems by just deleting it outright.
Change-Id: Ib00fecda258ba685f1752725971182af9d4459eb
Reviewed-on: https://go-review.googlesource.com/20380
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Also, add more failure output to debug why linux/mips64le and
linux/ppc64 are failing. They should be working. I suspect their
builder test envs are missing something.
Change-Id: I97273fe72c4e3009db400394636d0da1ef147485
Reviewed-on: https://go-review.googlesource.com/20358
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This adds "slicing by 8" optimization to Castagnoli tables which will
speed up CRC32 calculation on systems without asssembler,
which are all but AMD64.
In my tests, it is faster to use "slicing by 8" for sizes all down to
16 bytes, so the switchover point has been adjusted.
There are no benchmarks for small sizes, so I have added one for 40 bytes,
as well as one for bigger sizes (32KB).
Castagnoli, No assembler, 40 Byte payload: (before, after)
BenchmarkCastagnoli40B-4 10000000 161 ns/op 246.94 MB/s
BenchmarkCastagnoli40B-4 20000000 100 ns/op 398.01 MB/s
Castagnoli, No assembler, 32KB payload: (before, after)
BenchmarkCastagnoli32KB-4 10000 115426 ns/op 283.89 MB/s
BenchmarkCastagnoli32KB-4 30000 45171 ns/op 725.41 MB/s
IEEE, No assembler, 1KB payload: (before, after)
BenchmarkCrc1KB-4 500000 3604 ns/op 284.10 MB/s
BenchmarkCrc1KB-4 1000000 1463 ns/op 699.79 MB/s
Compared:
benchmark old ns/op new ns/op delta
BenchmarkCastagnoli40B-4 161 100 -37.89%
BenchmarkCastagnoli32KB-4 115426 45171 -60.87%
BenchmarkCrc1KB-4 3604 1463 -59.41%
benchmark old MB/s new MB/s speedup
BenchmarkCastagnoli40B-4 246.94 398.01 1.61x
BenchmarkCastagnoli32KB-4 283.89 725.41 2.56x
BenchmarkCrc1KB-4 284.10 699.79 2.46x
Change-Id: I303e4ec84e8d4dafd057d64c0e43deb2b498e968
Reviewed-on: https://go-review.googlesource.com/19335
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Without SSA:
$ go build -a -gcflags='-S -ssa=0' runtime 2>&1 | grep 'TEXT.*""\.init(SB)'
0x0000 00000 ($GOROOT/src/runtime/write_err.go:14) TEXT "".init(SB), $88-0
With SSA, before this CL:
$ go build -a -gcflags='-S -ssa=1' runtime 2>&1 | grep 'TEXT.*""\.init(SB)'
0x0000 00000 ($GOROOT/src/runtime/traceback.go:608) TEXT "".init(SB), $152-0
With SSA, after this CL:
$ go build -a -gcflags='-S -ssa=1' runtime 2>&1 | grep 'TEXT.*""\.init(SB)'
0x0000 00000 ($GOROOT/src/runtime/write_err.go:14) TEXT "".init(SB), $152-0
Change-Id: Ida3541e03a1af6ffc753ee5c3abeb653459edbf6
Reviewed-on: https://go-review.googlesource.com/20321
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The existing implementation deals with absolute relocations in __TEXT
for darwin/amd64 in build-mode c-shared, but it ignores c-archive.
This results in issues when trying to use a c-archive in an iOS
app on the 64-bit simulator. This patch adds c-archive to the
handling of this issue.
Fixes#14217
Change-Id: I2e4d5193caa531171ad22fd0cd420a8bfb4646a6
Reviewed-on: https://go-review.googlesource.com/19206
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This adds a heap-based proper priority queue to the
scheduler which made a relatively easy to test quite a few
heuristics that "ought to work well". For go tools
themselves (which may not be representative) the heuristic
that works best is (1) in line-number-order, then (2) from
more to fewer args, then (3) in variable ID order. Trying
to improve this with information about use at end of
blocks turned out to be fruitless -- all of my naive
attempts at using that information turned out worse than
ignoring it. I can confirm that the stores-early heuristic
tends to help; removing it makes the results slightly worse.
My metric is code size reduction, which I take to mean fewer
spills from register allocation. It's not uniform.
Here's the endpoints for "vet" from one set of pretty-good
heuristics (this is representative at least).
-2208 time.parse 13472 15680 -14.081633%
-1514 runtime.pclntab 1002058 1003572 -0.150861%
-352 time.Time.AppendFormat 9952 10304 -3.416149%
-112 runtime.runGCProg 1984 2096 -5.343511%
-64 regexp/syntax.(*parser).factor 7264 7328 -0.873362%
-44 go.string.alldata 238630 238674 -0.018435%
48 math/big.(*Float).round 1376 1328 3.614458%
48 text/tabwriter.(*Writer).writeLines 1232 1184 4.054054%
48 math/big.shr 832 784 6.122449%
88 go.func.* 75174 75086 0.117199%
96 time.Date 1968 1872 5.128205%
Overall there appears to be an 0.1% decrease in text size.
No timings yet, and given the distribution of size reductions
it might make sense to wait on those.
addr2line text (code) = -4392 bytes (-0.156273%)
api text (code) = -5502 bytes (-0.147644%)
asm text (code) = -5254 bytes (-0.187810%)
cgo text (code) = -4886 bytes (-0.148846%)
compile text (code) = -1577 bytes (-0.019346%) * changed
cover text (code) = -5236 bytes (-0.137992%)
dist text (code) = -5015 bytes (-0.167829%)
doc text (code) = -5180 bytes (-0.182121%)
fix text (code) = -5000 bytes (-0.215148%)
link text (code) = -5092 bytes (-0.152712%)
newlink text (code) = -5204 bytes (-0.196986%)
nm text (code) = -4398 bytes (-0.156018%)
objdump text (code) = -4582 bytes (-0.155046%)
pack text (code) = -4503 bytes (-0.294287%)
pprof text (code) = -6314 bytes (-0.085177%)
trace text (code) = -5856 bytes (-0.097818%)
vet text (code) = -5696 bytes (-0.117334%)
yacc text (code) = -4971 bytes (-0.213817%)
This leaves me sorely tempted to look into a "real" scheduler
to try to do a better job, but I think it might make more
sense to look into getting loop information into the
register allocator instead.
Fixes#14577.
Change-Id: I5238b83284ce76dea1eb94084a8cd47277db6827
Reviewed-on: https://go-review.googlesource.com/20240
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
When the pointer offset is non-zero in the small loads, we need to add the offset
when converting to the larger load.
Fixes#14694
Change-Id: I5ba8bcb3b9ce26c7fae0c4951500b9ef0fed54cd
Reviewed-on: https://go-review.googlesource.com/20333
Reviewed-by: Keith Randall <khr@golang.org>
Currently, package obj reserves a range of 1<<12 opcodes for each
target architecture. E.g., mips64 has [6<<12, 7<<12).
However, because mips.ABEQ and mips.ALAST are both within that range,
the expression mips.ABEQ+mips.ALAST in turn falls (far) outside that
range around 12<<12, meaning it could theoretically collide with
another arch's opcodes.
More practically, it's a problem because 12<<12 overflows an int16,
which hampers fixing #14692. (We could also just switch to uint16 to
avoid the overflow, but that still leaves the first problem.)
As a workaround, use Michael Hudson-Doyle's solution from
https://golang.org/cl/20182 and use negative values for these variant
instructions.
Passes toolstash -cmp for GOARCH=arm and GOARCH=mips64.
Updates #14692.
Change-Id: Iad797d10652360109fa4db19d4d1edb6529fc2c0
Reviewed-on: https://go-review.googlesource.com/20345
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is needed now for subrepos to be able to conditionally use
API symbols found only after Go 1.6.
Change-Id: Ie7d9301332aa1739b585d93f8025424ae72a2430
Reviewed-on: https://go-review.googlesource.com/20344
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
TimeoutHandler was starting the Timer when the handler was created,
instead of when serving a request. It also was sharing it between
multiple requests, which is incorrect, as the requests might start
at different times.
Store the timeout duration and create the Timer when ServeHTTP is
called. Different requests will have different timers.
The testing plumbing was simplified to store the channel used to
control when timeout happens. It overrides the regular timer.
Fixes#14568.
Change-Id: I4bd51a83f412396f208682d3ae5e382db5f8dc81
Reviewed-on: https://go-review.googlesource.com/20046
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Compile time is about the same. Getting rid of the nodeSeq interfaces,
particularly nodeSeqIterate, should produce some improvements.
Passes toolstash -cmp.
Update #14473.
Change-Id: I678abafdd9129c6cccb0ec980511932eaed496a0
Reviewed-on: https://go-review.googlesource.com/20343
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
It is only necessary in a few places, and this inlining will
simplify the transition away from NodeLists.
Passes toolstash -cmp.
Change-Id: I4ee9b4bf56ffa04df23e20a0a83b302d36b33510
Reviewed-on: https://go-review.googlesource.com/20290
Reviewed-by: Ian Lance Taylor <iant@golang.org>
-test flag is a testing only flag that enables all vet checks. It was needed
because there was no way to run all vet checks in a single command
invocation. However it is possible to do this now by combining -all and -shadow
flags.
Also a recently added -tests flag is similarly named, having both -test and
-tests can be confusing.
Change-Id: Ie5bacbe0bef5c8409eeace46f16141fa4e782c32
Reviewed-on: https://go-review.googlesource.com/20006
Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Opt for replacements that avoid any assumptions
about the representations in use.
Passes toolstash -cmp.
Change-Id: Ia858a33abcae344e03fc1862fc9b0e192fde80c1
Reviewed-on: https://go-review.googlesource.com/20279
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fix some test output while we're here.
Change-Id: I265cedc222e078eff120f268b92451e12b0400b2
Reviewed-on: https://go-review.googlesource.com/20294
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Fixes#14693
Change-Id: Id0a6a80b4c37c0b0f1c2755667b7233ed8964e40
Reviewed-on: https://go-review.googlesource.com/20342
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently work.finalizersDone is reset only at the beginning of
gcStart. As a result, it will be set when checkmark runs, so checkmark
will skip scanning finalizers. Hence, if there are any bugs that cause
the regular scan of finalizers to miss pointers, checkmark will also
miss them and fail to detect the missed pointer.
Fix this by resetting finalizersDone in gcResetMarkState. This way it
gets reset before any full mark, which is exactly what we want.
Change-Id: I4ddb5eba5b3b97e52aaf3e08fd9aa692bda32b20
Reviewed-on: https://go-review.googlesource.com/20332
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Rick Hudson <rlh@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In increment and decrement statements, explicit check that the type
of operand is numeric. This avoids a related but less clear error
about converting "1" to be emitted.
So, when checking
package main
func main() {
var x bool
x++
}
instead of emitting the error
prog.go:5:2: cannot convert 1 (untyped int constant) to bool
emits
prog.go:5:2: invalid operation: x++ (non-numeric type bool).
Updates #12525.
Change-Id: I00aa6bd0bb23267a2fe10ea3f5a0b20bbf3552bc
Reviewed-on: https://go-review.googlesource.com/20244
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Move initproginfo and initvariants to ppc64.Main to avoid checking that
the tables are initialised every time.
Change-Id: I95ff4146a7abc18c42a20bfad716cc80ea8367e5
Reviewed-on: https://go-review.googlesource.com/20286
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Fixes#14626
Change-Id: I91c40407dc35355e5c5046f24111a126f99260d9
Reviewed-on: https://go-review.googlesource.com/20192
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
As part of local testing with a large group member list, I discovered
that the lookup functions don't resize their buffer if they receive
ERANGE. I fixed this as a side-effect of this CL.
Thanks to @andrenth for the original CL.
Fixes#2617
Change-Id: Ie6aae2fe0a89eae5cce85786869a8acaa665ffe9
Reviewed-on: https://go-review.googlesource.com/19235
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The io.Reader contract makes no promises about how a Reader should
behave after it returns its first error. Usually the errors are
sticky, but they don't have to be. A regression in zlib.Reader (bug
accidentally relied on sticky errors.
Minimal fix: wrap the user's provided Reader in a Reader which
guarantees stickiness. The minimal fix is less scary than touching
the multipart state machine.
Fixes#14676
Change-Id: I8dd8814b13ae5530824ae0e68529f788974264a5
Reviewed-on: https://go-review.googlesource.com/20297
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Ensure that all errors (including io.EOF) are persistent across method
calls on zlib.Reader. Furthermore, ensure that these persistent errors
are properly cleared when Reset is called.
Fixes#14675
Change-Id: I15a20c7e25dc38219e7e0ff255d1ba775a86bb47
Reviewed-on: https://go-review.googlesource.com/20292
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Found by temporarily flipping fields from *NodeList to Nodes and fixing
all the compilation errors. This CL does not actually change any
fields.
Passes toolstash -cmp.
Update #14473.
Change-Id: Ib98fa37e8752f96358224c973a743618a6a0e736
Reviewed-on: https://go-review.googlesource.com/20320
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Eliminates type conversions in a bunch of Oconv(int(n.Op), ...) calls.
Notably, this identified a misuse of Oconv in amd64/gsubr.go to try to
print an assembly instruction op instead of a compiler node op.
Change-Id: I93b5aa49fe14a5eaf868b05426d3b8cd8ab52bc5
Reviewed-on: https://go-review.googlesource.com/20298
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Implementation more or less follows plan9_386 version.
Revised 7 March to correct a bug in runtime.seek and
tidy whitespace for 8-column tabs.
Change-Id: I2e921558b5816502e8aafe330530c5a48a6c7537
Reviewed-on: https://go-review.googlesource.com/18966
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Plan 9 trap/signal handling differs on ARM from other architectures
because ARM has a link register. Also trap message syntax varies
between different architectures (historical accident?).
Revised 7 March to clarify a comment.
Change-Id: Ib6485f82857a2f9a0d6b2c375cf0aaa230b83656
Reviewed-on: https://go-review.googlesource.com/18969
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
In increment and decrement statements, explicit check that the type
of operand is numeric earlier. This avoids a related but less clear
error about converting "1" to be emitted.
So, when compiling
package main
func main() {
var x bool
x++
}
instead of emitting two errors
prog.go:5: cannot convert 1 to type bool
prog.go:5: invalid operation: x++ (non-numeric type bool)
just emits the second error.
Fixes#12525.
Change-Id: I6e81330703765bef0d6eb6c57098c1336af7c799
Reviewed-on: https://go-review.googlesource.com/20245
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This increases the number of matches in make.bash
from 853 to 984.
Change-Id: I12697697a50ecd86d49698200144a4c80dd3e5a4
Reviewed-on: https://go-review.googlesource.com/20274
Reviewed-by: Todd Neal <todd@tneal.org>
We used to start background mark workers and assists at different
times, so we needed to keep track of these separately. They're now set
to exactly the same time, so clean things up by merging them in to one
value, markStartTime.
Change-Id: I17c9843c3ed2d6f07b4c8cd0b2c438fc6de23b53
Reviewed-on: https://go-review.googlesource.com/20143
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
OffPtr allocates less and is easier to optimize.
With this change, the OffPtr collapsing opt
rule matches increase from 160k to 263k,
and the Load-after-Store opt rule matches
increase from 217 to 853.
Change-Id: I763426a3196900f22a367f7f6d8e8047b279653d
Reviewed-on: https://go-review.googlesource.com/20273
Run-TryBot: Todd Neal <todd@tneal.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Todd Neal <todd@tneal.org>
Reviewed-by: Keith Randall <khr@golang.org>
This triggers an astonishing 160k times
during make.bash. The second biggest
generic rewrite triggers 100k times.
However, this is really just moving
rewrites that were happening at the
architecture level to the generic level.
Change-Id: Ife06fe5234f31433328460cb2e0741c071deda41
Reviewed-on: https://go-review.googlesource.com/20235
Run-TryBot: Todd Neal <todd@tneal.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Todd Neal <todd@tneal.org>
This only deals with the loads themselves. The bounds checks
are a separate issue. Also doesn't handle stores, those are
harder because we need to make sure intermediate memory states
aren't observed (which is hard to do with rewrite rules).
Use one byte shorter instructions for zero-extending loads.
Update #14267
Change-Id: I40af25ab5208488151ba7db32bf96081878fa7d9
Reviewed-on: https://go-review.googlesource.com/20218
Reviewed-by: Alexandru Moșoi <alexandru@mosoi.ro>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
They were only used for rtype.ptrToThis which David Crawshaw removed a couple
of weeks ago. Removes two traversals of Ctxt.Allsym from the linker but it
doesn't seem to make much difference to performance.
Change-Id: I5c305e0180186f643221d57822d301de4aa18827
Reviewed-on: https://go-review.googlesource.com/20287
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The new code is a bit less efficient,
but it does not involve altering the structure
of any linked lists.
This will make it easier to replace NodeLists
with Node slices.
We can return to a more efficient algorithm
when NodeLists have been replaced.
Passes toolstash -cmp.
Change-Id: I0bb5ee75e7c0646e6d37fe558c8f0548729d8aa1
Reviewed-on: https://go-review.googlesource.com/20277
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
No immediate reduction in the size of Addr.
Passes toolstash -cmp.
Change-Id: I78ea4c6e181b6e571ce70a5f1ae8158844eb197d
Reviewed-on: https://go-review.googlesource.com/20276
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Add tests to ensure that the size of important types don't change
unexpectedly.
Skip the test on nacl platforms because of their unusual padding
requirements.
Change-Id: Iddb127a99499e089a309b721f5073356c0da8b24
Reviewed-on: https://go-review.googlesource.com/20285
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Dave Cheney <dave@cheney.net>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Removes specialized functions for each verb and float/complex size
and replaces them with generic variants fmtFloat and
fmtComplex similar to other generic fmt functions.
Simplifies the complex formatting by relying on fmtFloat
to handle the verb and default precision selection.
Complex imaginary formatting does not need to clear the f.space flag
because the set f.plus flag will force a sign instead of a space.
Sets default precision for %b to -1 (same as %g and %G)
since precision for %b has no affect in strconv.AppendFloat.
Add more tests and group them a bit better.
Use local copies of +Inf,-Inf and NaN instead
of math package functions for testing.
Saves around 8kb in the go binary.
name old time/op new time/op delta
SprintfFloat-2 200ns ± 4% 196ns ± 4% -1.55% (p=0.007 n=20+20)
SprintfComplex-2 569ns ± 4% 570ns ± 3% ~ (p=0.804 n=20+20)
Change-Id: I36d35dab6f835fc2bd2c042ac97705868eb2446f
Reviewed-on: https://go-review.googlesource.com/20252
Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Rob Pike <r@golang.org>
Reuse the internal buffer and use append versions of
the strconv quote functions to avoid some allocations.
Add more tests.
name old time/op new time/op delta
SprintfQuoteString-2 486ns ± 2% 416ns ± 2% -14.42% (p=0.000 n=20+20)
name old allocs/op new allocs/op delta
SprintfQuoteString-2 4.00 ± 0% 2.00 ± 0% -50.00% (p=0.000 n=20+20)
Change-Id: I63795b51fd95c53c5993ec8e6e99b659941f9f54
Reviewed-on: https://go-review.googlesource.com/20251
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Instead of calling printArg in fmtBytes to format each byte call
the byte formatting functions directly since it is known each
element is of type byte.
Add more tests for byte slice and array formatting.
name old time/op new time/op delta
SprintfBytes-2 843ns ±16% 417ns ±11% -50.58% (p=0.000 n=20+20)
Change-Id: I5b907dbf52091e3de9710b09d67649c76f4c17e9
Reviewed-on: https://go-review.googlesource.com/20176
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Current runtime.WriteHeapProfile() doesn't print correct
EnableGC. Even if GOGC=off, the result file has below line:
# EnableGC = true
It is hard to print correct status of the variable because of corner
cases e.g. initialization. For avoiding confusion, this commit removes
the print.
Change-Id: Ia792454a6c650bdc50a06fbaff4df7b6330ae08a
Reviewed-on: https://go-review.googlesource.com/18600
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
formatFloat should restore the original f.wid value before
returning. Callers should not have to save and restore f.wid.
Fixes: #14642
Change-Id: I531dae15c7997fe8909e2ad1ef7c376654afb030
Reviewed-on: https://go-review.googlesource.com/20179
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
The new check corresponds to the (etype != TANY || Debug['A'] != 0)
that was lost in golang.org/cl/19936.
Fixes#14652.
Change-Id: Iec3788ff02529b3b0f0d4dd92ec9f3ef20aec849
Reviewed-on: https://go-review.googlesource.com/20271
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Instead make substArgTypes responsible for cloning the function
definition Node and the function signature Type tree.
Passes toolstash -cmp.
Change-Id: I9ec84c90a7ae83d164d3f578e84a91cf1490d8ab
Reviewed-on: https://go-review.googlesource.com/20239
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Update supportsUnaligned in xor.go to be true for
GOARCH values ppc64le and ppc64. This allows the
xor of long buffers to be done on double words
(8 bytes) instead of a single byte at a time, which
significantly improves performance.
Fixes#14350
Change-Id: Iccc6b9d3df2e604a55f4c1e4890bdd3bb0d77ab0
Reviewed-on: https://go-review.googlesource.com/19519
Reviewed-by: Minux Ma <minux@golang.org>
Also fix some uses of nodeSeqIterator.Len, and fix the implementation in
nodesIterator.
Passes toolstash -cmp.
Update #14473.
Change-Id: I228871470234b7f1314ffd2aae8a4c0624c35f98
Reviewed-on: https://go-review.googlesource.com/20231
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When the linker was written in C, command line arguments were passed
around as null-terminated byte arrays which encouraged checking
characters one at a time. In Go, that can easily lead to
out-of-bounds panics.
Use the more idiomatic strings.HasPrefix when checking cmd/link's -B
argument to avoid the panic, and replace the manual hex decode with
use of the encoding/hex package.
Fixes#14636
Change-Id: I45f765bbd8cf796fee1a9a3496178bf76b117827
Reviewed-on: https://go-review.googlesource.com/20211
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
gcMarkRootCheck takes ~10ns per goroutine. This is just a debugging
check, so disable it (plus, if something is going to go wrong, it's
more likely to go wrong during concurrent mark).
We may be able to re-enable this later, or move it to after we've
started the world again. (But not for 1.6.x.)
For 1.6.x.
Fixes#14419.
name / 95%ile-time/markTerm old new delta
500kIdleGs-12 24.0ms ± 0% 18.9ms ± 6% -21.46% (p=0.000 n=15+20)
Change-Id: Idb2a2b1771449de772c159ef95920d6df1090666
Reviewed-on: https://go-review.googlesource.com/20148
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently we reset the mark state during STW sweep termination. This
involves looping over all of the goroutines. Each iteration of this
loop takes ~25ns, so at around 400k goroutines, we'll exceed our 10ms
pause goal.
However, it's safe to do this before we stop the world for sweep
termination because nothing is consuming this state yet. Hence, move
the reset to just before STW.
This isn't perfect: a long reset can still delay allocating goroutines
that block on GC starting. But it's certainly better to block some
things eventually than to block everything immediately.
For 1.6.x.
Fixes#14420.
name \ 95%ile-time/sweepTerm old new delta
500kIdleGs-12 11312µs ± 6% 18.9µs ± 6% -99.83% (p=0.000 n=16+20)
Change-Id: I9815c4d8d9b0d3c3e94dfdab78049cefe0dcc93c
Reviewed-on: https://go-review.googlesource.com/20147
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Also fix compiler-invoked panics to avoid a confusing "malloc deadlock"
crash if they are invoked while executing the runtime.
Fixes#14599.
Change-Id: I89436abcbf3587901909abbdca1973301654a76e
Reviewed-on: https://go-review.googlesource.com/20219
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Many read-only strings in Go binaries are substrings of other read-only
strings. A common source is the text form of type information, which
will include both "struct { X int }" and "*struct { X int }" or
"*bytes.Reader" and "func(*bytes.Reader)" in the same binary.
Because this character data is referred to by separate string headers,
we can skip writing the smaller string and modify the pointer
relocation to point to the larger string. This CL does this
deduplication in the linker after the reachable set of strings has
been determined.
This removes 765KB from juju (1.4% without DWARF).
Link time goes at tip goes form 4.6s to 6.3s, but note that this CL
is part of a series that recently reduced link time from 9.6s.
For #6853.
Change-Id: Ib2087cf627c9f1e9a1181f9b4c8f81d1a3f42191
Reviewed-on: https://go-review.googlesource.com/19987
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
go test github.com/onsi/gomega/gbytes now passes at tip, and tests
added to the reflect package.
Fixes#14645
Change-Id: I16216c1a86211a1103d913237fe6bca5000cf885
Reviewed-on: https://go-review.googlesource.com/20221
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Minalign > 1 implies that relocations inserted by the linker cannot
target arbitrary bytes.
Related to #14604
Change-Id: Ie68d14887bc4047d9b29b0cb1149a8d14b6c62e2
Reviewed-on: https://go-review.googlesource.com/20214
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
To turn ssa compilation on or off altogether, use
-ssa=1 or -ssa=0. Default is on.
To turn on or off consistency checks, do
-d=ssa/check/on or -d=ssa/check/off. Default is on for now.
Change-Id: I277e0311f538981c8b9c62e7b7382a0c8755ce4c
Reviewed-on: https://go-review.googlesource.com/20217
Reviewed-by: David Chase <drchase@google.com>
Passing copy==1 to syslook is only necessary to support subsequent
calls to substArgTypes. typ2Itab and concatstring* don't have "any"
parameters, so no point in deep copying their function signatures at
every call site.
For a couple other syslook calls (makemap and conv[IET]2[IET]), move
them closer to their corresponding substArgTypes calls so it's easier
to see that all syslook(fn, 1) calls are necessary.
Change-Id: I4a0588ab2b8b5b8ce7a0a44b24c8cf8fda489af6
Reviewed-on: https://go-review.googlesource.com/20215
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The changes to internal/big are completely automatic
by running vendor.bash in that directory.
Also added respective test case.
For #14553.
Change-Id: I98b124bcc9ad9e9bd987943719be27864423cb5d
Reviewed-on: https://go-review.googlesource.com/20199
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When a big.Float is converted to a denormal float32/64, the rounding
precision depends on the size of the denormal. Rounding may round up
and thus change the size (exponent) of the denormal. Recompute the
correct precision again for correct placement of the mantissa.
Fixes#14553.
Change-Id: Iedab5810a2d2a405cc5da28c6de7be34cb035b86
Reviewed-on: https://go-review.googlesource.com/20198
Reviewed-by: Alan Donovan <adonovan@google.com>
Good riddance to another one-off linked list type.
Change-Id: Idf9926a701ab4da8a022be1d61f1257020d58fc5
Reviewed-on: https://go-review.googlesource.com/20212
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This is mostly changing the opXXX helpers to take an int16 (matching Prog.As)
argument and return a uint32. The only bit that's not completely trivial is
passing -p.As to opirr to signal operating on a shifted constant, because AADD
+ ALAST overflows int16.
Change-Id: I69133800bbe41c38fa4a89bbbf49823043b3419c
Reviewed-on: https://go-review.googlesource.com/20182
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This CL addresses some issues noted during CL 20089.
Change-Id: I4e91a8077c07a571ccc9c004278672eb951c5104
Reviewed-on: https://go-review.googlesource.com/20181
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Dave Cheney <dave@cheney.net>
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The existing implementation returns nil, ErrBufferFull when n > len(b.buf),
now it will return any data in the buffer and ErrBufferFull.
Fixes#14121
Change-Id: Ie52d32ccd80e4078ebfae6e75393c89675959ead
Reviewed-on: https://go-review.googlesource.com/19091
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Move a few local fields all the way to []*Node while I'm at it.
Update #14473.
Change-Id: Ib18360879839ac592f778cf1042f111bdf14add3
Reviewed-on: https://go-review.googlesource.com/20197
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Automated CL prepared by github.com/mdempsky/unconvert, except for
reverting changes to ssa/rewritegeneric.go (generated file) and
package big (vendored copy of math/big).
Change-Id: I64dc4199f14077c7b6a2f334b12249d4a785eadd
Reviewed-on: https://go-review.googlesource.com/20089
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Dave Cheney <dave@cheney.net>
cmd/vet's printf checker currently uses a hardcoded map of function
names to expected positions of format strings. We can be a bit more
precise than this by looking up the signature of the function, which
helps when libraries implement functions like Errorf or Logf with
extra arguments like log levels or error codes.
Specifically, the format string param is assumed to be the last string
parameter of the called function.
Fixes#12294.
Change-Id: Icf10ebb819bba91fa1c4109301417042901e34c7
Reviewed-on: https://go-review.googlesource.com/20163
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Also rewrite bexport.go to use nodeSeqIterate.
The new setNodeSeq is a transitional generic function to set either a
NodeList or a slice to either a NodeList or a slice. This should permit
us to flip fields from *NodeList to []*Node, or Nodes, without changing
other code.
Passes toolstash -cmp.
Change-Id: I872cbfe45bc5f432595737c1f6da641c502b1ab6
Reviewed-on: https://go-review.googlesource.com/20194
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The ssa compiler uses the duffcopy and duffzero functions,
which rely on the MOVUPS instructions.
However, this doesn't work on Plan 9, since floating point
operations are not allowed in the note handler.
This change disables the use of duffcopy and duffzero
on Plan 9 in the ssa compiler.
Updates #14605.
Change-Id: I017f8ff83de00eabaf7e146b4344a863db1dfddc
Reviewed-on: https://go-review.googlesource.com/20171
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David du Colombier <0intro@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
I tried to write a program to convert *NodeList to Node, but ran into
too many problem cases. I'm backing off and trying a more iterative
approach using interfaces.
This CL adds an interface for iteration over either a *NodeList or a
Nodes. I changed typechecklist to use it, to show how it works. After
NodeList is eliminated, we can change the typechecklist parameter type
to Nodes.
Passes toolstash -cmp.
Change-Id: I5c7593714b020d20868b99151b1e7cadbbdbc397
Reviewed-on: https://go-review.googlesource.com/20190
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This CL introduces a mergestrings pass after the reachability
analysis to combine all reachable go.string."..." character data
symbols into a single symbol.
Shrinks juju by 1.2mb (1.5%).
Shrinks cmd/go by 0.5% when building without DWARF.
No noticable effect on linker speed.
Change-Id: I2ba3e60bf418f65766bda257f6ca9eea26d895b6
Reviewed-on: https://go-review.googlesource.com/20165
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The listsort function is no longer used, except in a test. Change the
test to use sort.Sort instead.
Change-Id: Ib634705cc1bc3b1d8fc3795bd4ed2894e6abc284
Reviewed-on: https://go-review.googlesource.com/19964
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
No extra buffering is needed to save the encoding
since the left padding can be computed and written out
before the encoding is generated.
Add extra tests to both string and byte slice formatting.
name old time/op new time/op delta
SprintfHexString-2 410ns ± 3% 194ns ± 3% -52.60% (p=0.000 n=20+19)
SprintfHexBytes-2 431ns ± 3% 202ns ± 2% -53.13% (p=0.000 n=18+20)
Change-Id: Ibca4316427c89f834e4faee61614493c7eedb42b
Reviewed-on: https://go-review.googlesource.com/20097
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
The ODOTPTRs introduced in CL #19814 don't have field names,
just offsets. The fieldtrack experiment crashes when
examining them. Instead, just ignore them. We'll never track
these fields anyway.
It would be nice to have the runtime type struct build in the
compiler (like we do sudog, for example) so we could use its
fieldnames. Doesn't seem worth it just for this CL.
Change-Id: I5e75024f5a8333eb7439543b3f466ea40213a1b9
Reviewed-on: https://go-review.googlesource.com/20157
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The new Minalign field sets the minimum alignment for all symbols.
This is required for the upcoming s390x port which requires symbols
be 2-byte aligned for efficient relative addressing.
All preexisting architectures have Minalign set to 1 which means
that this commit should have no effect.
I tested values of 2, 4 and 8 on linux amd64 and the tests appear to
pass. Increasing Minalign to 16 appears to break the runtime. I
think this is due to assumptions made about the layout of module
data.
toolstash -cmp on linux amd64 shows no changes due to this commit.
Resolves#14604
Change-Id: I0fe042d52c4e4732eba5fabcd0c31102a2408764
Reviewed-on: https://go-review.googlesource.com/20149
Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change consolidates functions and methods related to TCPAddr,
TCPConn and TCPListener for maintenance purpose, especially for
documentation. Also refactors Dial error code paths.
The followup changes will update comments and examples.
Updates #10624.
Change-Id: I3333ee218ebcd08928f9e2826cd1984d15ea153e
Reviewed-on: https://go-review.googlesource.com/20009
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Mikio Hara <mikioh.mikioh@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Over the years as more bugs were discovered with the bzip2 library,
new Tests were appended the unit tests and the tests became gnarly.
Clean up the tests to be more consistent with modern Go style in
addition to coalescing common tests into a general version that
iterates over a list of input/output pairs. This has the advantage that
the input, output, and test code are all in the same area, rather than
being sprawled around the test file.
There is no loss of test coverage.
Change-Id: I377ed89378f0b89763d4a56ffc37b22d9c2a369e
Reviewed-on: https://go-review.googlesource.com/20133
Run-TryBot: Joe Tsai <joetsai@digital-static.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
/etc/services is not available on Android. The pure Go implementation
of LookupPort will never succeed on Android. Skipping the test.
Updates #14576.
Change-Id: I707ac24aea3f988656b95b1816ee5c9690106985
Reviewed-on: https://go-review.googlesource.com/20154
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
It appears to be a trivial dreg. Unreferenced. Gone.
Change-Id: I4a5ceed48e84254bc8a07fdb04487a18a0edf965
Reviewed-on: https://go-review.googlesource.com/20122
Run-TryBot: Rob Pike <r@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
Arch backends already provide us Widthint and Widthptr, which is ample
information to figure out how to define the universal "int", "uint",
and "uintptr" types. No need for providing a generic typedef
mechanism beyond that.
Change-Id: I35c0c17a67c80605a9208b93d77d6960b2cbb17d
Reviewed-on: https://go-review.googlesource.com/20153
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
No performance improvement, but possibly more readable.
Linking juju:
tip: real 0m5.470s user 0m6.131s
this: real 0m5.392s user 0m6.087s
Change-Id: I578e94fbe6c11b19d79034c33b3db31d9689d439
Reviewed-on: https://go-review.googlesource.com/20108
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
All callers already had strings. No need to generate byte slice copies
to work on bytes.
Performance not measured, but probably helps at least a bit.
Change-Id: Iec3230b69724fac68caae7aad46f2ce1504e82e5
Reviewed-on: https://go-review.googlesource.com/20136
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Looks a tiny bit faster, which is a surprise. Probably noise.
Motivation is making the LSym structure a little easier to understand.
Linking juju, best of 10:
before: real 0m4.811s user 0m5.582s
after: real 0m4.611s user 0m5.267s
Change-Id: Idbedaf4a6e6e199036a1bbb6760e98c94ed2c282
Reviewed-on: https://go-review.googlesource.com/20142
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Function bodies are not yet hooked up because the node structure is not
100% correct. This commit establishes that we can correctly write bodies
out and read them in again.
- export and import all exported inlined function bodies:
(export GO_GCFLAGS="-newexport"; sh all.bash) working
- inlined functions are not yet hooked up (just dropped on the floor)
- improved tracing output and error messages
- make mkbuiltin.go work for both textual and binary export data
so we can run tests with the new format
Change-Id: I70dc4de419df1b604389c3747041d6dba8730b0b
Reviewed-on: https://go-review.googlesource.com/16284
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Also stop creating a map for each symbol, as it does not seem to help.
Linking juju:
tip: real 0m5.470s user 0m6.131s
this: real 0m4.811s user 0m5.582s
Change-Id: Ib3d931c996396a00942581770ff32df1eb8d6615
Reviewed-on: https://go-review.googlesource.com/20140
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
uint8(s.b & 0xff) ought to produce same code as uint8(s.b)
but it did not. RLH found this one looking for moles to
whack in the GC code.
Change-Id: I883d68ec7a5746d652712be84a274a11256b3b33
Reviewed-on: https://go-review.googlesource.com/20141
Reviewed-by: Keith Randall <khr@golang.org>
Count only the runes up to the requested precision
to decide where to truncate a string.
Change the loop within truncate to need fewer jumps.
name old time/op new time/op delta
SprintfTruncateString-2 188ns ± 3% 155ns ± 3% -17.43% (p=0.000 n=20+20)
Change-Id: I17ca9fc0bb8bf7648599df48e4785251bbc31e99
Reviewed-on: https://go-review.googlesource.com/20098
Reviewed-by: Rob Pike <r@golang.org>
- removed lots of unnecessary int(x) casts
- removed parserline() - was inconsistently used anyway
- minor simplifications in dcl.go
Change-Id: Ibf7de679eea528a31c9692ef1c76a1d9b3239211
Reviewed-on: https://go-review.googlesource.com/20131
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This promotes a connection hang during TLS handshake to a proper error.
This doesn't fully address #14539 because the error reported in that
case is a write-on-socket-not-connected error, which implies that an
earlier error during connection setup is not being checked, but it is
an improvement over the current behaviour.
Updates #14539.
Change-Id: I0571a752d32d5303db48149ab448226868b19495
Reviewed-on: https://go-review.googlesource.com/19990
Reviewed-by: Adam Langley <agl@golang.org>
It looks like the compiler still uses the Cfunc flag for functions
marked as //go:systemstack, but if I'm reading this right, that
doesn't apply here and the linker no longer needs Cfunc.
Change-Id: I63b9192c2f52f41401263c29dc8dfd8be8a901a1
Reviewed-on: https://go-review.googlesource.com/20105
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Unlike RFC 1951 (DEFLATE), bzip2 does not use zero-length Huffman codes
to indicate that the symbol is missing. Instead, bzip2 uses a sparse
bitmap to indicate which symbols are present. Thus, it is undefined what
happens when a length of zero is used. Thus, fix the parsing logic so that
the length cannot ever go below 1-bit similar to how the C logic does things.
To confirm that the C bzip2 utility chokes on this data:
$ echo "425a6836314159265359b1f7404b000000400040002000217d184682ee48
a70a12163ee80960" | xxd -r -p | bzip2 -d
bzip2: Data integrity error when decompressing
For reference see:
bzip2-1.0.6/decompress.c:320
Change-Id: Ic1568f8e7f80cdea51d887b4d712cc239c2fe85e
Reviewed-on: https://go-review.googlesource.com/20119
Run-TryBot: Joe Tsai <joetsai@digital-static.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This per-symbol table was written with the strategy:
1. record offset and write fake header
2. write body
3. seek back to fake header
4. write real header
This CL collects the per-symbol body into a []byte, then writes the
real header followed by the body to the output file. This saves two
seeks per-symbol and overwriting the fake header.
Small performance improvement (3.5%) in best-of-ten links of godoc:
tip: real 0m1.132s user 0m1.256s
this: real 0m1.090s user 0m1.210s
I'm not sure if the performance measured here alone justifies it,
but I think this is an easier to read style of code.
Change-Id: I1663901eb7c2ee330591b8b6550cdff0402ed5dc
Reviewed-on: https://go-review.googlesource.com/20074
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Used by DWARF writer changes in a followup CL.
Change-Id: I6ec40dcfeaba909d9b8f6cf2603bc5b85c1fa873
Reviewed-on: https://go-review.googlesource.com/20073
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Do some easy TODOs.
Move a bunch of other TODOs into bugs.
Change-Id: Iaba9dad6221a2af11b3cbcc512875f4a85842873
Reviewed-on: https://go-review.googlesource.com/20114
Run-TryBot: Todd Neal <todd@tneal.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Todd Neal <todd@tneal.org>
This commit modifies the style of a error message in case of -shadow.
Previously such a message would look like:
foo.go:42: declaration of err shadows declaration at shadow.go:13:
Changes of the commit include highlighting the variable name and
removing the ": "(space intended) at the end of the line:
foo.go:42: declaration of "err" shadows declaration at shadow.go:13
Fixes#14585.
Change-Id: Ia6a6bf396668dcba9a24f025a08d8826db31f434
Reviewed-on: https://go-review.googlesource.com/20093
Reviewed-by: Rob Pike <r@golang.org>
The tree's pretty inconsistent about single space vs double space
after a period in documentation. Make it consistently a single space,
per earlier decisions. This means contributors won't be confused by
misleading precedence.
This CL doesn't use go/doc to parse. It only addresses // comments.
It was generated with:
$ perl -i -npe 's,^(\s*// .+[a-z]\.) +([A-Z]),$1 $2,' $(git grep -l -E '^\s*//(.+\.) +([A-Z])')
$ go test go/doc -update
Change-Id: Iccdb99c37c797ef1f804a94b22ba5ee4b500c4f7
Reviewed-on: https://go-review.googlesource.com/20022
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Dave Day <djd@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The size calculation has been wrong since this code was first committed
in https://golang.org/cl/3120. The effect was that the compiler always
allocated a temporary buffer on the stack for a non-escaping string
concatenation. This turns out to make no practical difference, as the
compiler always allocates a buffer of the same size (32 bytes) and the
runtime only uses the temporary buffer if the concatenated strings
fit (check is in rawstringtmp in runtime/string.go).
The effect of this change is to avoid generating a temporary buffer on
the stack that will not be used.
Change-Id: Id632bfe3d6c113c9934c018a2dd4bcbf1784a63d
Reviewed-on: https://go-review.googlesource.com/20112
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This check seems to apply to all code instrumentation, not just -race.
Fixes#14589.
Change-Id: I16ae07749ede7c1e6ed06f472711638d195034ac
Reviewed-on: https://go-review.googlesource.com/20113
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Marvin Stenger <marvin.stenger94@gmail.com>
This is a subset of https://golang.org/cl/20022 with only the copyright
header lines, so the next CL will be smaller and more reviewable.
Go policy has been single space after periods in comments for some time.
The copyright header template at:
https://golang.org/doc/contribute.html#copyright
also uses a single space.
Make them all consistent.
Change-Id: Icc26c6b8495c3820da6b171ca96a74701b4a01b0
Reviewed-on: https://go-review.googlesource.com/20111
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Also: Use same ordering of tokens in the various tables/maps.
Change-Id: Ief84c6ca3da36213ace6b2c10b513e2ca16318ab
Reviewed-on: https://go-review.googlesource.com/20110
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
SSA is a real compiler now, don't trigger on function names.
Change-Id: Iaf6dd78248c1b6ca2630275bd59f7ea7b7576497
Reviewed-on: https://go-review.googlesource.com/20088
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Static branch predictions (which guide block ordering) are
adjusted based on:
loop/not-loop (favor looping)
abnormal-exit/not (avoid panic)
call/not-call (avoid call)
ret/default (treat returns as rare)
This appears to make no difference in performance of real
code, meaning the compiler itself. The earlier version of
this has been stripped down to help make the cost of this
only-aesthetic-on-Intel phase be as cheap as possible (we
probably want information about inner loops for improving
register allocation, but because register allocation follows
close behind this pass, conceivably the information could be
reused -- so we might do this anyway just to normalize
output).
For a ./make.bash that takes 200 user seconds, about .75
second is reported in likelyadjust (summing nanoseconds
reported with -d=ssa/likelyadjust/time ).
Upstream predictions are respected.
Includes test, limited to build on amd64 only.
Did several iterations on the debugging output to allow
some rough checks on behavior.
Debug=1 logging notes agree/disagree with earlier passes,
allowing analysis like the following:
Run on make.bash:
GO_GCFLAGS=-d=ssa/likelyadjust/debug \
./make.bash >& lkly5.log
grep 'ranch prediction' lkly5.log | wc -l
78242 // 78k predictions
grep 'ranch predi' lkly5.log | egrep -v 'agrees with' | wc -l
29633 // 29k NEW predictions
grep 'disagrees' lkly5.log | wc -l
444 // contradicted 444 times
grep '< exit' lkly5.log | wc -l
10212 // 10k exit predictions
grep '< exit' lkly5.log | egrep 'disagrees' | wc -l
5 // 5 contradicted by previous prediction
grep '< exit' lkly5.log | egrep -v 'agrees' | wc -l
702 // 702-5 redundant with previous prediction
grep '< call' lkly5.log | egrep -v 'agrees' | wc -l
16699 // 16k new call predictions
grep 'stay in loop' lkly5.log | egrep -v 'agrees' | wc -l
3951 // 4k new "remain in loop" predictions
Fixes#11451.
Change-Id: Iafb0504f7030d304ef4b6dc1aba9a5789151a593
Reviewed-on: https://go-review.googlesource.com/19995
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Add a blank line before the "package ssa" lines so the "autogenerated
don't edit" comments don't end up in godoc output.
Change-Id: I82bf90d52d426ce1a8e21483fc8f47b3689259c7
Reviewed-on: https://go-review.googlesource.com/20086
Reviewed-by: Keith Randall <khr@golang.org>
* This is a very basic form of straight line strength reduction.
* Removes one multiplication from a[b].c++; a[b+1].c++
* It increases pressure on the register allocator because
CSE creates more copies of the multiplication sizeof(a[0])*b.
Change-Id: I686a18e9c24cc6f8bdfa925713afed034f7d36d0
Reviewed-on: https://go-review.googlesource.com/20091
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Use only reflect.TypeOf to detect if argument is a string.
The wasString return is only needed in doPrint with the 'v' verb.
This type of string detection is handled correctly by reflect.TypeOf
which is used already in doPrint for identifying a string argument.
Remove now obsolete wasString computations and return values.
Change-Id: Iea2de7ac0f5c536a53eec63f7e679d628f5af8dc
Reviewed-on: https://go-review.googlesource.com/19976
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Also, relocate related const and type definitions from go.go.
Change-Id: Ieb9b672da8dd510ca67022b4f7ae49a778a56579
Reviewed-on: https://go-review.googlesource.com/20080
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Keith Randall <khr@golang.org>
