Increases the exec timeout from 5sec to 1min, but
also print out the error value on any test failure.
Fixes#34836
Change-Id: Ida2b8bd460243491ef0f90dfe0f978dfe02a0703
Reviewed-on: https://go-review.googlesource.com/c/go/+/200519
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Test case with code that caused a gccgo error while emitting export
data for an inlinable function.
Updates #34577.
Change-Id: I28b598c4c893c77f4a76bb4f2d27e5b42f702992
Reviewed-on: https://go-review.googlesource.com/c/go/+/198057
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, escape analysis is able to record at most one dereference
when a parameter leaks to the heap; that is, at call sites, it can't
distinguish between any of these three functions:
func x1(p ****int) { sink = *p }
func x2(p ****int) { sink = **p }
func x3(p ****int) { sink = ***p }
Similarly, it's limited to recording parameter leaks to only the first
4 parameters, and only up to 6 dereferences.
All of these limitations are due to the awkward encoding scheme used
at the moment.
This CL replaces the encoding scheme with a simple [8]uint8 array,
which can handle up to the first 7 parameters, and up to 254
dereferences, which ought to be enough for anyone. And if not, it's
much more easily increased.
Shrinks export data size geometric mean for Kubernetes by 0.07%.
Fixes#33981.
Change-Id: I10a94b9accac9a0c91490e0d6d458316f5ca1e13
Reviewed-on: https://go-review.googlesource.com/c/go/+/197680
Reviewed-by: Cherry Zhang <cherryyz@google.com>
CL 170950 had a regression that makes the compiler produce
an invalid wasm binary if the data section is too large.
Loading such a binary gives the following error:
"LinkError: WebAssembly.instantiate(): data segment is out of bounds"
This change fixes the issue by ensuring that the minimum size of the
linear memory is larger than the end of the data section.
Fixes#34395.
Change-Id: I0c8629de7ffd0d85895ad31bf8c9d45fef197a57
Reviewed-on: https://go-review.googlesource.com/c/go/+/199358
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We're allowed to remove a write barrier when both the old
value in memory and the new value we're writing are not heap pointers.
Improve both those checks a little bit.
A pointer is known to not be a heap pointer if it is read from
read-only memory. This sometimes happens for loads of pointers
from string constants in read-only memory.
Do a better job of tracking which parts of memory are known to be
zero. Before we just kept track of a range of offsets in the most
recently allocated object. For code that initializes the new object's
fields in a nonstandard order, that tracking is imprecise. Instead,
keep a bit map of the first 64 words of that object, so we can track
precisely what we know to be zeroed.
The new scheme is only precise up to the first 512 bytes of the object.
After that, we'll use write barriers unnecessarily. Hopefully most
initializers of large objects will use typedmemmove, which does only one
write barrier check for the whole initialization.
Fixes#34723
Update #21561
Change-Id: Idf6e1b7d525042fb67961302d4fc6f941393cac8
Reviewed-on: https://go-review.googlesource.com/c/go/+/199558
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
For commuting ops, check whether the second argument is dead before
checking if the first argument is rematerializeable. Reusing the register
holding a dead value is always best.
Fixes#33580
Change-Id: I7372cfc03d514e6774d2d9cc727a3e6bf6ce2657
Reviewed-on: https://go-review.googlesource.com/c/go/+/199559
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
CL 188317 introduced a compiler crash during dwarf generation which
was reported as Issue #34520. After CL 188217, the issue appears to be
fixed. Add a testcase to avoid future regressions.
Fixes#34520
Change-Id: I73544a9e9baf8dbfb85c19eb6d202beea05affb6
Reviewed-on: https://go-review.googlesource.com/c/go/+/198546
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Nilcheck would move statements from NilCheck values to others that
turned out were already dead, which leads to lost statements. Better
to eliminate the dead code first.
One "error" is removed from test/prove.go because the code is
actually dead, and the additional deadcode pass removes it before
prove can run.
Change-Id: If75926ca1acbb59c7ab9c8ef14d60a02a0a94f8b
Reviewed-on: https://go-review.googlesource.com/c/go/+/198479
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
During package initialization, the compiler tries to optimize:
var A = "foo"
var B = A
into
var A = "foo"
var B = "foo"
so that we can statically initialize both A and B and skip emitting
dynamic initialization code to assign "B = A".
However, this isn't safe in the presence of cmd/link's -X flag, which
might overwrite an initialized string-typed variable at link time. In
particular, if cmd/link changes A's static initialization, it won't
know it also needs to change B's static initialization.
To address this, this CL disables this optimization for string-typed
variables.
Fixes#34675.
Change-Id: I1c18f3b855f6d7114aeb39f96aaaf1b452b88236
Reviewed-on: https://go-review.googlesource.com/c/go/+/198657
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
By lazily starting the signal watch loop only on Notify,
we are able to have deadlock detection even when
"os/signal" is imported.
Thanks to Ian Lance Taylor for the solution and discussion.
With this change in, fix a runtime gorountine count test that
assumed that os/signal.init would unconditionally start the
signal watching goroutine, but alas no more.
Fixes#21576.
Change-Id: I6eecf82a887f59f2ec8897f1bcd67ca311ca42ff
Reviewed-on: https://go-review.googlesource.com/c/go/+/101036
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
ORUNESTR represents the special case of integer->string conversion. If
the integer is a constant, then the string is a constant too, so
evconst needs to perform constant folding here.
Passes toolstash-check.
Fixes#34563.
Change-Id: Ieab3d76794d8ce570106b6b707a4bcd725d156e9
Reviewed-on: https://go-review.googlesource.com/c/go/+/197677
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
prove wasn't able to detect induction variables that was bound
by another inducation variable. This happened because an indvar
is a Phi, and thus in case of a dependency, the loop bounding
condition looked as Phi < Phi. This triggered an existing
codepath that checked whether the upper bound was a Phi to
detect loop conditions written in reversed order respect to the
idiomatic way (eg: for i:=0; len(n)>i; i++).
To fix this, we call the indvar pattern matching on both operands
of the loop condition, so that the first operand that matches
will be treated as the indvar.
Updates #24660 (removes a boundcheck from Fannkuch)
Change-Id: Iade83d8deb54f14277ed3f2e37b190e1ed173d11
Reviewed-on: https://go-review.googlesource.com/c/go/+/195220
Reviewed-by: David Chase <drchase@google.com>
Previously, we would recognize &(T{...}) expressions during type
checking, rewrite them into (*T){...}, and then do a lot of extra work
to make sure the user doesn't write (*T){...} themselves and
resynthesizing the OPTRLIT later on.
This CL simply handles &T{...} directly in the straight forward
manner, by changing OADDR directly to OPTRLIT when appropriate.
While here, match go/types's invalid composite literal type error
message.
Passes toolstash-check.
Change-Id: I902b14c7e2cd9fa93e6915dd58272d2352ba38f8
Reviewed-on: https://go-review.googlesource.com/c/go/+/197120
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Now that OpSliceMake is called by runtime.makeslice callers,
prove can see and record the actual length and cap of each
slice being constructed.
This small patch is enough to remove 260 additional bound checks
from cmd+std.
Thanks to Martin Möhrmann for pointing me to CL141822 that
I had missed.
Updates #24660
Change-Id: I14556850f285392051f3f07d13b456b608b64eb9
Reviewed-on: https://go-review.googlesource.com/c/go/+/196784
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Add a bunch of extra tests and benchmarks for defer, in preparation for new
low-cost (open-coded) implementation of defers (see #34481),
- New file defer_test.go that tests a bunch more unusual defer scenarios,
including things that might have problems for open-coded defers.
- Additions to callers_test.go actually verifying what the stack trace looks like
for various panic or panic-recover scenarios.
- Additions to crash_test.go testing several more crash scenarios involving
recursive panics.
- New benchmark in runtime_test.go measuring speed of panic-recover
- New CGo benchmark in cgo_test.go calling from Go to C back to Go that
shows defer overhead
Updates #34481
Change-Id: I423523f3e05fc0229d4277dd00073289a5526188
Reviewed-on: https://go-review.googlesource.com/c/go/+/197017
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Currently, when we create an OPTRLIT node, it defaults to the
OCOMPLIT's final element's position. But it improves error messages to
use the OCOMPLIT's own position instead.
Change-Id: Ibb031f543c7248d88d99fd0737685e01d86e2500
Reviewed-on: https://go-review.googlesource.com/c/go/+/197119
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This commit just adds a regress test for a few of the important corner
cases that I identified in #27557, which turn out to not be tested
anywhere.
While here, annotate a few of the existing test cases where we could
improve escape analysis.
Updates #27557.
Change-Id: Ie57792a538f7899bb17915485fabc86100f469a3
Reviewed-on: https://go-review.googlesource.com/c/go/+/197137
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
On modern 64bit CPUs a SHR, SHL or AND instruction take 1 cycle to execute.
A pair of shifts that operate on the same register will take 2 cycles
and needs to wait for the input register value to be available.
Large constants used to mask the high bits of a register with an AND
instruction can not be encoded as an immediate in the AND instruction
on amd64 and therefore need to be loaded into a register with a MOV
instruction.
However that MOV instruction is not dependent on the output register and
on many CPUs does not compete with the AND or shift instructions for
execution ports.
Using a pair of shifts to mask high bits instead of an AND to mask high
bits of a register has a shorter encoding and uses one less general
purpose register but is slower due to taking one clock cycle longer
if there is no register pressure that would make the AND variant need to
generate a spill.
For example the instructions emitted for (x & 1 << 63) before this CL are:
48c1ea3f SHRQ $0x3f, DX
48c1e23f SHLQ $0x3f, DX
after this CL the instructions are the same as GCC and LLVM use:
48b80000000000000080 MOVQ $0x8000000000000000, AX
4821d0 ANDQ DX, AX
Some platforms such as arm64 already have SSA optimization rules to fuse
two shift instructions back into an AND.
Removing the general rule to rewrite AND to SHR+SHL speeds up this benchmark:
var GlobalU uint
func BenchmarkAndHighBits(b *testing.B) {
x := uint(0)
for i := 0; i < b.N; i++ {
x &= 1 << 63
}
GlobalU = x
}
amd64/darwin on Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz:
name old time/op new time/op delta
AndHighBits-4 0.61ns ± 6% 0.42ns ± 6% -31.42% (p=0.000 n=25+25):
'go run run.go -all_codegen -v codegen' passes with following adjustments:
ARM64: The BFXIL pattern ((x << lc) >> rc | y & ac) needed adjustment
since ORshiftRL generation fusing '>> rc' and '|' interferes
with matching ((x << lc) >> rc) to generate UBFX. Previously
ORshiftLL was created first using the shifts generated for (y & ac).
S390X: Add rules for abs and copysign to match use of AND instead of SHIFTs.
Updates #33826
Updates #32781
Change-Id: I5a59f6239660d53c029cd22dfb44ddf39f93a56c
Reviewed-on: https://go-review.googlesource.com/c/go/+/196810
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
On modern 64bit CPUs a SHR, SHL or AND instruction take 1 cycle to execute.
A pair of shifts that operate on the same register will take 2 cycles
and needs to wait for the input register value to be available.
Large constants used to mask the high bits of a register with an AND
instruction can not be encoded as an immediate in the AND instruction
on amd64 and therefore need to be loaded into a register with a MOV
instruction.
However that MOV instruction is not dependent on the output register and
on many CPUs does not compete with the AND or shift instructions for
execution ports.
Using a pair of shifts to mask high bits instead of an AND to mask high
bits of a register has a shorter encoding and uses one less general
purpose register but is slower due to taking one clock cycle longer
if there is no register pressure that would make the AND variant need to
generate a spill.
For example the instructions emitted for (x & 1 << 63) before this CL are:
48c1ea3f SHRQ $0x3f, DX
48c1e23f SHLQ $0x3f, DX
after this CL the instructions are the same as GCC and LLVM use:
48b80000000000000080 MOVQ $0x8000000000000000, AX
4821d0 ANDQ DX, AX
Some platforms such as arm64 already have SSA optimization rules to fuse
two shift instructions back into an AND.
Removing the general rule to rewrite AND to SHR+SHL speeds up this benchmark:
var GlobalU uint
func BenchmarkAndHighBits(b *testing.B) {
x := uint(0)
for i := 0; i < b.N; i++ {
x &= 1 << 63
}
GlobalU = x
}
amd64/darwin on Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz:
name old time/op new time/op delta
AndHighBits-4 0.61ns ± 6% 0.42ns ± 6% -31.42% (p=0.000 n=25+25):
'go run run.go -all_codegen -v codegen' passes with following adjustments:
ARM64: The BFXIL pattern ((x << lc) >> rc | y & ac) needed adjustment
since ORshiftRL generation fusing '>> rc' and '|' interferes
with matching ((x << lc) >> rc) to generate UBFX. Previously
ORshiftLL was created first using the shifts generated for (y & ac).
S390X: Add rules for abs and copysign to match use of AND instead of SHIFTs.
Updates #33826
Updates #32781
Change-Id: I43227da76b625de03fbc51117162b23b9c678cdb
Reviewed-on: https://go-review.googlesource.com/c/go/+/194297
Run-TryBot: Martin Möhrmann <martisch@uos.de>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
i32.eqz instructions don't appear unless needed in if conditions anymore
after CL 195204. I forgot to run the codegen tests while submitting the CL.
Thanks to @martisch for catching it.
Fixes#34442
Change-Id: I177b064b389be48e39d564849714d7a8839be13e
Reviewed-on: https://go-review.googlesource.com/c/go/+/196580
Run-TryBot: Agniva De Sarker <agniva.quicksilver@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Martin Möhrmann <moehrmann@google.com>
When compiling expression switches, we try to optimize runs of
constants into binary searches. The ordering used isn't visible to the
application, so it's unimportant as long as we're consistent between
sorting and searching.
For strings, it's much cheaper to compare string lengths than strings
themselves, so instead of ordering strings by "si <= sj", we currently
order them by "len(si) < len(sj) || len(si) == len(sj) && si <= sj"
(i.e., the lexicographical ordering on the 2-tuple (len(s), s)).
However, it's also somewhat cheaper to compare strings for equality
(i.e., ==) than for ordering (i.e., <=). And if there were two or
three string constants of the same length in a switch statement, we
might unnecessarily emit ordering comparisons.
For example, given:
switch s {
case "", "1", "2", "3": // ordered by length then content
goto L
}
we currently compile this as:
if len(s) < 1 || len(s) == 1 && s <= "1" {
if s == "" { goto L }
else if s == "1" { goto L }
} else {
if s == "2" { goto L }
else if s == "3" { goto L }
}
This CL switches to using a 2-level binary search---first on len(s),
then on s itself---so that string ordering comparisons are only needed
when there are 4 or more strings of the same length. (4 being the
cut-off for when using binary search is actually worthwhile.)
So the above switch instead now compiles to:
if len(s) == 0 {
if s == "" { goto L }
} else if len(s) == 1 {
if s == "1" { goto L }
else if s == "2" { goto L }
else if s == "3" { goto L }
}
which is better optimized by walk and SSA. (Notably, because there are
only two distinct lengths and no more than three strings of any
particular length, this example ends up falling back to simply using
linear search.)
Test case by khr@ from CL 195138.
Fixes#33934.
Change-Id: I8eeebcaf7e26343223be5f443d6a97a0daf84f07
Reviewed-on: https://go-review.googlesource.com/c/go/+/195340
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
golang.org/cl/109517 optimized the compiler to avoid the allocation for make in
append(x, make([]T, y)...). This was only implemented for the case that y has type int.
This change extends the optimization to trigger for all integer types where the value
is known at compile time to fit into an int.
name old time/op new time/op delta
ExtendInt-12 106ns ± 4% 106ns ± 0% ~ (p=0.351 n=10+6)
ExtendUint64-12 1.03µs ± 5% 0.10µs ± 4% -90.01% (p=0.000 n=9+10)
name old alloc/op new alloc/op delta
ExtendInt-12 0.00B 0.00B ~ (all equal)
ExtendUint64-12 13.6kB ± 0% 0.0kB -100.00% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
ExtendInt-12 0.00 0.00 ~ (all equal)
ExtendUint64-12 1.00 ± 0% 0.00 -100.00% (p=0.000 n=10+10)
Updates #29785
Change-Id: Ief7760097c285abd591712da98c5b02bc3961fcd
Reviewed-on: https://go-review.googlesource.com/c/go/+/182559
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This CL expands the test for #29612 to check that type switches also
work correctly when type hashes collide.
Change-Id: Ia153743e6ea0736c1a33191acfe4d8ba890be527
Reviewed-on: https://go-review.googlesource.com/c/go/+/195782
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Support for overlapping interfaces is a new (proposed) Go language
feature to be supported in Go 1.14, so it shouldn't be supported under
-lang=go1.13 or earlier.
Fixes#34329.
Change-Id: I5fea5716b7d135476980bc40b4f6e8c611b67735
Reviewed-on: https://go-review.googlesource.com/c/go/+/195678
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This reverts CL 192101.
Reason for revert: The same paragraph was added 2 weeks ago
(look a few lines above)
Change-Id: I05efb2631d7b4966f66493f178f2a649c715a3cc
Reviewed-on: https://go-review.googlesource.com/c/go/+/195637
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This information is redundant with the position information already
provided. Also, no other -m diagnostics print out function name.
While here, report parameter leak diagnostics against the parameter
declaration position rather than the function, and use Warnl for
"moved to heap" messages.
Test cases updated programmatically by removing the first word from
every "no match for" error emitted by run.go:
go run run.go |& \
sed -E -n 's/^(.*):(.*): no match for `([^ ]* (.*))` in:$/\1!\2!\3!\4/p' | \
while IFS='!' read -r fn line before after; do
before=$(echo "$before" | sed 's/[.[\*^$()+?{|]/\\&/g')
after=$(echo "$after" | sed -E 's/(\&|\\)/\\&/g')
fn=$(find . -name "${fn}" | head -1)
sed -i -E -e "${line}s/\"${before}\"/\"${after}\"/" "${fn}"
done
Passes toolstash-check.
Change-Id: I6e02486b1409e4a8dbb2b9b816d22095835426b5
Reviewed-on: https://go-review.googlesource.com/c/go/+/195040
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
It is useful to know about the -all_codegen option for running
codegen tests for all platforms. I was puzzling that some codegen
test was not failing on my local machine or on trybot, until I
found this option.
Change-Id: I062cf4d73f6a6c9ebc2258195779d2dab21bc36d
Reviewed-on: https://go-review.googlesource.com/c/go/+/192101
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change adds an intrinsic for Mul64 on s390x. To achieve that,
a new assembly instruction, MLGR, is introduced in s390x/asmz.go. This assembly
instruction directly uses an existing instruction on Z and supports multiplication
of two 64 bit unsigned integer and stores the result in two separate registers.
In this case, we require the multiplcand to be stored in register R3 and
the output result (the high and low 64 bit of the product) to be stored in
R2 and R3 respectively.
A test case is also added.
Benchmark:
name old time/op new time/op delta
Mul-18 11.1ns ± 0% 1.4ns ± 0% -87.39% (p=0.002 n=8+10)
Mul32-18 2.07ns ± 0% 2.07ns ± 0% ~ (all equal)
Mul64-18 11.1ns ± 1% 1.4ns ± 0% -87.42% (p=0.000 n=10+10)
Change-Id: Ieca6ad1f61fff9a48a31d50bbd3f3c6d9e6675c1
Reviewed-on: https://go-review.googlesource.com/c/go/+/194572
Reviewed-by: Michael Munday <mike.munday@ibm.com>
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Part of the general trend of moving yyerror calls out of walk and into
typecheck.
Notably, this requires splitting test/typeswitch2.go into two files,
because now some of the errors are reported during typecheck and
others are still reported during walk; and if there were any errors
during typecheck, then cmd/compile exits without invoking walk.
Passes toolstash-check.
Change-Id: I05ee0c00b99af659ee1eef098d342d0d736cf31e
Reviewed-on: https://go-review.googlesource.com/c/go/+/194659
Reviewed-by: Robert Griesemer <gri@golang.org>
This CL moves parameter tagging to before escape analysis is complete,
so we still have access to EscLocation. This will be useful once
EscLocation starts tracking higher-fidelity escape details.
Notably, this CL stops using n.Esc to record parameter escape analysis
details. Now escape analysis only ever sets n.Esc to EscNone or
EscHeap. (It still defaults to EscUnknown, and is set to EscNever in
some places though.)
Passes toolstash-check.
Updates #33981.
Change-Id: I50a91ea1e38c442092de6cd14e20b211f8f818c9
Reviewed-on: https://go-review.googlesource.com/c/go/+/193178
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This CL gets rid of the MOVDreg and MOVDnop SSA operations on
s390x. They were originally inserted to help avoid situations
where a sign/zero extension was elided but a spill invalidated
the optimization. It's not really clear we need to do this though
(amd64 doesn't have these ops for example) so long as we are
careful when removing sign/zero extensions. Also, the MOVDreg
technique doesn't work if the register is spilled before the
MOVDreg op (I haven't seen that in practice).
Removing these ops reduces the complexity of the rules and also
allows us to unblock optimizations. For example, the compiler can
now merge the loads in binary.{Big,Little}Endian.PutUint16 which
it wasn't able to do before. This CL reduces the size of the .text
section in the go tool by about 4.7KB (0.09%).
Change-Id: Icaddae7f2e4f9b2debb6fabae845adb3f73b41db
Reviewed-on: https://go-review.googlesource.com/c/go/+/173897
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Previously, we used a single "untyped number" type for all untyped
numeric constants. This led to vague error messages like "string(1.0)"
reporting that "1 (type untyped number)" can't be converted to string,
even though "string(1)" is valid.
This CL makes cmd/compile more like go/types by utilizing
types.Ideal{int,rune,float,complex} instead of types.Types[TIDEAL],
and keeping n.Type in sync with n.Val().Ctype() during constant
folding.
Thanks to K Heller for looking into this issue, and for the included
test case.
Fixes#21979.
Change-Id: Ibfea88c05704bc3c0a502a455d018a375589754d
Reviewed-on: https://go-review.googlesource.com/c/go/+/194019
Reviewed-by: Robert Griesemer <gri@golang.org>
On modern 64bit CPUs a SHR, SHL or AND instruction take 1 cycle to execute.
A pair of shifts that operate on the same register will take 2 cycles
and needs to wait for the input register value to be available.
Large constants used to mask the high bits of a register with an AND
instruction can not be encoded as an immediate in the AND instruction
on amd64 and therefore need to be loaded into a register with a MOV
instruction.
However that MOV instruction is not dependent on the output register and
on many CPUs does not compete with the AND or shift instructions for
execution ports.
Using a pair of shifts to mask high bits instead of an AND to mask high
bits of a register has a shorter encoding and uses one less general
purpose register but is slower due to taking one clock cycle longer
if there is no register pressure that would make the AND variant need to
generate a spill.
For example the instructions emitted for (x & 1 << 63) before this CL are:
48c1ea3f SHRQ $0x3f, DX
48c1e23f SHLQ $0x3f, DX
after this CL the instructions are the same as GCC and LLVM use:
48b80000000000000080 MOVQ $0x8000000000000000, AX
4821d0 ANDQ DX, AX
Some platforms such as arm64 already have SSA optimization rules to fuse
two shift instructions back into an AND.
Removing the general rule to rewrite AND to SHR+SHL speeds up this benchmark:
var GlobalU uint
func BenchmarkAndHighBits(b *testing.B) {
x := uint(0)
for i := 0; i < b.N; i++ {
x &= 1 << 63
}
GlobalU = x
}
amd64/darwin on Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz:
name old time/op new time/op delta
AndHighBits-4 0.61ns ± 6% 0.42ns ± 6% -31.42% (p=0.000 n=25+25):
Updates #33826
Updates #32781
Change-Id: I862d3587446410c447b9a7265196b57f85358633
Reviewed-on: https://go-review.googlesource.com/c/go/+/191780
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Use the following (suboptimal) script to obtain a list of possible
typos:
#!/usr/bin/env sh
set -x
git ls-files |\
grep -e '\.\(c\|cc\|go\)$' |\
xargs -n 1\
awk\
'/\/\// { gsub(/.*\/\//, ""); print; } /\/\*/, /\*\// { gsub(/.*\/\*/, ""); gsub(/\*\/.*/, ""); }' |\
hunspell -d en_US -l |\
grep '^[[:upper:]]\{0,1\}[[:lower:]]\{1,\}$' |\
grep -v -e '^.\{1,4\}$' -e '^.\{16,\}$' |\
sort -f |\
uniq -c |\
awk '$1 == 1 { print $2; }'
Then, go through the results manually and fix the most obvious typos in
the non-vendored code.
Change-Id: I3cb5830a176850e1a0584b8a40b47bde7b260eae
Reviewed-on: https://go-review.googlesource.com/c/go/+/193848
Reviewed-by: Robert Griesemer <gri@golang.org>
This CL detangles the hairy mess that was convlit+defaultlit. In
particular, it makes the following changes:
1. convlit1 now follows the standard typecheck behavior of setting
"n.Type = nil" if there's an error. Notably, this means for a lot of
test cases, we now avoid reporting useless follow-on error messages.
For example, after reporting that "1 << s + 1.0" has an invalid shift,
we no longer also report that it can't be assigned to string.
2. Previously, assignconvfn had some extra logic for trying to
suppress errors from convlit/defaultlit so that it could provide its
own errors with better context information. Instead, this extra
context information is now passed down into convlit1 directly.
3. Relatedly, this CL also removes redundant calls to defaultlit prior
to assignconv. As a consequence, when an expression doesn't make sense
for a particular assignment (e.g., assigning an untyped string to an
integer), the error messages now say "untyped string" instead of just
"string". This is more consistent with go/types behavior.
4. defaultlit2 is now smarter about only trying to convert pairs of
untyped constants when it's likely to succeed. This allows us to
report better error messages for things like 3+"x"; instead of "cannot
convert 3 to string" we now report "mismatched types untyped number
and untyped string".
Passes toolstash-check.
Change-Id: I26822a02dc35855bd0ac774907b1cf5737e91882
Reviewed-on: https://go-review.googlesource.com/c/go/+/187657
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This reverts commit 2da9c3e0f9.
Reason for revert: while the new error messages are more informative,
they're not strictly correct. This CL also conflicts with CL 187657.
Change-Id: I1c36cf7e86c2f35ee83a4f98918ee38aa1f59965
Reviewed-on: https://go-review.googlesource.com/c/go/+/193977
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Follow-up to Change-Id: If6e52c59eab438599d641ecf6f110ebafca740a9
This addresses the remaining tech debt on issue 21979.
The aforementioned previous CL silenced one of two mostly redundant
compiler errors. However, the silenced error was the more expressive
error. This CL now imbues the surviving error with the same level
of expressiveness as the old semi-redundant error.
Fixes#21979
Change-Id: I3273d48c88bbab073fabe53421d801df621ce321
Reviewed-on: https://go-review.googlesource.com/c/go/+/191079
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Test with some code that triggered a compilation error bug in gccgo.
Updates #33866.
Change-Id: Ib2f226bbbebbfae33b41037438fe34dc5f2ad034
Reviewed-on: https://go-review.googlesource.com/c/go/+/193261
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Add block method to preserve loop depth when evaluating statements in a
block, so escape analysis can handle looping label more precisely.
Updates #22438
Change-Id: I39b306544a6c0ee3fcbebbe0d0ee735cb71773e6
Reviewed-on: https://go-review.googlesource.com/c/go/+/193517
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Right now we generate hash functions for all types, just in case they
are used as map keys. That's a lot of wasted effort and binary size
for types which will never be used as a map key. Instead, generate
hash functions only for types that we know are map keys.
Just doing that is a bit too simple, since maps with an interface type
as a key might have to hash any concrete key type that implements that
interface. So for that case, implement hashing of such types at
runtime (instead of with generated code). It will be slower, but only
for maps with interface types as keys, and maybe only a bit slower as
the aeshash time probably dominates the dispatch time.
Reorg where we keep the equals and hash functions. Move the hash function
from the key type to the map type, saving a field in every non-map type.
That leaves only one function in the alg structure, so get rid of that and
just keep the equal function in the type descriptor itself.
cmd/go now has 10 generated hash functions, instead of 504. Makes
cmd/go 1.0% smaller. Update #6853.
Speed on non-interface keys is unchanged. Speed on interface keys
is ~20% slower:
name old time/op new time/op delta
MapInterfaceString-8 23.0ns ±21% 27.6ns ±14% +20.01% (p=0.002 n=10+10)
MapInterfacePtr-8 19.4ns ±16% 23.7ns ± 7% +22.48% (p=0.000 n=10+8)
Change-Id: I7c2e42292a46b5d4e288aaec4029bdbb01089263
Reviewed-on: https://go-review.googlesource.com/c/go/+/191198
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Martin Möhrmann <moehrmann@google.com>
Assinging to 1-element array/1-field struct variable is considered clobbering
the whole variable. By emitting OpVarDef in this case, liveness analysis
can now know the variable is redefined.
Also, the isfat is not necessary anymore, and will be removed in follow up CL.
Fixes#33916
Change-Id: Iece0d90b05273f333d59d6ee5b12ee7dc71908c2
Reviewed-on: https://go-review.googlesource.com/c/go/+/192979
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
In general, a conversion to interface type may require values to be
boxed, which in turn necessitates escape analysis to determine whether
the boxed representation can be stack allocated.
However, esc.go used to unconditionally print escape analysis
decisions about OCONVIFACE, even for conversions that don't require
boxing (e.g., pointers, channels, maps, functions).
For test compatibility with esc.go, escape.go similarly printed these
useless diagnostics. This CL removes the diagnostics, and updates test
expectations accordingly.
Change-Id: I97c57a4a08e44d265bba516c78426ff4f2bf1e12
Reviewed-on: https://go-review.googlesource.com/c/go/+/192697
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This CL extends {defer,resume}checkwidth to support nesting, which
simplifies usage.
Updates #33658.
Change-Id: Ib3ffb8a7cabfae2cbeba74e21748c228436f4726
Reviewed-on: https://go-review.googlesource.com/c/go/+/192721
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
For performance reasons (avoiding costly cross-compilations) CL 177577
changed the codegen test harness to only run the tests for the
machine's GOARCH by default.
This change updates the codegen README accordingly, explaining what
all.bash does run by default and how to perform the tests for all
architectures.
Fixes#33924
Change-Id: I43328d878c3e449ebfda46f7e69963a44a511d40
Reviewed-on: https://go-review.googlesource.com/c/go/+/192619
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
This CL eliminates unnecessary pairs of I32WrapI64 and
I64ExtendI32U generated by the WASM backend for IF
statements. And it makes the total size of pkg/js_wasm/
decreases about 490KB.
Change-Id: I16b0abb686c4e30d5624323166ec2d0ec57dbe2d
Reviewed-on: https://go-review.googlesource.com/c/go/+/191758
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Richard Musiol <neelance@gmail.com>
This CL reverts CL 192097 and fixes the issue in CL 189277.
Change-Id: Icd271262e1f5019a8e01c91f91c12c1261eeb02b
Reviewed-on: https://go-review.googlesource.com/c/go/+/192519
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Raising an out-of-bounds panic is confusing. There's no indication
that the underlying problem is a race.
The runtime already does a pretty good job of detecting this kind of
race (modification while iterating). We might as well just reorganize
a bit to avoid the out-of-bounds panic.
Fixes#33275
Change-Id: Icdd337ad2eb3c84f999db0850ec1d2ff2c146b6e
Reviewed-on: https://go-review.googlesource.com/c/go/+/191197
Reviewed-by: Martin Möhrmann <moehrmann@google.com>
- only convert literal strings if there were no syntax errors
(some of the conversion routines exit if there is an error)
- mark nodes for literals with syntax errors to avoid follow-on
errors
- don't attempt to import packages whose path had syntax errors
Fixes#32133.
Change-Id: I1803ad48c65abfecf6f48ddff1e27eded5e282c5
Reviewed-on: https://go-review.googlesource.com/c/go/+/192437
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The existing pointer comparison optimizations
don't include pointer arithmetic. Add them.
These rules trigger a few times in std cmd, while compiling:
time.Duration.String
cmd/go/internal/tlog.NodeHash
crypto/tls.ticketKeyFromBytes (3 times)
crypto/elliptic.(*p256Point).p256ScalarMult (15 times!)
crypto/elliptic.initTable
These weird comparisons occur when using the copy builtin,
which does a pointer comparison between src and dst.
This also happens to fix#32454, by optimizing enough
early on that all values can be eliminated.
Fixes#32454
Change-Id: I799d45743350bddd15a295dc1e12f8d03c11d1c6
Reviewed-on: https://go-review.googlesource.com/c/go/+/180940
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The original report in #5172 was that cmd/compile was generating bogus
follow-on error messages when typechecking a struct failed. Instead of
fixing those follow-on error messages, golang.org/cl/9614044 suppress all
follow-on error messages after struct typecheck fails. We should
continue emitting error messages instead.
While at it, also add the test case for original report.
Fixes#33947
Change-Id: I4a5c6878977128abccd704350a12df743631c7bf
Reviewed-on: https://go-review.googlesource.com/c/go/+/191944
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Complex type is the only TIDEAL that lack of support for all comparison
operators. When rewriting constant comparison into literal node, that
missing cause compiler raise an internal error.
Checking the operator is available for complex type before that fix the
problem.
We can make this check works more generally if there's more type lack of
supporting all comparison operators added, but it does not seem to be
happened, so just check explicitly for complex only.
Fixes#32723
Change-Id: I4938b1bdcbcdae9a9d87436024984bd2ab12995e
Reviewed-on: https://go-review.googlesource.com/c/go/+/183459
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
typecheck only set n.Type.Nod for declared type, and leave it nil for
anonymous types, type alias. It leads to compiler crashes, because
n.Type.Nod is nil at the time dowidth was called.
Fixing it by set n.Type.Nod right after n.Type initialization if n.Op is
OTYPE.
When embedding interface cycles involve in type alias, it also helps
pointing the error message to the position of the type alias
declaration, instead of position of embedding interface.
Fixes#31872
Change-Id: Ia18391e987036a91f42ba0c08b5506f52d07f683
Reviewed-on: https://go-review.googlesource.com/c/go/+/191540
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Testcase for a gollvm bug (assert in Llvm_backend::materializeComposite).
Updates golang/go#33020.
Change-Id: Icdf5b4b2b6eb55a5b48a31a61c41215b1ae4cf01
Reviewed-on: https://go-review.googlesource.com/c/go/+/191743
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The syntax of a shifted operation does not have a "$" sign for
the shift amount. Remove it.
Change-Id: I50782fe942b640076f48c2fafea4d3175be8ff99
Reviewed-on: https://go-review.googlesource.com/c/go/+/192100
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This will improve liveness analysis slightly, the same logic as
isdirectiface curently does. In:
type T struct {
m map[int]int
}
v := T{}
v.m = make(map[int]int)
T is considered "fat", now it is not. So assigning to v.m is considered
to clobber the entire v.
This is follow up of CL 179057.
Change-Id: Id6b4807b8e8521ef5d8bcb14fedb6dceb9dbf18c
Reviewed-on: https://go-review.googlesource.com/c/go/+/179578
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
In interface-to-concrete comparisons, we are short circuiting on the interface
value's dynamic type before evaluating the concrete expression for side effects,
causing concrete expression won't panic at runtime, while it should.
To fix it, evaluating the RHS of comparison before we do the short-circuit.
We also want to prioritize panics in the LHS over the RHS, so evaluating
the LHS too.
Fixes#32187
Change-Id: I15b58a523491b7fd1856b8fdb9ba0cba5d11ebb4
Reviewed-on: https://go-review.googlesource.com/c/go/+/178817
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Prep for subsequent CLs to remove old escape analysis pass.
This CL removes -newescape=true from tests that use it, and deletes
tests that use -newescape=false. (For history, see CL 170447.)
Notably, this removes escape_because.go without any replacement, but
this is being tracked by #31489.
Change-Id: I6f6058d58fff2c5d210cb1d2713200cc9f501ca7
Reviewed-on: https://go-review.googlesource.com/c/go/+/187617
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Extend the optimization introduced in CL 141118 to the wasm architecture.
And for reference, the rules trigger 212 times while building std and cmd
$GOOS=js GOARCH=wasm gotip build std cmd
$grep -E "Wasm.rules:44(1|2|3|4)" rulelog | wc -l
212
Updates #26498
Change-Id: I153684a2b98589ae812b42268da08b65679e09d1
Reviewed-on: https://go-review.googlesource.com/c/go/+/185477
Run-TryBot: Agniva De Sarker <agniva.quicksilver@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Richard Musiol <neelance@gmail.com>
Use the shiftIsBounded function to generate more efficient
Shift instructions.
Updates #25167
Change-Id: Id350f8462dc3a7ed3bfed0bcbea2860b8f40048a
Reviewed-on: https://go-review.googlesource.com/c/go/+/182558
Run-TryBot: Agniva De Sarker <agniva.quicksilver@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Richard Musiol <neelance@gmail.com>
This CL optimizes math.bits.TrailingZeros16 on 386 with
a pair of BSFL and ORL instrcutions.
The case TrailingZeros16-4 of the benchmark test in
math/bits shows big improvement.
name old time/op new time/op delta
TrailingZeros16-4 1.55ns ± 1% 0.87ns ± 1% -43.87% (p=0.000 n=50+49)
Change-Id: Ia899975b0e46f45dcd20223b713ed632bc32740b
Reviewed-on: https://go-review.googlesource.com/c/go/+/189277
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This CL add test cases for the unary FP negative
operation.
Change-Id: I54e7292ca9df05da0c2b113adefc97ee1e94c6e2
Reviewed-on: https://go-review.googlesource.com/c/go/+/190937
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This CL performs the branchelim optimization on WASM with its
select instruction. And the total size of pkg/js_wasm decreased
about 80KB by this optimization.
Change-Id: I868eb146120a1cac5c4609c8e9ddb07e4da8a1d9
Reviewed-on: https://go-review.googlesource.com/c/go/+/190957
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Richard Musiol <neelance@gmail.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Because the Node AST represents references to declared objects (e.g.,
variables, packages, types, constants) by directly pointing to the
referred object, we don't have use-position info for these objects.
For switch statements with duplicate cases, we report back where the
first duplicate value appeared. However, due to the AST
representation, if the value was a declared constant, we mistakenly
reported the constant declaration position as the previous case
position.
This CL reports back against the 'case' keyword's position instead, if
there's no more precise information available to us.
It also refactors code to emit the same "previous at" error message
for duplicate values in map literals.
Thanks to Emmanuel Odeke for the test case.
Fixes#33460.
Change-Id: Iec69542ccd4aad594dde8df02d1b880a422c5622
Reviewed-on: https://go-review.googlesource.com/c/go/+/188901
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The assembly output for x & c == c, where c is power of 2:
MOVQ "".set+8(SP), AX
ANDQ $8, AX
CMPQ AX, $8
SETEQ "".~r2+24(SP)
With optimization using bitset:
MOVQ "".set+8(SP), AX
BTL $3, AX
SETCS "".~r2+24(SP)
output less than 1 instruction.
However, there is no speed improvement:
name old time/op new time/op delta
AllBitSet-8 0.35ns ± 0% 0.35ns ± 0% ~ (all equal)
Fixes#31904
Change-Id: I5dca4e410bf45716ed2145e3473979ec997e35d4
Reviewed-on: https://go-review.googlesource.com/c/go/+/175957
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Array accesses with index types smaller than the machine word size may
involve a sign or zero extension of the index value before bounds
checking. Currently, this defeats prove because the facts about the
original index value don't flow through the sign/zero extension.
This CL fixes this by looking back through value-preserving sign/zero
extensions when adding facts via Update and, where appropriate, applying
the same facts using the pre-extension value. This fix is enhanced by
also looking back through value-preserving extensions within
ft.isNonNegative to infer whether the extended value is known to be
non-negative. Without this additional isNonNegative enhancement, this
logic is rendered significantly less effective by the limitation
discussed in the next paragraph.
In Update, the application of facts to pre-extension values is limited
to cases where the domain of the new fact is consistent with the type of
the pre-extension value. There may be cases where this cross-domain
passing of facts is valid, but distinguishing them from the invalid
cases is difficult for me to reason about and to implement.
Assessing which cases to allow requires details about the context and
inferences behind the fact being applied which are not available
within Update. Additional difficulty arises from the fact that the SSA
does not curently differentiate extensions added by the compiler for
indexing operations, extensions added by the compiler for implicit
conversions, or explicit extensions from the source.
Examples of some cases that would need to be filtered correctly for
cross-domain facts:
(1) A uint8 is zero-extended to int for indexing (a value-preserving
zeroExt). When, if ever, can signed domain facts learned about the int be
applied to the uint8?
(2) An int8 is sign-extended to int16 (value-preserving) for an equality
comparison. Equality comparison facts are currently always learned in both
the signed and unsigned domains. When, if ever, can the unsigned facts
learned about the int16, from the int16 != int16 comparison, be applied
to the original int8?
This is an alternative to CL 122695 and CL 174309. Compared to CL 122695,
this CL differs in that the facts added about the pre-extension value will
pass through the Update method, where additional inferences are processed
(e.g. fence-post implications, see #29964). CL 174309 is limited to bounds
checks, so is narrower in application, and makes the code harder to read.
Fixes#26292.
Fixes#29964.
Fixes#15074
Removes 238 bounds checks from std/cmd.
Change-Id: I1f87c32ee672bfb8be397b27eab7a4c2f304893f
Reviewed-on: https://go-review.googlesource.com/c/go/+/174704
Run-TryBot: Zach Jones <zachj1@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Don't skip closing parentheses of any kind after a missing
expression. They are likely part of the lexical construct
enclosing the expression.
Fixes#33386.
Change-Id: Ic0abc2037ec339a345ec357ccc724b7ad2a64c00
Reviewed-on: https://go-review.googlesource.com/c/go/+/188502
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Quietly drop duplicate methods inherited from embedded interfaces if
they have an identical signature to existing methods.
Updates #6977.
Change-Id: I144151cb7d99695f12b555c0db56207993c56284
Reviewed-on: https://go-review.googlesource.com/c/go/+/187519
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Quietly drop duplicate methods from embedded interfaces
if they have an identical signature to existing methods.
Instead of adjusting the prior syntax-based only method set
computation where methods don't have signature information
(and thus where de-duplication according to the new rules
would have been somewhat tricky to get right), this change
completely rewrites interface method set computation, taking
a page from the cmd/compiler's implementation. In a first
pass, when type-checking interfaces, explicit methods and
embedded interfaces are collected, but the interfaces are
not "expanded", that is the final method set computation
is done lazily, either when needed for method lookup, or
at the end of type-checking.
While this is a substantial rewrite, it allows us to get
rid of the separate (duplicate and delicate) syntactical
method set computation and generally simplifies checking
of interface types significantly. A few (esoteric) test
cases now have slightly different error messages but all
tests that are accepted by cmd/compile are also accepted
by go/types.
(This is a replacement for golang.org/cl/190258.)
Updates #6977.
Change-Id: Ic8b9321374ab4f617498d97c12871b69d1119735
Reviewed-on: https://go-review.googlesource.com/c/go/+/191257
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
There is real (albeit generated) code that exceeds the limit.
Fixes#33555
Change-Id: I668e85825d3d2a471970e869abe63f3492213cc1
Reviewed-on: https://go-review.googlesource.com/c/go/+/189697
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The compiler can crash if the compiled code tries to
unconditionally read from a nil pointer. This should cause
the generated binary to panic, not the compiler.
Fixes#33438
Change-Id: Ic8fa89646d6968e2cc4e27da0ad9286662f8bc49
Reviewed-on: https://go-review.googlesource.com/c/go/+/188760
Reviewed-by: Austin Clements <austin@google.com>
We shouldn't mask to desired registers if we haven't masked out all the
forbidden registers yet. In this path we haven't masked out the nospill
registers yet. If the resulting mask contains only nospill registers, then
allocReg fails.
This can only happen on resultNotInArgs-marked instructions, which exist
only on the ARM64, MIPS, MIPS64, and PPC64 ports.
Maybe there's a better way to handle resultNotInArgs instructions.
But for 1.13, this is a low-risk fix.
Fixes#33355
Change-Id: I1082f78f798d1371bde65c58cc265540480e4fa4
Reviewed-on: https://go-review.googlesource.com/c/go/+/188178
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Gccgo generates incorrect type equality functions for some types.
CL 185817 fixes it. This CL adds a test.
Updates #33062.
Change-Id: Id445c5d44a437512c65c46a029e49b7fc32e4d89
Reviewed-on: https://go-review.googlesource.com/c/go/+/185818
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Updates #33013
Change-Id: I3db062b37860bb0c6c99a553408b47cf0313531e
Reviewed-on: https://go-review.googlesource.com/c/go/+/185517
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Gccgo CL 184998 added optimizations for one- and two-case select
statements. But it didn't handle break statement in the select
case correctly. The fix is CL 185519. This CL adds a test.
Change-Id: Ide1b199f106172b41dd77c1f6e0d662fccdd8cc5
Reviewed-on: https://go-review.googlesource.com/c/go/+/185520
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For OLSH/ORSH, the right node is not a uintptr-typed. However,
unsafeValue still be called recursively for it, causing the
compiler crashes.
To fixing, the right node only needs to be evaluated
for side-effects, so just discard its value.
Fixes#32959
Change-Id: I34d5aa0823a0545f6dad1ec34774235ecf11addc
Reviewed-on: https://go-review.googlesource.com/c/go/+/185039
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Test case that causes incorrect compiler error from gccgo.
Updates #32922
Change-Id: I59432a8e8770cf03eda293f6d110c081c18fa88b
Reviewed-on: https://go-review.googlesource.com/c/go/+/184918
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This CL adds a test for gccgo bug #32901: not all the type
descriptors are registered and thus deduplicated with types
created by reflection. It needs a few levels of indirect imports
to trigger this bug.
Updates #32901.
Change-Id: Idbd89bedd63fea746769f2687f3f31c9767e5ec0
Reviewed-on: https://go-review.googlesource.com/c/go/+/184718
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Test case that caused a compiler crash in gofrontend, related to
exporting inlinable function bodies.
Updates #32778
Change-Id: Iacf1753825d5359da43e5e281189876d4c3dd3c9
Reviewed-on: https://go-review.googlesource.com/c/go/+/183851
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It ends up making two similar types, [N]uint8 of both
alg and noalg varieties. Comparsions between the two then
don't come out equal when they should.
In particular, the type *[N]uint8 has an Elem pointer which
must point to one of the above two types; it can't point to both.
Thus allocating a *[N]uint8 and dereferencing it might be a
different type than a [N]uint8.
The fix is easy. Making a small test for this is really hard. It
requires that both a argless defer and the test be imported by a
common parent package. This is why a main binary doesn't see this
issue, but a test does (as Agniva noticed), because there's a wrapper
package that imports both the test and the defer.
Types like [N]uint8 don't really need to be marked noalg anyway,
as the generated code (if any) will be shared among all
vanilla memory types of the same size.
Fixes#32595
Change-Id: If7b77fa6ed56cd4495601c3f90170682d853b82f
Reviewed-on: https://go-review.googlesource.com/c/go/+/182357
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Adjusting gofrontend error messages for GCC standards causes the
messages expected by this test to be adjusted slightly: the gofrontend
code now quotes the _ identifier.
Change-Id: I55ee2ae70b4da3bf7a421ceea80b254dd17601a9
Reviewed-on: https://go-review.googlesource.com/c/go/+/183477
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
A missing operand to mergePoint caused lower to place values
in the wrong blocks.
Includes test, belt+suspenders to do both ssa check and verify
the output (was is how the bug was originally observed).
The fixed bug here is very likely present in Go versions
1.9-1.12 on amd64 and s390x
Fixes#32680.
Change-Id: I63e702c4c40602cb795ef71b1691eb704d38ccc7
Reviewed-on: https://go-review.googlesource.com/c/go/+/183059
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
For int8, int16, and int32, comparing their unsigned value to MaxInt64
to determine non-negativity doesn't make sense, because they have
negative values whose unsigned representation is smaller than that.
Fix is simply to compare with the appropriate upper bound based on the
value type's size.
Fixes#32560.
Change-Id: Ie7afad7a56af92bd890ba5ff33c86d1df06cfd9a
Reviewed-on: https://go-review.googlesource.com/c/go/+/181797
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This reverts CL 180761
Reason for revert: Reinstate the stack-allocated defer CL.
There was nothing wrong with the CL proper, but stack allocation of defers exposed two other issues.
Issue #32477: Fix has been submitted as CL 181258.
Issue #32498: Possible fix is CL 181377 (not submitted yet).
Change-Id: I32b3365d5026600069291b068bbba6cb15295eb3
Reviewed-on: https://go-review.googlesource.com/c/go/+/181378
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The logic for detecting deferreturn calls is wrong.
We used to look for a relocation whose symbol is runtime.deferreturn
and has an offset of 0. But on some architectures, the relocation
offset is not zero. These include arm (the offset is 0xebfffffe) and
s390x (the offset is 6).
This ends up setting the deferreturn offset at 0, so we end up using
the entry point live map instead of the deferreturn live map in a
frame which defers and then segfaults.
Instead, use the IsDirectCall helper to find calls.
Fixes#32477
Update #6980
Change-Id: Iecb530a7cf6eabd7233be7d0731ffa78873f3a54
Reviewed-on: https://go-review.googlesource.com/c/go/+/181258
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Shrinks the size of things that can be stack allocated from
10M to 128k for declared variables and from 64k to 16k for
implicit allocations (new(T), &T{}, etc).
Usage: "go build -gcflags -smallframes hello.go"
An earlier GOEXPERIMENT version of this caused only one
problem, when a gc-should-detect-oversize-stack test no
longer had an oversized stack to detect. The change was
converted to a flag to make it easier to access (for
diagnosing "long" GC-related single-thread pauses) and to
remove interference with the test.
Includes test to verify behavior.
Updates #27732.
Change-Id: I1255d484331e77185e07c78389a8b594041204c2
Reviewed-on: https://go-review.googlesource.com/c/go/+/180817
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This reverts commit fff4f599fe.
Reason for revert: Seems to still have issues around GC.
Fixes#32452
Change-Id: Ibe7af629f9ad6a3d5312acd7b066123f484da7f0
Reviewed-on: https://go-review.googlesource.com/c/go/+/180761
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
When a defer is executed at most once in a function body,
we can allocate the defer record for it on the stack instead
of on the heap.
This should make defers like this (which are very common) faster.
This optimization applies to 363 out of the 370 static defer sites
in the cmd/go binary.
name old time/op new time/op delta
Defer-4 52.2ns ± 5% 36.2ns ± 3% -30.70% (p=0.000 n=10+10)
Fixes#6980
Update #14939
Change-Id: I697109dd7aeef9e97a9eeba2ef65ff53d3ee1004
Reviewed-on: https://go-review.googlesource.com/c/go/+/171758
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Normally, reflect.makeFuncStub records the context value at a known
point in the stack frame, so that the runtime can get the argument map
for reflect.makeFuncStub from that known location.
This doesn't work for defers or goroutines that haven't started yet,
because they haven't allocated a frame or run an instruction yet. The
argument map must be extracted from the context value. We already do
this for defers (the non-nil ctxt arg to getArgInfo), we just need to
do it for unstarted goroutines as well.
When we traceback a goroutine, remember the context value from
g.sched. Use it for the first frame we find.
(We never need it for deeper frames, because we normally don't stop at
the start of reflect.makeFuncStub, as it is nosplit. With this CL we
could allow makeFuncStub to no longer be nosplit.)
Fixes#25897
Change-Id: I427abf332a741a80728cdc0b8412aa8f37e7c418
Reviewed-on: https://go-review.googlesource.com/c/go/+/180258
Reviewed-by: Cherry Zhang <cherryyz@google.com>
We need to make sure that there's no possible faulting
instruction between a VarDef and that variable being
fully initialized. If there was, then anything scanning
the stack during the handling of that fault will see
a live but uninitialized variable on the stack.
If we have:
NilCheck p
VarDef x
x = *p
We can't rewrite that to
VarDef x
NilCheck p
x = *p
Particularly, even though *p faults on p==nil, we still
have to do the explicit nil check before the VarDef.
Fixes#32288
Change-Id: Ib8b88e6a5af3bf6f238ff5491ac86f53f3cf9fc9
Reviewed-on: https://go-review.googlesource.com/c/go/+/179239
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
The gccgo compiler crashes with int-to-string conversion with
large integer constant operand. CL 179777 is the fix. This CL
adds a test.
Updates #32347.
Change-Id: Id1d9dbbcdd3addca4636f1b9c5fdbc450cc48c1d
Reviewed-on: https://go-review.googlesource.com/c/go/+/179797
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL rewrites cmd/compile's package-level initialization ordering
algorithm to be compliant with the Go spec. See documentation in
initorder.go for details.
Incidentally, this CL also improves fidelity of initialization loop
diagnostics by including referenced functions in the emitted output
like go/types does.
Fixes#22326.
Change-Id: I7c9ac47ff563df4d4f700cf6195387a0f372cc7b
Reviewed-on: https://go-review.googlesource.com/c/go/+/170062
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The code in #29218 resulted in an If block containing only its control.
That block was then converted by fuseIf into a plain block;
as a result, that control value was dead.
However, the control value was still present in b.Values.
This prevented further fusing of that block.
This change beefs up the check in fuseIf to allow fusing
blocks that contain only dead values (if any).
In the case of #29218, this enables enough extra
fusing that the control value could be eliminated,
allowing all values in turn to be eliminated.
This change also fuses 34 new blocks during make.bash.
It is not clear that this fixes every variant of #29218,
but it is a reasonable standalone change.
And code like #29218 is rare and fundamentally buggy,
so we can handle new instances if/when they actually occur.
Fixes#29218
Negligible toolspeed impact.
name old time/op new time/op delta
Template 213ms ± 3% 213ms ± 2% ~ (p=0.914 n=97+88)
Unicode 89.8ms ± 2% 89.6ms ± 2% -0.22% (p=0.045 n=93+95)
GoTypes 712ms ± 3% 709ms ± 2% -0.35% (p=0.023 n=95+95)
Compiler 3.24s ± 2% 3.23s ± 2% -0.30% (p=0.020 n=98+97)
SSA 10.0s ± 1% 10.0s ± 1% ~ (p=0.382 n=98+99)
Flate 135ms ± 3% 135ms ± 2% ~ (p=0.983 n=98+98)
GoParser 158ms ± 2% 158ms ± 2% ~ (p=0.170 n=99+99)
Reflect 447ms ± 3% 447ms ± 2% ~ (p=0.538 n=98+89)
Tar 189ms ± 2% 189ms ± 3% ~ (p=0.874 n=95+96)
XML 251ms ± 2% 251ms ± 2% ~ (p=0.434 n=94+96)
[Geo mean] 427ms 426ms -0.15%
name old user-time/op new user-time/op delta
Template 264ms ± 2% 265ms ± 2% ~ (p=0.075 n=96+90)
Unicode 119ms ± 6% 119ms ± 7% ~ (p=0.864 n=99+98)
GoTypes 926ms ± 2% 924ms ± 2% ~ (p=0.071 n=94+94)
Compiler 4.38s ± 2% 4.37s ± 2% -0.34% (p=0.001 n=98+97)
SSA 13.4s ± 1% 13.4s ± 1% ~ (p=0.693 n=90+93)
Flate 162ms ± 3% 161ms ± 2% ~ (p=0.163 n=99+99)
GoParser 186ms ± 2% 186ms ± 3% ~ (p=0.130 n=96+100)
Reflect 572ms ± 3% 572ms ± 2% ~ (p=0.608 n=97+97)
Tar 239ms ± 2% 239ms ± 3% ~ (p=0.999 n=93+91)
XML 302ms ± 2% 302ms ± 2% ~ (p=0.627 n=91+97)
[Geo mean] 540ms 540ms -0.08%
file before after Δ %
asm 4862704 4858608 -4096 -0.084%
compile 24001568 24001680 +112 +0.000%
total 132520780 132516796 -3984 -0.003%
file before after Δ %
cmd/compile/internal/gc.a 8887638 8887596 -42 -0.000%
cmd/compile/internal/ssa.a 29995056 29998986 +3930 +0.013%
cmd/internal/obj/wasm.a 209444 203652 -5792 -2.765%
total 129471798 129469894 -1904 -0.001%
Change-Id: I2d18f9278e68b9766058ae8ca621e844f9d89dd8
Reviewed-on: https://go-review.googlesource.com/c/go/+/177140
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
This test was designed for #15609 and didn't consider nacl. It's not
worth adding new +build-guarded assembly files in issue15609.dir for
nacl, especially as nacl is going away.
Fixes#32206
Change-Id: Ic5bd48b4f790a1f7019100b8a72d4688df75512f
Reviewed-on: https://go-review.googlesource.com/c/go/+/178698
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently, some tests under test/fixedbugs never run:
$ for d in test/fixedbugs/*.dir; do
! test -f "${d%.dir}.go" && echo "$d"
done
test/fixedbugs/issue15071.dir
test/fixedbugs/issue15609.dir
test/fixedbugs/issue29612.dir
Because they missed the corresponding ".go" file, so "go run run.go"
will skip them.
Add missing ".go" files for those tests to make sure they will be
collected and run.
While at it, add another action "runindir", which does "go run ."
inside the t.goDirName then check the output.
Change-Id: I88000b3663a6a615d90c1cf11844ea0377403e3d
Reviewed-on: https://go-review.googlesource.com/c/go/+/177798
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
As an optimization, function literals capture variables by value when
they're not assigned and their address has not been taken. Because
result parameters are implicitly assigned through return statements
(which do not otherwise set the "assigned" flag), result parameters
are explicitly handled to always capture by reference.
However, the logic was slightly mistaken because it was only checking
if the variable in the immediately enclosing context was a return
parameter, whereas in a multiply-nested function literal it would
itself be another closure variable (PAUTOHEAP) rather than a return
parameter (PPARAMOUT).
The fix is to simply test the outermost variable, like the rest of the
if statement's tests were already doing.
Fixes#32175.
Change-Id: Ibadde033ff89a1b47584b3f56c0014d8e5a74512
Reviewed-on: https://go-review.googlesource.com/c/go/+/178541
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
First, remove the randomization of initialization order.
Then, revert to source code order instead of sorted package path order.
This restores the behavior that was in 1.12.
A larger change which will implement the suggestion in #31636 will
wait for 1.14. It's too complicated for 1.13 at this point (it has
tricky interactions with plugins).
Fixes#31636
Change-Id: I35b48e8cc21cf9f93c0973edd9193d2eac197628
Reviewed-on: https://go-review.googlesource.com/c/go/+/178297
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
typecheck type alias always replaces the original definition of the symbol.
This is wrong behavior because if the symbol's definition is replaced by a
local type alias, it ends up being written to compiled file as an alias,
instead of the original type.
To fix, only replace the definition of symbol with global type alias.
Fixes#31959
Change-Id: Id85a15e8a9d6a4b06727e655a95dc81e63df633a
Reviewed-on: https://go-review.googlesource.com/c/go/+/177378
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The test/codegen tests check all architectures
mentioned in the test file, but this requires
building at least the runtime for that architecture.
This CL changes the test to only check the local
architecture, leaving checking of other architectures
to the relevant builders, as usual.
This cuts 'go run run.go codegen' by 12r 78u 21s.
After this change, all.bash runs in ~4:40 on my laptop.
For #26473.
Change-Id: Ia0354d1aff2df2949f838528c8171410bc42dc8b
Reviewed-on: https://go-review.googlesource.com/c/go/+/177577
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The CL 164718 mistyped the comparison flags. The rules for floating
point comparison should be GreaterThanF and GreaterEqualF. Fortunately,
the wrong optimizations were overwritten by other integer rules, so the
issue won't cause failure but just some performance impact.
The fixed CL optimizes the floating point test as follows.
source code: func foo(f float64) bool { return f > 4 || f < -4}
previous version: "FCMPD", "CSET\tGT", "CBZ"
fixed version: "FCMPD", BLE"
Add the test case.
Change-Id: Iea954fdbb8272b2d642dae0f816dc77286e6e1fa
Reviewed-on: https://go-review.googlesource.com/c/go/+/177121
Reviewed-by: Ben Shi <powerman1st@163.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If a slice's entries are sparse, we decide to initialize it dynamically
instead of statically. That's CL 151319.
But if we do initialize it dynamically, we still need to initialize
the static entries. Typically we do that, but the bug fixed here is
that we don't if the entry's value is itself an array or struct.
To fix, use initKindLocalCode to ensure that both static and
dynamic entries are initialized via code.
Fixes#31987
Change-Id: I1192ffdbfb5cd50445c1206c4a3d8253295201dd
Reviewed-on: https://go-review.googlesource.com/c/go/+/176904
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
MOVBstore's value argument is a value, not a flag. We are storing
a byte so just use UInt8.
Fixes#31915.
Change-Id: Id799e5f44efc3a9c3d8480f6f25ad032c2a631bb
Reviewed-on: https://go-review.googlesource.com/c/go/+/176719
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Adjust the dummy use function to a real use. As suggested by the
println calls in the test, nilptr2.go supposes to check that a
used nil pointer dereference panics. This use function is not
real enough so an optimized compiler such as gccgo could
eliminate the call.
The spec requires that even a dummy use would cause a panic.
Unfortunately, due to #31151 this is not true for gccgo at -O1 or
above.
Change-Id: Ie07c8a5969ab94dad82d4f7cfec30597c25b7c46
Reviewed-on: https://go-review.googlesource.com/c/go/+/176579
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This change is a simple work-around to avoid a compiler crash
and provide a reasonable error message. A future change should
fix the root cause for this problem.
Fixes#23823.
Change-Id: Ifc80d9f4d35e063c378e54d5cd8d1cf4c0d2ec6a
Reviewed-on: https://go-review.googlesource.com/c/go/+/175518
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Before this CL we used to panic with "nil pointer dereference" because
the value we're calling assignTo on is the zero Value. Provide a better
error message.
Fixes#28748
Change-Id: I7dd4c9e30b599863664d91e78cc45878d8b0052e
Reviewed-on: https://go-review.googlesource.com/c/go/+/175440
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This CL adds intrinsics for the 64-bit addition and subtraction
functions in math/bits. These intrinsics use the condition code
to propagate the carry or borrow bit.
To make the carry chains more efficient I've removed the
'clobberFlags' property from most of the load and store
operations. Originally these ops did clobber flags when using
offsets that didn't fit in a signed 20-bit integer, however
that is no longer true.
As with other platforms the intrinsics are faster when executed
in a chain rather than a loop because currently we need to spill
and restore the carry bit between each loop iteration. We may
be able to reduce the need to do this on s390x (e.g. by using
compare-and-branch instructions that do not clobber flags) in the
future.
name old time/op new time/op delta
Add64 1.21ns ± 2% 2.03ns ± 2% +67.18% (p=0.000 n=7+10)
Add64multiple 2.98ns ± 3% 1.03ns ± 0% -65.39% (p=0.000 n=10+9)
Sub64 1.23ns ± 4% 2.03ns ± 1% +64.85% (p=0.000 n=10+10)
Sub64multiple 3.73ns ± 4% 1.04ns ± 1% -72.28% (p=0.000 n=10+8)
Change-Id: I913bbd5e19e6b95bef52f5bc4f14d6fe40119083
Reviewed-on: https://go-review.googlesource.com/c/go/+/174303
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
golang.org/cl/174498 add ONAME case to isStaticCompositeLiteral, to
detect global variable as compile-time constant.
It does report wrong for struct field, e.g:
o := one{i: two{i: 42}.i}
field i in two{i: 42} was reported as static composite literal, while it
should not.
In general, adding ONAME case for isStaticCompositeLiteral is probably
wrong.
Fixes#31782
Change-Id: Icde7d43bbb002b75df5c52b948b7126a4265e07b
Reviewed-on: https://go-review.googlesource.com/c/go/+/174837
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
golang.org/cl/174498 removes dynamic map entry handling in maplit, by
filtering the static entry only. It panics if it see a dynamic entry.
It relies on order to remove all dynamic entries.
But after recursively call order on the statics, some static entries
become dynamic, e.g OCONVIFACE node:
type i interface {
j()
}
type s struct{}
func (s) j() {}
type foo map[string]i
var f = foo{
"1": s{},
}
To fix it, we recursively call order on each static entry, if it changed
to dynamic, put entry to dynamic then.
Fixes#31777
Change-Id: I1004190ac8f2d1eaa4beb6beab989db74099b025
Reviewed-on: https://go-review.googlesource.com/c/go/+/174777
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This enables more of the testcases in memcombine for ppc64le,
and adds more detail to some existing.
Change-Id: Ic522a1175bed682b546909c96f9ea758f8db247c
Reviewed-on: https://go-review.googlesource.com/c/go/+/174737
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
"Division by invariant integers using multiplication" paper
by Granlund and Montgomery contains a method for directly computing
divisibility (x%c == 0 for c constant) by means of the modular inverse.
The method is further elaborated in "Hacker's Delight" by Warren Section 10-17
This general rule can compute divisibilty by one multiplication, and add
and a compare for odd divisors and an additional rotate for even divisors.
To apply the divisibility rule, we must take into account
the rules to rewrite x%c = x-((x/c)*c) and (x/c) for c constant on the first
optimization pass "opt". This complicates the matching as we want to match
only in the cases where the result of (x/c) is not also needed.
So, we must match on the expanded form of (x/c) in the expression x == c*(x/c)
in the "late opt" pass after common subexpresion elimination.
Note, that if there is an intermediate opt pass introduced in the future we
could simplify these rules by delaying the magic division rewrite to "late opt"
and matching directly on (x/c) in the intermediate opt pass.
On amd64, the divisibility check is 30-45% faster.
name old time/op new time/op delta`
DivisiblePow2constI64-4 0.83ns ± 1% 0.82ns ± 0% ~ (p=0.079 n=5+4)
DivisibleconstI64-4 2.68ns ± 1% 1.87ns ± 0% -30.33% (p=0.000 n=5+4)
DivisibleWDivconstI64-4 2.69ns ± 1% 2.71ns ± 3% ~ (p=1.000 n=5+5)
DivisiblePow2constI32-4 1.15ns ± 1% 1.15ns ± 0% ~ (p=0.238 n=5+4)
DivisibleconstI32-4 2.24ns ± 1% 1.20ns ± 0% -46.48% (p=0.016 n=5+4)
DivisibleWDivconstI32-4 2.27ns ± 1% 2.27ns ± 1% ~ (p=0.683 n=5+5)
DivisiblePow2constI16-4 0.81ns ± 1% 0.82ns ± 1% ~ (p=0.135 n=5+5)
DivisibleconstI16-4 2.11ns ± 2% 1.20ns ± 1% -42.99% (p=0.008 n=5+5)
DivisibleWDivconstI16-4 2.23ns ± 0% 2.27ns ± 2% +1.79% (p=0.029 n=4+4)
DivisiblePow2constI8-4 0.81ns ± 1% 0.81ns ± 1% ~ (p=0.286 n=5+5)
DivisibleconstI8-4 2.13ns ± 3% 1.19ns ± 1% -43.84% (p=0.008 n=5+5)
DivisibleWDivconstI8-4 2.23ns ± 1% 2.25ns ± 1% ~ (p=0.183 n=5+5)
Fixes#30282Fixes#15806
Change-Id: Id20d78263a4fdfe0509229ae4dfa2fede83fc1d0
Reviewed-on: https://go-review.googlesource.com/c/go/+/173998
Run-TryBot: Brian Kessler <brian.m.kessler@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
In the statement x = a[i], the index panic should appear to come from
the line number of the '['. Previous to this CL we sometimes used the
line number of the '=' instead.
Fixes#29504
Change-Id: Ie718fd303c1ac2aee33e88d52c9ba9bcf220dea1
Reviewed-on: https://go-review.googlesource.com/c/go/+/174617
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Any code that imports the testing package forces the testing flags to be
defined, even in non-test binaries. People work around this today by
defining a copy of the testing.TB interface just to avoid importing
testing.
Fix this by moving flag registration into a new function, testing.Init.
Delay calling Init until the testing binary begins to run, in
testing.MainStart.
Init is exported for cases where users need the testing flags to be
defined outside of a "go test" context. In particular, this may be
needed where testing.Benchmark is called outside of a test.
Fixes#21051
Change-Id: Ib7e02459e693c26ae1ba71bbae7d455a91118ee3
Reviewed-on: https://go-review.googlesource.com/c/go/+/173722
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This change creates an intrinsic for Add64 for ppc64x and adds a
testcase for it.
name old time/op new time/op delta
Add64-160 1.90ns ±40% 2.29ns ± 0% ~ (p=0.119 n=5+5)
Add64multiple-160 6.69ns ± 2% 2.45ns ± 4% -63.47% (p=0.016 n=4+5)
Change-Id: I9abe6fb023fdf62eea3c9b46a1820f60bb0a7f97
Reviewed-on: https://go-review.googlesource.com/c/go/+/173758
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Run-TryBot: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
"Division by invariant integers using multiplication" paper
by Granlund and Montgomery contains a method for directly computing
divisibility (x%c == 0 for c constant) by means of the modular inverse.
The method is further elaborated in "Hacker's Delight" by Warren Section 10-17
This general rule can compute divisibilty by one multiplication and a compare
for odd divisors and an additional rotate for even divisors.
To apply the divisibility rule, we must take into account
the rules to rewrite x%c = x-((x/c)*c) and (x/c) for c constant on the first
optimization pass "opt". This complicates the matching as we want to match
only in the cases where the result of (x/c) is not also available.
So, we must match on the expanded form of (x/c) in the expression x == c*(x/c)
in the "late opt" pass after common subexpresion elimination.
Note, that if there is an intermediate opt pass introduced in the future we
could simplify these rules by delaying the magic division rewrite to "late opt"
and matching directly on (x/c) in the intermediate opt pass.
Additional rules to lower the generic RotateLeft* ops were also applied.
On amd64, the divisibility check is 25-50% faster.
name old time/op new time/op delta
DivconstI64-4 2.08ns ± 0% 2.08ns ± 1% ~ (p=0.881 n=5+5)
DivisibleconstI64-4 2.67ns ± 0% 2.67ns ± 1% ~ (p=1.000 n=5+5)
DivisibleWDivconstI64-4 2.67ns ± 0% 2.67ns ± 0% ~ (p=0.683 n=5+5)
DivconstU64-4 2.08ns ± 1% 2.08ns ± 1% ~ (p=1.000 n=5+5)
DivisibleconstU64-4 2.77ns ± 1% 1.55ns ± 2% -43.90% (p=0.008 n=5+5)
DivisibleWDivconstU64-4 2.99ns ± 1% 2.99ns ± 1% ~ (p=1.000 n=5+5)
DivconstI32-4 1.53ns ± 2% 1.53ns ± 0% ~ (p=1.000 n=5+5)
DivisibleconstI32-4 2.23ns ± 0% 2.25ns ± 3% ~ (p=0.167 n=5+5)
DivisibleWDivconstI32-4 2.27ns ± 1% 2.27ns ± 1% ~ (p=0.429 n=5+5)
DivconstU32-4 1.78ns ± 0% 1.78ns ± 1% ~ (p=1.000 n=4+5)
DivisibleconstU32-4 2.52ns ± 2% 1.26ns ± 0% -49.96% (p=0.000 n=5+4)
DivisibleWDivconstU32-4 2.63ns ± 0% 2.85ns ±10% +8.29% (p=0.016 n=4+5)
DivconstI16-4 1.54ns ± 0% 1.54ns ± 0% ~ (p=0.333 n=4+5)
DivisibleconstI16-4 2.10ns ± 0% 2.10ns ± 1% ~ (p=0.571 n=4+5)
DivisibleWDivconstI16-4 2.22ns ± 0% 2.23ns ± 1% ~ (p=0.556 n=4+5)
DivconstU16-4 1.09ns ± 0% 1.01ns ± 1% -7.74% (p=0.000 n=4+5)
DivisibleconstU16-4 1.83ns ± 0% 1.26ns ± 0% -31.52% (p=0.008 n=5+5)
DivisibleWDivconstU16-4 1.88ns ± 0% 1.89ns ± 1% ~ (p=0.365 n=5+5)
DivconstI8-4 1.54ns ± 1% 1.54ns ± 1% ~ (p=1.000 n=5+5)
DivisibleconstI8-4 2.10ns ± 0% 2.11ns ± 0% ~ (p=0.238 n=5+4)
DivisibleWDivconstI8-4 2.22ns ± 0% 2.23ns ± 2% ~ (p=0.762 n=5+5)
DivconstU8-4 0.92ns ± 1% 0.94ns ± 1% +2.65% (p=0.008 n=5+5)
DivisibleconstU8-4 1.66ns ± 0% 1.26ns ± 1% -24.28% (p=0.008 n=5+5)
DivisibleWDivconstU8-4 1.79ns ± 0% 1.80ns ± 1% ~ (p=0.079 n=4+5)
A follow-up change will address the signed division case.
Updates #30282
Change-Id: I7e995f167179aa5c76bb10fbcbeb49c520943403
Reviewed-on: https://go-review.googlesource.com/c/go/+/168037
Run-TryBot: Brian Kessler <brian.m.kessler@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
For powers of two (c=1<<k), the divisibility check x%c == 0 can be made
just by checking the trailing zeroes via a mask x&(c-1) == 0 even for signed
integers. This avoids division fix-ups when just divisibility check is needed.
To apply this rule, we match on the fixed-up version of the division. This is
neccessary because the mod and division rewrite rules are already applied
during the initial opt pass.
The speed up on amd64 due to elimination of unneccessary fix-up code is ~55%:
name old time/op new time/op delta
DivconstI64-4 2.08ns ± 0% 2.09ns ± 1% ~ (p=0.730 n=5+5)
DivisiblePow2constI64-4 1.78ns ± 1% 0.81ns ± 1% -54.66% (p=0.008 n=5+5)
DivconstU64-4 2.08ns ± 0% 2.08ns ± 0% ~ (p=0.683 n=5+5)
DivconstI32-4 1.53ns ± 0% 1.53ns ± 1% ~ (p=0.968 n=4+5)
DivisiblePow2constI32-4 1.79ns ± 1% 0.81ns ± 1% -54.97% (p=0.008 n=5+5)
DivconstU32-4 1.78ns ± 1% 1.80ns ± 2% ~ (p=0.206 n=5+5)
DivconstI16-4 1.54ns ± 2% 1.54ns ± 0% ~ (p=0.238 n=5+4)
DivisiblePow2constI16-4 1.78ns ± 0% 0.81ns ± 1% -54.72% (p=0.000 n=4+5)
DivconstU16-4 1.00ns ± 5% 1.01ns ± 1% ~ (p=0.119 n=5+5)
DivconstI8-4 1.54ns ± 0% 1.54ns ± 2% ~ (p=0.571 n=4+5)
DivisiblePow2constI8-4 1.78ns ± 0% 0.82ns ± 8% -53.71% (p=0.008 n=5+5)
DivconstU8-4 0.93ns ± 1% 0.93ns ± 1% ~ (p=0.643 n=5+5)
A follow-up CL will address the general case of x%c == 0 for signed integers.
Updates #15806
Change-Id: Iabadbbe369b6e0998c8ce85d038ebc236142e42a
Reviewed-on: https://go-review.googlesource.com/c/go/+/173557
Run-TryBot: Brian Kessler <brian.m.kessler@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
We already skipped blank field initialization in non-global contexts.
This change makes the global context treatment match.
Fixes#31546
Change-Id: I40acce49b0a9deb351ae0da098f4c114e425ec63
Reviewed-on: https://go-review.googlesource.com/c/go/+/173723
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This pair of packages caused a crash in gollvm, due to a glitch in the
way the front end handles empty/non-name parameters for functions that
are inline candidates.
Updates #31637.
Change-Id: I571c0658a00974dd36025e571638c0c836a3cdfd
Reviewed-on: https://go-review.googlesource.com/c/go/+/173617
Run-TryBot: Benny Siegert <bsiegert@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This reverts CL 168038 (git 68819fb6d2)
Reason for revert: Doesn't work on 32 bit archs.
Change-Id: Idec9098060dc65bc2f774c5383f0477f8eb63a3d
Reviewed-on: https://go-review.googlesource.com/c/go/+/173442
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
For powers of two (c=1<<k), the divisibility check x%c == 0 can be made
just by checking the trailing zeroes via a mask x&(c-1)==0 even for signed
integers. This avoids division fixups when just divisibility check is needed.
To apply this rule the generic divisibility rule for A%B = A-(A/B*B) is disabled
on the "opt" pass, but this does not affect generated code as this rule is applied
later.
The speed up on amd64 due to elimination of unneccessary fixup code is ~55%:
name old time/op new time/op delta
DivconstI64-4 2.08ns ± 0% 2.07ns ± 0% ~ (p=0.079 n=5+5)
DivisiblePow2constI64-4 1.78ns ± 1% 0.81ns ± 1% -54.55% (p=0.008 n=5+5)
DivconstU64-4 2.08ns ± 0% 2.08ns ± 0% ~ (p=1.000 n=5+5)
DivconstI32-4 1.53ns ± 0% 1.53ns ± 0% ~ (all equal)
DivisiblePow2constI32-4 1.79ns ± 1% 0.81ns ± 4% -54.75% (p=0.008 n=5+5)
DivconstU32-4 1.78ns ± 1% 1.78ns ± 1% ~ (p=1.000 n=5+5)
DivconstI16-4 1.54ns ± 2% 1.53ns ± 0% ~ (p=0.333 n=5+4)
DivisiblePow2constI16-4 1.78ns ± 0% 0.79ns ± 1% -55.39% (p=0.000 n=4+5)
DivconstU16-4 1.00ns ± 5% 0.99ns ± 1% ~ (p=0.730 n=5+5)
DivconstI8-4 1.54ns ± 0% 1.53ns ± 0% ~ (p=0.714 n=4+5)
DivisiblePow2constI8-4 1.78ns ± 0% 0.80ns ± 0% -55.06% (p=0.000 n=5+4)
DivconstU8-4 0.93ns ± 1% 0.95ns ± 1% +1.72% (p=0.024 n=5+5)
A follow-up CL will address the general case of x%c == 0 for signed integers.
Updates #15806
Change-Id: I0d284863774b1bc8c4ce87443bbaec6103e14ef4
Reviewed-on: https://go-review.googlesource.com/c/go/+/168038
Reviewed-by: Keith Randall <khr@golang.org>
In 31618, we end up comparing the is-stmt-ness of positions
to repurpose real instructions as inline marks. If the is-stmt-ness
doesn't match, we end up not being able to remove the inline mark.
Always use statement-full positions to do the matching, so we
always find a match if there is one.
Also always use positions that are statements for inline marks.
Fixes#31618
Change-Id: Idaf39bdb32fa45238d5cd52973cadf4504f947d5
Reviewed-on: https://go-review.googlesource.com/c/go/+/173324
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Stack object generation code was always using the local package name
for its symbol. Normally that doesn't matter, as we usually only
compile functions in the local package. But for wrappers, the compiler
generates functions which live in other packages. When there are two
other packages with identical functions to wrap, the same name appears
twice, and the compiler goes boom.
Fixes#31252
Change-Id: I7026eebabe562cb159b8b6046cf656afd336ba25
Reviewed-on: https://go-review.googlesource.com/c/go/+/171464
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The special case logic for go/defer arguments in Escape.call was
scattered around a bit and was somewhat inconsistently handled across
different types of function calls and parameters. This CL pulls the
logic out into a separate callStmt method that's used uniformly for
all kinds of function calls and arguments.
Fixes#31573.
Change-Id: Icdcdf611754dc3fcf1af7cb52879fb4b73a7a31f
Reviewed-on: https://go-review.googlesource.com/c/go/+/173019
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
A check in inl.go to prevent inlining of functions calling
either getcallerpc or getcallersp does not work when these
functions are intrinsics. Swap checks to fix.
Includes test.
No bug, this was discovered in the course of a ridiculous
experiment with inlining.
Change-Id: Ie1392523bb89882d586678f2674e1a4eadc5e431
Reviewed-on: https://go-review.googlesource.com/c/go/+/172217
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Casp1 is implemented in Go on js/wasm, so escape analysis correctly
determines that the "old" parameter does not escape (which is good).
Unfortunately, test/run.go doesn't have a way to indicate that ERROR
messages are optional, and cmd/compile only emits diagnostics for "var
x int" when it's moved to the heap; not when it stays on the stack.
To accomodate that this test currently passes on some GOARCHes but not
others, rewrite the Casp1 test to use "x := new(int)" and allow both
"new(int) escapes to heap" or "new(int) does not escape".
Updates #31525.
Change-Id: I40150a7ff9042f184386ccdb2d4d428f63e8ba4f
Reviewed-on: https://go-review.googlesource.com/c/go/+/172602
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The //go:noescape directive says that arguments don't leak at all,
which is too aggressive of a claim for functions that return pointers
derived from their parameters.
Remove the directive for now. Long term fix will require a new
directive that allows more fine-grained control over escape analysis
information supplied for functions implemented in assembly.
Also, update the BAD comments in the test cases for Loadp: we really
want that *ptr leaks to the result parameter, not that *ptr leaks to
the heap.
Updates #31525.
Change-Id: Ibfa61f2b70daa7ed3223056b57eeee777eef2e31
Reviewed-on: https://go-review.googlesource.com/c/go/+/172578
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Cherry pointed out this case in review for CL 136496. That CL was
slightly too aggressive, and I likely would have made the same mistake
if I tried it myself.
Updates #27772.
Change-Id: I1fafabb9f8d9aba0494aa71333a4e17cf1bac5c8
Reviewed-on: https://go-review.googlesource.com/c/go/+/172421
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
There weren't any tests to make sure these work correctly, and this
led to escape analysis regressions in both linux/s390x and js/wasm.
The underlying issue that cmd/compile is only getting some of these
correct because escape analysis doesn't understand //go:linkname is
still present, but at least this addresses the fragility aspect.
Updates #15283.
Change-Id: I546aee1899d098b2e3de45e9b33c3ca22de485f8
Reviewed-on: https://go-review.googlesource.com/c/go/+/172420
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
In typecheckclosure, a xfunc node will be put to xtop. But that node can
be shared between multiple closures, like in a const declaration group:
const (
x = unsafe.Sizeof(func() {})
y
)
It makes a xfunc node appears multiple times in xtop, causing duplicate
initLSym run.
To fix this issue, we only do typecheck for xfunc one time, and setup
closure node earlier in typecheckclosure process.
Fixes#30709
Change-Id: Ic924a157ee9f3e5d776214bef5390849ddc8aab9
Reviewed-on: https://go-review.googlesource.com/c/go/+/172298
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The new escape analysis implementation tries to emit debugging
diagnostics that are compatible with the existing implementation, but
there's a handful of cases that are easier to handle by updating the
test expectations instead.
For regress tests that need updating, the original file is copied to
oldescapeXXX.go.go with -newescape=false added to the //errorcheck
line, while the file is updated in place with -newescape=true and new
test requirements.
Notable test changes:
1) escape_because.go looks for a lot of detailed internal debugging
messages that are fairly particular to how esc.go works and that I
haven't attempted to port over to escape.go yet.
2) There are a lot of "leaking param: x to result ~r1 level=-1"
messages for code like
func(p *int) *T { return &T{p} }
that were simply wrong. Here &T must be heap allocated unconditionally
(because it's being returned); and since p is stored into it, p
escapes unconditionally too. esc.go incorrectly reports that p escapes
conditionally only if the returned pointer escaped.
3) esc.go used to print each "leaking param" analysis result as it
discovered them, which could lead to redundant messages (e.g., that a
param leaks at level=0 and level=1). escape.go instead prints
everything at the end, once it knows the shortest path to each sink.
4) esc.go didn't precisely model direct-interface types, resulting in
some values unnecessarily escaping to the heap when stored into
non-escaping interface values.
5) For functions written in assembly, esc.go only printed "does not
escape" messages, whereas escape.go prints "does not escape" or
"leaking param" as appropriate, consistent with the behavior for
functions written in Go.
6) 12 tests included "BAD" annotations identifying cases where esc.go
was unnecessarily heap allocating something. These are all fixed by
escape.go.
Updates #23109.
Change-Id: Iabc9eb14c94c9cadde3b183478d1fd54f013502f
Reviewed-on: https://go-review.googlesource.com/c/go/+/170447
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
For a failed interface conversion not in ",ok" form, getitab
calls itab.init to get the name of the missing method for the
panic message. itab.init will try to find the methods, populate
the method table as it goes. When some method is missing, it sets
itab.fun[0] to 0 before return. There is a small window that
itab.fun[0] could be non-zero.
If concurrently, another goroutine tries to do the same interface
conversion, it will read the same itab's fun[0]. If this happens
in the small window, it sees a non-zero fun[0] and thinks the
conversion succeeded, which is bad.
Fix the race by setting fun[0] to non-zero only when we know the
conversion succeeds. While here, also simplify the syntax
slightly.
Fixes#31419.
Change-Id: Ied34d3043079eb933e330c5877b85e13f98f1916
Reviewed-on: https://go-review.googlesource.com/c/go/+/171759
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
These new calls should not prevent NOSPLIT promotion, like the old ones.
These new calls should not prevent racefuncenter/exit removal.
(The latter was already true, as the new calls are not yet lowered
to StaticCalls at the point where racefuncenter/exit removal is done.)
Add tests to make sure we don't regress (again).
Fixes#31219
Change-Id: I3fb6b17cdd32c425829f1e2498defa813a5a9ace
Reviewed-on: https://go-review.googlesource.com/c/go/+/170639
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
Some var declarations return "extra expression" or "missing expression"
errors when they should return “assignment mismatch” instead. Change
the returned error messages to exhibit the desired behavior.
Fixes#30085.
Change-Id: I7189355fbb0f976d70100779db4f81a9ae64fb11
Reviewed-on: https://go-review.googlesource.com/c/go/+/161558
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
"leaking closure reference" is redundant for similar reasons as "&x
escapes to heap" for OADDR nodes: the reference itself does not
allocate, and we already report when the referenced variable is moved
to heap.
"mark escaped content" is redundant with "leaking param content".
Updates #23109.
Change-Id: I1ab599cb1e8434f1918dd80596a70cba7dc8a0cf
Reviewed-on: https://go-review.googlesource.com/c/go/+/170321
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
For most nodes (e.g., OPTRLIT, OMAKESLICE, OCONVIFACE), escape
analysis prints "escapes to heap" or "does not escape" to indicate
whether that node's allocation can be heap or stack allocated.
These messages are also emitted for OADDR, even though OADDR does not
actually allocate anything itself. Moreover, it's redundant because
escape analysis already prints "moved to heap" diagnostics when an
OADDR node like "&x" causes x to require heap allocation.
Because OADDR nodes don't allocate memory, my escape analysis rewrite
doesn't naturally emit the "escapes to heap" / "does not escape"
diagnostics for them. It's also non-trivial to replicate the exact
semantics esc.go uses for OADDR.
Since there are so many of these messages, I'm disabling them in this
CL by themselves. I modified esc.go to suppress the Warnl calls
without any other behavior changes, and then used a shell script to
automatically remove any ERROR messages mentioned by run.go in
"missing error" or "no match for" lines.
Fixes#16300.
Updates #23109.
Change-Id: I3993e2743c3ff83ccd0893f4e73b366ff8871a57
Reviewed-on: https://go-review.googlesource.com/c/go/+/170319
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
The bug in 29612 is that there are two similar-looking anonymous interface
types in two different packages, ./p1/ssa and ./p2/ssa:
v.(interface{ foo() }).foo()
These types should be treated differently because the unexported method
makes the types different (according to the spec).
But when generating the type descriptors for those two types, they
both have the name "interface { ssa.foo() }". They thus get the same
symbol, and the linker happily unifies them. It picks an arbitrary one
for the runtime to use, but that breaks conversions from concrete types
that have a foo method from the package which had its interface type
overwritten.
We need to encode the metadata symbol for unexported methods as package
path qualified (The same as we did in CL 27791 for struct fields).
So switching from FmtUnsigned to Fmtleft by default fixes the issue.
In case of generating namedata, FmtUnsigned is used.
The benchmark result ends up in no significant change of compiled binary
compare to the immediate parent.
Fixes#29612
Change-Id: I775aff91ae4a1bb16eb18a48d55e3b606f3f3352
Reviewed-on: https://go-review.googlesource.com/c/go/+/170157
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
When branching at a bounds check for indexing or slicing ops, prove currently
only learns from the upper bound. On the positive branch, we currently learn
i < len(a) (or i <= len(a)) in both the signed and unsigned domains.
This CL makes prove also learn from the lower bound. Specifically, on the
positive branch from index or slicing ops, prove will now ALSO learn i >= 0 in
the signed domain (this fact is of no value in the unsigned domain).
The substantive change itself is only an additional call to addRestrictions,
though I've also inverted the nested switch statements around that call for the
sake of clarity.
This CL removes 92 bounds checks from std and cmd. It passes all tests and
shows no deltas on compilecmp.
Fixes#28885
Change-Id: I13eccc36e640eb599fa6dc5aa3be3c7d7abd2d9e
Reviewed-on: https://go-review.googlesource.com/c/go/+/170121
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Would suggest extending capabilities (32-bit, unsigned, etc)
in separate CLs because prove bugs are so mystifying.
This implements the suggestion in this comment
https://go-review.googlesource.com/c/go/+/104041/10/src/cmd/compile/internal/ssa/loopbce.go#164
for inferring properly bounded iteration for loops of the form
for i := K0; i < KNN-(K-1); i += K
for i := K0; i <= KNN-K; i += K
Where KNN is "known non negative" (i.e., len or cap) and K
is also not negative. Because i <= KNN-K, i+K <= KNN and
no overflow occurs.
Also handles decreasing case (K1 > 0)
for i := KNN; i >= K0; i -= K1
which works when MININT+K1 < K0
(i.e. MININT < K0-K1, no overflow)
Signed only, also only 64 bit for now.
Change-Id: I5da6015aba2f781ec76c4ad59c9c48d952325fdc
Reviewed-on: https://go-review.googlesource.com/c/go/+/136375
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alexandru Moșoi <alexandru@mosoi.ro>
Prove currently fails to remove bounds checks of the form:
if i >= 0 { // hint that i is non-negative
for i < len(data) { // i becomes Phi in the loop SSA
_ = data[i] // data[Phi]; bounds check!!
i++
}
}
addIndVarRestrictions fails to identify that the loop induction
variable, (Phi), is non-negative. As a result, the restrictions,
i <= Phi < len(data), are only added for the signed domain. When
testing the bounds check, addBranchRestrictions is similarly unable
to infer that Phi is non-negative. As a result, the restriction,
Phi >= len(data), is only added/tested for the unsigned domain.
This CL changes the isNonNegative method to utilise the factTable's
partially ordered set (poset). It also adds field factTable.zero to
allow isNonNegative to query the poset using the zero(0) constant
found or created early in prove.
Fixes#28956
Change-Id: I792f886c652eeaa339b0d57d5faefbf5922fe44f
Reviewed-on: https://go-review.googlesource.com/c/go/+/161437
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Typechecking treats all untyped numbers as integers for the purposes
of validating operators. However, when I refactoring constant
operation evalution in golang.org/cl/139901, I mistakenly interpreted
that the only invalid case that needed to be preserved was % (modulo)
on floating-point values.
This CL restores the other remaining cases that were dropped from that
CL. It also uses the phrasing "invalid operation" instead of "illegal
constant expression" for better consistency with the rest of
cmd/compile and with go/types.
Lastly, this CL extends setconst to recognize failed constant folding
(e.g., division by zero) so that we can properly mark those
expressions as broken rather than continuing forward with bogus values
that might lead to further spurious errors.
Fixes#31060.
Change-Id: I1ab6491371925e22bc8b95649f1a0eed010abca6
Reviewed-on: https://go-review.googlesource.com/c/go/+/169719
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Update the issue 30908 test to work with the no-opt builder
(this requires a corresponding change in the linker as well).
As part of this change, 'rundir' tests are now linked without
passing "-w" to the linker.
Updates #30908.
Fixes#31034.
Change-Id: Ic776e1607075c295e409e1c8230aaf55a79a6323
Reviewed-on: https://go-review.googlesource.com/c/go/+/169161
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 135377 introduces pass strings and slices to convT2{E,I} by value.
Before that CL, all types, except interface will be allocated temporary
address. The CL changes the logic that only constant and type which
needs address (determine by convFuncName) will be allocated.
It fails to cover the case where type is static composite literal.
Adding condition to check that case fixes the issue.
Also, static composite literal node implies constant type, so consttype
checking can be removed.
Fixes#30956
Change-Id: Ifc750a029fb4889c2d06e73e44bf85e6ef4ce881
Reviewed-on: https://go-review.googlesource.com/c/go/+/168858
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Some special-case code paths in order.go didn't expect OCALLFUNC to
have Ninit; in particular, OAS2FUNC and ODEFER/OGO failed to call
o.init on their child OCALLFUNC node. This resulted in not all of the
AST being properly ordered.
This was noticed because order is responsible for introducing an
invariant around how OAPPEND is used, which is enforced by walk.
However, there were perhaps simpler cases (e.g., simple order of
evaluation) that were being silently miscompiled.
Fixes#31010.
Change-Id: Ib928890ab5ec2aebd8e30a030bc2b404387f9123
Reviewed-on: https://go-review.googlesource.com/c/go/+/169257
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
New test case designed to mimic the code in issue 30908, which
features duplicate but non-indentical DWARF abstract subprogram DIEs.
Updates #30908.
Change-Id: Iacb4b53e6a988e46c801cdac236cef883c553f8f
Reviewed-on: https://go-review.googlesource.com/c/go/+/168957
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
For "rundir" tests, allow users to add in linker flags as well as
compiler flags, e.g.
// rundir -m -ldflags -w
The directive above will pass "-m" to the compiler on each package compilation
and "-w" to the linker for the final link.
In addition, if "-P" is specified with 'rundir', then for each compile
pass in "-p <X>" to set the packagepath explicitly, which is closer to
how the compiler is run by 'go build'.
Change-Id: I04720011a89d1bd8dcb4f2ccb4af1d74f6a01da1
Reviewed-on: https://go-review.googlesource.com/c/go/+/168977
Reviewed-by: Cherry Zhang <cherryyz@google.com>
It is possible that a "volatile" value (one that can be clobbered
by preparing args of a call) to be used in multiple write barrier
calls. We used to copy the volatile value right before each call.
But this doesn't work if the value is used the second time, after
the first call where it is already clobbered. Copy it before
emitting any call.
Fixes#30977.
Change-Id: Iedcc91ad848d5ded547bf37a8359c125d32e994c
Reviewed-on: https://go-review.googlesource.com/c/go/+/168677
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This CL instrinsifies Add64 with arm64 instruction sequence ADDS, ADCS
and ADC, and optimzes the case of carry chains.The CL also changes the
test code so that the intrinsic implementation can be tested.
Benchmarks:
name old time/op new time/op delta
Add-224 2.500000ns +- 0% 2.090000ns +- 4% -16.40% (p=0.000 n=9+10)
Add32-224 2.500000ns +- 0% 2.500000ns +- 0% ~ (all equal)
Add64-224 2.500000ns +- 0% 1.577778ns +- 2% -36.89% (p=0.000 n=10+9)
Add64multiple-224 6.000000ns +- 0% 2.000000ns +- 0% -66.67% (p=0.000 n=10+10)
Change-Id: I6ee91c9a85c16cc72ade5fd94868c579f16c7615
Reviewed-on: https://go-review.googlesource.com/c/go/+/159017
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
'SUBQ $-0x80, r' is shorter to encode than 'ADDQ $0x80, r',
and functionally equivalent. Use it instead.
Shaves off a few bytes here and there:
file before after Δ %
compile 25935856 25927664 -8192 -0.032%
nm 4251840 4247744 -4096 -0.096%
Change-Id: Ia9e02ea38cbded6a52a613b92e3a914f878d931e
Reviewed-on: https://go-review.googlesource.com/c/go/+/168344
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When initializing a new object, we're often writing
1) to a location that doesn't have a pointer to a heap object
2) a pointer that doesn't point to a heap object
When both those conditions are true, we can avoid the write barrier.
This CL detects case 1 by looking for writes to known-zeroed
locations. The results of runtime.newobject are zeroed, and we
perform a simple tracking of which parts of that object are written so
we can determine what part remains zero at each write.
This CL detects case 2 by looking for addresses of globals (including
the types and itabs which are used in interfaces) and for nil pointers.
Makes cmd/go 0.3% smaller. Some particular cases, like the slice
literal in #29573, can get much smaller.
TODO: we can remove actual zero writes also with this mechanism.
Update #29573
Change-Id: Ie74a3533775ea88da0495ba02458391e5db26cb9
Reviewed-on: https://go-review.googlesource.com/c/go/+/156363
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The name change init -> init.ializers was initially required for
initialization code.
With CL 161337 there's no wrapper code any more, there's a data
structure instead (named .inittask). So we can go back to just
plain init appearing in tracebacks.
RELNOTE=yes
Update #29919. Followon to CL 161337.
Change-Id: I5a4a49d286df24b53b2baa193dfda482f3ea82a5
Reviewed-on: https://go-review.googlesource.com/c/go/+/167780
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Instead of writing an init function per package that does the same
thing for every package, just write that implementation once in the
runtime. Change the compiler to generate a data structure that encodes
the required initialization operations.
Reduces cmd/go binary size by 0.3%+. Most of the init code is gone,
including all the corresponding stack map info. The .inittask
structures that replace them are quite a bit smaller.
Most usefully to me, there is no longer an init function in every -S output.
(There is an .inittask global there, but it's much less distracting.)
After this CL we could change the name of the "init.ializers" function
back to just "init".
Update #6853
R=go1.13
Change-Id: Iec82b205cc52fe3ade4d36406933c97dbc9c01b1
Reviewed-on: https://go-review.googlesource.com/c/go/+/161337
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
golang.org/cl/166983 started serializing the Ninit field of OCALL
nodes within function inline bodies (necessary to fix a regression in
building crypto/ecdsa with -gcflags=-l=4), but this means the Ninit
field needs to be typechecked when the imported function body is used.
It's unclear why this wasn't necessary for the crypto/ecdsa
regression.
Fixes#30907.
Change-Id: Id5f0bf3c4d17bbd6d5318913b859093c93a0a20c
Reviewed-on: https://go-review.googlesource.com/c/go/+/168199
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
A few examples (for accessing a slice of length 3):
s[-1] runtime error: index out of range [-1]
s[3] runtime error: index out of range [3] with length 3
s[-1:0] runtime error: slice bounds out of range [-1:]
s[3:0] runtime error: slice bounds out of range [3:0]
s[3:-1] runtime error: slice bounds out of range [:-1]
s[3:4] runtime error: slice bounds out of range [:4] with capacity 3
s[0:3:4] runtime error: slice bounds out of range [::4] with capacity 3
Note that in cases where there are multiple things wrong with the
indexes (e.g. s[3:-1]), we report one of those errors kind of
arbitrarily, currently the rightmost one.
An exhaustive set of examples is in issue30116[u].out in the CL.
The message text has the same prefix as the old message text. That
leads to slightly awkward phrasing but hopefully minimizes the chance
that code depending on the error text will break.
Increases the size of the go binary by 0.5% (amd64). The panic functions
take arguments in registers in order to keep the size of the compiled code
as small as possible.
Fixes#30116
Change-Id: Idb99a827b7888822ca34c240eca87b7e44a04fdd
Reviewed-on: https://go-review.googlesource.com/c/go/+/161477
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This is a re-attempt at CL 153841, which caused two regressions:
1. crypto/ecdsa failed to build with -gcflags=-l=4. This was because
when "t1, t2, ... := g(); f(t1, t2, ...)" was exported, we were losing
the first assignment from the call's Ninit field.
2. net/http/pprof failed to run with -gcflags=-N. This is due to a
conflict with CL 159717: as of that CL, package-scope initialization
statements are executed within the "init.ializer" function, rather
than the "init" function, and the generated temp variables need to be
moved accordingly too.
[Rest of description is as before.]
This CL moves order.go's copyRet logic for rewriting f(g()) into t1,
t2, ... := g(); f(t1, t2, ...) earlier into typecheck. This allows the
rest of the compiler to stop worrying about multi-value functions
appearing outside of OAS2FUNC nodes.
This changes compiler behavior in a few observable ways:
1. Typechecking error messages for builtin functions now use general
case error messages rather than unnecessarily differing ones.
2. Because f(g()) is rewritten before inlining, saved inline bodies
now see the rewritten form too. This could be addressed, but doesn't
seem worthwhile.
3. Most notably, this simplifies escape analysis and fixes a memory
corruption issue in esc.go. See #29197 for details.
Fixes#15992.
Fixes#29197.
Change-Id: I930b10f7e27af68a0944d6c9bfc8707c3fab27a4
Reviewed-on: https://go-review.googlesource.com/c/go/+/166983
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
We know that a & 31 is non-negative for all a, signed or not.
We can avoid checking that and needing to write out an
unreachable call to panicshift.
Change-Id: I32f32fb2c950d2b2b35ac5c0e99b7b2dbd47f917
Reviewed-on: https://go-review.googlesource.com/c/go/+/167499
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
The only ways to construct an OLITERAL node are (1) a basic literal
from the source package, (2) constant folding within evconst (which
only folds Go language constants), (3) the universal "nil" constant,
and (4) implicit conversions of nil to some concrete type.
Passes toolstash-check.
Change-Id: I30fc6b07ebede7adbdfa4ed562436cbb7078a2ff
Reviewed-on: https://go-review.googlesource.com/c/go/+/166981
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
ppc64{,le} processor level selection allows the compiler to generate instructions
targeting newer processors and processor-specific optimizations without breaking
compatibility with our current baseline. This feature introduces a new environment
variable, GOPPC64.
GOPPC64 is a GOARCH=ppc64{,le} specific option, for a choice between different
processor levels (i.e. Instruction Set Architecture versions) for which the
compiler will target. The default is 'power8'.
Change-Id: Ic152e283ae1c47084ece4346fa002a3eabb3bb9e
Reviewed-on: https://go-review.googlesource.com/c/go/+/163758
Run-TryBot: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This test invokes 'go build', so in module mode it needs a module
cache to guard edits to go.mod.
Fixes#30776
Change-Id: I89ebef1fad718247e7f972cd830e31d6f4a83e4c
Reviewed-on: https://go-review.googlesource.com/c/go/+/167085
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The CL 164718 adds new condition flags for floating-point comparisons
in arm64 backend, but dose not add the handling in rewrite.go for
corresponding Ops, which causes issue 30679. And this CL fixes this
issue.
Fixes#30679
Change-Id: I8acc749f78227c3e9e74fa7938f05fb442fb62c6
Reviewed-on: https://go-review.googlesource.com/c/go/+/166579
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
New test for issue 30659 (compilation error due to bad
export data).
Updates #30659.
Change-Id: I2541ee3c379e5b22033fea66bb4ebaf720cc5e1f
Reviewed-on: https://go-review.googlesource.com/c/go/+/166917
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Two tests (load_le_byte8_uint64_inv and load_be_byte8_uint64)
pass but the generated code isn't actually correct.
The test regexp provides a false negative, as it matches the
MOVQ (SP), BP instruction in the epilogue.
Combined loads never worked for these cases - the test was added in error
as part of a batch and not noticed because of the above false match.
Normalize the amd64/386 tests to always negative match on narrower
loads and OR.
Change-Id: I256861924774d39db0e65723866c81df5ab5076f
Reviewed-on: https://go-review.googlesource.com/c/go/+/166837
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Using Once.Do is now extremely cheap because the fast path is just an inlined
atomic load of a variable that is written only once and a conditional jump.
This is very beneficial for Once.Do because, due to its nature, the fast path
will be used for every call after the first one.
In a attempt to mimize code size increase, reorder the fields so that the
pointer to Once is also the pointer to Once.done, that is the only field used
in the hot path. This allows to use more compact instruction encodings or less
instructions in the hot path (that is inlined at every callsite).
name old time/op new time/op delta
Once 4.54ns ± 0% 2.06ns ± 0% -54.59% (p=0.000 n=19+16)
Once-4 1.18ns ± 0% 0.55ns ± 0% -53.39% (p=0.000 n=15+16)
Once-16 0.53ns ± 0% 0.17ns ± 0% -67.92% (p=0.000 n=18+17)
linux/amd64 bin/go 14675861 (previous commit 14663387, +12474/+0.09%)
Change-Id: Ie2708103ab473787875d66746d2f20f1d90a6916
Reviewed-on: https://go-review.googlesource.com/c/go/+/152697
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Turns out this makes the fix for 28797 unnecessary, because this order
ensures that the RHS of IsSliceInBounds ops are always nonnegative.
The real reason for this change is that it also makes dealing with
<0 values easier for reporting values in bounds check panics (issue #30116).
Makes cmd/go negligibly smaller.
Update #28797
Change-Id: I1f25ba6d2b3b3d4a72df3105828aa0a4b629ce85
Reviewed-on: https://go-review.googlesource.com/c/go/+/166377
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Current compiler reverses operands to work around NaN in
"less than" and "less equal than" comparisons. But if we
want to use "FCMPD/FCMPS $(0.0), Fn" to do some optimization,
the workaround way does not work. Because assembler does
not support instruction "FCMPD/FCMPS Fn, $(0.0)".
This CL sets condition flags for floating-point comparisons
to resolve this problem.
Change-Id: Ia48076a1da95da64596d6e68304018cb301ebe33
Reviewed-on: https://go-review.googlesource.com/c/go/+/164718
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
