Finding implementations of an interface should not give the interface itself
as an implementation.
Fixes#35601
Change-Id: Id3352619ece90fb7ca906ddabca613742d156c76
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208667
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Expose ImportPathToAssumedName (internally) and use it in an LSP
completion case that doesn't go through the usual imports code.
Fixesgolang/go#35401.
Change-Id: If87912072e11e22c542f7474841e53467a33ef2b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/206890
Run-TryBot: Heschi Kreinick <heschi@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The early return logic for didOpen events in
(*snapshot).invalidateContent was preventing the creation of a new
snapshot, which was in turn stopping the versions from being updated.
This exposed a fundamental issue in the way we were calculating
workspace diagnostics. Since we weren't waiting for diagnostics to be
completed for an entire snapshot before replying that the server had
been initialized, snapshots were being cloned without any type
information. For quickfix code actions, we assume that we have all
information cached (since we need to have sent the diagnostics that the
quickfix is mapped to), so we were not finding the cached analysis
results.
To handle this in the short-term, we key analyses by their names, and
then regenerate results as-needed for code actions. This is technically
more correct than simply assuming that we have the analyses cached. In a
follow-up CL, I will send a follow-up that will make sure that
snapshots "wait" on each other to be fully constructed before being
cloned.
Change-Id: Ie89fcdb438b6b8b675f87335561bf47b768641ac
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208265
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
When packages.Load'ing cgo packages, the authored files show up in
GoFiles, and the generated files show up in CompiledGoFiles. We need the
AST and type information for the latter, since they're the only thing we
can type check. But we also need the contents (and column mapper) for
the authored file so that we can navigate into it.
Store GoFiles in package metadata and checked Packages. Parse the extra
files, just for their mappers. Refactor the View functions a little bit,
since there's only one place that actually needs to find the mapper for
a file.
Updates golang/go#35720.
Change-Id: I9f96872a9a592bf0e11da27ebd8976c6db8752c9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208502
Run-TryBot: Heschi Kreinick <heschi@google.com>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
When //line directives are in play, the ast.File's Offset function will
return offsets in the generated file. We want offsets in the authored
file, so we need to pass a Converter for the authored file, in addition
to the ast.File for the generated file. For the same reason, we have to
start (Range).Span() by translating into positions in the authored file,
then calculate offsets from that.
A lot of call sites outside of the LSP don't pass the Converter, but
they probably don't matter much. I think everything inside does because
it ends up using mappedRange.
Updates golang/go#35720.
Change-Id: I7be09b3a50720b078e862d48cfdb02208f8187ae
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208501
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
In cases like:
var foo []bytes.Buffer
foo = append(foo, <>)
you will now get a literal candidate "bytes.Buffer{}". Previously we
were skipping all literal candidates at the variadic position, but the
intention was to only skip literal slice candidates (i.e.
"[]bytes.Buffer{}" in the above example).
I also improved the literal struct snippet to not leave the cursor
inside the curlies when the struct type has no accessible fields.
Previously it was only checking if the struct had no fields at all.
This means after completing in the above example you will end up with
"bytes.Buffer{}<>" instead of "bytes.Buffer{<>}", where "<>" denotes
the cursor.
Change-Id: Ic2604a4ea65d84ad855ad6e6d98b8ab76eb08d77
Reviewed-on: https://go-review.googlesource.com/c/tools/+/207537
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Type aliases don't work well with types.TypeString. Work around that by
using the AST to build this information. Follow up from CL 201677.
Fixesgolang/go#33500
Change-Id: I8b2d4ea238eb5d284a419f2b0bbf9655e69d434d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208497
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
I'm not sure why this was being managed by the view, but delete the code
that handles tracking a file's first change. It is only used to avoid
spamming the user with error messages.
Change-Id: Id95089478ffb7e189d38cbc147e3dde6a1c55c5e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208274
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change modifies the behavior of the GetReverseDependencies function
used for diagnostics. Since we now return diagnostics for the entire
workspace, we don't have to worry if a file is open to show errors in
it. This change requires the addition of a new (*snapshot).PackageHandle
function that gets a CheckPackageHandle for a given package ID. This
function does not cause a re-load of the package metadata, though if we
feel that this is something we need in the future we can add it.
Change-Id: I863bdf284d15f2317d8fae395928a90b9455146b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208102
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Since diagnostics are published with the URI separately, there's no need
for us to keep the FileIdentity around in two places.
Change-Id: I5724b9582e5eee49f66fcf9f08625f14a69e3fc0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208263
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
When the cursor is on a "for" statement or on any branch statement inside
the for loop. It will highlight the control flow inside the for loop.
Updates #34496
Change-Id: Idef14e3c89bc161d305d4a49fd784095a93bbc03
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208337
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change uses the FileIdentity when reporting an error message, so
that the version number can be propagated to through the
publishDiagnostics notification.
Change-Id: I6a2103e304717ca09895008ea40336e3ace3c66d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208260
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change cleans up internal/lsp/source/view.go to have a more logical
ordering and deletes the view.CheckPackageHandle function. Now, the only
way to get a CheckPackageHandle is through a snapshot (so all of the
corresponding edits).
Also, renamed fuzzy tests to fuzzymatch. Noticed this weird error when
debugging - I had golang.org/x/tools/internal/lsp/fuzzy in my module
cache and it conflicted with the test version.
Change-Id: Ib87836796a8e76e6b6ed1306c2a93e9a5db91cce
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208099
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
As we improve support for cgo we'll need to reference GoFiles, not just
CompiledGoFiles. "Files" is right out.
I think I got everything that needs renaming but please let me know if
not.
Updates golang/go#35720.
Change-Id: I97a6ebf5b395535de0d5f4f8b3f84b46ca34643f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208101
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
None of the godef tests were running due to a mistake in the test
harness code. Fix them and re-enable.
We decided that the range for an import statement should be the whole
import path, not just the first character, so make that change and
adjust the PrepareRename tests accordingly.
Change-Id: I45756a78f2a1beb3c5180b5f288ce078075624bf
Reviewed-on: https://go-review.googlesource.com/c/tools/+/207900
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Modified the way highlights are tested to allow for author to explicitly
mark the matches. Also added highlighting for fields and methods. Used
type checking in addition to ast to get better matching. Worked with
@stamblerre
Updates #34496
Change-Id: I462703e0011c4e0a4b98016e9c25af9bf1ead0b9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/207899
Run-TryBot: Rohan Challa <rohan@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change runs diagnostics on all packages in the workspace, instead
of just open files. We also want to avoid invalidating the type
information for a newly-opened file (since we should have it be default
now), so handle that case.
This causes a large increase in memory usage in the
internal/lsp/cmd tests, so to handle that, share an app between all of
the tests, rather than creating one per-test type.
Change-Id: Ifba18d77a700cda79ec79f66174de0e7f13fe319
Reviewed-on: https://go-review.googlesource.com/c/tools/+/207353
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Code generation has been unified, so that tsprotocol.go and tsserver.go
are produced by the same program. tsprotocol.go is about 900 lines shorter,
partly from removing boilerplate comments that golint no longer requires.
(And partly by generating fewer unneeded types.)
The choice made for a union type is commented with the set of types. There
is no Go equivalent for union types, but making themn all interface{}
would replace type checking at unmarshalling with checking runtime
conversions.
Intersection types (A&B) are sometimes embedded (struct{A;B;}, and
sometimes expanded, as they have to be if A and B have fields with the
same names.
There are fewer embedded structs, which had been verbose and confusing to
initialize. They have been replaced by types whose names end in Gn.
Essentially all the generated *structs have been removed. This makes
no difference in what the client sends, and the server may send a {}
where it previously might have sent nothing. The benefit is that some
nil tests can be removed. Thus 'omitempty' in json tags is just
documentation that the element is optional in the protocol.
The files that generate this code will be submitted later, but soon.
Change-Id: I52b997d9c58de3d733fc8c6ce061e47ce2bdb100
Reviewed-on: https://go-review.googlesource.com/c/tools/+/207598
Run-TryBot: Peter Weinberger <pjw@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
In cases like:
var foo []io.Writer
var buf *bytes.Buffer
foo = append(foo, <>)
we weren't giving "buf" a good score. When comparing the candidate
type *bytes.Buffer to the (variadic) expected type []io.Writer we were
turning the candidate type into []*bytes.Buffer. However, of course,
[]*bytes.Buffer is not assignable to []io.Writer, so the types didn't
match. Now we instead turn the expected type []io.Writer into
io.Writer and compare to *bytes.Buffer.
I fixed the @rank test note to check that the candidates' scores are
strictly decreasing. Previously it would allow candidates with the
same score if they happened to be in the right order. This made it
easier to right a test for this issue, but also uncovered an issue
with untyped completion logic. I fixed it to do the untyped constant
check if _either_ the expected or candidate type is
untyped (previously it required the candidate type to be untyped).
Fixesgolang/go#35625.
Change-Id: I9a837d6a781669cb7a2f1d6d3d7f360c85be49eb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/207518
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Rather than panicking when we have not created any views for the packages,
we should show a reasonable error to the user. This change propagates the
errors to the user.
Updates golang/go#35599
Change-Id: I49789d8ce18e154f111bc3584488f468a129e30c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/207344
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
go/parser.ParseFile can return both an AST and errors. We should still
be able to do import organization even if the AST contains errors, as
long as they are below the portion of the file that contains the import
block.
Change-Id: Id6b86171fca3e15d02910d1c6f4ce25e803754d0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/207261
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
When looking for references, look in the entire workspace rather than
the same package. This makes the references query more expensive because
it needs to look at every package in the workspace, but hopefully
it shouln't be user-noticable. This can be made more efficient by only
checking packages that are transitive reverse dependencies. I don't think a
mechanism to get all transitive reverse dependencies exists yet.
One of the references test have been changed: it looked up references
of the builtin int type, but now there are so many refererences that
the test too slow and doesn't make sense any more. Instead look up
references of the type "i" in that file.
Change-Id: I93b3bd3795386f06ce488e76e6c7c8c1b1074e22
Reviewed-on: https://go-review.googlesource.com/c/tools/+/206883
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change is the first step in centralizing control of modifications
to different files, either within the workspace or outside of it. We add
a source.FileAction type to pass into the internal/lsp/cache package and
handle the difference between opening and creating a file.
Now that we load all packages in a workspace by default, we no longer
need to re-load a file on open. This CL should enable CL 206883 to work
correctly.
Change-Id: I2ddb21ca2dd33720d668066e73283f5629d02867
Reviewed-on: https://go-review.googlesource.com/c/tools/+/206888
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change propagates the versions sent by the client to the overlay
so that they can be used when sending text edits for code actions and
renames.
Fixesgolang/go#35243
Change-Id: I8d1eb86fe9f666f7aa287be5026b176b46712c97
Reviewed-on: https://go-review.googlesource.com/c/tools/+/205863
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change makes sure that we only return files that contain the given
position. There are a few instances of needing to look up files by URI
in the internal/lsp/cache package, so use an unexported package for
that. This allows us to remove some code in the implementations code.
Change-Id: Ifa7a62c67271826e6c632e4c88667d60f8b760c4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/206880
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
This change adds support for returning versions along with file URIs, so
that the client can know when to apply changes. The version is not yet
propagated along to the internal/lsp/cache package, so this change will
have no effect (VS Code ignores a version of 0 and still applies the
changes).
A few minor changes made in the rename code (to remove the view
parameter). Some minor staticcheck fixes.
Updates golang/go#35243
Change-Id: Icc26bd9d9e5703c699f555424b94034c97b01d6f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/206882
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
We used to need our own copy of astutil.AddNamedImport to use during
completion for a variety of reasons, but I think the major one was
needing to not format the whole file. The same problem applied to using
the imports package.
Happily, that was resolved in CL 205678. Now we can use the same
implementation on both paths. In addition to removing a bunch of code,
that means that unimported completions now add their imports in the
right place, respecting goimports grouping and the local configuration
setting.
Fixesgolang/go#35519.
Change-Id: I693c2e8b5ced9bac62b1febf1e2db23c770e5a7a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/206881
Run-TryBot: Heschi Kreinick <heschi@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Look in all packages the snapshot knows of (through a new method on snapshot called
KnownPackages) and see if any of those packages contain implementations. Before,
the Implementation call only looked in the current package.
Much of the new complexity in implementation.go is routing through the Type to
Package data in the implementsResult.pkg field so the identifier can be looked up
in its correct package.
Fixesgolang/go#32973
Change-Id: Ifa7115b300f52fb4fb55cc00db2e7f339e8c2582
Reviewed-on: https://go-review.googlesource.com/c/tools/+/206518
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
It attempts to detect changes that would invalidate the view and replace itself
with a new view when that happens
Change-Id: I0f1a8cd3bd6ddcef115fedc6c57ae0398b16d3b6
Reviewed-on: https://go-review.googlesource.com/c/tools/+/206147
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds command line support for foldingRange.
Provided with a file, it will display a list of folding
ranges within that file, with 1-indexed positions using
the format
{startingLine}:{startingChar}-{endingLine}:{endingChar}
Example:
$ gopls folding_ranges ~/tmp/foo/main.go
$
$ 3:9-6:0
$ 10:22-11:32
$ 12:10-12:9
$ 12:20-30:0
Updates golang/go#32875
Change-Id: Ib35cf26088736e7c35612d783c80be7ae41b6a70
Reviewed-on: https://go-review.googlesource.com/c/tools/+/206158
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change copies the code in guru's implements implementation
that finds implementations of methods over to gopls, and uses
the information determined to resolve implements requests on
methods. Implements still only works only within packages.
Updates golang/go#32973
Change-Id: I0bd7849a9224fbef7ab8385070b18fbb30703e2b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/206150
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Add a special case for append() arguments so we infer the expected
type from the append() context. For example:
var foo []int
foo = append(<>)
We now infer the expected type at <> to be []int. We also support the
variadicity of append().
Change-Id: Ie0ef0007907fcb7992f9697cb90970ce4d9a66b8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/205606
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
I assumed that f.Pos() would be the first byte of the file, but it's the
position of the package declaration. This kills the file. Just use 0.
Fixesgolang/go#35458.
Change-Id: Ic77c93344c71435ef8e5624c2f2defb619139a15
Reviewed-on: https://go-review.googlesource.com/c/tools/+/206145
Run-TryBot: Heschi Kreinick <heschi@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Previously, if we failed to find an item's documentation, we would not
return the item at all. It seems better to do a best-effort approach,
i.e. return the item without documentation.
Fixesgolang/go#35406
Change-Id: I896ffda2fc79b9210f0d83311808114d0e686820
Reviewed-on: https://go-review.googlesource.com/c/tools/+/205862
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Heschi Kreinick <heschi@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Add a source.Scope type that can be used to refer to directories or
files, and modify (*snapshot).load to take source.Scope.
Then call load in NewView.
Change-Id: I8f03c7b271d700b162100d2890d23219ef9578c2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/204822
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We want people to add imports as they need them. That means we probably
don't want adding an import to reformat your whole file while you're in
the middle of editing it.
Unfortunately, the AST package doesn't offer any help with this --
there's no good way to get a diff out of it. Instead, we apply the
changes, then diff a subset of the file. Picking that subset is tricky,
see the code for details.
Also delete a dead function, Imports, which should have been unused but
was still being called in tests.
Fixesgolang/go#30843.
Change-Id: I09a5344e910f65510003c4006ea5b11657922315
Reviewed-on: https://go-review.googlesource.com/c/tools/+/205678
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Previously we were erroneously suggesting a "func() {}" literal in
cases like:
http.Handle("/", <>)
This was happening because saw that the http.HandlerFunc type
satisfied the http.Handler interface, and that http.HandlerFunc is a
function type. However, of course, you can't pass a function literal
to http.Handle().
Make a few tweaks to address the problem:
1. Don't suggest literal "func () {}" candidates if the expected type
is an interface type.
2. Suggest named function types that implement an interface. This
causes us to suggest "http.HandlerFunc()" in the above example.
3. Suggest a func literal candidate inside named function type
conversions. This will suggest "func() {}" when completing
"http.HandlerFunc(<>)".
This way the false positive func literal is gone, and you still get
literal candidates that help you use an http.HandlerFunc as an
http.Handler. Note that this particular example is not very compelling
in light of http.HandleFunc() which can take a func literal directly,
but such a convenience function may not exist in other analogous
situations.
Change-Id: Ia68097b9a5b8351921349340d18acd8876554691
Reviewed-on: https://go-review.googlesource.com/c/tools/+/205137
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Improve candidate ranking when completing the variadic parameter of
function calls.
Using the example:
func foo(strs ...string) {}
- When completing foo(<>), we prefer candidates of type []string or
string (previously we only preferred []string).
- When completing foo("hi", <>), we prefer candidates of type
string (previously we preferred []string).
- When completing foo(<>), we use a snippet to add on the "..."
automatically to candidates of type []string.
I also fixed completion tests to work properly when you have multiple
notes referring to the same position. For example:
foo() //@rank(")", a, b),rank(")", a, c)
Previously the second "rank" was silently overwriting the first
because they both refer to the same ")".
Fixesgolang/go#34334.
Change-Id: I4f64be44a4ccbb533fb7682738c759cbca3a93cd
Reviewed-on: https://go-review.googlesource.com/c/tools/+/205117
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In CL 205501 I thoughtlessly set import name to package name, but really
we only want to name imports when goimports would do it. For now, it's
better to not name them and let the usual imports code add a name if
necessary.
Fixesgolang/go#35397.
Change-Id: Id0df866f95e5e86ed72b25fbd1a7224c79ee8084
Reviewed-on: https://go-review.googlesource.com/c/tools/+/205657
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Add a new "verboseOutput" config flag (defaults to "false") to enable
verbose go/packages and imports output. Previously this output was
always present.
The go/packages output would dump out the entire (humongous) "go list"
JSON response which would lock up my editor for a second whenever
something triggered a go/packages call.
The imports output would produce a bunch of "gopathwalk" debug
messages that aren't useful in general and in particular add noisy
output to tests.
Change-Id: Ie4693d074cb84f1397e0e51d7346dc9391bd1278
Reviewed-on: https://go-review.googlesource.com/c/tools/+/205138
Reviewed-by: Koichi Shiraishi <zchee.io@gmail.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Unimported completions now try to pull Packages from everywhere, not
just the transitive dependencies of the current package. That confused
the import formatting code, which only looked at deps. Pass the Package
along with the import suggestion, and use it when it's present.
Also change some error messages to be different for diagnostic purposes.
Fixesgolang/go#35359.
Change-Id: Ia8ca923e46723e855ddd2da7611e6eb13c02bb4f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/205501
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Packages that aren't imported in the current file will often have been
used elsewhere, which means that gopls will have their type information
available. Expose loaded packages in the Snapshot, and try to use that
information when possible for unimported packages.
Change-Id: Icb672618a9f9ec31b9796f0c5da56ed3d2b38aa7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/204824
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
When a user completes rand.<>, propose rand.Seed (from math/rand) and
rand.Prime (from crypto/rand), etc.
Because we don't necessarily have type checking information for
unimported packages, I had to add shortcut cases to a number of
functions around the completion code. Better suggestions welcome.
Change-Id: I7822dc75c86b24156963e7bdd959443f4f2748b1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/204819
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Muir Manders <muir@mnd.rs>
