CL 450136 added handling for simple calls in staticinit. If there's any
derived types conversion in the body of generic function called, that
conversion will require runtime dictionary, thus the optimization could
not happen.
Fixes#56923
Change-Id: I498cee9f8ab4397812ef79a6c2ab6c55e0ee4aef
Reviewed-on: https://go-review.googlesource.com/c/go/+/453315
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Gabriel Morency (Amgc63spaming) <morencyvincent8@gmail.com>
if q != nil {
p = &q.f
}
Which gets rewritten to a conditional move:
tmp := &q.f
p = Select q!=nil, tmp, p
Unfortunately, we can't compute &q.f before we've checked if q is nil,
because if it is nil, &q.f is an invalid pointer (if f's offset is
nonzero but small).
Normally this is not a problem because the tmp variable above
immediately dies, and is thus not live across any safepoint. However,
if later there is another &q.f computation, those two computations are
CSEd, causing tmp to be used at both use points. That will extend
tmp's lifetime, possibly across a call.
Fixes#56990
Change-Id: I3ea31be93feae04fbe3304cb11323194c5df3879
Reviewed-on: https://go-review.googlesource.com/c/go/+/454155
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
This was disabled in CL 452676 out of an abundance of caution,
but further analysis has shown that the failures were not being
caused by this optimization. Instead the sequence of commits was:
CL 450136 cmd/compile: handle simple inlined calls in staticinit
...
CL 449937 archive/tar, archive/zip: return ErrInsecurePath for unsafe paths
...
CL 451555 cmd/compile: fix static init for inlined calls
The failures in question became compile failures in the first CL
and started building again after the last CL.
But in the interim the code had been broken by the middle CL.
CL 451555 was just the first time that the tests could run and fail.
For #30820.
Change-Id: I65064032355b56fdb43d9731be2f9f32ef6ee600
Reviewed-on: https://go-review.googlesource.com/c/go/+/452817
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Russ Cox <rsc@golang.org>
Auto-Submit: Russ Cox <rsc@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
This CL adds -d=inlstaticinit to control whether static initialization
of inlined function calls (added in CL 450136) is allowed.
We've needed to fix it once already (CL 451555) and Google-internal
testing is hitting additional failure cases, so putting this
optimization behind a feature flag seems appropriate regardless.
Also, while we diagnose and fix the remaining cases, this CL also
disables the optimization to avoid miscompilations.
Updates #56894.
Change-Id: If52a358ad1e9d6aad1c74fac5a81ff9cfa5a3793
Reviewed-on: https://go-review.googlesource.com/c/go/+/452676
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
This CL changes cmd/compile to reject anonymous interface cycles like:
type I interface { m() interface { I } }
We don't anticipate any users to be affected by this change in
practice. Nonetheless, this CL also adds a `-d=interfacecycles`
compiler flag to suppress the error. And assuming no issue reports
from users, we'll move the check into go/types and types2 instead.
Updates #56103.
Change-Id: I1f1dce2d7aa19fb388312cc020e99cc354afddcb
Reviewed-on: https://go-review.googlesource.com/c/go/+/445598
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
The previous rule may move the phi value into a wrong block.
This CL make it only rewrite the phi value not the If block,
so that the phi value will stay in old block.
Fixes#56777
Change-Id: I9479a5c7f28529786968413d35b82a16181bb1f1
Reviewed-on: https://go-review.googlesource.com/c/go/+/451496
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: David Chase <drchase@google.com>
For implementing interface to empty interface conversion, the compiler
generate code like:
var res *uint8
res = itab
if res != nil {
res = res.type
}
However, itab has type *uintptr, so the assignment is broken. The
problem is not shown up, until CL 450215, which call typecheck on this
broken assignment.
To fix this, just cast itab to *uint8 when doing the conversion.
Fixes#56768
Change-Id: Id42792d18e7f382578b40854d46eecd49673792c
Reviewed-on: https://go-review.googlesource.com/c/go/+/451256
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
CL 450136 made the compiler to be able to handle simple inlined calls in
staticinit. However, it's missed a condition when checking substituting
arg for param. If there's any non-trivial closures, it has captured one
of the param, so the substitution could not happen.
Fixes#56778
Change-Id: I427c9134e333e2f9af136c1a124da4d37d326f10
Reviewed-on: https://go-review.googlesource.com/c/go/+/451555
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: David Chase <drchase@google.com>
Cl 426334 removed its only usage, and now we have gcflags_noopt.
Change-Id: I3b33a8c868669deea00bf6dfcf8d81981504e293
Reviewed-on: https://go-review.googlesource.com/c/go/+/451255
Reviewed-by: Joedian Reid <joedian@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Given code like
func itou(i int) uint { return uint(i) }
var x = itou(-1)
the static inliner from CL 450136 was rewriting the code to
var x = uint(-1)
which is not valid Go code. Fix this by converting the
constants appropriately during inlining.
Fixes golang.org/x/image/vector test.
Change-Id: I13448df8504c6a70525b1cdc36e2c947e22cdd33
Reviewed-on: https://go-review.googlesource.com/c/go/+/451376
Auto-Submit: Russ Cox <rsc@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Fix noopt build break from CL 450136 by not running test.
I can't reproduce the failure locally, but it's entirely reasonable
for this test to fail when optimizations are disabled, so just don't
run it when optimizations are disabled.
Change-Id: I882760fc7373ba0449379f81d295312a6be49be1
Reviewed-on: https://go-review.googlesource.com/c/go/+/450740
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Michael Stapelberg <stapelberg@google.com>
Auto-Submit: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Global variable initializers like
var myErr error = &myError{"msg"}
have been converted to statically initialized data
from the earliest days of Go: there is no init-time
execution or allocation for that line of code.
But if the expression is moved into an inlinable function,
the static initialization no longer happens.
That is, this code has always executed and allocated
at init time, even after we added inlining to the compiler,
which should in theory make this code equivalent to
the original:
func NewError(s string) error { return &myError{s} }
var myErr2 = NewError("msg")
This CL makes the static initialization rewriter understand
inlined functions consisting of a single return statement,
like in this example, so that myErr2 can be implemented as
statically initialized data too, just like myErr, with no init-time
execution or allocation.
A real example of code that benefits from this rewrite is
all globally declared errors created with errors.New, like
package io
var EOF = errors.New("EOF")
Package io no longer has to allocate and initialize EOF each
time a program starts.
Another example of code that benefits is any globally declared
godebug setting (using the API from CL 449504), like
package http
var http2server = godebug.New("http2server")
These are no longer allocated and initialized at program startup either.
The list of functions that are inlined into static initializers when
compiling std and cmd (along with how many times each occurs) is:
cmd/compile/internal/ssa.StringToAux (3)
cmd/compile/internal/walk.mkmapnames (4)
errors.New (360)
go/ast.NewIdent (1)
go/constant.MakeBool (4)
go/constant.MakeInt64 (3)
image.NewUniform (4)
image/color.ModelFunc (11)
internal/godebug.New (12)
vendor/golang.org/x/text/unicode/bidi.newBidiTrie (1)
vendor/golang.org/x/text/unicode/norm.newNfcTrie (1)
vendor/golang.org/x/text/unicode/norm.newNfkcTrie (1)
For the cmd/go binary, this CL cuts the number of init-time
allocations from about 1920 to about 1620 (a 15% reduction).
The total executable code footprint of init functions is reduced
by 24kB, from 137kB to 113kB (an 18% reduction).
The overall binary size is reduced by 45kB,
from 15.335MB to 15.290MB (a 0.3% reduction).
(The binary size savings is larger than the executable code savings
because every byte of executable code also requires corresponding
runtime tables for unwinding, source-line mapping, and so on.)
Also merge test/sinit_run.go, which had stopped testing anything
at all as of CL 161337 (Feb 2019) and initempty.go into a new test
noinit.go.
Fixes#30820.
Change-Id: I52f7275b1ac2a0a32e22c29f9095071c7b1fac20
Reviewed-on: https://go-review.googlesource.com/c/go/+/450136
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Joedian Reid <joedian@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Auto-Submit: Russ Cox <rsc@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
CL 440455 fixed missing walk pass for static initialization slice.
However, slicelit may produce un-typechecked node, thus we need to do
typecheck for sinit before calling walkStmtList.
Fixes#56727
Change-Id: I40730cebcd09f2be4389d71c5a90eb9a060e4ab7
Reviewed-on: https://go-review.googlesource.com/c/go/+/450215
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Add a new SSA opcode ISELZ, similar to ISELB to represent a select
of value or 0. Then, merge candidate ISEL opcodes inside the late
lower pass.
This avoids complicating rules within the the lower pass.
Change-Id: I3b14c94b763863aadc834b0e910a85870c131313
Reviewed-on: https://go-review.googlesource.com/c/go/+/442596
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
Reviewed-by: Joedian Reid <joedian@golang.org>
If an imported, non-generic function F transitively calls a generic
function G[T], we may need to call CanInline on G[T].
While here, we can also take advantage of the fact that we know G[T]
was already seen and compiled in an imported package, so we don't need
to call InlineCalls or add it to typecheck.Target.Decls. This saves us
from wasting compile time re-creating DUPOK symbols that we know
already exist in the imported package's link objects.
Fixes#56280.
Change-Id: I3336786bee01616ee9f2b18908738e4ca41c8102
Reviewed-on: https://go-review.googlesource.com/c/go/+/443535
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
ISEL is roughly equivalent to CMOV on PPC64. Verify ISEL generation
in all reasonable cases.
Note "ISEL test x y z" is the same as "ISEL !test y x z". test is
always one of LT (0), GT (1), EQ (2), SO (3). Sometimes x and y are
swapped if GE/LE/NE is desired.
Change-Id: Ie1bf029224064e004d855099731fe5e8d05aa990
Reviewed-on: https://go-review.googlesource.com/c/go/+/445215
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Paul Murphy <murp@ibm.com>
Reviewed-by: Than McIntosh <thanm@google.com>
Prior to Go 1.18, ineffectual //go:linkname directives (i.e.,
directives referring to an undeclared name, or to a declared type or
constant) were treated as noops. In Go 1.18, we changed this into a
compiler error to mitigate accidental misuse.
However, the x/sys repo contained ineffectual //go:linkname directives
up until go.dev/cl/274573, which has caused a lot of user confusion.
It seems a bit late to worry about now, but to at least prevent
further user pain, this CL changes the error message to only apply to
modules using "go 1.18" or newer. (The x/sys repo declared "go 1.12"
at the time go.dev/cl/274573 was submitted.)
Fixes#55889.
Change-Id: Id762fff96fd13ba0f1e696929a9e276dfcba2620
Reviewed-on: https://go-review.googlesource.com/c/go/+/447755
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
This needs to be as low as possible while not breaking priority
assumptions of other scores to correctly schedule carry chains.
Prior to the arm64 changes, it was set below ReadTuple. At the time,
this prevented the MulHiLo implementation on PPC64 from occluding
the scheduling of a full carry chain.
Memory scores can also prevent better scheduling, as can be observed
with crypto/internal/edwards25519/field.feMulGeneric.
Fixes#56497
Change-Id: Ia4b54e6dffcce584faf46b1b8d7cea18a3913887
Reviewed-on: https://go-review.googlesource.com/c/go/+/447435
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
The go1 benchmark suite does a lot of work at package init time, which
makes it take quite a while to run even if you're not running any of
the benchmarks, or if you're only running a subset of them. This leads
to an awkward workaround in dist test to compile but not run the
package, unlike roughly all other packages. It also reduces isolation
between benchmarks by affecting the starting heap size of all
benchmarks.
Fix this by initializing all data required by a benchmark when that
benchmark runs, and keeping it local so it gets freed by the GC and
doesn't leak between benchmarks. Now, none of the benchmarks depend on
global state.
Re-initializing the data on each benchmark run does add overhead to an
actual benchmark run, as each benchmark function is called several
times with different values of b.N. A full run of all benchmarks at
the default -benchtime=1s now takes ~10% longer; higher -benchtimes
would be less. It would be quite difficult to cache this data between
invocations of the same benchmark function without leaking between
different benchmarks and affecting GC overheads, as the testing
package doesn't provide any mechanism for this.
This reduces the time to run the binary with no benchmarks from 1.5
seconds to 10 ms, and also reduces the memory required to do this from
342 MiB to 17 MiB.
To make sure data was not leaking between different benchmarks, I ran
the benchmarks with -shuffle=on. The variance remained low: mostly
under 3%. A few benchmarks had higher variance, but in all cases it
was similar to the variance between this change.
This CL naturally changes the measured performance of several of the
benchmarks because it dramatically changes the heap size and hence GC
overheads. However, going forward the benchmarks should be much better
isolated.
For #37486.
Change-Id: I252ebea703a9560706cc1990dc5ad22d1927c7a0
Reviewed-on: https://go-review.googlesource.com/c/go/+/443336
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
Run-TryBot: Austin Clements <austin@google.com>
The recently added rule only works before decomposing slices.
Add a rule that works after decomposing slices.
The reason we need the latter is because although the length may
be a constant, it can be hidden inside a slice that is not constant
(its pointer or capacity might be changing). By applying this
optimization after decomposing slices, we can find more cases
where it applies.
Fixes#56440
Change-Id: I0094e59eee3065ab4d210defdda8227a6e897420
Reviewed-on: https://go-review.googlesource.com/c/go/+/446277
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Fixes a performance regression due to CL 418554.
Fixes#56440
Change-Id: I6ff152e9b83084756363f49ee6b0844a7a284880
Reviewed-on: https://go-review.googlesource.com/c/go/+/445875
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Error messages currently print floats with %.6g, which means that if
you tried to convert something close to, but not quite, an integer, to
an integer, the error you get looks like "cannot convert 1 to type
int", when really you want "cannot convert 0.9999999 to type int".
Add more digits to floats when printing them, to make it clear that they
aren't quite integers. This helps for errors which are the result of not
being an integer. For other errors, it won't hurt much.
Fixes#56220
Change-Id: I7f5873af5993114a61460ef399d15316925a15a5
Reviewed-on: https://go-review.googlesource.com/c/go/+/442935
Reviewed-by: Rob Pike <r@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@google.com>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
Replace all uses of Ctz64/32/8 with TrailingZeros64/32/8, because they
are the same and maybe duplicated. Also renamed CtzXX functions in 386
assembly code.
Change-Id: I19290204858083750f4be589bb0923393950ae6d
Reviewed-on: https://go-review.googlesource.com/c/go/+/438935
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Auto-Submit: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
Using importcfg instead of depending on the existence of .a files for
standard library packages will enable us to remove the .a files in a
future cl.
Change-Id: I6108384224508bc37d82fd990fc4a8649222502c
Reviewed-on: https://go-review.googlesource.com/c/go/+/440222
Reviewed-by: Bryan Mills <bcmills@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
fakePC uses hash.Sum32, which returns an uint32. However, libfuzzer
trace/hook functions declare fakePC argument as int, causing overflow on
386 archs.
Fixing this by changing fakePC argument to uint to prevent the overflow.
Fixes#56141
Change-Id: I3994c461319983ab70065f90bf61539a363e0a2a
Reviewed-on: https://go-review.googlesource.com/c/go/+/441996
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
For #56109
Change-Id: I999763e463fac57732a92f5e396f8fa8c35bd2e1
Reviewed-on: https://go-review.googlesource.com/c/go/+/440297
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Auto-Submit: Ian Lance Taylor <iant@golang.org>
CL 403995 fixed static init of literal contains dynamic exprs, by
ensuring their init are ordered properly. However, we still need to walk
the generated init codes before appending to parent init. Otherwise,
codes that requires desugaring will be unhandled, causing the compiler
backend crashing.
Fixes#56105
Change-Id: Ic25fd4017473f5412c8e960a91467797a234edfd
Reviewed-on: https://go-review.googlesource.com/c/go/+/440455
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
For example:
movb a0, a0
srai $1, a0, a0
the assembler will expand to:
slli $56, a0, a0
srai $56, a0, a0
srai $1, a0, a0
this CL optimize to:
slli $56, a0, a0
srai $57, a0, a0
Remove 270+ instructions from Go binary on linux/riscv64.
Change-Id: I375e19f9d3bd54f2781791d8cbe5970191297dc8
Reviewed-on: https://go-review.googlesource.com/c/go/+/428496
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
Reviewed-by: Joel Sing <joel@sing.id.au>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This is the last failed test in Unified IR, since it can inline f5 and
f6 but the old frontend can not. So marking them as //go:noinline, with
a TODO for re-enable once GOEXPERIMENT=nounified is gone.
Fixes#53058
Change-Id: Ifbbc49c87997a53e1b323048f0067f0257655fad
Reviewed-on: https://go-review.googlesource.com/c/go/+/437217
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
The mismatch between Unified IR and the old frontend is not about how
they number the closures, but how they name them. For nested closure,
the old frontend use the immediate function which contains the closure
as the outer function, while Unified IR uses the outer most function as
the outer for all closures.
That said, what important is matching the number of closures, not their
name prefix. So this CL relax the test to match both "main.func1.func2"
and "main.func1.2" to satisfy both Unified IR and the old frontend.
Updates #53058
Change-Id: I66ed816d1968aa68dd3089a4ea5850ba30afd75b
Reviewed-on: https://go-review.googlesource.com/c/go/+/437216
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The linker needs FuncInfo metadata for all inlined functions. This is
typically handled by gc.enqueueFunc calling ir.InitLSym for all function
declarations in typecheck.Target.Decls (ir.UseClosure adds all closures
to Decls).
However, non-trivial closures in Decls are ignored, and are insteaded
enqueued when walk of the calling function discovers them.
This presents a problem for direct calls to closures. Inlining will
replace the entire closure definition with its body, which hides the
closure from walk and thus suppresses symbol creation.
Explicitly create a symbol early in this edge case to ensure we keep
this metadata.
InitLSym needs to move out of ssagen to avoid a circular dependency (it
doesn't have anything to do with ssa anyway). There isn't a great place
for it, so I placed it in ir, which seemed least objectionable.
The added test triggers one of these inlined direct non-trivial closure
calls, though the test needs CL 429637 to fail, which adds a FuncInfo
assertion to the linker. Note that the test must use "run" instead of
"compile" since the assertion is in the linker, and "compiler" doesn't
run the linker.
Fixes#54959.
Change-Id: I0bd1db4f3539a78da260934cd968372b7aa92546
Reviewed-on: https://go-review.googlesource.com/c/go/+/436240
Run-TryBot: Michael Pratt <mpratt@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
If a cycle has length 1, don't enumerate the single cycle entry;
instead just mention "refers to itself". For instance, for an
invalid recursive type T we now report:
invalid recursive type: T refers to itself
instead of:
invalid recursive type T
T refers to
T
Adjust tests to check for the different error messages.
Change-Id: I5bd46f62fac0cf167f0d0c9a55f952981d294ff4
Reviewed-on: https://go-review.googlesource.com/c/go/+/436295
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Robert Griesemer <gri@google.com>
This matches what go/types and types2 report and it also matches
the compiler errors reported for some related shift problems.
For #55326.
Change-Id: Iee40e8d988d5a7f9ff2c49f019884d02485c9fdf
Reviewed-on: https://go-review.googlesource.com/c/go/+/436177
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This is close to what the compiler used to say, except now we say
"as T value" rather than "as type T" which is closer to the truth
(we cannot use a value as a type, after all). Also, place the primary
error and the explanation (cause) on a single line.
Make respective (single line) adjustment to the matching "cannot
convert" error.
Adjust various tests.
For #55326.
Change-Id: Ib646cf906b11f4129b7ed0c38cf16471f9266b88
Reviewed-on: https://go-review.googlesource.com/c/go/+/436176
Reviewed-by: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Compromise between old compiler error "T.m redeclared in this block"
(where the "in this block" is not particularly helpful) and the old
type-checker error "method m already declared for type T ...".
In the case where we have position information for the original
declaration, the error message is "method T.m already declared at
<position>". The new message is both shorter and more precise.
For #55326.
Change-Id: Id4a7f326fe631b11db9e8030eccb417c72d6c7db
Reviewed-on: https://go-review.googlesource.com/c/go/+/435016
Run-TryBot: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
This is a compromise of the error reported by the compiler (quotes
around field name removed) and the error reported by the type checkers
(added mention of struct type).
For #55326.
Change-Id: Iac4fb5c717f17c6713e90d327d39e68d3be40074
Reviewed-on: https://go-review.googlesource.com/c/go/+/434815
Reviewed-by: Robert Findley <rfindley@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
This matches longstanding compiler behavior.
Also, for unused packages, report:
`"pkg" imported and not used`
`"pkg" imported as X and not used`
This matches the other `X declared and not used` errors.
For #55326.
Change-Id: Ie71cf662fb5f4648449c64fc51bede298a1bdcbf
Reviewed-on: https://go-review.googlesource.com/c/go/+/432557
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
Partial overlaps can only happen for strict sub-pieces of larger arrays.
That's a much stronger condition than the current optimization rules.
Update #54467
Change-Id: I11e539b71099e50175f37ee78fddf69283f83ee5
Reviewed-on: https://go-review.googlesource.com/c/go/+/433056
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
1. replace [0-9] with \d in regexps
2. replace [a-zA-Z0-9_] with \w in regexps
Change-Id: I9e260538252a0c1071e76aeb1c5f885c6843a431
GitHub-Last-Rev: 286e1a4619
GitHub-Pull-Request: golang/go#54874
Reviewed-on: https://go-review.googlesource.com/c/go/+/428435
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Auto-Submit: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@google.com>
For #55326
Change-Id: I3d0ff7f820f7b2009d1b226abf701b2337fe8cbc
Reviewed-on: https://go-review.googlesource.com/c/go/+/432635
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
Run-TryBot: xie cui <523516579@qq.com>
Reviewed-by: Robert Griesemer <gri@google.com>
This CL adds some optimizaion rules:
1, Converts CMP to CMN, or vice versa, when comparing with a negative
number.
2, For equal and not equal comparisons, CMP can be converted to CMN in
some cases. In theory we could do the same optimization for LT, LE, GT
and GE, but need to account for overflow, this CL doesn't handle them.
There are no noticeable performance changes.
Change-Id: Ia49266c019ab7908ebc9510c2f02e121b1607869
Reviewed-on: https://go-review.googlesource.com/c/go/+/429795
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Eric Fang <eric.fang@arm.com>
The nounified frontend currently tries to construct dictionaries that
correspond to invalid instantiations (i.e., instantiations T[X] where
X does not satisfy the constraints specified on T's type parameter).
As a consequence, we may fail to find method expressions needed by the
dictionary.
The real fix for this is to avoid creating those dictionaries in the
first place, because they should never actually be needed at runtime.
But that seems scary for a backport: we've repeatedly attempted to
backport generics fixes, which have fixed one issue but introduced
another.
This CL is a minimally invasive solution to #54225, which avoids the
ICE by instead skipping emitting the invalid dictionary. If the
dictionary ends up not being needed (which I believe will always be
the case), then the linker's reachability analysis will simply ignore
its absence.
Or worst case, if the dictionary *is* reachable somehow, we've simply
turned an ICE into a link-time missing symbol failure. That's not
great for user experience, but it seems like a small trade off to
avoid risking breaking any other currently working code.
Updates #54225.
Change-Id: Ic379696079f4729b1dd6a66994a58cca50281a84
Reviewed-on: https://go-review.googlesource.com/c/go/+/429655
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
The conversion T(x) is implemented as *(*T)(x). Accordingly, runtime
panic messages for (*T)(x) are made more general.
Fixes#46505.
Change-Id: I76317c0878b6a5908299506d392eed50d7ef6523
Reviewed-on: https://go-review.googlesource.com/c/go/+/430415
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Jenny Rakoczy <jenny@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
This test case already works with GOEXPERIMENT=unified, and it never
worked with Go 1.18 or Go 1.19. So this CL simply adds a regress test
to make sure it continues working.
Fixes#55101.
Change-Id: I7e06bfdc136ce124f65cdcf02d20a1050b841d42
Reviewed-on: https://go-review.googlesource.com/c/go/+/431455
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
The type of the source and destination of a memmove call isn't
always accurate. It will always be a pointer (or an unsafe.Pointer), but
the base type might not be accurate. This comes about because multiple
copies of a pointer with different base types are coalesced into a single value.
In the failing example, the IData selector of the input argument is a
*[32]byte in one branch of the type switch, and a *[]byte in the other branch.
During the expand_calls pass both IDatas become just copies of the input
register. Those copies are deduped and an arbitrary one wins (in this case,
*[]byte is the unfortunate winner).
Generally an op v can rely on v.Type during rewrite rules. But relying
on v.Args[i].Type is discouraged.
Fixes#55122
Change-Id: I348fd9accf2058a87cd191eec01d39cda612f120
Reviewed-on: https://go-review.googlesource.com/c/go/+/431496
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Now we have 8-byte alignment types on 32-bit system, so in some rare
case, e.g, generated wrapper for embedded interface, the function
argument may need more than 4 byte alignment. We could pad somehow, but
this is a rare case which makes it hard to ensure that we've got it right.
So relaxing the check for argument and return value region of the stack.
Fixes#54991
Change-Id: I34986e17a920254392a39439ad3dcb323da2ea8d
Reviewed-on: https://go-review.googlesource.com/c/go/+/431098
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
When SLTI/SLTIU is used with ANDI/ORI, it may be possible to determine the
outcome based on the values of the immediates. Resolve these cases.
Improves code generation for various shift operations.
While here, sort tests by architecture to improve readability and ease
future maintenance.
Change-Id: I87e71e016a0e396a928e7d6389a2df61583dfd8d
Reviewed-on: https://go-review.googlesource.com/c/go/+/428217
Reviewed-by: Wayne Zuo <wdvxdr@golangcn.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Jenny Rakoczy <jenny@golang.org>
Reviewed-by: Jenny Rakoczy <jenny@golang.org>
Run-TryBot: Joel Sing <joel@sing.id.au>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Auto-Submit: Jenny Rakoczy <jenny@golang.org>
Go 1.19 introduce new append-like APIs in package encoding/binary, this
change teaches the inliner to treat calls to these methods as cheap, so
that code using them will be more inlineable.
Updates #42958
Change-Id: Ie3dd4906e285430f435bdedbf8a11fdffce9302d
Reviewed-on: https://go-review.googlesource.com/c/go/+/431015
Auto-Submit: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Jenny Rakoczy <jenny@golang.org>
Reviewed-by: Jenny Rakoczy <jenny@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Jenny Rakoczy <jenny@golang.org>
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
Reviewed-by: Keith Randall <khr@google.com>
This CL adds shiftIsBounded checks for the Lsh* and Rsh* rules in arm64.
There is no need to check the shift value again with CMP + CSEL when the
shift value is valid.
Change-Id: I54620de64f02a1b5a11089add237248ae2de01b4
Reviewed-on: https://go-review.googlesource.com/c/go/+/417714
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
When naming case variables, the unified frontend was using
typecheck.Lookup, which uses the current package, rather than
localIdent, which uses the package the variable was originally
declared in. When inlining across package boundaries, this could cause
the case variables to be associated with the wrong package.
In practice, I don't believe this has any negative consequences, but
it's inconsistent and triggered an ICE in typecheck.ClosureType, which
expected all captured variables to be declared in the same package.
Easy fix is to ensure case variables are declared in the correct
package by using localIdent.
Fixes#54912.
Change-Id: I7a429c708ad95723f46a67872cb0cf0c53a6a0d6
Reviewed-on: https://go-review.googlesource.com/c/go/+/428918
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Benny Siegert <bsiegert@gmail.com>
The unified frontend ICEs when inlining a function that contains a
function literal, which captures both a type switch case variable and
another variable.
Updates #54912.
Change-Id: I0e16d371ed5df48a70823beb0bf12110a5a17266
Reviewed-on: https://go-review.googlesource.com/c/go/+/428917
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
The toStringData test was meant to test reflect.StringHeader, not
reflect.SliceHeader. It's not supported to convert *string to
*reflect.SliceHeader anyway.
Change-Id: Iaa4912eafd241886c6337bd7607cdf2412a15ead
Reviewed-on: https://go-review.googlesource.com/c/go/+/428995
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
It was fixed by CL 422196, and have been already worked in unified IR.
Fixes#54911
Change-Id: Ie69044a64b296f6961e667e7661d8c4d1a24d84e
Reviewed-on: https://go-review.googlesource.com/c/go/+/428758
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This reverts commit CL 427140.
Reason for revert: Comments say that done should be the first field.
Change-Id: Id131da064146b44e1182289546aeb877867e63cc
Reviewed-on: https://go-review.googlesource.com/c/go/+/428638
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
For defer/go calls, the function/method value are evaluated immediately.
So after devirtualizing, it may trigger a panic when implicitly deref
a nil pointer receiver, causing the program behaves unexpectedly.
It's safer to not devirtualizing defer/go calls at all.
Fixes#52072
Change-Id: I562c2860e3e577b36387dc0a12ae5077bc0766bf
Reviewed-on: https://go-review.googlesource.com/c/go/+/428495
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Change-Id: I49f8c764d49cabaad4d6859c219ba7220a389c1f
Reviewed-on: https://go-review.googlesource.com/c/go/+/427140
Run-TryBot: xie cui <523516579@qq.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Currently, gentraceback tracks the closure context of the outermost
frame. This used to be important for "unstarted" calls to reflect
function stubs, where "unstarted" calls are either deferred functions
or the entry-point of a goroutine that hasn't run. Because reflect
function stubs have a dynamic argument map, we have to reach into
their closure context to fetch to map, and how to do this differs
depending on whether the function has started. This was discovered in
issue #25897.
However, as part of the register ABI, "go" and "defer" were made much
simpler, and any "go" or "defer" of a function that takes arguments or
returns results gets wrapped in a closure that provides those
arguments (and/or discards the results). Hence, we'll see that closure
instead of a direct call to a reflect stub, and can get its static
argument map without any trouble.
The one case where we may still see an unstarted reflect stub is if
the function takes no arguments and has no results, in which case the
compiler can optimize away the wrapper closure. But in this case we
know the argument map is empty: the compiler can apply this
optimization precisely because the target function has no argument
frame.
As a result, we no longer need to track the closure context during
traceback, so this CL drops all of that mechanism.
We still have to be careful about the unstarted case because we can't
reach into the function's locals frame to pull out its context
(because it has no locals frame). We double-check that in this case
we're at the function entry.
I would prefer to do this with some in-code PCDATA annotations of
where to find the dynamic argument map, but that's a lot of mechanism
to introduce for just this. It might make sense to consider this along
with #53609.
Finally, we beef up the test for this so it more reliably forces the
runtime down this path. It's fundamentally probabilistic, but this
tweak makes it better. Scheduler testing hooks (#54475) would make it
possible to write a reliable test for this.
For #54466, but it's a nice clean-up all on its own.
Change-Id: I16e4f2364ba2ea4b1fec1e27f971b06756e7b09f
Reviewed-on: https://go-review.googlesource.com/c/go/+/424254
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
Auto-Submit: Austin Clements <austin@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
In go.dev/cl/421821, I included a hack to force OCONVNOP back to
OCONVIFACE for conversions involving shape types and non-empty
interfaces. The comment correctly noted that this was only needed for
conversions between non-identical types, but the code was conservative
and applied to even conversions between identical types.
This CL adds an extra bool to record whether the conversion is between
identical types, so we can keep OCONVNOP instead of forcing back to
OCONVIFACE. This has a small improvement to generated code, because we
no longer need a convI2I call (as demonstrated by codegen/ifaces.go).
But more usefully, this is relevant to pruning unnecessary itab slots
in runtime dictionaries (next CL).
Change-Id: I94f89e961cd26629b925037fea58d283140766ff
Reviewed-on: https://go-review.googlesource.com/c/go/+/427678
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This CL changes the heuristic used to determine whether we can inline a
struct equality check or if we must generate a function and call that
function for equality.
The old method was to count struct fields, but this can lead to poor
in lining decisions. We should really be determining the cost of the
equality check and use that to determine if we should inline or generate
a function.
The new benchmark provided in this CL returns the following when compared
against tip:
```
name old time/op new time/op delta
EqStruct-32 2.46ns ± 4% 0.25ns ±10% -89.72% (p=0.000 n=39+39)
```
Fixes#38494
Change-Id: Ie06b80a2b2a03a3fd0978bcaf7715f9afb66e0ab
GitHub-Last-Rev: e9a18d9389
GitHub-Pull-Request: golang/go#53326
Reviewed-on: https://go-review.googlesource.com/c/go/+/411674
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Auto-Submit: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This CL optimizes RotateLeft8/16 on arm64.
For 16 bits, we form a 32 bits register by duplicating two 16 bits
registers, then use RORW instruction to do the rotate shift.
For 8 bits, we just use LSR and LSL instead of RORW because the code is
simpler.
Benchmark Old ThisCL delta
RotateLeft8-46 2.16 ns/op 1.73 ns/op -19.70%
RotateLeft16-46 2.16 ns/op 1.54 ns/op -28.53%
Change-Id: I09cde4383d12e31876a57f8cdfd3bb4f324fadb0
Reviewed-on: https://go-review.googlesource.com/c/go/+/420976
Reviewed-by: Keith Randall <khr@google.com>
Auto-Submit: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
So they can be added to ignored list, since the tests now require
cgo.Incomplete, which is not recognized by go/types and types2.
Updates #46731
Change-Id: I9f24e3c8605424d1f5f42ae4409437198f4c1326
Reviewed-on: https://go-review.googlesource.com/c/go/+/427142
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
For the following code case:
var x uint64
x >> (shift & 63)
We can directly genereta `x >> shift` on arm64, since the hardware will
only use the bottom 6 bits of the shift amount.
Benchmark old time/op new time/op delta
ShiftArithmeticRight-8 0.40ns 0.31ns -21.7%
Change-Id: Id58c8a5b2f6dd5c30c3876f4a36e11b4d81e2dc9
Reviewed-on: https://go-review.googlesource.com/c/go/+/425294
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
On AIX when external linking, for some symbols we need to add
dummy references to prevent the external linker from discarding
them. Currently we add the reference unconditionally. But if the
symbol doesn't exist, the linking fails in a later stage for
generating external relocation of a nonexistent symbol. The
symbols are special symbols that almost always exist, except that
go:buildid may not exist if the linker is invoked without the
-buildid flag. The go command invokes the linker with the flag, so
this can only happen with manual linker invocation. Specifically,
test/run.go does this in some cases.
Fix this by checking the symbol existence before adding the
reference. Re-enable tests on AIX.
Perhaps the linker should always emit a dummy buildid even if the
flag is not set...
Fixes#54814.
Change-Id: I43d81587151595309e189e38960cbda9a1c5ca32
Reviewed-on: https://go-review.googlesource.com/c/go/+/427620
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
So it won't be visible outside of runtime package. There are changes to
make tests happy:
- For test/directive*.go files, using "go:noinline" for testing misplaced
directives instead.
- Restrict test/fixedbugs/bug515.go for gccgo only.
- For test/notinheap{2,3}.go, using runtime/cgo.Incomplete for marking
the type as not-in-heap. Though it's somewhat clumsy, it's the easiest
way to keep the test errors for not-in-heap types until we can cleanup
further.
- test/typeparam/mdempsky/11.go is about defined type in user code marked
as go:notinheap, which can't happen after this CL, though.
Fixes#46731
Change-Id: I869f5b2230c8a2a363feeec042e7723bbc416e8e
Reviewed-on: https://go-review.googlesource.com/c/go/+/421882
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Joedian Reid <joedian@golang.org>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The syntax for go and defer specifies an arbitrary expression, not
a call; the call requirement is spelled out in prose. Don't to the
call check in the parser; instead move it to the type checker. This
is simpler and also allows the type checker to check expressions that
are not calls, and avoid "not used" errors due to such expressions.
We would like to make the same change in go/parser and go/types
but the change requires Go/DeferStmt nodes to hold an ast.Expr
rather than an *ast.CallExpr. We cannot change that for backward-
compatibility reasons. Since we don't test this behavior for the
type checkers alone (only for the compiler), we get away with it
for now.
Follow-up on CL 425675 which introduced the extra errors in the
first place.
Change-Id: I90890b3079d249bdeeb76d5673246ba44bec1a7b
Reviewed-on: https://go-review.googlesource.com/c/go/+/425794
Reviewed-by: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Alan Donovan <adonovan@google.com>
- Use "expected X" rather then "expecting X".
- Report a better error when a type argument list is expected.
- Adjust various tests.
For #54511.
Change-Id: I0c5ca66ecbbdcae1a8f67377682aae6b0b6ab89a
Reviewed-on: https://go-review.googlesource.com/c/go/+/425734
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Alan Donovan <adonovan@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
If the go/defer syntax is bad, using a fake CallExpr may produce
a follow-on error in the type checker. Instead store a BadExpr
in the syntax tree (since an error has already been reported).
Adjust various tests.
For #54511.
Change-Id: Ib2d25f8eab7d5745275188d83d11620cad6ef47c
Reviewed-on: https://go-review.googlesource.com/c/go/+/425675
Reviewed-by: Alan Donovan <adonovan@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Since when go/types,types2 do not know about build constraints, and
runtime/cgo.Incomplete is only available on platforms that support cgo.
These tests are also failing on aix with failure from linker, so disable
them on aix to make builder green. The fix for aix is tracked in #54814
Updates #46731
Updates #54814
Change-Id: I5d6f6e29a8196efc6c457ea64525350fc6b20309
Reviewed-on: https://go-review.googlesource.com/c/go/+/427394
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Same as CL 421880, but for test directory.
Updates #46731
Change-Id: If8d18df013a6833adcbd40acc1a721bbc23ca6b2
Reviewed-on: https://go-review.googlesource.com/c/go/+/421881
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
After running the types2 type checker, walk info.Instances to reject
any not-in-heap type arguments. This is feasible to check using the
types2 API now, thanks to #46731.
Fixes#54765.
Change-Id: Idd2acc124d102d5a76f128f13c21a6e593b6790b
Reviewed-on: https://go-review.googlesource.com/c/go/+/427235
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@google.com>
Rotating by c, then by d, is the same as rotating by c+d.
Change-Id: I36df82261460ff80f7c6d39bcdf0e840cef1c91a
Reviewed-on: https://go-review.googlesource.com/c/go/+/424894
Reviewed-by: Wayne Zuo <wdvxdr@golangcn.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Ruinan Sun <Ruinan.Sun@arm.com>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Currently we use a full cmpstring to do the comparison for each
split in the binary search for a string switch.
Instead, split by comparing a single byte of the input string with a
constant. That will give us a much faster split (although it might be
not quite as good a split).
Fixes#53333
R=go1.20
Change-Id: I28c7209342314f367071e4aa1f2beb6ec9ff7123
Reviewed-on: https://go-review.googlesource.com/c/go/+/414894
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
for i := 0; i < 9; i += 3
Currently we compute bounds of [0,8]. Really we know that it is [0,6].
CL 415874 computed the better bound as part of overflow detection.
This CL just incorporates that better info to the prove pass.
R=go1.20
Change-Id: Ife82cc415321f6652c2b5d132a40ec23e3385766
Reviewed-on: https://go-review.googlesource.com/c/go/+/415937
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
The prove pass will mark some shifts bounded, and then we can use that
information to generate better code on riscv64.
Change-Id: Ia22f43d0598453c9417adac7017db28d7240948b
Reviewed-on: https://go-review.googlesource.com/c/go/+/422616
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Joel Sing <joel@sing.id.au>
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Auto-Submit: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
If x+delta cannot overflow/underflow, we can derive:
x+delta < x if delta<0 (this CL included)
x+delta > x if delta>0 (this CL not included due to
a recursive stack overflow)
Remove 95 bounds checks during ./make.bat
Fixes#51622
Change-Id: I60d9bd84c5d7e81bbf808508afd09be596644f09
Reviewed-on: https://go-review.googlesource.com/c/go/+/406175
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
CL 327871 changes methodWrapper to always perform inlining after global
escape analysis. However, inlining the method may reveal closures, which
require walking all function bodies to decide whether to capture free
variables by value or by ref.
To fix it, just not doing inline if the method contains any closures.
Fixes#53702
Change-Id: I4b0255b86257cc6fe7e5fafbc545cc5cff9113e1
Reviewed-on: https://go-review.googlesource.com/c/go/+/426334
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Shape-based stenciling in unified IR is done by converting type argument
to its underlying type. So it agressively check that type argument is
not a TFORW. However, for recursive instantiated type argument, it may
still be a TFORW when shapifying happens. Thus the assertion failed,
causing the compiler crashing.
To fix it, just allow fully instantiated type when shapifying.
Fixes#54512Fixes#54722
Change-Id: I527e3fd696388c8a37454e738f0324f0c2ec16cb
Reviewed-on: https://go-review.googlesource.com/c/go/+/426335
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
In typebits.Set we check that the offset is a multiple of the
alignment, which makes perfect sense. But for values like
atomic.Int64, which has 8-byte alignment even on 32-bit platforms
(i.e. the alignment is larger than PtrSize), if it is on stack it
may be under-aligned, as the stack frame is only PtrSize aligned.
Normally we would prevent such values on stack, as the escape
analysis force values with higher alignment to heap. But for a
composite literal assignment like x = AlignedType{...}, the
compiler creates an autotmp for the RHS then copies it to the LHS.
The autotmp is on stack and may be under-aligned. Currently this
may cause an ICE in the typebits.Set check.
This CL makes it align the _offset_ of the autotmp to 8 bytes,
which satisfies the check. Note that this is actually lying: the
actual address at run time may not necessarily be 8-byte
aligned as we only align SP to 4 bytes.
The under-alignment is probably okay. The only purpose for the
autotmp is to copy the value to the LHS, and the copying code we
generate (at least currently) doesn't care the alignment beyond
stack alignment.
Fixes#54638.
Change-Id: I13c16afde2eea017479ff11dfc24092bcb8aba6a
Reviewed-on: https://go-review.googlesource.com/c/go/+/425256
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
When inlining function calls, we rewrite the position information on
all of the nodes to keep track of the inlining context. This is
necessary so that at runtime, we can synthesize additional stack
frames so that the inlining is transparent to the user.
However, for function literals, we *don't* want to apply this
rewriting to the underlying function. Because within the function
literal (when it's not itself inlined), the inlining context (if any)
will have already be available at the caller PC instead.
Unified IR was already getting this right in the case of user-written
statements within the function literal, which is what the unit test
for #46234 tested. However, it was still using inline-adjusted
positions for the function declaration and its parameters, which
occasionally end up getting used for generated code (e.g., loading
captured values from the closure record).
I've manually verified that this fixes the hang in
https://go.dev/play/p/avQ0qgRzOgt, and spot-checked the
-d=pctab=pctoinline output for kube-apiserver and kubelet and they
seem better.
However, I'm still working on a more robust test for this (hence
"Updates" not "Fixes") and internal assertions to verify that we're
emitting correct inline trees. In particular, there are still other
cases (even in the non-unified frontend) where we're producing
corrupt (but at least acyclic) inline trees.
Updates #54625.
Change-Id: Iacfd2e1eb06ae8dc299c0679f377461d3d46c15a
Reviewed-on: https://go-review.googlesource.com/c/go/+/425395
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This is a follow up of CL 425101 on RISCV64.
According to RISCV Volume 1, Unprivileged Spec v. 20191213 Chapter 7.1:
If both the high and low bits of the same product are required, then the
recommended code sequence is: MULH[[S]U] rdh, rs1, rs2; MUL rdl, rs1, rs2
(source register specifiers must be in same order and rdh cannot be the
same as rs1 or rs2). Microarchitectures can then fuse these into a single
multiply operation instead of performing two separate multiplies.
So we should not split Muluhilo to separate instructions.
Updates #54607
Change-Id: If47461f3aaaf00e27cd583a9990e144fb8bcdb17
Reviewed-on: https://go-review.googlesource.com/c/go/+/425203
Auto-Submit: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
This CL changes the inliner to process transitive inlining iteratively
after the AST has actually been edited, rather than recursively and
immediately. This is important for handling indirect function calls
correctly, because ir.reassigned walks the function body looking for
reassignments; whereas previously the inlined reassignments might not
have been actually added to the AST yet.
Fixes#54632.
Change-Id: I0dd69813c8a70b965174e0072335bc00afedf286
Reviewed-on: https://go-review.googlesource.com/c/go/+/425257
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
Detect rotate instructions while still in architecture-independent form.
It's easier to do here, and we don't need to repeat it in each
architecture file.
Change-Id: I9396954b3f3b3bfb96c160d064a02002309935bb
Reviewed-on: https://go-review.googlesource.com/c/go/+/421195
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Eric Fang <eric.fang@arm.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Joedian Reid <joedian@golang.org>
Reviewed-by: Ruinan Sun <Ruinan.Sun@arm.com>
Run-TryBot: Keith Randall <khr@golang.org>
Normally, when moving Go values of type T from one location to another,
we don't need to worry about partial overlaps. The two Ts must either be
in disjoint (nonoverlapping) memory or in exactly the same location.
There are 2 cases where this isn't true:
1) Using unsafe you can arrange partial overlaps.
2) Since Go 1.17, you can use a cast from a slice to a ptr-to-array.
https://go.dev/ref/spec#Conversions_from_slice_to_array_pointer
This feature can be used to construct partial overlaps of array types.
var a [3]int
p := (*[2]int)(a[:])
q := (*[2]int)(a[1:])
*p = *q
We don't care about solving 1. Or at least, we haven't historically
and no one has complained.
For 2, we need to ensure that if there might be partial overlap,
then we can't use OpMove; we must use memmove instead.
(memmove handles partial overlap by copying in the correct
direction. OpMove does not.)
Note that we have to be careful here not to introduce a call when
we're marshaling arguments to a call or unmarshaling results from a call.
Fixes#54467
Change-Id: I1ca6aba8041576849c1d85f1fa33ae61b80a373d
Reviewed-on: https://go-review.googlesource.com/c/go/+/425076
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
This reverts CL 424854.
Reason for revert: broke misc/cgo/stdio.TestTestRun on several builders.
Will re-land after CL 421879 is submitted.
Change-Id: I2548c70d33d7c178cc71c1d491cd81c22660348f
Reviewed-on: https://go-review.googlesource.com/c/go/+/425214
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
In CL 424734, I implemented pointer shaping for unified IR. Evidently
though, we didn't have any test cases that check that uses of
pointer-shaped expressions were handled correctly.
In the reported test case, the struct field "children items[*node[T]]"
gets shaped to "children items[go.shape.*uint8]" (underlying type
"[]go.shape.*uint8"); and so the expression "n.children[i]" has type
"go.shape.*uint8" and the ".items" field selection expression fails.
The fix implemented in this CL is that any expression of derived type
now gets an explicit "reshape" operation applied to it, to ensure it
has the appropriate type for its context. E.g., the "n.children[i]"
OINDEX expression above gets "reshaped" from "go.shape.*uint8" to
"*node[go.shape.int]", allowing the field selection to succeed.
This CL also adds a "-d=reshape" compiler debugging flag, because I
anticipate debugging reshaping operations will be something to come up
again in the future.
Fixes#54535.
Change-Id: Id847bd8f51300d2491d679505ee4d2e974ca972a
Reviewed-on: https://go-review.googlesource.com/c/go/+/424936
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: hopehook <hopehook@qq.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
During walk, we sometimes desugar OEQ nodes into multiple "untyped
bool" expressions, and then use typecheck.Conv to convert back to the
original OEQ node's type.
However, typecheck.Conv had a short-circuit path that if the type is
already identical to the target type according to types.Identical,
then we skipped the conversion. This short-circuit is normally fine;
but with generic code and shape types, it considers "untyped bool" and
"go.shape.bool" to be identical types. And we could end up leaving an
expression of "untyped bool", which then fails an internal consistency
check later.
The simple fix is to change Conv to use types.IdenticalStrict, so that
we ensure "untyped bool" gets converted to "go.shape.bool". And for
good measure, make the same change to ConvNop.
This issue was discovered and reported against unified IR, but the
issue was latent within the non-unified frontend too.
Fixes#54537.
Change-Id: I7559a346b063349b35749e8a2da704be18e51654
Reviewed-on: https://go-review.googlesource.com/c/go/+/424937
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
To disambiguate local types, we append a "·N" suffix to their name and
then trim it off again when producing their runtime type descriptors.
However, if a local type is generic, then we were further appending
the type arguments after this suffix, and the code in types/fmt.go
responsible for trimming didn't know to handle this.
We could extend the types/fmt.go code to look for the "·N" suffix
elsewhere in the type name, but this is risky because it could
legitimately (albeit unlikely) appear in struct field tags.
Instead, the most robust solution is to just change the mangling logic
to keep the "·N" suffix at the end, where types/fmt.go can easily and
reliably trim it.
Note: the "·N" suffix is still visible within the type arguments
list (e.g., the "·3" suffixes in nested.out), because we currently use
the link strings in the type arguments list.
Fixes#54456.
Change-Id: Ie9beaf7e5330982f539bff57b8d48868a3674a37
Reviewed-on: https://go-review.googlesource.com/c/go/+/424901
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Than McIntosh <thanm@google.com>
When handling a type declaration like:
```
type B A
```
unified IR has been writing out that B's underlying type is A, rather
than the underlying type of A.
This is a bit awkward to implement and adds complexity to importers,
who need to handle resolving the underlying type themselves. But it
was necessary to handle when A was declared like:
```
//go:notinheap
type A int
```
Because we expected A's not-in-heap'ness to be conferred to B, which
required knowing that A was on the path from B to its actual
underlying type int.
However, since #46731 was accepted, we no longer need to support this
case. Instead we can write out B's actual underlying type.
One stumbling point though is the existing code for exporting
interfaces doesn't work for the underlying type of `comparable`, which
is now needed to implement `type C comparable`. As a bit of a hack, we
we instead export its underlying type as `interface{ comparable }`.
Fixes#54512.
Change-Id: I0fb892068d656f1e87bb8ef97da27756051126d5
Reviewed-on: https://go-review.googlesource.com/c/go/+/424854
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Previously we convert $0 to the ZR register for some reasons, which causes
two problems:
1. Confusion, the special case of the ZR register needs to be considered
when dealing with constants. For encoding, some places we encode ZR, and
some places we encode $0, although we have converted $0 to ZR.
2. Unexpected instruction format. All instructions that support ZR register
operands can be replaced by $0.
This patch removes this conversion. Note that this patch may cause previously
unintendedly supported instruction formats to no longer be supported.
Change-Id: I3d8d2c06711b7614a38191397da7776417f1861c
Reviewed-on: https://go-review.googlesource.com/c/go/+/404316
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Eric Fang <eric.fang@arm.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
On ARM64 we use two separate instructions to compute the hi and lo
results of a 64x64->128 multiplication. Lower to two separate ops
so if only one result is needed we can deadcode the other.
Fixes#54607.
Change-Id: Ib023e77eb2b2b0bcf467b45471cb8a294bce6f90
Reviewed-on: https://go-review.googlesource.com/c/go/+/425101
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
For #23870
Change-Id: I3bbe0f751254d1354a59a88b45e6f944c7a2fb4d
Reviewed-on: https://go-review.googlesource.com/c/go/+/417874
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
With the introduction of stack objects, VARKILL information is
no longer needed.
With stack objects, an object is dead when there are no more static
references to it, and the stack scanner can't find any live pointers
to it. VARKILL information isn't used to establish live ranges for
address-taken variables any more. In effect, the last static reference
*is* the VARKILL, and there's an additional dynamic liveness check
during stack scanning.
Next CL will actually rip out the VARKILL opcodes.
Change-Id: I030a2ab867445cf4e0e69397911f8a2e2f0ed07b
Reviewed-on: https://go-review.googlesource.com/c/go/+/419234
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
We don't need this special loop construct anymore now that we do
conservative GC scanning of the top of stack. Rewrite instead to a simple
pointer increment on every iteration. This leads to having a potential
past-the-end pointer at the end of the last iteration, but that value
immediately goes dead after the loop condition fails, and the past-the-end
pointer is never live across any call.
This simplifies and speeds up loops.
R=go1.20
TODO: actually delete all support for OFORUNTIL. It is now never generated,
but code to handle it (e.g. in ssagen) is still around.
TODO: in "for _, x := range" loops, we could get rid of the index
altogether and use a "pointer to the last element" reference to determine
when the loop is complete.
Fixes#53409
Change-Id: Ifc141600ff898a8bc6a75f793e575f8862679ba1
Reviewed-on: https://go-review.googlesource.com/c/go/+/414876
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The non-unified frontend had repeated issues with inlining and
generics (#49309, #51909, #52907), which led us to substantially
restrict inlining when shape types were present.
However, these issues are evidently not present in unified IR's
inliner, and the safety restrictions added for the non-unified
frontend can simply be disabled in unified mode.
Fixes#54497.
Change-Id: I8e6ac9f3393c588bfaf14c6452891b9640a9d1bd
Reviewed-on: https://go-review.googlesource.com/c/go/+/424775
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
As a consistency check in devirtualization, when we determine `i` (of
interface type `I`) always has dynamic type `T`, we insert a type
assertion `i.(T)`. This emits an itab check for `go:itab.T,I`, but
it's always true (and so SSA optimizes it away).
However, if `I` is instead the generic interface type `I[T]`, then
`go:itab.T,I[int]` and `go:itab.T,I[go.shape.int]` are equivalent but
distinct itabs. And notably, we'll have originally created the
interface value using the former; but the (non-dynamic) TypeAssertExpr
created by devirtualization would ultimately emit a comparison against
the latter. This comparison would then evaluate false, leading to a
spurious type assertion panic at runtime.
The comparison is just meant as an extra safety check, so it should be
safe to just disable. But for now, it's simpler/safer to just punt on
devirtualization in this case. (The non-unified frontend doesn't
devirtualize this either.)
Change-Id: I6a8809bcfebc9571f32e289fa4bc6a8b0d21ca46
Reviewed-on: https://go-review.googlesource.com/c/go/+/424774
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
This CL switches unified IR to use shape-based stenciling with runtime
dictionaries, like the existing non-unified frontend. Specifically,
when instantiating generic functions and types `X[T]`, we now also
instantiated shaped variants `X[shapify(T)]` that can be shared by
`T`'s with common underlying types.
For example, for generic function `F`, `F[int](args...)` will be
rewritten to `F[go.shape.int](&.dict.F[int], args...)`.
For generic type `T` with method `M` and value `t` of type `T[int]`,
`t.M(args...)` will be rewritten to `T[go.shape.int].M(t,
&.dict.T[int], args...)`.
Two notable distinctions from the non-unified frontend:
1. For simplicity, currently shaping is limited to simply converting
type arguments to their underlying type. Subsequent CLs will implement
more aggressive shaping.
2. For generic types, a single dictionary is generated to be shared by
all methods, rather than separate dictionaries for each method. I
originally went with this design because I have an idea of changing
interface calls to pass the itab pointer via the closure
register (which should have zero overhead), and then the interface
wrappers for generic methods could use the *runtime.itab to find the
runtime dictionary that corresponds to the dynamic type. This would
allow emitting fewer method wrappers.
However, this choice does have the consequence that currently even if
a method is unused and its code is pruned by the linker, it may have
produced runtime dictionary entries that need to be kept alive anyway.
I'm open to changing this to generate per-method dictionaries, though
this would require changing the unified IR export data format; so it
would be best to make this decision before Go 1.20.
The other option is making the linker smarter about pruning unneeded
dictionary entries, like how it already prunes itab entries. For
example, the runtime dictionary for `T[int]` could have a `R_DICTTYPE`
meta-relocation against symbol `.dicttype.T[go.shape.int]` that
declares it's a dictionary associated with that type; and then each
method on `T[go.shape.T]` could have `R_DICTUSE` meta-relocations
against `.dicttype.T[go.shape.T]+offset` indicating which fields
within dictionaries of that type need to be preserved.
Change-Id: I369580b1d93d19640a4b5ecada4f6231adcce3fd
Reviewed-on: https://go-review.googlesource.com/c/go/+/421821
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Updated multiple tests in test/codegen: math.go, mathbits.go, shift.go
and slices.go to verify on ppc64/ppc64le as well
Change-Id: Id88dd41569b7097819fb4d451b615f69cf7f7a94
Reviewed-on: https://go-review.googlesource.com/c/go/+/412115
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Archana Ravindar <aravind5@in.ibm.com>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Paul Murphy <murp@ibm.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
CL 414836 limited the check for implicit dot for method call enabled by
a type bound. However, the checking condition for ODOTMETH only is not
right. For example, for promoted method, we have a OXDOT node instead,
and we still have to check for implicit dot in this case.
However, if the base type and embedded types have the same method name,
e.g in issue #53419, typecheck.AddImplicitDots will be confused and
result in an ambigus selector.
To fix this, we ensure methods for the base type are computed, then only
do the implicit dot check if we can find a matched method.
Fixes#54348
Change-Id: Iefe84ff330830afe35c5daffd499824db108da23
Reviewed-on: https://go-review.googlesource.com/c/go/+/422274
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The issue is expected to be fixed when Unified IR is enabled by default,
so adding a test to make sure thing works correctly.
Updates #53702
Change-Id: Id9d7d7ca4506103df0d10785ed5ee170d69988ba
Reviewed-on: https://go-review.googlesource.com/c/go/+/423434
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
I structured the test for issue54343.go after issue46725.go, where I
was careful to use `[4]int`, which is a type large enough to avoid the
tiny object allocator (which interferes with finalizer semantics). But
in that test, I didn't note the importance of that type, so I
mistakenly used just `int` in issue54343.go.
This CL switches issue54343.go to use `[4]int` too, and then adds
comments to both pointing out the significance of this type.
Updates #54343.
Change-Id: I699b3e64b844ff6d8438bbcb4d1935615a6d8cc4
Reviewed-on: https://go-review.googlesource.com/c/go/+/423115
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: David Chase <drchase@google.com>
With GOEXPERIMENT=unified, the order variables are printed in "live at
entry to f.func1" is sensitive to whether regabi is enabled for some
reason. The order shouldn't matter to correctness, but it is odd.
For now, this CL just relaxes the test expectation order to unblock
enabling GOEXPERIMENT=unified by default. I've filed #54402 to
investigate further to confirm this a concern.
Updates #54402.
Change-Id: Iddfbb12c6cf7cc17b2aec8102b33761abd5f93ad
Reviewed-on: https://go-review.googlesource.com/c/go/+/422975
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
For selector expression "x.M" where "M" is a promoted method, irgen is using
the type of receiver "x" for determining the typeparams for instantiation.
However, because M is a promoted method, so its associated receiver is
not "x", but "x.T" where "T" is the embedded field of "x". That casues a
mismatch when converting non-shape types arguments.
Fixing it by using the actual receiver which has the method, instead of
using the base receiver.
Fixes#53982
Change-Id: I1836fc422d734df14e9e6664d4bd014503960bfc
Reviewed-on: https://go-review.googlesource.com/c/go/+/419294
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
This CL applies the same change to test/live.go that was previously
applied to test/live_regabi.go in golang.org/cl/415240. This wasn't
noticed at the time though, because GOEXPERIMENT=unified was only
being tested on linux-amd64, which is a regabi platform.
Change-Id: I0c75c2b7097544305e4174c2f5ec6ec283c81a8e
Reviewed-on: https://go-review.googlesource.com/c/go/+/422254
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
`go env GOEXPERIMENT` prints what experiments are enabled relative to
the baseline configuration, so it's not a very robust way to detect
what experiments have been statically enabled at bootstrap time.
Instead, we can check build.Default.ToolTags, which has goexperiment.*
for all currently enabled experiments, independent of baseline.
Change-Id: I6132deaa73b1e79ac24176ef4de5af67a507ee26
Reviewed-on: https://go-review.googlesource.com/c/go/+/422234
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
For signed comparisons, the following four optimization rules hold:
(CMPconst [0] z:(AND x y)) && z.Uses == 1 => (TST x y)
(CMPWconst [0] z:(AND x y)) && z.Uses == 1 => (TSTW x y)
(CMPconst [0] x:(ANDconst [c] y)) && x.Uses == 1 => (TSTconst [c] y)
(CMPWconst [0] x:(ANDconst [c] y)) && x.Uses == 1 => (TSTWconst [int32(c)] y)
But currently they only apply to jump instructions, not to conditional
instructions within a block, such as cset, csel, etc. This CL extends
the above rules into blocks so that conditional instructions can also be
optimized.
name old time/op new time/op delta
DivisiblePow2constI64-160 1.04ns ± 0% 0.86ns ± 0% -17.30% (p=0.008 n=5+5)
DivisiblePow2constI32-160 1.04ns ± 0% 0.87ns ± 0% -16.16% (p=0.016 n=4+5)
DivisiblePow2constI16-160 1.04ns ± 0% 0.87ns ± 0% -16.03% (p=0.008 n=5+5)
DivisiblePow2constI8-160 1.04ns ± 0% 0.86ns ± 0% -17.15% (p=0.008 n=5+5)
Change-Id: I6bc34bff30862210e8dd001e0340b8fe502fe3de
Reviewed-on: https://go-review.googlesource.com/c/go/+/420434
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Run-TryBot: Eric Fang <eric.fang@arm.com>
This CL adds a test that method expressions where the receiver type is
a derived type and embeds a promoted method work correctly.
Change-Id: I2e7c96007b6d9e6f942dc14228970ac508ff5c15
Reviewed-on: https://go-review.googlesource.com/c/go/+/422199
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The Go 1.18 frontend handles package-scope generic method values by
spilling the receiver value to a global temporary variable, which pins
it into memory. This issue isn't present in unified IR, which uses
OMETHVALUE when the receiver type is statically known.
Updates #54343.
Change-Id: I2c4ffeb125a3cf338f949a93b0baac75fff6cd31
Reviewed-on: https://go-review.googlesource.com/c/go/+/422198
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
As it can't appear in user package paths.
There is a hack for handling "go:buildid" and "type:*" on windows/386.
Previously, windows/386 requires underscore prefix on external symbols,
but that's only applied for SHOSTOBJ/SUNDEFEXT or cgo export symbols.
"go.buildid" is STEXT, "type.*" is STYPE, thus they are not prefixed
with underscore.
In external linking mode, the external linker can't resolve them as
external symbols. But we are lucky that they have "." in their name,
so the external linker see them as Forwarder RVA exports. See:
- https://docs.microsoft.com/en-us/windows/win32/debug/pe-format#export-address-table
- https://sourceware.org/git/?p=binutils-gdb.git;a=blob;f=ld/pe-dll.c;h=e7b82ba6ffadf74dc1b9ee71dc13d48336941e51;hb=HEAD#l972)
This CL changes "." to ":" in symbols name, so theses symbols can not be
found by external linker anymore. So a hacky way is adding the
underscore prefix for these 2 symbols. I don't have enough knowledge to
verify whether adding the underscore for all STEXT/STYPE symbols are
fine, even if it could be, that would be done in future CL.
Fixes#37762
Change-Id: I92eaaf24c0820926a36e0530fdb07b07af1fcc35
Reviewed-on: https://go-review.googlesource.com/c/go/+/317917
Reviewed-by: Than McIntosh <thanm@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Currently there is a an ANDconst and an ANDCCconst op in PPC64,
which is confusing since they map onto the same instruction.
One of these ops sets the result of the AND operation, and the
other sets the flag (condition register).
This converts ANDCCconst into an op with the 2 expected results:
the integer result of the AND and the flag setting. The ANDconst
op has been removed.
Note that in the PPC64 ISA the only variation of the 'and immediate'
is the one that sets the condition bit, which probably led to the
original (confusing) implementation.
This also adds a few rules to improve the use of ANDCCconst with
ISELB and some testcases to verify those improvements.
Change-Id: I523703fa4da2098eb995dc3ba744d36fa28e41d4
Reviewed-on: https://go-review.googlesource.com/c/go/+/422015
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Paul Murphy <murp@ibm.com>
When types2 type checks a method expression or method value that
selects a type parameter method, the Selection.Index is indexed based
on the method's index within the type parameter's constraint
interface.
However, with a fully-stenciled implementation, naively using the
index would result in picking a method from the corresponding type
argument's full method set, which could select a different method.
Unified IR currently avoids this because it selects methods based on
name, not index; but experimenting with index-based selection revealed
that there are no test cases that would have caught this failure case.
Change-Id: Idbc39e1ee741714203d4749e47f5bc015af25020
Reviewed-on: https://go-review.googlesource.com/c/go/+/421815
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
We don't need a multiply when the element type is size 0 or 1.
The panic functions don't return, so we don't need any post-call
code (register restores, etc.).
Change-Id: I0dcea5df56d29d7be26554ddca966b3903c672e5
Reviewed-on: https://go-review.googlesource.com/c/go/+/419754
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
There's no need for a and b to match types. The typechecker already
ensured that a and b are both slices with the same base type, or
a and b are (possibly named) []byte and string.
The optimization to treat append(b, make([], ...)) as a zeroing
slice extension doesn't fire when there's a OCONVNOP wrapping the make.
Fixes#53888
Change-Id: Ied871ed0bbb8e4a4b35d280c71acbab8103691bc
Reviewed-on: https://go-review.googlesource.com/c/go/+/418475
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
Same as CL 417555, but for cmd/compile.
Fixes#54220
Change-Id: I4cc6deaf0a87c952f636888b4ab73f81a44bfebd
Reviewed-on: https://go-review.googlesource.com/c/go/+/420975
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
The RType field isn't needed when performing type assertions from
non-empty interface types, because we use the ITab field instead. But
the inline body exporter didn't know to expect this.
It's possible we could use a single bool to distinguish whether
we're serializing the RType or ITab field, but using two is simpler
and seems safer.
Fixes#54302.
Change-Id: I9ddac72784fb2241fee0a0dee30493d868a2c259
Reviewed-on: https://go-review.googlesource.com/c/go/+/421755
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Merge List:
+ 2022-08-04 85d87b9c75 all: update vendored golang.org/x dependencies for Go 1.20 development
+ 2022-08-04 fb1bfd4d37 all: remove pre-Go 1.17 workarounds
+ 2022-08-04 44ff9bff0c runtime: clean up panic and deadlock lock ranks
+ 2022-08-04 f42dc0de74 runtime: make the lock rank DAG make more sense
+ 2022-08-04 d29a0282e9 runtime: add mayAcquire annotation for finlock
+ 2022-08-04 c5be4ed7df runtime: add missing trace lock edges
+ 2022-08-04 2b8a9a484f runtime: generate the lock ranking from a DAG description
+ 2022-08-04 ddfd639408 runtime: delete unused lock ranks
+ 2022-08-04 426ea5702b internal/dag: add a Graph type and make node order deterministic
+ 2022-08-04 d37cc9a8cd go/build, internal/dag: lift DAG parser into an internal package
+ 2022-08-04 ab0a94c6d3 cmd/dist: require Go 1.17 for building Go
+ 2022-08-04 1e3c19f3fe runtime: support riscv64 SV57 mode
+ 2022-08-03 f28fa952b5 make.bat, make.rc: show bootstrap toolchain version
+ 2022-08-03 87384801dc cmd/asm: update package doc to describe "-p" option
+ 2022-08-03 c6a2dada0d net: disable TestIPv6WriteMsgUDPAddrPortTargetAddrIPVersion [sic] on DragonflyBSD
+ 2022-08-02 29b9a328d2 runtime: trivial replacements of g in remaining files
+ 2022-08-02 c647264619 runtime: trivial replacements of g in signal_unix.go
+ 2022-08-02 399f50c9d7 runtime: tricky replacements of g in traceback.go
+ 2022-08-02 4509e951ec runtime: tricky replacements of g in proc.go
+ 2022-08-02 4400238ec8 runtime: trivial replacements of _g_ in remaining files
+ 2022-08-02 5999a28de8 runtime: trivial replacements of _g_ in os files
+ 2022-08-02 0e18cf6d09 runtime: trivial replacements of _g_ in GC files
+ 2022-08-02 4358a53a97 runtime: trivial replacements of _g_ in proc.go
+ 2022-08-02 b486518964 runtime: tricky replacements of _g_ in os3_solaris.go
+ 2022-08-02 54a0ab3f7b runtime: tricky replacements of _g_ in os3_plan9.go
+ 2022-08-02 4240ff764b runtime: tricky replacements of _g_ in signal_windows.go
+ 2022-08-02 8666d89ca8 runtime: tricky replacements of _g_ in signal_unix.go
+ 2022-08-02 74cee276fe runtime: tricky replacements of _g_ in trace.go
+ 2022-08-02 222799fde6 runtime: tricky replacements of _g_ in mgc.go
+ 2022-08-02 e9d7f54a1a runtime: tricky replacements of _g_ in proc.go
+ 2022-08-02 5e8d261918 runtime: rename _p_ to pp
+ 2022-08-02 0ad2ec6596 runtime: clean up dopanic_m
+ 2022-08-02 7e952962df runtime: clean up canpanic
+ 2022-08-02 9dbc0f3556 runtime: fix outdated g.m comment in traceback.go
+ 2022-08-02 d723df76da internal/goversion: update Version to 1.20
+ 2022-08-02 1b7e71e8ae all: disable tests that fail on Alpine
+ 2022-08-01 f2a9f3e2e0 test: improve generic type assertion test
+ 2022-08-01 27038b70f8 cmd/compile: fix wrong dict pass condition for type assertions
+ 2022-08-01 e99f53fed9 doc: move Go 1.19 release notes to x/website
+ 2022-08-01 8b13a073a1 doc: mention removal of cmd/compile's -importmap and -installsuffix flags
+ 2022-08-01 e95fd4c238 doc/go1.19: fix typo: EM_LONGARCH -> EM_LOONGARCH
+ 2022-08-01 dee3efd9f8 doc/go1.19: fix a few links that were missing trailing slashes
+ 2022-07-30 f32519e5fb runtime: fix typos
+ 2022-07-29 9a2001a8cc cmd/dist: always pass -short=true with -quick
+ 2022-07-28 5c8ec89cb5 doc/go1.19: minor adjustments and links
+ 2022-07-28 417be37048 doc/go1.19: improve the loong64 release notes
+ 2022-07-28 027855e8d8 os/exec: add GODEBUG setting to opt out of ErrDot changes
Change-Id: Idc0fbe93978c0dff7600b90a2c3ecc067fd9f5f2
The test added in CL 420394 only tested that the type assertions
compiled at all. This CL changes it into a run test to make sure the
type assertions compile and also run correctly.
Updates #54135.
Change-Id: Id17469faad1bb55ff79b0bb4163ef50179330033
Reviewed-on: https://go-review.googlesource.com/c/go/+/420421
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Fixes#54135
Change-Id: I2b27af8124014b2699ea44bdc765e1fb8f6c8028
Reviewed-on: https://go-review.googlesource.com/c/go/+/420394
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Merge List:
+ 2022-07-27 462b78fe70 misc/cgo/test: use fewer threads in TestSetgidStress in long mode
+ 2022-07-27 055113ef36 math/big: check buffer lengths in GobDecode
+ 2022-07-27 4248146154 net: document UDPConn.ReadFromUDPAddrPort's AddrPort result more
+ 2022-07-26 faf4e97200 net: fix WriteMsgUDPAddrPort addr handling
+ 2022-07-26 caa225dd29 doc/go1.19: note that updated race syso files require GNU ld 2.26
+ 2022-07-26 ceefd3a37b bytes: document that Reader.Reset affects the result of Size
+ 2022-07-26 3e97294663 runtime/cgo: use frame address to set g0 stack bound
+ 2022-07-25 24dc27a3c0 cmd/compile: fix blank label code
+ 2022-07-25 9fcc8b2c1e runtime: fix runtime.Breakpoint() on windows/arm64
+ 2022-07-25 795a88d0c3 cmd/go: add space after comma in 'go help test'
+ 2022-07-25 9eb3992ddd doc/go1.19: minor fixes
+ 2022-07-25 dcea1ee6e3 time: clarify documentation for allowed formats and add tests to prove them
+ 2022-07-25 37c8112b82 internal/fuzz: fix typo in function comments
+ 2022-07-25 850d547d2d doc/go1.19: expand crypto release notes
+ 2022-07-24 64f2829c9c runtime: fix typo in function comments
+ 2022-07-24 2ff563a00e cmd/compile/internal/noder: correct spelling errors for instantiation
+ 2022-07-22 c5da4fb7ac cmd/compile: make jump table symbol local
+ 2022-07-22 774fa58d1d A+C: delete AUTHORS and CONTRIBUTORS
+ 2022-07-21 2d655fb15a unsafe: document when Sizeof/Offsetof/Alignof are not constant
+ 2022-07-21 076c3d7f07 net/http: remove accidental heading in Head documentation
+ 2022-07-21 c4a6d3048b cmd/dist: enable race detector test on S390X
+ 2022-07-20 244c8b0500 cmd/cgo: allow cgo to pass strings or []bytes bigger than 1<<30
+ 2022-07-20 df38614bd7 test: use go tool from tree, not path
+ 2022-07-20 bb1749ba3b cmd/compile: improve GOAMD64=v1 violation test
+ 2022-07-19 176b63e711 crypto/internal/nistec,debug/gosym: fix typos
Change-Id: I96e5d60039381691dffd841e58927f0afff8c544
When checkEnabled is forced true, the 52278 test fails. Be a bit
more careful about processing blank labels.
Update #52278
Change-Id: I48aa89e2c9e3715d8efe599bc4363b5b5879d8a2
Reviewed-on: https://go-review.googlesource.com/c/go/+/419318
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
Some of our tests do exec.Command("go", "tool", "compile", ...) or
similar. That "go" is selected from PATH. When run.go is started
from the command line (but not from all.bash), the first "go" is whatever
happens to be first in the user's path (some random older version than
tip). We really want all these tests to use the "go" tool from the
source tree under test. Add GOROOT/bin to the front of the path to
ensure that the tools we use come from the source tree under test.
Change-Id: I609261a4add8cd5cb228316752d52b5499aec963
Reviewed-on: https://go-review.googlesource.com/c/go/+/418474
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The next CL will change Unified IR's switch statement handling to
convert values to empty interface in some tricky cases. My initial
attempt at this accidentally mishandled `case nil:` in some cases, and
this wasn't caught by any existing tests. So this CL adds one.
Change-Id: Idcfaf0e869dca91be46d665e65d4623dc52bb60f
Reviewed-on: https://go-review.googlesource.com/c/go/+/418099
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
In this test, traditionally the comparison `*l == r[0]` was left as a
comparison between `*l` (type `any`) and `r[0]` (type `*int`), and the
rest of the compiler needed to handle mixed-typed comparisons.
However, this means more complexity for wiring up explicit rtypes.
To simplify rtype handling, the next CL will change unified IR to
instead handle the expression as `*l == any(r[0])`. However, a
consequence of this currently is that walk will now sequence the
`any(r[0])` expression first, because it involves a
concrete-to-interface conversion. And in turn, this means the `r[0]`
panic ("index out of bounds") will take priority over the `*l`
panic ("nil pointer dereference").
This is a change in user-visible semantics in some cases, but the Go
spec leaves this unspecified, so it shouldn't be an issue. Note also:
gccgo has the same behavior (i.e., panicking on index out of bounds,
not nil pointer dereference), and cmd/compile also already has the
same behavior when the interface conversion is explicit (as in the
added "nil pointer dereference #3" test case).
Updates #23735.
Updates #32187.
Change-Id: I49e5dcca85b4680f9c8780ef0013e64254d38fe5
Reviewed-on: https://go-review.googlesource.com/c/go/+/418097
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
Conflicts:
- test/run.go
Conflicts in the known-fails list, plus removed a test from the known-fails that now works.
Merge List:
+ 2022-07-19 8e1e64c16a cmd/compile: fix mknode script
+ 2022-07-19 28be440d34 A+C: add Weizhi Yan
+ 2022-07-19 85a482fc24 runtime: revert to using the precomputed trigger for pacer calculations
+ 2022-07-19 ae7340ab68 CONTRIBUTORS: update for the Go 1.19 release
+ 2022-07-18 de8101d21b runtime: fix typos
+ 2022-07-18 967a3d985d cmd/compile: revert "remove -installsuffix flag"
+ 2022-07-18 c0c1bbde17 http: improve Get documentation
+ 2022-07-15 2aa473cc54 go/types, types2: correct alignment of atomic.Int64
+ 2022-07-15 4651ebf961 encoding/gob: s/TestIngoreDepthLimit/TestIgnoreDepthLimit/
+ 2022-07-14 dc00aed6de go/parser: skip TestParseDepthLimit for short tests
+ 2022-07-14 783ff7dfc4 encoding/xml: skip TestCVE202230633 for short tests
+ 2022-07-14 aa80228526 cmd/go/internal/modfetch: avoid duplicating path components in Git fetch errors
+ 2022-07-14 b9d5a25442 cmd/go: save zip sums for downloaded modules in 'go mod download' in a workspace
+ 2022-07-14 a906d3dd09 cmd/go: avoid re-enqueuing workspace dependencies with errors
+ 2022-07-14 266c70c263 doc/go1.19: add a release note for 'go list -json=SomeField'
+ 2022-07-13 558785a0a9 cmd/compile: remove -installsuffix flag
+ 2022-07-13 1355ea3045 cmd/compile: remove -importmap flag
+ 2022-07-13 f71f3d1b86 misc/cgo/testshared: run tests only in GOPATH mode
+ 2022-07-13 feada53661 misc/cgo/testcshared: don't rely on an erroneous install target in tests
+ 2022-07-13 c006b7ac27 runtime: clear timerModifiedEarliest when last timer is deleted
+ 2022-07-13 923740a8cc cmd/compile: fix type assert in dict pass
+ 2022-07-12 bf2ef26be3 cmd/go: in script tests, avoid checking non-main packages for staleness
+ 2022-07-12 5f5cae7200 cmd/go: avoid indexing GOROOT packages when the compiler is 'gccgo'
+ 2022-07-12 c2edb2c841 cmd/go: port TestIssue16471 to a script test and add verbose logging
+ 2022-07-12 9c2526e637 cmd/go/internal/modfetch/codehost: add missing newline in '# lock' log message
+ 2022-07-12 85486bcccb image/jpeg: increase TestLargeImageWithShortData timeout by an order of magnitude
+ 2022-07-12 27794c4d4a cmd/go/internal/modload: ignore disallowed errors when checking for updates
+ 2022-07-12 b2b8872c87 compress/gzip: fix stack exhaustion bug in Reader.Read
+ 2022-07-12 ac68c6c683 path/filepath: fix stack exhaustion in Glob
+ 2022-07-12 fa2d41d0ca io/fs: fix stack exhaustion in Glob
+ 2022-07-12 6fa37e98ea encoding/gob: add a depth limit for ignored fields
+ 2022-07-12 695be961d5 go/parser: limit recursion depth
+ 2022-07-12 08c46ed43d encoding/xml: use iterative Skip, rather than recursive
+ 2022-07-12 c4c1993fd2 encoding/xml: limit depth of nesting in unmarshal
+ 2022-07-12 913d05133c cmd/go: avoid spurious readdir during fsys.Walk
+ 2022-07-12 d3d7998756 net/http: clarify that MaxBytesReader returns *MaxBytesError
+ 2022-07-11 126c22a098 syscall: gofmt after CL 412114
+ 2022-07-11 123a6328b7 internal/trace: don't report regions on system goroutines
+ 2022-07-11 846490110a runtime/race: update amd64 syso images to avoid sse4
+ 2022-07-11 b75ad09cae cmd/trace: fix typo in web documentation
+ 2022-07-11 7510e597de cmd/go: make module index loading O(1)
+ 2022-07-11 b8bf820d5d cmd/nm: don't rely on an erroneous install target in tests
+ 2022-07-11 ad641e8521 misc/cgo/testcarchive: don't rely on an erroneous install target in tests
+ 2022-07-11 bf5898ef53 net/url: use EscapedPath for url.JoinPath
+ 2022-07-11 398dcd1cf0 database/sql: make TestTxContextWaitNoDiscard test more robust
+ 2022-07-11 f956941b0f cmd/go: use package index for std in load.loadPackageData
+ 2022-07-11 59ab6f351a net/http: remove Content-Encoding in writeNotModified
+ 2022-07-08 c1a4e0fe01 cmd/compile: fix libfuzzer instrumentation line number
+ 2022-07-08 5c1a13e7a4 cmd/go: avoid setting variables for '/' and ':' in TestScript subprocess environments
+ 2022-07-08 180bcad33d net/http: wait for listeners to exit in Server.Close and Shutdown
+ 2022-07-08 14abe8aa73 cmd/compile: don't convert to interface{} for un-comparable types in generic switch
+ 2022-07-07 1ebc983000 runtime: overestimate the amount of allocated memory in heapLive
+ 2022-07-07 c177d9d98a crypto/x509: restrict CRL number to <=20 octets
+ 2022-07-07 486fc01770 crypto/x509: correctly parse CRL entry extensions
+ 2022-07-07 8ac58de185 crypto/x509: populate Number and AKI of parsed CRLs
+ 2022-07-07 0c7fcf6bd1 cmd/link: explicitly disable PIE for windows/amd64 -race mode
+ 2022-07-07 eaf2125654 cmd/go: default to "exe" build mode for windows -race
+ 2022-07-06 1243ec9c17 cmd/compile: only check implicit dots for method call enabled by a type bound
+ 2022-07-06 c391156f96 cmd/go: set up git identity for build_buildvcs_auto.txt
+ 2022-07-06 2acd3646fc cmd/compile: rework induction variable detector
+ 2022-07-06 53a4152d47 os/exec: clarify that Wait must be called
+ 2022-07-06 177306f630 cmd/internal/notsha256: add purego tag as needed
+ 2022-07-06 f4755fc733 cmd/dist: use purego tag when building the bootstrap binaries
+ 2022-07-06 4484c30f78 misc/cgo/test: make TestSetgidStress cheaper
+ 2022-07-06 2007599dc8 test: recognize new gofrontend error message
+ 2022-07-05 d602380f58 cmd/compile: drop "buildcfg" from no instrument packages
+ 2022-07-05 c111091071 cmd/go: make module@nonexistentversion failures reusable
+ 2022-07-05 5f305ae8e5 cmd/go: add -reuse flag to make proxy invocations more efficient
+ 2022-07-05 84e091eef0 cmd/go: record origin metadata during module download
+ 2022-07-04 ceda93ed67 build/constraint: update doc to mention a feature added in Go 1.17
+ 2022-07-04 3cf79d9610 runtime: pass correct string to exits on Plan 9
+ 2022-07-01 e822b1e26e net/http: omit invalid header value from error message
+ 2022-07-01 4a2a3bca18 cmd/go, go/build: clarify build constraint docs
+ 2022-07-01 9a4d5357f4 flag: highlight support for double dashes in docs
+ 2022-07-01 c847a2c9f0 go/types, types2: document that exported predicates are unspecified for invalid type arguments
+ 2022-06-30 405c269b85 go/types, types2: re-enable a couple of commented out tests
+ 2022-06-30 aad9382e59 go/doc/comment: support links in lists in comments
+ 2022-06-30 af725f4286 os: fix a typo in path_windows.go
Change-Id: I381728322188aca0bfa81a946d6aedda8c07903c
In filenames, macOS translates Ä (U+00c4, c3 84) to Ä (U+0041 U+0308, 41 cc 88).
This causes problems for run.go's crude rules for testing the compiler.
Fixes#53954.
Change-Id: I850421cbf07e022ca5ff8122e0fb4e80deb55adf
Reviewed-on: https://go-review.googlesource.com/c/go/+/418334
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
For type assertions, if src type is empty interface, we should
use normal type assertions rather than dynamic type assertions.
Fixes#53762
Change-Id: I596b2e4ad647fe5e42ad884f7273c78f8f50dac2
Reviewed-on: https://go-review.googlesource.com/c/go/+/416736
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Induction variable detection is still not quite right. I've added
another failing test.
Redo the overflow/underflow detector so it is more obviously correct.
Update #53600Fixes#53653Fixes#53663
Change-Id: Id95228e282fdbf6bd80b26e1c41d62e935ba08ff
Reviewed-on: https://go-review.googlesource.com/c/go/+/415874
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: David Chase <drchase@google.com>
The new gofrontend message matches other gofrontend error messages,
so adjust the test to accept it.
For #27938
For #51237
Change-Id: I29b536f83a0cf22b1dbdae9abc2f5f6cf21d522d
Reviewed-on: https://go-review.googlesource.com/c/go/+/416014
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Conflicts:
- test/run.go: textual conflict in 1.18 known failures list
Merge List:
+ 2022-06-30 993c387032 os: simplify deadline fluctuation tests
+ 2022-06-30 4914e4e334 cmd/go/internal/modindex: remove spurious field from index_format documentation
+ 2022-06-30 981d5947af cmd/go: include module root in package index key
+ 2022-06-30 84db00ffd1 cmd/go: add a 'sleep' command for script tests
+ 2022-06-30 31b8c23c57 cmd/compile: fix prove pass when upper condition is <= maxint
+ 2022-06-30 17083a2fdf spec: retitle section on "Assignments" to "Assignment statements"
+ 2022-06-30 4d95fe6653 test: add regress test for #53619
+ 2022-06-29 6a7c64fde5 debug/pe: add IMAGE_FILE_MACHINE_LOONGARCH{64,32}
+ 2022-06-29 b2cc0fecc2 net/http: preserve nil values in Header.Clone
+ 2022-06-29 64ef16e777 cmd/internal/obj/arm64: save LR and SP in one instruction for small frames
+ 2022-06-29 0750107074 go/token: use atomics not Mutex for last file cache
+ 2022-06-29 e5017a93fc net/http: don't strip whitespace from Transfer-Encoding headers
+ 2022-06-29 20760cff00 runtime: add race annotations to cbs.lock
+ 2022-06-29 e6c0546c54 crypto/x509/pkix: move crl deprecation message
+ 2022-06-29 3562977b6f cmd/internal/obj/mips,s390x,riscv: save LR after decrementing SP
+ 2022-06-29 d6481d5b96 runtime: add race annotations to metricsSema
+ 2022-06-29 bd1783e812 crypto/x509: improve RevocationList documentation
+ 2022-06-28 160414ca6a cmd/internal/obj/arm64: fix BITCON constant printing error
+ 2022-06-28 a30f434667 cmd/go: pass --no-decorate when listing git tags for a commit
+ 2022-06-28 3580ef9d64 os/exec: on Windows, suppress ErrDot if the implicit path matches the explicit one
+ 2022-06-28 34f3ac5f16 cmd/compile: fix generic inter-inter comparisons from value switch statements
+ 2022-06-28 7df0a002e6 cmd/go/internal/modfetch: cache latest revinfo in Versions func
+ 2022-06-28 d5bf9604aa test: add more tests for const decls with ommitted RHS expressions
+ 2022-06-28 533082d1a0 test: add test that gofrontend failed to compile
+ 2022-06-28 47e792e22e runtime: clean up unused function gosave on loong64
+ 2022-06-28 a6e5be0d30 cmd/go: omit build metadata that may contain system paths when -trimpath is set
+ 2022-06-28 d3ffff2790 api: correct debug/pe issue number for Go 1.19 changes
+ 2022-06-28 751cae8855 cmd/go/internal/modload: fix doc comment
+ 2022-06-28 85d7bab91d go/printer: report allocs and set bytes
+ 2022-06-27 3af5280c00 net: really skip Windows PTR tests if we say we are skipping them
+ 2022-06-27 a42573c2f1 net: avoid darwin/arm64 platform bug in TestCloseWrite
+ 2022-06-27 68289f39f0 html/template: fix typo in content_test.go
+ 2022-06-27 c3bea70d9b cmd/link: link against libsynchronization.a for -race on windows
+ 2022-06-27 f093cf90bf test: add test that caused gofrontend crash
+ 2022-06-27 155612a9b9 test: add test that caused gofrontend crash
+ 2022-06-27 a861eee51a cmd/go: compile runtime/internal/syscall as a runtime package
+ 2022-06-27 8f9bfa9b7b crypto/internal/boring: factor Cache into crypto/internal/boring/bcache
+ 2022-06-26 351e0f4083 runtime: avoid fma in mkfastlog2table
+ 2022-06-26 416c953960 test: add test that gofrontend gets wrong
+ 2022-06-26 666d736ecb cmd/compile: do branch/label checks only once
+ 2022-06-26 6b309be7ab cmd/compile/internal/syntax: check fallthrough in CheckBranches mode
+ 2022-06-25 1821639b57 runtime: mark string comparison hooks as no split
+ 2022-06-25 3b594b9255 io: clarify SeekEnd offset value
+ 2022-06-25 4f45ec5963 cmd/go: prepend builtin prolog when checking for preamble errors
+ 2022-06-24 41e1d9075e strconv: avoid panic on invalid call to FormatFloat
+ 2022-06-24 bd4753905d internal/trace: add Go 1.19 test data
+ 2022-06-24 6b6c64b1cc cmd/internal/archive: don't rely on an erroneous install target in tests
Change-Id: Ib43126833bf534c311730d4283d4d25381cd3428
This CL changes GOEXPERIMENT=unified to insert implicit conversions
for multi-valued expressions.
Unfortunately, IR doesn't have strong, first-class support for
multi-valued expressions, so this CL takes the approach of spilling
them to temporary variables, which can then be implicitly converted.
This is the same approach taken by walk, but doing it this early does
introduce some minor complications:
1. For select case clauses with comma-ok assignments (e.g., `case x,
ok := <-ch:`), the compiler middle end wants to see the OAS2RECV
assignment is the CommClause.Comm statement. So when constructing
select statements, we need to massage this around a little.
2. The extra temporary variables and assignments skew the existing
inlining heuristics. As mentioned, the temporaries/assignments will
eventually be added (and often optimized away again) anyway, but now
they're visible to the inliner. So this CL also kludges the inlining
heuristics in this case to keep things comparable.
Change-Id: I3e3ea756ad92472ebe28bae3963be61ed7684a75
Reviewed-on: https://go-review.googlesource.com/c/go/+/415244
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
A subsequent CL will change Unified IR to emit extra temporary
variables for multi-value expressions, because they're sometimes
necessary for handling implicit conversions.
A consequence of this is that:
_, ok := m[""]
will be rewritten into:
autotmp_1, autotmp_2 := m[""]
_, ok := autotmp_1, autotmp_2
As the comment in nilcheck.go says, we don't want this code sequence
to emit any nil checks, and it doesn't either way. But only the second
form results in the compiler reporting "removed nil check", and I
can't make sense of why.
Rather than splitting this test case into separate unified and
nounified variants, it seems easier to just tweak the test case to the
more complex form and verify that we correctly remove the nil check
still.
Change-Id: I6a9266db933b201352d52da4d403a330fdeac48b
Reviewed-on: https://go-review.googlesource.com/c/go/+/415242
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
The assignment `sink, *(&ok) = y.(int)` should (and does) escape a
value to the heap, but this detail is missed because the implicit
conversion of the multi-value expression `y.(int)` isn't visible to
escape analysis (because it's not inserted until desugaring during
walk).
For Unified IR, I plan to apply this desugaring earlier (because it's
necessary for correct dictionary handling), which means we'll
now (correctly) report the heap escape.
Due to limitations of the $GOROOT/test harness, the easiest way to
handle that GOEXPERIMENT=unified gets this right while
GOEXPERIMENT=nounified does not is to split the test case into
separate files. Hence this CL.
Change-Id: I91f3a6c015cbc646ab018747e152cac2874cf24c
Reviewed-on: https://go-review.googlesource.com/c/go/+/415241
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Unified IR will soon introduce additional temporary variables for
multi-valued expressions, which cause this test to start failing.
However, according to the comment on lines 594--596, we don't care
what temporaries are printed on the noisy lines, just that they're not
mentioned on the printnl lines.
This CL relaxes the test expectations so that temporaries are allowed
to be live at the call to fb38() too, not just the calls to fi38() and
fc38().
Change-Id: Ia6c5f28ccf760fd8890a4313fb0d9f0eb9850bba
Reviewed-on: https://go-review.googlesource.com/c/go/+/415240
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
When the terminating condition is <= X, we need to make sure that
X+step doesn't overflow.
Fixes#53600
Change-Id: I36e5384d05b4d7168e48db6094200fcae409bfe5
Reviewed-on: https://go-review.googlesource.com/c/go/+/415219
Reviewed-by: Than McIntosh <thanm@google.com>
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Works with cmd/compile, but fails with gccgo currently.
Updates #53619.
Change-Id: I787faa9584cc33bd851c9cc8f146c91f4eb36fc9
Reviewed-on: https://go-review.googlesource.com/c/go/+/415238
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
The Go 1.18 frontend ICEs on select case clauses that involve an
implicit conversion.
Change-Id: I1c0865bf97d8b0a8fbddb0da43333e909df0d38a
Reviewed-on: https://go-review.googlesource.com/c/go/+/414878
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
If value is a non-empty interface and has shape, we still need to
convert it to an interface{} first.
Fixes#53477
Change-Id: I516063ba4429a6cc24c483758387ec13815fc63e
Reviewed-on: https://go-review.googlesource.com/c/go/+/414834
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Add analogous tests to go/types and types2 test suites.
Make sure "assert" built-in is available in type-checker
tests.
For #49157.
For #53585.
Change-Id: I092901ecb43eb4833c09bd8f5e38efbe0285babe
Reviewed-on: https://go-review.googlesource.com/c/go/+/414795
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
For #51475
Change-Id: Ie1b27304687225194a323dc8305e5d62578fff4f
Reviewed-on: https://go-review.googlesource.com/c/go/+/414755
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
For #52871
Change-Id: Id6102222a8b1ec8a84b716425bed0e349c65dbc4
Reviewed-on: https://go-review.googlesource.com/c/go/+/414336
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
The gofrontend crashed importing a complex 0 constant.
For #52862
Change-Id: Ia87d8eadb9c5ddf51e1cd65c1a626f05f0d068d4
Reviewed-on: https://go-review.googlesource.com/c/go/+/413980
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
For #52856
Change-Id: Iab3e8352f64d774058391f0422cd01c53c3e711d
Reviewed-on: https://go-review.googlesource.com/c/go/+/414235
Reviewed-by: Robert Griesemer <gri@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Fixes#50788.
Change-Id: Id1ed7d9c0687e3005e28598373fd5634178c78ca
Reviewed-on: https://go-review.googlesource.com/c/go/+/413895
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
For #52846
Change-Id: I763f81def97b53277396c123c524f7b8193ea35e
Reviewed-on: https://go-review.googlesource.com/c/go/+/413694
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
We sometimes use 16-byte load+store to move values around in memory.
In rare circumstances, the loaded value must be spilled because the
store can't happen yet.
In that case, we need to be able to spill the 16-byte value.
Fixes#53454
Change-Id: I09fd08e11a63c6ba3ef781d3f5ede237e9b0132e
Reviewed-on: https://go-review.googlesource.com/c/go/+/413294
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
This test already passes for GOEXPERIMENT=unified; add regress test to
ensure it stays that way.
Updates #53477.
Change-Id: Ib7aa7428260595077052207899edcc044a6ab1c8
Reviewed-on: https://go-review.googlesource.com/c/go/+/413394
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: David Chase <drchase@google.com>
For unsafe.{Alignof,Offsetof,Sizeof}, subster will transform them them
to OLITERAL nodes, and discard their arguments. However, any closure in
their children nodes were already processed and added to declaration
queue. Thus, we lack of information for generating instantiation for
the closure.
To fix it, just skip substituting the closures if we are going to edit
the children nodes of unsafe builtins.
Fixes#53390
Change-Id: Ia815cd05af9dc0491f10faac4399f378ac53dec6
Reviewed-on: https://go-review.googlesource.com/c/go/+/412794
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This currently works with GOEXPERIMENT=unified. Add a regress test to
make sure it stays that way.
Updates #53419.
Change-Id: I2ea1f9039c59807fbd497d69a0420771f8d6d035
Reviewed-on: https://go-review.googlesource.com/c/go/+/413014
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Merge List:
+ 2022-06-16 635b1244aa cmd/go: pass GOEXPERIMENT through to subtests
+ 2022-06-16 ef808ae1d4 expvar: don't crash if map value set to nil
+ 2022-06-16 32510eea74 go/parser: remove unused method checkBinaryExpr
+ 2022-06-16 74f1fa6ecb cmd/go: parallelize matchPackages work in each module
+ 2022-06-16 1d9d99b7ce cmd/link: consider alignment in carrier symbol size calculation
+ 2022-06-16 bcce8ef498 spec: adjust incorrect sentence in section on rune literals
+ 2022-06-16 ecc268aa26 test: add test that gofrontend fails
+ 2022-06-15 b6c1606889 internal/goarch, internal/goos: update generators for syslist.go
+ 2022-06-15 91baf5cecc reflect: fix reference comment to runtime/map.go
+ 2022-06-15 0e3d0c9581 syscall: clarify Pdeathsig documentation on Linux
+ 2022-06-15 74bf90c779 go/types, types2: add test case for issue for coverage
+ 2022-06-15 0cd0c12f57 doc/go1.19: use matching closing tag in unix build constraint heading
+ 2022-06-15 97bfc77f38 syscall, runtime/internal/syscall: always zero the higher bits of return value on linux/loong64
+ 2022-06-15 937fa5000a net/netip: add missing ) in ParsePrefix errors
+ 2022-06-15 c2c76c6f19 cmd/link: set alignment for carrier symbols
+ 2022-06-15 36147dd1e8 cmd/go/internal/modindex: disable indexing for modules outside GOROOT and the module cache
+ 2022-06-15 2a78e8afc0 test: add tests for string/[]byte/[]rune conversions
+ 2022-06-15 f9c0264107 net: avoid infinite recursion in Windows Resolver.lookupTXT
+ 2022-06-14 0dffda1383 spec: clarify "slice of bytes" and "slice of runes" through examples
+ 2022-06-14 c22a6c3b90 reflect: when StructOf overflows computing size/offset, panic
+ 2022-06-14 e1e66a03a6 cmd/compile,runtime,reflect: move embedded bit from offset to name
+ 2022-06-14 cb9bf93078 cmd/go: quote package directory when calling glob
+ 2022-06-14 cad477c922 cpu: fix typos in test case
+ 2022-06-13 c29be2d41c runtime: add HACKING section on nosplit functions
+ 2022-06-13 c5be77b687 doc/go1.19: minor edits
+ 2022-06-13 56bc3098f4 sync: improve linearity test robustness
+ 2022-06-13 1fe2810f9c sync: move lock linearity test and treat it like a performance test
+ 2022-06-13 6130461149 internal/testmath: add two-sample Welch's t-test for performance tests
+ 2022-06-13 24b9039149 doc/go1.19: prefer relative links to other parts of the Go website
+ 2022-06-13 fbc75dff2f cmd/cgo: remove -fsanitize=hwaddress hardware tags
+ 2022-06-13 5ee939b819 spec: clarify behavior of map size hint for make built-in
+ 2022-06-13 4703546a29 spec: add missing optional type arguments after TypeName in syntax
+ 2022-06-13 2c52465cb3 net: avoid darwin_arm64 bug in TestDialParallelSpuriousConnection
+ 2022-06-13 9228d7d7d5 doc/go1.19: add a release note for module indexing
+ 2022-06-13 7eeec1f6e4 cmd/compile: fix missing dict pass for type assertions
+ 2022-06-13 d27128b065 doc/go1.19: fix crypto tags
+ 2022-06-10 55590f3a2b net/http: doc: update RFC reference for appropriate HTTP codes
+ 2022-06-10 ff3db8d12d doc: fix typos in Go memory model
+ 2022-06-10 fb75c2da91 cmd/dist, cmd/internal/metadata: don't install metadata binary
+ 2022-06-10 386245b68e runtime: fix stack split at bad time when fuzzing
+ 2022-06-09 2cfbef4380 cmd/cgo: recognize clang 14 DWARF type names
+ 2022-06-09 c7ccabf3fe runtime/cgo: retry _beginthread on EACCES
+ 2022-06-09 91019cc13d runtime/cgo: merge bodies of cgo_sys_thread_start on windows
+ 2022-06-09 840e99ed74 api: promote next to go1.19
+ 2022-06-09 1a2ca95ad2 go/types, types2: only set instance context if packages match
+ 2022-06-08 b51d44c6dd cmd/go/testdata/script: fix skip on list_replace_absolute_windows
+ 2022-06-08 80f86f706d api/next: minor reformat
+ 2022-06-08 13f6be2833 runtime: use pidleget for faketime jump
+ 2022-06-08 1292176bc9 cmd/go: clean paths before using them form index functions
+ 2022-06-08 1858ea5d85 syscall: remove unused setgroups on linux/loong64
+ 2022-06-08 bdde41e3ba runtime: skip TestGdbBacktrace on gdb bug
+ 2022-06-08 432158b69a net: fix testHookDialTCP race
+ 2022-06-08 899f0a29c7 cmd/go: enable module index by default
+ 2022-06-08 f862280e30 cmd/go: properly call PackageModuleRoot to get modroot for index
+ 2022-06-08 d65166024f cmd/go: set Root and target fields for packages in GOPATH
+ 2022-06-08 4afb0b9e53 doc/go1.19: delete remaining TODOs
+ 2022-06-08 3426b7201d runtime: gofmt
+ 2022-06-08 f330a3a987 doc/go1.19: complete most remaining TODOs
+ 2022-06-08 2882786bf4 runtime: remove unused pipe and setNonblock on linux/loong64
+ 2022-06-08 decdd87bea doc/go1.19: mention riscv64 supported regabi
+ 2022-06-07 b72a6a7b86 os: document that Chdir affects fs.FS returned by DirFS with a relative path
+ 2022-06-07 30b929b1ef syscall: remove unused accept on linux/loong64
+ 2022-06-07 a7551fe245 net: use synthetic network in TestDialParallel
+ 2022-06-07 19d71acd97 doc/go1.19: document that the assembler requires -p
+ 2022-06-07 d151134851 doc/go1.19: document linker CL that switches DWARF compressed section format
+ 2022-06-07 3507805bcd go/types, types2: better error message for invalid use of constraint type
+ 2022-06-07 269bf7e855 go/types, types2: better error message if type is not in type set
+ 2022-06-07 d4fb93be87 go/types, types2: use | rather than ∪ when printing term lists
+ 2022-06-07 346698eea7 doc/go1.19: add release notes for net/http and net/url
+ 2022-06-07 7a82c6859f doc/go1.19: adjust runtime release notes
+ 2022-06-07 f3e051a184 runtime: document GOMEMLIMIT in environment variables section
+ 2022-06-07 ef2567c7dd doc/go1.19: document loong64 port
+ 2022-06-07 69bb7c6ef5 sync/atomic: clarify that 8-byte alignment of variables is due to escape
+ 2022-06-07 81033fbd8e doc/go1.19: some platforms are still on TSAN v2
+ 2022-06-07 0c3a0543c2 doc/go1.19: compiler section is complete, modulo TODOs
+ 2022-06-07 835a946137 doc/go1.19: minor edits
+ 2022-06-07 429a4041eb doc/go1.19: complete TODOs for go/types
+ 2022-06-07 d2630aa4b2 doc/go1.19: add various crypto release notes
+ 2022-06-07 77d9252ddf runtime: fix inline assembly trampoline for arm64
+ 2022-06-07 38607c5538 cmd/link: specify -Wl,-z params as documented
+ 2022-06-07 95b68e1e02 doc/go1.19: delete boringcrypto TODO
+ 2022-06-07 a79623b019 doc/go1.19: add more TODOs from updated relnote
+ 2022-06-06 acfff42802 doc/go1.19: add release notes for the soft memory limit and idle GC
+ 2022-06-06 a71ca3dfbd runtime, sync, sync/atomic: document happens-before guarantees
+ 2022-06-06 3651a6117e go/doc/comment: add heuristics for common badly formatted comments
+ 2022-06-06 4c08260c51 doc/go_mem: update revision date
+ 2022-06-06 7271a0a287 doc/go1.19: gc requires -p=importpath
+ 2022-06-06 c1e2ecbaf9 doc/go1.19: document Resolver.PreferGo
+ 2022-06-06 11195c60e6 cmd/go: use index to match packages in dependency modules
+ 2022-06-06 ea5d7cbc26 all: boringcrypto post-merge cleanup
+ 2022-06-06 6c7b223c2b go/doc/comment: do not turn ``` into “`
+ 2022-06-06 ce757e94e0 go/doc/comment: add doc comment
+ 2022-06-06 95547aee8c cmd/compile: cast riscv64 rewrite shifts to unsigned int
+ 2022-06-06 d43ddc1f3f strconv: fix typo in atof.go
+ 2022-06-06 2fa45a4fcd cmd/link/internal/loadpe: handle _main reference properly
+ 2022-06-06 fc97075949 go/types, types2: simplify implementation of validType (fix TODO)
+ 2022-06-06 07eca49055 go/types, types2: use type nest to detect type cycles (fix validType)
+ 2022-06-06 770146d5a8 doc/go1.19: add TODOs for changes to go/types
+ 2022-06-06 1b8ca75eaa runtime: fix breakpoint in ppc64x
+ 2022-06-06 9ce28b518d text/template/parse: fix data race on lexer initialization
+ 2022-06-06 47e34ca533 go/types, types2: ensure that named types never expand infinitely
+ 2022-06-06 02e69cfa96 go/types, types2: store Named instance information separately
+ 2022-06-06 1323b0e8f0 go/types, types2: eliminate methodList in favor of just using Named.mu
+ 2022-06-06 846f971daa go/types, types2: remove Named.once in favor of monotonic state
+ 2022-06-06 66cbf67345 cmd/buildid: reject rewriting legacy buildids
+ 2022-06-04 47f806ce81 strconv: clarify ParseFloat accepts Go syntax for float literals
+ 2022-06-04 2730c6af9f runtime: fix typo in libfuzzer_arm64.s
+ 2022-06-04 a32a592c8c database/sql/driver: fix typo in driver.go
+ 2022-06-04 0293c51bc5 regexp: avoid copying each instruction executed
+ 2022-06-04 865911424d doc: update Go memory model
+ 2022-06-04 fc66cae490 doc/go1.19: remove TODO about LimitedReader
+ 2022-06-04 f8a53df314 io: revert: add an Err field to LimitedReader
+ 2022-06-04 21f05284c7 cmd/go: index standard library packages
Change-Id: Ia7595c77a555fd2a0e7bb3b6b2cfbb745bd4947b
For #52870
Change-Id: Ic0791af4283c9e426f7cbfab0514517ff84cfa80
Reviewed-on: https://go-review.googlesource.com/c/go/+/412535
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Unified IR records the inline nodes position right at the position of
the inline call, while the old inliner always records at the position of
the original nodes.
We want to keep non-unified working up through go 1.20, thus this CL
extract the inline test case that is different in Unified IR and the old
inliner.
Updates #53058
Change-Id: I14b0ee99fe797d34f27cfec068982790c64ac263
Reviewed-on: https://go-review.googlesource.com/c/go/+/411935
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Matches examples in spec section on string conversions.
For #23814.
Change-Id: I08099c27bfdb98735868266f5a42901321b97b56
Reviewed-on: https://go-review.googlesource.com/c/go/+/412095
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
This change moves test/locklinear.go into the sync package tests, and
adds a bit of infrastructure since there are other linearity-checking
tests that could benefit from it too. This infrastructure is also
different than what test/locklinear.go does: instead of trying really
hard to get at least one success, we instead treat this like a
performance test and look for a significant difference via a t-test.
This makes the methodology behind the tests more rigorous, and should
reduce flakiness as transient noise should produce an insignificant
result. A follow-up CL does more to make these tests even more robust.
For #32986.
Change-Id: I408c5f643962b70ea708930edb4ac9df1c6123ce
Reviewed-on: https://go-review.googlesource.com/c/go/+/411396
Reviewed-by: Michael Pratt <mpratt@google.com>
For type assertions, if either src or dst type has shape, we must
convert them to dynamic type assertions.
Fixes#53309
Change-Id: Ia3362fa67c011febcbdb5b26f856d081b5c366de
Reviewed-on: https://go-review.googlesource.com/c/go/+/411617
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
These two tests fail with the 1.18 compiler frontend, because of
incomplete dictionary support. This CL adds the tests for Unified IR,
which currently handles them correctly, to make sure it doesn't repeat
the same errors.
Updates #53276.
Updates #53328.
Change-Id: I9f436495d28f2bc5707a17bd2527c86abacf91f1
Reviewed-on: https://go-review.googlesource.com/c/go/+/411695
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
For constants literal, iimport/iexport read/write them as basic literal
nodes. So they are printed in diagnostic message as Go syntax. So "foo"
will be reported as string("foo").
Unified IR read/write the raw expression as string value, and when
printed in diagnostic, the string value is written out exactly as-is, so
"foo" will be written as "foo".
Thus, this CL relax the test in issue7921.go to match the string value only.
Updates #53058
Change-Id: I6fcf4fdcfc4b3be91cb53b081c48bd57186d8f35
Reviewed-on: https://go-review.googlesource.com/c/go/+/410795
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
CL 410343 changes Unified IR to visit LHS before RHS/X in assign/for
statement. Thus, it needs to set base.Pos before processing assignee
expression, so invalid type can be reported with correct position.
Updates #53058
Change-Id: Ic9f60cbf35c8bd71cb391e806396572c37811af7
Reviewed-on: https://go-review.googlesource.com/c/go/+/410794
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
For error reported during type size calculation, base.Pos needs to be
set, otherwise, the compiler will treat them as the same error and only
report once. Old typechecker and irgen all set base.Pos before
processing types, this CL do the same thing for unified IR.
Updates #53058
Change-Id: I686984ffe4aca3e8b14d2103018c8d3c7d71fb02
Reviewed-on: https://go-review.googlesource.com/c/go/+/410345
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
CL 333109 restore the diagnostic for irgen, now it's safe to restore for
Unified IR, too.
Updates #53058
Change-Id: I467902c0e9fa451aaa78cf0813231f14d9d7a3a0
Reviewed-on: https://go-review.googlesource.com/c/go/+/410346
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
So they can be formatted more presicely, and make it easier in the
transition to Unified IR.
Updates #53058
Change-Id: I8b5a46db05a2e2822289458995b8653f0a3ffbbe
Reviewed-on: https://go-review.googlesource.com/c/go/+/410594
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Unified IR uses to generate wrappers after the global inlining pass, so
it needs to apply inlining for the wrappers itself. However, inlining
may reveal new method value nodes which have not been seen yet, thus
unified IR never generates wrappers for them.
To fix it, just visiting the wrapper function body once more time after
inlining, and generate wrappers for any new method value nodes.
Fixes#52128
Change-Id: I78631c4faa0b00357d4f84704d3525fd38a52cd7
Reviewed-on: https://go-review.googlesource.com/c/go/+/410344
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
For instantiated generic functions, all implicit dot operations are
resolved. Thus unsafe.Offsetof may calculating the offset against the
wrong base selector.
To fix it, we must remove any implicit dot operations to find the first
non-implicit one, which is the right base selector for calculating the
offset.
Fixes#53137
Change-Id: I38504067ce0f274615b306edc8f7d7933bdb631a
Reviewed-on: https://go-review.googlesource.com/c/go/+/409355
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
As far as I can tell, this test suffers from #52433. For some reason,
this seems to become more of a problem on the windows/386 than anywhere
else. This CL is an attempt at a mitigation by slowing down the
allocation rate by inserting runtime.Gosched call in the inner loop. It
also cuts the iteration count which should help too (as less memory is
allocated in total), but the main motivation is to make sure the test
doesn't take too long to run.
Fixes#49564.
Change-Id: I8cc622b06a69cdfa66f680a30e1ccf334eea2164
Reviewed-on: https://go-review.googlesource.com/c/go/+/408825
Reviewed-by: Bryan Mills <bcmills@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
If a function type has no type parameters, note when it
is visited and do not recur. (It must be visited
at least once because of closures and their associated
types occurring in a generic context).
Fixes#51832.
Change-Id: Iee20612ffd0a03b838b9e59615f4a0206fc8940b
Reviewed-on: https://go-review.googlesource.com/c/go/+/406714
Reviewed-by: Keith Randall <khr@google.com>
The divisor must be non-zero for the rule to be triggered.
Fixes#53018
Change-Id: Id56b8d986945bbb66e13131d11264ee438de5cb2
Reviewed-on: https://go-review.googlesource.com/c/go/+/407655
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Auto-Submit: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Reviewed-by: xiaodong liu <teaofmoli@gmail.com>
Reviewed-by: WANG Xuerui <git@xen0n.name>
Contributors to the loong64 port are:
Weining Lu <luweining@loongson.cn>
Lei Wang <wanglei@loongson.cn>
Lingqin Gong <gonglingqin@loongson.cn>
Xiaolin Zhao <zhaoxiaolin@loongson.cn>
Meidan Li <limeidan@loongson.cn>
Xiaojuan Zhai <zhaixiaojuan@loongson.cn>
Qiyuan Pu <puqiyuan@loongson.cn>
Guoqi Chen <chenguoqi@loongson.cn>
This port has been updated to Go 1.15.6:
https://github.com/loongson/go
Updates #46229
Change-Id: I6760b4a7e51646773cd0f48baa1baba01b213b7d
Reviewed-on: https://go-review.googlesource.com/c/go/+/342325
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
A composite literal assignment
x = T{field: v}
may be compiled to
x = T{}
x.field = v
We already do not use this form is RHS uses LHS. If LHS is
address-taken, RHS may uses LHS implicitly, e.g.
v = &x.field
x = T{field: *v}
The lowering above would change the value of RHS (*v).
Fixes#52953.
Change-Id: I3f798e00598aaa550b8c17182c7472fef440d483
Reviewed-on: https://go-review.googlesource.com/c/go/+/407014
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Change-Id: I63eb42f3ce5ca452279120a5b33518f4ce16be45
GitHub-Last-Rev: a88f2f72be
GitHub-Pull-Request: golang/go#52951
Reviewed-on: https://go-review.googlesource.com/c/go/+/406843
Run-TryBot: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
For #51291
Change-Id: If47e4cbf899853ade5050852c3870b9500da4c63
Reviewed-on: https://go-review.googlesource.com/c/go/+/406916
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
CL 406358 added test that use -buildmode=plugin. But plugin mode only
supports on some os/arch pairs, so this CL moving the test to
misc/cgo/testplugin directory instead.
Updates #52937
Change-Id: Iad049443c1f6539f6af1988bebd4dff56c6e1bf9
Reviewed-on: https://go-review.googlesource.com/c/go/+/406774
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
CL 395854 made inline pass to not inlining function with shape params,
but pass no shape arguments. This is intended to be the reverse case of
CL 361260.
However, CL 361260 is using wider condition than necessary. Though it
only needs to check against function parameters, it checks whether the
function type has no shape. It does not cause any issue, because
!fn.Type().HasShape() implies !fn.Type().Params().HasShape().
But for the reverse case, it's not true. Function may have shape type,
but has no shape arguments. Thus, we must tighten the condition to
explicitly check against the function parameters only.
Fixes#52907
Change-Id: Ib87e87ff767c31d99d5b36aa4a6c1d8baf32746d
Reviewed-on: https://go-review.googlesource.com/c/go/+/406475
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Generic functions require instantiation, which package plugin doesn't
support, and likely never will. So instead, we can just skip writing
out any generic functions, which avoids an ICE in the plugin
generation code.
This issue doesn't affect GOEXPERIMENT=unified, because it avoids
leaking any non-instantiated types/functions to the rest of the
compiler backend.
Fixes#52937.
Change-Id: Ie35529c5c241e46b77fcb5b8cca48bb99ce7bfcb
Reviewed-on: https://go-review.googlesource.com/c/go/+/406358
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
This test is currently overly sensitive to compiler optimizations,
because inlining can affect the order in which cmd/link emits field
references. The order doesn't actually matter though, so this CL just
tweaks the test to sort the tracked fields before printing them.
Updates #51734.
Change-Id: I3b65ca265856b2e1102f40406d5ce34610c70d40
Reviewed-on: https://go-review.googlesource.com/c/go/+/406674
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Since CL 391014, cmd/compile now requires the -p flag to be set the
build system. This CL changes it to initialize LocalPkg.Path to the
provided path, rather than relying on writing out `"".` into object
files and expecting cmd/link to substitute them.
However, this actually involved a rather long tail of fixes. Many have
already been submitted, but a few notable ones that have to land
simultaneously with changing LocalPkg:
1. When compiling package runtime, there are really two "runtime"
packages: types.LocalPkg (the source package itself) and
ir.Pkgs.Runtime (the compiler's internal representation, for synthetic
references). Previously, these ended up creating separate link
symbols (`"".xxx` and `runtime.xxx`, respectively), but now they both
end up as `runtime.xxx`, which causes lsym collisions (notably
inittask and funcsyms).
2. test/codegen tests need to be updated to expect symbols to be named
`command-line-arguments.xxx` rather than `"".foo`.
3. The issue20014 test case is sensitive to the sort order of field
tracking symbols. In particular, the local package now sorts to its
natural place in the list, rather than to the front.
Thanks to David Chase for helping track down all of the fixes needed
for this CL.
Updates #51734.
Change-Id: Iba3041cf7ad967d18c6e17922fa06ba11798b565
Reviewed-on: https://go-review.googlesource.com/c/go/+/393715
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
CL 395854 made inline pass to not inlining function with shape params,
but pass no shape arguments. But it does not consider the case where
function has shape params, but passing zero arguments. In this case, the
un-safe interface conversion that may be applied to a shape argument can
not happen, so it's safe to inline the function.
Fixes#52907
Change-Id: Ifa7b23709bb47b97e27dc1bf32343d92683ef783
Reviewed-on: https://go-review.googlesource.com/c/go/+/406176
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This is the same fix as CL 36126, but for the reverse case, function
with shape params but passed no shape arg. The same conversion problem
may occur in this case, see details explanation there.
Fixes#51909Fixes#51925
Change-Id: Ib0c1973c7511d85b4918a252c80060f1864180cf
Reviewed-on: https://go-review.googlesource.com/c/go/+/395854
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
For #52841
Change-Id: If4723a70fba0dbedb5d1e70dab58f0b4612bf8b9
Reviewed-on: https://go-review.googlesource.com/c/go/+/405759
Auto-Submit: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
CL 391014 requires the compiler to be invoked with the -p flag, to
specify the package path. Later, CL 394217 makes the compiler to
produce an unlinkable object file, so "go tool compile x.go" can
still be used on the command line. This CL does the same for the
assembler, requiring -p, otherwise generating an unlinkable object.
No special case for the main package, as the main package cannot
be only assembly code, and there is no way to tell if it is the
main package from an assembly file.
Now we guarantee that we always have an expanded package path in
the object file. A later CL will delete the name expansion code
in the linker.
Change-Id: I8c10661aaea2ff794614924ead958d80e7e2487d
Reviewed-on: https://go-review.googlesource.com/c/go/+/404298
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The compiler use to compile f()(g()) as:
t1, t2 := g()
f()(t1, t2)
That violates the Go spec, since when "..., all function calls, ... are
evaluated in lexical left-to-right order"
This PR fixes the bug by compiling f()(g()) as:
t0 := f()
t1, t2 := g()
t0(t1, t2)
to make "f()" to be evaluated before "g()".
Fixes#50672
Change-Id: I6a766f3dfc7347d10f8fa3a151f6a5ea79bcf818
Reviewed-on: https://go-review.googlesource.com/c/go/+/392834
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
math/bits.Add64 and math/bits.Sub64 now lower and optimize
directly in SSA form.
The optimization of carry chains focuses around eliding
XER<->GPR transfers of the CA bit when used exclusively as an
input to a single carry operations, or when the CA value is
known.
This also adds support for handling XER spills in the assembler
which could happen if carry chains contain inter-dependencies
on each other (which seems very unlikely with practical usage),
or a clobber happens (SRAW/SRAD/SUBFC operations clobber CA).
With PPC64 Add64/Sub64 lowering into SSA and this patch, the net
performance difference in crypto/elliptic benchmarks on P9/ppc64le
are:
name old time/op new time/op delta
ScalarBaseMult/P256 46.3µs ± 0% 46.9µs ± 0% +1.34%
ScalarBaseMult/P224 356µs ± 0% 209µs ± 0% -41.14%
ScalarBaseMult/P384 1.20ms ± 0% 0.57ms ± 0% -52.14%
ScalarBaseMult/P521 3.38ms ± 0% 1.44ms ± 0% -57.27%
ScalarMult/P256 199µs ± 0% 199µs ± 0% -0.17%
ScalarMult/P224 357µs ± 0% 212µs ± 0% -40.56%
ScalarMult/P384 1.20ms ± 0% 0.58ms ± 0% -51.86%
ScalarMult/P521 3.37ms ± 0% 1.44ms ± 0% -57.32%
MarshalUnmarshal/P256/Uncompressed 2.59µs ± 0% 2.52µs ± 0% -2.63%
MarshalUnmarshal/P256/Compressed 2.58µs ± 0% 2.52µs ± 0% -2.06%
MarshalUnmarshal/P224/Uncompressed 1.54µs ± 0% 1.40µs ± 0% -9.42%
MarshalUnmarshal/P224/Compressed 1.54µs ± 0% 1.39µs ± 0% -9.87%
MarshalUnmarshal/P384/Uncompressed 2.40µs ± 0% 1.80µs ± 0% -24.93%
MarshalUnmarshal/P384/Compressed 2.35µs ± 0% 1.81µs ± 0% -23.03%
MarshalUnmarshal/P521/Uncompressed 3.79µs ± 0% 2.58µs ± 0% -31.81%
MarshalUnmarshal/P521/Compressed 3.80µs ± 0% 2.60µs ± 0% -31.67%
Note, P256 uses an asm implementation, thus, little variation is expected.
Change-Id: I88a24f6bf0f4f285c649e40243b1ab69cc452b71
Reviewed-on: https://go-review.googlesource.com/c/go/+/346870
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
This issue has been fixed in CL 403837.
Fixes#51840.
Change-Id: I282062bb06278696fe25e9ede333c64539dc964e
Reviewed-on: https://go-review.googlesource.com/c/go/+/404914
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
When a fully instantiated generic method is exported, be sure to also
export the types in its signature.
Fixes#52279.
Change-Id: Icc6bca05b01f914cf67faaf1bf184eaa5484f521
Reviewed-on: https://go-review.googlesource.com/c/go/+/405118
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Following CL 405114, the extension rule is also wrong. It is safe
to drop the extension if the value is from a boolean-generating
instruction, but not a boolean-typed Value in general (e.g. a Phi
or a in-register parameter). Fix it.
Updates #52788.
Change-Id: Icf3028fe8e90806f9f57fbe2b38d47da27a97e2a
Reviewed-on: https://go-review.googlesource.com/c/go/+/405115
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
On ARM64, an If block is lowered to (NZ cond yes no). This is
incorrect because cond is a boolean value and therefore only the
last byte is meaningful (same as AMD64, see ARM64Ops.go). But here
we are comparing a full register width with 0. Correct it by
comparing only the last bit.
Fixes#52788.
Change-Id: I2cacf9f3d2f45e149c361a290f511b2d4ed845c4
Reviewed-on: https://go-review.googlesource.com/c/go/+/405114
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
For this code:
z &= 63
_ = x<<z | x>>(64-z)
Now can prove 'x<<z' in bound. In ppc64 lowering pass, it will not
produce an extra '(ANDconst <typ.Int64> [63] z)' causing
codegen/rotate.go failed. Just remove the type check in rewrite rules
as the workaround.
Removes 32 bounds checks during make.bat.
Fixes#52563.
Change-Id: I14ed2c093ff5638dfea7de9bc7649c0f756dd71a
Reviewed-on: https://go-review.googlesource.com/c/go/+/404315
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: David Chase <drchase@google.com>
Auto-Submit: Keith Randall <khr@golang.org>
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
An invalid program may produce invalid types. If the program
calls unsafe.Sizeof on such a type, which is a compile-time
computation, the size-computation must be able to handle it.
Add the invalid type to the list of permissible basic types
and give it a size of 1 (word).
Fixes#52748.
Change-Id: I6c409628f9b77044758caf71cdcb199f9e77adea
Reviewed-on: https://go-review.googlesource.com/c/go/+/404894
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Noder pass will build a closure to implement generic function
instantiation which may produce `.dict` and `.rcvr` ident.
Since we allow `.dict` during exporting, we should allow `.rcvr` too.
Fixes#52241.
Change-Id: Ifc3912ba5155b5ac1887f20830da64f4fb3fceb6
Reviewed-on: https://go-review.googlesource.com/c/go/+/404314
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
For #52535
Change-Id: I6798a8379163497ebebcdadf836b8569735c282b
Reviewed-on: https://go-review.googlesource.com/c/go/+/404496
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Ian Lance Taylor <iant@google.com>
In walkCompare, any ir.OCONVNOP was removed from both operands. So when
constructing assignments for them to preserve any side-effects, using
temporary variables can cause type mismatched with original type.
Instead, using blank assignments will prevent that issue and still make
sure that the operands will be evaluated.
Fixes#52701
Change-Id: I229046acb154890bb36fe441d258563687fdce37
Reviewed-on: https://go-review.googlesource.com/c/go/+/403997
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Robert Griesemer <gri@google.com>
It is hit ~70k times building go.
This make the go binary, 0.04% smaller.
I didn't included benchmarks because this is just constant foldings
and is hard to mesure objectively.
For example, this enable rewriting things like:
if x == 20 {
return x + 30 + z
}
Into:
if x == 20 {
return 50 + z
}
It's not just fixing programer's code,
the ssa generator generate code like this sometimes.
Change-Id: I0861f342b27f7227b5f1c34d8267fa0057b1bbbc
GitHub-Last-Rev: 4c2f9b5216
GitHub-Pull-Request: golang/go#52669
Reviewed-on: https://go-review.googlesource.com/c/go/+/403735
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This shows up in a few crypto functions, and other
assorted places.
Change-Id: I5a7f4c25ddd4a6499dc295ef693b9fe43d2448ab
Reviewed-on: https://go-review.googlesource.com/c/go/+/404057
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
When we convert a type to a shaped interface type, we are not able
to recognize the itab. So passing the itab by dictionary as the
workaround.
Fixes#52026.
Change-Id: I75c23c7dd215daf9761dc24116a8af2c28c6d948
Reviewed-on: https://go-review.googlesource.com/c/go/+/401034
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
In #52529, we observed that checking types for duplicate fields and
methods during method collection can result in incorrect early expansion
of the base type. Fix this by delaying the check for duplicate fields.
Notably, we can't delay the check for duplicate methods as we must
preserve the invariant that added method names are unique.
After this change, it may be possible in the presence of errors to have
a type-checked type containing a method name that conflicts with a field
name. With the previous logic conflicting methods would have been
skipped. This is a change in behavior, but only for invalid code.
Preserving the existing behavior would likely require delaying method
collection, which could have more significant consequences.
As a result of this change, the compiler test fixedbugs/issue28268.go
started passing with types2, being previously marked as broken. The fix
was not actually related to the duplicate method error, but rather the
fact that we stopped reporting redundant errors on the calls to x.b()
and x.E(), because they are now (valid!) methods.
Fixes#52529
Change-Id: I850ce85c6ba76d79544f46bfd3deb8538d8c7d00
Reviewed-on: https://go-review.googlesource.com/c/go/+/403455
Reviewed-by: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
We need to use the same marker everywhere. My CL to rename the
marker (CL 241661) and the CL to add more uses of the marker
under the old name (CL 241678) weren't coordinated with each other.
Fixes#52612
Change-Id: I97023c0769e518491924ef457fe03bf64a2cefa6
Reviewed-on: https://go-review.googlesource.com/c/go/+/403094
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Accept ~x as ordinary unary expression in the parser but recognize
such expressions as invalid in the type checker.
This change opens the door to recognizing complex type constraint
literals such as `*E|~int` in `[P *E|~int]` and parse them correctly
instead of reporting a parse error because `P*E|~int` syntactically
looks like an incorrect array length expression (binary expression
where the RHS of | is an invalid unary expression ~int).
As a result, the parser is more forgiving with expressions but the
type checker will reject invalid uses as before.
We could pass extra information into the binary/unary expression
parse functions to prevent the use of ~ in invalid situations but
it doesn't seem worth the trouble. In fact it may be advantageous
to allow a more liberal expression syntax especially in the presence
of errors (better parser synchronization after an error).
Preparation for fixing #49482.
Change-Id: I119e8bd9445dfa6460fcd7e0658e3554a34b2769
Reviewed-on: https://go-review.googlesource.com/c/go/+/402255
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Change-Id: Ia0a4be56d4e1fbfc73e6ce24f01a658c89a74adb
GitHub-Last-Rev: dd95e50c4b
GitHub-Pull-Request: golang/go#52393
Reviewed-on: https://go-review.googlesource.com/c/go/+/400694
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
This CL exports the existing ir.UintptrKeepAlive via the new directive
//go:uintptrkeepalive. This makes the compiler insert KeepAlives for
pointers converted to uintptr in calls, keeping them alive for the
duration of the call.
//go:uintptrkeepalive requires //go:nosplit, as stack growth can't
handle these arguments (it cannot know which are pointers). We currently
check this on the immediate function, but the actual restriction applies
to all transitive calls.
The existing //go:uintptrescapes is an extension of
//go:uintptrkeepalive which forces pointers to escape to the heap, thus
eliminating the stack growth issue.
This pragma is limited to the standard library.
For #51087
Change-Id: If9a19d484d3561b4219e5539b70c11a3cc09391e
Reviewed-on: https://go-review.googlesource.com/c/go/+/388095
Run-TryBot: Michael Pratt <mpratt@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
CL 388095 will change this file significantly. Move it preemptively to
ensure git tracks the move properly.
For #51087
Change-Id: I1408aecf8675723041b64e54cf44cdec38cc655c
Reviewed-on: https://go-review.googlesource.com/c/go/+/388094
Run-TryBot: Michael Pratt <mpratt@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Fixes#52438.
Change-Id: I5cbf8c448dba037e9e0c5fe8f209401d6bf7d43f
Reviewed-on: https://go-review.googlesource.com/c/go/+/401134
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
The linker performs a global analysis of all nosplit call chains to
check they fit in the stack space ensured by splittable functions.
That analysis has two problems right now:
1. It's inefficient. It performs a top-down analysis, starting with
every nosplit function and the nosplit stack limit and walking *down*
the call graph to compute how much stack remains at every call. As a
result, it visits the same functions over and over, often with
different remaining stack depths. This approach is historical: this
check was originally written in C and this approach avoided the need
for any interesting data structures.
2. If some call chain is over the limit, it only reports a single call
chain. As a result, if the check does fail, you often wind up playing
whack-a-mole by guessing where the problem is in the one chain, trying
to reduce the stack size, and then seeing if the link works or reports
a different path.
This CL completely rewrites the nosplit stack check. It now uses a
bottom-up analysis, computing the maximum stack height required by
every function's call tree. This visits every function exactly once,
making it much more efficient. It uses slightly more heap space for
intermediate storage, but still very little in the scheme of the
overall link. For example, when linking cmd/go, the new algorithm
virtually eliminates the time spent in this pass, and reduces overall
link time:
│ before │ after │
│ sec/op │ sec/op vs base │
Dostkcheck 7.926m ± 4% 1.831m ± 6% -76.90% (p=0.000 n=20)
TotalTime 301.3m ± 1% 296.4m ± 3% -1.62% (p=0.040 n=20)
│ before │ after │
│ B/op │ B/op vs base │
Dostkcheck 40.00Ki ± 0% 212.15Ki ± 0% +430.37% (p=0.000 n=20)
Most of this time is spent analyzing the runtime, so for larger
binaries, the total time saved is roughly the same, and proportionally
less of the overall link.
If the new implementation finds an error, it redoes the analysis,
switching to preferring quality of error reporting over performance.
For error reporting, it computes stack depths top-down (like the old
algorithm), and reports *all* paths that are over the stack limit,
presented as a tree for compactness. For example, this is the output
from a simple test case from test/nosplit with two over-limit paths
from f1:
main.f1: nosplit stack overflow
main.f1
grows 768 bytes, calls main.f2
grows 56 bytes, calls main.f4
grows 48 bytes
80 bytes over limit
grows 768 bytes, calls main.f3
grows 104 bytes
80 bytes over limit
While we're here, we do a few nice cleanups:
- We add a debug output flag, which will be useful for understanding
what our nosplit chains look like and which ones are close to
running over.
- We move the implementation out of the fog of lib.go to its own file.
- The implementation is generally more Go-like and less C-like.
Change-Id: If1ab31197f5215475559b93695c44a01bd16e276
Reviewed-on: https://go-review.googlesource.com/c/go/+/398176
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The nosplit test was originally written when the stack limit was a
mere 128 bytes. Now it's much larger, but rather than rewriting all of
the tests, we apply a hack to just add the extra space into the stack
frames of the existing tests.
Unfortunately, we add it in the wrong place. The extra space should be
added just once per chain of nosplit functions, but instead we add it
to every frame that appears first on a line in the test's little
script language. This means that for tests like
start 0 call f1
f1 16 nosplit call f2
f2 16 nosplit call f3
f3 16 nosplit call f4
f4 16 nosplit call f5
f5 16 nosplit call f6
f6 16 nosplit call f7
f7 16 nosplit call f8
f8 16 nosplit call end
end 1000
REJECT
we add 672 bytes to *every* frame, meaning that we wind up way over
the stack limit by the end of the stanza, rather than just a little as
originally intended.
Fix this by instead adding the extra space to the first nosplit
function in a stanza. This isn't perfect either, since we could have a
nosplit -> split -> nosplit chain, but it's the best we can do without
a graph analysis.
Change-Id: Ibf156c68fe3eb1b64a438115f4a17f1a6c7e2bd1
Reviewed-on: https://go-review.googlesource.com/c/go/+/398174
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
So that the inliner knows all the other cases are dead and doesn't
accumulate any cost for them.
The canonical case for this is switching on runtime.GOOS, which occurs
several places in the stdlib.
Fixes#50253
Change-Id: I44823aaebb6c1b03c9b0c12d10086db81954350f
Reviewed-on: https://go-review.googlesource.com/c/go/+/399694
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
runtime.getitab need filled fun[0] to identify whether
implemented the interface.
Fixes#51700Fixes#52228
Change-Id: I0173b98f4e1b45e3a0183a5b60229d289140d1e6
Reviewed-on: https://go-review.googlesource.com/c/go/+/399058
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Auto-Submit: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: David Chase <drchase@google.com>
gofmt is rewriting +build comments into //go:build anyway, so update
the test script to support both.
Change-Id: Ia6d950cfaa2fca9f184b8b2d3625a551bff88dde
Reviewed-on: https://go-review.googlesource.com/c/go/+/399794
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
After CL 398014 fixed a compiler deadlock on syntax errors,
this CL adds a test case and more details for that.
How it was fixed:
CL 57751 introduced a channel "sem" to limit the number of
simultaneously open files.
Unfortunately, when the number of syntax processing goroutines
exceeds this limit, will easily trigger deadlock.
In the original implementation, "sem" only limited the number
of open files, not the number of concurrent goroutines, which
will cause extra goroutines to block on "sem". When the p.err
of the following iteration happens to be held by the blocking
goroutine, it will fall into a circular wait, which is a deadlock.
CL 398014 fixed the above deadlock, also see issue #52127.
First, move "sem <- struct{}{}" to the outside of the syntax
processing goroutine, so that the number of concurrent goroutines
does not exceed the number of open files, to ensure that all
goroutines in execution can eventually write to p.err.
Second, move the entire syntax processing logic into a separate
goroutine to avoid blocking on the producer side.
Change-Id: I1bb89bfee3d2703784f0c0d4ded82baab2ae867a
Reviewed-on: https://go-review.googlesource.com/c/go/+/399054
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Fixes#52278
Change-Id: Ibf67c7b019feec277d316e04d93b458efea133fb
Reviewed-on: https://go-review.googlesource.com/c/go/+/399574
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Auto-Submit: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
In the load tests, we only want to test the assembly produced by
the load operations. If we use the global variable sink, it will produce
one load operation and one store operation(assign to sink).
For example:
func load_be64(b []byte) uint64 {
sink64 = binary.BigEndian.Uint64(b)
}
If we compile this function with GOAMD64=v3, it may produce MOVBEQload
and MOVQstore or MOVQload and MOVBEQstore, but we only want MOVBEQload.
Discovered when developing CL 395474.
Same for the store tests.
Change-Id: I65c3c742f1eff657c3a0d2dd103f51140ae8079e
Reviewed-on: https://go-review.googlesource.com/c/go/+/397875
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Cherry Mui <cherryyz@google.com>
With this change, the shift checking code matches the corresponding
go/types code, but for the differences in the internal error reporting,
and call of check.overflow.
The change leads to the recording of an untyped int value if the RHS
of a non-constant shift is an untyped integer value. Adjust the type
in the compiler's irgen accordingly. Add test/shift3.go to verify
behavior.
Change-Id: I20386fcb1d5c48becffdc2203081fb70c08b282d
Reviewed-on: https://go-review.googlesource.com/c/go/+/398236
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
