Part of converting all tests to script framework to improve
test parallelism.
Updates #36320
Updates #17751
Change-Id: I601e0fcee32b8c5bf2107b520d1dfbe12a19ad3f
Reviewed-on: https://go-review.googlesource.com/c/go/+/213223
Reviewed-by: Jay Conrod <jayconrod@google.com>
It looks like TestGoBuildGOPATHOrderBroken has been fixed so I've converted
that too, without the skip.
Part of converting all tests to script framework to improve
test parallelism.
Updates #36320
Updates #17751
Change-Id: I7ee77f22fb888811c175bcdc5eb814c80fbec420
Reviewed-on: https://go-review.googlesource.com/c/go/+/214432
Reviewed-by: Jay Conrod <jayconrod@google.com>
Part of converting all tests to script framework to improve
test parallelism.
Updates #36320
Updates #17751
Change-Id: I394844da1ffc0dcde7f5862c41ed8efa7c5ca088
Reviewed-on: https://go-review.googlesource.com/c/go/+/214429
Reviewed-by: Jay Conrod <jayconrod@google.com>
Part of converting all tests to script framework to improve
test parallelism.
Updates #36320
Updates #17751
Change-Id: I9a99aa5d37300c83a2f95fb906949cb4c1d5356f
Reviewed-on: https://go-review.googlesource.com/c/go/+/214426
Reviewed-by: Jay Conrod <jayconrod@google.com>
Part of converting all tests to script framework to improve
test parallelism.
Updates #36320
Updates #17751
Change-Id: If1e591f28d6399a07b37ed7f4a1419bf7cd915eb
Reviewed-on: https://go-review.googlesource.com/c/go/+/214425
Reviewed-by: Jay Conrod <jayconrod@google.com>
The name of the test is too long to fit on the first line. It's
TestGoTestBuildsAnXtestContainingOnlyNonRunnableExamples.
Part of converting all tests to script framework to improve
test parallelism.
Updates #36320
Updates #17751
Change-Id: I490748271b10a85cbe1d34f9dbecb86ccf0101a7
Reviewed-on: https://go-review.googlesource.com/c/go/+/214423
Reviewed-by: Jay Conrod <jayconrod@google.com>
Part of converting all tests to script framework to improve
test parallelism.
Updates #36320
Updates #17751
Change-Id: I1020feaa4ddb40ff52c46728bc4973cea4c7b066
Reviewed-on: https://go-review.googlesource.com/c/go/+/214391
Reviewed-by: Jay Conrod <jayconrod@google.com>
Instead of writing AuxInt during prove and then zeroing it during lower,
just don't write it in the first place.
Passes toolstash-check -all.
Change-Id: Iea4b555029a9d69332e835536f9cf3a42b8223db
Reviewed-on: https://go-review.googlesource.com/c/go/+/220682
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
We were assigning a cost of 2 for intrinsics:
One when we recognized an intrinsic,
and one for the OCALLFUNC node.
I believe that the intent was that intrinsics should
cost 1, since they are typically an arithmetic op,
and because they tend to occur in performance-sensitive code.
(Not that any of this is particularly principled right now.)
Stop charging when we recognize an intrinsic;
let the OCALLFUNC node cover the cost.
This has a negligible impact on std+cmd.
Change-Id: Ie6ae5c18da3ae7e40aec425aed95c6999c2831a1
Reviewed-on: https://go-review.googlesource.com/c/go/+/221357
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Also, avoid string(i) where i has type int.
Updates #32479
Change-Id: If3c6edc8523860082726e034ef9e887b5f7fabd1
Reviewed-on: https://go-review.googlesource.com/c/go/+/221382
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL changes some unit test functions, making sure that these tests (and goroutines spawned during test) won't block.
Since they are just test functions, I use one CL to fix them all. I hope this won't cause trouble to reviewers and can save time for us.
There are three main categories of incorrect logic fixed by this CL:
1. Use testing.Fatal()/Fatalf() in spawned goroutines, which is forbidden by Go's document.
2. Channels are used in such a way that, when errors or timeout happen, the test will be blocked and never return.
3. Channels are used in such a way that, when errors or timeout happen, the test can return but some spawned goroutines will be leaked, occupying resource until all other tests return and the process is killed.
Change-Id: I3df931ec380794a0cf1404e632c1dd57c65d63e8
Reviewed-on: https://go-review.googlesource.com/c/go/+/219380
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
If we see a racy use of timers, as in concurrent calls to Timer.Reset,
do the operations in an unpredictable order, rather than crashing.
Fixes#37400
Change-Id: Idbac295df2dfd551b6d762909d5040fc532c1b34
Reviewed-on: https://go-review.googlesource.com/c/go/+/221077
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Now that android/arm64 supports internal linking PIE, enable the
test. While here, I realized that some cgo tests are also not
enabled on android/arm64. Enable them as well. Let's see if it
works.
Change-Id: Ibf186fe402ebf0bbec82873fd56d0eb752b48180
Reviewed-on: https://go-review.googlesource.com/c/go/+/221099
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Elias Naur <mail@eliasnaur.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
It was enabled in CL 207877, but then accidentally disabled in
CL 207299 due to a bad rebase. Reenable.
Change-Id: I147bf724a4263d4aae54576a36cc7e1cad5e8a2c
Reviewed-on: https://go-review.googlesource.com/c/go/+/221098
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Elias Naur <mail@eliasnaur.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The SSA backend has rules to read the contents of readonly Lsyms.
However, this rule was failing to trigger for many readonly Lsyms.
This is because the readonly attribute that was set on the Node.Name
was not propagated to its Lsym until the dump globals phase, after SSA runs.
To work around this phase ordering problem, introduce Node.SetReadonly,
which sets Node.Name.Readonly and also configures the Lsym
enough that SSA can use it.
This change also fixes a latent problem in the rewrite rule function,
namely that reads past the end of lsym.P were treated as entirely zero,
instead of merely requiring padding with trailing zeros.
This change also adds an amd64 rule needed to fully optimize
the results of this change. It would be better not to need this,
but the zero extension that should handle this for us
gets optimized away too soon (see #36897 for a similar problem).
I have not investigated whether other platforms also need new
rules to take full advantage of the new optimizations.
Compiled code for (interface{})(true) on amd64 goes from:
LEAQ type.bool(SB), AX
MOVBLZX ""..stmp_0(SB), BX
LEAQ runtime.staticbytes(SB), CX
ADDQ CX, BX
to
LEAQ type.bool(SB), AX
LEAQ runtime.staticbytes+1(SB), BX
Prior to this change, the readonly symbol rewrite rules
fired a total of 884 times during make.bash.
Afterwards they fire 1807 times.
file before after Δ %
cgo 4827832 4823736 -4096 -0.085%
compile 24907768 24895656 -12112 -0.049%
fix 3376952 3368760 -8192 -0.243%
pprof 14751700 14747604 -4096 -0.028%
total 120343528 120315032 -28496 -0.024%
Change-Id: I59ea52138276c37840f69e30fb109fd376d579ec
Reviewed-on: https://go-review.googlesource.com/c/go/+/220499
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
There are often many values to clobber.
Allow passing them all in at once.
The goal is increased rule readability.
As a bonus, it shrinks cmd/compile by ~97k, almost half a percent.
Package SSA requires 1.2% less memory to compile.
The single-line changes were make via regex,
and the remaining multi-line clobbers were manually combined.
Passes toolstash-check -all.
Change-Id: Ib310e9265d3616211f8192c9040b4c8933824d19
Reviewed-on: https://go-review.googlesource.com/c/go/+/220691
Reviewed-by: Michael Munday <mike.munday@ibm.com>
According to https://golang.org/wiki/NetBSD, NetBSD 7.0 is supported as
of Go 1.3 (with Go 1.5 recommended). NetBSD 6.0 was last supported in Go
1.9.7. Thus, bump the minimal ABI version to NetBSD 7.0
Suggested by Benny Siegert in CL 212461.
Change-Id: I11dd14c6b835ac9fc156880b2551f71893c7f267
Reviewed-on: https://go-review.googlesource.com/c/go/+/220428
Reviewed-by: Benny Siegert <bsiegert@gmail.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
These rules fire in particular when comparing to a constant
string of length two. They should trigger even more after CL 220499.
file before after Δ %
compile 20639976 20635880 -4096 -0.020%
total 116003456 115999360 -4096 -0.004%
Change-Id: I21c1c02cf32d710d7a4eb12efab00f02796ccb84
Reviewed-on: https://go-review.googlesource.com/c/go/+/220694
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Slicemask can be performed with three immediate instructions, rather than the
six currently in use.
Change-Id: I3f8ca2d5affd1403db8fa79b356f248e6e9332c5
Reviewed-on: https://go-review.googlesource.com/c/go/+/220923
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Use SUBW to perform a 32-bit subtraction, rather than zero extending from
32 to 64 bits. This reduces Eq32 and Neq32 to two instructions, rather than
the four instructions required previously.
Change-Id: Ib2798324881e9db842c864e91a0c1b1e48c4b67b
Reviewed-on: https://go-review.googlesource.com/c/go/+/220921
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Open-coded defers were fixed and re-enabled on riscv64, however this test was
inadvertantly left disabled.
Updates #36786
Change-Id: I128fc84baa3d51f50d173e19e52051dc4d9a07c3
Reviewed-on: https://go-review.googlesource.com/c/go/+/220920
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
No test because this is difficult to reproduce, and such a test would
always be flaky.
Updates #36568
Change-Id: I8170410a7729ecc6f90baf8005444d6b1241185e
Reviewed-on: https://go-review.googlesource.com/c/go/+/220978
Run-TryBot: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
The existing implementation outputs inline cost iff function cannot be inlined with Debug['m'] > 1, the cost info is also useful if the function is inlineable.
Fixes#36780
Change-Id: Ic96f6baf96aee25fb4b33d31d4d644dc2310e536
Reviewed-on: https://go-review.googlesource.com/c/go/+/216778
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
`go mod vendor` should create vendor/modules.txt even when the only deps
in go.mod are unused.
Fixes: #36580
Change-Id: I92a746d3f013bc2bdc3d2cec6e14b16f606c2edd
GitHub-Last-Rev: ea39a1c622
GitHub-Pull-Request: golang/go#36920
Reviewed-on: https://go-review.googlesource.com/c/go/+/217135
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The generic Greater and Geq ops can always be replaced with the Less and
Leq ops. This CL therefore removes them. This simplifies the compiler since
it reduces the number of operations that need handling in both code and in
rewrite rules. This will be especially true when adding control flow
optimizations such as the integer-in-range optimizations in CL 165998.
Change-Id: If0648b2b19998ac1bddccbf251283f3be4ec3040
Reviewed-on: https://go-review.googlesource.com/c/go/+/220417
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Ensure that any comparison between two values has the same argument
order. This helps ensure that they can be eliminated during the
lowered CSE pass which will be particularly important if we eliminate
the Greater and Geq ops (see #37316).
Example:
CMP R0, R1
BLT L1
CMP R1, R0 // different order, cannot eliminate
BEQ L2
CMP R0, R1
BLT L1
CMP R0, R1 // same order, can eliminate
BEQ L2
This does have some drawbacks. Notably comparisons might 'flip'
direction in the assembly output after even small changes to the
code or compiler. It should help make optimizations more reliable
however.
compilecmp master -> HEAD
master (218f4572f5): text/template: make reflect.Value indirections more robust
HEAD (f1661fef3e): cmd/compile: canonicalize comparison argument order
platform: linux/amd64
file before after Δ %
api 6063927 6068023 +4096 +0.068%
asm 5191757 5183565 -8192 -0.158%
cgo 4893518 4901710 +8192 +0.167%
cover 5330345 5326249 -4096 -0.077%
fix 3417778 3421874 +4096 +0.120%
pprof 14889456 14885360 -4096 -0.028%
test2json 2848138 2844042 -4096 -0.144%
trace 11746239 11733951 -12288 -0.105%
total 132739173 132722789 -16384 -0.012%
Change-Id: I11736b3fe2a4553f6fc65018f475e88217fa22f9
Reviewed-on: https://go-review.googlesource.com/c/go/+/220425
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The bootstrapping process (make.bash) on all other platforms use
internal linking. This change brings android/arm64 in line, fixing the
scary warning on our self-hosted Corellium builders:
warning: unable to find runtime/cgo.a
The linkmode default is changed to internal for all Android programs,
but in practice that won't matter outside our builders: using Go with
Android apps requires buildmode=c-shared which uses linkmode external.
Fixes#31343
Updates #31819
Change-Id: I3b3ada5ed69a7989e6d8e5960bbebf5e1c22aada
Reviewed-on: https://go-review.googlesource.com/c/go/+/207299
Run-TryBot: Elias Naur <mail@eliasnaur.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
"SSL_CERT_DIR" is meant to hold more than one directory, when a colon
is used as a delimiter. However, we assumed it'd be a single directory
for all root certificates.
OpenSSL and BoringSSL properly respected the colon separated
"SSL_CERT_DIR", as per:
* OpenSSL 12a765a523/crypto/x509/by_dir.c (L153-L209)
* BoringSSL 3ba9586bc0/crypto/x509/by_dir.c (L194-L247)
This change adds that parity to loadSystemRoots.
RELNOTE=yes
Fixes#35325
Change-Id: I0d554a00ccc34300a7f0529aa741ee7e2d5762f9
Reviewed-on: https://go-review.googlesource.com/c/go/+/205237
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Instead use string(r) where r has type rune.
This is in preparation for a vet warning for string(i).
Updates #32479
Change-Id: Ic205269bba1bd41723950219ecfb67ce17a7aa79
Reviewed-on: https://go-review.googlesource.com/c/go/+/220844
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Akhil Indurti <aindurti@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Toshihiro Shiino <shiino.toshihiro@gmail.com>
In CL 219131 we inserted a VZEROUPPER instruction on darwin/amd64.
The instruction is not available on pre-AVX machines. Guard it
with CPU feature.
Fixes#37459.
Change-Id: I9a064df277d091be4ee594eda5c7fd8ee323102b
Reviewed-on: https://go-review.googlesource.com/c/go/+/221057
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
In rare circumstances, this helps report a race which would
otherwise go undetected.
Fixes#36794
Change-Id: I8a3c9bd6fc34efa51516393f7ee72531c34fb073
Reviewed-on: https://go-review.googlesource.com/c/go/+/220685
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
If there's a go file immediately in GOROOT/src, it was probably
accidentally added by the user. Since that package shouldn't
exist, return an error if a user tries to list it. We're only making
this change for GOPATH mode because we don't want to break cases
where users have been doing this historically, but want to fix
this case for the future.
This also leaves open the weird cases where files are placed directly
in vendor directories.
Fixes#36587
Change-Id: I9738e47b1e89fd5048cbb8dd28e44648834b8ea7
Reviewed-on: https://go-review.googlesource.com/c/go/+/216381
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Also, sort them so the results aren't random.
Thanks to @junedev for the bug report & repro.
Fixes#36524
Change-Id: Ic9197ebeceddfb3d0aee895d8fc12ce4d205b164
Reviewed-on: https://go-review.googlesource.com/c/go/+/214680
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This removes much of the complexity of the implementation and use of
the cmd/go/internal/cmdflag package, and makes the behavior of GOFLAGS
in 'go test' and 'go vet' more consistent with other subcommands.
Some of the complexity reduction has been offset by code comments and
bug fixes, particularly for the handling of GOPATH arguments and flag
terminators ('--').
Fixes#32471Fixes#18682
Change-Id: I1f6e46a7c679062e1e409e44a2b9f03b9172883b
Reviewed-on: https://go-review.googlesource.com/c/go/+/211358
Reviewed-by: Jay Conrod <jayconrod@google.com>
Adding a link to this guide will provide more value to instructing Go
users to migrate to modules.
Updates #36878
Change-Id: Ie6ab45efcd35cc5e5ba5adc16ba0ca4cca4292bc
Reviewed-on: https://go-review.googlesource.com/c/go/+/220906
Run-TryBot: Alexander Rakoczy <alex@golang.org>
Reviewed-by: thepudds <thepudds1460@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
