Replace references to the obsoleted RFC 2616 with references to RFC
7230 through 7235, to avoid unnecessary confusion.
Obvious inconsistencies are marked with todo comments.
Updates #21974
Change-Id: I8fb4fcdd1333fc5193b93a2f09598f18c45e7a00
Reviewed-on: https://go-review.googlesource.com/94095
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When we go from a branch block to a plain block, reset the
branch prediction bit. Downstream passes asssume that if the
branch prediction is set, then the block has 2 successors.
Fixes#23504
Change-Id: I2898ec002228b2e34fe80ce420c6939201c0a5aa
Reviewed-on: https://go-review.googlesource.com/88955
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
It appears that old code (from 2009) in xml.(*Decoder).rawToken
replicates append's slice-growing functionality by allocating a new,
bigger backing array and then calling copy.
Simplifying the code by replacing it with a single append call does
not seem to hurt performance:
name old time/op new time/op delta
Marshal-4 11.2µs ± 1% 11.3µs ±10% ~ (p=0.069 n=19+17)
Unmarshal-4 28.6µs ± 1% 28.4µs ± 1% -0.60% (p=0.000 n=20+18)
name old alloc/op new alloc/op delta
Marshal-4 5.78kB ± 0% 5.78kB ± 0% ~ (all equal)
Unmarshal-4 8.61kB ± 0% 8.27kB ± 0% -3.90% (p=0.000 n=20+20)
name old allocs/op new allocs/op delta
Marshal-4 23.0 ± 0% 23.0 ± 0% ~ (all equal)
Unmarshal-4 189 ± 0% 190 ± 0% +0.53% (p=0.000 n=20+20)
Change-Id: Ie580d1216a44760e611e63dee2c339af5465aea5
Reviewed-on: https://go-review.googlesource.com/86655
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The existing implementation declares a variable error which collides
with builting type error.
This change simply renames error variable to err.
Change-Id: Ib56c2530f37f53ec70fdebb825a432d4c550cd04
Reviewed-on: https://go-review.googlesource.com/87775
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
It's always nil, so simplify its signature. Found with unparam.
Change-Id: I45dd0f868ec2f5de98a970776be686417c8d73b6
Reviewed-on: https://go-review.googlesource.com/95235
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Instead of
(And64 x x) -> x
(And32 x x) -> x
(And16 x x) -> x
(And8 x x) -> x
we can now do:
(And(64|32|16|8) x x) -> x
Any part of an opcode can have a parenthesized, |-separated list of possibilites.
The rule is then expanded using each piece of the | combo.
If there are multiple | clauses, they get expanded in tandem.
(All the first positions, then all the second positions, etc.)
All places | opcodes appear must have the same count.
A more complicated example:
(MOV(L|SS)load [off1] {sym1} (LEAQ4 [off2] {sym2} ptr idx) mem) && is32Bit(off1+off2) && canMergeSym(sym1, sym2) ->
(MOV(L|SS)loadidx4 [off1+off2] {mergeSym(sym1,sym2)} ptr idx mem)
This meta-rule generates 2 rules, a MOVL and a MOVSS rule.
This CL is carefully orchestrated to not change the generated rules file at all.
In some cases, this means we can't align the rules nicely because it changes
the whitespace in the generated code. I'll clean that up as a separate step.
There are many more opportunites to compactify rules using this new mechanism.
I've just done some examples, there's more to do.
Change-Id: I8a5e748cd0761ccbb12d09b01925b2f1f4b2f608
Reviewed-on: https://go-review.googlesource.com/86595
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
By grepping for ]string{$, one can find many manual implementations of
stringer. The debug/dwarf ones needed the new -trimprefix flag, too.
html/template was fairly simple, just implementing the fallback as
stringer would. The changes there are trivial.
The ones in debug/dwarf needed a bit of extra logic since the GoString
wants to use its own format, depending on whether or not the value is
one of the known constants.
Change-Id: I501ea7deaa538fa425c8e9c2bb895f480169273f
Reviewed-on: https://go-review.googlesource.com/77253
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
reflect.Value is a struct and does not have a kind nor any flag for
untyped nils. As a result, it is tricky to differentiate when we're
missing a value, from when we have one but it is untyped nil.
We could start using *reflect.Value instead, to add one level of
indirection, using nil for missing values and new(reflect.Value) for
untyped nils. However, that is a fairly invasive change, and would also
mean unnecessary allocations.
Instead, use a special reflect.Value that depicts when a value is
missing. This is the case for the "final" reflect.Value in multiple
scenarios, such as the start of a pipeline. Give it a specific,
unexported type too, to make sure it cannot be mistaken for any other
valid value.
Finally, replace "final.IsValid()" with "final != missingVal", since
final.IsValid() will be false when final is an untyped nil.
Also add a few test cases, all different variants of the untyped nil
versus missing value scenario.
Fixes#18716.
Change-Id: Ia9257a84660ead5a7007fd1cced7782760b62d9d
Reviewed-on: https://go-review.googlesource.com/95215
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Noticed while reading some code.
Change-Id: I63f8c7a453d4895583a8ffc13bec57385b6944aa
Reviewed-on: https://go-review.googlesource.com/95195
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Avoid using make in gobytes which clears the byte slice backing
array unnecessarily since the content is overwritten immediately again.
Check that the user provided length is positive and below the maximum
allowed allocation size explicitly in gobytes as this was done in makeslice
before this change.
Fixes#23634
Change-Id: Id852619e932aabfc468871c42ad07d34da91f45c
Reviewed-on: https://go-review.googlesource.com/94760
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The fourth example for map indexing states you have a map of type [K]V
and attempts to read in a variable of type T. Further, the example
is meant to showcase the boolean return variable saying whether the
map contained a key, but overrides to type T. This will not compile.
Changed last updated date to February 18
Fixes: #23895
Change-Id: I63c52adbcd989afd4855e329e6c727f4c01f7881
Reviewed-on: https://go-review.googlesource.com/94906
Reviewed-by: Robert Griesemer <gri@golang.org>
Calling MkdirAll on paths in extended-length form (\\?\-prefixed)
failed.
MkdirAll calls itself recursively with parent directory of given path in
its parameter. It finds parent directory by looking for delimiter in
the path, and taking the left part. When path is in extended-length form,
it finds empty path at the end.
Here is a sample of path in extended-length form:
\\?\c:\foo\bar
This change fixes that by passing trailing path separator to MkdirAll (so
it works for path like \\?\c:\).
Fixes#22230
Change-Id: I363660b262588c5382ea829773d3b6005ab8df3c
Reviewed-on: https://go-review.googlesource.com/86295
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Follow CL 93655 which removed the (commented-out) usage of this
function.
Also remove unused constant _RLIMIT_AS and type rlimit.
Change-Id: Ifb6e6b2104f4c2555269f8ced72bfcae24f5d5e9
Reviewed-on: https://go-review.googlesource.com/94775
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Updated docs that go run does not return the exit code of
the compiled binary.
Fixes#23716
Change-Id: Ib85459974c4c6d2760ddba957ef711628098661f
Reviewed-on: https://go-review.googlesource.com/94795
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Overall code is unchanged.
The functions for different types (32, 64, str) of map fast routines
are collected in map_fast.go that has grown to ~1300 lines.
Moving the functions for each map fast type into a separate file
allows for an easier overview and navigation within the map code.
Change-Id: Ic09e4212f9025a66a10b11ef8dac23ad49d1d5ae
Reviewed-on: https://go-review.googlesource.com/90335
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
One of the variables declared in cleantempnopop named 'kill'
does not hold a OVARKILL node but an OVARLIVE node.
Rename that variable to 'live' to differentiate it from the other
variable named kill that holds a OVARKILL node.
Passes toolstash -cmp.
Change-Id: I34c8729e5c303b8cdabe44c9af980d4f16000e4b
Reviewed-on: https://go-review.googlesource.com/88816
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Rename all map implementation and test files to use "map"
as a file name prefix instead of "hashmap" for the implementation
and "map" for the test file names.
Change-Id: I7b317c1f7a660b95c6d1f1a185866f2839e69446
Reviewed-on: https://go-review.googlesource.com/90336
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Fixes#23867, CVE-2018-7187
Change-Id: I5d0ba4923c9ed354ef76290e149c182447f9dfe2
Reviewed-on: https://go-review.googlesource.com/94656
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Before this change, when using -insecure, we permitted any meta import
repo root as long as it contained "://". When not using -insecure, we
restrict meta import repo roots to be valid URLs. People may depend on
that somehow, so permit meta import repo roots to be invalid URLs, but
require them to have valid schemes per RFC 3986.
Fixes#23867
Change-Id: Iac666dfc75ac321bf8639dda5b0dba7c8840922d
Reviewed-on: https://go-review.googlesource.com/94603
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This test was sometimes timing out on the plan9/arm builder
(raspberry pi) when run in parallel with other network intensive
tests. It appears that tcp on the loopback interface could do
with some tuning for better performance on Plan 9, but until
that's done, increasing the timeout from 5 to 10 seconds allows
this test to pass. This should have no effect on other platforms
where 5 seconds was already enough.
Change-Id: If310ee569cae8ca8f56346d84ce23803feb23a41
Reviewed-on: https://go-review.googlesource.com/94796
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
On Plan 9, sysReserve was ignoring the address hint and allocating
memory wherever it is available. This causes the new
TestArenaCollision test to fail on 32-bit Plan 9. We now use the
address hint in the specific case where sysReserve is extending the
process address space at its end, and similarly we contract the
address space in the case where sysFree is releasing memory at
the end.
Fixes#23860
Change-Id: Ia5254779ba8f1698c999832720a88de400b5f91a
Reviewed-on: https://go-review.googlesource.com/94776
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: David du Colombier <0intro@gmail.com>
Replace the test for nacl with testenv.MustHaveExec to also skip
test on iOS.
Change-Id: I6822714f6d71533d1b18bbb7894f6ad339d8aea1
Reviewed-on: https://go-review.googlesource.com/94755
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
It's used on Solaris to import symbols from shared libraries, e.g., in
golang.org/x/sys/unix and golang.org/x/net/internal/socket.
We could use a different directive but that would require build tags
in all the places that use it.
Updates #23672
Updates #23749
Change-Id: I47fcf72a6d2862e304204705979c2056c2f78ec5
Reviewed-on: https://go-review.googlesource.com/94018
Run-TryBot: Andrew Bonventre <andybons@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Now that we have memLimit, also having _MaxMem is a bit confusing.
Replace it with maxAlloc, which better conveys what it limits. We also
define maxAlloc slightly differently: since it's now clear that it
limits allocation size, we can account for a subtle difference between
32-bit and 64-bit.
Change-Id: Iac39048018cc0dae7f0919e25185fee4b3eed529
Reviewed-on: https://go-review.googlesource.com/85890
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently there's a detailed comment in lfstack_64bit.go about address
space limitations on various architectures. Since that's now relevant
to malloc, move it to a more prominent place in the documentation for
memLimitBits.
Updates #10460.
Change-Id: If9708291cf3a288057b8b3ba0ba6a59e3602bbd6
Reviewed-on: https://go-review.googlesource.com/85889
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently large sysReserve calls on some OSes don't actually reserve
the memory, but just check that it can be reserved. This was important
when we called sysReserve to "reserve" many gigabytes for the heap up
front, but now that we map memory in small increments as we need it,
this complication is no longer necessary.
This has one curious side benefit: currently, on Linux, allocations
that are large enough to be rejected by mmap wind up freezing the
application for a long time before it panics. This happens because
sysReserve doesn't reserve the memory, so sysMap calls mmap_fixed,
which calls mmap, which fails because the mapping is too large.
However, mmap_fixed doesn't inspect *why* mmap fails, so it falls back
to probing every page in the desired region individually with mincore
before performing an (otherwise dangerous) MAP_FIXED mapping, which
will also fail. This takes a long time for a large region. Now this
logic is gone, so the mmap failure leads to an immediate panic.
Updates #10460.
Change-Id: I8efe88c611871cdb14f99fadd09db83e0161ca2e
Reviewed-on: https://go-review.googlesource.com/85888
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
This replaces the contiguous heap arena mapping with a potentially
sparse mapping that can support heap mappings anywhere in the address
space.
This has several advantages over the current approach:
* There is no longer any limit on the size of the Go heap. (Currently
it's limited to 512GB.) Hence, this fixes#10460.
* It eliminates many failures modes of heap initialization and
growing. In particular it eliminates any possibility of panicking
with an address space conflict. This can happen for many reasons and
even causes a low but steady rate of TSAN test failures because of
conflicts with the TSAN runtime. See #16936 and #11993.
* It eliminates the notion of "non-reserved" heap, which was added
because creating huge address space reservations (particularly on
64-bit) led to huge process VSIZE. This was at best confusing and at
worst conflicted badly with ulimit -v. However, the non-reserved
heap logic is complicated, can race with other mappings in non-pure
Go binaries (e.g., #18976), and requires that the entire heap be
either reserved or non-reserved. We currently maintain the latter
property, but it's quite difficult to convince yourself of that, and
hence difficult to keep correct. This logic is still present, but
will be removed in the next CL.
* It fixes problems on 32-bit where skipping over parts of the address
space leads to mapping huge (and never-to-be-used) metadata
structures. See #19831.
This also completely rewrites and significantly simplifies
mheap.sysAlloc, which has been a source of many bugs. E.g., #21044,
#20259, #18651, and #13143 (and maybe #23222).
This change also makes it possible to allocate individual objects
larger than 512GB. As a result, a few tests that expected huge
allocations to fail needed to be changed to make even larger
allocations. However, at the moment attempting to allocate a humongous
object may cause the program to freeze for several minutes on Linux as
we fall back to probing every page with addrspace_free. That logic
(and this failure mode) will be removed in the next CL.
Fixes#10460.
Fixes#22204 (since it rewrites the code involved).
This slightly slows down compilebench and the x/benchmarks garbage
benchmark.
name old time/op new time/op delta
Template 184ms ± 1% 185ms ± 1% ~ (p=0.065 n=10+9)
Unicode 86.9ms ± 3% 86.3ms ± 1% ~ (p=0.631 n=10+10)
GoTypes 599ms ± 0% 602ms ± 0% +0.56% (p=0.000 n=10+9)
Compiler 2.87s ± 1% 2.89s ± 1% +0.51% (p=0.002 n=9+10)
SSA 7.29s ± 1% 7.25s ± 1% ~ (p=0.182 n=10+9)
Flate 118ms ± 2% 118ms ± 1% ~ (p=0.113 n=9+9)
GoParser 147ms ± 1% 148ms ± 1% +1.07% (p=0.003 n=9+10)
Reflect 401ms ± 1% 404ms ± 1% +0.71% (p=0.003 n=10+9)
Tar 175ms ± 1% 175ms ± 1% ~ (p=0.604 n=9+10)
XML 209ms ± 1% 210ms ± 1% ~ (p=0.052 n=10+10)
(https://perf.golang.org/search?q=upload:20171231.4)
name old time/op new time/op delta
Garbage/benchmem-MB=64-12 2.23ms ± 1% 2.25ms ± 1% +0.84% (p=0.000 n=19+19)
(https://perf.golang.org/search?q=upload:20171231.3)
Relative to the start of the sparse heap changes (starting at and
including "runtime: fix various contiguous bitmap assumptions"),
overall slowdown is roughly 1% on GC-intensive benchmarks:
name old time/op new time/op delta
Template 183ms ± 1% 185ms ± 1% +1.32% (p=0.000 n=9+9)
Unicode 84.9ms ± 2% 86.3ms ± 1% +1.65% (p=0.000 n=9+10)
GoTypes 595ms ± 1% 602ms ± 0% +1.19% (p=0.000 n=9+9)
Compiler 2.86s ± 0% 2.89s ± 1% +0.91% (p=0.000 n=9+10)
SSA 7.19s ± 0% 7.25s ± 1% +0.75% (p=0.000 n=8+9)
Flate 117ms ± 1% 118ms ± 1% +1.10% (p=0.000 n=10+9)
GoParser 146ms ± 2% 148ms ± 1% +1.48% (p=0.002 n=10+10)
Reflect 398ms ± 1% 404ms ± 1% +1.51% (p=0.000 n=10+9)
Tar 173ms ± 1% 175ms ± 1% +1.17% (p=0.000 n=10+10)
XML 208ms ± 1% 210ms ± 1% +0.62% (p=0.011 n=10+10)
[Geo mean] 369ms 373ms +1.17%
(https://perf.golang.org/search?q=upload:20180101.2)
name old time/op new time/op delta
Garbage/benchmem-MB=64-12 2.22ms ± 1% 2.25ms ± 1% +1.51% (p=0.000 n=20+19)
(https://perf.golang.org/search?q=upload:20180101.3)
Change-Id: I5daf4cfec24b252e5a57001f0a6c03f22479d0f0
Reviewed-on: https://go-review.googlesource.com/85887
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
This replaces all uses of the mheap_.arena_* fields outside of
mallocinit and sysAlloc. These fields fundamentally assume a
contiguous heap between two bounds, so eliminating these is necessary
for a sparse heap.
Many of these are replaced with checks for non-nil spans at the test
address (which in turn checks for a non-nil entry in the heap arena
array). Some of them are just for debugging and somewhat meaningless
with a sparse heap, so those we just delete.
Updates #10460.
Change-Id: I8345b95ffc610aed694f08f74633b3c63506a41f
Reviewed-on: https://go-review.googlesource.com/85886
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
This abstracts the remaining direct accesses to mheap.spans into new
mheap.setSpan and mheap.setSpans methods.
For #10460.
Change-Id: Id1db8bc5e34a77a9221032aa2e62d05322707364
Reviewed-on: https://go-review.googlesource.com/85884
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
This splits the heap bitmap into separate chunks for every 64MB of the
heap and introduces an index mapping from virtual address to metadata.
It modifies the heapBits abstraction to use this two-level structure.
Finally, it modifies heapBitsSetType to unroll the bitmap into the
object itself and then copy it out if the bitmap would span
discontiguous bitmap chunks.
This is a step toward supporting general sparse heaps, which will
eliminate address space conflict failures as well as the limit on the
heap size.
It's also advantageous for 32-bit. 32-bit already supports
discontiguous heaps by always starting the arena at address 0.
However, as a result, with a contiguous bitmap, if the kernel chooses
a high address (near 2GB) for a heap mapping, the runtime is forced to
map up to 128MB of heap bitmap. Now the runtime can map sections of
the bitmap for just the parts of the address space used by the heap.
Updates #10460.
This slightly slows down the x/garbage and compilebench benchmarks.
However, I think the slowdown is acceptably small.
name old time/op new time/op delta
Template 178ms ± 1% 180ms ± 1% +0.78% (p=0.029 n=10+10)
Unicode 85.7ms ± 2% 86.5ms ± 2% ~ (p=0.089 n=10+10)
GoTypes 594ms ± 0% 599ms ± 1% +0.70% (p=0.000 n=9+9)
Compiler 2.86s ± 0% 2.87s ± 0% +0.40% (p=0.001 n=9+9)
SSA 7.23s ± 2% 7.29s ± 2% +0.94% (p=0.029 n=10+10)
Flate 116ms ± 1% 117ms ± 1% +0.99% (p=0.000 n=9+9)
GoParser 146ms ± 1% 146ms ± 0% ~ (p=0.193 n=10+7)
Reflect 399ms ± 0% 403ms ± 1% +0.89% (p=0.001 n=10+10)
Tar 173ms ± 1% 174ms ± 1% +0.91% (p=0.013 n=10+9)
XML 208ms ± 1% 210ms ± 1% +0.93% (p=0.000 n=10+10)
[Geo mean] 368ms 371ms +0.79%
name old time/op new time/op delta
Garbage/benchmem-MB=64-12 2.17ms ± 1% 2.21ms ± 1% +2.15% (p=0.000 n=20+20)
Change-Id: I037fd283221976f4f61249119d6b97b100bcbc66
Reviewed-on: https://go-review.googlesource.com/85883
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
There are various places that assume the heap bitmap is contiguous and
scan it sequentially. We're about to split up the heap bitmap. This
commit modifies all of these except heapBitsSetType to use the
heapBits abstractions so they can transparently switch to a
discontiguous bitmap.
Updates #10460. This is a step toward supporting sparse heaps.
Change-Id: I2f3994a5785e4dccb66602fb3950bbd290d9392c
Reviewed-on: https://go-review.googlesource.com/85882
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently the heap bitamp is laid in reverse order in memory relative
to the heap itself. This was originally done out of "excessive
cleverness" so that computing a bitmap pointer could load only the
arena_start field and so that heaps could be more contiguous by
growing the arena and the bitmap out from a common center point.
However, this appears to have no actual performance benefit, it
complicates nearly every use of the bitmap, and it makes already
confusing code more confusing. Furthermore, it's still possible to use
a single field (the new bitmap_delta) for the bitmap pointer
computation by employing slightly different excessive cleverness.
Hence, this CL puts the bitmap into forward order.
This is a (very) updated version of CL 9404.
Change-Id: I743587cc626c4ecd81e660658bad85b54584108c
Reviewed-on: https://go-review.googlesource.com/85881
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
The logic in the spanOf* functions is open-coded in a lot of places
right now. Replace these with calls to the spanOf* functions.
Change-Id: I3cc996aceb9a529b60fea7ec6fef22008c012978
Reviewed-on: https://go-review.googlesource.com/85880
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
I think we'd forgotten about the mheap.lookup APIs when we introduced
spanOf*, but, at any rate, the spanOf* functions are used far more
widely at this point, so this CL eliminates the mheap.lookup*
functions in favor of spanOf*.
Change-Id: I15facd0856e238bb75d990e838a092b5bef5bdfc
Reviewed-on: https://go-review.googlesource.com/85879
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
heapBitsForObject does two things: it finds the base of the object and
it creates the heapBits for the base of the object. There are several
places where we just care about the base of the object. Furthermore,
greyobject only needs the heapBits in the checkmark path and can
easily compute them only when needed. Once we eliminate passing the
heap bits to grayobject, almost all uses of heapBitsForObject don't
need the heap bits.
Hence, this splits heapBitsForObject into findObject and
heapBitsForAddr (the latter already exists), removes the hbits
argument to grayobject, and replaces all heapBitsForObject calls with
calls to findObject.
In addition to making things cleaner overall, heapBitsForAddr is going
to get more expensive shortly, so it's important that we don't do it
needlessly.
Note that there's an interesting performance pitfall here. I had
originally moved findObject to mheap.go, since it made more sense
there. However, that leads to a ~2% slow down and a whopping 11%
increase in L1 icache misses on both the x/garbage and compilebench
benchmarks. This suggests we may want to be more principled about
this, but, for now, let's just leave findObject in mbitmap.go.
(I tried to make findObject small enough to inline by splitting out
the error case, but, sadly, wasn't quite able to get it under the
inlining budget.)
Change-Id: I7bcb92f383ade565d22a9f2494e4c66fd513fb10
Reviewed-on: https://go-review.googlesource.com/85878
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
These functions all serve essentially the same purpose. mlookup is
used in only one place and findObject in only three. Use
heapBitsForObject instead, which is the most optimized implementation.
(This may seem slightly silly because none of these uses care about
the heap bits, but we're about to split up the functionality of
heapBitsForObject anyway. At that point, findObject will rise from the
ashes.)
Change-Id: I906468c972be095dd23cf2404a7d4434e802f250
Reviewed-on: https://go-review.googlesource.com/85877
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
I was spelunking Linux's address space code and found that some of the
information about maximum virtual addresses in lfstack's comments was
out of date. This expands and updates the comment.
Change-Id: I9f54b23e6b266b3c5cc20259a849231fb751f6e7
Reviewed-on: https://go-review.googlesource.com/85875
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
