bug278.go:18: error: invalid left hand side of assignment
bug278.go:19: error: array is not addressable
bug278.go:21: error: invalid left hand side of assignment
bug278.go:22: error: invalid left hand side of assignment
R=rsc
CC=golang-dev
https://golang.org/cl/2122042
The gccgo compiler is smart enough to not make something which
is not used. Use global variables to defeat this
optimization.
R=rsc
CC=golang-dev
https://golang.org/cl/2129041
Another case where gccgo and gc report similar but not
identical errors for a recursive interface.
bug251.go:11: error: invalid recursive interface
R=rsc
CC=golang-dev
https://golang.org/cl/2094041
This introduces GC_ERROR to mark an error only issued by the
gc compiler. GCCGO_ERROR already exists to mark errors only
issued by the gccgo compiler. Obviously these should be used
sparingly.
bug195.go:9: error: interface contains embedded non-interface
bug195.go:12: error: interface contains embedded non-interface
bug195.go:15: error: interface contains embedded non-interface
bug195.go:18: error: invalid recursive interface
bug195.go:22: error: invalid recursive interface
R=rsc
CC=golang-dev
https://golang.org/cl/2040043
Also, if the header is bad, exit with a non-zero status.
Other calls to Brdline in the tree, by category:
Reading symbol name from object file:
./cmd/5l/obj.c:486: name = Brdline(f, '\0');
./cmd/6l/obj.c:535: name = Brdline(f, '\0');
./cmd/8l/obj.c:564: name = Brdline(f, '\0');
./libmach/sym.c:292: cp = Brdline(bp, '\0');
Reading archive header line (fixed, short):
./cmd/gc/lex.c:287: if((a = Brdline(b, '\n')) == nil)
./cmd/gc/lex.c:303: if((p = Brdline(b, '\n')) == nil)
Reading object file header line (fixed, short):
./cmd/ld/lib.c:421: line = Brdline(f, '\n');
Reading undefined symbol list (unused code):
./cmd/ld/lib.c:773: while((l = Brdline(b, '\n')) != nil){
Implementing Brdstr:
./libbio/brdstr.c:36: p = Brdline(bp, delim);
The symbol names ones will cause a problem loudly if they
fail: they'll error out with symbol name too long. This means
that you can't define an enormous struct without giving the
type a name and then stick it in an interface, because the
type's symbol name will be too long for the object file.
Since this will be a loud failure instead of a silent one,
I'm willing to wait until it comes up in practice.
R=r
CC=golang-dev
https://golang.org/cl/1982041
remove the print statements.
This change is because of the port of gccgo to RTEMS.
These tests use the GCC DejaGNU framework. In some cases,
the tests need to be run on qemu where the status code
cannot be sent back to DejaGNU, so it prints the exit status
by putting a wrapper around the exit and abort calls.
This testcase closes the stdout, and hence prohibits DejaGNU
from knowing the status in such cases, and causes this test
to be wrongly declared as a failure.
R=rsc, iant
CC=golang-dev
https://golang.org/cl/1792042
* Code for assignment, conversions now mirrors spec.
* Changed some snprint -> smprint.
* Renamed runtime functions to separate
interface conversions from type assertions:
convT2I, assertI2T, etc.
* Correct checking of \U sequences.
Fixes#840.
Fixes#830.
Fixes#778.
R=ken2
CC=golang-dev
https://golang.org/cl/1303042
note that sortmain.go has been run through hg gofmt;
only the formatting of the day initializers changed.
i'm happy to revert that formatting if you'd prefer.
stop on error in doc/progs/run
R=r
CC=golang-dev
https://golang.org/cl/850041
bug121.go:12:3: error: name list not allowed in interface type
bug121.go:16:2: error: expected signature or type name
semi1.go:10:76: error: unexpected semicolon or newline before ‘{’
semi1.go:10:5: error: reference to undefined name ‘x’
semi1.go:10:8: error: reference to undefined name ‘y’
semi1.go:12:3: error: reference to undefined name ‘z’
semi2.go:10:79: error: unexpected semicolon or newline before ‘{’
semi2.go:10:9: error: reference to undefined name ‘x’
semi3.go:10:79: error: unexpected semicolon or newline before ‘{’
semi3.go:10:6: error: reference to undefined name ‘x’
semi3.go:10:9: error: reference to undefined name ‘y’
semi3.go:10:12: error: reference to undefined name ‘z’
semi3.go:12:3: error: reference to undefined name ‘z’
semi4.go:11:2: error: unexpected semicolon or newline before ‘{’
semi4.go:10:6: error: reference to undefined name ‘x’
semi4.go:12:3: error: reference to undefined name ‘z’
semi5.go:10:1: error: unexpected semicolon or newline before ‘{’
semi7.go:11:2: error: unexpected semicolon or newline before ‘else’
semi7.go:10:5: error: reference to undefined name ‘x’
slice.go:9:11: error: missing lower bound in slice expression
slice.go:9:9: error: reference to undefined name ‘y’
slice.go:9:12: error: reference to undefined name ‘z’
R=rsc
CC=golang-dev
https://golang.org/cl/201061
bug249.go:10:5: error: incompatible type in initialization
bug249.go:26:5: error: incompatible type in initialization
R=rsc
CC=golang-dev
https://golang.org/cl/198058
I have to admit that "cannot use type p.T as type p.T" is a
bit weak. 8g gives a similar error ("cannot use v1 (type p.T)
as type p.T in assignment").
bug3.go:37:5: error: incompatible type in initialization (incompatible type for method ‘M’ (different parameter types))
bug3.go:38:5: error: incompatible type in initialization (incompatible type for method ‘M’ (different parameter types))
bug3.go:43:5: error: incompatible type in initialization (incompatible type for method ‘M’ (different parameter types))
bug3.go:44:5: error: incompatible type in initialization (incompatible type for method ‘M’ (different parameter types))
bug3.go:49:5: error: incompatible types in assignment (cannot use type p.T as type p.T)
bug3.go:50:5: error: incompatible types in assignment (cannot use type p.T as type p.T)
bug3.go:55:5: error: incompatible types in assignment (incompatible type for method ‘M’ (different parameter types))
bug3.go:56:5: error: incompatible types in assignment (incompatible type for method ‘M’ (different parameter types))
bug3.go:57:6: error: incompatible types in assignment (incompatible type for method ‘M’ (different parameter types))
bug3.go:58:6: error: incompatible types in assignment (incompatible type for method ‘M’ (different parameter types))
bug3.go:59:5: error: incompatible types in assignment (incompatible type for method ‘M’ (different parameter types))
bug3.go:60:5: error: incompatible types in assignment (incompatible type for method ‘M’ (different parameter types))
bug3.go:61:6: error: incompatible types in assignment (incompatible type for method ‘M’ (different parameter types))
bug3.go:62:6: error: incompatible types in assignment (incompatible type for method ‘M’ (different parameter types))
R=rsc
CC=golang-dev
https://golang.org/cl/199044
bug228.go:11:25: error: invalid use of ‘...’
bug228.go:13:13: error: ‘...’ only permits one name
bug228.go:15:20: error: ‘...’ must be last parameter
bug228.go:17:7: error: expected type
bug228.go:19:8: error: expected type
R=rsc
CC=golang-dev
https://golang.org/cl/196077
bonus: type switch now detects multiple uses of identical interface types.
bonus: interface types are now order-independent, following the spec.
R=ken2
CC=golang-dev
https://golang.org/cl/194053
* better error for lookup of unexported field
* do not assign "ideal string" type to typed string literal
* do not confuse methods and fields during interface check
Fixes#410.
Fixes#411.
Fixes#426.
R=ken2
https://golang.org/cl/179069
Pull the struct into a single line, since 6g reports the error
on the last line of the struct definition and gccgo reports it
on the first line.
6g:
bug215.go:12: invalid recursive type A
gccgo:
bug215.go:12:6: error: invalid recursive type ‘A’
R=rsc
https://golang.org/cl/180044
bug205.go:14:12: error: index must be integer
bug205.go:15:12: error: index must be integer
bug205.go:16:12: error: incompatible type for map index
R=rsc
DELTA=2 (0 added, 0 deleted, 2 changed)
OCL=35957
CL=35960
bug197.go:10:5: error: incompatible type in initialization
bug197.go:11:5: error: incompatible type in initialization
bug197.go:12:5: error: incompatible type in initialization
bug197.go:13:5: error: incompatible type in initialization
bug197.go:20:13: error: incompatible types in binary expression
bug197.go:21:27: error: incompatible types in binary expression
R=rsc
DELTA=6 (0 added, 0 deleted, 6 changed)
OCL=34135
CL=34177
6g's error for I4 is not quite accurate
(it calls I4 a non-interface) but also
not a crash or infinite loop.
R=iant
DELTA=15 (15 added, 0 deleted, 0 changed)
OCL=33701
CL=33709
bug165.go:13:6: error: invalid recursive type 'S'
This is a different line from the 6g error message, which is
"invalid map key type". I accomodated both compilers by
merging the line.
bug188.go:13:2: error: unexpected reference to package
I made the error message less specific, which I think is fine
here.
R=rsc
DELTA=2 (0 added, 0 deleted, 2 changed)
OCL=33398
CL=33426
bug039.go:6:7: error: redefinition of 'x'
bug039.go:5:1: note: previous definition of 'x' was here
bug049.go:6:9: error: incompatible types in binary expression
bug062.go:6:7: error: incompatible type in initialization
bug086.go:5:1: error: control reaches end of non-void function
bug103.go:8:2: error: variable has no type
bug121.go:9:2: error: expected signature or type name
bug131.go:7:7: error: incompatible type in initialization
bug165.go:10:8: error: expected complete type
bug171.go:5:1: error: control reaches end of non-void function
bug171.go:6:1: error: control reaches end of non-void function
bug172.go:7:6: error: expected integer type
bug182.go:7:2: error: if statement expects boolean expression
bug183.go:10:5: error: incompatible types in assignment
bug183.go:19:5: error: incompatible types in assignment
R=rsc
DELTA=15 (0 added, 0 deleted, 15 changed)
OCL=33168
CL=33175
