Fixes#14522.
As I said on that issue:
----
This is a progressive JPEG image. There are two dimensions of
progressivity: spectral selection (variables zs and ze in scan.go,
ranging in [0, 63]) and successive approximation (variables ah and al in
scan.go, ranging in [0, 8), from LSB to MSB, although ah=0 implicitly
means ah=8).
For this particular image, there are three components, and the SOS
markers contain this progression:
zs, ze, ah, al: 0 0 0 0 components: 0, 1, 2
zs, ze, ah, al: 1 63 0 0 components: 1
zs, ze, ah, al: 1 63 0 0 components: 2
zs, ze, ah, al: 1 63 0 2 components: 0
zs, ze, ah, al: 1 10 2 1 components: 0
zs, ze, ah, al: 11 63 2 1 components: 0
zs, ze, ah, al: 1 10 1 0 components: 0
The combination of all of these is complete (i.e. spectra 0 to 63 and
bits 8 exclusive to 0) for components 1 and 2, but it is incomplete for
component 0 (the luma component). In particular, there is no data for
component 0, spectra 11 to 63 and bits 1 exclusive to 0.
The image/jpeg code, as of Go 1.6, waits until both dimensions are
complete before performing the de-quantization, IDCT and copy to an
*image.YCbCr. This is the "if zigEnd != blockSize-1 || al != 0 { ...
continue }" code and associated commentary in scan.go.
Almost all progressive JPEG images end up complete in both dimensions
for all components, but this particular image is incomplete for
component 0, so the Go code never writes anything to the Y values of the
resultant *image.YCbCr, which is why the broken output is so dark (but
still looks recognizable in terms of red and blue hues).
My reading of the ITU T.81 JPEG specification (Annex G) doesn't
explicitly say that this is a valid image, but it also doesn't rule it
out.
In any case, the fix is, for progressive JPEG images, to always
reconstruct the decoded blocks (by performing the de-quantization, IDCT
and copy to an *image.YCbCr), regardless of whether or not they end up
complete. Note that, in Go, the jpeg.Decode function does not return
until the entire image is decoded, so we still only want to reconstruct
each block once, not once per SOS (Start Of Scan) marker.
----
A test image was also added, based on video-001.progressive.jpeg. When
decoding that image, inserting a
println("nComp, zs, ze, ah, al:", nComp, zigStart, zigEnd, ah, al)
into decoder.processSOS in scan.go prints:
nComp, zs, ze, ah, al: 3 0 0 0 1
nComp, zs, ze, ah, al: 1 1 5 0 2
nComp, zs, ze, ah, al: 1 1 63 0 1
nComp, zs, ze, ah, al: 1 1 63 0 1
nComp, zs, ze, ah, al: 1 6 63 0 2
nComp, zs, ze, ah, al: 1 1 63 2 1
nComp, zs, ze, ah, al: 3 0 0 1 0
nComp, zs, ze, ah, al: 1 1 63 1 0
nComp, zs, ze, ah, al: 1 1 63 1 0
nComp, zs, ze, ah, al: 1 1 63 1 0
In other words, video-001.progressive.jpeg contains 10 different scans.
This little program below drops half of them (remembering to keep the
"\xff\xd9" End of Image marker):
----
package main
import (
"bytes"
"io/ioutil"
"log"
)
func main() {
sos := []byte{0xff, 0xda}
eoi := []byte{0xff, 0xd9}
src, err := ioutil.ReadFile("video-001.progressive.jpeg")
if err != nil {
log.Fatal(err)
}
b := bytes.Split(src, sos)
println(len(b)) // Prints 11.
dst := bytes.Join(b[:5], sos)
dst = append(dst, eoi...)
if err := ioutil.WriteFile("video-001.progressive.truncated.jpeg", dst, 0666); err != nil {
log.Fatal(err)
}
}
----
The video-001.progressive.truncated.jpeg was converted to png via
libjpeg and ImageMagick:
djpeg -nosmooth video-001.progressive.truncated.jpeg > tmp.tga
convert tmp.tga video-001.progressive.truncated.png
rm tmp.tga
Change-Id: I72b20cd4fb6746d36d8d4d587f891fb3bc641f84
Reviewed-on: https://go-review.googlesource.com/21062
Reviewed-by: Rob Pike <r@golang.org>
In tostruct0 and tofunargs we take a list of nodes, transform them into
a slice of Fields, set the fields on a type, then use the IterFields
iterator to iterate over the list again to see if any of them are
broken.
As we know the slice of fielde-we just created it-we can combine these two
interations into one pass over the fields.
Change-Id: I8b04c90fb32fd6c3b1752cfc607128a634ee06c5
Reviewed-on: https://go-review.googlesource.com/21350
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This allows us to get rid of Isptr and Issigned. Still some code to
clean up for Isint, Isfloat, and Iscomplex.
CL produced mechanically using gofmt -w -r.
Passes toolstash -cmp.
Change-Id: If4f807bb7f2b357288d2547be2380eb511875786
Reviewed-on: https://go-review.googlesource.com/21339
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
* This is an improved version of an earlier patch.
* Verified with gcc up to 100.
* Limited to two instructions based on costs from
https://gmplib.org/~tege/x86-timing.pdf
Change-Id: Ib7c37de6fd8e0ba554459b15c7409508cbcf6728
Reviewed-on: https://go-review.googlesource.com/21103
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Replace Isfixedarray, Isslice, and Isinter with the IsArray, IsSlice,
and IsInterface methods added for SSA. Rewrite performed mechanically
using gofmt -w -r "Isfoo(t) -> t.IsFoo()".
Because the IsFoo methods panic when given a nil pointer, a handful of
call sites had to be modified to check for nil Type values. These
aren't strictly necessary, because nil Type values should only occur
in invalid Go source programs, so it would be okay if we panicked on
them and gave up type checking the rest of the package. However, there
are a couple regress tests that expect we continue, so add checks to
keep those tests passing. (See #15029.)
Passes toolstash -cmp.
Change-Id: I511c6ac4cfdf3f9cbdb3e52a5fa91b6d09d82f80
Reviewed-on: https://go-review.googlesource.com/21336
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Apparently I’m having a hard time following my
own naming scheme.
Change-Id: I99c801bef09fa65c1f0e8ecc2fba154a495e9c17
Reviewed-on: https://go-review.googlesource.com/21332
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
This removes almost all direct access to
Type’s heavily overloaded Type field.
Mostly generated by eg, manually checked.
Significant manual changes:
* reflect.go's typPkg used Type indiscriminately.
Use it only for specific etypes.
* gen.go's visitComponents contained a usage of Type
with structs. Using Type for structs no longer
occurs, and the Fatal contained therein has not triggered,
so it has been axed.
* Scary code in cgen.go's cgen_slice is now explicitly scary.
Passes toolstash -cmp.
Change-Id: I2dbfb3c959da7ae239f964d83898c204affcabc6
Reviewed-on: https://go-review.googlesource.com/21331
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Also, add two uses of Key and Val that I missed earlier.
As before, direct writes to Down and Type remain in bimport.
Change-Id: I487aa975926b30092db1ad74ace17994697117c1
Reviewed-on: https://go-review.googlesource.com/21330
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Partial revert of https://golang.org/cl/20967 which
I can't reproduce and actually breaks me more.
Fixes#14901
Change-Id: I8cce443fbd95f5f6f2a5b6a4b9f2faab36167a12
Reviewed-on: https://go-review.googlesource.com/21292
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Previously, t.IsPtr() reported whether t was represented with a
pointer, but some of its callers expected it to report whether t is an
actual Go pointer. Resolve this by renaming t.IsPtr to t.IsPtrShaped
and adding a new t.IsPtr method to report Go pointer types.
Updated a couple callers in gc/ssa.go to use IsPtr instead of
IsPtrShaped.
Passes toolstash -cmp.
Updates #15028.
Change-Id: I0a8154b5822ad8a6ad296419126ad01a3d2a5dc5
Reviewed-on: https://go-review.googlesource.com/21232
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Changes generated by eg and manually checked.
Isfixedarray, Isslice, and many other
Type-related functions in subr.go should
either be deleted or moved to type.go.
Later, though; the game now is cleanup via encapsulation.
Passes toolstash -cmp.
Change-Id: I83dd8816f6263b74367d23c2719a08c362e330f9
Reviewed-on: https://go-review.googlesource.com/21303
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Happens occasionally for boolean phis was used as a control.
Change-Id: Ie0f2483e9004c1706751d8dfb25ee2e5106d917e
Reviewed-on: https://go-review.googlesource.com/21310
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The Read logic should not assume that only (0, io.EOF) is returned
instead of (n, io.EOF) where n is positive.
The fix done here is very similar to the fix to compress/zlib
in CL/20292.
Change-Id: Icb76258cdcf8cfa386a60bab330fefde46fc071d
Reviewed-on: https://go-review.googlesource.com/21308
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It is valid for io.Reader to return (n, io.EOF) where n is positive.
The unit test should not fail if io.EOF is returned when read until
the end.
Change-Id: I7b918e3cc03db8b90c8aa58f4c0f7806a1d4af7e
Reviewed-on: https://go-review.googlesource.com/21307
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
s390x doesn't introduce any new assembly syntax. There are a few
instructions which require the operands to be reordered, notably
the storage-storage instructions that put the length into From3 so
that the memory operands can be put into From and To.
The assembly test currently covers a subset of instructions but
tries to hit edge cases as much as possible. Unlike the other ports
it can be linked as an executable to make disassembling it easy.
It would be nice to autogenerate it at some point in the future.
Change-Id: I8dd542c34b9e450b8129d46693a5acb0ded791ce
Reviewed-on: https://go-review.googlesource.com/21253
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
substAny needs access to many internal details
of gc.Type. substArgTypes comes along for the ride.
Change-Id: I430a4edfd54a1266522f7a9818e5e7b5da72479c
Reviewed-on: https://go-review.googlesource.com/21250
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Based on the ppc64 port.
s390x supports 2, 4 and 6 byte instructions and Go assembly
instructions sometimes map to several s390x instructions. The
assembler loops until a fixed point is reached in order to use
branch instructions that can only handle a short offset in a
similar way to other ports.
Change-Id: I4278bf46aca35a96ca9cea0857e6229643c9c1e3
Reviewed-on: https://go-review.googlesource.com/20942
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Previously if we were only using the low bits of AuxInt,
the high bits were ignored and could be junk. This CL
changes that behavior to define the high bits to be the
sign-extended version of the low bits for all cases.
There are 2 main benefits:
- Deterministic representation. This helps with CSE.
(Const8 [0x1]) and (Const8 [0x101]) used to be the same "value"
but CSE couldn't see them as such.
- Testability. We can check that all ops leave AuxInt in a state
consistent with the new rule. In the old scheme, it was hard
to check whether a rule correctly used only the low-order bits.
Side benefits:
- ==0 and !=0 tests are easier.
Drawbacks:
- This differs from the runtime representation in registers,
where it is important that we allow upper bits to be undefined
(so we're not sign/zero-extending all the time).
- Ops that treat AuxInt as unsigned (shifts, mostly) need to be
a bit more careful.
Change-Id: I9a685ff27e36dc03287c9ab1cecd6c0b4045c819
Reviewed-on: https://go-review.googlesource.com/21256
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Flip around the composition order of the http.Response.Body's
gzip.Reader vs. the reader which keeps track of waiting to see the end
of the HTTP/1 response framing (whether that's a Content-Length or
HTTP/1.1 chunking).
Previously:
user -> http.Response.Body
-> bodyEOFSignal
-> gzipReader
-> gzip.Reader
-> bufio.Reader
[ -> http/1.1 de-chunking reader ] optional
-> http1 framing *body
But because bodyEOFSignal was waiting to see an EOF from the
underlying gzip.Reader before reusing the connection, and gzip.Reader
(or more specifically: the flate.Reader) wasn't returning an early
io.EOF with the final chunk, the bodyEOfSignal was never releasing the
connection, because the EOF from the http1 framing was read by a party
who didn't care about it yet: the helper bufio.Reader created to do
byte-at-a-time reading in the flate.Reader.
Flip the read composition around to:
user -> http.Response.Body
-> gzipReader
-> gzip.Reader
-> bufio.Reader
-> bodyEOFSignal
[ -> http/1.1 de-chunking reader ] optional
-> http1 framing *body
Now when gzip.Reader does its byte-at-a-time reading via the
bufio.Reader, the bufio.Reader will do its big reads against the
bodyEOFSignal reader instead, which will then see the underlying http1
framing EOF, and be able to reuse the connection.
Updates google/go-github#317
Updates #14867
And related abandoned fix to flate.Reader: https://golang.org/cl/21290
Change-Id: I3729dfdffe832ad943b84f4734b0f59b0e834749
Reviewed-on: https://go-review.googlesource.com/21291
Reviewed-by: David Symonds <dsymonds@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Record total number of relocations, pcdata, automatics, funcdata and files in
object file and use these numbers in the linker to allocate contiguous
slices to later be filled by the defined symbols.
name old secs new secs delta
LinkCmdGo 0.52 ± 3% 0.49 ± 3% -4.21% (p=0.000 n=91+92)
LinkJuju 4.48 ± 4% 4.21 ± 7% -6.08% (p=0.000 n=96+100)
name old MaxRSS new MaxRSS delta
LinkCmdGo 122k ± 2% 120k ± 4% -1.66% (p=0.000 n=98+93)
LinkJuju 799k ± 5% 865k ± 8% +8.29% (p=0.000 n=89+99)
GOGC=off
name old secs new secs delta
LinkCmdGo 0.42 ± 2% 0.41 ± 0% -2.98% (p=0.000 n=89+70)
LinkJuju 3.61 ± 0% 3.52 ± 1% -2.46% (p=0.000 n=80+89)
name old MaxRSS new MaxRSS delta
LinkCmdGo 130k ± 1% 128k ± 1% -1.33% (p=0.000 n=100+100)
LinkJuju 1.00M ± 0% 0.99M ± 0% -1.70% (p=0.000 n=100+100)
Change-Id: Ie08f6ccd4311bb78d8950548c678230a58635c73
Reviewed-on: https://go-review.googlesource.com/21026
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The CMP* family of instructions are longer than their TEST counterparts by one byte.
After this change, my go tool has 13 cmp.*$0x0 instructions, compared to 5612 before.
Change-Id: Ieb87d65657917e494c0e4b711a7ba2918ae27610
Reviewed-on: https://go-review.googlesource.com/21255
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Simplify the handling of zero padding in fmt_integer and
fmt_float to not require any adjustment of the format flags.
Note that f.zero can only be true when padding to the left
and f.wid is always greater than or equal to 0.
Change-Id: I204b57d103c0eac13d86995992f2b26209196925
Reviewed-on: https://go-review.googlesource.com/21185
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
These are the first of several convenience
constructors for types.
They are part of type field encapsulation.
This removes most external writes to TARRAY Type and Bound fields.
substAny still directly fiddles with the .Type field.
substAny generally needs access to Type internals.
It will be moved to type.go in a future CL.
bimport still directly writes the .Type field.
This is hard to change.
Also of note:
* inl.go contains an (apparently irrelevant) bug fix:
as.Right was given the wrong type.
vararrtype was previously unused.
* I believe that aindex (subr.go) never creates slices,
but it is safer to keep existing behavior.
The removal of -1 as a constant there is part
of hiding that implementation detail.
Future CLs will finish that job.
Passes toolstash -cmp.
Change-Id: If09bf001a874d7dba08e9ad0bcd6722860af4b91
Reviewed-on: https://go-review.googlesource.com/21249
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Previously format argument was detected via scanning func type args.
This didn't work when func type couldn't be determined if the func
is declared in the external package. Fall back to scanning for
the first string call argument in this case.
Fixes#14754
Change-Id: I571cc29684cc641bc87882002ef474cf1481e9e2
Reviewed-on: https://go-review.googlesource.com/21023
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
This is a change improving consistency in the source tree.
The pattern foo &= ^bar, was only used six times in src/ directory.
The usage of the supported &^ (bit clear / AND NOT) operator is way more
common, about factor 10x.
Change-Id: If26a2994fd81d23d42189bee00245eb84e672cf3
Reviewed-on: https://go-review.googlesource.com/21224
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
RFC 2047 recommends a maximum length of 75 characters for
encoded-words. Due to a bug, encoded-words were limited to 77
characters instead of 75.
Change-Id: I2ff9d013ab922df6fd542464ace70b1c46dc7ae7
Reviewed-on: https://go-review.googlesource.com/20918
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Add a "HuffmanOnly" compression level, where the input is
only entropy encoded.
The output is fully inflate compatible. Typical compression
is reduction is about 50% of typical level 1 compression, however
the compression time is very stable, and does not vary as much as
nearly as much level 1 compression (or Snappy).
This mode is useful for:
* HTTP compression in a CPU limited environment.
* Entropy encoding Snappy compressed data, for archiving, etc.
* Compression where compression time needs to be predictable.
* Fast network transfer.
Snappy "usually" performs inbetween this and level 1 compression-wise,
but at the same speed as "Huffman", so this is not a replacement,
but a good supplement for Snappy, since it usually can compress
Snappy output further.
This is implemented as level -2, since this would be too much of a
compression reduction to replace level 1.
>go test -bench=Encode -cpu=1
BenchmarkEncodeDigitsHuffman1e4 30000 52334 ns/op 191.08 MB/s
BenchmarkEncodeDigitsHuffman1e5 3000 518343 ns/op 192.92 MB/s
BenchmarkEncodeDigitsHuffman1e6 300 5356884 ns/op 186.68 MB/s
BenchmarkEncodeDigitsSpeed1e4 5000 324214 ns/op 30.84 MB/s
BenchmarkEncodeDigitsSpeed1e5 500 3952614 ns/op 25.30 MB/s
BenchmarkEncodeDigitsSpeed1e6 30 40760350 ns/op 24.53 MB/s
BenchmarkEncodeDigitsDefault1e4 5000 387056 ns/op 25.84 MB/s
BenchmarkEncodeDigitsDefault1e5 300 5950614 ns/op 16.80 MB/s
BenchmarkEncodeDigitsDefault1e6 20 63842195 ns/op 15.66 MB/s
BenchmarkEncodeDigitsCompress1e4 5000 391859 ns/op 25.52 MB/s
BenchmarkEncodeDigitsCompress1e5 300 5707112 ns/op 17.52 MB/s
BenchmarkEncodeDigitsCompress1e6 20 59839465 ns/op 16.71 MB/s
BenchmarkEncodeTwainHuffman1e4 20000 73498 ns/op 136.06 MB/s
BenchmarkEncodeTwainHuffman1e5 2000 595892 ns/op 167.82 MB/s
BenchmarkEncodeTwainHuffman1e6 200 6059016 ns/op 165.04 MB/s
BenchmarkEncodeTwainSpeed1e4 5000 321212 ns/op 31.13 MB/s
BenchmarkEncodeTwainSpeed1e5 500 2823873 ns/op 35.41 MB/s
BenchmarkEncodeTwainSpeed1e6 50 27237864 ns/op 36.71 MB/s
BenchmarkEncodeTwainDefault1e4 3000 454634 ns/op 22.00 MB/s
BenchmarkEncodeTwainDefault1e5 200 6859537 ns/op 14.58 MB/s
BenchmarkEncodeTwainDefault1e6 20 71547405 ns/op 13.98 MB/s
BenchmarkEncodeTwainCompress1e4 3000 462307 ns/op 21.63 MB/s
BenchmarkEncodeTwainCompress1e5 200 7534992 ns/op 13.27 MB/s
BenchmarkEncodeTwainCompress1e6 20 80353365 ns/op 12.45 MB/s
PASS
ok compress/flate 55.333s
Change-Id: I8e12ad13220e50d4cf7ddba6f292333efad61b0c
Reviewed-on: https://go-review.googlesource.com/20982
Reviewed-by: Joe Tsai <joetsai@digital-static.net>
Reviewed-by: Nigel Tao <nigeltao@golang.org>
Patch originally from Steven Hartland. Tweaked a bit & added a test.
Fixes#7197
Change-Id: I09012b4674e7c641dba31a24e9758cedb898d3ee
Reviewed-on: https://go-review.googlesource.com/21196
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
This was the only unconverted instance.
Change-Id: Ic0ba75824614fcd1e055316e62e26acd06801dd1
Reviewed-on: https://go-review.googlesource.com/21247
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TestEvalSymlinksCanonicalNames fails on system where 8dot3 name creation
is disabled. Add new test that temporarily changes 8dot3 name creation
file system setting and runs TestEvalSymlinksCanonicalNames under that
setting. New test requires administrator access and modifies important
file system setting, so don't run the test unless explicitly requested
by specifying new test flag.
Updates #13980
Change-Id: I598b5b956e6bd0ed556e79d350cb244808c89c0b
Reviewed-on: https://go-review.googlesource.com/20863
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
The previous rules to combine indexed loads produced addresses like:
From: obj.Addr{
Type: TYPE_MEM,
Reg: REG_CX,
Name: NAME_AUTO,
Offset: 121,
...
}
which are erroneous because NAME_AUTO implies a base register of
REG_SP, and cmd/internal/obj/x86 makes many assumptions to this
effect. Note that previously we were also producing an extra "ADDQ
SP, CX" instruction, so indexing off of SP was already handled.
The approach taken by this CL to address the problem is to instead
produce addresses like:
From: obj.Addr{
Type: TYPE_MEM,
Reg: REG_SP,
Name: NAME_AUTO,
Offset: 121,
Index: REG_CX,
Scale: 1,
}
and to omit the "ADDQ SP, CX" instruction.
Downside to this approach is it requires adding a lot of new
MOV[WLQ]loadidx1 instructions that nearly duplicate functionality of
the existing MOV[WLQ]loadidx[248] instructions, but with a different
Scale.
Fixes#15001.
Change-Id: Iad9a1a41e5e2552f8d22e3ba975e4ea0862dffd2
Reviewed-on: https://go-review.googlesource.com/21245
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
See #14874
This change adds a compiler optimization for pointer shaped convT2I.
Since itab symbols are now emitted by the compiler, the itab address can
be directly moved into the iface structure.
Change-Id: I311483af544519ca682c5f872960717ead772f26
Reviewed-on: https://go-review.googlesource.com/20901
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
See #14874
This change tells the linker to collect all the itablink symbols and
collect them so that moduledata can have a slice of all compiler
generated itabs.
The logic is shamelessly adapted from what is done with typelink symbols.
Change-Id: Ie93b59acf0fcba908a876d506afbf796f222dbac
Reviewed-on: https://go-review.googlesource.com/20889
Reviewed-by: Keith Randall <khr@golang.org>
See #14874
This change tells the compiler to emit itab and itablink symbols in
situations where they could be useful; however the compiled code does
not actually make use of the new symbols yet.
Change-Id: I0db3e6ec0cb1f3b7cebd4c60229e4a48372fe586
Reviewed-on: https://go-review.googlesource.com/20888
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Michel Lespinasse <walken@google.com>
See #14874
This change makes the runtime register all compiler generated itabs
(as obtained from the moduledata) during init.
Change-Id: I9969a0985b99b8bda820a631f7fe4c78f1174cdf
Reviewed-on: https://go-review.googlesource.com/20900
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Michel Lespinasse <walken@google.com>
In syscall.forkAndExecInChild, blocks of code labelled Pass 1
and Pass 2 permute the file descriptors (if necessary) which are
passed to the child process. If Pass 1 begins with fds = {0,2,1},
nextfd = 4 and pipe = 4, then the statement labelled "don't stomp
on pipe" is too late -- the pipe (which will be needed to pass
exec status back to the parent) will have been closed by the
preceding DUP call.
Moving the "don't stomp" test earlier ensures that the pipe is
protected.
Fixes#14979
Change-Id: I890c311527f6aa255be48b3277c1e84e2049ee22
Reviewed-on: https://go-review.googlesource.com/21184
Run-TryBot: David du Colombier <0intro@gmail.com>
Reviewed-by: David du Colombier <0intro@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This mostly a mechanical change.
However, the change in assignop (subr.go) is a bug fix.
The code didn’t match the comment,
and the comment was correct.
Nevertheless, this CL passes toolstash -cmp.
The last direct reference to dddBound outside
type.go (in typecheck.go) will go away
in a future CL.
Change-Id: Ifb1691e0a07f906712c18c4a4cd23060807a5da5
Reviewed-on: https://go-review.googlesource.com/21235
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Packed encoding is the default on the proto3 format. Profiles generated
in the profile.proto format by third parties cannot be decoded by the
Go pprof tool, since its proto decoder does not recognize packed
encoding for repeated fields.
In particular this issue prevents go tool pprof from reading profiles
generated by the version of pprof in github.com/google/pprof
Profiles generated by go tool pprof after this change will use packed
repeating fields, so older versions of pprof will not be able to read
them. pprof will continue to be able to read profiles generated before
this change.
Change-Id: Ife0b353a535ae1e495515b9bcec588dd967e171b
Reviewed-on: https://go-review.googlesource.com/21240
Reviewed-by: David Symonds <dsymonds@golang.org>
Run-TryBot: David Symonds <dsymonds@golang.org>
When building make.bash, calling Nodes.Set(s) where len(s) == 0 occurs
4738678 times vs 1465415 calls where len(s) > 0; i.e., it is over 3x
more common to set Nodes.slice to nil rather than to s.
Make a copy of slice (header) and take address of that copy instead
to avoid allocating the argument slice on the heap always even when
not needed.
Saves 4738678 slice header allocations and slice header value copies.
Change-Id: I88e8e919ea9868ceb2df46173d187af4109bd947
Reviewed-on: https://go-review.googlesource.com/21241
Reviewed-by: Alan Donovan <adonovan@google.com>
Now that structs use a slice to store their fields, this code can be
simplified somewhat.
Passes toolstash -cmp.
Change-Id: If17b1c89871fa06f34938fa67df0f8c6bcf1a86b
Reviewed-on: https://go-review.googlesource.com/21219
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This reverts commit 85bbabd9c4.
The reverted CL broke all builds, because it depends on other CLs
that haven't been reviewed or landed yet.
Change-Id: I936f969431e0ac77133e43de2bf63042cef6b777
Reviewed-on: https://go-review.googlesource.com/21238
Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
s390x doesn't introduce any new assembly syntax. There are a few
instructions which require the operands to be reordered, notably
the storage-storage instructions that put the length into From3 so
that the memory operands can be put into From and To.
The assembly test currently covers a subset of instructions but
tries to hit edge cases as much as possible. Unlike the other ports
it can be linked as an executable to make disassembling it easy.
It would be nice to autogenerate it at some point in the future.
Change-Id: I7615ac6ecf239e3f347fad9ae1f8eede91742859
Reviewed-on: https://go-review.googlesource.com/20934
Run-TryBot: Rob Pike <r@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
linux/386 depends on modify_ldt system call, but recent Linux kernels
can disable this system call. Any Go programs built as linux/386
crash with the message 'Trace/breakpoint trap'.
The kernel config CONFIG_MODIFY_LDT_SYSCALL, which control
enable/disable modify_ldt, is disabled on Amazon Linux 2016.03.
This fixes this problem by using set_thread_area instead of modify_ldt
on linux/386.
Fixes#14795.
Change-Id: I0cc5139e40e9e5591945164156a77b6bdff2c7f1
Reviewed-on: https://go-review.googlesource.com/21190
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Minux Ma <minux@golang.org>
One intrinsic was needed to help get the very best
performance out of a future GC; as long as that one was
being added, I also added Bswap since that is sometimes
a handy thing to have. I had intended to fill out the
bit-scan intrinsic family, but the mismatch between the
"scan forward" instruction and "count leading zeroes"
was large enough to cause me to leave it out -- it poses
a dilemma that I'd rather dodge right now.
These intrinsics are not exposed for general use.
That's a separate issue requiring an API proposal change
( https://github.com/golang/proposal )
All intrinsics are tested, both that they are substituted
on the appropriate architecture, and that they produce the
expected result.
Change-Id: I5848037cfd97de4f75bdc33bdd89bba00af4a8ee
Reviewed-on: https://go-review.googlesource.com/20564
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Calling the read only Linkrlookup will now not cause the name
string to escape. So a lookup can be performed on a []byte
casted to a string without allocating. This will help a followup
cl and it is also much simpler and cleaner.
Performance not impacted by this.
name old s/op new s/op delta
LinkCmdGo 0.51 ± 6% 0.51 ± 5% ~ (p=0.192 n=98+98)
Change-Id: I7846ba3160eb845a3a29cbf0be703c47369ece16
Reviewed-on: https://go-review.googlesource.com/21187
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
I want to get rid of OTFUNC, which serves no useful purpose. However,
it turns out that the escape analysis pass looks at the node slices set
up for OTFUNC, even though by the time escape analysis runs the OTFUNC
has been converted to OTYPE. This CL converts the escape analysis code
to look at the function decls instead, and clears the OTFUNC info when
converting to OTYPE to ensure that nothing else looks at it.
Change-Id: I3f2f5997ea8ea7a127a858e94b20aabfab84a5bf
Reviewed-on: https://go-review.googlesource.com/21202
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Remove all special handling of Google Code, which has shut down.
Commit 4ec2fd3e6a suggested that maybe the
shutdown warning should remain. However, it has been missing from Go 1.6
already, and by Go 1.7 people will most likely have realised that Google
Code has shut down.
Updates #10193.
Change-Id: I5749bbbe2fe3b07cff4edd20303bbedaeaa8d77b
Reviewed-on: https://go-review.googlesource.com/21189
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Make verbs b,c,o and U work for any array and slice of integer
type including byte and uint8.
Fix a bug that triggers badverb for []uint8 and []byte type
on the slice/array level instead of on each element like for
any other slice or array type.
Add tests that make sure we do not accidentally alter the
behavior of printing []byte for []byte and []uint8 type
if they are used at the top level when formatting with %#v.
name old time/op new time/op delta
SprintfHexBytes-2 177ns ± 2% 176ns ± 2% ~ (p=0.066 n=48+49)
SprintfBytes-2 330ns ± 1% 329ns ± 1% ~ (p=0.118 n=45+47)
Fixes#13478
Change-Id: I99328a184973ae219bcc0f69c3978cb1ff462888
Reviewed-on: https://go-review.googlesource.com/20686
Run-TryBot: Rob Pike <r@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Merge printReflectValue into printValue. Determine if handleMethods
was already called in printArg by checking if depth is 0. Do not
call handleMethods on depth 0 again in printValue to not introduce
a performance regression. handleMethods is called already in printArg
to not introduce a performance penalty for top-level Stringer,
GoStringer, Errors and Formatters by using reflect.ValueOf on them
just to retrieve them again as interface{} values in printValue.
Clear p.arg in printValue after handleMethods to print the type
of the value inside the reflect.Value when a bad verb is encountered
on the top level instead of printing "reflect.Value=" as the type of
the argument. This also fixes a bug that incorrectly prints the
whole map instead of just the value for a key if the returned value
by the map for the key is an invalid reflect value.
name old time/op new time/op delta
SprintfPadding-2 229ns ± 2% 227ns ± 1% -0.50% (p=0.013 n=20+20)
SprintfEmpty-2 36.4ns ± 6% 37.2ns ±14% ~ (p=0.091 n=18+20)
SprintfString-2 102ns ± 1% 102ns ± 0% ~ (p=0.751 n=20+20)
SprintfTruncateString-2 142ns ± 0% 141ns ± 1% -0.95% (p=0.000 n=16+20)
SprintfQuoteString-2 389ns ± 0% 388ns ± 0% -0.12% (p=0.019 n=20+20)
SprintfInt-2 100ns ± 2% 100ns ± 1% ~ (p=0.188 n=20+15)
SprintfIntInt-2 155ns ± 3% 154ns ± 2% ~ (p=0.092 n=20+20)
SprintfPrefixedInt-2 250ns ± 2% 251ns ± 3% ~ (p=0.559 n=20+20)
SprintfFloat-2 177ns ± 2% 175ns ± 1% -1.30% (p=0.000 n=20+20)
SprintfComplex-2 516ns ± 1% 510ns ± 1% -1.13% (p=0.000 n=19+16)
SprintfBoolean-2 90.9ns ± 3% 90.6ns ± 1% ~ (p=0.193 n=19+19)
SprintfHexString-2 171ns ± 1% 169ns ± 1% -1.44% (p=0.000 n=19+20)
SprintfHexBytes-2 180ns ± 1% 180ns ± 1% ~ (p=0.060 n=19+18)
SprintfBytes-2 330ns ± 1% 329ns ± 1% -0.42% (p=0.003 n=20+20)
SprintfStringer-2 354ns ± 3% 352ns ± 3% ~ (p=0.525 n=20+19)
SprintfStructure-2 804ns ± 3% 776ns ± 2% -3.56% (p=0.000 n=20+20)
FprintInt-2 155ns ± 0% 151ns ± 1% -2.35% (p=0.000 n=19+20)
FprintfBytes-2 169ns ± 0% 170ns ± 1% +0.81% (p=0.000 n=18+19)
FprintIntNoAlloc-2 112ns ± 0% 109ns ± 1% -2.28% (p=0.000 n=20+20)
Change-Id: Ib9a39082ed1be0f1f7499ee6fb6c9530f043e43a
Reviewed-on: https://go-review.googlesource.com/20923
Run-TryBot: Rob Pike <r@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Remove format flag reset from doPrint. Flags will not be set in
doPrint and printArg will not return with flags modified.
Remove the extra arguments addspace and addnewline and split up
doPrint into two simpler and specialized functions.
Change-Id: Ib884d027abfbb31c6f01b008f51d6d76fc0c1a17
Reviewed-on: https://go-review.googlesource.com/21181
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Use a type switch instead of calling Val.Ctype (which in turn just
uses a type switch anyway).
Use continue statements to simplify the control flow.
Change-Id: I65c139d706d4d78e5b4ce09d1b1505a3e424496b
Reviewed-on: https://go-review.googlesource.com/21173
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The colas function allocates 2 slice headers in each call (via Nodes.Set)
only to throw away those slice headers in the common case where both the
lhs and rhs in "lhs := rhs" have length 1.
Avoid the Nodes.Set calls in those cases. For make.bash, this eliminates
~63,000 slice header allocations.
Also: Minor cleanups in colasdefn.
Change-Id: Ib114a67c3adeb8821868bd71a5e0f5e2e19fcd4f
Reviewed-on: https://go-review.googlesource.com/21170
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
For #14876.
Change-Id: I0992859264cbaf9c9b691fad53345bbb01b4cf3b
Reviewed-on: https://go-review.googlesource.com/21085
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
For #14876.
Change-Id: I33947f74e8058437a784862f1f064974afc99250
Reviewed-on: https://go-review.googlesource.com/21084
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
- Fix a typo.
- Skip this test on -short on non-builders.
Change-Id: Id102eceb59451694bf92b618e02ccee6603b6852
Reviewed-on: https://go-review.googlesource.com/21113
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
High tag number form may not be used for tag numbers that fit in low tag number
form.
Change-Id: I93edde0e1f86087047e0b3f2e55d6180b01e78bf
Reviewed-on: https://go-review.googlesource.com/18224
Reviewed-by: Adam Langley <agl@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
For #14962.
Change-Id: I3539d882487c99dee99ac953e039b79c6b963cf9
Reviewed-on: https://go-review.googlesource.com/21150
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fixes#14944
Change-Id: I73e0997cb6ebaeced1045b0ddadac893319bd78f
Reviewed-on: https://go-review.googlesource.com/21065
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
I recently added TestUnexportedMethods which uses an interface type
to pin type information for an unexported method. But as written,
the interface type is not accessible to the reflect package.
You can imagine a future compiler optimization realizing that and
removing the type information for f. In fact, cl/20901 happens to
do that.
Change-Id: I1ddb67f50cb9b5737253b58f10545f3de652c29d
Reviewed-on: https://go-review.googlesource.com/21112
Reviewed-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is a follow-up of https://go-review.googlesource.com/#/c/20653/
Special case computation for slices with elements of byte size or
pointer size.
name old time/op new time/op delta
GrowSliceBytes-4 86.2ns ± 3% 75.4ns ± 2% -12.50% (p=0.000 n=20+20)
GrowSliceInts-4 161ns ± 3% 136ns ± 3% -15.59% (p=0.000 n=19+19)
GrowSlicePtr-4 239ns ± 2% 233ns ± 2% -2.52% (p=0.000 n=20+20)
GrowSliceStruct24Bytes-4 258ns ± 3% 256ns ± 3% ~ (p=0.134 n=20+20)
Change-Id: Ice5fa648058fe9d7fa89dee97ca359966f671128
Reviewed-on: https://go-review.googlesource.com/21101
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When creating binaries for dynamic linking, the linker moves
read-only data symbols that contain pointers into relro sections.
It is not setup for handling a go.string symbol moving to relro.
Instead of teaching it how (because go.string symbols with pointers
are unusual anyhow), put the data in a type.. section.
Fixes the android builder.
Change-Id: Ica4722d32241643c060923517b90276ff8ac6b07
Reviewed-on: https://go-review.googlesource.com/21110
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
There's a race between runtime.goexitsall killing all OS processes
of a go program in order to exit, and runtime.newosproc forking a
new one. If the new process has been created but not yet stored
its pid in m.procid, it will not be killed by goexitsall and
deadlock results.
This CL prevents the race by making the newly forked process
check whether the program is exiting. It also prevents a
potential "shoot-out" if multiple goroutines call Exit at
the same time, which could possibly lead to two processes
killing each other and leaving the rest deadlocked.
Change-Id: I3170b4a62d2461f6b029b3d6aad70373714ed53e
Reviewed-on: https://go-review.googlesource.com/21135
Run-TryBot: David du Colombier <0intro@gmail.com>
Reviewed-by: Marvin Stenger <marvin.stenger94@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David du Colombier <0intro@gmail.com>
During random stealing we steal 4*GOMAXPROCS times from random procs.
One would expect that most of the time we check all procs this way,
but due to low quality PRNG we actually miss procs with frightening
probability. Below are modelling experiment results for 1e6 tries:
GOMAXPROCS = 2 : missed 1 procs 7944 times
GOMAXPROCS = 3 : missed 1 procs 101620 times
GOMAXPROCS = 3 : missed 2 procs 3571 times
GOMAXPROCS = 4 : missed 1 procs 63916 times
GOMAXPROCS = 4 : missed 2 procs 61 times
GOMAXPROCS = 4 : missed 3 procs 16 times
GOMAXPROCS = 5 : missed 1 procs 133136 times
GOMAXPROCS = 5 : missed 2 procs 1025 times
GOMAXPROCS = 5 : missed 3 procs 101 times
GOMAXPROCS = 5 : missed 4 procs 15 times
GOMAXPROCS = 8 : missed 1 procs 151765 times
GOMAXPROCS = 8 : missed 2 procs 5057 times
GOMAXPROCS = 8 : missed 3 procs 1726 times
GOMAXPROCS = 8 : missed 4 procs 68 times
GOMAXPROCS = 12 : missed 1 procs 199081 times
GOMAXPROCS = 12 : missed 2 procs 27489 times
GOMAXPROCS = 12 : missed 3 procs 3113 times
GOMAXPROCS = 12 : missed 4 procs 233 times
GOMAXPROCS = 12 : missed 5 procs 9 times
GOMAXPROCS = 16 : missed 1 procs 237477 times
GOMAXPROCS = 16 : missed 2 procs 30037 times
GOMAXPROCS = 16 : missed 3 procs 9466 times
GOMAXPROCS = 16 : missed 4 procs 1334 times
GOMAXPROCS = 16 : missed 5 procs 192 times
GOMAXPROCS = 16 : missed 6 procs 5 times
GOMAXPROCS = 16 : missed 7 procs 1 times
GOMAXPROCS = 16 : missed 8 procs 1 times
A missed proc won't lead to underutilization because we check all procs
again after dropping P. But it can lead to an unpleasant situation
when we miss a proc, drop P, check all procs, discover work, acquire P,
miss the proc again, repeat.
Improve stealing logic to cover all procs.
Also don't enter spinning mode and try to steal when there is nobody around.
Change-Id: Ibb6b122cc7fb836991bad7d0639b77c807aab4c2
Reviewed-on: https://go-review.googlesource.com/20836
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Marvin Stenger <marvin.stenger94@gmail.com>
Change control flow to probe with N=1. This calls benchFunc
the same number of times as the old implementation in the
absence of subbenchmarks.
To be compatible with existing tools, benchmarking only
prints a line for "leaf" benchmarks. This means, though, that
the name of a benchmark can only be printed after the first
iteration.
Issue #14863
Change-Id: Ic7b9b89b058f8ebb5287755f24f9e47df8c9537c
Reviewed-on: https://go-review.googlesource.com/21043
Run-TryBot: Marcel van Lohuizen <mpvl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This change removes a lot of dead code. Some of the code has never been
used, not even when it was first commited. The rest shouldn't have
survived refactors.
This change doesn't remove unused routines helpful for debugging, nor
does it remove code that's used in commented out blocks of code that are
only unused temporarily. Furthermore, unused constants weren't removed
when they were part of a set of constants from specifications.
One noteworthy omission from this CL are about 1000 lines of unused code
in cmd/fix, 700 lines of which are the typechecker, which hasn't been
used ever since the pre-Go 1 fixes have been removed. I wasn't sure if
this code should stick around for future uses of cmd/fix or be culled as
well.
Change-Id: Ib714bc7e487edc11ad23ba1c3222d1fd02e4a549
Reviewed-on: https://go-review.googlesource.com/20926
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Store already padded keys instead of storing key and padding it during
Reset and Sum. This simplifies code and makes Reset-Write-Sum sequences
faster, which helps /x/crypto/pbkdf2.
HMAC benchmark:
benchmark old ns/op new ns/op delta
BenchmarkHMACSHA256_1K-4 7669 7613 -0.73%
BenchmarkHMACSHA256_32-4 1880 1737 -7.61%
benchmark old MB/s new MB/s speedup
BenchmarkHMACSHA256_1K-4 133.52 134.50 1.01x
BenchmarkHMACSHA256_32-4 17.02 18.41 1.08x
PBKDF2 benchmark:
benchmark old ns/op new ns/op delta
BenchmarkPBKDF2HMACSHA256-4 1943196 1807699 -6.97%
Change-Id: I6697028370c226715ab477b0844951a83eb3488c
Reviewed-on: https://go-review.googlesource.com/21024
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
The Lookup method provides a way to extract a tag value, while
determining whether the tag key exists in the struct field's tag.
Fixes#14883
Change-Id: I7460cb68f0ca1aaa025935050b9e182efcb64db3
Reviewed-on: https://go-review.googlesource.com/20864
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Ther darwin/arm{,64} exec wrapper now limits the number of concurrent
executions to 1, so remove the higher level parallel task limit from
the Go command.
Change-Id: Id84f65c3908305bde0452b3c8db6df8c5a8881bb
Reviewed-on: https://go-review.googlesource.com/21100
Reviewed-by: David Crawshaw <crawshaw@golang.org>
I failed to rebase (and re-test) CL 21102 before submit, which meant
that two extra tests sneaked into testcarchive that still referenced
runtime.GOOS and runtime.GOARCH.
Convert the new tests.
While we're here, make sure pending tasks are flushed before running
the host tests. If not, the "##### misc/cgo/testcarchive" banner
and "PASS" won't show up in the all.bash output.
Change-Id: I41fc4ec9515f9a193fa052f7c31fac452153c897
Reviewed-on: https://go-review.googlesource.com/21106
Run-TryBot: Elias Naur <elias.naur@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Create a byte encoding designed for static Go names.
It is intended to be a compact representation of a name
and optional tag data that can be turned into a Go string
without allocating, and describes whether or not it is
exported without unicode table.
The encoding is described in reflect/type.go:
// The first byte is a bit field containing:
//
// 1<<0 the name is exported
// 1<<1 tag data follows the name
// 1<<2 pkgPath *string follow the name and tag
//
// The next two bytes are the data length:
//
// l := uint16(data[1])<<8 | uint16(data[2])
//
// Bytes [3:3+l] are the string data.
//
// If tag data follows then bytes 3+l and 3+l+1 are the tag length,
// with the data following.
//
// If the import path follows, then ptrSize bytes at the end of
// the data form a *string. The import path is only set for concrete
// methods that are defined in a different package than their type.
Shrinks binary sizes:
cmd/go: 164KB (1.6%)
jujud: 1.0MB (1.5%)
For #6853.
Change-Id: I46b6591015b17936a443c9efb5009de8dfe8b609
Reviewed-on: https://go-review.googlesource.com/20968
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The c-archive test were recently converted from shell script to Go.
Unfortunately, it also lost the ability to target iOS and Android
that lack C compilers and require exec wrappers.
Compile the c-archive test for the host and run it with the target
GOOS/GOARCH environment. Change the test to rely on go env GOOS
and go env GOARCH instead of runtime.GOOS and runtime.GOARCH.
Fixes#8345
Change-Id: I290ace2f7e96b87c55d99492feb7d660140dcb32
Reviewed-on: https://go-review.googlesource.com/21102
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In f the extra & 63 is redundant because SHRQ already
looks at the bottom 6 bits only. This is a trick on AMD64
to get rid of CMPQ/SBBQ/ANDQ if one knows that the shift
counter is small.
func f(x uint64, s uint) uint64 {
return x >> (s & 63)
}
Change-Id: I4861c902168dabec9a6a14a85750246dde94fc08
Reviewed-on: https://go-review.googlesource.com/21073
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
g used to produce CMPQ/SBBQ/ANDQ, but f didn't even though
s&15 is at most s&63.
func f(x uint64, s uint) uint64 {
return x >> (s & 63)
}
func g(x uint64, s uint) uint64 {
return x >> (s & 15)
}
Change-Id: Iab4a1a6e10b471dead9f1203e9d894677cf07bb2
Reviewed-on: https://go-review.googlesource.com/21048
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The current runtime attempts to forward signals generated by non-Go
code to the original signal handler. If it can't call the original
handler directly, it currently attempts to re-raise the signal after
resetting the handler. In this case, the original context is lost.
This fix prevents that problem by simply returning from the go signal
handler after resetting the original handler. It only does this when
the original handler is the system default handler, which in all cases
is known to not recover. The signal is not reset, so it is retriggered
and the original handler takes over with the proper context.
Fixes#14899
Change-Id: Ib1c19dfa4b50d9732d7a453de3784c8141e1cbb3
Reviewed-on: https://go-review.googlesource.com/21006
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Android doesn't (generally) have /bin/sh.
Change-Id: I343817c342e3473d09c85155761682b5ddb043e4
Reviewed-on: https://go-review.googlesource.com/21075
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes#14938.
Additionally some simplifications along the way.
Change-Id: I2c5fb7e32dcc6fab68fff36a49cb72e715756abe
Reviewed-on: https://go-review.googlesource.com/21046
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
CL 20892 converted the misc/cgo/testcarchive test to Go.
Unfortunately, dist does not (yet) support tests running off the host
so the testcarchive is disabled for now.
For #14318
Change-Id: Iab3d0a7b5309187a603b48f22a7fa736f089f89d
Reviewed-on: https://go-review.googlesource.com/21070
Reviewed-by: David Crawshaw <crawshaw@golang.org>
For darwin/arm{,64} a non-Go thread is created to convert
EXC_BAD_ACCESS to panics. However, the Go signal handler refuse to
handle signals that would otherwise be ignored if they arrive at
non-Go threads.
Block all (posix) signals to that thread, making sure that
no unexpected signals arrive to it. At least one test, TestStop in
os/signal, depends on signals not arriving on any non-Go threads.
For #14318
Change-Id: I901467fb53bdadb0d03b0f1a537116c7f4754423
Reviewed-on: https://go-review.googlesource.com/21047
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Some minor scoping cleanups found by a very old version of grind.
Change-Id: I1d373817586445fc87e38305929097b652696fdd
Reviewed-on: https://go-review.googlesource.com/21064
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Ignore superfluous trailing IDAT chunks which were not consumed when decoding
the image. This change fixes decoding of valid images in which a zero-length
IDAT chunk appears after the actual image data. It also prevents decoding of
trailing garbage IDAT chunks or maliciously embedded additional images.
Fixes#14936
Change-Id: I8c76cfa9a03496d9576f72bed2db109271f97c5e
Reviewed-on: https://go-review.googlesource.com/21045
Reviewed-by: Nigel Tao <nigeltao@golang.org>
If name is /dev/{stdin,stdout,stderr}, return fileInfo.
Fixes#14853.
Change-Id: Ibf7d1ae7b9f3dc43f6ed7c905ea2c5102e1971cc
Reviewed-on: https://go-review.googlesource.com/20845
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
This commit replaces some of
for i := len(x) - 1; i >= 0; i-- {...}
style loops, which do not rely on reverse iteration order.
Change-Id: I5542834286562da058200c06e7a173b13760e54d
Reviewed-on: https://go-review.googlesource.com/21044
Reviewed-by: Keith Randall <khr@golang.org>
Get rid of (*Mpint).Add's "quiet" parameter: it's always set to 0.
Inline (*Mpint).shift into (*Mpint).Lsh and (*Mpint).Rsh. There's no
need for a common shift method that can handle both left or right
shifts based on sign when the higher level abstractions only ever do
one or the other.
Change-Id: Icd3b082413f9193961b6835279e0bd4b6a6a6621
Reviewed-on: https://go-review.googlesource.com/21050
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Start working on arm port. Gets close to correct
code for fibonacci:
func fib(n int) int {
if n < 2 {
return n
}
return fib(n-1) + fib(n-2)
}
Still a lot to do, but this is a good starting point.
Cleaned up some arch-specific dependencies in regalloc.
Change-Id: I4301c6c31a8402168e50dcfee8bcf7aee73ea9d5
Reviewed-on: https://go-review.googlesource.com/21000
Reviewed-by: David Chase <drchase@google.com>
Remove reflect type information for unexported methods that do not
satisfy any interface in the program.
Ideally the unexported method would not appear in the method list at
all, but that is tricky because the slice is built by the compiler.
Reduces binary size:
cmd/go: 81KB (0.8%)
jujud: 258KB (0.4%)
For #6853.
Change-Id: I25ef8df6907e9ac03b18689d584ea46e7d773043
Reviewed-on: https://go-review.googlesource.com/21033
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
khr: Lifting the nil check out of the loop altogether is an admirable
goal, and this rewrite is one step on the way. But without lifting it
out of the loop, the rewrite is just hurting us.
Fixes#14917
Change-Id: Idb917f37d89f50f8e046d5ebd7c092b1e0eb0633
Reviewed-on: https://go-review.googlesource.com/21040
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The existing implementation for Equal and similar
functions in the bytes package operate on one byte at
at time. This performs poorly on ppc64/ppc64le especially
when the byte buffers are large. This change improves
those functions by loading and comparing double words where
possible. The common code has been moved to a function
that can be shared by the other functions in this
file which perform the same type of comparison.
Further optimizations are done for the case where
>= 32 bytes are being compared. The new function
memeqbody is used by memeq_varlen, Equal, and eqstring.
When running the bytes test with -test.bench=Equal
benchmark old MB/s new MB/s speedup
BenchmarkEqual1 164.83 129.49 0.79x
BenchmarkEqual6 563.51 445.47 0.79x
BenchmarkEqual9 656.15 1099.00 1.67x
BenchmarkEqual15 591.93 1024.30 1.73x
BenchmarkEqual16 613.25 1914.12 3.12x
BenchmarkEqual20 682.37 1687.04 2.47x
BenchmarkEqual32 807.96 3843.29 4.76x
BenchmarkEqual4K 1076.25 23280.51 21.63x
BenchmarkEqual4M 1079.30 13120.14 12.16x
BenchmarkEqual64M 1073.28 10876.92 10.13x
It was determined that the degradation in the smaller byte tests
were due to unfavorable code alignment of the single byte loop.
Fixes#14368
Change-Id: I0dd87382c28887c70f4fbe80877a8ba03c31d7cd
Reviewed-on: https://go-review.googlesource.com/20249
Reviewed-by: Minux Ma <minux@golang.org>
This changes how matching is done in deflate algorithm.
The major change is that we do not look for matches that are only
3 bytes in length, matches must be 4 bytes at least.
Contrary to what you would expect this actually improves the
compresion ratio, since 3 literal bytes will often be shorter
than a match after huffman encoding.
This varies a bit by source, but is most often the case when the
source is "easy" to compress.
Second of all, a "stronger" hash is used. The hash is similar to
the hashing function used by Snappy.
Overall, the speed impact is biggest on higher compression levels.
I intend to replace the "speed" compression level, which can be
seen in CL 21021.
The built-in benchmark using "digits" is slower at level 1.
I see this as an exception, since "digits" is a special type
of data, where you have low entropy (numbers 0->9), but no
significant matches. Again, CL 20021 fixes that case.
NewWriterDict is also made considerably faster, by not running data
through the entire encoder. This is not reflected by the benchmark.
Overall, the speed impact is biggest on higher compression levels.
I intend to replace the "speed" compression level.
COMPARED to tip/master:
name old time/op new time/op delta
EncodeDigitsSpeed1e4-4 401µs ± 1% 345µs ± 2% -13.95%
EncodeDigitsSpeed1e5-4 3.19ms ± 1% 4.27ms ± 3% +33.96%
EncodeDigitsSpeed1e6-4 27.7ms ± 4% 43.8ms ± 3% +58.00%
EncodeDigitsDefault1e4-4 641µs ± 0% 403µs ± 1% -37.15%
EncodeDigitsDefault1e5-4 13.8ms ± 1% 6.4ms ± 3% -53.73%
EncodeDigitsDefault1e6-4 162ms ± 1% 64ms ± 2% -60.51%
EncodeDigitsCompress1e4-4 627µs ± 1% 405µs ± 2% -35.45%
EncodeDigitsCompress1e5-4 13.9ms ± 0% 6.3ms ± 2% -54.46%
EncodeDigitsCompress1e6-4 159ms ± 1% 64ms ± 0% -59.91%
EncodeTwainSpeed1e4-4 433µs ± 4% 331µs ± 1% -23.53%
EncodeTwainSpeed1e5-4 2.82ms ± 1% 3.08ms ± 0% +9.10%
EncodeTwainSpeed1e6-4 28.1ms ± 2% 28.8ms ± 0% +2.82%
EncodeTwainDefault1e4-4 695µs ± 4% 474µs ± 1% -31.78%
EncodeTwainDefault1e5-4 11.8ms ± 0% 7.4ms ± 0% -37.31%
EncodeTwainDefault1e6-4 128ms ± 0% 75ms ± 0% -40.93%
EncodeTwainCompress1e4-4 719µs ± 3% 480µs ± 0% -33.27%
EncodeTwainCompress1e5-4 15.0ms ± 3% 8.2ms ± 2% -45.55%
EncodeTwainCompress1e6-4 170ms ± 0% 85ms ± 1% -49.99%
name old speed new speed delta
EncodeDigitsSpeed1e4-4 25.0MB/s ± 1% 29.0MB/s ± 2% +16.24%
EncodeDigitsSpeed1e5-4 31.4MB/s ± 1% 23.4MB/s ± 3% -25.34%
EncodeDigitsSpeed1e6-4 36.1MB/s ± 4% 22.8MB/s ± 3% -36.74%
EncodeDigitsDefault1e4-4 15.6MB/s ± 0% 24.8MB/s ± 1% +59.11%
EncodeDigitsDefault1e5-4 7.27MB/s ± 1% 15.72MB/s ± 3% +116.23%
EncodeDigitsDefault1e6-4 6.16MB/s ± 0% 15.60MB/s ± 2% +153.25%
EncodeDigitsCompress1e4-4 15.9MB/s ± 1% 24.7MB/s ± 2% +54.97%
EncodeDigitsCompress1e5-4 7.19MB/s ± 0% 15.78MB/s ± 2% +119.62%
EncodeDigitsCompress1e6-4 6.27MB/s ± 1% 15.65MB/s ± 0% +149.52%
EncodeTwainSpeed1e4-4 23.1MB/s ± 4% 30.2MB/s ± 1% +30.68%
EncodeTwainSpeed1e5-4 35.4MB/s ± 1% 32.5MB/s ± 0% -8.34%
EncodeTwainSpeed1e6-4 35.6MB/s ± 2% 34.7MB/s ± 0% -2.77%
EncodeTwainDefault1e4-4 14.4MB/s ± 4% 21.1MB/s ± 1% +46.48%
EncodeTwainDefault1e5-4 8.49MB/s ± 0% 13.55MB/s ± 0% +59.50%
EncodeTwainDefault1e6-4 7.83MB/s ± 0% 13.25MB/s ± 0% +69.19%
EncodeTwainCompress1e4-4 13.9MB/s ± 3% 20.8MB/s ± 0% +49.83%
EncodeTwainCompress1e5-4 6.65MB/s ± 3% 12.20MB/s ± 2% +83.51%
EncodeTwainCompress1e6-4 5.88MB/s ± 0% 11.76MB/s ± 1% +100.06%
Change-Id: I724e33c1dd3e3a6a1b0a68e094baa959352baf32
Reviewed-on: https://go-review.googlesource.com/20929
Run-TryBot: Nigel Tao <nigeltao@golang.org>
Reviewed-by: Nigel Tao <nigeltao@golang.org>
The exclusion of string from IsScanValue prevents driver authors from
writing their drivers in such a way that would allow users to
distinguish between strings and byte arrays returned from a database.
Such drivers are possible today, but require their authors to deviate
from the guidance provided by the standard library.
This exclusion has been in place since the birth of this package in
https://github.com/golang/go/commit/357f2cb1a385f4d1418e48856f9abe0cce,
but the fakedb implementation shipped in the same commit violates the
exclusion!
Strictly speaking this is a breaking change, but it increases the set
of permissible Scan types, and should not cause breakage in practice.
No test changes are necessary because fakedb already exercises this.
Fixes#6497.
Change-Id: I69dbd3a59d90464bcae8c852d7ec6c97bfd120f8
Reviewed-on: https://go-review.googlesource.com/19439
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This is to support https://golang.org/cl/18057, which is going to add
Windows support to this directory. Better to write the test in Go then
to have both test.bash and test.bat.
Update #13494.
Change-Id: I4af7004416309e885049ee60b9470926282f210d
Reviewed-on: https://go-review.googlesource.com/20892
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
No need to have both ops when they do the same thing.
Just declare MOVBload to zero extend and we can get rid
of MOVBQZXload. Same for W and L.
Kind of a followon cleanup for https://go-review.googlesource.com/c/19506/
Should enable an easier fix for #14920
Change-Id: I7cfac909a8ba387f433a6ae75c050740ebb34d42
Reviewed-on: https://go-review.googlesource.com/21004
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This makes the rounding bug fix in math/big for issue 14651 available
to the compiler.
- changes to cmd/compile/internal/big fully automatic via script
- added test case for issue
- updated old test case with correct test data
Fixes#14651.
Change-Id: Iea37a2cd8d3a75f8c96193748b66156a987bbe40
Reviewed-on: https://go-review.googlesource.com/20818
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Shows up occassionally, especially after p = p[:8:len(p)]
Updates #14905
Change-Id: Iab35ef2eac57817e6a10c6aaeeb84709e8021641
Reviewed-on: https://go-review.googlesource.com/21025
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The matcher is responsible for sanitizing and uniquing the
test and benchmark names and thus needs to be included before the
API can be exposed.
Matching currently uses the regexp to only match the top-level
tests/benchmarks.
Support for subtest matching is for another CL.
Change-Id: I7c8464068faef7ebc179b03a7fe3d01122cc4f0b
Reviewed-on: https://go-review.googlesource.com/18897
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Marcel van Lohuizen <mpvl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Escape analysis has a hard time with tree-like
structures (see #13493 and #14858).
This is unlikely to change.
As a result, when invoking a function that accepts
a **Node parameter, we usually allocate a *Node
on the heap. This happens a whole lot.
This CL changes functions from taking a **Node
to acting more like append: It both modifies
the input and returns a replacement for it.
Because of the cascading nature of escape analysis,
in order to get the benefits, I had to modify
almost all such functions. The remaining functions
are in racewalk and the backend. I would be happy
to update them as well in a separate CL.
This CL was created by manually updating the
function signatures and the directly impacted
bits of code. The callsites were then automatically
updated using a bespoke script:
https://gist.github.com/josharian/046b1be7aceae244de39
For ease of reviewing and future understanding,
this CL is also broken down into four CLs,
mailed separately, which show the manual
and the automated changes separately.
They are CLs 20990, 20991, 20992, and 20993.
Passes toolstash -cmp.
name old time/op new time/op delta
Template 335ms ± 5% 324ms ± 5% -3.35% (p=0.000 n=23+24)
Unicode 176ms ± 9% 165ms ± 6% -6.12% (p=0.000 n=23+24)
GoTypes 1.10s ± 4% 1.07s ± 2% -2.77% (p=0.000 n=24+24)
Compiler 5.31s ± 3% 5.15s ± 3% -2.95% (p=0.000 n=24+24)
MakeBash 41.6s ± 1% 41.7s ± 2% ~ (p=0.586 n=23+23)
name old alloc/op new alloc/op delta
Template 63.3MB ± 0% 62.4MB ± 0% -1.36% (p=0.000 n=25+23)
Unicode 42.4MB ± 0% 41.6MB ± 0% -1.99% (p=0.000 n=24+25)
GoTypes 220MB ± 0% 217MB ± 0% -1.11% (p=0.000 n=25+25)
Compiler 994MB ± 0% 973MB ± 0% -2.08% (p=0.000 n=24+25)
name old allocs/op new allocs/op delta
Template 681k ± 0% 574k ± 0% -15.71% (p=0.000 n=24+25)
Unicode 518k ± 0% 413k ± 0% -20.34% (p=0.000 n=25+24)
GoTypes 2.08M ± 0% 1.78M ± 0% -14.62% (p=0.000 n=25+25)
Compiler 9.26M ± 0% 7.64M ± 0% -17.48% (p=0.000 n=25+25)
name old text-bytes new text-bytes delta
HelloSize 578k ± 0% 578k ± 0% ~ (all samples are equal)
CmdGoSize 6.46M ± 0% 6.46M ± 0% ~ (all samples are equal)
name old data-bytes new data-bytes delta
HelloSize 128k ± 0% 128k ± 0% ~ (all samples are equal)
CmdGoSize 281k ± 0% 281k ± 0% ~ (all samples are equal)
name old exe-bytes new exe-bytes delta
HelloSize 921k ± 0% 921k ± 0% ~ (all samples are equal)
CmdGoSize 9.86M ± 0% 9.86M ± 0% ~ (all samples are equal)
Change-Id: I277d95bd56d51c166ef7f560647aeaa092f3f475
Reviewed-on: https://go-review.googlesource.com/20959
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
These new methods help find the compilation unit to pass to the
LineReader method in order to find the line information for a PC.
The Ranges method also helps identify the specific function for a PC,
needed to determine the function name.
This uses the .debug.ranges section if necessary, and changes the object
file format packages to pass in the section contents if available.
Change-Id: I5ebc3d27faaf1a126ffb17a1e6027efdf64af836
Reviewed-on: https://go-review.googlesource.com/20769
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Adds a new R_PCRELDBL relocation for 2-byte aligned relative
relocations on s390x. Should be removed once #14218 is
implemented.
Change-Id: I79dd2d8e746ba8cbc26c570faccfdd691e8161e8
Reviewed-on: https://go-review.googlesource.com/20941
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Should let the s390x builder progress a little further.
Change-Id: I5eab5f384b0b039f8e246ba69ecfb24de08625d2
Reviewed-on: https://go-review.googlesource.com/20965
Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Allow names to be used for subexpressions of match rules.
For example:
(OpA x:(OpB y)) -> ..use x here to refer to the OpB value..
This gets rid of the .Args[0].Args[0]... way of naming we
used to use.
While we're here, give all subexpression matches names instead
of recomputing them with .Args[i] sequences each time they
are referenced. Makes the generated rule code a bit smaller.
Change-Id: Ie42139f6f208933b75bd2ae8bd34e95419bc0e4e
Reviewed-on: https://go-review.googlesource.com/20997
Run-TryBot: Todd Neal <todd@tneal.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Todd Neal <todd@tneal.org>
Don't write back parts of a slicing operation if they
are unchanged from the source of the slice. For example:
x.s = x.s[0:5] // don't write back pointer or cap
x.s = x.s[:5] // don't write back pointer or cap
x.s = x.s[:5:7] // don't write back pointer
There is more to be done here, for example:
x.s = x.s[:len(x.s):7] // don't write back ptr or len
This CL can't handle that one yet.
Fixes#14855
Change-Id: Id1e1a4fa7f3076dc1a76924a7f1cd791b81909bb
Reviewed-on: https://go-review.googlesource.com/20954
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
For the following example, but there are a few more in the stdlib:
func histogram(b []byte, h *[256]int32) {
for _, t := range b {
h[t]++
}
}
Change-Id: I56615f341ae52e02ef34025588dc6d1c52122295
Reviewed-on: https://go-review.googlesource.com/20924
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Allow inlining of functions with switch statements as long as they don't
contain a break or type switch.
Fixes#13071
Change-Id: I057be351ea4584def1a744ee87eafa5df47a7f6d
Reviewed-on: https://go-review.googlesource.com/20824
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Converting a big.Float value x to a float32/64 value did not correctly
round x up to the smallest denormal float32/64 if x was smaller than the
smallest denormal float32/64, but larger than 0.5 of a smallest denormal
float32/64.
Handle this case explicitly and simplify some code in the turn.
For #14651.
Change-Id: I025e24bf8f0e671581a7de0abf7c1cd7e6403a6c
Reviewed-on: https://go-review.googlesource.com/20816
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alan Donovan <adonovan@google.com>
The inserted early bound checks cause the slice
to expand beyond the original length of the slice.
Change-Id: Ib38891605f4a9a12d3b9e2071a5f77640b083d2d
Reviewed-on: https://go-review.googlesource.com/20981
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
MOVSB is quite a bit faster for unaligned moves.
Possibly we should use MOVSB all of the time, but Intel folks
say it might be a bit faster to use MOVSQ on some processors
(but not any I have access to at the moment).
benchmark old ns/op new ns/op delta
BenchmarkMemmove4096-8 93.9 93.2 -0.75%
BenchmarkMemmoveUnalignedDst4096-8 256 151 -41.02%
BenchmarkMemmoveUnalignedSrc4096-8 175 90.5 -48.29%
Fixes#14630
Change-Id: I568e6d6590eb3615e6a699fb474020596be665ff
Reviewed-on: https://go-review.googlesource.com/20293
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Left over from CL 20931.
Change-Id: I3b8dd9ef748bcbf70b5118da28135aaa1e5ba3a8
Reviewed-on: https://go-review.googlesource.com/20955
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Minux Ma <minux@golang.org>
Constant comparisons against 0 are reasonably common.
Special-case and avoid allocating a new zero value each time.
Change-Id: I6c526c8ab30ef7f0fef59110133c764b7b90ba05
Reviewed-on: https://go-review.googlesource.com/20956
Reviewed-by: Alan Donovan <adonovan@google.com>
Also give them more idiomatic Go names. Adding godocs is outside the
scope of this CL. (Besides, the method names almost all directly
parallel an underlying math/big.Int or math/big.Float method.)
CL prepared mechanically with sed (for rewriting mpint.go/mpfloat.go)
and gofmt (for rewriting call sites).
Passes toolstash -cmp.
Change-Id: Id76f4aee476ba740f48db33162463e7978c2083d
Reviewed-on: https://go-review.googlesource.com/20909
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Fixed bug that slipped probably slipped in after rebasing and
explain why it failed on nacl/netbsd/plan9, which set default
maxparallelism to 1.
Change-Id: I4d59682fb2843d138b320334189f53fcdda5b2f6
Reviewed-on: https://go-review.googlesource.com/20980
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The Linux ABI takes arguments in a different order on s390x.
Change-Id: Ic9cfcc22a5ea3d8ef77d4dd0b915fc266ff3e5f7
Reviewed-on: https://go-review.googlesource.com/20960
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Minimum architecture of z196 required so that GCC can assemble
gcc_s390x.S in runtime/cgo.
Change-Id: I603ed2edd39f826fb8193740ece5bd11d18c3dc5
Reviewed-on: https://go-review.googlesource.com/20876
Reviewed-by: Ian Lance Taylor <iant@golang.org>
It was just a funny way of saying len(Ctxt.Allsym) by now.
Change-Id: Iff75e73c9f7ec4ba26cfef479bbd05d7dcd172f5
Reviewed-on: https://go-review.googlesource.com/20973
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Nothing cares about it.
I did this after looking at the memprof output, but it helps performance a bit:
name old s/op new s/op delta
LinkCmdGo 0.44 ± 3% 0.43 ± 3% -2.20% (p=0.000 n=94+90)
LinkJuju 3.98 ± 5% 3.94 ± 5% -1.19% (p=0.000 n=100+91)
As well as MaxRSS (i.e. what /usr/bin/time -f '%M' prints):
name old MaxRSS new MaxRSS delta
LinkCmdGo 130k ± 0% 120k ± 3% -7.79% (p=0.000 n=79+90)
LinkJuju 862k ± 6% 827k ± 8% -4.01% (p=0.000 n=100+99)
Change-Id: I6306b7b3369576a688659e2ecdb0815b4152ae96
Reviewed-on: https://go-review.googlesource.com/20972
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Debugasm can never be set in cmd/link, so delete it and the code it enables.
Change-Id: If828db0b09f1a9e512dc660ac2750657a769094c
Reviewed-on: https://go-review.googlesource.com/20971
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This expression in readsym:
dup != nil && len(dup.P) > 0 && strings.HasPrefix(s.Name, "gclocals·")
can never be true: if dup != nil, then s.Name is ".dup" (and this is not new:
the same broken logic is present in 1.4, at least). Delete the whole block.
Change-Id: I33b14d9a82b292116d6fd79d22b38e3842501317
Reviewed-on: https://go-review.googlesource.com/20970
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The obj.Nocache helper was only used by the arm back end, move it there.
Change-Id: I5c9faf995499991ead1f3d8c8ffc3b6af7346876
Reviewed-on: https://go-review.googlesource.com/20868
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Add a special helper for its one external use.
This is in preparation for an upcoming CL.
Passes toolstash -cmp / buildall.
Change-Id: I9d3463792afe220cc4bc89269bdecf0279abd281
Reviewed-on: https://go-review.googlesource.com/20933
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL addresses a long standing CL by rsc by pushing the use of
Link.Windows down to its two users.
Link.Window was always initalised with the value of runtime.GOOS so
this does not affect cross compilation.
Change-Id: Ibbae068f8b5aad06336909691f094384caf12352
Reviewed-on: https://go-review.googlesource.com/20869
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
'b' is a standard verb for floating point values. The runes like '+'
and '#' are called "flags" by package fmt's documentation. The flag
'-' controls left/right justification, not anything related to signs.
Change-Id: Ia9cf81b002df373f274ce635fe09b5bd0066aa1c
Reviewed-on: https://go-review.googlesource.com/20930
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Another object file change, gives a reasonable improvement:
name old s/op new s/op delta
LinkCmdGo 0.46 ± 3% 0.44 ± 9% -3.34% (p=0.000 n=98+82)
LinkJuju 4.09 ± 4% 3.92 ± 5% -4.30% (p=0.000 n=98+99)
I guess the data section could be mmap-ed instead of read, I haven't tried
that.
Change-Id: I959eee470a05526ab1579e3f5d3ede41c16c954f
Reviewed-on: https://go-review.googlesource.com/20928
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
In tests TransportPersistConnLeak and TransportPersistConnLeakShortBody,
there's a fixed wait time (100ms and 400ms respectively) to allow
goroutines to exit after CloseIdleConnections is called. This
is sometimes too short on a slow host running many simultaneous
tests.
This CL replaces the fixed sleep in each test with a sequence of
shorter sleeps, testing the number of remaining goroutines until
it reaches the threshold or an overall time limit of 500ms expires.
This prevents some failures in the plan9_arm builder, while reducing
the test time on faster machines.
Fixes#14887
Change-Id: Ia5c871062df139e2667cdfb2ce8283e135435318
Reviewed-on: https://go-review.googlesource.com/20922
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
For a long time varexpr has handled ODOT incorrectly: it has always
returned false. Before https://golang.org/cl/20890 this has been
because an ODOT had a Right field with an ONAME with no Class, for which
varexpr returns false. CL 20890 preserved the behavior of varexpr for
ODOT, so that the change would pass toolstash -cmp.
This CL fixes varexpr so that ODOT can return true in some cases. This
breaks toolstash -cmp. While the changed compiler allocates temporary
variables in a different order, I have not been able to find any
examples where the generated code is different, other than using
different stack offsets and, in some cases, registers. It seems that
other parts of the compiler will force the ODOT into a temporary anyhow.
Still, this change is clearly correct, and is a minor compiler cleanup.
Change-Id: I71506877aa3c13966bb03c281aa16271ee7fe80a
Reviewed-on: https://go-review.googlesource.com/20907
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Historically ODOT and friends have been considered to cost an extra
budget point when deciding whether they should be inlined, because they
had an ONAME node that represented the name to the right of the dot.
This doesn't really make sense, as in general that symbol does not add
any extra instructions; it just affects the offset of the load or store
instruction. And the ONAME node is gone now. So, remove the extra
cost.
This does not pass toolstash -cmp, as it changes inlining decisions.
For example, mspan.init in runtime/mheap.go is now considered to be an
inlining candidate.
Change-Id: I5ad27f08c66fd5daa4c8472dd0795df989183f5e
Reviewed-on: https://go-review.googlesource.com/20891
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reduces size of archives in pkg/linux_amd64 by 3% from 41.5MB to 40.2MB
Change-Id: Id64ca7995de8dd84c9e7ce1985730927cf4bfd66
Reviewed-on: https://go-review.googlesource.com/20912
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Deduplicate the verb switch for signed and unsigned integer formatting.
Make names of integer related functions consistent
with names of other fmt functions.
Consolidate basic integer tests.
Change-Id: I0c19c24f1c2c06a3b1a4d7d377dcdac3b36bb0f5
Reviewed-on: https://go-review.googlesource.com/20831
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
In golang.org/cl/20602, I changed the semantics of Eqtype to stop
checking the receiver parameters for type equality, and pushed this
responsibility to addmethod (the only Eqtype caller that cared).
However, I accidentally made the check stricter by making it start
requiring that receiver names were identical.
In general, this is a non-problem because the receiver names in export
data will always match the original source. But running
GO_GCFLAGS=-newexport ./all.bash at one point tries to load both old
and new format export data for package sync, which reveals the
problem. (See golang.org/issue/14877 for details.)
Easy fix: just check the receiver type for type equality in addmethod,
instead of the entire receiver parameter list.
Fixes#14877.
Change-Id: If10b79f66ba58a1b7774622b4fbad1916aba32f1
Reviewed-on: https://go-review.googlesource.com/20906
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Most 64-bit x86 ops can only take a signed 32-bit constant.
Clean up our rewrite rules to enforce this restriction.
Modify the assembler to fail if the offset does not fit
in the instruction.
That last check triggers a few times on weird testing code.
Suppress those errors if the compiler itself generated errors.
Fixes#14862
Change-Id: I76559af035b38483b1e59621a8029fc66b3a5d1e
Reviewed-on: https://go-review.googlesource.com/20815
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Changes the integer function to restore the original f.zero value
and therefore padding type before returning.
Change-Id: I456449259a3d39bd6d62e110553120c31ec63f23
Reviewed-on: https://go-review.googlesource.com/20512
Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
handleMethods can format Error() and String() directly as its known
these return strings that can be directly printed using fmtString.
Remove the obsolete depth argument from handleMethods.
Remove the depth argument from printArg since it is only ever
called with depth set to 0. Recursion for formatting complex
arguments is handled only by printValue which keeps track of depth.
Change-Id: I4c4be588751de12ed999e7561a51bc168eb9eb2d
Reviewed-on: https://go-review.googlesource.com/20911
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
The Node type ODOT and its variants all represent a selector, with a
simple name to the right of the dot. Before this change this was
represented by using an ONAME Node in the Right field. This ONAME node
served no useful purpose. This CL changes these Node types to store the
symbol in the Sym field instead, thus not requiring allocating a Node
for each selector.
When compiling x/tools/go/types this CL eliminates nearly 5000 calls to
newname and reduces the total number of Nodes allocated by about 6.6%.
It seems to cut compilation time by 1 to 2 percent.
Getting this right was somewhat subtle, and I added two dubious changes
to produce the exact same output as before. One is to ishairy in
inl.go: the ONAME node increased the cost of ODOT and friends by 1, and
I retained that, although really ODOT is not more expensive than any
other node. The other is to varexpr in walk.go: because the ONAME in
the Right field of an ODOT has no class, varexpr would always return
false for an ODOT, although in fact for some ODOT's it seemingly ought
to return true; I added an && false for now. I will send separate CLs,
that will break toolstash -cmp, to clean these up.
This CL passes toolstash -cmp.
Change-Id: I4af8a10cc59078c436130ce472f25abc3a9b2f80
Reviewed-on: https://go-review.googlesource.com/20890
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Consider functions with an ODCLCONST for inlining and modify exprfmt to
ignore those nodes when exporting. Don't add symbols to the export list
if there is no definition. This occurs when OLITERAL symbols are looked
up via Pkglookup for non-exported symbols.
Fixes#7655
Change-Id: I1de827850f4c69e58107447314fe7433e378e069
Reviewed-on: https://go-review.googlesource.com/20773
Run-TryBot: Todd Neal <todd@tneal.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Missed this in review of 20812
Change-Id: I01e220499dcd58e1a7205e2a577dd9630a8b7174
Reviewed-on: https://go-review.googlesource.com/20819
Reviewed-by: Keith Randall <khr@golang.org>
Remove rewriting of flags before calling formatters.
Change Flag method to directly take plusV and sharpV flags
into account when reporting if plus or sharp flag is set.
Change-Id: Ic3423881ad89e5a5f9fff5ab59e842062394ef6d
Reviewed-on: https://go-review.googlesource.com/20859
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
This ought to revert the bad effects of
https://go-review.googlesource.com/#/c/20775/
If you don't pass BOOT_GO_GCFLAGS, you get the
old behavior.
Tweaked to allow multiple space-separated flags in
BOOT_GO_GCFLAGS.
Change-Id: I2a22a04211b4535d1c5a8ec7a8a78cb051161c31
Reviewed-on: https://go-review.googlesource.com/20871
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
plan9, nacl, and netbsd to be precise.
Only the first test causes a hang, but just to be sure.
Change-Id: I400bb356ee2a0cf12c8666c95af79c924d1629aa
Reviewed-on: https://go-review.googlesource.com/20839
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Phi splitting sometimes leads to a phi with only a single predecessor.
This must be replaced with a copy to maintain a valid SSA form.
Fixes#14857
Change-Id: I5ab2423fb6c85a061928e3206b02185ea8c79cd7
Reviewed-on: https://go-review.googlesource.com/20826
Reviewed-by: Keith Randall <khr@golang.org>
API is not exposed yet.
Change-Id: I729360ef2be1d8ea683ca93cdb1763897cc8657c
Reviewed-on: https://go-review.googlesource.com/18895
Reviewed-by: Russ Cox <rsc@golang.org>
testing.go:
- run method will evolve into the Run method.
- added level field in common
benchmark.go:
- benchContext will be central to distinguish handling of benchmarks
between normal Run methods and ones called from within Benchmark
function.
- expandCPU will evolve into the processing hook for Run methods
called within normal processing.
- runBench will evolve into the Run method.
Change-Id: I1816f9985d5ba94deb0ad062302ea9aee0bb5338
Reviewed-on: https://go-review.googlesource.com/18894
Reviewed-by: Russ Cox <rsc@golang.org>
The biggest change is that each test is now responsible for managing
the starting and stopping of its parallel subtests.
The "Main" test could be run as a tRunner as well. This shows that
the introduction of subtests is merely a generalization of and
consistent with the current semantics.
Change-Id: Ibf8388c08f85d4b2c0df69c069326762ed36a72e
Reviewed-on: https://go-review.googlesource.com/18893
Reviewed-by: Russ Cox <rsc@golang.org>
There's nothing guaranteeing that the *Regexp isn't in active use,
and so copying the sync.Mutex value is invalid.
Updates #14839.
Change-Id: Iddf52bf69df1b563377922399f64a571f76b95dd
Reviewed-on: https://go-review.googlesource.com/20841
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
This seems to help the problem reported in #14606; this
change seems to produce about a 4% improvement (mostly
for the 128-8192 shards).
Fixes#14789.
Change-Id: I1bd52c82d4ca81d9d5e9ab371fdfc860d7e8af50
Reviewed-on: https://go-review.googlesource.com/20660
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Improve the test by also translating " " to "_".
Fixes#14671.
Change-Id: Ie5997934b93c7663d7b8432244fad47bb5d3ffbe
Reviewed-on: https://go-review.googlesource.com/20714
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is intended to help debug compiler problems that pop
up in the bootstrap phase of make.bash. GO_GCFLAGS does not
normally apply there. Options-for-all phases is intended
to allow crude tracing (and full timing) by turning on timing
for all phases, not just one.
Phase names can also be specified using a regular expression,
for example
BOOT_GO_GCFLAGS=-d='ssa/~^.*scc$/off' \
GO_GCFLAGS='-d=ssa/~^.*scc$/off' ./make.bash
I just added this because it was the fastest way to get
me to a place where I could easily debug the compiler.
Change-Id: I0781f3e7c19651ae7452fa25c2d54c9a245ef62d
Reviewed-on: https://go-review.googlesource.com/20775
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change makes unexposed methods start with lowercase letters for
avoiding unnecessary confusion because the net package uses many
embedding structures and intrefaces for controlling exposure of APIs.
Note that this change leaves DNS-related methods as they are.
Change-Id: I253758d1659175c5d0af6b2efcd30ce83f46543d
Reviewed-on: https://go-review.googlesource.com/20784
Run-TryBot: Mikio Hara <mikioh.mikioh@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The critical phase did not correctly maintain the use count
when two predecessors of a new critical block transmit the
same value.
Change-Id: Iba802c98ebb84e36a410721ec32c867140efb6d4
Reviewed-on: https://go-review.googlesource.com/20822
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Todd Neal <todd@tneal.org>
* This the simplest solution I could came up with
that doesn't required changing the compiler.
* The bound checks become constants now
so they are removed during opt phase.
Updates #14808
Change-Id: If32c33d7ec08bb400321b465015d152f0a5d3001
Reviewed-on: https://go-review.googlesource.com/20654
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Make sure we don't generate write barriers in runtime
code that is marked to forbid write barriers.
Implement the optimization that if we're writing a sliced
slice back to the location it came from, we don't need a
write barrier.
Fixes#14784
Change-Id: I04b6a3b2ac303c19817e932a36a3b006de103aaa
Reviewed-on: https://go-review.googlesource.com/20791
Reviewed-by: Austin Clements <austin@google.com>
Reduces size of archives in pkg/linux_amd64 by 1.4MB (3.2%),
slightly improving link time.
name old s/op new s/op delta
LinkCmdGo 0.52 ± 3% 0.51 ± 2% -0.65% (p=0.000 n=98+99)
Change-Id: I7e265f4d4dd08967c5c5d55c1045e533466bbbec
Reviewed-on: https://go-review.googlesource.com/20802
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Boolean expressions involving t.Thistuple were converted to use
t.Recv(), because it's a bit clearer and will hopefully reveal cases
where we could remove redundant calls to t.Recv() (in followup CLs).
The other cases were all converted to use t.Recvs().NumFields(),
t.Params().NumFields(), or t.Results().NumFields().
Change-Id: I4df91762e7dc4b2ddae35995f8dd604a52c09b09
Reviewed-on: https://go-review.googlesource.com/20796
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
We never need a type hash for a method type, so skip trying to
overwrite Thistuple.
Change-Id: I8de6480ba5fd321dfa134facf7661461d298840e
Reviewed-on: https://go-review.googlesource.com/20795
Reviewed-by: Russ Cox <rsc@golang.org>
This is an automated rewrite of all the calls of the form:
for f, it := IterFields(t); f != nil; f = it.Next() { ... }
Followup CLs will work on cleaning up the remaining cases.
Change-Id: Ic1005ad45ae0b50c63e815e34e507e2d2644ba1a
Reviewed-on: https://go-review.googlesource.com/20794
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Analogous to the Nodes type used as a more space efficient []*Node
representation.
Passes toolstash -cmp.
Change-Id: I8341e45304777d6e4200bd36dadc935b07ccf3ff
Reviewed-on: https://go-review.googlesource.com/20793
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
