When there is an explicit name for an import spec, treat it as its own
identifier, separate from the import path.
Example:
import h "hello"
The name h is defined in that import spec, not in the package hello
it contains its own references. If asked about a position within the
import path, continue treating that as referencing the imported package.
If the position is within the name, use the identifier there that is
local to that file.
This change allows for go to definition of the explicit name to point to
itself, find all references from the import spec, and rename the
explicit name from the import spec.
Change-Id: Ia1d927a26e73f2dc450d256d71909c006bdf4c37
Reviewed-on: https://go-review.googlesource.com/c/tools/+/191164
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Since renaming an identifier within an import spec is not yet supported,
return an error when this is encountered. These idents from the import
spec have a nil declaration object.
Import paths that contain '.' or '/' are caught by the valid identifier check
avoiding the crash, but import paths such as "fmt" are not as fmt is a
valid identifier. This change checks if i.decl.obj is nil and returns an error
if it is to avoid the crash.
Fixesgolang/go#33768
Change-Id: I4e757b42bedffd648fc821590e4a383826200dc3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/191163
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Optimize a few things to speed up deep completions:
- item() is slow, so don't call it unless the candidate's name matches
the input.
- We only end up returning the top 3 deep candidates, so skip deep
candidates early if they are not in the top 3 scores we have seen so
far. This greatly reduces calls to item(), but also avoids a
humongous sort in lsp/completion.go.
- Get rid of error return value from found(). Nothing checked for this
error, and we spent a lot of time allocating the only possible error
"this candidate is not accessible", which is not unexpected to begin
with.
- Cache the call to types.NewMethodSet in methodsAndFields(). This is
relatively expensive and can be called many times for the same type
when searching for deep completions.
- Avoid calling deepState.chainString() twice by calling it once and
storing the result on the candidate.
These optimizations sped up my slow completion from 1.5s to
0.5s. There were around 200k deep candidates examined for this one
completion. The remaining time is dominated by the fuzzy
matcher. Obviously 500ms is still unacceptable under any
circumstances, so there will be subsequent improvements to limit the
deep completion search scope to make sure we always return completions
in a reasonable amount of time.
I also made it so there is always a "matcher" set on the
completer. This makes the matching logic a bit simpler.
Change-Id: Id48ef7031ee1d4ea04515c828277384562b988a8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190522
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
this moves the actual diff algorithm into a different package and then provides hooks so it can be easily replaced with an alternate algorithm.
Change-Id: Ia0359f58878493599ea0e0fda8920f21100e16f1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190898
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Test that having a comment at the start of a file allows imports
to be added correctly.
Updates golang/go#33721
Change-Id: Id1673c2509537413710b73261ad2a59afe06b93f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190800
Run-TryBot: Suzy Mueller <suzmue@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Insert imports into existing multiline import declarations when
possible.
Logic for choosing where to insert taken from
golang.org/x/tools/go/ast/astutil.
Change-Id: Ie5ad96d5e3d5db2e92a2c05a6104d14a4a192ed3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190598
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Unimported packages may be suggested as completion items. Since these
are not yet imported, they should be ranked lower than other candidates.
They also require an additional import statement to be valid, which is
provided as an AdditionalTextEdit.
Adding this import does not use astutil.AddNamedImport, to avoid
editing the current ast and work even if there are errors. Additionally,
it can be hard to determine what changes need to be made to the source
document from the ast, as astutil.AddNamedImport includes a merging
pass. Instead, the completion item simply adds another import
declaration.
Change-Id: Icbde226d843bd49ee3713cafcbd5299d51530695
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190338
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This is the first in a series of many changes that will change the API
of the source package to use different types for positions. Using
token.Pos is particularly fragile, since the pos has to refer to the
specific *ast.File from which it was derived.
Change-Id: I70c9b806f7dd45b2e229954ebdcdd86e2cf3bbbb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190340
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Rename checks all of the packages that may be affected for conflicts. An
error in any of them leads to renaming error. Returning errors from
multiple packages may be confusing (for example, when there is a test
variant of a package and the same error appears twice). This change
stops after an error is found and returns that error instead of
continuing to search.
Change-Id: Ifba1feddbf8829d3aad30309154d578967e05a36
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190416
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
this shuffles things so there a single exporter API rather than an observer
It also removes most of the globals.
per telemetry type.
Change-Id: Iaa82abe2ded1fff9df8e067ed4a55bcbd9d9591f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190405
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
This change will just make it a bit easier to debug the context
cancellation errors.
Change-Id: I580751ac04e3357031678eb31914828029c96e4b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190412
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This is a straight move of some code with no changes.
It splits the part of the telemetry code that will become a standalone library from the bit that belongs in the lsp.
Change-Id: Icedb6bf1f3711da9251450531729984df6df7787
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190403
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This fix adds all packages to the renamer packages map.
Renaming performs checks on each package to make sure there are no
conflicts. If there are multiple packages, each package needs to be
checked. The packages were being incorrectly added to the map and were
all being put under a single key.
Fixesgolang/go#33664
Change-Id: I68466ce34ac49b700ce6d14ce0b53e2795926fa9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190399
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Make use of the existing fuzzy matcher to perform server side fuzzy
completion matching. Previously the server did exact prefix matching
for completion candidates and left fancy filtering to the
client. Having the server do fuzzy matching has two main benefits:
- Deep completions now update as you type. The completion candidates
returned to the client are marked "incomplete", causing the client
to refresh the candidates after every keystroke. This lets the
server pick the most relevant set of deep completion candidates.
- All editors get fuzzy matching for free. VSCode has fuzzy matching
out of the box, but some editors either don't provide it, or it can
be difficult to set up.
I modified the fuzzy matcher to allow matches where the input doesn't
match the final segment of the candidate. For example, previously "ab"
would not match "abc.def" because the "b" in "ab" did not match the
final segment "def". I can see how this is useful when the text
matching happens in a vacuum and candidate's final segment is the most
specific part. But, in our case, we have various other methods to
order candidates, so we don't want to exclude them just because the
final segment doesn't match. For example, if we know our candidate
needs to be type "context.Context" and "foo.ctx" is of the right type,
we want to suggest "foo.ctx" as soon as the user starts inputting
"foo", even though "foo" doesn't match "ctx" at all.
Note that fuzzy matching is behind the "useDeepCompletions" config
flag for the time being.
Change-Id: Ic7674f0cf885af770c30daef472f2e3c5ac4db78
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190099
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change eliminates the need for the package cache map, and instead
stores package type information in the store. We still have to maintain
invalidation logic because the key is not computed correctly.
Change-Id: I1c2a7502b99491ef0ff68d68c9f439503d531ff1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185438
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
When it is certain we are completing a struct field name, we don't
want deep completions. The only possible completions are the remaining
field names.
I also silenced the log spam in tests by disabling the go/packages
logger and the lsp logger.
Fixesgolang/go#33614
Change-Id: Icec8d92112b1674fa7a6a21145ab710d054919b4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190097
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change configures the ordering of documentation on hover. If the
user has requested full documentation, the signature appears at the top,
to avoid the user having to scroll. Otherwise, the signature appears at
the bottom, to minimize the distance between the triggering identifier
and the signature.
Updates golang/go#33352
Change-Id: I017baaabd0ee0c31cb13cb6abdda296782929823
Reviewed-on: https://go-review.googlesource.com/c/tools/+/189943
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change fixes documentation for completion items by using cached
package and AST information to derive the documentation. We also add
testing for documentation in completion items.
Change-Id: I911fb80f5cef88640fc06a9fe474e5da403657e3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/189237
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
We're still leaving open the possibility of changing this API,
but things have baked for a bit so I feel comfortable removing the
build tag.
Also add some documentation.
Change-Id: I3beb666b58177553fc406dc9670d569d5928fedd
Reviewed-on: https://go-review.googlesource.com/c/tools/+/189460
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This is probably a better approach than showing an extra diagnostic,
since a user cannot dismiss a diagnostic.
Fixesgolang/go#33397
Change-Id: I92b9a00f51a463673993793abfd4cfb99ce69a91
Reviewed-on: https://go-review.googlesource.com/c/tools/+/188766
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This relates to https://github.com/golang/go/issues/31374 and should switch all instances within `gopls` to use `x/errors` instead of `fmt` to create new errors.
Change-Id: I18339b75d12418d852e0dcc2ba0ed6c2970783b3
GitHub-Last-Rev: f4a55d9b79e7458ef1f1e06cb5eabbabd884f321
GitHub-Pull-Request: golang/tools#108
Reviewed-on: https://go-review.googlesource.com/c/tools/+/179880
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Get quick fixes for the diagnostics related to import errors. These
fixes add, remove, or rename exactly one import.
This change exposes the individual fixes found by the imports package,
and then applies each of them separately to the source. Since applying each
fix requires a new ast anyway, we pass in the source to be parsed each time.
Change-Id: Ibcbfa703d21b6983d774d2010716da8c25525d4f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/188059
Run-TryBot: Suzy Mueller <suzmue@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The results of running 'go list -m' are only valid as long as the
current module and the modules in its replace directives do not
change their go.mod files. Store the 'go.mod' versions that are
used in the imports call, and reinitialize the module resolver if
they change.
Change-Id: Idb73c92b9e4dc243a276885e5333fafd2315134d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/186597
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Packages with errors may still contain files that can be formatted.
Try to format the source of the files in packages that have errors.
This change will still not format files with parse errors.
Updates golang/go#31291
Change-Id: Ia5168d7908948d201eac7f2ee28534022a2d4eb0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/187757
Run-TryBot: Suzy Mueller <suzmue@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Save the packages found when scanning of the module cache.
The computed package may have a different import path due
to replace directives, so this needs to be updated
when the moduleResolver is initialized again.
Change-Id: Ib575fcc59b814ff263b431362df3698839a282f6
Reviewed-on: https://go-review.googlesource.com/c/tools/+/186301
Run-TryBot: Suzy Mueller <suzmue@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change adds a Logf field to the packages.Config.
Change-Id: I144a9a1e1181585bbe621898c4a3e6a007a38322
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185993
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
The imports ProcessEnv contains cached module and filesystem state. This change
allows gopls to use the same ProcessEnv and resolver across multiple calls to the
internal/imports library.
A ProcessEnv belongs to a view, because the cached module state depends
on the module that is open in the workspace.
Since we do not yet track whether the 'go.mod' file has changed, we
conservatively reset the cached state in the module resolver before
every call to imports.Process.
Change-Id: I27c8e212cb0b477ff425d5ed98a544b27b7d92ee
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184921
Run-TryBot: Suzy Mueller <suzmue@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change removes the need for the ast and token fields on the *goFile
object. We switch to using source.ParseGoHandles on the package, which
means that we can easily access both the AST and token via the package,
which is already cached.
Change-Id: I5f78bbe09362f4d95eb15556617bdbd809a7a55d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185878
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Noticed this because I was accidentally running these tests with Go
1.11.
Change-Id: Ic35d71bd1da9078b4bde6aa2ed62d54a8b95b0e0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/186298
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Suzy Mueller <suzmue@golang.org>
We recommend that gopls integrators apply the []TextEdit responses in
reverse order to get a correct resulting document. This strategy works
when the response is already sorted. Have gopls return sorted []TextEdit
for each file.
Fixesgolang/go#33123
Change-Id: Ib570881c9623695d2ae3194fa8a97b0a681a3250
Reviewed-on: https://go-review.googlesource.com/c/tools/+/186258
Run-TryBot: Suzy Mueller <suzmue@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
And purge the loggers from the view and session.
Change-Id: I262958f340e9a5ac9cc9b3db9e9910381e457478
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185989
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change merely modifies session.DidOpen to accept the document's
language ID. It does not actually add any handling of the language ID.
Change-Id: I2582ae307d1ca062f37b4683907cdbcfdfc61809
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184160
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
also change the return type to be and end function and not an incomplete span
Change-Id: Icd99d93ac98a0f8088f33e905cf1ee3fe410c024
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185349
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Since 'IdentifierInfo' doesn't contain ast node of import spec,
gopls will construct an empty string under plaintext mode and
'```go\n\n```' under markdown mode for *ast.ImportSpec. For now,
the hovering result of import spec is the corresponding node
format.
Fixesgolang/go#33000
Change-Id: I4c25782ddb5bcc557ace82f46d480316b0b90509
GitHub-Last-Rev: 150728f401c5f9b161b557584ad3250f46e50869
GitHub-Pull-Request: golang/tools#134
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185357
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
For all uses inside the lsp we use the detatch logic instead
For tests we build it in the test harness instead
This is in preparation for things on the context becomming important
Change-Id: I7e6910e0d3581b82abbeeb09f9c22a99efb73142
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185677
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Support renaming of identifiers in test packages. The packages for
all of the references must be checked and the changes need to be
deduped, since both a package and its test package contain some of the
same files.
Fixesgolang/go#32974
Change-Id: Ie51e19716faae77ce7e5254eeb3956faa42c2a09
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185277
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds documentation to the completion items. This normally
should be done in completionItem/resolve, since it takes more time to
compute documentation. However, I am not sure if that latency incurred
by pre-computing documentation is actually significantly more than the
latency incurred by an extra call to 'completionItem/resolve'. This
needs to be investigated, so we begin by just precomputing all of the
documentation for each item.
Updates golang/go#29151
Change-Id: I148664d271cf3f1d089c1a871901e3ee404ffbe8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184721
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Objects for builtin types all have position token.NoPos. We do
not want all objects that have position token.NoPos to be matched
when we are looking for references for this object, so we need to
compare the names of the objects as well.
Fixesgolang/go#32991
Change-Id: I67e7aba9909ebcbb246203ea5c572debf996c792
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185247
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The satisfy package has a precondition for Finder.Find that requires
that the package has no type errors. If this is a check that we would
perform, give an error and do not rename.
Fixesgolang/go#32882
Change-Id: Id44b451bf86ff883fd78a6306f2b2565ad3bdeb9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184857
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This uses the new opencensus compatability layer to add telementry to some of
the functions in the lsp, in order to allow us to understand their costs and
call patterns.
Change-Id: I7df820cd4eace7a4840ac6397d5df402369bf0a7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/183419
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
A client can specify "IncludeDeclaration" in its ReferenceParams.
When they do so, we want to include the declaration, even if it was not
in the scope we searched for references.
Additionally, we also return the location of the declaration first in
the result array when it is included in the results.
Updates golang/go#32572
Change-Id: I12837cd98102ee8d531f0f4bac2fb7bded2564c0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184723
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Instead of defaulting to a one sentence synopsis for documentation on
hover, allow the user to configure the amount of documentation they want
to see. Right now, the options are none, some (using go/doc.Synopsis),
or all. We should add a 4th, single-line, mode, which will allow clients
like vim-go to stop stripping off documentation on hover.
Updates golang/go#32561
Change-Id: I529242da84b794636984d5ef2918b7252886f0ef
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184797
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Add some extra smarts when evaluating untyped constants as completion
candidates. Previously we called types.Default() on the expected type
and candidate type, but this loses the untypedness of an untyped
constant which prevents it from being assignable to any type or named
type other than the untyped constant's default type.
Note that the added logic does not take into account the untyped
constant's value, so you will still get some false positive
completions (e.g. suggesting an untyped negative integer constant when
only a uint would do). Unfortunately go/types doesn't provide a way of
answering the question "is this *types.Const assignable to this
types.Type" since types.AssignableTo only considers a constant's type,
not its value.
Change-Id: If7075642e928f712b127256ae7706a5190e2f42c
GitHub-Last-Rev: 124d2f05b0aec09c9d7004d9da0d900524185b92
GitHub-Pull-Request: golang/tools#128
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184477
Reviewed-by: Suzy Mueller <suzmue@golang.org>
Often anonymous functions can be passed as arguments to a function. In
these cases, it can be annoying for a user to see signature help for the
entire duration of their writing this function. This change detects if
the user is typing in a function literal and disables signature help in
that case.
Fixesgolang/go#31633
Change-Id: I7166910739b6e1ec0da2ec852336136b81d13be0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184260
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Suzy Mueller <suzmue@golang.org>
Support the renaming of the imported name of a package within a file.
This case needs to be special cased because the ident may be added or
removed.
Change-Id: I333bc2b2ca5ce81c4a2afb8b10035f525dfad464
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184199
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change modifies gopls to use the internal goimports library, which
allows us to manually configure the ProcessEnv. We also add a logger to
the ProcessEnv to allow this change not to conflict with gopls's logging
mechanism.
Fixesgolang/go#32585
Change-Id: Ic9aae69c7cfbc9b1f2e66aa8d812175dbc0065ce
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184198
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
As per discussion on golang/go#32810, to avoid the `go list` storm caused by many
files being opened, we check if the file content opened is equivalent to
the content on disk. If so, we mark this file as "on disk" so that we
don't send it as an overlay to go/packages.
Updates golang/go#32810
Change-Id: I0a520cf91bbe933c9afb76d0842f5556ac4e5b28
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184257
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Find references to identifiers in both a package and its test package.
Change-Id: I9d9da4aa37c36c448336aed044df79cfd1c903f1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/183990
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
There was a situation where we were trying to re-acquire a lock that was
already held. This change solves this issue.
Change-Id: I97cf6bad7e7c219a267e3ca5d174a2573f70ebe2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184217
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The identifier in a reference is used to check for a doc comment.
Implicits do not have an ident, so do not use that to look for a doc
comment.
Also set the context.Context for the renamer.
Change-Id: I085d9e6c11d919222592dcb6fb30982eeb0fc7cd
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184042
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Deep completion refers to searching through an object's fields and
methods for more completion candidates. For example:
func wantsInt(int) { }
var s struct { i int }
wantsInt(<>)
Will now give a candidate for "s.i" since its type matches the
expected type.
We limit to three deep completion results. In some cases there are
many useless deep completion matches. Showing too many options defeats
the purpose of "smart" completions. We also lower a completion item's
score according to its depth so that we favor shallower options. For
now we do not continue searching past function calls to limit our
search scope. In other words, we are not able to suggest results with
any chained fields/methods after the first method call.
Deep completions are behind the "useDeepCompletions" LSP config flag
for now.
Change-Id: I1b888c82e5c4b882f9718177ce07811e2bccbf22
GitHub-Last-Rev: 26522363730036e0b382a7bcd10aa1ed825f6866
GitHub-Pull-Request: golang/tools#100
Reviewed-on: https://go-review.googlesource.com/c/tools/+/177622
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
As per the following guidance: "Try to keep the normal code path at a minimal indentation"
I know this is normally applied to error handling, but the same logic about improving readability applies here too.
Change-Id: Ib20dae9975e94b40fb6ff7049782375b18ef59ba
Change-Id: Ib20dae9975e94b40fb6ff7049782375b18ef59ba
GitHub-Last-Rev: 97919272de76ec15845556e032985c5969a277fa
GitHub-Pull-Request: golang/tools#125
Reviewed-on: https://go-review.googlesource.com/c/tools/+/183698
Reviewed-by: Suzy Mueller <suzmue@golang.org>
Run-TryBot: Suzy Mueller <suzmue@golang.org>
In type assertion expressions and type switch clauses we now infer the
type from which candidates must be assertable. For example in:
var foo io.Writer
bar := foo.(<>)
When suggesting concrete types we will prefer types that actually
implement io.Writer.
I also added support for the "*" type name modifier. Using the above
example:
bar := foo.(*<>)
we will prefer type T such that *T implements io.Writer.
Change-Id: Ib483bf5e7b339338adc1bfb17b34bc4050d05ad1
GitHub-Last-Rev: 965b028cc00b036019bfdc97561d9e09b7b912ec
GitHub-Pull-Request: golang/tools#123
Reviewed-on: https://go-review.googlesource.com/c/tools/+/183137
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This package is basically a library (even though it's internal) and
it's generally considered a bad practice for libraries to panic, so
don't.
Change-Id: I37d9d73ae48ececc6b31436f1076e1f85213f129
Change-Id: I37d9d73ae48ececc6b31436f1076e1f85213f129
GitHub-Last-Rev: 453b538e53e48889171d31829af3304409f9a8bc
GitHub-Pull-Request: golang/tools#124
Reviewed-on: https://go-review.googlesource.com/c/tools/+/183680
Reviewed-by: Suzy Mueller <suzmue@golang.org>
This change adds supports for a package belonging to multiple files.
It requires additional packages.Loads for all of the packages to which a
file belongs (for example, if a non-test file also belongs to a package's
test variant).
For now, we re-run go/packages.Load for each file we open, regardless of
whether or not we already know about it.
This solves the issue of packages randomly belonging to a test or not.
Follow-up work needs to be done to support multiple packages in
references, rename, and diagnostics.
Fixesgolang/go#32791Fixesgolang/go#30100
Change-Id: I0a5870a05825fc16cc46d405ef50c775094b0fbb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/183628
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change just separates minor changes made along the course of the
memoization CL out into their own change. This will clean up the diffs
in the memoization CL.
Change-Id: I7d59e05ba6472af5f1bf516b1e5b879a5815b9a5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/183250
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Replace doc comment text for the declaration of an identifier with the
new name.
This implementation is taken from golang.org/x/tools/refactor/rename.
Change-Id: Id1b80fad456646a46c8ae2caa4e8febf05aaf798
Reviewed-on: https://go-review.googlesource.com/c/tools/+/183261
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Before renaming a variable, check the package to make sure that this
renaming would not result in a conflict that could break the program.
All of the implementation is taken from "refactor/rename" with the
dependency on "go/loader" removed.
Change-Id: Ib0782ec8f247a6df1750f2c8213f69186699ce1a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/183257
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Previously we would always expand *types.Func completion candidates to
function calls, even if the expected type matched the function itself,
not its return value. Now we check the function itself before we check
its return value. This fixes cases like this:
func foo() int { return 0 }
var f func() int
f = <foo> // now completes to "foo" instead of "foo()"
Also, *types.Var function values were never getting expanded to calls.
I fixed the completion formatting to know that both *types.Func
and *types.Var objects might need to be invoked in the completion
item. This fixes cases like this:
foo := func() int { return 0 }
var i int
i = <foo()> // now completes to "foo()" instead of "foo"
Change-Id: I8d0e9e2774f92866a3dd881092c13019fb3f3fd5
GitHub-Last-Rev: 7442bc84b5bbb86296289bbc745ec56a5f89d901
GitHub-Pull-Request: golang/tools#122
Reviewed-on: https://go-review.googlesource.com/c/tools/+/182879
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change provides support to rename identifiers within a single
package.
The renaming is performed by finding all references to an identifier,
and then creating text edits to replace the existing text with the
new identifier.
Editing an import spec is not supported.
Fixes#27571
Change-Id: I0881b65a1b3c72d7c53d7d6ab1ea386160dc00fb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/182585
Run-TryBot: Suzy Mueller <suzmue@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
In situations like:
var buf bytes.Buffer
var w io.Writer = &b<>
if we want to complete to "buf" properly we need to apply the "&" type
modifier to buf's type of bytes.Buffer to see that it is assignable
to type io.Writer. Previously we applied type modifiers in reverse to
the "expected" type (io.Writer in this case), but that is obviously
incorrect in this situation since it is nonsensical to
dereference (the reverse of "&") io.Writer.
Change-Id: Ib7ab5761f625217e023286384c23b8c60e677aac
GitHub-Last-Rev: 4be528f2572c9c987334552e3f8a31d4eddce81a
GitHub-Pull-Request: golang/tools#121
Reviewed-on: https://go-review.googlesource.com/c/tools/+/182598
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Implicit local variables for type switches do not appear in the Uses
map and do not have objects associated with them. This change
associates all of the different types objects for the same local type
switch declaration with one another in the declaration.
The identifier for the implicit local variable does not have a type but
does have declaration objects.
Find references for type switch vars will return references to all the
identifiers in all of the case clauses and the declaration.
Fixesgolang/go#32584
Change-Id: I5563a2a48d31ca615c1e4e73b46eabca0f5dd72a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/182462
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
So we can surface their code actions later.
Change-Id: I735e5d025a1250861d49db227f5a79453f599140
Reviewed-on: https://go-review.googlesource.com/c/tools/+/182837
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Previously, if any one file in a package had a parse error, we would not
send type errors for any of the other files. Now we make this decision
per-file, so that, even if a file has parse errors, type errors in the
other files will be shown.
Fixesgolang/go#32596
Change-Id: I086c04f0ec37cd1b33845153328faf368232d834
Reviewed-on: https://go-review.googlesource.com/c/tools/+/182466
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
When checking if a completion candidate matches the expected type at
the cursor position, we now use types.AssignableTo instead of
types.Identical. This properly handles cases like using a concrete
type to satisfy an interface type.
Calling AssignableTo triggered some crashes related to the fake
"resolved" types we create. Their underlying type was nil, which is
not allowed. We now set their underlying type to the invalid type.
I've also rearranged things so expected type information lives in a
dedicated typeInference struct. For now there is no new information added,
but in subsequent commits there will be more metadata about the
expected type.
Change-Id: I14e537c548960c30e444cf512a4413d75bb3ee45
GitHub-Last-Rev: 7e64ebe32938562648938d7a480195d954b018f2
GitHub-Pull-Request: golang/tools#116
Reviewed-on: https://go-review.googlesource.com/c/tools/+/182358
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This changes the packageErrorSpan function into the listErrorSpan.
Previously, this was causing the gopls-generated errors to get parsed,
which would result in attempts to send diagnostics for invalid filenames.
Fixesgolang/go#32603
Change-Id: I7a54ed8884b78beb3f894598f18a24ed232f7412
Reviewed-on: https://go-review.googlesource.com/c/tools/+/182460
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change does not actually use the token handle for GetToken right
now, but implements the approach for memoizing *token.Files.
Change-Id: I75919f4e97abd6893b202c021adecd2c9dbfc2be
Reviewed-on: https://go-review.googlesource.com/c/tools/+/182277
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This adds support for the AllObjectFacts and AllPackageFacts features that were
added to the analysis library.
It also moves the list of analyzers to an exported global so it can be added to
easily.
Change-Id: Ibbe81b17b190d04a0e49510c23558430bc03ca70
Reviewed-on: https://go-review.googlesource.com/c/tools/+/182177
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
This adds an IDs map to the metadata cache, which maps package paths to
IDs. This is only ever used by the Import function in the type checker.
Change-Id: I8677d9439895bc6cbca5072e3fa9fddad4e165d5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/181683
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
We panic if the uri was not a valid file uri instead
They always are a valid file URI, and we would fail miserably to cope if they were
not anyway, and there are lots of places where we need to be able to get the filename
and don't want to cope with an error that cannot occur.
If we ever have not file uri's, you will have to check if it is a file before calling
.Filename, which seems reasonable anyway.
Change-Id: Ifb26a165bd43c2d310378314550b5749b09e2ebd
Reviewed-on: https://go-review.googlesource.com/c/tools/+/181017
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds an "experimentalDisabledAnalyses" configuration
to the "gopls" configuration. A user can specify a list of excluded
analyses by analyzer name.
Fixesgolang/go#31717
Change-Id: I4b162fcd61ecfcef5c926bd0e96f182748a7721d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/179920
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change implements the find all references feature by finding all of
the uses and definitions of the identifier within the current package.
Testing for references is done using "refs" in the testdata files and
marking the references in the package.
Change-Id: Ieb44b68608e940df5f65c3052eb9ec974f6fae6c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/181122
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change correctly invalidates the cache when we
have to go from a trimmed to untrimmed AST.
The "ignoreFuncBodies" behavior is still disabled due to a racy test.
Updates golang/go#30309
Change-Id: I6b89d1d2140d77517616cb3956721a157c25ab71
Reviewed-on: https://go-review.googlesource.com/c/tools/+/180857
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change refactors hover to generate documentation for just the
declaration portion of an identifier.
Updates golang/go#29151
Change-Id: I16d48a99b56c36132e49cc87e2736f85c88ed14a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/180657
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
On FileHandle Read now just returns the data hash and error
This makes it more obvious that you should handle the error, rather than hiding
it all in a struct.
We also change the way we get and return content, the main source.File
constructs now hold a FileHandle that then updates on invalidation
Change-Id: I20be1b995355e948244342130eafec056df10081
Reviewed-on: https://go-review.googlesource.com/c/tools/+/180417
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We split aquiring a "handle" from reading a files contents so that we can do the
former eagerly and the latter lazily.
We also "version" the handles so that the same file at different versions is a
different handle.
Change-Id: I06cc346d4b4c77d784aa454702c54689f2f177e0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/179917
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds a few simple tests for the goimports behavior of gopls.
There are still missing cases for non-standard library, but this is a
good start.
Change-Id: I2f9bc2cc876dcabf81413384b83fa3508517adf0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/179918
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Add 'buildFlags' config to processConfig and pass that value to packages.Config.
We can avoid incorrect diagnostics such as if current source codes require any build tags.
Change-Id: Id191469ec75eedaa82b75ec4fdec084fa78c2c5d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/178782
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
This change trims the function bodies from the ASTs of files belonging to
dependency packages. In these cases, we do not necessarily need full
file ASTs, so it's not necessary to store the function bodies in memory.
This change will reduce memory usage. However, it will also slow down
the case of a user opening a file in a dependency package, as we will
have to re-typecheck the file to get the full AST. Hopefully, this
increase in latency will not be significant, as we will only need to
re-typecheck a single package (all the dependencies should be cached).
Updates golang/go#30309
Change-Id: I7871ae44499c851d1097087bd9d3567bb27db691
Reviewed-on: https://go-review.googlesource.com/c/tools/+/178719
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change fixes a regression introduced by the building the builtin
package on demand. Although this change increases the startup tasks of
gopls, it is necessary to ensure that we ignore diagnostics from
builtin.go.
Change-Id: I897e747a273056d70cecba486a74c75a736d8f80
Reviewed-on: https://go-review.googlesource.com/c/tools/+/179921
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This will allow diagnostics to denote the range they apply to.
The ranges are now interpreted using the internal/span library.
This is primarily intended for the benefit of the LSP, which will
be able to (in future CLs) more accurately highlight the part
of the code a diagnostic applies to.
Change-Id: Ic35cec2b21060c9dc6a8f5ebb7faa62d81a07435
Reviewed-on: https://go-review.googlesource.com/c/tools/+/179237
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change adds a stub modFile struct for use in the future. It also
moves the singleDiagnostic function out into the lsp package, so that
the source package does not make decisions about what to show to the
user as a diagnostic.
Fixesgolang/go#32221
Change-Id: I577c66fcd3c1daadaa221b52ff36bfa0fe07fb53
Reviewed-on: https://go-review.googlesource.com/c/tools/+/178681
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
The Go file changes didn't actually check the file extensions for the
files the Go extension is receiving. This error was not noticed because
the VSCode extension doesn't yet actually send mod files to gopls yet,
but it will in its next release.
Fixesgolang/go#32178
Change-Id: Ia04d0a92ce7df13fcf4c601421bc000d69855f6d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/178679
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This moves the fileset down to the base cache, the overlays down to the session
and stores the environment on the view.
packages.Config is no longer part of any public API, and the config is build on
demand by combining all the layers of cache.
Also added some documentation to the main source pacakge interfaces.
Change-Id: I058092ad2275d433864d1f58576fc55e194607a6
Reviewed-on: https://go-review.googlesource.com/c/tools/+/178017
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Completions like "foo.Bar(baz.<>)" were replacing one too many
characters resulting in "foo.Bar(baz.Qux()". This is because the go
parser adds a phantom "_" identifier when parsing "foo.". We thought
the "_" was really there, so we were issuing text edits to replace
it. Fix by ignoring "_" selectors when the cursor is positioned to
their left.
Fixesmicrosoft/vscode-go#2525
Change-Id: I1233a9d6275e2a79b666ca0230862238160b4aab
GitHub-Last-Rev: de9a3f00187b1b9bfcc4e497461f4602ae6f8923
GitHub-Pull-Request: golang/tools#104
Reviewed-on: https://go-review.googlesource.com/c/tools/+/178217
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If a package has an error that makes it completely unparseable, such as containing a .go file with no "package" statement, the error was previously unreported. Such errors would manifest as other errors.
Fixesgolang/go#31712
Change-Id: I11b8d0e2e4d64b03fbcb4c35e7f0b02fccc83fad
GitHub-Last-Rev: 1581cbe36c269dd964f0b9226dbd63b1650c2a5b
GitHub-Pull-Request: golang/tools#102
Reviewed-on: https://go-review.googlesource.com/c/tools/+/177605
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
The insertion range for completion items was not right. The range's
end was 1 before the start. Fix by taking into account the length of
the prefix when generating the range start and end.
Now instead of a "prefix", we track the completion's
"surrounding". This is basically the start and end of the abutting
identifier along with the cursor position. When we insert the
completion text, we overwrite the entire identifier, not just the
prefix. This fixes postfix completion like completing "foo.<>Bar" to
"foo.BarBaz".
Fixesgolang/go#32078Fixesgolang/go#32057
Change-Id: I9d065a413ff9a6e20ae662ff93ad0092c2007c1d
GitHub-Last-Rev: af5ab4d60566bf0589d9a712c80d75280178cba9
GitHub-Pull-Request: golang/tools#103
Reviewed-on: https://go-review.googlesource.com/c/tools/+/177757
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change adds support for definitions and hover for builtin types and
functions. It also includes some small (non-logic) changes to the import
spec definition function.
Additionally, there are some resulting changes in diagnostics to ignore
the builtin file but also use it for definitions (Ian, you were right
with your comment on my earlier review...).
Fixesgolang/go#31696
Change-Id: I52d43d010a5ca8359b539c33e40782877eb730d0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/177517
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This is primarily to separate the levels because they have different cache
lifetimes and sharability.
This will allow us to share results between views and even between servers.
Change-Id: I280ca19d17a6ea8a15e48637d4445e2b6cf04769
Reviewed-on: https://go-review.googlesource.com/c/tools/+/177518
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change removes the explicit configuration for improved
documentation on hover. We use a comment's synopsis rather than the full
comment.
However, we also add a "noDocsOnHover" setting that is used by the cmd
tests. Ultimately, no one should use this setting and we should remove
it. We leave it temporarily because the cmd tests still need work.
Change-Id: I5488eca96a729ed7edad8f59b95af163903740d6
Reviewed-on: https://go-review.googlesource.com/c/tools/+/174378
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Calculate expected type in the following cases:
- switch case statements
- index expressions (e.g. []int{}[<>] or map[string]int{}[<>])
- slice expressions (e.g. []int{}[1:<>])
- channel send statements
- channel receive expression
We now also prefer type names in type switch clauses and type asserts.
Change-Id: Iff8c317a9116868b36701d931c802d9147f962d8
GitHub-Last-Rev: e039a45aebe1c6aa9b2011cad67ddaa5e4ed4d77
GitHub-Pull-Request: golang/tools#97
Reviewed-on: https://go-review.googlesource.com/c/tools/+/176941
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This abstracts out the concrete file type so that we can support non go files.
Change-Id: I7447daa2ce076ec2867de9e59a0dedfe1a0553f5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/175217
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We correcly cancel all background tasks and drop all active views when
the server is asked to shut down now.
This was mostly to support the command line being able to exit cleanly
Change-Id: Iff9f5ab51572aad5e3245dc01aa87b00dcd47963
Reviewed-on: https://go-review.googlesource.com/c/tools/+/174940
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change handles the case when a function that has already been
written out is being completed.
Change-Id: I0c4e9ec9bb5a8428526f00a4e62e020bcc30f0bf
Reviewed-on: https://go-review.googlesource.com/c/tools/+/176923
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
The cache now exposes only one symbol, NewView
This is preparing the cache for a re-write
Change-Id: I411c2cd7a7edc2e7c774218c6786f9fd4fcc53cb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/176924
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change uses the builtin package to derive the signature help for
builtin functions.
Updates golang/go#31696
Change-Id: I458b3a89bdf143e7018e8be7cb6a5e8c068a47c2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/176922
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
We were omitting the parens in function completions like "(foo<>)()"
because our check thought "foo" was the Fun in the outer CallExpr so
it already had parens. Fix by tightening up logic to only omit parens
for cases like "foo<>()" and "foo.bar<>()".
Change-Id: Ia602b80275f72baa6cdf6d61c22d3f3a6cfc3019
GitHub-Last-Rev: 41fecf92617e0812ee6552d8c43789eae83889bd
GitHub-Pull-Request: golang/tools#98
Reviewed-on: https://go-review.googlesource.com/c/tools/+/176944
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change stops diagnostics from running in files making up the "fake"
builtin package.
Fixesgolang/go#31962
Change-Id: Ic54e1587e3ad54f0c1f5e82f1a6f3522b4c6bee9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/177218
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
After some discussion about how to handle insert and filter text
(https://github.com/microsoft/vscode-languageserver-node/issues/488), it
seems that it is better practice to overwrite the prefix in completion
items, rather than trimming the prefix from the insert text.
Change-Id: I7c794b4b1d4518af31e7318a283aa3681a0cf66a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/176958
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Fix the following issues:
- We were trying to complete struct literal field names for
selector expressions (e.g. "Foo{a.B<>}"). Now we only complete field
names in this case if the expression is an *ast.Ident.
- We weren't including lexical completions in cases where you might be
completing a field name or a variable name (e.g. "Foo{A<>}").
I refactored composite literal logic to live mostly in one place. Now
enclosingCompositeLiteral computes all the bits of information related
to composite literals. The expected type, completion, and snippet code
make use of those precalculated facts instead of redoing the work.
Change-Id: I29fc808544382c3c77f0bba1843520e04f38e79b
GitHub-Last-Rev: 3489062be342ab0f00325d3b3ae9ce681df7cf2e
GitHub-Pull-Request: golang/tools#96
Reviewed-on: https://go-review.googlesource.com/c/tools/+/176601
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Improve expected type determination for the following cases:
- search back further through ast path to handle cases where the
position's node is more than two nodes from the ancestor node with
type information
- generate expected type for return statements
- wrap and unwrap pointerness from expected type when position is
preceded by "*" (dereference) or "&" (reference) operators,
respectively
- fix some false positive expected types when completing the "Fun"
(left) side of a CallExpr
Change-Id: I907ee3e405bd8420031a7b03329de5df1c3493b9
GitHub-Last-Rev: 20a0ac9bf2b5350494c6738f5960676cc50fb454
GitHub-Pull-Request: golang/tools#93
Reviewed-on: https://go-review.googlesource.com/c/tools/+/174477
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Now the "type" of a *ast.PkgName is the package it points to. Of
course, a package is not a real types.Type, but we can still jump you
there. We have to pick one of the package's files, so we choose the
longest one, hoping it is the most interesting.
Similarly, the "definition" of an *ast.ImportSpec is the package being
imported.
I also added a nil check for the package in SignatureHelp. This panics
for me occasionally.
Change-Id: Ide4640530a28bcec9da6de36723eb7f0e4cc941c
GitHub-Last-Rev: 8190baa0b908065db5b53f236de03d2f3bff39b5
GitHub-Pull-Request: golang/tools#92
Reviewed-on: https://go-review.googlesource.com/c/tools/+/174081
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Prior to this change, if a package was rendered invalid by a change in
one of its dependencies, diagnostics would not be propagated until the
user typed in one of the package's files. Now, these updated diagnostics
are sent along with the diagnostics for the dependency.
Fixesgolang/go#29817
Change-Id: I4761de31c4bdee820e024005f6112b3b3d2e1da6
Reviewed-on: https://go-review.googlesource.com/c/tools/+/174977
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change uses an *ast.Package built from the file
go/src/builtin/builtin.go. Completion (and ultimately other features)
will be resolved using this AST instead of being hardcoded.
Change-Id: I3e34030b3236994faa484cf17cf75da511165133
Reviewed-on: https://go-review.googlesource.com/c/tools/+/174381
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Now when you accept a struct literal field name completion, you will
get a snippet that includes the colon, a tab stop, and a comma if
the literal is multi-line. If you have "gopls.usePlaceholders"
enabled, you will get a placeholder with the field's type as well.
I pushed snippet generation into the "source" package so ast and type
info is available. This allows for smarter, more context aware snippet
generation. For example, this let me fix an issue with the function
snippets where "foo<>()" was completing to "foo(<>)()". Now we don't
add the function call snippet if the position is already in a CallExpr.
I also added a new "Insert" field to CompletionItem to store the plain
object name. This way, we don't have to undo label decorations when
generating the insert text for the completion response. I also changed
"filterText" to use this "Insert" field since you don't want the
filter text to include the extra label decorations.
Fixesgolang/go#31556
Change-Id: I75266b2a4c0fe4036c44b315582f51738e464a39
GitHub-Last-Rev: 1ec28b2395c7bbe748940befe8c38579f5d75f61
GitHub-Pull-Request: golang/tools#89
Reviewed-on: https://go-review.googlesource.com/c/tools/+/173577
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change separates the completion formatting functions from the
completion logic. It also simplifies the completion logic by necessary
values per-request into a struct that is used throughout.
Change-Id: Ieb6b09b7076ecf89c8b76ec12c1f1c9b10618cfe
Reviewed-on: https://go-review.googlesource.com/c/tools/+/173779
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Completion suppression in comments wasn't working for comments in
switch case statements, select case statements, and decl statements.
Rather than adding those to the list of leaf ast.Node types to look
for, we now always check if the position is in a comment. This fix
broke some completion tests that were using re"$" since "$" matches
after the comment "//" characters.
We now also don't complete within any literal values. Previously we
only excluded string literals.
Change-Id: If02f39f79fe2cd7417e39dbac2c6f84a484391ec
GitHub-Last-Rev: 7ab3f526b6752a8f74413dcd268382d359e1beba
GitHub-Pull-Request: golang/tools#88
Reviewed-on: https://go-review.googlesource.com/c/tools/+/173518
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
This change propagates more errors from analyses, instead of just saving
them in act.err, we actually return immediately. Ultimately, we'd want
to return to the previous behavior, but this will help us figure out
what's going wrong.
Updates golang/go#30786
Change-Id: I9d3288fd113c43775140e5c008e3e300b6d28c2a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/173497
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
When the value of a composite literal key/value pair was unparsable,
you were getting completions for the composite literal keys instead of
values. For example "struct { foo int }{foo: []<>" was completing to
the field name "foo". This was because the leaf ast.Node at the cursor
was the composite literal itself, and our go-back-one-character logic
was not happening because the preceding character's node
was *ast.BadExpr, not *ast.Ident. Fix by always generating the ast
path for the character before the cursor's position. I couldn't find
any cases where this broke completion.
I also added expected type detection for the following composite
literal cases:
- array/slice literals
- struct literals (both implicit and explicit field names)
- map keys and values
Fixesgolang/go#29153
Change-Id: If8cf678cbd743a970f52893fcf4a9b83ea06d7e9
GitHub-Last-Rev: f385705cc05eb98132e20561451dbb8c39b68519
GitHub-Pull-Request: golang/tools#86
Reviewed-on: https://go-review.googlesource.com/c/tools/+/173099
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds support for showing documentation when hovering over any
named type or function. For now, we show the entire comment associated
with the type; in future CLs, we should refine our approach and perhaps
only show the first line or sentence.
Updates golang/go#29151
Change-Id: Ib33284747b19acba67d79fb55c916574c3dd8073
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172958
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
When jumping to definition of an embedded struct pointer, be sure to
unwrap the pointer type so you properly jump to the pointee type.
Also, fix jumping to definition of an embedded struct inside an
anonymous struct inside a struct. The embedded struct detection was
continuing too far and thinking it wasn't an embedded struct when it
saw the anonymous struct.
Fixesgolang/go#31451
Change-Id: I96017764270712a2ae02a85306605495075d12e7
GitHub-Last-Rev: 9997f60855ebe37bcca2fecc1ba2a7b871f393d4
GitHub-Pull-Request: golang/tools#83
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172583
Run-TryBot: Paul Jolly <paul@myitcv.org.uk>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change associates an ast.Node for some object declarations.
In this case, we only handle type declarations, but future changes will
support other objects as well. This is the first step in adding
documentation on hover.
Updates golang/go#29151
Change-Id: I39ddccf4130ee3b106725286375cd74bc51bcd38
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172661
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
- show signature for function calls whose function expression is not
an object (e.g. the second call in foo()()). since the function name
is not available, we use the generic "func"
- only provide signature help when the position is on or within the
call expression parens. this is consistent with the one other lsp
server i tried (java). this improves the gopls experience in emacs
where lsp-mode is constantly calling "hover" and
"signatureHelp" ("hover" should be preferred unless you are inside
the function params list)
- use the entire signature type string as the label since that includes
the return values, which are useful to see
- don't qualify the function name with its package. it looks funny to
see "bytes.Cap()" as the help when you are in a call
to (*bytes.Buffer).Cap(). it could be useful to include invocant
type info, but leave it out for now since signature help is meant to
focus on the function parameters.
- don't turn variadic args "foo ...int" into "foo []int" for the
parameter information (i.e. maintain it as "foo ...int")
- when determining active parameter, count the space before a
parameter name as being part of that parameter (e.g. the space
before "b" in "func(a int, b int)")
- handle variadic params when determining the active param (i.e.
highlight "foo(a int, *b ...string*)" on signature help for final
param in `foo(123, "a", "b", "c")`
- don't generate an extra space in formatParams() for unnamed
arguments
I also tweaked the signatureHelp server log message to include the
error message itself, and populated the server's logger in lsp_test.go
to aid in development.
Fixesgolang/go#31448
Change-Id: Iefe0e1e3c531d17197c0fa997b949174475a276c
GitHub-Last-Rev: 5c0b8ebd87a8c05d5d8f519ea096f94e89c77e2c
GitHub-Pull-Request: golang/tools#82
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172439
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Also change the enum values to match the prior string conversion routine.
Change-Id: I23ac6a72c8e116c5ee05e9324356481e519781e9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172410
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We now set the diagnostic source in the diagnostics call rather than when
converting it to the LSP protocol.
Change-Id: Ic762aaab1b2bf93b75c4c3d78aa84e2f918398fc
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172408
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This is to help with debugging, and to allow us to write tests that do not
rely on hard coded constants.
Change-Id: Ica9ed5eee3d35539fe50d76276988852e62b81ca
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172401
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This allows us to use the diff.ApplyEdits in tests, saving us from a different
implementation.
It also prepares for command lines that need to use diff features based on the
results of a protocol message.
Splitting content into lines is too easy to get wrong, and needs to be done
correctly or the diff results make no sense. This adds the SplitLines function
to the diff pacakge to do it right and then uses it everwhere we we already
doing it wrong.
It also makes all the diff tests external black box tests.
Change-Id: I698227d5769a2bfbfd22a64ea42906b1df9268d9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/171027
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Make methods children of their receiver's type symbol.
Add struct fields as children of the struct's type symbol.
Also identify numeric, boolean, and string types.
Updates golang/go#30915Fixesgolang/go#31202
Change-Id: I33c4ea7b953e981ea1e858505b77c7a3ba6ee399
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170198
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change will stop formatting from working on any file that does not
parse. This is a temporary fix to handle the formatting problems
mentioned here: https://github.com/Microsoft/vscode-go/issues/2410, but
is not a long-term solution.
Change-Id: Ie34b1876519832d6859db95fdcad7cc37a20b769
Reviewed-on: https://go-review.googlesource.com/c/tools/+/171019
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This also means we don't need the J2 becasue it is implied by len(Content)
Change-Id: I04e2cbaa3e1faa1e3add22ec2d478821b9062419
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170878
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
instead of driving the source pacakge directly, it indirects through the lsp
protocol (the same way check does)
We are normalizing on all the command lines doing this, so that server mode
is more viable in the future.
Change-Id: Ib5f2a059a44a5c60a53129c554e3cc14ca72c4a8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170577
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds a cache of undelivered diagnostics on the server-side.
If we fail to send a diagnostic once, we will retry the next time that
the server sends diagnostics.
Change-Id: I161dfad8ea1d2cfdcee933baed2d6872dc03b0c0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/167737
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Also use it for errors that were otherwise silently dropped
This makes it much easier to debug problems.
Also added command line control over whether the rpc trace messages are printed, which allows you to read the
log, otherwise the file edit messages swamp the log.
Change-Id: I7b70fd18034a87b2964e6d6d5f6f33dcaf7d8ea8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170178
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change also fixes the corresponding code in go/packages, which was
actually not filling in the TypesSizes if the bit was set.
Change-Id: I2d5a849045768a81c94218eb41da2faec26189a3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170010
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change allows us to return diagnostics in the case of a file that
doesn't exist.
Change-Id: I6275c0dc9103a3f44070919937afe27c64545828
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170009
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Instead of using a simple path map we now attempt to match files with
os.SameFile with fast paths for exact path matches. This should fix issues both
with symlinked directories (the mac tmp folder) and with case sensitivity
(windows)
Change-Id: I014dd01f89d08a348e7de7697cbc3a2512a6e5b3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/169699
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change uses go/types information to get the types for the
different symbols. It also groups the symbols according to their kinds,
though this doesn't seem to be reflected in the actual VSCode UI...
Updates golang/go#30915
Change-Id: I2caefe01f9834aaad6b9e81cd391d461405ef725
Reviewed-on: https://go-review.googlesource.com/c/tools/+/169438
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Change span to hide its fields and have validating accessors
This catches the cases where either the offset or the position is being used
when it was not set.
It also normalizes the forms as the API now controls them, and allows us to
simplify some of the logic.
The converters are now allowed to return an error, which lets us cleanly
propagate bad cases.
The lsp was then converted to the new format, and also had some error checking
of its own added on the top.
All this allowed me to find and fix a few issues, most notably a case where the
wrong column mapper was being used during the conversion of definition results.
Change-Id: Iebdf8901e8269b28aaef60caf76574baa25c46d4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/167858
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This CL ensures that a "." inside a string literal will return an empty
completion list.
Fixesgolang/go#30477
Change-Id: I1442d0acab4c12a829047805f745c4729d69c208
Reviewed-on: https://go-review.googlesource.com/c/tools/+/167857
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
This change brings back handling for circular imports, which was removed
because I originally thought that go/packages would handle that.
However, since we are type-checking from source, we still end up having
to deal with that.
Additionally, we propagate the errors of type-checking to the
diagnostics so that the user can actually see some of the problems.
Change-Id: I0139bcaae461f1bcaf95706532bc5026f2430101
Reviewed-on: https://go-review.googlesource.com/c/tools/+/166882
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
We may encounter these nil pointer if go/packages cannot find the
package of the given file, for example, when the user creates a new file
or a new package.
Change-Id: I16993017243a56332dd9f7e0aaf3c1d57f20fc3a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/167462
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change adds a Package interface to the source package, which allows
us to reduce the information cached per-package (we don't use any of the
unnecessary fields in a *go/packages.Package).
This change also adds an analysis cache for each package, which is used
to cache the results of analyses to avoid recomputation.
Change-Id: I56c6b5ed51126c27f46731c87ac4eeacc63cb81a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/165750
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change adds an additional cache for type information, which here is
just a *packages.Package for each package. The metadata cache maintains
the import graph, which allows us to easily determine when a package X
(and therefore any other package that imports X) should be invalidated.
Additionally, rather than performing content changes as they happen, we
queue up content changes and apply them the next time that any type
information is requested.
Updates golang/go#30309
Change-Id: Iaf569f641f84ce69b0c0d5bdabbaa85635eeb8bf
Reviewed-on: https://go-review.googlesource.com/c/tools/+/165438
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Also, separate type-checking logic into its own file.
go/packages returns import cycle errors anyway, so we just return them instead.
Change-Id: I1f524cdf81e1f9655c1b0afd50dd2aeaa167bb2f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/165021
Reviewed-by: Michael Matloob <matloob@golang.org>
This change adds severity levels to source.Diagnostics, allowing us to
pass this information along to the LSP. This allows compiler errors to
show up in red, while vet results show up in green.
Change-Id: I2bc0b27ed6629f987c05affe00fdbe4b9bfb3b3e
Reviewed-on: https://go-review.googlesource.com/c/164299
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Because diagnostics computations happen in parallel, we were getting
concurrent map writes by keeping one cache.
Change-Id: Ifa5adffe14c509168c9f8c5cb012f3fcd3a32441
Reviewed-on: https://go-review.googlesource.com/c/163161
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Like the previous change to the FIle interface, we treat Read as if it were an
accessor, we remember the content part but not the error part, and we may fill
it in asynchronously, so this change makes it explicit.
In the future we should probably trap the error in the read and push it back
through another channel though, it will be the root cause of later errors.
Change-Id: I3d374dd557178b4e8c5544813cd77f5c0faefe5b
Reviewed-on: https://go-review.googlesource.com/c/162403
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
we don't really use them, only generate them in cases where the failure is way more fundamental, and then also fail
to remember them for the next call to the same accessor. Better to not have them.
Change-Id: I0e8abeda688f5cc2a932ed95a80d89225c399f93
Reviewed-on: https://go-review.googlesource.com/c/162399
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Small changes to handle the last line in the diff library, LSP tests,
and diff to text edits conversion.
Fixesgolang/go#30137
Change-Id: Iff0e53a04c2dabf6f54eb7c738b4c0837f16efba
Reviewed-on: https://go-review.googlesource.com/c/162217
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This changes the analysis code from that which was in unitchecker.go
to that in checker.go, so we can run actions that get facts for dependencies
concurrently.
Adds the rest of the traditional vet suite to the LSP.
TODO(matloob): test that facts are actually propagated between packages
Change-Id: I946082159777943af81bcf10e503fecc99da521e
Reviewed-on: https://go-review.googlesource.com/c/161671
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change moves gopls from type-checking packages using the
go/packages API to type-checking from source. This is the first step in
adding caching to gopls.
Change-Id: I2a7dcfd8c9c0bfc6c35c86eadcdc6f9ce53d9be7
Reviewed-on: https://go-review.googlesource.com/c/161497
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This starts hooking up the analysis framework into the LSP. It runs
the Tests analysis (which I think might be the only one that doesn't
need facts or results) and reports its diagnostics if there are
no parse or typecheck failures.
Next step: figure out how to pass through results.
Change-Id: I21702d1cf5d54da399df54437f556b9351caa864
Reviewed-on: https://go-review.googlesource.com/c/161358
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Rather than replacing the whole file on gofmt or goimports, use the Myers
diff algorithm to compute diffs for a file. We send those back as text
edits.
Change-Id: I4f8cce5b27d51eae1911049ea002558a84cdf1bf
Reviewed-on: https://go-review.googlesource.com/c/158579
Reviewed-by: Ian Cottrell <iancottrell@google.com>
The source package now exposes an Identifier method that returns information
about an identifier, which can be used to implement Definition, TypeDefinition
and Hover, as well as other command line functions in a later cl.
Change-Id: I03629c2c940215b4e2c86ee45bee8a18b79ee0e1
Reviewed-on: https://go-review.googlesource.com/c/159337
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The previous change (https://go-review.googlesource.com/c/tools/+/157678) only stopped completion in comments in global scope. This change prevents completions results from being sent for comments inside of functions.
Fixesgolang/go#29370
Change-Id: I2b43ae2942c6ce7376d2a5f88c40e6ac45c2b773
GitHub-Last-Rev: bc4aac1370aa5758941cdfae63290f061a55e204
GitHub-Pull-Request: golang/tools#71
Reviewed-on: https://go-review.googlesource.com/c/158538
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Jumping to the definition of a builtin function or basic kind would
cause a nil pointer because these have no position.
Change-Id: I043a61a148757b127ff1123c8429ce23858bd13a
Reviewed-on: https://go-review.googlesource.com/c/157597
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Refactor code as a follow-up to
https://go-review.googlesource.com/c/tools/+/154742.
Also, change every instance of "source.URI()" to "fromProtocolURI", so
that we can add a better implementation of that later on (for Windows
support).
Change-Id: Ifa24ffd7e1aebf1f7d05df6f65742769ead0922f
Reviewed-on: https://go-review.googlesource.com/c/154741
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Added a View interface to the source package, which allows for reading
of other files (in the same package or in other packages). We were
already reading files in jump to definition (to handle the lack of
column information in export data), but now we can also read files in
diagnostics, which allows us to determine the end of an identifier so
that we can report ranges in diagnostic messages.
Updates golang/go#29150
Change-Id: I7958d860dea8f41f2df88a467b5e2946bba4d1c5
Reviewed-on: https://go-review.googlesource.com/c/154742
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change adds support for goimports as a code action that can be run
on save. However, there do appear to be issues with the propagation of
the context.Only field of the CodeActionParams, so we treat every
codeAction as an organizeImports action - this should be fixed in the
next vscode-languageclient release
(https://github.com/Microsoft/vscode-languageserver-node/issues/442).
Change-Id: I64ca0034c393762248fde6521aba86ed9d41bf70
Reviewed-on: https://go-review.googlesource.com/c/154338
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Create helper functions for the exported URI functions to test
the logic that isn't OS-specific (filepath.{To,From}Slash is the OS-specific part).
Also add helpers to determine is a file or URI path is Windows-specific.
Change-Id: I6ba5119424ad5edcd59b946276e4268b2525505f
Reviewed-on: https://go-review.googlesource.com/c/153867
Reviewed-by: Ian Cottrell <iancottrell@google.com>
URI should be started with file:/// always.
Change-Id: I123e577d421de3e85dfec00596fbdb63c2231938
Reviewed-on: https://go-review.googlesource.com/c/153618
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change separates a cache package out of the
golang.org/x/tools/internal/lsp/source package. The source package now
uses an interface instead a File struct, which will allow it be reused
more easily. The cache package contains the View and File structs now.
Change-Id: Ia2114e9dafc5214c8b21bceba3adae1c36b9799d
Reviewed-on: https://go-review.googlesource.com/c/152798
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change adds a very simple implementation of hovering. It doesn't
show any documentation, just the object string for the given object.
Also, this change sets the prefix for composite literals, making sure we
don't insert duplicate text.
Change-Id: Ib706ec821a9e459a6c61c10f5dd28d1798944fa3
Reviewed-on: https://go-review.googlesource.com/c/152599
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
The LSP specification doesn't have a Score field, so we must provide
sortText to the protocol in order to maintain the correct order.
Change-Id: I075849f520c21a0465dfb2060c598d8bae5f876b
Reviewed-on: https://go-review.googlesource.com/c/151237
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Also, trigger signature help on completion of a function (the "(" as a
trigger character doesn't work if it's part of a completion).
Change-Id: I952cb875fa72a741d7952178f85e20f9efa3ebff
Reviewed-on: https://go-review.googlesource.com/c/150638
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
It is impossible to reconstruct a line and column correctly from export data, so
we have to attempt to find open and process the file in order to guess what the
original pos was when we have one that originated in export data.
This occurs in any time in go to definition when the target is not in the same
pacakge as the source.
Change-Id: Ib2ee404d4f1c39d8bd7f1fbc2096d8d6cbeed6f8
Reviewed-on: https://go-review.googlesource.com/c/150044
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The go/format.Node function fails silently on malformed ASTs, even
though it writes out an invalid tree containing the strings "BadExpr"
and "BadStmt". We fix this by checking for *ast.Bad{Expr,Decl,Stmt}
before running the function. Ultimately, this should be fixed upstream
and just return an error from format.Node.
Change-Id: I2ba25551f0e97c0321d8e757de67360af44044d7
Reviewed-on: https://go-review.googlesource.com/c/149613
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change allows it to jump to the type if you are directly on the
embedded field when you trigger go to definition.
Change-Id: I48825a5a683e69c0714978c76b1d188d40b38c5d
Reviewed-on: https://go-review.googlesource.com/c/149615
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This happens whenever we load standard library information from export
data, and prevents the editor from understanding the file names
Change-Id: If5c04176a3e669ba396f322275993616e51ec097
Reviewed-on: https://go-review.googlesource.com/c/149612
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Add SignatureHelp functionality to source package. Tests will be added
in a subsequent change.
Change-Id: Ia43280946d96a984c5741273a00c12255d637b2a
Reviewed-on: https://go-review.googlesource.com/c/149177
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
x/tools only supports Go 1.10 and Go 1.11, but it's such a simple fix to
support 1.9, so change from strings.Builder to bytes.Buffer.
Change-Id: Ie37d6c7da7ce7dbbd4e9ec933e1eff3304142a59
Reviewed-on: https://go-review.googlesource.com/c/149178
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This makes the format code use the AST that is already cached on the file to do
the formatting. It also moves the core format code into the source directory.
Change-Id: Iaa79169708e92525cce326ea094ab98144fe1011
Reviewed-on: https://go-review.googlesource.com/c/148198
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Use the packagestest framework to test completion. Add support for a
slice of token.Position to packagestest to support this.
Change-Id: Ie5ddece4446a3c74419727461a77faa3788cb040
Reviewed-on: https://go-review.googlesource.com/c/148197
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
The completion function belongs in internal/lsp/source, so move it
there. Some small refactoring of completion, by moving each type of
completion into helper functions that append to the list of results.
Change-Id: I8599092906609591d499183657fe2d21d1f74df1
Reviewed-on: https://go-review.googlesource.com/c/148397
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This enables go to definition for the lsp.
It has one known non working case (where the filenames have $GOROOT in them)
Change-Id: I142c6e04b8691c5076dfcd55592ea710b4b361a4
Reviewed-on: https://go-review.googlesource.com/c/148158
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
I realized this was a mistake, we should try to keep the source
directory independent of the LSP protocol itself, and adapt in
the outer layer.
This will keep us honest about capabilities, let us add the
caching and conversion layers easily, and also allow for a future
where we expose the source directory as a supported API for other
tools.
The outer lsp package then becomes the adapter from the core
features to the specifics of the LSP protocol.
Change-Id: I68fd089f1b9f2fd38decc1cbc13c6f0f86157b94
Reviewed-on: https://go-review.googlesource.com/c/148157
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Add an autocompletion implementation to the LSP. Also, add a function
that type-checks a package at a certain position, returning an *ast.File
and token.Pos for querying completion.
Change-Id: I288d4e6ed168e6014e79a4436f31f5b4a99b7139
Reviewed-on: https://go-review.googlesource.com/c/147657
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
A file is strongly associated with a view, and knows how to manage it's own
contents.
We can also now track files that are not "active"
Change-Id: Ib9474cd40e5caa3db6596548612a9f90168b8a19
Reviewed-on: https://go-review.googlesource.com/c/147204
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This allows us to write the lsp verbs in terms of a stable underlying source
management layer.
This should make it easier to refactor the underlying layer to add more powerful
caching and incremental modes as we go.
Change-Id: Iab97b061d80394a6fa6748a93a4c68f2deb46129
Reviewed-on: https://go-review.googlesource.com/c/147201
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
