Just make it clearer that the performance gains are for the switch
statement itself, not the whole program.
Change-Id: I2d1bf2888f61112af3dc37113e740b00b092e2cc
Reviewed-on: https://go-review.googlesource.com/c/go/+/406874
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
The types of embedded fields must be named, but they don't
need to be defined types (e.g. if the type name is an alias).
Fixes#41687.
Change-Id: Ib9de65dfab0e23c27d8303875fa45c217aa03331
Reviewed-on: https://go-review.googlesource.com/c/go/+/406054
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
The metasyntax used in the spec is exactly the Wirth Syntax
Notation (WSN), which eventually influenced EBNF. Add a link
but keep mentioning EBNF which is likely more commonly known.
Use the original terms in the productions. Specifically, use
the words "Term" and "Factor" rather than "Alternative" and
"Term".
The terminology cleanup also resolves an inconsistency in the
subsequent prose which is referring to the correct "terms" now.
While at it, add a production for the entire Syntax itself,
matching the original WSN definition.
Also, replace the two uses of "grammar" with "syntax" for
consistency ("syntax" is the prevalent term used throughout
the spec).
Fixes#50074.
Change-Id: If770d5f32f56f509f85893782c1dafbb0eb29b2e
Reviewed-on: https://go-review.googlesource.com/c/go/+/405814
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
- refer to character "categories" rather than "classes" per the
definitions in the Unicode standard
- use "uppercase", "lowercase" (one word) instead of "upper case"
or "upper-case", matching the spelling in the Unicode standard
- clarify that that the blank character "_" is considered a lowercase
letter for Go's purposes (export of identifiers)
Fixes#44715.
Change-Id: I54ef177d26c6c56624662fcdd6d1da60b9bb8d02
Reviewed-on: https://go-review.googlesource.com/c/go/+/405758
Reviewed-by: Robert Griesemer <gri@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Fixes#45652.
Change-Id: I5e1434480c12815369a6ce204f3729eb63139125
Reviewed-on: https://go-review.googlesource.com/c/go/+/405757
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Taking into account the discussion and relevant feedback on a
change proposed in 2013 (see e-mail thread mentioned in issue).
Fixes#48864.
Change-Id: I811d518b7cbdf6b815695174f1da3d4251f491c3
Reviewed-on: https://go-review.googlesource.com/c/go/+/405756
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Fixes#52628.
Change-Id: If4261abc25868d62f7689253d40f872692c23a4d
Reviewed-on: https://go-review.googlesource.com/c/go/+/405755
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Change scope rules per the accepted proposal #52038.
Match prose for type parameters of type declarations.
Fixing the implementation is tracked by #51503.
Fixes#52038.
For #51503.
Change-Id: Iebd88a82c896b7b2e8520cd514ef6a2cc903e807
Reviewed-on: https://go-review.googlesource.com/c/go/+/405754
Reviewed-by: Robert Griesemer <gri@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Change-Id: I0ab34f2f931e0e712218e4eb086f4535cc17775c
Reviewed-on: https://go-review.googlesource.com/c/go/+/405614
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Be explicit that we always mean non-interface types when we
talk about sets of types.
Also, clarify that the quantification "all non-interface types"
means all such types in all possible programs, not just the
current program.
Per suggestion from Philip Wadler.
Change-Id: Ibc7b5823164e547bfcee85d4e523e58c7c27ac8a
Reviewed-on: https://go-review.googlesource.com/c/go/+/398655
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Even though the change in the behavior of 'runtime.GOROOT' was
not actually due to a change in the runtime package proper, I
suspect that users who notice it will look for the release note
in that section, not the 'cmd/go' section.
Fixes#51461.
Change-Id: I271752968d4152a7fdf3e170537e3072bf87ce86
Reviewed-on: https://go-review.googlesource.com/c/go/+/400814
Reviewed-by: Ian Lance Taylor <iant@google.com>
They were swapped.
Fixes#52205
Change-Id: Iea2626aa2204f3bc96d08c571a1aa669436a32ad
Reviewed-on: https://go-review.googlesource.com/c/go/+/398895
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
This reverts a behavior change introduced in Go 1.18 (commit 9f69a443;
CL 340049). In Go 1.17 and earlier, draw.Draw(etc, draw.Src) with
image.NRGBA dst and src images would pass through a (heap allocated)
color.Color interface value holding a color.NRGBA concrete value.
Threading that color.NRGBA value all the way through preserves
non-premultiplied alpha transparency information (distinguishing e.g.
transparent blue from transparent red).
CL 340049 optimized out that heap allocation (per pixel), calling new
SetRGBA64At and RGBA64At methods instead. However, these methods (like
the existing image/color Color.RGBA method) work in premultiplied alpha,
so any distinction between transparent colors is lost.
This commit re-introduces the preservation of distinct transparencies,
when dst and src are both *image.NRGBA (or both *image.NRGBA64) and the
op is draw.Src.
Fixes#51893
Change-Id: Id9c64bfeeaecc458586f169f50b99d6c8aa52a7f
Reviewed-on: https://go-review.googlesource.com/c/go/+/396795
Trust: Nigel Tao <nigeltao@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
In the Type identity section, the example provides various types as givens.
The example refers to the type *T5, but it is not provided in the givens.
I am assuming this was a typo, and was meant to refer to *A1 or *B1.
*B1 seems to be in alignment with the rest of the provided examples.
Change-Id: I554319ee8bca185c3643559321417e8b2a544ba0
GitHub-Last-Rev: e80560d32a
GitHub-Pull-Request: golang/go#52143
Reviewed-on: https://go-review.googlesource.com/c/go/+/398075
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Ian Lance Taylor <iant@golang.org>
Change timeouts to be Is(context.DeadlineExceeded) and cancelation to
be Is(context.Canceled).
Fixes#51428
Change-Id: Ic580bd9da0f338e993fb79138875a78d99cc1a1d
Reviewed-on: https://go-review.googlesource.com/c/go/+/396877
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Octal values over 255, like \400 or \777, are illegal. It wasn't clear if the expected behavior was a compile error, encoding the value as two characters, or if the value would be capped at 255.
This example explicitly shows that octal values over 255 are illegal.
Change-Id: I45d94680107029c5f083e5d434e6270cc5b258c1
GitHub-Last-Rev: f6bef0379f
GitHub-Pull-Request: golang/go#52111
Reviewed-on: https://go-review.googlesource.com/c/go/+/397555
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
\u007f is not wrong but it's weird to use \u when we could use the
shorter \x.
Fixes#52062
Change-Id: Ica4bdc2463128051876f44e15297ed1e9edf1de8
Reviewed-on: https://go-review.googlesource.com/c/go/+/397255
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Be clear that the type of a term (not the term itself, which may
be of the form ~P) cannot be a type parameter.
For #50420.
Change-Id: I388d57be0618393d7ebe2c74ec04c1ebe3f33f7d
Reviewed-on: https://go-review.googlesource.com/c/go/+/396915
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
For #51572
Change-Id: Ib27be79379c8b3f72e29365b58067d7ee1919e52
Reviewed-on: https://go-review.googlesource.com/c/go/+/396295
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
- Allow for a type parameter as length/capacity to make.
- Be slightly more precise in prose for append.
- Add a couple of links.
Change-Id: Ib97e528bab1ab55d271beeeb53d9bb7a07047b9b
Reviewed-on: https://go-review.googlesource.com/c/go/+/391754
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
- Remove "Draft" disclaimer. We're not done but the spec
is in usable shape with respect to generics features.
- Remove section on "Earlier version" and fold information
into the "Intro" section.
- Remove caveat for shifts: the rules for arithmetic operators
on type parameters apply for them as well.
- Simply state that we don't support arguments of type parameter
type for the built-ins real, imag, and complex.
Fixes#51182.
Change-Id: I6df1427de685cfe7055b64e91753aa7ebff70565
Reviewed-on: https://go-review.googlesource.com/c/go/+/391695
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
- Change section title from "Type parameters lists" to
"Type parameter declarations" as the enclosing section
is about declarations.
- Correct section on parsing ambiguity in type parameter
lists.
- Rephrase paragraphs on type parameters for method receivers
and adjust examples.
- Remove duplicate prose in section on function argument type
inference.
- Clarified "after substitution" column in Instantiations section.
Change-Id: Id76be9804ad96a3f1221e5c4942552dde015dfcb
Reviewed-on: https://go-review.googlesource.com/c/go/+/390994
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Specific types were introduced to explain rules for operands of
type parameter type. Specific types are really an implementation
mechanism to represent (possibly infinite) type sets in the machine;
they are not needed in the specification.
A specific type is either standing for a single named or unnamed
type, or it is the underlying (unnamed) type of an infinite set of
types. Each rule that applies to a type T of the set of specific
types must also apply to all types T' in the type set for which T
is a representative of. Thus, in the spec we can simply refer to
the type set directly, infinite or not.
Rather then excluding operands with empty type sets in each instance,
leave unspecified what happens when such an operand is used. Instead
give an implementation some leeway with an implementation restriction.
(The implementation restriction also needs to be formulated for types,
such as in conversions, which technically are not "operands". Left for
another CL.)
Minor: Remove the two uses of the word "concrete" to refer to non-
interface types; instead just say "non-interface type" for clarity.
Change-Id: I67ac89a640c995369c9d421a03820a0c0435835a
Reviewed-on: https://go-review.googlesource.com/c/go/+/390694
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Type inference for types was always a "nice to have" feature.
Given the under-appreciated complexity of making it work in all
cases, and the fact that we don't have a good understanding of
how it might affect readability of generic code, require explicit
type arguments for generic types.
This matches the current implementation.
Change-Id: Ie7ff6293d3fbea92ddc54c46285a4cabece7fe01
Reviewed-on: https://go-review.googlesource.com/c/go/+/390577
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This change includes several smaller changes based on feedback
received so far.
These changes were reviewed at CL 385536. The only additional
change here is to the current date in the subtitle.
Change-Id: I653eb4a143e3b86c5357a2fd3b19168419c9f432
Reviewed-on: https://go-review.googlesource.com/c/go/+/390634
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For #51153
Change-Id: I4374c63498b62ba7a08f146eebd034cbd50623f6
Reviewed-on: https://go-review.googlesource.com/c/go/+/389634
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
This template is based on CL 342070 and previous ones like it.
Continue to eagerly include often-used sections, and clarify that
the TODO is about completing the section, or removing if it turns
out not to be needed.
Move the Go 1.18 release notes to x/website, since that's the new
home for past Go release notes as of CL 291711. They're added to
x/website in CL 388556.
For #51400
Updates #47694
Change-Id: I7b5213e039ad6e14a7ff7ad486311efcecc06824
Reviewed-on: https://go-review.googlesource.com/c/go/+/388515
Trust: Carlos Amedee <carlos@golang.org>
Run-TryBot: Carlos Amedee <carlos@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Alex Rakoczy <alex@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
The Go 1 compatibility guarantee permits us to break code if there is
a specification error or a bug. Emphasize that for generics.
Change-Id: I8379a14cdab9f63bb747e961ca12d1adecfc2eb4
Reviewed-on: https://go-review.googlesource.com/c/go/+/388454
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
For #45964
Change-Id: Ic66502c50ca328e944c91e710dca6c8dbc168e4f
Reviewed-on: https://go-review.googlesource.com/c/go/+/387855
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Matt Layher <mdlayher@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The tag was "go-mod-vendor", which doesn't match the content.
Also move that section later, so "go mod" sections stay together.
For #47694.
Change-Id: Id4fa7ee0768682a9aadfeb1b2f1d723e7521896b
Reviewed-on: https://go-review.googlesource.com/c/go/+/387354
Trust: Cherry Mui <cherryyz@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Updates #47694
Change-Id: I6c1c3698fdd55fe83c756f28776d1d26dba0a9df
Reviewed-on: https://go-review.googlesource.com/c/go/+/386974
Trust: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
sed 's/the/that/g'
Change-Id: I3f539817b055d54b0ec99346555ac91b756d9ed6
GitHub-Last-Rev: 2e7df1c346
GitHub-Pull-Request: golang/go#51267
Reviewed-on: https://go-review.googlesource.com/c/go/+/386854
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Dmitri Shuralyov <dmitshur@golang.org>
This change removes the -workfile flag and allows the go.work file path
to be set using GOWORK (which was previously read-only). This removes
the potential discrepancy and confusion between the flag and environment
variable.
GOWORK will still return the actual path of the go.work file found if it
is set to '' or 'auto'. GOWORK will return 'off' if it is set to 'off'.
For #45713Fixes#51171
Change-Id: I72eed65d47c63c81433f2b54158d514daeaa1ab3
Reviewed-on: https://go-review.googlesource.com/c/go/+/385995
Trust: Michael Matloob <matloob@golang.org>
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
The (temporary) highlights will make it easier to review the spec
in formatted form as opposed to html text.
Added a missing rule about the use of adjusted core types for
constraint type inference.
Adjusted rule for invalid embedding of interface types.
Change-Id: Ie573068d2307b66c937e803c486724175415b9c6
Reviewed-on: https://go-review.googlesource.com/c/go/+/385535
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change moves the relevant prose of the section on type parameters
into the section on type parameter lists and eliminates the former.
With this change, the section on types now exclusively describes all
Go composite types.
User-defined named types (defined types and type parameters) are
described with their declarations.
Change-Id: I3e421cd236e8801d31a4a81ff1e5ec9933e3ed20
Reviewed-on: https://go-review.googlesource.com/c/go/+/385037
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Also, fixed several closing header tags and removed a duplicate "the".
(Thanks to @hopehook and Hossein Zolfi for pointing these out.)
Change-Id: I85a40ba44b8570a578bce8d211dcc5ea3901fb1e
Reviewed-on: https://go-review.googlesource.com/c/go/+/385036
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The outcome of type inference depends critically on when function
argument type inference stops processing arguments. Describe this
and explain an example with some detail.
Also: In the section on the built-in function delete, refer to the
value rather than the type of the second argument, as it may be an
untyped constant.
Change-Id: Ice7fbb33f985afe082380b8d37eaf763238a3818
Reviewed-on: https://go-review.googlesource.com/c/go/+/385034
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I6de236442f213ab4b4f19ec881add4923d8bfd8d
Reviewed-on: https://go-review.googlesource.com/c/go/+/385054
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Kevin Burke <kevin@burke.dev>
A basic interface is a classical Go interface containing only
methods or embedding basic interfaces.
Use this to simplify rule about what interfaces may be used
where. The term "basic interface" will also be useful when
talking about various interfaces in general.
Fix rule restricting union terms: as it was written it also
excluded interface terms with non-empty method sets due to
embedded non-interface types with methods.
Split the large section on interfaces into three smaller
pieces by introducing section titles.
Change-Id: I142a4d5609eb48aaa0f7800b5b85c1d6c0703fcb
Reviewed-on: https://go-review.googlesource.com/c/go/+/384994
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This makes the prose easier to read while being just as precise.
Change-Id: Ie46c6c5042f419de9fdeb1c75bb72b5a40c37073
Reviewed-on: https://go-review.googlesource.com/c/go/+/384774
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
This change only shuffles sections for better organization; there
are no other changes except title and link adjustments.
Until now, the sections on underlying types and method sets were
immediately following the introduction of types. As it becomes
necessary to introduce the notion of a core type more centrally,
the natural place is immediately following the section on underlying
types. All together, these sections, immediately after the introduction
of types, would distract from purpose of the section on types, which
is to introduce the various types that Go offers.
The more natural place for the definition of underlying, core, and
specific types is the section on properties of types and values.
To accomplish this, the section on the structure of interfaces is
split into a section on core types and one on specific types, and
the various sections are reorganized appropriately.
The new organization of the section on types now simply introduces
all Go types as follows:
- boolean types
- numeric types
- string types
- array types
- slice types
- struct types
- pointer types
- function types
- interface types
- map types
- channel types
- type parameters
The new organization of the section on properties of types and values
is as follows:
- underlying types
- core types
- specific types
- type identity
- assignability
- representability
- method sets
Change-Id: I59e4d47571da9d4c89d47d777f5353fb1c5843e6
Reviewed-on: https://go-review.googlesource.com/c/go/+/384623
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Includes a few minor cosmetic changes.
Change-Id: I6c307d958b47d83671142688630ea7835168439f
Reviewed-on: https://go-review.googlesource.com/c/go/+/384622
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
These TODOs were originally removed in CL 368794.
Updates #47694
Change-Id: I39d5c0ce5f96adbbc466585a5831f721057dbed5
Reviewed-on: https://go-review.googlesource.com/c/go/+/384619
Trust: Carlos Amedee <carlos@golang.org>
Run-TryBot: Carlos Amedee <carlos@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Fixes#51110.
Change-Id: I11370417f1ef435b05dfab18eeabc2c3c1b7b8a1
Reviewed-on: https://go-review.googlesource.com/c/go/+/384674
Trust: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Add corresponding rules and a couple of examples.
Fixes#50202.
Change-Id: I4287b5e2d0fd29a0c871795e07f1bb529c9c6004
Reviewed-on: https://go-review.googlesource.com/c/go/+/384240
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change in terminology prevents potential confusion
that migth be caused by associating "structural type"
with "structural typing"; the two are not connected.
Also, adjusted introductory paragraph of section on
constraint type inference: type inference goes in both
directions, from type parameter to core type and vice
versa. The previous description was not quite accurate.
Change-Id: If4ca300f525eea660f68486302619aa6ad5dbc2c
Reviewed-on: https://go-review.googlesource.com/c/go/+/384238
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For #47694.
Change-Id: I5f6850e171f574a5342671778df854dc68a5148f
Reviewed-on: https://go-review.googlesource.com/c/go/+/384554
Trust: Carlos Amedee <carlos@golang.org>
Run-TryBot: Carlos Amedee <carlos@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Alex Rakoczy <alex@golang.org>
Trust: Alex Rakoczy <alex@golang.org>
Run-TryBot: Alex Rakoczy <alex@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
The terms "integer type", "floating-point type", and "complex type"
are used frequently in the spec but are not explicitly (only indirectly)
defined.
Slightly rephrased the section on numeric types and introduce these
terms explicitly. Add links to this section.
Change-Id: I3fb888933bece047da8b356b684c855618e9aee4
Reviewed-on: https://go-review.googlesource.com/c/go/+/384157
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I119cfb1a0da9af89ced78935b8fcdfdb8d9b4ab6
Reviewed-on: https://go-review.googlesource.com/c/go/+/383794
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
It has moved to golang.org/x/exp/constraints. Perhaps it will move
back to the standard library in a future release.
For golang/go#45458Fixesgolang/go#50792
Change-Id: I93aa251a7afe7b329a3d3faadc0c5d6388b1f0e9
Reviewed-on: https://go-review.googlesource.com/c/go/+/382460
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
For #47694.
For #50912.
For #50937.
Change-Id: I3fae6c8dbbd61a45e669b8fb0c18ac76f2183963
Reviewed-on: https://go-review.googlesource.com/c/go/+/381967
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: Ic338788d6410ed0d09ad129811377ee9ce5ed496
Reviewed-on: https://go-review.googlesource.com/c/go/+/367954
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This reverts CL 380854.
Per the conluding discussions on #50791. A follow-up will
document `comparable` more thoroughly.
For #50791.
Change-Id: I15db9051784a012f713e28d725c3b8bbfeb40569
Reviewed-on: https://go-review.googlesource.com/c/go/+/381076
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Mostly from CL 367954.
Change-Id: Id003b0f785a286a1a649e4d6e8c87d0418a36545
Reviewed-on: https://go-review.googlesource.com/c/go/+/379920
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This reverts CL 376414.
For #47694.
For #50481.
Change-Id: Ie73961046e52e6e5d3262ef0aeaa24bec7eaa937
Reviewed-on: https://go-review.googlesource.com/c/go/+/379835
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
It was removed in CL 378576.
For #50501
Change-Id: I26b8f0e99a40fa5c616aa4849a6ab15dd0d072f8
Reviewed-on: https://go-review.googlesource.com/c/go/+/379314
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Introduce a (local) notion of a set of representative types,
which serves as a representation/approximation of an
interface's actual type set. If the set of representative
types is is non-empty and finite, it corresponds to the set
of specific types of the interface.
In the implementation, the set of representative types serves
as a finite representation of an interface's type set, together
with the set of methods.
Change-Id: Ib4c6cd5e17b81197672e4247be9737dd2cb6b56f
Reviewed-on: https://go-review.googlesource.com/c/go/+/376834
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For #47694.
Change-Id: I00862f987a0ff9f71e0295ce4320e6f9a6a4332f
Reviewed-on: https://go-review.googlesource.com/c/go/+/376414
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Problem pointed out on golang-nuts mailing list.
Change-Id: If1c9b22e1ed7b4ec7ebcaadc80fa450333e6856c
Reviewed-on: https://go-review.googlesource.com/c/go/+/375799
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The release notes explicitly refer to sections updated
for generics in the spec but then point to the old spec
which is very confusing for beta users.
For #47694
Change-Id: I5b555db3543cc32f088a8b267ec3f1195a52a812
Reviewed-on: https://go-review.googlesource.com/c/go/+/373174
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The change clarifies in the release notes for go1.18 that the variable
is for compilation and references the microarchitecture description in
the Go Wiki,
https://golang.org/wiki/MinimumRequirements#amd64,
and references the same information in the output of go help
environment.
Fixes#50174
Change-Id: I6a7d5a06f48463a810c96cc9c76fe66113d5147c
Reviewed-on: https://go-review.googlesource.com/c/go/+/372194
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
For #47694
For #48052
Change-Id: I136be9b498033309d876099aae16bad330555416
Reviewed-on: https://go-review.googlesource.com/c/go/+/373774
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
For #47694
Sorry about that! I guess the autocompleter in VSCode auto-closed the paragraph and I didn't notice.
Change-Id: I1e834e47deb708cd5285d26201a442305f8c3b24
GitHub-Last-Rev: ab88731551
GitHub-Pull-Request: golang/go#50305
Reviewed-on: https://go-review.googlesource.com/c/go/+/374014
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Dmitri Shuralyov <dmitshur@golang.org>
For #47694
Change-Id: I9f4838100741d3ba13e9374e70466fa405c6e4d2
Reviewed-on: https://go-review.googlesource.com/c/go/+/372634
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
For #47694
Change-Id: I9af871a4a45b002e72629904011aac8f076617f1
Reviewed-on: https://go-review.googlesource.com/c/go/+/372974
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The new description matches the implementation (CL 370774).
Also, in the section on type constraints, use "defines" instead of
"determines" because the constraint interface defines the type set
which is precisely the set of acceptable type arguments.
For #49482.
Change-Id: I6f30f49100e8ba8bec0a0f1b450f88cae54312eb
Reviewed-on: https://go-review.googlesource.com/c/go/+/372874
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For #49602.
Change-Id: I0d3ff8f087dffb3409918494147fd1dceff7514d
Reviewed-on: https://go-review.googlesource.com/c/go/+/372694
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For #47694
Change-Id: Ibf38eabcb78abc563fcf77e2b566175a18c06fa3
Reviewed-on: https://go-review.googlesource.com/c/go/+/372114
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
In release notes for Go 1.18, fix typo in changes for package testing to
correctly document the change in CL 343883.
Change-Id: I40d92858ed3f74554a094466c06771f83dd81942
Reviewed-on: https://go-review.googlesource.com/c/go/+/371616
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Cherry Mui <cherryyz@google.com>
It is a new package and seems a major change.
Updates #47694.
Change-Id: If854e494e28bcd1e79c99e59119755b9cb6793d6
Reviewed-on: https://go-review.googlesource.com/c/go/+/371816
Trust: Cherry Mui <cherryyz@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
There doesn't seem anything that still needs to de done there.
Updates #47694.
Change-Id: I7909f566638332f3904d20a34f61d371af1d2da2
Reviewed-on: https://go-review.googlesource.com/c/go/+/371754
Trust: Cherry Mui <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Trust: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Alex Rakoczy <alex@golang.org>
As written, the conversion P(x), where P and the type
of x are type parameters with identical underlying types
(i.e., identical constraints), is valid. However, unless
the type of x and P are identical (which is covered with
the assignability rule), such a conversion is not valid
in general (consider the case where both type parameters
are different type parameters with constraint "any").
This change adjusts the rules to prohibit type parameters
in this case. The same reasoning applies and the analogue
change is made for pointer types.
The type checker already implements these updated rules.
Change-Id: Id90187900cb2820f6a0a0cf582cf26cdf8addbce
Reviewed-on: https://go-review.googlesource.com/c/go/+/371074
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
cmd/vet has several precision improvements for the checkers copylock, printf, sortslice, testinggoroutine, and tests. Adds a high level mention in the release notes and an example of string constant concatenation.
Updates #47694
Change-Id: I7a342a57ca3fd9e2f3e8ec99f7b647269798317f
Reviewed-on: https://go-review.googlesource.com/c/go/+/370734
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Trust: Tim King <taking@google.com>
Run-TryBot: Tim King <taking@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Also update some other go/types release notes to use the present tense.
Updates #47694
Change-Id: I654371c065e76fd5d22679d0d3c1a81bc3d1e513
Reviewed-on: https://go-review.googlesource.com/c/go/+/370235
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This CL reorders the bullet points in the generics section to more
closely match what I think users will consider most important. I put
the ~ token before the mention of ~T in interfaces to avoid a forward
reference, though I wonder if we actually want to spent a couple more
sentences saying what union and ~T types are, since most people are
going to care about that a lot more than they care about the low-level
detail that there's a new token.
For #47694.
Change-Id: Ib84f096ef6346a711801268ce362b64fa423d3f2
Reviewed-on: https://go-review.googlesource.com/c/go/+/369734
Trust: Austin Clements <austin@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
NewTypeList was not part of the go/types API proposal, and was left in
by accident. It also shouldn't be necessary, so remove it.
Updates #47916
Change-Id: I4db3ccf036ccfb708ecf2c176ea4921fe68089a4
Reviewed-on: https://go-review.googlesource.com/c/go/+/369475
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
For #47694
Change-Id: Iee4fda069a56ea4436b8aa32e2605f3349d7c154
Reviewed-on: https://go-review.googlesource.com/c/go/+/369334
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Also, move it up in the document.
Updates #47694
Change-Id: I927c4c845089a5c22e2c5b5f3de1831c04c6d990
Reviewed-on: https://go-review.googlesource.com/c/go/+/369102
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The number of involved CLs is too large (hundreds) so
no CLs are mentioned in (html) comments.
Updates #47694
Change-Id: I655d800a1e56a71e9d70a190f1c42c17baf6861e
Reviewed-on: https://go-review.googlesource.com/c/go/+/369099
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Also make a few small formatting fixes.
Change-Id: Iad99d030312393af3b6533f2cd00f09aea0f2a7d
Reviewed-on: https://go-review.googlesource.com/c/go/+/369074
Trust: Katie Hockman <katie@golang.org>
Run-TryBot: Katie Hockman <katie@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
For #44853
For #47694
Change-Id: Ia76246218b1361d8bdf510bbfc5178c83cdd3eec
Reviewed-on: https://go-review.googlesource.com/c/go/+/368834
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
This is based off Michael's notes.
Updates #47694
Change-Id: I6e7944f85b776e8481829a2fafd177a49557c6ca
Reviewed-on: https://go-review.googlesource.com/c/go/+/368156
Trust: Jeremy Faller <jeremy@golang.org>
Run-TryBot: Jeremy Faller <jeremy@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
This description is based on https://golang.org/cl/321490.
Updates #47694
Change-Id: I48656cd487d2fccf0b0d3390f350f1bc6f2b0080
Reviewed-on: https://go-review.googlesource.com/c/go/+/365738
Trust: Jeremy Faller <jeremy@golang.org>
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Run-TryBot: Jeremy Faller <jeremy@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Change-Id: I562d4648756e710020ee491f3801896563a89baa
Reviewed-on: https://go-review.googlesource.com/c/go/+/367395
Trust: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
We want to support some special cases for index expressions, len, and
cap on operands of type parameters (such as indexing a value constrained
by byte slices and strings), hence the extra rules.
Change-Id: I4a07dc7e64bb47361b021d606c52eae1784d5430
Reviewed-on: https://go-review.googlesource.com/c/go/+/366814
Trust: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
- fix definition of "specific types" and add more examples
- state that a parameterized function must be instantiated
when used as a function value
- remove duplicate word ("can can" -> "can")
Thanks to @danscales for finding these.
Change-Id: Ideb41efc35a3e67694d3bc97e462454feae37c44
Reviewed-on: https://go-review.googlesource.com/c/go/+/367394
Trust: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
For #47694.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Change-Id: I38c2fd9b57fbbacf220a2bc679f67e2dfdcc7cb1
Reviewed-on: https://go-review.googlesource.com/c/go/+/367514
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
This change corrects the link `Instantiantions` to `Instantiations` in the spec.
Change-Id: Ib0ed03420ae401d20af1ea723c5487018b2f462d
GitHub-Last-Rev: b84316c818
GitHub-Pull-Request: golang/go#49816
Reviewed-on: https://go-review.googlesource.com/c/go/+/367274
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Change-Id: I11111b3617673be94508128489aed6488d518537
Reviewed-on: https://go-review.googlesource.com/c/go/+/366834
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I5ffc7f26236487070447eaa0f6b14d1fab44c3c7
Reviewed-on: https://go-review.googlesource.com/c/go/+/366794
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I2770da87b4c977b51dfa046f2f08283917675e1c
Reviewed-on: https://go-review.googlesource.com/c/go/+/365916
Trust: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Change-Id: I7bfddf4be0d1d95419f312bb349ae2e16b74b795
Reviewed-on: https://go-review.googlesource.com/c/go/+/365915
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I3c4d8bdb5e92ee7fdca9593fb043f94f467755e8
Reviewed-on: https://go-review.googlesource.com/c/go/+/365434
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I4423a059527066c4418c195911f8184dfd3f5a15
Reviewed-on: https://go-review.googlesource.com/c/go/+/365914
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The notion of specific types will be used to define rules for
assignability, convertability, etc. when type parameters are
involved.
Change-Id: Ic5c134261e2a9fe05cdf25efd342f052458ab5c8
Reviewed-on: https://go-review.googlesource.com/c/go/+/366754
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Thanks to @danscales for noticing the mistake.
Change-Id: I547ee80a78419765b82d39d7b34dc8d3bf962c35
Reviewed-on: https://go-review.googlesource.com/c/go/+/366215
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Fixes#49214.
For #47694.
Change-Id: Iba68ed17bfd81890309b6a6732087f87a03e1350
Reviewed-on: https://go-review.googlesource.com/c/go/+/366274
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change introduces the notion of a structural interface
and its corresponding structural type.
Change-Id: Ib5442dfd04cb5950b4467428cae51849f8922272
Reviewed-on: https://go-review.googlesource.com/c/go/+/365474
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
- add section on type parameters
- added two sections on the scope of type parameters
- expanded general section on types accordingly
- introduced the notion of a named type which will
help in simplifying various rules (subsequent CLs)
Change-Id: I49c1ed7d6d4f951d751f0a3ca5dfb637e49829f2
Reviewed-on: https://go-review.googlesource.com/c/go/+/365414
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I29e9188a0fa1326c2755a9b86aeb47feaa8019be
Reviewed-on: https://go-review.googlesource.com/c/go/+/365274
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
- fixed a typo in the method set section
- express in the syntax that ~T denotes an underlying type
- be more precise when talking about types vs type terms
- refer to "unions" rather than "union expressions"
- make it clear in the spec title that this is WIP
Change-Id: I9b2c4b1f77bc50dd574ed6893bedd40529c320fc
Reviewed-on: https://go-review.googlesource.com/c/go/+/365154
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is the first of several CLs that update the existing
Go 1.17 spec for type parameters.
This CL updates the section on method sets and interface types.
It also adds "any", "comparable" to the list of predeclared
identifiers.
Change-Id: I0ce25dc02791c33150c0d949528512610faf3eab
Reviewed-on: https://go-review.googlesource.com/c/go/+/362999
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Also mention local types restriction.
We probably want to say more at some point, this is just a
placeholder to start.
Update #47631
Change-Id: I828e451e1e8504d21cb55c7132e9cb330b160a54
Reviewed-on: https://go-review.googlesource.com/c/go/+/364134
Trust: Keith Randall <khr@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
For #47694
Change-Id: I39594c273aeb038702457587ee1c46e4b3920bb6
Reviewed-on: https://go-review.googlesource.com/c/go/+/363359
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Trust: Jeremy Faller <jeremy@golang.org>
Thanks for jtagcat@ for finding this.
Change-Id: If7324808edbae19ec8bf503b04e0426f3fb3b47a
Reviewed-on: https://go-review.googlesource.com/c/go/+/363394
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This PR adds a note into the Go 1.18 changelog for CL 330852.
Updates #46923.
Change-Id: I99150e9275ce23fcf3697d6a22ac216818223c74
GitHub-Last-Rev: b2772ce68b
GitHub-Pull-Request: golang/go#49258
Reviewed-on: https://go-review.googlesource.com/c/go/+/360297
Trust: Roland Shoemaker <roland@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
For #47327
Change-Id: I50418c0d017c4e90a2c13d26945ee639079e4e33
Reviewed-on: https://go-review.googlesource.com/c/go/+/363174
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Paschalis Tsilias <paschalistsilias@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This will allow us to compare the changes made for Go 1.18.
Change-Id: I1456270b201967f5cb05e66cec556939e6e33265
Reviewed-on: https://go-review.googlesource.com/c/go/+/362894
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Updates #48367.
Change-Id: Ib8fc6d9dd7c3c6a70fefe077615f51a71d9c42ed
Reviewed-on: https://go-review.googlesource.com/c/go/+/361899
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Dmitri Shuralyov <dmitshur@golang.org>
A small touchup after CL 361894.
For #47694.
Change-Id: Ifc161516f897f727195d21351a3c8eda7b6e327e
Reviewed-on: https://go-review.googlesource.com/c/go/+/361895
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Carlos Amedee <carlos@golang.org>
For #47694.
Change-Id: Ia80a1859bd0fc6f08d27293f519c22fd9a804fd2
Reviewed-on: https://go-review.googlesource.com/c/go/+/361894
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Trust: Carlos Amedee <carlos@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
In modules that specify 'go 1.17' or higher, the go.mod file
explicitly requires modules for all packages transitively imported by
the main module. Users tend to use 'go mod download' to prepare for
testing the main module itself, so we should only download those
relevant modules.
In 'go 1.16' and earlier modules, we continue to download all modules
in the module graph (because we cannot in general tell which ones are
relevant without loading the full package import graph).
'go mod download all' continues to download every module in
'go list all', as it did before.
Fixes#44435
Change-Id: I3f286c0e2549d6688b3832ff116e6cd77a19401c
Reviewed-on: https://go-review.googlesource.com/c/go/+/357310
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
This reverts CL 359096.
Updates #47788.
Reason for revert: -buildmode=shared may have actually been working in a few very specific cases. We should not remove -buildmode=shared until we have implemented an alternative to support those few cases.
Change-Id: Ia962b06abacc11f6f29fc29d092773be175e32f1
Reviewed-on: https://go-review.googlesource.com/c/go/+/359575
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Change-Id: I032791a3cda1916099b0fd2955dcca4e69763660
Reviewed-on: https://go-review.googlesource.com/c/go/+/357958
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
It never worked in module mode (or with a read-only GOROOT).
A proposal to drop it was filed (and approved) in
https://golang.org/issue/47788.
Fixes#47788
Change-Id: I0c12f38eb0c5dfe9384fbdb49ed202301fa4273d
Reviewed-on: https://go-review.googlesource.com/c/go/+/359096
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Mention future versions will require the COMPAT_FREEBSD12 kernel option
set in the kernel.
For #47694.
Change-Id: Ia94c4f9dbb38c68025d3c1d12dd2e241a5480a6b
Reviewed-on: https://go-review.googlesource.com/c/go/+/354971
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
For #43684
Change-Id: I9ce47de82203ec87e7d3683f56e6c6d61ae255f5
Reviewed-on: https://go-review.googlesource.com/c/go/+/352151
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
gofmt is pretty heavily CPU-bound, since parsing and formatting 1MiB
of Go code takes much longer than reading that amount of bytes from
disk. However, parsing and manipulating a large Go source file is very
difficult to parallelize, so we continue to process each file in its
own goroutine.
A Go module may contain a large number of Go source files, so we need
to bound the amount of work in flight. However, because the
distribution of sizes for Go source files varies widely — from tiny
doc.go files containing a single package comment all the way up to
massive API wrappers generated by automated tools — the amount of
time, work, and memory overhead needed to process each file also
varies. To account for this variability, we limit the in-flight work
by bytes of input rather than by number of files. That allows us to
make progress on many small files while we wait for work on a handful
of large files to complete.
The gofmt tool has a well-defined output format on stdout, which was
previously deterministic. We keep it deterministic by printing the
results of each file in order, using a lazily-synchronized io.Writer
(loosly inspired by Haskell's IO monad). After a file has been
formatted in memory, we keep it in memory (again, limited by the
corresponding number of input bytes) until the output for all previous
files has been flushed. This adds a bit of latency compared to
emitting the output in nondeterministic order, but a little extra
latency seems worth the cost to preserve output stability.
This change is based on Daniel Martí's work in CL 284139, but using a
weighted semaphore and ephemeral goroutines instead of a worker pool
and batches. Benchmark results are similar, and I find the concurrency
in this approach a bit easier to reason about.
In the batching-based approach, the batch size allows us to "look
ahead" to find large files and start processing them early. To keep
the CPUs saturated and prevent stragglers, we would need to tune the
batch size to be about the same as the largest input files. If the
batch size is set too high, a large batch of small files could turn
into a straggler, but if the batch size is set too low, the largest
files in the data set won't be started early enough and we'll end up
with a large-file straggler.
One possible alternative would be to sort by file size instead of
batching: identify all of the files to be processed, sort from largest
to smallest, and then process the largest files first so that the
"tail" of processing covers the smallest files. However, that approach
would still fail to saturate available CPU when disk latency is high,
would require buffering an arbitrary amount of metadata in order to
sort by size, and (perhaps most importantly!) would not allow the
`gofmt` binary to preserve the same (deterministic) output order that
it has today.
In contrast, with a semaphore we can produce the same deterministic
output as ever using only one tuning parameter: the memory footprint,
expressed as a rough lower bound on the amount of RAM available per
thread. While we're below the memory limit, we can run arbitrarily
many disk operations arbitrarily far ahead, and process the results of
those operations whenever they become avaliable. Then it's up to the
kernel (not us) to schedule the disk operations for throughput and
latency, and it's up to the runtime (not us) to schedule the
goroutines so that they complete quickly.
In practice, even a modest assumption of a few megabytes per thread
seems to provide a nice speedup, and it should scale reasonably even
to machines with vastly different ratios of CPU to disk. (In practice,
I expect that most 'gofmt' invocations will work with files on at most
one physical disk, so the CPU:disk ratio should vary more-or-less
directly with the thread count, whereas the CPU:memory ratio is
more-or-less independent of thread count.)
name \ time/op baseline.txt 284139.txt simplified.txt
GofmtGorootCmd 11.9s ± 2% 2.7s ± 3% 2.8s ± 5%
name \ user-time/op baseline.txt 284139.txt simplified.txt
GofmtGorootCmd 13.5s ± 2% 14.4s ± 1% 14.7s ± 1%
name \ sys-time/op baseline.txt 284139.txt simplified.txt
GofmtGorootCmd 465ms ± 8% 229ms ±28% 232ms ±31%
name \ peak-RSS-bytes baseline.txt 284139.txt simplified.txt
GofmtGorootCmd 77.7MB ± 4% 162.2MB ±10% 192.9MB ±15%
For #43566
Change-Id: I4ba251eb4d188a3bd1901039086be57f0b341910
Reviewed-on: https://go-review.googlesource.com/c/go/+/317975
Trust: Bryan C. Mills <bcmills@google.com>
Trust: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Thanks to @bodar (Github) for finding this.
Fixes#48422.
Change-Id: I031c3d82a02db1d204e2b86b494d89784d37f073
Reviewed-on: https://go-review.googlesource.com/c/go/+/350409
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
CL 85215 added prose to provide some minimal intuition for the
definition of a "terminating statement". While the original definition
was perfectly fine, the added prose was actually incorrect: If the
terminating statement is a goto, it might jump to a labeled statement
following that goto in the same block (it could be the very next
statement), and thus a terminating statement does not in fact
"prevent execution of all statements that lexically appear after
it in the same block".
Rather than explaining the special case for gotos with targets that
are lexically following the goto in the same block, this CL opts for
a simpler approach.
Thanks to @3bodar (Github) for finding this.
Fixes#48323.
Change-Id: I8031346250341d038938a1ce6a75d3e687d32c37
Reviewed-on: https://go-review.googlesource.com/c/go/+/349172
Trust: Robert Griesemer <gri@golang.org>
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I33bde4835d3b83fafd55beea483f6236c4c62840
Reviewed-on: https://go-review.googlesource.com/c/go/+/338990
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Than McIntosh <thanm@google.com>
So it's clear to the reader that if "M" is a promoted method from
embedded field "T", then "x.M" will be expanded to "x.T.M" during the
evaluation of the method value.
Fixes#47863
Change-Id: Id3b82127a2054584b6842c487f6e15c3102dc9fe
Reviewed-on: https://go-review.googlesource.com/c/go/+/344209
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This CL adds a new syscall.SyscallN API.
The proposal discussion also suggests the API should not only for
Windows but other platforms. However, the existing API set already
contain differences between platforms, hence the CL only implements
the Windows platform.
Moreover, although the API offers variadic parameters, the permitted
parameters remains up to a limit, which is selected as 42, and arguably
large enough.
Fixes#46552
Change-Id: I66b49988a304d9fc178c7cd5de46d0b75e167a4f
Reviewed-on: https://go-review.googlesource.com/c/go/+/336550
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Trust: Matthew Dempsky <mdempsky@google.com>
Trust: Jason A. Donenfeld <Jason@zx2c4.com>
This template is based on CL 295209 and previous ones like it.
Continue to eagerly include often-used sections, and clarify that
the TODO is about completing the section, or removing if it turns
out not to be needed.
Move the Go 1.17 release notes to x/website, since that's the new
home for past Go release notes as of CL 291711. They're added to
x/website in CL 342089.
For #47694
Updates #44513
Change-Id: I24962eed800d1509bdf71b7d7f819a683eb96f8f
Reviewed-on: https://go-review.googlesource.com/c/go/+/342070
Trust: Carlos Amedee <carlos@golang.org>
Run-TryBot: Carlos Amedee <carlos@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
The current text is slightly inaccurate. Make it more correct.
Change-Id: Iebe0051b74649d13982d7eefe3697f9e69c9b75d
Reviewed-on: https://go-review.googlesource.com/c/go/+/340449
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Damien Neil <dneil@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Fixes#44513.
Change-Id: I82c44a681b1fa67df123af86ee02a980b13acdc8
Reviewed-on: https://go-review.googlesource.com/c/go/+/341673
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Trust: Carlos Amedee <carlos@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
Run-TryBot: Carlos Amedee <carlos@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
For #22446
Change-Id: I71a30761a28e81c50b7089d5a28be99c736c2dc8
Reviewed-on: https://go-review.googlesource.com/c/go/+/341332
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
The current document uses the "top" and "bottom" when talking
about the address within a frame, which may easily lead to
misunderstandings. This patch directly uses "high address"
and "low address" to make the expression clearer.
Change-Id: I7469330bbdc158672d7f0314fe6680ebdd9ab79a
Reviewed-on: https://go-review.googlesource.com/c/go/+/339369
Trust: fannie zhang <Fannie.Zhang@arm.com>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Writing CL 333629 clarified my thinking about the behavioral changes
associated with lazy loading. There are really two interrelated
changes — graph pruning, and lazy loading proper — that are both made
possible by the added redundancy in the go.mod file.
(I had initially approached the whole cluster of features as “lazy
loading” because that was the starting point for the design. Graph
pruning came into the picture when we looked at how to bound the
worst-case behavior of lazy loading, but it is really the more
important of the two aspects of the design.)
Note that this change adds links to doc anchors added in CL 333629.
Fixes#36460Fixes#47397
Change-Id: I0ef4af57f647bf5ee210ea7099191fb4befa2cc1
Reviewed-on: https://go-review.googlesource.com/c/go/+/335135
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
There is an example for nil slice already, so adding example for non-nil
zero length slice, too, clarifying to the reader that the result is also
non-nil and different from nil slice case.
Updates #395
Change-Id: I019db1b1a1c0c621161ecaaacab5a4d888764b1a
Reviewed-on: https://go-review.googlesource.com/c/go/+/336890
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Updates #44513
Change-Id: Ia0c6b48bde2719f3a99cb216b6166d82159198d1
Reviewed-on: https://go-review.googlesource.com/c/go/+/336930
Trust: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For #395
For #46746
Change-Id: I4bfc094cf1cecd27ce48e31f92384cf470f371a6
Reviewed-on: https://go-review.googlesource.com/c/go/+/334669
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
For #46229
Change-Id: I54d01d90f2b0c892d76121f1350c0e8cf4b2772f
Reviewed-on: https://go-review.googlesource.com/c/go/+/334729
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
For #19367
Change-Id: If0ff8ddba3b6b48e2e198cf3653e73284c7572a3
Reviewed-on: https://go-review.googlesource.com/c/go/+/332409
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
These types already implemented the Image interface. They should also
implement the RGBA64Image interface (new in Go 1.17)
Updates #44808
Change-Id: I9a2b13e305997088ae874efb95ad9e1648f94812
Reviewed-on: https://go-review.googlesource.com/c/go/+/331570
Trust: Nigel Tao <nigeltao@golang.org>
Run-TryBot: Nigel Tao <nigeltao@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Add unsafe.Add and unsafe.Slice to the list of built-in functions
which are not permitted in statement context. The compiler and
type checker already enforce this restriction, this just fixes
a documentation oversight.
For #19367.
For #40481.
Change-Id: Iabc63a8db048eaf40a5f5b5573fdf00b79d54119
Reviewed-on: https://go-review.googlesource.com/c/go/+/329925
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Rob Pike <r@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
For #46366
Change-Id: I8417e6e4dbb8cb56ff7afc16893a01b7bb938217
Reviewed-on: https://go-review.googlesource.com/c/go/+/329529
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Documents the mode added in CL 306149 to skip object resolution.
Fixes#46298
Change-Id: I6a14aaa00790f9f7e4e4ba17033355f5e878d74b
Reviewed-on: https://go-review.googlesource.com/c/go/+/329009
Trust: Robert Findley <rfindley@google.com>
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The new RGBA64At method is equivalent to the existing At method (and the
new SetRGBA64 method is equivalent to the existing Set method in the
image/draw package), but they can avoid allocations from converting
concrete color types to the color.Color interface type.
Also update api/go1.17.txt and doc/go1.17.html
Fixes#44808
Change-Id: I8671f3144512b1200fa373840ed6729a5d61bc35
Reviewed-on: https://go-review.googlesource.com/c/go/+/311129
Trust: Nigel Tao <nigeltao@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
"Results" may sound like the results from the previous sentence.
Reword to "function return values" for clarity.
Suggested by Tobias Kohlbau.
Change-Id: Ie78df36b5b191b06e98b802f9a46db6d067a8ea0
Reviewed-on: https://go-review.googlesource.com/c/go/+/327774
Trust: Cherry Mui <cherryyz@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Tobias Kohlbau <tobias@kohlbau.de>
Simplify and remove forward-compatibility reference, as OpenBSD 6.9 has
already been released (1st of May 2021).
Updates #44513
Change-Id: I0a1abbb397f31d15c80a970edaa9723f894cafa9
Reviewed-on: https://go-review.googlesource.com/c/go/+/327652
Trust: Joel Sing <joel@sing.id.au>
Reviewed-by: Cherry Mui <cherryyz@google.com>
It was the only h3 in <code>, and it lacked <p> around its content.
It looked like it was part of the prior section:
https://tip.golang.org/doc/go1.17#gofmt
Change-Id: I7e9ef70e9a03474225833f44420aabd70dab3cd5
Reviewed-on: https://go-review.googlesource.com/c/go/+/326774
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Trust: Brad Fitzpatrick <bradfitz@golang.org>
As far as I can tell the Core Library section is complete. Remove its
TODO.
Change-Id: Ia84c6656fac045e25fae1a7ce8b488a3a26fd250
Reviewed-on: https://go-review.googlesource.com/c/go/+/326469
Trust: Heschi Kreinick <heschi@google.com>
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Damien Neil <dneil@google.com>
In 1.17, //go:build lines are fully supported. This entails changes to
the go command, vet, and gofmt. Document all of them.
I'm not Russ, but this is a significant change, it slipped under the
radar, and we're trying to get the release out. So here's what I got.
I wasn't sure where to put the go command change. On the one hand,
it's pretty significant. On the other, it certainly affects fewer
people than lazy loading. So it probably shouldn't be first, but I also
didn't want to bury it the middle of all the other module changes. Open
to suggestions.
Change-Id: Ia1a96bcfb1977973c5b0b0a6b18a9242a745af12
Reviewed-on: https://go-review.googlesource.com/c/go/+/326209
Trust: Heschi Kreinick <heschi@google.com>
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
I'm not aware of anything more to mention for ports.
Change-Id: I686df8a230a55ad7f4c5eae43ca27f85fad9dd84
Reviewed-on: https://go-review.googlesource.com/c/go/+/326409
Trust: Cherry Mui <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
These vet checks were added in CL 299532 and CL 321389.
Also adds a TODO for buildtags.
Change-Id: I516dc77729f6d2dc147318260fe452831b115dfa
Reviewed-on: https://go-review.googlesource.com/c/go/+/322769
Trust: Tim King <taking@google.com>
Run-TryBot: Tim King <taking@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Re-apply the doc part of CL 324471, originally written by Felix Geisendörfer.
Change-Id: I831bead9a385bc5a5eed3058649a25ef17373bc6
Reviewed-on: https://go-review.googlesource.com/c/go/+/326171
Trust: Cherry Mui <cherryyz@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
This reverts CL 324471 (commit 689f4c7415).
Reason for revert: break ~all builders. And it is not a doc-only change.
Change-Id: Iadbdda34d2ca476a9f5e6c2d3a28592ed7ccb067
Reviewed-on: https://go-review.googlesource.com/c/go/+/326170
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
In both net.ParseIP and net.ParseCIDR reject leading zeros in the
dot-decimal notation of IPv4 addresses.
Fixes#30999Fixes#43389
Change-Id: I2b6a31fe84db89ac828cf5ed03eaa586ee96ab68
Reviewed-on: https://go-review.googlesource.com/c/go/+/325829
Trust: Roland Shoemaker <roland@golang.org>
Trust: Katie Hockman <katie@golang.org>
Run-TryBot: Roland Shoemaker <roland@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Reviewed-by: Katie Hockman <katie@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Fixes#46020.
Change-Id: Iadf9a0ac4a8863e17155d6ba1af2cc497634a634
Reviewed-on: https://go-review.googlesource.com/c/go/+/325870
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
The word "specifier" is used once only here and technically not defined.
Change-Id: Ifc9f0582f4eb3c3011ba60d8008234de511d4be6
Reviewed-on: https://go-review.googlesource.com/c/go/+/323730
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Ian Lance Taylor <iant@golang.org>
Trust: Robert Griesemer <gri@golang.org>
Replace "reserved word" by "keyword" as the latter is the official term.
Change-Id: I9f269759b872026034a9f47e4a761cff2d348ca0
Reviewed-on: https://go-review.googlesource.com/c/go/+/323729
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Ian Lance Taylor <iant@golang.org>
Trust: Robert Griesemer <gri@golang.org>
Documents the newly implemented changes of
- Time.IsDST() method
- Addition of Time.UnixMilli, Time.UnixMicro and to-Time helpers UnixMicro, UnixMilli methods
- Addition of comma "," support as separator for fraction seconds
For #44513Fixes#46026
Change-Id: Ib8d3449d3b061f013112d33362b50e68ad6ddffa
Reviewed-on: https://go-review.googlesource.com/c/go/+/317913
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Also delete the TODO for the linker section.
Updates #44513.
Updates #40724.
Change-Id: I4d62a907e8c3070831a052cdfe1e21648698df12
Reviewed-on: https://go-review.googlesource.com/c/go/+/323289
Trust: Cherry Mui <cherryyz@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Documents the newly added mode that skips type checking
functions as per CL 301493.
Fixes#46025
For #34652
For #44513
For #38627
Change-Id: I56c4f65924702a931944796e39f43cfeb66abc8a
Reviewed-on: https://go-review.googlesource.com/c/go/+/311569
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Trust: Michael Knyszek <mknyszek@google.com>
For #44513
Change-Id: I8c0070b116ee520a76726eb9d3dcbdd489a1fb1f
Reviewed-on: https://go-review.googlesource.com/c/go/+/323351
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
For #44513
Change-Id: Ib21af742e574fcaa7e38bb437d42dbeed9d01f0b
Reviewed-on: https://go-review.googlesource.com/c/go/+/323350
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
For #44513.
Fixes#46019.
Change-Id: Ica84edd5703a4ccf343ff01e10483f8d51d1c79f
Reviewed-on: https://go-review.googlesource.com/c/go/+/323069
Trust: Damien Neil <dneil@google.com>
Run-TryBot: Damien Neil <dneil@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes#46023
Change-Id: Ia63829d03afb0936862b16f0971175cbaa1095bc
Reviewed-on: https://go-review.googlesource.com/c/go/+/322890
Trust: Damien Neil <dneil@google.com>
Run-TryBot: Damien Neil <dneil@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For #44513.
Fixes#46013.
Change-Id: I382603208aa94b66d5220cf0f418b8528a4e4148
Reviewed-on: https://go-review.googlesource.com/c/go/+/322892
Trust: Damien Neil <dneil@google.com>
Run-TryBot: Damien Neil <dneil@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Also add a link to the time.Time type and adjust the wording a bit.
Change-Id: I2f4210ada6d253eb5804e6327b2432487beb8a05
Reviewed-on: https://go-review.googlesource.com/c/go/+/321811
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Changes include:
* ReadRequest function now returns an error when a request has multiple
Host headers.
For #44513.
Updates #46015.
Change-Id: I48ea7c5cee3f1d1a247035fd37191362a53d1f04
Reviewed-on: https://go-review.googlesource.com/c/go/+/317914
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Trust: Heschi Kreinick <heschi@google.com>
'go mod download' without arguments is frequently used to populate the
module cache. It tends to fetch a lot of extra files (for modules in
the build list that aren't needed to build packages in the main
module). It's annoying when sums are written for these extra files.
'go mod download mod@version' will still write sums for specific
modules in the build list. 'go mod download all' still has the
previous behavior.
For now, all invocations of 'go mod download' still update go.mod and
go.sum with changes needed to load the build list (1.15 behavior).
Fixes#45332
Change-Id: I9e17d18a7466ac7271a0e1a2b663f6b3cb168c97
Reviewed-on: https://go-review.googlesource.com/c/go/+/318629
Trust: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Documents the changes to File.WriteString method.
For #44513.
Fixes#46018.
Change-Id: I3a8ef9df9f84662614d54802710bd705d626b995
Reviewed-on: https://go-review.googlesource.com/c/go/+/317910
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Trust: Cherry Mui <cherryyz@google.com>
It was misplaced by the relnote tool.
Also add a TODO for CL 312212, per discussion in golang.org/issue/46020.
For #44513.
For #46020.
Change-Id: I8d766df969f85c351ead18df3e45adb6fb27b7a0
Reviewed-on: https://go-review.googlesource.com/c/go/+/317829
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
During the TLS handshake if the server doesn't support any of the
application protocols requested by the client, send the
no_application_protocol alert and abort the handshake on the server
side. This enforces the requirements of RFC 7301.
Change-Id: Iced2bb5c6efc607497de1c40ee3de9c2b393fa5d
Reviewed-on: https://go-review.googlesource.com/c/go/+/289209
Trust: Roland Shoemaker <roland@golang.org>
Trust: Katie Hockman <katie@golang.org>
Run-TryBot: Roland Shoemaker <roland@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
CL 317273 accidentally grouped a fix for bufio, bytes, strings
packages into a single entry, but they should be separate ones.
Fix that, and document these negative rune handling fixes.
The list of fixed functions in package unicode was computed by
taking the functions covered by the new TestNegativeRunes test,
and including those that fail when tested with Go 1.16.3.
For #44513.
Updates #43254.
Change-Id: I6f387327f83ae52543526dbdcdd0bb5775c678bd
Reviewed-on: https://go-review.googlesource.com/c/go/+/317469
Reviewed-by: David Benjamin <davidben@google.com>
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Trust: Alexander Rakoczy <alex@golang.org>
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Run-TryBot: Alexander Rakoczy <alex@golang.org>
For #44513.
For #23011.
Change-Id: Ic092e38da3601a43d7e2110f500db4a6a6f845f5
Reviewed-on: https://go-review.googlesource.com/c/go/+/316889
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
We were already setting GIT_SSH_COMMAND (if unset) to explicitly
include 'ControlMaster=no' in order to disable connection pooling.
Now we also set 'BatchMode=yes' to suppress password prompts for
password-protected keys.
While we're here, we also set GCM_INTERACTIVE=never to suppress
similar prompts from the Git Credential Manager for Windows.
Fixes#44904
Change-Id: Iebb050079ff7dd54d5b944c459ae212e9e6f2579
Reviewed-on: https://go-review.googlesource.com/c/go/+/300157
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Previously calling fmt.Sprintf("%#v", t) on a time.Time value would
yield a result like:
time.Time{wall:0x0, ext:63724924180, loc:(*time.Location)(nil)}
which does not compile when embedded in a Go program, and does not
tell you what value is represented at a glance.
This change adds a GoString method that returns much more legible
output:
"time.Date(2009, time.February, 5, 5, 0, 57, 12345600, time.UTC)"
which gives you more information about the time.Time and also can be
usefully embedded in a Go program without additional work.
Update Quote() to hex escape non-ASCII characters (copying logic
from strconv), which makes it safer to embed them in the output of
GoString().
Fixes#39034.
Change-Id: Ic985bafe4e556f64e82223c643f65143c9a45c3b
Reviewed-on: https://go-review.googlesource.com/c/go/+/267017
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Emmanuel Odeke <emmanuel@orijtech.com>
In order to prevent edit wars with previous cmd/go releases,
the new version annotations are only included if the main module
specifies 'go 1.17' or higher.
Fixes#36876
Change-Id: Iba15e47dd1ac2c16d754679a9b501db4069fa250
Reviewed-on: https://go-review.googlesource.com/c/go/+/315409
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
This change adds two possible upgrade paths for lazy loading:
1. Run 'go mod tidy -go=1.17'.
2. Starting in a module with no existing 'go' directive,
run any 'go' command that updates the go.mod file.
In the latter case, commands other than 'go mod tidy'
may leave the go.mod file *very* untidy if it had non-trivial
dependencies. (The 'go' invocation will promote all
implicit eager dependencies to explicit lazy ones,
which preserves the original module graph — most of which is
not actually relevant.)
'go mod tidy -go=1.17' can be used to enable lazy loading without
accidentally downgrading existing transitive dependencies.
'go mod tidy -go=1.16' can be used to disable lazy loading and clear
away redundant roots in a single step (if reducing the go version), or
to prune away dependencies of tests-of-external-tests (if increasing
the go version).
'go mod tidy -go=1.15' can be used to add dependencies of
tests-of-external-tests, although there isn't much point to that.
DO NOT MERGE
This change still needs an explicit test and a release note.
Fixes#45094
For #36460
Change-Id: I68f057e39489dfd6a667cd11dc1e320c1ee1aec1
Reviewed-on: https://go-review.googlesource.com/c/go/+/315210
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
This change activates the dormant “lazy loading” codepaths added in CL
265777 and its predecessors. Dependencies of modules that declare 'go
1.17' or higher are loaded lazily, and the dependencies in the go.mod
file maintain additional invariants to support more efficient lazy
loading for downstream dependent modules.
See https://golang.org/design/36460-lazy-module-loading for the
detailed design.
For #36460
Change-Id: Ic12ee7842aef9580357fcf8909d87654fcb2ad12
Reviewed-on: https://go-review.googlesource.com/c/go/+/314634
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
1. The existing prose implied that a switch expression type must
be comparable because it is tested for equality against all case
expressions. But for an empty switch (no case expressions), it
was not clear if the switch expression needed to be comparable.
Require it to match the behavior of compiler and type checkers.
2. While making this change, remove redundant language explaining
what happens with untyped boolean switch expression values: the
default type of an untyped boolean value is bool, this is already
covered by the first part of the relevant sentence.
Fixes#43200.
Change-Id: Id8e0f29cfa8722b57cd2b7b58cba85b58c5f842b
Reviewed-on: https://go-review.googlesource.com/c/go/+/314411
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Rob Pike <r@golang.org>
A non-trivial Cgo program may need to use callbacks and interact with
go objects per goroutine. Because of the rules for passing pointers
between Go and C, such a program needs to store handles to associated
Go values. This often causes much extra effort to figure out a way to
correctly deal with: 1) map collision; 2) identifying leaks and 3)
concurrency.
This CL implements a Handle representation in runtime/cgo package, and
related methods such as Value, Delete, etc. which allows Go users can
use a standard way to handle the above difficulties.
In addition, the CL allows a Go value to have multiple handles, and the
NewHandle always returns a different handle compare to the previously
returned handles. In comparison, CL 294670 implements a different
behavior of NewHandle that returns a unique handle when the Go value is
referring to the same object.
Benchmark:
name time/op
Handle/non-concurrent-16 487ns ± 1%
Handle/concurrent-16 674ns ± 1%
Fixes#37033
Change-Id: I0eadb9d44332fffef8fb567c745246a49dd6d4c1
Reviewed-on: https://go-review.googlesource.com/c/go/+/295369
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Cherry Zhang <cherryyz@google.com>
Then, write the 'go.mod' file with that version before further
processing. That way, if the command errors out due to a change in
behavior, the reason for the change in behavior will be visible in the
file diffs.
If the 'go.mod' file cannot be written (due to -mod=readonly or
-mod=vendor), assume Go 1.11 instead of the current Go release.
(cmd/go has added 'go' directives automatically, including in 'go mod
init', since Go 1.12.)
For #44976
Change-Id: If9d4af557366f134f40ce4c5638688ba3bab8380
Reviewed-on: https://go-review.googlesource.com/c/go/+/302051
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
In Go1.13 and above, signed integers are permitted as shift counts as long as they are >=0.
However, the comments in the "Arithmetic operators" section says shift operators accept "unsigned integer" as of right operands. Replacing this with "integer>=0" resolves the misunderstanding that shift
operators permit only unsigned integers.
Reference: Go1.13 Release Notes: https://golang.org/doc/go1.13
Change-Id: Icd3c7734d539ab702590e992a618c9251c653c37
GitHub-Last-Rev: 4f263a48d3
GitHub-Pull-Request: golang/go#44664
Reviewed-on: https://go-review.googlesource.com/c/go/+/297249
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
Trust: Robert Griesemer <gri@golang.org>
Adds the (*tls.Conn).HandshakeContext method. This allows
us to pass the context provided down the call stack to
eventually reach the tls.ClientHelloInfo and
tls.CertificateRequestInfo structs.
These contexts are exposed to the user as read-only via Context()
methods.
This allows users of (*tls.Config).GetCertificate and
(*tls.Config).GetClientCertificate to use the context for
request scoped parameters and cancellation.
Replace uses of (*tls.Conn).Handshake with (*tls.Conn).HandshakeContext
where appropriate, to propagate existing contexts.
Fixes#32406
Change-Id: I259939c744bdc9b805bf51a845a8bc462c042483
Reviewed-on: https://go-review.googlesource.com/c/go/+/295370
Run-TryBot: Johan Brandhorst-Satzkorn <johan.brandhorst@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Katie Hockman <katie@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Change-Id: I453d06da2f596eb0b99905aec46a05547d73c62c
Reviewed-on: https://go-review.googlesource.com/c/go/+/290872
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
Trust: Robert Griesemer <gri@golang.org>
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
This template is based on CL 248198 and previous ones like it.
Continue to eagerly include often-used sections, and clarify that
the TODO is about completing the section, or removing if it turns
out not to be needed.
Move the Go 1.16 release notes to x/website, since that's the new
home for past Go release notes as of CL 291711. They're added to
x/website in CL 295249.
'relnote -html' does not report any CLs with RELNOTE annotations
since 2021/02/01.
For #44513.
Updates #40700.
Change-Id: Idd389335500ec4dec2764cbbaa385918cc8a79ad
Reviewed-on: https://go-review.googlesource.com/c/go/+/295209
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
Updates #40700
Change-Id: Ifff622ccadaa31c0c0684c3c695aadcaa2305623
Reviewed-on: https://go-review.googlesource.com/c/go/+/294669
Trust: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The spec states that a type "may" have a method set associated with it.
Yet every type has a method set, which may be empty. This is clarified
later in the same paragraph. Be clear in the first sentence as well.
Per the suggestion from https://github.com/DQNEO.
Fixes#44318.
Change-Id: I6097b1c7062853e404b7fead56d18a7f9c576fc3
Reviewed-on: https://go-review.googlesource.com/c/go/+/292853
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes#40700.
Change-Id: I99ed479d1bb3cdf469c0209720c728276182a7a9
Reviewed-on: https://go-review.googlesource.com/c/go/+/291809
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
Trust: Alexander Rakoczy <alex@golang.org>
Run-TryBot: Alexander Rakoczy <alex@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
They have moved to x/website in CL 291693.
The docs that are left are the ones that are edited at the same time
as development in this repository and are tied to the specific version
of Go being developed. Those are:
- the language spec
- the memory model
- the assembler manual
- the current release's release notes
Change-Id: I437c4d33ada1b1716b1919c3c939c2cacf407e83
Reviewed-on: https://go-review.googlesource.com/c/go/+/291711
Trust: Russ Cox <rsc@golang.org>
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
These live in x/website/content/doc now.
The copies here just attract edits that have no actual effect.
For #40496.
For #41861.
Change-Id: I2fdd7375e373949eb9a88f4cdca440b6a5d45eea
Reviewed-on: https://go-review.googlesource.com/c/go/+/291709
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
For #43985
Change-Id: I1a16f66800c5c648703f0a0d2ad75024525a710f
Reviewed-on: https://go-review.googlesource.com/c/go/+/291389
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
A caller is not always in a function.
For example, a call can appear in top level declarations.
e.g. var x = f()
Change-Id: I29c4c3b7663249434fb2b8a6d0003267c77268cf
Reviewed-on: https://go-review.googlesource.com/c/go/+/290849
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Robert Griesemer <gri@golang.org>
This vet check was added in CL 243397.
For #40700.
Change-Id: Ibff6df9395d37bb2b84a791443578009f23af4fb
GitHub-Last-Rev: e47c38f630
GitHub-Pull-Request: golang/go#44147
Reviewed-on: https://go-review.googlesource.com/c/go/+/290330
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Add missed heading tag in CL 276373.
For #40700
Change-Id: Ida9e8861589bbc296a5a1cecbf9fe33fa09ed0ca
GitHub-Last-Rev: d218f8d4b7
GitHub-Pull-Request: golang/go#44111
Reviewed-on: https://go-review.googlesource.com/c/go/+/289869
Reviewed-by: Tim King <taking@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Trust: Tim King <taking@google.com>
Trust: Dmitri Shuralyov <dmitshur@golang.org>
The example, var v, ok T1 = x.(T), can be interpreted as type T1 interface{} or type T = bool; type T1 = T.
Separating the example would help understanding for readers.
Change-Id: I179f4564e67f4d503815d29307df2cebb50c82f9
GitHub-Last-Rev: b34fffb6bb
GitHub-Pull-Request: golang/go#44040
Reviewed-on: https://go-review.googlesource.com/c/go/+/288472
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Robert Griesemer <gri@golang.org>
For #40700
For #41184Fixes#43957
Change-Id: Ia346f4cf160431b721efeba7dc5f1fb8814efd95
Reviewed-on: https://go-review.googlesource.com/c/go/+/287472
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
A parenthesis of go list "-f" flag format is double curly braces.
Change-Id: Ifd38e0b0ae3c46272a4acd65584818228168b7c6
GitHub-Last-Rev: b46030492b
GitHub-Pull-Request: golang/go#43924
Reviewed-on: https://go-review.googlesource.com/c/go/+/286752
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Currently the only mention of go_asm.h is buried in a confusing
section about the runtime-specific go_tls.h header. We actually want
people to use go_asm.h, so this CL adds a section with a proper
discussion of this header. As part of this, we remove the discussion
of go_asm.h from the go_tls.h section and clean up what remains.
I stumbled on this when working on the internal ABI specification. I
wanted to refer to stable documentation on how to access struct fields
from assembly and found there was none.
Change-Id: I0d53741e7685e65794611939e76285f7c82e1d65
Reviewed-on: https://go-review.googlesource.com/c/go/+/286052
Trust: Austin Clements <austin@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
For #40700
Change-Id: If105d2f043539bb0893f577a984f14ee3e7ca753
Reviewed-on: https://go-review.googlesource.com/c/go/+/285212
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Rerank editor plugins based on popularity (Go 2019 survey), and remove
Atom, as it is no longer popular.
Change-Id: I06d39b67eec24a920439b9ea1198b6e2a939874e
Reviewed-on: https://go-review.googlesource.com/c/go/+/283073
Trust: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Proposal #40281 was initially accepted, but has now been declined.
This CL removes most of the work done to implement it.
Specifically this reverts CLs 248341, 274448, 274474, and 278392.
For #40281
For #43226
Change-Id: I5a9ebb4d9cb5fb0962434b64c59beb8343030be5
Reviewed-on: https://go-review.googlesource.com/c/go/+/281515
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
golang.org/cl/251878 disallowed non-ASCII characters in import paths,
in module mode. They were already disallowed in module paths, so this
change just extended the restriction to the package subdirectory of
the module. Update the release notes to alert users of this change.
Fixes#43052
Change-Id: I1caf9ef978dd3ac599a3f82c5c376ad62e6fc436
Reviewed-on: https://go-review.googlesource.com/c/go/+/282194
Trust: Michael Matloob <matloob@golang.org>
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
In general, we don't want to encourage reading them from CSRs, and
applications that really want to can parse the Extensions field.
Note that this also fixes a bug where the error of
parseKeyUsageExtension was not handled in parseCertificateRequest.
Fixes#43477
Updates #37172
Change-Id: Ia5707b0e23cecc0aed57e419a1ca25e26eea6bbe
Reviewed-on: https://go-review.googlesource.com/c/go/+/281235
Trust: Filippo Valsorda <filippo@golang.org>
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Roland Shoemaker <roland@golang.org>
What a year it has been. If there's one thing we can count on
at a time like this, it's that 2021 is the Year of the Gopher.
Change-Id: I4f6fbbe3d9b4b70df8fadd0d18237f05cd572265
Reviewed-on: https://go-review.googlesource.com/c/go/+/280163
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
A fix for a trivial (yet still confusing for neophytes like me!) typo in
contribute.html.
Change-Id: Ic68673fb2a3855c2b9e8042047087450e8793e6b
Reviewed-on: https://go-review.googlesource.com/c/go/+/279452
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
For #40700.
Change-Id: I67dd55b435304e428929c9a54b8881f9b78efdfb
Reviewed-on: https://go-review.googlesource.com/c/go/+/278392
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The path package doesn't have a Glob function. Adjust the release notes
re. CL 264397 accordingly.
Also add links to the documentation of all mentioned functions.
For #40700.
Change-Id: Ibf3e0530fa6fab36a3f6fbc664f0800869ce9ec7
Reviewed-on: https://go-review.googlesource.com/c/go/+/278213
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
For #40700.
Change-Id: I616429f82a44cea32701ed0af6e42ed6c71ee097
Reviewed-on: https://go-review.googlesource.com/c/go/+/277378
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Go 1.4 does not work on some systems, including the most
recent versions of macOS. Make it clearer that that's not the only
way to bootstrap Go.
Change-Id: I7c03d6808e43bf26283a53eab2bb0b2dc4af73af
Reviewed-on: https://go-review.googlesource.com/c/go/+/277216
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Also add -overlay to the Go 1.16 release notes.
For #40700Fixes#39958Fixes#42893
Change-Id: Ifd397549e368b255e7b8800986cfa0563a942af5
Reviewed-on: https://go-review.googlesource.com/c/go/+/274714
Trust: Michael Matloob <matloob@golang.org>
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
For #40700Fixes#42895
Change-Id: I05b60f0d000512d5dddb3d61e0e695aa01943d6a
Reviewed-on: https://go-review.googlesource.com/c/go/+/274617
Trust: Tim King <taking@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
The tools section TODO can be removed since the tools section looks
complete by now.
All TODOs in the minor changes to the library section have been done,
so the top-level TODO is resolved. Delete it.
The currently highlighted entries under Core library section look
good. It's worth reviewing this further based on feedback from Go
1.16 pre-releases, so keep the TODO but make it non-user-visible
to unblock Go 1.16 Beta 1.
For #40700.
Change-Id: Ie72661bd457b0a93ef92e1bfc0844072f3b618a6
Reviewed-on: https://go-review.googlesource.com/c/go/+/277212
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Based on text from Daniel Fava.
For #40700.
Change-Id: I0bc3a4340b8a777ff96d3cf226a7d51d3f65db2c
Reviewed-on: https://go-review.googlesource.com/c/go/+/275786
Trust: Austin Clements <austin@google.com>
Reviewed-by: Daniel Fava <danielsfava@gmail.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
For #40700
Change-Id: Idea442d45d18ca8cedc0b160df23eac6b86755ef
Reviewed-on: https://go-review.googlesource.com/c/go/+/275677
Trust: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
There are no language changes in Go 1.16, so document that.
For #40700.
Fixes#42976.
Change-Id: I80b0d2ce6cf550c00c0f026ee59ac9fbce6310be
Reviewed-on: https://go-review.googlesource.com/c/go/+/275117
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Sub provides a convenient way to refer to a subdirectory
automatically in future operations, like Unix's chdir(2).
The CL also includes updates to fstest to check Sub implementations.
As part of updating fstest, I changed the meaning of TestFS's
expected list to introduce a special case: if you list no expected files,
that means the FS must be empty. In general it's OK not to list all
the expected files, but if you list none, that's almost certainly a
mistake - if your FS were broken and empty, you wouldn't find out.
Making no expected files mean "must be empty" makes the mistake
less likely - if your file system ever worked, then your test will keep
it working.
That change found a testing bug: embedtest was making exactly
that mistake.
Fixes#42322.
Change-Id: I63fd4aa866b30061a0e51ca9a1927e576d6ec41e
Reviewed-on: https://go-review.googlesource.com/c/go/+/274856
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Go 1.16 will be the last to support macOS 10.12 Sierra.
Go 1.17 will require macOS 10.13 High Sierra.
For #23011.
Change-Id: I80052bdde4d9f1c5d71b67b85f65fb0b40856750
Reviewed-on: https://go-review.googlesource.com/c/go/+/275299
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For #40700
Change-Id: I0083db494284d6142e1b8b981fca4ac30af2012a
Reviewed-on: https://go-review.googlesource.com/c/go/+/275312
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Filippo Valsorda <filippo@golang.org>
This resolves all TODOs for the runtime and compiler and mentions
several other changes.
For #40700.
Fixes#42892.
Fixes#42894.
Change-Id: I18d14cfe572baf679ecf8b0a4e82c4b866da5a04
Reviewed-on: https://go-review.googlesource.com/c/go/+/275176
Trust: Austin Clements <austin@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This if follow up of CL 274332.
Updates #9399.
Change-Id: Ic6dd534dc18227a799cbb9577979f2285596b825
Reviewed-on: https://go-review.googlesource.com/c/go/+/274393
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This reverts commit 6af088bfc6.
Reason for revert: Broke many tests inside Google which implies many
tests were broken outside of Google as well. The tests may be brittle
but still would require work to change and it's not clear it's worth
the benefit.
Updates #36221Fixes#42675
Change-Id: Id3a14eb37e7119f5abe50e80dfbf120fdc44db72
Reviewed-on: https://go-review.googlesource.com/c/go/+/273747
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
Trust: Joe Tsai <thebrokentoaster@gmail.com>
For #40700Fixes#42912
Change-Id: Ifd36950136db1fc93a8de76a2717a473210418b1
Reviewed-on: https://go-review.googlesource.com/c/go/+/274473
Trust: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Added notes for:
* go test -c and -i flags used with unknown flags
* GO111MODULE=on by default
* GOVCS
* Dropped requirements on excluded versions
Removed TODOs for documentation on the retract directive and
'go install pkg@version'. These pages will be written after the beta.
Change-Id: Ic9877a62f908be177a6035a039b72e969e7b7f22
Reviewed-on: https://go-review.googlesource.com/c/go/+/274438
Trust: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Many of the standard library changes that were added before CL 272871
ended up in the "Core library" section. That section is meant for
major changes like new packages, and most of these aren't.
Consolidate all changes in the "Minor changes to the library" section
for now, so that it's easier to get a complete picture of changes for
each package, along with the remaining TODOs. Add a TODO to read them
over at the end and factor out items that are worth highlighting.
Apply minor other fixups to improve consistency.
For #40700.
Change-Id: I7dc2e7ebf2ea3385fce0c207bae4ce467998a717
Reviewed-on: https://go-review.googlesource.com/c/go/+/273267
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Katie Hockman <katie@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
For #40700
Change-Id: I056cef20a5f071977d0ae589c7a50d5f69af3283
Reviewed-on: https://go-review.googlesource.com/c/go/+/273166
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
The additions were generated using golang.org/x/build/cmd/relnote
at CL 272907. It was modified to find previously-missed entries
by querying the Gerrit API in addition to the maintner corpus.
For #40700.
Updates #41849.
Change-Id: If575984fe40e0133ad5e8fc5411ea5063457250d
Reviewed-on: https://go-review.googlesource.com/c/go/+/272871
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
Because we're expecting for future functions to be unavailable, we
should add an Unwrap() function to the DLLError struct, so that people
can test for this situation easily via:
if errors.Is(err, syscall.ERROR_PROC_NOT_FOUND) { ... }
DLLError already was wrapping the underlying Errno error, but never got
the Go 1.13 helper method.
Fixesgolang/go#42584
Change-Id: I0f32a5146946b1b37a30897ba825a56faefc792c
Reviewed-on: https://go-review.googlesource.com/c/go/+/269761
Run-TryBot: Jason A. Donenfeld <Jason@zx2c4.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Trust: Alex Brainman <alex.brainman@gmail.com>
Trust: Jason A. Donenfeld <Jason@zx2c4.com>
When either the server or client are lacking hardware support for
AES-GCM ciphers, indicated by the server lacking the relevant
instructions and by the client not putting AES-GCM ciphers at the top
of its preference list, reorder the preference list to de-prioritize
AES-GCM based ciphers when they are adjacent to other AEAD ciphers.
Also updates a number of recorded openssl TLS tests which previously
only specified TLS 1.2 cipher preferences (using -cipher), but not
TLS 1.3 cipher preferences (using -ciphersuites), to specify both
preferences, making these tests more predictable.
Fixes#41181.
Change-Id: Ied896c96c095481e755aaff9ff0746fb4cb9568e
Reviewed-on: https://go-review.googlesource.com/c/go/+/262857
Run-TryBot: Roland Shoemaker <roland@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Trust: Roland Shoemaker <roland@golang.org>
Trust: Katie Hockman <katie@golang.org>
This is a SHALL in RFC 7301, Section 3.2.
Also some more cleanup after NPN, which worked the other way around
(with the possibility that the client could pick a protocol the server
did not suggest).
Change-Id: I83cc43ca1b3c686dfece8315436441c077065d82
Reviewed-on: https://go-review.googlesource.com/c/go/+/239748
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Filippo Valsorda <filippo@golang.org>
Trust: Roland Shoemaker <roland@golang.org>
Reviewed-by: Roland Shoemaker <roland@golang.org>
Adds the (*tls.Conn).HandshakeContext method. This allows
us to pass the context provided down the call stack to
eventually reach the tls.ClientHelloInfo and
tls.CertificateRequestInfo structs.
These contexts are exposed to the user as read-only via Context()
methods.
This allows users of (*tls.Config).GetCertificate and
(*tls.Config).GetClientCertificate to use the context for
request scoped parameters and cancellation.
Replace uses of (*tls.Conn).Handshake with (*tls.Conn).HandshakeContext
where appropriate, to propagate existing contexts.
Fixes#32406
Change-Id: I33c228904fe82dcf57683b63627497d3eb841ff2
Reviewed-on: https://go-review.googlesource.com/c/go/+/246338
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Roland Shoemaker <roland@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
build, install, and test will now print deprecation messages when the
-i flag is used. clean will continue to support -i.
For #41696
Change-Id: I956c235c487a872c5e6c1395388b4d6cd5ef817a
Reviewed-on: https://go-review.googlesource.com/c/go/+/266368
Trust: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
For #40276
Change-Id: I5e631a4c9ce07f23640fb56eb455457bc55072c6
Reviewed-on: https://go-review.googlesource.com/c/go/+/266360
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This change also documents the need to set a Deadline before
calling Read or Write.
Fixes#31224
Change-Id: I89d6fe3ecb0a0076b4c61765f61c88056f951406
Reviewed-on: https://go-review.googlesource.com/c/go/+/266037
Trust: Katie Hockman <katie@golang.org>
Run-TryBot: Katie Hockman <katie@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Previously, we resolved each argument to 'go get' to a package path or
module path based on what was in the build list at existing versions,
even if the argument specified a different version explicitly. That
resulted in bugs like #37438, in which we variously resolved the wrong
version or guessed the wrong argument type for what is unambiguously a
package argument at the requested version.
We were also using a two-step upgrade/downgrade algorithm, which could
not only upgrade more that is strictly necessary, but could also
unintentionally upgrade *above* the requested versions during the
downgrade step.
This change instead uses an iterative approach, with an explicit
disambiguation step for the (rare) cases where an argument could match
the same package path in multiple modules. We use a hook in the
package loader to halt package loading as soon as an incorrect version
is found — preventing over-resolving — and verify that the result
after applying downgrades successfully obtained the requested versions
of all modules.
Making 'go get' be correct and usable is especially important now that
we are defaulting to read-only mode (#40728), for which we are
recommending 'go get' more heavily.
While I'm in here refactoring, I'm also reworking the API boundary
between the modget and modload packages. Previously, the modget
package edited the build list directly, and the modload package
accepted the edited build list without validation. For lazy loading
(#36460), the modload package will need to maintain additional
metadata about the requirement graph, so it needs tighter control over
the changes to the build list.
As of this change, modget no longer invokes MVS directly, but instead
goes through the modload package. The resulting API gives clearer
reasons in case of updates, which we can use to emit more useful
errors.
Fixes#37438
Updates #36460
Updates #40728
Change-Id: I596f0020f3795870dec258147e6fc26a3292c93a
Reviewed-on: https://go-review.googlesource.com/c/go/+/263267
Trust: Bryan C. Mills <bcmills@google.com>
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
In the current (pre-CL) version of the spec, the 2nd last shift
example appears to be using the array declared in the last example.
On a 32-bit platform, that array would have length 0, which would
lead to a panic in the 2nd last example. Also, if this code were
inside a function, it wouldn't compile (array declared after use).
Use an explicitly declared array for that specific shift example.
Also, split out all cases that produce different results for 32-
vs 64-bit ints.
Fixes#41835.
Change-Id: Ie45114224509e4999197226f91f7f6f934449abb
Reviewed-on: https://go-review.googlesource.com/c/go/+/260398
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This reverts commit 8f26b57f9a.
Reason for revert: break a bunch of code, include standard library.
Fixes#42123
Change-Id: Ife90ecbafd2cb395623d1db555fbfc9c1b0098e0
Reviewed-on: https://go-review.googlesource.com/c/go/+/264026
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This corresponds to the feature in https://golang.org/cl/263542, since
this can be a noteworthy change to people writing tools to inspect Go
builds.
Also amend the wording to clarify that build IDs are for an entire
compiled package, not just their export data or object file.
Change-Id: I2eb295492807d5d2997a35e5e2371914cb3ad3a0
Reviewed-on: https://go-review.googlesource.com/c/go/+/264158
Trust: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Change-Id: I89c61e444b3ab36f0081a5252d210cb265344122
Reviewed-on: https://go-review.googlesource.com/c/go/+/264157
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Trust: Alex Brainman <alex.brainman@gmail.com>
This way, a -toolexec tool can tell precisely what package is being
built when it's run. This was very hard to do before, because the tool
had to piece together that information given the build action's
arguments or flags.
Since there wasn't a good set of tests for -toolexec, add one in the
form of a test script. It builds a simple set of packages with a variety
of build tools, to ensure that all the cases behave as expected.
Like other recent master changes, include the changelog item for this
user-facing change too.
Fixes#15677.
Change-Id: I0a5a1d9485840323ec138b2e64b7e7dd803fdf90
Reviewed-on: https://go-review.googlesource.com/c/go/+/263357
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Trust: Daniel Martí <mvdan@mvdan.cc>
Fixes the check for the reserved namespace prefix
"xml" to be case insensitive, so as to match all variants of:
(('X'|'x')('M'|'m')('L'|'l'))
as mandated by Section 2.3 of https://www.w3.org/TR/REC-xml/
This is a roll forward of CL 203417, which was rolled back by CL 240179.
We've decided that the roll back was incorrect, and any broken tests
should be fixed.
The original CL 203417 was by Tamás Gulácsi.
Fixes#35151
For #39876
Change-Id: I2e6daa7aeb252531fba0b8a56086613e13059528
Reviewed-on: https://go-review.googlesource.com/c/go/+/264024
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Damien Neil <dneil@google.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
The other named errors - UnmarshalTypeError, etc - in this package do
the same, so we should prepend the package prefix to error messages
for consistency.
Add a note to the release docs in case this is interpreted as
a breaking change.
Fixes#36221.
Change-Id: Ie24b532bbf9812e108c259fa377e2a6b64319ed4
Reviewed-on: https://go-review.googlesource.com/c/go/+/263619
Run-TryBot: Kevin Burke <kev@inburke.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Kevin Burke <kev@inburke.com>
Trust: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Also put Reset in the correct place for the other
benchmarks.
name old time/op new time/op delta
NewWriteSum-8 1.01µs ± 0% 1.01µs ± 1% ~ (p=0.945 n=9+9)
name old speed new speed delta
NewWriteSum-8 31.7MB/s ± 0% 31.6MB/s ± 1% ~ (p=0.948 n=9+9)
name old alloc/op new alloc/op delta
NewWriteSum-8 544B ± 0% 544B ± 0% ~ (all equal)
name old allocs/op new allocs/op delta
NewWriteSum-8 7.00 ± 0% 7.00 ± 0% ~ (all equal)
Fixes#41089
Change-Id: I3dae660adbe4993963130bf3c2636bd53899164b
Reviewed-on: https://go-review.googlesource.com/c/go/+/261960
Trust: Katie Hockman <katie@golang.org>
Trust: Roland Shoemaker <roland@golang.org>
Run-TryBot: Katie Hockman <katie@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Reviewed-by: Roland Shoemaker <roland@golang.org>
Also fix BenchmarkAtof64Random* to initialize the test data when none
of the TestAtof* tests are run.
Passing "go test -test.count=5 -test.run=xxx -test.bench=Atof64" on to
benchstat:
name old time/op new time/op delta
Atof64Decimal-4 47.9ns ± 0% 48.3ns ± 1% ~ (p=0.238 n=4+5)
Atof64Float-4 58.3ns ± 3% 57.7ns ± 0% ~ (p=0.151 n=5+5)
Atof64FloatExp-4 107ns ± 0% 71ns ± 1% -33.89% (p=0.016 n=4+5)
Atof64Big-4 163ns ± 0% 166ns ± 2% ~ (p=0.159 n=4+5)
Atof64RandomBits-4 299ns ± 1% 166ns ± 1% -44.41% (p=0.008 n=5+5)
Atof64RandomFloats-4 188ns ± 1% 144ns ± 0% -23.03% (p=0.008 n=5+5)
The canada.json file from github.com/miloyip/nativejson-benchmark is
full of geospatial coordinates (i.e. numbers). With this program:
src, _ := ioutil.ReadFile("canada.json")
for i := 0; i < 5; i++ {
now := time.Now()
for j := 0; j < 10; j++ {
dst := interface{}(nil)
if err := json.Unmarshal(src, &dst); err != nil {
log.Fatal(err)
}
}
fmt.Println(time.Since(now))
}
Median of the 5 printed numbers, lower is better.
Before: 760.819549ms
After: 702.651646ms
Ratio: 1.08x
The new detailedPowersOfTen table weighs in at 596 * 16 = 9536 bytes,
but some of that weight gain can be clawed back, in a follow-up commit,
that folds in the existing powersOfTen table in extfloat.go.
RELNOTE=yes
Change-Id: I3953110deaa1f5f6941e88e8417c4665b649ed80
Reviewed-on: https://go-review.googlesource.com/c/go/+/260858
Run-TryBot: Nigel Tao <nigeltao@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Nigel Tao <nigeltao@golang.org>
This changes checks the signature generated during CreateCertificate
and returns an error if the verification fails. A benchmark is also
added. For RSA keys the delta looks to be insignificant, but for
ECDSA keys it introduces a much larger delta which is not ideal.
name old time/op new time/op delta
RSA_2048-8 1.38ms ± 6% 1.41ms ± 2% ~ (p=0.182 n=10)
ECDSA_P256-8 42.6µs ± 4% 116.8µs ± 4% +174.00% (p=0.000 n=1
Fixes#40458
Change-Id: I22827795bb9bb6868b4fa47391927db1d3bc19a1
Reviewed-on: https://go-review.googlesource.com/c/go/+/259697
Run-TryBot: Roland Shoemaker <roland@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Trust: Emmanuel Odeke <emm.odeke@gmail.com>
Trust: Roland Shoemaker <roland@golang.org>
Setting inittrace=1 causes the runtime to emit a single line to standard error for
each package with init work, summarizing the execution time and memory allocation.
The emitted debug information for init functions can be used to find bottlenecks
or regressions in Go startup performance.
Packages with no init function work (user defined or compiler generated) are omitted.
Tracing plugin inits is not supported as they can execute concurrently. This would
make the implementation of tracing more complex while adding support for a very rare
use case. Plugin inits can be traced separately by testing a main package importing
the plugins package imports explicitly.
$ GODEBUG=inittrace=1 go test
init internal/bytealg @0.008 ms, 0 ms clock, 0 bytes, 0 allocs
init runtime @0.059 ms, 0.026 ms clock, 0 bytes, 0 allocs
init math @0.19 ms, 0.001 ms clock, 0 bytes, 0 allocs
init errors @0.22 ms, 0.004 ms clock, 0 bytes, 0 allocs
init strconv @0.24 ms, 0.002 ms clock, 32 bytes, 2 allocs
init sync @0.28 ms, 0.003 ms clock, 16 bytes, 1 allocs
init unicode @0.44 ms, 0.11 ms clock, 23328 bytes, 24 allocs
...
Inspired by stapelberg@google.com who instrumented doInit
in a prototype to measure init times with GDB.
Fixes#41378
Change-Id: Ic37c6a0cfc95488de9e737f5e346b8dbb39174e1
Reviewed-on: https://go-review.googlesource.com/c/go/+/254659
Trust: Martin Möhrmann <moehrmann@google.com>
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Currently, mhdr/methods is emitted with the same len/cap. There's no way
to distinguish between exported and non-exported methods statically.
This CL splits mhdr/methods into two parts, use "len" for number of
exported methods, and "cap" for all methods. This fixes the bug in
issue #22075, which intends to return the number of exported methods but
currently return all methods.
Note that with this encoding, we still can access either
all/exported-only/non-exported-only methods:
mhdr[:cap(mhdr)] // all methods
mhdr // exported methods
mhdr[len(mhdr):cap(mhdr)] // non-exported methods
Thank to Matthew Dempsky (@mdempsky) for suggesting this encoding.
Fixes#22075
Change-Id: If662adb03ccff27407d55a5578a0ed05a15e7cdd
Reviewed-on: https://go-review.googlesource.com/c/go/+/259237
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The current specification does not foresee a SameSite attribute without
a value. While the existing implementation would serialize SameSite in a
way that would likely be ignored by well-impelemented clients, it is
better to not rely on this kind of quirks.
Specification: https://tools.ietf.org/html/draft-ietf-httpbis-rfc6265bis-05#section-4.1.1Fixes#36990
Change-Id: Ie51152741d7e84bab64d3e4e4f780286932acbde
Reviewed-on: https://go-review.googlesource.com/c/go/+/256498
Trust: Roberto Clapis <roberto@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Also add a few more TODOs as found by the relnote command.
It's an incomplete list due to #41849.
For #40700.
Change-Id: Id17a9be86d3338e1fcb281d26e7298ff26e92864
Reviewed-on: https://go-review.googlesource.com/c/go/+/260337
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Dmitri Shuralyov <dmitshur@golang.org>
netbsd/arm64 now complies with all the requirements for a port as
specified on https://golang.org/wiki/PortingPolicy
Note that this was preliminarily announced in the Go 1.13 release notes
(CL 183637) but then removed again due to the port lacking a builder at
that time (CL 192997).
Updates #30824
Change-Id: I2f40fabc84fe9cb699282e6a9d13ed9b64478e36
Reviewed-on: https://go-review.googlesource.com/c/go/+/259277
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Extends the IA5String encoding restrictions that are currently applied
to name constraints to dNSName, rfc822Name, and
uniformResourceIdentifier elements of the SAN. The utility function
isIA5String is updated to use unicode.MaxASCII rather than utf8.RuneSelf
as it is somewhat more readable.
Certificates that include these badly encoded names do exist, but are
exceedingly rare. zlint and other linters enforce this encoding and
searching censys.io reveals only three currently trusted certificates
with this particular encoding issue.
Fixes#26362
Change-Id: I7a4f3e165a1754e5b4bfaeabc03e01eb7367f3c9
Reviewed-on: https://go-review.googlesource.com/c/go/+/235078
Run-TryBot: Roland Shoemaker <roland@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Roland Shoemaker <roland@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Suggested by @yaxinlx.
Fixes#41612.
Change-Id: I98b9968a95d090ee3c67ff02678e1874e6d98c33
Reviewed-on: https://go-review.googlesource.com/c/go/+/257159
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Introduce GOOS=ios for iOS systems. GOOS=ios matches "darwin"
build tag, like GOOS=android matches "linux" and GOOS=illumos
matches "solaris". Only ios/arm64 is supported (ios/amd64 is
not).
GOOS=ios and GOOS=darwin remain essentially the same at this
point. They will diverge at later time, to differentiate macOS
and iOS.
Uses of GOOS=="darwin" are changed to (GOOS=="darwin" || GOOS=="ios"),
except if it clearly means macOS (e.g. GOOS=="darwin" && GOARCH=="amd64"),
it remains GOOS=="darwin".
Updates #38485.
Change-Id: I4faacdc1008f42434599efb3c3ad90763a83b67c
Reviewed-on: https://go-review.googlesource.com/c/go/+/254740
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
The instructions have already been updated in greater
detail in "Step 2: Configure git authentication", but
the overview needs updated to reflect the new workflow.
Change-Id: I6f411a3dc500a9058036a4a828403c0153e4220a
Reviewed-on: https://go-review.googlesource.com/c/go/+/256857
Trust: Katie Hockman <katie@golang.org>
Run-TryBot: Katie Hockman <katie@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
This flag, like the -e flag to 'go list', instructs the command to
make a best effort to continue in spite of errors for specific packages.
Fixes#26603
Change-Id: I5ee2f50c71870ae8ef3f9b3e5b045474adcca525
Reviewed-on: https://go-review.googlesource.com/c/go/+/255960
Trust: Bryan C. Mills <bcmills@google.com>
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
The cgo tool would sometimes emit a bitfield at an offset that did not
correspond to the C offset, such as for the example in the new test.
Change-Id: I61b2ca10ee44a42f81c13ed12865f2060168fed5
Reviewed-on: https://go-review.googlesource.com/c/go/+/252378
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
With this change, 'go install' will install executables in module mode
without using or modifying the module in the current directory, if
there is one.
For #40276
Change-Id: I922e71719b3a4e0c779ce7a30429355fc29930bf
Reviewed-on: https://go-review.googlesource.com/c/go/+/254365
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
The new semantics of the "all" package pattern can be implemented
without actually changing module loading per se. This change
implements those semantics, so that the change can be decoupled from
the changes to the module requirement graph.
For #36460
Change-Id: I0ee8b17afa8b728dc470a42a540fcc01764a4442
Reviewed-on: https://go-review.googlesource.com/c/go/+/240623
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
Change the section to use <dl>, <dt>, and <dd> tags to match
previous documents.
Change-Id: Ide0bea698a84ed6b61b364ef9e2f3801ebb8d4d6
Reviewed-on: https://go-review.googlesource.com/c/go/+/250897
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes the file server to reject requests of the form:
"Range": "bytes=--N"
where "-N" is a negative suffix-length as designated by the
grammar in RFC 7233 Section 2.1, "Byte-Ranges", which specifies
that suffix-length MUST be of the form 1*DIGIT aka a non-negative digit.
Thus requests such as:
"Range": "bytes=--2"
will be rejected with a "416 Range Not Satisfiable" response.
Fixes#40940
Change-Id: I3e89f8326c14af30d8bdb126998a50e02ba002d9
Reviewed-on: https://go-review.googlesource.com/c/go/+/252497
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This catches cases where a test calls code that calls os.Exit(0),
thereby skipping all subsequent tests.
Fixes#29062
Change-Id: If9478972f40189e27623557e7141469ca4234d89
Reviewed-on: https://go-review.googlesource.com/c/go/+/250977
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This permits programs to reliably detect whether they are using a
closed network connection.
Fixes#4373
Change-Id: Ib4ce8cc82bbb134c4689f0ebc8b9b11bb8b32a22
Reviewed-on: https://go-review.googlesource.com/c/go/+/250357
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Russ Cox <rsc@golang.org>
For #24031
Change-Id: I9bd0905e9aacee4bec3463b7d91f6f0929744752
Reviewed-on: https://go-review.googlesource.com/c/go/+/228384
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The StripPrefix wrapper strips a prefix string from the request's
URL.Path field, but doesn't touch the RawPath field. This leads to the
confusing situation when StripPrefix handles a request with URL.RawPath
populated (due to some escaped characters in the request path) and the
wrapped request's RawPath contains the prefix but Path does not.
This change modifies StripPrefix to strip the prefix from both Path and
RawPath. If there are escaped characters in the prefix part of the
request URL the stripped handler serves a 404 instead of invoking the
underlying handler with a mismatched Path/RawPath pair.
This is a backward incompatible change for a very small minority of
requests; I would be surprised if anyone is depending on this behavior,
but it is possible. If that's the case, we could make a more
conservative change where the RawPath is trimmed if possible, but when
the prefix contains escaped characters then we don't 404 but rather send
through the invalid Path/RawPath pair as before.
Fixes#24366
Change-Id: I7030b8c183a3dfce307bc0272bba9a18df4cfe08
Reviewed-on: https://go-review.googlesource.com/c/go/+/233637
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The log package is used with the net/http but was not in the import clause.
Change-Id: Ic45b987633adf0ee15defd4d136b5d37027e22b0
GitHub-Last-Rev: e74aff5337
GitHub-Pull-Request: golang/go#36674
Reviewed-on: https://go-review.googlesource.com/c/go/+/215618
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Add a draft version of a blurb on improvements to the linker. This
will need to be finalized later in the release since there are still
some additional changes to be made to the linker in 1.16.
Updates #40703.
Change-Id: Id85c7e129071cc2faacb09c53a2968bd52b0a7b4
Reviewed-on: https://go-review.googlesource.com/c/go/+/248238
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Austin Clements <austin@google.com>
In Go 1.15 we switched the default linking mode for PIE on
Linux/AMD64 and Linux/ARM64 to internal linking. Clarify that
the previous behavior (external linking) can still be used with
a flag.
Fixes#40719.
Change-Id: Ib7042622bc91e1b1aa31f520990d03b5eb6c56bb
Reviewed-on: https://go-review.googlesource.com/c/go/+/248199
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This template is based on CL 220278 and previous ones like it.
Include Compiler and Linker sections proactively, they can be
removed if they don't end up being needed for Go 1.16.
Use two spaces of indentation for TODOs to set a better precedent
for the final text that will take its place.
'relnote -html' does not report any changes at this time.
For #40700.
Change-Id: I096b0ce0d33aaaa6fae9c91c0d2dfb89b9c5e94c
Reviewed-on: https://go-review.googlesource.com/c/go/+/248198
Reviewed-by: Carlos Amedee <carlos@golang.org>
See golang.org/cl/240657, which reverted the original change to fix the
regression reported in golang.org/issue/39427.
Updates #37419.
Change-Id: I39fbaa0b028ee00856cffea38879a631f540f057
Reviewed-on: https://go-review.googlesource.com/c/go/+/247718
Reviewed-by: Andrew Bonventre <andybons@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Run-TryBot: Andrew Bonventre <andybons@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The StdFormat flag was added as part of CL 231461, where the primary aim
was to fix the bug #37476. It's expected that the existing printer modes
only adjust spacing but do not change any of the code text itself. A new
printing flag served as a way for cmd/gofmt and go/format to delegate
a part of formatting work to the printer—where it's more more convenient
and efficient to perform—while maintaining current low-level printing
behavior of go/printer unmodified.
We already have cmd/gofmt and the go/format API that implement standard
formatting of Go source code, so there isn't a need to expose StdFormat
flag to the world, as it can only cause confusion.
Consider that to format source in canonical gofmt style completely it
may require tasks A, B, C to be done. In one version of Go, the printer
may do both A and B, while cmd/gofmt and go/format will do the remaining
task C. In another version, the printer may take on doing just A, while
cmd/gofmt and go/format will perform B and C. This makes it hard to add
a gofmt-like mode to the printer without compromising on above fluidity.
This change prefers to shift back some complexity to the implementation
of the standard library, allowing us to avoid creating the new exported
printing flag just for the internal needs of gofmt and go/format today.
We may still want to re-think the API and consider if something better
should be added, but unfortunately there isn't time for Go 1.15. We are
not adding new APIs now, so we can defer this decision until Go 1.16 or
later, when there is more time.
For #37476.
For #37453.
For #39489.
For #37419.
Change-Id: I0bb07156dca852b043487099dcf05c5350b29e20
Reviewed-on: https://go-review.googlesource.com/c/go/+/240683
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This doesn't change how ExtraNames are printed, so as not to cause
unnecessary churn of current outputs. Switched the ExtraNames check to a
nil check as we are checking for just-parsed values.
Fixes#39924Fixes#39873
Change-Id: Ifa07cfc1a057d73643710a774ef8a154222db187
Reviewed-on: https://go-review.googlesource.com/c/go/+/240543
Run-TryBot: Filippo Valsorda <filippo@golang.org>
Reviewed-by: Katie Hockman <katie@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The additions were generated using golang.org/x/build/cmd/relnote.
Updates #37419
Change-Id: I99e934377e4bb511c44908039ad6d3bfd3ee35ce
Reviewed-on: https://go-review.googlesource.com/c/go/+/241065
Run-TryBot: Carlos Amedee <carlos@golang.org>
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Reviewed-by: Andrew Bonventre <andybons@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Mention support for the 64-bit RISC-V instruction set (GOARCH=riscv64)
in the "Installing Go from source" document. Also sort the list of
supported instruction sets alphabetically.
Updates #27532
Change-Id: I07a443044a41a803853978dd7f7446de89ecceb5
Reviewed-on: https://go-review.googlesource.com/c/go/+/240377
Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com>
Also fix missing <code> tags in the other encoding/asn1 note.
Updates #37419
Change-Id: Ic0e9131016b44ed864629aa8d0a7fddb57146d21
Reviewed-on: https://go-review.googlesource.com/c/go/+/240518
Reviewed-by: Filippo Valsorda <filippo@golang.org>
The sample code in 'Interfaces and methods' section contains a
data race. Handlers are served concurrently. The handler does write
and read operations; `go test -race` would fail (with concurrent
requests). Since the doc is frozen and the code remains less
cluttered without locks/atomic, don't change the sample code.
Change-Id: I654b324d2f0b7f48497822751907c7d39e2f0e3d
Reviewed-on: https://go-review.googlesource.com/c/go/+/239877
Reviewed-by: Rob Pike <r@golang.org>
The change is rolled back in CL 240179.
For #35151
For #39876
Change-Id: Id26ccbdb482772ac31c642156a9900102397b043
Reviewed-on: https://go-review.googlesource.com/c/go/+/240012
Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
This adds an alt tag for accessibility. The alt text is a visual
description of the text that is read out loud to users using a
screen reader. The HTML specifications indicate that alt tags for
decorative images should be left blank.
Fixes#39861
Change-Id: I76c39a461ceabe685826aa46e4f26ad893d50634
Reviewed-on: https://go-review.googlesource.com/c/go/+/240258
Reviewed-by: Alexander Nohe <alex.nohe427@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Also crypto/tls.Config.BuildNameToCertificate.
Note that this field and method were deprecated in the Go 1.14 release,
so this change is to the 1.14 release notes.
Fixes#37626
Change-Id: If8549bc746f42a93f1903439e1b464b3e81e2c19
Reviewed-on: https://go-review.googlesource.com/c/go/+/240005
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Now that we've added a os.File.ReadFrom method, io.CopyBuffer to a
os.File will no longer use the provided buffer.
For #16474
For #36817
For #37419
Change-Id: I79a3bf778ff93eab88e88dd9ecbb8c7ea101e868
Reviewed-on: https://go-review.googlesource.com/c/go/+/238864
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Users don't necessarily know if their OS is ELF-based.
For #37419.
Change-Id: I4a4256c5f5eb34211729e1311582bb0e210f1f8d
Reviewed-on: https://go-review.googlesource.com/c/go/+/238240
Reviewed-by: Than McIntosh <thanm@google.com>
This saves a redirect and makes the document more consistent.
For #37419
Change-Id: Ic3bd62f8caacf67ffe43a359624e11bed8b8cfaf
Reviewed-on: https://go-review.googlesource.com/c/go/+/237540
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Use the binutils Git repository instead of CVS.
Change-Id: I10100ca44d64ab3621367d1d4ac9e9a50d212d0d
Reviewed-on: https://go-review.googlesource.com/c/go/+/237839
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The GCC code repository is now hosted on Git. Adjust the instructions in
gccgo_install.html accordingly.
Change-Id: I443a8b645b63e63785979bc0554521e3dc3b0bf7
Reviewed-on: https://go-review.googlesource.com/c/go/+/237798
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Other command line arguments are written in code tags, so add a code tag for consistency.
For #37419
Change-Id: I1948536c3a1860d93726484be2dc7bcb03dfdc2f
Reviewed-on: https://go-review.googlesource.com/c/go/+/237539
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Replace tab indentation with spaces for consistency, as all other indentation is done with spaces.
For #37419
Change-Id: I728a75ae0d00e637f57eb455b6039ffc1a5feed2
Reviewed-on: https://go-review.googlesource.com/c/go/+/237538
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Restore previously sent SCTs and stapled OCSP response during session
resumption for both TLS 1.2 and 1.3. This behavior is somewhat
complicated for TLS 1.2 as SCTs are sent during the server hello,
so they override what is saved in ClientSessionState. It is likely
that if the server is sending a different set of SCTs there is probably
a reason for doing so, such as a log being retired, or SCT validation
requirements changing, so it makes sense to defer to the server in
that case.
Fixes#39075
Change-Id: I3c0fa2f69c6bf0247a447c48a1b4c733a882a233
Reviewed-on: https://go-review.googlesource.com/c/go/+/234237
Reviewed-by: Filippo Valsorda <filippo@golang.org>
The minor changes to the library section has been populated
with TODOs for individual packages using relnote in CL 235757,
and they've been resolved in the following CLs.
We will look things over as part of finishing touches on
the release notes, but this TODO is resolved for beta 1.
For #37419.
Change-Id: I942f81a957fe8df8f630b4406ca29f73602d080a
Reviewed-on: https://go-review.googlesource.com/c/go/+/237157
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
CL 236857 removed all uses of whitelist/blacklist, which is great.
But it substituted awkward phrasing using allowlist/blocklist,
especially as verbs or participles. This CL uses more standard English,
like "allow the function" or "blocked functions" instead of
"allowlist the function" or "blocklisted functions".
Change-Id: I9106a2fdbd62751c4cbda3a77181358a8a6d0f13
Reviewed-on: https://go-review.googlesource.com/c/go/+/236917
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
I had a look at the changes between 1.14 and master, and these are the
only two that seem relevant enough for the changelog.
There was also CL 179337 to reuse values when decoding map elements, but
it got reverted in CL 234559 and is not being included in 1.15.
Updates #37419.
Change-Id: Ib125415a953471ce29553a413d85aaf4b18a7a12
Reviewed-on: https://go-review.googlesource.com/c/go/+/236523
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
There's been plenty of discussion on the usage of these terms in tech.
I'm not trying to have yet another debate. It's clear that there are
people who are hurt by them and who are made to feel unwelcome by their
use due not to technical reasons but to their historical and social
context. That's simply enough reason to replace them.
Anyway, allowlist and blocklist are more self-explanatory than whitelist
and blacklist, so this change has negative cost.
Didn't change vendored, bundled, and minified files. Nearly all changes
are tests or comments, with a couple renames in cmd/link and cmd/oldlink
which are extremely safe. This should be fine to land during the freeze
without even asking for an exception.
Change-Id: I8fc54a3c8f9cc1973b710bbb9558a9e45810b896
Reviewed-on: https://go-review.googlesource.com/c/go/+/236857
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Khosrow Moossavi <khos2ow@gmail.com>
Reviewed-by: Leigh McCulloch <leighmcc@gmail.com>
Reviewed-by: Urban Ishimwe <urbainishimwe@gmail.com>
Use the "Core library -> runtime" section for changes that affect the
runtime package API and use the top-level "Runtime" section for
package-independent behavior changes. Also, move the one change that's
really about os (and net) into the "os" package section and reword it
to be more accurate.
Updates #37419.
Change-Id: I32896b039f29ac67308badd0d0b36e8c6e39f64f
Reviewed-on: https://go-review.googlesource.com/c/go/+/236718
Reviewed-by: Michael Knyszek <mknyszek@google.com>
The TODO was added durring the initial creation of the document.
In the current location, it makes it seem like the tzdata documents
are incomplete when they are complete. It is understood that the
entire Core library section will be a work in progress until the release.
For #37419
Change-Id: Ic857eb0ec2583781c701985ea62e519e9d940090
Reviewed-on: https://go-review.googlesource.com/c/go/+/236760
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
The current contributor documentation is tailored towards contributors
to golang/go, but we have a number of increasingly popular x/ repos.
In this CL, I tried to generalize the language to make it apply to any
repository.
Also, I fixed an old link I noticed in editors.html.
Change-Id: Id9d8e448262ed8c3a67f49be5d554ca29df9d3c1
Reviewed-on: https://go-review.googlesource.com/c/go/+/234899
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
The constants were added in CL 222637.
For #37419
Change-Id: Iae662d677d31c44a7560399ef6771f520c1f7663
Reviewed-on: https://go-review.googlesource.com/c/go/+/236682
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Per the note at the top of go1.15.html.
Updates #37419.
Change-Id: Ia6917347ca1e3ebe8c55f9c0ec74e49ff481a64f
Reviewed-on: https://go-review.googlesource.com/c/go/+/236719
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Add a blurb to the release notes mentioning that the
linker now supports DWARF generation for -buildmode=plugin,
and that plugin builds work now for freebsd/amd64.
Updates #37419.
Change-Id: I84da7a52af84a9d765f73ca7ea525e7af8d64f05
Reviewed-on: https://go-review.googlesource.com/c/go/+/236162
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Change-Id: Ie37e993e840df2c063dee98fa3f6eca8e8713ca3
Reviewed-on: https://go-review.googlesource.com/c/go/+/236177
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Add a blurb to the release notes describing improvements made to the
Go linker in the most recent development cycle.
Updates #37419.
Change-Id: I3b870f0c00efc0b7b33aab2631d8c4e1c273922d
Reviewed-on: https://go-review.googlesource.com/c/go/+/236159
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
The additions were generated using golang.org/x/build/cmd/relnote.
Updates #37419
Change-Id: Iad7b564dd7e6cbcbd0d216c2530802e086ec49cd
Reviewed-on: https://go-review.googlesource.com/c/go/+/235757
Run-TryBot: Alexander Rakoczy <alex@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
There are no language changes in Go 1.15, so document that.
For #37419.
Change-Id: I1e96e58b701f1758d64c79881dfa0b1109836b83
Reviewed-on: https://go-review.googlesource.com/c/go/+/235580
Reviewed-by: Robert Griesemer <gri@golang.org>
Fold the descriptions of testing.T.Deadline and TestMain related changes
into the existing section for package testing.
Also link T.Deadline to its godoc.
Change-Id: I732c45fb879305099cb8a51a77ef11fba1b2f1e3
Reviewed-on: https://go-review.googlesource.com/c/go/+/234557
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Ctty was always handled as a child descriptor, but in some cases
passing a parent descriptor would also work. This depended on
unpredictable details of the implementation. Reject those cases to
avoid confusion.
Also reject setting both Setctty and Foreground, as they use Ctty
in incompatible ways. It's unlikely that any programs set both fields,
as they don't make sense together.
Fixes#29458
Change-Id: Ieba2d625711fd4b82c8e65e1feed02fd1fb25e6d
Reviewed-on: https://go-review.googlesource.com/c/go/+/231638
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Damien Neil <dneil@google.com>
Adding the usage of PCALIGN directive for arm64, and updating some
details on using some directives defined in the textflag.h file.
Change-Id: I43d363e3337939bab69b856831caf06803a292d2
Reviewed-on: https://go-review.googlesource.com/c/go/+/227801
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This change adjusts go command to pass -buildmode=pie to cmd/link,
if -buildmode is not explicitly provided.
Fixes#35192
Change-Id: Iec020131e676eb3e9a2df9eea1929b2af2b6df04
Reviewed-on: https://go-review.googlesource.com/c/go/+/230217
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
If an I/O operation fails because a deadline was exceeded,
return os.ErrDeadlineExceeded. We used to return poll.ErrTimeout,
an internal error, and told users to check the Timeout method.
However, there are other errors with a Timeout method that returns true,
notably syscall.ETIMEDOUT which is returned for a keep-alive timeout.
Checking errors.Is(err, os.ErrDeadlineExceeded) should permit code
to reliably tell why it failed.
This change does not affect the handling of net.Dialer.Deadline,
nor does it change the handling of net.DialContext when the context
deadline is exceeded. Those cases continue to return an error
reported as "i/o timeout" for which Timeout is true, but that error
is not os.ErrDeadlineExceeded.
Fixes#31449
Change-Id: I0323f42e944324c6f2578f00c3ac90c24fe81177
Reviewed-on: https://go-review.googlesource.com/c/go/+/228645
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
net/http/pprof: delta profile support
runtime/pprof: profile labels plumbing for goroutine profiles
Change-Id: I92e750dc894c8c6b3c3ba10f7be58bb541d3c289
Reviewed-on: https://go-review.googlesource.com/c/go/+/230023
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This page has moved to the x/website repo in CL 229482 (commit
golang/website@70f4ee8c7e).
Remove the old copy in this repo since it's no longer used.
For #29206.
Change-Id: Ief093ed8c5dfec43e06d473e4282275f61da74a5
Reviewed-on: https://go-review.googlesource.com/c/go/+/229485
Reviewed-by: Alexander Rakoczy <alex@golang.org>
unsafe.Pointer safety rule #4 says "The compiler handles a Pointer
converted to a uintptr in the argument list of a call". Within escape
analysis, we've always required this be a single conversion
unsafe.Pointer->uintptr conversion, but the corresponding logic in
order is somewhat laxer, allowing arbitrary chains of OCONVNOPs from
unsafe.Pointer to uintptr.
This CL changes order to be stricter to match escape analysis.
Passes toolstash-check.
Change-Id: Iadd210d2123accb2020f5728ea2a47814f703352
Reviewed-on: https://go-review.googlesource.com/c/go/+/229578
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Clean up the code a little bit to make it clearer:
Don't check throwsplit for a SI_USER signal.
If throwsplit is set for a SigPanic signal, always throw;
discard any other flags.
Fixes#36420
Change-Id: Ic9dcd1108603d241f71c040504dfdc6e528f9767
Reviewed-on: https://go-review.googlesource.com/c/go/+/228900
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Given:
type u struct{}
func (u) M() {}
type t struct { u; u2 u }
var v = reflect.ValueOf(t{})
Package reflect allows:
v.Method(0) // v.M
v.Field(0).Method(0) // v.u.M
but panics from:
v.Field(1).Method(0) // v.u2.M
because u2 is not an exported field. However, u is not an exported
field either, so this is inconsistent.
It seems like this behavior originates from #12367, where it was
decided to allow traversing unexported embedded fields to be able to
access their exported fields, since package reflect doesn't provide an
alternative way to access promoted fields directly.
But extending that logic to promoted *methods* was inappropriate,
because package reflect's normal method handling logic already handles
promoted methods correctly. This CL corrects that mistake.
Fixes#38521.
Change-Id: If65008965f35927b4e7927cddf8614695288eb19
Reviewed-on: https://go-review.googlesource.com/c/go/+/228902
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
These are analogous to URL.RawPath and URL.EscapedPath
and allow users fine-grained control over how the fragment
section of the URL is escaped. Some tools care about / vs %2f,
same problem as in paths.
Fixes#37776.
Change-Id: Ie6f556d86bdff750c47fe65398cbafd834152b47
Reviewed-on: https://go-review.googlesource.com/c/go/+/227645
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Importing the time/tzdata package will embed a copy of the IANA
timezone database into the program. This will let the program work
correctly when the timezone database is not available on the system.
It will increase the size of the binary by about 800K.
You can also build a program with -tags timetzdata to embed the
timezone database in the program being built.
This is a roll forward of CL 224588 which was rolled back due to
test failures. In this version, the test is in the time package,
not the time/tzdata package. That lets us compare the zip file
to the time/tzdata package, ensuring that we are looking at similar
versions of tzdata information.
Fixes#21881Fixes#38013Fixes#38017
Change-Id: I916d9d8473abe201b897cdc2bbd9168df4ad671c
Reviewed-on: https://go-review.googlesource.com/c/go/+/228101
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
This reverts CL 224588.
Reason for revert: Test failing on secondary platforms.
Change-Id: Ic15fdc73a0d2b860e776733abb82c58809e13160
Reviewed-on: https://go-review.googlesource.com/c/go/+/228200
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Importing the time/tzdata package will embed a copy of the IANA
timezone database into the program. This will let the program work
correctly when the timezone database is not available on the system.
It will increase the size of the binary by about 800K.
You can also build a program with -tags timetzdata to embed the
timezone database in the program being built.
Fixes#21881Fixes#38013Fixes#38017
Change-Id: Iffddee72a8f46c95fee3bcde43c142d6899d9246
Reviewed-on: https://go-review.googlesource.com/c/go/+/224588
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
The repository of delve has already switched from the personal
account github.com/derekparker/delve to the organization account
github.com/go-delve/delve. According to go-delve/delve#1456.
Change-Id: Ie64f72c2808a8aca5059a75e2c2f11d8691e66b3
GitHub-Last-Rev: f90120c3b3
GitHub-Pull-Request: golang/go#38387
Reviewed-on: https://go-review.googlesource.com/c/go/+/227999
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Adds an entry in the Go1.15 release notes, but also
adds an example test for URL.Redacted.
Follow-up of CL 207082.
Updates #37419
Change-Id: Ibf81989778907511a3a3a3e4a03d1802b5dd9762
Reviewed-on: https://go-review.googlesource.com/c/go/+/227997
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
flag treats -h or -help as a special case to print a nice help
message, but exit with a status code of 2. This update makes
that status code 0.
Fixes#37533
Change-Id: I7e0bd29944ce46607fb7cfc6740734f7444a151a
GitHub-Last-Rev: 83f64d757b
GitHub-Pull-Request: golang/go#37530
Reviewed-on: https://go-review.googlesource.com/c/go/+/221427
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
URLs in GOPROXY may now be separated with commas (,) or pipes (|). If
a request to a proxy fails with any error (including connection errors
and timeouts) and the proxy URL is followed by a pipe, the go command
will try the request with the next proxy in the list. If the proxy is
followed by a comma, the go command will only try the next proxy if
the error a 404 or 410 HTTP response.
The go command will determine how to connect to the checksum database
using the same logic. Before accessing the checksum database, the go
command sends a request to <proxyURL>/sumdb/<sumdb-name>/supported.
If a proxy responds with 404 or 410, or if any other error occurs and
the proxy URL in GOPROXY is followed by a pipe, the go command will
try the request with the next proxy. If all proxies respond with 404
or 410 or are configured to fall back on errors, the go command will
connect to the checksum database directly.
This CL does not change the default value or meaning of GOPROXY.
Fixes#37367
Change-Id: I35dd218823fe8cb9383e9ac7bbfec2cc8a358748
Reviewed-on: https://go-review.googlesource.com/c/go/+/226460
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Go build scripts on UNIX (make.bash, all.bash) have not required
GOROOT_BOOTSTRAP since August 2017 (CL 57753). Windows build scripts
have followed suit since CL 96455. Most people building Go will have
a Go toolchain in their PATH and will not need to specify a different
toolchain.
This CL removes the GOROOT_BOOTSTRAP mention from the contribution guide
(it was there for Windows only, but it's not required anymore). The guide
is meant to be light and clear for beginners and is not supposed to be
a reference, so there's not need to keep mentioning GOROOT_BOOTSTRAP.
Also update install-source.html to reflect the current status quo,
where using the PATH is probably the first and most used default, and
GOROOT_BOOTSTRAP is just an option.
Change-Id: Iab453e61b0c749c256aaaf81ea9b2ae58822cb89
Reviewed-on: https://go-review.googlesource.com/c/go/+/224717
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
This reverts CL 223257.
Reason for revert: broke TestScript/mod_gonoproxy on the longtest builders.
Change-Id: I8637c52c5a7d5333a37ed1e9998c49786525ecb1
Reviewed-on: https://go-review.googlesource.com/c/go/+/225757
Reviewed-by: Michael Matloob <matloob@golang.org>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
URLs in GOPROXY may now be separated with commas (,) or pipes (|). If
a request to a proxy fails with any error (including connection errors
and timeouts) and the proxy URL is followed by a pipe, the go command
will try the request with the next proxy in the list. If the proxy is
followed by a comma, the go command will only try the next proxy if
the error a 404 or 410 HTTP response.
The go command will determine how to connect to the checksum database
using the same logic. Before accessing the checksum database, the go
command sends a request to <proxyURL>/sumdb/<sumdb-name>/supported.
If a proxy responds with 404 or 410, or if any other error occurs and
the proxy URL in GOPROXY is followed by a pipe, the go command will
try the request with the next proxy. If all proxies respond with 404
or 410 or are configured to fall back on errors, the go command will
connect to the checksum database directly.
This CL does not change the default value or meaning of GOPROXY.
Fixes#37367
Change-Id: If53152ec1c3282c67d4909818b666af58884fb2c
Reviewed-on: https://go-review.googlesource.com/c/go/+/223257
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
If TestMain reports a wrong exit code to os.Exit, the test will be
exited with exist code inconsist with test results.
This CL eliminates the requirement of calling os.Exit in TestMain.
Now, m.Run records the execution status of its test, the outer
main func will call os.Exit with that exit code if TestMain does
not call os.Exit.
If TestMain does not call m.Run, the outer main func remain calls
os.Exit(0) as before.
Fixes#34129
Change-Id: I9598023e03b0a6260f0217f34df41c231c7d6489
Reviewed-on: https://go-review.googlesource.com/c/go/+/219639
Reviewed-by: Ian Lance Taylor <iant@golang.org>
currently the snippet is segmented but should be one code snippet.
Change-Id: Ic747faf9bb1b52f9d1786eca70616a05b71ee801
Reviewed-on: https://go-review.googlesource.com/c/go/+/211198
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Make panics more useful by printing values, if their
underlying kind is printable, instead of just their memory address.
Thus now given any custom type derived from any of:
float*, int*, string, uint*
if we have panic with such a result, its value will be printed.
Thus given any of:
type MyComplex128 complex128
type MyFloat64 float64
type MyString string
type MyUintptr uintptr
panic(MyComplex128(32.1 + 10i))
panic(MyFloat64(-93.7))
panic(MyString("This one"))
panic(MyUintptr(93))
They will now print in the panic:
panic: main.MyComplex64(+1.100000e-001+3.000000e+000i)
panic: main.MyFloat64(-9.370000e+001)
panic: main.MyString("This one")
panic: main.MyUintptr(93)
instead of:
panic: (main.MyComplex128) (0xe0100,0x138cc0)
panic: (main.MyFloat64) (0xe0100,0x138068)
panic: (main.MyString) (0x48aa00,0x4c0840)
panic: (main.MyUintptr) (0xe0100,0x137e58)
and anything else will be printed as in the past with:
panic: (main.MyStruct) (0xe4ee0,0x40a0e0)
Also while here, updated the Go1.15 release notes.
Fixes#37531
Change-Id: Ia486424344a386014f2869ab3483e42a9ef48ac4
Reviewed-on: https://go-review.googlesource.com/c/go/+/221779
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL documents that unsynchronized send and close operations
on a channel are detected as a race condition.
Fixes#27769
Change-Id: I7495a2d0dd834c3f3b6339f8ca18ea21ae979aa8
Reviewed-on: https://go-review.googlesource.com/c/go/+/219637
Reviewed-by: Rob Pike <r@golang.org>
This removes much of the complexity of the implementation and use of
the cmd/go/internal/cmdflag package, and makes the behavior of GOFLAGS
in 'go test' and 'go vet' more consistent with other subcommands.
Some of the complexity reduction has been offset by code comments and
bug fixes, particularly for the handling of GOPATH arguments and flag
terminators ('--').
Fixes#32471Fixes#18682
Change-Id: I1f6e46a7c679062e1e409e44a2b9f03b9172883b
Reviewed-on: https://go-review.googlesource.com/c/go/+/211358
Reviewed-by: Jay Conrod <jayconrod@google.com>
Adding a link to this guide will provide more value to instructing Go
users to migrate to modules.
Updates #36878
Change-Id: Ie6ab45efcd35cc5e5ba5adc16ba0ca4cca4292bc
Reviewed-on: https://go-review.googlesource.com/c/go/+/220906
Run-TryBot: Alexander Rakoczy <alex@golang.org>
Reviewed-by: thepudds <thepudds1460@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
As far as I can tell, there is no public documentation on this topic,
which cost me several days of debugging.
I am possibly unusual in that I run binaries in production with the
race detector turned on, but I think that others who do the same may
want to be aware of the risk.
Updates #26813.
Updates #37233.
Change-Id: I1f8111bd01d0000596e6057b7cb5ed017d5dc655
Reviewed-on: https://go-review.googlesource.com/c/go/+/220586
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Use consistent indentation for one of the paragraphs.
Include issue number in the visible text, so it is easier to read.
Fixes#36878
Change-Id: Iab857b26b1d27b0137e981126207089db108d530
Reviewed-on: https://go-review.googlesource.com/c/go/+/220646
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Alexander Rakoczy <alex@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL implements Ticker.Reset method in time package.
Benchmark:
name time/op
TickerReset-12 6.41µs ±10%
TickerResetNaive-12 95.7µs ±12%
Fixes#33184
Change-Id: I4cbd31796efa012b2a297bb342158f11a4a31fef
Reviewed-on: https://go-review.googlesource.com/c/go/+/220424
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This reverts CL 217362 (6e5652bebede2d53484a872f6d1dfeb498b0b50c.)
Reason for revert: Causing failures on arm64 bots. See #33184 for more info
Change-Id: I72ba40047e4138767d95aaa68842893c3508c52f
Reviewed-on: https://go-review.googlesource.com/c/go/+/220638
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL implements Ticker.Reset method in time package.
Benchmark:
name time/op
TickerReset-12 6.41µs ±10%
TickerResetNaive-12 95.7µs ±12%
Fixes#33184
Change-Id: I12c651f81e452541bcbbc748b45f038aae1f8dae
Reviewed-on: https://go-review.googlesource.com/c/go/+/217362
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
It might break a program if it was depending on undocumented behavior.
Give a proper heads up.
Fixes#37308.
Change-Id: Id65bc70def1138d5506b694329c52250b417ec6f
Reviewed-on: https://go-review.googlesource.com/c/go/+/220418
Reviewed-by: Bryan C. Mills <bcmills@google.com>
