There is no NL at the end of README, and that make it strange
when doing "cat misc/android/README".
Change-Id: Ib47953d7b16e8927a4d6be7d5be8de8f2ddbcc39
Reviewed-on: https://go-review.googlesource.com/114010
Reviewed-by: Elias Naur <elias.naur@gmail.com>
This commit improves wasm_exec.js to give more control to the
code that uses this helper:
- Allow to load and run more than one Go program at the same time.
- Move WebAssembly.instantiate out of wasm_exec.js so the caller
can optimize for load-time performance, e.g. by using
instantiateStreaming.
- Allow caller to provide argv, env and exit callback.
Updates #18892
Change-Id: Ib582e6f43848c0118ea5c89f2e24b371c45c2050
Reviewed-on: https://go-review.googlesource.com/113515
Reviewed-by: Agniva De Sarker <agniva.quicksilver@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This commit addresses a FIXME left in the code of wasm_exec.js to
properly get the upper 32 bit of a JS number to be stored as an
64-bit integer. A bitshift operation is not possible, because in
JavaScript bitshift operations only operate on the lower 32 bits.
Change-Id: I8f627fd604e592682d9d322942a4852db64a7f66
Reviewed-on: https://go-review.googlesource.com/113076
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This commit changes wasm_exec.js so it only puts the single
name "go" into the global namespace. Other names became private
or were turned into a property/method of "go".
Change-Id: I633829dfd3c06936f092c0a14b9978bf855e41fe
Reviewed-on: https://go-review.googlesource.com/112980
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Agniva De Sarker <agniva.quicksilver@gmail.com>
When running tests that fails to complete within the test timeout,
the go tool sends the test program a SIGQUIT signal to print
backtraces. However, for tests running with an exec wrapper, the
resulting backtraces will come from the exec wrapper process and
not the test program.
Change the iOS exec wrapper to forward SIGQUIT signals to the lldb
python driver and change the driver to forward the signals to the
running test on the device.
Before:
$ GOARCH=arm64 go test forever_test.go
lldb: running program
SIGQUIT: quit
PC=0x10816fe m=0 sigcode=0
goroutine 54 [syscall]:
syscall.Syscall6(0x7, 0x16ab, 0xc000033dfc, 0x0, 0xc000116f30, 0x0, 0x0, 0xc000116f30, 0x0, 0x1328820)
/Users/elias/go-tip/src/syscall/asm_darwin_amd64.s:41 +0x5 fp=0xc000033d48 sp=0xc000033d40 pc=0x10816d5
syscall.wait4(0x16ab, 0xc000033dfc, 0x0, 0xc000116f30, 0x90, 0x1200e00, 0x1)
/Users/elias/go-tip/src/syscall/zsyscall_darwin_amd64.go:34 +0x7b fp=0xc000033dc0 sp=0xc000033d48 pc=0x107e4eb
syscall.Wait4(0x16ab, 0xc000033e4c, 0x0, 0xc000116f30, 0xc0000fd518, 0x0, 0x0)
/Users/elias/go-tip/src/syscall/syscall_bsd.go:129 +0x51 fp=0xc000033e10 sp=0xc000033dc0 pc=0x107b7b1
os.(*Process).wait(0xc00008d440, 0x1095e2e, 0xc0000fd518, 0x0)
/Users/elias/go-tip/src/os/exec_unix.go:38 +0x7b fp=0xc000033e80 sp=0xc000033e10 pc=0x109af2b
os.(*Process).Wait(0xc00008d440, 0xc000033fb0, 0x10, 0x11d1f00)
/Users/elias/go-tip/src/os/exec.go:125 +0x2b fp=0xc000033eb0 sp=0xc000033e80 pc=0x109a47b
os/exec.(*Cmd).Wait(0xc0000b1ce0, 0xc000033f90, 0x11394df)
/Users/elias/go-tip/src/os/exec/exec.go:463 +0x5b fp=0xc000033f28 sp=0xc000033eb0 pc=0x1136f0b
main.startDebugBridge.func1(0xc0000b1ce0, 0xc0000b8ae0, 0xc0000e2a80)
/Users/elias/go-tip/misc/ios/go_darwin_arm_exec.go:314 +0x40 fp=0xc000033fc8 sp=0xc000033f28 pc=0x11a1980
runtime.goexit()
/Users/elias/go-tip/src/runtime/asm_amd64.s:1360 +0x1 fp=0xc000033fd0 sp=0xc000033fc8 pc=0x10565a1
created by main.startDebugBridge
/Users/elias/go-tip/misc/ios/go_darwin_arm_exec.go:313 +0x15f
...
After:
$ GOARCH=arm64 go test forever_test.go
lldb: running program
=== RUN TestForever
SIGQUIT: quit
PC=0x100144e24 m=0 sigcode=0
...
goroutine 19 [select (no cases)]:
command-line-arguments.TestForever(0x1300b60f0)
/Users/elias/go-tip/src/forever_test.go:6 +0x18
testing.tRunner(0x1300b60f0, 0x100211aa0)
/Users/elias/go-tip/src/testing/testing.go:795 +0xa8
created by testing.(*T).Run
/Users/elias/go-tip/src/testing/testing.go:840 +0x22c
...
Change-Id: I6b3cf1662d07a43ade0530842733b0944bee1ace
Reviewed-on: https://go-review.googlesource.com/112676
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
Add more information to misc/android/README for developing
arm and arm64 with an Android environment.
Change-Id: I0c88996b6ab0c41946a2c7e69e9c92ec7bb3be27
Reviewed-on: https://go-review.googlesource.com/112276
Reviewed-by: Elias Naur <elias.naur@gmail.com>
The idevicedebugserverproxy command takes a port number without a
flag, like so:
idevicedebugserverproxy 3222
If the -u <device_id> flag is added afterwards, it is ignored and
the command use an arbitrary device. Instead, always inject the -u
flag before any other idevice command arguments.
While here, also kill any leftover idevicedebugserverproxy instance
previous (failed) runs might have left running.
Change-Id: I0bf06ed1a20ef225abeca183f9ba8f396662d435
Reviewed-on: https://go-review.googlesource.com/112216
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Now that the iOS exec wrapper uninstalls any existing test app before
installing a new, looking up the device app path might fail. Before,
the lookup always succeeded (even though the path reported might be
stale).
For the iOS builder.
Change-Id: I5667b6fae15f88745bdee796db219a429a26e203
Reviewed-on: https://go-review.googlesource.com/112075
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
Tests can fail because there is leftover data from a previous run.
For example:
--- FAIL: TestRemoveAll (0.00s)
path_test.go:96: RemoveAll "/private/var/mobile/Containers/Data/Application/66247524-5ED7-45A4-82AA-6BF15D6078B2/tmp//_TestRemoveAll_" (first): open /private/var/mobile/Containers/Data/Application/66247524-5ED7-45A4-82AA-6BF15D6078B2/tmp//_TestRemoveAll_/dir: permission denied
FAIL
FAIL os 31.275s
There seem to be no way to simply clear the app data for an app
short of uninstalling it, so do that.
This change in effect undoes CL 106676, which means that running iOS
is a little slower again, and that another app from the same
apple developer account must be present on the device for our app
install to succeed.
Change-Id: Iacc3a6f95c93568f4418db45e1098c7c7fdb88e0
Reviewed-on: https://go-review.googlesource.com/111795
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
It turns out that a non-empty result from ideviceimagemounter does
not mean an image is mounted. Use ideviceimagemounter's xml output
mode to improve the check.
Also, iOS versions are reported as major.minor or major.minor.patch.
Developer images are only specific to major.minor version, so cut
off the patch number in the search, if present.
Change-Id: Ia182e6f4655b7e6aa6feb8005cd3b533535b73cd
Reviewed-on: https://go-review.googlesource.com/111235
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
This commit adds the syscall/js package, which is used by the wasm
architecture to access the WebAssembly host environment (and the
operating system through it). Currently, web browsers and Node.js
are supported hosts, which is why the API is based on JavaScript APIs.
There is no common API standardized in the WebAssembly ecosystem yet.
This package is experimental. Its current scope is only to allow
tests to run, but not yet to provide a comprehensive API for users.
Updates #18892
Change-Id: I236ea10a70d95cdd50562212f2c18c3db5009230
Reviewed-on: https://go-review.googlesource.com/109195
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Sometimes, a newly installed the test app is not ready to launch
or the reported app path is stale. Pause and retry the launch if
the lldb script did not run the program.
Change-Id: Ic7745d4b5a02f2e3cb8134341859039812f65a65
Reviewed-on: https://go-review.googlesource.com/111216
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
log.Fatal exits the process and doesn't allow deferred functions
to run. Extract log.Fatal calls to main where all deferred functions
have completed.
For the iOS builder.
Change-Id: Id1ef9955bed19944a819d6137a611d6ecbe624a6
Reviewed-on: https://go-review.googlesource.com/110955
Run-TryBot: Elias Naur <elias.naur@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Sometimes ideviceinstaller fails to install the app. Retry a few
times before giving up.
For the iOS builder.
Change-Id: Ib066ffd4f97ae8d22c0fa9a78ea4d04f67c17410
Reviewed-on: https://go-review.googlesource.com/111055
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
If TMPDIR is not set, the iOS runtime will automatically set TMPDIR
to a valid app temporary path.
For the iOS builders.
Change-Id: Ia82404059dcb10678f0a6e0c96d5efc79a5485fd
Reviewed-on: https://go-review.googlesource.com/110956
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Fixes#25143
Change-Id: Ide654fe70651fda827cdeeaaa73d2a1f8aefd7e7
Reviewed-on: https://go-review.googlesource.com/110159
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The iOS exec wrapper uses ios-deploy to set up a device, install
the wrapped app, and start a lldb session to run it. ios-deploy is
not built to be scripted, as can be seen from the brittle way it is
driven by the Go wrapper. There are many timeouts and comments such
as
"
// lldb tries to be clever with terminals.
// So we wrap it in script(1) and be clever
// right back at it.
"
This CL replaces the use of ios-deploy with a lldb driver script in
Python. lldb is designed to be scripted, so apart from getting rid
of the ios-deploy dependency, we gain:
- No timouts and scripting ios-deploy through stdin and parsing
stdout for responses.
- Accurate exit codes.
- Prompt exits when the wrapped binary fails for some reason. Before,
the go test timeout would kick in to fail the test.
- Support for environment variables.
- No noise in the test output. Only the test binary output is output
from the wrapper.
We have to do more work with the lldb driver: mounting the developer
image on the device, running idevicedebugserverproxy and installing
the app. Even so, the CL removes almost as many lines as it adds.
Furthermore, having the steps split up helps to tell setup errors
from runtime errors.
Change-Id: I48cccc32f475d17987283b2c93aacc3da18fe339
Reviewed-on: https://go-review.googlesource.com/107337
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Return a non-zero exit code if the WebAssembly host fails to compile
the WebAssmbly bytecode to machine code.
Change-Id: I774309db2872b6a2de77a1b0392608058414160d
Reviewed-on: https://go-review.googlesource.com/110097
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The test has been flaky, probably due to EAGAIN, but let's find out
for sure.
Updates #25078
Change-Id: I5a5b14bfc52cb43f25f07ca7d207b61ae9d4f944
Reviewed-on: https://go-review.googlesource.com/109359
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
If X depends on Y and X was installed but Y is only present in the cache
(as happens when you "go install X") then we should report X as up-to-date,
not as stale.
This applies whether X is a package or a main binary.
Fixes#24558.
Fixes#23818.
Change-Id: I26a0b375b1f7f7ac909cc0db68e92f4e04529208
Reviewed-on: https://go-review.googlesource.com/107957
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
We were using absolute paths in the #line directives in the export
header file. This makes the header file change if you move GOPATH.
The absolute paths aren't helpful for the final user, which is some C
program elsewhere.
Fixes#24945
Change-Id: I2da32c9b477df578bd5087435a03fe97abe462e3
Reviewed-on: https://go-review.googlesource.com/108315
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We were using file descriptor 100, which requires the Linux kernel to
grow the fdtable size. That step may sometimes require a long time,
causing the test to fail. Switch to file descriptor 30, which should
not require growing the fdtable.
Fixes#23784
Change-Id: I3ac40d6f8569c70d34b470cfca34eff149bf8229
Reviewed-on: https://go-review.googlesource.com/108537
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
First, take the exclusive lock that ensures only one running binary
later: after assembling the gotest.app directory and signing it.
Second, don't pass -r to ios-deploy. The -r flag uninstalls the
app before installing it. It seems unnecessary, takes extra time
and if there was only the one developer app on the phone, it
will drop the developer permission on uninstall.
Change-Id: Ia222d3e5c2e1e2285f53074eb952941fd45fadd9
Reviewed-on: https://go-review.googlesource.com/106676
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
CL 106096 changed the iOS exec wrapper to directly run the binary
without waiting for a SIGINT signal, but did so in a way that
expects a "(lldb)" response from lldb in 2 seconds. Lldb might
not out output anything until the program finishes, so change the
exec wrapper to just fire and forget the the run command and go
straight to waiting for exit, successfully or otherwise.
Change-Id: I6a2dc63f9b29fe44edb3591afb048b9a8e2e0822
Reviewed-on: https://go-review.googlesource.com/106176
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
To enable the exec wrapper go_darwin_arm_exec.go to run binaries
on iOS devices, the GOIOS_DEV_ID variable needs to be set to a code
signing identity. The program detect.go attempts to detect suitable
values for GOIOS_DEV_ID (along with GOIOS_APP_ID and GOIOS_TEAM_ID).
Before this change, detect.go would use "security find-identity
-p codesigning -v" to list all available identities for code signing
and pick the first one with "iPhone Developer" in its name. However,
that pick might be invalid since if it was replaced by an identity
issued later.
For example, on the mobile builder:
$ security find-identity -p codesigning -v
1) 0E251DE41FE4490574E475AC320B47F58D6D3635 "lldb_codesign"
2) 0358588D07AA6A19478981BA405F40A97F95F187 "iPhone Developer: xxx@xxx (2754T98W8E)"
3) FC6D96F24A3223C98BF7A2C2C5194D82E04CD23E "iPhone Developer: xxx@xxx (2754T98W8E)"
3 valid identities found
In this case, the identity 0358588D07AA6A19478981BA405F40A97F95F187
is picked by detect.go even though it has been invalidated by
FC6D96F24A3223C98BF7A2C2C5194D82E04CD23E.
Instead of attempting to find an identity from the "security
find-identity" list, use the identity from the CommonName in the
embedded certificate in the provisioning file. The CommonName only
lists the identity name (iPhone Developer: xxx@xxx (2754T98W8E)),
not the fingerprint (FC6D96F24A3223C98BF7A2C2C5194D82E04CD23E), but
fortunately the codesign tool accepts both.
Identity names may not be unique, as demonstrated by the example,
but that will result in an ambiguity error at codesigning instead of
a more obscure error about an invalid identity when
go_darwin_arm_exec.go runs a binary.
The fix is then to delete the invalid identity from the system
keychain.
While here, find all connected devices instead of the first connected
and only consider provision files that covers them all. This matters
for the mobile builder where two devices are connected.
Change-Id: I6beb59ace3fc5e071ba76222a20a607765943989
Reviewed-on: https://go-review.googlesource.com/105436
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
Once upon a time, the iOS exec wrapper needed to change the current
working directory for the binary being tested. To allow that, the
runtime raised a SIGINT signal that the wrapper caught, changed the
working directory and resumed the process.
These days, the current working directory is passed from the wrapper
to the runtime through a special entry in the app metadata and the
SIGINT handshake is not necessary anymore.
Remove the signaling from the runtime and the exec harness.
Change-Id: Ia53bcc9e4724d2ca00207e22b91ce80a05271b55
Reviewed-on: https://go-review.googlesource.com/106096
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
This commit adds scripts for running the WebAssembly binaries that the
Go compiler will produce.
The script go_js_wasm_exec uses Node.js to run the binaries. Adding it
to PATH will enable "go run" and "go test" to work for js/wasm
without having to manually provide the -exec flag.
See https://golang.org/cmd/go/#hdr-Compile_and_run_Go_program
for more information.
The web page wasm_exec.html is an example on how to run the same
binaries in a web browser.
Both scripts use wasm_exec.js as a shared library.
Updates #18892
Change-Id: Ia4d9bea025957750baa0d0651243dc88f156f85d
Reviewed-on: https://go-review.googlesource.com/103255
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Fixes#14327
Much of the code is based on the linux/amd64 code that implements these
build modes, and code is shared where possible.
Change-Id: Ia510f2023768c0edbc863aebc585929ec593b332
Reviewed-on: https://go-review.googlesource.com/93875
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When there are plugins, there may not be a unique copy of runtime
functions like goexit, mcall, etc. So identifying them by entry
address is problematic. Instead, keep track of each special function
using a field in the symbol table. That way, multiple copies of
the same runtime function will be treated identically.
Fixes#24351Fixes#23133
Change-Id: Iea3232df8a6af68509769d9ca618f530cc0f84fd
Reviewed-on: https://go-review.googlesource.com/100739
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
bytes.IndexByte is heavily optimized. Use it in findnull.
This is second attempt, similar to CL97523.
In this version we never call IndexByte on region of memory,
that crosses page boundary. A bit slower than CL97523,
but still fast:
name old time/op new time/op delta
GoString-6 164ns ± 2% 118ns ± 0% -28.00% (p=0.000 n=10+6)
findnull is also used in gostringnocopy,
which is used in many hot spots in the runtime.
Fixes#23830
Change-Id: Id843dd4f65a34309d92bdd8df229e484d26b0cb2
Reviewed-on: https://go-review.googlesource.com/98015
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This reverts commit 7365fac2db.
Reason for revert: breaks the build on some architectures, reading unmapped pages?
Change-Id: I3a8c02dc0b649269faacea79ecd8213defa97c54
Reviewed-on: https://go-review.googlesource.com/97995
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
bytes.IndexByte is heavily optimized.
Use it in findnull.
name old time/op new time/op delta
GoString-8 65.5ns ± 1% 40.2ns ± 1% -38.62% (p=0.000 n=19+19)
findnull is also used in gostringnocopy,
which is used in many hot spots in the runtime.
Fixes#23830
Change-Id: I2e6cb279c7d8078f8844065de684cc3567fe89d7
Reviewed-on: https://go-review.googlesource.com/97523
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Increase the sleep and wait for up to 2 seconds for the dup2.
Apparently it can sometimes take a long time.
Fixes#23784
Change-Id: I929530b057bbcd842b28a7640c39dd68d719ff7d
Reviewed-on: https://go-review.googlesource.com/93895
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
iana.org, www.iana.org and data.iana.org all present a valid TLS
certificate, so let's use it when fetching data or linking to
resources to avoid errors in transit.
Change-Id: Ib3ce7c19789c4e9d982a776b61d8380ddc63194d
Reviewed-on: https://go-review.googlesource.com/89416
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This replaces frame size -4/-8 with the NOFRAME flag in mips and
mips64 assembly.
This was automated with:
sed -i -e 's/\(^TEXT.*[A-Z]\),\( *\)\$-[84]/\1|NOFRAME,\2$0/' $(find -name '*_mips*.s')
Plus a manual fix to mkduff.go.
The go binary is identical on both architectures before and after this
change.
Change-Id: I0310384d1a584118c41d1cd3a042bb8ea7227efb
Reviewed-on: https://go-review.googlesource.com/92044
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This replaces frame size -8 with the NOFRAME flag in arm64 assembly.
This was automated with:
sed -i -e 's/\(^TEXT.*[A-Z]\),\( *\)\$-8/\1|NOFRAME,\2$0/' $(find -name '*_arm64.s')
Plus a manual fix to mkduff.go.
The go binary is identical before and after this change.
Change-Id: I0310384d1a584118c41d1cd3a042bb8ea7227efa
Reviewed-on: https://go-review.googlesource.com/92043
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This replaces frame size -4 with the NOFRAME flag in arm assembly.
This was automated with:
sed -i -e 's/\(^TEXT.*[A-Z]\),\( *\)\$-4/\1|NOFRAME,\2$0/' $(find -name '*_arm.s')
Plus three manual comment changes found by:
grep '\$-4' $(find -name '*_arm.s')
The go binary is identical before and after this change.
Change-Id: I0310384d1a584118c41d1cd3a042bb8ea7227ef9
Reviewed-on: https://go-review.googlesource.com/92042
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Both gcc and clang accept an option -fplugin=code.so to load
a plugin from the ELF shared object file code.so.
Obviously that plugin can then do anything it wants
during the build. This is contrary to the goal of "go get"
never running untrusted code during the build.
(What happens if you choose to run the result of
the build is your responsibility.)
Disallow this behavior by only allowing a small set of
known command-line flags in #cgo CFLAGS directives
(and #cgo LDFLAGS, etc).
The new restrictions can be adjusted by the environment
variables CGO_CFLAGS_ALLOW, CGO_CFLAGS_DISALLOW,
and so on. See the documentation.
In addition to excluding cgo-defined flags, we also have to
make sure that when we pass file names on the command
line, they don't look like flags. So we now refuse to build
packages containing suspicious file names like -x.go.
A wrinkle in all this is that GNU binutils uniformly accept
@foo on the command line to mean "if the file foo exists,
then substitute its contents for @foo in the command line".
So we must also reject @x.go, flags and flag arguments
beginning with @, and so on.
Fixes#23672, CVE-2018-6574.
Change-Id: I59e7c1355155c335a5c5ae0d2cf8fa7aa313940a
Reviewed-on: https://team-review.git.corp.google.com/209949
Reviewed-by: Ian Lance Taylor <iant@google.com>
CL 49490 fixed a warning when compiling the C code generated by cgo,
but it introduced typedef conflicts in Go code that cgo is supposed to
avoid.
Original CL description:
cmd/cgo: fix for function taking pointer typedef
Fixes#19832
Updates #19832Fixes#23720
Change-Id: I22a732db31be0b4f7248c105277ab8ee44ef6cfb
Reviewed-on: https://go-review.googlesource.com/92455
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
The dlopen function returns an opaque handle, and it is possible for
it to look like a Go pointer, causing garbage collector and cgo
confusion.
Fixes#23663
Change-Id: Id080e2bbcee8cfa7ac4a457a927f96949eb913f8
Reviewed-on: https://go-review.googlesource.com/91596
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Introduce GOANDROID_ADB_FLAGS for additional flags to adb invocations.
With GOANDROID_ADG_FLAGS, the Android builders can distinguish between
emulator and device builds.
Change-Id: I11729926a523ee27f6a3795cb2cfb64a9454f0a5
Reviewed-on: https://go-review.googlesource.com/88795
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
The cgo checker was issuing an error with cgocheck=2 when a timer
bucket was stored in a pollDesc. The pollDesc values are allocated
using persistentalloc, so they are not in the Go heap. The code is OK
since timer bucket pointers point into a global array, and as such are
never garbage collected or moved.
Mark timersBucket notinheap to avoid the problem. timersBucket values
only occur in the global timers array.
Fixes#23435
Change-Id: I835f31caafd54cdacc692db5989de63bb49e7697
Reviewed-on: https://go-review.googlesource.com/87637
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
After CL 69831, addTransitiveLinkDeps ensures that all dependencies of
a link appear in Deps. We no longer need to traverse through all
actions to find them. And the old scheme of looking through all the
actions and assuming we would see shared library actions before
libraries they depend on no longer works.
Now that we have complete deps, change to a simpler scheme in which we
find the shared libraries in the deps, and then use that to sort the
deps into archives and shared libraries.
Fixes#22224
Change-Id: I14fcc773ac59b6f5c2965cc04d4ed962442cc89e
Reviewed-on: https://go-review.googlesource.com/87497
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The jobject type is declared as a pointer, but some JVMs
(Dalvik, ART) store non-pointer values in them. In Go, we must
use uintptr instead of a real pointer for these types.
This is similar to the CoreFoundation types on Darwin which
were "fixed" in CL 66332.
Update #22906
Update #21897
RELNOTE=yes
Change-Id: I0d4c664501d89a696c2fb037c995503caabf8911
Reviewed-on: https://go-review.googlesource.com/81876
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixed by CL 76025 yesterday, without realizing it:
the testshared and testplugin builds of separate iface_i
packages were colliding incorrectly in the cache.
Including the build directory fixes that.
Fixes#22571.
Change-Id: Id8193781c67c3150823dc1f48eae781dfe3702fb
Reviewed-on: https://go-review.googlesource.com/76371
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
The iOS test harness dumps the output of its lldb session to stdout,
but only if the lldb session was successfully started.
Make sure the log is always dumpede, so that lldb startup failures
such as
lldb setup error: exited (lldb start: exit status 253)
can be diagnosed.
For the iOS builders.
Change-Id: Ie0e3341dd8f84a88d26509c34816668d3ebbfaa0
Reviewed-on: https://go-review.googlesource.com/76195
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
This reverts commit 08f19bbde1.
Reason for revert:
The changed transformation takes effect on a larger set
of code snippets than expected.
For example, this:
func foo() {
// Comment
bar()
}
becomes:
func foo() {
// Comment
bar()
}
This is an unintended consequence.
Change-Id: Ifca88d6267dab8a8170791f7205124712bf8ace8
Reviewed-on: https://go-review.googlesource.com/81335
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Joe Tsai <joetsai@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Some C types are declared as pointers, but C code
stores non-pointers in them. When the Go garbage
collector sees such a pointer, it gets unhappy.
Instead, for these types represent them on the Go
side with uintptr.
We need this change to handle Apple's CoreFoundation
CF*Ref types. Users of these types might need to
update their code like we do in root_cgo_darwin.go.
The only change that is required under normal
circumstances is converting some nils to 0.
A go fix module is provided to help.
Fixes#21897
RELNOTE=yes
Change-Id: I9716cfb255dc918792625f42952aa171cd31ec1b
Reviewed-on: https://go-review.googlesource.com/66332
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
(The tests only run when swig is already installed on the local system.)
Change-Id: I172d106a68cfc746a1058f5a4bcf6761bab88912
Reviewed-on: https://go-review.googlesource.com/78175
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Permit the C preamble to use the _GoString_ type. Permit Go code to
pass string values directly to those C types. Add accessors for C
code to retrieve sizes and pointers.
Fixes#6907
Change-Id: I190c88319ec88a3ef0ddb99f342a843ba69fcaa3
Reviewed-on: https://go-review.googlesource.com/70890
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Also, with this change, error locations don't print absolute positions
in [] brackets following positions relative to line directives. To get
the absolute positions as well, specify the -L flag.
Fixes#22660.
Change-Id: I9ecfa254f053defba9c802222874155fa12fee2c
Reviewed-on: https://go-review.googlesource.com/77090
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The go repository contains a mix of github.com/golang/go/issues/xxxxx
and golang.org/issues/xxxxx URLs for references to issues in the issue
tracker. We should use one for consistency, and golang.org is preferred
in case the project moves the issue tracker in the future.
This reasoning is taken from a comment Sam Whited left on a CL I
recently opened: https://go-review.googlesource.com/c/go/+/73890.
In that CL I referenced an issue using its github.com URL, because other
tests in the file I was changing contained references to issues using
their github.com URL. Sam Whited left a comment on the CL stating I
should change it to the golang.org URL.
If new code is intended to reference issues via golang.org and not
github.com, existing code should be updated so that precedence exists
for contributors who are looking at the existing code as a guide for the
code they should write.
Change-Id: I3b9053fe38a1c56fc101a8b7fd7b8f310ba29724
Reviewed-on: https://go-review.googlesource.com/75673
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This CL makes "go install" behave the way many users expect:
install only the things named on the command line.
Future builds still run as fast, thanks to the new build cache (CL 75473).
To install dependencies as well (the old behavior), use "go install -i".
Actual definitions aside, what most users know and expect of "go install"
is that (1) it installs what you asked, and (2) it's fast, unlike "go build".
It was fast because it installed dependencies, but installing dependencies
confused users repeatedly (see for example #5065, #6424, #10998, #12329,
"go build" and "go test" so that they could be "fast" too, but that only
created new opportunities for confusion. We also had to add -installsuffix
and then -pkgdir, to allow "fast" even when dependencies could not be
installed in the usual place.
The recent introduction of precise content-based staleness logic means that
the go command detects the need for rebuilding packages more often than it
used to, with the consequence that "go install" rebuilds and reinstalls
dependencies more than it used to. This will create more new opportunities
for confusion and will certainly lead to more issues filed like the ones
listed above.
CL 75743 introduced a build cache, separate from the install locations.
That cache makes all operations equally incremental and fast, whether or
not the operation is "install" or "build", and whether or not "-i" is used.
Installing dependencies is no longer necessary for speed, it has confused
users in the past, and the more accurate rebuilds mean that it will confuse
users even more often in the future. This CL aims to end all that confusion
by not installing dependencies by default.
By analogy with "go build -i" and "go test -i", which still install
dependencies, this CL introduces "go install -i", which installs
dependencies in addition to the things named on the command line.
Fixes#5065.
Fixes#6424.
Fixes#10998.
Fixes#12329.
Fixes#18981.
Fixes#22469.
Another step toward #4719.
Change-Id: I3d7bc145c3a680e2f26416e182fa0dcf1e2a15e5
Reviewed-on: https://go-review.googlesource.com/75850
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This CL adds an automatic, limited "go vet" to "go test".
If the building of a test package fails, vet is not run.
If vet fails, the test is not run.
The goal is that users don't notice vet as part of the "go test"
process at all, until vet speaks up and says something important.
This should help users find real problems in their code faster
(vet can just point to them instead of needing to debug a
test failure) and expands the scope of what kinds of things
vet can help with.
The "go vet" runs in parallel with the linking of the test binary,
so for incremental builds it typically does not slow the overall
"go test" at all: there's spare machine capacity during the link.
all.bash has less spare machine capacity. This CL increases
the time for all.bash on my laptop from 4m41s to 4m48s (+2.5%)
To opt out for a given run, use "go test -vet=off".
The vet checks used during "go test" are a subset of the full set,
restricted to ones that are 100% correct and therefore acceptable
to make mandatory. In this CL, that set is atomic, bool, buildtags,
nilfunc, and printf. Including printf is debatable, but I want to
include it for now and find out what needs to be scaled back.
(It already found one real problem in package os's tests that
previous go vet os had not turned up.)
Now that we can rely on type information it may be that printf
should make its function-name-based heuristic less aggressive
and have a whitelist of known print/printf functions.
Determining the exact set for Go 1.10 is #18085.
Running vet also means that programs now have to type-check
with both cmd/compile and go/types in order to pass "go test".
We don't start vet until cmd/compile has built the test package,
so normally the added go/types check doesn't find anything.
However, there is at least one instance where go/types is more
precise than cmd/compile: declared and not used errors involving
variables captured into closures.
This CL includes a printf fix to os/os_test.go and many declared
and not used fixes in the race detector tests.
Fixes#18084.
Change-Id: I353e00b9d1f9fec540c7557db5653e7501f5e1c9
Reviewed-on: https://go-review.googlesource.com/74356
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This CL adds caching of successful test results, keyed by the
action ID of the test binary and its command line arguments.
Suppose you run:
go test -short std
<edit a typo in a comment in math/big/float.go>
go test -short std
Before this CL, the second go test would re-run all the tests
for the std packages. Now, the second go test will use the cached
result immediately (without any compile or link steps) for any
packages that do not transitively import math/big, and then
it will, after compiling math/big and seeing that the .a file didn't
change, reuse the cached test results for the remaining packages
without any additional compile or link steps.
Suppose that instead of editing a typo you made a substantive
change to one function, but you left the others (including their
line numbers) unchanged. Then the second go test will re-link
any of the tests that transitively depend on math/big, but it still
will not re-run the tests, because the link will result in the same
test binary as the first run.
The only cacheable test arguments are:
-cpu
-list
-parallel
-run
-short
-v
Using any other test flag disables the cache for that run.
The suggested argument to mean "turn off the cache" is -count=1
(asking "please run this 1 time, not 0").
There's an open question about re-running tests when inputs
like environment variables and input files change. For now we
will assume that users will bypass the test cache when they
need to do so, using -count=1 or "go test" with no arguments.
This CL documents the new cache but also documents the
previously-undocumented distinction between "go test" with
no arguments (now called "local directory mode") and with
arguments (now called "package list mode"). It also cleans up
a minor detail of package list mode buffering that used to change
whether test binary stderr was sent to go command stderr based
on details like exactly how many packages were listed or
how many CPUs the host system had. Clearly the file descriptor
receiving output should not depend on those, so package list mode
now consistently merges all output to stdout, where before it
mostly did that but not always.
Fixes#11193.
Change-Id: I120edef347b9ddd5b10e247bfd5bd768db9c2182
Reviewed-on: https://go-review.googlesource.com/75631
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
To improve readability when exported fields are removed,
forbid the printer from emitting an empty line before the first comment
in a const, var, or type block.
Also, when printing the "Has filtered or unexported fields." message,
add an empty line before it to separate the message from the struct
or interfact contents.
Before the change:
<<<
type NamedArg struct {
// Name is the name of the parameter placeholder.
//
// If empty, the ordinal position in the argument list will be
// used.
//
// Name must omit any symbol prefix.
Name string
// Value is the value of the parameter.
// It may be assigned the same value types as the query
// arguments.
Value interface{}
// contains filtered or unexported fields
}
>>>
After the change:
<<<
type NamedArg struct {
// Name is the name of the parameter placeholder.
//
// If empty, the ordinal position in the argument list will be
// used.
//
// Name must omit any symbol prefix.
Name string
// Value is the value of the parameter.
// It may be assigned the same value types as the query
// arguments.
Value interface{}
// contains filtered or unexported fields
}
>>>
Fixes#18264
Change-Id: I9fe17ca39cf92fcdfea55064bd2eaa784ce48c88
Reviewed-on: https://go-review.googlesource.com/71990
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This cuts 6 seconds off all.bash with the new go command.
Not a ton, but also an easy 6 seconds to grab.
The -tags=use_go_run in the misc/cgo tests is just some
go command flag that will make run.go use go run,
but without making everything look stale.
(Those tests have relative imports,
so go tool compile+link is not enough.)
Change-Id: I43bf4bb661d3adde2b2d4aad5e8f64b97bc69ba9
Reviewed-on: https://go-review.googlesource.com/73994
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL changes the go command to base all its rebuilding decisions
on the content of the files being processed and not their file system
modification times. It also eliminates the special handling of release
toolchains, which were previously considered always up-to-date
because modification time order could not be trusted when unpacking
a pre-built release.
The go command previously tracked "build IDs" as a backup to
modification times, to catch changes not reflected in modification times.
For example, if you remove one .go file in a package with multiple .go
files, there is no modification time remaining in the system that indicates
that the installed package is out of date. The old build ID was the hash
of a list of file names and a few other factors, expected to change if
those factors changed.
This CL moves to using this kind of build ID as the only way to
detect staleness, making sure that the build ID hash includes all
possible factors that need to influence the rebuild decision.
One such factor is the compiler flags. As of this CL, if you run
go build -gcflags -N cmd/gofmt
you will get a gofmt where every package is built with -N,
regardless of what may or may not be installed already.
Another such factor is the linker flags. As of this CL, if you run
go install myprog
go install -ldflags=-s myprog
the second go install will now correctly build a new myprog with
the updated linker flags. (Previously the installed myprog appeared
up-to-date, because the ldflags were not included in the build ID.)
Because we have more precise information we can also validate whether
the target of a "go test -c" operation is already the right binary and
therefore can avoid a rebuild.
This CL sets us up for having a more general build artifact cache,
maybe even a step toward not having a pkg directory with .a files,
but this CL does not take that step. For now the result of go install
is the same as it ever was; we just do a better job of what needs to
be installed.
This CL does slow down builds a small amount by reading all the
dependent source files in full. (The go command already read the
beginning of every dependent source file to discover build tags
and imports.) On my MacBook Pro, before this CL all.bash takes
3m58s, while after this CL and a few optimizations stacked above it
all.bash takes 4m28s. Given that CL 73850 cut 1m43s off the all.bash
time earlier today, we can afford adding 30s back for now.
More optimizations are planned that should make the go command
more efficient than it was even before this CL.
Fixes#15799.
Fixes#18369.
Fixes#19340.
Fixes#21477.
Change-Id: I10d7ca0e31ca3f58aabb9b1f11e2e3d9d18f0bc9
Reviewed-on: https://go-review.googlesource.com/73212
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
The upcoming CL 73212 will see through mtime modifications.
Change the underlying file too.
Change-Id: Ib23b4136a62ee87bce408b76bb0385451ae7dcd2
Reviewed-on: https://go-review.googlesource.com/74130
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Both the linker and the plugin package were inconsistent
about when they applied the path encoding defined in
objabi.PathToPrefix. As a result, only some symbols from
a package path that required encoding were being found.
So always encoding the path.
Fixes#22295
Change-Id: Ife86c79ca20b2e9307008ed83885e193d32b7dc4
Reviewed-on: https://go-review.googlesource.com/72390
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Running test.bash goes from 30s to 10s on a linux workstation.
(The coming pkg cache work in cmd/go would presumably do the same thing,
but this makes all.bash faster today.)
Change-Id: I8c9b0400071a412fce55b386e939906bb1c1d84d
Reviewed-on: https://go-review.googlesource.com/72330
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Previously, cover printed directives (//go: comments) near the top of
the file unless they were in doc comments. However, directives
frequently apply to specific definitions, and they are not written in
doc comments to prevent godoc from printing them. Moving all
directives to the top of the file affected semantics of tests.
With this change, directives are kept together with the following
top-level declarations. Only directives that occur after all top-level
declarations are moved.
Fixes#22022
Change-Id: Ic5c61c4d3969996e4ed5abccba0989163789254c
Reviewed-on: https://go-review.googlesource.com/69630
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Alan Donovan <adonovan@google.com>
Currently we look to see if the main.main symbol address is in the
module data text range. This requires access to the main.main
symbol, which usually the runtime has, but does not when building
a plugin.
To avoid a dynamic relocation to main.main (which I haven't worked
out how to have the linker generate on darwin), stop using the
symbol. Instead record a boolean in the moduledata if the module
has the main function.
Fixes#22175
Change-Id: If313a118f17ab499d0a760bbc2519771ed654530
Reviewed-on: https://go-review.googlesource.com/69370
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Starting in gcc 6, -pie is passed to the linker by default
on some platforms, including ppc64le. If the objects
being linked are not built for -pie then in some cases the
executable could be in error. To avoid that problem, -no-pie
should be used with gcc to override the default -pie option
and generate a correct executable that can be run without error.
Fixes#22126
Change-Id: I4a052bba8b9b3bd6706f5d27ca9a7cebcb504c95
Reviewed-on: https://go-review.googlesource.com/70072
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL does a few things.
1. It moves the existing "read a build ID" code out of the go command
and into cmd/internal/buildid.
2. It adds new code there to "write a build ID".
3. It adds better tests.
4. It encapsulates cmd/internal/buildid into a new standalone program
"go tool buildid".
The go command is going to use the new "write a build ID" functionality
in a future CL. Adding the separate "go tool buildid" gives "go build -x"
a printable command to explain what it is doing in that new step.
(This is similar to the go command printing "go tool pack" commands
equivalent to the actions it is taking, even though it's not invoking pack
directly.) Keeping go build -x honest means that other build systems can
potentially keep up with the go command.
Change-Id: I01c0a66e30a80fa7254e3f2879283d3cd7aa03b4
Reviewed-on: https://go-review.googlesource.com/69053
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Everything got a bit tangled together in b.action1.
Try to tease things apart again.
In general this is a refactoring of the existing code, with limited
changes to the effect of the code.
The main additional change is to complete a.Deps for link actions.
That list now directly contains all the inputs the linker will attempt
to read, eliminating the need for a transitive traversal of the entire
action graph to find those. The comepleteness of a.Deps will be
important when we eventually use it to decide whether an cached
action output can be reused.
all.bash passes, but it's possible I've broken some subtety of
buildmode=shared again. Certainly that code took the longest
to get working.
Change-Id: I34e849eda446dca45a9cfce02b07bec6edb6d0d4
Reviewed-on: https://go-review.googlesource.com/69831
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Updates #11058
Change-Id: I2a8bf4403b680ab8bf06fff18291f3bf67261e27
Reviewed-on: https://go-review.googlesource.com/69090
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Otherwise we end up with testp?.exe files after the tests run.
Updates #11058
Change-Id: Ieccfc42da6192622bdab1f9a411ccd50bb59fd5b
Reviewed-on: https://go-review.googlesource.com/68770
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TestUnexportedSymbols requires dup2 that
my gcc installation does not have.
TestSignalHandlersWithNotify fails with:
undefined: syscall.SIGIO.
TestSignalHandlers fails with:
sched.h: No such file or directory.
TestExportedSymbolsWithDynamicLoad fails with:
dlfcn.h: No such file or directory.
Also add t.Helper calls to better error messages.
Updates #11058
Change-Id: I7eb514968464256b8337e45f57fcb7d7fe0e4693
Reviewed-on: https://go-review.googlesource.com/68410
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Moves type symbol name mangling out of the object reader
and into a separate pass. Requires some care, as changing
the name of a type may require dealing with duplicate
symbols for the first time.
Disables DWARF for both plugins and programs that use plugin.Open,
because type manging is currently incompatible with the go.info.*
symbol generator in cmd/link. (It relies on the symbol names to
find type information.) A future fix for this would be moving the
go.info.* generation into the compiler, with the logic we use
for generating the type.* symbols.
Fixes#19529
Change-Id: I75615f8bdda86ff9e767e536d9aa36e15c194098
Reviewed-on: https://go-review.googlesource.com/67312
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The lldb child process is killed if a test runs too long. Also
kill it when the setup times out (and is retried).
Might help with builder flakes where all 5 attempts to start up
lldb fail even though the tests before and after the timeouts
succeed. For example:
...
ok vendor/golang_org/x/net/route 37.797s
lldb setup error: command timeout (lldb start for 17s)
start timeout, trying again
lldb setup error: command timeout (lldb start for 17s)
start timeout, trying again
lldb setup error: command timeout (lldb start for 17s)
start timeout, trying again
lldb setup error: command timeout (lldb start for 17s)
start timeout, trying again
lldb setup error: command timeout (lldb start for 17s)
go_darwin_arm_exec: failed to start test harness (retry attempted)
FAIL vendor/golang_org/x/text/transform 115.185s
ok vendor/golang_org/x/text/unicode/norm 122.773s
...
Change-Id: I6638860522896491dccfa12f1e520c0f23df6d66
Reviewed-on: https://go-review.googlesource.com/67791
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is a step toward using cached build artifacts: the importcfg
will direct the compiler and linker to read them right from the cache
if necessary. However, this CL does not have a cache yet, so it still
reads them from the usual install location or build location.
Even so, this fixes a long-standing issue that -I and -L (no longer used)
are not expressive enough to describe complex GOPATH setups.
Shared libraries are handled enough that all.bash passes, but
there may still be more work to do here. If so, tests and fixes
can be added in follow-up CLs.
Gccgo will need updating to support -importcfg as well.
Fixes#14271.
Change-Id: I5c52a0a5df0ffbf7436e1130c74e9e24fceff80f
Reviewed-on: https://go-review.googlesource.com/56279
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When rewriting loads and stores accessing global variables to use the
GOT we were making use of REGTMP (R10). Unfortunately loads and stores
with large offsets (larger than 20-bits) were also using REGTMP,
causing it to be clobbered and subsequently a segmentation fault.
This can be fixed by using REGTMP2 (R11) for the rewrite. This is fine
because REGTMP2 only has a couple of uses in the assembler (division,
high multiplication and storage-to-storage instructions). We didn't
use REGTMP2 originally because it used to be used more frequently,
in particular for stores of constants to memory. However we have now
eliminated those uses.
This was found while writing a test case for CL 63030. That test case
is included in this CL.
Change-Id: I13956f1f3ca258a7c8a7ff0a7570d2848adf7f68
Reviewed-on: https://go-review.googlesource.com/65011
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It's not needed, and the current expectation is that it will go away
in the future.
Change-Id: I5f46800e748d9ffa484bda6d1738290c8e00ac2b
Reviewed-on: https://go-review.googlesource.com/63751
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
rune has a well-defined size, but C.int is implementation-specified.
Using one as the other should require an explicit conversion.
updates #13467
Change-Id: I53ab2478427dca790efdcc197f6b8d9fbfbd1847
Reviewed-on: https://go-review.googlesource.com/63730
Reviewed-by: Ian Lance Taylor <iant@golang.org>
I had passed 1 instead of 2 to the SplitAfterN call in
errorstest.check, so all of the cases were erroneously falling through
to the non-regexp case (and passing even if the actual error didn't
match).
Now, we use bytes.HasSuffix to check for the non-regexp case, so we
will not incorrectly match a regexp comment to the non-regexp case.
updates #13467
Change-Id: Ia6be928a495425f2b7bae5001bd01346e115dcfa
Reviewed-on: https://go-review.googlesource.com/63692
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This makes the test easier to run in isolation and easier to change,
and simplifies the code to run the tests in parallel.
updates #13467
Change-Id: I5622b5cc98276970347da18e95d071dbca3c5cc1
Reviewed-on: https://go-review.googlesource.com/63276
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Previously, test7978 failed if the user did not invoke it with
GOTRACEBACK=2 already set in their environment. Environment-sensitive
test are awkward, and in this case there is a very simple workaround:
set the traceback level to the necessary value explicitly.
Change-Id: I7d576f24138aa8a41392148eae11bbeaef558573
Reviewed-on: https://go-review.googlesource.com/63275
Run-TryBot: Bryan Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 62593 broken TestExportedSymbols and TestUnexportedSymbols
because it started executing android test binary on host.
Make them run on android.
Hopefully fixes android build.
Change-Id: Ic0bb9f0cbbefca23828574282caa33a03ef72431
Reviewed-on: https://go-review.googlesource.com/62830
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Elias Naur <elias.naur@gmail.com>
Change-Id: Ib35bb7fc9c5b4ccc9b8e1bd16443e0b307be9406
Reviewed-on: https://go-review.googlesource.com/62593
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fixes#21809
Change-Id: Ic43077c6bea3c7cdc9611e74abf07b6deab70433
Reviewed-on: https://go-review.googlesource.com/62670
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: Id1b5939cfcd210a0cb5f61915ce2d077c7fcec11
Reviewed-on: https://go-review.googlesource.com/62592
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The noopt builder sets GO_GCFLAGS when building the standard library.
Set it when building plugins to ensure the -shared packages built for it
have the same inlining in the export data (and thus the same package
version).
Tested locally with GO_GCFLAGS="-N -l" ./all.bash
Fixes#17937
Change-Id: Id037cfbf4af744c05c47bdc58eea60a5dba69533
Reviewed-on: https://go-review.googlesource.com/62511
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
1. remove broken verification
The runtime check assumes that no-pcln symbol entry have zero value,
but the linker emit no entries if the symbol is no-pcln.
As a result, if there are no-pcln symbols at the very end of pcln
table, it will panic.
2. correct condition of export
Handle special chracters in pluginpath correcty.
Export "go.itab.*", so different plugins can share the same itab.
Fixes#18190
Change-Id: Ia4f9c51d83ce8488a9470520f1ee9432802cfc1d
Reviewed-on: https://go-review.googlesource.com/61091
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Along the way, track bad modules. Make sure they don't end up on
the active modules list, and aren't accidentally reprocessed as
new plugins.
Fixes#19004
Change-Id: I8a5e7bb11f572f7b657a97d521a7f84822a35c07
Reviewed-on: https://go-review.googlesource.com/61171
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
It is common to have multiple plugins built from ephemeral
source files all with the same name:
# generate main.go
go build -buildmode=plugin -o=p1.so main.go
# rm main.go, generate new main.go
go build -buildmode=plugin -o=p2.so main.go
...
These different plugins currently have the same build ID,
and hence the same package path. This means only one can be
loaded.
To remove this restriction, this commit adds the contents of the
main package source files to the plugin hash.
Fixes#19358
Change-Id: Icd42024b085feb29c09c2771aaecb85f8b528dd3
Reviewed-on: https://go-review.googlesource.com/61170
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When compiling a plugin, package main gets a new name so as not to
conflict with the main package in the host binary, or any other
plugins. It is already defined by cmd/go, and used by cmd/link when
filling out the "" package placeholder in symbols.
With this CL, the plugin-specific name for main is also passed to
cmd/compile's -p flag. This is used to fill out the pkgpath field
of types, and ensures that two types defined in two different plugin
mains with the same name will not be mistaken for one another at
runtime.
Fixes#21386
Change-Id: I8a646d8d7451caff533fe0007343ea8b8e1704ed
Reviewed-on: https://go-review.googlesource.com/60910
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The approach of https://golang.org/cl/43476 turned out incorrect.
The problem is that the sniff introduced by the CL only work for simple
expression. And when it fails it fallback to uint64, not int64, which
breaks backward compatibility.
In this CL, we use DWARF for guessing kind instead. That should be more
reliable than previous approach. And importanly, it fallbacks to int64 even
if it fails to guess kind.
Fixes#21708
Change-Id: I39a18cb2efbe4faa9becdcf53d5ac68dba180d46
Reviewed-on: https://go-review.googlesource.com/60510
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently, cgo supports only macros which can be reduced to constants
or variables. The CL addresses remaining parts, macros which can be
represented as niladic functions.
The basic idea is simple:
1. make a thin wrapper function per macros.
2. replace macro expansions with function calls.
Fixes#10715Fixes#18720
Change-Id: I150b4fb48e9dc4cc34466ef6417c04ac93d4bc1a
Reviewed-on: https://go-review.googlesource.com/43970
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Current code uses names like "x" and "s" which can conflict with user's
code easily. Use cryptographic names.
Fixes#21668
Change-Id: Ib6d3d6327aa5b92d95c71503d42e3a79d96c8e15
Reviewed-on: https://go-review.googlesource.com/59710
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When running multiple iOS builds on the same host, GOIOS_DEVICE_ID
is used to distinguish the devices. To improve support,
- Only restart the particular device when invoking iostest.bash
with the -restart flag.
- Make the exec wrapper lock file per-device.
For the iOS builder.
Change-Id: Id6f222981f25036399a43c3202a393dba89d87cb
Reviewed-on: https://go-review.googlesource.com/57970
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Generated with
github.com/catapult/tracing/bin/vulcanize_trace_viewer
catapult @ ab4d571fa
Renamed trace_viewer_lean.html to trace_viewer_full.html
to make it clear we are using the full version of trace viewer
(waiting for https://github.com/catapult-project/catapult/issues/2247
to be fixed).
Update #15302
Change-Id: Ice808bb27ab79a1dec9fc863e0c5a761027ebfbe
Reviewed-on: https://go-review.googlesource.com/58750
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
If set, GOIOS_DEVICE_ID specifies the device id for the iOS exec
wrapper. With that, a single builder can host multiple iOS devices.
Change-Id: If3cc049552f5edbd7344befda7b8d7f73b4236e2
Reviewed-on: https://go-review.googlesource.com/57296
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: JBD <jbd@google.com>
Reviewed-by: Chris Broadfoot <cbro@golang.org>
This reverts commit a6ffab6b67.
Reason for revert: with CL 57290 the tests run on Android again.
Change-Id: Ifeb29762a4cd0178463acfeeb3696884d99d2993
Reviewed-on: https://go-review.googlesource.com/57310
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
The testcshared test.bash was rewritten in Go, but the rewritten script
broke on Android. Make the tests run on Android again by:
- Restoring the LD_LIBRARY_PATH path (.).
- Restoring the Android specific C flags (-pie -fuse-ld=gold).
- Adding runExe to run test executables. All other commands must run on
the host.
Fixes#21513.
Change-Id: I3ea617a943c686b15437cc5c118e9802a913d93a
Reviewed-on: https://go-review.googlesource.com/57290
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Hopefully this will fix android build.
Maybe fixes#21513
Change-Id: I98f760562646f06b56e385c36927e79458465b92
Reviewed-on: https://go-review.googlesource.com/56790
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Another attempt to fix build
Change-Id: I26137c115ad4b5f5a69801ed981c146adf6e824c
Reviewed-on: https://go-review.googlesource.com/56750
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Hopefully fixes build.
Change-Id: If0629b95b923a65e4507073cf7aa44a5e178fc0f
Reviewed-on: https://go-review.googlesource.com/56711
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
This makes it much easier to run individual failing subtests.
Use $(go env CC) instead of always defaulting to clang; this makes it
easier to test with other compilers.
Run C binaries to detect incompatible compiler/kernel pairings instead
of sniffing versions.
updates #21196
Change-Id: I0debb3cc4a4244df44b825157ffdc97b5c09338d
Reviewed-on: https://go-review.googlesource.com/52910
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When calling a Go function that returns multiple values from C, cgo
generates a structure to hold the values. According to the documentation
this structure is called `struct <function-name>_return`. When compiling
for gccgo the generated structure name is `struct <function-name>_result`.
This change updates the output for gccgo to match the documentation and
output for gc.
Fixes#20910
Change-Id: Iaea8030a695a7aaf9d9f317447fc05615d8e4adc
Reviewed-on: https://go-review.googlesource.com/49350
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This should fix NaCl build failure for CL 49530.
Change-Id: Id9a54f0c81b1b5db5b5efb12a2ad6509c4ab42b3
Reviewed-on: https://go-review.googlesource.com/55770
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Otherwise, some test flags don't work.
Change-Id: Iacf3930d0eec28e4d690cd382adbb2ecf866a0e2
Reviewed-on: https://go-review.googlesource.com/55615
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Just like https://golang.org/cl/34783
Given cgo.go:
1 package main
2
3 /*
4 long double x = 0;
5 */
6 import "C"
7
8 func main() {
9 _ = C.x
10 _ = C.x
11 }
Before:
./cgo.go:10:6: unexpected: 16-byte float type - long double
After:
./cgo.go:9:6: unexpected: 16-byte float type - long double
The above test case is not portable. So it is tested on only amd64.
Change-Id: If0b84cf73d381a22e2ada71c8e9a6e6ec77ffd2e
Reviewed-on: https://go-review.googlesource.com/54950
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The activeModules function is called by the cgo pointer checking code,
which is called by the write barrier (when GODEBUG=cgocheck=2), and as
such must be nosplit/nowritebarrier.
Fixes#21306
Change-Id: I57f2124f14de7f3872b2de9532abab15df95d45a
Reviewed-on: https://go-review.googlesource.com/53352
Reviewed-by: Austin Clements <austin@google.com>
Check not only that a tsan program can be built, but also that it runs.
This fails with some installations of GCC 7.
Skip the tsan10 program when using GCC, as it reportedly hangs.
This is a patch to help people build 1.9; we may be able to do a
better fix for 1.10.
Updates #21196
Change-Id: Icd1ffbd018dc65a97ff45cab1264b9b0c7fa0ab2
Reviewed-on: https://go-review.googlesource.com/52790
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Bryan Mills <bcmills@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
http://golang.org/cl/50251 fixed a regression under TSAN.
This change adds a minimal reproducer for the observed symptom.
Change-Id: Ib9ad01b458b7fdec14d6c2fe3c243f9c64b3dcf2
Reviewed-on: https://go-review.googlesource.com/50371
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
clang can emit some dwarf.VoidType which are wrapped by multiple
dwarf.TypedefType. We need to unwrap those before further processing.
Fixes#20129
Change-Id: I671ce6aef2dc7b55f1a02aec5f9789ac1b369643
Reviewed-on: https://go-review.googlesource.com/44772
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
With current GCC a macro that refers to another macro can report an
error on the macro definition line, with a note on the use.
When cgo is trying to decide which line an error refers to,
it is looking at the uses. So if we see an error on a line that we
don't recognize followed by a note on a line that we do recognize,
treat the note as an error.
Fixes#20125.
Change-Id: I389cd0eb7d56ad2d54bef70e278d9f76c4d36448
Reviewed-on: https://go-review.googlesource.com/44290
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Hiroshi Ioka <hirochachacha@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For test.go:
package main
import (
"C"
"fmt"
)
func main() {
fmt.Println("Hello, world!")
C.no_such_f()
}
Before:
could not determine kind of name for C.no_such_f
After:
./test.go:10:2: could not determine kind of name for C.no_such_f
Fixes#18452
Change-Id: I49c136b7fa60fab25d2d5b905d440fe4d106e565
Reviewed-on: https://go-review.googlesource.com/34783
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Current code cannot handle string #define macros if those macros are
defined via other macros. This CL solve the issue.
Updates #18720
Change-Id: Ibed0773d10db3d545bb246b97e81c0d19e3af3d5
Reviewed-on: https://go-review.googlesource.com/41312
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, cgo converts integer macros into int64 if it's possible.
As a result, some macros which satisfy
math.MaxInt64 < x <= math.MaxUint64
will lose their original values.
This CL introduces the new probe to check signs,
so we can handle signed ints and unsigned ints separately.
Fixes#20369
Change-Id: I002ba452a82514b3a87440960473676f842cc9ee
Reviewed-on: https://go-review.googlesource.com/43476
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In PPC64 ELF files, the st_other field indicates the number of
prologue instructions between the global and local entry points.
We add the instructions in the compiler and assembler if -shared is used.
We were assuming that the instructions were present when building a
c-archive or PIE or doing dynamic linking, on the assumption that those
are the cases where the go tool would be building with -shared.
That assumption fails when using some other tool, such as Bazel,
that does not necessarily use -shared in exactly the same way.
This CL records in the object file whether a symbol was compiled
with -shared (this will be the same for all symbols in a given compilation)
and uses that information when setting the st_other field.
Fixes#20290.
Change-Id: Ib2b77e16aef38824871102e3c244fcf04a86c6ea
Reviewed-on: https://go-review.googlesource.com/43051
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
On Android, the exec wrapper passes on output from adb to its parent
process by passing on os.Stderr and os.Stdout to adb. If the adb
process somehow hangs, it will keep stderr and stdout will open, in turn
blocking go test from ever returning from its cmd.Wait() even though
it has killed the exec wrapper process.
Break the short circuit by introducing a wrapper between adb and the
exec wrapper, preventing os/exec.Run from passing along the raw
file descriptors for os.Stdout and os.Stderr.
(Hopefully) fixes occasional indefinite hangs on the Android builder.
Change-Id: I1188211fbde79b4a66bf93ff8e9d0091abf34560
Reviewed-on: https://go-review.googlesource.com/42271
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The "lldb start" phase often times out on the iOS builder. Increase
the timeout and see if that helps.
Change-Id: I92fd67cbfa90659600e713198d6b2c5c78dde20f
Reviewed-on: https://go-review.googlesource.com/41863
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Here we restrict using cgo builtin references because internally they're go functions
as opposed to C usafe.Pointer values.
Fixes#18889
Change-Id: I1e4332e4884063ccbaf9772c172d4462ec8f3d13
Reviewed-on: https://go-review.googlesource.com/40934
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Previously the "ABI hash" for a package (used to determine if a loaded shared
library has the ABI expected by its loader) was the hash of the entire
__.PKGDEF file. But that means it depends on the build ID generated by the go
tool for the package, which means that if a file is added (even a .c or .h
file!) to the package, the ABI changes, perhaps uncessarily.
Fixes#19920
Change-Id: If919481e1a03afb350c8a9c7a0666bb90ee90270
Reviewed-on: https://go-review.googlesource.com/40401
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Some tests need the src/runtime/textflag.h file. Make sure it is
included in iOS test runs.
Change-Id: I5e0e7ebe85679686ef15a7d336f28ac9b68a587a
Reviewed-on: https://go-review.googlesource.com/40915
Run-TryBot: Elias Naur <elias.naur@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Prior to this CL, flags such as NOSPLIT
on ATEXT Progs were stored in From3.Offset.
Some but not all of those flags were also
duplicated into From.Sym.Attribute.
This CL migrates all of those flags into
From.Sym.Attribute and stops creating a From3.
A side-effect of this is that printing an
ATEXT Prog can no longer simply dump From3.Offset.
That's kind of good, since the raw flag value
wasn't very informative anyway, but it did
necessitate a bunch of updates to the cmd/asm tests.
The reason I'm doing this work now is that
avoiding storing flags in both From.Sym and From3.Offset
simplifies some other changes to fix the data
race first described in CL 40254.
This CL almost passes toolstash-check -all.
The only changes are in cases where the assembler
has decided that a function's flags may be altered,
e.g. to make a function with no calls in it NOSPLIT.
Prior to this CL, that information was not printed.
Sample before:
"".Ctz64 t=1 size=63 args=0x10 locals=0x0
0x0000 00000 (/Users/josh/go/tip/src/runtime/internal/sys/intrinsics.go:35) TEXT "".Ctz64(SB), $0-16
0x0000 00000 (/Users/josh/go/tip/src/runtime/internal/sys/intrinsics.go:35) FUNCDATA $0, gclocals·f207267fbf96a0178e8758c6e3e0ce28(SB)
Sample after:
"".Ctz64 t=1 nosplit size=63 args=0x10 locals=0x0
0x0000 00000 (/Users/josh/go/tip/src/runtime/internal/sys/intrinsics.go:35) TEXT "".Ctz64(SB), NOSPLIT, $0-16
0x0000 00000 (/Users/josh/go/tip/src/runtime/internal/sys/intrinsics.go:35) FUNCDATA $0, gclocals·f207267fbf96a0178e8758c6e3e0ce28(SB)
Observe the additional "nosplit" in the first line
and the additional "NOSPLIT" in the second line.
Updates #15756
Change-Id: I5c59bd8f3bdc7c780361f801d94a261f0aef3d13
Reviewed-on: https://go-review.googlesource.com/40495
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Prevent a crash if the same type in two plugins had a recursive
definition, either by referring to a pointer to itself or a map existing
with the type as a value type (which creates a recursive definition
through the overflow bucket type).
Fixes#19258
Change-Id: Iac1cbda4c5b6e8edd5e6859a4d5da3bad539a9c6
Reviewed-on: https://go-review.googlesource.com/40292
Run-TryBot: Todd Neal <todd@tneal.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
The hardware divider is an optional component of ARMv7. This patch
detects whether it is available in runtime and use it or not.
1. The hardware divider is detected at startup and a flag is set/clear
according to a perticular bit of runtime.hwcap.
2. Each call of runtime.udiv will check this flag and decide if
use the hardware division instruction.
A rough test shows the performance improves 40-50% for ARMv7. And
the compatibility of ARMv5/v6 is not broken.
fixes#19118
Change-Id: Ic586bc9659ebc169553ca2004d2bdb721df823ac
Reviewed-on: https://go-review.googlesource.com/37496
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Current code doesn't support floating point #define macros.
This CL compiles floats to a object file and retrive values from it.
That approach is the same work as we've already done for integers.
Updates #18720
Change-Id: I88b7ab174d0f73bda975cf90c5aeb797961fe034
Reviewed-on: https://go-review.googlesource.com/35511
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Without this, the load fails during kernel exec, which results in the
mysterious and completely uninformative "Killed: 9" error.
It appears that the stars (or at least the inputs) were properly aligned
with earlier versions of Xcode so that this happened accidentally.
Make it happen on purpose.
Gregory Man bisected the breakage to this change in LLVM,
which fits the theory nicely:
https://github.com/llvm-mirror/llvm/commit/9a41e59cFixes#19734.
Change-Id: Ice67a09af2de29d3c0d5e3fcde6a769580897c95
Reviewed-on: https://go-review.googlesource.com/38854
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The gold linker is used by default in the Android NDK, except on
arm64:
https://github.com/android-ndk/ndk/issues/148
The Go linker already forces the use of the gold linker on arm and
arm64 (CL 22141) for other reasons. However, the test.bash script in
testcshared doesn't, resulting in linker errors on android/arm64:
warning: liblog.so, needed by ./libgo.so, not found (try using -rpath or
-rpath-link)
Add -fuse-ld=gold when running testcshared on Android. Fixes the
android/arm64 builder.
Change-Id: I35ca96f01f136bae72bec56d71b7ca3f344df1ed
Reviewed-on: https://go-review.googlesource.com/38832
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
POSIX Shell only supports = to compare variables inside '[' tests. But
this is Bash, where == is an alias for =. In practice they're the same,
but the current form is inconsisnent and breaks POSIX for no good
reason.
Change-Id: I38fa7a5a90658dc51acc2acd143049e510424ed8
Reviewed-on: https://go-review.googlesource.com/38031
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Compiler errors now show the exact line and line byte offset (sometimes
called "column") of where an error occured. For `go tool compile x.go`:
package p
const c int = false
//line foo.go:123
type t intg
reports
x.go:2:7: cannot convert false to type int
foo.go:123[x.go:4:8]: undefined: intg
(Some errors use the "wrong" position for the error message; arguably
the byte offset for the first error should be 15, the position of 'false',
rathen than 7, the position of 'c'. But that is an indepedent issue.)
The byte offset (column) values are measured in bytes; they start at 1,
matching the convention used by editors and IDEs.
Positions modified by //line directives show the line offset only for the
actual source location (in square brackets), not for the "virtual" file and
line number because that code is likely generated and the //line directive
only provides line information.
Because the new format might break existing tools or scripts, printing
of line offsets can be disabled with the new compiler flag -C. We plan
to remove this flag eventually.
Fixes#10324.
Change-Id: I493f5ee6e78457cf7b00025aba6b6e28e50bb740
Reviewed-on: https://go-review.googlesource.com/37970
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
A typo in the previous revision ("act" instead of "oldact") caused us
to return the sa_flags from the new (or zeroed) sigaction rather than
the old one.
In the presence of a signal handler registered before
runtime.libpreinit, this caused setsigstack to erroneously zero out
important sa_flags (such as SA_SIGINFO) in its attempt to re-register
the existing handler with SA_ONSTACK.
Change-Id: I3cd5152a38ec0d44ae611f183bc1651d65b8a115
Reviewed-on: https://go-review.googlesource.com/37852
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
There are a few problems from change 35494, discovered during testing
of change 37852.
1. I was confused about the usage of n.key in the sema variant, so we
were looping on the wrong condition. The error was not caught by
the TryBots (presumably due to missing TSAN coverage in the BSD and
darwin builders?).
2. The sysmon goroutine sometimes skips notetsleep entirely, using
direct usleep syscalls instead. In that case, we were not calling
_cgo_yield, leading to missed signals under TSAN.
3. Some notetsleep calls have long finite timeouts. They should be
broken up into smaller chunks with a yield at the end of each
chunk.
updates #18717
Change-Id: I91175af5dea3857deebc686f51a8a40f9d690bcc
Reviewed-on: https://go-review.googlesource.com/37867
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
write(2) is defined in unistd.h.
For the iOS builder.
Change-Id: I411ffe81988d8fbafffde89e4732a20af1a63325
Reviewed-on: https://go-review.googlesource.com/37962
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The iOS test harness was recently changed in response to lldb bugs
to replace breakpoints with the SIGUSR2 signal (CL 34926), and to
pass the current directory in the test binary arguments (CL 35152).
Both the signal sending and working directory setup is done from
the go test driver.
However, the new method doesn't work with tests where a C program is
the test driver instead of go test: the current working directory
will not be changed and SIGUSR2 is not raised.
Instead of copying that logic into any C test program, rework the
test harness (again) to move the setup logic to the early runtime
cgo setup code. That way, the harness will run even in the library
build modes.
Then, use the app Info.plist file to pass the working
directory, removing the need to alter the arguments after running.
Finally, use the SIGINT signal instead of SIGUSR2 to avoid
manipulating the signal masks or handlers.
Fixes the testcarchive tests on iOS.
With this CL, both darwin/arm and darwin/arm64 passes all.bash.
This CL replaces CL 34926, CL 35152 as well as the fixup CL
35123 and CL 35255. They are reverted in CLs earlier in the
relation chain.
Change-Id: I8485c7db1404fbd8daa261efd1ea89e905121a3e
Reviewed-on: https://go-review.googlesource.com/36090
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This reverts commit 333f764df3.
Replaced by a improved strategy later in the CL relation chain.
Change-Id: I70a1d2f0aa5aa0d3d0ec85b5a956c6fb60d88908
Reviewed-on: https://go-review.googlesource.com/36069
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This reverts commit 593ea3b360.
Replaced by a improved strategy later in the CL relation chain.
Change-Id: I6963e4d1bf38e7028cf545a953e28054d83548
Change-Id: I6963e4d1bf38e7028cf545a953e28054d8354870
Reviewed-on: https://go-review.googlesource.com/36067
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This reverts commit 467109bf56.
Replaced by a improved strategy later in the CL relation chain.
Change-Id: Ib90813b5a6c4716b563c8496013d2d57f9c022b8
Reviewed-on: https://go-review.googlesource.com/36066
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Import the github.com/google/pprof and github.com/ianlancetaylor/demangle
packages, without modification.
Build the golang version of pprof from cmd/pprof/pprof.go
by importing the packages from src/cmd/vendot/github.com/google/pprof
The versions upstreamed are:
github.com/ianlancetaylor/demangle 4883227f66371e02c4948937d3e2be1664d9be38
github.com/google/pprof 7eb5ba977f28f2ad8dd5f6bb82cc9b454e123cdc
Update misc/nacl/testzip.proto for new tests.
Change-Id: I076584856491353607a3b98b67d0ca6838be50d6
Reviewed-on: https://go-review.googlesource.com/36798
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This ensures that SIGPROF is handled correctly when using
runtime/pprof in a c-archive or c-shared library.
Separate profiler handling into pre-process changes and per-thread
changes. Simplify the Windows code slightly accordingly.
Fixes#18220.
Change-Id: I5060f7084c91ef0bbe797848978bdc527c312777
Reviewed-on: https://go-review.googlesource.com/34018
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
Before this CL, Go programs in c-archive or c-shared buildmodes
would not handle SIGPIPE. That leads to surprising behaviour where
writes on a closed pipe or socket would raise SIGPIPE and terminate
the program. This CL changes the Go runtime to handle
SIGPIPE regardless of buildmode. In addition, SIGPIPE from non-Go
code is forwarded.
This is a refinement of CL 32796 that fixes the case where a non-default
handler for SIGPIPE is installed by the host C program.
Fixes#17393
Change-Id: Ia41186e52c1ac209d0a594bae9904166ae7df7de
Reviewed-on: https://go-review.googlesource.com/35960
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TestMain doesn't make use of any flags.
Change-Id: I98ec582fb004045a5067618f605ccfeb1f9f4bbb
Reviewed-on: https://go-review.googlesource.com/33613
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Tests that use TestMain might never call m.Run(), and simply return
from TestMain. In that case, the iOS test harness never sees the
PASS from the testing framework and assumes the test failed.
Allow an exit with exit code 0 to also mean test success, thereby
fixing the objdump test on iOS.
Change-Id: I1fe9077b05931aa0905e41b88945cd153c5b35b6
Reviewed-on: https://go-review.googlesource.com/36065
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If -test.timeout is not specified to go test, it will time out after
a default 10 minutes.
The iOS exec wrapper also contains a fail safe timeout mechanism for
a stuck device. However, if no explicit -test.timeout is specified,
it will use a timeout of 0, plus some constant amount.
Use the same default timeout in the exec wrapper as for go test,
10 minutes.
Change-Id: I6465ccd9f7b9ce08fa302e6697f7938a0ea9af34
Reviewed-on: https://go-review.googlesource.com/36062
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The iOS exec wrapper use the constant bundle id "golang.gotest" for
running Go programs on iOS. However, that only happens to work on
the old iOS builders where their provisioning profile covers
that bundle id.
Expand the detection script to list all available provisioning
profiles for the attached device and include the bundle id in the
GOIOS_APP_ID environment variable.
To allow the old builders to continue, the "golang.gotest" bundle
id is used as a fallback if only the app id prefix is specified in
GOIOS_APP_ID.
For the new builders.
Change-Id: I8baa1d4d57f845de851c3fad3f178e05e9a01b17
Reviewed-on: https://go-review.googlesource.com/36060
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
On (at least) macOS 10.12, the `security cms` subcommand used by the
iOS detection script will output an error to stderr. The command
otherwise succeeds, but the extra line confuses a later parsing step.
To fix it, use only stdout and ignore stderr from every command run
by detect.go.
For the new iOS builders.
Change-Id: Iee426da7926d7f987ba1be061fa92ebb853ef53d
Reviewed-on: https://go-review.googlesource.com/36059
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Modules appear in the moduledata linked list in the order they are
loaded by the dynamic loader, with one exception: the
firstmoduledata itself the module that contains the runtime.
This is not always the first module (when using -buildmode=shared,
it is typically libstd.so, the second module).
The order matters for typelinksinit, so we swap the first module
with whatever module contains the main function.
Updates #18729
This fixes the test case extracted with -linkshared, and now
go test -linkshared encoding/...
passes. However the original issue about a plugin failure is not
yet fixed.
Change-Id: I9f399ecc3518e22e6b0a350358e90b0baa44ac96
Reviewed-on: https://go-review.googlesource.com/35644
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is needed for typical tests with gccgo, as it passes the
LD_LIBRARY_PATH environment variable to the new program.
Change-Id: I9bf4b0dbdff63f5449c7fcb8124eaeab10ed7f34
Reviewed-on: https://go-review.googlesource.com/35481
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
With GCC 7 (not yet released), cgo fails with errors like
./sigaltstack.go:65:8: call of non-function C.restoreSignalStack
I do not know precisely why. Explicitly declaring that there are no
arguments to the static function is a simple fix for the debug info.
Change-Id: Id96e1cb1e55ee37a9f1f5ad243d7ee33e71584ac
Reviewed-on: https://go-review.googlesource.com/35480
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We already do this for shared libraries. Do it for plugins also.
Suggestions on how to test this would be welcome.
I'd like to get this in for 1.8. It could lead to mysterious
hangs when using plugins.
Fixes#18676
Change-Id: I03209b096149090b9ba171c834c5e59087ed0f92
Reviewed-on: https://go-review.googlesource.com/35117
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
The working directory is now adjusted to match the typical Go test
working directory in main, as the old trick for adjusting earlier
stopped working with the latest version of LLDB bugs.
That means the small number of places where testdata files are
read before main is called no longer work. This CL adjusts those
reads to happen after main is called. (This has the bonus effect of
not reading some benchmark testdata files in all.bash.)
Fixes compress/bzip2, go/doc, go/parser, os, and time package
tests on the iOS builder.
Change-Id: If60f026aa7848b37511c36ac5e3985469ec25209
Reviewed-on: https://go-review.googlesource.com/35255
Run-TryBot: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Another change in behvaior (bug) in LLDB. Despite the fact that
LLDB can dump the symtab of our test binaries and show the function
addresses, it can no longer call the functions. This means the chdir
trick on signal is failing.
This CL uses a new trick. For iOS, the exec script passes the change
in directory as an argument, and it is processed early by the test
harness generated by cmd/go.
For the iOS builders.
Change-Id: I8f5d0f831fe18de99f097761f89c5184d5bf2afb
Reviewed-on: https://go-review.googlesource.com/35152
Reviewed-by: Elias Naur <elias.naur@gmail.com>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Make sure that the same type and itab generated in two
different plugins are actually the same thing.
See also CL 35115
Change-Id: I0c1ecb039d7e2bf5a601d58dfa162a435ae4ef76
Reviewed-on: https://go-review.googlesource.com/35116
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
The iOS test harness has set a breakpoint early in the life of Go
programs so that it can change the current working directory using
information only available from the host debugger. Somewhere in the
upgrade to iOS 10 / XCode 8.2, breakpoints stopped working. This
may be an LLDB bug, or a bug in the ios-deploy LLDB scripts, it's
not clear.
Work around the problem by giving up on breakpoints. Instead, early
in the life of every test binary built for iOS, send (and ignore) a
SIGUSR2 signal. The debugger will catch this, giving the script
go_darwin_arm_exec a chance to change the working directory.
For the iOS builders.
Change-Id: I7476531985217d0c76bc176904c48379210576c2
Reviewed-on: https://go-review.googlesource.com/34926
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Make sure that the same type and itab generated in two
different shared library are actually the same thing.
Change-Id: Ica45862d65ff8bc7ad04d59a41f57223f71224cd
Reviewed-on: https://go-review.googlesource.com/35115
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Xcode 8.0 has been donen't support the iOS 5 anymore
Fixes#18390.
Change-Id: Icc97e09424780c610a8fe173d0cf461d76b06da4
Reviewed-on: https://go-review.googlesource.com/34673
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Wait longer in case the system is heavily loaded.
Fixes#18324.
Change-Id: If9a6da1cf32d0321302d244ee24fb3f80e54489d
Reviewed-on: https://go-review.googlesource.com/34653
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
golang.org/issue/17594 was caused by additab being called more than once for
an itab. golang.org/cl/32131 fixed that by making the itabs local symbols,
but that in turn causes golang.org/issue/18252 because now there are now
multiple itab symbols in a process for a given (type,interface) pair and
different code paths can end up referring to different itabs which breaks
lots of reflection stuff. So this makes itabs global again and just takes
care to only call additab once for each itab.
Fixes#18252
Change-Id: I781a193e2f8dd80af145a3a971f6a25537f633ea
Reviewed-on: https://go-review.googlesource.com/34173
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Confirm that a trivial executable can build and execute using
-fsanitize=memory.
Fixes#18335 (by skipping the tests when they don't work).
Change-Id: Icb7a276ba7b57ea3ce31be36f74352cc68dc89d5
Reviewed-on: https://go-review.googlesource.com/34505
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This fixes Linux and the *BSD platforms on 386/amd64.
A few OS/arch combinations were already saving registers and/or doing
something that doesn't clearly resemble the SysV C ABI; those have
been left alone.
Fixes#18328.
Change-Id: I6398f6c71020de108fc8b26ca5946f0ba0258667
Reviewed-on: https://go-review.googlesource.com/34501
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Explicitly filter any C-only cgo functions out of pclntable,
which allows them to be duplicated with the host binary.
Updates #18190.
Change-Id: I50d8706777a6133b3e95f696bc0bc586b84faa9e
Reviewed-on: https://go-review.googlesource.com/34199
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Now that we try to handle qualifiers correctly (as of CL 33325), don't
strip them from a void* pointer. Otherwise we break a case like "const
void**", as the "const" qualifier is dropped and the resulting
"void**" triggers a warning from the C compiler.
Fixes#18298.
Change-Id: If51df1889b0f6a907715298c152e6d4584747acb
Reviewed-on: https://go-review.googlesource.com/34370
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Also, if we changed the gsignal stack to match the stack we are
executing on, restore it when returning from the signal handler, for
safety.
Fixes#18255.
Change-Id: Ic289b36e4e38a56f8a6d4b5d74f68121c242e81a
Reviewed-on: https://go-review.googlesource.com/34239
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
The pclntable contains pointers to functions. If the function symbol
is exported in a plugin, and there is a matching symbol in the host
binary, then the pclntable of a plugin ends up pointing at the
function in the host module.
This doesn't work because the traceback code expects the pointer to
be in the same module space as the PC value.
So don't export functions that might overlap with the host binary.
This way the pointer stays in its module.
Updates #18190
Change-Id: Ifb77605b35fb0a1e7edeecfd22b1e335ed4bb392
Reviewed-on: https://go-review.googlesource.com/34196
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
It is reported as failing for two people (issues #18202 and #18212).
The failure mode is that the system gets overloaded and other programs
fail to run.
Fixes#18202.
Change-Id: I1f1ca1f5d8eed6cc3a9dffac3289851e09fa662b
Reviewed-on: https://go-review.googlesource.com/34017
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
For reasons that I do not know, OpenBSD does not call pthread_create
directly, but instead looks it up in libpthread.so. That means that we
can't use the code used on other systems to retry pthread_create on
EAGAIN, since that code simply calls pthread_create.
This patch copies that code to an OpenBSD-specific version.
Also, check for an EAGAIN failure in the test, as that seems to be the
underlying cause of the test failure on several systems including OpenBSD.
Fixes#18146.
Change-Id: I3bceaa1e03a7eaebc2da19c9cc146b25b59243ef
Reviewed-on: https://go-review.googlesource.com/33905
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This reverts commit d24b57a6a1.
Reason for revert: Further complications arised (issue 18100). We'll try again in Go 1.9.
Change-Id: I5ca93d2643a4be877dd9c2d8df3359718440f02f
Reviewed-on: https://go-review.googlesource.com/33770
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Minux Ma <minux@golang.org>
From the garbage collector's perspective, time can move backwards in
cgocall. However, in the midst of this time warp, the pointer
arguments to cgocall can go from dead back to live. If a stack growth
happens while they're dead and then a GC happens when they become live
again, GC can crash with a bad heap pointer.
Specifically, the sequence that leads to a panic is:
1. cgocall calls entersyscall, which saves the PC and SP of its call
site in cgocall. Call this PC/SP "X". At "X" both pointer arguments
are live.
2. cgocall calls asmcgocall. Call the PC/SP of this call "Y". At "Y"
neither pointer argument is live.
3. asmcgocall calls the C code, which eventually calls back into the
Go code.
4. cgocallbackg remembers the saved PC/SP "X" in some local variables,
calls exitsyscall, and then calls cgocallbackg1.
5. The Go code causes a stack growth. This stack unwind sees PC/SP "Y"
in the cgocall frame. Since the arguments are dead at "Y", they are
not adjusted.
6. The Go code returns to cgocallbackg1, which calls reentersyscall
with the recorded saved PC/SP "X", so "X" gets stashed back into
gp.syscallpc/sp.
7. GC scans the stack. It sees there's a saved syscall PC/SP, so it
starts the traceback at PC/SP "X". At "X" the arguments are considered
live, so it scans them, but since they weren't adjusted, the pointers
are bad, so it panics.
This issue started as of commit ca4089ad, when the compiler stopped
marking arguments as live for the whole function.
Since this is a variable liveness issue, fix it by adding KeepAlive
calls that keep the arguments live across this whole time warp.
The existing issue7978 test has all of the infrastructure for testing
this except that it's currently up to chance whether a stack growth
happens in the callback (it currently only happens on the
linux-amd64-noopt builder, for example). Update this test to force a
stack growth, which causes it to fail reliably without this fix.
Fixes#17785.
Change-Id: If706963819ee7814e6705693247bcb97a6f7adb8
Reviewed-on: https://go-review.googlesource.com/33710
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Use an explicit ./ to make sure we link against the libgo.so we just
built, not some other libgo.so that the compiler or linker may decide to
seek out.
Fixes#17986.
Change-Id: Id23f6c95aa2b52f4f42c1b6dac45482c22b4290d
Reviewed-on: https://go-review.googlesource.com/33413
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Before this CL, Go programs in c-archive or c-shared buildmodes
would not handle SIGPIPE. That leads to surprising behaviour where
writes on a closed pipe or socket would raise SIGPIPE and terminate
the program. This CL changes the Go runtime to handle
SIGPIPE regardless of buildmode. In addition, SIGPIPE from non-Go
code is forwarded.
Fixes#17393
Updates #16760
Change-Id: I155e82020a03a5cdc627a147c27da395662c3fe8
Reviewed-on: https://go-review.googlesource.com/32796
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The top-level qualifiers are unimportant for our purposes. If a C
function is defined as `const int f(const int i)`, the `const`s are
meaningless to C, and we want to avoid using them in the struct we
create where the `const` has a completely different meaning.
This unwinds https://golang.org/cl/33097 with regard to top-level
qualifiers.
Change-Id: I3d66b0eb43b6d9a586d9cdedfae5a2306b46d96c
Reviewed-on: https://go-review.googlesource.com/33325
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
CL 33239 changed the polling loops from using sched_yield to a sleep
for 1/1000 of a second. The loop counters were not updated, so failing
tests now take 100 seconds to complete. Lower the loop counts to 5
seconds instead.
Change-Id: I7c9a343dacc8188603ecf7e58bd00b535cfc87f5
Reviewed-on: https://go-review.googlesource.com/33280
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
To generate the correct section offset the shared code path for
R_CALL, R_PCREL, and R_GOTPCREL on darwin when externally linking
walks up the symbol heirarchy adding the differences. This is fine,
except in the case where we are generating a GOT lookup, because
the topmost symbol is left in r.Xsym instead of the symbol we are
looking up. So all funcsym GOT lookups were looking up the outer
"go.func.*" symbol.
Fix this by separating out the R_GOTPCREL code path.
For #17828 (and may fix it).
Change-Id: I2c9f4d135e77c17270aa064d8c876dc6d485d659
Reviewed-on: https://go-review.googlesource.com/33211
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This ensures that runtime's signal handlers pass through the TSAN and
MSAN libc interceptors and subsequent calls to the intercepted
sigaction function from C will correctly see them.
Fixes#17753.
Change-Id: I9798bb50291a4b8fa20caa39c02a4465ec40bb8d
Reviewed-on: https://go-review.googlesource.com/33142
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If a C union type (or a C++ class type) can contain a pointer field,
then run the cgo checks on pointers to that type. This will test the
pointer as though it were an unsafe.Pointer, and will crash if it points
to Go memory that contains a pointer.
Fixes#15942.
Change-Id: Ic2d07ed9648d4b27078ae7683e26196bcbc59fc9
Reviewed-on: https://go-review.googlesource.com/33237
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
In plugins and every program that opens a plugin, include a hash of
every imported package.
There are two versions of each hash: one local and one exported.
As the program starts and plugins are loaded, the first exported
symbol for each package becomes the canonical version.
Any subsequent plugin's local package hash symbol has to match the
canonical version.
Fixes#17832
Change-Id: I4e62c8e1729d322e14b1673bada40fa7a74ea8bc
Reviewed-on: https://go-review.googlesource.com/33161
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Apparently when GOMAXPROCS == 1 a simple sched_yield in a tight loop is
not necessarily sufficient to permit a signal handler to run. Instead,
sleep for 1/1000 of a second.
Fixes#16649.
Change-Id: I83910144228556e742b7a92a441732ef61aa49d9
Reviewed-on: https://go-review.googlesource.com/33239
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The cgo tool used to simply ignore C type qualifiers. To avoid problems
when a C function expected a qualifier that was not present, cgo emitted
a cast to void* around all pointer arguments. Unfortunately, that broke
code that contains both a function declaration and a macro, when the
macro required the argument to have the right type. To fix this problem,
don't ignore qualifiers. They are easy enough to handle for the limited
set of cases that matter for cgo, in which we don't care about array or
function types.
Fixes#17537.
Change-Id: Ie2988d21db6ee016a3e99b07f53cfb0f1243a020
Reviewed-on: https://go-review.googlesource.com/33097
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The exported symbol for a plugin can be the only reference to a
type in a program. In particular, "var F func()" will have
the type *func(), which is uncommon.
Fixes#17140
Change-Id: Ide2104edbf087565f5377374057ae54e0c00c57e
Reviewed-on: https://go-review.googlesource.com/29692
Run-TryBot: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
In a function argument, we handle a typedef for a pointer specially,
using the pointer type rather than the typedef, to permit the Go calls
to match the laxer type conversions permitted in C. We record the
typedef so that we use that type in the C code, in case it has a special
attribute. However, using the typedef is wrong when using a pointer to a
basic type, because the C code may sometimes use the typedef and
sometimes not, and using the typedef in all cases will cause incorrect
type errors on the Go side. Fortunately we only really need to use the
typedef when pointing to a struct/union/class, and in such a case
confusion is unlikely.
Fixes#17723.
Change-Id: Id2eaeb156faeaf2e8eb9cf0b8f95b44caf8cfbd2
Reviewed-on: https://go-review.googlesource.com/32536
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
A plugin with no exported symbols is still potentially very useful.
Its init functions are called on load, and it so it can have visible
side effects.
Fixes#17681
Change-Id: Icdca31f48e5ab13c99020a2ef724f3de47dcd74b
Reviewed-on: https://go-review.googlesource.com/32437
Run-TryBot: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
sigfwd calls an arbitrary C signal handler function. The System V ABI
for x86_64 (and the most recent revision of the ABI for i386) requires
the stack to be 16-byte aligned.
Fixes: #17641
Change-Id: I77f53d4a8c29c1b0fe8cfbcc8d5381c4e6f75a6b
Reviewed-on: https://go-review.googlesource.com/32107
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Plumb the import path of a plugin package through to the linker, and
use it as the prefix on the exported symbol names.
Before this we used the basename of the plugin file as the prefix,
which could conflict and result in multiple loaded plugins sharing
symbols that are distinct.
Fixes#17155Fixes#17579
Change-Id: I7ce966ca82d04e8507c0bcb8ea4ad946809b1ef5
Reviewed-on: https://go-review.googlesource.com/32355
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is convenient for direct use of `go tool cgo`. We can also use it
from the go tool to reduce the length of the file names that cgo
generates.
Update #17070.
Change-Id: I8466a0a2cc68a732d17d07319e303497715bac8c
Reviewed-on: https://go-review.googlesource.com/32354
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Otherwise, the way the ELF dynamic linker works means that you can end up with
the same itab being passed to additab twice, leading to the itab linked list
having a cycle in it. Add a test to additab in runtime to catch this when it
happens, not some arbitrary and surprsing time later.
Fixes#17594
Change-Id: I6c82edcc9ac88ac188d1185370242dc92f46b1ad
Reviewed-on: https://go-review.googlesource.com/32131
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The Dragonfly libc returns a non-zero value for malloc(-1).
Fixes#17585.
Change-Id: Icfe68011ccbc75c676273ee3c3efdf24a520a004
Reviewed-on: https://go-review.googlesource.com/32050
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
With the old code rewriting refs would rewrite the inner arguments
rather than the outer ones, leaving a reference to C.val in the outer
arguments.
Change-Id: I9b91cb4179eccd08500d14c6591bb15acf8673eb
Reviewed-on: https://go-review.googlesource.com/31672
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The pointer checking code needs to know the exact type of the parameter
expected by the C function, so that it can use a type assertion to
convert the empty interface returned by cgoCheckPointer to the correct
type. Previously this was done by using a type conversion, but that
meant that the code accepted arguments that were convertible to the
parameter type, rather than arguments that were assignable as in a
normal function call. In other words, some code that should not have
passed type checking was accepted.
This CL changes cgo to always use a function literal for pointer
checking. Now the argument is passed to the function literal, which has
the correct argument type, so type checking is performed just as for a
function call as it should be.
Since we now always use a function literal, simplify the checking code
to run as a statement by itself. It now no longer needs to return a
value, and we no longer need a type assertion.
This does have the cost of introducing another function call into any
call to a C function that requires pointer checking, but the cost of the
additional call should be minimal compared to the cost of pointer
checking.
Fixes#16591.
Change-Id: I220165564cf69db9fd5f746532d7f977a5b2c989
Reviewed-on: https://go-review.googlesource.com/31233
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Fixes#17439
Change-Id: I7caa28519f38692f9ca306f0789cbb975fa1d7c4
Reviewed-on: https://go-review.googlesource.com/31112
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
complex64 and complex128 are treated like [2]float32 and [2]float64,
so it makes sense to align them the same way.
Change-Id: Ic614bcdcc91b080aeb1ad1fed6fc15ba5a2971f8
Reviewed-on: https://go-review.googlesource.com/19800
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
main.main and main.init were not being marked as reachable.
Fixes#17076
Change-Id: Ib3e29bd35ba6252962e6ba89173ca321ed6849b9
Reviewed-on: https://go-review.googlesource.com/28996
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
cmd/go links mingwex and mingw32 libraries to every package it builds.
This breaks when 2 different packages call same gcc standard library
function pow. gcc linker appends pow implementation to the compiled
package, and names that function "pow". But when these 2 compiled
packages are linked together into the final executable, linker
complains, because it finds two "pow" functions with the same name.
This CL stops linking of mingwex and mingw32 during package build -
that leaves pow function reference unresolved. pow reference gets
resolved as final executable is built, by having both internal and
external linker use mingwex and mingw32 libraries.
Fixes#8756
Change-Id: I50ddc79529ea5463c67118d668488345ecf069bc
Reviewed-on: https://go-review.googlesource.com/26670
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes C compiler warning:
./main.go:54:1: warning: control reaches end of non-void function [-Wreturn-type]
Should help fix the linux builders
that broke due to CL 23005.
Change-Id: Ib0630798125e35a12f99d666b7ffe7b3196f0ecc
Reviewed-on: https://go-review.googlesource.com/28176
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This permits people to use -buildmode=c-archive to produce an archive
file that can be included in a PIE or shared library.
Change-Id: Ie340ee2f08bcff4f6fd1415f7d96d51ee3a7c9a1
Reviewed-on: https://go-review.googlesource.com/24180
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Add missing race and msan checks to reflect.typedmmemove and
reflect.typedslicecopy. Missing these checks caused the race detector
to miss races and caused msan to issue false positive errors.
Fixes#16281.
Change-Id: I500b5f92bd68dc99dd5d6f297827fd5d2609e88b
Reviewed-on: https://go-review.googlesource.com/24760
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Syntax tree nodes, scanner, parser, basic printers.
Builds syntax trees for entire Go std lib at a rate of ~1.8M lines/s
in warmed up state (MacMini, 2.3 GHz Intel Core i7, 8GB RAM):
$ go test -run StdLib -fast
parsed 1074617 lines (2832 files) in 579.66364ms (1853863 lines/s)
allocated 282.212Mb (486.854Mb/s)
PASS
Change-Id: Ie26d9a7bf4e5ff07457aedfcc9b89f0eba72ae3f
Reviewed-on: https://go-review.googlesource.com/27195
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
This time with the cherry-pick from the proper patch of
the old CL.
Stack size increased.
Corrected NaN-comparison glitches.
Marked g register as clobbered by calls.
Fixed shared libraries.
live_ssa.go still disabled because of differences.
Presumably turning on more optimization will fix
both the stack size and the live_ssa.go glitches.
Enhanced debugging output for shared libs test.
Rebased onto master.
Updates #16010.
Change-Id: I40864faf1ef32c118fb141b7ef8e854498e6b2c4
Reviewed-on: https://go-review.googlesource.com/27159
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
It was removed in upstream Chrome https://codereview.chromium.org/2016863004
Rather than update to the latest version, make the minimal change for Go 1.7 and
change the "showToUser" boolean from true to false.
Tested by hand that it goes away after this change.
Updates #16247
Change-Id: I051f49da878e554b1a34a88e9abc70ab50e18780
Reviewed-on: https://go-review.googlesource.com/25117
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When cgo writes a _cgoCheckPointerN function to handle unsafe.Pointer,
use the function's argument type rather than interface{}. This permits
type errors to be detected at build time rather than run time.
Fixes#13830.
Change-Id: Ic7090905e16b977e2379670e0f83640dc192b565
Reviewed-on: https://go-review.googlesource.com/23675
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Before, the Android exec wrapper expected the trailing exit code
output on its own line, like this:
PASS
exitcode=0
However, some tests can sometimes squeeze in some output after
the test harness outputs "PASS" and the newline. The
TestWriteHeapDumpFinalizers test is particularly prone to this,
since its finalizers println to standard out. When it happens, the
output looks like this:
PASS
finalizedexitcode=0
Two recent failures caused by this race:
https://build.golang.org/log/185605e1b936142c22350eef22d20e982be53c29https://build.golang.org/log/e61cf6a050551d10360bd90be3c5f58c3eb07605
Since the "exitcode=" string is always echoed after the test output,
the fix is simple: instead of looking for the last newline in the
output, look for the last exitcode string instead.
Change-Id: Icd6e53855eeba60b982ad3108289d92549328b86
Reviewed-on: https://go-review.googlesource.com/23750
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Before GCC 7 defined __SANITIZE_THREAD__ when using TSAN,
runtime/cgo/libcgo.h could not determine reliably whether TSAN was in
use when using GCC.
Fixes#15983.
Change-Id: I5581c9f88e1cde1974c280008b2230fe5e971f44
Reviewed-on: https://go-review.googlesource.com/23833
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
We used to check time at the point of the defer statement. This change
fixes cgo to check them when the deferred function is executed.
Fixes#15921.
Change-Id: I72a10e26373cad6ad092773e9ebec4add29b9561
Reviewed-on: https://go-review.googlesource.com/23650
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Any defer in a shared object crashed when GOARCH=386. This turns out to be two
bugs:
1) Calls to morestack were not processed to be PIC safe (must have been
possible to trigger this another way too)
2) jmpdefer needs to rewind the return address of the deferred function past
the instructions that load the GOT pointer into BX, not just past the call
Bug 2) requires re-introducing the a way for .s files to know when they are
being compiled for dynamic linking but I've tried to do that in as minimal
a way as possible.
Fixes#15916
Change-Id: Ia0d09b69ec272a176934176b8eaef5f3bfcacf04
Reviewed-on: https://go-review.googlesource.com/23623
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The test for #9400 relies on an assembler function that manipulates
the stack pointer. Meanwile, it uses a global variable for
synchronization. However, position independent code on 386 use a
function call to fetch the base address for global variables.
That function call in turn overwrites the Go stack.
Fix that by fetching the global variable address once before the
stack register manipulation.
Fixes the android/386 builder.
Change-Id: Ib77bd80affaa12f09d582d09d8b84a73bd021b60
Reviewed-on: https://go-review.googlesource.com/23683
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
When a wrapper method calls the real implementation, it's not possible to use a
tail call when dynamic linking on ppc64le. The bad scenario is when a local
call is made to the wrapper: the wrapper will call the implementation, which
might be in a different module and so set the TOC to the appropriate value for
that module. But if it returns directly to the wrapper's caller, nothing will
reset it to the correct value for that function.
Change-Id: Icebf24c9a2a0a9a7c2bce6bd6f1358657284fb10
Reviewed-on: https://go-review.googlesource.com/23468
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Some tests cannot build for Android; use build tags and stubs to
skip them.
For #15919
Change-Id: Ieedcb73d4cabe23c3775cfb1d44c1276982dccd9
Reviewed-on: https://go-review.googlesource.com/23634
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Add TSAN acquire/release calls to runtime/cgo to match the ones
generated by cgo. This avoids a false positive race around the malloc
memory used in runtime/cgo when other goroutines are simultaneously
calling malloc and free from cgo.
These new calls will only be used when building with CGO_CFLAGS and
CGO_LDFLAGS set to -fsanitize=thread, which becomes a requirement to
avoid all false positives when using TSAN. These are needed not just
for runtime/cgo, but also for any runtime package that uses cgo (such as
net and os/user).
Add an unused attribute to the _cgo_tsan_acquire and _cgo_tsan_release
functions, in case there are no actual cgo function calls.
Add a test that checks that setting CGO_CFLAGS/CGO_LDFLAGS avoids a
false positive report when using os/user.
Change-Id: I0905c644ff7f003b6718aac782393fa219514c48
Reviewed-on: https://go-review.googlesource.com/23492
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
The cgo tool generates compiler errors to find out what kind of name it
is using. Turning on optimization can confuse that process by producing
new unexpected messages.
Fixes#14669.
Change-Id: Idc8e35fd259711ecc9638566b691c11d17140325
Reviewed-on: https://go-review.googlesource.com/23231
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Acquire and release the TSAN synchronization point when calling malloc,
just as we do when calling any other C function. If we don't do this,
TSAN will report false positive errors about races calling malloc and
free.
We used to have a special code path for malloc and free, going through
the runtime functions cmalloc and cfree. The special code path for cfree
was no longer used even before this CL. This CL stops using the special
code path for malloc, because there is no place along that path where we
could conditionally insert the TSAN synchronization. This CL removes
the support for the special code path for both functions.
Instead, cgo now automatically generates the malloc function as though
it were referenced as C.malloc. We need to automatically generate it
even if C.malloc is not called, even if malloc and size_t are not
declared, to support cgo-provided functions like C.CString.
Change-Id: I829854ec0787a80f33fa0a8a0dc2ee1d617830e2
Reviewed-on: https://go-review.googlesource.com/23260
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
When the generated stub functions write back the results to the stack,
they can in some cases be writing to the same memory on the g0 stack.
There is no race here (assuming there is no race in the Go code), but
the thread sanitizer does not know that. Turn off the thread sanitizer
for the stub functions to prevent false positive warnings.
Current clang suggests the no_sanitize("thread") attribute, but that
does not work with clang 3.6 or GCC. clang 3.6, GCC, and current clang
all support the no_sanitize_thread attribute, so use that
unconditionally.
The test case and first version of the patch are from Dmitriy Vyukov.
Change-Id: I80ce92824c6c8cf88ea0fe44f21cf50cf62474c9
Reviewed-on: https://go-review.googlesource.com/23252
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Buildmode c-archive now supports position independent code for
darwin/arm (in addition to darwin/arm64). Make PIC (-shared) the
default for both platforms in the default buildmode.
Without this change, gomobile will go install the standard library
into its separate package directory without PIC support.
Also add -shared to darwin/arm64 in buildmode c-archive, for
symmetry (darwin/arm64 always generates position independent code).
Fixes#15519
Change-Id: If27d2cbea8f40982e14df25da2703cbba572b5c6
Reviewed-on: https://go-review.googlesource.com/22920
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The old code assumed that the thread ID set by pthread_create would be
available in the newly created thread. While that is clearly true
eventually, it is not necessarily true immediately. Rather than try to
pass down the thread ID, just call pthread_self in the created thread.
Fixes#15576 (I hope).
Change-Id: Ic07086b00e4fd5676c04719a299c583320da64a1
Reviewed-on: https://go-review.googlesource.com/22880
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Now that darwin/arm supports position independent code, allow the
binaries generated by the c-archive tests be position independent
(PIE) as well.
Change-Id: If0517f06e92349ada29a4e3e0a951f08b0fcc710
Reviewed-on: https://go-review.googlesource.com/22841
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fixes#14544
Change-Id: I58b0b164ebbfeafe4ab32039a063df53e3018a6d
Reviewed-on: https://go-review.googlesource.com/22730
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Sean Lake <odysseus9672@gmail.com>
Consider three shared libraries:
libBase.so -- defines a type T
lib2.so -- references type T
lib3.so -- also references type T, and something from lib2
lib2.so will contain a type symbol for T in its symbol table, but no
definition. If, when linking lib3.so the linker reads the symbols from lib2.so
before libBase.so, the linker didn't read the type data and later crashed.
The fix is trivial but the test change is a bit messy because the order the
linker reads the shared libraries in ends up depending on the order of the
import statements in the file so I had to rename one of the test packages so
that gofmt doesn't fix the test by accident...
Fixes#15516
Change-Id: I124b058f782c900a3a54c15ed66a0d91d0cde5ce
Reviewed-on: https://go-review.googlesource.com/22744
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
I got a complaint that cgo output triggers warnings with
-Wdeclaration-after-statement. I don't think it's worth testing for
this--C has permitted declarations after statements since C99--but it is
easy enough to fix. It may break again; so it goes.
This CL also fixes errno handling to avoid getting confused if the tsan
functions happen to change the global errno variable.
Change-Id: I0ec7c63a6be5653ef44799d134c8d27cb5efa441
Reviewed-on: https://go-review.googlesource.com/22686
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
After CL 22461, c-archive build on darwin/arm is by default compiled
with -shared and installed in pkg/darwin_arm_shared.
Fix build (2nd time...)
Change-Id: Ia2bb09bb6e1ebc9bc74f7570dd80c81d05eaf744
Reviewed-on: https://go-review.googlesource.com/22534
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
After CL 22461, c-archive build on darwin/arm is by default compiled
with -shared, so update the install path.
Fix build.
Change-Id: Ie93dbd226ed416b834da0234210f4b98bc0e3606
Reviewed-on: https://go-review.googlesource.com/22507
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The GNU linker follows the letter of -znocopyreloc by refusing to
generate COPY relocations on arm64. Unfortunately it generates an
error instead of finding another way. The gold linker works, so
switch to it.
Fixes linux/arm64 build.
Change-Id: I1f7119d999c8f9f1f2d0c1e06b6462cea9c02a71
Reviewed-on: https://go-review.googlesource.com/22185
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
https://golang.org/cl/10173 intrduced msigsave, ensureSigM and
_SigUnblock but didn't enable the new signal save/restore mechanism for
SIG{HUP,INT,QUIT,ABRT,TERM} on DragonFly BSD, FreeBSD and OpenBSD.
At present, it looks like they have the implementation. This change
enables the new mechanism on DragonFly BSD, FreeBSD and OpenBSD the same
as Darwin, NetBSD.
Change-Id: Ifb4b4743b3b4f50bfcdc7cf1fe1b59c377fa2a41
Reviewed-on: https://go-review.googlesource.com/18657
Run-TryBot: Mikio Hara <mikioh.mikioh@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This reverts commit ab4c9298b8.
Sysmon critically depends on system timer resolution for retaking
of Ps blocked in system calls. See #14790 for an example
of a program where execution time goes from 2ms to 30ms if
timeBeginPeriod(1) is not used.
We can remove timeBeginPeriod(1) when we support UMS (#7876).
Update #14790
Change-Id: I362b56154359b2c52d47f9f2468fe012b481cf6d
Reviewed-on: https://go-review.googlesource.com/20834
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Add supporting code for runtime initialization, including both
32- and 64-bit x86 architectures.
Add .ctors section on Windows to PE .o files, and INITENTRY to .ctors
section to plug in to the GCC C/C++ startup initialization mechanism.
This allows the Go runtime to initialize itself. Add .text section
symbol for .ctor relocations. Note: This is unlikely to be useful for
MSVC-based toolchains.
Fixes#13494
Change-Id: I4286a96f70e5f5228acae88eef46e2bed95813f3
Reviewed-on: https://go-review.googlesource.com/18057
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Change-Id: I91873aaebf79bdf1c00d38aacc1a1fb8d79656a7
Reviewed-on: https://go-review.googlesource.com/21433
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Try to avoid a race condition in the test. Passed 500 times on my
laptop.
Fixes#14956.
Change-Id: I5de2e1e3623832f0ab4f180149f7c57ce7cd23c0
Reviewed-on: https://go-review.googlesource.com/21171
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This is in support of https://golang.org/cl/18057 which adds
support for c-archive to the Windows platform.
The signal handling tests do not compile on Windows. This splits
them out into a separate main_unix.c file, and conditionally
includes them for non-Windows platforms.
Change-Id: Ic79ce83da7656d6703505e514554748a482b81a1
Reviewed-on: https://go-review.googlesource.com/21086
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The exec wrapper lock file was opened, locked and then never used
again, assuming it would close and unlock at process exit.
However, the garbage collector could collect and run the *os.File
finalizer that closes the file prematurely, rendering the lock
ineffective.
Make the lock global so that the lock is live during the entire
execution.
(Hopefully) fix the iOS builders.
Change-Id: I62429e92042a0a49c4f1ea553fdb32b6ea53a43e
Reviewed-on: https://go-review.googlesource.com/21137
Reviewed-by: David Crawshaw <crawshaw@golang.org>
I failed to rebase (and re-test) CL 21102 before submit, which meant
that two extra tests sneaked into testcarchive that still referenced
runtime.GOOS and runtime.GOARCH.
Convert the new tests.
While we're here, make sure pending tasks are flushed before running
the host tests. If not, the "##### misc/cgo/testcarchive" banner
and "PASS" won't show up in the all.bash output.
Change-Id: I41fc4ec9515f9a193fa052f7c31fac452153c897
Reviewed-on: https://go-review.googlesource.com/21106
Run-TryBot: Elias Naur <elias.naur@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The c-archive test were recently converted from shell script to Go.
Unfortunately, it also lost the ability to target iOS and Android
that lack C compilers and require exec wrappers.
Compile the c-archive test for the host and run it with the target
GOOS/GOARCH environment. Change the test to rely on go env GOOS
and go env GOARCH instead of runtime.GOOS and runtime.GOARCH.
Fixes#8345
Change-Id: I290ace2f7e96b87c55d99492feb7d660140dcb32
Reviewed-on: https://go-review.googlesource.com/21102
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The current runtime attempts to forward signals generated by non-Go
code to the original signal handler. If it can't call the original
handler directly, it currently attempts to re-raise the signal after
resetting the handler. In this case, the original context is lost.
This fix prevents that problem by simply returning from the go signal
handler after resetting the original handler. It only does this when
the original handler is the system default handler, which in all cases
is known to not recover. The signal is not reset, so it is retriggered
and the original handler takes over with the proper context.
Fixes#14899
Change-Id: Ib1c19dfa4b50d9732d7a453de3784c8141e1cbb3
Reviewed-on: https://go-review.googlesource.com/21006
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The iOS exec wrapper use complicated machinery to run a iOS binary
on a device.
Running several binaries concurrently doesn't work (reliably), which
can break tests running concurrently. For my setup, the
runtime:cpu124 and sync_cpu tests can't run reliably without one of them
crashing.
Add a file lock to the exec wrapper to serialize execution.
Fixes#14318 (for me)
Change-Id: I023610e014b327f8d66f1d2fd2e54dd0e56f2be0
Reviewed-on: https://go-review.googlesource.com/21074
Reviewed-by: David Crawshaw <crawshaw@golang.org>
A retry mechanism is in place to combat the inherent flakiness of
launching iOS test binaries. Before it covered just the starting of
lldb; expand it to cover the setup steps as well. Note that the
running of the binary itself is (still) not retried, to avoid
covering over genuine bugs.
On my test device (iPhone 5S, iOS 9.3) starting lldb can take longer
than 10 seconds, so increase the timeout for that.
Furthermore, some basic steps such as setting breakpoints in lldb
can take longer than the 1 second timeout. Increase that timeout
as well, to 2 seconds.
Finally, improve the error message for when ios-deploy is not
installed.
For #14318
Change-Id: Iba41d1bd9d023575b9454cb577b08f8cae081c2a
Reviewed-on: https://go-review.googlesource.com/21072
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Instruct lldb to pass through SIGCONT unhindered when running iOS
tests. Fixes the TestSIGCONT test in os/signal.
For #14318
Change-Id: I669264208cc3d6ecae9fbc8790e0b753a93a5e04
Reviewed-on: https://go-review.googlesource.com/21071
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This is to support https://golang.org/cl/18057, which is going to add
Windows support to this directory. Better to write the test in Go then
to have both test.bash and test.bat.
Update #13494.
Change-Id: I4af7004416309e885049ee60b9470926282f210d
Reviewed-on: https://go-review.googlesource.com/20892
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When building shared libraries, all symbols on Allsym are marked reachable.
What I didn't realize was that this includes the ".dup" symbols created when
"dupok" symbols are read from multiple package files. This breaks now because
deadcode makes some assumptions that fail for these ".dup" symbols, but in any
case was a bad idea -- I suspect this change makes libstd.so a bunch smaller,
but creating it was broken before this CL so I can't be sure.
This change simply stops adding these symbols to Allsym, which might make some
of the many iterations over Allsym the linker does a touch quicker, although
that's not the motivation here.
Add a test that no symbols called ".dup" makes it into the runtime shared
library.
Fixes#14841
Change-Id: I65dd6e88d150a770db2d01b75cfe5db5fd4f8d25
Reviewed-on: https://go-review.googlesource.com/20780
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Add a C.CBytes function to copy a Go byte slice into C memory. This
returns an unsafe.Pointer, since that is what needs to be passed to
C.free, and the data is often opaque bytes anyway.
Fixes#14838
Change-Id: Ic7bc29637eb6f1f5ee409b3898c702a59833a85a
Reviewed-on: https://go-review.googlesource.com/20762
Reviewed-by: Ian Lance Taylor <iant@golang.org>
cmd/link is clearly the way forward.
The original rationale for cmd/newlink was that it would be a clean Go reimplementation.
But when push came to shove, cmd/link got converted from C instead,
and all the work on build modes and the like is in cmd/link now.
Cleaning up cmd/link is likely a much better plan.
This directory is something to delete from releases and the
testdata is something that breaks every time the .6 format changes.
Fix both problems by just deleting it outright.
Change-Id: Ib00fecda258ba685f1752725971182af9d4459eb
Reviewed-on: https://go-review.googlesource.com/20380
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Latest version of gcc (tdm-1) 5.1.0 refuses to compile our code
on windows/386 (see issue for details). Rewrite the code.
Fixes#14328
Change-Id: I70f4f063282bd2958cd2175f3974369dd49dd8dc
Reviewed-on: https://go-review.googlesource.com/20008
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When Go code is used with C code compiled with -fsanitize=thread, adds
thread sanitizer calls so that correctly synchronized Go code does not
cause spurious failure reports from the thread sanitizer. This may
cause some false negatives, but for the thread sanitizer what is most
important is avoiding false positives.
Change-Id: If670e4a6f2874c7a2be2ff7db8728c6036340a52
Reviewed-on: https://go-review.googlesource.com/17421
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Single quotes to not expand variables inside of them.
Change-Id: I4a0622c0aebfc1c3f9d299f93f7a8253893b5858
Reviewed-on: https://go-review.googlesource.com/13661
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Looks like this was intended to match a literal period to restrict
this to `.go` files, but in POSIX grep, the unescaped period matches
any character.
Change-Id: I20e00323baa9e9631792eff5035966297665bbee
Reviewed-on: https://go-review.googlesource.com/19880
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This change adds support for Fortran files (.f, .F, .for, .f90) to the
go tool, in a similar fashion to Objective-C/C++. Only gfortran is
supported out of the box so far but leaves other Fortran compiler
toolchains the ability to pass the correct link options via CGO_LDFLAGS.
A simple test (misc/cgo/fortran) has been added and plugged into the
general test infrastructure. This test is only enabled when the $FC
environment variable is defined (or if 'gfortran' was found in $PATH.)
Derived from CL 4114.
Change-Id: Ifc855091942f95c6e9b17d91c17ceb4eee376408
Reviewed-on: https://go-review.googlesource.com/19670
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fixes#13930.
Change-Id: I124b7d31d1f2be05b7f23dafd1e52d9f3f02f3f0
Reviewed-on: https://go-review.googlesource.com/18623
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
And update two imports in cmd/internal/objfile/disasm.go.
This makes GO15VENDOREXPERIMENT=0 ./make.bash work.
For Go 1.7 we will move it back.
Fixes#14236.
Change-Id: I429c9af4baff8496f83d113b1b03b90e309f4f48
Reviewed-on: https://go-review.googlesource.com/19384
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It's awkward to get a string value in cgoCheckArg, but SWIG testing
revealed that it is possible. The new handling of extra files in the
ptr.go test emulates what SWIG does with an exported function that
returns a string.
Change-Id: I453717f867b8a49499576c28550e7c93053a0cf8
Reviewed-on: https://go-review.googlesource.com/19020
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
It doesn't work there ("out of memory") and doesn't really matter.
Fixes build (now that we enable cgo on the darwin/386 builder.)
Change-Id: I1d91e51ecb88c54eae39ac9a76f2c0b4e45263b0
Reviewed-on: https://go-review.googlesource.com/19004
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
People who want to use -buildmode=c-archive in unusual cross-compilation
setups will need something like this. It could also be done via (yet
another) environment variable but I use -extar by analogy with the
existing -extld.
Change-Id: I354cfabc4c470603affd13cd946997b3a24c0e6c
Reviewed-on: https://go-review.googlesource.com/18913
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Apparently the darwin/386 builder does not enable cgo.
This failure turned up running
GOARCH=386 GOHOSTARCH=386 ./all.bash
on my Mac.
Change-Id: Ia2487c4fd85d4b0f9f564880f22d9fde379946c3
Reviewed-on: https://go-review.googlesource.com/18859
Reviewed-by: Ian Lance Taylor <iant@golang.org>
https://golang.org/s/execmodes defines rules for how multiple codes of a go
package work when they end up in the address space of a single process, but
currently the linker blows up in this situation. Fix that by loading all .a
files before any .so files and ignoring duplicate symbols found when loading
shared libraries.
I know this is very very late for 1.6 but at least it should clearly not have
any effect when shared libraries are not in use.
Change-Id: I512ac912937e7502ff58eb5628b658ecce3c38e5
Reviewed-on: https://go-review.googlesource.com/18714
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
* Enable c-shared buildmode on darwin/386
* dyld does not support text relocation on i386. Add -read_only_relocs suppress flag to linker
Fixes#13904
Change-Id: I9adbd20d3f36ce9bbccf1bffb746b391780d088f
Reviewed-on: https://go-review.googlesource.com/18500
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
[Repeat of CL 18343 with build fixes.]
Before, NumGoroutine counted system goroutines and Stack (usually) didn't show them,
which was inconsistent and confusing.
To resolve which way they should be consistent, it seems like
package main
import "runtime"
func main() { println(runtime.NumGoroutine()) }
should print 1 regardless of internal runtime details. Make it so.
Fixes#11706.
Change-Id: If26749fec06aa0ff84311f7941b88d140552e81d
Reviewed-on: https://go-review.googlesource.com/18432
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Russ Cox <rsc@golang.org>
The previous behaviour of installing the signal handlers in a separate
thread meant that Go initialization raced with non-Go initialization if
the non-Go initialization also wanted to install signal handlers. Make
installing signal handlers synchronous so that the process-wide behavior
is predictable.
Update #9896.
Change-Id: Ice24299877ec46f8518b072a381932d273096a32
Reviewed-on: https://go-review.googlesource.com/18150
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
It's fairly common to call cgo functions with conversions to
unsafe.Pointer or other C types. Apply the simpler checking of address
expressions when possible when the address expression occurs within a
type conversion.
Change-Id: I5187d4eb4d27a6542621c396cad9ee4b8647d1cd
Reviewed-on: https://go-review.googlesource.com/18391
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
After a failure on the build dashboard I tested testcarchive test 2 and
found that it failed an average of 1 in 475 runs on my laptop. With
this change it ran over 50,000 times without failing. I bumped up the
other iteration limits to correspond.
Change-Id: I0155c68161a2c2a09ae25c91e9269f1e8702628d
Reviewed-on: https://go-review.googlesource.com/18309
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When calling a Go function on a C thread, if the C thread already has an
alternate signal stack, use that signal stack instead of installing a
new one.
Update #9896.
Change-Id: I62aa3a6a4a1dc4040fca050757299c8e6736987c
Reviewed-on: https://go-review.googlesource.com/18108
Reviewed-by: Russ Cox <rsc@golang.org>
Avoids an msan error when runtime/cgo is explicitly rebuilt with
-fsanitize=memory.
Fixes#13815.
Change-Id: I70308034011fb308b63585bcd40b0d1e62ec93ef
Reviewed-on: https://go-review.googlesource.com/18263
Reviewed-by: Russ Cox <rsc@golang.org>
Following the parallelization of some tests, a race condition can
occur in testcarchive, testshared and testcshared.
In some cases, it can result in the go env GOROOT command returning
corrupted data, which are then passed to a rm command.
Make the shell script more robust by not trusting the result of
the go env GOROOT command. It does not really fix the issue, but
at least prevent the entire repository to be deleted.
Updates #13789
Change-Id: Iaf04a7bd078ed3a82e724e35c4b86e6f756f2a2f
Reviewed-on: https://go-review.googlesource.com/18173
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
If non-Go code calls sigaltstack before a signal is received, use
sigaltstack to determine the current signal stack and set the gsignal
stack to use it. This makes the Go runtime more robust in the face of
non-Go code. We still can't handle a disabled signal stack or a signal
triggered with SA_ONSTACK clear, but we now give clear errors for those
cases.
Fixes#7227.
Update #9896.
Change-Id: Icb1607e01fd6461019b6d77d940e59b3aed4d258
Reviewed-on: https://go-review.googlesource.com/18102
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
Only install signal handlers for synchronous signals that become
run-time panics. Set the SA_ONSTACK flag for other signal handlers as
needed.
Fixes#13028.
Update #12465.
Update #13034.
Update #13042.
Change-Id: I28375e70641f60630e10f3c86e24b6e4f8a35cc9
Reviewed-on: https://go-review.googlesource.com/17903
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This file is not part of the benchmark shootout, and we wrote it, so use
the usual copyright header, not a partial version of the shootout
license.
Fixes#13575.
Change-Id: Ib610e2ad82914b4ef096a2424cfffe3383db2d5b
Reviewed-on: https://go-review.googlesource.com/17715
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The build tags are necessary to keep "go build" in that directory
building only stdio.go, but we have to arrange for test/run.go to
treat them as satisfied.
Fixes#12625.
Change-Id: Iec0cb2fdc2c9b24a4e0530be25e940aa0cc9552e
Reviewed-on: https://go-review.googlesource.com/17454
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
There is a report that fd 10 is already in use when run on some OS X machines.
I don't see how, and I can't reproduce the problem on my own OS X machine,
but it's easy enough to fix.
Fixes#12161.
Change-Id: I73511bdd91258ecda181d60d2829add746d1198b
Reviewed-on: https://go-review.googlesource.com/17451
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fix a typo in de5b386; using `$ver` to determine linux major/minor
versions would produce those for clang, use `$linuxver` instead.
Updates #12898.
Change-Id: I2c8e84ad02749fceaa958afd65e558bb0b08dddb
Reviewed-on: https://go-review.googlesource.com/17323
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
These are simply incompatible. Clang fixed the bug but not in older versions.
Fixes#12898.
Change-Id: I74a3fd9134dadab6d0f074f8fd09e00d64558d7a
Reviewed-on: https://go-review.googlesource.com/17254
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This makes it more convenient for C code to use GoString with string
constants. Since Go string values are immutable, the const qualifier is
appropriate in C.
Change-Id: I5fb3cdce2ce5079f1f0467a1544bb3a1eb27b811
Reviewed-on: https://go-review.googlesource.com/17067
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This also fixes an unintended behavior where C's "complex float" and
"complex double" types were interchangeable with Go's "complex64" and
"complex128" types.
Fixes#13402.
Change-Id: I73f96d9a4772088d495073783c6982e9634430e8
Reviewed-on: https://go-review.googlesource.com/17208
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Without the fix:
$ CC=clang-3.5 ./test.bash
misc/cgo/errors/test.bash: BUG: expected error output to contain "C.ushort" but saw:
# command-line-arguments
./issue13129.go:13: cannot use int(0) (type int) as type C.unsignedshort in assignment
Fixes#13129.
Change-Id: I2c019d2d000f5bfa3e33c477e533aff97031a84f
Reviewed-on: https://go-review.googlesource.com/17207
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Found by cmd/vet
Change-Id: I29dd207ecd40fe703054e8ad4e81b3267ca89da2
Reviewed-on: https://go-review.googlesource.com/17160
Reviewed-by: David Crawshaw <crawshaw@golang.org>
In the past, cgo generated Go code and C code. The C code was linked
into a shared library. The Go code was built into an executable that
dynamically linked against that shared library. C wrappers were
exported from the shared library, and the Go code called them.
It was all a long time ago, but in order to permit C code to call back
into Go, somebody implemented #pragma dynexport (https://golang.org/cl/661043)
to export a Go symbol into the dynamic symbol table. Then that same
person added code to cgo to recognize //export comments
(https://golang.org/cl/853042). The //export comments were implemented
by generating C code, to be compiled by GCC, that would refer to C code,
to be compiled by 6c, that would call the Go code. The GCC code would
go into a shared library. The code compiled by 6c would be in the Go
executable. The GCC code needed to refer to the 6c code, so the 6c
function was marked with #pragma dynexport. The important point here is
that #pragma dynexport was used to expose an internal detail of the
implementation of an exported function, because at the time it was
necessary.
Moving forward to today, cgo no longer generates a shared library and 6c
no longer exists. It's still true that we have a function compiled by
GCC that refers to a wrapper function now written in Go. In the normal
case today we are doing an external link, and we use a
//go:cgo_export_static function to make the Go wrapper function visible
to the C code under a known name.
The #pragma dynexport statement has become a //go:cgo_export_dynamic
comment on the Go code. That comment only takes effect when doing
internal linking. The comment tells the linker to put the symbol in the
dynamic symbol table. That still makes sense for the now unusual case
of using internal linking with a shared library.
However, all the changes to this code have carefully preserved the
property that the //go:cgo_export_dynamic comment refers to an internal
detail of the implementation of an exported function. That was
necessary a long time ago, but no longer makes sense.
This CL changes the code to put the actual C-callable function into the
dynamic symbol table. I considered dropping the comment entirely, but
it turns out that there is even a test for this, so I preserved it.
Change-Id: I66a7958e366e5974363099bfaa6ba862ca327849
Reviewed-on: https://go-review.googlesource.com/17061
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
If you set GODEBUG=cgocheck=2 the runtime package will use the write
barrier to detect cases where a Go program writes a Go pointer into
non-Go memory. In conjunction with the existing cgo checks, and the
not-yet-implemented cgo check for exported functions, this should
reliably detect all cases (that do not import the unsafe package) in
which a Go pointer is incorrectly shared with C code. This check is
optional because it turns on the write barrier at all times, which is
known to be expensive.
Update #12416.
Change-Id: I549d8b2956daa76eac853928e9280e615d6365f4
Reviewed-on: https://go-review.googlesource.com/16899
Reviewed-by: Russ Cox <rsc@golang.org>
Change the linker to use a copy of the C compiler support library,
libgcc.a, when doing internal linking. This will be used to satisfy any
undefined symbols referenced by host objects.
Change the dist tool to copy the support library into a new directory
tree under GOROOT/pkg/libgcc. This ensures that libgcc is available
even when building Go programs on a system that has no C compiler. The
C compiler is required when building the Go installation in the first
place, but is not required thereafter.
Change the go tool to not link libgcc into cgo objects.
Correct the linker handling of a weak symbol in an ELF input object to
not always create a new symbol, but to use an existing symbol if there
is one; this is necessary on freebsd-amd64, where libgcc contains a weak
definition of compilerrt_abort_impl.
Fixes#9510.
Change-Id: I1ab28182263238d9bcaf6a42804e5da2a87d8778
Reviewed-on: https://go-review.googlesource.com/16741
Reviewed-by: Russ Cox <rsc@golang.org>
I keep losing this utility, used as part of other tools to auto-update
the AUTHORS and CONTRIBUTORS files. Check it in to the repo so I
don't lose it, and so others can use it as well.
Updates #12042
Change-Id: Ib5886b85799087aaaddcec4c81169e2726322c05
Reviewed-on: https://go-review.googlesource.com/16824
Reviewed-by: Russ Cox <rsc@golang.org>
The runtime is not instrumented, but the calls to msanread in the
runtime can sometimes refer to the system stack. An example is the call
to copy in stkbucket in mprof.go. Depending on what C code has done,
the system stack may appear uninitialized to msan.
Change-Id: Ic21705b9ac504ae5cf7601a59189302f072e7db1
Reviewed-on: https://go-review.googlesource.com/16660
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This is a fix for the -msan option when using cgo callbacks. A cgo
callback works by writing out C code that puts a struct on the stack and
passes the address of that struct into Go. The result parameters are
fields of the struct. The Go code will write to the result parameters,
but the Go code thinks it is just writing into the Go stack, and
therefore won't call msanwrite. This CL adds a call to msanwrite in the
cgo callback code so that the C knows that results were written.
Change-Id: I80438dbd4561502bdee97fad3f02893a06880ee1
Reviewed-on: https://go-review.googlesource.com/16611
Reviewed-by: David Crawshaw <crawshaw@golang.org>
When using gccgo it's OK if a pointer passed to C remains on the stack.
Gccgo does not have the clear distinction between C and Go stacks.
Change-Id: I3af9dd6fe078214ab16d9d8dad2d206608d7891d
Reviewed-on: https://go-review.googlesource.com/16774
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
This implements part of the proposal in issue 12416 by adding dynamic
checks for passing pointers from Go to C. This code is intended to be
on at all times. It does not try to catch every case. It does not
implement checks on calling Go functions from C.
The new cgo checks may be disabled using GODEBUG=cgocheck=0.
Update #12416.
Change-Id: I48de130e7e2e83fb99a1e176b2c856be38a4d3c8
Reviewed-on: https://go-review.googlesource.com/16003
Reviewed-by: Russ Cox <rsc@golang.org>
This is, in effect, what the gc toolchain does. It fixes cases where Go
code refers to a C global variable; without this, if the global variable
was the only thing visible in the C code, the generated cgo file might
not get pulled in from the archive, leaving the Go variable
uninitialized.
This was reported against gccgo as https://gcc.gnu.org/PR68255 .
Change-Id: I3e769dd174f64050ebbff268fbbf5e6fab1e2a1b
Reviewed-on: https://go-review.googlesource.com/16775
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
And enable PIE in cmd/go because that's all it seems to take.
Change-Id: Ie017f427ace5e91de333a9f7cba9684c4641dfd5
Reviewed-on: https://go-review.googlesource.com/14222
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The current mechanism fails if clang cannot be executed by the current
user. Using the `-x` operator for `test` return TRUE if the file is
executable by the user.
Change-Id: I0f3c8dc3880c1ce5a8a833ff3109eb96853184af
Reviewed-on: https://go-review.googlesource.com/16752
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The existing go_darwin_arm_exec.go script does not work with Xcode 7,
not due to any significant changes, but just ordering and timing of
statements from lldb. Unfortunately the current design of
go_darwin_arm_exec.go makes it not obvious what gets stuck where, so
this moves from a moving buffer window to a complete buffer of the
lldb output.
The result is easier code to follow, and it works with Xcode 7.
Updates #12660.
Change-Id: I3b8b890b0bf4474119482e95d84e821a86d1eaed
Reviewed-on: https://go-review.googlesource.com/16634
Reviewed-by: Michael Matloob <matloob@golang.org>
The width of the type of an external variable defined with a type
literal may not be set when the instrumentation pass is run. There are
two cases in the standard library that fail without the call to dowidth:
../../../src/encoding/base32/base32.go:322: constant -1000000000 overflows uintptr
../../../src/encoding/base32/base32.go:329: constant -1000000000 overflows uintptr
../../../src/encoding/json/encode.go:385: constant -1000000000 overflows uintptr
../../../src/encoding/json/encode.go:387: constant -1000000000 overflows uintptr
Change-Id: I7c3334f7decdb7488595ffe4090cd262d7334283
Reviewed-on: https://go-review.googlesource.com/16331
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
On older versions of GCC we need to pass a file name before GCC will
report an unrecognized option.
Fixes#13065.
Change-Id: I7ed34c01a006966a446059025f7d10235c649072
Reviewed-on: https://go-review.googlesource.com/16589
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
The error message should indicate the name of the unset variable,
rather than the value. The value will alwayse be empty.
Change-Id: I6f6c165074dfce857b6523703a890d205423cd28
Reviewed-on: https://go-review.googlesource.com/16555
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Depends on external linking right now. I have no immediate use for
this, but wanted to check how hard it is to support as android/amd64
is coming and it will require PIE.
Change-Id: I65c6b19159f40db4c79cf312cd0368c2b2527bfd
Reviewed-on: https://go-review.googlesource.com/16072
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Also fix the msan_fail test. It was bogus, since it always aborted one
way or another.
Change-Id: Ic693327d1bddb7bc5c7d859ac047fc93cb9b5b1c
Reviewed-on: https://go-review.googlesource.com/16172
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
