zeroUpper32Bits wasn't checking for shift-extension ops. This would not
check shifts that were marking as bounded by prove (normally, shifts
are wrapped in a sequence that ends with an ANDL, and zeroUpper32Bits
would see the ANDL).
This produces no changes on generated output right now, but will be
important once CL196679 lands because many shifts will be marked
as bounded, and lower will stop generating the masking code sequence
around them.
Change-Id: Iaea94acc5b60bb9a5021c9fb7e4a1e2e5244435e
Reviewed-on: https://go-review.googlesource.com/c/go/+/226338
Reviewed-by: Keith Randall <khr@golang.org>
CL 181857 broke the translation of certain C types using cmd/cgo -godefs
because it stores each typedef, array and qualified type with their
parent type name in the translation cache.
Fix this by only considering the parent type for typedefs of anonymous
structs which is the only case where types might become ambiguous.
Updates #31891Fixes#37479Fixes#37621
Change-Id: I301a749ec89585789cb0d213593bb8b7341beb88
Reviewed-on: https://go-review.googlesource.com/c/go/+/226341
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Use a uniform function (named “quiesce”) to wait for possible signals
in a way that gives the kernel many opportunities to deliver them.
Simplify channel usage and concurrency in stress tests.
Use (*testing.T).Deadline instead of parsing the deadline in TestMain.
In TestStop, sleep forever in a loop if we expect the test to die from
a signal. That should reduce the flakiness of TestNohup, since
TestStop will no longer spuriously pass when run as a subprocess of
TestNohup.
Since independent signals should not interfere, run the different
signals in TestStop in parallel when testing in short mode.
Since TestNohup runs TestStop as a subprocess, and TestStop needs to
wait many times for signals to quiesce, run its test subprocesses
concurrently and in short mode — reducing the latency of that test by
more than a factor of 2.
The above two changes reduce the running time of TestNohup on my
workstation to ~345ms, making it possible to run much larger counts of
the test in the same amount of wall time. If the test remains flaky
after this CL, we can spend all or part of that latency improvement on
a longer settle time.
Updates #33174
Change-Id: I09206f213d8c1888b50bf974f965221a5d482419
Reviewed-on: https://go-review.googlesource.com/c/go/+/226138
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Make sure we don't use the rewrite ptr + (c + x) -> c + (ptr + x), as
that may create an ephemeral out-of-bounds pointer.
I have not seen an actual bug caused by this yet, but we've seen
them in the 386 port so I'm fixing this issue for amd64 as well.
The load-combining rules needed to be reworked somewhat to still
work without the above broken rule.
Update #37881
Change-Id: I8046d170e89e2035195f261535e34ca7d8aca68a
Reviewed-on: https://go-review.googlesource.com/c/go/+/226437
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This adds support for the -gnu option on Go objdump. When
this option is used, then output will include gnu
assembly in comments alongside the Go assembly.
The objdump test was updated to test this new option.
This option is supported for the arches found in
golang.org/x that provide the GNUsyntax function.
Updates #34372
Change-Id: I9e60e1691526607dda3c857c4564dcef408b8391
Reviewed-on: https://go-review.googlesource.com/c/go/+/225459
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Currently there are a few sanity checks in the page allocator which
should fail immediately but because it's a check for a negative number
on a uint, it's actually dead-code.
If there's a bug in the page allocator which would cause the sanity
check to fail, this could cause memory corruption by returning an
invalid address (more precisely, one might either see a segfault, or
span overlap).
This change fixes these sanity checks to check the correct condition.
Fixes#38130.
Change-Id: Ia19786cece783d39f26df24dec8788833a6a3f21
Reviewed-on: https://go-review.googlesource.com/c/go/+/226297
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The type annotation of some trim functions are inconsistent with all
other function signatures of the strings package.
Example:
func TrimRight(s string, cutset string) string
To be:
func TrimRight(s, cutset string) string
Change-Id: I456a33287bfb4ad6a7962e30a6424f209ac320c1
Reviewed-on: https://go-review.googlesource.com/c/go/+/226339
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Previously, details about the underlying fetch error
were not visible in the net/http error text:
net/http: fetch() failed: <object>
When using the message property, they are:
net/http: fetch() failed: Failed to fetch
net/http: fetch() failed: The user aborted a request.
Reference: https://developer.mozilla.org/en-US/docs/Web/API/DOMException/message.
Change-Id: Iecf7c6bac01abb164731a4d5c9af6582c250a1a0
Reviewed-on: https://go-review.googlesource.com/c/go/+/226205
Reviewed-by: Johan Brandhorst <johan.brandhorst@gmail.com>
This addresses comments made by Russ after
https://golang.org/cl/174122 was merged. It addes a test
for the connection validator and renames the interface to just
"Validator".
Change-Id: Iea53e9b250c9be2e86e9b75906e7353e26437c5c
Reviewed-on: https://go-review.googlesource.com/c/go/+/223963
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Go build scripts on UNIX (make.bash, all.bash) have not required
GOROOT_BOOTSTRAP since August 2017 (CL 57753). Windows build scripts
have followed suit since CL 96455. Most people building Go will have
a Go toolchain in their PATH and will not need to specify a different
toolchain.
This CL removes the GOROOT_BOOTSTRAP mention from the contribution guide
(it was there for Windows only, but it's not required anymore). The guide
is meant to be light and clear for beginners and is not supposed to be
a reference, so there's not need to keep mentioning GOROOT_BOOTSTRAP.
Also update install-source.html to reflect the current status quo,
where using the PATH is probably the first and most used default, and
GOROOT_BOOTSTRAP is just an option.
Change-Id: Iab453e61b0c749c256aaaf81ea9b2ae58822cb89
Reviewed-on: https://go-review.googlesource.com/c/go/+/224717
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Instead of calling netpollwakeup, just do the write in netpollBreak.
Use the same signaling we now use in other netpollBreak instances.
Change-Id: I53a65c22862ecc8484aee91d0e1ffb21a9e62d8c
Reviewed-on: https://go-review.googlesource.com/c/go/+/226199
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Removes two variables:
- days which is unused, and similar usage provided by longDayNames
- months in favour of using longMonthNames
Fixes#36359
Change-Id: I51b6b7408db9359c658462ba73e59ed432f655a6
GitHub-Last-Rev: 778d3ea157
GitHub-Pull-Request: golang/go#36372
Reviewed-on: https://go-review.googlesource.com/c/go/+/213177
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This reverts CL 225618.
This is causing TestNetpollBreak to fail on AIX more often than not.
Change-Id: Ia3c24041ead4b320202f7f5b17a6b286f639a689
Reviewed-on: https://go-review.googlesource.com/c/go/+/226198
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
add dark mode to CFGs in the ssa.html output by targeting individual
parts of each svg and applying dark mode styles to the stroke & fill.
Fixes#37767
Change-Id: Ic867e161c6837c26d9d735ea02bc94fdb56102f6
Reviewed-on: https://go-review.googlesource.com/c/go/+/222877
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Simplify the printing of PackageErrors by pushing and popping packages
from the import stack when creating the error, rather than when printing
the error. In some cases, we don't have the same amount of information
to recreate the exact error, so we'll print the name of the package
the error is for, even when it's redundant. In the case of import cycle
errors, this change results in the addition of the position information
of the error.
This change supercedes CLs 220718 and 217106. It introduces a simpler
way to format errors.
Fixes#36173
Change-Id: Ie27011eb71f82e165ed4f9567bba6890a3849fc1
Reviewed-on: https://go-review.googlesource.com/c/go/+/224660
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
netpollBreak calls netpollwakeup, and netpollwakeup expects the mtxpoll
lock to be held, so that it has exclusive access to pendingUpdates.
Not acquiring the lock was a mistake in CL 171824. Fortunately it
rarely matters in practice.
Change-Id: I32962ec2575c846ef3d6a91a4d821b2ff02d983c
Reviewed-on: https://go-review.googlesource.com/c/go/+/225618
Reviewed-by: Michael Knyszek <mknyszek@google.com>
On linux-386 builders run the TestExtraFiles subprocess under strace,
in hopes of finding out where the unexpected descriptor is coming from.
For #25628
Change-Id: I9a62d6a5192a076525a616ccc71de74bbe7ebd58
Reviewed-on: https://go-review.googlesource.com/c/go/+/225799
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Retrying CL 222782, with a fix that will hopefully stop the random crashing.
The issue with the previous CL is that it does pointer arithmetic
in a way that may briefly generate an out-of-bounds pointer. If an
interrupt happens to occur in that state, the referenced object may
be collected incorrectly.
Suppose there was code that did s[x+c]. The previous CL had a rule
to the effect of ptr + (x + c) -> c + (ptr + x). But ptr+x is not
guaranteed to point to the same object as ptr. In contrast,
ptr+(x+c) is guaranteed to point to the same object as ptr, because
we would have already checked that x+c is in bounds.
For example, strconv.trim used to have this code:
MOVZX -0x1(BX)(DX*1), BP
CMPL $0x30, AL
After CL 222782, it had this code:
LEAL 0(BX)(DX*1), BP
CMPB $0x30, -0x1(BP)
An interrupt between those last two instructions could see BP pointing
outside the backing store of the slice involved.
It's really hard to actually demonstrate a bug. First, you need to
have an interrupt occur at exactly the right time. Then, there must
be no other pointers to the object in question. Since the interrupted
frame will be scanned conservatively, there can't even be a dead
pointer in another register or on the stack. (In the example above,
a bug can't happen because BX still holds the original pointer.)
Then, the object in question needs to be collected (or at least
scanned?) before the interrupted code continues.
This CL needs to handle load combining somewhat differently than CL 222782
because of the new restriction on arithmetic. That's the only real
difference (other than removing the bad rules) from that old CL.
This bug is also present in the amd64 rewrite rules, and we haven't
seen any crashing as a result. I will fix up that code similarly to
this one in a separate CL.
Update #37881
Change-Id: I5f0d584d9bef4696bfe89a61ef0a27c8d507329f
Reviewed-on: https://go-review.googlesource.com/c/go/+/225798
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
gentraceback generates PCs which are usually following the CALL
instruction. For those that aren't, it fixes up the PCs so that
functions processing the output can unconditionally decrement the PC.
runtime_expandInlineFrames does this unconditional decrement when
looking up the function. However, the fake stack frame generated for
overflow records fails to meet the contract, and decrementing the PC
results in a PC in the previous function. If that function contains
inlined call, runtime_expandInlineFrames will not short-circuit and will
panic trying to look up a PC that doesn't exist.
Note that the added test does not fail at HEAD. It will only fail (with
a panic) if the function preceeding lostProfileEvent contains inlined
function calls. At the moment (on linux/amd64), that is
runtime/pprof.addMaxRSS, which does not.
Fixes#38096
Change-Id: Iad0819f23c566011c920fd9a5b1254719228da0b
Reviewed-on: https://go-review.googlesource.com/c/go/+/225661
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
These hard-coded timeouts make the tests flaky on slow builders (such
as solaris-amd64-oraclerel), and make test failures harder to diagnose
anyway (by replacing dumps of the stuck goroutine stacks with failure
messages that do not describe the stuck goroutines). Eliminate them
and simplify the tests.
Fixes#37327Fixes#38112
Change-Id: Id40febe349d134ef53c702e36199bfbf2b6468ff
Reviewed-on: https://go-review.googlesource.com/c/go/+/225977
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
There might be some concurrent (maybe not concurrent, just sequential but in a short time window) and duplicate calls to `netpollBreak`, trying to wake up a net-poller. If one has called `netpollBreak` and that waking event hasn't been received by epollwait/kevent/..., then the subsequent calls of `netpollBreak` ought to be ignored or in other words, these calls should be converged into one.
Benchmarks go1.13.5 darwin/amd64:
benchmark-func time/op (old) time/op (new) delta
BenchmarkNetpollBreak-4 29668ns ±1% 3131ns ±2% -89.45%
mem/B (old) mem/B (new) delta
154B ±13% 0B ±0% -100%
Change-Id: I3cf757a5d6edc5a99adad7aea3baee4b7f2a8f5c
GitHub-Last-Rev: 15bcfbab8a
GitHub-Pull-Request: golang/go#36294
Reviewed-on: https://go-review.googlesource.com/c/go/+/212737
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Installing to GOROOT makes tests non-parallelizable, since each test
depends on the installed contents of GOROOT already being up-to-date
and may reasonably assume that those contents do not change over the
course of the test.
Fixes#37573
Updates #30316
Change-Id: I2afe95ad11347bee3bb7c2d77a657db6d691cf05
Reviewed-on: https://go-review.googlesource.com/c/go/+/225897
Reviewed-by: Michael Matloob <matloob@golang.org>
https://golang.org/doc/contribute.html#quick_test currently suggests
running 'make.bash' and 'run.bash' separately, but 'run.bash'
potentially uses a 'go' command resolved from the wrong GOROOT,
which in turn sets the wrong GOROOT for further commands.
Updates #32674
Updates #17896
Change-Id: I4925d478d0fc7351c4f6d40830ab17d4d688348d
Reviewed-on: https://go-review.googlesource.com/c/go/+/223741
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Katie Hockman <katie@golang.org>
This reverts CL 223257.
Reason for revert: broke TestScript/mod_gonoproxy on the longtest builders.
Change-Id: I8637c52c5a7d5333a37ed1e9998c49786525ecb1
Reviewed-on: https://go-review.googlesource.com/c/go/+/225757
Reviewed-by: Michael Matloob <matloob@golang.org>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The plan9-arm builder has a very slow filesystem and frequently times
out on this test. The api check verifies the API for all supported
GOOS/GOARCH/CGO_ENABLED combination anyway, so if we skip it on one
builder (or even most builders) there should be no loss of coverage.
Updates #37951
Change-Id: I86a93df2ec60a6af6d942e3954eef09ce67bb39e
Reviewed-on: https://go-review.googlesource.com/c/go/+/225662
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
URLs in GOPROXY may now be separated with commas (,) or pipes (|). If
a request to a proxy fails with any error (including connection errors
and timeouts) and the proxy URL is followed by a pipe, the go command
will try the request with the next proxy in the list. If the proxy is
followed by a comma, the go command will only try the next proxy if
the error a 404 or 410 HTTP response.
The go command will determine how to connect to the checksum database
using the same logic. Before accessing the checksum database, the go
command sends a request to <proxyURL>/sumdb/<sumdb-name>/supported.
If a proxy responds with 404 or 410, or if any other error occurs and
the proxy URL in GOPROXY is followed by a pipe, the go command will
try the request with the next proxy. If all proxies respond with 404
or 410 or are configured to fall back on errors, the go command will
connect to the checksum database directly.
This CL does not change the default value or meaning of GOPROXY.
Fixes#37367
Change-Id: If53152ec1c3282c67d4909818b666af58884fb2c
Reviewed-on: https://go-review.googlesource.com/c/go/+/223257
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
EnvForDir does not immediately evoke “append”, and thus may not prompt
the reader to consider the possibility of aliasing bugs (as in
issue #38077). To make this behavior more obvious at the call site, rename
cmd/go/internal/base.EnvForDir to AppendPWD and swap the order of
arguments to a conventional “append” function (similar to those in the
strconv package).
For #38077
Change-Id: I16f09aa0fa8a269d51f0511eb402a44e2759eb94
Reviewed-on: https://go-review.googlesource.com/c/go/+/225578
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
Appending to a global slice is only safe if its length is already
equal to its capacity. That property is not guaranteed for slices in
general, and empirically does not hold for this one.
This is a minimal fix to make it easier to backport.
A more robust cleanup of the base.EnvForDir function will be sent in a
subsequent CL.
Fixes#38077
Updates #37940
Change-Id: I731d5bbd0e516642c2cf43e713eeea15402604e5
Reviewed-on: https://go-review.googlesource.com/c/go/+/225577
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
Currently, the capping logic for the GC trigger ratio is such that if
gcpercent is low, we may end up setting the trigger ratio far too high,
breaking the promise of SetGCPercent and GOGC has a trade-off knob (we
won't start a GC early enough, and we will use more memory).
This change modifies the capping logic for the trigger ratio by scaling
the minTriggerRatio with gcpercent the same way we scale
maxTriggerRatio.
Fixes#37927.
Change-Id: I2a048c1808fb67186333d3d5a6bee328be2f35da
Reviewed-on: https://go-review.googlesource.com/c/go/+/223937
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This makes all modern public keys in the standard library implement a
common interface (below) that can be used by applications for better
type safety and allows for checking that public (and private keys via
Public()) are equivalent.
interface {
Equal(crypto.PublicKey) bool
}
Equality for ECDSA keys is complicated, we take a strict interpretation
that works for all secure applications (the ones not using the
unfortunate non-constant time CurveParams implementation) and fails
closed otherwise.
Tests in separate files to make them x_tests and avoid an import loop
with crypto/x509.
Re-landing of CL 223754. Dropped the test that was assuming named curves
are not implemented by CurveParams, because it's not true for all
curves, and anyway is not a property we need to test. There is still a
test to check that different curves make keys not Equal.
Fixes#21704Fixes#38035
Reviewed-on: https://go-review.googlesource.com/c/go/+/223754
Reviewed-by: Katie Hockman <katie@golang.org>
Change-Id: I736759b145bfb4f7f8eecd78c324315d5a05385c
Reviewed-on: https://go-review.googlesource.com/c/go/+/225460
Run-TryBot: Filippo Valsorda <filippo@golang.org>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Variable 'procs' used to calculate the threshold of overuse in
TestPhysicalMemoryUtilization should be updated if GOMAXPROCS
gets changed, otherwise the threshold could be a large number,
making the test meaningless.
Change-Id: I876cbf11457529f56bae77af1e35f4538a721f95
Reviewed-on: https://go-review.googlesource.com/c/go/+/210297
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Make the code more consistent with the rest of the file.
Should have caught this in review of CL 225357.
Change-Id: I12824cb436539c31604684e043ebb7587cc92471
Reviewed-on: https://go-review.googlesource.com/c/go/+/225557
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Write the test output to the temporary directory, not the current
directory.
May fix linux-mips64le-mengzhuo builder.
Change-Id: Ibfeb3d2879c11d498abc31df4efe776fc09a6ad6
Reviewed-on: https://go-review.googlesource.com/c/go/+/225440
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Bonventre <andybons@golang.org>
Currently if a goroutine is preempted while owning a timer in the
timerModifying state, it could self-deadlock. When the goroutine is
preempted and calls into the scheduler, it could call checkTimers. If
checkTimers encounters the timerModifying timer and calls runtimer on
it, then runtimer will spin, waiting for that timer to leave the
timerModifying state, which it never will.
So far we got lucky that for the most part that there were no preemption
points while timerModifying is happening, however CL 221077 seems to
have introduced one, leading to sporadic self-deadlocks.
This change disables preemption explicitly while a goroutines holds a
timer in timerModifying. Since only checkTimers (and thus runtimer) is
called from the scheduler, this is sufficient to prevent
preemption-based self-deadlocks.
Fixes#38070.
Updates #37894.
Change-Id: Idbfac310889c92773023733ff7e2ff87e9896f0c
Reviewed-on: https://go-review.googlesource.com/c/go/+/225497
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This partially undoes the optimizations of CL 177597, but makes up
some of the difference by caching the package list and import metadata
and making the initial calls concurrently, including in TestMain.
That reduces the critical path from two sequential 'go list'
invocations to just one (run many times concurrently), and eliminates
the need for assumptions about the consistency of the 'std' dependency
graph across platforms (and hard-coded special cases for packages that
violate those assumptions).
In the process, this simplifies and fixes TestBenchmark (which has
been silently broken since CL 164623).
This increases 'time go tool dist test api' on my workstation from
0m8.4s / 0m13.8s / 0m1.7s to 0m10.5s / 0m23.1s / 0m5.1s,
compared to 0m12.4s / 0m23.2s / 0m4.7s before CL 177597.
(That is, this change retains about half of the wall-time speedup, but
almost none of the user-time speedup.)
Tested manually using 'go test -race -bench=. cmd/api'.
Fixes#37951
Change-Id: Icd537e035e725e1ee7c41d97da5c6651233b927e
Reviewed-on: https://go-review.googlesource.com/c/go/+/224619
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alexander Rakoczy <alex@golang.org>
On arm64, a function's address is 16 bytes aligned, and
the assembler aligns the size of function symbol to 16 bytes,
so to keep the consistent, this patch changes the function
alignment in the linker to 16 bytes.
Change-Id: I4d1e89a56200453b7b586fe3f4656bada7544214
Reviewed-on: https://go-review.googlesource.com/c/go/+/225397
Reviewed-by: eric fang <eric.fang@arm.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Recently, we get requirements of instructions and functions alignment
from the gVisor project. To fit the alignment requirement of interrupt
table, they require an instruction's address to be aligned 128 bytes
and a function's entry address to be aligned 2K bytes. Thus we add
support for PCALIGN directive first. Below is a discussion about this
topic. https://groups.google.com/forum/m/#!topic/golang-dev/RPj90l5x86I
Functions in Go are aligned to 16 bytes on arm64, thus now we only
support 8 and 16 bytes alignment.
This patch adds support for PCALIGN directive. This directive can be
used within Go asm to align instruction by padding NOOP directives.
This patch also adds a test to verify the correnctness of the PCALIGN
directive. The test is contributed by Fannie Zhang <Fannie.Zhang@arm.com>.
Change-Id: I709e6b94847fe9e1824f42f4155355f90c63d523
Reviewed-on: https://go-review.googlesource.com/c/go/+/207117
Reviewed-by: eric fang <eric.fang@arm.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The "runindir" tests used "go run", but relied on relative imports
(which are not supported by "go run" in module mode). Instead, such
tests must use fully-qualified imports, which require either a go.mod
file (in module mode) or that the package be in an appropriate
subdirectory of GOPATH/src (in GOPATH mode).
To set up such a directory, we use yet another copy of the same
overlayDir function currently found in the misc subdirectory of this
repository.
Fixes#33912
Updates #30228
Change-Id: If3d7ea2f7942ba496d98aaaf24a90bcdcf4df9f7
Reviewed-on: https://go-review.googlesource.com/c/go/+/225205
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The load and test instructions compare the given value
against zero and will produce a condition code indicating
one of the following scenarios:
0: Result is zero
1: Result is less than zero
2: Result is greater than zero
3: Result is not a number (NaN)
The instruction can be used to simplify floating point comparisons
against zero, which can enable further optimizations.
This CL also reduces the size of .text section of math.test binary by around
0.7 KB (in hexadecimal, from 1358f0 to 135620).
Change-Id: I33cb714f0c6feebac7a1c46dfcc735e7daceff9c
Reviewed-on: https://go-review.googlesource.com/c/go/+/209159
Reviewed-by: Michael Munday <mike.munday@ibm.com>
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The s390x assembly implementation was previously only handling this
case correctly for x = -Pi. Update the special case handling for
any y.
Fixes#35446
Change-Id: I355575e9ec8c7ce8bd9db10d74f42a22f39a2f38
Reviewed-on: https://go-review.googlesource.com/c/go/+/223420
Run-TryBot: Brian Kessler <brian.m.kessler@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Munday <mike.munday@ibm.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Where possible, fold constants into versions of instructions that take
an immediate. This avoids the need to allocate a register and load the
immediate into it.
Change-Id: If911ca41235e218490679aed2ce5f48bf807a2b3
Reviewed-on: https://go-review.googlesource.com/c/go/+/222639
Run-TryBot: Joel Sing <joel@sing.id.au>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
