riscv64 now has atomic intrinsics, so re-enable the atomic intrinsic tests.
Fixes#36765
Change-Id: I838f27570a94d7fa5774c43f1ca5f4df2ca104cf
Reviewed-on: https://go-review.googlesource.com/c/go/+/223560
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
For #25628
Change-Id: If1dce7ba9310e1418e67b9954c989471b775a28e
Reviewed-on: https://go-review.googlesource.com/c/go/+/225278
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This fixes a potential issue with the previous implementation
of PCALIGN on ppc64. Previously PCALIGN was processed inside of
asmout and indicated the padding size by setting the value in
the optab, changing it back after the alignment instructions
were added. Now PCALIGN is processed outside of asmout, and optab
is not changed.
Change-Id: I8b0093a0e2b7e06176af27e05150d04ae2c55d60
Reviewed-on: https://go-review.googlesource.com/c/go/+/225198
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
As of the Go 1.11 release we require at least Windows 7, so CancelIoEx
is always available. This lets us simplify the code to not require
dedicated threads to handle I/O requests.
Fixes#37956
Change-Id: If1dc4ac4acb61c43e4f2a9f26f225869050262a5
Reviewed-on: https://go-review.googlesource.com/c/go/+/225060
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
newdefer() actually adds the new defer to the current g's defer chain. That
happens even if we are on the system stack, in which case the g will be the g0
stack. For open-coded defers, we call newdefer() (only during panic processing)
while on the system stack, so the new defer is unintentionally added to the
g0._defer defer list. The code later correctly adds the defer to the user g's
defer list.
The g0._defer list is never used. However, that pointer on the g0._defer list can
keep a defer struct alive that is intended to be garbage-collected (smaller defers
use a defer pool, but larger-sized defer records are just GC'ed). freedefer() does
not zero out pointers when it intends that a defer become garbage-collected. So,
we can have the pointers in a defer that is held alive by g0._defer become invalid
(in particular d.link). This is the cause of the bad pointer bug in this issue
The fix is to change newdefer (only used in two places) to not add the new defer
to the gp._defer list. We just do it after the call with the correct gp pointer.
(As mentioned above, this code was already there after the newdefer in
addOneOpenDeferFrame.) That ensures that defers will be correctly
garbage-collected and eliminate the bad pointer.
This fix definitely fixes the original repro. I added a test and tried hard to
reproduce the bug (based on the original repro code), but awasn't actually able to
cause the bug. However, the test is still an interesting mix of heap-allocated,
stack-allocated, and open-coded defers.
Fixes#37688
Change-Id: I1a481b9d9e9b9ba4e8726ef718a1f4512a2d6faf
Reviewed-on: https://go-review.googlesource.com/c/go/+/224581
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
We used to fall back to GetQueuedCompletionStatus if
GetQueuedCompletionStatus was not available, but as of Go 1.11 we
require Windows 7 or later, so GetQueuedCompletionStatusEx is always
available.
Fixes#37957
Change-Id: I7d8d49a92ab7b1f5afdc54a442f696aaf4a5168e
Reviewed-on: https://go-review.googlesource.com/c/go/+/225059
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Reduce the length of time that other timer functions can see timerModifying.
In particular avoid system calls.
Fixes#38023
Change-Id: I1b61229c668e6085d9ee6dca9488a90055386c36
Reviewed-on: https://go-review.googlesource.com/c/go/+/224902
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
'go mod download' is equivalent to 'go mod download all'.
Fixes#38031
Change-Id: I7aec7e5a1370a3e248eba6daad9a75ec21f33a83
Reviewed-on: https://go-review.googlesource.com/c/go/+/225201
Run-TryBot: Jay Conrod <jayconrod@google.com>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This reverts commit CL 222782.
Reason for revert: Reverting to see if 386 errors go away
Update #37881
Change-Id: I74f287404c52414db1b6ff1649effa4ed9e5cc0c
Reviewed-on: https://go-review.googlesource.com/c/go/+/225218
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The callers expect negative errno values, so negate them when necessary.
No test because there is no reasonable way to make pipe/pipe2 fail.
This was reported on a system on which pipe2 returned ENOSYS.
Fixes#37997
Change-Id: I3ad6cbbc2521cf495f8df6ec991a3f781122b508
Reviewed-on: https://go-review.googlesource.com/c/go/+/224592
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
In Webpack, require("fs") will always be empty. This behavior throws an error: "fs.writeSync is not function". It happens when you did "fmt.Println".
This PR avoids such problem and use polyfill in wasm_exec.js on Webpack.
Change-Id: I55f2c75ce86b7f84d2d92e8e217b5decfbe3c8a1
GitHub-Last-Rev: aecc847e3f
GitHub-Pull-Request: golang/go#35805
Reviewed-on: https://go-review.googlesource.com/c/go/+/208600
Reviewed-by: Richard Musiol <neelance@gmail.com>
List test packages (when list is run with -e) even when the main package
has an error. This is useful to get complete data for go/packages.
Fixes#37971
Change-Id: If6ba0270a319ea5e003d1ed8b1ad39e479e95509
Reviewed-on: https://go-review.googlesource.com/c/go/+/224944
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This reverts CL 223754.
Reason for revert: new tests are failing on all longtest builders.
Change-Id: I2257d106c132f3a02c0af6b20061d4f9a8093c4f
Reviewed-on: https://go-review.googlesource.com/c/go/+/225077
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Katie Hockman <katie@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
For each experiment that has been enabled in the toolchain, define a build tag
with the same name (but prefixed by "goexperiment.") which can be used for
compiling alternative files for the experiment. This allows changes for the
experiment, like extra struct fields in the runtime, without affecting the base
non-experiment code at all.
I use this capability in my CL for static lock ranking
(https://go-review.googlesource.com/c/go/+/207619), so that static lock ranking
can be fully enabled as a GOEXPERIMENT, but there is no overhead in the runtime
when the experiment is not enabled.
I added a test in cmd/go/testdata/scripts to make sure the build tags are being
defined properly. In order to implement the test, I needed to provide environment
variable GOEXPSTRING to the test scripts (with its value set from
objabi.Expstring(), so that it can determine the experiments baked into the
toolchain.
I filed https://github.com/golang/go/issues/37937 to make a builder with
GOEXPERIMENT set to 'staticlockranking'. This builder will ensure another variant
of GOEXPERIMENT is being tested regularly for this change, as well as checking
static lock ranking in the runtime.
Change-Id: Ieb4b86107238febd105558c1e639d30cfe57ab5c
Reviewed-on: https://go-review.googlesource.com/c/go/+/222925
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Rolling back portions of CL 222782 to see if that helps
issue #37881 any.
Update #37881
Change-Id: I9cc3ff8c469fa5e4b22daec715d04148033f46f7
Reviewed-on: https://go-review.googlesource.com/c/go/+/224837
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This makes all modern public keys in the standard library implement a
common interface (below) that can be used by applications for better
type safety and allows for checking that public (and private keys via
Public()) are equivalent.
interface {
Equal(crypto.PublicKey) bool
}
Equality for ECDSA keys is complicated, we take a strict interpretation
that works for all secure applications (the ones not using the
unfortunate non-constant time CurveParams implementation) and fails
closed otherwise.
Tests in separate files to make them x_tests and avoid an import loop
with crypto/x509.
Fixes#21704
Change-Id: Id5379c96384a11c5afde0614955360e7470bb1c4
Reviewed-on: https://go-review.googlesource.com/c/go/+/223754
Reviewed-by: Katie Hockman <katie@golang.org>
Discovered this after rebasing CL196679 (use poset bounds in prove).
Some tests fail with that CL applied:
codegen/smallintiface.go:11: linux/amd64/: opcode not found: "^LEAQ\\truntime.staticuint64s\\+8\\(SB\\)"
codegen/smallintiface.go:16: linux/amd64/: opcode not found: "^LEAQ\\truntime.staticuint64s\\+2024\\(SB\\)"
codegen/smallintiface.go:21: linux/amd64/: opcode not found: "^LEAQ\\truntime.staticuint64s\\+24\\(SB\\)"
The only difference in prove SSA dumps is that a single Lsh64x64
op with constant shift (<< 3) is marked as bounded. This triggers
a different rule matching sequence in lower, which manages to generate
worse code for the above testcases.
This CL fixes the above test after CL196679 is applied. Right now,
these rules never trigger (this CL passes toolstash -cmp), so I can't
write a test.
Change-Id: I353f1c79c1875cac1da82cd8afa1e05e42684f1c
Reviewed-on: https://go-review.googlesource.com/c/go/+/224877
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The existing Certificate.CreateCRL method generates non-conformant CRLs and
as such cannot be used for implementations that require standards
compliance. This change implements a new top level method, CreateCRL, which
generates compliant CRLs, and offers an extensible API if any
extensions/fields need to be supported in the future.
Here is an example Issuer/CRL generated using this change:
-----BEGIN CERTIFICATE-----
MIIBNjCB3aADAgECAgEWMAoGCCqGSM49BAMCMBIxEDAOBgNVBAMTB3Rlc3Rpbmcw
IhgPMDAwMTAxMDEwMDAwMDBaGA8wMDAxMDEwMTAwMDAwMFowEjEQMA4GA1UEAxMH
dGVzdGluZzBZMBMGByqGSM49AgEGCCqGSM49AwEHA0IABLHrudbSM36sn1VBrmm/
OfQTyEsI4tIUV1VmneOKHL9ENBGCiec4GhQm2SGnDT/sZy2bB3c3yozh/roS6cZJ
UZqjIDAeMA4GA1UdDwEB/wQEAwIBAjAMBgNVHQ4EBQQDAQIDMAoGCCqGSM49BAMC
A0gAMEUCIQCoAYN6CGZPgd5Sw5a1rd5VexciT5MCxTfXj+ZfJNfoiAIgQVCTB8AE
Nm2xset7+HOgtQYlKNw/rGd8cFcv5Y9aUzo=
-----END CERTIFICATE-----
-----BEGIN X509 CRL-----
MIHWMH0CAQEwCgYIKoZIzj0EAwIwEjEQMA4GA1UEAxMHdGVzdGluZxgPMDAwMTAx
MDIwMDAwMDBaGA8wMDAxMDEwMzAwMDAwMFowFjAUAgECGA8wMDAxMDEwMTAxMDAw
MFqgHjAcMA4GA1UdIwQHMAWAAwECAzAKBgNVHRQEAwIBBTAKBggqhkjOPQQDAgNJ
ADBGAiEAjqfj/IG4ys5WkjrbTNpDbr+saHGO/NujLJotlLL9KzgCIQDm8VZPzj0f
NYEQgAW4nsiUzlvEUCoHMw0141VCZXv67A==
-----END X509 CRL-----
Fixes#35428
Change-Id: Id96b6f47698d0bed39d586b46bd12374ee6ff88f
GitHub-Last-Rev: c83a601716
GitHub-Pull-Request: golang/go#36945
Reviewed-on: https://go-review.googlesource.com/c/go/+/217298
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change modifies the implementation of (*mspan).countAlloc by
using OnesCount64 (which on many systems is intrinsified). It does so by
using an unsafe pointer cast, but in this case we don't care about
endianness because we're just counting bits set.
This change means we no longer need the popcnt table which was redundant
in the runtime anyway. We can also simplify the logic here significantly
by observing that mark bits allocations are always 8-byte aligned, so we
don't need to handle any edge-cases due to the fact that OnesCount64
operates on 64 bits at a time: all irrelevant bits will be zero.
Overall, this implementation is significantly faster than the old one on
amd64, and should be similarly faster (or better!) on other systems
which support the intrinsic. On systems which do not, it should be
roughly the same performance because OnesCount64 is implemented using a
table in the general case.
Results on linux/amd64:
name old time/op new time/op delta
MSpanCountAlloc/bits=64-4 16.8ns ± 0% 12.7ns ± 0% -24.40% (p=0.000 n=5+4)
MSpanCountAlloc/bits=128-4 23.5ns ± 0% 12.8ns ± 0% -45.70% (p=0.000 n=4+5)
MSpanCountAlloc/bits=256-4 43.5ns ± 0% 12.8ns ± 0% -70.67% (p=0.000 n=4+5)
MSpanCountAlloc/bits=512-4 59.5ns ± 0% 15.4ns ± 0% -74.12% (p=0.008 n=5+5)
MSpanCountAlloc/bits=1024-4 116ns ± 1% 23ns ± 0% -79.84% (p=0.000 n=5+4)
Change-Id: Id4c994be22224653af5333683a69b0937130ed04
Reviewed-on: https://go-review.googlesource.com/c/go/+/216558
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
This change adds a small microbenchmark for (*mspan).countAlloc, which
we're about to replace. Admittedly this isn't a critical piece of code,
but the benchmark was useful in understanding the performance change.
Change-Id: Iea93c00f571ee95534a42f2ef2ab026b382242b3
Reviewed-on: https://go-review.googlesource.com/c/go/+/224438
Run-TryBot: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently if we try to alias an intrinsic which hasn't been defined for
any architecture (such as by accidentally creating the alias before the
intrinsic is created with addF), then we'll just silently not apply any
intrinsics to those aliases.
Catch this particular case by panicking in alias if we try to apply the
alias and it did nothing.
Change-Id: I98e75fc3f7206b08fc9267cedb8db3e109ec4f5d
Reviewed-on: https://go-review.googlesource.com/c/go/+/224637
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Currently runtime/internal/sys bit-manipulation functions are aliased to
math/bits functions, which are intrinsified. Unfortunately these aliases
are declared before the intrinsified versions are generated, resulting
in the generic version of the code being copied over.
This change moves the aliases for bit operations in runtime/internal/sys
after the addF calls to generate those intrinsics in SSA, so that the
intrinsified SSA representation of those functions actually get copied
over.
This should improve the overall performance of the runtime (especially
the page allocator) since these bit operations will actually be
intrinsified now.
Change-Id: I4377da13f9a7bb6aee608e50df0297148bf8f806
Reviewed-on: https://go-review.googlesource.com/c/go/+/224437
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
In golang.org/cl/171464, we cleaned up generation of .stkobj linker
symbols, but we couldn't figure out why a similar cleanup to
.args_stackmap linker symbols caused problems.
The issue is that we only need/want to generate .args_stackmap for
functions that are implemented in assembly in the same package. When
"pulling" a function from another package via //go:linkname, we can
safely skip emitting .args_stackmap, because compiling that package
will have generated it, if necessary.
Fixes#31615.
Change-Id: If8680aa7dd5b4e8f268b6b032d746f1b8536c867
Reviewed-on: https://go-review.googlesource.com/c/go/+/223238
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
CL 57753 added support to make.bash and make.rc to
default GOROOT_BOOTSTRAP to 'go env GOROOT'. This
patch does the same in make.bat for Windows.
Updates #18545Fixes#28641
Change-Id: I9152cc5080ed219b4de5bad0bd12d7725422ee1a
Reviewed-on: https://go-review.googlesource.com/c/go/+/96455
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Batch files should use CRLF endings. LF endings mostly
work but in some situations they cause random errors like
goto commands failing for mysterious reasons. See
golang.org/issue/37791 for more information.
Next CL triggered one of such bug (a label was not being
recognized), so prepare for it by converting to CRLF.
This CL also touches all existing batch files to force git
to update the line endings (unfortunately, changing
.gitattributes only has effect next time the file is checked
out or modified).
Fixes#37791
Updates #9281
Change-Id: I6f9a114351cb7ac9881914400aa210c930eb8cc1
Reviewed-on: https://go-review.googlesource.com/c/go/+/96495
Run-TryBot: Giovanni Bajo <rasky@develer.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
It appears that PowerRegisterSuspendResumeNotification is not supported
when running inside Docker - see issues #35447, #36557 and #37149.
Our current code relies on error number to determine Docker environment.
But we already saw PowerRegisterSuspendResumeNotification return
ERROR_FILE_NOT_FOUND, ERROR_INVALID_PARAMETERS and ERROR_ACCESS_DENIED
(see issues above). So this approach is not sustainable.
Just ignore PowerRegisterSuspendResumeNotification returned error.
Fixes#37149
Change-Id: I2beba9d45cdb8c1efac5e974e747827a6261915a
Reviewed-on: https://go-review.googlesource.com/c/go/+/219657
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Because of the index, these ops can't guarantee faulting if arg0 is nil.
Clean up the PPC64 index ops - they can't take a sym or an offset.
Noticed while debugging #37881. I don't think it is the cause, but I guess
there is a chance.
Update #37881
Change-Id: Ic22925250bf7b1ba64e3cea1a65638bc4bab390c
Reviewed-on: https://go-review.googlesource.com/c/go/+/224457
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Document that the Float.Sqrt method does not set the receiver's
Accuracy field.
Updates #37915
Change-Id: Ief1dcac07eacc0ef02f86bfac9044501477bca1c
Reviewed-on: https://go-review.googlesource.com/c/go/+/224497
Reviewed-by: Robert Griesemer <gri@golang.org>
There are a handful of places where the runtime wants to round up the
result of a division. We just introduced a helper to do this. This CL
replaces all of the hand-coded round-ups (that I could find) with this
helper.
Change-Id: I465d152157ff0f3cad40c0aa57491e4f2de510ad
Reviewed-on: https://go-review.googlesource.com/c/go/+/224385
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
materializeGCProg allocates a temporary buffer for unrolling a GC
program. Unfortunately, when computing the size of the buffer, it
rounds *down* the number of bytes needed to store bitmap before
rounding up the number of pages needed to store those bytes. The fact
that it rounds up to pages usually mitigates the rounding down, but
the type from #37470 exists right on the boundary where this doesn't
work:
type Sequencer struct {
htable [1 << 17]uint32
buf []byte
}
On 64-bit, this GC bitmap is exactly 8 KiB of zeros, followed by three
one bits. Hence, this needs 8193 bytes of storage, but the current
math in materializeGCProg rounds *down* the three one bits to 8192
bytes. Since this is exactly pageSize, the next step of rounding up to
the page size doesn't mitigate this error, and materializeGCProg
allocates a buffer that is one byte too small. runGCProg then writes
one byte past the end of this buffer, causing either a segfault (if
you're lucky!) or memory corruption.
Fixes#37470.
Change-Id: Iad24c463c501cd9b1dc1924bc2ad007991a094a0
Reviewed-on: https://go-review.googlesource.com/c/go/+/221197
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Trace output showing how dummy GOROOT was being set up was incorrect
(sense of the "cp -r" trace messages was inverted). This patch fixes
the problem.
Change-Id: Ib0ee649e305bfa1bc0c49e0d5ba2ea31e0a4f67e
Reviewed-on: https://go-review.googlesource.com/c/go/+/224377
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Add a test to ensure that the race detector sees that closing a
channel synchronizes with a read from that channel.
This test case failed when CL 181543 was in the tree.
CL 181543 was reverted in CL 216158; this adds a test to make
sure that we don't re-introduce the problem at a later date.
For #32529
For #36714
Change-Id: I5a40f744c67c3f8191d6ad822710c180880a7375
Reviewed-on: https://go-review.googlesource.com/c/go/+/216099
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
