Breaks closure test when GOMAXPROCS=2 or more.
««« original CL description
runtime: restore deadlock detection in the simplest case.
Fixes#3342.
R=iant, r, dave, rsc
CC=golang-dev, remy
https://golang.org/cl/5844051
»»»
R=rsc
CC=golang-dev
https://golang.org/cl/5924045
There was a small window during program initialization
where a signal could come in before the handling mechanisms
were set up to handle it. Delay the signal-handler installation
until we're ready for the signals.
Fixes#3314.
R=golang-dev, dsymonds, mikioh.mikioh
CC=golang-dev
https://golang.org/cl/5833049
Work around profiling kernel bug with signal masks.
Still broken on 64-bit Snow Leopard kernel,
but I think we can ignore that one and let people
upgrade to Lion.
Add new trivial tools addr2line and objdump to take
the place of the GNU tools of the same name, since
those are not installed on OS X.
Adapt pprof to invoke 'go tool addr2line' and
'go tool objdump' if the system tools do not exist.
Clean up disassembly of base register on amd64.
Fixes#2008.
R=golang-dev, bradfitz, mikioh.mikioh, r, iant
CC=golang-dev
https://golang.org/cl/5697066
morebuf holds a pc/sp from the last stack split or
reflect.call or panic/recover. If the pc is a closure,
the reference will keep it from being collected.
moreargp holds a pointer to the arguments from the
last stack split or reflect.call or panic/recover.
Normally it is a stack pointer and thus not of interest,
but in the case of reflect.call it is an allocated argument
list and holds up the arguments to the call.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/5674109
The m->cret word holds the C return value when returning
across a stack split boundary. It was not being cleared after
use, which means that the return value (if a C function)
or else the value of AX/R0 at the time of the last stack unsplit
was being kept alive longer than necessary. Clear it.
I think the effect here should be very small, but worth fixing
anyway.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/5677092
Periodically browse MHeap's freelists for long unused spans and release them if any.
Current hardcoded settings:
- GC is forced if none occured over the last 2 minutes.
- spans are handed back after 5 minutes of uselessness.
SysUnused (for Unix) is a wrapper on madvise MADV_DONTNEED on Linux and MADV_FREE on BSDs.
R=rsc, dvyukov, remyoudompheng
CC=golang-dev
https://golang.org/cl/5451057
It is possible that Linux and Windows copy the FP control word
from the parent thread when creating a new thread. Empirically,
Darwin does not. Reset the FP control world in all cases.
Enable the floating-point strconv test.
Fixes#2917 (again).
R=golang-dev, r, iant
CC=golang-dev
https://golang.org/cl/5660047
Same idea as heap profile: how did each thread get created?
Low memory (256 bytes per OS thread), high reward for
programs that suddenly have many threads running.
Fixes#1477.
R=golang-dev, r, dvyukov
CC=golang-dev
https://golang.org/cl/5639059
This patch adds a function to get the current cpu ticks. This is
deemed to be 'sufficiently random' to use to seed fastrand to mitigate
the algorithmic complexity attacks on the hash table implementation.
On AMD64 we use the RDTSC instruction. For 386, this instruction,
while valid, is not recognized by 8a so I've inserted the opcode by
hand. For ARM, this routine is currently stubbed to return a constant
0 value.
Future work: update 8a to recognize RDTSC.
Fixes#2630.
R=rsc
CC=golang-dev
https://golang.org/cl/5606048
Collapse the arch,os-specific directories into the main directory
by renaming xxx/foo.c to foo_xxx.c, and so on.
There are no substantial edits here, except to the Makefile.
The assumption is that the Go tool will #define GOOS_darwin
and GOARCH_amd64 and will make any file named something
like signals_darwin.h available as signals_GOOS.h during the
build. This replaces what used to be done with -I$(GOOS).
There is still work to be done to make runtime build with
standard tools, but this is a big step. After this we will have
to write a script to generate all the generated files so they
can be checked in (instead of generated during the build).
R=r, iant, r, lucio.dere
CC=golang-dev
https://golang.org/cl/5490053
The environment is needed by package time, which
we want not to depend on os (so that os can use
time.Time), so push down into syscall.
Delete syscall.Sleep, now unnecessary.
The package os environment API is preserved;
it is only the implementation that is moving to syscall.
Delete os.Envs, which was undocumented,
uninitialized on Windows and Plan 9, and
not maintained by Setenv and Clearenv.
Code can call os.Environ instead.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/5370091
This looks like it is just moving some code from
time to runtime (and translating it to C), but the
runtime can do a better job managing the goroutines,
and it needs this functionality for its own maintenance
(for example, for the garbage collector to hand back
unused memory to the OS on a time delay).
Might as well have just one copy of the timer logic,
and runtime can't depend on time, so vice versa.
It also unifies Sleep, NewTicker, and NewTimer behind
one mechanism, so that there are no claims that one
is more efficient than another. (For example, today
people recommend using time.After instead of time.Sleep
to avoid blocking an OS thread.)
Fixes#1644.
Fixes#1731.
Fixes#2190.
R=golang-dev, r, hectorchu, iant, iant, jsing, alex.brainman, dvyukov
CC=golang-dev
https://golang.org/cl/5334051
We only guarantee that the main goroutine runs on the
main OS thread for initialization. Programs that wish to
preserve that property for main.main can call runtime.LockOSThread.
This is what programs used to do before we unleashed
goroutines during init, so it is both a simple fix and keeps
existing programs working.
R=iant, r, dave, dvyukov
CC=golang-dev
https://golang.org/cl/5309070
Fixes#2337.
Unfortunate sequence of events is:
1. maxcpu=2, mcpu=1, grunning=1
2. starttheworld creates an extra M:
maxcpu=2, mcpu=2, grunning=1
4. the goroutine calls runtime.GOMAXPROCS(1)
maxcpu=1, mcpu=2, grunning=1
5. since it sees mcpu>maxcpu, it calls gosched()
6. schedule() deschedules the goroutine:
maxcpu=1, mcpu=1, grunning=0
7. schedule() call getnextandunlock() which
fails to pick up the goroutine again,
because canaddcpu() fails, because mcpu==maxcpu
8. then it sees that grunning==0,
reports deadlock and terminates
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/5191044
Running test/garbage/parser.out.
On a 4-core Lenovo X201s (Linux):
31.12u 0.60s 31.74r 1 cpu, no atomics
32.27u 0.58s 32.86r 1 cpu, atomic instructions
33.04u 0.83s 27.47r 2 cpu
On a 16-core Xeon (Linux):
33.08u 0.65s 33.80r 1 cpu, no atomics
34.87u 1.12s 29.60r 2 cpu
36.00u 1.87s 28.43r 3 cpu
36.46u 2.34s 27.10r 4 cpu
38.28u 3.85s 26.92r 5 cpu
37.72u 5.25s 26.73r 6 cpu
39.63u 7.11s 26.95r 7 cpu
39.67u 8.10s 26.68r 8 cpu
On a 2-core MacBook Pro Core 2 Duo 2.26 (circa 2009, MacBookPro5,5):
39.43u 1.45s 41.27r 1 cpu, no atomics
43.98u 2.95s 38.69r 2 cpu
On a 2-core Mac Mini Core 2 Duo 1.83 (circa 2008; Macmini2,1):
48.81u 2.12s 51.76r 1 cpu, no atomics
57.15u 4.72s 51.54r 2 cpu
The handoff algorithm is really only good for two cores.
Beyond that we will need to so something more sophisticated,
like have each core hand off to the next one, around a circle.
Even so, the code is a good checkpoint; for now we'll limit the
number of gc procs to at most 2.
R=dvyukov
CC=golang-dev
https://golang.org/cl/4641082
Make the stack traces more readable for new
Go programmers while preserving their utility for old hands.
- Change status number [4] to string.
- Elide frames in runtime package (internal details).
- Swap file:line and arguments.
- Drop 'created by' for main goroutine.
- Show goroutines in order of allocation:
implies main goroutine first if nothing else.
There is no option to get the extra frames back.
Uncomment 'return 1' at the bottom of symtab.c.
$ 6.out
throw: all goroutines are asleep - deadlock!
goroutine 1 [chan send]:
main.main()
/Users/rsc/g/go/src/pkg/runtime/x.go:22 +0x8a
goroutine 2 [select (no cases)]:
main.sel()
/Users/rsc/g/go/src/pkg/runtime/x.go:11 +0x18
created by main.main
/Users/rsc/g/go/src/pkg/runtime/x.go:19 +0x23
goroutine 3 [chan receive]:
main.recv(0xf8400010a0, 0x0)
/Users/rsc/g/go/src/pkg/runtime/x.go:15 +0x2e
created by main.main
/Users/rsc/g/go/src/pkg/runtime/x.go:20 +0x50
goroutine 4 [chan receive (nil chan)]:
main.recv(0x0, 0x0)
/Users/rsc/g/go/src/pkg/runtime/x.go:15 +0x2e
created by main.main
/Users/rsc/g/go/src/pkg/runtime/x.go:21 +0x66
$
$ 6.out index
panic: runtime error: index out of range
goroutine 1 [running]:
main.main()
/Users/rsc/g/go/src/pkg/runtime/x.go:25 +0xb9
$
$ 6.out nil
panic: runtime error: invalid memory address or nil pointer dereference
[signal 0xb code=0x1 addr=0x0 pc=0x22ca]
goroutine 1 [running]:
main.main()
/Users/rsc/g/go/src/pkg/runtime/x.go:28 +0x211
$
$ 6.out panic
panic: panic
goroutine 1 [running]:
main.main()
/Users/rsc/g/go/src/pkg/runtime/x.go:30 +0x101
$
R=golang-dev, qyzhai, n13m3y3r, r
CC=golang-dev
https://golang.org/cl/4907048
Allocate Defer on stack during cgo calls, as suggested
by dvyukov. Also includes some comment corrections.
benchmark old,ns/op new,ns/op
BenchmarkCgoCall 669 330
(Intel Xeon CPU 1.80GHz * 4, Linux 386)
R=dvyukov, rsc
CC=golang-dev
https://golang.org/cl/4910041
The corruption can occur when GOMAXPROCS
is changed from >1 to 1, since GOMAXPROCS=1
does not imply there is only 1 goroutine running,
other goroutines can still be not parked after
the change.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/4873050
Replace cas with xadd in scheduler.
Suggested by Dmitriy in last code review.
Verified with Promela model.
When there's actual contention for the atomic word,
this avoids the looping that compare-and-swap requires.
benchmark old ns/op new ns/op delta
runtime_test.BenchmarkSyscall 32 26 -17.08%
runtime_test.BenchmarkSyscall-2 155 59 -61.81%
runtime_test.BenchmarkSyscall-3 112 52 -52.95%
runtime_test.BenchmarkSyscall-4 94 48 -48.57%
runtime_test.BenchmarkSyscallWork 871 872 +0.11%
runtime_test.BenchmarkSyscallWork-2 481 477 -0.83%
runtime_test.BenchmarkSyscallWork-3 338 335 -0.89%
runtime_test.BenchmarkSyscallWork-4 263 256 -2.66%
R=golang-dev, iant
CC=golang-dev
https://golang.org/cl/4800047
Used to use mcpu+msyscall but that's
problematic for packing into a single
atomic word. The running goroutine count
(where running == Go code or syscall)
can be maintained separately, always
manipulated under lock.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/4767041
runtime.goidgen can be quite frequently modified and
shares cache line with the following variables,
it leads to false sharing.
50c6b0 b nfname
50c6b4 b nfunc
50c6b8 b nfunc$17
50c6bc b nhist$17
50c6c0 B runtime.checking
50c6c4 B runtime.gcwaiting
50c6c8 B runtime.goidgen
50c6cc B runtime.gomaxprocs
50c6d0 B runtime.panicking
50c6d4 B strconv.IntSize
50c6d8 B src/pkg/runtime/_xtest_.ss
50c6e0 B src/pkg/runtime/_xtest_.stop
50c6e8 b addrfree
50c6f0 b addrmem
50c6f8 b argv
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/4673054
The g->sched.sp saved stack pointer and the
g->stackbase and g->stackguard stack bounds
can change even while "the world is stopped",
because a goroutine has to call functions (and
therefore might split its stack) when exiting a
system call to check whether the world is stopped
(and if so, wait until the world continues).
That means the garbage collector cannot access
those values safely (without a race) for goroutines
executing system calls. Instead, save a consistent
triple in g->gcsp, g->gcstack, g->gcguard during
entersyscall and have the garbage collector refer
to those.
The old code was occasionally seeing (because of
the race) an sp and stk that did not correspond to
each other, so that stk - sp was not the number of
stack bytes following sp. In that case, if sp < stk
then the call scanblock(sp, stk - sp) scanned too
many bytes (anything between the two pointers,
which pointed into different allocation blocks).
If sp > stk then stk - sp wrapped around.
On 32-bit, stk - sp is a uintptr (uint32) converted
to int64 in the call to scanblock, so a large (~4G)
but positive number. Scanblock would try to scan
that many bytes and eventually fault accessing
unmapped memory. On 64-bit, stk - sp is a uintptr (uint64)
promoted to int64 in the call to scanblock, so a negative
number. Scanblock would not scan anything, possibly
causing in-use blocks to be freed.
In short, 32-bit platforms would have seen either
ineffective garbage collection or crashes during garbage
collection, while 64-bit platforms would have seen
either ineffective or incorrect garbage collection.
You can see the invalid arguments to scanblock in the
stack traces in issue 1620.
Fixes#1620.
Fixes#1746.
R=iant, r
CC=golang-dev
https://golang.org/cl/4437075
* Change use of m->g0 stack (aka scheduler stack).
* Provide runtime.mcall(f) to invoke f() on m->g0 stack.
* Replace scheduler loop entry with runtime.mcall(schedule).
Runtime.mcall eliminates the need for fake scheduler states that
exist just to run a bit of code on the m->g0 stack
(Grecovery, Gstackalloc).
The elimination of the scheduler as a loop that stops and
starts using gosave and gogo fixes a bad interaction with the
way cgo uses the m->g0 stack. Cgo runs external (gcc-compiled)
C functions on that stack, and then when calling back into Go,
it sets m->g0->sched.sp below the added call frames, so that
other uses of m->g0's stack will not interfere with those frames.
Unfortunately, gogo (longjmp) back to the scheduler loop at
this point would end up running scheduler with the lower
sp, which no longer points at a valid stack frame for
a call to scheduler. If scheduler then wrote any function call
arguments or local variables to where it expected the stack
frame to be, it would overwrite other data on the stack.
I realized this possibility while debugging a problem with
calling complex Go code in a Go -> C -> Go cgo callback.
This wasn't the bug I was looking for, it turns out, but I believe
it is a real bug nonetheless. Switching to runtime.mcall, which
only adds new frames to the stack and never jumps into
functions running in existing ones, fixes this bug.
* Move cgo-related code out of proc.c into cgocall.c.
* Add very large comment describing cgo call sequences.
* Simpilify, regularize cgo function implementations and names.
* Add test suite as misc/cgo/test.
Now the Go -> C path calls cgocall, which calls asmcgocall,
and the C -> Go path calls cgocallback, which calls cgocallbackg.
The shuffling, which affects mainly the callback case, moves
most of the callback implementation to cgocallback running
on the m->curg stack (not the m->g0 scheduler stack) and
only while accounted for with $GOMAXPROCS (between calls
to exitsyscall and entersyscall).
The previous callback code did not block in startcgocallback's
approximation to exitsyscall, so if, say, the garbage collector
were running, it would still barge in and start doing things
like call malloc. Similarly endcgocallback's approximation of
entersyscall did not call matchmg to kick off new OS threads
when necessary, which caused the bug in issue 1560.
Fixes#1560.
R=iant
CC=golang-dev
https://golang.org/cl/4253054
This functionality might be used in environments
where programs are limited to a single thread,
to simulate a select-driven network server. It is
not exposed via the standard runtime API.
R=r, r2
CC=golang-dev
https://golang.org/cl/4254041
Avoids deadlocks like the one below, in which a stack split happened
in order to call lock(&stacks), but then the stack unsplit cannot run
because stacks is now locked.
The only code calling stackalloc that wasn't on a scheduler
stack already was malg, which creates a new goroutine.
runtime.futex+0x23 /home/rsc/g/go/src/pkg/runtime/linux/amd64/sys.s:139
runtime.futex()
futexsleep+0x50 /home/rsc/g/go/src/pkg/runtime/linux/thread.c:51
futexsleep(0x5b0188, 0x300000003, 0x100020000, 0x4159e2)
futexlock+0x85 /home/rsc/g/go/src/pkg/runtime/linux/thread.c:119
futexlock(0x5b0188, 0x5b0188)
runtime.lock+0x56 /home/rsc/g/go/src/pkg/runtime/linux/thread.c:158
runtime.lock(0x5b0188, 0x7f0d27b4a000)
runtime.stackfree+0x4d /home/rsc/g/go/src/pkg/runtime/malloc.goc:336
runtime.stackfree(0x7f0d27b4a000, 0x1000, 0x8, 0x7fff37e1e218)
runtime.oldstack+0xa6 /home/rsc/g/go/src/pkg/runtime/proc.c:705
runtime.oldstack()
runtime.lessstack+0x22 /home/rsc/g/go/src/pkg/runtime/amd64/asm.s:224
runtime.lessstack()
----- lessstack called from goroutine 2 -----
runtime.lock+0x56 /home/rsc/g/go/src/pkg/runtime/linux/thread.c:158
runtime.lock(0x5b0188, 0x40a5e2)
runtime.stackalloc+0x55 /home/rsc/g/go/src/pkg/runtime/malloc.c:316
runtime.stackalloc(0x1000, 0x4055b0)
runtime.malg+0x3d /home/rsc/g/go/src/pkg/runtime/proc.c:803
runtime.malg(0x1000, 0x40add9)
runtime.newproc1+0x12b /home/rsc/g/go/src/pkg/runtime/proc.c:854
runtime.newproc1(0xf840027440, 0x7f0d27b49230, 0x0, 0x49f238, 0x40, ...)
runtime.newproc+0x2f /home/rsc/g/go/src/pkg/runtime/proc.c:831
runtime.newproc(0x0, 0xf840027440, 0xf800000010, 0x44b059)
...
R=r, r2
CC=golang-dev
https://golang.org/cl/4216045
Fix problems found.
On amd64, various library routines had bigger
stack frames than expected, because large function
calls had been added.
runtime.assertI2T: nosplit stack overflow
120 assumed on entry to runtime.assertI2T
8 after runtime.assertI2T uses 112
0 on entry to runtime.newTypeAssertionError
-8 on entry to runtime.morestack01
runtime.assertE2E: nosplit stack overflow
120 assumed on entry to runtime.assertE2E
16 after runtime.assertE2E uses 104
8 on entry to runtime.panic
0 on entry to runtime.morestack16
-8 after runtime.morestack16 uses 8
runtime.assertE2T: nosplit stack overflow
120 assumed on entry to runtime.assertE2T
16 after runtime.assertE2T uses 104
8 on entry to runtime.panic
0 on entry to runtime.morestack16
-8 after runtime.morestack16 uses 8
runtime.newselect: nosplit stack overflow
120 assumed on entry to runtime.newselect
56 after runtime.newselect uses 64
48 on entry to runtime.printf
8 after runtime.printf uses 40
0 on entry to vprintf
-8 on entry to runtime.morestack16
runtime.selectdefault: nosplit stack overflow
120 assumed on entry to runtime.selectdefault
56 after runtime.selectdefault uses 64
48 on entry to runtime.printf
8 after runtime.printf uses 40
0 on entry to vprintf
-8 on entry to runtime.morestack16
runtime.selectgo: nosplit stack overflow
120 assumed on entry to runtime.selectgo
0 after runtime.selectgo uses 120
-8 on entry to runtime.gosched
On arm, 5c was tagging functions NOSPLIT that should
not have been, like the recursive function printpanics:
printpanics: nosplit stack overflow
124 assumed on entry to printpanics
112 after printpanics uses 12
108 on entry to printpanics
96 after printpanics uses 12
92 on entry to printpanics
80 after printpanics uses 12
76 on entry to printpanics
64 after printpanics uses 12
60 on entry to printpanics
48 after printpanics uses 12
44 on entry to printpanics
32 after printpanics uses 12
28 on entry to printpanics
16 after printpanics uses 12
12 on entry to printpanics
0 after printpanics uses 12
-4 on entry to printpanics
R=r, r2
CC=golang-dev
https://golang.org/cl/4188061
Follow morestack, so that crashes during a stack split
give complete traces. Also mark stack segment boundaries
as an aid to debugging.
Correct various line number bugs with yet another attempt
at interpreting the pc/ln table. This one has a chance at
being correct, because I based it on reading src/cmd/ld/lib.c
instead of on reading the documentation.
Fixes#1138.
Fixes#1430.
Fixes#1461.
throw: runtime: split stack overflow
runtime.throw+0x3e /home/rsc/g/go2/src/pkg/runtime/runtime.c:78
runtime.throw(0x81880af, 0xf75c8b18)
runtime.newstack+0xad /home/rsc/g/go2/src/pkg/runtime/proc.c:728
runtime.newstack()
runtime.morestack+0x4f /home/rsc/g/go2/src/pkg/runtime/386/asm.s:184
runtime.morestack()
----- morestack called from stack: -----
runtime.new+0x1a /home/rsc/g/go2/src/pkg/runtime/malloc.c:288
runtime.new(0x1, 0x0, 0x0)
gongo.makeBoard+0x33 /tmp/Gongo/gongo_robot_test.go:344
gongo.makeBoard(0x809d238, 0x1, 0xf76092c8, 0x1)
----- stack segment boundary -----
gongo.checkEasyScore+0xcc /tmp/Gongo/gongo_robot_test.go:287
gongo.checkEasyScore(0xf764b710, 0x0, 0x809d238, 0x1)
gongo.TestEasyScore+0x8c /tmp/Gongo/gongo_robot_test.go:255
gongo.TestEasyScore(0xf764b710, 0x818a990)
testing.tRunner+0x2f /home/rsc/g/go2/src/pkg/testing/testing.go:132
testing.tRunner(0xf764b710, 0xf763b5dc, 0x0)
runtime.goexit /home/rsc/g/go2/src/pkg/runtime/proc.c:149
runtime.goexit()
R=ken2, r
CC=golang-dev
https://golang.org/cl/4000053
Shame on me: I fixed the same bug in 6l in 8691fcc6a66e
(https://golang.org/cl/2609041) and neglected
to look at 5l and 8l to see if they were affected.
On the positive side, the check I added in that CL is the
one that detected this bug.
Fixes#1457.
R=ken2
CC=golang-dev
https://golang.org/cl/3981052
The old heap maps used a multilevel table, but that
was overkill: there are only 1M entries on a 32-bit
machine and we can arrange to use a dense address
range on a 64-bit machine.
The heap map is in bss. The assumption is that if
we don't touch the pages they won't be mapped in.
Also moved some duplicated memory allocation
code out of the OS-specific files.
R=r
CC=golang-dev
https://golang.org/cl/4118042
The fault was lucky: when it wasn't faulting it was silently
copying a word from some other block and later putting
that same word back. If some other goroutine had changed
that word of memory in the interim, too bad.
The ARM code was inconsistent about whether the
"argument frame" included the saved LR. Including it made
some things more regular but mostly just caused confusion
in the places where the regularity broke. Now the rule
reflects reality: argp is always a pointer to arguments,
never a saved link register.
Renamed struct fields to make meaning clearer.
Running ARM in QEMU, package time's gotest:
* before: 27/58 failed
* after: 0/50
R=r, r2
CC=golang-dev
https://golang.org/cl/3993041
I missed that environment is used during runtime setup,
well before go init() functions run. Implemented os-dependent
runtime.goenvs functions to allow for different unix, plan9 and
windows versions of environment discovery.
R=rsc, paulzhol
CC=golang-dev
https://golang.org/cl/3787046
If we don't do this, then when C code calls back to Go code
which panics, we lose space on the scheduler stack. If that
happens a lot, eventually there is no space left on the
scheduler stack.
R=rsc
CC=golang-dev
https://golang.org/cl/3898042
Formerly known as libcgo.
Almost no code here is changing; the diffs
are shown relative to the originals in libcgo.
R=r
CC=golang-dev
https://golang.org/cl/3420043
Prefix all external symbols in runtime by runtime·,
to avoid conflicts with possible symbols of the same
name in linked-in C libraries. The obvious conflicts
are printf, malloc, and free, but hide everything to
avoid future pain.
The symbols left alone are:
** known to cgo **
_cgo_free
_cgo_malloc
libcgo_thread_start
initcgo
ncgocall
** known to linker **
_rt0_$GOARCH
_rt0_$GOARCH_$GOOS
text
etext
data
end
pclntab
epclntab
symtab
esymtab
** known to C compiler **
_divv
_modv
_div64by32
etc (arch specific)
Tested on darwin/386, darwin/amd64, linux/386, linux/amd64.
Built (but not tested) for freebsd/386, freebsd/amd64, linux/arm, windows/386.
R=r, PeterGo
CC=golang-dev
https://golang.org/cl/2899041
The frame that gets allocated is for both
the args and the autos. If together they
exceed the default frame size, we need to
tell morestack about both so that it allocates
a large enough frame.
Sanity check stack pointer in morestack
to catch similar bugs.
R=ken2
CC=golang-dev
https://golang.org/cl/2609041
This permits cgo callbacks to work when run in init code.
Otherwise cgocallback switches to the wrong stack address.
R=rsc
CC=golang-dev
https://golang.org/cl/1123043
These functions are used to call from a C function back to a
Go function. This only includes 386 support.
R=rsc
CC=golang-dev
https://golang.org/cl/834045
1. Fix bug in GOMAXPROCS when trying to cut number of procs
Race could happen on any system but was
manifesting only on Xen hosted Linux.
2. Fix recover on ARM, where FP != caller SP.
R=r
CC=golang-dev
https://golang.org/cl/880043
* correct symbol table size
* do not reorder functions in output
* traceback
* signal handling
* use same code for go + defer
* handle leaf functions in symbol table
R=kaib, dpx
CC=golang-dev
https://golang.org/cl/884041