Each $GOPATH entry may have a file $GOPATH/src/.goimportsignore which
may contain blank lines, #comment lines, or lines naming a directory
relative to the configuration file to ignore when scanning. No
globbing or regex patterns are allowed.
Updates golang/go#16367 (goimports speed)
Fixesgolang/go#16386 (add mechanism to ignore directories)
Change-Id: I8f1a88ae6c4d0ed3075444d70aec3e2228c5ce6a
Reviewed-on: https://go-review.googlesource.com/24971
Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When goimports was run on a file like:
package main
import (
"example.net/foo"
"example.net/bar"
)
var _, _ = foo.Foo, bar.Bar
... even though there looks to be no work to do, it still needs to
verify that "example.net/foo" is really package "foo" (even though it
looks like it) and "example.net/bar" is really package
"bar". (Packages in the standard library are hard-coded since the
previous commit and not verified for consistency since they're always consistent)
To do that verification for non-std packages, go/build.Import was
being used before, but Import reads all files in the directory to make
sure they're consistent. That's unnecessary. Instead, stop after the
first file. If example.net/foo has foo.go with "package foo" and
just_kidding.go with "package other", we never read that far to find
the inconsistency. Oh well. Prefer speed.
Updates golang/go#16367
Change-Id: I9fc3fefbee0e8a6bc287bf2a565257fb9523fd5c
Reviewed-on: https://go-review.googlesource.com/24948
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
I was going to add a hook to enable go-guru-hl-identifier-mode
as a side effect of go-mode, but a person I consulted said that
was bad form; instead I merely documented it.
Change-Id: I48b00b71c7ba485b3d632211923509a74281acbe
Reviewed-on: https://go-review.googlesource.com/24834
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
In the package, the added import declarations used backslashes.
In the test, filenames in warning messages used backslashes.
Now both use forward slash.
Fixesgolang/go#16384
Change-Id: I43116aab0b3209305f23ed9def7c4adf3259941e
Reviewed-on: https://go-review.googlesource.com/24943
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
I felt the burn of my laptop on my legs, spinning away while processing
goimports, and felt that it was time to make goimports great again.
Over the past few years goimports fell into a slow state of disrepair
with too many feature additions and no attention to the performance
death by a thousand cuts. This was particularly terrible on OS X with
its lackluster filesystem buffering.
This CL makes goimports stronger, together with various optimizations
and more visibility into what goimports is doing.
* adds more internal documentation
* avoids scanning $GOPATH for answers when running goimports on a file
under $GOROOT (for Go core hackers)
* don't read all $GOROOT & $GOPATH directories' Go code looking for
their package names until much later. Require the package name of
missing imports to be present in the last two directory path
components. Then only try importing them in order from best to
worst (shortest to longest, as before), so we can stop early.
* when adding imports, add names to imports when the imported package name
doesn't match the baes of its import path. For example:
import foo "example.net/foo/v1"
* don't read all *.go files in a package directory once the first file
in a directory has revealed itself to be a package we're not looking
for. For example, if we're looking for the right "client" for "client.Foo",
we used to consider a directory "bar/client" as a candidate and read
all 50 of its *.go files instead of stopping after its first *.go
file had a "package main" line.
* add some fast paths to remove allocations
* add some fast paths to remove disk I/O when looking up the base
package name of a standard library import (of existing imports in a
file, which are very common)
* adds a special case for import "C", to avoid some disk I/O.
* add a -verbose flag to goimports for debugging
On my Mac laptop with a huge $GOPATH, with a test file like:
package foo
import (
"fmt"
"net/http"
)
/*
*/
import "C"
var _ = cloudbilling.New
var _ = http.NewRequest
var _ = client.New
... this took like 10 seconds before, and now 1.3 seconds. (Still
slow; disk-based caching can come later)
Updates golang/go#16367 (goimports is slow)
Updates golang/go#16384 (refactor TestRename is broken on Windows)
Change-Id: I97e85d3016afc9f2ad5501f97babad30c7989183
Reviewed-on: https://go-review.googlesource.com/24941
Reviewed-by: Andrew Gerrand <adg@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
There is no need to check for import conflicts when the package name
doesn't change. Add test.
Also, when reporting a (non-spurious) import conflict, make clear that
the error is just a warning. Add a test for same.
Change-Id: Idde0483b502cd041fd893230fec06b8533f54f3c
Reviewed-on: https://go-review.googlesource.com/24917
Reviewed-by: Michael Matloob <matloob@golang.org>
In Go 1.7, math/rand.Read was added. Previously, the only package
containing "rand.Read" was "crypto/rand".
goimports was updated to know that, and zstdlib.go contains a note
that it's ambiguous:
"rand.Perm": "math/rand",
"rand.Prime": "crypto/rand",
"rand.Rand": "math/rand",
// "rand.Read" is ambiguous
"rand.Reader": "crypto/rand",
"rand.Seed": "math/rand",
"rand.Source": "math/rand",
The intention originally was that such ambiguous things would
never be resolved, even randomly.
But a later change added support for build.Default.SrcDirs, which
meant GOROOT was also searched for ambiguous things. Or maybe I forget
the history.
In any case, when goimports tried to resolve "rand.Read", the
findImportStdlib check was returning nothing, which lead to the
$GOROOT being searched, where math/rand was picked by chance. That's a
dangerous default when the intentional might've been crypto/rand.
Special case it and prefer crypto/rand if there's no more specific
clue either way.
Change-Id: Ib5f8f297f72fa309d5ca9b15a37493df2e17567c
Reviewed-on: https://go-review.googlesource.com/24847
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
combine-and-quote-strings is buggy. The value of this expression:
(split-string-and-unquote (combine-and-quote-strings '("a" "" "b")))
is ("a" "b"). Consequently, if go-guru-scope is "", the following
"-tags" flag is interpreted as the scope.
Change-Id: I2955ffa2b95914e01d44b52690e810f816076d5c
Reviewed-on: https://go-review.googlesource.com/24746
Reviewed-by: Dominik Honnef <dominik@honnef.co>
Reviewed-by: Alan Donovan <adonovan@google.com>
This comment was written and has not been changed since this package was
created: https://www.youtube.com/watch?v=1rZ-JorHJEY
It is no longer called 'tipgodoc', and it is no longer all that 'new'. This
change request updates that text to reflect the current state of the 'tip'
command.
Change-Id: I4ce56fb9a3bd617cf92f8d53df5a2d4726085a9a
Reviewed-on: https://go-review.googlesource.com/24860
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Only unary CallExprs with no ellipsis, f(x), are ambiguous.
Change-Id: If4f17445ab0725dee916992db133eac5536133a7
Reviewed-on: https://go-review.googlesource.com/24552
Reviewed-by: Robert Griesemer <gri@golang.org>
When building the corpus of local packages, a "too many open files"
error would cause some directories inside GOPATH to be skipped.
Further, the error would not be reported because it was masked by a
"file not found" error from the GOROOT VFS layer.
This change adds a rate limit around parsing files when buildling
the directory tree, error reporting when godoc is run with -v, and
fixes the masked error issue in the vfs package.
It's possible that the rate limiting could be put into the
godoc/vfs/gatefs package, but I tried making the gate account for
open files (not just individual open/close/read/write operations)
but then godoc just hard locks (it wasn't designed to only open 20
files at once).
Change-Id: I925d120b53d9a86430b6977cb90eb143785ecc48
Reviewed-on: https://go-review.googlesource.com/24060
Reviewed-by: Dave Day <djd@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The go tool will import a package with a import path that traverses
symlinks with no problems, but goimports would remove that import
because it would fail to recognize the package as existent.
Fixesgolang/go#14845
Note: if the file you are currently processing also has a name inside
the symlink, you might have to use the "long" path for vendoring to
work, as it wouldn't be recognized as "deeper" than the vendor folder
otherwise. For example in this tree:
.
├── myfile.go
└── x
├── vendor
│ └── mypkg
│ └── foo.go
└── y -> ..
If myfile.go imports mypkg, you will have to process it as
./x/y/myfile.go, not ./myfile.go.
Change-Id: Ic8f41baed3f28d4e9b813160d91aef09ece1fc9f
Reviewed-on: https://go-review.googlesource.com/23803
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Andrew Gerrand <adg@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Go is being proposed as an officially supported language for elements of
OpenStack:
https://review.openstack.org/#/c/312267/
As such, repos that exist in OpenStack's git infrastructure
are likely to become places from which people might want to go get
things. Allow optional .git suffixes to allow writing code that
depends on git.openstack.org repos that will work with older go versions
while we wait for this support to roll out.
Change-Id: I1f7be6b7aae63f9c554dbcdbfa46855bcff321df
Reviewed-on: https://go-review.googlesource.com/23362
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Since CL 17728 goimports was using the file path to try finding packages
inside its /vendor directory. This CL builds upon this previous work to
also consider packages inside /vendor when converting an import path to
a package name.
Change-Id: I173472ac51e3f681d758ec52add60ffc04c62c1a
Reviewed-on: https://go-review.googlesource.com/22020
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
BImportData now requires a token.FileSet.
Column numbers are not exported, and are always reported as 1.
Line numbers greater than the limit (currently 64K) are reported as 1.
+ Test that file/line info is correctly preserved for the entire
standard library.
Change-Id: I80cf370685320240dfb262d36fafd6cdf8569bfb
Reviewed-on: https://go-review.googlesource.com/22788
Reviewed-by: Robert Griesemer <gri@golang.org>
Added anchor link beside each function, type and method definition in
godoc's generated HTML. Anchor links are only shown when the mouse is
hovering over the definition. The link body is the Unicode PILCROW SIGN
character (¶ HTML entity).
Fixes: golang/go#13748
Change-Id: I645269f6c229f76b2882899e1a7483577877ac30
Reviewed-on: https://go-review.googlesource.com/20246
Reviewed-by: Andrew Gerrand <adg@golang.org>
The baseURL is used to construct the target URLs for both /compile
and /share. When I changed it recently, I forgot about the latter case.
Change-Id: Icde617b1cc3d31d98ca4b62e313b9d886253f1cc
Reviewed-on: https://go-review.googlesource.com/22689
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
...now that gc's export data records fewer dependencies.
Change-Id: Ie0f68f1f7b0825f6d2c100dfe189be017383db60
Reviewed-on: https://go-review.googlesource.com/22584
Reviewed-by: Robert Griesemer <gri@golang.org>
Previously we were sorting only JSON objects, but we must do the same
for plain output too to avoid sporadic failures.
Tested 20 times.
Change-Id: Ic60363b720c2afc91b57864bc93e298f83e85b99
Reviewed-on: https://go-review.googlesource.com/22555
Reviewed-by: Robert Griesemer <gri@golang.org>
...which is used by $GOROOT/test/goprint.go.
Change-Id: I4626b8fae3f87d9c8dd8cdcd8c05036955a36262
Reviewed-on: https://go-review.googlesource.com/22560
Reviewed-by: Robert Griesemer <gri@golang.org>
For a 'definition' query on X in p.X, use special logic to load and
parse package p and find the declaration of package member X, without
using the type checker. Such queries now typically take under
10ms (faster than godef).
The logic assumes that import "something/p" defines the name p. If this
assumption is false, p.X could be a selection of a field or method X on
a member p of the same package, defined in another file.
So don't write code like that.
Added missing test of 'definitions'.
JSON tests now sanitize absolute $GOPATH filenames in the output.
Fixes issue #15458
Change-Id: I21e75fcc9372aaedd56851cace444aef205c7a97
Reviewed-on: https://go-review.googlesource.com/22526
Reviewed-by: Dominik Honnef <dominik@honnef.co>
Reviewed-by: Michael Matloob <matloob@golang.org>
...as the basis of the query, instead of reporting an error.
+ test
Change-Id: Ie5defa98cd8dfc8e200e296c2aa02c88893cf9ac
Reviewed-on: https://go-review.googlesource.com/22117
Reviewed-by: Michael Matloob <matloob@golang.org>
We define a derived mode of compilation-mode, so that various
names say "guru" instead of "compilation", and use the hooks it
provides to apply our postprocessing incrementally instead of
all at the end. It's much faster, and works nicely with the
new streaming referrers query.
Compilation mode requires a shell command, not an execve array,
so go-guru--compile-command joins the arguments with spaces.
go-guru--exec has been specialized for JSON mode,
and renamed to go-guru--json.
go-guru--set-scope-if-empty is now done by each mode, to avoid
the NEED-SCOPE parameter to go-guru--exec.
Change-Id: I692b8b28449b7cc17fd6251a152588f9d8b89ebc
Reviewed-on: https://go-review.googlesource.com/21772
Reviewed-by: Dominik Honnef <dominik@honnef.co>
Reviewed-by: Alan Donovan <adonovan@google.com>
This picks up a recent change to the playground package.
Change-Id: I9b5f0ef9981373274d707014a2c0e2786e9624c0
Reviewed-on: https://go-review.googlesource.com/22538
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Not sure why this was originally going via the playground. It needn't.
Change-Id: I40b5886a56ba4b941ff74f4bc325625412d7eaff
Reviewed-on: https://go-review.googlesource.com/22497
Reviewed-by: Andrew Gerrand <adg@golang.org>
Don't export position info for now. Enabled/disabled with a flag.
The importer recognizes the chosen format automatically.
Change-Id: I055818eb9dba50cc97f40eb92220258a1ddbfbec
Reviewed-on: https://go-review.googlesource.com/22427
Reviewed-by: Alan Donovan <adonovan@google.com>
