1. Some incorrect test cases are disabled.
2. Some wrong test cases are corrected.
3. Some new test cases are added.
Change-Id: Ib5d0473d55159f233ddab79f96967eaec7b08597
Reviewed-on: https://go-review.googlesource.com/113736
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This modifies issafepoint in liveness analysis to report almost every
operation as a safe point. There are four things we don't mark as
safe-points:
1. Runtime code (other than at calls).
2. go:nosplit functions (other than at calls).
3. Instructions between the load of the write barrier-enabled flag and
the write.
4. Instructions leading up to a uintptr -> unsafe.Pointer conversion.
We'll optimize this in later CLs:
name old time/op new time/op delta
Template 185ms ± 2% 190ms ± 2% +2.95% (p=0.000 n=10+10)
Unicode 96.3ms ± 3% 96.4ms ± 1% ~ (p=0.905 n=10+9)
GoTypes 658ms ± 0% 669ms ± 1% +1.72% (p=0.000 n=10+9)
Compiler 3.14s ± 1% 3.18s ± 1% +1.56% (p=0.000 n=9+10)
SSA 7.41s ± 2% 7.59s ± 1% +2.48% (p=0.000 n=9+10)
Flate 126ms ± 1% 128ms ± 1% +2.08% (p=0.000 n=10+10)
GoParser 153ms ± 1% 157ms ± 2% +2.38% (p=0.000 n=10+10)
Reflect 437ms ± 1% 442ms ± 1% +0.98% (p=0.001 n=10+10)
Tar 178ms ± 1% 179ms ± 1% +0.67% (p=0.035 n=10+9)
XML 223ms ± 1% 229ms ± 1% +2.58% (p=0.000 n=10+10)
[Geo mean] 394ms 401ms +1.75%
No effect on binary size because we're not yet emitting these extra
safe points.
For #24543.
Change-Id: I16a1eebb9183cad7cef9d53c0fd21a973cad6859
Reviewed-on: https://go-review.googlesource.com/109348
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Currently, range loops over slices and arrays are compiled roughly
like:
for i, x := range s { b }
⇓
for i, _n, _p := 0, len(s), &s[0]; i < _n; i, _p = i+1, _p + unsafe.Sizeof(s[0]) { b }
⇓
i, _n, _p := 0, len(s), &s[0]
goto cond
body:
{ b }
i, _p = i+1, _p + unsafe.Sizeof(s[0])
cond:
if i < _n { goto body } else { goto end }
end:
The problem with this lowering is that _p may temporarily point past
the end of the allocation the moment before the loop terminates. Right
now this isn't a problem because there's never a safe-point during
this brief moment.
We're about to introduce safe-points everywhere, so this bad pointer
is going to be a problem. We could mark the increment as an unsafe
block, but this inhibits reordering opportunities and could result in
infrequent safe-points if the body is short.
Instead, this CL fixes this by changing how we compile range loops to
never produce this past-the-end pointer. It changes the lowering to
roughly:
i, _n, _p := 0, len(s), &s[0]
if i < _n { goto body } else { goto end }
top:
_p += unsafe.Sizeof(s[0])
body:
{ b }
i++
if i < _n { goto top } else { goto end }
end:
Notably, the increment is split into two parts: we increment the index
before checking the condition, but increment the pointer only *after*
the condition check has succeeded.
The implementation builds on the OFORUNTIL construct that was
introduced during the loop preemption experiments, since OFORUNTIL
places the increment and condition after the loop body. To support the
extra "late increment" step, we further define OFORUNTIL's "List"
field to contain the late increment statements. This makes all of this
a relatively small change.
This depends on the improvements to the prove pass in CL 102603. With
the current lowering, bounds-check elimination knows that i < _n in
the body because the body block is dominated by the cond block. In the
new lowering, deriving this fact requires detecting that i < _n on
*both* paths into body and hence is true in body. CL 102603 made prove
able to detect this.
The code size effect of this is minimal. The cmd/go binary on
linux/amd64 increases by 0.17%. Performance-wise, this actually
appears to be a net win, though it's mostly noise:
name old time/op new time/op delta
BinaryTree17-12 2.80s ± 0% 2.61s ± 1% -6.88% (p=0.000 n=20+18)
Fannkuch11-12 2.41s ± 0% 2.42s ± 0% +0.05% (p=0.005 n=20+20)
FmtFprintfEmpty-12 41.6ns ± 5% 41.4ns ± 6% ~ (p=0.765 n=20+19)
FmtFprintfString-12 69.4ns ± 3% 69.3ns ± 1% ~ (p=0.084 n=19+17)
FmtFprintfInt-12 76.1ns ± 1% 77.3ns ± 1% +1.57% (p=0.000 n=19+19)
FmtFprintfIntInt-12 122ns ± 2% 123ns ± 3% +0.95% (p=0.015 n=20+20)
FmtFprintfPrefixedInt-12 153ns ± 2% 151ns ± 3% -1.27% (p=0.013 n=20+20)
FmtFprintfFloat-12 215ns ± 0% 216ns ± 0% +0.47% (p=0.000 n=20+16)
FmtManyArgs-12 486ns ± 1% 498ns ± 0% +2.40% (p=0.000 n=20+17)
GobDecode-12 6.43ms ± 0% 6.50ms ± 0% +1.08% (p=0.000 n=18+19)
GobEncode-12 5.43ms ± 1% 5.47ms ± 0% +0.76% (p=0.000 n=20+20)
Gzip-12 218ms ± 1% 218ms ± 1% ~ (p=0.883 n=20+20)
Gunzip-12 38.8ms ± 0% 38.9ms ± 0% ~ (p=0.644 n=19+19)
HTTPClientServer-12 76.2µs ± 1% 76.4µs ± 2% ~ (p=0.218 n=20+20)
JSONEncode-12 12.2ms ± 0% 12.3ms ± 1% +0.45% (p=0.000 n=19+19)
JSONDecode-12 54.2ms ± 1% 53.3ms ± 0% -1.67% (p=0.000 n=20+20)
Mandelbrot200-12 3.71ms ± 0% 3.71ms ± 0% ~ (p=0.143 n=19+20)
GoParse-12 3.22ms ± 0% 3.19ms ± 1% -0.72% (p=0.000 n=20+20)
RegexpMatchEasy0_32-12 76.7ns ± 1% 75.8ns ± 1% -1.19% (p=0.000 n=20+17)
RegexpMatchEasy0_1K-12 245ns ± 1% 243ns ± 0% -0.72% (p=0.000 n=18+17)
RegexpMatchEasy1_32-12 71.9ns ± 0% 71.7ns ± 1% -0.39% (p=0.006 n=12+18)
RegexpMatchEasy1_1K-12 358ns ± 1% 354ns ± 1% -1.13% (p=0.000 n=20+19)
RegexpMatchMedium_32-12 105ns ± 2% 105ns ± 1% -0.63% (p=0.007 n=19+20)
RegexpMatchMedium_1K-12 31.9µs ± 1% 31.9µs ± 1% ~ (p=1.000 n=17+17)
RegexpMatchHard_32-12 1.51µs ± 1% 1.52µs ± 2% +0.46% (p=0.042 n=18+18)
RegexpMatchHard_1K-12 45.3µs ± 1% 45.5µs ± 2% +0.44% (p=0.029 n=18+19)
Revcomp-12 388ms ± 1% 385ms ± 0% -0.57% (p=0.000 n=19+18)
Template-12 63.0ms ± 1% 63.3ms ± 0% +0.50% (p=0.000 n=19+20)
TimeParse-12 309ns ± 1% 307ns ± 0% -0.62% (p=0.000 n=20+20)
TimeFormat-12 328ns ± 0% 333ns ± 0% +1.35% (p=0.000 n=19+19)
[Geo mean] 47.0µs 46.9µs -0.20%
(https://perf.golang.org/search?q=upload:20180326.1)
For #10958.
For #24543.
Change-Id: Icbd52e711fdbe7938a1fea3e6baca1104b53ac3a
Reviewed-on: https://go-review.googlesource.com/102604
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Currently, we compile range loops into for loops with the obvious
initialization and update of the index variable. In this form, the
prove pass can see that the body is dominated by an i < len condition,
and findIndVar can detect that i is an induction variable and that
0 <= i < len.
GOEXPERIMENT=preemptibleloops compiles range loops to OFORUNTIL and
we're preparing to unconditionally switch to a variation of this for
#24543. OFORUNTIL moves the increment and condition *after* the body,
which makes the bounds on the index variable much less obvious. With
OFORUNTIL, proving anything about the index variable requires
understanding the phi that joins the index values at the top of the
loop body block.
This interferes with both prove's ability to see that i < len (this is
true on both paths that enter the body, but from two different
conditional checks) and with findIndVar's ability to detect the
induction pattern.
Fix this by teaching prove to detect that the index in the pattern
constructed by OFORUNTIL is an induction variable and add both bounds
to the facts table. Currently this is done separately from findIndVar
because it depends on prove's factsTable, while findIndVar runs before
visiting blocks and building the factsTable.
Without any GOEXPERIMENT, this has no effect on std or cmd. However,
with GOEXPERIMENT=preemptibleloops, this change becomes necessary to
prove 90 conditions in std and cmd.
Change-Id: Ic025d669f81b53426309da5a6e8010e5ccaf4f49
Reviewed-on: https://go-review.googlesource.com/102603
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This test measures "line churn" which was minimized to help
improve the debugger experience. With proper is_stmt markers,
this is no longer necessary, and it is more accurate (for
profiling) to allow line numbers to vary willy-nilly.
"Debugger experience" is now better measured by
cmd/compile/internal/ssa/debug_test.go
This CL made the obsoleting change:
https://go-review.googlesource.com/c/go/+/102435
Change-Id: I874ab89f3b243b905aaeba7836118f632225a667
Reviewed-on: https://go-review.googlesource.com/113155
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
A new pass run after ssa building (before any other
optimization) identifies the "first" ssa node for each
statement. Other "noise" nodes are tagged as being never
appropriate for a statement boundary (e.g., VarKill, VarDef,
Phi).
Rewrite, deadcode, cse, and nilcheck are modified to move
the statement boundaries forward whenever possible if a
boundary-tagged ssa value is removed; never-boundary nodes
are ignored in this search (some operations involving
constants are also tagged as never-boundary and also ignored
because they are likely to be moved or removed during
optimization).
Code generation treats all nodes except those explicitly
marked as statement boundaries as "not statement" nodes,
and floats statement boundaries to the beginning of each
same-line run of instructions found within a basic block.
Line number html conversion was modified to make statement
boundary nodes a bit more obvious by prepending a "+".
The code in fuse.go that glued together the value slices
of two blocks produced a result that depended on the
former capacities (not lengths) of the two slices. This
causes differences in the 386 bootstrap, and also can
sometimes put values into an order that does a worse job
of preserving statement boundaries when values are removed.
Portions of two delve tests that had caught problems were
incorporated into ssa/debug_test.go. There are some
opportunities to do better with optimized code, but the
next-ing is not lying or overly jumpy.
Over 4 CLs, compilebench geomean measured binary size
increase of 3.5% and compile user time increase of 3.8%
(this is after optimization to reuse a sparse map instead
of creating multiple maps.)
This CL worsens the optimized-debugging experience with
Delve; we need to work with the delve team so that
they can use the is_stmt marks that we're emitting now.
The reference output changes from time to time depending
on other changes in the compiler, sometimes better,
sometimes worse.
This CL now includes a test ensuring that 99+% of the lines
in the Go command itself (a handy optimized binary) include
is_stmt markers.
Change-Id: I359c94e06843f1eb41f9da437bd614885aa9644a
Reviewed-on: https://go-review.googlesource.com/102435
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Don't do direct loads from argument slots if the sizes don't match.
This prevents us from loading from a float32 using a uint64 load
during expressions like uint64(math.float32Bits(f)) where f is a float32 arg.
Fixes#25322
Change-Id: I3887d76f78c844ba546243e7721d811c3d4a9700
Reviewed-on: https://go-review.googlesource.com/112637
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Initialization of t.UInt is missing from SetTypPtrs in config.go,
preventing rules that use it from matching when they should.
This adds the initialization to allow those rules to work.
Updated test/codegen/rotate.go to test for this case, which
appears in math/bits RotateLeft32 and RotateLeft64. There had been
a testcase for this in go 1.10 but that went away when asm_test.go
was removed.
Change-Id: I82fc825ad8364df6fc36a69a1e448214d2e24ed5
Reviewed-on: https://go-review.googlesource.com/112518
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Move ops can be faster than memmove calls because the number of bytes
to be moved is fixed and they don't incur the overhead of a call.
This change allows memmove to be converted into a Move op when the
arguments are disjoint.
The optimization is only enabled on s390x at the moment, however
other architectures may also benefit from it in the future. The
memmove inlining rule triggers an extra 12 times when compiling the
standard library. It will most likely make more of a difference as the
disjoint function is improved over time (to recognize fresh heap
allocations for example).
Change-Id: I9af570dcfff28257b8e59e0ff584a46d8e248310
Reviewed-on: https://go-review.googlesource.com/110064
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
This test runs independent goroutines modifying a comprehensive variety
of local vars to look for garbage collector regressions. This test has
been verified to trigger issue 22781 on the go1.9.2 tag. This test
expands on test/fixedbugs/issue22781.go.
Tests #22781
Change-Id: Id32f8dde7ef650aea1b1b4cf518e6d045537bfdc
Reviewed-on: https://go-review.googlesource.com/93715
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
replace map clears of the form:
for k := range m {
delete(m, k)
}
(where m is map with key type that is reflexive for ==)
with a new runtime function that clears the maps backing
array with a memclr and reinitializes the hmap struct.
Map key types that for example contain floats are not
replaced by this optimization since NaN keys cannot
be deleted from maps using delete.
name old time/op new time/op delta
GoMapClear/Reflexive/1 92.2ns ± 1% 47.1ns ± 2% -48.89% (p=0.000 n=9+9)
GoMapClear/Reflexive/10 108ns ± 1% 48ns ± 2% -55.68% (p=0.000 n=10+10)
GoMapClear/Reflexive/100 303ns ± 2% 110ns ± 3% -63.56% (p=0.000 n=10+10)
GoMapClear/Reflexive/1000 3.58µs ± 3% 1.23µs ± 2% -65.49% (p=0.000 n=9+10)
GoMapClear/Reflexive/10000 28.2µs ± 3% 10.3µs ± 2% -63.55% (p=0.000 n=9+10)
GoMapClear/NonReflexive/1 121ns ± 2% 124ns ± 7% ~ (p=0.097 n=10+10)
GoMapClear/NonReflexive/10 137ns ± 2% 139ns ± 3% +1.53% (p=0.033 n=10+10)
GoMapClear/NonReflexive/100 331ns ± 3% 334ns ± 2% ~ (p=0.342 n=10+10)
GoMapClear/NonReflexive/1000 3.64µs ± 3% 3.64µs ± 2% ~ (p=0.887 n=9+10)
GoMapClear/NonReflexive/10000 28.1µs ± 2% 28.4µs ± 3% ~ (p=0.247 n=10+10)
Fixes#20138
Change-Id: I181332a8ef434a4f0d89659f492d8711db3f3213
Reviewed-on: https://go-review.googlesource.com/110055
Reviewed-by: Keith Randall <khr@golang.org>
Use conditional moves instead of subtractions with borrow to handle
saturation cases. This allows us to delete the SUBE/SUBEW ops and
associated rules from the SSA backend. Using conditional moves also
means we can detect when shift values are masked so I've added some
new rules to constant fold the relevant comparisons and masking ops.
Also use the new shiftIsBounded() function to avoid generating code
to handle saturation cases where possible.
Updates #25167 for s390x.
Change-Id: Ief9991c91267c9151ce4c5ec07642abb4dcc1c0d
Reviewed-on: https://go-review.googlesource.com/110070
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Rename memclrrange to signify that it does not handle
all types of range clears.
Simplify checks to detect the range clear idiom for
arrays and slices.
Add tests to verify the optimization for the slice
range clear idiom is being applied by the compiler.
Change-Id: I5c3b7c9a479699ebdb4c407fde692f30f377860c
Reviewed-on: https://go-review.googlesource.com/110477
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Now the registration phase looks like:
var cases [4]runtime.scases
var order [8]uint16
selectsend(&cases[0], c1, &v1)
selectrecv(&cases[1], c2, &v2, nil)
selectrecv(&cases[2], c3, &v3, &ok)
selectdefault(&cases[3])
chosen := selectgo(&cases[0], &order[0], 4)
Primarily, this is just preparation for having the compiler open-code
selectsend, selectrecv, and selectdefault.
As a minor benefit, order can now be layed out separately on the stack
in the pointer-free segment, so it won't take up space in the
function's stack pointer maps.
Change-Id: I5552ba594201efd31fcb40084da20b42ea569a45
Reviewed-on: https://go-review.googlesource.com/37933
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
The general policy for the current state of js/wasm is that it only
has to support tests that are also supported by nacl.
The test nilptr3.go makes assumptions about which nil checks can be
removed. Since WebAssembly does not signal on reading a null pointer,
all nil checks have to be explicit.
Updates #18892
Change-Id: I06a687860b8d22ae26b1c391499c0f5183e4c485
Reviewed-on: https://go-review.googlesource.com/110096
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When a loop has bound len(s)-delta, findIndVar detected it and
returned len(s) as (conservative) upper bound. This little lie
allowed loopbce to drop bound checks.
It is obviously more generic to teach prove about relations like
x+d<w for non-constant "w"; we already handled the case for
constant "w", so we just want to learn that if d<0, then x+d<w
proves that x<w.
To be able to remove the code from findIndVar, we also need
to teach prove that len() and cap() are always non-negative.
This CL allows to prove 633 more checks in cmd+std. Most
of them are cases where the code was already testing before
accessing a slice but the compiler didn't know it. For instance,
take strings.HasSuffix:
func HasSuffix(s, suffix string) bool {
return len(s) >= len(suffix) && s[len(s)-len(suffix):] == suffix
}
When suffix is a literal string, the compiler now understands
that the explicit check is enough to not emit a slice check.
I also found a loopbce test that was incorrectly
written to detect an overflow but had a off-by-one (on the
conservative side), so it unexpectly passed with this CL; I
changed it to really trigger the overflow as intended.
Change-Id: Ib5abade337db46b8811425afebad4719b6e46c4a
Reviewed-on: https://go-review.googlesource.com/105635
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
To be effective, this also requires being able to relax constraints
on min/max bound inclusiveness; they are now exposed through a flags,
and prove has been updated to handle it correctly.
Change-Id: I3490e54461b7b9de8bc4ae40d3b5e2fa2d9f0556
Reviewed-on: https://go-review.googlesource.com/104041
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Test both minimum and maximum bound, and prepare
formatting for more advanced tests (inclusive / esclusive bounds).
Change-Id: Ibe432916d9c938343bc07943798bc9709ad71845
Reviewed-on: https://go-review.googlesource.com/104040
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reuse findIndVar to discover induction variables, and then
register the facts we know about them into the facts table
when entering the loop block.
Moreover, handle "x+delta > w" while updating the facts table,
to be able to prove accesses to slices with constant offsets
such as slice[i-10].
Change-Id: I2a63d050ed58258136d54712ac7015b25c893d71
Reviewed-on: https://go-review.googlesource.com/104038
Run-TryBot: Giovanni Bajo <rasky@develer.com>
Reviewed-by: David Chase <drchase@google.com>
When a branch is followed, we apply the relation as described
in the domain relation table. In case the relation is in the
positive domain, we can also infer an unsigned relation if,
by that point, we know that both operands are non-negative.
Fixes#20393
Change-Id: Ieaf0c81558b36d96616abae3eb834c788dd278d5
Reviewed-on: https://go-review.googlesource.com/100278
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Reviewed-by: David Chase <drchase@google.com>
mips64 softfloat support is based on mips implementation and introduces
new enviroment variable GOMIPS64.
GOMIPS64 is a GOARCH=mips64{,le} specific option, for a choice between
hard-float and soft-float. Valid values are 'hardfloat' (default) and
'softfloat'. It is passed to the assembler as
'GOMIPS64_{hardfloat,softfloat}'.
Change-Id: I7f73078627f7cb37c588a38fb5c997fe09c56134
Reviewed-on: https://go-review.googlesource.com/108475
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
On amd64, Ctz must include special handling of zeros.
But the prove pass has enough information to detect whether the input
is non-zero, allowing a more efficient lowering.
Introduce new CtzNonZero ops to capture and use this information.
Benchmark code:
func BenchmarkVisitBits(b *testing.B) {
b.Run("8", func(b *testing.B) {
for i := 0; i < b.N; i++ {
x := uint8(0xff)
for x != 0 {
sink = bits.TrailingZeros8(x)
x &= x - 1
}
}
})
// and similarly so for 16, 32, 64
}
name old time/op new time/op delta
VisitBits/8-8 7.27ns ± 4% 5.58ns ± 4% -23.35% (p=0.000 n=28+26)
VisitBits/16-8 14.7ns ± 7% 10.5ns ± 4% -28.43% (p=0.000 n=30+28)
VisitBits/32-8 27.6ns ± 8% 19.3ns ± 3% -30.14% (p=0.000 n=30+26)
VisitBits/64-8 44.0ns ±11% 38.0ns ± 5% -13.48% (p=0.000 n=30+30)
Fixes#25077
Change-Id: Ie6e5bd86baf39ee8a4ca7cadcf56d934e047f957
Reviewed-on: https://go-review.googlesource.com/109358
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This change implements math.Round as an intrinsic on ppc64x so it can be
done using a single instruction.
benchmark old ns/op new ns/op delta
BenchmarkRound-16 2.60 0.69 -73.46%
Change-Id: I9408363e96201abdfc73ced7bcd5f0c29db006a8
Reviewed-on: https://go-review.googlesource.com/109395
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
The previous change sped up the pure computation form of LeadingZeros8.
This places it somewhat close to the table lookup form.
Depending on something that varies from toolchain to toolchain
(alignment, perhaps?), the slowdown from ditching the table lookup
is either 20% or 5%.
This benchmark is the best case scenario for the table lookup:
It is in the L1 cache already.
I think we're close enough that we can switch to the computational version,
and trust that the memory effects and binary size savings will be worth it.
Code:
func f8(x uint8) { z = bits.LeadingZeros8(x) }
Before:
"".f8 STEXT nosplit size=34 args=0x8 locals=0x0
0x0000 00000 (x.go:7) TEXT "".f8(SB), NOSPLIT, $0-8
0x0000 00000 (x.go:7) FUNCDATA $0, gclocals·2a5305abe05176240e61b8620e19a815(SB)
0x0000 00000 (x.go:7) FUNCDATA $1, gclocals·33cdeccccebe80329f1fdbee7f5874cb(SB)
0x0000 00000 (x.go:7) MOVBLZX "".x+8(SP), AX
0x0005 00005 (x.go:7) MOVBLZX AL, AX
0x0008 00008 (x.go:7) LEAQ math/bits.len8tab(SB), CX
0x000f 00015 (x.go:7) MOVBLZX (CX)(AX*1), AX
0x0013 00019 (x.go:7) ADDQ $-8, AX
0x0017 00023 (x.go:7) NEGQ AX
0x001a 00026 (x.go:7) MOVQ AX, "".z(SB)
0x0021 00033 (x.go:7) RET
After:
"".f8 STEXT nosplit size=30 args=0x8 locals=0x0
0x0000 00000 (x.go:7) TEXT "".f8(SB), NOSPLIT, $0-8
0x0000 00000 (x.go:7) FUNCDATA $0, gclocals·2a5305abe05176240e61b8620e19a815(SB)
0x0000 00000 (x.go:7) FUNCDATA $1, gclocals·33cdeccccebe80329f1fdbee7f5874cb(SB)
0x0000 00000 (x.go:7) MOVBLZX "".x+8(SP), AX
0x0005 00005 (x.go:7) MOVBLZX AL, AX
0x0008 00008 (x.go:7) LEAL 1(AX)(AX*1), AX
0x000c 00012 (x.go:7) BSRL AX, AX
0x000f 00015 (x.go:7) ADDQ $-8, AX
0x0013 00019 (x.go:7) NEGQ AX
0x0016 00022 (x.go:7) MOVQ AX, "".z(SB)
0x001d 00029 (x.go:7) RET
Change-Id: Icc7db50a7820fb9a3da8a816d6b6940d7f8e193e
Reviewed-on: https://go-review.googlesource.com/108942
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
We currently rewrite
(TESTQ (MOVQconst [c] x)) into (TESTQconst [c] x)
and (TESTQconst [-1] x) into (TESTQ x x)
if x is a (MOVQconst [-1]) we will be stuck in the endless rewrite loop.
Don't perform the rewrite in such cases.
Fixes#25006
Change-Id: I77f561ba2605fc104f1e5d5c57f32e9d67a2c000
Reviewed-on: https://go-review.googlesource.com/108879
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Rewrite x<<1+c into x+x+c, which can be expressed as a single LEAQ/LEAL.
Bit of a special case, but the single-instruction
LEA is both shorter and faster than SHL then ADD.
Triggers 293 times during make.bash.
Change-Id: I3f09c8e9a8f3859d1eeed336f095fc3ada79c2c1
Reviewed-on: https://go-review.googlesource.com/108938
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This triggers three times while building std,
once in image/png and twice in go/internal/gccgoimporter.
There are no instances in std in which a more aggressive
optimization would have triggered.
This doesn't necessarily avoid an allocation,
because escape analysis is already able in many cases
to use a temporary backing for the string,
but it does at a minimum avoid the runtime call and copy.
Fixes#24937
Change-Id: I7019e85638ba8cd7e2f03890e672558b858579bc
Reviewed-on: https://go-review.googlesource.com/108035
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Due to some recent optimizations related to the compare
instruction, DS-form load instructions started to be used
to load 8-byte go.strings. This can cause link time errors
if the go.string is not aligned to 4 bytes.
For DS-form instructions, the value in the offset field must
be a multiple of 4. If the offset is known at the time the
rules are processed, a DS-form load will not be chosen. But for
go.strings, the offset is not known at that time, but a
relocation is generated indicating that the linker should fill
in the DS relocation. When the linker tries to fill in the
relocation, if the offset is not aligned properly, a link error
will occur.
To fix this, when loading a go.string using MOVDload, the full
address of the go.string is generated and loaded into the base
register. Then the go.string is loaded with a 0 offset field.
Added a testcase that reproduces this problem.
Fixes#24799
Change-Id: I6a154e8e1cba64eae290be0fbcb608b75884ecdd
Reviewed-on: https://go-review.googlesource.com/107855
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
The escape analysis models the flow of "content" of X with a
level of "indirection" (OIND node) of X. This content can be
pointer dereference, or slice/string element. For the latter
case, the type of the OIND node should be the element type of
the slice/string. This CL fixes this. In particular, this
matters when the element type is pointerless, where the data
flow should not cause any escape.
Fixes#15730.
Change-Id: Iba9f92898681625e7e3ddef76ae65d7cd61c41e0
Reviewed-on: https://go-review.googlesource.com/107597
Reviewed-by: David Chase <drchase@google.com>
If both inputs are constant offsets from the same pointer then we
can evaluate NeqPtr and EqPtr at compile time. Triggers a few times
during all.bash. Removes a conditional branch in the following
code:
copy(x[1:], x[:])
This branch was recently added as an optimization in CL 94596. We
now skip the memmove if the pointers are equal. However, in the
above code we know at compile time that they are never equal.
Also, when the offset is variable, check if the offset is zero
rather than if the pointers are equal. For example:
copy(x[a:], x[:])
This would now skip the copy if a == 0, rather than if x + a == x.
Finally I've also added a rule to make IsNonNil true for pointers
to values on the stack. The nil check elimination pass will catch
these anyway, but eliminating them here might eliminate branches
earlier.
Change-Id: If72f436fef0a96ad0f4e296d3a1f8b6c3e712085
Reviewed-on: https://go-review.googlesource.com/106635
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
While writing CL 107315, I went back and forth for the syntax used for
constraints of build environments in which the architecture did not
support varitants ("plan9/amd64" vs "plan9/amd64/"). I eventually
settled for the latter because the code required less heuristics
(think parsing "plan9/386" vs "386/sse2") but there were a few
leftovers in code and comments.
Change-Id: I9d9a008f3814f9a1642609650eb571e7f1a675cf
Reviewed-on: https://go-review.googlesource.com/107338
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This CL makes the codegen testsuite automatically test all
architecture variants for architecture specified in tests. For
instance, if a test file specifies a "arm" test, it will be
automatically run on all GOARM variants (5,6,7), to increase
the coverage.
The CL also introduces a syntax to specify only a specific
variant (eg: "arm/7") in case the test makes sense only there.
The same syntax also allows to specify the operating system
in case it matters (eg: "plan9/386/sse2").
Fixes#24658
Change-Id: I2eba8b918f51bb6a77a8431a309f8b71af07ea22
Reviewed-on: https://go-review.googlesource.com/107315
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
And remove it from asmtest. Next CL will remove the whole
asmtest infrastructure.
Change-Id: I5851bf7c617456d62a3c6cffacf70252df7b056b
Reviewed-on: https://go-review.googlesource.com/107335
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The escape analysis models "loop depth". If the address of an
expression is assigned to something defined at a lower (outer)
loop depth, the escape analysis decides it escapes. However, it
uses the loop depth of the address operator instead of where
the RHS is defined. This causes an unnecessary escape if there is
an assignment inside a loop but the RHS is defined outside the
loop. This CL propagates the loop depth.
Fixes#24730.
Change-Id: I5ff1530688bdfd90561a7b39c8be9bfc009a9dae
Reviewed-on: https://go-review.googlesource.com/105257
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
I was wrong. There was a need to loop here.
Fixes#24761
Change-Id: If13b3ab72febde930bdaebdddd1c05e0d0446020
Reviewed-on: https://go-review.googlesource.com/105615
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
And delete them from asm_test.
Also delete an arm64 cmov test has been already ported to the new test
harness.
Change-Id: I4458721e1f512bc9ecbbe1c22a2c9c7109ad68fe
Reviewed-on: https://go-review.googlesource.com/106335
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
The check was previously disallowing package main from even importing
a non-function symbol named "main".
Fixes#24801.
Change-Id: I849b9713890429f0a16860ef16b5dc7e970d04a4
Reviewed-on: https://go-review.googlesource.com/106120
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
And delete them from asm_test.
Change-Id: I24f421b87e8cb4770c887a6dfd58eacd0088947d
Reviewed-on: https://go-review.googlesource.com/106056
Reviewed-by: Keith Randall <khr@golang.org>
And delete them from asm_test.
Change-Id: I9a75efe9858ef9d7ac86065f860c2ae3f25b0941
Reviewed-on: https://go-review.googlesource.com/105597
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Also, when statically building itabs, compare *types.Sym instead of
name alone so that method sets with duplicate non-exported methods are
handled correctly.
Fixes#24693.
Change-Id: I2db8a3d6e80991a71fef5586a15134b6de116269
Reviewed-on: https://go-review.googlesource.com/105039
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Previously, constant pointer-typed expressions could use either Mpint
or NilVal as their Val depending on their construction, but const.go
expects each type to have a single corresponding Val kind.
This CL changes pointer-typed expressions to exclusively use Mpint.
Fixes#21221.
Change-Id: I6ba36c9b11eb19a68306f0b296acb11a8c254c41
Reviewed-on: https://go-review.googlesource.com/105315
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Multi-byte comparison operations were used on amd64, arm64, i386
and s390x for comparisons with constant arrays, but only amd64 and
i386 for comparisons with string constants. This CL combines the
check for platform capability, since they have the same requirements,
and also enables both on ppc64le which also supports load merging.
Note that these optimizations currently use little endian byte order
which results in byte reversal instructions on s390x. This should
be fixed at some point.
Change-Id: Ie612d13359b50c77f4d7c6e73fea4a59fa11f322
Reviewed-on: https://go-review.googlesource.com/102558
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
And delete them from asm_test.
Change-Id: I0e33d58274951ab5acb67b0117b60ef617ea887a
Reviewed-on: https://go-review.googlesource.com/105735
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Method expressions with anonymous receiver types like "struct { T }.m"
require wrapper functions, which we weren't always creating. This in
turn resulted in linker errors.
This CL ensures that we generate wrapper functions for any anonymous
receiver types used in a method expression.
Fixes#22444.
Change-Id: Ia8ac27f238c2898965e57b82a91d959792d2ddd4
Reviewed-on: https://go-review.googlesource.com/105044
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
There were multiple ad hoc ways to create method symbols, with subtle
and confusing differences between them. This CL unifies them into a
single well-documented encoding and implementation.
This introduces some inconsequential changes to symbol format for the
sake of simplicity and consistency. Two notable changes:
1) Symbol construction is now insensitive to the package currently
being compiled. Previously, non-exported methods on anonymous types
received different method symbols depending on whether the method was
local or imported.
2) Symbols for method values parenthesized non-pointer receiver types
and non-exported method names, and also always package-qualified
non-exported method names. Now they use the same rules as normal
method symbols.
The methodSym function is also now stricter about rejecting
non-sensical method/receiver combinations. Notably, this means that
typecheckfunc needs to call addmethod to validate the method before
calling declare, which also means we no longer emit errors about
redeclaring bogus methods.
Change-Id: I9501c7a53dd70ef60e5c74603974e5ecc06e2003
Reviewed-on: https://go-review.googlesource.com/104876
Reviewed-by: Robert Griesemer <gri@golang.org>
Since it's been reliably failing on one of the linux-arm builders
(arm5spacemonkey) for a long time.
Updates #24221.
Change-Id: I8fccc7e16631de497ccc2c285e510a110a93ad95
Reviewed-on: https://go-review.googlesource.com/104535
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
And delete them from asm_test.
Change-Id: Id533130470da9176a401cb94972f626f43a62148
Reviewed-on: https://go-review.googlesource.com/103656
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
The logic in addBranchRestrictions didn't allow to correctly
model OpIs(Slice)Bound for signed domain, and it was also partly
implemented within addRestrictions.
Thanks to the previous changes, it is now possible to handle
the negative conditions correctly, so that we can learn
both signed/LT + unsigned/LT on the positive side, and
signed/GE + unsigned/GE on the negative side (but only if
the index can be proved to be non-negative).
This is able to prove ~50 more slice accesses in std+cmd.
Change-Id: I9858080dc03b16f85993a55983dbc4b00f8491b0
Reviewed-on: https://go-review.googlesource.com/104037
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Don't report errors if we don't have a correct type switch
guard; instead ignore it and leave it to the type-checker
to report the error. This leads to better error messages
concentrating on the type switch guard rather than errors
around (confusing) syntactic details.
Also clean up some code setting up AssertExpr (they never
have a nil Type field) and remove some incorrect TODOs.
Fixes#24470.
Change-Id: I69512f36e0417e3b5ea9c8856768e04b19d654a8
Reviewed-on: https://go-review.googlesource.com/103615
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
When test/run script was removed, these two tests
were changed to be executed by test/run.go.
Because errchk does not exit with non-zero status on
errors, they were silently failing for a while.
This change makes 2 things:
1. Compile tested packages in GOROOT/test to match older runner script
behavior (strictly required only in bug345, optional in bug248)
2. Check command output with "(?m)^BUG" regexp.
It approximates older `grep -q '^BUG' that was used before.
See referenced issue for detailed explanation.
Fixes#24629
Change-Id: Ie888dcdb4e25cdbb19d434bbc5cb03eb633e9ee8
Reviewed-on: https://go-review.googlesource.com/104095
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
CL 38338 introduced SSA rules to optimize two types of pointer equality
tests: a pointer compared with itself, and comparison of addresses taken
of two symbols which may have the same base. This patch adds rules to
apply the same optimization to pointer inequality tests, which also ensures
that two pointers to zero-width types cannot be both equal and unequal
at the same time.
Fixes#24503.
Change-Id: Ic828aeb86ae2e680caf66c35f4c247674768a9ba
Reviewed-on: https://go-review.googlesource.com/102275
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
And delete them from asm_test.
Change-Id: Idfe1249052d82d15b9c30b292c78656a0bf7b48d
Reviewed-on: https://go-review.googlesource.com/103315
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This change modifies the codegen test harness driver so that it no
longer modifies the environment GOOS/GOARCH, since that seems to cause
flakiness in other concurrently-running tests.
The change also enables the codegen tests in run.go.
Fixes#24538
Change-Id: I997ac1eb38eb92054efff67fe5c4d3cccc86412b
Reviewed-on: https://go-review.googlesource.com/103455
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The escape_because.go test file (which tests the "because" escape
explainations printed by `-m -m`) cointains a machine-generated list
of all the escape reasons seen in the escape tests.
The list appears to be outdated; moreove a new escape reason was added
in CL 102895. This change re-generates the list.
Change-Id: Idc721c6bbfe9516895b5cf1e6d09b77deda5a3dd
Reviewed-on: https://go-review.googlesource.com/103375
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change makes `-m -m` print a better explanation for the case
where a slice is marked as escaping and heap-allocated because it
has a non-constant len/cap.
Fixes#24578
Change-Id: I0ebafb77c758a99857d72b365817bdba7b446cc0
Reviewed-on: https://go-review.googlesource.com/102895
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
In expandmeth, we call expand1/expand0 to build a list of all
candidate methods to promote, and then we use dotpath to prune down
which names actually resolve to a promoted method and how.
However, previously we still computed "followsptr" based on the
expand1/expand0 traversal (which is depth-first), rather than
dotpath (which is breadth-first). The result is that we could
sometimes end up miscomputing whether a particular promoted method
involves a pointer traversal, which could result in bad code
generation for method trampolines.
Fixes#24547.
Change-Id: I57dc014466d81c165b05d78b98610dc3765b7a90
Reviewed-on: https://go-review.googlesource.com/102618
Reviewed-by: Robert Griesemer <gri@golang.org>
And delete them from asm_test.
Change-Id: I34fcf85ae8ce09cd146fe4ce6a0ae7616bd97e2d
Reviewed-on: https://go-review.googlesource.com/102296
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
And remove them from asm_test.
Change-Id: I1ca29b40546d6de06f20bfd550ed8ff87f495454
Reviewed-on: https://go-review.googlesource.com/102115
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
And delete them from asm_test.
Change-Id: I64c512bfef3b3da6db5c5d29277675dade28b8ab
Reviewed-on: https://go-review.googlesource.com/101595
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
The atomic add instructions modify the condition code and so need to
be marked as clobbering flags.
Fixes#24449.
Change-Id: Ic69c8d775fbdbfb2a56c5e0cfca7a49c0d7f6897
Reviewed-on: https://go-review.googlesource.com/101455
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
And delete them from asm_test.
Change-Id: I3cf0934706a640136cb0f646509174f8c1bf3363
Reviewed-on: https://go-review.googlesource.com/101395
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
And delete them from asm_test.
Change-Id: Ibdaca3496eefc73c731b511ddb9636a1f3dff68c
Reviewed-on: https://go-review.googlesource.com/100915
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
And delete them from asm_test.
Change-Id: I29c8d098a8893e6b669b6272a2f508985ac9d618
Reviewed-on: https://go-review.googlesource.com/100876
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This reverts commit 080187f4f7.
It broke build of golang.org/x/exp/shiny/iconvg
See issue 24395 for details
Change-Id: Ifd6134f6214e6cee40bd3c63c32941d5fc96ae8b
Reviewed-on: https://go-review.googlesource.com/100755
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This change ports all the remaining tests checking that small memmoves
are replaced with MOVs to the new codegen test harness, and deletes
them from the asm_test file.
Change-Id: I01c94b441e27a5d61518035af62d62779dafeb56
Reviewed-on: https://go-review.googlesource.com/100476
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Add tests for the "negative size argument in make.*" and "size argument
too large in make.*" error messages to appear at call sites in case the
size is a const defined on another line.
As suggested by Matthew in a comment on CL 69910.
Change-Id: I5c33d4bec4e3d20bb21fe8019df27999997ddff3
Reviewed-on: https://go-review.googlesource.com/100395
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
As a side effect of working on mid-stack inlining, we've fixed support
for inlining variadic functions. Might as well enable it.
Change-Id: I7f555f8b941969791db7eb598c0b49f6dc0820aa
Reviewed-on: https://go-review.googlesource.com/100456
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Currently, order desugars map assignment operations like
m[k] op= r
into
m[k] = m[k] op r
which in turn is transformed during walk into:
tmp := *mapaccess(m, k)
tmp = tmp op r
*mapassign(m, k) = tmp
However, this is suboptimal, as we could instead produce just:
*mapassign(m, k) op= r
One complication though is if "r == 0", then "m[k] /= r" and "m[k] %=
r" will panic, and they need to do so *before* calling mapassign,
otherwise we may insert a new zero-value element into the map.
It would be spec compliant to just emit the "r != 0" check before
calling mapassign (see #23735), but currently these checks aren't
generated until SSA construction. For now, it's simpler to continue
desugaring /= and %= into two map indexing operations.
Fixes#23661.
Change-Id: I46e3739d9adef10e92b46fdd78b88d5aabe68952
Reviewed-on: https://go-review.googlesource.com/91557
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
cmd/asm now supports three-operand form of IMUL,
so instead of using IMUL with resultInArg0, emit IMUL3 instruction.
This results in less redundant MOVs where SSA assigns
different registers to input[0] and dst arguments.
Note: these have exactly the same encoding when reg0=reg1:
IMUL3x $const, reg0, reg1
IMULx $const, reg
Two-operand IMULx is like a crippled IMUL3x, with dst fixed to input[0].
This is why we don't bother to generate IMULx for the case where
dst is the same as input[0].
Change-Id: I4becda475b3dffdd07b6fdf1c75bacc82af654e4
Reviewed-on: https://go-review.googlesource.com/99656
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Reviewed-by: Keith Randall <khr@golang.org>
Remove old tests from asm_test.
Change-Id: Ib408ec7faa60068bddecf709b93ce308e0ef665a
Reviewed-on: https://go-review.googlesource.com/100075
Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com>
