Change-Id: Ic16824482142d4de4d0b949459e36505ee944ff7
Reviewed-on: https://go-review.googlesource.com/c/go/+/448175
Reviewed-by: Robert Griesemer <gri@google.com>
Run-TryBot: Dan Kortschak <dan@kortschak.io>
Auto-Submit: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Dan Kortschak <dan@kortschak.io>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
For #46746
Change-Id: I75ddb9ce24cd3394186562dae156fef9fe2d55d3
Reviewed-on: https://go-review.googlesource.com/c/go/+/447798
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Change-Id: I871a747b4b47bccc889f2fdc93a2bcebb041b719
Reviewed-on: https://go-review.googlesource.com/c/go/+/447895
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Currently locations are stored in a map and looked up by ID from
the map. The IDs are usually small sequential integers (the Go
pprof CPU profiles are so). Using a slice is more efficient (with
a fallback map to handle weirdly large IDs).
Change-Id: I9e20d5cebca3a5239636413e1bf2f0b273038031
Reviewed-on: https://go-review.googlesource.com/c/go/+/447803
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Now that most GOROOT packages do not have install targets, their
staleness depends on whether their builds have been cached. That means
that, from a clean cache, once
TestNewReleaseRebuildsStalePackagesInGOPATH builds certain targets, they
will stay non-stale for the second run of the test, becasue the will
still be in the cache. So the first run of the test from a clean cache
will pass and the second will fail. Set GOCACHE to a temporary directory
in the test to use a clean cache and avoid this.
Change-Id: I91f954138a4723d81545134441148badbfc515f5
Reviewed-on: https://go-review.googlesource.com/c/go/+/448018
Reviewed-by: Bryan Mills <bcmills@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Rather than matching calls to edges in the profile based directly on
line number in the source file, use the line offset from the start of
the function. This makes matching robust to changes in the source file
above the function containing the call.
The start line in the profile comes from Function.start_line, which is
included in Go pprof output since CL 438255.
Currently it is an error if no samples set start_line to help users
detect profiles missing this information. In the future, we should
fallback to using absolute lines, which is better than nothing.
For #55022.
Change-Id: Ie621950cfee1fef8fb200907a2a3f1ded41d04fa
Reviewed-on: https://go-review.googlesource.com/c/go/+/447315
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Michael Pratt <mpratt@google.com>
Auto-Submit: Michael Pratt <mpratt@google.com>
When adding weights for a call stack, for recursive calls, to
avoid double counting we check if we already saw the node and the
edge. We check the node first. An edge can be repeated if the node
is repeated. Most stacks are not recursive, so check repeated edge
only conditionally.
Change-Id: I4b8f039289dcd3383ca89593d6d16d903b94c3dd
Reviewed-on: https://go-review.googlesource.com/c/go/+/447804
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
Now that misc/cgo/test doesn't invoke any Go builds itself, we don't
need to use GOFLAGS to thread build flags down into sub-builds.
Preparation for #37486.
Change-Id: I9ecdd215da5c21339cbf76765f8be2190d19539c
Reviewed-on: https://go-review.googlesource.com/c/go/+/447356
Reviewed-by: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Run-TryBot: Austin Clements <austin@google.com>
When we were first introducing module mode, CL 163418 moved many of
the tests in misc/cgo/test into their own test binary under testdata
so misc/cgo/test continued to work in both GOPATH mode and module
mode. This introduce a somewhat complicated test driver into
misc/cgo/test. Since the misc/cgo/test test had to invoke "go test" as
a subprocess, this required care to thread any build flags down into
the subprocess. The output from any failures of the sub-process was
also less than ideal.
Now that we don't have to worry about running these in GOPATH mode any
more, this CL moves all of the tests back into misc/cgo/test and drops
the test driver.
There are two slight complications:
- Test41761 was added after this split and has a C type "S" that's
also present in misc/cgo/test itself. We rename that to keep that
test working.
- TestCgo in go/internal/srcimporter now fails to import misc/cgo/test
because misc/cgo/test now contains imports of other "misc" module
packages and the importer it sets up isn't configured to allow that.
We fix this by setting up a build context that's configured for
this.
Preparation for #37486.
Change-Id: I3c4f73540e0482bbd493823cca44b0ce7fac01f3
Reviewed-on: https://go-review.googlesource.com/c/go/+/447355
Reviewed-by: Bryan Mills <bcmills@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Currently in the pprof Graph, a Node's in/out edges are
represented as maps, keyed by the source/destination Nodes. For a
Node it usually has a very small number of edges, so linear search
would be generally faster than map operations. Use slices and
linear search instead.
Change-Id: I5ab06be0c019373cd3a845b9f3282731372e9c4c
Reviewed-on: https://go-review.googlesource.com/c/go/+/447802
Reviewed-by: Michael Pratt <mpratt@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
We intentionally don't use file path so it is resilient to code
moving. OrigName and Objfile are also not used currently. Remove
them. (We can add them back if it turns out to be useful.)
Change-Id: I7975d78c874bc21475b9119301088452a4426cb9
Reviewed-on: https://go-review.googlesource.com/c/go/+/447801
Reviewed-by: Michael Pratt <mpratt@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
We don't use it. Make graph building a little faster.
Change-Id: I4a6f516f8e68bf338be8350f91c51f6f1dea26bc
Reviewed-on: https://go-review.googlesource.com/c/go/+/447800
Reviewed-by: Michael Pratt <mpratt@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Default concurrency is now GOMAXPROCS, though this is normally
reduced to 4 by the go build commmand.
If compiler flags don't permit concurrency, silently
turn it down instead of failing the compilation.
Change-Id: Id26cc3214e0ca402d60f915e98276a58d809e097
Reviewed-on: https://go-review.googlesource.com/c/go/+/447358
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@google.com>
Semicolon has bad copy-paste ergonomics; it requires quoting.
Slash is okay, and won't be a separator ever in debug strings
because it is already used in e.g. ssa/phase/debug=etc.
Change-Id: I493360e9282666eea1a342971a77df2ebd6c92ad
Reviewed-on: https://go-review.googlesource.com/c/go/+/447975
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
With CL 447015, we identify hot callees from edge weights, but
the code only traverses edges for calls from the current package.
If the callee is in a different package, when compiling that
package, the edge was not visited, so the callee was not actually
marked inline candidate. This CL fixes it by traversing all hot
edges.
Change-Id: If668c1a16ebe34e3474376b88ab3a84be76b8562
Reviewed-on: https://go-review.googlesource.com/c/go/+/448015
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
This may fix the TestEINTR failures that have been frequent on the
riscv64 builders since CL 445597.
Updates #37405.
Updates #39043.
Change-Id: Iaf1403ff5ce2ff0203d5d0059908097d32d0b217
Reviewed-on: https://go-review.googlesource.com/c/go/+/447495
Auto-Submit: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
Change-Id: I9bcaba0ca9c30b204bf126dbfec4cd48d9ebe2ea
Reviewed-on: https://go-review.googlesource.com/c/go/+/447896
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Auto-Submit: Than McIntosh <thanm@google.com>
Run-TryBot: xie cui <523516579@qq.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Fixes a bug that was introduced in CL 410414; in that CL, to avoid
a race condition in the initialization of the lexer, the setting
of the breakOK and continueOK options was moved to before
Tree.funcs was populated from parameters. As a result, the parser
missed the fact that 'break' and 'continue' were defined as functions.
Following CL 421883 race conditions are no longer an issue, so
the simplest fix is just to move the initialization where it was
before - in startParse, after t.funcs has been set.
Fixes#56538
Change-Id: I3b99fe9ad12255a4f6eb9a00eb3f64529ff055c0
Reviewed-on: https://go-review.googlesource.com/c/go/+/447775
Run-TryBot: Eli Bendersky <eliben@golang.org>
Auto-Submit: Eli Bendersky <eliben@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Eli Bendersky <eliben@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Fixes#55301
Change-Id: Ie8abcd383eee9af75038bde908ac638f43d33b7e
Reviewed-on: https://go-review.googlesource.com/c/go/+/444955
Reviewed-by: Bryan Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: xie cui <523516579@qq.com>
Plan 9 uses NUL as os.PathListSeparator, so it's almost always going
to appear in the environment variable list. Exempt GOOS=plan9 from the
check for NUL in environment variables.
For #56284.
Fixes#56544.
Change-Id: I23df233cdf20c0a9a606fd9253e15a9b5482575a
Reviewed-on: https://go-review.googlesource.com/c/go/+/447715
Reviewed-by: David du Colombier <0intro@gmail.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Damien Neil <dneil@google.com>
The automatic resultInArg0 register check has been implemented by CL 296010.
Change-Id: Id0e085ded9aa097bd02593c359a750d938a3aaa6
Reviewed-on: https://go-review.googlesource.com/c/go/+/416034
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Wayne Zuo <wdvxdr@golangcn.org>
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
There is existing code that calls flag.Lookup("test.v") and inspects
the value. That stopped working as of CL 443596. Make code like that
continue to work at least for the case where we aren't using
-test.v=test2json.
Change-Id: Idb30b149b48ee3987a201e349cf4d9bfe9ddee56
Reviewed-on: https://go-review.googlesource.com/c/go/+/447796
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Auto-Submit: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Handle emitting (to ld) or resolving commonly used ELFv2 1.5
relocations. The new ISA provides PC relative addressing with
34 bit signed addresses, and many other relocations which can
replace addis + d-form type relocations with a single prefixed
instruction.
Updates #44549
Change-Id: I7d4f4314d1082daa3938f4353826739be35b0e81
Reviewed-on: https://go-review.googlesource.com/c/go/+/355149
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
Prior to Go 1.18, ineffectual //go:linkname directives (i.e.,
directives referring to an undeclared name, or to a declared type or
constant) were treated as noops. In Go 1.18, we changed this into a
compiler error to mitigate accidental misuse.
However, the x/sys repo contained ineffectual //go:linkname directives
up until go.dev/cl/274573, which has caused a lot of user confusion.
It seems a bit late to worry about now, but to at least prevent
further user pain, this CL changes the error message to only apply to
modules using "go 1.18" or newer. (The x/sys repo declared "go 1.12"
at the time go.dev/cl/274573 was submitted.)
Fixes#55889.
Change-Id: Id762fff96fd13ba0f1e696929a9e276dfcba2620
Reviewed-on: https://go-review.googlesource.com/c/go/+/447755
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
fmt.Sprint should be called instead of fmt.Sprintf as is done
elsewhere in exec.go
Change-Id: I730c1f02238fccb24323701b587d3bf1391c9f62
Reviewed-on: https://go-review.googlesource.com/c/go/+/447656
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This needs to be as low as possible while not breaking priority
assumptions of other scores to correctly schedule carry chains.
Prior to the arm64 changes, it was set below ReadTuple. At the time,
this prevented the MulHiLo implementation on PPC64 from occluding
the scheduling of a full carry chain.
Memory scores can also prevent better scheduling, as can be observed
with crypto/internal/edwards25519/field.feMulGeneric.
Fixes#56497
Change-Id: Ia4b54e6dffcce584faf46b1b8d7cea18a3913887
Reviewed-on: https://go-review.googlesource.com/c/go/+/447435
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
This reverts CL 447335.
Reason for revert: broke test on solaris-amd64-oraclerel, which does have a TZ database but has a non-UTC system time zone.
Change-Id: Id61f182d331fc5ca8475845fe0ebf3f1d105d8a3
Reviewed-on: https://go-review.googlesource.com/c/go/+/447756
Reviewed-by: Than McIntosh <thanm@google.com>
Auto-Submit: Bryan Mills <bcmills@google.com>
TryBot-Bypass: Bryan Mills <bcmills@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
Reviewed-by: Quim Muntal <quimmuntal@gmail.com>
go/build attempts to parse comments at the beginning of non-Go files
looking for //go:build or //+go build comments. Before this change,
if the beginning of the non-Go file failed to parse (perhaps because
it is in a format that isn't even meant to be built with Go code) the
file would be added to InvalidGoFiles. The comment for InvalidGoFiles
states that it contains Go files, so this is clearly incorrect
behavior.
Further, if there was a directory that only contained these unparsable
non-Go files, it would have a non-zero number of InvalidGoFiles, and
the matching code in cmd/go/internal/search/search.go in
(*Match).MatchDirs would treat it as a directory containing (invalid)
Go files and would match the directory as a Go package. This incorrect
behavior is also fixed by this CL.
Fixes#56509
Change-Id: Id0d905827c71f7927f7c2fa42b236181950af7e9
Reviewed-on: https://go-review.googlesource.com/c/go/+/447357
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
Benchmarking suggests about a 14-17% reduction in user build time,
about 3.5-7.8% reduction for wall time. This helps most builds
because small packages are common. Latest benchmarks (after the last
round of improvement):
(12 processors) https://perf.golang.org/search?q=upload:20221102.20
(GOMAXPROCS=2) https://perf.golang.org/search?q=upload:20221103.1
(48 processors) https://perf.golang.org/search?q=upload:20221102.19
(The number of compiler workers is capped at min(4, GOMAXPROCS))
An earlier, similar version of this CL at one point observed a 27%
reduction in user build time (building 40+ benchmarks, 20 times), but
the current form is judged to be the most reliable; it may be
profitable to tweak the numbers slightly later, and/or to adjust the
number of compiler workers.
We've talked about doing this in the past, the "new"(ish) metrics
package makes it a more tractable proposition.
The method here is:
1. If os.Getenv("GOGC") is empty, then increase GOGC to a large value,
calculated to grow the heap to 32 + 4 * compile_parallelism before a
GC occurs (e.g., on a >= 4 processor box, 64M). In practice,
sometimes GC occurs before that, but this still results in fewer GCs
and saved time. This is "heap goal".
2. Use a finalizer to approximately detect when GC occurs, and use
runtime metrics to track progress towards the goal heap size,
readjusting GOGC to retarget it as necessary. Reset GOGC to 100 when
the heap is "close enough" to the goal.
One feared failure mode of doing this is that the finalizer will be
slow to run and the heap will grow exceptionally large before GOGC is
reset; I monitored the heap size at reset and exit across several
boxes with a variety of processor counts and extra noise
(including several builds in parallel, including a laptop with a busy
many-tabs browser running) and overshoot effectively does not occur.
In some cases the compiler's heap grows so rapidly that estimated live
exceeds the GC goal, but this is not delayed-finalizer overshoot; the
compiler is just using that much memory. In a small number of cases
(3% of GCs in make.bash) the new goal is larger than predicted by as
much as 38%, so check for that and redo the adjustment.
I considered instead using the maximum heap size limit +
GC-detecting-finalizer + reset instead, but to me that seemed like it
might have a worse bad-case outcome; if the reset is delayed, it's
possible the GC would start running frequently, making it harder to
run the finalizer, reach 50% utilization, and the extra GCs would
lose the advantage. This might also perform badly in the case that a
rapidly growing heap outruns goal. In practice, this sort of
overshoot hasn't been observed, and a goal of 64M is small enough to
tolerate plenty of overshoot anyway.
This version of the CL includes a comment urging anyone who sees the
code and thinks it would work for them, to update a bug (to be
created if the CL is approved) with information about their
situation/experience, so that we may consider creating some more
official and reliable way of obtaining the same result.
Change-Id: I45df1c927c1a7d7503ade1abd1a3300e27516633
Reviewed-on: https://go-review.googlesource.com/c/go/+/436235
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The stack pointer must lie within system stack limits
when Control Flow Guard (CFG) is enabled on Windows.
This CL updates runtime.sigtramp to honor this restriction by
porting some code from the windows/arm64 version, which
already supports CFG.
Fixes#53560
Change-Id: I7f88f9ae788b2bac38aac898b2567f1bea62f8f3
Reviewed-on: https://go-review.googlesource.com/c/go/+/437559
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
Run-TryBot: Michael Pratt <mpratt@google.com>
In following with Roland's TODO, switch TestDisableSHA1ForCertOnly to ParseRevocationList(...) over ParseCRL(...).
Change-Id: I8cdaf04ad0a1c8b94303415ae41933657067041e
GitHub-Last-Rev: bb2ef760e4
GitHub-Pull-Request: golang/go#56541
Reviewed-on: https://go-review.googlesource.com/c/go/+/447036
Reviewed-by: Roland Shoemaker <roland@golang.org>
Run-TryBot: Roland Shoemaker <roland@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Roland Shoemaker <roland@golang.org>
This adds a -d debug flag "fmahash" for hashcode search for
floating point architecture-dependent problems. This variable has no
effect on architectures w/o fused-multiply-add.
This was rebased onto the GOSSAHASH renovation so that this could have
its own dedicated environment variable, and so that it would be
cheap (a nil check) to check it in the normal case.
Includes a basic test of the trigger plumbing.
Sample use (on arm64, ppc64le, s390x):
% GOCOMPILEDEBUG=fmahash=001110110 \
go build -o foo cmd/compile/internal/ssa/testdata/fma.go
fmahash triggered main.main:24 101111101101111001110110
GOFMAHASH triggered main.main:20 010111010000101110111011
1.0000000000000002 1.0000000000000004 -2.220446049250313e-16
exit status 1
The intended use is in conjunction with github.com/dr2chase/gossahash,
which will probably acquire a flag "-fma" to streamline its use. This
tool+use was inspired by an ad hoc use of this technique "in anger"
to debug this very problem. This is also a dry-run for using this
same technique to identify code sensitive to loop variable
lifetime/capture, should we make that change.
Example intended use, with current search tool (using old environment
variable), for a test example:
gossahash -e GOFMAHASH GOMAGIC=GOFMAHASH go run fma.go
Trying go args=[...], env=[GOFMAHASH=1 GOMAGIC=GOFMAHASH]
go failed (81 distinct triggers): exit status 1
Trying go args=[...], env=[GOFMAHASH=11 GOMAGIC=GOFMAHASH]
go failed (39 distinct triggers): exit status 1
Trying go args=[...], env=[GOFMAHASH=011 GOMAGIC=GOFMAHASH]
go failed (18 distinct triggers): exit status 1
Trying go args=[...], env=[GOFMAHASH=0011 GOMAGIC=GOFMAHASH]
Trying go args=[...], env=[GOFMAHASH=1011 GOMAGIC=GOFMAHASH]
...
Trying go args=[...], env=[GOFMAHASH=0110111011 GOMAGIC=GOFMAHASH]
Trying go args=[...], env=[GOFMAHASH=1110111011 GOMAGIC=GOFMAHASH]
go failed (2 distinct triggers): exit status 1
Trigger string is 'GOFMAHASH triggered math.qzero:427 111111101010011110111011', repeated 6 times
Trigger string is 'GOFMAHASH triggered main.main:20 010111010000101110111011', repeated 1 times
Trying go args=[...], env=[GOFMAHASH=01110111011 GOMAGIC=GOFMAHASH]
go failed (1 distinct triggers): exit status 1
Trigger string is 'GOFMAHASH triggered main.main:20 010111010000101110111011', repeated 1 times
Review GSHS_LAST_FAIL.0.log for failing run
FINISHED, suggest this command line for debugging:
GOSSAFUNC='main.main:20 010111010000101110111011' \
GOFMAHASH=01110111011 GOMAGIC=GOFMAHASH go run fma.go
Change-Id: Ifa22dd8f1c37c18fc8a4f7c396345a364bc367d5
Reviewed-on: https://go-review.googlesource.com/c/go/+/394754
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
On some platforms, building PIE needs external linking, which
cannot run if cgo is not available.
Change-Id: I6d504aed0f0442cda0355d0beac606ad365e2046
Reviewed-on: https://go-review.googlesource.com/c/go/+/447616
Reviewed-by: Than McIntosh <thanm@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Currently in PGO we use a percentage threshold to determine if a
callsite is hot. This CL uses a different method -- treating the
hottest callsites that make up cumulatively top X% of total edge
weights as hot (X=95 for now). This default might work better for
a wider range of profiles. (The absolute threshold can still be
changed by a flag.)
For #55022.
Change-Id: I7e3b6f0c3cf23f9a89dd5994c10075b498bf14ee
Reviewed-on: https://go-review.googlesource.com/c/go/+/447016
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
`TestScripts/svn` test suite fails if the host does not have a TZ
database installed.
This CL updates those tests so SVN formats dates using UTC, which
don't require a TZ database.
Fixes#56527
Change-Id: I20f3c03c3cedd7d748f4623dddc66bd04d1df318
Reviewed-on: https://go-review.googlesource.com/c/go/+/447335
Reviewed-by: Bryan Mills <bcmills@google.com>
Run-TryBot: Quim Muntal <quimmuntal@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Auto-Submit: Bryan Mills <bcmills@google.com>
Currently, FromDir identifies a VCS checkout directory just by checking
whether it contains a specified file. This is not enough. For example,
although there is a ".git" file (a plain file, not a directory) in a
git submodule directory, this directory is not a git repository root.
This change takes the file mode into account. As of now, the filename
and file mode for the supported VCS tools are:
- Mercurial: .hg directory
- Git: .git directory
- Bazaar: .bzr directory
- Subversion: .svn directory
- Fossil: .fslckout plain file
- Fossil: _FOSSIL_ plain file
This CL effectively reverts CL 30948 for #10322.
Fixes#53640.
Change-Id: Iea316c7e983232903bddb7e7f6dbaa55e8498685
GitHub-Last-Rev: 7a2d6ff6f9
GitHub-Pull-Request: golang/go#56296
Reviewed-on: https://go-review.googlesource.com/c/go/+/443597
Auto-Submit: Bryan Mills <bcmills@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
This is an oversight from https://go-review.googlesource.com/c/go/+/419875,
where script commands were refactored and factored out to a new package.
For #27494.
Change-Id: Ie606cab39f60859ee1da5165dcc94c8470c94325
Reviewed-on: https://go-review.googlesource.com/c/go/+/447575
Run-TryBot: Quim Muntal <quimmuntal@gmail.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Bryan Mills <bcmills@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
Per discussion with Roland Shoemaker, this updates
x509.CreateRevocationList to mirror the behavior of
x509.CreateCertificate, creating an internal struct for the ASN.1
encoding of the CRL. This allows us to switch the Issuer field type to
asn1.RawValue, bypassing the round-tripping issues of pkix.Name in most
scenarios.
Per linked ticket, this resolves issues where a non-Go created
certificate can be used to create CRLs which aren't correctly attested
to that certificate. In rare cases where the CRL issuer is validated
against the certificate's issuer (such as the linked JDK example), this
can result in failing to check this CRL for the candidate certificate.
Fixes#53754
Change-Id: If0adc053c081d6fb0b1ce47324c877eb2429a51f
GitHub-Last-Rev: 033115dd5e
GitHub-Pull-Request: golang/go#53985
Reviewed-on: https://go-review.googlesource.com/c/go/+/418834
Reviewed-by: Roland Shoemaker <roland@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Run-TryBot: Roland Shoemaker <roland@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Roland Shoemaker <roland@golang.org>
Two edge cases that were mentioned in the docs are actually impossible:
* For NIST curves, ECDH can't fail, since the zero scalar is rejected
by NewPrivateKey, the identity point is rejected by NewPublicKey,
and NIST curves are a prime-order group.
Let's call the inputs to scalar multiplication k and P, and the
order of the group q. If k[P] is the identity, and also q[P] is the
identity by definition, then P's order is a divisor of q-k, because
k[P] + [q-k]P = q[P] = I
P's order is either 1 or q, and can only be a divisor of q-k if it's
1 (so P is the identity), or if k is zero.
* For X25519, PrivateKey.PublicKey can't return the all-zero value,
since no value is equivalent to zero after clamping.
Clamping unsets the lowest three bit, sets the second-to-highest
bit, and unsets the top bit; this means that a scalar equivalent to
zero needs to be a multiple of 8*q, and needs to be between 2**254
and 2**255-1, but 8*p > 2**255-1.
Tests for other exotic edge cases such as non-canonical point encodings,
clamping, points on the twist, and low-order components are covered by
x/crypto/wycheproof.
Change-Id: I731a878c58bd59aee5636211dc0f19ad8cfae9db
Reviewed-on: https://go-review.googlesource.com/c/go/+/425463
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Run-TryBot: Filippo Valsorda <filippo@golang.org>
Auto-Submit: Filippo Valsorda <filippo@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
In https://build.golang.org/log/d2eb315305bf3d513c490e7f85d56e9a016aacd2,
we observe a failure in TestPipeLookPathLeak due to an additional
descriptor (7) that was open at the start of the test being closed while
the test executes.
I haven't dug much into the failure, but it seems plausible to me that the
descriptor may have been opened by libc for some reason, and may have been
closed due to some sort of idle timeout or the completion of a background
initialization routine.
Since the test is looking for a leak, and closing an existing descriptor
does not indicate a leak, let's not fail the test if an existing descriptor
is unexpectedly closed.
Updates #5071.
Change-Id: I03973ddff6592c454cfcc790d6e56accd051dd52
Reviewed-on: https://go-review.googlesource.com/c/go/+/447235
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The -C flag is like tar -C or make -C: it changes to the named directory
early in command startup, before anything else happens.
Fixes#50332.
Change-Id: I8e4546f69044cb3a028d4d26dfba482b08cb845d
Reviewed-on: https://go-review.googlesource.com/c/go/+/421436
Reviewed-by: Bryan Mills <bcmills@google.com>
Auto-Submit: Russ Cox <rsc@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Currently, with PGO, the inliner uses node weights to decide if a
function is inlineable (with a larger budget). But the actual
inlining is determined by the weight of the call edge. There is a
discrepancy that, if a callee node is hot but the call edge is not,
it would not inlined, and marking the callee inlineable would of
no use.
Instead of using two kinds of weights, we just use the edge
weights to decide inlineability. If a function is the callee of a
hot call edge, its inlineability is determined with a larger
threshold. For a function that exceeds the regular inlining budget,
it is still inlined only when the call edge is hot, as it would
exceed the regular inlining cost for non-hot call sites, even if
it is marked inlineable.
For #55022.
Change-Id: I93fa9919fc6bcbb394e6cfe54ec96a96eede08f7
Reviewed-on: https://go-review.googlesource.com/c/go/+/447015
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
CC-BY-3.0 was shiny and new back in 2009, but CC-BY-4.0 is
generally preferred now. Update our CC-BY uses to CC-BY-4.0.
Google lawyers signed off on the overall CC-BY-4.0 update
and Renee French signed off on the update of the gopher license.
See also CL 447156.
Change-Id: I3908910d6011ed733271e595f761c773351b30f7
Reviewed-on: https://go-review.googlesource.com/c/go/+/447275
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Russ Cox <rsc@golang.org>
We don't have a formatter for these files, so check here that
they are in the right form to allow 'cat next/*.txt >go1.X.txt'
at the end of each cycle.
Fix the api files that the check finds.
Change-Id: I0c5e4ab11751c7d0afce32503131d487313f41c0
Reviewed-on: https://go-review.googlesource.com/c/go/+/431335
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Auto-Submit: Russ Cox <rsc@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
We were mishandling {{range $i = .}}, treating it as though it were
{{range $i := .}}. That happened to work if $i were the most recently
declared variable, but not otherwise.
Fixes#56490
Change-Id: I222a009d671d86c06a980a54388e05f12101c00b
Reviewed-on: https://go-review.googlesource.com/c/go/+/446795
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
