Code introduced in
[2034fbab5b]
cmd/compile: use existing instructions instead of nops for inline marks
to change a src.Pos's column to 1 accidentally reset
the is_stmt and prologue/epilogue bits, and that
turned out to cause a regression in ssa/debug_test.
Preserving that information fixed the regression.
Change-Id: I7c6859c8b68d9c6f7c0cbc8805c1f41dc5c1d5fb
Reviewed-on: https://go-review.googlesource.com/c/go/+/169739
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This addresses the failures we have seen in #31084. The correct
fix is to find the actual bug in the assembly code.
Updates #31084.
Change-Id: I437780c53d0c4423d742e2e3b650b899ce845372
Reviewed-on: https://go-review.googlesource.com/c/go/+/169721
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
ssa/debug_test.go already had a step limit; this exposes
it to individual tests, and it is then set low for the
infinite loop tests.
That however is not enough; in an infinite loop debuggers
see an unchanging line number, and therefore keep trying
until they see a different one. To do this, the concept
of a "bogus" line number is introduced, and on output
single-instruction infinite loops are detected and a
hardware nop with correct line number is inserted into
the loop; the branch itself receives a bogus line number.
This breaks up the endless stream of same line number and
causes both gdb and delve to not hang; Delve complains
about the incorrect line number while gdb does
a sort of odd step-to-nowhere that then steps back
to the loop. Since repeats are suppressed in the reference
file, a single line is shown there.
(The wrong line number mentioned in previous message
was an artifact of debug_test.go, not Delve, and is now
fixed.)
The bogus line number exposed in Delve is less than
wonderful, but compared to hanging, it is better.
Fixes#30664.
Change-Id: I30c927cf8869a84c6c9b84033ee44d7044aab552
Reviewed-on: https://go-review.googlesource.com/c/go/+/168477
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Google's 8.8.8.8 DNS server used to reports its reverse DNS name
as ending in ".google.com". Now it's "dns.google.".
Change-Id: I7dd15f03239e5c3f202e471618ab867690cb4f9d
Reviewed-on: https://go-review.googlesource.com/c/go/+/169679
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Update the issue 30908 test to work with the no-opt builder
(this requires a corresponding change in the linker as well).
As part of this change, 'rundir' tests are now linked without
passing "-w" to the linker.
Updates #30908.
Fixes#31034.
Change-Id: Ic776e1607075c295e409e1c8230aaf55a79a6323
Reviewed-on: https://go-review.googlesource.com/c/go/+/169161
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Update the recently-added '-strictdups' sanity checking to avoid
failing the link in cases where we have objects feeding into the link
with a mix of command line flags (and in particular some with "-N" and
some without). This scenario will trigger errors/warnings due to
inlinable functions and wrapper functions that have different sizes
due to presence or lack of optimization.
Update #31034.
Change-Id: I1dd9e37c2f9bea5da0ab82e32e6fc210aebf6a65
Reviewed-on: https://go-review.googlesource.com/c/go/+/169160
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Change-Id: Ia268b0d64dc89866aa09bfffcaa109741088a904
Reviewed-on: https://go-review.googlesource.com/c/go/+/169119
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 135377 introduces pass strings and slices to convT2{E,I} by value.
Before that CL, all types, except interface will be allocated temporary
address. The CL changes the logic that only constant and type which
needs address (determine by convFuncName) will be allocated.
It fails to cover the case where type is static composite literal.
Adding condition to check that case fixes the issue.
Also, static composite literal node implies constant type, so consttype
checking can be removed.
Fixes#30956
Change-Id: Ifc750a029fb4889c2d06e73e44bf85e6ef4ce881
Reviewed-on: https://go-review.googlesource.com/c/go/+/168858
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
As .init_array section aren't available on AIX, the Go runtime
initialization is made with gcc constructor attribute.
However, as cgo tool is building a binary in order to get imported
C symbols, Go symbols imported for this initilization must be ignored.
-Wl,-berok is mandatory otherwize ld will fail to create this binary,
_rt0_aix_ppc64_lib and runtime_rt0_go aren't defined in runtime/cgo.
These two symbols must also be ignored when creating _cgo_import.go.
Change-Id: Icf2e0282f5b50de5fa82007439a428e6147efef1
Reviewed-on: https://go-review.googlesource.com/c/go/+/169118
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
On AIX, shared objects must be wrapped under an archive file.
For testso, creating libcgosotest with an extern symbol isn't
AIX-friendly. By default, ld will block such behavior. Rather than
forcing ld to work as on Linux and using the run-time linking,
goCallback became a function pointer which is set by setCallback().
Updates #30565
Change-Id: I455ab32faddd41f1b0c84cc9e503788044ad49b2
Reviewed-on: https://go-review.googlesource.com/c/go/+/169020
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
WriteAt use pwrite syscall on *nix or WriteFile on Windows.
On Linux/Windows, these system calls always write to end of file in
append mode, regardless of offset parameter.
It is hard (maybe impossible) to make WriteAt work portably.
Making WriteAt returns an error if file is opened in append mode, we
guarantee to get consistent behavior between platforms, also prevent
user from accidently corrupting their data.
Fixes#30716
Change-Id: If83d935a22a29eed2ff8fe53d13d0b4798aa2b81
Reviewed-on: https://go-review.googlesource.com/c/go/+/166578
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Implemented via the underlying Int.SetUint64.
Added tests for Rat.SetInt64 and Rat.SetUint64.
Fixes#29579
Change-Id: I03faaffc93e36873b202b58ae72b139dea5c40f9
Reviewed-on: https://go-review.googlesource.com/c/go/+/160682
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
We don't use the TLS section on android, and dropping it avoids
complaints about underalignment from the Android Q linker.
Updates #29674
Change-Id: I91dabf2a58e6eb1783872639a6a144858db09cef
Reviewed-on: https://go-review.googlesource.com/c/go/+/169618
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Issue #29122 introduced a subtle regression due to the way that
TrimFuncLeft is written: previously TrimSpace returned nil when given
an input of all whitespace, but with the #29122 changes it returned an
empty slice on all-space input.
This change adds a special case to the new, optimized TrimSpace to go
back to that behavior. While it is odd behavior and people shouldn't be
relying on these functions returning a nil slice in practice, it's not
worth the breakage of code that does.
This tweak doesn't change the TrimSpace benchmarks significantly.
Fixes#31038
Change-Id: Idb495d02b474054d2b2f593c2e318a7a6625688a
Reviewed-on: https://go-review.googlesource.com/c/go/+/169518
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Now the net package is back to no longer depending on unicode. And lock that in
with a test.
Fixes#30440
Change-Id: I18b89b02f7d96488783adc07308da990f505affd
Reviewed-on: https://go-review.googlesource.com/c/go/+/169137
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Mention that .go files must be from a single directory
for them to be treated as a single package.
Fixes#21529
Change-Id: I79cb08b9f43888814b1249a7b50bc7bc70bc1c72
Reviewed-on: https://go-review.googlesource.com/c/go/+/149797
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
So the net package doesn't indirectly depend on unicode tables.
But we're still not quite there, because a new test added in this CL
reveals that we still have a path to unicode via:
deps_test.go:570:
TODO(issue 30440): policy violation: net => sort => reflect => unicode
Updates #30440
Change-Id: I710c2061dfbaa8e866c92e6c824bd8df35784165
Reviewed-on: https://go-review.googlesource.com/c/go/+/169080
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Alpine Linux uses /etc/ssl/cert.pem as default ca-bundle which
is preinstalled since 3.7 and was installed as part of the libressl
package in 3.5 and 3.6.
The path /etc/ssl/certs/ca-certificates.crt is only valid if the full
ca-certificates package is installed by hand, which contains all
single CA certs and uses update-ca-certificates to bundle them.
The priority for /etc/ssl/certs/ca-certificates.crt should be kept
higher than /etc/ssl/cert.pem in case the user installed custom
CA certs.
Change-Id: I1c86a6ad84d8ee1163560655743a5ce9f2408af1
GitHub-Last-Rev: 0ba4d599e4
GitHub-Pull-Request: golang/go#31042
Reviewed-on: https://go-review.googlesource.com/c/go/+/169238
Reviewed-by: Filippo Valsorda <filippo@golang.org>
R14, R15 must be saved in sigtramp because they might be modified by Go
code when a SIGPROF occurs.
Fixes#28555
Change-Id: I573541f108d7d6aac8e60d33c649e5db943f3ef5
Reviewed-on: https://go-review.googlesource.com/c/go/+/169117
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
It should produce equivalent results to split on the import path of the
package rather than its directory, in GOPATH mode. That means the common
code in DefaultExecName can be used.
We're in the middle of Go 1.12 cycle, so now is a good time to make it
happen for Go 1.13.
Modify isVersionElement to accept path elements like "v2", "v3", "v10",
rather than "/v2", "/v3", "/v10". Then use it in DefaultExecName instead
of the ad-hoc isVersion function. There is no change in behavior.
Add tests for DefaultExecName and isVersionElement.
Updates #26869
Change-Id: Ic6da2c92587459aa2b327385e994b72a6e183092
Reviewed-on: https://go-review.googlesource.com/c/go/+/168678
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Add more explicit checks if the given js.Value is of the correct type
instead of erroring on the JavaScript layer.
Change-Id: I30b18a76820fb68f6ac279bb88a57456f5bab467
Reviewed-on: https://go-review.googlesource.com/c/go/+/168886
Run-TryBot: Richard Musiol <neelance@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
It needs to be set before addTypeBits is called.
Fixes#31043
Change-Id: I692b4047dc17bd68202d45da41dd55d432383e59
Reviewed-on: https://go-review.googlesource.com/c/go/+/169318
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We can't use ptrdata inside of typeptrdata, because it won't be
properly initialized until typeptrdata returns.
Fixes#31039
Change-Id: Ib8c89191a7e4cce678a05d351bb6ded81ba23aae
Reviewed-on: https://go-review.googlesource.com/c/go/+/169317
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Some special-case code paths in order.go didn't expect OCALLFUNC to
have Ninit; in particular, OAS2FUNC and ODEFER/OGO failed to call
o.init on their child OCALLFUNC node. This resulted in not all of the
AST being properly ordered.
This was noticed because order is responsible for introducing an
invariant around how OAPPEND is used, which is enforced by walk.
However, there were perhaps simpler cases (e.g., simple order of
evaluation) that were being silently miscompiled.
Fixes#31010.
Change-Id: Ib928890ab5ec2aebd8e30a030bc2b404387f9123
Reviewed-on: https://go-review.googlesource.com/c/go/+/169257
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
This fixes an old oversight. Rat.SetString already permitted
fractions a/b where both a and b could independently specify
a base prefix. With this CL, it now also accepts non-decimal
floating-point numbers.
Fixes#29799.
Change-Id: I9cc65666a5cebb00f0202da2e4fc5654a02e3234
Reviewed-on: https://go-review.googlesource.com/c/go/+/168237
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
CL 168697 unconditionally set GOPATH in dist, which broke the
misc-vet-vetall builder, because cmd/vet/all depends on GOPATH.
Fixes#30971
Change-Id: If6a58e054c6a4fedc2ea506a2c443348489c91f3
Reviewed-on: https://go-review.googlesource.com/c/go/+/169217
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
We already have the ptrdata field in a type, which encodes exactly
the same information that kindNoPointers does.
My problem with kindNoPointers is that it often leads to
double-negative code like:
t.kind & kindNoPointers != 0
Much clearer is:
t.ptrdata == 0
Update #27167
Change-Id: I92307d7f018a6bbe3daca4a4abb4225e359349b1
Reviewed-on: https://go-review.googlesource.com/c/go/+/169157
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Since GO111MODULE=on by default, the Go command needs a location for
the module cache, even though it doesn't need to be written when
building std and cmd. If GOROOT is checked out to $HOME/go, which is
also the default location for GOPATH, this causes unnecessary problems
late in the build.
With this change, dist sets GOPATH to $GOROOT/pkg/obj/go-path. This is
next to the temporary GOCACHE, $GOROOT/pkg/obj/go-build.
Fixes#30960
Change-Id: I60771ee7f7c67ced1d2dc7c66b5885703fad1b63
Reviewed-on: https://go-review.googlesource.com/c/go/+/168697
Run-TryBot: Jay Conrod <jayconrod@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Instrumenting make.bash reveals that almost half (49.54%)
of the >16 million calls to growslice for
pointer-containing slices are
growing from an empty to a non-empty slice.
In that case, there is no need to call the write barrier,
which does some work before discovering that no pointers need shading.
Change-Id: Ide741468d8dee7ad43ea0bfbea6ccdf680030a0f
Reviewed-on: https://go-review.googlesource.com/c/go/+/168959
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Instead of always inserting a nop to use as the target of an inline
mark, see if we can instead find an instruction we're issuing anyway
with the correct line number, and use that instruction. That way, we
don't need to issue a nop.
Makes cmd/go 0.3% smaller.
Update #29571
Change-Id: If6cfc93ab3352ec2c6e0878f8074a3bf0786b2f8
Reviewed-on: https://go-review.googlesource.com/c/go/+/158021
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Make context depend on reflectlite instead of reflect in effort to
eventually make net no longer depend on unicode tables.
With this CL we're down to just:
net -> context -> fmt -> unicode tables
The next CL can remove context -> fmt.
Updates #30440
Change-Id: I7f5df15f975d9dc862c59aa8477c1cfd6ff4967e
Reviewed-on: https://go-review.googlesource.com/c/go/+/164239
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
New test case designed to mimic the code in issue 30908, which
features duplicate but non-indentical DWARF abstract subprogram DIEs.
Updates #30908.
Change-Id: Iacb4b53e6a988e46c801cdac236cef883c553f8f
Reviewed-on: https://go-review.googlesource.com/c/go/+/168957
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
For "rundir" tests, allow users to add in linker flags as well as
compiler flags, e.g.
// rundir -m -ldflags -w
The directive above will pass "-m" to the compiler on each package compilation
and "-w" to the linker for the final link.
In addition, if "-P" is specified with 'rundir', then for each compile
pass in "-p <X>" to set the packagepath explicitly, which is closer to
how the compiler is run by 'go build'.
Change-Id: I04720011a89d1bd8dcb4f2ccb4af1d74f6a01da1
Reviewed-on: https://go-review.googlesource.com/c/go/+/168977
Reviewed-by: Cherry Zhang <cherryyz@google.com>
When generating DWARF inline info records, the post-SSA code looks
through the original "pre-inline" dcl list for the function so as to
handle situations where formal params are promoted or optimized away.
This code was not properly handling the case where an output parameter
was promoted to the heap -- in this case the param node is converted
in place from class PPARAMOUT to class PAUTOHEAP. This caused
inconsistencies later on, since the variable entry in the abstract
subprogram DIE wound up as a local and not an output parameter.
Fixes#30908.
Change-Id: Ia70b89f0cf7f9b16246d95df17ad6e307228b8c7
Reviewed-on: https://go-review.googlesource.com/c/go/+/168818
Reviewed-by: Cherry Zhang <cherryyz@google.com>
go_js_wasm_exec was returning with code 0 if WebAssembly.instantiate
failed. This made failing tests show as passed.
Change-Id: Icfb2f42e9f1c3c70ca4a130a61a63cb305edff32
Reviewed-on: https://go-review.googlesource.com/c/go/+/168885
Run-TryBot: Richard Musiol <neelance@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Some WebAssembly runtimes (e.g. Node.js) fail to load a wasm binary if
it has more than 100000 data segments. Do not skip zero regions any more
if the limit was reached.
Change-Id: I14c4c2aba142d1d2b887bce6d03b8c1c1746c5ec
Reviewed-on: https://go-review.googlesource.com/c/go/+/168884
Run-TryBot: Richard Musiol <neelance@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
