Its sole use is in walk.go. 100% code movement.
gsubr.go increasingly contains backend-y things.
With a few more relocations, it could probably be
fruitfully renamed progs.go.
Change-Id: I61ec5c2bc1f8cfdda64c6d6f580952c154ff60e0
Reviewed-on: https://go-review.googlesource.com/41972
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
They were used only in esc.go. 100% code movement.
Also, remove the rather outdated comment at the top of gen.go.
It's not really clear what gen.go is for any more.
Change-Id: Iaedfe7015ef6f5c11c49f3e6721b15d779a00faa
Reviewed-on: https://go-review.googlesource.com/41971
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When a constant doesn't fit in a single instruction, use two
paired instructions instead of the constant pool. For example
ADD $0xaa00bb, R0, R1
Used to rewrite to:
MOV ?(IP), R11
ADD R11, R0, R1
Instead, do:
ADD $0xaa0000, R0, R1
ADD $0xbb, R1, R1
Same number of instructions.
Good:
4 less bytes (no constant pool entry)
One less load.
Bad:
Critical path is one instruction longer.
It's probably worth it to avoid the loads, they are expensive.
Dave Cheney got us some performance numbers: https://perf.golang.org/search?q=upload:20170426.1
TL;DR mean 1.37% improvement.
Change-Id: Ib206836161fdc94a3962db6f9caa635c87d57cf1
Reviewed-on: https://go-review.googlesource.com/41612
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The "lldb start" phase often times out on the iOS builder. Increase
the timeout and see if that helps.
Change-Id: I92fd67cbfa90659600e713198d6b2c5c78dde20f
Reviewed-on: https://go-review.googlesource.com/41863
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The current code treats condition as special register and write
its raw data directly into instruction.
The fix converts the raw data into correct condition encoding.
Also fix the operand catogery of FCCMP.
Add tests to cover all cases.
Change-Id: Ib194041bd9017dd0edbc241564fe983082ac616b
Reviewed-on: https://go-review.googlesource.com/41511
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Previously, the package did not distinguish between baseline and
extended sequential images. Both are non-progressive images, but the Th
range differs between the two, as per Annex B of
https://www.w3.org/Graphics/JPEG/itu-t81.pdf
Extended sequential images are often emitted by the Guetzli encoder.
Fixes#19913
Change-Id: I3d0f9e16d5d374ee1c65e3a8fb87519de61cff94
Reviewed-on: https://go-review.googlesource.com/41831
Reviewed-by: David Symonds <dsymonds@golang.org>
When using a concurrent backend,
the overall compilation time is bounded
in part by the slowest function to compile.
The number of top-level statements in a function
is an easily calculated and fairly reliable
proxy for compilation time.
Here's a standard compilecmp output for -c=8 with this CL:
name old time/op new time/op delta
Template 127ms ± 4% 125ms ± 6% -1.33% (p=0.000 n=47+50)
Unicode 84.8ms ± 4% 84.5ms ± 4% ~ (p=0.217 n=49+49)
GoTypes 289ms ± 3% 287ms ± 3% -0.78% (p=0.002 n=48+50)
Compiler 1.36s ± 3% 1.34s ± 2% -1.29% (p=0.000 n=49+47)
SSA 2.95s ± 3% 2.77s ± 4% -6.23% (p=0.000 n=50+49)
Flate 70.7ms ± 3% 70.9ms ± 2% ~ (p=0.112 n=50+49)
GoParser 85.0ms ± 3% 83.0ms ± 4% -2.31% (p=0.000 n=48+49)
Reflect 229ms ± 3% 225ms ± 4% -1.83% (p=0.000 n=49+49)
Tar 70.2ms ± 3% 69.4ms ± 3% -1.17% (p=0.000 n=49+49)
XML 115ms ± 7% 114ms ± 6% ~ (p=0.158 n=49+47)
name old user-time/op new user-time/op delta
Template 352ms ± 5% 342ms ± 8% -2.74% (p=0.000 n=49+50)
Unicode 117ms ± 5% 118ms ± 4% +0.88% (p=0.005 n=46+48)
GoTypes 986ms ± 3% 980ms ± 4% ~ (p=0.110 n=46+48)
Compiler 4.39s ± 2% 4.43s ± 4% +0.97% (p=0.002 n=50+50)
SSA 12.0s ± 2% 13.3s ± 3% +11.33% (p=0.000 n=49+49)
Flate 222ms ± 5% 219ms ± 6% -1.56% (p=0.002 n=50+50)
GoParser 271ms ± 5% 268ms ± 4% -0.83% (p=0.036 n=49+48)
Reflect 560ms ± 4% 571ms ± 3% +1.90% (p=0.000 n=50+49)
Tar 183ms ± 3% 183ms ± 3% ~ (p=0.903 n=45+50)
XML 364ms ±13% 391ms ± 4% +7.16% (p=0.000 n=50+40)
A more interesting way of viewing the data is by
looking at the ratio of the time taken to compile
the slowest-to-compile function to the overall
time spent compiling functions.
If this ratio is small (near 0), then increased concurrency might help.
If this ratio is big (near 1), then we're bounded by that single function.
I instrumented the compiler to emit this ratio per-package,
ran 'go build -a -gcflags=-c=C -p=P std cmd' three times,
for varying values of C and P,
and collected the ratios encountered into an ASCII histogram.
Here's c=1 p=1, which is a non-concurrent backend, single process at a time:
90%|
80%|
70%|
60%|
50%|
40%|
30%|
20%|**
10%|***
0%|*********
----+----------
|0123456789
The x-axis is floor(10*ratio), so the first column indicates the percent of
ratios that fell in the 0% to 9.9999% range.
We can see in this histogram that more concurrency will help;
in most cases, the ratio is small.
Here's c=8 p=1, before this CL:
90%|
80%|
70%|
60%|
50%|
40%|
30%| *
20%| *
10%|* * *
0%|**********
----+----------
|0123456789
In 30-40% of cases, we're mostly bound by the compilation time
of a single function.
Here's c=8 p=1, after this CL:
90%|
80%|
70%|
60%|
50%| *
40%| *
30%| *
20%| *
10%| *
0%|**********
----+----------
|0123456789
The sorting pays off; we are bound by the
compilation time of a single function in over half of packages.
The single * in the histogram indicates 0-10%.
The actual values for this chart are:
0: 5%, 1: 1%, 2: 1%, 3: 4%, 4: 5%, 5: 7%, 6: 7%, 7: 7%, 8: 9%, 9: 55%
This indicates that efforts to increase or enable more concurrency,
e.g. by optimizing mutexes or increasing the value of c,
will probably not yield fruit.
That matches what compilecmp tells us.
Further optimization efforts should thus focus instead on one of:
(1) making more functions compile concurrently
(2) improving the compilation time of the slowest functions
(3) speeding up the remaining serial parts of the compiler
(4) automatically splitting up some large autogenerated functions
into small ones, as discussed in #19751
I hope to spend more time on (1) before the freeze.
Adding process parallelism doesn't change the story much.
For example, here's c=8 p=8, after this CL:
90%|
80%|
70%|
60%|
50%|
40%| *
30%| *
20%| *
10%| ***
0%|**********
----+----------
|0123456789
Since we don't need to worry much about p,
these histograms can help us select a good
general value of c to use as a default,
assuming we're not bounded by GOMAXPROCS.
Here are some charts after this CL, for c from 1 to 8:
c=1 p=1
90%|
80%|
70%|
60%|
50%|
40%|
30%|
20%|**
10%|***
0%|*********
----+----------
|0123456789
c=2 p=1
90%|
80%|
70%|
60%|
50%|
40%|
30%|
20%|
10%| **** *
0%|**********
----+----------
|0123456789
c=3 p=1
90%|
80%|
70%|
60%|
50%|
40%|
30%|
20%| *
10%| ** * *
0%|**********
----+----------
|0123456789
c=4 p=1
90%|
80%|
70%|
60%|
50%|
40%|
30%| *
20%| *
10%| * *
0%|**********
----+----------
|0123456789
c=5 p=1
90%|
80%|
70%|
60%|
50%|
40%|
30%| *
20%| *
10%| * *
0%|**********
----+----------
|0123456789
c=6 p=1
90%|
80%|
70%|
60%|
50%|
40%| *
30%| *
20%| *
10%| *
0%|**********
----+----------
|0123456789
c=7 p=1
90%|
80%|
70%|
60%|
50%| *
40%| *
30%| *
20%| *
10%| **
0%|**********
----+----------
|0123456789
c=8 p=1
90%|
80%|
70%|
60%|
50%| *
40%| *
30%| *
20%| *
10%| *
0%|**********
----+----------
|0123456789
Given the increased user-CPU costs as
c increases, it looks like c=4 is probably
the sweet spot, at least for now.
Pleasingly, this matches (and explains)
the results of the standard benchmarking
that I have done.
Updates #15756
Change-Id: I82b606c06efd34a5dbd1afdbcf66a605905b2aeb
Reviewed-on: https://go-review.googlesource.com/41192
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This CL adds initial support for concurrent backend compilation.
BACKGROUND
The compiler currently consists (very roughly) of the following phases:
1. Initialization.
2. Lexing and parsing into the cmd/compile/internal/syntax AST.
3. Translation into the cmd/compile/internal/gc AST.
4. Some gc AST passes: typechecking, escape analysis, inlining,
closure handling, expression evaluation ordering (order.go),
and some lowering and optimization (walk.go).
5. Translation into the cmd/compile/internal/ssa SSA form.
6. Optimization and lowering of SSA form.
7. Translation from SSA form to assembler instructions.
8. Translation from assembler instructions to machine code.
9. Writing lots of output: machine code, DWARF symbols,
type and reflection info, export data.
Phase 2 was already concurrent as of Go 1.8.
Phase 3 is planned for eventual removal;
we hope to go straight from syntax AST to SSA.
Phases 5–8 are per-function; this CL adds support for
processing multiple functions concurrently.
The slowest phases in the compiler are 5 and 6,
so this offers the opportunity for some good speed-ups.
Unfortunately, it's not quite that straightforward.
In the current compiler, the latter parts of phase 4
(order, walk) are done function-at-a-time as needed.
Making order and walk concurrency-safe proved hard,
and they're not particularly slow, so there wasn't much reward.
To enable phases 5–8 to be done concurrently,
when concurrent backend compilation is requested,
we complete phase 4 for all functions
before starting later phases for any functions.
Also, in reality, we automatically generate new
functions in phase 9, such as method wrappers
and equality and has routines.
Those new functions then go through phases 4–8.
This CL disables concurrent backend compilation
after the first, big, user-provided batch of
functions has been compiled.
This is done to keep things simple,
and because the autogenerated functions
tend to be small, few, simple, and fast to compile.
USAGE
Concurrent backend compilation still defaults to off.
To set the number of functions that may be backend-compiled
concurrently, use the compiler flag -c.
In future work, cmd/go will automatically set -c.
Furthermore, this CL has been intentionally written
so that the c=1 path has no backend concurrency whatsoever,
not even spawning any goroutines.
This helps ensure that, should problems arise
late in the development cycle,
we can simply have cmd/go set c=1 always,
and revert to the original compiler behavior.
MUTEXES
Most of the work required to make concurrent backend
compilation safe has occurred over the past month.
This CL adds a handful of mutexes to get the rest of the way there;
they are the mutexes that I didn't see a clean way to avoid.
Some of them may still be eliminable in future work.
In no particular order:
* gc.funcsymsmu. The global funcsyms slice is populated
lazily when we need function symbols for closures.
This occurs during gc AST to SSA translation.
The function funcsym also does a package lookup,
which is a source of races on types.Pkg.Syms;
funcsymsmu also covers that package lookup.
This mutex is low priority: it adds a single global,
it is in an infrequently used code path, and it is low contention.
Since funcsyms may now be added in any order,
we must sort them to preserve reproducible builds.
* gc.largeStackFramesMu. We don't discover until after SSA compilation
that a function's stack frame is gigantic.
Recording that error happens basically never,
but it does happen concurrently.
Fix with a low priority mutex and sorting.
* obj.Link.hashmu. ctxt.hash stores the mapping from
types.Syms (compiler symbols) to obj.LSyms (linker symbols).
It is accessed fairly heavily through all the phases.
This is the only heavily contended mutex.
* gc.signatlistmu. The global signatlist map is
populated with types through several of the concurrent phases,
including notably via ngotype during DWARF generation.
It is low priority for removal.
* gc.typepkgmu. Looking up symbols in the types package
happens a fair amount during backend compilation
and DWARF generation, particularly via ngotype.
This mutex helps us to avoid a broader mutex on types.Pkg.Syms.
It has low-to-moderate contention.
* types.internedStringsmu. gc AST to SSA conversion and
some SSA work introduce new autotmps.
Those autotmps have their names interned to reduce allocations.
That interning requires protecting types.internedStrings.
The autotmp names are heavily re-used, and the mutex
overhead and contention here are low, so it is probably
a worthwhile performance optimization to keep this mutex.
TESTING
I have been testing this code locally by running
'go install -race cmd/compile'
and then doing
'go build -a -gcflags=-c=128 std cmd'
for all architectures and a variety of compiler flags.
This obviously needs to be made part of the builders,
but it is too expensive to make part of all.bash.
I have filed #19962 for this.
REPRODUCIBLE BUILDS
This version of the compiler generates reproducible builds.
Testing reproducible builds also needs automation, however,
and is also too expensive for all.bash.
This is #19961.
Also of note is that some of the compiler flags used by 'toolstash -cmp'
are currently incompatible with concurrent backend compilation.
They still work fine with c=1.
Time will tell whether this is a problem.
NEXT STEPS
* Continue to find and fix races and bugs,
using a combination of code inspection, fuzzing,
and hopefully some community experimentation.
I do not know of any outstanding races,
but there probably are some.
* Improve testing.
* Improve performance, for many values of c.
* Integrate with cmd/go and fine tune.
* Support concurrent compilation with the -race flag.
It is a sad irony that it does not yet work.
* Minor code cleanup that has been deferred during
the last month due to uncertainty about the
ultimate shape of this CL.
PERFORMANCE
Here's the buried lede, at last. :)
All benchmarks are from my 8 core 2.9 GHz Intel Core i7 darwin/amd64 laptop.
First, going from tip to this CL with c=1 has almost no impact.
name old time/op new time/op delta
Template 195ms ± 3% 194ms ± 5% ~ (p=0.370 n=30+29)
Unicode 86.6ms ± 3% 87.0ms ± 7% ~ (p=0.958 n=29+30)
GoTypes 548ms ± 3% 555ms ± 4% +1.35% (p=0.001 n=30+28)
Compiler 2.51s ± 2% 2.54s ± 2% +1.17% (p=0.000 n=28+30)
SSA 5.16s ± 3% 5.16s ± 2% ~ (p=0.910 n=30+29)
Flate 124ms ± 5% 124ms ± 4% ~ (p=0.947 n=30+30)
GoParser 146ms ± 3% 146ms ± 3% ~ (p=0.150 n=29+28)
Reflect 354ms ± 3% 352ms ± 4% ~ (p=0.096 n=29+29)
Tar 107ms ± 5% 106ms ± 3% ~ (p=0.370 n=30+29)
XML 200ms ± 4% 201ms ± 4% ~ (p=0.313 n=29+28)
[Geo mean] 332ms 333ms +0.10%
name old user-time/op new user-time/op delta
Template 227ms ± 5% 225ms ± 5% ~ (p=0.457 n=28+27)
Unicode 109ms ± 4% 109ms ± 5% ~ (p=0.758 n=29+29)
GoTypes 713ms ± 4% 721ms ± 5% ~ (p=0.051 n=30+29)
Compiler 3.36s ± 2% 3.38s ± 3% ~ (p=0.146 n=30+30)
SSA 7.46s ± 3% 7.47s ± 3% ~ (p=0.804 n=30+29)
Flate 146ms ± 7% 147ms ± 3% ~ (p=0.833 n=29+27)
GoParser 179ms ± 5% 179ms ± 5% ~ (p=0.866 n=30+30)
Reflect 431ms ± 4% 429ms ± 4% ~ (p=0.593 n=29+30)
Tar 124ms ± 5% 123ms ± 5% ~ (p=0.140 n=29+29)
XML 243ms ± 4% 242ms ± 7% ~ (p=0.404 n=29+29)
[Geo mean] 415ms 415ms +0.02%
name old obj-bytes new obj-bytes delta
Template 382k ± 0% 382k ± 0% ~ (all equal)
Unicode 203k ± 0% 203k ± 0% ~ (all equal)
GoTypes 1.18M ± 0% 1.18M ± 0% ~ (all equal)
Compiler 3.98M ± 0% 3.98M ± 0% ~ (all equal)
SSA 8.28M ± 0% 8.28M ± 0% ~ (all equal)
Flate 230k ± 0% 230k ± 0% ~ (all equal)
GoParser 287k ± 0% 287k ± 0% ~ (all equal)
Reflect 1.00M ± 0% 1.00M ± 0% ~ (all equal)
Tar 190k ± 0% 190k ± 0% ~ (all equal)
XML 416k ± 0% 416k ± 0% ~ (all equal)
[Geo mean] 660k 660k +0.00%
Comparing this CL to itself, from c=1 to c=2
improves real times 20-30%, costs 5-10% more CPU time,
and adds about 2% alloc.
The allocation increase comes from allocating more ssa.Caches.
name old time/op new time/op delta
Template 202ms ± 3% 149ms ± 3% -26.15% (p=0.000 n=49+49)
Unicode 87.4ms ± 4% 84.2ms ± 3% -3.68% (p=0.000 n=48+48)
GoTypes 560ms ± 2% 398ms ± 2% -28.96% (p=0.000 n=49+49)
Compiler 2.46s ± 3% 1.76s ± 2% -28.61% (p=0.000 n=48+46)
SSA 6.17s ± 2% 4.04s ± 1% -34.52% (p=0.000 n=49+49)
Flate 126ms ± 3% 92ms ± 2% -26.81% (p=0.000 n=49+48)
GoParser 148ms ± 4% 107ms ± 2% -27.78% (p=0.000 n=49+48)
Reflect 361ms ± 3% 281ms ± 3% -22.10% (p=0.000 n=49+49)
Tar 109ms ± 4% 86ms ± 3% -20.81% (p=0.000 n=49+47)
XML 204ms ± 3% 144ms ± 2% -29.53% (p=0.000 n=48+45)
name old user-time/op new user-time/op delta
Template 246ms ± 9% 246ms ± 4% ~ (p=0.401 n=50+48)
Unicode 109ms ± 4% 111ms ± 4% +1.47% (p=0.000 n=44+50)
GoTypes 728ms ± 3% 765ms ± 3% +5.04% (p=0.000 n=46+50)
Compiler 3.33s ± 3% 3.41s ± 2% +2.31% (p=0.000 n=49+48)
SSA 8.52s ± 2% 9.11s ± 2% +6.93% (p=0.000 n=49+47)
Flate 149ms ± 4% 161ms ± 3% +8.13% (p=0.000 n=50+47)
GoParser 181ms ± 5% 192ms ± 2% +6.40% (p=0.000 n=49+46)
Reflect 452ms ± 9% 474ms ± 2% +4.99% (p=0.000 n=50+48)
Tar 126ms ± 6% 136ms ± 4% +7.95% (p=0.000 n=50+49)
XML 247ms ± 5% 264ms ± 3% +6.94% (p=0.000 n=48+50)
name old alloc/op new alloc/op delta
Template 38.8MB ± 0% 39.3MB ± 0% +1.48% (p=0.008 n=5+5)
Unicode 29.8MB ± 0% 30.2MB ± 0% +1.19% (p=0.008 n=5+5)
GoTypes 113MB ± 0% 114MB ± 0% +0.69% (p=0.008 n=5+5)
Compiler 443MB ± 0% 447MB ± 0% +0.95% (p=0.008 n=5+5)
SSA 1.25GB ± 0% 1.26GB ± 0% +0.89% (p=0.008 n=5+5)
Flate 25.3MB ± 0% 25.9MB ± 1% +2.35% (p=0.008 n=5+5)
GoParser 31.7MB ± 0% 32.2MB ± 0% +1.59% (p=0.008 n=5+5)
Reflect 78.2MB ± 0% 78.9MB ± 0% +0.91% (p=0.008 n=5+5)
Tar 26.6MB ± 0% 27.0MB ± 0% +1.80% (p=0.008 n=5+5)
XML 42.4MB ± 0% 43.4MB ± 0% +2.35% (p=0.008 n=5+5)
name old allocs/op new allocs/op delta
Template 379k ± 0% 378k ± 0% ~ (p=0.421 n=5+5)
Unicode 322k ± 0% 321k ± 0% ~ (p=0.222 n=5+5)
GoTypes 1.14M ± 0% 1.14M ± 0% ~ (p=0.548 n=5+5)
Compiler 4.12M ± 0% 4.11M ± 0% -0.14% (p=0.032 n=5+5)
SSA 9.72M ± 0% 9.72M ± 0% ~ (p=0.421 n=5+5)
Flate 234k ± 1% 234k ± 0% ~ (p=0.421 n=5+5)
GoParser 316k ± 1% 315k ± 0% ~ (p=0.222 n=5+5)
Reflect 980k ± 0% 979k ± 0% ~ (p=0.095 n=5+5)
Tar 249k ± 1% 249k ± 1% ~ (p=0.841 n=5+5)
XML 392k ± 0% 391k ± 0% ~ (p=0.095 n=5+5)
From c=1 to c=4, real time is down ~40%, CPU usage up 10-20%, alloc up ~5%:
name old time/op new time/op delta
Template 203ms ± 3% 131ms ± 5% -35.45% (p=0.000 n=50+50)
Unicode 87.2ms ± 4% 84.1ms ± 2% -3.61% (p=0.000 n=48+47)
GoTypes 560ms ± 4% 310ms ± 2% -44.65% (p=0.000 n=50+49)
Compiler 2.47s ± 3% 1.41s ± 2% -43.10% (p=0.000 n=50+46)
SSA 6.17s ± 2% 3.20s ± 2% -48.06% (p=0.000 n=49+49)
Flate 126ms ± 4% 74ms ± 2% -41.06% (p=0.000 n=49+48)
GoParser 148ms ± 4% 89ms ± 3% -39.97% (p=0.000 n=49+50)
Reflect 360ms ± 3% 242ms ± 3% -32.81% (p=0.000 n=49+49)
Tar 108ms ± 4% 73ms ± 4% -32.48% (p=0.000 n=50+49)
XML 203ms ± 3% 119ms ± 3% -41.56% (p=0.000 n=49+48)
name old user-time/op new user-time/op delta
Template 246ms ± 9% 287ms ± 9% +16.98% (p=0.000 n=50+50)
Unicode 109ms ± 4% 118ms ± 5% +7.56% (p=0.000 n=46+50)
GoTypes 735ms ± 4% 806ms ± 2% +9.62% (p=0.000 n=50+50)
Compiler 3.34s ± 4% 3.56s ± 2% +6.78% (p=0.000 n=49+49)
SSA 8.54s ± 3% 10.04s ± 3% +17.55% (p=0.000 n=50+50)
Flate 149ms ± 6% 176ms ± 3% +17.82% (p=0.000 n=50+48)
GoParser 181ms ± 5% 213ms ± 3% +17.47% (p=0.000 n=50+50)
Reflect 453ms ± 6% 499ms ± 2% +10.11% (p=0.000 n=50+48)
Tar 126ms ± 5% 149ms ±11% +18.76% (p=0.000 n=50+50)
XML 246ms ± 5% 287ms ± 4% +16.53% (p=0.000 n=49+50)
name old alloc/op new alloc/op delta
Template 38.8MB ± 0% 40.4MB ± 0% +4.21% (p=0.008 n=5+5)
Unicode 29.8MB ± 0% 30.9MB ± 0% +3.68% (p=0.008 n=5+5)
GoTypes 113MB ± 0% 116MB ± 0% +2.71% (p=0.008 n=5+5)
Compiler 443MB ± 0% 455MB ± 0% +2.75% (p=0.008 n=5+5)
SSA 1.25GB ± 0% 1.27GB ± 0% +1.84% (p=0.008 n=5+5)
Flate 25.3MB ± 0% 26.9MB ± 1% +6.31% (p=0.008 n=5+5)
GoParser 31.7MB ± 0% 33.2MB ± 0% +4.61% (p=0.008 n=5+5)
Reflect 78.2MB ± 0% 80.2MB ± 0% +2.53% (p=0.008 n=5+5)
Tar 26.6MB ± 0% 27.9MB ± 0% +5.19% (p=0.008 n=5+5)
XML 42.4MB ± 0% 44.6MB ± 0% +5.20% (p=0.008 n=5+5)
name old allocs/op new allocs/op delta
Template 380k ± 0% 379k ± 0% -0.39% (p=0.032 n=5+5)
Unicode 321k ± 0% 321k ± 0% ~ (p=0.841 n=5+5)
GoTypes 1.14M ± 0% 1.14M ± 0% ~ (p=0.421 n=5+5)
Compiler 4.12M ± 0% 4.14M ± 0% +0.52% (p=0.008 n=5+5)
SSA 9.72M ± 0% 9.76M ± 0% +0.37% (p=0.008 n=5+5)
Flate 234k ± 1% 234k ± 1% ~ (p=0.690 n=5+5)
GoParser 316k ± 0% 317k ± 1% ~ (p=0.841 n=5+5)
Reflect 981k ± 0% 981k ± 0% ~ (p=1.000 n=5+5)
Tar 250k ± 0% 249k ± 1% ~ (p=0.151 n=5+5)
XML 393k ± 0% 392k ± 0% ~ (p=0.056 n=5+5)
Going beyond c=4 on my machine tends to increase CPU time and allocs
without impacting real time.
The CPU time numbers matter, because when there are many concurrent
compilation processes, that will impact the overall throughput.
The numbers above are in many ways the best case scenario;
we can take full advantage of all cores.
Fortunately, the most common compilation scenario is incremental
re-compilation of a single package during a build/test cycle.
Updates #15756
Change-Id: I6725558ca2069edec0ac5b0d1683105a9fff6bea
Reviewed-on: https://go-review.googlesource.com/40693
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When using Lstat against symlinks that point to a directory,
the function returns FileInfo with both ModeDir and ModeSymlink set.
Change that to never set ModeDir if ModeSymlink is set.
Fixes#10424Fixes#17540Fixes#17541
Change-Id: Iba280888aad108360b8c1f18180a24493fe7ad2b
Reviewed-on: https://go-review.googlesource.com/41830
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Taken from the Intel Software Development Manual (of course, in the line
below it's ADC DST, SRC; The opposite of the commit subject).
12 /r ADC r8, r/m8
We need 0x12 for the corresponding ytab line, not 0x10.
{Ymb, Ynone, Yrb, Zm_r, 1},
Updates #14069
Change-Id: Id37cbd0c581c9988c2de355efa908956278e2189
Reviewed-on: https://go-review.googlesource.com/41857
Reviewed-by: Keith Randall <khr@golang.org>
Delete old TestRuntimeFunctionTrimming, which is testing a dead API
and is now handled in end-to-end tests.
Change-Id: I64fc2991ed4a7690456356b5f6b546f36935bb67
Reviewed-on: https://go-review.googlesource.com/41815
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
This is a direct port of the version from
commit a60ad46e0ed33d02e09bda439efaf9c9727dbc6c
(https://go-review.googlesource.com/c/37342/).
updates #17973
updates #18177
Change-Id: I63fa5ef6951b1edd39f84927d1181a4df9b15385
Reviewed-on: https://go-review.googlesource.com/36617
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Follow-up to review comments on CL 41797.
Mask the input to set2 and set3, so that at the very least,
we won't corrupt the rest of the flags in case of a bad input.
It also seems more semantically appropriate.
Do minor cleanup in addrescapes. I started on larger cleanup,
but it wasn't clear that it was an improvement.
Add warning comments and sanity checks to Initorder and Class constants,
to attempt to prevent them from overflowing their allotted flag bits.
Passes toolstash-check.
Change-Id: I57b9661ba36f56406aa7a1d8da9b7c70338f9119
Reviewed-on: https://go-review.googlesource.com/41817
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When the stack register is decremented to acquire stack space at
the beginning of a function, a MOVDU should be used so it is done
atomically, unless the size of the stack frame is too large for
that instruction. The code to determine whether to use MOVDU
or MOVD was checking if the function was a leaf and always generating MOVD
when it was. The choice of MOVD vs. MOVDU should only depend on the stack
frame size. This fixes that problem.
Change-Id: I0e49c79036f1e8f7584179e1442b938fc6da085f
Reviewed-on: https://go-review.googlesource.com/41813
Reviewed-by: Michael Munday <munday@ca.ibm.com>
In many cases the records returned by Reader.Read will only be used between calls
to Read and become garbage once a new record is read. In this case, instead of
allocating a new slice on each call to Read, we can reuse the last allocated slice
for successive calls to avoid unnecessary allocations.
This change adds a new field ReuseRecord to the Reader struct to enable this reuse.
ReuseRecord is false by default to avoid breaking existing code which dependss on
the current behaviour.
I also added 4 new benchmarks, corresponding to the existing Read benchmarks, which
set ReuseRecord to true.
Benchstat on my local machine (old is ReuseRecord = false, new is ReuseRecord = true)
name old time/op new time/op delta
Read-8 2.75µs ± 2% 1.88µs ± 1% -31.52% (p=0.000 n=14+15)
ReadWithFieldsPerRecord-8 2.75µs ± 0% 1.89µs ± 1% -31.43% (p=0.000 n=13+13)
ReadWithoutFieldsPerRecord-8 2.77µs ± 1% 1.88µs ± 1% -32.06% (p=0.000 n=15+15)
ReadLargeFields-8 55.4µs ± 1% 54.2µs ± 0% -2.07% (p=0.000 n=15+14)
name old alloc/op new alloc/op delta
Read-8 664B ± 0% 24B ± 0% -96.39% (p=0.000 n=15+15)
ReadWithFieldsPerRecord-8 664B ± 0% 24B ± 0% -96.39% (p=0.000 n=15+15)
ReadWithoutFieldsPerRecord-8 664B ± 0% 24B ± 0% -96.39% (p=0.000 n=15+15)
ReadLargeFields-8 3.94kB ± 0% 2.98kB ± 0% -24.39% (p=0.000 n=15+15)
name old allocs/op new allocs/op delta
Read-8 18.0 ± 0% 8.0 ± 0% -55.56% (p=0.000 n=15+15)
ReadWithFieldsPerRecord-8 18.0 ± 0% 8.0 ± 0% -55.56% (p=0.000 n=15+15)
ReadWithoutFieldsPerRecord-8 18.0 ± 0% 8.0 ± 0% -55.56% (p=0.000 n=15+15)
ReadLargeFields-8 24.0 ± 0% 12.0 ± 0% -50.00% (p=0.000 n=15+15)
Fixes#19721
Change-Id: I79b14128bb9bb3465f53f40f93b1b528a9da6f58
Reviewed-on: https://go-review.googlesource.com/41730
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Some large testing/build systems require some form of test discovery before
running tests. This usually allows for analytics, history, and stats on a per
tests basis. Typically these systems are meant used in multi-language
environments and the original source code is not known or available.
This adds a -test.list option which takes a regular expression as an
argument. Any tests, benchmarks, or examples that match that regular
expression will be printed, one per line, to stdout and then the program
will exit.
Since subtests are named/discovered at run time this will only show
top-level tests names and is a known limitation.
Fixes#17209
Change-Id: I7e607f5f4f084d623a1cae88a1f70e7d92b7f13e
Reviewed-on: https://go-review.googlesource.com/41195
Reviewed-by: Marcel van Lohuizen <mpvl@golang.org>
Run-TryBot: Marcel van Lohuizen <mpvl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The Context definition to date has not defined what Err returns
before the Done channel is closed. Define that it returns nil,
as most implementations do.
All the standard context implementations (those in package
context and in golang.org/x/net/context) return Err() == nil
when Done is not yet closed. However, some non-standard
implementations may exist that return Err() != nil in this case,
as permitted by the Context definition before this date.
Call these "errorful implementations".
Because all the standard context implementations ensure that
Err() == nil when Done is not yet closed, clients now exist that
assume Err() != nil implies Done is closed and use calling Err
as a quick short-circuit check instead of first doing a non-blocking
receive from Done and then, if that succeeds, needing to call Err.
This assumption holds for all the standard Context implementations,
so these clients work fine in practice, even though they are making
unwarranted assumptions about the Context implementations.
Call these "technically incorrect clients".
If a technically incorrect client encounters an errorful
implementation, the client misbehaves. Because there are few
errorful implementations, over time we expect that many clients
will end up being technically incorrect without realizing it,
leading to latent, subtle bugs. If we want to eliminate these
latent, subtle bugs, there are two ways to do this:
either make errorful implementations more common
(exposing the client bugs more often) or redefine the Context
interface so that the clients are not buggy after all.
If we make errorful implementations more common, such
as by changing the standard context implementations to
return ErrNotDone instead of nil when Err is called before
Done is closed, this will shake out essentially all of the
technically incorrect clients, forcing people to find and fix
those clients during the transition to Go 1.9.
Technically this is allowed by the compatibility policy,
but we expect there are many pieces of code assuming
that Err() != nil means done, so updating will cause real pain.
If instead we disallow errorful implementations, then they
will need to be fixed as they are discovered, but the fault
will officially lie in the errorful Context implementation,
not in the clients. Technically this is disallowed by the compatibility
policy, because these errorful implementations were "correct"
in earlier versions of Go, except that they didn't work with
common client code. We expect there are hardly any errorful
implementations, so that disallowing them will be less disruptive
and more in the spirit of the compatibility policy.
This CL takes the path of expected least disruption,
narrowing the Context interface semantics and potentially
invalidating existing implementations. A survey of the
go-corpus v0.01 turned up only five Context implementations,
all trivial and none errorful (details in #19856).
We are aware of one early Context implementation inside Google,
from before even golang.org/x/net/context existed,
that is errorful. The misbehavior of an open-source library
when passed such a context is what prompted #19856.
That context implementation would be disallowed after this CL
and would need to be corrected. We are aware of no other
affected context implementations. On the other hand, a survey
of the go-corpus v0.01 turned up many instances of client
code assuming that Err() == nil implies not done yet
(details also in #19856). On balance, narrowing Context and
thereby allowing Err() == nil checks should invalidate significantly
less code than a push to flush out all the currently technically
incorrect Err() == nil checks.
If release feedback shows that we're wrong about this balance,
we can roll back this CL and try again in Go 1.10.
Fixes#19856.
Change-Id: Id45d126fac70e1fcc42d73e5a87ca1b66935b831
Reviewed-on: https://go-review.googlesource.com/40291
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Sameer Ajmani <sameer@golang.org>
Since close errors have been cleaned up in CL 39997,
TestCloseError is failing on Plan 9, because
TCPListener.Close didn't check that the listener
has already been closed before writing the "hangup"
string to the listener control file.
This change fixes TCPListener.Close on Plan 9,
by closing poll.FD before writing the "hangup"
string.
Fixes#20128.
Change-Id: I13862b23a9055dd1be658acef7066707d98c591f
Reviewed-on: https://go-review.googlesource.com/41850
Run-TryBot: David du Colombier <0intro@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This updates sha256.block and sha512.block to use vector instructions. While
each round must still be performed independently, this allows for the use of
the vshasigma{w,d} crypto acceleration instructions.
For crypto/sha256:
benchmark old ns/op new ns/op delta
BenchmarkHash8Bytes 570 300 -47.37%
BenchmarkHash1K 7529 3018 -59.91%
BenchmarkHash8K 55308 21938 -60.33%
benchmark old MB/s new MB/s speedup
BenchmarkHash8Bytes 14.01 26.58 1.90x
BenchmarkHash1K 136.00 339.23 2.49x
BenchmarkHash8K 148.11 373.40 2.52x
For crypto/sha512:
benchmark old ns/op new ns/op delta
BenchmarkHash8Bytes 725 394 -45.66%
BenchmarkHash1K 5062 2107 -58.38%
BenchmarkHash8K 34711 13918 -59.90%
benchmark old MB/s new MB/s speedup
BenchmarkHash8Bytes 11.03 20.29 1.84x
BenchmarkHash1K 202.28 485.84 2.40x
BenchmarkHash8K 236.00 588.56 2.49x
Fixes#20069
Change-Id: I28bffe6e9eb484a83a004116fce84acb4942abca
Reviewed-on: https://go-review.googlesource.com/41391
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
This may improve perormance during concurrent access
to mheap.central array from multiple CPU cores.
Change-Id: I8f48dd2e72aa62e9c32de07ae60fe552d8642782
Reviewed-on: https://go-review.googlesource.com/41550
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Moved the relevant file.close() usages close to after the
file opens and put them in defer statements, so that readers
don't have to think too much as to where the file is
being closed.
Change-Id: Ic4190b02ea2f5ac281b9ba104e0023e9f87ca8c7
Reviewed-on: https://go-review.googlesource.com/41796
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Catch all the cases where a file operation might return ErrFileClosing,
and convert to ErrClosed. Use a new method for the conversion, which
permits us to remove some KeepAlive calls.
Change-Id: I584178f297efe6cb86f3090b2341091b412f1041
Reviewed-on: https://go-review.googlesource.com/41793
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The LocalAddrContext should have the network address of the actual
interface.
Fixes#18686
Change-Id: I9c401eda312f3a0e7e65b013af827aeeef3b4d3d
Reviewed-on: https://go-review.googlesource.com/35490
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Node.Walkdef is 0, 1, or 2, so it only requires two bits.
Add support for 2-bit values to bitset,
and use it for Node.Walkdef.
Class, Embedded, Typecheck, and Initorder will follow suit
in subsequent CLs.
The multi-bit flags will go at the beginning,
since that generates (marginally) more efficient code.
Change-Id: Id6e2e66e437f10aaa05b8a6e1652efb327d06128
Reviewed-on: https://go-review.googlesource.com/41791
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In the past we returned "use of closed network connection" when using
a closed network descriptor in some way. In CL 36799 that was changed
to return "use of closed file or network connection". Because programs
have no access to a value of this error type (see issue #4373) they
resort to doing direct string comparisons (see issue #19252). This CL
restores the old error string so that we don't break programs
unnecessarily with the 1.9 release.
This adds a test to the net package for the expected string.
For symmetry check that the os package returns the expected error,
which for os already exists as os.ErrClosed.
Updates #4373.
Fixed#19252.
Change-Id: I5b83fd12cfa03501a077cad9336499b819f4a38b
Reviewed-on: https://go-review.googlesource.com/39997
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
In addition to being more compact,
this makes the code a lot clearer.
Change-Id: Ibcb70526c2e5913dcf34904fda194e3585228c3f
Reviewed-on: https://go-review.googlesource.com/41761
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
node.Likely may once have held -1/0/+1,
but it is now only 0/1.
With improved SSA heuristics,
it may someday go away entirely.
Change-Id: I6451d17fd7fb47e67fea4d39df302b6db00ea57b
Reviewed-on: https://go-review.googlesource.com/41760
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It was added in Go 1.7. Also gofmt while at it.
Change-Id: Idb65fb44e2f2a4365dceea3f833aeb51a8d12333
Reviewed-on: https://go-review.googlesource.com/41692
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This updates the bundled http2 package from git rev
5602c733f70afc6dcec6766be0d5034d4c4f14de of the x/net repo for:
http2: Use NO_ERROR instead of CANCEL when responding before the request is finished
https://golang.org/cl/40630
http2: enforce write deadline per stream
https://golang.org/cl/34727
Updates golang/go#19948Fixesgolang/go#18437
Change-Id: I14500476e91551fa8f27a1aeb8ae3cac9600b74c
Reviewed-on: https://go-review.googlesource.com/41753
Reviewed-by: Kale Blankenship <kale@lemnisys.com>
Reviewed-by: Tom Bergan <tombergan@google.com>
Run-TryBot: Kale Blankenship <kale@lemnisys.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Updates golang_org/x/net/route to rev da118f7 for:
- route: don't fail test when at least one version of INET protocols is available
Updates #19298.
Updates #19967.
Change-Id: I46948f1bd4ac6e6afd424623233f90e2b6b954c6
Reviewed-on: https://go-review.googlesource.com/41652
Run-TryBot: Mikio Hara <mikioh.mikioh@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Updates golang_org/x/net/lif to rev a25ba90 for:
- lif: don't fail test when at least one version of INET protocols is available
Updates #19967.
Change-Id: I4b946a4c6eee7938193688ecbfc4a9d69d88c94e
Reviewed-on: https://go-review.googlesource.com/41651
Run-TryBot: Mikio Hara <mikioh.mikioh@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
