Previously, genMatch0 and genResult0 contained
lots of duplication: locating the op, parsing
the value, validation, etc.
Parsing and validation was mixed in with code gen.
Extract a helper, parseValue. It is responsible
for parsing the value, locating the op, and doing
shared validation.
As a bonus (and possibly as my original motivation),
make op selection pay attention to the number
of args present.
This allows arch-specific ops to share a name
with generic ops as long as there is no ambiguity.
It also detects and reports unresolved ambiguity,
unlike before, where it would simply always
pick the generic op, with no warning.
Also use parseValue when generating the top-level
op dispatch, to ensure its opinion about ops
matches genMatch0 and genResult0.
The order of statements in the generated code used
to depend on the exact rule. It is now somewhat
independent of the rule. That is the source
of some of the generated code changes in this CL.
See rewritedec64 and rewritegeneric for examples.
It is a one-time change.
The op dispatch switch and functions used to be
sorted by opname without architecture. The sort
now includes the architecture, leading to further
generated code changes.
See rewriteARM and rewriteAMD64 for examples.
Again, it is a one-time change.
There are no functional changes.
Change-Id: I22c989183ad5651741ebdc0566349c5fd6c6b23c
Reviewed-on: https://go-review.googlesource.com/24649
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
macOS Sierra beta4 changed the kernel interface for getting time.
DX now optionally points to an address for additional info.
Set it to zero to avoid corrupting memory.
Fixes#16570
Change-Id: I9f537e552682045325cdbb68b7d0b4ddafade14a
Reviewed-on: https://go-review.googlesource.com/25400
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Quentin Smith <quentin@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The commit in golang.org/cl/22354 groups constructors functions under
the type that they construct to. However, this caused a minor regression
where functions that had unexported return values were not being printed
at all. Thus, we forgo the grouping logic if the type the constructor falls
under is not going to be printed.
Fixes#16568
Change-Id: Idc14f5d03770282a519dc22187646bda676af612
Reviewed-on: https://go-review.googlesource.com/25369
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
Reviewed-by: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Changes made:
* Disallow star expression on interfaces as this is not possible.
* Show an embedded "error" in an interface as public similar to
how godoc does it.
* Properly handle selector expressions in both structs and interfaces.
This is possible since a type may refer to something defined in
another package (e.g. io.Reader).
Before:
<<<
$ go doc runtime.Error
type Error interface {
// RuntimeError is a no-op function but
// serves to distinguish types that are run time
// errors from ordinary errors: a type is a
// run time error if it has a RuntimeError method.
RuntimeError()
// Has unexported methods.
}
$ go doc compress/flate Reader
doc: invalid program: unexpected type for embedded field
doc: invalid program: unexpected type for embedded field
type Reader interface {
io.Reader
io.ByteReader
}
>>>
After:
<<<
$ go doc runtime.Error
type Error interface {
error
// RuntimeError is a no-op function but
// serves to distinguish types that are run time
// errors from ordinary errors: a type is a
// run time error if it has a RuntimeError method.
RuntimeError()
}
$ go doc compress/flate Reader
type Reader interface {
io.Reader
io.ByteReader
}
>>>
Fixes#16567
Change-Id: I272dede971eee9f43173966233eb8810e4a8c907
Reviewed-on: https://go-review.googlesource.com/25365
Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This was previously fixed in https://golang.org/cl/21497 but not enough.
Fixes#16523
Change-Id: I678543a656304c82d654e25e12fb094cd6cc87e8
Reviewed-on: https://go-review.googlesource.com/25330
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
SSA compiler on AMD64 may spill Duff-adjusted address as scalar. If
the object is on stack and the stack moves, the spilled address become
invalid.
Making the spill pointer-typed does not work. The Duff-adjusted address
points to the memory before the area to be zeroed and may be invalid.
This may cause stack scanning code panic.
Fix it by doing Duff-adjustment in genValue, so the intermediate value
is not seen by the reg allocator, and will not be spilled.
Add a test to cover both cases. As it depends on allocation, it may
be not always triggered.
Fixes#16515.
Change-Id: Ia81d60204782de7405b7046165ad063384ede0db
Reviewed-on: https://go-review.googlesource.com/25309
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Apparently the old backend needs NEG instruction having RegRead set,
even this instruction does not take a Reg field... I don't think SSA
uses this flag, so just leave it as it was. SSA is still happy.
Fix ARM64 build on https://build.golang.org/?branch=dev.ssa
Change-Id: Ia7e7f2ca217ddae9af314d346af5406bbafb68e8
Reviewed-on: https://go-review.googlesource.com/25302
Reviewed-by: David Chase <drchase@google.com>
Mutator goroutines that allocate memory during the concurrent mark
phase are required to spend some time assisting the garbage
collector. The magnitude of this mandatory assistance is proportional
to the goroutine's allocation debt and subject to the assistance
ratio as calculated by the pacer.
When assisting the garbage collector, a mutator goroutine will go
beyond paying off its allocation debt. It will build up extra credit
to amortize the overhead of the assist.
In fast-allocating applications with high assist ratios, building up
this credit can take the affected goroutine's entire time slice.
Reduce the penalty on each goroutine being selected to assist the GC
in two ways, to spread the responsibility more evenly.
First, do a consistent amount of extra scan work without regard for
the pacer's assistance ratio. Second, reduce the magnitude of the
extra scan work so it can be completed within a few hundred
microseconds.
Commentary on gcOverAssistWork is by Austin Clements, originally in
https://golang.org/cl/24704
Updates #14812Fixes#16432
Change-Id: I436f899e778c20daa314f3e9f0e2a1bbd53b43e1
Reviewed-on: https://go-review.googlesource.com/25155
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Rick Hudson <rlh@golang.org>
Reviewed-by: Chris Broadfoot <cbro@golang.org>
Instead of comparing the address of the end of the memory to zero/copy,
comparing the address of the last element, which is a valid pointer.
Also unify large and unaligned Zero/Move, by passing alignment as AuxInt.
Fixes#16515 for ARM.
Change-Id: I19a62b31c5acf5c55c16a89bea1039c926dc91e5
Reviewed-on: https://go-review.googlesource.com/25300
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Support the following:
- Shifts. ARM64 machine instructions only use lowest 6 bits of the
shift (i.e. mod 64). Use conditional selection instruction to
ensure Go semantics.
- Zero/Move. Alignment is ensured.
- Hmul, Avg64u, Sqrt.
- reserve R18 (platform register in ARM64 ABI) and R29 (frame pointer
in ARM64 ABI).
Everything compiles, all.bash passed (with non-SSA test disabled).
Change-Id: Ia8ed58dae5cbc001946f0b889357b258655078b1
Reviewed-on: https://go-review.googlesource.com/25290
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
https://golang.org/cl/25233 was detecting the OS X release at compile
time, not run time. Detect it at run time instead.
Fixes#16473 (again)
Change-Id: I6bec4996e57aa50c52599c165aa6f1fae7423fa7
Reviewed-on: https://go-review.googlesource.com/25281
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
Reviewed-by: Chris Broadfoot <cbro@golang.org>
Updates x/net/http2 to git rev 6a513af for:
http2: return flow control for closed streams
https://golang.org/cl/25231
http2: make Transport prefer HTTP response header recv before body write error
https://golang.org/cl/24984
http2: make Transport treat "Connection: close" the same as Request.Close
https://golang.org/cl/24982Fixesgolang/go#16481
Change-Id: Iaddb166387ca2df1cfbbf09a166f8605578bec49
Reviewed-on: https://go-review.googlesource.com/25282
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
Currently the pprof package gives almost no guidance for how to use it
and, despite the standard boilerplate used to create CPU and memory
profiles, this boilerplate appears nowhere in the pprof documentation.
Update the pprof package documentation to give the standard
boilerplate in a form people can copy, paste, and tweak. This
boilerplate is based on rsc's 2011 blog post on profiling Go programs
at https://blog.golang.org/profiling-go-programs, which is where I
always go when I need to copy-paste the boilerplate.
Change-Id: I74021e494ea4dcc6b56d6fb5e59829ad4bb7b0be
Reviewed-on: https://go-review.googlesource.com/25182
Reviewed-by: Rick Hudson <rlh@golang.org>
Conservative fix for the OS X 10.8 crash. We can unify them back together
during the Go 1.8 dev cycle.
Fixes#16473
Change-Id: If07228deb2be36093dd324b3b3bcb31c23a95035
Reviewed-on: https://go-review.googlesource.com/25233
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
Added support for ClosureCall, DeferCall, InterCall
(GoCall not yet tested).
Added support for GetClosurePtr, IsNonNil, IsInBounds, IsSliceInBounds, NilCheck
(Convert and GetG not yet tested)
Still need to implement NilCheck optimizations.
Fixed move boolean constant, order of operands to subtract.
Updates #16010.
Change-Id: Ibe0f6a6e688df4396cd77de0e9095997e4ca8ed2
Reviewed-on: https://go-review.googlesource.com/25241
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Adds a test case for calling context.WithDeadline() where the deadline
exists in the past. This change increases the code coverage of the
context package.
Change-Id: Ib486bf6157e779fafd9dab2b7364cdb5a06be36e
Reviewed-on: https://go-review.googlesource.com/25007
Reviewed-by: Sameer Ajmani <sameer@golang.org>
Run-TryBot: Sameer Ajmani <sameer@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
From at least Go 1.4 to Go 1.6, Transport.RoundTrip would return the
error value from net.Conn.Read directly when the initial Read (1 byte
Peek) failed while reading the HTTP response, if a request was
outstanding. While never a documented or tested promise, Go 1.7 changed the
behavior (starting at https://golang.org/cl/23160).
This restores the old behavior and adds a test (but no documentation
promises yet) while keeping the fix for spammy logging reported in #15446.
This looks larger than it is: it just changes errServerClosedConn from
a variable to a type, where the type preserves the underlying
net.Conn.Read error, for unwrapping later in Transport.RoundTrip.
Fixes#16465
Change-Id: I6fa018991221e93c0cfe3e4129cb168fbd98bd27
Reviewed-on: https://go-review.googlesource.com/25153
Reviewed-by: Andrew Gerrand <adg@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Because PPC lacks store-immediate, remove the instruction
that implies that it exists. Replace it with storezero for
the special case of storing zero, because R0 is reserved zero
for Go (though the assembler knows this, do it in SSA).
Also added address folding for storezero.
(Now corrected to use right-sized stores in bulk-zero code.)
Hello.go now compiles to
genssa main
00000 (...hello.go:7) TEXT "".main(SB), $0
00001 (...hello.go:7) FUNCDATA $0, "".gcargs·0(SB)
00002 (...hello.go:7) FUNCDATA $1, "".gclocals·1(SB)
v23 00003 (...hello.go:8) MOVD $go.string."Hello, World!\n"(SB), R3
v11 00004 (...hello.go:8) MOVD R3, 32(R1)
v22 00005 (...hello.go:8) MOVD $14, R3
v6 00006 (...hello.go:8) MOVD R3, 40(R1)
v20 00007 (...hello.go:8) MOVD R0, 48(R1)
v18 00008 (...hello.go:8) MOVD R0, 56(R1)
v9 00009 (...hello.go:8) MOVD R0, 64(R1)
v10 00010 (...hello.go:8) CALL fmt.Printf(SB)
b2 00011 (...hello.go:9) RET
00012 (<unknown line number>) END
Updates #16010
Change-Id: I33cfd98c21a1617502260ac753fa8cad68c8d85a
Reviewed-on: https://go-review.googlesource.com/25151
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Mostly copied from ARM port, with instruction names and Prog fields
adjusted, and 64-bit int ops added. Not complete.
Fib compiles and runs correctly.
Change-Id: Id3ecb0d4b571200a035344b3e8e4408769f76221
Reviewed-on: https://go-review.googlesource.com/25130
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Noticed when investigating a separate issue.
No external bug report or repro yet.
Change-Id: I8a1641a43163f22b09accd3beb25dd9e2a68a238
Reviewed-on: https://go-review.googlesource.com/25152
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
GOARCH=386 SSATEST=1 ./all.bash passes
Caveat: still needs changes to test/ files to use *_ssa.go versions. I
won't check those changes in with this CL because the builders will
complain as they don't have SSATEST=1.
Mostly minor fixes.
Implement float <-> uint32 in assembly. It seems the simplest option
for now.
GO386=387 does not work. That's why I can't make SSA the default for
386 yet.
Change-Id: Ic4d4402104d32bcfb1fd612f5bb6539f9acb8ae0
Reviewed-on: https://go-review.googlesource.com/25119
Reviewed-by: Cherry Zhang <cherryyz@google.com>
For register-register move, if there is only one use, allocate it in
the same register so we don't need to emit an instruction.
Updates #15365.
Change-Id: Iad41843854a506c521d577ad93fcbe73e8de8065
Reviewed-on: https://go-review.googlesource.com/25059
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This is:
(1) a simple trick that cuts the number of phi-nodes
(temporarily) inserted into the ssa representation by a factor
of 10, and can cut the user time to compile tricky inputs like
gogo/protobuf tests from 13 user minutes to 9.5, and memory
allocation from 3.4GB to 2.4GB.
(2) a fix to sparse lookup, that does not rely on
an assumption proven false by at least one pathological
input "etldlen".
These two changes fix unrelated compiler performance bugs,
both necessary to obtain good performance compiling etldlen.
Without them it takes 20 minutes or longer, with them it
completes in 2 minutes, without a gigantic memory footprint.
Updates #16407
Change-Id: Iaa8aaa8c706858b3d49de1c4865a7fd79e6f4ff7
Reviewed-on: https://go-review.googlesource.com/23136
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
entry:
x = MOVQconst [7]
...
b1:
goto b2
b2:
v = Phi(x, y, z)
Transform that program to:
entry:
...
b1:
x = MOVQconst [7]
goto b2
b2:
v = Phi(x, y, z)
This CL moves constant-generating instructions used by a phi to the
appropriate immediate predecessor of the phi's block.
We used to put all constants in the entry block. Unfortunately, in
large functions we have lots of constants at the start of the
function, all of which are used by lots of phis throughout the
function. This leads to the constants being live through most of the
function (especially if there is an outer loop). That's an O(n^2)
problem.
Note that most of the non-phi uses of constants have already been
folded into instructions (ADDQconst, MOVQstoreconst, etc.).
This CL may be generally useful for other instances of compiler
slowness, I'll have to check. It may cause some programs to run
slower, but probably not by much, as rematerializeable values like
these constants are allocated late (not at their originally scheduled
location) anyway.
This CL is definitely a minimal change that can be considered for 1.7.
We probably want to do a better job in the tighten pass generally, not
just for phi args. Leaving that for 1.8.
Update #16407
Change-Id: If112a8883b4ef172b2f37dea13e44bda9346c342
Reviewed-on: https://go-review.googlesource.com/25046
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
The omission of this instruction could confuse the traceback code if a
SIGPROF occurred during a signal handler. The traceback code would
trace up to sigtramp, but would then get confused because it would see a
PC address that did not appear to be in the function.
Fixes#16453.
Change-Id: I2b3d53e0b272fb01d9c2cb8add22bad879d3eebc
Reviewed-on: https://go-review.googlesource.com/25104
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Most operations need an upper bound on the physical page size, which
is what sys.PhysPageSize is for (this is checked at runtime init on
Linux). However, a few operations need a *lower* bound on the physical
page size. Introduce a "minPhysPageSize" constant to act as this lower
bound and use it where it makes sense:
1) In addrspace_free, we have to query each page in the given range.
Currently we increment by the upper bound on the physical page
size, which means we may skip over pages if the true size is
smaller. Worse, we currently pass a result buffer that only has
enough room for one page. If there are actually multiple pages in
the range passed to mincore, the kernel will overflow this buffer.
Fix these problems by incrementing by the lower-bound on the
physical page size and by passing "1" for the length, which the
kernel will round up to the true physical page size.
2) In the write barrier, the bad pointer check tests for pointers to
the first physical page, which are presumably small integers
masquerading as pointers. However, if physical pages are smaller
than we think, we may have legitimate pointers below
sys.PhysPageSize. Hence, use minPhysPageSize for this test since
pointers should never fall below that.
In particular, this applies to ARM64 and MIPS. The runtime is
configured to use 64kB pages on ARM64, but by default Linux uses 4kB
pages. Similarly, the runtime assumes 16kB pages on MIPS, but both 4kB
and 16kB kernel configurations are common. This also applies to ARM on
systems where the runtime is recompiled to deal with a larger page
size. It is also a step toward making the runtime use only a
dynamically-queried page size.
Change-Id: I1fdfd18f6e7cbca170cc100354b9faa22fde8a69
Reviewed-on: https://go-review.googlesource.com/25020
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Austin Clements <austin@google.com>
When a non-Go thread calls into Go, the runtime needs an M to run the Go
code. The runtime keeps a list of extra M's available. When the last
extra M is allocated, the needextram field is set to tell it to allocate
a new extra M as soon as it is running in Go. This ensures that an extra
M will always be available for the next thread.
However, if many threads need an extra M at the same time, this
serializes them all. One thread will get an extra M with the needextram
field set. All the other threads will see that there is no M available
and will go to sleep. The one thread that succeeded will create a new
extra M. One lucky thread will get it. All the other threads will see
that there is no M available and will go to sleep. The effect is
thundering herd, as all the threads looking for an extra M go through
the process one by one. This seems to have a particularly bad effect on
the FreeBSD scheduler for some reason.
With this change, we track the number of threads waiting for an M, and
create all of them as soon as one thread gets through. This still means
that all the threads will fight for the lock to pick up the next M. But
at least each thread that gets the lock will succeed, instead of going
to sleep only to fight again.
This smooths out the performance greatly on FreeBSD, reducing the
average wall time of `testprogcgo CgoCallbackGC` by 74%. On GNU/Linux
the average wall time goes down by 9%.
Fixes#13926Fixes#16396
Change-Id: I6dc42a4156085a7ed4e5334c60b39db8f8ef8fea
Reviewed-on: https://go-review.googlesource.com/25047
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
This copies the frozen wording from the log/syslog package.
Fixes#16436
Change-Id: If5d478023328925299399f228d8aaf7fb117c1b4
Reviewed-on: https://go-review.googlesource.com/25080
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
Fix up zero/move code, including duff calls and rep movs.
Handle the new ops generated by dec64.rules.
Fix constant shifts.
Change-Id: I7d89194b29b04311bfafa0fd93b9f5644af04df9
Reviewed-on: https://go-review.googlesource.com/25033
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
We now allow Values to have 2 outputs. Use that ability for amd64.
This allows x,y := a/b,a%b to use just a single divide instruction.
Update #6815
Change-Id: Id70bcd20188a2dd8445e631a11d11f60991921e4
Reviewed-on: https://go-review.googlesource.com/25004
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
Make tuple types and their SelectX ops fully generic.
These ops no longer need to be lowered.
Regalloc understands them and their tuple-generating arguments.
We can now have opcodes returning arbitrary pairs of results.
(And it would be easy to move to >2 results if needed.)
Update arm implementation to the new standard.
Implement just enough in 386 port to do 64-bit add.
Change-Id: I370ed5aacce219c82e1954c61d1f63af76c16f79
Reviewed-on: https://go-review.googlesource.com/24976
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Because,
* The CGI spec defines that incoming request header "Foo: Bar" maps to
environment variable HTTP_FOO == "Bar". (see RFC 3875 4.1.18)
* The HTTP_PROXY environment variable is conventionally used to configure
the HTTP proxy for HTTP clients (and is respected by default for
Go's net/http.Client and Transport)
That means Go programs running in a CGI environment (as a child
process under a CGI host) are vulnerable to an incoming request
containing "Proxy: attacker.com:1234", setting HTTP_PROXY, and
changing where Go by default proxies all outbound HTTP requests.
This is CVE-2016-5386, aka https://httpoxy.org/Fixes#16405
Change-Id: I6f68ade85421b4807785799f6d98a8b077e871f0
Reviewed-on: https://go-review.googlesource.com/25010
Run-TryBot: Chris Broadfoot <cbro@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Chris Broadfoot <cbro@golang.org>
Only run TestDialerDualStack on the builders, as to not annoy or
otherwise distract users when it's not their fault.
Even though the intention is to only run this on the builders, very
few of the builders have IPv6 support. Oh well. We'll get some
coverage.
Updates #13324
Change-Id: I13e7e3bca77ac990d290cabec88984cc3d24fb67
Reviewed-on: https://go-review.googlesource.com/24985
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
Change https://golang.org/cl/19895 caused a regression
where the last character in a string would be dropped if it was
accompanied by an io.EOF.
This change fixes the logic so that the last byte is still returned
without a problem.
Fixes#16393
Change-Id: I7a4d0abf761c2c15454136a79e065fe002d736ea
Reviewed-on: https://go-review.googlesource.com/24981
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
NaCl code runs in sandbox and there are restrictions for its
instruction uses
(https://developer.chrome.com/native-client/reference/sandbox_internals/arm-32-bit-sandbox).
Like the legacy backend, on NaCl,
- don't use R9, which is used as NaCl's "thread pointer".
- don't use Duff's device.
- don't use indexed load/stores.
- the assembler rewrites DIV/MOD to runtime calls, which on NaCl
clobbers R12, so R12 is marked as clobbered for DIV/MOD.
- other restrictions are satisfied by the assembler.
Enable SSA specific tests on nacl/arm, and disable non-SSA ones.
Updates #15365.
Change-Id: I9262693ec6756b89ca29d3ae4e52a96fe5403b02
Reviewed-on: https://go-review.googlesource.com/24859
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Add some simplification rules for floating point ops.
cmd/internal/obj/arm supports instructions that compare FP register
to 0, but runtime softfloat simulator does not. This CL adds these
instructions to softfloat simulator as well.
Updates #15365.
Change-Id: I29405b2bfcb4c8cf106cb7a1a811409fec91b170
Reviewed-on: https://go-review.googlesource.com/24790
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
If a spill is used to satisfy a merge edge (in shuffle), don't sink
it out of loop.
This is found in the following code (on ARM) where there is a stack
Phi (v268) inside a loop (b36 -> ... -> b47 -> b38 -> b36).
(before shuffle)
b36: <- b34 b38
...
v268 = Phi <int> v410 v360 : autotmp_198[int]
...
... -> b47
b47: <- b44
...
v360 = ... : R6
v230 = StoreReg <int> v360 : autotmp_198[int]
v261 = CMPconst <flags> [0] v360
EQ v261 -> b49 b38 (unlikely)
b38: <- b47
...
Plain -> b36
During shuffle, v230 (as spill of v360) is found to satisfy v268, but
it didn't record its use in shuffle, and v230 is sunk out of the loop
(to b49), which leads to bad value in v268.
This seems never happened on AMD64 (in make.bash), until 4 registers
are removed.
Change-Id: I01dfc28ae461e853b36977c58bcfc0669e556660
Reviewed-on: https://go-review.googlesource.com/24858
Reviewed-by: David Chase <drchase@google.com>
This CL implements the following optimizations for ARM:
- use shifted ops (e.g. ADD R1<<2, R2) and indexed load/stores
- break up shift ops. Shifts used to be one SSA op that generates
multiple instructions. We break them up to multiple ops, which
allows constant folding and CSE for comparisons. Conditional moves
are introduced for this.
- simplify zero/sign-extension ops.
Updates #15365.
Change-Id: I55e262a776a7ef2a1505d75e04d1208913c35d39
Reviewed-on: https://go-review.googlesource.com/24512
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Basically just copied all the amd64 files, removed all the *Q ops,
and rebuilt.
Compiles fib successfully.
Still need to do:
- all the 64->32 bit op translations.
- audit for instructions that aren't available on 386.
- GO386=387?
Update #16358
Change-Id: Ib8c684586416a554a527a5eefa0cff71424e36f5
Reviewed-on: https://go-review.googlesource.com/24912
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This fixes erroneous handling of the more result parameter of
runtime.Frames.Next.
Fixes#16349.
Change-Id: I4f1c0263dafbb883294b31dbb8922b9d3e650200
Reviewed-on: https://go-review.googlesource.com/24911
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Regression from Go 1.6 to Go 1.7rc1: we had broken the ability for
users to vendor "golang.org/x/net/http2" or "golang.org/x/net/route"
because we were vendoring them ourselves and cmd/go and cmd/compile do
not understand multiple vendor directories across multiple GOPATH
workspaces (e.g. user's $GOPATH and default $GOROOT).
As a short-term fix, since fixing cmd/go and cmd/compile is too
invasive at this point in the cycle, just rename "golang.org" to
"golang_org" for the standard library's vendored copy.
Fixes#16333
Change-Id: I9bfaed91e9f7d4ca6bab07befe80d71d437a21af
Reviewed-on: https://go-review.googlesource.com/24902
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes#12272
Change-Id: I0306ce0ef4a87df2158df3b7d4d8d93a1cb6dabc
Reviewed-on: https://go-review.googlesource.com/24864
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
The cgocallback function picked up a ctxt parameter in CL 22508.
That CL updated the assembler implementation, but there are a few
mentions in Go code that were not updated. This CL fixes that.
Fixes#16326
Change-Id: I5f68e23565c6a0b11057aff476d13990bff54a66
Reviewed-on: https://go-review.googlesource.com/24848
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
The reflect package was returning a non-empty PkgPath for an unnamed
type with methods, such as a type whose methods have a pointer
receiver.
Fixes#16328.
Change-Id: I733e93981ebb5c5c108ef9b03bf5494930b93cf3
Reviewed-on: https://go-review.googlesource.com/24862
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This is a copy of the "FANOUT" benchmark recently added to RE2 with the
following comment:
// This has quite a high degree of fanout.
// NFA execution will be particularly slow.
Most of the benchmarks on the regexp package have very little fanout and
are designed for comparing the regexp package's NFA with backtracking
engines found in other regular expression libraries. This benchmark
exercises the performance of the NFA on expressions with high fanout.Reviewed-on: https://go-review.googlesource.com/24846
Reviewed-by: Andrew Gerrand <adg@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
"
This reverts commit fc803874d3.
Reason for revert: Breaks the -race build because the benchmark takes too long to run.
Change-Id: I6ed4b466f74a4108d8bcd5b019b9abe971eb483e
Reviewed-on: https://go-review.googlesource.com/24861
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
This is a copy of the "FANOUT" benchmark recently added to RE2 with the
following comment:
// This has quite a high degree of fanout.
// NFA execution will be particularly slow.
Most of the benchmarks on the regexp package have very little fanout and
are designed for comparing the regexp package's NFA with backtracking
engines found in other regular expression libraries. This benchmark
exercises the performance of the NFA on expressions with high fanout.
Change-Id: Ie9c8e3bbeffeb1fe9fb90474ddd19e53f2f57a52
Reviewed-on: https://go-review.googlesource.com/24846
Reviewed-by: Andrew Gerrand <adg@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
There are no synchronization points protecting the readVal and readPos
variables. This leads to a race when Read is called concurrently.
Fix this by adding methods to lockedSource, which is the case where
a race matters.
Fixes#16308.
Change-Id: Ic028909955700906b2d71e5c37c02da21b0f4ad9
Reviewed-on: https://go-review.googlesource.com/24852
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
In the beta version of the macOS Sierra (10.12) release, the
gettimeofday system call changed on x86. Previously it always returned
the time in the AX/DX registers. Now, if AX is returned as 0, it means
that the system call has stored the values into the memory pointed to by
the first argument, just as the libc gettimeofday function does. The
libc function handles both cases, and we need to do so as well.
Fixes#16272.
Change-Id: Ibe5ad50a2c5b125e92b5a4e787db4b5179f6b723
Reviewed-on: https://go-review.googlesource.com/24812
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The shrinkstack code locks all the channels a goroutine is waiting for,
but didn't handle the case of the same channel appearing in the list
multiple times. This led to a deadlock. The channels are sorted so it's
easy to avoid locking the same channel twice.
Fixes#16286.
Change-Id: Ie514805d0532f61c942e85af5b7b8ac405e2ff65
Reviewed-on: https://go-review.googlesource.com/24815
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
The test was checking for 1 of 2 possible error values. But based on
goroutine scheduling and the randomness of select statement receive
cases, it was possible for a 3rd type of error to be returned.
This modifies the code (not the test) to make that third type of error
actually the second type of error, which is a nicer error message.
The test is no longer flaky. The flake was very reproducible with a
5ms sleep before the select at the end of Transport.getConn.
Thanks to Github user @jaredborner for debugging.
Fixes#16049
Change-Id: I0d2a036c9555a8d2618b07bab01f28558d2b0b2c
Reviewed-on: https://go-review.googlesource.com/24748
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Document explicitly which functions Clean the result rather than
documenting it in the package comment.
Updates #10122.
Fixes#16111.
Change-Id: Ia589c7ee3936c9a6a758725ac7f143054d53e41e
Reviewed-on: https://go-review.googlesource.com/24747
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This new comment can be used to declare that the uintptr arguments to a
function may be converted from pointers, and that those pointers should
be considered to escape. This is used for the Call methods in
dll_windows.go that take uintptr arguments, because they call Syscall.
We can't treat these functions as we do syscall.Syscall, because unlike
Syscall they may cause the stack to grow. For Syscall we can assume that
stack arguments can remain on the stack, but for these functions we need
them to escape.
Fixes#16035.
Change-Id: Ia0e5b4068c04f8d303d95ab9ea394939f1f57454
Reviewed-on: https://go-review.googlesource.com/24551
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fixes#8833
Change-Id: I4523a1de112ed02371504e27882659bce8028a45
Reviewed-on: https://go-review.googlesource.com/24745
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
These were helpful for some autogenerated code
I'm working with.
Change-Id: I7b89c69552ca99bf560a14bfbcd6bd238595ddf6
Reviewed-on: https://go-review.googlesource.com/24742
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Mostly constant folding rules, analogous to AMD64 ones. Along with
some simplifications.
Updates #15365.
Change-Id: If83bc1188bb05acb982ef3a1c21704c187e3eb24
Reviewed-on: https://go-review.googlesource.com/24210
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
As Josh mentioned in CL 24716, there has been requests for using SSA
for ARM. SSA can still be disabled by setting -ssa=0 for cmd/compile,
or partially enabled with GOSSAFUNC, GOSSAPKG, and GOSSAHASH.
Not enable SSA by default on NaCl, which is not supported yet.
Enable SSA-specific tests on ARM: live_ssa.go and nilptr3_ssa.go;
disable non-SSA tests: live.go, nilptr3.go, and slicepot.go.
Updates #15365.
Change-Id: Ic2ca8d166aeca8517b9d262a55e92f2130683a16
Reviewed-on: https://go-review.googlesource.com/23953
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
Fixes#16258.
Docs for Encode and EncodeValue do not mention that
nil pointers are not permitted hence we panic,
because Gobs encode values yet nil pointers have no value
to encode. It moves a comment that was internal to EncodeValue
to the top level to make it clearer to users what to expect
when they pass in nil pointers.
Supplements test TestTopLevelNilPointer.
Change-Id: Ie54f609fde4b791605960e088456047eb9aa8738
Reviewed-on: https://go-review.googlesource.com/24740
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Andrew Gerrand <adg@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Don't issue a copylock warning about a result type; the function may
return a composite literal with a zero value, which is OK.
Don't issue a copylock warning about a function call on the RHS, or an
indirection of a function call; the function may return a composite
literal with a zero value, which is OK.
Updates #16227.
Change-Id: I94f0e066bbfbca5d4f8ba96106210083e36694a2
Reviewed-on: https://go-review.googlesource.com/24711
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
The comments were mostly duplicated; unify them.
Add a check that the required invariant holds.
Change-Id: I42fe09dcd1fac76d3c4e191f7a58c591c5ce429b
Reviewed-on: https://go-review.googlesource.com/24719
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
ITab is handled by decomposition.
The rule is vestigial. Remove it.
Change-Id: I6fdf3d14d466761c7665c7ea14f34ca0e1e3e646
Reviewed-on: https://go-review.googlesource.com/24718
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
The original intent of the code was to allow both with and without .git
suffix for now to allow a transition period. The noVCSSuffix check was a
copy pasta error.
Fixes#15979.
Change-Id: I3d39aba8d026b40fc445244d6d01d8bc1979d1e4
Reviewed-on: https://go-review.googlesource.com/24645
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Encode the size and the alignment into AuxInt of Zero and Move ops.
On AMD64, we simply don't look at the alignment. On ARM and PPC64, we
only generate aligned stores.
Updates #15365.
Change-Id: Ifdcc205c364f67c4516b9adebfe7d50d223b6863
Reviewed-on: https://go-review.googlesource.com/24511
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If we don't mark them as needzero, we have a live pointer variable
containing possible garbage, which will baffle the GC.
Fixes#16249.
Change-Id: I7c423ceaca199ddd46fc2c23e5965e7973f07584
Reviewed-on: https://go-review.googlesource.com/24715
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The frontend may emit node with line number missing. In this case,
use the parent line number. Instead of changing every call site of
pushLine, do it in pushLine itself.
Fixes#16214.
Change-Id: I80390550b56e4d690fc770b01ff725b892ffd6dc
Reviewed-on: https://go-review.googlesource.com/24641
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Updates x/net/http2 to git rev b400c2e for https://golang.org/cl/24214,
"http2: add additional blacklisted ciphersuites"
Both TLS_RSA_WITH_AES_128_GCM_SHA256 & TLS_RSA_WITH_AES_256_GCM_SHA384
are now blacklisted, per http://httpwg.org/specs/rfc7540.html#BadCipherSuites
Change-Id: I8b9a7f4dc3c152d0675e196523ddd36111744984
Reviewed-on: https://go-review.googlesource.com/24684
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We had ~30 one way, and these four new occurrences the other way.
Updates #11626
Change-Id: Ic6403dc4905874916ae292ff739d33482ed8e5bf
Reviewed-on: https://go-review.googlesource.com/24683
Reviewed-by: Rob Pike <r@golang.org>
If the files in cmd/compile/internal/ssa/gen
are passed to go run in a different order,
e.g. due to shell differences or manual entry,
then the order of constants in opGen churns.
Sort archs by name to enforce stability.
The movement of the PPC constants is a one time cost.
Change-Id: Iebcfdb9e612d7dd8cde575f920f1292891f2f24a
Reviewed-on: https://go-review.googlesource.com/24680
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Previously we started checking for context cancelation in Wait, but
that meant that when using StdoutPipe context cancelation never took
effect.
Fixes#16222.
Change-Id: I89cd26d3499a6080bf1a07718ce38d825561899e
Reviewed-on: https://go-review.googlesource.com/24650
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This should fix the report at #16224, and also fixes running the test as
root on my Ubuntu Trusty system.
Fixes#16224.
Change-Id: I4e3b5527aa63366afb33a7e30efab088d34fb302
Reviewed-on: https://go-review.googlesource.com/24670
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
There was only one use of "HTTP/1.n" compared to "HTTP/1.x":
h2_bundle.go:// "Just as in HTTP/1.x, header field names are strings of ASCII
httputil/dump.go:// DumpRequest returns the given request in its HTTP/1.x wire
httputil/dump.go:// intact. HTTP/2 requests are dumped in HTTP/1.x form, not in their
response.go:// Write writes r to w in the HTTP/1.x server response format,
server.go: // Request.Body. For HTTP/1.x requests, handlers should read any
server.go:// The default HTTP/1.x and HTTP/2 ResponseWriter implementations
server.go:// The default ResponseWriter for HTTP/1.x connections supports
server.go:// http1ServerSupportsRequest reports whether Go's HTTP/1.x server
server.go: // about HTTP/1.x Handlers concurrently reading and writing, like
server.go: // HTTP/1.x from here on.
transport.go: return fmt.Errorf("net/http: HTTP/1.x transport connection broken: %v", err)
Be consistent.
Change-Id: I93c4c873e500f51af2b4762055e22f5487a625ac
Reviewed-on: https://go-review.googlesource.com/24610
Reviewed-by: Andrew Gerrand <adg@golang.org>
I believe it's necessary to use a buffer size smaller than 64KB because
(at least some versions of) Window using a TCP receive window less than
64KB. Currently the client and server use buffer sizes of 16KB and 32KB,
respectively (the server uses io.Copy, which defaults to 32KB internally).
Since the server has been using 32KB, it should be safe for the client to
do so as well.
Fixes#15899
Change-Id: I36d44b29f2a5022c03fc086213d3c1adf153e983
Reviewed-on: https://go-review.googlesource.com/24581
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The assembly is broken: it does `MOVQ g(R12), R14` expecting that
R12 contains tls address, but it does not do get_tls(R12) before.
This magically works on linux: `MOVQ g(R12), R14` is compiled to
`mov %fs:0xfffffffffffffff8,%r14` which does not use R12.
But it crashes on windows.
Add explicit `get_tls(R12)`.
Fixes#16206
Change-Id: Ic1f21a6fef2473bcf9147de6646929781c9c1e98
Reviewed-on: https://go-review.googlesource.com/24590
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When the blocked field was first introduced back in
https://golang.org/cl/61250043 the scheduler trace code incorrectly used
m->blocked instead of mp->blocked. That has carried through the
conversion to Go. This CL fixes it.
Change-Id: Id81907b625221895aa5c85b9853f7c185efd8f4b
Reviewed-on: https://go-review.googlesource.com/24571
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
If creating a new thread fails with EAGAIN, point the user at ulimit.
Fixes#15476.
Change-Id: Ib36519614b5c72776ea7f218a0c62df1dd91a8ea
Reviewed-on: https://go-review.googlesource.com/24570
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Updates x/net/http2 to git rev ef2e00e88 for https://golang.org/cl/24560,
"http2: make Transport return server's GOAWAY error back to the user"
Fixes#14627
Change-Id: I2bb123a3041e168db7c9446beef4ee47638f17ee
Reviewed-on: https://go-review.googlesource.com/24561
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Andrew Gerrand <adg@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Prior to this change package "foo" had to be installed in order to check
example names in "foo_test" package.
However by the time "foo_test" package is checked a parsed "foo" package
has been already constructed. Use it to check example names.
Also change TestDivergentPackagesExamples test to pass directory of the
package to the vet tool as it is the most common way to invoke it. This
requires changes to errchk to add support for grabbing source files from
a directory.
Fixes#16189
Change-Id: Ief103d07b024822282b86c24250835cc591793e8
Reviewed-on: https://go-review.googlesource.com/24488
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
TestPendingConnsAfterErr only cared that things didn't deadlock, so 5
seconds is a sufficient timer. We don't need 100 milliseconds.
I was able to reproduce with a tiny (5 nanosecond) timeout value,
instead of 100 milliseconds. In the process of testing with -race and
a high -count= value, I noticed several data races and panics
(sendings on a closed channel) which are also fixed in this change.
Fixes#15684
Change-Id: Ib4605fcc0f296e658cb948352ed642b801cb578c
Reviewed-on: https://go-review.googlesource.com/24550
Reviewed-by: Marko Tiikkaja <marko@joh.to>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
Don't configure HTTP/2 in http.Server.Serve(net.Listener) if the
Server's TLSConfig is set and doesn't include the "h2" NextProto
value. This avoids mutating a *tls.Config already in use if
previously passed to tls.NewListener.
Also document this. (it's come up a few times now)
Fixes#15908
Change-Id: I283eed82fdb29a791f80d801aadd9f75db244de0
Reviewed-on: https://go-review.googlesource.com/24508
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This adds the initial SSA implementation for PPC64.
Builds golang and all.bash runs correctly. Simple hello.go
builds but does not run.
Change-Id: I7cec211b934cd7a2dd75a6cdfaf9f71867063466
Reviewed-on: https://go-review.googlesource.com/24453
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Changes beyond generated tables:
- Now supports aliases to handle deprecated
property classes.
- Some Mongolian letters are now modifiers.
Other changes:
- strconv: newly generated table to be in sync
- regexp/syntax: updated maxFold
Fixes#16191
Change-Id: I56bdf21ee2f775f2a82d0465b3772faf5c24cb61
Reviewed-on: https://go-review.googlesource.com/24496
Run-TryBot: Marcel van Lohuizen <mpvl@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Several minor changes that remove a good chunk of the overhead added
to the reflect Name method over the 1.7 cycle, as seen from the
non-SSA architectures.
In particular, there are ~20 fewer instructions in reflect.name.name
on 386, and the method now qualifies for inlining.
The simple JSON decoding benchmark on darwin/386:
name old time/op new time/op delta
CodeDecoder-8 49.2ms ± 0% 48.9ms ± 1% -0.77% (p=0.000 n=10+9)
name old speed new speed delta
CodeDecoder-8 39.4MB/s ± 0% 39.7MB/s ± 1% +0.77% (p=0.000 n=10+9)
On darwin/amd64 the effect is less pronounced:
name old time/op new time/op delta
CodeDecoder-8 38.9ms ± 0% 38.7ms ± 1% -0.38% (p=0.005 n=10+10)
name old speed new speed delta
CodeDecoder-8 49.9MB/s ± 0% 50.1MB/s ± 1% +0.38% (p=0.006 n=10+10)
Counterintuitively, I get much more useful benchmark data out of my
MacBook Pro than a linux workstation with more expensive Intel chips.
While the laptop has fewer cores and an active GUI, the single-threaded
performance is significantly better (nearly 1.5x decoding throughput)
so the differences are more pronounced.
For #16117.
Change-Id: I4e0cc1cc2d271d47d5127b1ee1ca926faf34cabf
Reviewed-on: https://go-review.googlesource.com/24510
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This modifies a recent performance improvement to the
And8 and Or8 atomic functions which required both ppc64le
and ppc64 to use power8 instructions. Since then it was
decided that ppc64 (BE) should work for power5 and later.
This change uses instructions compatible with power5 for
ppc64 and uses power8 for ppc64le.
Fixes#16004
Change-Id: I623c75e8e6fd1fa063a53d250d86cdc9d0890dc7
Reviewed-on: https://go-review.googlesource.com/24181
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Andrew Gerrand <adg@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The version of pprof in gperftools has been deprecated.
No need to have a pointer to that version since go tool pprof
is included with the Go distro.
Change-Id: I6d769a68f64280f5db89ff6fbc67bfea9c8f1526
Reviewed-on: https://go-review.googlesource.com/24509
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
On linux/386 compared to tip:
name old time/op new time/op delta
DecodeInterfaceSlice-40 1.23ms ± 1% 1.17ms ± 1% -4.93% (p=0.000 n=9+10)
Recovers about half the performance regression from Go 1.6 on 386.
For #16117.
Change-Id: Ie8676d92a4da3e27ff21b91a98b3e13d16730ba1
Reviewed-on: https://go-review.googlesource.com/24468
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Do not throw away the rest of Int63 value used for
generation random bytes. Save it in Rand struct and
re-use during the next Read call.
Fixes#16124
Change-Id: Ic70bd80c3c3a6590e60ac615e8b3c2324589bea3
Reviewed-on: https://go-review.googlesource.com/24251
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This fixes some 40 warnings from go vet.
Fixes#16134.
Change-Id: Ib9fcba275fe692f027a2a07b581c8cf503b11087
Reviewed-on: https://go-review.googlesource.com/24287
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Change ExampleResponseRecorder to use httptest.NewRequest instead of
http.NewRequest. This makes the example shorter and shows how to use
one more function from the httptest package.
Change-Id: I3d35869bd0a4daf1c7551b649428bb2f2a45eba2
Reviewed-on: https://go-review.googlesource.com/24480
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The compiler was treating all global function literals as occurring in a
function named "glob", which caused a symbol name collision when there
was an actual function named "glob". Fixed by adding a period.
Fixes#16193.
Change-Id: I67792901a8ca04635ba41d172bfaee99944f594d
Reviewed-on: https://go-review.googlesource.com/24500
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
In the comments for this file there is a reference to gperftools
for more info on pprof. pprof now live on its own repo on github,
and the version in gperftools is deprecated.
Change-Id: I8a188f129534f73edd132ef4e5a2d566e69df7e9
Reviewed-on: https://go-review.googlesource.com/24502
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Make sure the pointer to the heap copy of an output parameter is kept
live throughout the function. The function could panic at any point,
and then a defer could recover. Thus, we need the pointer to the heap
copy always available so the post-deferreturn code can copy the return
value back to the stack.
Before this CL, the pointer to the heap copy could be considered dead in
certain situations, like code which is reverse dominated by a panic call.
Fixes#16095.
Change-Id: Ic3800423e563670e5b567b473bf4c84cddb49a4c
Reviewed-on: https://go-review.googlesource.com/24213
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This fixes the obvious bug and makes go vet look for identifiers in foo
package when checking example names in foo_test package.
Note that for this check to work the foo package have to be
installed (using go install).
This commit however doesn't fix TestDivergentPackagesExamples test that
is not implemented correctly and passes only by chance.
Updates #16189
Change-Id: I5c2f675cd07e5b66cf0432b2b3e422ab45c3dedd
Reviewed-on: https://go-review.googlesource.com/24487
Reviewed-by: Dmitri Shuralyov <shurcool@gmail.com>
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Swtich from a sync.RWMutex to atomic.Value for cacheTypeFields.
On GOARCH=386, this recovers most of the remaining performance
difference from the 1.6 release. Compared with tip on linux/386:
name old time/op new time/op delta
CodeDecoder-40 92.8ms ± 1% 87.7ms ± 1% -5.50% (p=0.000 n=10+10)
name old speed new speed delta
CodeDecoder-40 20.9MB/s ± 1% 22.1MB/s ± 1% +5.83% (p=0.000 n=10+10)
With more time and care, I believe more of the JSON decoder's work
could be shifted so it is done before decoding, and independent of
the number of bytes processed. Maybe someone could explore that for
Go 1.8.
For #16117.
Change-Id: I049655b2e5b76384a0d5f4b90e3ec7cc8d8c4340
Reviewed-on: https://go-review.googlesource.com/24472
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fixes#15788
Change-Id: I5a1fd1e5992f1c16cf8d8437d742bf02e1653b9c
Reviewed-on: https://go-review.googlesource.com/23461
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If we are using a remote source (a URL), and the user did not specify
the executable file to use, then don't try to use a local source.
This was misbehaving because the local symbolizer will not fail
if there is any memory map available, but the presence of a memory map
does not ensure that the files and symbols are actually available.
We still need a pprof testsuite.
Fixes#16159.
Change-Id: I0250082a4d5181c7babc7eeec6bc95b2f3bcaec9
Reviewed-on: https://go-review.googlesource.com/24464
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Handling a symbol with address 0 and size 0, such as an ELF STT_FILE
symbols, was causing us to disassemble the entire program. We started
adding STT_FILE symbols to help fix issue #13247.
Fixes#16154.
Change-Id: I174b9614e66ddc3d65801f7c1af7650f291ac2af
Reviewed-on: https://go-review.googlesource.com/24460
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
Like AMD64, don't issue NilCheck instruction if the subsequent block
has a load or store at the same address.
Pass test/nilptr3_ssa.go.
Updates #15365.
Change-Id: Ic88780dab8c4893c57d1c95f663760cc185fe51e
Reviewed-on: https://go-review.googlesource.com/24451
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
Previously, a 0 mantissa was special-cased during big.Float
parsing, but not during big.Rat parsing. This meant that a value
like 0e9999999999 would parse successfully in big.Float.SetString,
but would hang in big.Rat.SetString. This discrepancy became an
issue in https://golang.org/src/go/constant/value.go?#L250,
where the big.Float would report an exponent of 0, so
big.Rat.SetString would be used and would subsequently hang.
A Go Playground example of this is https://play.golang.org/p/3fy28eUJuF
The solution is to special-case a zero mantissa during big.Rat
parsing as well, so that neither big.Rat nor big.Float will hang when
parsing a value with 0 mantissa but a large exponent.
This was discovered using go-fuzz on CockroachDB:
https://github.com/cockroachdb/go-fuzz/blob/master/examples/parser/main.goFixes#16176
Change-Id: I775558a8682adbeba1cc9d20ba10f8ed26259c56
Reviewed-on: https://go-review.googlesource.com/24430
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It was out of date; in 1.7 the format changes to 0s.
Change-Id: I2013a1b0951afc5607828f313641b51c74433257
Reviewed-on: https://go-review.googlesource.com/24421
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Also replace double spaces after periods with single spaces.
Change-Id: Iedaea47595c5ce64e7e8aa3a368f36d49061c555
Reviewed-on: https://go-review.googlesource.com/24431
Reviewed-by: Alan Donovan <adonovan@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The encoding/json package uses NumMethod()==0 as a fast check for
interface satisfaction. In the case when a type has no methods at
all, we don't need to grab the RWMutex.
Improves JSON decoding benchmark on linux/amd64:
name old time/op new time/op delta
CodeDecoder-8 44.2ms ± 2% 40.6ms ± 1% -8.11% (p=0.000 n=10+10)
name old speed new speed delta
CodeDecoder-8 43.9MB/s ± 2% 47.8MB/s ± 1% +8.82% (p=0.000 n=10+10)
For #16117
Change-Id: Id717e7fcd2f41b7d51d50c26ac167af45bae3747
Reviewed-on: https://go-review.googlesource.com/24433
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
CSE may substitute a tuple generator with another one in a different
block. In this case, since we want tuple selectors to stay together
with the tuple generator, copy the selector to the new generator's
block and rewrite its use.
Op.isTupleGenerator and Op.isTupleSelector are introduced to assert
tuple ops. Use it in tighten as well.
Updates #15365.
Change-Id: Ia9e8c734b9cc3bc9fca4a2750041eef9cdfac5a5
Reviewed-on: https://go-review.googlesource.com/24137
Reviewed-by: David Chase <drchase@google.com>
This was removed in CL 19695 but it slows down reflect.New, which ends
up on the hot path of things like JSON decoding.
There is no immediate cost in binary size, but it will make it harder to
further shrink run time type information in Go 1.8.
Before
BenchmarkNew-40 30000000 36.3 ns/op
After
BenchmarkNew-40 50000000 29.5 ns/op
Fixes#16161
Updates #16117
Change-Id: If7cb7f3e745d44678f3f5cf3a5338c59847529d2
Reviewed-on: https://go-review.googlesource.com/24400
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Since at least 1.0.3, the testing package has said that logs are dumped
to standard error, but has in fact dumped the logs to standard output.
We could change to dump to standard error, but after doing it this way
for so long I think it's better to change the docs.
Fixes#16138.
Change-Id: If39c7ce91f51c7113f33ebabfb8f84fd4611b9e1
Reviewed-on: https://go-review.googlesource.com/24311
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
I tried simply increasing the size of the slice but then I got an error
because NSTATES was too small. Leaving a real fix for after 1.7.
Update #16144.
Change-Id: I8676772cb79845dd4ca1619977d4d54a2ce6de59
Reviewed-on: https://go-review.googlesource.com/24321
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
MOVB $1, (AX) was being disassembled as MOVL $1, (AX).
Use the memory size to override the standard size.
Fix the tests.
Fixes#15922
Change-Id: If92fe74c33a21e5427c8c5cc97dd15e087edb860
Reviewed-on: https://go-review.googlesource.com/23608
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is a regression from 1.6. The respective code in importimport
(export.go) was not exactly replicated with the new importer. Also
copied over the missing cyclic import check.
Added test cases.
Fixes#16133.
Change-Id: I1e0a39ff1275ca62a8054874294d400ed83fb26a
Reviewed-on: https://go-review.googlesource.com/24312
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
The cfg subpackage builds a control flow graph of ast.Nodes.
The lostcancel module checks this graph to find paths, from a call to
WithCancel to a return statement, on which the cancel variable is
not used. (A trivial case is simply assigning the cancel result to
the blank identifier.)
In a sample of 50,000 source files, the new check found 2068 blank
assignments and 118 return-before-cancel errors. I manually inspected
20 of the latter and didn't find a single false positive among them.
Change-Id: I84cd49445f9f8d04908b04881eb1496a96611205
Reviewed-on: https://go-review.googlesource.com/24150
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
The test is in the runtime package because there are other tests of
pprof there. At some point we should probably move them all into a pprof
testsuite.
Fixes#16128.
Change-Id: Ieefa40c61cf3edde11fe0cf04da1debfd8b3d7c0
Reviewed-on: https://go-review.googlesource.com/24274
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
A straight conversion from a type T to an interface type I, where T does
not implement I, should always panic with an interface conversion error
that shows the missing method. This was not happening if the conversion
was done once using the comma-ok form (the result would not be OK) and
then again in a straight conversion. Due to an error in the runtime
package the second conversion was failing with a nil pointer
dereference.
Fixes#16130.
Change-Id: I8b9fca0f1bb635a6181b8b76de8c2385bb7ac2d2
Reviewed-on: https://go-review.googlesource.com/24284
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Michel Lespinasse <walken@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
pecoff.doc (https://goo.gl/ayvckk) in section 5.6 says:
Immediately following the COFF symbol table is the COFF string table.
The position of this table is found by taking the symbol table address
in the COFF header, and adding the number of symbols multiplied by
the size of a symbol.
So it is unclear what to do when symbol table address is 0.
Lets assume executable does not have any string table.
Added new test with executable with no symbol table. The
gcc -s testdata\hello.c -o testdata\gcc-386-mingw-no-symbols-exec.
command was used to generate the executable.
Fixes#16084
Change-Id: Ie74137ac64b15daadd28e1f0315f3b62d1bf2059
Reviewed-on: https://go-review.googlesource.com/24200
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Use the same technique as mips64 for these casts (CL 22835).
We could use the FCFIDU instruction for ppc64le however it seems
better to keep it the same as ppc64 for now.
Updates #15539, updates #16004.
Change-Id: I550680e485327568bf3238c4615a6cc8de6438d7
Reviewed-on: https://go-review.googlesource.com/24191
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We haven't used poisonStack since we switched to 1-bit stack maps
(4d0f3a1), but the checks are still there. However, nothing prevents
us from genuinely allocating an object at this address on 32-bit and
causing the runtime to crash claiming that it's found a bad pointer.
Since we're not using poisonStack anyway, just pull it out.
Fixes#15831.
Change-Id: Ia6ef604675b8433f75045e369f5acd4644a5bb38
Reviewed-on: https://go-review.googlesource.com/24211
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Currently zosarch.go is written out in non-deterministic map order.
Sort the keys and write it out in sorted order to make the generated
file contents deterministic.
Change-Id: Id490f0e8665a2c619c5a7a00a30f4fc64f333258
Reviewed-on: https://go-review.googlesource.com/24174
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Minor code cleanup. Done as part of understanding
OpARMMOVWaddr, since other architectures will
need to do something similar.
Change-Id: Iea2ecf3defb4f884e63902c369cd55e4647bce7a
Reviewed-on: https://go-review.googlesource.com/24157
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This will be used verbatim in other architectures.
Change-Id: I307891ae597d797fd45f296b6a38ffe9fac6b975
Reviewed-on: https://go-review.googlesource.com/24155
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Provide better diagnostic messages.
Use an int for numRegs comparisons,
to avoid asking whether a uint8 is > 255.
Change-Id: I33ae193ce292b24b369865abda3902c3207d7d3f
Reviewed-on: https://go-review.googlesource.com/24135
Reviewed-by: Keith Randall <khr@golang.org>
This will be needed by other architectures as well.
Put a cleaner encapsulation around it.
Change-Id: I0ac25d600378042b2233301678e9d037e20701d8
Reviewed-on: https://go-review.googlesource.com/24154
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
I verified that the test fails if I undo the change that it tests for.
Updates #14732.
Change-Id: Ib30352580236adefae946450ddd6cd65a62b7cdf
Reviewed-on: https://go-review.googlesource.com/24151
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
The comments describing blocks of Pos/End implementations for various
nodes types are being misinterpreted as documentation for BadDecl,
BadExpr, BadStmt, and ImportSpec's Pos methods.
Change-Id: I935b0bc38dbc13e9305f3efeb437dd3a6575d9a1
Reviewed-on: https://go-review.googlesource.com/24152
Reviewed-by: Robert Griesemer <gri@golang.org>
Use hardware g register (R10) for GetG, allow g to appear at LHS of
some ops.
Progress on SSA backend for ARM. Now everything compiles and runs.
Updates #15365.
Change-Id: Icdf93585579faa86cc29b1e17ab7c90f0119fc4e
Reviewed-on: https://go-review.googlesource.com/23952
Reviewed-by: David Chase <drchase@google.com>
This is an attempt to get more information for #14809, which seems to
occur rarely.
Updates #14809.
Change-Id: Idbeb136ceb57993644e03266622eb699d2685d02
Reviewed-on: https://go-review.googlesource.com/24110
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
Reviewed-by: Austin Clements <austin@google.com>
Fixes#16056.
Change-Id: Ic3343914742713851b8ae969b101521f25e85e7b
Reviewed-on: https://go-review.googlesource.com/24132
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fixes#16063
Change-Id: I2e8695beb657b0aef067e83f086828d8857787ed
Reviewed-on: https://go-review.googlesource.com/24130
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Some users don't realize that creating a Context with a CancelFunc
attaches a subtree to the parent, and that that subtree is not released
until the CancelFunc is called or the parent is canceled. Make this
clear early in the package docs, so that people learning about this
package have the right conceptual model.
Change-Id: I7c77a546c19c3751dd1f3a5bc827ad106dd1afbf
Reviewed-on: https://go-review.googlesource.com/24090
Reviewed-by: Alan Donovan <adonovan@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Do run it on the builders, though.
Fixes#15881.
Change-Id: Ie42204d553cb18547ffd6441afc261717bbd9205
Reviewed-on: https://go-review.googlesource.com/24111
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The previous fix was wrong because it had two misunderstandings on
freebsd32 calling convention like the following:
- 32-bit id1 implies that it is the upper half of 64-bit id, indeed it
depends on machine endianness.
- 32-bit ARM calling convension doesn't conform to freebsd32_args,
indeed it does.
This change fixes the bugs and makes blockUntilWaitable work correctly
on freebsd/{386,arm}.
Fixes#16064.
Change-Id: I820c6d01d59a43ac4f2ab381f757c03b14bca75e
Reviewed-on: https://go-review.googlesource.com/24064
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This adds 8 bytes of binary size to every type that has methods. It is
the smallest change I could come up with for 1.7.
Fixes#16037
Change-Id: Ibe15c3165854a21768596967757864b880dbfeed
Reviewed-on: https://go-review.googlesource.com/24070
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
I don't see how the call could fail, so, no test. Just a code cleanup in
case it can fail in the future.
Fixes#15987.
Change-Id: If4af0d5e7d19cc8b13fb6a4f7661c37fb0015e83
Reviewed-on: https://go-review.googlesource.com/23860
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
A .syso file may include information that should go into the object file
that is not object code, and should be included even if not using cgo.
The example in the issue is a Windows manifest file.
Fixes#16050.
Change-Id: I1f4f3f80bb007e84d153ca2d26e5919213ea4f8d
Reviewed-on: https://go-review.googlesource.com/24032
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
The dir parameter was removed in https://golang.org/cl/5732045.
Fixes#15503.
Change-Id: I02a6d8317233bea08633715a095ea2514822032b
Reviewed-on: https://go-review.googlesource.com/24011
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <shurcool@gmail.com>
Reviewed-by: Andrew Gerrand <adg@golang.org>
Functions should be declared to end after the last real instruction, not
after the last padding byte. We achieve this by adding the padding while
assembling the text section in the linker instead of adding the padding
to the function symbol in the compiler. This change makes dtrace happy.
TODO: check that this works with external linking
Fixes#15969
Change-Id: I973e478d0cd34b61be1ddc55410552cbd645ad62
Reviewed-on: https://go-review.googlesource.com/24040
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Introduce an op MOVWaddr for addresses on ARM, instead of overuse
ADDconst.
Mark MOVWaddr as rematerializable. This fixes a liveness problem: if
it were not rematerializable, the address of a variable may be spilled
and later use of the address may just load the spilled value without
mentioning the variable, and the liveness code may think it is dead
prematurely.
Update #15365.
Change-Id: Ib0b0fa826bdb75c9e6bb362b95c6cf132cc6b1c0
Reviewed-on: https://go-review.googlesource.com/23942
Reviewed-by: David Chase <drchase@google.com>
SSA treats SP as constant throughout a function, so as OffPtr [off] SP.
When the stack moves, spilled OffPtr values become invalid, if they are
not pointer-typed.
(Currently it is fine because of the optimization rules that folds OffPtr
into Load/Store. But it'd better be "optimization", not requirement.)
Updates #15365.
Change-Id: I76cf4008dfdc169e1cb5a55a2605b6678efc915d
Reviewed-on: https://go-review.googlesource.com/23941
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Special case for rewriting OAS inits omitted OASWB, added
that and OAS2FUNC. The special case cannot be default case,
that causes racewalk to fail in horrible ways.
Fixes#16008.
Change-Id: Ie0d2f5735fe9d8255a109597b36d196d4f86703a
Reviewed-on: https://go-review.googlesource.com/23954
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Generate package comment in alldocs.go using line comments rather than
general comments. This scales better, general comments cannot contain the
"*/" character sequence. Line comments do not have any restrictions on
the comment text that can be contained.
Remove the dependency on sed, which is not cross-platform, not go-gettable
external command.
Remove trailing whitespace from usage string in test.go. It's unnecessary.
Fixes#16030.
Change-Id: I3c0bc9955e7c7603c3d1fb4878218b0719d02e04
Reviewed-on: https://go-review.googlesource.com/23968
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Instead of doing:
x = input
one round of aes on x
x ^= seed
two rounds of aes on x
Do:
x = input
x ^= seed
three rounds of aes on x
This change provides some additional seed-dependent scrambling
which should help prevent collisions.
Change-Id: I02c774d09c2eb6917cf861513816a1024a9b65d7
Reviewed-on: https://go-review.googlesource.com/23577
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
On systems that support the POSIX.1-2008 waitid function, we can use it
to block until a wait will succeed. This avoids a possible race
condition: if a program calls p.Kill/p.Signal and p.Wait from two
different goroutines, then it is possible for the wait to complete just
before the signal is sent. In that case, it is possible that the system
will start a new process using the same PID between the wait and the
signal, causing the signal to be sent to the wrong process. The
Process.isdone field attempts to avoid that race, but there is a small
gap of time between when wait returns and isdone is set when the race
can occur.
This CL avoids that race by using waitid to wait until the process has
exited without actually collecting the PID. Then it sets isdone, then
waits for any active signals to complete, and only then collects the PID.
No test because any plausible test would require starting enough
processes to recycle all the process IDs.
Update #13987.
Update #16028.
Change-Id: Id2939431991d3b355dfb22f08793585fc0568ce8
Reviewed-on: https://go-review.googlesource.com/23967
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
+ panic with explicit error if no file set it provided
(Not providing a file set is invalid use of the API; panic
is the appropriate action rather than returning an error.)
Fixes#16018.
Change-Id: I207f5b2a2e318d65826bdd9522fce46d614c24ee
Reviewed-on: https://go-review.googlesource.com/24010
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Make the documentation for `go get` match the documentation for `go
install`, since `go get` essentially invokes `go install`.
Update #15825.
Change-Id: I374d80efd301814b6d98b86b7a4a68dd09704c92
Reviewed-on: https://go-review.googlesource.com/23925
Reviewed-by: Andrew Gerrand <adg@golang.org>
This patch updates the doc about comments whitespace for the
encoding/csv package to reflect that leading whitespace before
the hash will treat the line as not a comment.
Fixes#13775.
Change-Id: Ia468c75b242a487b4b2b4cd3d342bfb8e07720ba
Reviewed-on: https://go-review.googlesource.com/23302
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When setting $pc, gdb does a backtrace using the current value of $sp,
and it may complain if $sp does not match that $pc (although the
assignment went through successfully).
This happens with ARM SSA backend: when setting $pc it prints
> Cannot access memory at address 0x0
As well as occasionally on MIPS64:
> warning: GDB can't find the start of the function at 0xc82003fe07.
> ...
Setting $sp before setting $pc makes it happy.
Change-Id: Idd96dbef3e9b698829da553c6d71d5b4c6d492db
Reviewed-on: https://go-review.googlesource.com/23940
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
The generated code for interface stubs sometimes just messes
with a few of the args and then tail-calls to the target routine.
The args that aren't explicitly modified appear to not be used.
But they are used, by the thing we're tail calling.
Fixes#16016
Change-Id: Ib9b3a8311bb714a201daee002885fcb59e0463fa
Reviewed-on: https://go-review.googlesource.com/23960
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
The combination of https://golang.org/cl/23650 and
https://golang.org/cl/23675 did not work--they were tested separately
but not together.
The problem was that 23650 introduced deferred argument checking, and
the deferred function loses the type that 23675 started requiring. The
fix is to go back to using an empty interface type in a deferred
argument check.
No new test required--fixes broken build.
Change-Id: I5ea023c5aed71d70e57b11c4551242d3ef25986d
Reviewed-on: https://go-review.googlesource.com/23961
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
When cgo writes a _cgoCheckPointerN function to handle unsafe.Pointer,
use the function's argument type rather than interface{}. This permits
type errors to be detected at build time rather than run time.
Fixes#13830.
Change-Id: Ic7090905e16b977e2379670e0f83640dc192b565
Reviewed-on: https://go-review.googlesource.com/23675
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
getAbbrs looks like it is checking each month looking for a change
in the time zone abbreviation, but starts in Dec of the previous year
and skips the month of February because of the overflow rules for
AddDate. Changing the day to 1 starts at Jan 1 and tries all months
in the current year. This isn't very important or likely to change
output as zones usually span several months. Discovered when
looking into time.AddDate behavior when adding months.
Change-Id: I685254c8d21c402ba82cc4176e9a86b64ce8f7f7
Reviewed-on: https://go-review.googlesource.com/23322
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Change-Id: I68d66fccf9cc8f7137c92b94820ce7d6f478a185
Reviewed-on: https://go-review.googlesource.com/23310
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The test TestGoGetHTTPS404 downloads a package that does not build on
every OS, so change it to only run where the package builds. It's not
great for the test to depend on an external package, but this is an
improvement on the current situation.
Fixes#15644.
Change-Id: I1679cee5ab1e61a5b26f4ad39dc8a397fbc0da69
Reviewed-on: https://go-review.googlesource.com/23920
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
- 64x signed right shift was wrong for shift larger than 0x80000000.
- for Lsh-followed-by-Rsh, the intermediate value should be full int
width, so when it is spilled MOVW should be used.
- use RET for RetJmp, so the assembler can take case of restoring LR
for non-leaf case.
- reserve R9 in dynlink mode. R9 is used for GOT by the assembler.
Progress on SSA backend for ARM. Still not complete.
Updates #15365.
Change-Id: I3caca256b92ff7cf96469da2feaf4868a592efc5
Reviewed-on: https://go-review.googlesource.com/23793
Reviewed-by: David Chase <drchase@google.com>
We want tuple-reading ops immediately follow tuple-generating op, so
that tuple values will not be spilled/copied.
The mechanism introduced in the previous CL cannot really avoid tuples
interleaving. In this CL we always emit tuple and their selectors together.
Maybe remove the tuple scores if it does not help on performance (todo).
Also let tighten not move tuple-reading ops across blocks.
In the previous CL a special case of regenerating flags with tuple-reading
pseudo-op is added, but it did not cover end-of-block case. This is fixed
in this CL and the condition is generalized.
Progress on SSA backend for ARM. Still not complete.
Updates #15365.
Change-Id: I8980b34e7a64eb98153540e9e19a3782e20406ff
Reviewed-on: https://go-review.googlesource.com/23792
Reviewed-by: David Chase <drchase@google.com>
This matches the behavior of the legacy backend.
Fixes#15975 (if this is the intended behavior)
Change-Id: Id277959069b8b8bf9958fa8f2cbc762c752a1a19
Reviewed-on: https://go-review.googlesource.com/23820
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
R13 needs to be set to g because C code may have clobbered R13.
Fixes#16006.
Change-Id: I66311fe28440e85e589a1695fa1c42416583b4c6
Reviewed-on: https://go-review.googlesource.com/23910
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Updates x/net/http2 to git rev 313cf39 for CLs 23812 and 23880:
http2: GotFirstResponseByte hook should only fire once
http2: fix data race on pipe
Fixes#16000
Change-Id: I9c3f1b2528bbd99968aa5a0529ae9c5295979d1d
Reviewed-on: https://go-review.googlesource.com/23881
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
Post-liveness fix, the slices on both sides can now be
indirects of & variables. The cgen code handles those
cases just fine.
Fixes#15988
Change-Id: I378ad1d5121587e6107a9879c167291a70bbb9e4
Reviewed-on: https://go-review.googlesource.com/23863
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
go_android_exec is looking for "exitcode=" to decide the result
of running a test. The heap dump test nondeterministically prints
"finalized" right at the end of the test. When the timing is just
right, we print "finalizedexitcode=0" and confuse go_android_exec.
This failure happens occasionally on the android builders.
Change-Id: I4f73a4db05d8f40047ecd3ef3a881a4ae3741e26
Reviewed-on: https://go-review.googlesource.com/23861
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Make sure auto names don't conflict with function names. Before this CL,
we confused name a.len (the len field of the slice a) with a.len (the function
len declared on a).
Fixes#15961
Change-Id: I14913de697b521fb35db9a1b10ba201f25d552bb
Reviewed-on: https://go-review.googlesource.com/23789
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
On Windows, "export" doesn't mean anything, but Windows users are the
most likely to see this message.
Fixes#15977
Change-Id: Ib09ca08a7580713cacb65d0cdc43730765c377a8
Reviewed-on: https://go-review.googlesource.com/23840
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fixes#15948
Change-Id: Idd79859b3e98d61cd4e3ef9caa5d3b2524fd026a
Reviewed-on: https://go-review.googlesource.com/23810
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fixes#15960
Change-Id: I7503f6ede33e6a1a93cee811d40f7b297edf47bc
Reviewed-on: https://go-review.googlesource.com/23811
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Machine supports (or the runtime simulates in soft float mode)
(u)int32<->float conversions. The frontend rewrites int64<->float
conversions to call to runtime function.
For int64->float32 conversion, the frontend generates
. . AS u(100) l(10) tc(1)
. . . NAME-main.~r1 u(1) a(true) g(1) l(9) x(8+0) class(PPARAMOUT) f(1) float32
. . . CALLFUNC u(100) l(10) tc(1) float32
. . . . NAME-runtime.int64tofloat64 u(1) a(true) x(0+0) class(PFUNC) tc(1) used(true) FUNC-func(int64) float64
The CALLFUNC node has type float32, whereas runtime.int64tofloat64
returns float64. The legacy backend implicitly makes a float64->float32
conversion. The SSA backend does not do implicit conversion, so we
insert an explicit CONV here.
All cmd/compile/internal/gc/testdata/*_ssa.go tests passed.
Progress on SSA for ARM. Still not complete.
Update #15365.
Change-Id: I30937c8ff977271246b068f48224693776804339
Reviewed-on: https://go-review.googlesource.com/23652
Reviewed-by: Keith Randall <khr@golang.org>
This CL adds support of Div, Mod, Convert, GetClosurePtr and 64-bit indexing
support to SSA backend for ARM.
Add tests for 64-bit indexing to cmd/compile/internal/gc/testdata/string_ssa.go.
Tests cmd/compile/internal/gc/testdata/*_ssa.go passed, except compound_ssa.go
and fp_ssa.go.
Progress on SSA for ARM. Still not complete. Essentially the only unsupported
part is floating point.
Updates #15365.
Change-Id: I269e88b67f641c25e7a813d910c96d356d236bff
Reviewed-on: https://go-review.googlesource.com/23542
Reviewed-by: David Chase <drchase@google.com>
We used to check time at the point of the defer statement. This change
fixes cgo to check them when the deferred function is executed.
Fixes#15921.
Change-Id: I72a10e26373cad6ad092773e9ebec4add29b9561
Reviewed-on: https://go-review.googlesource.com/23650
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
The existing implementation for path collision resolution would
incorrectly determine that:
example.org/aa
collides with:
example.org/a
This change splits by slash rather than comparing on a byte-by-byte
basis.
Fixes: #15947
Change-Id: I18b3aaafbc787c81253203cf1328bb3c4420a0c4
Reviewed-on: https://go-review.googlesource.com/23732
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Adding a .def suffix for DWARF info collided with the DWARF info,
without the suffix, for a method named def. Change the suffix to ..def
instead.
Fixes#15926.
Change-Id: If1bf1bcb5dff1d7f7b79f78e3f7a3bbfcd2201bb
Reviewed-on: https://go-review.googlesource.com/23733
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Any defer in a shared object crashed when GOARCH=386. This turns out to be two
bugs:
1) Calls to morestack were not processed to be PIC safe (must have been
possible to trigger this another way too)
2) jmpdefer needs to rewind the return address of the deferred function past
the instructions that load the GOT pointer into BX, not just past the call
Bug 2) requires re-introducing the a way for .s files to know when they are
being compiled for dynamic linking but I've tried to do that in as minimal
a way as possible.
Fixes#15916
Change-Id: Ia0d09b69ec272a176934176b8eaef5f3bfcacf04
Reviewed-on: https://go-review.googlesource.com/23623
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes#15933
Change-Id: I2cd6365e6d0ca1cafdc812fbfaaa55aa64b2b289
Reviewed-on: https://go-review.googlesource.com/23731
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This has been inaccurate since https://golang.org/cl/6048047.
Fixes#15317.
Change-Id: If93d2161f51ccb91912cb94a35318cf33f4d526a
Reviewed-on: https://go-review.googlesource.com/23691
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This serves as an example of table-driven benchmarks which are analoguous to the common pattern for table-driven tests.
Change-Id: I47f94c121a7117dd1e4ba03b3f2f8bcb5da38063
Reviewed-on: https://go-review.googlesource.com/23470
Run-TryBot: Marcel van Lohuizen <mpvl@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Skip setgroups only for one particular case: GidMappings != nil and
GidMappingsEnableSetgroup == false and list of supplementary groups is
empty.
This patch returns pre-1.5 behavior for simple exec and still allows to
use GidMappings with non-empty Credential.
Change-Id: Ia91c77e76ec5efab7a7f78134ffb529910108fc1
Reviewed-on: https://go-review.googlesource.com/23524
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL documents that StructOf currently does not generate wrapper
methods for embedded fields.
Updates #15924
Change-Id: I932011b1491d68767709559f515f699c04ce70d4
Reviewed-on: https://go-review.googlesource.com/23681
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Fixes the darwin/arm builder (I hope)
Change-Id: I8a3502a1cdd468d4bf9a1c895754ada420b305ce
Reviewed-on: https://go-review.googlesource.com/23684
Run-TryBot: Elias Naur <elias.naur@gmail.com>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Also fix a mistake in previous CL about x8 and x16 shifts:
the shift needs ZeroExt.
Progress on SSA for ARM. Still not complete.
Updates #15365.
Change-Id: Ibc352760023d38bc6b9c5251e929fe26e016637a
Reviewed-on: https://go-review.googlesource.com/23486
Reviewed-by: David Chase <drchase@google.com>
Auto-generate register masks and load them through Config.
Passed toolstash -cmp on AMD64.
Tests phi_ssa.go and regalloc_ssa.go in cmd/compile/internal/gc/testdata
passed on ARM.
Updates #15365.
Change-Id: I393924d68067f2dbb13dab82e569fb452c986593
Reviewed-on: https://go-review.googlesource.com/23292
Reviewed-by: David Chase <drchase@google.com>
Introduce dec64 rules to (generically) decompose 64-bit integer on
32-bit architectures. 64-bit integer is composed/decomposed with
Int64Make/Hi/Lo ops, as for complex types.
The idea of dealing with Add64 is the following:
(Add64 (Int64Make xh xl) (Int64Make yh yl))
->
(Int64Make
(Add32withcarry xh yh (Select0 (Add32carry xl yl)))
(Select1 (Add32carry xl yl)))
where Add32carry returns a tuple (flags,uint32). Select0 and Select1
read the first and the second component of the tuple, respectively.
The two Add32carry will be CSE'd.
Similarly for multiplication, Mul32uhilo returns a tuple (hi, lo).
Also add support of KeepAlive, to fix build after merge.
Tests addressed_ssa.go, array_ssa.go, break_ssa.go, chan_ssa.go,
cmp_ssa.go, ctl_ssa.go, map_ssa.go, and string_ssa.go in
cmd/compile/internal/gc/testdata passed.
Progress on SSA for ARM. Still not complete.
Updates #15365.
Change-Id: I7867c76785a456312de5d8398a6b3f7ca5a4f7ec
Reviewed-on: https://go-review.googlesource.com/23213
Reviewed-by: Keith Randall <khr@golang.org>
The comment on http.Request.Context says that the context
is canceled when the client's connection closes even though
this has not been implemented. See #15927
Change-Id: I50b68638303dafd70f77f8f778e6caff102d3350
Reviewed-on: https://go-review.googlesource.com/23672
Reviewed-by: Andrew Gerrand <adg@golang.org>
When a wrapper method calls the real implementation, it's not possible to use a
tail call when dynamic linking on ppc64le. The bad scenario is when a local
call is made to the wrapper: the wrapper will call the implementation, which
might be in a different module and so set the TOC to the appropriate value for
that module. But if it returns directly to the wrapper's caller, nothing will
reset it to the correct value for that function.
Change-Id: Icebf24c9a2a0a9a7c2bce6bd6f1358657284fb10
Reviewed-on: https://go-review.googlesource.com/23468
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Updates golang.org/x/net/route to rev fac978c for:
- route: fix typos in test
Change-Id: I35de1d3f8e887c6bb5fe50e7299f2fc12e4426de
Reviewed-on: https://go-review.googlesource.com/23660
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change causes TLS handshake messages to be buffered and written in
a single Write to the underlying net.Conn.
There are two reasons to want to do this:
Firstly, it's slightly preferable to do this in order to save sending
several, small packets over the network where a single one will do.
Secondly, since 37c28759ca errors from
Write have been returned from a handshake. This means that, if a peer
closes the connection during a handshake, a “broken pipe” error may
result from tls.Conn.Handshake(). This can mask any, more detailed,
fatal alerts that the peer may have sent because a read will never
happen.
Buffering handshake messages means that the peer will not receive, and
possibly reject, any of a flow while it's still being written.
Fixes#15709
Change-Id: I38dcff1abecc06e52b2de647ea98713ce0fb9a21
Reviewed-on: https://go-review.googlesource.com/23609
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Andrew Gerrand <adg@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Updates x/net/http2 to git rev 6bdd4be4 for CL 23526:
http2: GotFirstResponseByte hook should only fire once
Also updated the trace hooks test to verify that all trace hooks are called
exactly once except ConnectStart/End, which may be called multiple times (due
to happy-eyeballs).
Fixes#15777
Change-Id: Iea5c64eb322b58be27f9ff863b3a6f90e996fa9b
Reviewed-on: https://go-review.googlesource.com/23527
Reviewed-by: Andrew Gerrand <adg@golang.org>
Some tests cannot build for Android; use build tags and stubs to
skip them.
For #15919
Change-Id: Ieedcb73d4cabe23c3775cfb1d44c1276982dccd9
Reviewed-on: https://go-review.googlesource.com/23634
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
If memory might be unaligned, zero it one byte at a time
instead of 4 bytes at a time.
Fixes#15902
Change-Id: I4eff0840e042e2f137c1a4028f08793eb7dfd703
Reviewed-on: https://go-review.googlesource.com/23587
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
Since CL 23620, TestAssembly is failing on Plan 9.
In CL 23620, the process environment is passed to 'go tool compile'
after setting GOARCH. On Plan 9, if GOARCH is already set in the
process environment, it would take precedence. On Unix, it works
as expected because the first GOARCH found takes precedence.
This change uses the mergeEnvLists function from cmd/go/main.go
to merge the two environment lists such that variables with the
same name in "in" replace those in "out".
Change-Id: Idee22058343932ee18666dda331c562c89c33507
Reviewed-on: https://go-review.googlesource.com/23593
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: David du Colombier <0intro@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
For symmetry with Cloneflags and it looks slightly weird because there
is syscall.Unshare method.
Change-Id: I3d710177ca8f27c05b344407f212cbbe3435094b
Reviewed-on: https://go-review.googlesource.com/23612
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
In particular, this stops the test failing when GOROOT and GOROOT_FINAL are
different.
Change-Id: Ibf6cc0a173f1d965ee8aa31eee2698b223f1ceec
Reviewed-on: https://go-review.googlesource.com/23620
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>