Since Go1.10, go test runs vet on the tests before executing them.
Moreover, the vet tool typechecks the package under analysis with
go/types before running. In Go1.10, a typechecking failure just caused
a warning to be printed. In Go1.11, a typechecking failure will cause
vet to exit with a fatal error (see Issue #21287).
This means that starting with Go1.11, tests that don't typecheck will
fail immediately. This would not normally be an issue, since a test
that doesn't typecheck shouldn't even compile, and it should already
be broken.
Unfortunately, there's a bug in gc that makes it accept programs with
unused variables inside a closure (Issue #3059). This means that a
test with an unused variable inside a closure, that compiled and
passed in Go1.10, will fail in the typechecking step of vet starting
with Go1.11.
Explain this in the 1.11 release notes.
Fixes#26109
Change-Id: I970c1033ab6bc985d8c64bd24f56e854af155f96
Reviewed-on: https://go-review.googlesource.com/121455
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This reverts commit c99300229d.
The original CL skipped the lldb test if it couldn't read compressed
DWARF, but lldb can never read compressed DWARF, so this effectively
disabled this test unconditionally.
The previous commit disabled DWARF compression for this test, so the
test now works on its own merits again. This CL reverts the change to
skip the test so we don't simply mask lldb failures.
Updates #25925.
Change-Id: I3e1c787b658257b542c3c70807065dde9cfe05ee
Reviewed-on: https://go-review.googlesource.com/124386
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
lldb doesn't support compressed DWARF, so right now we're just always
skipping the lldb test. This CL makes the test run again by disabling
compressed DWARF just for this test.
Updates #25925.
Change-Id: Ib9ddc442305fe6d37060d48f36bc4458b6fd8c86
Reviewed-on: https://go-review.googlesource.com/124385
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Autos must be kept if their address reaches the control value of a
block. We didn't see this before because it is rare for an auto's
address to reach a control value without also reaching a phi or
being written to memory. We can probably optimize away the
comparisons that lead to this scenario since autos cannot alias
with pointers from elsewhere, however for now we take the
conservative approach and just ensure the auto is properly
initialised if its address reaches a control value.
Fixes#26407.
Change-Id: I02265793f010a9e001c3e1a5397c290c6769d4de
Reviewed-on: https://go-review.googlesource.com/124335
Reviewed-by: David Chase <drchase@google.com>
The original cmd/go tests were tiny shell scripts
written against a library of shell functions.
They were okay to write but difficult to run:
you couldn't select individual tests (with -run)
they didn't run on Windows, they were slow, and so on.
CL 10464 introduced go_test.go's testgo framework
and later CLs translated the test shell script over to
individual go tests. This let us run tests selectively,
run tests on Windows, run tests in parallel, isolate
different tests, and so on. It was a big advance.
The tests had always been awkward to write.
Here was the first test in test.bash:
TEST 'file:line in error messages'
# Test that error messages have file:line information at beginning of
# the line. Also test issue 4917: that the error is on stderr.
d=$(TMPDIR=/var/tmp mktemp -d -t testgoXXX)
fn=$d/err.go
echo "package main" > $fn
echo 'import "bar"' >> $fn
./testgo run $fn 2>$d/err.out || true
if ! grep -q "^$fn:" $d/err.out; then
echo "missing file:line in error message"
cat $d/err.out
ok=false
fi
rm -r $d
The final Go version of this test was:
func TestFileLineInErrorMessages(t *testing.T) {
tg := testgo(t)
defer tg.cleanup()
tg.parallel()
tg.tempFile("err.go", `package main; import "bar"`)
path := tg.path("err.go")
tg.runFail("run", path)
shortPath := path
if rel, err := filepath.Rel(tg.pwd(), path); err == nil && len(rel) < len(path) {
shortPath = rel
}
tg.grepStderr("^"+regexp.QuoteMeta(shortPath)+":", "missing file:line in error message")
}
It's better but still quite difficult to skim.
This CL introduces a new facility meant as a successor to the testgo
approach that brings back the style of writing tests as little scripts,
but they are now scripts in a built-for-purpose shell-like language,
not bash itself. In this new form, the test above is a single file,
testdata/script/fileline.txt:
# look for short, relative file:line in error message
! go run ../../gopath/x/y/z/err.go
stderr ^..[\\/]x[\\/]y[\\/]z[\\/]err.go:
-- ../x/y/z/err.go --
package main; import "bar"
The file is a txtar text archive (see CL 123359) in which the leading comment
is the test script and the files are the initial state of the temporary file
system where the script runs.
Each script runs as a subtest, so that they can still be selected individually.
The scripts are kept isolated from each other by default,
so all script subtests are treated as parallel tests, for the
testing package to run in parallel. Even for the 15 tests in
this CL, that cuts the time for TestScript from 5.5s to 2.5s.
The scripts do not have access to the cmd/go source directory,
nor to cmd/go/testdata, so they are prevented from creating temporary
files in those places or modifying existing ones. (Many existing tests
scribble in testdata, unfortunately, especially testdata/pkg when
they run builds with GOPATH=testdata.)
This CL introduces the script facility and converts 15 tests.
The txtar archive form will allow us to delete the large trees of trivial
files in testdata; a few are deleted in this CL.
See testdata/script/README for details and a larger conversion example.
As part of converting testdata/script/test_badtest.txt,
I discovered that 'go test' was incorrectly printing a FAIL line
to stderr (not stdout) in one corner case. This CL fixes that
to keep the test passing.
Future CLs will convert more tests.
Change-Id: I11aa9e18dd2d4c7dcd8e310dbdc6a1ea5f7e54c1
Reviewed-on: https://go-review.googlesource.com/123577
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is close to a complete rewrite, as the content was pretty old.
The CL includes links to the Wiki for information about companies
using Go, a new section about IDEs and editors¹, and a restatement
of the foreign function interface story. It also modernizes and
expands a little on the use of Go inside Google.
¹ Ed is the standard editor.
Change-Id: I5e54aafa53d00d86297b2691960a376b40f6225b
Reviewed-on: https://go-review.googlesource.com/123922
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The vet action assumes that a.Deps[0] is the compilation action for
which vet information should be generated. However, when using
-linkshared, the action graph is built with a ModeBuggyInstall action
to install the shared library built from the compilation action.
Adjust the set up of the vet action accordingly. Also don't clean up
the working directory after completing the buggy install.
Updates #26400
Change-Id: Ia51f9f6b8cde5614a6f2e41b6207478951547770
Reviewed-on: https://go-review.googlesource.com/124275
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Docker sets $HOME to / when running with a UID that doesn't exist within
the container. This not uncommon on CI servers.
Fixes#26280
Change-Id: Ic7ff62b41403fe6e7c0cef12814667ef73f6c954
Reviewed-on: https://go-review.googlesource.com/122487
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Most programs seem to accept a relative temp dir, as weird as that might be.
Also, the meaning of relative is a little more fluid on Windows:
TMP=\temp is relative (to the current drive) but will work well enough.
Also, Windows GetTempPath automatically converts a relative
%TMP% into an absolute path, so we'd be imposing different
behavior for GOTMPDIR vs TMP.
It seems easier and more consistent to just impose the obvious
meaning than to add an error we can only implement some of
the time.
Originally got here because "cmd/go:" should be"go:" in error message,
but the error message is gone now.
Fixes#23264.
Change-Id: I3c3fb801cbd5e652364f1f62bb3881e9317e3581
Reviewed-on: https://go-review.googlesource.com/123876
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Several adjustments:
1) When encoding the FileHeader for a directory, explicitly set all of the sizes
to zero regardless of their prior values. These values are currently populated
by FileInfoHeader as it calls os.FileInfo.Size regardless of whether the file is
a directory or not. We avoid fixing FileInfoHeader now as it is too late in the
release cycle (see #24082).
We silently adjust slightly wrong FileHeader fields as opposed to returning
an error because the CreateHeader method already does such mutations
(e.g., for UTF-8 detection, data descriptor, etc).
2) Have dirWriter.Write only return an error if some number of bytes are written.
Some code still call Write for both normal files and directories, but just pass
an empty []byte to Write for directories.
Change-Id: I85492a31356107fcf76dc89ceb00a28853754289
Reviewed-on: https://go-review.googlesource.com/124155
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When x509ignoreCN=1 is present in GODEBUG, ignore the deprecated Common
Name field. This will let people test a behavior we might make the
default in the future, and lets a final class of certificates avoid the
NameConstraintsWithoutSANs error.
Updates #24151
Change-Id: I1c397aa1fa23777b9251c311d02558f9a5bdefc0
Reviewed-on: https://go-review.googlesource.com/123695
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
The Common Name is used as a hostname when there are no Subject
Alternative Names, but it is not restricted by name constraints. To
protect against a name constraints bypass, we used to require SANs for
constrained chains. See the NameConstraintsWithoutSANs error.
This change ignores the CN when it does not look like a hostname, so we
can avoid returning NameConstraintsWithoutSANs.
This makes it possible to validate certificates with non-hostname CN
against chains that use name constraints to disallow all names, like the
Estonian IDs.
Updates #24151
Change-Id: I798d797990720a01ad9b5a13336756cc472ebf44
Reviewed-on: https://go-review.googlesource.com/123355
Reviewed-by: Adam Langley <agl@golang.org>
TARGET_OS_OSX is the right macro, but it also was only introduced
in 1.12. For 1.11 and earlier a reasonable substitution is
TARGET_OS_IPHONE == 0.
Update #24161
Update #26355
Change-Id: I5f43c463d14fada9ed1d83cc684c7ea05d94c5f3
Reviewed-on: https://go-review.googlesource.com/124075
Run-TryBot: Keith Randall <khr@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Describe the problem as a bug, since it is not implied by the rest of
the pointer passing rules, and it may be possible to fix it.
Updates #19928
Change-Id: I2d336e7336b2a215c0b8cf909a203201ef1b054e
Reviewed-on: https://go-review.googlesource.com/123658
Reviewed-by: Austin Clements <austin@google.com>
The test TestNewReleaseRebuildsStalePackagesInGOPATH is not run in
short mode, so people tend to not notice when it fails. It was failing
due to the build cache. Make it pass again by 1) changing it to modify
the package in a way visible to the compiler, so that the change is
not hidden by caching; 2) accepting "not installed but available in
build cache" as always being a valid reason for a stale package, as go
list does not try to figure out an underlying reason for why a package
is stale when it finds it in the build cache but not installed.
Updates #24436
Change-Id: Iaeaa298f153451ec913a653dd4e6da79a33055bb
Reviewed-on: https://go-review.googlesource.com/123815
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Profile's Mapping field is currently populated by reading /proc/self/maps.
On systems where /proc/self/maps is not available, the profile generated
by Go's runtime will not have any Mapping entry. Pprof command then adds
a fake entry and links all Location entries in the profile with the fake
entry to be used during symbolization.
a8644067d5/internal/driver/fetch.go (L437)
The fake entry is not enough to suppress the error or warning messages
pprof command produces. We need to tell pprof that Location entries are
symbolized already by Go runtime and pprof does not have to attempt to
perform further symbolization.
In #25743, we made Go runtime mark Mapping entries with HasFunctions=true
when all Location entries from the Mapping entries are successfully
symbolized. This change makes the Go runtime add a fake mapping entry,
otherwise the pprof command tool would add, and set the HasFunctions=true
following the same logic taken when the real mapping information is
available.
Updates #19790.
Fixes#26255. Tested pprof doesn't report the error message any more
for pure Go program.
Change-Id: Ib12b62e15073f5d6c80967e44b3e8709277c11bd
Reviewed-on: https://go-review.googlesource.com/123779
Run-TryBot: Hyang-Ah Hana Kim <hyangah@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Significant surgery done to the Versioning section, bringing it closer to
modern thinking.
Also add a question about constants.
Update #26107.
Change-Id: Icf70b7228503c6baaeab0b95ee3e6bee921575aa
Reviewed-on: https://go-review.googlesource.com/123918
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Changes are mostly about making more about now than about the past,
changing some verb tenses, and mentioning gollvm (which should
be pronounced "gollum" if you ask me).
Update #26107
Change-Id: I6c14f42b9fc2684259d4ba8bc149d7ec9bb83d15
Reviewed-on: https://go-review.googlesource.com/123917
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The old text was written when it was only 1 by default, which
changed a long time ago.
Also add a note that GOMAXPROCS does not limit the total
number of threads.
Change-Id: I104ccd7266d11335320a4d7f5671fb09ed641f88
Reviewed-on: https://go-review.googlesource.com/123916
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The test in CL 123715 doesn't work on iOS, it needs to use a different
version scheme to determine whether SecKeyAlgorithm and friends exist.
Restrict the old version test to OSX only.
The same problem occurs on iOS: the functions tested don't exist before
iOS 10. But we don't have builders below iOS 10, so it isn't a big issue.
If we ever get older builders, or someone wants to run all.bash on an
old iOS, they'll need to figure out the right incantation.
Update #24161
Update #26355
Change-Id: Ia3ace86b00486dc172ed00c0c6d668a95565bff7
Reviewed-on: https://go-review.googlesource.com/123959
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
See big comment in code.
Fixes#23921
Change-Id: I2dbd1acc2e9da07a71f9e0640aafe0c59a335627
Reviewed-on: https://go-review.googlesource.com/123875
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
In CL 122404, we change -replace syntax from => to =.
And we also need to change this and the tests.
Fixesgolang/go#26373.
Change-Id: I2d4e85e10c1578540cc7673b93d849270940d776
Reviewed-on: https://go-review.googlesource.com/123778
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Was supposed to be removed from CL 123757
Change-Id: I74405adab58be103f8e4a0c2405567f480a0e622
Reviewed-on: https://go-review.googlesource.com/123895
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The os.RemoveAll(tg.tempdir) was not a good idea.
Change-Id: I6f78cff887044186649cbf3ee04a58abdbcb71e2
Reviewed-on: https://go-review.googlesource.com/123757
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Before:
// Find returns a slice holding the text of the leftmost match in b of the regular expression.
// Match checks whether a textual regular expression matches a byte slice.
After:
// Match reports whether the byte slice b contains any match of the regular expression re.
The use of different wording for Find and Match always makes me think
that Match required the entire string to match while Find clearly allows
a substring to match.
This CL makes the Match wording correspond more closely to Find,
to try to avoid that confusion.
Change-Id: I97fb82d5080d3246ee5cf52abf28d2a2296a5039
Reviewed-on: https://go-review.googlesource.com/123736
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The linker's DWARF generation occasionally computes and attaches an
attribute X to a type even though the type's abbrev doesn't have the
specified attr. For example, the DW_TAG_subroutine_type abbrev entry
has no type attribute, but a type attr is given to it (wasting
memory). Similarly there are some places where a byte size attr is
added to a DIE whose abbrev lacks that attr. This patch trims away a
few of these not-needed attrs, saving some very tiny amount of memory.
Updates #26186
Change-Id: I69e853df468ac54b07772a614b4106d7c4dae01d
Reviewed-on: https://go-review.googlesource.com/123296
Reviewed-by: Heschi Kreinick <heschi@google.com>
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This permits specifying an ErrorHandler to customize the RoundTrip
error handling if the backend fails to return a response.
Fixes#22700Fixes#21255
Change-Id: I8879f0956e2472a07f584660afa10105ef23bf11
Reviewed-on: https://go-review.googlesource.com/77410
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Executing tests in src/cmd/go/internal/modfetch/codehost/git_test.go in enviroment
witout outside connectivity in to the internet results in tests failure:
2018/07/13 14:31:14 git clone --mirror https://vcs-test.golang.org/git/gitrepo1 /tmp/gitrepo-test-996701800/gitrepo2 in : exit status 128:
Cloning into bare repository '/tmp/gitrepo-test-996701800/gitrepo2'...
fatal: unable to access 'https://vcs-test.golang.org/git/gitrepo1/': Could not resolve host: vcs-test.golang.org
FAIL cmd/go/internal/modfetch/codehost 0.307s
Fixes#26007
Change-Id: Ia39d8b3215c920dad6c0c58ffabb0b2ab39bb55c
Reviewed-on: https://go-review.googlesource.com/123735
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
syscall/js does not allow []byte to be used in direct inputs to
its JavaScript manipulation methods since
bafe466a95.
Unfortunately, this use of a byte slice was missed, so any
uses of the WASM Roundtripper with a body will panic.
This ensures the byte slice is appropriately converted
before being passed to syscall.
Fixes#26349
Change-Id: I83847645d71ce310c1eee3decddbac990fae166b
GitHub-Last-Rev: 3914bda2ff
GitHub-Pull-Request: golang/go#26350
Reviewed-on: https://go-review.googlesource.com/123537
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Richard Musiol <neelance@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
According to RFC-3986, the sub-delims chars should not be escaped in
fragment.
So this change fixes current behavior a bit.
Fixes#19917
Change-Id: I1a8deb93255d979532f75bae183c3fb53a05d395
Reviewed-on: https://go-review.googlesource.com/61650
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The test uses functions from C that were introduced in OSX 1.12.
Include stubs for those functions when compiling for 1.11 and earlier.
This test really a compile-time test, it doesn't matter much what the
executed code actually does.
Use a nasty #define hack to work around the fact that cgo doesn't
support static global variables.
Update #24161Fixes#26355
Change-Id: Icf6f7bc9b6b36cacc81d5d0e033a2ebaff7e0298
Reviewed-on: https://go-review.googlesource.com/123715
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Many parts of the FAQ are dusty and need cleaning up.
This is the first of a series of changes to bring it up to date.
Since it was first written at the time of release, some of the
ideas and background have changed, and some historical
remarks are largely irrelevant now.
Update #26107.
Change-Id: I1f36df7d8ecc8a1a033d5ac4fa1edeece25ed6b4
Reviewed-on: https://go-review.googlesource.com/123496
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The existing implementation stops recording type information once it
encounters an error. This results in missing type information that is
needed by various tools. This change handles a few commonly encountered
cases by continuing to check subtrees after errors. Also, add tests for
cases where the package fails to type-check.
Updates #22467
Change-Id: I1bb48d4cb8ae5548dca63bdd785ea2f69329e92b
Reviewed-on: https://go-review.googlesource.com/123578
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alan Donovan <adonovan@google.com>
Updates bundled x/net/http2 to git rev d0887baf81f4 for:
http2: ignore unknown 1xx responses like HTTP/1
https://golang.org/cl/123615
http2: fix bug in earlier CL 123615
https://golang.org/cl/123675
Also along for the ride, but without any effect:
http2: export a field of an internal type for use by net/http
https://golang.org/cl/123656Fixes#26189
Updates #17739
Change-Id: I1955d844d74113efbcbbdaa7d7a7faebb2225b45
Reviewed-on: https://go-review.googlesource.com/123676
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL fixes up tests from the x/vgo repo that are failing
on some of the builders.
It will be submitted together with CL 123576.
Change-Id: I6bec81a93ad4f7116e8edc8c15beafa25747530c
Reviewed-on: https://go-review.googlesource.com/123580
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This CL corresponds to CL 123361, the final manual CL in that repo,
making this the final manual sync.
All future commits will happen in this repo (the main Go repo),
and we'll update x/vgo automatically with a fixed patch+script.
Change-Id: I572243309c1809727604fd704705a23c30e85d1a
Reviewed-on: https://go-review.googlesource.com/123576
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>