The compiler allows code to have multiple differently-typed views of a
single argument. For instance, if we have
func f(x float64) {
y := *(*int64)(unsafe.Pointer(&x))
...
}
Then in SSA we get two OpArg ops, one with float64 type and one with
int64 type.
The compiler will try to reuse argument slots for spill slots. It
checks that the argument slot is dead by consulting an interference
graph.
When building the interference graph, we normally ignore cross-type
edges because the values on either end of that edge can't be allocated
to the same slot. (This is just a space-saving optimization.) This
rule breaks down when one of the values is an argument, because of the
multiple views described above. If we're spilling a float64, it is not
enough that the float64 version of x is dead; the int64 version of x
has to be dead also.
Remove the optimization of not recording interference edges if types
don't match. That optimization is incorrect if one of the values
connected by the edge is an argument.
Fixes#23522
Change-Id: I361f85d80fe3bc7249014ca2c3ec887c3dc30271
Reviewed-on: https://go-review.googlesource.com/89335
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
A Select Op could produce a value with upper 32 bits NOT zeroed,
for example, Div32 is lowered to (Select0 (DIVL x y)).
In theory, we could look into the argument of a Select to decide
whether the upper bits are zeroed. As it is late in release cycle,
just disable this optimization for Select for now.
Fixes#23305.
Change-Id: Icf665a2af9ccb0a7ba0ae00c683c9e349638bf85
Reviewed-on: https://go-review.googlesource.com/85736
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
My previous fix for issue 23179 was incomplete; it turns out that if
an unnamed parameter is below a specific size threshold, it gets
register-promoted away by the compiler (hence not encountered during
some parts of DWARF inline info processing), but if it is sufficiently
large, it is allocated to the stack as a named variable and treated as
a regular parameter by DWARF generation. Interestingly, something in
the ppc64le build of k8s causes an unnamed parameter to be retained
(where on amd64 it is deleted), meaning that this wasn't caught in my
amd64 testing.
The fix is to insure that "_" params are treated in the same way that
"~r%d" return temps are when matching up post-optimization inlined
routine params with pre-inlining declarations. I've also updated the
test case to include a "_" parameter with a very large size, which
also triggers the bug on amd64.
Fixes#23179.
Change-Id: I961c84cc7a873ad3f8f91db098a5e13896c4856e
Reviewed-on: https://go-review.googlesource.com/84975
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
The helper routine for returning pre-inlining parameter declarations
wasn't properly handling the case where you have more than one
parameter named "_" in a function signature; this triggered a map
collision later on when the function was inlined and DWARF was
generated for the inlined routine instance.
Fixes#23179.
Change-Id: I12e5d6556ec5ce08e982a6b53666a4dcc1d22201
Reviewed-on: https://go-review.googlesource.com/84755
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This allows errchk to be used with "go vet" output (as opposed to "go tool vet").
Change-Id: I0009a53c9cb74accd5bd3923c137d6dbf9e46326
Reviewed-on: https://go-review.googlesource.com/83836
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We can't currently inline functions that contain closures anyway, so
just delete this budgeting code for now. Re-enable once we can (if
ever) inline functions with nested closures.
Updates #15561.
Fixes#23093.
Change-Id: Idc5f8e042ccfcc8921022e58d3843719d4ab821e
Reviewed-on: https://go-review.googlesource.com/83538
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The package unsafe docs say it's safe to convert an unsafe.Pointer to
uintptr in the argument list to an assembly function, but it was
erroneously only detecting normal pointers converted to unsafe.Pointer
and then to intptr.
Fixes#23051.
Change-Id: Id1be19f6d8f26f2d17ba815191717d2f4f899732
Reviewed-on: https://go-review.googlesource.com/82817
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Pointer arithemetic is done mod 2^32 on 386, so we can just
drop the high bits of any large constant offsets.
The bounds check will make sure wraparounds are never observed.
Fixes#21655
Change-Id: I68ae5bbea9f02c73968ea2b21ca017e5ecb89223
Reviewed-on: https://go-review.googlesource.com/82675
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Make sure that when we're assigning to a map, we evaluate the
right-hand side before we attempt to insert into the map.
We used to evaluate the left-hand side to a pointer-to-slot-in-bucket
(which as a side effect does len(m)++), then evaluate the right-hand side,
then do the assignment. That clearly isn't correct when the right-hand side
might panic.
Fixes#22881
Change-Id: I42a62870ff4bf480568c9bdbf0bb18958962bdf0
Reviewed-on: https://go-review.googlesource.com/81817
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This test was added recently as a regress test for the spec relaxation
in #9060, but doesn't work correctly yet. Disable for now to fix noopt
builders.
Updates #22444.
Change-Id: I45c521ae0da7ffb0c6859d6f7220c59828ac6149
Reviewed-on: https://go-review.googlesource.com/81775
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The DWARF inline info generation hooks weren't properly
handling unused auto vars in certain cases, triggering an assert (now
fixed). Also with this change, introduce a new autom "flavor" to
use for autom entries that are added to insure that a specific
auto type makes it into the linker (this is a follow-on to the fix
for 22941).
Fixes#22962.
Change-Id: I7a2d8caf47f6ca897b12acb6a6de0eb25f5cac8f
Reviewed-on: https://go-review.googlesource.com/81557
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Per the decision for #14844, index expressions that are non-constant
shifts where the LHS operand is representable as an int are now valid.
Fixes#21693.
Change-Id: Ifafad2c0c65975e0200ce7e28d1db210e0eacd9d
Reviewed-on: https://go-review.googlesource.com/81277
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The code that generates the list of DWARF variables for a function
(params and autos) will emit a "no-location" entry in the DWARF for a
user var that appears in the original pre-optimization version of the
function but is no longer around when optimization is complete. The
intent is that if a GDB user types "print foo" (where foo has been
optimized out), the response will be "<optimized out>" as opposed to
"there is no such variable 'foo'). This change fixes said code to
include vars on the autom list for the function, to insure that the
type symbol for the variable makes it to the linker.
Fixes#22941.
Change-Id: Id29f1f39d68fbb798602dfd6728603040624fc41
Reviewed-on: https://go-review.googlesource.com/81415
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
ORANGE node's Right node is the expression it is ranging over,
which is evaluated before the loop. In the escape analysis,
we should walk this node without loop depth incremented.
Fixes#21709.
Change-Id: Idc1e4c76e39afb5a344d85f6b497930a488ce5cf
Reviewed-on: https://go-review.googlesource.com/80740
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
For "type T = U" we were accidentally emitting a #define for "U__size"
instead of "T__size".
Fixes#22877.
Change-Id: I5ed6757d697753ed6d944077c16150759f6e1285
Reviewed-on: https://go-review.googlesource.com/80759
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The signature of the mapassign_fast* routines need to distinguish
the pointerness of their key argument. If the affected routines
suspend part way through, the object pointed to by the key might
get garbage collected because the key is typed as a uint{32,64}.
This is not a problem for mapaccess or mapdelete because the key
in those situations do not live beyond the call involved. If the
object referenced by the key is garbage collected prematurely, the
code still works fine. Even if that object is subsequently reallocated,
it can't be written to the map in time to affect the lookup/delete.
Fixes#22781
Change-Id: I0bbbc5e9883d5ce702faf4e655348be1191ee439
Reviewed-on: https://go-review.googlesource.com/79018
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Martin Möhrmann <moehrmann@google.com>
CL 76551 modified inline_callers.go to build everything, including the
runtime, with -l=4. While that works in most places (and ideally
should work everywhere), it blows out the nosplit stack on
solaris/amd64.
Fix this by only building the test itself with -l=4.
This undoes some of the changes to this test from CL 73212, which
originally changed the go tool to rebuild all packages with the given
flags. This change modified the expected output of this test, so now
that we can go back to building only the test itself with inlining, we
revert these changes to the expected output. (That CL also changed
log.Fatalf to log.Printf, but didn't add "\n" to the end of the lines,
so this CL fixes that, too.)
Fixes#22797.
Change-Id: I6a91963a59ebe98edbe0921d8717af6b2c2191b0
Reviewed-on: https://go-review.googlesource.com/79197
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Improve the error message for wrong
case-field names in composite literals,
by mentioning the correct field name.
Given the program:
package main
type it struct {
ID string
}
func main() {
i1 := &it{id: "Bar"}
}
just like we do for usage of fields, we now
report wrongly cased fields as hints to give:
ts.go:8:14: unknown field 'id' in struct literal of type it (but does have ID)
instead of before:
ts.go:8:14: unknown field 'id' in struct literal of type it
Fixes#22794
Change-Id: I18cd70e75817025cb1df083503cae306e8d659fd
Reviewed-on: https://go-review.googlesource.com/78545
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This test fails on 1.9.2, but is ok on tip.
CL 77331 has both the 1.9.2 fix and this test, and is on the 1.9 release branch.
This CL is just the test, and is on HEAD. The buggy code doesn't exist on tip.
Update #22683
Change-Id: I04a24bd6c2d3068e18ca81da3347e2c1366f4447
Reviewed-on: https://go-review.googlesource.com/77332
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Also, with this change, error locations don't print absolute positions
in [] brackets following positions relative to line directives. To get
the absolute positions as well, specify the -L flag.
Fixes#22660.
Change-Id: I9ecfa254f053defba9c802222874155fa12fee2c
Reviewed-on: https://go-review.googlesource.com/77090
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
It has always been problematic that there was no way to specify
tool flags that applied only to the build of certain packages;
it was only to specify flags for all packages being built.
The usual workaround was to install all dependencies of something,
then build just that one thing with different flags. Since the
dependencies appeared to be up-to-date, they were not rebuilt
with the different flags. The new content-based staleness
(up-to-date) checks see through this trick, because they detect
changes in flags. This forces us to address the underlying problem
of providing a way to specify per-package flags.
The solution is to allow -gcflags=pattern=flags, which means
that flags apply to packages matching pattern, in addition to the
usual -gcflags=flags, which is now redefined to apply only to
the packages named on the command line.
See #22527 for discussion and rationale.
Fixes#22527.
Change-Id: I6716bed69edc324767f707b5bbf3aaa90e8e7302
Reviewed-on: https://go-review.googlesource.com/76551
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Plain blocks that contain only uninteresting instructions
(that do not have reliable Pos information themselves)
need to have their Pos left unset so that they can
inherit it from their successors. The "uninteresting"
test was not properly applied and not properly defined.
OpFwdRef does not appear in the ssa.html debugging output,
but at the time of the test these instructions did appear,
and it needs to be part of the test.
Fixes#22365.
Change-Id: I99e5b271acd8f6bcfe0f72395f905c7744ea9a02
Reviewed-on: https://go-review.googlesource.com/74252
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
They could get picked up by reflect code, yielding the wrong type.
Fixes#22605
Change-Id: Ie11fb361ca7f3255e662037b3407565c8f0a2c4c
Reviewed-on: https://go-review.googlesource.com/76315
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Be more pessimistic when parsing if/switch/for headers for better error
messages when things go wrong.
Fixes#22581.
Change-Id: Ibb99925291ff53f35021bc0a59a4c9a7f695a194
Reviewed-on: https://go-review.googlesource.com/76290
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Updates #21317
@mdempsky fixed issue #21317 with CL 66810,
so lock a test in to ensure we don't regress.
The test is manual for now before test/run.go
has support for matching column numbers so do
it old school and match expected output after
an exec.
Change-Id: I6c2a66ddf04248f79d17ed7033a3280d50e41562
Reviewed-on: https://go-review.googlesource.com/76150
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, assigning a []T where T is a go:notinheap type generates an
unnecessary write barrier for storing the slice pointer.
This fixes this by teaching HasHeapPointer that this type does not
have a heap pointer, and tweaking the lowering of slice assignments so
the pointer store retains the correct type rather than simply lowering
it to a *uint8 store.
Change-Id: I8bf7c66e64a7fefdd14f2bd0de8a5a3596340bab
Reviewed-on: https://go-review.googlesource.com/76027
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Updates #22389
@mdempsky's CL 70850 fixed the unnecessary
compile stack trace printing during ICE diagnostics.
This CL adds a test to lock in this behavior.
Change-Id: I9ce49923c80b78cb8c0bb5dc4af3c860a43d63ba
Reviewed-on: https://go-review.googlesource.com/74630
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
CL 65071 enabled inlining for local closures with no captures.
To determine safety of inlining a call sites, we check whether the
variable holding the closure has any assignments after its original
definition.
Unfortunately, that check did not catch OAS2MAPR and OAS2DOTTYPE,
leading to incorrect inlining when a variable holding a closure was
subsequently reassigned through a type conversion or a 2-valued map
access.
There was another more subtle issue wherein reassignment check would
always return a false positive for closure calls inside other
closures. This was caused by the Name.Curfn field of local variables
pointing to the OCLOSURE node instead of the corresponding ODCLFUNC,
which resulted in reassigned walking an empty Nbody and thus never
seeing any reassignments.
This CL fixes these oversights and adds many more tests for closure
inlining which ensure not only that inlining triggers but also the
correctness of the resulting code.
Updates #15561
Change-Id: I74bdae849c4ecfa328546d6d62b512e8d54d04ce
Reviewed-on: https://go-review.googlesource.com/75770
Reviewed-by: Hugues Bruant <hugues.bruant@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Instead of trying to validate map key types eagerly in some
cases, delay their validation to the end of type-checking,
when we all type information is present.
Passes go build -toolexec 'toolstash -cmp' -a std .
Fixes#21273.
Fixes#21657.
Change-Id: I532369dc91c6adca1502d6aa456bb06b57e6c7ff
Reviewed-on: https://go-review.googlesource.com/75310
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Handle make(map[any]any) and make(map[any]any, hint) where
hint <= BUCKETSIZE special to allow for faster map initialization
and to improve binary size by using runtime calls with fewer arguments.
Given hint is smaller or equal to BUCKETSIZE in which case
overLoadFactor(hint, 0) is false and no buckets would be allocated by makemap:
* If hmap needs to be allocated on the stack then only hmap's hash0
field needs to be initialized and no call to makemap is needed.
* If hmap needs to be allocated on the heap then a new special
makehmap function will allocate hmap and intialize hmap's
hash0 field.
Reduces size of the godoc by ~36kb.
AMD64
name old time/op new time/op delta
NewEmptyMap 16.6ns ± 2% 5.5ns ± 2% -66.72% (p=0.000 n=10+10)
NewSmallMap 64.8ns ± 1% 56.5ns ± 1% -12.75% (p=0.000 n=9+10)
Updates #6853
Change-Id: I624e90da6775afaa061178e95db8aca674f44e9b
Reviewed-on: https://go-review.googlesource.com/61190
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The test was skipped because it did not work on AMD64 with
frame pointer enabled, and accidentally skipped on other
architectures. Now frame pointer is the default on AMD64.
Update the test to work with frame pointer. Now the test
is skipped only when frame pointer is NOT enabled on AMD64.
Fixes#18317.
Change-Id: I724cb6874e562f16e67ce5f389a1d032a2003115
Reviewed-on: https://go-review.googlesource.com/68610
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This cuts 6 seconds off all.bash with the new go command.
Not a ton, but also an easy 6 seconds to grab.
The -tags=use_go_run in the misc/cgo tests is just some
go command flag that will make run.go use go run,
but without making everything look stale.
(Those tests have relative imports,
so go tool compile+link is not enough.)
Change-Id: I43bf4bb661d3adde2b2d4aad5e8f64b97bc69ba9
Reviewed-on: https://go-review.googlesource.com/73994
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL changes the go command to base all its rebuilding decisions
on the content of the files being processed and not their file system
modification times. It also eliminates the special handling of release
toolchains, which were previously considered always up-to-date
because modification time order could not be trusted when unpacking
a pre-built release.
The go command previously tracked "build IDs" as a backup to
modification times, to catch changes not reflected in modification times.
For example, if you remove one .go file in a package with multiple .go
files, there is no modification time remaining in the system that indicates
that the installed package is out of date. The old build ID was the hash
of a list of file names and a few other factors, expected to change if
those factors changed.
This CL moves to using this kind of build ID as the only way to
detect staleness, making sure that the build ID hash includes all
possible factors that need to influence the rebuild decision.
One such factor is the compiler flags. As of this CL, if you run
go build -gcflags -N cmd/gofmt
you will get a gofmt where every package is built with -N,
regardless of what may or may not be installed already.
Another such factor is the linker flags. As of this CL, if you run
go install myprog
go install -ldflags=-s myprog
the second go install will now correctly build a new myprog with
the updated linker flags. (Previously the installed myprog appeared
up-to-date, because the ldflags were not included in the build ID.)
Because we have more precise information we can also validate whether
the target of a "go test -c" operation is already the right binary and
therefore can avoid a rebuild.
This CL sets us up for having a more general build artifact cache,
maybe even a step toward not having a pkg directory with .a files,
but this CL does not take that step. For now the result of go install
is the same as it ever was; we just do a better job of what needs to
be installed.
This CL does slow down builds a small amount by reading all the
dependent source files in full. (The go command already read the
beginning of every dependent source file to discover build tags
and imports.) On my MacBook Pro, before this CL all.bash takes
3m58s, while after this CL and a few optimizations stacked above it
all.bash takes 4m28s. Given that CL 73850 cut 1m43s off the all.bash
time earlier today, we can afford adding 30s back for now.
More optimizations are planned that should make the go command
more efficient than it was even before this CL.
Fixes#15799.
Fixes#18369.
Fixes#19340.
Fixes#21477.
Change-Id: I10d7ca0e31ca3f58aabb9b1f11e2e3d9d18f0bc9
Reviewed-on: https://go-review.googlesource.com/73212
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
If the go install doesn't use the same flags as the main build
it can overwrite the installed standard library, leading to
flakiness and slow future tests.
Force uses of 'go install' etc to propagate $GO_GCFLAGS
or disable them entirely, to avoid problems.
As I understand it, the main place this happens is the ssacheck builder.
If there are other uses that need to run some of the now-disabled
tests we can reenable fixed tests in followup CLs.
Change-Id: Ib860a253539f402f8a96a3c00ec34f0bbf137c9a
Reviewed-on: https://go-review.googlesource.com/74470
Reviewed-by: David Crawshaw <crawshaw@golang.org>
The test for #18902 reads the assembly stream to be sure
that the line number does not change too often (this is an
indication that debugging the code will be unpleasant and
that the compiler is probably getting line numbers "wrong").
It checks that it is getting "enough" input, but the
compiler has gotten enough better since the test was written
that it now fails for lack of enough input. The old
threshould was 200 instructions, the new one is 150 (the
minimum observed input is on arm64 with 184 instructions).
Fixes#22494.
Change-Id: Ibba7e9ff4ab6a7be369e5dd5859d150b7db94653
Reviewed-on: https://go-review.googlesource.com/74357
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
KeepAlive needs to introduce a use of the spill of the
value it is keeping alive. Without that, we don't guarantee
that the spill dominates the KeepAlive.
This bug was probably introduced with the code to move spills
down to the dominator of the restores, instead of always spilling
just after the value itself (CL 34822).
Fixes#22458.
Change-Id: I94955a21960448ffdacc4df775fe1213967b1d4c
Reviewed-on: https://go-review.googlesource.com/74210
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
Currently copy and append for types containing only scalars and
notinheap pointers still get compiled to have write barriers, even
though those write barriers are unnecessary. Fix these to use
HasHeapPointer instead of just Haspointer so that they elide write
barriers when possible.
This fixes the unnecessary write barrier in runtime.recordspan when it
grows the h.allspans slice. This is important because recordspan gets
called (*very* indirectly) from (*gcWork).tryGet, which is
go:nowritebarrierrec. Unfortunately, the compiler's analysis has no
hope of seeing this because it goes through the indirect call
fixalloc.first, but I saw it happen.
Change-Id: Ieba3abc555a45f573705eab780debcfe5c4f5dd1
Reviewed-on: https://go-review.googlesource.com/73413
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Currently (*Type).HasHeapPointer only ignores pointers go:notinheap
types if the type itself is a pointer to a go:notinheap type. However,
if it's some other type that contains pointers where all of those
pointers are go:notinheap, it will conservatively return true. As a
result, we'll use write barriers where they aren't needed, for example
calling typedmemmove instead of just memmove on structs that contain
only go:notinheap pointers.
Fix this by making HasHeapPointer walk the whole type looking for
pointers that aren't marked go:notinheap.
Change-Id: Ib8c6abf6f7a20f34969d1d402c5498e0b990be59
Reviewed-on: https://go-review.googlesource.com/73412
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The current go:nowritebarrierrec checker has two problems that limit
its coverage:
1. It doesn't understand that systemstack calls its argument, which
means there are several cases where we fail to detect prohibited write
barriers.
2. It only observes calls in the AST, so calls constructed during
lowering by SSA aren't followed.
This CL completely rewrites this checker to address these issues.
The current checker runs entirely after walk and uses visitBottomUp,
which introduces several problems for checking across systemstack.
First, visitBottomUp itself doesn't understand systemstack calls, so
the callee may be ordered after the caller, causing the checker to
fail to propagate constraints. Second, many systemstack calls are
passed a closure, which is quite difficult to resolve back to the
function definition after transformclosure and walk have run. Third,
visitBottomUp works exclusively on the AST, so it can't observe calls
created by SSA.
To address these problems, this commit splits the check into two
phases and rewrites it to use a call graph generated during SSA
lowering. The first phase runs before transformclosure/walk and simply
records systemstack arguments when they're easy to get. Then, it
modifies genssa to record static call edges at the point where we're
lowering to Progs (which is the latest point at which position
information is conveniently available). Finally, the second phase runs
after all functions have been lowered and uses a direct BFS walk of
the call graph (combining systemstack calls with static calls) to find
prohibited write barriers and construct nice error messages.
Fixes#22384.
For #22460.
Change-Id: I39668f7f2366ab3c1ab1a71eaf25484d25349540
Reviewed-on: https://go-review.googlesource.com/72773
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
...because that's an illegal addressing mode.
I double-checked handling of this code, and 387 is the only
place where this check is missing.
Fixes#22429
Change-Id: I2284fe729ea86251c6af2f04076ddf7a5e66367c
Reviewed-on: https://go-review.googlesource.com/73551
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
If n.Type==nil after typechecking, then we should have already
reported a more useful error somewhere else. Just return 0 in
evalunsafe without trying to do anything else that's likely to cause
problems.
Also, further split out issue7525.go into more test files, because
cmd/compile reports at most one typechecking loop per compilation
unit.
Fixes#22351.
Change-Id: I3ebf505f72c48fcbfef5ec915606224406026597
Reviewed-on: https://go-review.googlesource.com/72251
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Robert Griesemer <gri@golang.org>
Fine-tune skipping of tokens after missing closing parentheses in lists.
Fixes#22164.
Change-Id: I575d86e21048cd40340a2c08399e8b0deec337cf
Reviewed-on: https://go-review.googlesource.com/71250
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Follow CL 41477 and add two more line position tests for yyerror calls
in the typechecker which are currently not tested.
Update #19683
Change-Id: Iacd865195a3bfba87d8c22655382af267aba47a9
Reviewed-on: https://go-review.googlesource.com/70251
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Previously, we were treating cross-package function calls as free for
inlining budgeting.
In theory, we should be able to recompute InlCost from the
exported/reimported function bodies. However, that process mutates the
structure of the Node AST enough that it doesn't preserve InlCost. To
avoid unexpected issues, just record and restore InlCost in the export
data.
Fixes#19261.
Change-Id: Iac2bc0d32d4f948b64524aca657051f9fc96d92d
Reviewed-on: https://go-review.googlesource.com/70151
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Calls to a closure held in a local, non-escaping,
variable can be inlined, provided the closure body
can be inlined and the variable is never written to.
The current implementation has the following limitations:
- closures with captured variables are not inlined because
doing so naively triggers invariant violation in the SSA
phase
- re-assignment check is currently approximated by checking
the Addrtaken property of the variable which should be safe
but may miss optimization opportunities if the address is
not used for a write before the invocation
Updates #15561
Change-Id: I508cad5d28f027bd7e933b1f793c14dcfef8b5a1
Reviewed-on: https://go-review.googlesource.com/65071
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hugues Bruant <hugues.bruant@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
It should be skipped on 32-bit architectures.
Change-Id: If7a64b9e90e47c3e8734dd62729bfd2944ae926c
Reviewed-on: https://go-review.googlesource.com/70071
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
If the stack frame is too large, abort immediately.
We used to generate code first, then abort.
In issue 22200, generating code raised a panic
so we got an ICE instead of an error message.
Change the max frame size to 1GB (from 2GB).
Stack frames between 1.1GB and 2GB didn't used to work anyway,
the pcln table generation would have failed and generated an ICE.
Fixes#22200
Change-Id: I1d918ab27ba6ebf5c87ec65d1bccf973f8c8541e
Reviewed-on: https://go-review.googlesource.com/69810
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This re-enables functionality that inadvertently was disabled in the
(long) past.
Also, don't perform branch checks if we had errors in a function
to avoid spurious errors or (worst-case) crashes.
Slightly modified test/fixedbugs/issue14006.go to make sure the
test still reports invalid label errors (the surrounding function
must be syntactically correct).
Change-Id: Id5642930877d7cf3400649094ec75c753b5084b7
Reviewed-on: https://go-review.googlesource.com/69770
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We've supported inlining methods called as functions for a while now.
Change-Id: I53fba426e45f91d65a38f00456c2ae1527372b50
Reviewed-on: https://go-review.googlesource.com/69530
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Keep left-to-right order when referring to the number of
variables and values involved.
Fixes#22159.
Change-Id: Iccca12d3222f9d5e049939a9ccec07513c393faa
Reviewed-on: https://go-review.googlesource.com/68690
Reviewed-by: Russ Cox <rsc@golang.org>
C_PPAUTO was matching offsets that is a multiple 8. But this
condition is dropped in CL 55610, causing unaligned offset
between 256 and 504 mistakenly matched to some classes, e.g.
C_UAUTO8K. This CL restores this condition, also fixes an
error that C_PPAUTO shouldn't match C_PSAUTO, because the
latter is not guaranteed to be multiple of 8. C_PPAUTO_8 is
unnecessary, removed.
Fixes#21992.
Change-Id: I75d5a0e5f5dc3dae335721fbec1bbcd4a3b862f2
Reviewed-on: https://go-review.googlesource.com/65730
Reviewed-by: David Chase <drchase@google.com>
Historically, gc optimistically parsed the left-hand side of
assignments as expressions. Later, if it discovered a ":=" assignment,
it rewrote the parsed expressions as declarations.
This failed in the presence of dot imports though, because we lost
information about whether an imported object was named via a bare
identifier "Foo" or a normal qualified "pkg.Foo".
This CL fixes the issue by specially noding the left-hand side of ":="
assignments.
Fixes#22076.
Change-Id: I18190ecdb863112e7d009e1687e6112eec559921
Reviewed-on: https://go-review.googlesource.com/66810
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Use entire inlining call stack to decide whether two panic calls
can be merged. We used to merge panic calls when only the leaf
line numbers matched, but that leads to places higher up the call
stack being merged incorrectly.
Fixes#22083
Change-Id: Ia41400a80de4b6ecf3e5089abce0c42b65e9b38a
Reviewed-on: https://go-review.googlesource.com/67632
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Very similar fix to the one made in golang.org/cl/65655. This time it's
for switches on interface values, as we look for duplicates in a
different manner to keep types in mind.
As before, add a small regression test.
Updates #22001.
Fixes#22063.
Change-Id: I9a55d08999aeca262ad276b4649b51848a627b02
Reviewed-on: https://go-review.googlesource.com/66450
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
If we have
y = <int16> (MOVBQSX x)
z = <int32> (MOVWQSX y)
We used to use this rewrite rule:
(MOVWQSX x:(MOVBQSX _)) -> x
But that resulted in replacing z with a value whose type
is only int16. Then if z is spilled and restored, it gets
zero extended instead of sign extended.
Instead use the rule
(MOVWQSX (MOVBQSX x)) -> (MOVBQSX x)
The result is has the correct type, so it can be spilled
and restored correctly. It might mean that a few more extension
ops might not be eliminated, but that's the price for correctness.
Fixes#21963
Change-Id: I6ec82c3d2dbe43cc1fee6fb2bd6b3a72fca3af00
Reviewed-on: https://go-review.googlesource.com/65290
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is a regression introduced by myself in golang.org/cl/41852,
confirmed by the program that reproduces the crash that can be seen in
the added test.
Fixes#21988.
Change-Id: I18d5b2b3de63ced84db705b18490b00b16b59e02
Reviewed-on: https://go-review.googlesource.com/65655
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The compiler generates wrapper methods to forward interface method
calls (which are always pointer-based) to value methods. These
wrappers appear in the call stack even though they are an
implementation detail. This leaves ugly "<autogenerated>" functions in
stack traces and can throw off skip counts for stack traces.
Fix this by considering these runtime frames in printed stack traces
so they will only be printed if runtime frames are being printed, and
by eliding them from the call stack expansion used by CallersFrames
and Caller.
This removes the test for issue 4388 since that was checking that
"<autogenerated>" appeared in the stack trace instead of something
even weirder. We replace it with various runtime package tests.
Fixes#16723.
Change-Id: Ice3f118c66f254bb71478a664d62ab3fc7125819
Reviewed-on: https://go-review.googlesource.com/45412
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The existing logic tried to advance the offset for each variable's
width, but then tried to undo this logic with the array and struct
handling code. It can all be much simpler by only worrying about
computing offsets within the array and struct code.
While here, include a short-circuit for zero-width arrays to fix a
pedantic compiler failure case.
Passes toolstash-check.
Fixes#20739.
Change-Id: I98af9bb512a33e3efe82b8bf1803199edb480640
Reviewed-on: https://go-review.googlesource.com/64471
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Previously, after inlining a call, we made a second pass to rewrite
the AST's position information to record the inlined stack frame. The
call arguments were part of this AST, but it would be incorrect to
rewrite them too, so extra effort was made to temporarily remove them
while the position rewriting was done.
However, this extra logic was only done for regular arguments: it was
not done for receiver arguments. Consequently if m was inlined in
"f().m(g(), h())", g and h would have correct call frames, but f would
appear to be called by m.
The fix taken by this CL is to merge setpos into inlsubst and only
rewrite position information for nodes that were actually copied from
the original function AST body. As a side benefit, this eliminates an
extra AST pass and some AST walking code.
Fixes#21879.
Change-Id: I22b25c208313fc25c358d3a2eebfc9b012400084
Reviewed-on: https://go-review.googlesource.com/64470
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Previously, we used OXFALL vs OFALL to distinguish fallthrough
statements that had been validated. Because in the Node AST we flatten
statement blocks, OXCASE and OXFALL needed to keep track of their
block scopes for this purpose.
Now that we have an AST that keeps these separate, we can just perform
the validation earlier.
Passes toolstash-check.
Fixes#14540.
Change-Id: I8421eaba16c2b3b72c9c5483b5cf20b14261385e
Reviewed-on: https://go-review.googlesource.com/61130
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
By setting both a valid size and alignment for broken recursive types,
we can appease some more safety checks and prevent compiler crashes.
Fixes#21882.
Change-Id: Ibaa137d8aa2c2a9d521462f144d7016c4abfd6e7
Reviewed-on: https://go-review.googlesource.com/64430
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Refactor walkrange to treat "for _ = range a" as "for range a".
This avoids generating some later discarded nodes in the compiler.
Passes toolstash -cmp.
Change-Id: Ifb2e1ca3b8519cbb67e8ad5aad514af9d18f1ec4
Reviewed-on: https://go-review.googlesource.com/61017
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Currently, we handle "x op= y" by rewriting as "x = x op y", while
ensuring that any calls or receive operations in 'x' are only
evaluated once. Notably, pointer indirection, indexing operations,
etc. are left alone as it's typically safe to re-evaluate those.
However, those operations were interleaved with evaluating 'y', which
could include function calls that might cause re-evaluation to yield
different memory addresses.
As a fix, simply ensure that we order side-effecting operations in 'y'
before either evaluation of 'x'.
Fixes#21687.
Change-Id: Ib14e77760fda9c828e394e8e362dc9e5319a84b2
Reviewed-on: https://go-review.googlesource.com/60091
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Do the similar thing to CL 55143 to reduce IMUL.
Change-Id: I1bd38f618058e3cd74fac181f003610ea13f2294
Reviewed-on: https://go-review.googlesource.com/56252
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The assembler barfs on large offsets. Make sure that all the
instructions that need to have their offsets in an int32
1) check on any rule that computes offsets for such instructions
2) change their aux fields so the check builder checks it.
The assembler also silently misassembled offsets between 1<<31
and 1<<32. Add a check in the assembler to barf on those as well.
Fixes#21655
Change-Id: Iebf24bf10f9f37b3ea819ceb7d588251c0f46d7d
Reviewed-on: https://go-review.googlesource.com/59630
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
For code like the following (where x escapes):
x := []int{1}
We're currently generating a nil check. The line above is really 3 operations:
t := new([1]int)
t[0] = 1
x := t[:]
We remove the nil check for t[0] = 1, but not for t[:].
Our current nil check removal rule is too strict about the possible
memory arguments of the nil check. Unlike zeroing or storing to the
result of runtime.newobject, the nilness of runtime.newobject is
always false, even after other stores have happened in the meantime.
Change-Id: I95fad4e3a59c27effdb37c43ea215e18f30b1e5f
Reviewed-on: https://go-review.googlesource.com/58711
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This is a crude compiler pass to eliminate stores to auto variables
that are only ever written to.
Eliminates an unnecessary store to x from the following code:
func f() int {
var x := 1
return *(&x)
}
Fixes#19765.
Change-Id: If2c63a8ae67b8c590b6e0cc98a9610939a3eeffa
Reviewed-on: https://go-review.googlesource.com/38746
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Where possible generate calls to runtime makemap with int hint argument
during compile time instead of makemap with int64 hint argument.
This eliminates converting the hint argument for calls to makemap with
int64 hint argument for platforms where int64 values do not fit into
an argument of type int.
A similar optimization for makeslice was introduced in CL
golang.org/cl/27851.
386:
name old time/op new time/op delta
NewEmptyMap 53.5ns ± 5% 41.9ns ± 5% -21.56% (p=0.000 n=10+10)
NewSmallMap 182ns ± 1% 165ns ± 1% -8.92% (p=0.000 n=10+10)
Change-Id: Ibd2b4c57b36f171b173bf7a0602b3a59771e6e44
Reviewed-on: https://go-review.googlesource.com/55142
Reviewed-by: Keith Randall <khr@golang.org>
If an error was already printed during LHS conversion step, we don't reprint
the "cannot convert" error.
In particular, this prevents `_ = int("1")` (and all similar casts) from
resulting in multiple identical error messages being printed.
Fixes#20812.
Change-Id: If6e52c59eab438599d641ecf6f110ebafca740a9
Reviewed-on: https://go-review.googlesource.com/46912
Reviewed-by: Robert Griesemer <gri@golang.org>
There are a few cases where this can be useful. Apart from the obvious
(and silly)
100*n + 200*n
where we generate one IMUL instead of two, consider:
15*n + 31*n
Currently, the compiler strength-reduces both imuls, generating:
0x0000 00000 MOVQ "".n+8(SP), AX
0x0005 00005 MOVQ AX, CX
0x0008 00008 SHLQ $4, AX
0x000c 00012 SUBQ CX, AX
0x000f 00015 MOVQ CX, DX
0x0012 00018 SHLQ $5, CX
0x0016 00022 SUBQ DX, CX
0x0019 00025 ADDQ CX, AX
0x001c 00028 MOVQ AX, "".~r1+16(SP)
0x0021 00033 RET
But combining the imuls is both faster and shorter:
0x0000 00000 MOVQ "".n+8(SP), AX
0x0005 00005 IMULQ $46, AX
0x0009 00009 MOVQ AX, "".~r1+16(SP)
0x000e 00014 RET
even without strength-reduction.
Moreover, consider:
5*n + 7*(n+1) + 11*(n+2)
We already have a rule that rewrites 7(n+1) into 7n+7, so the
generated code (without imuls merging) looks like this:
0x0000 00000 MOVQ "".n+8(SP), AX
0x0005 00005 LEAQ (AX)(AX*4), CX
0x0009 00009 MOVQ AX, DX
0x000c 00012 NEGQ AX
0x000f 00015 LEAQ (AX)(DX*8), AX
0x0013 00019 ADDQ CX, AX
0x0016 00022 LEAQ (DX)(CX*2), CX
0x001a 00026 LEAQ 29(AX)(CX*1), AX
0x001f 00031 MOVQ AX, "".~r1+16(SP)
But with imuls merging, the 5n, 7n and 11n factors get merged, and the
generated code looks like this:
0x0000 00000 MOVQ "".n+8(SP), AX
0x0005 00005 IMULQ $23, AX
0x0009 00009 ADDQ $29, AX
0x000d 00013 MOVQ AX, "".~r1+16(SP)
0x0012 00018 RET
Which is both faster and shorter; that's also the exact same code that
clang and the intel c compiler generate for the above expression.
Change-Id: Ib4d5503f05d2f2efe31a1be14e2fe6cac33730a9
Reviewed-on: https://go-review.googlesource.com/55143
Reviewed-by: Keith Randall <khr@golang.org>
The gofmt bug in question seems to be fixed (at least gofmt doesn't
complain), so reenable the commented-out ... test.
Change-Id: Icbfe0511160210557894ec8eb9b206aa6133d486
Reviewed-on: https://go-review.googlesource.com/55030
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
https://golang.org/cl/37508 added an escape analysis test for #12397 to
escape2.go but missed to add it to escape2n.go. The comment at the top
of the former states that the latter should contain all the same tests
and the tests only differ in using -N to compile. Conform to this by
adding the function issue12397 to escape2n.go as well.
Also fix a whitespace difference in escape2.go, so the two files match
exactly (except for the comment at the top).
Change-Id: I3a09cf95169bf2150a25d6b4ec9e147265d36760
Reviewed-on: https://go-review.googlesource.com/54610
Reviewed-by: Avelino <t@avelino.xxx>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
It is possible to have an unexported name with a nil package,
for an embedded field whose type is a pointer to an unexported type.
We must encode that fact in the type..namedata symbol name,
to avoid incorrectly merging an unexported name with an exported name.
Fixes#21120
Change-Id: I2e3879d77fa15c05ad92e0bf8e55f74082db5111
Reviewed-on: https://go-review.googlesource.com/50710
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Load/store-merging and move optimizations can result in unaligned
memory accesses. This is fine so long as the load/store instruction
used does not take a relative offset. In the SSA rules this means we
must not merge (MOVDaddr (SB)) ops into loads/stores unless we can
guarantee the alignment of the target.
Fixes#21048.
Change-Id: I70f13a62a148d5f0a56e704e8f76e36b4a4226d9
Reviewed-on: https://go-review.googlesource.com/49250
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Framepointer is the default now. Only print an X: list
if the settings are _not_ the default.
Before:
$ go tool compile -V
compile version devel +a5f30d9508 Sun Jul 16 14:43:48 2017 -0400 X:framepointer
$ go1.8 tool compile -V
compile version go1.8 X:framepointer
$
After:
$ go tool compile -V
compile version devel +a5f30d9508 Sun Jul 16 14:43:48 2017 -0400
$ go1.9 tool compile -V # imagined
compile version go1.9
$
Perpetuates #18317.
Change-Id: I981ba5c62be32e650a166fc9740703122595639b
Reviewed-on: https://go-review.googlesource.com/49252
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
On a slow or distracted machine, 0.1s is sometimes
not long enough for a non-blocking function call to complete.
This causes rare test flakes.
They can be easily reproduced by reducing the wait time to (say) 100ns.
For non-blocking functions, increase the window from 100ms to 10s.
Using different windows for block and non-blocking functions,
allows us to reduce the time for blocking functions.
The risk here is false negatives, but that risk is low;
this test is run repeatedly on many fast machines,
for which 10ms is ample time.
This reduces the time required to run the test by a factor of 10,
from ~1s to ~100ms.
Fixes#20299
Change-Id: Ice9a641a66c6c101d738a2ebe1bcb144ae3c9916
Reviewed-on: https://go-review.googlesource.com/47812
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If the LHS is unassignable, there's no point in trying to make sure
the RHS can be assigned to it or making sure they're realizable
types. This is consistent with go/types.
In particular, this prevents "1 = 2" from causing a panic when "1"
still ends up with the type "untyped int", which is not realizable.
Fixes#20813.
Change-Id: I4710bdaac2e375ef12ec29b888b8ac84fb640e56
Reviewed-on: https://go-review.googlesource.com/46835
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Fixes crash when printing a related error message later on.
Fixes#20789.
Change-Id: I6d2c35aafcaeda26a211fc6c8b7dfe4a095a3efe
Reviewed-on: https://go-review.googlesource.com/46713
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Loops of the form "for i,e := range" needed to have their
condition rotated to the "bottom" for the preemptible loops
GOEXPERIMENT, but this caused a performance regression
because it degraded bounds check removal. For now, make
the loop rotation/guarding conditional on the experiment.
Fixes#20711.
Updates #10958.
Change-Id: Icfba14cb3b13a910c349df8f84838cf4d9d20cf6
Reviewed-on: https://go-review.googlesource.com/46410
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Minimal reconstruction of reported failure case.
Manually verified that test fails with CL 45911 reverted.
Change-Id: Ia5d11500d91b46ba1eb5d841db3987edb9136c39
Reviewed-on: https://go-review.googlesource.com/45970
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Before CL 36170, we identified all function bodies that needed to be
exported before writing any export data.
With CL 36170, we started identifying additional functions while
exporting function bodies. As a consequence, we cannot use a
range-based for loop for iterating over function bodies anymore.
Fixes#18895.
Change-Id: I9cbefa8d311ca8c9898c8272b2ac365976b02396
Reviewed-on: https://go-review.googlesource.com/45817
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
These are used by DIV[U] and MOD[U] assembly instructions.
Add a test in the stdlib so we actually exercise linking
to these routines.
Update #19507
Change-Id: I0d8e19a53e3744abc0c661ea95486f94ec67585e
Reviewed-on: https://go-review.googlesource.com/45703
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The existing code used Type.String() to obtain the name of a type;
specifically type reflect.Method in this case. However, Type.String()
formatting is intended for error messages and uses the format
pkgpath.name instead of pkgname.name if a package (in this case
package reflect) is imported multiple times. As a result, the
reflect.Method type detection failed under peculiar circumstances
(see the included test case).
Thanks to https://github.com/ericlagergren for tracking down
an easy way to make the bug disappear (which in turn directly
led to the underlying cause).
Fixes#19028.
Change-Id: I1b9c5dfd183260a9be74969fe916a94146fc36da
Reviewed-on: https://go-review.googlesource.com/45777
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This results in names to unexported fields like
net.(*Dialer)."".deadline instead of net.(*Dialer).deadline.
Fixes#18419.
Change-Id: I0415c68b77cc16125c2401320f56308060ac3f25
Reviewed-on: https://go-review.googlesource.com/44070
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Arguments to inlined calls are hidden from setPos as follows:
args := as.Rlist
as.Rlist.Set(nil)
// setPos...
as.Rlist.Set(args.Slice())
Previously, this code had no effect since the value of as was
overwritten by the assignment in the retvars loop.
Fixes#19799.
Change-Id: Iaf97259f82fdba8b236136337cc42b2774c7fef5
Reviewed-on: https://go-review.googlesource.com/44351
Run-TryBot: David Lazar <lazard@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Apply the fix in CL 44355 to MIPS.
ARM64 has these rules but commented out for performance reason.
Fix the commented rules, in case they are enabled in the future.
Enhance the test so it triggers the failure on ARM and MIPS without
the fix.
Updates #20530.
Change-Id: I82d77448e3939a545fe519d0a29a164f8fa5417c
Reviewed-on: https://go-review.googlesource.com/44430
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Replacing byteload-of-bytestore-of-x with x is incorrect
when x contains a larger-than-byte value (and so on for
16 and 32-bit load/store pairs). Replace "x" with the
appropriate zero/sign extension of x, which if unnecessary
will be repaired by other rules.
Made logic for arm match x86 and amd64; yields minor extra
optimization, plus I am (much) more confident it's correct,
despite inability to reproduce bug on arm.
Ppc64 lacks this optimization, hence lacks this problem.
See related https://golang.org/cl/37154/Fixes#20530.
Change-Id: I6af9cac2ad43bee99cafdcb04725ce7e55a43323
Reviewed-on: https://go-review.googlesource.com/44355
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Instead of just printing the value, print the original node to make the
error more human-friendly. Also print the value if its string form is
different than the original node, to make sure it's obvious what value
was duplicated.
This means that "case '@', '@':", which used to print:
duplicate case 64 in switch
Will now print:
duplicate case '@' (value 64) in switch
Factor this logic out into its own function to reuse it in range cases
and any other place where we might want to print a node and its value in
the future.
Also needed to split the errorcheck files because expression switch case
duplicates are now detected earlier, so they stop the compiler before it
gets to generating the AST and detecting the type switch case
duplicates.
Fixes#20112.
Change-Id: I9009b50dec0d0e705e5de9c9ccb08f1dce8a5a99
Reviewed-on: https://go-review.googlesource.com/41852
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
These are functional tests, so it is safe to gofmt them.
Change-Id: I3067279c1d49809ac6a62054448ab8a6c3de9bda
Reviewed-on: https://go-review.googlesource.com/43623
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Cannot reproduce original problem. Compiler internals
have changed enough such that this appears to work now.
Restore original test (exported interfaces), but also
keep version of the test using non-exported interfaces.
Fixes#15596.
Change-Id: Idb32da80239963242bd5d1609343c80f19773b0c
Reviewed-on: https://go-review.googlesource.com/43622
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
When compiling concurrently, we walk all functions before compiling
any of them. Walking functions can cause variables to switch from
being non-addrtaken to addrtaken, e.g. to prepare for a runtime call.
Typechecking propagates addrtaken-ness of closure variables to
their outer variables, so that capturevars can decide whether to
pass the variable's value or a pointer to it.
When all functions are compiled immediately, as long as the containing
function is compiled prior to the closure, this propagation has no effect.
When compilation is deferred, though, in rare cases, this results in
a change in the addrtaken-ness of a variable in the outer function,
which in turn changes the compiler's output.
(This is rare because in a great many cases, a temporary has been
introduced, insulating the outer variable from modification.)
But concurrent compilation must generate identical results.
To fix this, track whether capturevars has run.
If it has, there is no need to update outer variables
when closure variables change.
Capturevars always runs before any functions are walked or compiled.
The remainder of the changes in this CL are to support the test.
In particular, -d=compilelater forces the compiler to walk all
functions before compiling any of them, despite being non-concurrent.
This is useful because -live is fundamentally incompatible with
concurrent compilation, but we want -c=1 to have no behavior changes.
Fixes#20250
Change-Id: I89bcb54268a41e8588af1ac8cc37fbef856a90c2
Reviewed-on: https://go-review.googlesource.com/42853
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Tuple ops are weird. They are essentially a pair of ops,
one which consumes a mem and one which generates a mem (the Select1).
The schedule pass didn't handle these quite right.
Fix the scheduler to include both parts of the paired op in
the store chain. That makes sure that loads are correctly ordered
with respect to the first of the pair.
Add a check for the ssacheck builder, that there is only one
live store at a time. I thought we already had such a check, but
apparently not...
Fixes#20335
Change-Id: I59eb3446a329100af38d22820b1ca2190ca46a78
Reviewed-on: https://go-review.googlesource.com/43294
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The writebarrier test has to change.
Now that T23 composite literals are passed to the backend,
they get SSA'd, so writes to their fields are treated separately,
so the relevant part of the first write to t23 is now a dead store.
Preserve the intent of the test by splitting it up into two functions.
Reduces code size a bit:
name old object-bytes new object-bytes delta
Template 386k ± 0% 386k ± 0% ~ (all equal)
Unicode 202k ± 0% 202k ± 0% ~ (all equal)
GoTypes 1.16M ± 0% 1.16M ± 0% ~ (all equal)
Compiler 3.92M ± 0% 3.91M ± 0% -0.19% (p=0.008 n=5+5)
SSA 7.91M ± 0% 7.91M ± 0% ~ (all equal)
Flate 228k ± 0% 228k ± 0% -0.05% (p=0.008 n=5+5)
GoParser 283k ± 0% 283k ± 0% ~ (all equal)
Reflect 952k ± 0% 952k ± 0% -0.06% (p=0.008 n=5+5)
Tar 188k ± 0% 188k ± 0% -0.09% (p=0.008 n=5+5)
XML 406k ± 0% 406k ± 0% -0.02% (p=0.008 n=5+5)
[Geo mean] 649k 648k -0.04%
Fixes#18872
Change-Id: Ifeed0f71f13849732999aa731cc2bf40c0f0e32a
Reviewed-on: https://go-review.googlesource.com/43154
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reuse block head or preceding instruction's line number for
register allocator's spill, fill, copy, rematerialization
instructionsl; and also for phi, and for no-src-pos
instructions. Assembler creates same line number tables
for copy-predecessor-line and for no-src-pos,
but copy-predecessor produces better-looking assembly
language output with -S and with GOSSAFUNC, and does not
require changes to tests of existing assembly language.
Split "copyInto" into two cases, one for register allocation,
one for otherwise. This caused the test score line change
count to increase by one, which may reflect legitimately
useful information preserved. Without any special treatment
for copyInto, the change count increases by 21 more, from
51 to 72 (i.e., quite a lot).
There is a test; using two naive "scores" for line number
churn, the old numbering is 2x or 4x worse.
Fixes#18902.
Change-Id: I0a0a69659d30ee4e5d10116a0dd2b8c5df8457b1
Reviewed-on: https://go-review.googlesource.com/36207
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
If there were more unused imports than
the maximum default number of errors to report,
the set of reported imports was non-deterministic.
Fix by accumulating and sorting them prior to output.
Fixes#20298
Change-Id: Ib3d5a15fd7dc40009523fcdc1b93ddc62a1b05f2
Reviewed-on: https://go-review.googlesource.com/42954
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
If we've already complained about a type T,
don't complain again about further expressions
involving it.
Fixes#20245 and hopefully all of its ilk.
Change-Id: Ic0abe8235d52e8a7ac40e3615aea8f3a54fd7cec
Reviewed-on: https://go-review.googlesource.com/42690
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Compile:
package p
var f = func(...A)
Before this CL:
x.go:3:13: type %!v(PANIC=runtime error: invalid memory address or nil pointer dereference) is not an expression
x.go:3:17: undefined: A
After this CL:
x.go:3:13: type func(...<T>) is not an expression
x.go:3:17: undefined: A
Found with go-fuzz.
Fixes#20233
Change-Id: Ibb232b3954c4091071440eba48b44c4022a8083f
Reviewed-on: https://go-review.googlesource.com/42610
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Because the hint parameter is supposed to be treated
purely as a hint, if it doesn't meet the requirements
we disregard it and continue as if there was no hint
at all.
Fixes#19926
Change-Id: I86e7f99472fad6b99ba4e2fd33e4a9e55d55115e
Reviewed-on: https://go-review.googlesource.com/40854
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Without this, T can sneak through to the backend
with its width unknown.
Fixes#20174
Change-Id: I9b21e0e2641f75e360cc5e45dcb4eefe8255b675
Reviewed-on: https://go-review.googlesource.com/42175
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Updates #18089.
Test for that issue; it was inadvertently fixed
by CL 34988. Ensure that we don't regress on the fix.
Change-Id: Icb85fc20dbb0a47f028f088281319b552b16759d
Reviewed-on: https://go-review.googlesource.com/42173
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The code in #20162 contains an embedded interface.
It didn't get dowidth'd by the frontend,
and during DWARF generation, ngotype asked
for a string description of it,
which triggered a request for the number of fields
in the interface, which triggered a dowidth,
which is disallowed in the backend.
The other changes in this CL are to support the test.
Fixes#20162
Change-Id: I4d0be5bd949c361d4cdc89a8ed28b10977e40cf9
Reviewed-on: https://go-review.googlesource.com/42131
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
dowidth is fundamentally unsafe to call from the back end;
it will cause data races.
Replace all calls to dowidth in the backend with
assertions that the width has been calculated.
Then fix all the cases in which that was not so,
including the cases from #20145.
Fixes#20145.
Change-Id: Idba3d19d75638851a30ec2ebcdb703c19da3e92b
Reviewed-on: https://go-review.googlesource.com/41970
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
When a constant doesn't fit in a single instruction, use two
paired instructions instead of the constant pool. For example
ADD $0xaa00bb, R0, R1
Used to rewrite to:
MOV ?(IP), R11
ADD R11, R0, R1
Instead, do:
ADD $0xaa0000, R0, R1
ADD $0xbb, R1, R1
Same number of instructions.
Good:
4 less bytes (no constant pool entry)
One less load.
Bad:
Critical path is one instruction longer.
It's probably worth it to avoid the loads, they are expensive.
Dave Cheney got us some performance numbers: https://perf.golang.org/search?q=upload:20170426.1
TL;DR mean 1.37% improvement.
Change-Id: Ib206836161fdc94a3962db6f9caa635c87d57cf1
Reviewed-on: https://go-review.googlesource.com/41612
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This change adds line position tests for several yyerror calls in the
typechecker that are currently not tested in any way.
Untested yyerror calls were found by replacing them with
yerrorl(src.NoXPos, ...)
(thus destroying position information in the error), and then running
the test suite. No failures means no test coverage for the relevant
yyerror call.
For #19683
Change-Id: Iedb3d2f02141b332e9bfa76dbf5ae930ad2fddc3
Reviewed-on: https://go-review.googlesource.com/41477
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
doubleselect.go defines a flag to control the number of iterations,
but never called flag.Parse so it was unusable.
Change-Id: Ib5d0c7119e7f7c9a808dcc02d0d9cc6ba5bbc16e
Reviewed-on: https://go-review.googlesource.com/41299
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
At VARKILLs, zero a variable if it is ambiguously live.
After the VARKILL anything this variable references
might be collected. If it were to become live again later,
the GC will see references to already-collected objects.
We don't know a variable is ambiguously live until very
late in compilation (after lowering, register allocation, ...),
so it is hard to generate the code in an arch-independent way.
We also have to be careful not to clobber any registers.
Fortunately, this almost never happens so performance is ~irrelevant.
There are only 2 instances where this triggers in the stdlib.
Fixes#20029
Change-Id: Ia9585a91d7b823fad4a9d141d954464cc7af31f4
Reviewed-on: https://go-review.googlesource.com/41076
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Follow-up on https://go-review.googlesource.com/#/c/39998/
which dropped this information.
The reported blocks are the innermost blocks containing a
label jumped to from outside, not the outermost block as
reported originally by cmd/compile.
We could report the outermost block with a slighly more
involved algorithm (need to track containing blocks for
all unresolved forward gotos), but since gccgo also reports
the innermost blocks, the current approach seems good enough.
Change-Id: Ic0235b8fafe8d5f99dc9872b58e90e8d9e72c5db
Reviewed-on: https://go-review.googlesource.com/40980
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Marvin Stenger <marvin.stenger94@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Instead of a separate check control flow pass (checkcfg.go)
operating on nodes, perform this check at parse time on the
new syntax tree. Permits this check to be done concurrently,
and doesn't depend on the specifics of the symbol's dclstack
implementation anymore. The remaining dclstack uses will be
removed in a follow-up change.
- added CheckBranches Mode flag (so we can turn off the check
if we only care about syntactic correctness, e.g. for tests)
- adjusted test/goto.go error messages: the new branches
checker only reports if a goto jumps into a block, but not
which block (we may want to improve this again, eventually)
- also, the new branches checker reports one variable that
is being jumped over by a goto, but it may not be the first
one declared (this is fine either way)
- the new branches checker reports additional errors for
fixedbugs/issue14006.go (not crucial to avoid those errors)
- the new branches checker now correctly reports only
variable declarations being jumped over, rather than
all declarations (issue 8042). Added respective tests.
Fixes#8042.
Change-Id: I53b6e1bda189748e1e1fb5b765a8a64337c27d40
Reviewed-on: https://go-review.googlesource.com/39998
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Now only cmd/asm and cmd/compile depend on cmd/internal/obj. Changing
the assembler backends no longer requires reinstalling cmd/link or
cmd/addr2line.
There's also now one canonical definition of the object file format in
cmd/internal/objabi/doc.go, with a warning to update all three
implementations.
objabi is still something of a grab bag of unrelated code (e.g., flag
and environment variable handling probably belong in a separate "tool"
package), but this is still progress.
Fixes#15165.
Fixes#20026.
Change-Id: Ic4b92fac7d0d35438e0d20c9579aad4085c5534c
Reviewed-on: https://go-review.googlesource.com/40972
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
This rewrites runtime.Caller in terms of stackExpander, which already
handles inlined frames and partially skipped frames. This also has the
effect of making runtime.Caller understand cgo frames if there is a cgo
symbolizer.
Updates #19348.
Change-Id: Icdf4df921aab5aa394d4d92e3becc4dd169c9a6e
Reviewed-on: https://go-review.googlesource.com/40270
Run-TryBot: David Lazar <lazard@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
The fixedbugs/issue12536.go file was erroneously deleted just before
committing the patch that fixed the issue (CL 14400).
That's an easy test and there's a small reproducer in the issue, add
it back.
Updates #12536
Change-Id: Ib7b0cd245588299e9a5469e1d75805fd0261ce1a
Reviewed-on: https://go-review.googlesource.com/40712
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Also adjust truncfltlit to make it more similar to trunccmplxlit, and
make it report an error for bad Etypes.
Fixes#19947
Change-Id: I6684523e989c2293b8a8e85bd2bfb9c399c5ea36
Reviewed-on: https://go-review.googlesource.com/40453
Reviewed-by: Robert Griesemer <gri@golang.org>
When casting an ideal to complex{64,128}, for example during the
evaluation of
var a = complex64(0) / 1e-50
we want the compiler to report a division-by-zero error if a divisor
would be zero after the cast.
We already do this for floats; for example
var b = float32(0) / 1e-50
generates a 'division by zero' error at compile time (because
float32(1e-50) is zero, and the cast is done before performing the
division).
There's no such check in the path for complex{64,128} expressions, and
no cast is performed before the division in the evaluation of
var a = complex64(0) / 1e-50
which compiles just fine.
This patch changes the convlit1 function so that complex ideals
components (real and imag) are correctly truncated to float{32,64}
when doing an ideal -> complex{64, 128} cast.
Fixes#11674
Change-Id: Ic5f8ee3c8cfe4c3bb0621481792c96511723d151
Reviewed-on: https://go-review.googlesource.com/37891
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Continues outside of a loop are not allowed. Most of these possibilities
were tested in label1.go, but one was missing - a plain continue in a
switch/select but no enclosing loop.
This used to error with a "continue not in loop" in 1.8, but recently
was broken by c03e75e5. In particular, innerloop does not only account
for loops, but also for switches and selects. Swap it by bools that
track whether breaks and continues should be allowed.
While at it, improve the wording of errors for breaks that are not where
they should be. Change "loop" by "loop, switch, or select" since they
can be used in any of those.
And add tests to make sure this isn't broken again. Use a separate func
since I couldn't get the compiler to crash on f() itself, possibly due
to the recursive call on itself.
Fixes#19934.
Change-Id: I8f09c6c2107fd95cac50efc2a8cb03cbc128c35e
Reviewed-on: https://go-review.googlesource.com/40357
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
This avoids false positives
like those found in #19880.
Fixes#19880
Change-Id: I583c16cc3c71e7462a72500db9ea2547c468f8c1
Reviewed-on: https://go-review.googlesource.com/40255
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Given code such as
type T struct {
_ string
}
func f() {
var x = T{"space"}
// ...
}
the compiler rewrote the 'var x' line as
var x T
x._ = "space"
The compiler then rejected the assignment to
a blank field, thus rejecting valid code.
It also failed to catch a number of invalid assignments.
And there were insufficient checks for validity
when emitting static data, leading to ICEs.
To fix, check earlier for explicit blanks field names,
explicitly handle legit blanks in sinit,
and don't try to emit static data for nodes
for which typechecking has failed.
Fixes#19482
Change-Id: I594476171d15e6e8ecc6a1749e3859157fe2c929
Reviewed-on: https://go-review.googlesource.com/38006
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently we expand comparison with small constant strings into len check
and a sequence of byte comparisons. Generate 16/32/64-bit comparisons,
instead of bytewise on 386 and amd64. Also increase limits on what is
considered small constant string.
Shaves ~30kb (0.5%) from go executable.
This also updates test/prove.go to keep test case valid.
Change-Id: I99ae8871a1d00c96363c6d03d0b890782fa7e1d9
Reviewed-on: https://go-review.googlesource.com/38776
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Dupok symbols may be defined in multiple packages. Its associated
package is chosen sort of arbitrarily (the first containing package
that the linker loads). Canonicalize its package to the package
with which it will be laid down in text, which is the first package
in dependency order that defines the symbol. So later passes (for
example, trampoline insertion pass) know that the dupok symbol
is laid down along with the package.
Fixes#19764.
Change-Id: I7cbc7474ff3016d5069c8b7be04af934abab8bc3
Reviewed-on: https://go-review.googlesource.com/39150
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: David Chase <drchase@google.com>
Now that we no longer generate dead code,
it is possible to follow block predecessors
into infinite loops with no variable definitions,
causing an infinite loop during phi insertion.
To fix that, check explicitly whether the predecessor
is dead in lookupVarOutgoing, and if so, bail.
The loop in lookupVarOutgoing is very hot code,
so I am wary of adding anything to it.
However, a long, CPU-only benchmarking run shows no
performance impact at all.
Fixes#19783
Change-Id: I8ef8d267e0b20a29b5cb0fecd7084f76c6f98e47
Reviewed-on: https://go-review.googlesource.com/38913
Reviewed-by: David Chase <drchase@google.com>
The uintptr-typed Data field in reflect.SliceHeader and
reflect.StringHeader needs special treatment because it is
really a pointer. Add the special treatment in walk for
bug #19168 to escape analysis.
Includes extra debugging that was helpful.
Fixes#19743.
Change-Id: I6dab5002f0d436c3b2a7cdc0156e4fc48a43d6fe
Reviewed-on: https://go-review.googlesource.com/38738
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Previously, an inlined call to wg.Done() in package main would have the
following incorrect symbol name:
main.(*sync.WaitGroup).Done
This change modifies methodname to return the correct symbol name:
sync.(*WaitGroup).Done
This fix was suggested by @mdempsky.
Fixes#19467.
Change-Id: I0117838679ac5353789299c618ff8c326712d94d
Reviewed-on: https://go-review.googlesource.com/37866
Reviewed-by: Austin Clements <austin@google.com>
The `skip` argument passed to runtime.Caller and runtime.Callers should
be interpreted as the number of logical calls to skip (rather than the
number of physical stack frames to skip). This changes runtime.Callers
to skip inlined calls in addition to physical stack frames.
The result value of runtime.Callers is a slice of program counters
([]uintptr) representing physical stack frames. If the `skip` parameter
to runtime.Callers skips part-way into a physical frame, there is no
convenient way to encode that in the resulting slice. To avoid changing
the API in an incompatible way, our solution is to store the number of
skipped logical calls of the first frame in the _second_ uintptr
returned by runtime.Callers. Since this number is a small integer, we
encode it as a valid PC value into a small symbol called:
runtime.skipPleaseUseCallersFrames
For example, if f() calls g(), g() calls `runtime.Callers(2, pcs)`, and
g() is inlined into f, then the frame for f will be partially skipped,
resulting in the following slice:
pcs = []uintptr{pc_in_f, runtime.skipPleaseUseCallersFrames+1, ...}
We store the skip PC in pcs[1] instead of pcs[0] so that `pcs[i:]` will
truncate the captured stack trace rather than grow it for all i.
Updates #19348.
Change-Id: I1c56f89ac48c29e6f52a5d085567c6d77d499cf1
Reviewed-on: https://go-review.googlesource.com/37854
Run-TryBot: David Lazar <lazard@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Previously, we could not run tests with -l=4 on NaCl since the buildrun
action is not supported on NaCl. This lets us run tests with build flags
on NaCl.
Change-Id: I103370c7b823b4ff46f47df97e802da0dc2bc7c3
Reviewed-on: https://go-review.googlesource.com/38170
Run-TryBot: David Lazar <lazard@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Gccgo crashed compiling a function that returned multiple zero-sized values.
Change-Id: I499112cc310e4a4f649962f4d2bc9fee95dee1b6
Reviewed-on: https://go-review.googlesource.com/38772
Reviewed-by: Than McIntosh <thanm@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This was cherry-picked to 1.8 as CL 38587, but on master issue was fixed
by CL 37661. Add still relevant part (test) and close issue, since test passes.
Fixes#19201
Change-Id: I6415792e2c465dc6d9bd6583ba1e54b107bcf5cc
Reviewed-on: https://go-review.googlesource.com/37376
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Prior to this CL, Type.Width != 0 was the mark
of a Type whose Width had been calculated.
As a result, dowidth always recalculated
the width of struct{}.
This, combined with the prohibition on calculating
the width of a FuncArgsStruct and the use of
struct{} as a function argument,
meant that there were circumstances in which
it was forbidden to call dowidth on a type.
This inhibits refactoring to call dowidth automatically,
rather than explicitly.
Instead add a helper method, Type.WidthCalculated,
and implement as Type.Align > 0.
Type.Width is not a good candidate for tracking
whether the width has been calculated;
0 is a value type width, and Width is subject to
too much magic value game-playing.
For good measure, add a test for #11354.
Change-Id: Ie9a9fb5d924e7a2010c1904ae5e38ed4a38eaeb2
Reviewed-on: https://go-review.googlesource.com/38468
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Ensure that we have a test for when the compiler
encounters a type switch on a non-interface value.
Change-Id: Icb222f986894d0190e1241ca65396b4950e7d14f
Reviewed-on: https://go-review.googlesource.com/38661
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Avoid construction of incorrect syntax trees in presence of errors.
For #19663.
Change-Id: I43025a3cf0fe02cae9a57e8bb9489b5f628c3fd7
Reviewed-on: https://go-review.googlesource.com/38604
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Simple phi insertion already had a heuristic to check
for dead blocks, namely having no predecessors.
When we stopped generating code for dead blocks,
we eliminated some values contained in more subtle
dead blocks, which confused phi insertion.
Compensate by beefing up the reachability check.
Fixes#19678
Change-Id: I0081e4a46f7ce2f69b131a34a0553874a0cb373e
Reviewed-on: https://go-review.googlesource.com/38602
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
CL 37499 allows inlining more functions by ignoring dead code.
However, that dead code can contain non-exportable constructs.
Teach the exporter not to export dead code.
Fixes#19679
Change-Id: Idb1d3794053514544b6f1035d29262aa6683e1e7
Reviewed-on: https://go-review.googlesource.com/38601
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Almost never happens in practice.
The compiler will generate reasonable code anyway,
since assignments involving [0]T never do any work.
Fixes#19696Fixes#19671
Change-Id: I350d2e0c5bb326c4789c74a046ab0486b2cee49c
Reviewed-on: https://go-review.googlesource.com/38599
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Previously, we handled recursive interfaces by deferring typechecking
of interface methods, while eagerly expanding interface embeddings.
This CL switches to eagerly evaluating interface methods, and
deferring expanding interface embeddings to dowidth. This allows us to
detect recursive interface embeddings with the same mechanism used for
detecting recursive struct embeddings.
Updates #16369.
Change-Id: If4c0320058047f8a2d9b52b9a79de47eb9887f95
Reviewed-on: https://go-review.googlesource.com/38391
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Report syntax error that was missed when moving to new parser.
Fixes#19610.
Change-Id: Ie5625f907a84089dc56fcccfd4f24df546042783
Reviewed-on: https://go-review.googlesource.com/38375
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
See https://go-review.googlesource.com/#/c/38313/ for background.
It turns out that only a few tests checked for this.
The new error message is shorter and very clear.
Change-Id: I8ab4ad59fb023c8b54806339adc23aefd7dc7b07
Reviewed-on: https://go-review.googlesource.com/38314
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Implement math/bits.TrailingZerosX using intrinsics.
Generally reorganize the intrinsic spec a bit.
The instrinsics data structure is now built at init time.
This will make doing the other functions in math/bits easier.
Update sys.CtzX to return int instead of uint{64,32} so it
matches math/bits.TrailingZerosX.
Improve the intrinsics a bit for amd64. We don't need the CMOV
for <64 bit versions.
Update #18616
Change-Id: Ic1c5339c943f961d830ae56f12674d7b29d4ff39
Reviewed-on: https://go-review.googlesource.com/38155
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Interface wrapper functions now get compiled eagerly in some cases.
Consequently, they may be present in multiple translation units.
Mark them as DUPOK, just like closures.
Fixes#19548Fixes#19550
Change-Id: Ibe74adb5a62dbf6447db37fde22dcbb3479969ef
Reviewed-on: https://go-review.googlesource.com/38156
Reviewed-by: David Chase <drchase@google.com>
With this change, code like
h := sha1.New()
h.Write(buf)
sum := h.Sum()
gets compiled into static calls rather than
interface calls, because the compiler is able
to prove that 'h' is really a *sha1.digest.
The InterCall re-write rule hits a few dozen times
during make.bash, and hundreds of times during all.bash.
The most common pattern identified by the compiler
is a constructor like
func New() Interface { return &impl{...} }
where the constructor gets inlined into the caller,
and the result is used immediately. Examples include
{sha1,md5,crc32,crc64,...}.New, base64.NewEncoder,
base64.NewDecoder, errors.New, net.Pipe, and so on.
Some existing benchmarks that change on darwin/amd64:
Crc64/ISO4KB-8 2.67µs ± 1% 2.66µs ± 0% -0.36% (p=0.015 n=10+10)
Crc64/ISO1KB-8 694ns ± 0% 690ns ± 1% -0.59% (p=0.001 n=10+10)
Adler32KB-8 473ns ± 1% 471ns ± 0% -0.39% (p=0.010 n=10+9)
On architectures like amd64, the reduction in code size
appears to contribute more to benchmark improvements than just
removing the indirect call, since that branch gets predicted
accurately when called in a loop.
Updates #19361
Change-Id: I57d4dc21ef40a05ec0fbd55a9bb0eb74cdc67a3d
Reviewed-on: https://go-review.googlesource.com/38139
Run-TryBot: Philip Hofer <phofer@umich.edu>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This reverts commit 4e0c7c3f61.
Reason for revert: The presence-of-optimization test program is fragile, breaks under noopt, and might break if the Go libraries are tweaked. It needs to be (re)written without reference to other packages.
Change-Id: I3aaf1ab006a1a255f961a978e9c984341740e3c7
Reviewed-on: https://go-review.googlesource.com/38097
Reviewed-by: Keith Randall <khr@golang.org>
Move the zeroing of results earlier. In particular, they need to
come before any move-to-heap operations, as those require allocation.
Those allocations are points at which the GC can see the uninitialized
result slots.
For the function:
func f() (x, y, z *int) {
defer(){}()
escape(&y)
return
}
We used to generate code like this:
x = nil
y = nil
&y = new(int)
z = nil
Now we will generate:
x = nil
y = nil
z = nil
&y = new(int)
Since the fix for #18860, the return slots are always live if there
is a defer, so the former ordering allowed the GC to see junk
in the z slot.
Fixes#19078
Change-Id: I71554ae437549725bb79e13b2c100b2911d47ed4
Reviewed-on: https://go-review.googlesource.com/38133
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
With this change, code like
h := sha1.New()
h.Write(buf)
sum := h.Sum()
gets compiled into static calls rather than
interface calls, because the compiler is able
to prove that 'h' is really a *sha1.digest.
The InterCall re-write rule hits a few dozen times
during make.bash, and hundreds of times during all.bash.
The most common pattern identified by the compiler
is a constructor like
func New() Interface { return &impl{...} }
where the constructor gets inlined into the caller,
and the result is used immediately. Examples include
{sha1,md5,crc32,crc64,...}.New, base64.NewEncoder,
base64.NewDecoder, errors.New, net.Pipe, and so on.
Some existing benchmarks that change on darwin/amd64:
Crc64/ISO4KB-8 2.67µs ± 1% 2.66µs ± 0% -0.36% (p=0.015 n=10+10)
Crc64/ISO1KB-8 694ns ± 0% 690ns ± 1% -0.59% (p=0.001 n=10+10)
Adler32KB-8 473ns ± 1% 471ns ± 0% -0.39% (p=0.010 n=10+9)
On architectures like amd64, the reduction in code size
appears to contribute more to benchmark improvements than just
removing the indirect call, since that branch gets predicted
accurately when called in a loop.
Updates #19361
Change-Id: Ia9d30afdd5f6b4d38d38b14b88f308acae8ce7ed
Reviewed-on: https://go-review.googlesource.com/37751
Run-TryBot: Philip Hofer <phofer@umich.edu>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Compiler errors now show the exact line and line byte offset (sometimes
called "column") of where an error occured. For `go tool compile x.go`:
package p
const c int = false
//line foo.go:123
type t intg
reports
x.go:2:7: cannot convert false to type int
foo.go:123[x.go:4:8]: undefined: intg
(Some errors use the "wrong" position for the error message; arguably
the byte offset for the first error should be 15, the position of 'false',
rathen than 7, the position of 'c'. But that is an indepedent issue.)
The byte offset (column) values are measured in bytes; they start at 1,
matching the convention used by editors and IDEs.
Positions modified by //line directives show the line offset only for the
actual source location (in square brackets), not for the "virtual" file and
line number because that code is likely generated and the //line directive
only provides line information.
Because the new format might break existing tools or scripts, printing
of line offsets can be disabled with the new compiler flag -C. We plan
to remove this flag eventually.
Fixes#10324.
Change-Id: I493f5ee6e78457cf7b00025aba6b6e28e50bb740
Reviewed-on: https://go-review.googlesource.com/37970
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
After benchmarking with a compiler modified to have better
spill location, it became clear that this method of checking
was actually faster on (at least) two different architectures
(ppc64 and amd64) and it also provides more timely interruption
of loops.
This change adds a modified FOR loop node "FORUNTIL" that
checks after executing the loop body instead of before (i.e.,
always at least once). This ensures that a pointer past the
end of a slice or array is not made visible to the garbage
collector.
Without the rescheduling checks inserted, the restructured
loop from this change apparently provides a 1% geomean
improvement on PPC64 running the go1 benchmarks; the
improvement on AMD64 is only 0.12%.
Inserting the rescheduling check exposed some peculiar bug
with the ssa test code for s390x; this was updated based on
initial code actually generated for GOARCH=s390x to use
appropriate OpArg, OpAddr, and OpVarDef.
NaCl is disabled in testing.
Change-Id: Ieafaa9a61d2a583ad00968110ef3e7a441abca50
Reviewed-on: https://go-review.googlesource.com/36206
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This commit reworks multiway select statements to use normal control
flow primitives instead of the previous setjmp/longjmp-like behavior.
This simplifies liveness analysis and should prevent issues around
"returns twice" function calls within SSA passes.
test/live.go is updated because liveness analysis's CFG is more
representative of actual control flow. The case bodies are the only
real successors of the selectgo call, but previously the selectsend,
selectrecv, etc. calls were included in the successors list too.
Updates #19331.
Change-Id: I7f879b103a4b85e62fc36a270d812f54c0aa3e83
Reviewed-on: https://go-review.googlesource.com/37661
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
When defining an int const, the compiler tries to cast the RHS
expression to int. The cast may fail for three reasons:
1. expr is an integer constant that overflows int
2. expr is a floating point constant
3. expr is a complex constant, or not a number
In the second case, in order to print a sensible error message, we
must distinguish between a floating point constant that should be
included in the error message and a floating point constant that
cannot be reasonably formatted for inclusion in an error message.
For example, in:
const a int = 1.1
const b int = 1 + 1e-100
a is in the former group, while b is in the latter, since the floating
point value resulting from the evaluation of the rhs of the assignment
(1.00...01) is too long to be fully printed in an error message, and
cannot be shortened without making the error message misleading
(rounding or truncating it would result in a "1", which looks like an
integer constant, and it makes little sense in an error message about
an invalid floating point expression).
To fix this problem, we try to format the float value using fconv
(which is used by the error reporting mechanism to format float
arguments), and then parse the resulting string back to a
big.Float. If the result is an integer, we assume that expr is a float
value that cannot be reasonably be formatted as a string, and we emit
an error message that does not include its string representation.
Also, change the error message for overflows to a more conservative
"integer too large", which does not mention overflows that are only
caused by an internal implementation restriction.
Also, change (*Mpint) SetFloat so that it returns a bool (instead of
0/-1 for success/failure).
Fixes#11371
Change-Id: Ibbc73e2ed2eaf41f07827b0649d0eb637150ecaa
Reviewed-on: https://go-review.googlesource.com/35411
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
