In Go 1.5, Config.Certificates is no longer required if
Config.GetCertificate has been set. This change updated four comments to
reflect that.
Change-Id: Id72cc22fc79e931b2d645a7c3960c3241042762c
Reviewed-on: https://go-review.googlesource.com/13800
Reviewed-by: Adam Langley <agl@golang.org>
The existing implementation didn't use the CLMUL instructions for fast
and constant time binary-field multiplication. With this change, amd64
CPUs that support both AES and CLMUL instructions will use an optimised
asm implementation.
benchmark old ns/op new ns/op delta
BenchmarkAESGCMSeal8K 91723 3200 -96.51%
BenchmarkAESGCMOpen8K 91487 3324 -96.37%
BenchmarkAESGCMSeal1K 11873 546 -95.40%
BenchmarkAESGCMOpen1K 11833 594 -94.98%
benchmark old MB/s new MB/s speedup
BenchmarkAESGCMSeal8K 89.31 2559.62 28.66x
BenchmarkAESGCMOpen8K 89.54 2463.78 27.52x
BenchmarkAESGCMSeal1K 86.24 1872.49 21.71x
BenchmarkAESGCMOpen1K 86.53 1721.78 19.90x
Change-Id: Idd63233098356d8b353d16624747b74d0c3f193e
Reviewed-on: https://go-review.googlesource.com/10484
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
Go 1.5 allowed TLS connections where Config.Certificates was nil as long
as the GetCertificate callback was given. However, tls.Listen wasn't
updated accordingly until this change.
Change-Id: I5f67f323f63c988ff79642f3daf8a6b2a153e6b2
Reviewed-on: https://go-review.googlesource.com/13801
Reviewed-by: Adam Langley <agl@golang.org>
Recursive types R containing slices of R's did not terminate despite the
effort in CL 10821.
For recursive types there was a competition between slice expansion by a
factor 'complexSize', and termination with probability '1/complexSize'
which lead to stack overflow as soon as a recursive struct had slices
pointing to its own type.
Fix this by shrinking the size hint as a function of recursion depth.
This has the dual effect of reducing the number of elements generated
per slice and also increasing the probability for termination.
Fixes#11148.
Change-Id: Ib61155b4f2e2de3873d508d63a1f4be759426d67
Reviewed-on: https://go-review.googlesource.com/13830
Reviewed-by: Adam Langley <agl@golang.org>
For primes which are 3 mod 4, using Tonelli-Shanks is slower
and more complicated than using the identity
a**((p+1)/4) mod p == sqrt(a)
For 2^450-2^225-1 and 2^10860-2^5430-1, which are 3 mod 4:
BenchmarkModSqrt225_TonelliTri 1000 1135375 ns/op
BenchmarkModSqrt225_3Mod4 10000 156009 ns/op
BenchmarkModSqrt5430_Tonelli 1 3448851386 ns/op
BenchmarkModSqrt5430_3Mod4 2 914616710 ns/op
~2.6x to 7x faster.
Fixes#11437 (which is a prime choice of issues to fix)
Change-Id: I813fb29454160483ec29825469e0370d517850c2
Reviewed-on: https://go-review.googlesource.com/11522
Reviewed-by: Adam Langley <agl@golang.org>
Val.Ctype used to be struct field, it's now a method.
Change-Id: I08f0b32b66dba15b2a392e84a557efb905b530cb
Reviewed-on: https://go-review.googlesource.com/14031
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The code is now in cmd/vendor/golang.org/x/arch.
Change-Id: I518d48c21b0d7fed914552b89ee41411f088456b
Reviewed-on: https://go-review.googlesource.com/14021
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
For use by cmd/objdump in place of the current cmd/internal/rsc.io/... tree.
Change-Id: I7d765ddf43ab4118a3221fd755ff0a2a02daa5de
Reviewed-on: https://go-review.googlesource.com/13979
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Right now we find out implicitly if stack barriers are in place,
or defers. This change makes sure we find out about short
unwinds always.
Change-Id: Ibdde1ba9c79eb792660dcb7aa6f186e4e4d559b3
Reviewed-on: https://go-review.googlesource.com/13966
Reviewed-by: Austin Clements <austin@google.com>
Start go1.6.txt with a note that nacl ports are no longer
restricted to pepper_41 and a record of the text/template change.
Change-Id: I21dda64aec113c35caf1d565f29e3aac8171480a
Reviewed-on: https://go-review.googlesource.com/14004
Reviewed-by: Rob Pike <r@golang.org>
GetMUIStringValue tries as a convenience to resolve string values even for pathless
resource DLLs by searching the system directory (one of several paths used
by the system's standard DLL search order algorithm). This would not be
needed if regLoadMUIString searched for pathless DLLs itself, but it
doesn't, instead it needs an absolute path, otherwise it will fail.
This approach works fine for solving issue #12015 (handle localized time
zone names; for which GetMUIStringValue was created) since tzres.dll that
is used to resolve localized time zone names has no path in the registry
but is located under the system directory.
However, this approach will fail if a pathless DLL is located somewhere
else than the system directory.
Because of this limitation GetMUIStringValue may have to be revised in the
future to allow for custom paths, possibly through another version of the
function.
See also:
https://msdn.microsoft.com/en-us/library/windows/desktop/ms724890%28v=vs.85%29.aspxhttps://msdn.microsoft.com/en-us/library/windows/desktop/ms682586%28v=vs.85%29.aspx
Change-Id: Ida66a0ef1928e0461ce248c795827902d785e6cd
Reviewed-on: https://go-review.googlesource.com/13929
Reviewed-by: Rob Pike <r@golang.org>
Fixes#11961
Minux removed the use of SRPC in 003dccfa, but the SRPC name service
code was left in the tree. SRPC was removed in pepper_42 making the
code, which ran on startup, fail, even though it was not used.
Removing srpc_nacl.go for a total diff of -822 lines has got to count
as one of the easiest nacl fixes we've had to date.
Change-Id: Ic4e348146bfe47450bbb9cabb91699ba153e6bf0
Reviewed-on: https://go-review.googlesource.com/13958
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Issue 6754 reports that Go bzip2 Decode function is much slower
(about 2.5x in go1.5) than the Python equivalent (which is
actually just a wrapper around the usual C library) on random data.
Profiling the code shows that half a dozen of CMP instructions in a
tight loop are responsibile for most of the execution time.
This patch reduces the number of branches of the loop, greatly
improving performance on random data and speeding up decoding of
real data.
name old time/op new time/op delta
DecodeDigits-4 9.28ms ± 1% 8.05ms ± 1% -13.18% (p=0.000 n=15+14)
DecodeTwain-4 28.9ms ± 2% 26.4ms ± 1% -8.57% (p=0.000 n=15+14)
DecodeRand-4 3.94ms ± 1% 3.06ms ± 1% -22.45% (p=0.000 n=15+14)
name old speed new speed delta
DecodeDigits-4 4.65MB/s ± 1% 5.36MB/s ± 1% +15.21% (p=0.000 n=13+14)
DecodeTwain-4 4.32MB/s ± 2% 4.72MB/s ± 1% +9.36% (p=0.000 n=15+14)
DecodeRand-4 4.27MB/s ± 1% 5.51MB/s ± 1% +28.86% (p=0.000 n=15+14)
I've run some benchmark comparing Go bzip2 implementation with the
usual Linux bzip2 command (which is written in C). On my machine
this patch brings go1.5
from ~2.26x to ~1.50x of bzip2 time (on 64MB random data)
from ~1.70x to ~1.50x of bzip2 time (on 100MB english text)
from ~2.00x to ~1.88x of bzip2 time (on 64MB /dev/zero data)
Fixes#6754
Change-Id: I3cb12d2c0c2243c1617edef1edc88f05f91d26d1
Reviewed-on: https://go-review.googlesource.com/13853
Reviewed-by: Nigel Tao <nigeltao@golang.org>
If we're going to do this for Go 1.6 we might as well do it now
and find out what breaks.
Change-Id: I8306b7829d8d13b564a1466c902ec6ba1a5a58c1
Reviewed-on: https://go-review.googlesource.com/13967
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This worked in Go 1.4 but was lost in the "pure Go" lookup
routines substituted late in the Go 1.5 cycle.
Fixes#12263.
Change-Id: I77ec9d97cd8e67ace99d6ac965e5bc16c151ba83
Reviewed-on: https://go-review.googlesource.com/13915
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Setgroups with zero-length groups is no-op for changing groups and
supposed to be used only for determining curent groups length. Also
because we deny setgroups by default if use GidMappings we have
unnecessary error from that no-op syscall.
Change-Id: I8f74fbca9190a3dcbbef1d886c518e01fa05eb62
Reviewed-on: https://go-review.googlesource.com/13938
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Change-Id: I63bf6d2fdf41b49ff8783052d5d6c53b20e2f050
Reviewed-on: https://go-review.googlesource.com/13760
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
For ARM machines, the assembler supports list of registers
operands such as [R1,R2].
A list missing a ']' results in the parser issuing many errors
and consuming all the tokens. At EOF (i.e. end of the line),
it still loops.
Normally, a counter is maintained to make sure the parser
stops after 10 errors. However, multiple errors occuring on the
same line are simply ignored. Only the first one is reported.
At most one error per line is accounted.
Missing ']' in a register list therefore results in an
infinite loop.
Fixed the parser by explicitly checking for ']' to interrupt
this loops
In the operand tests, also fixed a wrong entry which I think was
not set on purpose (but still led to a successful result).
Fixes#11764
Change-Id: Ie87773388ee0d21b3a2a4cb941d4d911d0230ba4
Reviewed-on: https://go-review.googlesource.com/13920
Reviewed-by: Rob Pike <r@golang.org>
I noticed that they were unimplemented on arm64 but then that they were
in fact not used at all.
Change-Id: Iee579feda2a5e374fa571bcc8c89e4ef607d50f6
Reviewed-on: https://go-review.googlesource.com/13951
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Accepting a request with a nil body was never explicitly supported but
happened to work in the past.
This doesn't happen in most cases because usually people pass
a Server's incoming Request to the ReverseProxy's ServeHTTP method,
and incoming server requests are guaranteed to have non-nil bodies.
Still, it's a regression, so fix.
Fixes#12344
Change-Id: Id9a5a47aea3f2875d195b66c9a5f8581c4ca2aed
Reviewed-on: https://go-review.googlesource.com/13935
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Not needed anymore since go/types is always built against the current
standard library.
Fixes#11538.
Change-Id: I2f07d73703f4e5661c4b5df5d487939dcf530b43
Reviewed-on: https://go-review.googlesource.com/13897
Reviewed-by: Alan Donovan <adonovan@google.com>
byte is unsigned so the comparison against zero is always true.
Change-Id: I8fa60245972be362ae920507a291f92c0f9831ad
Reviewed-on: https://go-review.googlesource.com/13941
Run-TryBot: Todd Neal <todd@tneal.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The existing implementation fails to determine the correct time zone
abbreviations when the display language is non-English. This change adds
support for localized time zone names (standard- and daylightname)
by using the function RegLoadMUIString.
Fixes#12015
Change-Id: Ic0dc89c50993af8f292b199c20bc5932903e7e87
Reviewed-on: https://go-review.googlesource.com/13854
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fixes#12083
Change-Id: I8256739b33cf08d84dec23120d527667de2e6eea
Reviewed-on: https://go-review.googlesource.com/13822
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
s is a uint32 and can never be zero. It's max value is already tested
against sig.wanted, whose size is derived from _NSIG. This also
matches the test in signal_enable.
Fixes#11282
Change-Id: I8eec9c7df8eb8682433616462fe51b264c092475
Reviewed-on: https://go-review.googlesource.com/13940
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
No longer used after previous hashmap change.
Change-Id: I558470f872281e84a78406132df4e391d077b833
Reviewed-on: https://go-review.googlesource.com/13785
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
If an exported function has named return variables, then show the names
as comments in the return struct we create in the header file.
Example here:
https://groups.google.com/forum/#!topic/golang-nuts/r393ne4zIfY
Change-Id: I21fb4ca2673f6977bec35ccab0cef7d42b311f96
Reviewed-on: https://go-review.googlesource.com/13061
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Previously t.zero always pointed to runtime.zerovalue. Change the hashmap code
to always return a runtime pointer directly, and change that pointer to point
to a larger buffer if one is needed.
(It might be better to only copy from the pointer returned by the mapaccess
functions when the value type is small enough and have the compiler insert
explicit zeroing for larger value types, but I tried and failed to do this).
This removes all uses of the zero field of the type data; the field itself can
be removed in a separate change.
Fixes#11491
Change-Id: I5b81752ff4067d74a5a281c41e88f151bae0171e
Reviewed-on: https://go-review.googlesource.com/13784
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This was always a bit confusing, but it also fixes a problem: runtime.firstmoduledata
was always overridden in the linker to be a local symbol but cmd/internal/obj had
already rewritten code accessing it to access it via the GOT. This works on amd64, but
causes link failures on other platforms (e.g. arm64).
Change-Id: I9b8153af74b4d0f092211d63a000d15818f39773
Reviewed-on: https://go-review.googlesource.com/13786
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The issue 12226 has been caused by the allocation of the same register
for the equality check of two byte values. The code in cgen.go freed the
register for the second operand before the allocation of the register
for the first operand.
Fixes#12226
Change-Id: Ie4dc33a488bd48a17f8ae9b497fd63c1ae390555
Reviewed-on: https://go-review.googlesource.com/13771
Reviewed-by: Russ Cox <rsc@golang.org>
A comparison of the form l == r where l is an interface and r is
concrete performs a type assertion on l to convert it to r's type.
However, the compiler fails to zero the temporary where the result of
the type assertion is written, so if the type is a pointer type and a
stack scan occurs while in the type assertion, it may see an invalid
pointer on the stack.
Fix this by zeroing the temporary. This is equivalent to the fix for
type switches from c4092ac.
Fixes#12253.
Change-Id: Iaf205d456b856c056b317b4e888ce892f0c555b9
Reviewed-on: https://go-review.googlesource.com/13872
Reviewed-by: Russ Cox <rsc@golang.org>
nmspinning has a value range of [0, 2^31-1]. Update the comment to
indicate this and fix the comparison so it's not always false.
Fixes#11280
Change-Id: Iedaf0654dcba5e2c800645f26b26a1a781ea1991
Reviewed-on: https://go-review.googlesource.com/13877
Reviewed-by: Minux Ma <minux@golang.org>
gobuf.g is a guintptr, so without hex(), it will be printed as
a decimal, which is not very helpful and inconsistent with how
other pointers are printed.
Change-Id: I7c0432e9709e90a5c3b3e22ce799551a6242d017
Reviewed-on: https://go-review.googlesource.com/13879
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Simplify slice/map literal expressions.
Caught with gofmt -d -s, fixed with gofmt -w -s
Reformatted some expressions to improve readability.
Change-Id: Iaf123e6bd49162ec45c59297ad3b002ca59443bc
Reviewed-on: https://go-review.googlesource.com/13850
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
