obj.ProgInfo is a field inside obj.Prog, which is currently 320 bytes
on 64bit platforms. By moving the Flags field below the other fields
the size of obj.Prog drops into the 288 byte size class, a saving of
32 bytes per value allocated on the heap.
Change-Id: If8bb12f45328996d7df1d0bac9d1c019d2af73bd
Reviewed-on: https://go-review.googlesource.com/15522
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Change-Id: Ic19c94fe0af55e17f6c2fcfd36085ccb1584da6f
Reviewed-on: https://go-review.googlesource.com/15608
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Go shared libraries do not support dlclose, and there is no likelihood
that they will suppose dlclose in the future. Set the DF_1_NODELETE
flag to tell the dynamic linker to not attempt to remove them from
memory. This makes the shared library act as though every call to
dlopen passed the RTLD_NODELETE flag.
Fixes#12582.
Update #11100.
Update #12873.
Change-Id: Id4b6e90a1b54e2e6fc8355b5fb22c5978fc762b4
Reviewed-on: https://go-review.googlesource.com/15605
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Improve the aeshash implementation to make it harder to engineer collisions.
1) Scramble the seed before xoring with the input string. This
makes it harder to cancel known portions of the seed (like the size)
because it mixes the per-table seed into those other parts.
2) Use table-dependent seeds for all stripes when hashing >16 byte strings.
For small strings this change uses 4 aesenc ops instead of 3, so it
is somewhat slower. The first two can run in parallel, though, so
it isn't 33% slower.
benchmark old ns/op new ns/op delta
BenchmarkHash64-12 10.2 11.2 +9.80%
BenchmarkHash16-12 5.71 6.13 +7.36%
BenchmarkHash5-12 6.64 7.01 +5.57%
BenchmarkHashBytesSpeed-12 30.3 31.9 +5.28%
BenchmarkHash65536-12 2785 2882 +3.48%
BenchmarkHash1024-12 53.6 55.4 +3.36%
BenchmarkHashStringArraySpeed-12 54.9 56.5 +2.91%
BenchmarkHashStringSpeed-12 18.7 19.2 +2.67%
BenchmarkHashInt32Speed-12 14.8 15.1 +2.03%
BenchmarkHashInt64Speed-12 14.5 14.5 +0.00%
Change-Id: I59ea124b5cb92b1c7e8584008257347f9049996c
Reviewed-on: https://go-review.googlesource.com/14124
Reviewed-by: jcd . <jcd@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Following the C to Go translation, some useless variables
were left in the code. In fmt.go, this was harmless.
In lex.go, it broke the error message related to
non-canonical import paths.
Fix it, and remove the useless variables.
The added test case is ignored in the go/types tests, since
the behavior of the non-canonical import path check seems
to be different.
Fixes#11362
Change-Id: Ic9129139ede90357dc79ebf167af638cf44536fa
Reviewed-on: https://go-review.googlesource.com/15580
Reviewed-by: Marvin Stenger <marvin.stenger94@gmail.com>
Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It's particularly nice to get rid of the android special cases in the linker.
Change-Id: I516363af7ce8a6b2f196fe49cb8887ac787a6dad
Reviewed-on: https://go-review.googlesource.com/14197
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Copy math package CL 12230 to cmplx package.
Change-Id: I3345b782b84b5b98e2b6a60d8774c7e7cede2891
Reviewed-on: https://go-review.googlesource.com/15500
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The self tests do not need to build the binary; they won't read it. The
self tests should work on any ELF system.
Use t.Skip instead of panic. Use internal/testenv. Don't worry about a
space in the temporary directory name.
Change-Id: I66ef0af90520d330820afa7b6c6b3a132ab27454
Reviewed-on: https://go-review.googlesource.com/15495
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The <importPath>/_test directory is not actually created in -n mode, so
`go test` fails to write _testmain.go.
Do not write _testmain.go if -n is passed.
Change-Id: I825d5040cacbc9d9a8c89443e5a3f83e6f210ce4
Reviewed-on: https://go-review.googlesource.com/15433
Reviewed-by: Andrew Gerrand <adg@golang.org>
In particular, don't assume that one reflect.Value can be assigned to another just because they have the same reflect.Kind.
Fixes#12401
Change-Id: Ia4605a5c46557ff8f8f1d44f26d492850666c6d1
Reviewed-on: https://go-review.googlesource.com/15420
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In CL 14836, the implementation of duffcopy on amd64
was changed to replace the use of the MOVQ instructions
by MOVUPS.
However, it broke the build on plan9/amd64, since
Plan 9 doesn't allow floating point in note handler.
This change disables the use of duffcopy on Plan 9.
Fixes#12829.
Change-Id: Ifd5b17b17977a1b631b16c3dfe2dc7ab4ad00507
Reviewed-on: https://go-review.googlesource.com/15421
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Motivation:
* The logic to verify the numEntries can overflow and incorrectly
pass, allowing a malicious file to allocate arbitrary memory.
* The use of strconv.ParseInt does not set the integer precision
to 64bit, causing this code to work incorrectly on 32bit machines.
Change-Id: I1b1571a750a84f2dde97cc329ed04fe2342aaa60
Reviewed-on: https://go-review.googlesource.com/15173
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
A recursive call to Reader.Next did not check the error before
trying to use the result, leading to a nil pointer panic.
This specific CL addresses the immediate issue, which is the panic,
but does not solve the root issue, which is due to an integer
overflow in the base-256 parser.
Updates #12435
Change-Id: Ia908671f0f411a409a35e24f2ebf740d46734072
Reviewed-on: https://go-review.googlesource.com/15437
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It is generally expected that the ELF flags of a dynamically linked executable
and the libraries it links against match. Go's linker currently always produces
executables with flags that do not declare a float abi (hard, soft) at all, but
when cgo is involved it is unlikely that this matches the system libraries
being linked against -- really the decision about ABI is made by the C compiler
during the invocation of cgo.
This change is basically a port of the code from binutils that parses the
".ARM.attributes" section to check for the tag that declares that the code is
built for the hard-float ABI.
Fixes#7094
Change-Id: I737c8f3b5ed4af545cfc3e86722d03eb83083402
Reviewed-on: https://go-review.googlesource.com/14860
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
Change-Id: Id6cb5e3d40e8a2ded6359aa7fcdc012861cc3994
Reviewed-on: https://go-review.googlesource.com/14545
Reviewed-by: Andrew Gerrand <adg@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Motivation:
* There are an increasing number of "one-off" corrupt files added
to make sure that package does not succeed or crash on them.
Instead, allow for the test to specify the error that is expected
to occur (if any).
* Also, fold in the logic to check the MD5 checksum into this
function.
The following tests are being removed:
* TestIncrementalRead: Done by TestReader by using io.CopyBuffer
with a buffer of 8. This achieves the same behavior as this test.
* TestSparseEndToEnd: Since TestReader checks the MD5 checksums
if the input corpus provides them, then this is redundant.
* TestSparseIncrementalRead: Redundant for the same reasons that
TestIncrementalRead is now redundant
* TestNegativeHdrSize: Added to TestReader corpus
* TestIssue10968: Added to TestReader corpus
* TestIssue11169: Added to TestReader corpus
With this change, code coverage did not change: 85.3%
Change-Id: I8550d48657d4dbb8f47dfc3dc280758ef73b47ec
Reviewed-on: https://go-review.googlesource.com/15176
Reviewed-by: Andrew Gerrand <adg@golang.org>
This lets us re-enable duffzero.
Fixes#12108
Change-Id: Iefd24d26eaa56067caa2c29ff99cd20a42d8714a
Reviewed-on: https://go-review.googlesource.com/14937
Reviewed-by: Keith Randall <khr@golang.org>
Let C be whether c valid
Let E be whether err is non-nil
The old comment explicitly says that (~C → E). However, that does call
into question whether (E → ~C), which causes doubts for users.
Without a comment at all, it is obvious that only (E ↔ ~C) makes sense.
Fixes#11308
Change-Id: I5a7d51ceb509057eccca91f57a7e48c9d1c6d112
Reviewed-on: https://go-review.googlesource.com/15256
Reviewed-by: Andrew Gerrand <adg@golang.org>
The later part of the docstring simply talks about "offset" but does
not disambiguate what it is relative to. For both the return value
and valid offsets to seek to, it only makes sense in the context of
"offset relative to origin of file".
Fixes#11877
Change-Id: Ic238a407cf8e8fdd64991d98a6584cdc8a51cd6b
Reviewed-on: https://go-review.googlesource.com/15257
Reviewed-by: Andrew Gerrand <adg@golang.org>
Usage of all commands is printed to stderr, except go test, which is printed to
stdout. This is inconsistent.
Print `go test -help` to stderr instead.
R=rsc@golang.org
Change-Id: I079f4788134bf9aedcccc26838879eedad1c925e
Reviewed-on: https://go-review.googlesource.com/15434
Reviewed-by: Andrew Gerrand <adg@golang.org>
The net package already has support for limited uses of the strconv
package. Despite this, a few uses of strconv have crept in over time.
Remove them and use the existing net support instead.
Change-Id: Icdb4bdaa8e1197f1119a96cddcf548ed4a551b74
Reviewed-on: https://go-review.googlesource.com/15400
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
cgo panics in Package.rewriteRef for:
var a = C.enum_test(1)
or
p := new(C.enum_test)
when the corresponding enum type is not defined.
Check nil values for Type fields and issue a proper
error instead.
Fixes#11097
Updates #12160
Change-Id: I5821d29097ef0a36076ec5273125b09846c7d832
Reviewed-on: https://go-review.googlesource.com/15264
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The existing serve() method returns a zero-length response body when
it encounters an error, which results in a blank page and no visible
error in browsers.
This change sends a response body explaining the error for display in browsers.
Fixes#12745
Change-Id: I9dc3b95ad88cb92c18ced51f6b52bd3b2c1b974c
Reviewed-on: https://go-review.googlesource.com/15018
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The current heap sampling introduces some bias that interferes
with unsampling, producing unexpected heap profiles.
The solution is to use a Poisson process to generate the
sampling points, using the formulas described at
https://en.wikipedia.org/wiki/Poisson_process
This fixes#12620
Change-Id: If2400809ed3c41de504dd6cff06be14e476ff96c
Reviewed-on: https://go-review.googlesource.com/14590
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
ppc64 codegen assumes that it is OK to stomp on r31 at any time, but it is not
excluded from the set of registers that regopt is allowed to use.
Fixes#12597
Change-Id: I29c7655e32abd22f3c21d88427b73e4fca055233
Reviewed-on: https://go-review.googlesource.com/15245
Reviewed-by: Minux Ma <minux@golang.org>
Turns out the summary information for the ... args was
already correctly computed, all that lacked was to make
use of it and correct tests that documented our prior
deficiencies.
Fixes#12006
Change-Id: Ie8adfab7547f179391d470679598f0904aabf9f7
Reviewed-on: https://go-review.googlesource.com/15200
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
The runtime/zgoos_$GOOS.go and runtime/zgoarch_$GOARCH.go files
are in the repository now, so the message is actually incorrect
(running make.bash won't generate those). The reason is probably
wrong $GOROOT.
Change-Id: I8dc125594c52d666eca91fd5af48b60d12d599b8
Reviewed-on: https://go-review.googlesource.com/15221
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CGOPKGPATH variable was undocumented, but it is not needed anymore.
It was used before the existence of the go tool to tell cgo the full
path of the package that it was building, which in turn set the name
of the shared library that cgo expected to load back when cgo used
shared libraries. CGOPKGPATH no longer does anything useful;
it just affects the comments in the generated header file.
Remove it to avoid any future confusion.
Fixes#11852
Change-Id: Ieb452e5bbcfd05b87a4a3618b5b8f44423341858
Reviewed-on: https://go-review.googlesource.com/15266
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Commit acc90c5 passed the trybots, lingered for weeks, and in the
meantime the type of this variable changed to a bool. I didn't rebase
and re-run the trybots before submitting.
Fixes#12832
Change-Id: If24fda227edd8207f8069c67f1c45f08e6ac215a
Reviewed-on: https://go-review.googlesource.com/15286
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Internal error arose from calling methodfunc on a invalid interface
field during the implements check. int obviously isn't a function,
and errors on getinarg...
for im := iface.Type; im != nil; im = im.Down {
imtype = methodfunc(im.Type, nil)
// ...
}
Fix handles the internal compiler error, but does not throw an
additional error, i.e. the following code will error on the I
interface, but type A will pass the implements check since
'Read(string) string' is implemented and 'int' is skipped
type I interface {
Read(string) string
int
}
type A struct {
}
func (a *A) Read(s string) string {
return s
}
func New() I {
return new(A)
}
Fixes#10975
Change-Id: I4b54013afb2814db3f315515f0c742d8631ca500
Reviewed-on: https://go-review.googlesource.com/13747
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Currently, amd64p32's memmove and memclr use 8 byte writes as much as
possible and 1 byte writes for the tail of the object. However, if an
object ends with a 4 byte pointer at an 8 byte aligned offset, this
may copy/zero the pointer field one byte at a time, allowing the
garbage collector to observe a partially copied pointer.
Fix this by using 4 byte writes instead of 8 byte writes.
Updates #12552.
Change-Id: I13324fd05756fb25ae57e812e836f0a975b5595c
Reviewed-on: https://go-review.googlesource.com/15370
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This fixes an issue where the runtime panics with "out of memory" or
"cannot allocate memory" even though there's ample memory by reducing
the number of memory mappings created by the memory allocator.
Commit 7e1b61c worked around issue #8832 where Linux's transparent
huge page support could dramatically increase the RSS of a Go process
by setting the MADV_NOHUGEPAGE flag on any regions of pages released
to the OS with MADV_DONTNEED. This had the side effect of also
increasing the number of VMAs (memory mappings) in a Go address space
because a separate VMA is needed for every region of the virtual
address space with different flags. Unfortunately, by default, Linux
limits the number of VMAs in an address space to 65530, and a large
heap can quickly reach this limit when the runtime starts scavenging
memory.
This commit dramatically reduces the number of VMAs. It does this
primarily by only adjusting the huge page flag at huge page
granularity. With this change, on amd64, even a pessimal heap that
alternates between MADV_NOHUGEPAGE and MADV_HUGEPAGE must reach 128GB
to reach the VMA limit. Because of this rounding to huge page
granularity, this change is also careful to leave large used and
unused regions huge page-enabled.
This change reduces the maximum number of VMAs during the runtime
benchmarks with GODEBUG=scavenge=1 from 692 to 49.
Fixes#12233.
Change-Id: Ic397776d042f20d53783a1cacf122e2e2db00584
Reviewed-on: https://go-review.googlesource.com/15191
Reviewed-by: Keith Randall <khr@golang.org>
In general, finishsweep_m must block until any spans that are
concurrently being swept have been swept. It accomplishes this by
looping over all spans, which, as in the previous commit, takes
~1ms/heap GB. Unfortunately, we do this during the STW sweep
termination phase, so multi-gigabyte heaps can push our STW time past
10ms.
However, there's no need to do this wait if the world is stopped
because, in effect, stopping the world already had to wait for
anything that was sweeping (and if it didn't, the wait in
finishsweep_m would deadlock). Hence, we can simply skip this loop if
the world is stopped, such as during sweep termination. In fact,
currently all calls to finishsweep_m are STW, but this hasn't always
been the case and may not be the case in the future, so we keep the
logic around.
For 24GB heaps, this reduces max pause time by 75% relative to tip and
by 90% relative to Go 1.5. Notably, all pauses are now well under
10ms. Here are the results for the garbage benchmark:
------------- max pause ------------
Heap Procs after change before change 1.5.1
24GB 12 3.8ms 16ms 37ms
24GB 4 3.7ms 16ms 37ms
4GB 4 3.7ms 3ms 6.9ms
In the 4GB/4P case, it seems the "before change" run got lucky: the
max went up, but the 99%ile pause time went down from 3ms to 2.04ms.
Change-Id: Ica22189559f231d408ef2815019c9dbb5f38bf31
Reviewed-on: https://go-review.googlesource.com/15071
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In order to compute the sweep ratio, the runtime needs to know how
many pages belong to spans in state _MSpanInUse. Currently it finds
this out by looping over all spans during mark termination. However,
this takes ~1ms/heap GB, so multi-gigabyte heaps can quickly push our
STW time past 10ms.
Replace the loop with an actively maintained count of in-use pages.
For multi-gigabyte heaps, this reduces max mark termination pause time
by 75%–90% relative to tip and by 85%–95% relative to Go 1.5.1. This
shifts the longest pause time for large heaps to the sweep termination
phase, so it only slightly decreases max pause time, though it roughly
halves mean pause time. Here are the results for the garbage
benchmark:
---- max mark termination pause ----
Heap Procs after change before change 1.5.1
24GB 12 1.9ms 18ms 37ms
24GB 4 3.7ms 18ms 37ms
4GB 4 920µs 3.8ms 6.9ms
Fixes#11484.
Change-Id: Ia2d28bb8a1e4f1c3b8ebf79fb203f12b9bf114ac
Reviewed-on: https://go-review.googlesource.com/15070
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This reduces pause time by ~25% relative to tip and by ~50% relative
to Go 1.5.1.
Currently one of the steps of STW mark termination is to loop (in
parallel) over all spans to find objects with finalizers in order to
mark all objects reachable from these objects and to treat the
finalizer special as a root. Unfortunately, even if there are no
finalizers at all, this loop takes roughly 1 ms/heap GB/core, so
multi-gigabyte heaps can quickly push our STW time past 10ms.
Fix this by moving this scan from mark termination to concurrent scan,
where it can run in parallel with mutators. The loop itself could also
be optimized, but this cost is small compared to concurrent marking.
Making this scan concurrent introduces two complications:
1) The scan currently walks the specials list of each span without
locking it, which is safe only with the world stopped. We fix this by
speculatively checking if a span has any specials (the vast majority
won't) and then locking the specials list only if there are specials
to check.
2) An object can have a finalizer set after concurrent scan, in which
case it won't have been marked appropriately by concurrent scan. If
the finalizer is a closure and is only reachable from the special, it
could be swept before it is run. Likewise, if the object is not marked
yet when the finalizer is set and then becomes unreachable before it
is marked, other objects reachable only from it may be swept before
the finalizer function is run. We fix this issue by making
addfinalizer ensure the same marking invariants as markroot does.
For multi-gigabyte heaps, this reduces max pause time by 20%–30%
relative to tip (depending on GOMAXPROCS) and by ~50% relative to Go
1.5.1 (where this loop was neither concurrent nor parallel). Here are
the results for the garbage benchmark:
---------------- max pause ----------------
Heap Procs Concurrent scan STW parallel scan 1.5.1
24GB 12 18ms 23ms 37ms
24GB 4 18ms 25ms 37ms
4GB 4 3.8ms 4.9ms 6.9ms
In all cases, 95%ile pause time is similar to the max pause time. This
also improves mean STW time by 10%–30%.
Fixes#11485.
Change-Id: I9359d8c3d120a51d23d924b52bf853a1299b1dfd
Reviewed-on: https://go-review.googlesource.com/14982
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, the GC modes constants are untyped and functions pass them
around as ints. Clean this up by introducing a proper type for these
constant.
Change-Id: Ibc022447bdfa203644921fbb548312d7e2272e8d
Reviewed-on: https://go-review.googlesource.com/14981
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
