This will allow varying implementations and wrappers, and more
closely matches the concepts used in the net library.
Change-Id: I4be4c6efb3def0eda2693f482cbb0c6f776e5642
Reviewed-on: https://go-review.googlesource.com/c/tools/+/232877
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
When testing Highlight the highlight count is checked against expected
number of highlights. If it doesn't match t.Errorf(...) is called and
the test continues.
A few lines below the test ranges over results using the index for both
result and expected result leading to a panic if there are less then
expected highlights.
This change fails fast with t.Fatalf(...) instead to avoid the panic.
Change-Id: I33d0973f3145c307d9084d037ffbb73b244a3acb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/236099
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Previously, workdone reporting was managed by the goroutine(s) that
compute diagnostics following a file change. The intention was to signal
when diagnostics resulting from file changes were complete.
This was buggy, in two ways:
+ When no snapshots are determined to require diagnosis, no work is
reported.
+ If multiple snapshots required diagnosis, we'd get multiple work IDs.
Fix this by lifting up the 'work' to the level of didModifyFiles.
Change-Id: I73cf8bf9946dba777650bba9d4d18dad6954620e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/235738
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Exit now closes the connection rather than exiting the process.
This allows things to shutdown gracefully, and removes special
cases. It also allows the tests to call CloseEditor instead of
just Shutdown, which prevents goroutine leaks.
Change-Id: I26121ba5d393ef74ce0e912611c8b3817e3691ea
Reviewed-on: https://go-review.googlesource.com/c/tools/+/231798
Reviewed-by: Robert Findley <rfindley@google.com>
This allows us to rely on higher level functionality like timeouts and
close cancelling pending reads cleanly.
Change-Id: I3a43d21ed35d3da1eb818ea22f8d02201488a1d0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/230464
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Also the ability to wait for them to correctly close.
Change-Id: I198c9e24a21c04d5c05bae7a4a0f503429ab0346
Reviewed-on: https://go-review.googlesource.com/c/tools/+/231699
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jonathan Amsterdam <jba@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
This test partially reproduces some strange behavior with creating
new tests files. In particular, it creates a new x test in a package
that already has a test variant and adds content with a missing import.
In the test, the import is never added. However, in my own experience
debugging this in VS Code, I see the import get added but the diagnostic
never get removed. One thing at a time though...
Updates golang/go#39315
Change-Id: I724a145688b915d04abd1f21efc6f9a7506be043
Reviewed-on: https://go-review.googlesource.com/c/tools/+/235581
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
When a file with errors is removed outside the editor, sometimes its
errors are cleared by the editor and sometimes they are not. If the file
is still open in the editor gopls does not clear the errors, taking the
editor's version as the truth. Otherwise the errors are cleared.
(This behavior depends on the editor sending gopls a notification that
the workspace changed.)
There seems to be no good way yet to test that gopls takes no action after
receiving the didChangeWatchedFiles notification.
Updates golang/go#38878
Change-Id: Ie418dd786d4c5f827cf0665a31f0f9913f7cfdc0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/235377
Run-TryBot: Peter Weinberger <pjw@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Now that we're not using build tags any more we can consolidate files.
Do so.
I tried a little to find good places for the moved code, but only a
little.
Change-Id: I6b66afb7cad870471d7d4a3d86c13fadb94a40e1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/235457
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Many tool features, particularly modules-related, require particular Go
versions. Build tags are unwieldy, requiring one-off test files which
break up test organization.
Add a suite of testenv functions that check what Go version is in use.
Note that this is the logical Go version, as denoted by the release
tags; it should be updated at the beginning of the release cycle per
issue golang/go#38704.
For ease of reviewing, I'll merge/delete files in a followup CL.
Change-Id: Id85ce0f83387b3c45d68465161cf88447325d4f2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/234882
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Cached packages are probably more relevant than uncached packages, but
we still need to go in relevance order, since we'll stop adding results
after we hit the cap.
Fixesgolang/go#38461. (Hopefully.)
Change-Id: I555dd5f7568baa8d69760ed5836341a474e94346
Reviewed-on: https://go-review.googlesource.com/c/tools/+/231619
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
I made a silly mistake and checked the prefix on the import path rather
than the package name, which obviously breaks everything other than
top-level stdlib packages.
Fix that, then tweak the ranking a bit. We now get deep completions, which
is nice, but filled up the results too fast. Now instead of 5 results of
any kind, we give up after 5 packages searched.
Change-Id: I15b293f68f17531077da9ffe791a38ccc0e129f4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/231617
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Also switched the internals of the stream implementations to using
net.Conn to enable asynchronous closing, not yet exposed int the API.
Change-Id: I57f1c36e7a46729d24f4339ba2fecc3f868e823f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/231698
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jonathan Amsterdam <jba@google.com>
One line legal code like `package x; import "os"; func f() {}` was
being misformatted. In these cases the parse flag ImportsOnly loses
important parts of the code, while full parsing works. Presumably
all these cases are short enough that there is no appreciable penalty
from the extra parsing.
Fixes https://github.com/golang/go/issues/36824
Change-Id: I9a4581d67c590578f8fdea5ed2a2a58e0bc3c40b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/234900
Run-TryBot: Peter Weinberger <pjw@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Switching to using a t.Skip means we are more likely to remember to
actually re-enable the test at some point.
Also picked up a staticcheck fix along the way.
Change-Id: I382eaa8d204bee74a7ff46e8a1b11dab567b83ae
Reviewed-on: https://go-review.googlesource.com/c/tools/+/234757
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Peter Weinberger <pjw@google.com>
Assigning a slice to the appendage of itself is common and tedious
enough to warrant a special case completion candidate. We now offer
smarter "append()" candidates:
var foo []int
foo = app<> // offer "append(foo, <>)"
fo<> // offer "foo = append(foo, <>)"
The latter is only offered if the best completion candidate is a
slice. It is inserted as the second-best candidate because it seems
impossible to avoid annoying false positives if it is ranked first.
I added a new debug option to disable literal completions. This was to
clean up some test logic that was disabling snippets for all tests
just to defeat literal completions. My tests were failing mysteriously
due to having snippets disabled, and it was hard to figure out why.
Change-Id: I3e8313e00a1409840cb99d5d71c593435a7aeb71
Reviewed-on: https://go-review.googlesource.com/c/tools/+/221777
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change introduces Module and ModuleError struct types to the
packages package with the same types as defined in the cmd/go
documentation for module information output by go list (with the
exception of the Module type's Versions and Update fields).
go/packages will fill the module struct with the module information
output by go list. Drivers that support modules can also provide
module information by filling the Module fields in the packages in
their driverResponses.
Fixesgolang/go#35921
Change-Id: Icbdf79869f09d26f6a01c3670146ace4f6ffa25e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/234219
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
fake.Editor.Server was exported, but CL 233117 was rebased on top while
still using the unexported field.
Update the rebased code.
Change-Id: Ie8f1f2c3948a1122b9e30a843cc33c79ef623ea4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/234494
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Peter Weinberger <pjw@google.com>
The code was introducting syntax errors for some edge cases (example in
regtest/import_test.go), and I found it hard to follow.
The new code passes all the tests. There are new regtests to guarantee
no CodeActions are returned for some cases that vim testing noticed.
Change-Id: Ia09da667f74673c11bfe185e4f76a76c66940105
Reviewed-on: https://go-review.googlesource.com/c/tools/+/233117
Run-TryBot: Peter Weinberger <pjw@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
The priorities for which comment to show should be 1) documentation
directly above the var/const, 2) documentation for the var/const block,
3) line comments.
See https://github.com/microsoft/vscode-go/issues/3240.
Change-Id: Ie136f0f25ac8208147070682bb1f3a663d6da25f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/234101
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Something is making this test deterministically fail in some
environments, such as @bcmills' desktop.
Skip it while I build go at tip and debug.
Updates golang/go#39135
Change-Id: I1bf8c55c5cfca471a904de85936f504313094807
Reviewed-on: https://go-review.googlesource.com/c/tools/+/234480
Run-TryBot: Robert Findley <rfindley@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Many tools test check for the ability to compile cgo programs.
Consolidate them all into testenv.NeedsTool("cgo").
Change-Id: I62c96e7b4dc72df34b8fdbf10326c7d19e0613e8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/234108
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Now that we support authoring cgo packages better, we need a way to
regenerate the C definitions. Doing it automatically is very difficult;
in particular, referencing a new symbol from the C package may require
regeneration, but we don't want to do that for every typo.
For now, give the user a button and make them push it. We attach a
code lens to the import "C" line. This is vulnerable to the usual
user-didn't-save glitches.
Updates golang/go#35721.
Change-Id: Iaa3540a9a12bbd8705e7f0e43ad0be1b22e87067
Reviewed-on: https://go-review.googlesource.com/c/tools/+/234103
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
The format of descriptions for the `-remote.*` flags were inconsistent.
Clean them up.
Also remove a TODO in lsprpc.go about adding a test for telemetry. That
is enough of a separate concern (and one that is rapidly changing) that
I no longer think this TODO makes sense.
Change-Id: Id14796000634ae4be4b480d0386b1da9069737c4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/234113
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Currently, our hover text by default links point to public documentation
sites (e.g. pkg.go.dev). This doesn't make sense for private repos, so
hide the hovertext link when the import path matches GOPRIVATE.
Implementing this was a little messy. To be optimal I had to thread
the value of goprivate through cache.view, and to be correct I had to
duplicate some code from cmd/go internal.
Regtest will follow after https://golang.org/cl/232983 is submitted.
Updates golang/go#36998
Change-Id: I1e556471bf919fea30132d9642426a08fdb7f434
Reviewed-on: https://go-review.googlesource.com/c/tools/+/233524
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
In CL 229779 I enabled Cgo type checking for go/packages, but we don't
actually type check there. We need to enable it in our own type checking
too.
No test updates because the negative effects are relatively subtle and
caught by an upcoming regtest.
Change-Id: I31691d69eb104cdabfd4fbe0a14b1f3c9741eabb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/234102
Run-TryBot: Heschi Kreinick <heschi@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When on 1.15+, enable TypecheckCgo. This improves cgo support
significantly, but we'll still have trouble with newly-referenced C
identifiers and changes to the magic comment.
Updates golang/go#35721.
Change-Id: I44dc95ce2d91d552e1e66e3722dc4230ab59fedd
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229779
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TestBadGOPATH tests for a empty element in the GOPATH list using
"GOPATH=:/path/to/gopath", assuming that ':' is the path list
separator. On Windows the test fails, because Windows path list
separator is ';'. Therefore this test isn't built for Windows.
On Plan 9, os.PathListSeparator is '\000', so the test fails
there too, and should not be built for Plan 9.
Change-Id: Icdc2f8de098c1415103ec6124906ad6c578ad183
Reviewed-on: https://go-review.googlesource.com/c/tools/+/233718
Reviewed-by: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It's in the build tagged tests because the fix is only in 1.14.
Fixesgolang/go#36960
Change-Id: I606dfb4f73735c6db8c48f67f19720d340be8361
Reviewed-on: https://go-review.googlesource.com/c/tools/+/232991
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
When run in CLI, "DocumentSymbol()" returns "[]protocol.DocumentSymbol"
or "[]protocol.SymbolInformation", so need to handle that as well.
Change-Id: I7885d3c53899103553df57f7f0ceceb2a33ec021
Reviewed-on: https://go-review.googlesource.com/c/tools/+/232557
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In a later CL we include the fully qualified path to a symbol in the
Name field of SymbolInformation. This means that we end up with
matches like:
golang.org/x/tools/internal/lsp/workspacesymbol/b.WorkspaceSymbolVariableB
A fuzzy match against this name using the query "wsym" would match the
"workspacesymbol" of the import path as well as the
"WorkspaceSymbolVariableB" that is the symbol name itself.
Therefore we rename the symbols in the:
internal/lsp/testdata/lsp/primarymod/workspacesymbol/...
from WorkspaceSymbol* to RandomGopher*, which allows our fuzzy matches
to be more precise.
Change-Id: Idbeb663f5750cae4835b0fdaa77531e30353fb89
Reviewed-on: https://go-review.googlesource.com/c/tools/+/228759
Run-TryBot: Paul Jolly <paul@myitcv.org.uk>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
In preparation for later changes to the implementation of the workspace
Symbol method, we add the Symbol method to fake.Editor. This requires
the definition of a number of associated fake types (editor-friendly,
byte-offset-based versions of protocol UTF16-based types) for example
fake.SymbolInformation and the types it references.
We also implement a basic regtest for the Symbol method, exposing Symbol
on regtest.Env like other LSP server methods. To aid with the writing of
Symbol result assertions, we provide some helper functions to simplify
the process of defining matches that are evaluated against the result
set.
Change-Id: If73b493e1e791c8201423a303af8041f5a15ccfc
Reviewed-on: https://go-review.googlesource.com/c/tools/+/228121
Run-TryBot: Paul Jolly <paul@myitcv.org.uk>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
In preparation for later changes to the workspace Symbol method, we add
a separate configuration option keyed by "symbolMatcher" that specifies
the type of matcher to use for workspace symbol requests. We also define
a new type SymbolMatcher, the type of this new option. We require
SymbolMatcher to be a separate type from Matcher because a later CL adds
a type of symbol matcher that does not make sense in the context of
other uses of Matcher, e.g. completion.
Change-Id: Icde7d270b9efb64444f35675a8d0b48ad3b8b3dd
Reviewed-on: https://go-review.googlesource.com/c/tools/+/228122
Reviewed-by: Robert Findley <rfindley@google.com>
WorkspaceSymbols matches symbols across views using the given query,
according to the matcher Matcher.
The workspace symbol method is defined in the spec as follows:
> The workspace symbol request is sent from the client to the server to
> list project-wide symbols matching the query string.
It is unclear what "project-wide" means here, but given the parameters
of workspace/symbol do not include any workspace identifier, then it has
to be assumed that "project-wide" means "across all workspaces". Hence
why WorkspaceSymbols receives the views []View.
However, it then becomes unclear what it would mean to call
WorkspaceSymbols with a different configured Matcher per View.
Therefore we assume that Session level configuration will define the
Matcher to be used for the WorkspaceSymbols method.
As part of this change we also tidy up lsp_test.go and source_test.go to
remove some repetition.
Change-Id: I444f9a78303ac9d2c8d8ac6496603b5758e4aafd
Reviewed-on: https://go-review.googlesource.com/c/tools/+/228763
Run-TryBot: Paul Jolly <paul@myitcv.org.uk>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
I've been using the inspect command to find data about the daemon and
its various sessions while debugging gopls. In practice, however, I
don't simply want to view the debug information: I want to script it.
This change removes the custom output formatting in favor of indented
JSON, so that we can do things like the following:
tail -f $(gopls inspect sessions | gq -r .logfile)
Which tails the daemon logs for the current gopls binary version.
Change-Id: I8895644b1493862f027e6c4b06e32612a4f3927d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/233357
Run-TryBot: Robert Findley <rfindley@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This extracts the printing code from the log writer so it can be re-used
and then changes the loggers in the lsp to use it.
This means that messages that used to look like
date:
message=text
now print as
date: text
which makes the logs a lot easier to read.
Change-Id: I9dfbae47cdc9aeb7d3ca3279e445f39f2e590827
Reviewed-on: https://go-review.googlesource.com/c/tools/+/232989
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
As a follow-up to CL 232990, return in the default case so that the
compiler will complain if we fail to return.
Change-Id: Ib771dfcd1a67b33fd51508ac183b861c00417efb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/232992
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
A missing return in the SelectorExpr case meant that cloneExpr would
return the original node, resulting in AST corruption when the caller
modified it.
It might be nice to panic in the default case to prevent this from
happening again, but for now let's just fix it.
Fixesgolang/go#38927.
Change-Id: Ib99f2dadecf52007ac9319c480fbd2d636a0474a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/232990
Run-TryBot: Heschi Kreinick <heschi@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In VS Code, a workspace symbol query with an empty query parameter
is issued as soon as users open the symbol search box. There are many
symbols in a reasonably sized project and the chance that a user finds
a result in the randomly chosen 100 items out of those many symbols is
low. Thus, this first query is often useless.
Ignore this query and return an empty result immediately.
Change-Id: Idc7703c8e460c9115ecbcf198907acc9c82add4d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/232986
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TestVerifyUnified in internal/lsp/diff/difftest requires specific
behaviour of the 'diff' command which is known to be satisfied by
GNU diff. The plan9 'diff' command has no '-u' option, and the
illumos 'diff -u' produces output in a different format. Checking
specifically for the GNU version in the HasTool function ensures
the expected behaviour, and otherwise causes the test to be skipped.
Updates golang/go#38772
Change-Id: I5493fa8cfc48a112dc0b7356618c62d3ccb0366f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/232479
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
While writing the fake editor, I added some state tracking without using
it (log messages, events etc). We have since duplicated this logic in
the regtest package using client hooks.
Fix two messy aspects of this:
- remove the state tracking in the editor
- pass in the client hooks when connecting, so that they may be used
without locking, and so that we do not miss any hooks that may fire
during session initialization.
Change-Id: I24c17a28e9cfa4fca32b7ddd17c7bf01cbb12e0f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/232744
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
A couple string options were not using the asString helper. Update them,
and also add a setString helper to be consistent with setBool.
Change-Id: I38caef5b1595a3535b759e5bf1c8d350a8bf061e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/232741
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Some code lenses may be undesirable for certain users or editors -- for
example a code lens that runs tests, when VSCode already supports this
functionality outside of the LSP. To handle such situations, support
configuring code lenses via a new 'codelens' gopls option.
Add support for code lens in regtests, and use this to test the new
configuration. To achieve this, thread through a new 'EditorConfig' type
that configures the fake editor's LSP session. It made sense to move the
test Env overlay onto this config object as well.
While looking at them, document some types in source.Options.
Change-Id: I961077422a273829c5cbd83c3b87fae29f77eeda
Reviewed-on: https://go-review.googlesource.com/c/tools/+/232680
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
In (*snapshot).addPackage, we return early if the package handle is
already cached, but we continue building the dependency graph with a
handle passed into addPackage.
This seems fine since both handles should have the same cache key,
but if we clone the snapshot, we will end up dropping the handle that
had the type information on it. It will then have to be recomputed,
causing the skew in the types.Package.
Fixesgolang/go#38403
Change-Id: I0e360447a428123fcac444fbea3c2a3232ef941a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/232817
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
It is useful to know whether the session has any unsaved files, for
example to warn/error when executing a command that interacts only with
files on disk.
Add a new UnsavedFiles method to the Session.
Change-Id: Iea4bf472e3ed6897979306b670eb974a2ee0d3bb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/232747
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
LSP https://microsoft.github.io/language-server-protocol/specifications/specification-current/#cancelRequest
expects the server to send back the response even when the request is cancelled.
Gopls LSP protocol implements the cancellation using the context cancellation.
That is, upon a cancellation request from the client, the server calls the
corresponding canceller that cancels the context passed to the handler.
Reusing this cancelled context for the replyer is not safe because code in any layer
can decide to shortcircuit and skip sending the data back to the client.
E.g. https://cs.opensource.google/go/tools/+/master:internal/jsonrpc2/stream.go;l=63
This CL make sure to pass the detached context to the replier.
Alternative, or a better approach to avoid any unexpected side-effect of
using a detached context is to send out the response at the point of cancellation
with a separate context. But that requires more significant code change.
Testing is currently hard, but maybe doable once the current refactoring is
done. Test is left as a TODO.
Change-Id: I4611af00ad913e96b62c6b7180c6673b0465daf9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/232300
Reviewed-by: Ian Cottrell <iancottrell@google.com>
LoadMode and ParseMode are currently hashed with a string(int)
conversion, but this conversion is now discouraged (see the vet check
'stringintconv' for more information). Since the hash uses the code
point, this change replaces these instances with string(rune(int)).
Updates golang/go#32479.
Change-Id: I0d8e91d073fc34ac9faafe75a0d86cf71a5327d4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/232679
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Our fake.Workdir generates synthetic file events for "watched" files
when using its file API, but we have no such hooks for file changes
originating from an external process, in this case the go command.
Previously, we detected a file event by checking go command logs to see
if a go.mod file was created. This is bound to be fragile, so we replace
this with a helper function that walks the working directory looking for
changes.
Change-Id: I2c2176099b97f3a3b25f4aed2b18de13ae05544a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/232637
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We were previously sending diagnostics for nonexistent files, and then
adding them to the snapshot in the process. Remove this behavior, and
add a regression test. Case insensitive filesystems were too confusing
to write a test for, but fortunately, Filippo reported another instance
of this bug, so I used that for the regression test.
Fixesgolang/go#38602
Change-Id: I4ef6b51944f3338e838875a5aafffd066e8392f4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/230315
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
The Workspace type has accumulated too much additional functionality of
late: managing the Env, GOPATH, and GOPROXY in addition to the working
directory. Additionally, the name 'Workspace' can easily be confused
with 'workspaceFolder' in the LSP spec, and they're not quite
equivalent.
Split off a Proxy type to be responsible for the fake module proxy, and
a Workdir type to be responsible for working with the temporary
directory. Rename what remains of 'Workspace' to a more appropriate name
for such a collection of resources: Sandbox.
This is mostly just moving things around, with one significant change in
functionality: previously our three temporary directories (workdir,
gopath, and goproxy) were in separate toplevel directories below
$TMPDIR. Now they are all below a new sandbox temp directory, so that
they are correlated in the filesystem and can be cleaned up with one
call to os.RemoveAll.
Change-Id: I1e160a31ae22f0132355117df941fe65822900eb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/230758
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This test is failing on darwin-amd64-10_12: skip it while I investigate.
Change-Id: I506f54355924e86cf4235b04fd8890f59b48ac33
Reviewed-on: https://go-review.googlesource.com/c/tools/+/232198
Run-TryBot: Robert Findley <rfindley@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
I noticed that in a couple places, event.Error was called with a
message containing formatting verb. This was my likely done out of
habit, but is an incorrect use of the API: err is not formatted in the
message but is rather applied as an event label.
Remove the unused formatting verbs.
Change-Id: I52f914da81e338013c7449066e5d9ffa40a0a4c1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/232137
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Our editor interaction for running `go generate` was untested. Add
support for triggering generate from the fake editor, and a simple test.
To enable this, some helpers were added to list Workspace files and
check for file state changes, to avoid having to synthetically create
file events. This workaround is not ideal as it results in a leaky
abstraction: in other cases the regtest may assume that FileEvents are
triggered by workspace interactions (e.g. ws.WriteFile), but in this
case it cannot. Unfortunately the only real solution for this would be
to make file watching more realistic, by polling file state on an
interval or using an actual file watching library. Neither of those
options seemed worthwhile just to keep the fake.Editor API pristine.
A new debugging option is added, SkipCleanup, to allow inspecting
regtest working directories after a test with minimal code change.
Change-Id: I64dceeb21a4eb9eff2b6936e44f80f4bd24b82da
Reviewed-on: https://go-review.googlesource.com/c/tools/+/230313
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This fixes a bunch of fmt.Errorf calls to use %w rather than %v when wrapping
an error with additional context.
Change-Id: I03088376fbf89aa537555e825e5d02544d813ed2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/231477
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This should provide simple name completions for comments
above exported vars, constants, functions, and types.
Can be activated with `ctrl+space` within a comment.
Also fixes a panic introduced in the previous commit when completing comments that occur at the end of a file.
Fixes#34010Fixes#38793
Demo: https://i.imgur.com/qN82CVA.mp4
Change-Id: If9aaec7ce03a3e085361144bce5c7a66535127d1
GitHub-Last-Rev: b9ac874c7ff3c9a164ba698d0d561141a59e2435
GitHub-Pull-Request: golang/tools#224
Reviewed-on: https://go-review.googlesource.com/c/tools/+/230215
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
If the user's workspace is neither in GOPATH nor a module, and there
are errors in their code, send a message (with ShowMessage) only on
the first load, or when the configuration changes. The previous
behavior sent the message more frequently.
There is a regtest, and two new Expectations for when the fake
editor sees (or does not see) a ShowMessage notification.
Fixesgolang/go#37279
Change-Id: I076bd95105359b9310dcf97019e3559159271356
Reviewed-on: https://go-review.googlesource.com/c/tools/+/230897
Run-TryBot: Peter Weinberger <pjw@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This reverts commit 17a19b5fe7. The revert
is partial because that change also added the -short flag when running
govim tests, which we preserve as without this the tests often time-out
(and I don't want to increase our test timeout right now).
Reason for revert: telemetry races have been fixed in https://golang.org/cl/226317
Change-Id: I5fcf034c1fe6e2db48994e2f06b73a593c779e54
Reviewed-on: https://go-review.googlesource.com/c/tools/+/231637
Run-TryBot: Robert Findley <rfindley@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Issue https://github.com/golang/go/issues/36824 complained about
legal go code (e.g., 'package a; func f() {}') that was mishandled
(by being rewritten just as 'package a'). This bug seems to have been
partially fixed, as certified by the new regtests. The comment on
OneLineImports36824 says that the bug would be fixed if gopls
formatted the file before fixing the imports, but it doesn't.
Change-Id: If27fa738e54d9434d5b2f17ed4e52d555cb7c499
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229303
Run-TryBot: Peter Weinberger <pjw@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
As suggested on Slack, a better fix for golang/go#38467 would be to hide
suggested fixes on generated files. This way, the diagnostics are still
visible but files are not unintentionally modified.
Also, deleted the SuggestedFixes field on source.Diagnostic, since it's
entirely unused.
Change-Id: I10756471e0f913465b1cccd7f222eea0f4de77fe
Reviewed-on: https://go-review.googlesource.com/c/tools/+/230999
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Untyped members from unimported packages are scored the same as typed
members from unimported packages. We depended on the unimported
package relevance to rank the probably-more-relevant typed members
higher. However, there are some unrelated score penalties that can
only be applied to typed candidates, so the untyped candidates ended
up being ranked higher. Fix by increasing the relevance coefficient so
the relevance score overpowers other less important scoring
adjustments.
Fixesgolang/go#38104.
Change-Id: Ie43f769a41511f9cc3747ce6936130be7a29cd31
Reviewed-on: https://go-review.googlesource.com/c/tools/+/231238
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This means the lock is no longer held when writing to the underlying
stream.
Change-Id: I4f066ff593e35d771aa989c762712e4dd83a3f81
Reviewed-on: https://go-review.googlesource.com/c/tools/+/231040
Reviewed-by: Robert Findley <rfindley@google.com>
This is purely moving code: the getRemoteSocket, getTestServer, and
AddCloser funcs were above the more important RunOptions and runner.Run.
Move them closer to their usage.
Change-Id: I6d5b5577ca8ba5cbd5226b195541696967433dec
Reviewed-on: https://go-review.googlesource.com/c/tools/+/230998
Reviewed-by: Heschi Kreinick <heschi@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Add issue comments to tests for issues, move a couple constants closer
to their use.
Change-Id: I34fa2643195ae81e463a070952a1a1a4af2c6132
Reviewed-on: https://go-review.googlesource.com/c/tools/+/230997
Reviewed-by: Robert Findley <rfindley@google.com>
We had previously not been generating documentation on hover for
package declarations or import specs. We do this by adding a few special
cases, since package declarations don't appear in type information.
Throughout, we make the assumption that only one file in a package will
have the documentation for the package. go/doc just appends
documentation as it sees it. We may be able to do better by checking for
a "Package ..." but that still is not guaranteed. Not sure what the
right approach is, so this assumption may be the best option.
Fixesgolang/go#38526
Change-Id: Ibc515f8729e1aba0d11090be62371be6b18d0cfa
Reviewed-on: https://go-review.googlesource.com/c/tools/+/230417
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Don't show non-vet analyses when they appear in generated files. Vet
analyzers will give useful reports even in generated files.
Fixesgolang/go#38467
Change-Id: I0e628760b386553932de4cf1f5ba39784a205b53
Reviewed-on: https://go-review.googlesource.com/c/tools/+/230597
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
A common problem when writing regtests is that if you have an error in
your expectations, you must wait until the regtest times out to see what
went wrong.
With the integration of additional progress reporting in the LSP server,
we know when diagnostic work should have been completed, and we should
be able to fail tests early once we know that our diagnostic
expectations will never be met.
This CL adds a new OnceMet Expectation, which combines two expecations:
the first is a precondition that must be met before checking the second.
The second is an arbitrary expectation, but is translated as follows:
once the precondition is met, the second condition is checked and any
Unmet verdicts are translated into Unmeetable.
Change-Id: Ie8c677229a347c624e2659a3ef9104304b175243
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229977
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Update the regtest docstring to further explain how the package works,
and give a sense for why it exists.
Fixesgolang/go#36879
Change-Id: I4df4a286dc835ae56386b6d92128f7ea6c77ffb0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229782
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Minor cleanup for the regtest package:
- EnvMode is renamed to Mode, because it's really a server mode and not
directly related to the Env type.
- Modes are better documented.
Change-Id: Ia3aedfc70b665ea75a66731a72e4e87ae79db298
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229781
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The file length of env.go is getting hard to manage, so factor out the
test Runner to a new file.
Also move Runner.Close to the bottom of the file to have a more logical
progression.
Change-Id: Ifebea3277d826e9456aa02507a8349746386eb03
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229780
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
In order for regtests to wait until file diagnostics are complete,
instrument diagnostics with verbose WorkDone reporting. In order for
this to be granular enough for use, the modification source needed to be
threaded through to the didModifyFiles function (which is where the
diagnostic goroutine is spun off).
A new expectation is added: CompletedWork, to allow specifying that a
specific work item has been completed. The problem with using
NoOutstandingWork was that it required a continuous chain of work to
prevent the regtest from succeeding when the bug was present, meaning
that by the time we have sent the didChange notification successfully
the server must have started work on its behalf. This was inherently
racy, and too tricky to get right.
Additionally, a couple bugs are fixed:
- EmptyDiagnostics is corrected to account for the case where we have
received zero diagnostics for a given file.
- A deadlock is fixed in Await when expectations are immediately met.
Updates golang/go#36879Fixesgolang/go#32149
Change-Id: I49ee011860351eed96a3b4f6795804b57a10dc60
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229777
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Our current usage of WorkDone progress reporting (new in v3.15 of the
LSP spec) is in reporting progress on `go generate` commands. In
preparation for using this API more widely, factor out the reporting API
from the current io.WriteCloser wrapper (workDoneWriter).
Change-Id: Ib528093d81d4fc065528df90e100859e850b10df
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229459
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We were using strings.Split on env vars, which did bad stuff when the
var contained an =, e.g. GOFLAGS=-tags=foo. Only split on the first =.
Irritatingly, this breaks only `go mod` commands, so almost nothing in
gopls failed, just organize imports and the `go.mod` code lens stuff.
Fixesgolang/go#38669
Change-Id: I8d28c806b77a8df92100af1fa4fbcca5edf97cff
Reviewed-on: https://go-review.googlesource.com/c/tools/+/230560
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This moves the common code from the cmd and gopls tests to the shared cmdtest package, they were starting to drift apart.
This change was extracted from another larger cl where I was trying to work out why it broke in one but not the other.
Change-Id: I554ce364f4152e6b61f989da8162d968426d4ae5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/230301
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change was unfortunately lost while rebasing, resulting in a lot of
unremoved directories.
Change-Id: Icc1b667e31ac85e617b1c3a8d7c58f78e999d151
Reviewed-on: https://go-review.googlesource.com/c/tools/+/230314
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
There were a few cases where we were not properly qualifying package
names, particularly if the original package had a named import. Now,
we map between these names correctly - handling the case of multiple
packages that need to be qualified. This requires applying edits to
*ast.SelectorExprs, as well as *ast.Idents.
We still do not fully qualify unimported packages, and likely won't,
unless that's an issue for many users.
Updates golang/go#38591
Change-Id: I966a4d1f936f37ede89362d03da3ff98d8952a06
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229979
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
The definition command-line interface doesn't match the rest of the
commands, because I think we originally wanted to make them all
subcommands of "gopls query". Remove this, since it's no longer in use.
Change-Id: Iee923db6328774f787d539931001e438d1a2ae6e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/230299
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Instead of tagging events with their type, instead we infer the type from
the label pattern.
The standard event creators all have a matching test that returns true
if the the labels pattern matches the ones that would be built by the
creator.
Spans and logs already have a unique label pattern, other event types
required a special label marker.
This makes the system much more extensible, and also cleans up some
the API.
Change-Id: I1fbc9ec07aa84ead6c12bbd5ca65b13b605bfa4a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229242
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Formatting keys in labels can panic when a label is constructed with a nil
error. Avoid that by not passing the defective label to event.Log.
Change-Id: I3099a7ac48c5830af1072141f2b619d0e0fbcf5a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229985
Run-TryBot: Peter Weinberger <pjw@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
In cases like:
var v interface{}
fmt.Println(<>)
Completing to "v" would insert "v..." instead of "v". This was due to
a mixup where we were checking if the variadic type "[]interface{}"
was assignable to the candidate type "interface{}" instead of the
other way around.
Fixesgolang/go#38652.
Change-Id: I27c0b50bbf4b895924c8ed2c0c9dd6785e98cbe1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229921
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
In order to experiment with adding more progress reporting to gopls, add
a new experimental configuration for verbose work done reporting.
Also, pass configuration in InitializationOptions when initializing the
editor.
Change-Id: Id2336790719d9c0b6d663997e1aef672aec43d28
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229458
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change improves our approach to handling type aliases. Previously,
we were not fully qualifying the names in the AST, making the code
inserted in completions incorrect at times. Now, we clone the relevant
AST expr and qualify it. We also add handling for the return values of a
function, instead of just the parameters.
Fixesgolang/go#38230Fixesgolang/go#37283
Change-Id: Ib79f4636891c9b610ae848e9fa4dbae7c63db509
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229319
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
In preparation for later changes, add support for tracking outstanding
work in the lsp regtests. This simply threads through progress
notifications and tracks their state in regtest.Env.state. A new
Expectation is added to assert that there is no outstanding work, but
this is as-yet unused.
A unit test is added for Env to check that we're handling work progress
reports correctly after Marshaling/Unmarshaling, since we're not yet
exercising this code path in actual regtests.
Change-Id: I104caf25cfd49340f13d086314f5aef2b8f3bd3b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229320
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This was the last piece of Event that was public, and it was only public to
allow mutation in tests.
Adding CloneEvent allows tests to create an updated copy rather than
update the event in place.
Change-Id: I2215d1eb0317063948ef0fac955fa768a209564d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229241
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Now key types can be implemented outside the package that holds labels or events, they should be.
This prevents the large list of types from poluting the public interface of the core packages.
Change-Id: I927f31cb5e4e1d0c29619681015962f890623e5c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229240
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
Also moves core.Key to label.Key, but leaves the implementations
behind for now.
After using for a while, the word Tag conveys slightly the wrong
concept, tagging implies the entire set of information, label maps
better to a single named piece of information.
A label is just a named key/value pair, it is not really tied to the
event package, separating it makes it much easier to understand the
public symbols of the event and core packages, and allows us to also
move the key implementations somewhere else, which otherwise dominate
the API.
Change-Id: I46275d531cec91e28af6ab1e74a2713505d52533
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229239
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
event.Log removed
event.Print -> event.Log
event.Record -> event.Metric
event.StartSpan -> event.Start
In order to support this core now exposes the MakeEvent and Export functions.
Change-Id: Ic7550d88dbf400e32c419adbb61d1546c471841e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229238
Reviewed-by: Robert Findley <rfindley@google.com>
internal/telemetry/event was renamed to internal/event/core
Some things were partly moved from internal/telemetry/event straight to
internal/event to minimize churn in the following restructuring.
Change-Id: I8511241c68d2d05f64c52dbe04748086dd325158
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229237
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
