The Go runtime registers a handler for every signal. This prevents Go
binaries from working on QEMU in user-emulation mode, since the hacky
way QEMU implements signals on Linux assumes that no-one uses signal
64 (SIGRTMAX).
In the past, we had a workaround in the runtime to prevent crashes on
start-up when running on QEMU:
golang.org/cl/124900043
golang.org/cl/16853
but it went lost during the 1.11 dev cycle. More precisely, the test
for SIGRTMAX was dropped in CL 18150 when we stopped testing the
result of sigaction in the Linux implementation of setsig. That change
was made to avoid a stack split overflow because code started calling
setsig from nosplit functions. Then in CL 99077 we started testing the
result of sigaction again, this time using systemstack to avoid to
stack split overflow. When this test was added back, we did not bring
back the test of SIGRTMAX.
As a result, Go1.10 binaries work on QEMU, while 1.11 binaries
immediately crash on startup.
This change restores the QEMU workaround.
Updates #24656
Change-Id: I46380b1e1b4bf47db7bc7b3d313f00c4e4c11ea3
Reviewed-on: https://go-review.googlesource.com/111176
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 108095 goes to some length inorder to keep the stack usage of getHPETTimecounter code paths bellow a limit
being checked by the linker analysis. That limit is spurious, when running on the system or signal stack.
In a similar scenario, cgocallback_gofunc performs an indirect call through AX to hide the call from the linker analysis.
Here instead, mark getHPETTimecounter //go:systemstack and call it appropriately.
Change-Id: I80bec5e4974eee3c564d94f6e1142f322df88b2f
Reviewed-on: https://go-review.googlesource.com/111495
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is a follow-up of CL 93637. There, when we redirect sync/atomic
to runtime/internal/atomic, a few good implementations of ARM atomics
were lost. This CL brings most of them back, with some improvements.
- Change atomic Store to a plain store with memory barrier, as we
already changed atomic Load to plain load with memory barrier.
- Use native 64-bit atomics on ARMv7, jump to Go implementations
on older machines. But drop the kernel helper. In particular,
for Load64, just do loads, not using Cas on the address being
load from, so it works also for read-only memory (since we have
already fixed 32-bit Load).
Change-Id: I725cd65cf945ae5200db81a35be3f251c9f7af14
Reviewed-on: https://go-review.googlesource.com/111315
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This gets us around the kernel helpers on ARMv7.
It is slightly faster than using the kernel helper.
name old time/op new time/op delta
AtomicLoad-4 72.5ns ± 0% 69.5ns ± 0% -4.08% (p=0.000 n=9+9)
AtomicStore-4 57.6ns ± 1% 54.4ns ± 0% -5.58% (p=0.000 n=10+9)
[Geo mean] 64.6ns 61.5ns -4.83%
If performance is really critical, we can even do compiler intrinsics
on GOARM=7.
Fixes#23792.
Change-Id: I36497d880890b26bdf01e048b542bd5fd7b17d23
Reviewed-on: https://go-review.googlesource.com/94076
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
The implementation of atomics are inherently tricky. It would
be good to have them implemented in a single place, instead of
multiple copies.
Mostly a simple redirect.
On 386, some functions in sync/atomic have better implementations,
which are moved to runtime/internal/atomic.
On ARM, some functions in sync/atomic have better implementations.
They are dropped by this CL, but restored with an improved
version in a follow-up CL. On linux/arm, 64-bit CAS kernel helper
is dropped, as we're trying to move away from kernel helpers.
Fixes#23778.
Change-Id: Icb9e1039acc92adbb2a371c34baaf0b79551c3ea
Reviewed-on: https://go-review.googlesource.com/93637
Reviewed-by: Austin Clements <austin@google.com>
Every time I poke at #14921, the g.waitreason string
pointer writes show up.
They're not particularly important performance-wise,
but it'd be nice to clear the noise away.
And it does open up a few extra bytes in the g struct
for some future use.
This is a re-roll of CL 99078, which was rolled
back because of failures on s390x.
Those failures were apparently due to an old version of gdb.
Change-Id: Icc2c12f449b2934063fd61e272e06237625ed589
Reviewed-on: https://go-review.googlesource.com/111256
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Munday <mike.munday@ibm.com>
Changes include:
1. open compilation option -msan for arm64
2. modify doc to explain -msan is also supported on linux/arm64
3. wrap msan lib API in msan_arm64.s
4. use libc for sigaction syscalls when cgo is enabled
5. use libc for mmap syscalls when cgo is enabled
Change-Id: I26ebe61ff7ce1906125f54a0182a720f9d58ec11
Reviewed-on: https://go-review.googlesource.com/109255
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Go runtime currently only populates hwcap for ppc64 and arm64.
While the interpretation of hwcap is platform specific the hwcap
information is generally available on linux.
Changing the runtime variable name to cpu_hwcap for cpu.hwcap makes it
consistent with the general naming of runtime variables that are linked
to other packages.
Change-Id: I1e1f932a73ed624a219b9298faafbb6355e47ada
Reviewed-on: https://go-review.googlesource.com/94757
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
R11 is only used as a temporary by a very small set of instructions
(DIV, MOD, MULH and extended MVC/XC instructions). By marking these
instructions as clobbering R11 we can allocate R11 in the general
case.
Change-Id: I0d4ffe80e57c164d42a5ea5ef6308756a5b0f742
Reviewed-on: https://go-review.googlesource.com/110255
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This is the scanstack analog of CL 104737,
which made a similar change for copystack.
name old time/op new time/op delta
ScanStack-8 41.1ms ± 6% 38.9ms ± 5% -5.52% (p=0.000 n=50+48)
Change-Id: I7427151dea2895ed3934f8a0f61d96b568019217
Reviewed-on: https://go-review.googlesource.com/105536
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
There are many possible stack scanning benchmarks,
but this one is at least a start.
cpuprofiling shows about 75% of CPU in func scanstack.
Change-Id: I906b0493966f2165c1920636c4e057d16d6447e0
Reviewed-on: https://go-review.googlesource.com/105535
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Moving mmap, munmap, madvise, usleep.
Also introduce __error function to get at libc's errno variable.
Change-Id: Ic47ac1d9eb71c64ba2668ce304644dd7e5bdfb5a
Reviewed-on: https://go-review.googlesource.com/110437
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Make selectgo return recvOK as a result parameter instead.
Change-Id: Iffd436371d360bf666b76d4d7503e7c3037a9f1d
Reviewed-on: https://go-review.googlesource.com/37935
Reviewed-by: Austin Clements <austin@google.com>
Now the registration phase looks like:
var cases [4]runtime.scases
var order [8]uint16
selectsend(&cases[0], c1, &v1)
selectrecv(&cases[1], c2, &v2, nil)
selectrecv(&cases[2], c3, &v3, &ok)
selectdefault(&cases[3])
chosen := selectgo(&cases[0], &order[0], 4)
Primarily, this is just preparation for having the compiler open-code
selectsend, selectrecv, and selectdefault.
As a minor benefit, order can now be layed out separately on the stack
in the pointer-free segment, so it won't take up space in the
function's stack pointer maps.
Change-Id: I5552ba594201efd31fcb40084da20b42ea569a45
Reviewed-on: https://go-review.googlesource.com/37933
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Convert raise from raw syscalls to using the system pthread library.
As a bonus, raise will now target the current thread instead of the
process.
Updates #17490
Change-Id: I2e44f2000bf870e99a5b4dc5ff5e0799fba91bde
Reviewed-on: https://go-review.googlesource.com/110475
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Now we no longer need to mess with TLS on Darwin 386/amd64, we always
rely on the pthread library to set it up. We now just use one entry
in the TLS for the G.
Return from mstart to let the pthread library clean up the OS thread.
Change-Id: Iccf58049d545515d9b1d090b161f420e40ffd244
Reviewed-on: https://go-review.googlesource.com/110215
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 93658 moved stack trace printing inside a systemstack call to
sidestep complexity in case the runtime is in a inconsistent state.
Unfortunately, debuggers generating backtraces for a Go panic
will be confused and come up with a technical correct but useless
stack. This CL moves just the crash performing - typically a SIGABRT
signal - outside the systemstack call to improve backtraces.
Unfortunately, the crash function now needs to be marked nosplit and
that triggers the no split stackoverflow check. To work around that,
split fatalpanic in two: fatalthrow for runtime.throw and fatalpanic for
runtime.gopanic. Only Go panics really needs crashes on the right stack
and there is enough stack for gopanic.
Example program:
package main
import "runtime/debug"
func main() {
debug.SetTraceback("crash")
crash()
}
func crash() {
panic("panic!")
}
Before:
(lldb) bt
* thread #1, name = 'simple', stop reason = signal SIGABRT
* frame #0: 0x000000000044ffe4 simple`runtime.raise at <autogenerated>:1
frame #1: 0x0000000000438cfb simple`runtime.dieFromSignal(sig=<unavailable>) at signal_unix.go:424
frame #2: 0x0000000000438ec9 simple`runtime.crash at signal_unix.go:525
frame #3: 0x00000000004268f5 simple`runtime.dopanic_m(gp=<unavailable>, pc=<unavailable>, sp=<unavailable>) at panic.go:758
frame #4: 0x000000000044bead simple`runtime.fatalpanic.func1 at panic.go:657
frame #5: 0x000000000044d066 simple`runtime.systemstack at <autogenerated>:1
frame #6: 0x000000000042a980 simple at proc.go:1094
frame #7: 0x0000000000438ec9 simple`runtime.crash at signal_unix.go:525
frame #8: 0x00000000004268f5 simple`runtime.dopanic_m(gp=<unavailable>, pc=<unavailable>, sp=<unavailable>) at panic.go:758
frame #9: 0x000000000044bead simple`runtime.fatalpanic.func1 at panic.go:657
frame #10: 0x000000000044d066 simple`runtime.systemstack at <autogenerated>:1
frame #11: 0x000000000042a980 simple at proc.go:1094
frame #12: 0x00000000004268f5 simple`runtime.dopanic_m(gp=<unavailable>, pc=<unavailable>, sp=<unavailable>) at panic.go:758
frame #13: 0x000000000044bead simple`runtime.fatalpanic.func1 at panic.go:657
frame #14: 0x000000000044d066 simple`runtime.systemstack at <autogenerated>:1
frame #15: 0x000000000042a980 simple at proc.go:1094
frame #16: 0x000000000044bead simple`runtime.fatalpanic.func1 at panic.go:657
frame #17: 0x000000000044d066 simple`runtime.systemstack at <autogenerated>:1
After:
(lldb) bt
* thread #7, stop reason = signal SIGABRT
* frame #0: 0x0000000000450024 simple`runtime.raise at <autogenerated>:1
frame #1: 0x0000000000438d1b simple`runtime.dieFromSignal(sig=<unavailable>) at signal_unix.go:424
frame #2: 0x0000000000438ee9 simple`runtime.crash at signal_unix.go:525
frame #3: 0x00000000004264e3 simple`runtime.fatalpanic(msgs=<unavailable>) at panic.go:664
frame #4: 0x0000000000425f1b simple`runtime.gopanic(e=<unavailable>) at panic.go:537
frame #5: 0x0000000000470c62 simple`main.crash at simple.go:11
frame #6: 0x0000000000470c00 simple`main.main at simple.go:6
frame #7: 0x0000000000427be7 simple`runtime.main at proc.go:198
frame #8: 0x000000000044ef91 simple`runtime.goexit at <autogenerated>:1
Updates #22716
Change-Id: Ib5fa35c13662c1dac2f1eac8b59c4a5824b98d92
Reviewed-on: https://go-review.googlesource.com/110065
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
The general policy for the current state of js/wasm is that it only
has to support tests that are also supported by nacl.
The test nilptr3.go makes assumptions about which nil checks can be
removed. Since WebAssembly does not signal on reading a null pointer,
all nil checks have to be explicit.
Updates #18892
Change-Id: I06a687860b8d22ae26b1c391499c0f5183e4c485
Reviewed-on: https://go-review.googlesource.com/110096
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Missed conversion of newosproc for the parts of darwin that
weren't affected by my previous change.
Update #25181
Change-Id: I81a2935e192b6d0df358c59b7e785eb03c504c23
Reviewed-on: https://go-review.googlesource.com/110123
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Some of the comments relative paths do not exist and
reflect does not define its own hmap structure.
Correct paths and consistently reference paths starting from the
go src directory.
Change-Id: I5204a3a98f77d65f17dcde98b847378cea05ad8a
Reviewed-on: https://go-review.googlesource.com/94758
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Replace thread creation with calls to the pthread
library in libc.
Update #17490
Change-Id: I1e19965c45255deb849b059231252fc6a7861d6c
Reviewed-on: https://go-review.googlesource.com/108679
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
There are several things combined in this change.
First, eliminate the gobitvector type in favor
of adding a ptrbit method to bitvector.
In non-performance-critical code, use that method.
In performance critical code, though, load the bitvector data
one byte at a time and iterate only over set bits.
To support that, add and use sys.Ctz8.
name old time/op new time/op delta
StackCopyPtr-8 81.8ms ± 5% 78.9ms ± 3% -3.58% (p=0.000 n=97+96)
StackCopy-8 65.9ms ± 3% 62.8ms ± 3% -4.67% (p=0.000 n=96+92)
StackCopyNoCache-8 105ms ± 3% 102ms ± 3% -3.38% (p=0.000 n=96+95)
Change-Id: I00b80f45612708bd440b1a411a57fa6dfa24aa74
Reviewed-on: https://go-review.googlesource.com/109716
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
getArgInfo is called a lot during stack copying.
In the common case it doesn't do much work,
but it cannot be inlined.
This change works around that.
name old time/op new time/op delta
StackCopyPtr-8 108ms ± 5% 96ms ± 4% -10.40% (p=0.000 n=20+20)
StackCopy-8 82.6ms ± 3% 78.4ms ± 6% -5.15% (p=0.000 n=19+20)
StackCopyNoCache-8 130ms ± 3% 122ms ± 3% -6.44% (p=0.000 n=20+20)
Change-Id: If7d8a08c50a4e2e76e4331b399396c5dbe88c2ce
Reviewed-on: https://go-review.googlesource.com/108945
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Currently, when the runtime looks up the stack map for a frame, it
uses frame.continpc - 1 unless continpc is the function entry PC, in
which case it uses frame.continpc. As a result, if continpc is the
function entry point (which happens for deferred frames), it will
actually look up the stack map *following* the first instruction.
I think, though I am not positive, that this is always okay today
because the first instruction of a function can never change the stack
map. It's usually not a CALL, so it doesn't have PCDATA. Or, if it is
a CALL, it has to have the entry stack map.
But we're about to start emitting stack maps at every instruction that
changes them, which means the first instruction can have PCDATA
(notably, in leaf functions that don't have a prologue).
To prepare for this, tweak how the runtime looks up stack map indexes
so that if continpc is the function entry point, it directly uses the
entry stack map.
For #24543.
Change-Id: I85aa818041cd26aff416f7b1fba186e9c8ca6568
Reviewed-on: https://go-review.googlesource.com/109349
Reviewed-by: Rick Hudson <rlh@golang.org>
mips64 softfloat support is based on mips implementation and introduces
new enviroment variable GOMIPS64.
GOMIPS64 is a GOARCH=mips64{,le} specific option, for a choice between
hard-float and soft-float. Valid values are 'hardfloat' (default) and
'softfloat'. It is passed to the assembler as
'GOMIPS64_{hardfloat,softfloat}'.
Change-Id: I7f73078627f7cb37c588a38fb5c997fe09c56134
Reviewed-on: https://go-review.googlesource.com/108475
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Getcallerpc/sp no longer takes argument.
Change-Id: I80b30020e798990c59c8ffd0a4e078af6a75aea0
Reviewed-on: https://go-review.googlesource.com/109696
Reviewed-by: Ian Lance Taylor <iant@golang.org>
getcallersp is intrinsified, and so the dummy arg is no longer
needed. Remove it, as well as a few dummy args that are solely
to feed getcallersp.
Change-Id: Ibb6c948ff9c56537042b380ac3be3a91b247aaa6
Reviewed-on: https://go-review.googlesource.com/109596
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is a followup for CL 93156.
Fixes#22942.
Change-Id: Ic6e2de44011d041b91454353a6f2e3b0cf590060
Reviewed-on: https://go-review.googlesource.com/108095
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Also, avoid Region creation when tracing is disabled.
Unfortunate side-effect of this change is that we no longer trace
pre-existing regions in tracing, but we can add the feature in
the future when we find it useful and justifiable. Until then,
let's avoid the overhead from this low-level api use as much as
possible.
goos: linux
goarch: amd64
pkg: runtime/trace
// Trace disabled
BenchmarkStartRegion-12 2000000000 0.66 ns/op 0 B/op 0 allocs/op
BenchmarkNewTask-12 30000000 40.4 ns/op 56 B/op 2 allocs/op
// Trace enabled, -trace=/dev/null
BenchmarkStartRegion-12 5000000 287 ns/op 32 B/op 1 allocs/op
BenchmarkNewTask-12 5000000 283 ns/op 56 B/op 2 allocs/op
Also, skip other tests if tracing is already enabled.
Change-Id: Id3028d60b5642fcab4b09a74fd7d79361a3861e5
Reviewed-on: https://go-review.googlesource.com/109115
Reviewed-by: Peter Weinberger <pjw@google.com>
"Span" is a commonly used term in many distributed tracing systems
(Dapper, OpenCensus, OpenTracing, ...). They use it to refer to a
period of time, not necessarily tied into execution of underlying
processor, thread, or goroutine, unlike the "Span" of runtime/trace
package.
Since distributed tracing and go runtime execution tracing are
already similar enough to cause confusion, this CL attempts to avoid
using the same word if possible.
"Region" is being used in a certain tracing system to refer to a code
region which is pretty close to what runtime/trace.Span currently
refers to. So, replace that.
https://software.intel.com/en-us/itc-user-and-reference-guide-defining-and-recording-functions-or-regions
This CL also tweaks APIs a bit based on jbd and heschi's comments:
NewContext -> NewTask
and it now returns a Task object that exports End method.
StartSpan -> StartRegion
and it now returns a Region object that exports End method.
Also, changed WithSpan to WithRegion and it now takes func() with no
context. Another thought is to get rid of WithRegion. It is a nice
concept but in practice, it seems problematic (a lot of code churn,
and polluting stack trace). Already, the tracing concept is very low
level, and we hope this API to be used with great care.
Recommended usage will be
defer trace.StartRegion(ctx, "someRegion").End()
Left old APIs untouched in this CL. Once the usage of them are cleaned
up, they will be removed in a separate CL.
Change-Id: I73880635e437f3aad51314331a035dd1459b9f3a
Reviewed-on: https://go-review.googlesource.com/108296
Run-TryBot: Hyang-Ah Hana Kim <hyangah@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: JBD <jbd@google.com>
The Go's heap profile contains four kinds of samples
(inuse_space, inuse_objects, alloc_space, and alloc_objects).
The pprof tool by default chooses the inuse_space (the bytes
of live, in-use objects). When analyzing the current memory
usage the choice of inuse_space as the default may be useful,
but in some cases, users are more interested in analyzing the
total allocation statistics throughout the program execution.
For example, when we analyze the memory profile from benchmark
or program test run, we are more likely interested in the whole
allocation history than the live heap snapshot at the end of
the test or benchmark.
The pprof tool provides flags to control which sample type
to be used for analysis. However, it is one of the less-known
features of pprof and we believe it's better to choose the
right type of samples as the default when producing the profile.
This CL introduces a new type of profile, "allocs", which is
the same as the "heap" profile but marks the alloc_space
as the default type unlike heap profiles that use inuse_space
as the default type.
'go test -memprofile=...' command is changed to use the new
"allocs" profile type instead of the traditional "heap" profile.
Fixes#24443
Change-Id: I012dd4b6dcacd45644d7345509936b8380b6fbd9
Reviewed-on: https://go-review.googlesource.com/102696
Run-TryBot: Hyang-Ah Hana Kim <hyangah@gmail.com>
Reviewed-by: Russ Cox <rsc@golang.org>
The caller of epollctl expects it to return a negative errno value,
but it returns a positive errno value on mips, mips64 and ppc64.
The change fixes this.
Updates #23446
Change-Id: Ie6372eca6c23de21964caaaa433c9a45ef93531e
Reviewed-on: https://go-review.googlesource.com/89235
Reviewed-by: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Ever since we added sleep to the runtime back in 2008, we've
implemented it on GNU/Linux with the select (or pselect or pselect6)
system call. But the Linux kernel has a nanosleep system call,
which should be a tiny bit more efficient since it doesn't have to
check to see whether there are any file descriptors. So use it.
Change-Id: Icc3430baca46b082a4d33f97c6c47e25fa91cb9a
Reviewed-on: https://go-review.googlesource.com/108538
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Ignored reports whether sig is currently ignored.
This implementation only works applies on Unix systems for now. However, at
the moment that is also the case for Ignore() and several other signal
interaction methods, so that seems fair.
Fixes#22497
Change-Id: I7c1b1a5e12373ca5da44709500ff5acedc6f1316
Reviewed-on: https://go-review.googlesource.com/108376
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Use AT_TIMEKEEP ELF aux entry to access a kernel mapped ring of timehands structs.
The timehands are updated by the kernel periodically, but for accurate measure the
timecounter still needs to be queried.
Currently the fast path is used only when kern.timecounter.hardware==TSC-low
or kern.timecounter.hardware=='ARM MPCore Timecounter',
other timecounters revert back to regular system call.
TODO: add support for HPET timecounter on 386/amd64.
Change-Id: I321ca4e92be63ba21a2574b758ef5c1e729086ad
Reviewed-on: https://go-review.googlesource.com/93156
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
VDSO calls do manual stack alignment, which doesn't get tracked in the
pcsp table. Without accurate pcsp information, backtracing them is
dangerous, and causes a crash in the SIGPROF handler. Fortunately,
https://golang.org/cl/97315 saves a clean state in m.vdsoPC/SP. Change
to use those if they're present, without attempting a normal backtrace.
Fixes#24925
Change-Id: I4b8501ae73a9d18209e22f839773c4fe6102a509
Reviewed-on: https://go-review.googlesource.com/107778
Run-TryBot: Heschi Kreinick <heschi@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
CL 106735 changed to the new softfloat support on GOARM=5.
ARM assembly code that uses FP instructions not guarded on GOARM,
if any, will break. The easiest way to fix is probably to use Go
implementation on GOARM=5, like
MOVB runtime·goarm(SB), R11
CMP $5, R11
BEQ arm5
... FP instructions ...
RET
arm5:
CALL or JMP to Go implementation
Change-Id: I52fc76fac9c854ebe7c6c856c365fba35d3f560a
Reviewed-on: https://go-review.googlesource.com/107475
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
After CL 104636 cpu.X86.HasAVX is set early enough that it can be used
in runtime·memclrNoHeapPointers. Add an offset to use in assembly and
replace the only occurence of support_avx2.
Change-Id: Icada62efeb3e24d71251d55623a8a8602364c9a8
Reviewed-on: https://go-review.googlesource.com/106595
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
Currently, collecting a stack trace via runtime.Stack captures the stack for the
immediately running goroutines. This change extends those tracebacks to include
the tracebacks of their ancestors. This is done with a low memory cost and only
utilized when debug option tracebackancestors is set to a value greater than 0.
Resolves#22289
Change-Id: I7edacc62b2ee3bd278600c4a21052c351f313f3a
Reviewed-on: https://go-review.googlesource.com/70993
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This is more or less implied by the spec language on initialization,
but restate it for clarity.
Fixes#23112
Change-Id: Ibe5385acafe4eac38823de98a025cd37f7a77d3b
Reviewed-on: https://go-review.googlesource.com/103399
Reviewed-by: Austin Clements <austin@google.com>
The process reading the output of the binary may read stderr and
stdout separately, and may interleave reads from the two streams
arbitrarily. Because we explicitly serialize writes on the writer
side, we can reuse a timestamp within a single stream without losing
information; however, if we use the same timestamp for write on both
streams, the reader can't tell how to interleave them.
This change ensures that every time we change between the two fds, we
also bump the timestamp. That way, writes within a stream continue to
show the same timestamp, but a sorted merge of the contents of the two
streams always interleaves them in the correct order.
This still requires a corresponding change to the Playground parser to
actually reconstruct the correct interleaving. It currently merges the
two streams without reordering them; it should instead buffer them
separately and perform a sorted merge. (See
https://golang.org/cl/105496.)
Updates golang/go#24615.
Updates golang/go#24659.
Change-Id: Id789dfcc02eb4247906c9ddad38dac50cf829979
Reviewed-on: https://go-review.googlesource.com/105235
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Yury Smolsky <yury@smolsky.by>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
In #17528 it was discussed (off-topic to the actual issue) to reserve
GOARCH names for the RISC-V architecture. With the first RISC-V
Linux-capable development boards released (e.g. HiFive Unleashed),
Linux distributions being ported to RISC-V (e.g. Debian, Fedora) and
RISC-V support being added to gccgo (CL 96377), it becomes more likely
that Go software (and maybe Go itself) will be ported as well.
Add riscv and riscv64 (which is already used by gccgo), so Go 1.11 will
already recognize "*_riscv{,64}.go" as reserved files.
Change-Id: I042aab19c68751d82ea513e40f7b1d7e1ad924ea
Reviewed-on: https://go-review.googlesource.com/106256
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
After CL 104636 cpu.X86.HasAVX is set early enough that it can be used
to determine useAVXmemmove. Use it and remove support_avx.
Change-Id: Ib7a627bede2bf96c92362507e742bd833cb42a74
Reviewed-on: https://go-review.googlesource.com/106235
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes#23617
Note that this CL does not affect darwin/arm and darwin/arm64,
still TBD what, if anything, needs to be done for those.
This is a fix of CL 105975 which was reverted in CL 106155.
Needed to use movl instead of movq for 386.
Change-Id: I0db7f8087173869e60cc22c6c3124fa0a0739b46
Reviewed-on: https://go-review.googlesource.com/106156
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This reverts commit 76e92d1c9e.
Reason for revert: Seems to have broken the darwin/386 builder, the toolchain is barfing on the new inline assembly.
Change-Id: Ic83fa3c85148946529c5fd47d1e1669898031ace
Reviewed-on: https://go-review.googlesource.com/106155
Reviewed-by: Keith Randall <khr@golang.org>
After CL 104636 the feature flags in internal/cpu are initialized before
alginit and can now be used for aeshash feature detection. Also remove
now unused runtime variables:
x86:
support_ssse3
support_sse42
support_aes
arm64:
support_aes
Change-Id: I2f64198d91750eaf3c6cf2aac6e9e17615811ec8
Reviewed-on: https://go-review.googlesource.com/106015
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Once upon a time, the iOS exec wrapper needed to change the current
working directory for the binary being tested. To allow that, the
runtime raised a SIGINT signal that the wrapper caught, changed the
working directory and resumed the process.
These days, the current working directory is passed from the wrapper
to the runtime through a special entry in the app metadata and the
SIGINT handshake is not necessary anymore.
Remove the signaling from the runtime and the exec harness.
Change-Id: Ia53bcc9e4724d2ca00207e22b91ce80a05271b55
Reviewed-on: https://go-review.googlesource.com/106096
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
runtime.alginit needs runtime/support_{aes,ssse3,sse41} feature flag
to init aeshash function but internal/cpu.init not be called yet.
This CL will call internal/cpu.initialize before runtime.alginit, so
that we can move all cpu features related code to internal/cpu.
Change-Id: I00b8e403ace3553f8c707563d95f27dade0bc853
Reviewed-on: https://go-review.googlesource.com/104636
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The code reading these variables was removed in CL 41476. They are only
set but never read now, so remove them.
Change-Id: I6b0b8d813e9a3ec2a13586ff92746e00ad1b5bf0
Reviewed-on: https://go-review.googlesource.com/106095
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes#23617
Note that this CL does not affect darwin/arm and darwin/arm64,
still TBD what, if anything, needs to be done for those.
Change-Id: Ie1ee02a9f4d4d1fb9cd5dc432d900f926cc157db
Reviewed-on: https://go-review.googlesource.com/105975
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This ensures that gdb tests run on Windows by ignoring any line ending.
Works with gdb 7.7, however with gdb 7.9 and 7.12 gets an error
error:
internal-error: buildsym_init: Assertion `free_pendings == NULL'
failed.
Updates #21380
Change-Id: I6a6e5b2a1b5efdca4dfce009fcb9c134c87497d6
Reviewed-on: https://go-review.googlesource.com/102419
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
There are three places where we wait for the GC mark phase to
complete. Factor these all into a single helper function.
Fixes#24362.
Change-Id: I47f6a7147974f5b9a2869c527a024519070ba6f3
Reviewed-on: https://go-review.googlesource.com/102605
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
adjustpointers loops over a bitmap.
If the length of that bitmap is zero,
we can skip making the call entirely.
This speeds up stack copying when there are
no pointers present in either args or locals.
name old time/op new time/op delta
StackCopyPtr-8 101ms ± 4% 90ms ± 4% -10.95% (p=0.000 n=87+93)
StackCopy-8 80.1ms ± 4% 72.6ms ± 4% -9.41% (p=0.000 n=98+100)
StackCopyNoCache-8 121ms ± 3% 113ms ± 3% -6.57% (p=0.000 n=98+97)
Change-Id: I7a272e19bc9a14fa3e3318771ebd082dc6247d25
Reviewed-on: https://go-review.googlesource.com/104737
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
OpenBSD's __threxit syscall takes a pointer to a 32-bit value that will be
zeroed immediately before the thread exits. Make use of this instead of
zeroing freeWait from the exitThread assembly and using hacks like switching
to a static stack, so this works on 386.
Change-Id: I3ec5ead82b6496404834d148f713794d5d9da723
Reviewed-on: https://go-review.googlesource.com/105055
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The go/printer (and thus gofmt) uses a heuristic to determine
whether to break alignment between elements of an expression
list which is spread across multiple lines. The heuristic only
kicked in if the entry sizes (character length) was above a
certain threshold (20) and the ratio between the previous and
current entry size was above a certain value (4).
This heuristic worked reasonably most of the time, but also
led to unfortunate breaks in many cases where a single entry
was suddenly much smaller (or larger) then the previous one.
The behavior of gofmt was sufficiently mysterious in some of
these situations that many issues were filed against it.
The simplest solution to address this problem is to remove
the heuristic altogether and have a programmer introduce
empty lines to force different alignments if it improves
readability. The problem with that approach is that the
places where it really matters, very long tables with many
(hundreds, or more) entries, may be machine-generated and
not "post-processed" by a human (e.g., unicode/utf8/tables.go).
If a single one of those entries is overlong, the result
would be that the alignment would force all comments or
values in key:value pairs to be adjusted to that overlong
value, making the table hard to read (e.g., that entry may
not even be visible on screen and all other entries seem
spaced out too wide).
Instead, we opted for a slightly improved heuristic that
behaves much better for "normal", human-written code.
1) The threshold is increased from 20 to 40. This disables
the heuristic for many common cases yet even if the alignment
is not "ideal", 40 is not that many characters per line with
todays screens, making it very likely that the entire line
remains "visible" in an editor.
2) Changed the heuristic to not simply look at the size ratio
between current and previous line, but instead considering the
geometric mean of the sizes of the previous (aligned) lines.
This emphasizes the "overall picture" of the previous lines,
rather than a single one (which might be an outlier).
3) Changed the ratio from 4 to 2.5. Now that we ignore sizes
below 40, a ratio of 4 would mean that a new entry would have
to be 4 times bigger (160) or smaller (10) before alignment
would be broken. A ratio of 2.5 seems more sensible.
Applied updated gofmt to all of src and misc. Also tested
against several former issues that complained about this
and verified that the output for the given examples is
satisfactory (added respective test cases).
Some of the files changed because they were not gofmt-ed
in the first place.
For #644.
For #7335.
For #10392.
(and probably more related issues)
Fixes#22852.
Change-Id: I5e48b3d3b157a5cf2d649833b7297b33f43a6f6e
Currently, the runtime falls back to asking for any address the OS can
offer for the heap when it runs out of hint addresses. However, the
race detector assumes the heap lives in [0x00c000000000,
0x00e000000000), and will fail in a non-obvious way if we go outside
this region.
Fix this by actively throwing a useful error if we run out of heap
hints in race mode.
This problem is currently being triggered by TestArenaCollision, which
intentionally triggers this fallback behavior. Fix the test to look
for the new panic message in race mode.
Fixes#24670.
Updates #24133.
Change-Id: I57de6d17a3495dc1f1f84afc382cd18a6efc2bf7
Reviewed-on: https://go-review.googlesource.com/104717
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Make the StackCopyNoCache test easier to read.
Add a StackCopyPtr test that actually has some pointers
that need adjusting.
Change-Id: I5b07c26f40cb485c9de97ed63fac89a9e6f36650
Reviewed-on: https://go-review.googlesource.com/104195
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This is the first commit of a series that will add WebAssembly
as an architecture target. The design document can be found at
https://docs.google.com/document/d/131vjr4DH6JFnb-blm_uRdaC0_Nv3OUwjEY5qVCxCup4.
The GOARCH name "wasm" is the official abbreviation of WebAssembly.
The GOOS name "js" got chosen because initially the host environment
that executes WebAssembly bytecode will be web browsers and Node.js,
which both use JavaScript to embed WebAssembly. Other GOOS values
may be possible later, see:
https://github.com/WebAssembly/design/blob/master/NonWeb.md
Updates #18892
Change-Id: Ia25b4fa26bba8029c25923f48ad009fd3681933a
Reviewed-on: https://go-review.googlesource.com/102835
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Decode AT_PAGESZ to determine physPageSize on dragonfly.
Change-Id: I7236d7cbe43433f16dffddad19c1655bc0c7f31d
Reviewed-on: https://go-review.googlesource.com/103257
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Decode AT_PAGESZ to determine physPageSize on netbsd.
Also rename vdso_none.go to auxv_none.go which matches its purpose more
closely.
Akin to CL 99780 which did the same for freebsd.
Change-Id: Iea4322f861ff0f3515e9051585dbb442f024326b
Reviewed-on: https://go-review.googlesource.com/102677
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Use the __vdso_clock_gettime fast path via the vDSO on linux/arm64 to
speed up nanotime and walltime. This results in the following
performance improvement for time.Now on Cavium ThunderX:
name old time/op new time/op delta
TimeNow 442ns ± 0% 163ns ± 0% -63.16% (p=0.000 n=10+10)
And benchmarks on VDSO
BenchmarkClockVDSOAndFallbackPaths/vDSO 10000000 166 ns/op
BenchmarkClockVDSOAndFallbackPaths/Fallback 3000000 456 ns/op
Change-Id: I326118c6dff865eaa0569fc45d1fc1ff95cb74f6
Reviewed-on: https://go-review.googlesource.com/99855
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes#24546
Change-Id: I99ebd5bc18e5c5e42eee4689644a7a8b02405f31
Reviewed-on: https://go-review.googlesource.com/102616
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This was a typo mistake according to if cond and runtime/mheap.go:323
Change-Id: Id046d4afbfe0ea43cb29e1a9f400e1f130de221d
Reviewed-on: https://go-review.googlesource.com/102575
Reviewed-by: Austin Clements <austin@google.com>
As found by unparam. Picked the low-hanging fruit, consisting only of
errors that were always nil and results that were never used. Left out
those that were useful for consistency with other func signatures.
Change-Id: I06b52bbd3541f8a5d66659c909bd93cb3e172018
Reviewed-on: https://go-review.googlesource.com/102418
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
As pointed out by Josh Bleecher Snyder in CL 99780.
The check is for GOARM > 6, so suggest to recompile with either GOARM=5
or GOARM=6.
Change-Id: I6a97e87bdc17aa3932f5c8cb598bba85c3cf4be9
Reviewed-on: https://go-review.googlesource.com/101936
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
AT_HWCAP is not available on FreeBSD-11.1-RELEASE or earlier and the wrong const was used.
Use the correct value, and initialize hwcap with ^uint32(0) inorder not to fail the VFP tests.
Fixes#24507.
Change-Id: I5c3eed57bb53bf992b7de0eec88ea959806306b9
Reviewed-on: https://go-review.googlesource.com/102355
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fixes#14327
Much of the code is based on the linux/amd64 code that implements these
build modes, and code is shared where possible.
Change-Id: Ia510f2023768c0edbc863aebc585929ec593b332
Reviewed-on: https://go-review.googlesource.com/93875
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For each replacement, test case is added to new 386enc.s file
with exception of EMMS, SYSENTER, MFENCE and LFENCE as they
are already covered in amd64enc.s (same on amd64 and 386).
The replacement became less obvious after go vet suggested changes
Before:
BYTE $0x0f; BYTE $0x7f; BYTE $0x44; BYTE $0x24; BYTE $0x08
Changed to MOVQ (this form is being tested):
MOVQ M0, 8(SP)
Refactored to FP-relative access (go vet advice):
MOVQ M0, val+4(FP)
Change-Id: I56b87cf3371b6ad81ad0cd9db2033aee407b5818
Reviewed-on: https://go-review.googlesource.com/101475
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
Decode AT_PAGESZ to determine physPageSize on freebsd/{386,amd64,arm}
and AT_HWCAP for hwcap and hardDiv on freebsd/arm. Also use hwcap to
perform the FP checks in checkgoarm akin to the linux/arm
implementation.
Change-Id: I532810a1581efe66277e4305cb234acdc79ee91e
Reviewed-on: https://go-review.googlesource.com/99780
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
By moving exported methods to the front of method lists, filtering
down to only the exported methods just needs a count of how many
exported methods exist, which the compiler can statically
provide. This allows getting rid of the exported method cache.
For #22075.
Change-Id: I8eeb274563a2940e1347c34d673f843ae2569064
Reviewed-on: https://go-review.googlesource.com/100846
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When there are plugins, there may not be a unique copy of runtime
functions like goexit, mcall, etc. So identifying them by entry
address is problematic. Instead, keep track of each special function
using a field in the symbol table. That way, multiple copies of
the same runtime function will be treated identically.
Fixes#24351Fixes#23133
Change-Id: Iea3232df8a6af68509769d9ca618f530cc0f84fd
Reviewed-on: https://go-review.googlesource.com/100739
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The syscall package currently declares RawSyscall6 for every GOOS, but
does not define it on Solaris. This leads to code using said function
to compile but it will not link. Fix it by adding RawSyscall6 and make
it panic.
Also remove the obsolete comment above runtime.syscall_syscall as
pointed out by Aram.
Updates #24357
Change-Id: I1b1423121d1c99de2ecc61cd9a935dba9b39e3a4
Reviewed-on: https://go-review.googlesource.com/100655
Reviewed-by: Aram Hăvărneanu <aram@mgk.ro>
In CL 98015, findnull was rewritten so it uses bytes.IndexByte.
This broke the build on plan9/amd64 because the implementation
of bytes.IndexByte on AMD64 relies on SSE instructions while
floating point instructions are not allowed in the note handler.
This change fixes findnull by using the former implementation
on Plan 9, so it doesn't use bytes.IndexByte.
Fixes#24387.
Change-Id: I084d1a44d38d9f77a6c1ad492773f0a98226be16
Reviewed-on: https://go-review.googlesource.com/100577
Run-TryBot: David du Colombier <0intro@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Every time I poke at #14921, the g.waitreason string
pointer writes show up.
They're not particularly important performance-wise,
but it'd be nice to clear the noise away.
And it does open up a few extra bytes in the g struct
for some future use.
Change-Id: I7ffbd52fbc2a286931a2218038fda52ed6473cc9
Reviewed-on: https://go-review.googlesource.com/99078
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
