Major changes between hybi-08 and hybi-13
- hybi-08 uses Sec-WebSocket-Origin, but hybi-13 uses Origin
- hybi-13 introduces new close status codes.
hybi-17 spec (editorial changes of hybi-13) mentions
- if a server doesn't support the requested version, it MUST respond
with Sec-WebSocket-Version headers containing all available versions.
- client MUST close the connection upon receiving a masked frame
- server MUST close the connection upon receiving a non-masked frame
note that hybi-17 still uses "Sec-WebSocket-Version: 13"
see http://code.google.com/p/pywebsocket/wiki/WebSocketProtocolSpec
for changes between spec drafts.
R=golang-dev, adg
CC=golang-dev
https://golang.org/cl/5147043
This can work only if there is no type info required to initialize the decoder,
but it's easy and gains a few percent in the basic benchmarks by avoiding
bufio when it's a bytes.Buffer - a testing-only scenario, I admit.
Add a comment about what Decode expects from the input.
R=rsc
CC=golang-dev
https://golang.org/cl/5165048
When ncpu < 2, work.nproc is always 1 which results in infinite helper
threads being created if gomaxprocs > 1 and MaxGcproc > 1. Avoid this
by using the same limits as imposed helpgc().
R=golang-dev, rsc, dvyukov
CC=golang-dev
https://golang.org/cl/5176044
This change adds the osyield and usleep
functions and code to read the number of
processors from /dev/sysstat.
I also changed SysAlloc to return nil
when brk fails (it was returning -1).
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/5177049
This requires making the .dynamic section writable, as the
dynamic linker will change the value of the DT_DEBUG tag at
runtime. The DT_DEBUG tag is used by gdb to find all loaded
shared libraries.
R=rsc
CC=golang-dev
https://golang.org/cl/5189044
The loop recognizer uses the standard dominance
frontiers but gets confused by dead code, which
has a (not explicitly set) rpo number of 0, meaning it
looks like the head of the function, so it dominates
everything. If the loop recognizer encounters dead
code while tracking backward through the graph
it fails to recognize where it started as a loop, and
then the optimizer does not registerize values loaded
inside that loop. Fix by checking rpo against rpo2r.
Separately, run a quick pass over the generated
code to squash JMPs to JMP instructions, which
are convenient to emit during code generation but
difficult to read when debugging the -S output.
A side effect of this pass is to eliminate dead code,
so the output files may be slightly smaller and the
optimizer may have less work to do.
There is no semantic effect, because the linkers
flatten JMP chains and delete dead instructions
when laying out the final code. Doing it here too
just makes the -S output easier to read and more
like what the final binary will contain.
The "dead code breaks loop finding" bug is thus
fixed twice over. It seemed prudent to fix loopit
separately just in case dead code ever sneaks back
in for one reason or another.
R=ken2
CC=golang-dev
https://golang.org/cl/5190043
The spin-off renames some types. The new names are simply better:
image.Color -> color.Color
image.ColorModel -> color.Model
image.ColorModelFunc -> color.ModelFunc
image.PalettedColorModel -> color.Palette
image.RGBAColor -> color.RGBA
image.RGBAColorModel -> color.RGBAModel
image.RGBA64Color -> color.RGBA64
image.RGBA64ColorModel -> color.RGBA64Model
(similarly for NRGBAColor, GrayColorModel, etc)
The image.ColorImage type stays in the image package, but is renamed:
image.ColorImage -> image.Uniform
The image.Image implementations (image.RGBA, image.RGBA64, image.NRGBA,
image.Alpha, etc) do not change their name, and gain a nice symmetry:
an image.RGBA is an image of color.RGBA, etc.
The image.Black, image.Opaque uniform images remain unchanged (although
their type is renamed from image.ColorImage to image.Uniform). The
corresponding color types (color.Black, color.Opaque, etc) are new.
Nothing in the image/ycbcr is renamed yet. The ycbcr.YCbCrColor and
ycbcr.YCbCrImage types will eventually migrate to color.YCbCr and
image.YCbCr, but that will be a separate CL.
R=r, bsiegert
CC=golang-dev
https://golang.org/cl/5132048
Fix for new regexp library ($ isn't end of line any more).
Don't assume . is in PATH.
R=golang-dev, dsymonds
CC=golang-dev
https://golang.org/cl/5175052
This implements a replacer for when all old strings are single
bytes, but new values are not.
BenchmarkHTMLEscapeNew 1000000 1090 ns/op
BenchmarkHTMLEscapeOld 1000000 2049 ns/op
R=rsc
CC=golang-dev
https://golang.org/cl/5176043
My previous CL:
changeset: 9645:ce2e5f44b310
user: Russ Cox <rsc@golang.org>
date: Tue Sep 06 10:24:21 2011 -0400
summary: gc: unify stack frame layout
introduced a bug wherein no variables were
being registerized, making Go programs 2-3x
slower than they had been before.
This CL fixes that bug (along with some others
it was hiding) and adds a test that optimization
makes at least one test case faster.
R=ken2
CC=golang-dev
https://golang.org/cl/5174045
When all old & new string values are single bytes,
byteReplacer is now used, instead of the generic
algorithm.
BenchmarkGenericMatch 10000 102519 ns/op
BenchmarkByteByteMatch 1000000 2178 ns/op
fast path, when nothing matches:
BenchmarkByteByteNoMatch 1000000 1109 ns/op
comparisons to multiple Replace calls:
BenchmarkByteByteReplaces 100000 16164 ns/op
comparison to strings.Map:
BenchmarkByteByteMap 500000 5454 ns/op
R=rsc
CC=golang-dev
https://golang.org/cl/5175050
The map implementation was using the C idiom of using
a pointer just past the end of its table as a limit pointer.
Unfortunately, the garbage collector sees that pointer as
pointing at the block adjacent to the map table, pinning
in memory a block that would otherwise be freed.
Fix by making limit pointer point at last valid entry, not
just past it.
Reviewed by Mike Burrows.
R=golang-dev, bradfitz, lvd, r
CC=golang-dev
https://golang.org/cl/5158045
Running test/garbage/parser.out.
On a 4-core Lenovo X201s (Linux):
31.12u 0.60s 31.74r 1 cpu, no atomics
32.27u 0.58s 32.86r 1 cpu, atomic instructions
33.04u 0.83s 27.47r 2 cpu
On a 16-core Xeon (Linux):
33.08u 0.65s 33.80r 1 cpu, no atomics
34.87u 1.12s 29.60r 2 cpu
36.00u 1.87s 28.43r 3 cpu
36.46u 2.34s 27.10r 4 cpu
38.28u 3.85s 26.92r 5 cpu
37.72u 5.25s 26.73r 6 cpu
39.63u 7.11s 26.95r 7 cpu
39.67u 8.10s 26.68r 8 cpu
On a 2-core MacBook Pro Core 2 Duo 2.26 (circa 2009, MacBookPro5,5):
39.43u 1.45s 41.27r 1 cpu, no atomics
43.98u 2.95s 38.69r 2 cpu
On a 2-core Mac Mini Core 2 Duo 1.83 (circa 2008; Macmini2,1):
48.81u 2.12s 51.76r 1 cpu, no atomics
57.15u 4.72s 51.54r 2 cpu
The handoff algorithm is really only good for two cores.
Beyond that we will need to so something more sophisticated,
like have each core hand off to the next one, around a circle.
Even so, the code is a good checkpoint; for now we'll limit the
number of gc procs to at most 2.
R=dvyukov
CC=golang-dev
https://golang.org/cl/4641082
This is a possible optimization. I'm not sure the complexity is worth it.
The new benchmark in escape_test is 46us without and 35us with the optimization.
R=nigeltao
CC=golang-dev
https://golang.org/cl/5168041
This removes a few cases from escapeAction and clarifies the
responsibilities of urlFilter which no longer does any
escaping or normalization. It is now solely a filter.
R=nigeltao
CC=golang-dev
https://golang.org/cl/5162043
The letter is a holdover from C and unnecessary in Go.
Gofix module included.
Fixes#2306.
R=golang-dev, gri, dsymonds
CC=golang-dev
https://golang.org/cl/5158043
HTML5 allows embedded SVG and MathML.
Code searches show SVG is used for graphing.
This changes transition to deal with constructs like
<svg xmlns:xlink="http://www.w3.org/1999/xlink">
It changes attr and clients to call a single function that combines
the name lookup and "on" prefix check to determine an attribute
value type given an attribute name.
That function uses heuristics to recognize that
xlink:href and svg:href
have URL content, and that data-url is likely contains URL content,
since "javascript:" injection is such a problem.
I did a code search over a closure templates codebase to determine
patterns of custom attribute usage. I did something like
$ find . -name \*.soy | \
xargs egrep perl -ne 'while (s/\b((data-|\w+:)\w+)\s*=//) { print "$1\n"; }' | \
sort | uniq
to produce the list at the bottom.
Filtering that by egrep -i 'src|url|uri' produces
data-docConsumptionUri
data-docIconUrl
data-launchUrl
data-lazySrc
data-pageUrl
data-shareurl
data-suggestServerUrl
data-tweetUrl
g:secondaryurls
g:url
which seem to match all the ones that are likely URL content.
There are some short words that match that heuristic, but I still think it decent since
any custom attribute that has a numeric or enumerated keyword value will be unaffected by
the URL assumption.
Counterexamples from /usr/share/dict:
during, hourly, maturity, nourish, purloin, security, surly
Custom attributes present in existing closure templates codebase:
buzz:aid
data-a
data-action
data-actor
data-allowEqualityOps
data-analyticsId
data-bid
data-c
data-cartId
data-categoryId
data-cid
data-command
data-count
data-country
data-creativeId
data-cssToken
data-dest
data-docAttribution
data-docConsumptionUri
data-docCurrencyCode
data-docIconUrl
data-docId
data-docPrice
data-docPriceMicros
data-docTitle
data-docType
data-docid
data-email
data-entityid
data-errorindex
data-f
data-feature
data-fgid
data-filter
data-fireEvent
data-followable
data-followed
data-hashChange
data-height
data-hover
data-href
data-id
data-index
data-invitable
data-isFree
data-isPurchased
data-jid
data-jumpid
data-launchUrl
data-lazySrc
data-listType
data-maxVisiblePages
data-name
data-nid
data-nodeid
data-numItems
data-numPerPage
data-offerType
data-oid
data-opUsesEquality
data-overflowclass
data-packageName
data-pageId
data-pageUrl
data-pos
data-priceBrief
data-profileIds
data-query
data-rating
data-ref
data-rentalGrantPeriodDays
data-rentalactivePeriodHours
data-reviewId
data-role
data-score
data-shareurl
data-showGeLe
data-showLineInclude
data-size
data-sortval
data-suggestServerType
data-suggestServerUrl
data-suggestionIndex
data-tabBarId
data-tabBarIndex
data-tags
data-target
data-textColor
data-theme
data-title
data-toggletarget
data-tooltip
data-trailerId
data-transactionId
data-transition
data-ts
data-tweetContent
data-tweetUrl
data-type
data-useAjax
data-value
data-width
data-x
dm:index
dm:type
g:aspects
g:decorateusingsecondary
g:em
g:entity
g:groups
g:id
g:istoplevel
g:li
g:numresults
g:oid
g:parentId
g:pl
g:pt
g:rating_override
g:secondaryurls
g:sortby
g:startindex
g:target
g:type
g:url
g:value
ga:barsize
ga:css
ga:expandAfterCharsExceed
ga:initialNumRows
ga:nocancelicon
ga:numRowsToExpandTo
ga:type
ga:unlockwhenrated
gw:address
gw:businessname
gw:comment
gw:phone
gw:source
ng:controller
xlink:href
xml:lang
xmlns:atom
xmlns:dc
xmlns:jstd
xmlns:ng
xmlns:og
xmlns:webstore
xmlns:xlink
R=nigeltao
CC=golang-dev
https://golang.org/cl/5119041
The normalization that prevents element name and comment injection in
<{{.}}
by converting it to
<{{.}}
breaks
<!DOCTYPE html>
Instead of splitting states to have a start of document state and a text
state, I whitelist <!DOCTYPE.
R=nigeltao
CC=golang-dev
https://golang.org/cl/5131051
