*ast.ArrayTypes are type expressions like "[]foo" or "[2]int". They
show up as standalone types (e.g. "var foo []int") and as part of
composite literals (e.g. "[]int{}"). I made the following
improvements:
- Always expect a type name for array types.
- Add a "type modifier" for array types so completions can be smart
when we know the expected type. For example:
var foo []int
foo = []i<>
we know we want a type name, but we also know the expected type is
"[]int". When evaluating type names such as "int" we turn the type
into a slice type "[]int" to match against the expected type.
- Tweak the AST fixing to add a phantom selector "_" after a naked
"[]" so you can complete directly after the right bracket.
I split out the type name related type inference bits into a separate
typeNameInference struct. It had become confusing and complicated,
especially now that you can have an expected type and expect a type
name at the same time.
Change-Id: I00878532187ee5366ab8d681346532e36fa58e5f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/197438
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change modifies the invalidContent function to take a file change
type. This allows us to eliminate the separate invalidateMetadata
function. The logic of watching changed files is then further pushed
into the caching layer.
Updates golang/go#34218
Change-Id: Id31b3931c45ec408b6e7b4a362e00f9091ba4f70
Reviewed-on: https://go-review.googlesource.com/c/tools/+/201221
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Originally the fuzzy matcher required a match in the final candidate
segment. For example, to match the candidate "foo.bar", the input had
to have at least one character that matched "bar". I previously
removed this requirement as it is too restrictive for deep completions
to be useful.
However, there was still some lingering final-segment favoritism in
the matching algorithm. In particular, there were penalties for not
matching the final segment's first character and for not matching the
final segment's word initial characters. However, these penalties only
made sense when we also required a final segment match. Consider this
example:
User input: "U"
Candidate "ErrUnexpectedEOF" - with only a single segment, we got big
penalties for not matching the leading "E" (since it is the final
segment).
Candidate "ErrUnexpectedEOF.Error" - "ErrUnexpectedEOF" is no longer
the final segment, so we didn't get penalties. And we didn't get
penalties for the final segment "Error" because we finished matching
after the first "U". As a result, this candidate slips through with a
higher score.
Fix by simplifying the skip penalty. Now we only penalize for skipping
the first character of the first or final segment (and the penalty is
lower). For deep completions, the first and final segment are both
"important" segments, so I think it makes sense to focus on both of
them. We don't want to penalize all segment starts because that makes
it harder to match deeper candidates where you often "ignore"
intermediate segments.
I had to adjust a few scores in the tests, but I don't think the
impact will be too big other than fixing the bug.
Fixesgolang/go#35062.
Change-Id: Id17a5c80bf0f80ce252fe990ccfbd51c1bac1c72
Reviewed-on: https://go-review.googlesource.com/c/tools/+/202638
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Remove the input type option. Now everything behaves as "symbol".
We don't use the "text" or "filename" input types, and I don't foresee
us using them. Removing them simplifies the code a bit, but simplifies
the tests a lot. It was tedious to make changes to the matcher logic
because you had to fret over test failure details that didn't actually
matter because we didn't use that functionality.
Change-Id: I651debde9e63ee283d7bc3ad718d22f4b9a127c0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/202637
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
For *ast.Ident completion requests, this checks the parent node to
see if the token begins a statement and then based on the path adds
possible keyword completion candidates. The test lists some cases where
this approach cannot provide completion candidates.
The biggest thing missing is keywords for file level declarations
Updates golang/go#34009
Change-Id: I9d9c0c1eb88e362613feca66d0eea6b88705b9b0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/196664
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
I made a mistake with the initial port of iexport.go in that I left the
original package path of the top-level package in the export data.
The package path for the top-level package should have been empty so
that it can be changed when the package is loaded.
Updates golang/go#28260
Change-Id: I781e63317a54eaf59385f25d18609e73ff97d572
Reviewed-on: https://go-review.googlesource.com/c/tools/+/201097
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This change allows us to hanel cancel messages as they go into the queue, and
cancel messages that are ahead of them in the queue but not being processed yet.
This should reduce the amount of redundant work that we do when we are handling
a cancel storm.
Change-Id: Id1a58991407d75b68d65bacf96350a4dd69d4d2b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/200766
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
To avoid proposing unusable completions, such as those in modules that
need a replace statement to be usable, we need to know what module a
directory is in. That involves walking up the directory tree to find a
go.mod file, which is expensive to do over and over. Really, we just
need to check if the directory we're in has a go.mod file, then use the
parent dir's results.
Add module information to the cache and use it when figuring out what
module a dir is in.
Change-Id: Ia74ba9b37d73fca5e6786a94c73c8fd71b591645
Reviewed-on: https://go-review.googlesource.com/c/tools/+/202541
Run-TryBot: Heschi Kreinick <heschi@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
A continuation of CL 202298, only for analysis errors.
Change-Id: I957d52cef31938ef66be73463e92695a5b56869c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/202540
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Since a user's module cache is generally going to be much bigger than
their main module, one would expect that caching just information about
the module cache would be sufficient. It turns out that's not correct.
When we discover something in the module cache, we have to make sure
that a different version of it isn't already in scope. Doing that can
require information about the main module or replace targets, so that
needs to be cached too.
Concretely, when I'm working in x/tools, if a scan discovers a version
of x/tools in the module cache, it should usually ignore that version.
But that might not be true in more complicated cases, especially those
involving nested modules whose boundaries change.
So, cache everything except GOROOT. Since the new data is mutable,
we store it separately from the module cache data so that it can be
discarded easily between runs.
Change-Id: I47364f6c0270fee03af8898fec6c85d1b9c8d780
Reviewed-on: https://go-review.googlesource.com/c/tools/+/202045
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Scan most sources, including GOPATH, the module cache, the main module,
and replace targets as appropriate. Use the cached stdlib instead of
scanning GOROOT.
We heavily cache the contents of the module cache, so performance is
decent. But we have to look at all the modules not in the module cache
too to get the right versions of modules (see
(*ModuleResolver).canonicalize), which currently isn't cached at all,
even just for a single run. That ends up being pretty expensive.
The implementation changes are relatively small; add package name
loading to scan(), cache that result, and allow callers to control what
directories are scanned so that it can skip GOROOT.
I also cleared out most of the stdlib from the unimported completion
test and added a simple external completion to it for safety's sake.
Change-Id: Id50fd4703b1126be35a000fe90719e19c3ab84bf
Reviewed-on: https://go-review.googlesource.com/c/tools/+/199178
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This function was removed in CL 202298, but used in CL 200597.
Analysis diagnostics should be converted to the source.Error type in the
analysis runner as a complete fix, but this is fine for now.
Change-Id: Ie5f3f566719073d7df6ab4646f855c9f9ce22ad7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/202539
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Dominik Honnef <dominik@honnef.co>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL adds support for "related information", which allows
associating additional source positions and messages with a
diagnostic.
Change-Id: Ifc0634f68c9f3724b6508dc6331c62c819a24f78
Reviewed-on: https://go-review.googlesource.com/c/tools/+/200597
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds a source.Error type which is used to collect the error
information that comes out of the loading, parsing, and type checking
stages. We also add specific sources per-error, rather than having them
all be labeled as "LSP".
This change will enable follow-ups that do a better job of extracting
error ranges.
Change-Id: I3fbb5e42d66aa2c5bb1b2f41d1eadfc45f3a749b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/202298
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
It's been a while since we updated, and this will make things easier for
users who want to try new features.
Change-Id: I3accd77e23bf2d0bbafaba16dcab8179e6a14253
Reviewed-on: https://go-review.googlesource.com/c/tools/+/201638
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
These verbs are supported as of Go 1.13.
Updates golang/go#34993
Change-Id: Ib7892e45b51073e3771bebb652a8fe3a1c6ae3c6
Reviewed-on: https://go-review.googlesource.com/c/tools/+/202041
Run-TryBot: Caleb Spare <cespare@gmail.com>
Reviewed-by: Alan Donovan <adonovan@google.com>
We were caching the package before setting the handle, so a
checkPackageHandle might be in use before it was fully created.
Change-Id: Ic98e7c351cbed5e4caa87098e95ad04d4f54f8df
Reviewed-on: https://go-review.googlesource.com/c/tools/+/202040
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
A package really should always be associated with its snapshot rather
than its view. This eliminates some extra parameters in a few utility
functions.
Change-Id: I60f9b7286e0072d3268602f6bd32052a3d2e5559
Reviewed-on: https://go-review.googlesource.com/c/tools/+/202039
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Before this commit, when running imports.Process concurrently, the program
panics with a fatal error due to concurrent map iterations and map writes.
This CL fixes this by adding a copy of the map to the packageInfo structure.
Fixed#34895
Change-Id: If009e6108813f86495c7e20e69739186b8b236d7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/200865
Run-TryBot: Heschi Kreinick <heschi@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Make sure that the user's environment doesn't affect the adhoc package
tests. Noticed that one test failed with GO111MODULE=on, so added a hack
to try and support that case. Not sure if that's the right approach.
Fixesgolang/go#33374
Change-Id: I373cd57b9982cd46193c61d08e262fd50b5b7e18
Reviewed-on: https://go-review.googlesource.com/c/tools/+/195319
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Currently array and slice literals don't work very well for
completion. When go/parser is not expecting a type, it often turns
array types (e.g. "[]int") into *ast.BadExpr, which messes up
completion because we can't figure out the prefix from *ast.BadExpr,
and *ast.BadExprs don't get type checked.
This change addresses the first problem of not being able to figure
out the prefix. If we see an *ast.BadExpr, we now blindly try to
reparse it as a composite literal by adding on "{}". If we end up with
an *ast.CompositeLit with an *ast.ArrayType "Type", we swap
the *ast.BadExpr for the *ast.ArrayType. This approach is dumb but
simple, and fixes lexical completions in array types.
Change-Id: Ifa42e646bcbf2a30170d73e6dd11982384d40b43
Reviewed-on: https://go-review.googlesource.com/c/tools/+/197437
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
There was a regression where gopls would not type-check any package with
a bad import. This change fixes the regression and adds a test to make
sure it doesn't happen again.
Change-Id: I3acf0917d46e9444c20135559f057f0ecd20e15b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/201539
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change adds support for converting HistogramFloat64Data and
HistogramInt64Data to *wire.Metric. Timestamps are not attached
as they are not yet available.
What works:
* convertMetric will now convert HistogramInt64Data and
HistogramFloat64Data to *wire.Metric.
What does not work yet:
* StartTime and EndTime will not be attached to timeseries and
points.
* MetricDescriptors will not have a unit attached.
* No labels will be attached to timeseries.
* Distributions will not have SumOfSquaredDeviation attached.
Updates golang/go#33819
Change-Id: Iee52ab751542ee1ade07ef32120de853b41fd27b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/200538
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
This is specifically necessary to test CL 197879.
Change-Id: I2b4bbdd322d52097fc1444242d3e26a3d8ea75e7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/201520
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
We now continue deep completion search across function calls. The
function must take no arguments and return a single argument. For
example, when completing "fo<>" you might get candidates such as
"foo.bar().baz()".
Previously we would stop searching for deep completions when we hit a
function call. For example, we would stop at "foo.bar()", never
finding "foo.bar().baz()". At the time I was worried about the search
scope growing too large, but now that we dynamically limit the search
scope there isn't much left to worry about.
Change-Id: I48772c154400662876682503c1f58ef6e3dca688
Reviewed-on: https://go-review.googlesource.com/c/tools/+/201222
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Previously we unconditionally qualified literal candidate types with
their package. For example:
var buf *bytes.Buffer
buf = &bytes.Bu<>
would complete to:
buf = &bytes.bytes.Buffer{}
Now we don't qualify the type if the cursor position is in the
selector of an *ast.SelectorExpr. We only generate literal candidates
for type names, so if we are in a selector then we can assume it is a
package qualified type (as opposed to an object field).
We also handle the insertion of "&" for literal pointers better. If you are in
the selector of an *ast.SelectorExpr, we prepend the "&" to the beginning of the
expression rather than the selector. For example, you will end up with
"&bytes.Buffer{}" instead of "bytes.&Buffer{}".
Updates golang/go#34872.
Change-Id: I812aa809cd4e649a429853386789f80033412814
Reviewed-on: https://go-review.googlesource.com/c/tools/+/201200
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Now we offer completion candidates for labels when completing "break",
"continue", and "goto" statements. We are reasonably smart about
filtering unusable labels, except we don't filter "goto" candidates
that jump across variable definitions.
Fixesgolang/go#33987.
Change-Id: If296a7579845aba5d86c7050ab195c35d4b147ed
Reviewed-on: https://go-review.googlesource.com/c/tools/+/197417
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Recently been noticing errors where we don't have full metadata for a
given package. It seems to me that, since we added the context to the
packages.Config, there have been cases where the context is canceled on
the first load, and then we type-check with incomplete data. I'm still
not sure if allowing go/packages to be canceled is the correct approach.
Change-Id: I6767ce763538bd579458c8f8db07f15c9eec7b4a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/201518
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Muir Manders <muir@mnd.rs>
Reviewed-by: Michael Matloob <matloob@golang.org>
Ran gopls with staticcheck enabled and found these warnings.
Change-Id: I0b41c0daa19ac98c778d643530c9cb3f5f994399
Reviewed-on: https://go-review.googlesource.com/c/tools/+/201442
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
This change handles a specific case where `go list` returns an error on
a file that lacks a package declaration. If only one package is returned
as a response, we should add that file to that package, since it may
have valid content in an overlay.
This change uses the internal/span package to correctly parse the error
message from `go list`.
Change-Id: I5909c4fd765746df1003685aa915b7c5f9cdcee5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/201220
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
This span resulted in misleading information, since it would appear any
time you called the Check function. This function often returns cached
results, so it's not particularly useful.
Change-Id: I26be652a99b906fb2e8703ff9af86fbe2ef5fc5d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/201219
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It's hard to prevent two independent analysis writers from
using the same name so enforcing this requiremnet just
causes trouble for analysis writers. Remove the requirement.
It would be nice to guarantee that two packages don't introduce
analyses with the same name, but because analyses are values
and not types, they don't have a logical package.
Change-Id: Iad3493e02ceae04ba3e9015c3e9c68ed9fa4b5a2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/201218
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Dominik Honnef <dominik@honnef.co>
Adding a second module to the gopackagestest configuration exposed a
flaky failure. go/packages was attempting to construct an ID relative to
a module. Depending on which module it saw first, it could construct a
relative path based on the incorrect module. Add an additional module to
the overlay tests to make sure we don't regress here.
Also, fix up a few staticcheck errors that were spotted along the way.
Change-Id: I53c2c0eee62ff88eadcb96a3770452dd7799312e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/199645
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
The -rpc.trace flag in gopls enables logging in "lsp inspector format".
Currently sent responses isn't parsed by the lsp inspector so it fails to
parse gopls logs.
The lsp inspector regexp matcher requires the duration to be prefixed with
"took" instead of "in", e.g. "took <d>ms.".
This change updates gopls to match the log parser in lsp inspector,
see 9aff7a6939/lsp-inspector/src/logParser/rawLogParser.ts (L88)
Change-Id: I3696faf34ba4f0b3d4e205693eaf378941f2f68f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/199517
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Analyzer names are not guaranteed to be unique.
Change-Id: I4d4cc9fa746cbfbea9926f2cae0eb5dfc41027a5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/201217
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
This change makes sure that actionHandles are cached within the
snapshot, to minimize the cost of re-computing action handles on each
run of go/analysis.
Change-Id: If6191c5224285eb207aebb997787ea551a47fbaa
Reviewed-on: https://go-review.googlesource.com/c/tools/+/201098
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
A change in go/types has uncovered a race in go/packages. While we debug,
ignore those tests when running on tip with -race to make the builders
green. This change will be reverted as soon as the issue is fixed.
Updates golang/go#31749
Change-Id: I96f0b30a1bc203a5c36a2ce30c943583b7f8035a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/200819
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
This change moves to the approach of caching the analysis using the
memoize package. This means that we will do less work, as we no longer
need to recompute results that are unchanged. The cache key for an
analysis is simply the key of the CheckPackageHandle, along with the
name of the analyzer.
Change-Id: I0e589ccf088ff1de5670401b7207ffa77a254ceb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/200817
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Some notifications, like exit, have no other arguments, a case the code
was not handling correctly.
Change-Id: Ib5ff536352ba6ad0d09cd80c9d5f0a987abbe500
Reviewed-on: https://go-review.googlesource.com/c/tools/+/200298
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Peter Weinberger <pjw@google.com>
Before this change, we were "saving" config.Env and then appending
to it to create a new slice, like so:
savedEnv := config.Env
...
// for each test case
config.Env = append(savedEnv, additionalValue)
but we're modifying savedEnv during each env. Even though it might
work, it's not doing what we expect. Clean this up.
Change-Id: Idcf8199d836241df2b934308863512c566c0c485
Reviewed-on: https://go-review.googlesource.com/c/tools/+/200769
Run-TryBot: Michael Matloob <matloob@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Modifies the various Subscriber signatures to take in
an "at" time.Time field, which captures the time that
a measurement was made. This field will then be used
when exporting points as their EndTime.
Fixes#34490.
Change-Id: I9e87b65e374876ae3d4df0abedb64bb7dcb221b6
Reviewed-on: https://go-review.googlesource.com/c/tools/+/199577
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Include the context when invoking go/packages.Load so it is
cancelable. Otherwise if the user is manually typing an import or
otherwise messing around with imports, a big queue of potentially very
slow go/packages.Load calls will build up.
Fixesgolang/go#34414.
Change-Id: I80732086b478b908c720739708dd773e81fe2b81
Reviewed-on: https://go-review.googlesource.com/c/tools/+/200058
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
