Added a paragraph and examples explaining when an implementation
may use fused floating-point operations (such as FMA) and how to
prevent operation fusion.
For #17895.
Change-Id: I64c9559fc1097e597525caca420cfa7032d67014
Reviewed-on: https://go-review.googlesource.com/40391
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
While debugging a recent regression it was discovered that
the assembler for ppc64x was not always generating the correct
instruction for DS form loads and stores. When an instruction
is DS form then the offset must be a multiple of 4, and if it
isn't then bits outside the offset field were being incorrectly
set resulting in unexpected and incorrect instructions.
This change adds a check to determine when the opcode is DS form
and then verifies that the offset is a multiple of 4 before
generating the instruction, otherwise logs an error.
This also changes a few asm files that were using unaligned offsets
for DS form loads and stores. In the runtime package these were
instructions intended to cause a crash so using aligned or unaligned
offsets doesn't change that behavior.
Change-Id: Ie3a7e1e65dcc9933b54de7a46a054da8459cb56f
Reviewed-on: https://go-review.googlesource.com/40476
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Avoid the use of constant absolute temp files in tests. This could
produce flaky results, for example on multiuser development machines.
Change-Id: Ia76157a0660fbe294bb31a46ded886cea5deec97
Reviewed-on: https://go-review.googlesource.com/40916
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Some tests need the src/runtime/textflag.h file. Make sure it is
included in iOS test runs.
Change-Id: I5e0e7ebe85679686ef15a7d336f28ac9b68a587a
Reviewed-on: https://go-review.googlesource.com/40915
Run-TryBot: Elias Naur <elias.naur@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The first part of this test tries to confirm that we can't create
a TempFile in a non-existent directory, but does not ensure that
the non-existent directory really does not exist. Instead, let's
create an empty temp directory, and use a non-existent subdir of
that.
Change-Id: I176f14ed5f5a2d7a8c29d8f6949755db69d7dbb6
Reviewed-on: https://go-review.googlesource.com/40914
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Use our own tempdir, to avoid having to Init (and somehow teardown)
Builder. This way we don't leave behind any temp files.
Also, don't create a hardcoded path inside a testcase.
Followup to golang/go#18878.
Fixesgolang/go#19449.
Change-Id: Ieb1ebeab24ae8a74a6fa058d9c23f72b3fc1c444
Reviewed-on: https://go-review.googlesource.com/40912
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The instructions allow moves between floating point and general
purpose registers without any conversion taking place.
Change-Id: I82c6f3ad9c841a83783b5be80dcf5cd538ff49e6
Reviewed-on: https://go-review.googlesource.com/38777
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The linker disables DWARF for these platforms.
Given that, we can spare the compiler some work.
Change-Id: Ic5a6b675150aca199bdc1dd2cdf5eeb4e215bdff
Reviewed-on: https://go-review.googlesource.com/40859
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
They do basically the same work.
Setuintxx was only used in a single place,
so eliminate it in favor of WriteInt.
duintxxLSym's alignment rounding was not used in practice;
change it into alignment assertion.
Passes toolstash-check. No compiler performance changes.
Change-Id: I0f7410cf2ccffbdc02ad796eaf973ee6a83074f8
Reviewed-on: https://go-review.googlesource.com/40863
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Update the route package to git rev 6b27048a.
Introduce the following changes:
- 6b27048 route: drop support for go1.5
- b7fd658 route: fix typo
- 41bba8d route: add support for the manipulation of routing informaion
Updates #19967
Change-Id: Id2bb93df97a45254a2df2b048db0143e3e52bbdf
Reviewed-on: https://go-review.googlesource.com/40830
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
It was added in 2013 in CL 7064048.
All uses of it in the compiler disappeared with
(or possibly before) the SSA backend.
Several releases have gone by without it,
from which I conclude that it is now not needed.
Change-Id: I2095f4ac05d4d7ab998168993a7fd5d954aeee88
Reviewed-on: https://go-review.googlesource.com/40856
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Update the lif package to rev 7bf7a75.
Introduce the following changes:
- 7bf7a75 lif: use of nativeEndian to make API endian agnostic
- adc6ba9 lif: drop support for go1.5
Updates #19967
Change-Id: Iaba893b5ee9af4c54bf5ba4244ce5752ce9f6ad3
Reviewed-on: https://go-review.googlesource.com/40831
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This comment was out of date since the bump to 80 done as the same time
as inlining transitive functions in:
commit 77ccb16eb1
Author: Russ Cox <rsc@golang.org>
Date: Tue Feb 24 12:19:01 2015 -0500
cmd/internal/gc: transitive inlining
Adjust the comment at the top of the file accordingly.
Change-Id: Ia6d7397c874e3b85396e82dc9678e56aab9ad728
Reviewed-on: https://go-review.googlesource.com/40910
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This change delays IP protocol stack-snooping system calls until the
start of connection setup for the better experience with some system
call auditing, such as seccomp on Linux. See #16789 for examples.
Also updates the documentation on favoriteAddrFamily, which is the
owner of stack-snooping system calls.
Fixes#16789.
Change-Id: I4af27bc1ed06ffb1f657b6f6381c328c1f41c66c
Reviewed-on: https://go-review.googlesource.com/40750
Run-TryBot: Mikio Hara <mikioh.mikioh@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL implements the proposal at
https://github.com/golang/proposal/blob/master/design/4899-testing-helper.md.
It's based on Josh's CL 79890043 from a few years ago:
https://codereview.appspot.com/79890043 but makes several changes,
most notably by using the new CallersFrames API so that it works with
mid-stack inlining.
Another detail came up while I was working on this: I didn't want the
user to be able to call t.Helper from inside their TestXxx function
directly (which would mean we'd print a file:line from inside the
testing package itself), so I explicitly prevented this from working.
Fixes#4899.
Change-Id: I37493edcfb63307f950442bbaf993d1589515310
Reviewed-on: https://go-review.googlesource.com/38796
Run-TryBot: Caleb Spare <cespare@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The fixedbugs/issue12536.go file was erroneously deleted just before
committing the patch that fixed the issue (CL 14400).
That's an easy test and there's a small reproducer in the issue, add
it back.
Updates #12536
Change-Id: Ib7b0cd245588299e9a5469e1d75805fd0261ce1a
Reviewed-on: https://go-review.googlesource.com/40712
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Update the poly1305 and curve25519 packages to the current state of /x/crypto.
Updates #19967
Change-Id: Ib71534f78040f31bfd5debb06f3c4a54a77955b3
Reviewed-on: https://go-review.googlesource.com/40711
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Now the runtime/trace tests pass with -l=4.
This also gets rid of the frames cache for multiple reasons:
1) The frames cache was used to avoid repeated calls to funcname and
funcline. Now these calls happen inside the CallersFrames iterator.
2) Maintaining a frames cache is harder: map[uintptr]traceFrame
doesn't work since each PC can map to multiple traceFrames.
3) It's not clear that the cache is important.
Change-Id: I2914ac0b3ba08e39b60149d99a98f9f532b35bbb
Reviewed-on: https://go-review.googlesource.com/40591
Run-TryBot: David Lazar <lazard@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
The argument of the first parameter for connection setup functions on
IP networks must contain a protocol name or number. This change adds
validation for arguments of IP networks to connection setup functions.
Fixes#18185.
Change-Id: I6aaedd7806e3ed1043d4b1c834024f350b99361d
Reviewed-on: https://go-review.googlesource.com/40512
Run-TryBot: Mikio Hara <mikioh.mikioh@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The net package uses various textual representations for network
identifiers and locators on the Internet protocol suite as API.
In fact, the representations are the composition of subset of multple
RFCs: RFC 3986, RFC 4007, RFC 4632, RFC 4291 and RFC 5952.
RFC 4007 describes guidelines for the use of textual representation of
IPv6 addressing/routing scope zone and doesn't prohibit the format for
implementation dependent purposes, as in, specifying a literal IPv6
address and its connected region of routing topology as application
user interface. However, a non-literal IPv6 address, for example, a
host name, with a zone enclosed in square brackets confuses us because
a zone is basically for non-global IPv6 addresses and a pair of square
brackets is used as a set of delimiters between a literal IPv6 address
and a service name or transport port number.
To mitigate such confusion, this change makes JoinHostPort not enclose
non-literal IPv6 addresses in square brackets and SplitHostPort accept
the form "host%zone:port" to recommend that anything enclosed in
square brackets should be a literal IPv6 address.
Before this change:
JoinHostPort("name%zone", "80") = "[name%zone]:80"
JoinHostPort("[::1%zone]", "80") = "[::1%zone]:80"
SplitHostPort("name%zone:80") = "", "", "address name%zone:80: missing brackets in address"
SplitHostPort("[name%zone]:80") = "name%zone", "80", nil
SplitHostPort("[::1%zone]:80") = "::1%zone", "80", nil
After this change:
JoinHostPort("name%zone", "80") = "name%zone:80"
JoinHostPort("[::1%zone]", "80") = "[::1%zone]:80"
SplitHostPort("name%zone:80") = "name%zone", "80", nil
SplitHostPort("[name%zone]:80") = "name%zone", "80", nil // for backwards compatibility
SplitHostPort("[::1%zone]:80") = "::1%zone", "80", nil
Also updates docs and test cases on SplitHostPort and JoinHostPort for
clarification.
Fixes#18059.
Fixes#18060.
Change-Id: I5c3ccce4fa0fbdd58f698fc280635ea4a14d2a37
Reviewed-on: https://go-review.googlesource.com/40510
Run-TryBot: Mikio Hara <mikioh.mikioh@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
all tests currently share the same platform string and fail to
vet expected platforms
Fixes#19958
Change-Id: I2801e1e84958e31975769581e27ea5ca6a0edf5b
Reviewed-on: https://go-review.googlesource.com/40511
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This updates TestGroupCleanup and TestGroupCleanupUserNamespace to pass in the
Alpine builder.
Updates #19938
Change-Id: Iacbfd73782eccd57f872f9e85726c6024529c277
Reviewed-on: https://go-review.googlesource.com/40692
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
On s390x unsigned integer comparisons with immediates require the immediate
to be an unsigned 32-bit integer. The rule was checking that the immediate
was a signed 32-bit integer.
This CL also adds a test for comparisons that could be turned into compare
with immediate or equivalent instructions (depending on architecture and
optimizations applied).
Fixes#19940.
Change-Id: Ifd6aa989fd3d50e282f7d30fec9db462c28422b1
Reviewed-on: https://go-review.googlesource.com/40433
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This extends the sweeper to free workbufs back to the heap between GC
cycles, allowing this memory to be reused for GC'd allocations or
eventually returned to the OS.
This helps for applications that have high peak heap usage relative to
their regular heap usage (for example, a high-memory initialization
phase). Workbuf memory is roughly proportional to heap size and since
we currently never free workbufs, it's proportional to *peak* heap
size. By freeing workbufs, we can release and reuse this memory for
other purposes when the heap shrinks.
This is somewhat complicated because this costs ~1–2 µs per workbuf
span, so for large heaps it's too expensive to just do synchronously
after mark termination between starting the world and dropping the
worldsema. Hence, we do it asynchronously in the sweeper. This adds a
list of "free" workbuf spans that can be returned to the heap. GC
moves all workbuf spans to this list after mark termination and the
background sweeper drains this list back to the heap. If the sweeper
doesn't finish, that's fine, since getempty can directly reuse any
remaining spans to allocate more workbufs.
Performance impact is negligible. On the x/benchmarks, this reduces
GC-bytes-from-system by 6–11%.
Fixes#19325.
Change-Id: Icb92da2196f0c39ee984faf92d52f29fd9ded7a8
Reviewed-on: https://go-review.googlesource.com/38582
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently the runtime allocates workbufs from persistent memory, which
means they can never be freed.
Switch to allocating them from manually-managed heap spans. This
doesn't free them yet, but it puts us in a position to do so.
For #19325.
Change-Id: I94b2512a2f2bbbb456cd9347761b9412e80d2da9
Reviewed-on: https://go-review.googlesource.com/38581
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
This introduces a new type, *gcBits, to use for alloc/mark bitmap
allocations instead of *uint8. This type is marked go:notinheap, so
uses of it correctly eliminate write barriers. Since we now have a
type, this also extracts some common operations to methods both for
convenience and to avoid (*uint8) casts at most use sites.
For #19325.
Change-Id: Id51f734fb2e96b8b7715caa348c8dcd4aef0696a
Reviewed-on: https://go-review.googlesource.com/38580
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
This clarifies that the gcBits type is actually an arena of gcBits and
will let us introduce a new gcBits type representing a single
mark/alloc bitmap allocated from the arena.
For #19325.
Change-Id: Idedf76d202d9174a17c61bcca9d5539e042e2445
Reviewed-on: https://go-review.googlesource.com/38579
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently, manually-managed spans are included in memstats.heap_inuse
and memstats.heap_sys, but when we export these stats to the user, we
subtract out how much has been allocated for stack spans from both.
This works for now because stacks are the only manually-managed spans
we have.
However, we're about to use manually-managed spans for more things
that don't necessarily have obvious stats we can use to adjust the
user-presented numbers. Prepare for this by changing the accounting so
manually-managed spans don't count toward heap_inuse or heap_sys. This
makes these fields align with the fields presented to the user and
means we don't have to track more statistics just so we can adjust
these statistics.
For #19325.
Change-Id: I5cb35527fd65587ff23339276ba2c3969e2ad98f
Reviewed-on: https://go-review.googlesource.com/38577
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Rick Hudson <rlh@golang.org>
We're going to start using manually-managed spans for GC workbufs, so
rename the allocate/free methods and pass in a pointer to the stats to
use instead of using the stack stats directly.
For #19325.
Change-Id: I37df0147ae5a8e1f3cb37d59c8e57a1fcc6f2980
Reviewed-on: https://go-review.googlesource.com/38576
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Rick Hudson <rlh@golang.org>
We're going to use this free list for other types of manually-managed
memory in the heap.
For #19325.
Change-Id: Ib7e682295133eabfddf3a84f44db43d937bfdd9c
Reviewed-on: https://go-review.googlesource.com/38575
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
We're about to generalize _MSpanStack to be used for other forms of
in-heap manual memory management in the runtime. This is an automated
rename of _MSpanStack to _MSpanManual plus some comment fix-ups.
For #19325.
Change-Id: I1e20a57bb3b87a0d324382f92a3e294ffc767395
Reviewed-on: https://go-review.googlesource.com/38574
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
This avoids needing a mutex to protect stringsym,
and preserves a consistent ctxt.Data ordering
in the face of a concurrent backend.
Updates #15756
Change-Id: I775daae11db5db1269533a00f5249e3a03086ffc
Reviewed-on: https://go-review.googlesource.com/40509
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
In my experience, this usually happens when vet panics.
Dumping all unparseable lines should help diagnosis.
Inspired by the trybot failures in CL 40511.
Change-Id: Ib73e8c8b2942832589c3cc5d33ef35fdafe9965a
Reviewed-on: https://go-review.googlesource.com/40508
Reviewed-by: Rob Pike <r@golang.org>
