I made the default be that, where there are differences between types2
and -G=0 error messages, we want errorcheck tests to pass types2.
Typically, we can get errorcheck to pass on types2 and -G=0 if they give
the same number of error messages on the same lines, just different
wording. If they give a different number of error messages, then I made
types2 pass. I added an exception list for -G=0 to cover those cases
where -G=0 and types give different numbers of error messages.
Because types2 does not run if there are syntax errors, for several
tests, I had to split the tests into two parts in order to get all the
indicated errors to be reported in types2 (bug228.go, bug388.go,
issue11610.go, issue14520.go)
I tried to preserve the GCCGO labeling correctly (but may have gotten
some wrong). When types2 now matches where a GCCGO error previously
occurred, I transformed GCCGO_ERROR -> ERROR. When types2 no longer
reports an error in a certain place, I transformed ERROR -> GCCGO_ERROR.
When types2 reports an error in a new place, I used GC_ERROR.
The remaining entries in types2Failures are things that I think we
probably still need to fix - either actually missing errors in types2,
or cases where types2 gives worse errors than -G=0.
Change-Id: I7f01e82b322b16094096b67d7ed2bb39b410c34f
Reviewed-on: https://go-review.googlesource.com/c/go/+/372854
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Follow-up on comment in CL 376914.
Also:
- add missing check != nil test in assignableTo
- use check.sprintf rather than fmt.Sprintf in missingMethodReason
For #48312.
Change-Id: Ie209b4101a7f2c279e42a59987d0068079c8b69f
Reviewed-on: https://go-review.googlesource.com/c/go/+/377375
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Fixes#50516.
Also call DefPredeclaredTestFuncs in TestFixedbugs so it can be
run independently again.
Change-Id: I78d4cc11790b1543a2545a7ab297a223b3d5e3c8
Reviewed-on: https://go-review.googlesource.com/c/go/+/376954
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
- detect *interface case and report specific error
- replaced switch with sequence of if's for more clarity
- fixed isInterfacePtr: it applies to all interfaces, incl.
type parameters
- reviewed/fixed all uses of isInterfacePtr
- adjusted error messages to be consistently of the format
"type %s is pointer to interface, not interface"
Fixes#48312.
Change-Id: Ic3c8cfcf93ad57ecdb60f6a727cce9e1aa4afb5d
Reviewed-on: https://go-review.googlesource.com/c/go/+/376914
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Only snapshot/reset coverage counters when we are actually fuzzing.
This prevents a race when running corpus/seed values during the testing
phase.
Fixes#50488
Change-Id: I7dd5a0353a296c0b13eede29ad9af7c78814fa2d
Reviewed-on: https://go-review.googlesource.com/c/go/+/376554
Trust: Katie Hockman <katie@golang.org>
Reviewed-by: Katie Hockman <katie@golang.org>
Trust: Roland Shoemaker <roland@golang.org>
Run-TryBot: Roland Shoemaker <roland@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Added a test to make sure that the private methods of a local generic
type are properly exported, if there is a global variable with that
type.
Added comments in crawler.go, to give more detail and to give more about
the overall purpose.
Fixed one place where t.isFullyInstantiated() should be replaced by
isPtrFullyInstantiated(t), so that we catch pointers to generic types
that may be used as a method receiver.
Change-Id: I9c42d14eb6ebe14d249df7c8fa39e889f7cd3f22
Reviewed-on: https://go-review.googlesource.com/c/go/+/374754
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Using type aliases, it's possible to create structs with embedded
fields that have no corresponding type literal notation. However, we
still need to generate a unique name for these types to use for linker
symbols. This CL introduces a new "struct{ Name = Type }" syntax for
use in LinkString formatting to represent these types.
Fixes#50190.
Change-Id: I025ceb09a86e00b7583d3b9885d612f5d6cb44fe
Reviewed-on: https://go-review.googlesource.com/c/go/+/372914
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Trust: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
The failure mode in #37794 does not match the failure mode described
in #18784. However, since the test is currently skipped on all other
MIPS variants, it may be that they suffer from the same underlying GDB
bug. Ideally one of the Go MIPS maintainers should file an upstream
bug and remove the skip once it is fixed; in the meantime, there is no
point in continuing to let the test fail on just one of the four MIPS
variants.
For #37794
Change-Id: I570f51cc04cbb7ef1ed7efd526e26886af53bfb6
Reviewed-on: https://go-review.googlesource.com/c/go/+/376654
Trust: Bryan Mills <bcmills@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Finally figured out how to deal with the interaction between generics
and inlining. The problem has been: what to do if you inline a function
that uses a new instantiated type that hasn't been seen in the current
package? This might mean that you need to do another round of
function/method instantiatiations after inlining, which might lead to
more inlining, etc. (which is what we currently do, but it's not clear
when you can stop the inlining/instantiation loop).
We had thought that one solution was to export instantiated types (even
if not marked as exportable) if they are referenced in exported
inlineable functions. But that was quite complex and required changing
the export format. But I realized that we really only need to make sure
the relevant dictionaries and shape instantiations for the instantiated
types are exported, not the instantiated type itself and its wrappers.
The instantiated type is naturally created as needed, and the wrappers
are generated automatically while writing out run-time type (making use
of the exported dictionaries and shape instantiations).
So, we just have to make sure that those dictionaries and shape
instantiations are exported, and then they will be available without any
extra round of instantiations after inlining. We now do this in
crawler.go. This is especially needed when the instantiated type is only
put in an interface, so relevant dictionaries/shape instantiations are
not directly referenced and therefore exported, but are still needed for
the itab.
This fix avoids the phase ordering problem where we might have to keep
creating new type instantiations and instantiated methods after each
round of inlining we do.
Removed the extra round of instantiation/inlining that were added in the
previous fix. The existing tests
test/typeparam{geninline.go,structinit.go} already test this situation
of inlining a function referencing a new instantiated type.
Added the original example from issue 50121 as test (has 5 packages),
since it found a problem with this code that the current simpler test
for 50121 did not find.
Change-Id: Iac5d0dddf4be19376f6de36ee20a83f0d8f213b5
Reviewed-on: https://go-review.googlesource.com/c/go/+/375494
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Currently TestCPUProfileMultithreadMagnitude runs two CPU consumption
functions in a single profile and then analyzes the results as separate
subtests.
This works fine, but when debugging failures it makes manual analysis of
the profile dump a bit annoying.
Refactor the test to collect separate profiles for each subtest for
easier future analysis.
For #50097.
For #50232.
Change-Id: Ia1c8bb86aaaf652e64c5e660dcc2da47d2194c2b
Reviewed-on: https://go-review.googlesource.com/c/go/+/372800
Trust: Michael Pratt <mpratt@google.com>
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Rhys Hiltner <rhys@justin.tv>
Reviewed-by: Bryan Mills <bcmills@google.com>
When an http.FileServer is given a path like file1/file2 where file1
exists but file2 does not, the proper HTTP status should be
NotFound. Some OSes return a "not a directory" error instead, so this
must be mapped to NotFound.
That mapping was already being done for the Dir FileSystem
implementation, as discussed in #18984. But it wasn't for the
FS implementation.
This CL does the same mapping for FS, by generalizing the function
that did it for Dir.
Fixes#49552
Change-Id: I61d6aa8ef101158e9674707d44e653f5dedbd040
Reviewed-on: https://go-review.googlesource.com/c/go/+/376874
Trust: Jonathan Amsterdam <jba@google.com>
Run-TryBot: Jonathan Amsterdam <jba@google.com>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Upgrade the test certificate from RSA 1024 (not FIPS-approved)
to RSA 2048 (FIPS-approved), allowing tests to pass when
the dev.boringcrypto branch FIPS-only mode is enabled.
Fixes#48674.
Change-Id: I613d2f8d0207bf3683fd0df256bf0167604996c5
Reviewed-on: https://go-review.googlesource.com/c/go/+/353869
Trust: Damien Neil <dneil@google.com>
Run-TryBot: Damien Neil <dneil@google.com>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
The VDSO (__kernel_vsyscall) is reachable via
asmcgocall(cgo_start_thread) on linux-386, which causes traceback to
throw.
Fixes#49182.
For #50504.
Change-Id: Idb78cb8de752203ce0ed63c2dbd2d12847338688
Reviewed-on: https://go-review.googlesource.com/c/go/+/376656
Reviewed-by: Cherry Mui <cherryyz@google.com>
Trust: Michael Pratt <mpratt@google.com>
Run-TryBot: Michael Pratt <mpratt@google.com>
Similarly to what we do for the built-in function `copy`,
where we allow a string as 2nd argument to append, also
permit a type parameter constrained by string|[]byte.
While at it, change date in the manual.go2 test files so
that we don't need to constantly correct it when copying
a test case from that file into a proper test file.
Fixes#50281.
Change-Id: I23fed66736aa07bb3c481fe97313e828425ac448
Reviewed-on: https://go-review.googlesource.com/c/go/+/376214
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
ReadDirent returns only as many directory entries as will fit in the
buffer, and each entry is variable-length — so we have no guarantee in
general that a buffer of a given arbitrary size can hold even one
entry, let alone all ten entries expected by the test.
Instead, iterate calls to ReadDirent until one of the calls returns
zero entries and no error, indicating that the directory has been read
to completion.
Fixes#37323
Change-Id: I7f1cedde7666107256604e4ea1ac13c71f22151a
Reviewed-on: https://go-review.googlesource.com/c/go/+/376334
Trust: Bryan Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
types2 allows the conversion of a slice of a user-defined byte type B
(not builtin uint8 or byte) to string. But runtime.slicebytetostring
requires a []byte argument, so add in a CONVNOP from []B to []byte if
needed. Same for the conversion of a slice of user-defined rune types to
string.
I made the same change in the transformations of the old typechecker, so
as to keep tcConv() and transformConv() in sync. That fixes the bug for
-G=0 mode as well.
Fixes#23536
Change-Id: Ic79364427f27489187f3f8015bdfbf0769a70d69
Reviewed-on: https://go-review.googlesource.com/c/go/+/376056
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
For #47694.
Change-Id: I00862f987a0ff9f71e0295ce4320e6f9a6a4332f
Reviewed-on: https://go-review.googlesource.com/c/go/+/376414
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 352870 added extra phase for instantiation after inlining, to take
care of the new fully-instantiated types. However, when fetching inlined
body of these types's methods, we need to allow OADDR operations on
untyped expressions, the same as what main inlining phase does.
The problem does not show up, until CL 371554, which made the compiler
do not re-typecheck while importing, thus leaving a OXDOT node to be
marked as address taken when it's not safe to do that.
Fixes#50437
Change-Id: I20076b872182c520075a4f8b84230f5bcb05b341
Reviewed-on: https://go-review.googlesource.com/c/go/+/375574
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Since a SECURITY.md file is present in the main Go repository,
GitHub already shows a "Report a security vulnerability" link
in the issue template list. Remove the duplicate custom link.
Fixes#49962.
Change-Id: Ifdf7e93b76ebd9258d907aa9cb4915c0dbc4f93e
Reviewed-on: https://go-review.googlesource.com/c/go/+/376357
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Julie Qiu <julie@golang.org>
Problem pointed out on golang-nuts mailing list.
Change-Id: If1c9b22e1ed7b4ec7ebcaadc80fa450333e6856c
Reviewed-on: https://go-review.googlesource.com/c/go/+/375799
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The release notes explicitly refer to sections updated
for generics in the spec but then point to the old spec
which is very confusing for beta users.
For #47694
Change-Id: I5b555db3543cc32f088a8b267ec3f1195a52a812
Reviewed-on: https://go-review.googlesource.com/c/go/+/373174
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For #50317.
Change-Id: I24ccf333c380283a36b573ef8fc3e7fcd71bd17f
Reviewed-on: https://go-review.googlesource.com/c/go/+/376215
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Trust: Dan Scales <danscales@google.com>
Rat maintains the invariant that x.b.neg is always false,
but Rat.Denom was writing x.b.neg = false itself too.
That makes Rat.Denom a writing operation, when it should
be a read-only operation. That in turn makes it unsafe to
use from multiple goroutines, which is highly unexpected.
Make it read-only and therefore race-free again.
Fixes#50473.
Change-Id: I97b87913954511e5200c0665d16b9ed63422e505
Reviewed-on: https://go-review.googlesource.com/c/go/+/375935
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Work-around for #50481: report an error for multiple
blank type parameters. It's always possible to use
non-blank names in those cases.
We expect to lift this restriction for 1.19.
For #50481.
Change-Id: Ifdd2d91340aac1da3387f7d80d46e44f5997c2a8
Reviewed-on: https://go-review.googlesource.com/c/go/+/376058
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Move switch to enable method type parameters entirely
to the parser, by adding the mode AllowMethodTypeParams.
Ensure that the error messages are consistent.
Remove unnecessary code in the type checker.
Fixes#50317.
Change-Id: I4f3958722400bdb919efa4c494b85cf62f4002bb
Reviewed-on: https://go-review.googlesource.com/c/go/+/376054
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The c.startParallel channel on the testContext is stuck
in t.Parallel() because c.running starts at 1 for the main
fuzz parent test, and is causing a deadlock because it is
never released. It would normally be released by tRunner,
but needs to instead be released by fRunner instead for fuzz
tests.
Fixes#50217
Change-Id: I2d010e9adddfd8e8321ff2f9dd2e43daf46c128f
Reviewed-on: https://go-review.googlesource.com/c/go/+/374054
Reviewed-by: Roland Shoemaker <roland@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Trust: Katie Hockman <katie@golang.org>
Run-TryBot: Katie Hockman <katie@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
This change implements field the access p.f where the type of p
is a type parameter with a structural constraint that is a struct
with a field f. This is only the fix for the type checker. The
compiler will need a separate CL.
This makes the behavior consistent with the fact that we can
write struct composite literals for type parameters with a
struct structural type.
For #50417.
For #50233.
Change-Id: I87d07e016f97cbf19c45cde19165eae3ec0bad2b
Reviewed-on: https://go-review.googlesource.com/c/go/+/375795
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
The underlying type of a type parameter is an interface,
so we don't need a special case for type parameters anymore.
Simply share the (identical) code for interfaces.
Adjust code in types.NewMethodSet accordingly.
No functional difference.
Preparation for fix of issues below.
For #50233.
For #50417.
Change-Id: Ib2deadd12f89e6918dec224b4ce35583001c3101
Reviewed-on: https://go-review.googlesource.com/c/go/+/375514
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Do this by running verification for instantiated signatures
later, after the delayed type parameter set-up had a chance
to wrap type bounds in implicit interfaces where needed.
Fixes#50450
Change-Id: If3ff7dc0be6af14af854830bfddb81112ac575cb
Reviewed-on: https://go-review.googlesource.com/c/go/+/375737
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This test is observed to be flaky on the plan9-arm builder.
Skip it on that platform until it can be diagnosed and fixed.
For #50470
Change-Id: If626af426d856c377e00ac5baaca52899456556e
Reviewed-on: https://go-review.googlesource.com/c/go/+/375934
Trust: Bryan Mills <bcmills@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For #50439
Change-Id: Ifad6e6f8de42121c695b5a4dc56e0f6606e2917e
Reviewed-on: https://go-review.googlesource.com/c/go/+/375796
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Trust: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
As a result of the change to the underlying of a type parameter to be
its constraint interface, we had couple inaccuracies that combined to
cause an infinite recursion when type checking the invalid type
parameter list [A A].
- We deferred tpar.iface() using check.later twice: once in
newTypeParam, and then again at the end of collectTypeParams.
- We deferred the check that type parameter constraints are not type
parameters, even though this is unnecessary: the constraint type is
known.
With these inaccuracies, tpar.iface() was executing before our guard
against using type parameters as constraints, causing an infinite
recursion through under().
Fix this by eagerly checking whether the constraint is a type
parameter, and marking it invalid if so. Also remove the unnecessary
calls to tpar.iface() at the end of collectTypeParams, as this will
already have been scheduled by newTypeParam.
Fixes#50321
Change-Id: I4eecbecf21656615867cb94be65b520e9e795bd1
Reviewed-on: https://go-review.googlesource.com/c/go/+/374294
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The arbitrary sleep in this test is empirically not always long enough
on slower builders. However, we know the exact number of connections
that should be dialed: we can wait on that number in the dial hook
instead.
Fixes#34495
Change-Id: I538244ceb75a80271a724304b993309482bd5b41
Reviewed-on: https://go-review.googlesource.com/c/go/+/375694
Trust: Bryan Mills <bcmills@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Instead of exiting with status 16962 when we fail to call SYS_setcontext
in sigreturn, reference a null pointer and crash. Hopefully, this will
enable grabbing a core dump to debug.
Updates #42422
Change-Id: If02c14a0a37084351f3f00db3dc9766cb68ae4b8
Reviewed-on: https://go-review.googlesource.com/c/go/+/375834
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Trust: Benny Siegert <bsiegert@gmail.com>
The change clarifies in the release notes for go1.18 that the variable
is for compilation and references the microarchitecture description in
the Go Wiki,
https://golang.org/wiki/MinimumRequirements#amd64,
and references the same information in the output of go help
environment.
Fixes#50174
Change-Id: I6a7d5a06f48463a810c96cc9c76fe66113d5147c
Reviewed-on: https://go-review.googlesource.com/c/go/+/372194
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
These tests are empirically flaky on the windows/arm and windows/arm64
builders, with a consistent (but rare) failure mode.
This change skips the test if that particular failure mode is
encountered on those platforms; the skip can be removed if and when
someone has the time to pin down the root cause.
For #43120
Change-Id: Ie3a9a06bf47e3a907c7b07441acc1494a4631135
Reviewed-on: https://go-review.googlesource.com/c/go/+/375635
Trust: Bryan Mills <bcmills@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
Reviewed-by: Damien Neil <dneil@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The function asmsyscall6 must follow AIX stack layout. It means
that its first local variable must be stored after its arguments
area, ie after offset 112.
Fixes#50185
Change-Id: I897731ddd2a9faad8218443a4c2f4b204ad7e173
Reviewed-on: https://go-review.googlesource.com/c/go/+/373074
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
The asan runtime functions may run on stacks that cannot grow, and
they do not have large local variables, so it is safe to mark them
as NOSPLIT.
Add test case.
Fixes#50391
Change-Id: Iadcbf1ae0c837d9b64da5be208c7f424e6ba11de
Reviewed-on: https://go-review.googlesource.com/c/go/+/374398
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
Trust: Fannie Zhang <Fannie.Zhang@arm.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
The code looks like it was already trying to avoid this but missed a
spot.
Fixes#50271.
Change-Id: I450adac3f618b9535b61a28e6a160eacc351d47c
Reviewed-on: https://go-review.googlesource.com/c/go/+/373075
Trust: Jason Donenfeld <Jason@zx2c4.com>
Run-TryBot: Jason Donenfeld <Jason@zx2c4.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
In the dict info, we need to save the SelectorExpr of a generic method
call when making its sub-dictionary entry. The generic method call will
eventually be transformed into a function call on the method shape
instantiation, so we may not always have the selector info available
when we need it to create a dictionary. We use this SelectorExpr as
needed if the relevant call node has already been transformed.
Similarly, we save the InstExpr of generic function calls, since the
InstExpr will be dropped when the function call is transformed to a call
to a shape instantiation. We use this InstExpr if the relevant function
call has already been transformed.
Added an extra generic function Some2 and a call to it from Some that
exercises the generic function case. The existing test already tests the
method call case.
Fixes#50264
Change-Id: I2c7c7d79a8e33ca36a5e88e64e913c57500c97f9
Reviewed-on: https://go-review.googlesource.com/c/go/+/373754
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Since we use existing instantiations from the symbol table when possible
(to make sure each instantiation is unique), we need to pop
instantiations of local types when leaving the containing scope.
g.stmts() now pushes and pops scope, and we do a Pushdcl() in g.typ0()
when creating an instantiation of a local type.
Non-instantiated local types (generic or not) are translated directly
from types2, so they don't need to be pushed/popped. We don't export
function bodies with local types, so there is no issue during import.
We still don't support local types in generic functions/methods.
Fixes#50177
Change-Id: If2d2fe71aec003d13f0338565c7a0da2c9580a14
Reviewed-on: https://go-review.googlesource.com/c/go/+/372654
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
A receiver expression for a type with parameters may be an IndexExpr
or IndexListExpr in addition to an Ident or StarExpr. Add cases to
recvString to account for the new types.
Add tests that compare the fields of Func, and the fields of Type that
hold Funcs. These fields weren't previously tested.
Change-Id: Ia2cef51c85113422e0c5745c77dddcd53507ee51
Reviewed-on: https://go-review.googlesource.com/c/go/+/375095
Trust: Jonathan Amsterdam <jba@google.com>
Run-TryBot: Jonathan Amsterdam <jba@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
