In workspace mode, if a user lists a package or patternthat's inside a
module that's not listed in go.work, mention that the package or pattern
is outside the modules listed in go.work so the user has a better idea
of how to fix the issue.
(Question: it's valid in those flows to add a pattern that points into
the module cache. Should we expand the error to say "package outside
modules listed in go.work file or contained in module cache"? That seems
clunky (and is the uncommon case) which is why I didn't do so in this
case, but it's possible)
Fixes#49632
Change-Id: I3f0ea1b2f566d52a8079b58593fcc5cc095e7a41
Reviewed-on: https://go-review.googlesource.com/c/go/+/384236
Trust: Michael Matloob <matloob@golang.org>
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
If something goes horribly wrong with the assumptions surrounding a
piController, its internal error state might accumulate in an unbounded
manner. In practice this means unexpected Inf and NaN values.
Avoid this by identifying cases where the error overflows and resetting
controller state.
In the scavenger, this case is much more likely. All that has to happen
is the proportional relationship between sleep time and estimated CPU
usage has to break down. Unfortunately because we're just measuring
monotonic time for all this, there are lots of ways it could happen,
especially in an oversubscribed system. In these cases, just fall back
on a conservative pace for scavenging and try to wait out the issue.
In the pacer I'm pretty sure this is impossible. Because we wire the
output of the controller to the input, the response is very directly
correlated, so it's impossible for the controller's core assumption to
break down.
While we're in the pacer, add more detail about why that controller is
even there, as well as its purpose.
Finally, let's be proactive about other sources of overflow, namely
overflow from a very large input value. This change adds a check after
the first few operations to detect overflow issues from the input,
specifically the multiplication.
No tests for the pacer because I was unable to actually break the
pacer's controller under a fuzzer, and no tests for the scavenger because
it is not really in a testable state.
However:
* This change includes a fuzz test for the piController.
* I broke out the scavenger code locally and fuzz tested it, confirming
that the patch eliminates the original failure mode.
* I tested that on a local heap-spike test, the scavenger continues
operating as expected under normal conditions.
Fixes#51061.
Change-Id: I02a01d2dbf0eb9d2a8a8e7274d4165c2b6a3415a
Reviewed-on: https://go-review.googlesource.com/c/go/+/383954
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The "block" helpers in TestBlockProfile previously slept for an
arbitrary duration and assumed that that duration was long enough for
the parent goroutine to have registered as blocking. However —
especially on slow or overloaded builders — the current arbitrary
duration is sometimes not quite long enough.
Rather than increasing the duration to a different arbitrary value
(which would make the test slower but not actually eliminate the
possibility of flakes!), we can use the runtime's own accounting to
detect when the goroutine is actually blocked: we obtain a goroutine
dump from the runtime, and assume that blocking has been registered in
the profile only if the runtime shows the test goroutine in the
appropriate blocked state.
That not only makes the test more reliable, but also makes it
significantly lower-latency when run on a fast machine.
Fixes#6999Fixes#37844
Change-Id: I465ed2afd406fd2b621419e1f06925f283525f25
Reviewed-on: https://go-review.googlesource.com/c/go/+/384534
Trust: Bryan Mills <bcmills@google.com>
Trust: Benny Siegert <bsiegert@gmail.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The regexp code assumes it can recurse over the structure of
a regexp safely. Go's growable stacks make that reasonable
for all plausible regexps, but implausible ones can reach the
“infinite recursion?” stack limit.
This CL limits the depth of any parsed regexp to 1000.
That is, the depth of the parse tree is required to be ≤ 1000.
Regexps that require deeper parse trees will return ErrInternalError.
A future CL will change the error to ErrInvalidDepth,
but using ErrInternalError for now avoids introducing new API
in point releases when this is backported.
Fixes#51112.
Change-Id: I97d2cd82195946eb43a4ea8561f5b95f91fb14c5
Reviewed-on: https://go-review.googlesource.com/c/go/+/384616
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
These TODOs were originally removed in CL 368794.
Updates #47694
Change-Id: I39d5c0ce5f96adbbc466585a5831f721057dbed5
Reviewed-on: https://go-review.googlesource.com/c/go/+/384619
Trust: Carlos Amedee <carlos@golang.org>
Run-TryBot: Carlos Amedee <carlos@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
There was an off-by-one error in the time histogram buckets calculation
that caused the linear sub-buckets distances to be off by 2x.
The fix was trivial, but in writing tests I realized there was a much
simpler way to express the calculation for the histogram buckets, and
took the opportunity to do that here. The new bucket calculation also
fixes the bug.
Fixes#50732.
Change-Id: Idae89986de1c415ee4e148f778e0e101ca003ade
Reviewed-on: https://go-review.googlesource.com/c/go/+/380094
Reviewed-by: Michael Pratt <mpratt@google.com>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
This is a pure rename of the respective Go functions/methods
with corresponding adjustments to error messages and tests.
A couple of comments were manually rephrased.
With this change, the implementation and error messages match
the latest spec.
No functionality change.
Change-Id: Iaa92a08b64756356fb2c5abdaca5c943c9105c96
Reviewed-on: https://go-review.googlesource.com/c/go/+/384618
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
The latter is subject to kern.maxfilelimit restrictions on darwin which
are not reflected in the return value. This makes it difficult to
reliably restore the default after the test is complete. RLIMIT_CPU
should hopefully sidestep this problem.
Updates #40564.
Change-Id: Ifb33c7d46f2708130cef366dc245c643a2d5e465
Reviewed-on: https://go-review.googlesource.com/c/go/+/383234
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Trust: Bryan Mills <bcmills@google.com>
For #49735.
Change-Id: Ib7343061dca0e8d848e0719d39be0393d7cfad93
Reviewed-on: https://go-review.googlesource.com/c/go/+/384615
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Fixes#51110.
Change-Id: I11370417f1ef435b05dfab18eeabc2c3c1b7b8a1
Reviewed-on: https://go-review.googlesource.com/c/go/+/384674
Trust: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Add corresponding rules and a couple of examples.
Fixes#50202.
Change-Id: I4287b5e2d0fd29a0c871795e07f1bb529c9c6004
Reviewed-on: https://go-review.googlesource.com/c/go/+/384240
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change in terminology prevents potential confusion
that migth be caused by associating "structural type"
with "structural typing"; the two are not connected.
Also, adjusted introductory paragraph of section on
constraint type inference: type inference goes in both
directions, from type parameter to core type and vice
versa. The previous description was not quite accurate.
Change-Id: If4ca300f525eea660f68486302619aa6ad5dbc2c
Reviewed-on: https://go-review.googlesource.com/c/go/+/384238
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
AES-196 does not exist, but AES-192 does.
Signed-off-by: Eric Lagergren <eric@ericlagergren.com>
Change-Id: I8c9ac67735e99e5b2ee7fb9824029c1164221153
Reviewed-on: https://go-review.googlesource.com/c/go/+/384374
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Cherry Mui <cherryyz@google.com>
For #47694.
Change-Id: I5f6850e171f574a5342671778df854dc68a5148f
Reviewed-on: https://go-review.googlesource.com/c/go/+/384554
Trust: Carlos Amedee <carlos@golang.org>
Run-TryBot: Carlos Amedee <carlos@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Alex Rakoczy <alex@golang.org>
Trust: Alex Rakoczy <alex@golang.org>
Run-TryBot: Alex Rakoczy <alex@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
If the actual DNS lookup in LookupIPAddr completes quickly enough,
it may succeed even if the passed-in Context is already canceled.
That would (rarely) cause TestLookupContextCancel to fail due to an
unexpectedly-nil error.
This change uses the existing testHookLookupIP hook to delay the
cancellation until the lookup has started (to try to provoke the code
path for which the test was added), and then block the lookup result
until LookupIPAddr has noticed it.
Fixes#51084
Updates #22724
Change-Id: I331ac61a652ac88f6d4c85bf62466237b76d53ed
Reviewed-on: https://go-review.googlesource.com/c/go/+/384237
Trust: Bryan Mills <bcmills@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Since a String method cannot return an error, escape fields that may
contain unsanitized values, and unescape them during parsing.
Add a fuzz test to verify that calling the String method on any
BuildInfo returned by Parse produces a string that parses to the same
BuildInfo. (Note that this doesn't ensure that String always produces
a parseable input: we assume that a user constructing a BuildInfo
provides valid paths and versions, so we don't bother to escape those.
It also doesn't ensure that ParseBuildInfo accepts all inputs that
ought to be valid.)
Fixes#51026
Change-Id: Ida18010ce47622cfedb1494060f32bd7705df014
Reviewed-on: https://go-review.googlesource.com/c/go/+/384154
Trust: Bryan Mills <bcmills@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Issue #43130 shows flaky hash not inbalanced on 386 platform,
which is using AES hashing instead of wyhash.
This CL increase the scramble times to 3 that amd64 using right now.
Fixes#43130
Change-Id: I9d012eda99ff71c13a89448f46fcb9c5e7cec921
Reviewed-on: https://go-review.googlesource.com/c/go/+/384075
Trust: mzh <mzh@golangcn.org>
Run-TryBot: mzh <mzh@golangcn.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
CL 383554 disables testing cgo internal linking on all ARM64 but
Windows, because it doesn't work with newer GCC. But
- darwin-arm64 works, and it does not use GCC
- we don't support cgo internal linking on windows-arm64 anyway.
This CL fixes the condition.
Change-Id: I9eb7b81ef75e482f5e95d2edae4863ba21396432
Reviewed-on: https://go-review.googlesource.com/c/go/+/384269
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Looking at history, it appears to never have worked as documented.
Fixes#48759
Change-Id: I066307c28e3ed1875c1c4049bade62e2818dd400
Reviewed-on: https://go-review.googlesource.com/c/go/+/383998
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Cherry Mui <cherryyz@google.com>
Provides example using value for the perm argument that matches the value set by the mkdir command on MacOS and Linux.
Change-Id: I98d9ac9668de4dc0efde2484f5b00d005628ac9e
GitHub-Last-Rev: 44e617912f
GitHub-Pull-Request: golang/go#50641
Reviewed-on: https://go-review.googlesource.com/c/go/+/378874
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Cherry Mui <cherryyz@google.com>
Document that AssertableTo is undefined (at least for 1.18) if
the first argument is a generalized interface; i.e., an interface
that may only be used as a constraint in Go code.
Still, implement it as we might expect it to be defined in the
future, to prevent problems down the road due to Hyrum's Law.
While at it, also removed the internal flag forceStrict and its
one use in Checker.assertableTo; forceStrict was never enabled
and if it would have been enabled, the behavior would not have
been correct.
Change-Id: Ie4dc9345c88d04c9640f881132154a002db22643
Reviewed-on: https://go-review.googlesource.com/c/go/+/383917
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
CL 337350 changed mp.fastrand from a [2]uint32 to a uint64 and changed
the initialization to a single call of int64Hash. However, int64Hash
returns uintptr, so 32-bit systems this always left the most
significant 32 bits of mp.fastrand initialized to 0. The new code also
did not protect against initializing mp.fastrand to 0, which on a
system that does not implement math.Mul64 (most 32-bit systems) would
lead fastrand to always return 0.
This CL restores the mp.fastrand initialization to what it was before
CL 337350, adjusted for the change from [2]uint32 to uint64.
Change-Id: I663b415d9424d967e8e665ce2d017604dcd5b204
Reviewed-on: https://go-review.googlesource.com/c/go/+/383916
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
For #46336
Change-Id: Idc23302085e14e24d571f5995d6d33ca964a0021
Reviewed-on: https://go-review.googlesource.com/c/go/+/382954
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The terms "integer type", "floating-point type", and "complex type"
are used frequently in the spec but are not explicitly (only indirectly)
defined.
Slightly rephrased the section on numeric types and introduce these
terms explicitly. Add links to this section.
Change-Id: I3fb888933bece047da8b356b684c855618e9aee4
Reviewed-on: https://go-review.googlesource.com/c/go/+/384157
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes#51083
Change-Id: Ic9207ae4104b06749925186e0eb4f18edf1b5007
Reviewed-on: https://go-review.googlesource.com/c/go/+/384235
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
TestGdbBacktrace occasionally fails due to a GDB internal error.
We have observed the error on various linux builders since at least
October 2020, and it has been reported upstream at least twice.¹²
Since the bug is external to the Go project and does not appear to be
fixed upstream, this failure mode can only add noise.
¹https://sourceware.org/bugzilla/show_bug.cgi?id=24628
²https://sourceware.org/bugzilla/show_bug.cgi?id=28551Fixes#43068
Change-Id: I6c92006a5d730f1c4df54b0307f080b3d643cc6b
Reviewed-on: https://go-review.googlesource.com/c/go/+/384234
Trust: Bryan Mills <bcmills@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
go:embed disallows using symlinked files by design.
crypto/elliptic is the first std package to use it as of CL 380475,
and unfortunately that broke the TestRepeatBootstrap long test.
The reason it uses symlinks is for speed; it wants to copy GOROOT/src,
but regular files aren't going to be modified in any way,
so a symlink, if supported, means not needing to copy the contents.
Replace the symlink attempt with hard links,
which will mean regular files remain as such, fixing go:embed.
It's worth noting that on many systems hard links won't work,
as the temporary filesystem tends to be separate,
but it doesn't hurt to try.
In my system, where /tmp is tmpfs, the test now copies more bytes.
With the added Logf, I can see overlayDir goes from ~30ms to ~100ms.
This makes sense, as GOROOT/src currently weighs around 100MiB.
To alleviate that slow-down, stop copying testdata directories,
as they currently weigh around 20MiB and aren't needed for the test.
This gets overlayDir on my system down to an acceptable ~70ms.
I briefly considered teaching overlayDir what files can be symlinks,
but that seemed fairly complex long-term, as any file could be embedded.
While here, start using testing.T.TempDir and fs.WalkDir.
For #50995.
Change-Id: I17947e6bdee96237e1ca0606ad0b95e7c5987bc1
Reviewed-on: https://go-review.googlesource.com/c/go/+/383995
Trust: Daniel Martí <mvdan@mvdan.cc>
Trust: Bryan Mills <bcmills@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
go.dev/cl/339591 changed the code generation to use a constant string,
so that the ~88KiB table can be marked read-only.
The compiled code became a lot better, but unfortunately,
the generated Go source became significantly more inefficient.
The numbers below compare "gofmt -l" and "go tool compile" of said file,
where "old" is the file as of Go 1.17, and "new" as of master in 2022/01/19:
name old time/op new time/op delta
Gofmt 22.8ms ± 6% 898.5ms ± 3% +3837.32% (p=0.000 n=8+8)
GoToolCompile 26.9ms ± 2% 371.1ms ± 2% +1278.36% (p=0.000 n=7+8)
name old user-time/op new user-time/op delta
Gofmt 25.7ms ±65% 897.1ms ± 3% +3383.86% (p=0.000 n=8+8)
GoToolCompile 35.1ms ±26% 367.2ms ± 3% +945.80% (p=0.000 n=8+8)
name old sys-time/op new sys-time/op delta
Gofmt 6.42ms ±276% 7.23ms ±38% ~ (p=0.412 n=8+6)
GoToolCompile 9.20ms ±100% 13.90ms ±53% ~ (p=0.105 n=8+8)
name old peak-RSS-bytes new peak-RSS-bytes delta
Gofmt 9.11MB ± 7% 22.79MB ± 1% +150.23% (p=0.000 n=8+8)
GoToolCompile 25.1MB ± 2% 68.6MB ± 2% +173.57% (p=0.000 n=8+8)
"+" operators are binary expressions at the syntax tree level,
which are represented by packages like go/ast as roughly:
struct {
X Expr
Op Token
Y Expr
}
Since each node is a pointer, chains of "+" operators act like linked lists.
The generated code has about 14k lines, and 8 "+" operators per line,
meaning that we end up with a linked list with over 11k elements.
This explains the slow-down in gofmt; the printer must walk said list,
and it does so more than once to work out how to format it.
It seems like the compiler is similarly affected by the huge length.
To remedy the effect of the linked list, use go:embed instead.
This results in the same string variable with the binary table,
but it greatly reduces the amount of syntax and its cost above.
We still keep the generator around, but modified so it produces the
binary file to be embedded rather than a large Go file.
Finally, we update go/build/deps_test.go to allow crypto/elliptic to
depend on embed; it's a tiny package and crypto/elliptic was already
manually embedding assets via code generation.
The change to deps_test.go was briefly discussed in the issue below.
Fixes#50995.
Change-Id: I0c8b432710e971a296a2e9c99147cc2cad9662aa
Reviewed-on: https://go-review.googlesource.com/c/go/+/380475
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
Trust: Daniel Martí <mvdan@mvdan.cc>
Trust: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Declare receiver type parameters in the function scope, but don't
resolve them (for now), as ast.Object.Decl is not documented to hold
*ast.Idents. This avoids incorrect resolution of identifiers to names
outside the function scope.
Also make tracing and error reporting more consistent.
For golang/go#50956
Change-Id: I8cd61dd25f4c0f6b974221599b00e23d8da206a1
Reviewed-on: https://go-review.googlesource.com/c/go/+/382247
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Due to delayed computation of constraint type sets it is possible that
a type argument is checked against a constraint before that constraint
has been wrapped into an implicit interface (if needed).
When the type checker is about to check whether a type argument
implements a constraint, it's always safe to force wrapping of
a constraint in an implicit interface (if necessary) before doing
the implements check.
Also, use a better position for tracing output related to constraint
type set computation.
Fixes#51048.
Change-Id: I52fecbf57814f09b62762452d7e17c2a230fdd59
Reviewed-on: https://go-review.googlesource.com/c/go/+/383834
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Record the actual argument type for a cap/len call, not the
underlying type.
Fixes#51055.
Change-Id: Ia0e746a462377f030424ccaec0babf72b78da420
Reviewed-on: https://go-review.googlesource.com/c/go/+/383474
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
For the gofrontend, it's not; there are some trailing one bits,
which is permitted by the spec.
Change-Id: I58f5a5347068bb488306ec8e73da7c59376f1ae1
Reviewed-on: https://go-review.googlesource.com/c/go/+/383635
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Change-Id: I119cfb1a0da9af89ced78935b8fcdfdb8d9b4ab6
Reviewed-on: https://go-review.googlesource.com/c/go/+/383794
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
These tests use a slice to represent the base C compiler command (with
flags). Appending to that slice can cause subtle aliasing bugs, such
as commands that silently corrupt the arguments of other concurrent
commands in parallel tests.
In this change, we explicitly reduce the capacity of the command slice
to force appends to it to always allocate unique new slices.
Fixes#49693
Change-Id: Ide466bf65f12cb6cead3dcba69f513cccb60a160
Reviewed-on: https://go-review.googlesource.com/c/go/+/383754
Trust: Bryan Mills <bcmills@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Change run.go to apply the GO_TEST_TIMEOUT_SCALE scaling factor to
test timeouts (mentioned in "-t" clause in test header).
Also with this patch, bump up the timeout for fixedbugs/issue46234.go
from 30 to 45 seconds, to avoid flakes on very slow builders.
Updates #50973.
Change-Id: Icbafa482860e24cc1e72fee53511bcc764d06bf1
Reviewed-on: https://go-review.googlesource.com/c/go/+/382774
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Than McIntosh <thanm@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The dir argument is already in prefix, we shouldn't add it again.
Change-Id: I42a158bec3a43950fce24f57b808da3ad8c5ef5b
Reviewed-on: https://go-review.googlesource.com/c/go/+/383636
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The previous workaround for issue #39466 only disabled this test for
Linux. However, the issue manifests for all arm64 systems with gcc 9.4
and above. The new netbsd-arm64 builder uses NetBSD-current with gcc
10.3, so it fails in the same way.
Updates #39466
Change-Id: I276a99a5e60914e5c22f74a680e461bea17cfe92
Reviewed-on: https://go-review.googlesource.com/c/go/+/383554
Trust: Benny Siegert <bsiegert@gmail.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The code was updated, the comments were not.
Change-Id: If387779f3abd5e8a1b487fe34c33dcf9ce5fa7ff
Reviewed-on: https://go-review.googlesource.com/c/go/+/383495
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Further simplify and regularize Checker.missingMethod and use the
same code in both type checkers.
This enables case-folding lookup for go/types.
Adjusted test case that looks for alternative methods.
Change-Id: I5b8cc598c295c329ff93b1c65787cc6140f0900e
Reviewed-on: https://go-review.googlesource.com/c/go/+/382858
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Remove special case where we don't have a *Checker and always use
Checker.missingMethodReason in Checker.implements.
Look for zero methods rather than empty interface to exit early
from Checker.missingMethod, and remove the extra test in
Checker.implements.
With this change we get consistent and more detailed error messages
from all places where we do a form of the "implements" test.
To make this possible, allow for the receiver to be nil in
- Checker.sprintf
- Checker.missingMethodReason
- Checker.interfacePtrError
- Checker.funcString
Allowing Checker.sprintf with nil Checker permits further simplifying
in a couple of places.
Change-Id: I0ea7178c9efbcd4a25ded2a66e2b058db52dc4d4
Reviewed-on: https://go-review.googlesource.com/c/go/+/383054
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
- Remove the xtyp argument from the Checker.typeAssertion parameter
list; it was confusing and not needed. Adjusted call sites.
- Simplify logic in Checker.typeAssertion.
- Use the same code in both types2 and go/types, specifically
use the same error positions.
- Adjust error messages as needed.
This removes another subtle discrepancy between types2 and go/types.
The go/types error messages don't have the have/want appendix for
the affected error messages yet because we don't use case folding
in lookups yet.
Change-Id: Id39f5c473da36c9baad60082f85cf1f34dc26c50
Reviewed-on: https://go-review.googlesource.com/c/go/+/383014
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Added a funcString helper so we don't need to rewrite strings
with strings.Replace.
Use compiler format for error message about wrong method type;
this removes another unnecessary variation.
Simplify conditions for pointer-to-interface related error:
if one of the involved types is an interface pointer, it can't
have any methods.
Rewrite logic so we don't need all the else-if branches.
Adjusted a test case for types2 accordingly. The go/types version
of this test case has a different error because the implementation
of Checker.typeAssertion is different in the two type checkers
(the types2 version gives errors closer to the 1.17 compiler).
Change-Id: I19e604d7063c3e31e8290bd78384a9f38bb0d740
Reviewed-on: https://go-review.googlesource.com/c/go/+/382694
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Because Checker.missingMethod also looks up methods matching
matching case-folded names, when Checker.missingMethod returns
an alternative method, that method does not automatically have
the wrong type. It may be a method with a different name.
Adjust types2.MissingMethod to check the alternative method
name before reporting a wrong type.
Add API test that verifies (now correct) behavior for this
case.
Ported the code also to go/types, though it was not a bug
there yet because looking up with case-folding is not yet
enabled.
Change-Id: Iaa48808535c9265a9879338ea666c6c021e93a2b
Reviewed-on: https://go-review.googlesource.com/c/go/+/382634
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
There is no need to check for length equality of type parameter
lists in Checker.missingMethod: the Identical predicate does
this check. Furthermore, we don't have methods with their own
type parameters. Remove the unnecessary (duplicate) code.
Also, update doc string on missingMethod and rename the 2nd
result parameter for clarity, and clarify internal comments.
For go/types, include the same case-folding code as for types2
but leave it disabled or now. Adjust any other differences in
the missingMethod implementation.
With this change, the types2 and go/types code of missingMethod
is identical again except for the disabled case-folding lookup.
No functionality changes.
Preparation for fixing some of the outstanding error reporting issues.
Change-Id: I4778d006c17f4e084ecc2cac7386c68e86aa49eb
Reviewed-on: https://go-review.googlesource.com/c/go/+/382614
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
types2 has some code to handle case-folding when doing method lookups
which was missing in go/types. This change is a first step to match
the implementations. Specifically:
In types2:
- remove the lookupMethodFold names in favor of just lookupMethod,
but with the foldCase flag (e.g., instead if lookupMethodFold,
we just use lookupMethod)
- rename checkFold to foldCase everywhere
- add foldCase parameter where it was missing
- moved foldCase paremeter to the end in lookupFieldOrMethod
- no functionality changes
In go/types:
- match function signatures with types2 use
- always provide false as argument for foldCase for now
- no functionality changes
Preparation for fixing some of the outstanding error reporting issues.
Change-Id: If129a5feb89ddf96a3596e8d73b23afa591875a0
Reviewed-on: https://go-review.googlesource.com/c/go/+/382461
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
