Consider an interface value i of type I and concrete value c of type C.
Prior to this CL, i==c was evaluated as
I(c) == i
Evaluating I(c) can allocate.
This CL changes the evaluation of i==c to
x, ok := i.(C); ok && x == c
The new generated code is shorter and does not allocate directly.
If C is small, as it is in every instance in the stdlib,
the new code also uses less stack space
and makes one runtime call instead of two.
If C is very large, the original implementation is used.
The cutoff for "very large" is 1<<16,
following the stack vs heap cutoff used elsewhere.
This kind of comparison occurs in 38 places in the stdlib,
mostly in the net and os packages.
benchmark old ns/op new ns/op delta
BenchmarkEqEfaceConcrete 29.5 7.92 -73.15%
BenchmarkEqIfaceConcrete 32.1 7.90 -75.39%
BenchmarkNeEfaceConcrete 29.9 7.90 -73.58%
BenchmarkNeIfaceConcrete 35.9 7.90 -77.99%
Fixes#9370.
Change-Id: I7c4555950bcd6406ee5c613be1f2128da2c9a2b7
Reviewed-on: https://go-review.googlesource.com/2096
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
When compiling the stdlib most of the calls
to sgen are for exactly 2 or 3 words:
85% for 6g and 70% for 8g.
Special case them for performance.
This optimization is not relevant to 5g and 9g.
6g
benchmark old ns/op new ns/op delta
BenchmarkCopyFat16 3.25 0.82 -74.77%
BenchmarkCopyFat24 5.47 0.95 -82.63%
8g
benchmark old ns/op new ns/op delta
BenchmarkCopyFat8 3.84 2.42 -36.98%
BenchmarkCopyFat12 4.94 2.15 -56.48%
Change-Id: I8bc60b453f12597dfd916df2d072a7d5fc33ab85
Reviewed-on: https://go-review.googlesource.com/2607
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
When possible, generate nodl/nodr directly into DI/SI
rather than going through a temporary register.
CX has already been saved; use it during trailing bytes cleanup.
Change-Id: I4ec6209bcc5d3bfdc927c5c132009bd8d791ada3
Reviewed-on: https://go-review.googlesource.com/2608
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
No code modifications.
This is in preparation for improving the wbuf abstraction.
Change-Id: I719543a345c34d079b7e39b251eccd5dd8a07826
Reviewed-on: https://go-review.googlesource.com/4710
Reviewed-by: Rick Hudson <rlh@golang.org>
Plan 9's sysFree has an optimization where if the object being freed
is the last object allocated, it will roll back the brk to allow the
memory to be reused by sysAlloc. However, it does not zero this
"returned" memory, so as a result, sysAlloc can return non-zeroed
memory after a sysFree. This leads to corruption because the runtime
assumes sysAlloc returns zeroed memory.
Fix this by zeroing the memory returned by sysFree.
Fixes#9846.
Change-Id: Id328c58236eb7c464b31ac1da376a0b757a5dc6a
Reviewed-on: https://go-review.googlesource.com/4700
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: David du Colombier <0intro@gmail.com>
Dump frames of functions.
Add function name and var width to output.
Change-Id: Ida06b8def96178fa550ca90836eb4a2509b9e13f
Reviewed-on: https://go-review.googlesource.com/3870
Reviewed-by: Russ Cox <rsc@golang.org>
typedslicecopy is another write barrier that is not
understood by racewalk. It seems quite complex to handle it
in the compiler, so instead just instrument it in runtime.
Update #9796
Change-Id: I0eb6abf3a2cd2491a338fab5f7da22f01bf7e89b
Reviewed-on: https://go-review.googlesource.com/4370
Reviewed-by: Russ Cox <rsc@golang.org>
Walk calls it outervalue, racewalk calls it basenod,
isstack does it manually and slightly differently.
Change-Id: Id5b5d32b8faf143fe9d34bd08457bfab6fb33daa
Reviewed-on: https://go-review.googlesource.com/3745
Reviewed-by: Russ Cox <rsc@golang.org>
Support the following conversions in escape analysis:
[]rune("foo")
[]byte("foo")
string([]rune{})
If the result does not escape, allocate temp buffer on stack
and pass it to runtime functions.
Change-Id: I1d075907eab8b0109ad7ad1878104b02b3d5c690
Reviewed-on: https://go-review.googlesource.com/3590
Reviewed-by: Russ Cox <rsc@golang.org>
(In non-Go print formats, the 016 includes the leading 0x prefix.
No one noticed, but we were printing hex numbers with a minimum
of 30 digits, not 32.)
Change-Id: I10ff7a51a567ad7c8440418ac034be9e4b2d6bc1
Reviewed-on: https://go-review.googlesource.com/4592
Reviewed-by: Austin Clements <austin@google.com>
This matches all the other pseudo-packages.
The line was simply forgotten.
Change-Id: I278f6cbcfc883ea7efad07f99fc8c853b9b5d274
Reviewed-on: https://go-review.googlesource.com/4591
Reviewed-by: Austin Clements <austin@google.com>
Otherwise different qsort implementations might result
in different sort orders and therefore different compiled
object files.
Change-Id: Ie783ba55a55af06941307e150b0c406e0a8128b0
Reviewed-on: https://go-review.googlesource.com/4590
Reviewed-by: Austin Clements <austin@google.com>
It does not convert to Go well.
Being able to do this just once, instead of 4 times, was the primary
motivation for all the recent refactoring (not that it wasn't overdue).
Still bit-for-bit identical.
Change-Id: Ia01f17948441bf64fa78ec4226f0bb40af0bbaab
Reviewed-on: https://go-review.googlesource.com/3962
Reviewed-by: Austin Clements <austin@google.com>
Now there is only one registerizer shared among all the systems.
There are some unfortunate special cases based on arch.thechar
in reg.c, to preserve bit-for-bit compatibility during the refactoring.
Most are probably bugs one way or another and should be revisited.
Change-Id: I153b435c0eaa05bbbeaf8876822eeb6dedaae3cf
Reviewed-on: https://go-review.googlesource.com/3883
Reviewed-by: Austin Clements <austin@google.com>
gc/order.c rewrites OASOP nodes into ordinary assignments.
The back ends never see them anymore.
Change-Id: I268ac8bdc92dccd7123110a21f99ada3ceeb2baa
Reviewed-on: https://go-review.googlesource.com/3882
Reviewed-by: Austin Clements <austin@google.com>
This isn't everything, but it's a start.
Still producing bit-identical compiler output.
The semantics of the old back ends is preserved,
even when they are probably buggy.
There are some TODOs in gc/gsubr.c to
remove special cases to preserve bugs in 5g and 8g.
Change-Id: I28ae295fbfc94ef9df43e13ab96bd6fc2f194bc4
Reviewed-on: https://go-review.googlesource.com/3802
Reviewed-by: Austin Clements <austin@google.com>
This avoids surprises.
Change-Id: Iaae67da2d12e29c4e797ad6313e0895f7ce80cb1
Reviewed-on: https://go-review.googlesource.com/4480
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Alan Donovan <adonovan@google.com>
Add local workbufs to the m struct in order to reduce contention.
Add consistency checks for workbuf ownership.
Chain workbufs through call change to avoid swapping them
to and from the m struct.
Adjust the size of the workbuf so that the mutators can
more frequently pass modifications to the GC thus shifting
some work from the STW mark termination phase to the concurrent
mark phase.
Change-Id: I557b53af34ad9972265e0ed9f5996e52d548563d
Reviewed-on: https://go-review.googlesource.com/3972
Reviewed-by: Austin Clements <austin@google.com>
Fixes#9791
g.issystem flag setup races with other code wherever we set it.
Even if we set both in parent goroutine and in the system goroutine,
it is still possible that some other goroutine crashes
before the flag is set. We could pass issystem flag to newproc1,
but we start all goroutines with go nowadays.
Instead look at g.startpc to distinguish system goroutines (similar to topofstack).
Change-Id: Ia3467968dee27fa07d9fecedd4c2b00928f26645
Reviewed-on: https://go-review.googlesource.com/4113
Reviewed-by: Keith Randall <khr@golang.org>
Update #8832
This is probably not the root cause of the issue.
Resolve TODO about setting unusedsince on a wrong span.
Change-Id: I69c87e3d93cb025e3e6fa80a8cffba6ad6ad1395
Reviewed-on: https://go-review.googlesource.com/4390
Reviewed-by: Keith Randall <khr@golang.org>
Currently, if there is a VERSION.cache, running make.bash will set
runtime.theVersion to the revision as of the *last* make.bash run
instead of the current make.bash run.
For example,
$ git rev-parse --short HEAD
5c4a86d
$ ./make.bash
...
$ cat ../VERSION.cache
devel +5c4a86d Tue Feb 10 01:46:30 2015 +0000
$ git checkout a1dbb92
$ ./make.bash
...
$ go version
go version devel +5c4a86d Tue Feb 10 01:46:30 2015 +0000 linux/amd64
$ ./make.bash
...
$ go version
go version devel +a1dbb92 Tue Feb 10 02:31:27 2015 +0000 linux/amd64
This happens because go tool dist reads the potentially stale
VERSION.cache into goversion during early initialization; then cleans,
which deletes VERSION.cache; then builds the runtime using the stale
revision read in to goversion. It isn't until make later in the build
process, when make.bash invokes go tool dist again, that VERSION.cache
gets updated with the current revision.
To address this, simply don't bother fetching the version until go
tool dist needs it and don't bother caching the value in memory. This
is more robust since it interacts with cleaning in the expected ways.
Futhermore, there's no downside to eliminating the in-memory cache;
the file system cache is perfectly reasonable for the whole three
times make.bash consults it.
Change-Id: I8c480100e56bb2db0816e8a088177004d9e87973
Reviewed-on: https://go-review.googlesource.com/4540
Reviewed-by: Russ Cox <rsc@golang.org>
If an absolute domain name (i.e. ends in a '.' like "example.com.") is used
with ssl/tls, the certificate will be reported as invalid. In matchHostnames,
the host and patterns are split on '.' and if the lengths of the resulting
slices do not match, the function returns false. When splitting an absolute
domain name on '.', the slice will have an extra empty string at the end. This
empty string should be discarded before comparison, if present.
Fixes#9828
Change-Id: I0e39674b44a6f93b5024497e76cf1b550832a61d
Reviewed-on: https://go-review.googlesource.com/4380
Reviewed-by: Adam Langley <agl@golang.org>
TryBot: Adam Langley <agl@golang.org>
Container symbols shouldn't be considered as functions in the functab.
Having them present probably messes up function lookup, as you might get
the descriptor of the container instead of the descriptor of the actual
function on the stack. It also messed up the findfunctab because these
entries caused off-by-one errors in how functab entries were counted.
Normal code is not affected - it only changes (& hopefully fixes) the
behavior for libraries linked as a unit, like:
net
runtime/cgo
runtime/race
Fixes#9804
Change-Id: I81e036e897571ac96567d59e1f1d7f058ca75e85
Reviewed-on: https://go-review.googlesource.com/4290
Reviewed-by: Russ Cox <rsc@golang.org>
- Frexp, Ldexp are equivalents to the corresponding math functions.
- Set now has the same prec behavior as the other functions
- Copy is a true assignment (replaces old version of Set)
- Cmp now handles infinities
- more tests
Change-Id: I0d33980c08be3095b25d7b3d16bcad1aa7abbd0f
Reviewed-on: https://go-review.googlesource.com/4292
Reviewed-by: Alan Donovan <adonovan@google.com>
The sanity checks at the beginning of WriteMsgUDP were too
strict, and did not allow a case sendmsg(2) suppports: sending
to a connected UDP socket.
This fixes the sanity checks. Either the socket is unconnected,
and a destination addresses is required (what all existing callers
must have been doing), or the socket is connected and an explicit
destination address must not be used.
Fixes#9807
Change-Id: I08d4ec3c2bf830335c402acfc0680c841cfcec71
Reviewed-on: https://go-review.googlesource.com/3951
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
I think the test was meant to test requests to 'localhost:80' instead
of 'localhost:80:80'. It passes even with 'localhost:80:80' because
net.SplitHostPort fails inside useProxy. Please comment if you want to
leave old 'localhost:80' is the list too to check old code path.
Change-Id: Ic4cd21901563449e3d4e2f4c8caf723f4ca15bac
u
Reviewed-on: https://go-review.googlesource.com/4293
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This CL introduces new methods for 'context' type, so we can
manipulate its values in an architecture independent way.
Use new methods to replace both 386 and amd64 versions of
dosigprof with single piece of code.
There is more similar code to be converted in the following CLs.
Also remove os_windows_386.go and os_windows_amd64.go. These
contain unused functions.
Change-Id: I28f76aeb97f6e4249843d30d3d0c33fb233d3f7f
Reviewed-on: https://go-review.googlesource.com/2790
Reviewed-by: Minux Ma <minux@golang.org>
I am an idiot but the failure to implement this means we can decide
exactly what its design should be for 1.5
Change-Id: Ie2b025fcd899d306ddeddd09d1d0e8f9a99ab7a8
Reviewed-on: https://go-review.googlesource.com/4291
Reviewed-by: Minux Ma <minux@golang.org>
Fixes#9732Fixes#9819
Rather than detecting vfp support via catching SIGILL signals,
parse the contents of /proc/cpuinfo.
As the GOARM values for NaCl and freebsd are hard coded, this parsing
logic only needs to support linux/arm.
This change also fixes the nacl/arm build which is broken because the
first stage of nacltest.bash is executed with GOARM=5, embedding that
into 5g.
The second stage of nacltest.bash correctly detects GOARM=7, but this is
ignored as we pass --no-clean at that point, and thus do not replace
the compiler.
Lastyly, include a fix to error message in nacltest.bash
Change-Id: I13f306ff07a99b44b493fade72ac00d0d5097e1c
Reviewed-on: https://go-review.googlesource.com/3981
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
CL 2118 makes the assumption that all references to runtime.tlsg
should be accompanied by a declaration of runtime.tlsg if its type
should be a normal variable, instead of a placeholder for TLS
relocation.
Because if runtime.tlsg is not declared by the runtime package,
the type of runtime.tlsg will be zero, so fix the check in liblink
to look for 0 instead of STLSBSS (the type will be initialized by
cmd/ld, but cmd/ld doesn't run during assembly).
Change-Id: I691ac5c3faea902f8b9a0b963e781b22e7b269a7
Reviewed-on: https://go-review.googlesource.com/4030
Reviewed-by: David Crawshaw <crawshaw@golang.org>
"go test -v" buffers output if more than one package is
being tested to avoid mixing the outputs from multiple
tests running in parallel. It currently enables streaming
if there's only a single package under test.
It is ok to stream output from multiple tests if we know
that they're not going to be running in parallel.
To see the difference: go test -v -p=1 runtime fmt -short
Change-Id: Idc24575c899eac30d553e0bf52b86f90e189392d
Reviewed-on: https://go-review.googlesource.com/4153
Reviewed-by: Ian Lance Taylor <iant@golang.org>
