When a constant can be encoded in a logical instruction (BITCON), do
it this way instead of using the constant pool. The BITCON testing
code runs faster than table lookup (using map):
(on AMD64 machine, with pseudo random input)
BenchmarkIsBitcon-4 300000000 4.04 ns/op
BenchmarkTable-4 50000000 27.3 ns/op
The equivalent C code of BITCON testing is formally verified with
model checker CBMC against linear search of the lookup table.
Also handle cases when a constant can be encoded in a MOV instruction.
In this case, materializa the constant into REGTMP without using the
constant pool.
When constants need to be added to the constant pool, make sure to
check whether it fits in 32-bit. If not, store 64-bit.
Both legacy and SSA compiler backends are happy with this.
Fixes#16226.
Change-Id: I883e3069dee093a1cdc40853c42221a198a152b0
Reviewed-on: https://go-review.googlesource.com/26631
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Last part of the 386 SSA port.
Modify the x86 backend to simulate SSE registers and
instructions with 387 registers and instructions.
The simulation isn't terribly performant, but it works,
and the old implementation wasn't very performant either.
Leaving to people who care about 387 to optimize if they want.
Turn on SSA backend for 386 by default.
Fixes#16358
Change-Id: I678fb59132620b2c47e993c1c10c4c21135f70c0
Reviewed-on: https://go-review.googlesource.com/25271
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Use the destination register for materializing the pc
for GOT references also. See https://go-review.googlesource.com/c/25442/
The SSA backend assumes CX does not get clobbered for these instructions.
Mark duffzero as clobbering CX. The linker needs to clobber CX
to materialize the address to call. (This affects the non-shared-library
duffzero also, but hopefully forbidding one register across duffzero
won't be a big deal.)
Hopefully this is all the cases where the linker is clobbering CX
under the hood and SSA assumes it isn't.
Change-Id: I080c938170193df57cd5ce1f2a956b68a34cc886
Reviewed-on: https://go-review.googlesource.com/26611
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Access to globals requires a 2-instruction sequence on PIC 386.
MOVL foo(SB), AX
is translated by the obj package into:
CALL getPCofNextInstructionInTempRegister(SB)
MOVL (&foo-&thisInstruction)(tmpReg), AX
The call returns the PC of the next instruction in a register.
The next instruction then offsets from that register to get the
address required. The tricky part is the allocation of the
temp register. The legacy compiler always used CX, and forbid
the register allocator from allocating CX when in PIC mode.
We can't easily do that in SSA because CX is actually a required
register for shift instructions. (I think the old backend got away
with this because the register allocator never uses CX, only
codegen knows that shifts must use CX.)
Instead, we allow the temp register to be anything. When the
destination of the MOV (or LEA) is an integer register, we can
use that register. Otherwise, we make sure to compile the
operation using an LEA to reference the global. So
MOVL AX, foo(SB)
is never generated directly. Instead, SSA generates:
LEAL foo(SB), DX
MOVL AX, (DX)
which is then rewritten by the obj package to:
CALL getPcInDX(SB)
LEAL (&foo-&thisInstruction)(DX), AX
MOVL AX, (DX)
So this CL modifies the obj package to use different thunks
to materialize the pc into different registers. We use the
registers that regalloc chose so that SSA can still allocate
the full set of registers.
Change-Id: Ie095644f7164a026c62e95baf9d18a8bcaed0bba
Reviewed-on: https://go-review.googlesource.com/25442
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
It's not a new backend, just a PtrSize==4 modification
of the existing AMD64 backend.
Change-Id: Icc63521a5cf4ebb379f7430ef3f070894c09afda
Reviewed-on: https://go-review.googlesource.com/25586
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reg allocator skips flag-typed values. Flag allocator uses the type
and whether the op has "clobberFlags" set.
Tested on AMD64, ARM, ARM64, 386. Passed 'toolstash -cmp' on AMD64.
PPC64 is coded blindly.
Change-Id: Ib1cc27efecef6a1bb27f7d7ed035a582660d244f
Reviewed-on: https://go-review.googlesource.com/25480
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Includes hmul (all widths)
compare for boolean result and simplifications
shift operations plus changes/additions for implementation
(ORN, ADDME, ADDC)
Also fixed a backwards-operand CMP.
Change-Id: Id723c4e25125c38e0d9ab9ec9448176b75f4cdb4
Reviewed-on: https://go-review.googlesource.com/25410
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
When compiling with -buildmode=shared, a map[int32]*_type is created for
each extra module mapping duplicate types back to a canonical object.
This is done in the function typelinksinit, which is called before the
init function that sets up the hash functions for the map
implementation. The result is typemap becomes unusable after
runtime initialization.
The fix in this CL is to move algorithm init before typelinksinit in
the runtime setup process. (For 1.8, we may want to turn typemap into
a sorted slice of types and use binary search.)
Manually tested on GOOS=linux with:
GOHOSTARCH=386 GOARCH=386 ./make.bash && \
go install -buildmode=shared std && \
cd ../test && \
go run run.go -linkshared
Fixes#16590
Change-Id: Idc08c50cc70d20028276fbf564509d2cd5405210
Reviewed-on: https://go-review.googlesource.com/25469
Run-TryBot: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Previously, genMatch0 and genResult0 contained
lots of duplication: locating the op, parsing
the value, validation, etc.
Parsing and validation was mixed in with code gen.
Extract a helper, parseValue. It is responsible
for parsing the value, locating the op, and doing
shared validation.
As a bonus (and possibly as my original motivation),
make op selection pay attention to the number
of args present.
This allows arch-specific ops to share a name
with generic ops as long as there is no ambiguity.
It also detects and reports unresolved ambiguity,
unlike before, where it would simply always
pick the generic op, with no warning.
Also use parseValue when generating the top-level
op dispatch, to ensure its opinion about ops
matches genMatch0 and genResult0.
The order of statements in the generated code used
to depend on the exact rule. It is now somewhat
independent of the rule. That is the source
of some of the generated code changes in this CL.
See rewritedec64 and rewritegeneric for examples.
It is a one-time change.
The op dispatch switch and functions used to be
sorted by opname without architecture. The sort
now includes the architecture, leading to further
generated code changes.
See rewriteARM and rewriteAMD64 for examples.
Again, it is a one-time change.
There are no functional changes.
Change-Id: I22c989183ad5651741ebdc0566349c5fd6c6b23c
Reviewed-on: https://go-review.googlesource.com/24649
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
macOS Sierra beta4 changed the kernel interface for getting time.
DX now optionally points to an address for additional info.
Set it to zero to avoid corrupting memory.
Fixes#16570
Change-Id: I9f537e552682045325cdbb68b7d0b4ddafade14a
Reviewed-on: https://go-review.googlesource.com/25400
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Quentin Smith <quentin@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The commit in golang.org/cl/22354 groups constructors functions under
the type that they construct to. However, this caused a minor regression
where functions that had unexported return values were not being printed
at all. Thus, we forgo the grouping logic if the type the constructor falls
under is not going to be printed.
Fixes#16568
Change-Id: Idc14f5d03770282a519dc22187646bda676af612
Reviewed-on: https://go-review.googlesource.com/25369
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
Reviewed-by: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Changes made:
* Disallow star expression on interfaces as this is not possible.
* Show an embedded "error" in an interface as public similar to
how godoc does it.
* Properly handle selector expressions in both structs and interfaces.
This is possible since a type may refer to something defined in
another package (e.g. io.Reader).
Before:
<<<
$ go doc runtime.Error
type Error interface {
// RuntimeError is a no-op function but
// serves to distinguish types that are run time
// errors from ordinary errors: a type is a
// run time error if it has a RuntimeError method.
RuntimeError()
// Has unexported methods.
}
$ go doc compress/flate Reader
doc: invalid program: unexpected type for embedded field
doc: invalid program: unexpected type for embedded field
type Reader interface {
io.Reader
io.ByteReader
}
>>>
After:
<<<
$ go doc runtime.Error
type Error interface {
error
// RuntimeError is a no-op function but
// serves to distinguish types that are run time
// errors from ordinary errors: a type is a
// run time error if it has a RuntimeError method.
RuntimeError()
}
$ go doc compress/flate Reader
type Reader interface {
io.Reader
io.ByteReader
}
>>>
Fixes#16567
Change-Id: I272dede971eee9f43173966233eb8810e4a8c907
Reviewed-on: https://go-review.googlesource.com/25365
Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This was previously fixed in https://golang.org/cl/21497 but not enough.
Fixes#16523
Change-Id: I678543a656304c82d654e25e12fb094cd6cc87e8
Reviewed-on: https://go-review.googlesource.com/25330
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
SSA compiler on AMD64 may spill Duff-adjusted address as scalar. If
the object is on stack and the stack moves, the spilled address become
invalid.
Making the spill pointer-typed does not work. The Duff-adjusted address
points to the memory before the area to be zeroed and may be invalid.
This may cause stack scanning code panic.
Fix it by doing Duff-adjustment in genValue, so the intermediate value
is not seen by the reg allocator, and will not be spilled.
Add a test to cover both cases. As it depends on allocation, it may
be not always triggered.
Fixes#16515.
Change-Id: Ia81d60204782de7405b7046165ad063384ede0db
Reviewed-on: https://go-review.googlesource.com/25309
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Updates #16396
Change-Id: I7b4f85610e66f2c77c17cf8898cc41d81b2efc8c
Reviewed-on: https://go-review.googlesource.com/25283
Reviewed-by: Chris Broadfoot <cbro@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
Apparently the old backend needs NEG instruction having RegRead set,
even this instruction does not take a Reg field... I don't think SSA
uses this flag, so just leave it as it was. SSA is still happy.
Fix ARM64 build on https://build.golang.org/?branch=dev.ssa
Change-Id: Ia7e7f2ca217ddae9af314d346af5406bbafb68e8
Reviewed-on: https://go-review.googlesource.com/25302
Reviewed-by: David Chase <drchase@google.com>
Mutator goroutines that allocate memory during the concurrent mark
phase are required to spend some time assisting the garbage
collector. The magnitude of this mandatory assistance is proportional
to the goroutine's allocation debt and subject to the assistance
ratio as calculated by the pacer.
When assisting the garbage collector, a mutator goroutine will go
beyond paying off its allocation debt. It will build up extra credit
to amortize the overhead of the assist.
In fast-allocating applications with high assist ratios, building up
this credit can take the affected goroutine's entire time slice.
Reduce the penalty on each goroutine being selected to assist the GC
in two ways, to spread the responsibility more evenly.
First, do a consistent amount of extra scan work without regard for
the pacer's assistance ratio. Second, reduce the magnitude of the
extra scan work so it can be completed within a few hundred
microseconds.
Commentary on gcOverAssistWork is by Austin Clements, originally in
https://golang.org/cl/24704
Updates #14812Fixes#16432
Change-Id: I436f899e778c20daa314f3e9f0e2a1bbd53b43e1
Reviewed-on: https://go-review.googlesource.com/25155
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Rick Hudson <rlh@golang.org>
Reviewed-by: Chris Broadfoot <cbro@golang.org>
Instead of comparing the address of the end of the memory to zero/copy,
comparing the address of the last element, which is a valid pointer.
Also unify large and unaligned Zero/Move, by passing alignment as AuxInt.
Fixes#16515 for ARM.
Change-Id: I19a62b31c5acf5c55c16a89bea1039c926dc91e5
Reviewed-on: https://go-review.googlesource.com/25300
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Support the following:
- Shifts. ARM64 machine instructions only use lowest 6 bits of the
shift (i.e. mod 64). Use conditional selection instruction to
ensure Go semantics.
- Zero/Move. Alignment is ensured.
- Hmul, Avg64u, Sqrt.
- reserve R18 (platform register in ARM64 ABI) and R29 (frame pointer
in ARM64 ABI).
Everything compiles, all.bash passed (with non-SSA test disabled).
Change-Id: Ia8ed58dae5cbc001946f0b889357b258655078b1
Reviewed-on: https://go-review.googlesource.com/25290
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
https://golang.org/cl/25233 was detecting the OS X release at compile
time, not run time. Detect it at run time instead.
Fixes#16473 (again)
Change-Id: I6bec4996e57aa50c52599c165aa6f1fae7423fa7
Reviewed-on: https://go-review.googlesource.com/25281
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
Reviewed-by: Chris Broadfoot <cbro@golang.org>
Updates x/net/http2 to git rev 6a513af for:
http2: return flow control for closed streams
https://golang.org/cl/25231
http2: make Transport prefer HTTP response header recv before body write error
https://golang.org/cl/24984
http2: make Transport treat "Connection: close" the same as Request.Close
https://golang.org/cl/24982Fixesgolang/go#16481
Change-Id: Iaddb166387ca2df1cfbbf09a166f8605578bec49
Reviewed-on: https://go-review.googlesource.com/25282
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
Currently the pprof package gives almost no guidance for how to use it
and, despite the standard boilerplate used to create CPU and memory
profiles, this boilerplate appears nowhere in the pprof documentation.
Update the pprof package documentation to give the standard
boilerplate in a form people can copy, paste, and tweak. This
boilerplate is based on rsc's 2011 blog post on profiling Go programs
at https://blog.golang.org/profiling-go-programs, which is where I
always go when I need to copy-paste the boilerplate.
Change-Id: I74021e494ea4dcc6b56d6fb5e59829ad4bb7b0be
Reviewed-on: https://go-review.googlesource.com/25182
Reviewed-by: Rick Hudson <rlh@golang.org>
Conservative fix for the OS X 10.8 crash. We can unify them back together
during the Go 1.8 dev cycle.
Fixes#16473
Change-Id: If07228deb2be36093dd324b3b3bcb31c23a95035
Reviewed-on: https://go-review.googlesource.com/25233
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
Added support for ClosureCall, DeferCall, InterCall
(GoCall not yet tested).
Added support for GetClosurePtr, IsNonNil, IsInBounds, IsSliceInBounds, NilCheck
(Convert and GetG not yet tested)
Still need to implement NilCheck optimizations.
Fixed move boolean constant, order of operands to subtract.
Updates #16010.
Change-Id: Ibe0f6a6e688df4396cd77de0e9095997e4ca8ed2
Reviewed-on: https://go-review.googlesource.com/25241
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Adds a test case for calling context.WithDeadline() where the deadline
exists in the past. This change increases the code coverage of the
context package.
Change-Id: Ib486bf6157e779fafd9dab2b7364cdb5a06be36e
Reviewed-on: https://go-review.googlesource.com/25007
Reviewed-by: Sameer Ajmani <sameer@golang.org>
Run-TryBot: Sameer Ajmani <sameer@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
From at least Go 1.4 to Go 1.6, Transport.RoundTrip would return the
error value from net.Conn.Read directly when the initial Read (1 byte
Peek) failed while reading the HTTP response, if a request was
outstanding. While never a documented or tested promise, Go 1.7 changed the
behavior (starting at https://golang.org/cl/23160).
This restores the old behavior and adds a test (but no documentation
promises yet) while keeping the fix for spammy logging reported in #15446.
This looks larger than it is: it just changes errServerClosedConn from
a variable to a type, where the type preserves the underlying
net.Conn.Read error, for unwrapping later in Transport.RoundTrip.
Fixes#16465
Change-Id: I6fa018991221e93c0cfe3e4129cb168fbd98bd27
Reviewed-on: https://go-review.googlesource.com/25153
Reviewed-by: Andrew Gerrand <adg@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Because PPC lacks store-immediate, remove the instruction
that implies that it exists. Replace it with storezero for
the special case of storing zero, because R0 is reserved zero
for Go (though the assembler knows this, do it in SSA).
Also added address folding for storezero.
(Now corrected to use right-sized stores in bulk-zero code.)
Hello.go now compiles to
genssa main
00000 (...hello.go:7) TEXT "".main(SB), $0
00001 (...hello.go:7) FUNCDATA $0, "".gcargs·0(SB)
00002 (...hello.go:7) FUNCDATA $1, "".gclocals·1(SB)
v23 00003 (...hello.go:8) MOVD $go.string."Hello, World!\n"(SB), R3
v11 00004 (...hello.go:8) MOVD R3, 32(R1)
v22 00005 (...hello.go:8) MOVD $14, R3
v6 00006 (...hello.go:8) MOVD R3, 40(R1)
v20 00007 (...hello.go:8) MOVD R0, 48(R1)
v18 00008 (...hello.go:8) MOVD R0, 56(R1)
v9 00009 (...hello.go:8) MOVD R0, 64(R1)
v10 00010 (...hello.go:8) CALL fmt.Printf(SB)
b2 00011 (...hello.go:9) RET
00012 (<unknown line number>) END
Updates #16010
Change-Id: I33cfd98c21a1617502260ac753fa8cad68c8d85a
Reviewed-on: https://go-review.googlesource.com/25151
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Mostly copied from ARM port, with instruction names and Prog fields
adjusted, and 64-bit int ops added. Not complete.
Fib compiles and runs correctly.
Change-Id: Id3ecb0d4b571200a035344b3e8e4408769f76221
Reviewed-on: https://go-review.googlesource.com/25130
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Noticed when investigating a separate issue.
No external bug report or repro yet.
Change-Id: I8a1641a43163f22b09accd3beb25dd9e2a68a238
Reviewed-on: https://go-review.googlesource.com/25152
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
GOARCH=386 SSATEST=1 ./all.bash passes
Caveat: still needs changes to test/ files to use *_ssa.go versions. I
won't check those changes in with this CL because the builders will
complain as they don't have SSATEST=1.
Mostly minor fixes.
Implement float <-> uint32 in assembly. It seems the simplest option
for now.
GO386=387 does not work. That's why I can't make SSA the default for
386 yet.
Change-Id: Ic4d4402104d32bcfb1fd612f5bb6539f9acb8ae0
Reviewed-on: https://go-review.googlesource.com/25119
Reviewed-by: Cherry Zhang <cherryyz@google.com>
It was removed in upstream Chrome https://codereview.chromium.org/2016863004
Rather than update to the latest version, make the minimal change for Go 1.7 and
change the "showToUser" boolean from true to false.
Tested by hand that it goes away after this change.
Updates #16247
Change-Id: I051f49da878e554b1a34a88e9abc70ab50e18780
Reviewed-on: https://go-review.googlesource.com/25117
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
For register-register move, if there is only one use, allocate it in
the same register so we don't need to emit an instruction.
Updates #15365.
Change-Id: Iad41843854a506c521d577ad93fcbe73e8de8065
Reviewed-on: https://go-review.googlesource.com/25059
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
