Also, handle *ast.StarExpr in the identifier code. This fixes a specific
case with deep completions and documentation.
Change-Id: I630ae4e8f1c123ba1fdea85e6862ae93396e2cd4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/194564
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Our original caching plan was to use only the file ParseGoHandles as
cache keys to define a given package. However, because of package test
variants, we cannot rely on files alone. A package may have the exact
same set of files, but be a test variant. Add the ID to the key to avoid
clobbering entries in the cache.
Also, remove the unused metadata ID cache.
Change-Id: I4b33de1f83f6c769d23441e98a2a7324ff0fa1b0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/194571
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Now when a file is deleted we force the file's packages to refresh
go/packages metadata, and kick off diagnostics.
I made a couple other changes to watched file handling:
- Kick off diagnostics in a goroutine to match how DidChange works.
This will allow us to work through big sets of file changes faster,
and will save duplicated work once type checking can be canceled.
- Don't assume a watched file is only part of one view.
Two interesting cases we don't handle yet:
- If the deleted file was the only file in the package, we don't
currently update diagnostics for dependent packages. This requires
rejiggering how diagnostics are invoked a bit.
- If the deleted file is still open in the editor and then later
closed, we don't trigger metadata/diagnostics refresh on DidClose.
Updates golang/go#31553
Change-Id: I65768614c24d9800ffea149ccdbdbd3cb7b2f3d8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/193121
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
We now wait to build views until we have the options for that view,
and pass the options in to the view constructor.
The environment and build flags are now part of the view options.
Change-Id: I303c8ba1eefd01b66962ba9cadb4847d3d2e1d3b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/194278
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
In the case of documentation items for completion items, we should make
sure to use the ASTs and type information for the originating package.
To do this while avoiding race conditions, we have to do this by
breadth-first searching the top-level package and its dependencies.
Change-Id: Id657be969ca3e400bb2bbd769a82d88e91865764
Reviewed-on: https://go-review.googlesource.com/c/tools/+/194477
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
I moved the "usePlaceholders" config field on to CompletionOptions.
This way the completion code generates a single snippet with a little
conditional logic based on the "WantPlaceholders" option instead of
juggling the generation of two almost identical "plain" and
"placeholder" snippets at the same time. It also reduces the work done
generating completion candidates a little.
I also made a minor tweak to the snippet builder where empty
placeholders are now always represented as e.g "${1:}" instead of
"${1}" or "${1:}", depending on if you passed a callback to
WritePlaceholder() or not.
Change-Id: Ib84cc0cd729a11b9e13ad3ac4b6fd2d82460acd5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/193697
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Add a new @completePartial note that does not require you to specify
the full list of completions. This gets rid of a lot of noise when you
just want to test the relative order of some completion candidates but
don't care about all the other candidates in scope.
I changed one existing test to use @completePartial as an example.
Change-Id: I56005405477e562803f094c0cac05ef2b854ad1a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/192657
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Remove the wantSuggestedFixes flag, and run the flagged code
by default.
Add test cases for suggested fixes.
Generate a suggested fix to the assign analysis that suggests removing redundant assignments.
Fix the propagation of suggested fixes (using rstambler's code).
Change-Id: I342c8e0b75790518f228b00ebd2979d24338be3b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/193265
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
CL 193726 accidentally turned off deep completions and fuzzy matching by default.
Re-enabling them now.
Change-Id: Ia120766b3a72243efe9c398c0efd6d1a101d0e7f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/194020
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Improve the existing fix-the-AST code to better identify the
expression following the "go" or "defer" keywords:
- Don't slurp the expression start outside the loop since the
expression might only have a single token.
- Set expression end to the position after the final token, not the
position of the final token.
- Track curly brace nesting to properly capture an entire "func() {}"
expression.
- Fix parent node detection to work when BadStmt isn't first statement
of block.
- Add special case to detect dangling period, e.g. "defer fmt.". We
insert phantom "_" selectors like go/parser does to prevent the
dangling "." from messing up the AST.
- Use reflect in offsetPositions so it updates positions in all node
types. This code shouldn't be called often, so I don't think
performance is a concern.
I also tweaked the function snippet code so it properly expands
"defer" and "go" expressions to function calls. It thought it didn't
have to expand since there was already a *ast.CallExpr, but the
CallExpr was faked by us and the source doesn't actually contain the
"()" calling parens.
Note that this does not work for nested go/defer statements. For
example, completions won't work properly in cases like this:
go func() {
defer fmt.<>
}
I think we can fix this as well with some more work.
Change-Id: I8f9753fda76909b0e3a83489cdea69ad04ee237a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/193997
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Downranking builtins causes weird interplay with other completion
candidates due to fuzzy matching. For example:
notNil := 123
var foo *int = nil<>
ranks "notNil" before "nil" in the builtin list, which is counter
productive.
Change it to not downrank builtins. In my testing with this change,
builtins never were ranked above lexical items with similar names. I
think this is because the "natural" order of completion items puts
builtins last, and we stable sort items by score, so their relative
order is preserved.
Change-Id: Ifbad02be205e3cb26c1d4ce500b77690e7ac5b04
Reviewed-on: https://go-review.googlesource.com/c/tools/+/193897
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The next in the sequence of CLs to convert to using protocol positions.
Change-Id: Ib3421bfc73af1b546b60c328ca66528cb9031e19
Reviewed-on: https://go-review.googlesource.com/c/tools/+/193719
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This cl is the first in a set that change the configuration behaviour.
This one should have no behaviour differences, but makes a lot of preparatory changes.
The same options are set to the same values in the same places.
The options are now stored on the Session instead of the Server
The View supports options, but does not have any yet.
Change-Id: Ie966cceca6878861686a1766d63bb8a78021259b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/193726
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Folding ranges need to be computed to present folding ranges that make
sense when lineFoldingOnly is true. This change computes the folding
ranges to include the lines that are contained within the start and end
parenthesis/braces when applicable.
Folding ranges are not returned when the contained nodes begin or end on
the same lines as the parenthesis/brace. This is to avoid misleading
folding ranges like the following in unformatted code:
if true {
fmt.Println("true") } else {
fmt.Println("false")
}
---folding "if true {}"--->
if true {
fmt.Println("false")
}
Change-Id: I2931d02837ad5f2dd96cc93da5ede59afd6bcdce
Reviewed-on: https://go-review.googlesource.com/c/tools/+/192678
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This feature has been in an experimental state for a long enough time
that I think we can enable it by default at master.
Change-Id: I9bbb8b41377719f0e97f608f6e5163a883a176b3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/192259
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
If the client registers with foldingRange.lineFoldingOnly = true, only
return folding ranges that span multiple lines. Do this as they are
computed, so that if other filtering is applied later, we do not include
ranges that would go unused by the client anyway.
Change-Id: I27ea24428d25f180e26892de0f6d16c211225bf7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/192477
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
FoldingRanges may be nested. Test nested folding ranges by separating
out the folding ranges by nested level and checking each level.
Change-Id: I12c72daa3e6c6b9d4959209b3a41b27e2b59866f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/192398
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The existing implementation did not suggest struct field names
when running completion from within a slice literal of
pointers. Now, struct field names are suggested in that case.
Fixesgolang/go#33211
Change-Id: I6028420a9a789846b070fcc6e45ec89dc4d898d4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/192277
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Invert "useDeepCompletions" config flag to "disableDeepCompletion" and
separate out "disableFuzzyMatching" which reverts to the previous
prefix matching behavior.
I separated fuzzy matching tests out to a separate file so they aren't
entangled with deep completion tests. In coming up with representative
test cases I found a couple issues which I fixed:
- We were treating a fuzzy matcher score of 0 as no match, but the
matcher returns 0 for candidates that match but have no bonuses. I
changed the matcher interface so that a score of 0 counts as a
match. For example, this was preventing a pattern of "o" from
matching "foo".
- When we lower a candidate's score based on its depth, we were
subtracting a static multiplier which could result in the score
going negative. A negative score messes up future score weighting
because multiplying it by a value in the range [0, 1) makes it
bigger instead of smaller. Fix by scaling a candidate's score based
on its depth rather than subtracting a constant factor.
Updates golang/go#32754
Change-Id: Ie6f9111f1696b0d067d08f7eed7b0a338ad9cd67
Reviewed-on: https://go-review.googlesource.com/c/tools/+/192137
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Prepare rename gets the range of the identifier to rename. Returns an
error when there is no identifier to rename.
Change-Id: I5e5865bc9ff97e6a95ac4f0c48edddcfd0f9ed67
Reviewed-on: https://go-review.googlesource.com/c/tools/+/191170
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Deep completions can take a long time (500ms+) if there are many
large, deeply nested structs in scope. To make sure we return
completion results in a timely manner we now notice if we have spent
"too long" searching for deep completions and reduce the search scope.
In particular, our overall completion budget is 100ms. This value is
often cited as the longest latency that still feels instantaneous to
most people. As we spend 25%, 50%, and 75% of our budget we limit our
deep completion candidate search depth to 4, 3, and 2,
respectively. If we hit 90% of our budget, we disable deep completions
entirely.
In my testing, limiting the search scope to 4 normally makes even
enormous searches finish in a few milliseconds. Of course, you can
have arbitrarily many objects in scope with arbitrarily many fields,
so to cover our bases we continue to dial down the search depth as
needed.
I replaced the "enabled" field with a "maxDepth" field that disables
deep search when set to 0.
Change-Id: I9b5a07de70709895c065503ae6082d1ea615d1af
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190978
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Now we register for and handle didChangeWatchedFiles "change"
events. We don't handle "create" or "delete" yet.
When a file changes on disk, there are two basic cases. If the editor
has the file open, we want to ignore the change since we need to
respect the file contents in the editor. If the file isn't open in the
editor then we need to re-type check (and re-diagnose) any packages it
belongs to.
We will need special handling of go.mod changes, but start with
just *.go files for now.
I'm putting the new behavior behind an initialization flag while it is
under development.
Updates golang/go#31553
Change-Id: I81a767ebe12f5f82657752dcdfb069c5820cbaa0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190857
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change allows renamings of the name of an import spec.
Since there is not always explicit identifier available to select and
rename, allow renaming packages from positions within the import spec.
Change-Id: I0a8aaa92c26e1795ddb9c31a1165b2f2ee89aa34
Reviewed-on: https://go-review.googlesource.com/c/tools/+/191165
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
When there is an explicit name for an import spec, treat it as its own
identifier, separate from the import path.
Example:
import h "hello"
The name h is defined in that import spec, not in the package hello
it contains its own references. If asked about a position within the
import path, continue treating that as referencing the imported package.
If the position is within the name, use the identifier there that is
local to that file.
This change allows for go to definition of the explicit name to point to
itself, find all references from the import spec, and rename the
explicit name from the import spec.
Change-Id: Ia1d927a26e73f2dc450d256d71909c006bdf4c37
Reviewed-on: https://go-review.googlesource.com/c/tools/+/191164
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Since renaming an identifier within an import spec is not yet supported,
return an error when this is encountered. These idents from the import
spec have a nil declaration object.
Import paths that contain '.' or '/' are caught by the valid identifier check
avoiding the crash, but import paths such as "fmt" are not as fmt is a
valid identifier. This change checks if i.decl.obj is nil and returns an error
if it is to avoid the crash.
Fixesgolang/go#33768
Change-Id: I4e757b42bedffd648fc821590e4a383826200dc3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/191163
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Optimize a few things to speed up deep completions:
- item() is slow, so don't call it unless the candidate's name matches
the input.
- We only end up returning the top 3 deep candidates, so skip deep
candidates early if they are not in the top 3 scores we have seen so
far. This greatly reduces calls to item(), but also avoids a
humongous sort in lsp/completion.go.
- Get rid of error return value from found(). Nothing checked for this
error, and we spent a lot of time allocating the only possible error
"this candidate is not accessible", which is not unexpected to begin
with.
- Cache the call to types.NewMethodSet in methodsAndFields(). This is
relatively expensive and can be called many times for the same type
when searching for deep completions.
- Avoid calling deepState.chainString() twice by calling it once and
storing the result on the candidate.
These optimizations sped up my slow completion from 1.5s to
0.5s. There were around 200k deep candidates examined for this one
completion. The remaining time is dominated by the fuzzy
matcher. Obviously 500ms is still unacceptable under any
circumstances, so there will be subsequent improvements to limit the
deep completion search scope to make sure we always return completions
in a reasonable amount of time.
I also made it so there is always a "matcher" set on the
completer. This makes the matching logic a bit simpler.
Change-Id: Id48ef7031ee1d4ea04515c828277384562b988a8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190522
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
this moves the actual diff algorithm into a different package and then provides hooks so it can be easily replaced with an alternate algorithm.
Change-Id: Ia0359f58878493599ea0e0fda8920f21100e16f1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190898
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Test that having a comment at the start of a file allows imports
to be added correctly.
Updates golang/go#33721
Change-Id: Id1673c2509537413710b73261ad2a59afe06b93f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190800
Run-TryBot: Suzy Mueller <suzmue@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Insert imports into existing multiline import declarations when
possible.
Logic for choosing where to insert taken from
golang.org/x/tools/go/ast/astutil.
Change-Id: Ie5ad96d5e3d5db2e92a2c05a6104d14a4a192ed3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190598
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Unimported packages may be suggested as completion items. Since these
are not yet imported, they should be ranked lower than other candidates.
They also require an additional import statement to be valid, which is
provided as an AdditionalTextEdit.
Adding this import does not use astutil.AddNamedImport, to avoid
editing the current ast and work even if there are errors. Additionally,
it can be hard to determine what changes need to be made to the source
document from the ast, as astutil.AddNamedImport includes a merging
pass. Instead, the completion item simply adds another import
declaration.
Change-Id: Icbde226d843bd49ee3713cafcbd5299d51530695
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190338
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This is the first in a series of many changes that will change the API
of the source package to use different types for positions. Using
token.Pos is particularly fragile, since the pos has to refer to the
specific *ast.File from which it was derived.
Change-Id: I70c9b806f7dd45b2e229954ebdcdd86e2cf3bbbb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190340
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Rename checks all of the packages that may be affected for conflicts. An
error in any of them leads to renaming error. Returning errors from
multiple packages may be confusing (for example, when there is a test
variant of a package and the same error appears twice). This change
stops after an error is found and returns that error instead of
continuing to search.
Change-Id: Ifba1feddbf8829d3aad30309154d578967e05a36
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190416
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
this shuffles things so there a single exporter API rather than an observer
It also removes most of the globals.
per telemetry type.
Change-Id: Iaa82abe2ded1fff9df8e067ed4a55bcbd9d9591f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190405
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
This change will just make it a bit easier to debug the context
cancellation errors.
Change-Id: I580751ac04e3357031678eb31914828029c96e4b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190412
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This is a straight move of some code with no changes.
It splits the part of the telemetry code that will become a standalone library from the bit that belongs in the lsp.
Change-Id: Icedb6bf1f3711da9251450531729984df6df7787
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190403
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This fix adds all packages to the renamer packages map.
Renaming performs checks on each package to make sure there are no
conflicts. If there are multiple packages, each package needs to be
checked. The packages were being incorrectly added to the map and were
all being put under a single key.
Fixesgolang/go#33664
Change-Id: I68466ce34ac49b700ce6d14ce0b53e2795926fa9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190399
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
