- Remove "Draft" disclaimer. We're not done but the spec
is in usable shape with respect to generics features.
- Remove section on "Earlier version" and fold information
into the "Intro" section.
- Remove caveat for shifts: the rules for arithmetic operators
on type parameters apply for them as well.
- Simply state that we don't support arguments of type parameter
type for the built-ins real, imag, and complex.
Fixes#51182.
Change-Id: I6df1427de685cfe7055b64e91753aa7ebff70565
Reviewed-on: https://go-review.googlesource.com/c/go/+/391695
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
- Change section title from "Type parameters lists" to
"Type parameter declarations" as the enclosing section
is about declarations.
- Correct section on parsing ambiguity in type parameter
lists.
- Rephrase paragraphs on type parameters for method receivers
and adjust examples.
- Remove duplicate prose in section on function argument type
inference.
- Clarified "after substitution" column in Instantiations section.
Change-Id: Id76be9804ad96a3f1221e5c4942552dde015dfcb
Reviewed-on: https://go-review.googlesource.com/c/go/+/390994
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Specific types were introduced to explain rules for operands of
type parameter type. Specific types are really an implementation
mechanism to represent (possibly infinite) type sets in the machine;
they are not needed in the specification.
A specific type is either standing for a single named or unnamed
type, or it is the underlying (unnamed) type of an infinite set of
types. Each rule that applies to a type T of the set of specific
types must also apply to all types T' in the type set for which T
is a representative of. Thus, in the spec we can simply refer to
the type set directly, infinite or not.
Rather then excluding operands with empty type sets in each instance,
leave unspecified what happens when such an operand is used. Instead
give an implementation some leeway with an implementation restriction.
(The implementation restriction also needs to be formulated for types,
such as in conversions, which technically are not "operands". Left for
another CL.)
Minor: Remove the two uses of the word "concrete" to refer to non-
interface types; instead just say "non-interface type" for clarity.
Change-Id: I67ac89a640c995369c9d421a03820a0c0435835a
Reviewed-on: https://go-review.googlesource.com/c/go/+/390694
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Type inference for types was always a "nice to have" feature.
Given the under-appreciated complexity of making it work in all
cases, and the fact that we don't have a good understanding of
how it might affect readability of generic code, require explicit
type arguments for generic types.
This matches the current implementation.
Change-Id: Ie7ff6293d3fbea92ddc54c46285a4cabece7fe01
Reviewed-on: https://go-review.googlesource.com/c/go/+/390577
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This change includes several smaller changes based on feedback
received so far.
These changes were reviewed at CL 385536. The only additional
change here is to the current date in the subtitle.
Change-Id: I653eb4a143e3b86c5357a2fd3b19168419c9f432
Reviewed-on: https://go-review.googlesource.com/c/go/+/390634
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For #51153
Change-Id: I4374c63498b62ba7a08f146eebd034cbd50623f6
Reviewed-on: https://go-review.googlesource.com/c/go/+/389634
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
This template is based on CL 342070 and previous ones like it.
Continue to eagerly include often-used sections, and clarify that
the TODO is about completing the section, or removing if it turns
out not to be needed.
Move the Go 1.18 release notes to x/website, since that's the new
home for past Go release notes as of CL 291711. They're added to
x/website in CL 388556.
For #51400
Updates #47694
Change-Id: I7b5213e039ad6e14a7ff7ad486311efcecc06824
Reviewed-on: https://go-review.googlesource.com/c/go/+/388515
Trust: Carlos Amedee <carlos@golang.org>
Run-TryBot: Carlos Amedee <carlos@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Alex Rakoczy <alex@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
The Go 1 compatibility guarantee permits us to break code if there is
a specification error or a bug. Emphasize that for generics.
Change-Id: I8379a14cdab9f63bb747e961ca12d1adecfc2eb4
Reviewed-on: https://go-review.googlesource.com/c/go/+/388454
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
For #45964
Change-Id: Ic66502c50ca328e944c91e710dca6c8dbc168e4f
Reviewed-on: https://go-review.googlesource.com/c/go/+/387855
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Matt Layher <mdlayher@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The tag was "go-mod-vendor", which doesn't match the content.
Also move that section later, so "go mod" sections stay together.
For #47694.
Change-Id: Id4fa7ee0768682a9aadfeb1b2f1d723e7521896b
Reviewed-on: https://go-review.googlesource.com/c/go/+/387354
Trust: Cherry Mui <cherryyz@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Updates #47694
Change-Id: I6c1c3698fdd55fe83c756f28776d1d26dba0a9df
Reviewed-on: https://go-review.googlesource.com/c/go/+/386974
Trust: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
sed 's/the/that/g'
Change-Id: I3f539817b055d54b0ec99346555ac91b756d9ed6
GitHub-Last-Rev: 2e7df1c346
GitHub-Pull-Request: golang/go#51267
Reviewed-on: https://go-review.googlesource.com/c/go/+/386854
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Dmitri Shuralyov <dmitshur@golang.org>
This change removes the -workfile flag and allows the go.work file path
to be set using GOWORK (which was previously read-only). This removes
the potential discrepancy and confusion between the flag and environment
variable.
GOWORK will still return the actual path of the go.work file found if it
is set to '' or 'auto'. GOWORK will return 'off' if it is set to 'off'.
For #45713Fixes#51171
Change-Id: I72eed65d47c63c81433f2b54158d514daeaa1ab3
Reviewed-on: https://go-review.googlesource.com/c/go/+/385995
Trust: Michael Matloob <matloob@golang.org>
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
The (temporary) highlights will make it easier to review the spec
in formatted form as opposed to html text.
Added a missing rule about the use of adjusted core types for
constraint type inference.
Adjusted rule for invalid embedding of interface types.
Change-Id: Ie573068d2307b66c937e803c486724175415b9c6
Reviewed-on: https://go-review.googlesource.com/c/go/+/385535
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change moves the relevant prose of the section on type parameters
into the section on type parameter lists and eliminates the former.
With this change, the section on types now exclusively describes all
Go composite types.
User-defined named types (defined types and type parameters) are
described with their declarations.
Change-Id: I3e421cd236e8801d31a4a81ff1e5ec9933e3ed20
Reviewed-on: https://go-review.googlesource.com/c/go/+/385037
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Also, fixed several closing header tags and removed a duplicate "the".
(Thanks to @hopehook and Hossein Zolfi for pointing these out.)
Change-Id: I85a40ba44b8570a578bce8d211dcc5ea3901fb1e
Reviewed-on: https://go-review.googlesource.com/c/go/+/385036
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The outcome of type inference depends critically on when function
argument type inference stops processing arguments. Describe this
and explain an example with some detail.
Also: In the section on the built-in function delete, refer to the
value rather than the type of the second argument, as it may be an
untyped constant.
Change-Id: Ice7fbb33f985afe082380b8d37eaf763238a3818
Reviewed-on: https://go-review.googlesource.com/c/go/+/385034
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I6de236442f213ab4b4f19ec881add4923d8bfd8d
Reviewed-on: https://go-review.googlesource.com/c/go/+/385054
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Kevin Burke <kevin@burke.dev>
A basic interface is a classical Go interface containing only
methods or embedding basic interfaces.
Use this to simplify rule about what interfaces may be used
where. The term "basic interface" will also be useful when
talking about various interfaces in general.
Fix rule restricting union terms: as it was written it also
excluded interface terms with non-empty method sets due to
embedded non-interface types with methods.
Split the large section on interfaces into three smaller
pieces by introducing section titles.
Change-Id: I142a4d5609eb48aaa0f7800b5b85c1d6c0703fcb
Reviewed-on: https://go-review.googlesource.com/c/go/+/384994
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This makes the prose easier to read while being just as precise.
Change-Id: Ie46c6c5042f419de9fdeb1c75bb72b5a40c37073
Reviewed-on: https://go-review.googlesource.com/c/go/+/384774
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
This change only shuffles sections for better organization; there
are no other changes except title and link adjustments.
Until now, the sections on underlying types and method sets were
immediately following the introduction of types. As it becomes
necessary to introduce the notion of a core type more centrally,
the natural place is immediately following the section on underlying
types. All together, these sections, immediately after the introduction
of types, would distract from purpose of the section on types, which
is to introduce the various types that Go offers.
The more natural place for the definition of underlying, core, and
specific types is the section on properties of types and values.
To accomplish this, the section on the structure of interfaces is
split into a section on core types and one on specific types, and
the various sections are reorganized appropriately.
The new organization of the section on types now simply introduces
all Go types as follows:
- boolean types
- numeric types
- string types
- array types
- slice types
- struct types
- pointer types
- function types
- interface types
- map types
- channel types
- type parameters
The new organization of the section on properties of types and values
is as follows:
- underlying types
- core types
- specific types
- type identity
- assignability
- representability
- method sets
Change-Id: I59e4d47571da9d4c89d47d777f5353fb1c5843e6
Reviewed-on: https://go-review.googlesource.com/c/go/+/384623
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Includes a few minor cosmetic changes.
Change-Id: I6c307d958b47d83671142688630ea7835168439f
Reviewed-on: https://go-review.googlesource.com/c/go/+/384622
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
These TODOs were originally removed in CL 368794.
Updates #47694
Change-Id: I39d5c0ce5f96adbbc466585a5831f721057dbed5
Reviewed-on: https://go-review.googlesource.com/c/go/+/384619
Trust: Carlos Amedee <carlos@golang.org>
Run-TryBot: Carlos Amedee <carlos@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Fixes#51110.
Change-Id: I11370417f1ef435b05dfab18eeabc2c3c1b7b8a1
Reviewed-on: https://go-review.googlesource.com/c/go/+/384674
Trust: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Add corresponding rules and a couple of examples.
Fixes#50202.
Change-Id: I4287b5e2d0fd29a0c871795e07f1bb529c9c6004
Reviewed-on: https://go-review.googlesource.com/c/go/+/384240
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change in terminology prevents potential confusion
that migth be caused by associating "structural type"
with "structural typing"; the two are not connected.
Also, adjusted introductory paragraph of section on
constraint type inference: type inference goes in both
directions, from type parameter to core type and vice
versa. The previous description was not quite accurate.
Change-Id: If4ca300f525eea660f68486302619aa6ad5dbc2c
Reviewed-on: https://go-review.googlesource.com/c/go/+/384238
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For #47694.
Change-Id: I5f6850e171f574a5342671778df854dc68a5148f
Reviewed-on: https://go-review.googlesource.com/c/go/+/384554
Trust: Carlos Amedee <carlos@golang.org>
Run-TryBot: Carlos Amedee <carlos@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Alex Rakoczy <alex@golang.org>
Trust: Alex Rakoczy <alex@golang.org>
Run-TryBot: Alex Rakoczy <alex@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
The terms "integer type", "floating-point type", and "complex type"
are used frequently in the spec but are not explicitly (only indirectly)
defined.
Slightly rephrased the section on numeric types and introduce these
terms explicitly. Add links to this section.
Change-Id: I3fb888933bece047da8b356b684c855618e9aee4
Reviewed-on: https://go-review.googlesource.com/c/go/+/384157
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I119cfb1a0da9af89ced78935b8fcdfdb8d9b4ab6
Reviewed-on: https://go-review.googlesource.com/c/go/+/383794
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
It has moved to golang.org/x/exp/constraints. Perhaps it will move
back to the standard library in a future release.
For golang/go#45458Fixesgolang/go#50792
Change-Id: I93aa251a7afe7b329a3d3faadc0c5d6388b1f0e9
Reviewed-on: https://go-review.googlesource.com/c/go/+/382460
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
For #47694.
For #50912.
For #50937.
Change-Id: I3fae6c8dbbd61a45e669b8fb0c18ac76f2183963
Reviewed-on: https://go-review.googlesource.com/c/go/+/381967
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: Ic338788d6410ed0d09ad129811377ee9ce5ed496
Reviewed-on: https://go-review.googlesource.com/c/go/+/367954
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This reverts CL 380854.
Per the conluding discussions on #50791. A follow-up will
document `comparable` more thoroughly.
For #50791.
Change-Id: I15db9051784a012f713e28d725c3b8bbfeb40569
Reviewed-on: https://go-review.googlesource.com/c/go/+/381076
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Mostly from CL 367954.
Change-Id: Id003b0f785a286a1a649e4d6e8c87d0418a36545
Reviewed-on: https://go-review.googlesource.com/c/go/+/379920
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This reverts CL 376414.
For #47694.
For #50481.
Change-Id: Ie73961046e52e6e5d3262ef0aeaa24bec7eaa937
Reviewed-on: https://go-review.googlesource.com/c/go/+/379835
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
It was removed in CL 378576.
For #50501
Change-Id: I26b8f0e99a40fa5c616aa4849a6ab15dd0d072f8
Reviewed-on: https://go-review.googlesource.com/c/go/+/379314
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Introduce a (local) notion of a set of representative types,
which serves as a representation/approximation of an
interface's actual type set. If the set of representative
types is is non-empty and finite, it corresponds to the set
of specific types of the interface.
In the implementation, the set of representative types serves
as a finite representation of an interface's type set, together
with the set of methods.
Change-Id: Ib4c6cd5e17b81197672e4247be9737dd2cb6b56f
Reviewed-on: https://go-review.googlesource.com/c/go/+/376834
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For #47694.
Change-Id: I00862f987a0ff9f71e0295ce4320e6f9a6a4332f
Reviewed-on: https://go-review.googlesource.com/c/go/+/376414
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Problem pointed out on golang-nuts mailing list.
Change-Id: If1c9b22e1ed7b4ec7ebcaadc80fa450333e6856c
Reviewed-on: https://go-review.googlesource.com/c/go/+/375799
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The release notes explicitly refer to sections updated
for generics in the spec but then point to the old spec
which is very confusing for beta users.
For #47694
Change-Id: I5b555db3543cc32f088a8b267ec3f1195a52a812
Reviewed-on: https://go-review.googlesource.com/c/go/+/373174
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The change clarifies in the release notes for go1.18 that the variable
is for compilation and references the microarchitecture description in
the Go Wiki,
https://golang.org/wiki/MinimumRequirements#amd64,
and references the same information in the output of go help
environment.
Fixes#50174
Change-Id: I6a7d5a06f48463a810c96cc9c76fe66113d5147c
Reviewed-on: https://go-review.googlesource.com/c/go/+/372194
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
For #47694
For #48052
Change-Id: I136be9b498033309d876099aae16bad330555416
Reviewed-on: https://go-review.googlesource.com/c/go/+/373774
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
For #47694
Sorry about that! I guess the autocompleter in VSCode auto-closed the paragraph and I didn't notice.
Change-Id: I1e834e47deb708cd5285d26201a442305f8c3b24
GitHub-Last-Rev: ab88731551
GitHub-Pull-Request: golang/go#50305
Reviewed-on: https://go-review.googlesource.com/c/go/+/374014
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Dmitri Shuralyov <dmitshur@golang.org>
For #47694
Change-Id: I9f4838100741d3ba13e9374e70466fa405c6e4d2
Reviewed-on: https://go-review.googlesource.com/c/go/+/372634
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
For #47694
Change-Id: I9af871a4a45b002e72629904011aac8f076617f1
Reviewed-on: https://go-review.googlesource.com/c/go/+/372974
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The new description matches the implementation (CL 370774).
Also, in the section on type constraints, use "defines" instead of
"determines" because the constraint interface defines the type set
which is precisely the set of acceptable type arguments.
For #49482.
Change-Id: I6f30f49100e8ba8bec0a0f1b450f88cae54312eb
Reviewed-on: https://go-review.googlesource.com/c/go/+/372874
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For #49602.
Change-Id: I0d3ff8f087dffb3409918494147fd1dceff7514d
Reviewed-on: https://go-review.googlesource.com/c/go/+/372694
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For #47694
Change-Id: Ibf38eabcb78abc563fcf77e2b566175a18c06fa3
Reviewed-on: https://go-review.googlesource.com/c/go/+/372114
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
In release notes for Go 1.18, fix typo in changes for package testing to
correctly document the change in CL 343883.
Change-Id: I40d92858ed3f74554a094466c06771f83dd81942
Reviewed-on: https://go-review.googlesource.com/c/go/+/371616
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Cherry Mui <cherryyz@google.com>
It is a new package and seems a major change.
Updates #47694.
Change-Id: If854e494e28bcd1e79c99e59119755b9cb6793d6
Reviewed-on: https://go-review.googlesource.com/c/go/+/371816
Trust: Cherry Mui <cherryyz@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
There doesn't seem anything that still needs to de done there.
Updates #47694.
Change-Id: I7909f566638332f3904d20a34f61d371af1d2da2
Reviewed-on: https://go-review.googlesource.com/c/go/+/371754
Trust: Cherry Mui <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Trust: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Alex Rakoczy <alex@golang.org>
As written, the conversion P(x), where P and the type
of x are type parameters with identical underlying types
(i.e., identical constraints), is valid. However, unless
the type of x and P are identical (which is covered with
the assignability rule), such a conversion is not valid
in general (consider the case where both type parameters
are different type parameters with constraint "any").
This change adjusts the rules to prohibit type parameters
in this case. The same reasoning applies and the analogue
change is made for pointer types.
The type checker already implements these updated rules.
Change-Id: Id90187900cb2820f6a0a0cf582cf26cdf8addbce
Reviewed-on: https://go-review.googlesource.com/c/go/+/371074
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
cmd/vet has several precision improvements for the checkers copylock, printf, sortslice, testinggoroutine, and tests. Adds a high level mention in the release notes and an example of string constant concatenation.
Updates #47694
Change-Id: I7a342a57ca3fd9e2f3e8ec99f7b647269798317f
Reviewed-on: https://go-review.googlesource.com/c/go/+/370734
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Trust: Tim King <taking@google.com>
Run-TryBot: Tim King <taking@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Also update some other go/types release notes to use the present tense.
Updates #47694
Change-Id: I654371c065e76fd5d22679d0d3c1a81bc3d1e513
Reviewed-on: https://go-review.googlesource.com/c/go/+/370235
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This CL reorders the bullet points in the generics section to more
closely match what I think users will consider most important. I put
the ~ token before the mention of ~T in interfaces to avoid a forward
reference, though I wonder if we actually want to spent a couple more
sentences saying what union and ~T types are, since most people are
going to care about that a lot more than they care about the low-level
detail that there's a new token.
For #47694.
Change-Id: Ib84f096ef6346a711801268ce362b64fa423d3f2
Reviewed-on: https://go-review.googlesource.com/c/go/+/369734
Trust: Austin Clements <austin@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
NewTypeList was not part of the go/types API proposal, and was left in
by accident. It also shouldn't be necessary, so remove it.
Updates #47916
Change-Id: I4db3ccf036ccfb708ecf2c176ea4921fe68089a4
Reviewed-on: https://go-review.googlesource.com/c/go/+/369475
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
For #47694
Change-Id: Iee4fda069a56ea4436b8aa32e2605f3349d7c154
Reviewed-on: https://go-review.googlesource.com/c/go/+/369334
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Also, move it up in the document.
Updates #47694
Change-Id: I927c4c845089a5c22e2c5b5f3de1831c04c6d990
Reviewed-on: https://go-review.googlesource.com/c/go/+/369102
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The number of involved CLs is too large (hundreds) so
no CLs are mentioned in (html) comments.
Updates #47694
Change-Id: I655d800a1e56a71e9d70a190f1c42c17baf6861e
Reviewed-on: https://go-review.googlesource.com/c/go/+/369099
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Also make a few small formatting fixes.
Change-Id: Iad99d030312393af3b6533f2cd00f09aea0f2a7d
Reviewed-on: https://go-review.googlesource.com/c/go/+/369074
Trust: Katie Hockman <katie@golang.org>
Run-TryBot: Katie Hockman <katie@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
For #44853
For #47694
Change-Id: Ia76246218b1361d8bdf510bbfc5178c83cdd3eec
Reviewed-on: https://go-review.googlesource.com/c/go/+/368834
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
This is based off Michael's notes.
Updates #47694
Change-Id: I6e7944f85b776e8481829a2fafd177a49557c6ca
Reviewed-on: https://go-review.googlesource.com/c/go/+/368156
Trust: Jeremy Faller <jeremy@golang.org>
Run-TryBot: Jeremy Faller <jeremy@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
This description is based on https://golang.org/cl/321490.
Updates #47694
Change-Id: I48656cd487d2fccf0b0d3390f350f1bc6f2b0080
Reviewed-on: https://go-review.googlesource.com/c/go/+/365738
Trust: Jeremy Faller <jeremy@golang.org>
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Run-TryBot: Jeremy Faller <jeremy@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Change-Id: I562d4648756e710020ee491f3801896563a89baa
Reviewed-on: https://go-review.googlesource.com/c/go/+/367395
Trust: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
We want to support some special cases for index expressions, len, and
cap on operands of type parameters (such as indexing a value constrained
by byte slices and strings), hence the extra rules.
Change-Id: I4a07dc7e64bb47361b021d606c52eae1784d5430
Reviewed-on: https://go-review.googlesource.com/c/go/+/366814
Trust: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
- fix definition of "specific types" and add more examples
- state that a parameterized function must be instantiated
when used as a function value
- remove duplicate word ("can can" -> "can")
Thanks to @danscales for finding these.
Change-Id: Ideb41efc35a3e67694d3bc97e462454feae37c44
Reviewed-on: https://go-review.googlesource.com/c/go/+/367394
Trust: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
For #47694.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Change-Id: I38c2fd9b57fbbacf220a2bc679f67e2dfdcc7cb1
Reviewed-on: https://go-review.googlesource.com/c/go/+/367514
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
This change corrects the link `Instantiantions` to `Instantiations` in the spec.
Change-Id: Ib0ed03420ae401d20af1ea723c5487018b2f462d
GitHub-Last-Rev: b84316c818
GitHub-Pull-Request: golang/go#49816
Reviewed-on: https://go-review.googlesource.com/c/go/+/367274
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Change-Id: I11111b3617673be94508128489aed6488d518537
Reviewed-on: https://go-review.googlesource.com/c/go/+/366834
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I5ffc7f26236487070447eaa0f6b14d1fab44c3c7
Reviewed-on: https://go-review.googlesource.com/c/go/+/366794
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I2770da87b4c977b51dfa046f2f08283917675e1c
Reviewed-on: https://go-review.googlesource.com/c/go/+/365916
Trust: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Change-Id: I7bfddf4be0d1d95419f312bb349ae2e16b74b795
Reviewed-on: https://go-review.googlesource.com/c/go/+/365915
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I3c4d8bdb5e92ee7fdca9593fb043f94f467755e8
Reviewed-on: https://go-review.googlesource.com/c/go/+/365434
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I4423a059527066c4418c195911f8184dfd3f5a15
Reviewed-on: https://go-review.googlesource.com/c/go/+/365914
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The notion of specific types will be used to define rules for
assignability, convertability, etc. when type parameters are
involved.
Change-Id: Ic5c134261e2a9fe05cdf25efd342f052458ab5c8
Reviewed-on: https://go-review.googlesource.com/c/go/+/366754
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Thanks to @danscales for noticing the mistake.
Change-Id: I547ee80a78419765b82d39d7b34dc8d3bf962c35
Reviewed-on: https://go-review.googlesource.com/c/go/+/366215
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Fixes#49214.
For #47694.
Change-Id: Iba68ed17bfd81890309b6a6732087f87a03e1350
Reviewed-on: https://go-review.googlesource.com/c/go/+/366274
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change introduces the notion of a structural interface
and its corresponding structural type.
Change-Id: Ib5442dfd04cb5950b4467428cae51849f8922272
Reviewed-on: https://go-review.googlesource.com/c/go/+/365474
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
- add section on type parameters
- added two sections on the scope of type parameters
- expanded general section on types accordingly
- introduced the notion of a named type which will
help in simplifying various rules (subsequent CLs)
Change-Id: I49c1ed7d6d4f951d751f0a3ca5dfb637e49829f2
Reviewed-on: https://go-review.googlesource.com/c/go/+/365414
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I29e9188a0fa1326c2755a9b86aeb47feaa8019be
Reviewed-on: https://go-review.googlesource.com/c/go/+/365274
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
- fixed a typo in the method set section
- express in the syntax that ~T denotes an underlying type
- be more precise when talking about types vs type terms
- refer to "unions" rather than "union expressions"
- make it clear in the spec title that this is WIP
Change-Id: I9b2c4b1f77bc50dd574ed6893bedd40529c320fc
Reviewed-on: https://go-review.googlesource.com/c/go/+/365154
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is the first of several CLs that update the existing
Go 1.17 spec for type parameters.
This CL updates the section on method sets and interface types.
It also adds "any", "comparable" to the list of predeclared
identifiers.
Change-Id: I0ce25dc02791c33150c0d949528512610faf3eab
Reviewed-on: https://go-review.googlesource.com/c/go/+/362999
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Also mention local types restriction.
We probably want to say more at some point, this is just a
placeholder to start.
Update #47631
Change-Id: I828e451e1e8504d21cb55c7132e9cb330b160a54
Reviewed-on: https://go-review.googlesource.com/c/go/+/364134
Trust: Keith Randall <khr@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
For #47694
Change-Id: I39594c273aeb038702457587ee1c46e4b3920bb6
Reviewed-on: https://go-review.googlesource.com/c/go/+/363359
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Trust: Jeremy Faller <jeremy@golang.org>
Thanks for jtagcat@ for finding this.
Change-Id: If7324808edbae19ec8bf503b04e0426f3fb3b47a
Reviewed-on: https://go-review.googlesource.com/c/go/+/363394
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This PR adds a note into the Go 1.18 changelog for CL 330852.
Updates #46923.
Change-Id: I99150e9275ce23fcf3697d6a22ac216818223c74
GitHub-Last-Rev: b2772ce68b
GitHub-Pull-Request: golang/go#49258
Reviewed-on: https://go-review.googlesource.com/c/go/+/360297
Trust: Roland Shoemaker <roland@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
For #47327
Change-Id: I50418c0d017c4e90a2c13d26945ee639079e4e33
Reviewed-on: https://go-review.googlesource.com/c/go/+/363174
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Paschalis Tsilias <paschalistsilias@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This will allow us to compare the changes made for Go 1.18.
Change-Id: I1456270b201967f5cb05e66cec556939e6e33265
Reviewed-on: https://go-review.googlesource.com/c/go/+/362894
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Updates #48367.
Change-Id: Ib8fc6d9dd7c3c6a70fefe077615f51a71d9c42ed
Reviewed-on: https://go-review.googlesource.com/c/go/+/361899
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Dmitri Shuralyov <dmitshur@golang.org>
A small touchup after CL 361894.
For #47694.
Change-Id: Ifc161516f897f727195d21351a3c8eda7b6e327e
Reviewed-on: https://go-review.googlesource.com/c/go/+/361895
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Carlos Amedee <carlos@golang.org>
For #47694.
Change-Id: Ia80a1859bd0fc6f08d27293f519c22fd9a804fd2
Reviewed-on: https://go-review.googlesource.com/c/go/+/361894
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Trust: Carlos Amedee <carlos@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
In modules that specify 'go 1.17' or higher, the go.mod file
explicitly requires modules for all packages transitively imported by
the main module. Users tend to use 'go mod download' to prepare for
testing the main module itself, so we should only download those
relevant modules.
In 'go 1.16' and earlier modules, we continue to download all modules
in the module graph (because we cannot in general tell which ones are
relevant without loading the full package import graph).
'go mod download all' continues to download every module in
'go list all', as it did before.
Fixes#44435
Change-Id: I3f286c0e2549d6688b3832ff116e6cd77a19401c
Reviewed-on: https://go-review.googlesource.com/c/go/+/357310
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
This reverts CL 359096.
Updates #47788.
Reason for revert: -buildmode=shared may have actually been working in a few very specific cases. We should not remove -buildmode=shared until we have implemented an alternative to support those few cases.
Change-Id: Ia962b06abacc11f6f29fc29d092773be175e32f1
Reviewed-on: https://go-review.googlesource.com/c/go/+/359575
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Change-Id: I032791a3cda1916099b0fd2955dcca4e69763660
Reviewed-on: https://go-review.googlesource.com/c/go/+/357958
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
It never worked in module mode (or with a read-only GOROOT).
A proposal to drop it was filed (and approved) in
https://golang.org/issue/47788.
Fixes#47788
Change-Id: I0c12f38eb0c5dfe9384fbdb49ed202301fa4273d
Reviewed-on: https://go-review.googlesource.com/c/go/+/359096
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Mention future versions will require the COMPAT_FREEBSD12 kernel option
set in the kernel.
For #47694.
Change-Id: Ia94c4f9dbb38c68025d3c1d12dd2e241a5480a6b
Reviewed-on: https://go-review.googlesource.com/c/go/+/354971
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
For #43684
Change-Id: I9ce47de82203ec87e7d3683f56e6c6d61ae255f5
Reviewed-on: https://go-review.googlesource.com/c/go/+/352151
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
gofmt is pretty heavily CPU-bound, since parsing and formatting 1MiB
of Go code takes much longer than reading that amount of bytes from
disk. However, parsing and manipulating a large Go source file is very
difficult to parallelize, so we continue to process each file in its
own goroutine.
A Go module may contain a large number of Go source files, so we need
to bound the amount of work in flight. However, because the
distribution of sizes for Go source files varies widely — from tiny
doc.go files containing a single package comment all the way up to
massive API wrappers generated by automated tools — the amount of
time, work, and memory overhead needed to process each file also
varies. To account for this variability, we limit the in-flight work
by bytes of input rather than by number of files. That allows us to
make progress on many small files while we wait for work on a handful
of large files to complete.
The gofmt tool has a well-defined output format on stdout, which was
previously deterministic. We keep it deterministic by printing the
results of each file in order, using a lazily-synchronized io.Writer
(loosly inspired by Haskell's IO monad). After a file has been
formatted in memory, we keep it in memory (again, limited by the
corresponding number of input bytes) until the output for all previous
files has been flushed. This adds a bit of latency compared to
emitting the output in nondeterministic order, but a little extra
latency seems worth the cost to preserve output stability.
This change is based on Daniel Martí's work in CL 284139, but using a
weighted semaphore and ephemeral goroutines instead of a worker pool
and batches. Benchmark results are similar, and I find the concurrency
in this approach a bit easier to reason about.
In the batching-based approach, the batch size allows us to "look
ahead" to find large files and start processing them early. To keep
the CPUs saturated and prevent stragglers, we would need to tune the
batch size to be about the same as the largest input files. If the
batch size is set too high, a large batch of small files could turn
into a straggler, but if the batch size is set too low, the largest
files in the data set won't be started early enough and we'll end up
with a large-file straggler.
One possible alternative would be to sort by file size instead of
batching: identify all of the files to be processed, sort from largest
to smallest, and then process the largest files first so that the
"tail" of processing covers the smallest files. However, that approach
would still fail to saturate available CPU when disk latency is high,
would require buffering an arbitrary amount of metadata in order to
sort by size, and (perhaps most importantly!) would not allow the
`gofmt` binary to preserve the same (deterministic) output order that
it has today.
In contrast, with a semaphore we can produce the same deterministic
output as ever using only one tuning parameter: the memory footprint,
expressed as a rough lower bound on the amount of RAM available per
thread. While we're below the memory limit, we can run arbitrarily
many disk operations arbitrarily far ahead, and process the results of
those operations whenever they become avaliable. Then it's up to the
kernel (not us) to schedule the disk operations for throughput and
latency, and it's up to the runtime (not us) to schedule the
goroutines so that they complete quickly.
In practice, even a modest assumption of a few megabytes per thread
seems to provide a nice speedup, and it should scale reasonably even
to machines with vastly different ratios of CPU to disk. (In practice,
I expect that most 'gofmt' invocations will work with files on at most
one physical disk, so the CPU:disk ratio should vary more-or-less
directly with the thread count, whereas the CPU:memory ratio is
more-or-less independent of thread count.)
name \ time/op baseline.txt 284139.txt simplified.txt
GofmtGorootCmd 11.9s ± 2% 2.7s ± 3% 2.8s ± 5%
name \ user-time/op baseline.txt 284139.txt simplified.txt
GofmtGorootCmd 13.5s ± 2% 14.4s ± 1% 14.7s ± 1%
name \ sys-time/op baseline.txt 284139.txt simplified.txt
GofmtGorootCmd 465ms ± 8% 229ms ±28% 232ms ±31%
name \ peak-RSS-bytes baseline.txt 284139.txt simplified.txt
GofmtGorootCmd 77.7MB ± 4% 162.2MB ±10% 192.9MB ±15%
For #43566
Change-Id: I4ba251eb4d188a3bd1901039086be57f0b341910
Reviewed-on: https://go-review.googlesource.com/c/go/+/317975
Trust: Bryan C. Mills <bcmills@google.com>
Trust: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Thanks to @bodar (Github) for finding this.
Fixes#48422.
Change-Id: I031c3d82a02db1d204e2b86b494d89784d37f073
Reviewed-on: https://go-review.googlesource.com/c/go/+/350409
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
CL 85215 added prose to provide some minimal intuition for the
definition of a "terminating statement". While the original definition
was perfectly fine, the added prose was actually incorrect: If the
terminating statement is a goto, it might jump to a labeled statement
following that goto in the same block (it could be the very next
statement), and thus a terminating statement does not in fact
"prevent execution of all statements that lexically appear after
it in the same block".
Rather than explaining the special case for gotos with targets that
are lexically following the goto in the same block, this CL opts for
a simpler approach.
Thanks to @3bodar (Github) for finding this.
Fixes#48323.
Change-Id: I8031346250341d038938a1ce6a75d3e687d32c37
Reviewed-on: https://go-review.googlesource.com/c/go/+/349172
Trust: Robert Griesemer <gri@golang.org>
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I33bde4835d3b83fafd55beea483f6236c4c62840
Reviewed-on: https://go-review.googlesource.com/c/go/+/338990
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Than McIntosh <thanm@google.com>
So it's clear to the reader that if "M" is a promoted method from
embedded field "T", then "x.M" will be expanded to "x.T.M" during the
evaluation of the method value.
Fixes#47863
Change-Id: Id3b82127a2054584b6842c487f6e15c3102dc9fe
Reviewed-on: https://go-review.googlesource.com/c/go/+/344209
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This CL adds a new syscall.SyscallN API.
The proposal discussion also suggests the API should not only for
Windows but other platforms. However, the existing API set already
contain differences between platforms, hence the CL only implements
the Windows platform.
Moreover, although the API offers variadic parameters, the permitted
parameters remains up to a limit, which is selected as 42, and arguably
large enough.
Fixes#46552
Change-Id: I66b49988a304d9fc178c7cd5de46d0b75e167a4f
Reviewed-on: https://go-review.googlesource.com/c/go/+/336550
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Trust: Matthew Dempsky <mdempsky@google.com>
Trust: Jason A. Donenfeld <Jason@zx2c4.com>
This template is based on CL 295209 and previous ones like it.
Continue to eagerly include often-used sections, and clarify that
the TODO is about completing the section, or removing if it turns
out not to be needed.
Move the Go 1.17 release notes to x/website, since that's the new
home for past Go release notes as of CL 291711. They're added to
x/website in CL 342089.
For #47694
Updates #44513
Change-Id: I24962eed800d1509bdf71b7d7f819a683eb96f8f
Reviewed-on: https://go-review.googlesource.com/c/go/+/342070
Trust: Carlos Amedee <carlos@golang.org>
Run-TryBot: Carlos Amedee <carlos@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
The current text is slightly inaccurate. Make it more correct.
Change-Id: Iebe0051b74649d13982d7eefe3697f9e69c9b75d
Reviewed-on: https://go-review.googlesource.com/c/go/+/340449
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Damien Neil <dneil@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Fixes#44513.
Change-Id: I82c44a681b1fa67df123af86ee02a980b13acdc8
Reviewed-on: https://go-review.googlesource.com/c/go/+/341673
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Trust: Carlos Amedee <carlos@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
Run-TryBot: Carlos Amedee <carlos@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
For #22446
Change-Id: I71a30761a28e81c50b7089d5a28be99c736c2dc8
Reviewed-on: https://go-review.googlesource.com/c/go/+/341332
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
The current document uses the "top" and "bottom" when talking
about the address within a frame, which may easily lead to
misunderstandings. This patch directly uses "high address"
and "low address" to make the expression clearer.
Change-Id: I7469330bbdc158672d7f0314fe6680ebdd9ab79a
Reviewed-on: https://go-review.googlesource.com/c/go/+/339369
Trust: fannie zhang <Fannie.Zhang@arm.com>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Writing CL 333629 clarified my thinking about the behavioral changes
associated with lazy loading. There are really two interrelated
changes — graph pruning, and lazy loading proper — that are both made
possible by the added redundancy in the go.mod file.
(I had initially approached the whole cluster of features as “lazy
loading” because that was the starting point for the design. Graph
pruning came into the picture when we looked at how to bound the
worst-case behavior of lazy loading, but it is really the more
important of the two aspects of the design.)
Note that this change adds links to doc anchors added in CL 333629.
Fixes#36460Fixes#47397
Change-Id: I0ef4af57f647bf5ee210ea7099191fb4befa2cc1
Reviewed-on: https://go-review.googlesource.com/c/go/+/335135
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
There is an example for nil slice already, so adding example for non-nil
zero length slice, too, clarifying to the reader that the result is also
non-nil and different from nil slice case.
Updates #395
Change-Id: I019db1b1a1c0c621161ecaaacab5a4d888764b1a
Reviewed-on: https://go-review.googlesource.com/c/go/+/336890
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Updates #44513
Change-Id: Ia0c6b48bde2719f3a99cb216b6166d82159198d1
Reviewed-on: https://go-review.googlesource.com/c/go/+/336930
Trust: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For #395
For #46746
Change-Id: I4bfc094cf1cecd27ce48e31f92384cf470f371a6
Reviewed-on: https://go-review.googlesource.com/c/go/+/334669
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
For #46229
Change-Id: I54d01d90f2b0c892d76121f1350c0e8cf4b2772f
Reviewed-on: https://go-review.googlesource.com/c/go/+/334729
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
For #19367
Change-Id: If0ff8ddba3b6b48e2e198cf3653e73284c7572a3
Reviewed-on: https://go-review.googlesource.com/c/go/+/332409
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
These types already implemented the Image interface. They should also
implement the RGBA64Image interface (new in Go 1.17)
Updates #44808
Change-Id: I9a2b13e305997088ae874efb95ad9e1648f94812
Reviewed-on: https://go-review.googlesource.com/c/go/+/331570
Trust: Nigel Tao <nigeltao@golang.org>
Run-TryBot: Nigel Tao <nigeltao@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Add unsafe.Add and unsafe.Slice to the list of built-in functions
which are not permitted in statement context. The compiler and
type checker already enforce this restriction, this just fixes
a documentation oversight.
For #19367.
For #40481.
Change-Id: Iabc63a8db048eaf40a5f5b5573fdf00b79d54119
Reviewed-on: https://go-review.googlesource.com/c/go/+/329925
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Rob Pike <r@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
For #46366
Change-Id: I8417e6e4dbb8cb56ff7afc16893a01b7bb938217
Reviewed-on: https://go-review.googlesource.com/c/go/+/329529
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Documents the mode added in CL 306149 to skip object resolution.
Fixes#46298
Change-Id: I6a14aaa00790f9f7e4e4ba17033355f5e878d74b
Reviewed-on: https://go-review.googlesource.com/c/go/+/329009
Trust: Robert Findley <rfindley@google.com>
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The new RGBA64At method is equivalent to the existing At method (and the
new SetRGBA64 method is equivalent to the existing Set method in the
image/draw package), but they can avoid allocations from converting
concrete color types to the color.Color interface type.
Also update api/go1.17.txt and doc/go1.17.html
Fixes#44808
Change-Id: I8671f3144512b1200fa373840ed6729a5d61bc35
Reviewed-on: https://go-review.googlesource.com/c/go/+/311129
Trust: Nigel Tao <nigeltao@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
"Results" may sound like the results from the previous sentence.
Reword to "function return values" for clarity.
Suggested by Tobias Kohlbau.
Change-Id: Ie78df36b5b191b06e98b802f9a46db6d067a8ea0
Reviewed-on: https://go-review.googlesource.com/c/go/+/327774
Trust: Cherry Mui <cherryyz@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Tobias Kohlbau <tobias@kohlbau.de>
Simplify and remove forward-compatibility reference, as OpenBSD 6.9 has
already been released (1st of May 2021).
Updates #44513
Change-Id: I0a1abbb397f31d15c80a970edaa9723f894cafa9
Reviewed-on: https://go-review.googlesource.com/c/go/+/327652
Trust: Joel Sing <joel@sing.id.au>
Reviewed-by: Cherry Mui <cherryyz@google.com>
It was the only h3 in <code>, and it lacked <p> around its content.
It looked like it was part of the prior section:
https://tip.golang.org/doc/go1.17#gofmt
Change-Id: I7e9ef70e9a03474225833f44420aabd70dab3cd5
Reviewed-on: https://go-review.googlesource.com/c/go/+/326774
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Trust: Brad Fitzpatrick <bradfitz@golang.org>
As far as I can tell the Core Library section is complete. Remove its
TODO.
Change-Id: Ia84c6656fac045e25fae1a7ce8b488a3a26fd250
Reviewed-on: https://go-review.googlesource.com/c/go/+/326469
Trust: Heschi Kreinick <heschi@google.com>
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Damien Neil <dneil@google.com>
In 1.17, //go:build lines are fully supported. This entails changes to
the go command, vet, and gofmt. Document all of them.
I'm not Russ, but this is a significant change, it slipped under the
radar, and we're trying to get the release out. So here's what I got.
I wasn't sure where to put the go command change. On the one hand,
it's pretty significant. On the other, it certainly affects fewer
people than lazy loading. So it probably shouldn't be first, but I also
didn't want to bury it the middle of all the other module changes. Open
to suggestions.
Change-Id: Ia1a96bcfb1977973c5b0b0a6b18a9242a745af12
Reviewed-on: https://go-review.googlesource.com/c/go/+/326209
Trust: Heschi Kreinick <heschi@google.com>
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
I'm not aware of anything more to mention for ports.
Change-Id: I686df8a230a55ad7f4c5eae43ca27f85fad9dd84
Reviewed-on: https://go-review.googlesource.com/c/go/+/326409
Trust: Cherry Mui <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
These vet checks were added in CL 299532 and CL 321389.
Also adds a TODO for buildtags.
Change-Id: I516dc77729f6d2dc147318260fe452831b115dfa
Reviewed-on: https://go-review.googlesource.com/c/go/+/322769
Trust: Tim King <taking@google.com>
Run-TryBot: Tim King <taking@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Re-apply the doc part of CL 324471, originally written by Felix Geisendörfer.
Change-Id: I831bead9a385bc5a5eed3058649a25ef17373bc6
Reviewed-on: https://go-review.googlesource.com/c/go/+/326171
Trust: Cherry Mui <cherryyz@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
This reverts CL 324471 (commit 689f4c7415).
Reason for revert: break ~all builders. And it is not a doc-only change.
Change-Id: Iadbdda34d2ca476a9f5e6c2d3a28592ed7ccb067
Reviewed-on: https://go-review.googlesource.com/c/go/+/326170
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
In both net.ParseIP and net.ParseCIDR reject leading zeros in the
dot-decimal notation of IPv4 addresses.
Fixes#30999Fixes#43389
Change-Id: I2b6a31fe84db89ac828cf5ed03eaa586ee96ab68
Reviewed-on: https://go-review.googlesource.com/c/go/+/325829
Trust: Roland Shoemaker <roland@golang.org>
Trust: Katie Hockman <katie@golang.org>
Run-TryBot: Roland Shoemaker <roland@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Reviewed-by: Katie Hockman <katie@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Fixes#46020.
Change-Id: Iadf9a0ac4a8863e17155d6ba1af2cc497634a634
Reviewed-on: https://go-review.googlesource.com/c/go/+/325870
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
The word "specifier" is used once only here and technically not defined.
Change-Id: Ifc9f0582f4eb3c3011ba60d8008234de511d4be6
Reviewed-on: https://go-review.googlesource.com/c/go/+/323730
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Ian Lance Taylor <iant@golang.org>
Trust: Robert Griesemer <gri@golang.org>
Replace "reserved word" by "keyword" as the latter is the official term.
Change-Id: I9f269759b872026034a9f47e4a761cff2d348ca0
Reviewed-on: https://go-review.googlesource.com/c/go/+/323729
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Ian Lance Taylor <iant@golang.org>
Trust: Robert Griesemer <gri@golang.org>
Documents the newly implemented changes of
- Time.IsDST() method
- Addition of Time.UnixMilli, Time.UnixMicro and to-Time helpers UnixMicro, UnixMilli methods
- Addition of comma "," support as separator for fraction seconds
For #44513Fixes#46026
Change-Id: Ib8d3449d3b061f013112d33362b50e68ad6ddffa
Reviewed-on: https://go-review.googlesource.com/c/go/+/317913
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Also delete the TODO for the linker section.
Updates #44513.
Updates #40724.
Change-Id: I4d62a907e8c3070831a052cdfe1e21648698df12
Reviewed-on: https://go-review.googlesource.com/c/go/+/323289
Trust: Cherry Mui <cherryyz@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Documents the newly added mode that skips type checking
functions as per CL 301493.
Fixes#46025
For #34652
For #44513
For #38627
Change-Id: I56c4f65924702a931944796e39f43cfeb66abc8a
Reviewed-on: https://go-review.googlesource.com/c/go/+/311569
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Trust: Michael Knyszek <mknyszek@google.com>
For #44513
Change-Id: I8c0070b116ee520a76726eb9d3dcbdd489a1fb1f
Reviewed-on: https://go-review.googlesource.com/c/go/+/323351
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
For #44513
Change-Id: Ib21af742e574fcaa7e38bb437d42dbeed9d01f0b
Reviewed-on: https://go-review.googlesource.com/c/go/+/323350
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
For #44513.
Fixes#46019.
Change-Id: Ica84edd5703a4ccf343ff01e10483f8d51d1c79f
Reviewed-on: https://go-review.googlesource.com/c/go/+/323069
Trust: Damien Neil <dneil@google.com>
Run-TryBot: Damien Neil <dneil@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes#46023
Change-Id: Ia63829d03afb0936862b16f0971175cbaa1095bc
Reviewed-on: https://go-review.googlesource.com/c/go/+/322890
Trust: Damien Neil <dneil@google.com>
Run-TryBot: Damien Neil <dneil@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For #44513.
Fixes#46013.
Change-Id: I382603208aa94b66d5220cf0f418b8528a4e4148
Reviewed-on: https://go-review.googlesource.com/c/go/+/322892
Trust: Damien Neil <dneil@google.com>
Run-TryBot: Damien Neil <dneil@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Also add a link to the time.Time type and adjust the wording a bit.
Change-Id: I2f4210ada6d253eb5804e6327b2432487beb8a05
Reviewed-on: https://go-review.googlesource.com/c/go/+/321811
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Changes include:
* ReadRequest function now returns an error when a request has multiple
Host headers.
For #44513.
Updates #46015.
Change-Id: I48ea7c5cee3f1d1a247035fd37191362a53d1f04
Reviewed-on: https://go-review.googlesource.com/c/go/+/317914
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Trust: Heschi Kreinick <heschi@google.com>
'go mod download' without arguments is frequently used to populate the
module cache. It tends to fetch a lot of extra files (for modules in
the build list that aren't needed to build packages in the main
module). It's annoying when sums are written for these extra files.
'go mod download mod@version' will still write sums for specific
modules in the build list. 'go mod download all' still has the
previous behavior.
For now, all invocations of 'go mod download' still update go.mod and
go.sum with changes needed to load the build list (1.15 behavior).
Fixes#45332
Change-Id: I9e17d18a7466ac7271a0e1a2b663f6b3cb168c97
Reviewed-on: https://go-review.googlesource.com/c/go/+/318629
Trust: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Documents the changes to File.WriteString method.
For #44513.
Fixes#46018.
Change-Id: I3a8ef9df9f84662614d54802710bd705d626b995
Reviewed-on: https://go-review.googlesource.com/c/go/+/317910
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Trust: Cherry Mui <cherryyz@google.com>
It was misplaced by the relnote tool.
Also add a TODO for CL 312212, per discussion in golang.org/issue/46020.
For #44513.
For #46020.
Change-Id: I8d766df969f85c351ead18df3e45adb6fb27b7a0
Reviewed-on: https://go-review.googlesource.com/c/go/+/317829
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
During the TLS handshake if the server doesn't support any of the
application protocols requested by the client, send the
no_application_protocol alert and abort the handshake on the server
side. This enforces the requirements of RFC 7301.
Change-Id: Iced2bb5c6efc607497de1c40ee3de9c2b393fa5d
Reviewed-on: https://go-review.googlesource.com/c/go/+/289209
Trust: Roland Shoemaker <roland@golang.org>
Trust: Katie Hockman <katie@golang.org>
Run-TryBot: Roland Shoemaker <roland@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
CL 317273 accidentally grouped a fix for bufio, bytes, strings
packages into a single entry, but they should be separate ones.
Fix that, and document these negative rune handling fixes.
The list of fixed functions in package unicode was computed by
taking the functions covered by the new TestNegativeRunes test,
and including those that fail when tested with Go 1.16.3.
For #44513.
Updates #43254.
Change-Id: I6f387327f83ae52543526dbdcdd0bb5775c678bd
Reviewed-on: https://go-review.googlesource.com/c/go/+/317469
Reviewed-by: David Benjamin <davidben@google.com>
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Trust: Alexander Rakoczy <alex@golang.org>
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Run-TryBot: Alexander Rakoczy <alex@golang.org>
For #44513.
For #23011.
Change-Id: Ic092e38da3601a43d7e2110f500db4a6a6f845f5
Reviewed-on: https://go-review.googlesource.com/c/go/+/316889
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
We were already setting GIT_SSH_COMMAND (if unset) to explicitly
include 'ControlMaster=no' in order to disable connection pooling.
Now we also set 'BatchMode=yes' to suppress password prompts for
password-protected keys.
While we're here, we also set GCM_INTERACTIVE=never to suppress
similar prompts from the Git Credential Manager for Windows.
Fixes#44904
Change-Id: Iebb050079ff7dd54d5b944c459ae212e9e6f2579
Reviewed-on: https://go-review.googlesource.com/c/go/+/300157
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Previously calling fmt.Sprintf("%#v", t) on a time.Time value would
yield a result like:
time.Time{wall:0x0, ext:63724924180, loc:(*time.Location)(nil)}
which does not compile when embedded in a Go program, and does not
tell you what value is represented at a glance.
This change adds a GoString method that returns much more legible
output:
"time.Date(2009, time.February, 5, 5, 0, 57, 12345600, time.UTC)"
which gives you more information about the time.Time and also can be
usefully embedded in a Go program without additional work.
Update Quote() to hex escape non-ASCII characters (copying logic
from strconv), which makes it safer to embed them in the output of
GoString().
Fixes#39034.
Change-Id: Ic985bafe4e556f64e82223c643f65143c9a45c3b
Reviewed-on: https://go-review.googlesource.com/c/go/+/267017
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Emmanuel Odeke <emmanuel@orijtech.com>
In order to prevent edit wars with previous cmd/go releases,
the new version annotations are only included if the main module
specifies 'go 1.17' or higher.
Fixes#36876
Change-Id: Iba15e47dd1ac2c16d754679a9b501db4069fa250
Reviewed-on: https://go-review.googlesource.com/c/go/+/315409
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
This change adds two possible upgrade paths for lazy loading:
1. Run 'go mod tidy -go=1.17'.
2. Starting in a module with no existing 'go' directive,
run any 'go' command that updates the go.mod file.
In the latter case, commands other than 'go mod tidy'
may leave the go.mod file *very* untidy if it had non-trivial
dependencies. (The 'go' invocation will promote all
implicit eager dependencies to explicit lazy ones,
which preserves the original module graph — most of which is
not actually relevant.)
'go mod tidy -go=1.17' can be used to enable lazy loading without
accidentally downgrading existing transitive dependencies.
'go mod tidy -go=1.16' can be used to disable lazy loading and clear
away redundant roots in a single step (if reducing the go version), or
to prune away dependencies of tests-of-external-tests (if increasing
the go version).
'go mod tidy -go=1.15' can be used to add dependencies of
tests-of-external-tests, although there isn't much point to that.
DO NOT MERGE
This change still needs an explicit test and a release note.
Fixes#45094
For #36460
Change-Id: I68f057e39489dfd6a667cd11dc1e320c1ee1aec1
Reviewed-on: https://go-review.googlesource.com/c/go/+/315210
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
This change activates the dormant “lazy loading” codepaths added in CL
265777 and its predecessors. Dependencies of modules that declare 'go
1.17' or higher are loaded lazily, and the dependencies in the go.mod
file maintain additional invariants to support more efficient lazy
loading for downstream dependent modules.
See https://golang.org/design/36460-lazy-module-loading for the
detailed design.
For #36460
Change-Id: Ic12ee7842aef9580357fcf8909d87654fcb2ad12
Reviewed-on: https://go-review.googlesource.com/c/go/+/314634
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
1. The existing prose implied that a switch expression type must
be comparable because it is tested for equality against all case
expressions. But for an empty switch (no case expressions), it
was not clear if the switch expression needed to be comparable.
Require it to match the behavior of compiler and type checkers.
2. While making this change, remove redundant language explaining
what happens with untyped boolean switch expression values: the
default type of an untyped boolean value is bool, this is already
covered by the first part of the relevant sentence.
Fixes#43200.
Change-Id: Id8e0f29cfa8722b57cd2b7b58cba85b58c5f842b
Reviewed-on: https://go-review.googlesource.com/c/go/+/314411
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Rob Pike <r@golang.org>
A non-trivial Cgo program may need to use callbacks and interact with
go objects per goroutine. Because of the rules for passing pointers
between Go and C, such a program needs to store handles to associated
Go values. This often causes much extra effort to figure out a way to
correctly deal with: 1) map collision; 2) identifying leaks and 3)
concurrency.
This CL implements a Handle representation in runtime/cgo package, and
related methods such as Value, Delete, etc. which allows Go users can
use a standard way to handle the above difficulties.
In addition, the CL allows a Go value to have multiple handles, and the
NewHandle always returns a different handle compare to the previously
returned handles. In comparison, CL 294670 implements a different
behavior of NewHandle that returns a unique handle when the Go value is
referring to the same object.
Benchmark:
name time/op
Handle/non-concurrent-16 487ns ± 1%
Handle/concurrent-16 674ns ± 1%
Fixes#37033
Change-Id: I0eadb9d44332fffef8fb567c745246a49dd6d4c1
Reviewed-on: https://go-review.googlesource.com/c/go/+/295369
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Cherry Zhang <cherryyz@google.com>
Then, write the 'go.mod' file with that version before further
processing. That way, if the command errors out due to a change in
behavior, the reason for the change in behavior will be visible in the
file diffs.
If the 'go.mod' file cannot be written (due to -mod=readonly or
-mod=vendor), assume Go 1.11 instead of the current Go release.
(cmd/go has added 'go' directives automatically, including in 'go mod
init', since Go 1.12.)
For #44976
Change-Id: If9d4af557366f134f40ce4c5638688ba3bab8380
Reviewed-on: https://go-review.googlesource.com/c/go/+/302051
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
In Go1.13 and above, signed integers are permitted as shift counts as long as they are >=0.
However, the comments in the "Arithmetic operators" section says shift operators accept "unsigned integer" as of right operands. Replacing this with "integer>=0" resolves the misunderstanding that shift
operators permit only unsigned integers.
Reference: Go1.13 Release Notes: https://golang.org/doc/go1.13
Change-Id: Icd3c7734d539ab702590e992a618c9251c653c37
GitHub-Last-Rev: 4f263a48d3
GitHub-Pull-Request: golang/go#44664
Reviewed-on: https://go-review.googlesource.com/c/go/+/297249
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
Trust: Robert Griesemer <gri@golang.org>
Adds the (*tls.Conn).HandshakeContext method. This allows
us to pass the context provided down the call stack to
eventually reach the tls.ClientHelloInfo and
tls.CertificateRequestInfo structs.
These contexts are exposed to the user as read-only via Context()
methods.
This allows users of (*tls.Config).GetCertificate and
(*tls.Config).GetClientCertificate to use the context for
request scoped parameters and cancellation.
Replace uses of (*tls.Conn).Handshake with (*tls.Conn).HandshakeContext
where appropriate, to propagate existing contexts.
Fixes#32406
Change-Id: I259939c744bdc9b805bf51a845a8bc462c042483
Reviewed-on: https://go-review.googlesource.com/c/go/+/295370
Run-TryBot: Johan Brandhorst-Satzkorn <johan.brandhorst@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Katie Hockman <katie@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Change-Id: I453d06da2f596eb0b99905aec46a05547d73c62c
Reviewed-on: https://go-review.googlesource.com/c/go/+/290872
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
Trust: Robert Griesemer <gri@golang.org>
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
This template is based on CL 248198 and previous ones like it.
Continue to eagerly include often-used sections, and clarify that
the TODO is about completing the section, or removing if it turns
out not to be needed.
Move the Go 1.16 release notes to x/website, since that's the new
home for past Go release notes as of CL 291711. They're added to
x/website in CL 295249.
'relnote -html' does not report any CLs with RELNOTE annotations
since 2021/02/01.
For #44513.
Updates #40700.
Change-Id: Idd389335500ec4dec2764cbbaa385918cc8a79ad
Reviewed-on: https://go-review.googlesource.com/c/go/+/295209
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
Updates #40700
Change-Id: Ifff622ccadaa31c0c0684c3c695aadcaa2305623
Reviewed-on: https://go-review.googlesource.com/c/go/+/294669
Trust: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The spec states that a type "may" have a method set associated with it.
Yet every type has a method set, which may be empty. This is clarified
later in the same paragraph. Be clear in the first sentence as well.
Per the suggestion from https://github.com/DQNEO.
Fixes#44318.
Change-Id: I6097b1c7062853e404b7fead56d18a7f9c576fc3
Reviewed-on: https://go-review.googlesource.com/c/go/+/292853
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes#40700.
Change-Id: I99ed479d1bb3cdf469c0209720c728276182a7a9
Reviewed-on: https://go-review.googlesource.com/c/go/+/291809
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
Trust: Alexander Rakoczy <alex@golang.org>
Run-TryBot: Alexander Rakoczy <alex@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
They have moved to x/website in CL 291693.
The docs that are left are the ones that are edited at the same time
as development in this repository and are tied to the specific version
of Go being developed. Those are:
- the language spec
- the memory model
- the assembler manual
- the current release's release notes
Change-Id: I437c4d33ada1b1716b1919c3c939c2cacf407e83
Reviewed-on: https://go-review.googlesource.com/c/go/+/291711
Trust: Russ Cox <rsc@golang.org>
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
These live in x/website/content/doc now.
The copies here just attract edits that have no actual effect.
For #40496.
For #41861.
Change-Id: I2fdd7375e373949eb9a88f4cdca440b6a5d45eea
Reviewed-on: https://go-review.googlesource.com/c/go/+/291709
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
For #43985
Change-Id: I1a16f66800c5c648703f0a0d2ad75024525a710f
Reviewed-on: https://go-review.googlesource.com/c/go/+/291389
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
A caller is not always in a function.
For example, a call can appear in top level declarations.
e.g. var x = f()
Change-Id: I29c4c3b7663249434fb2b8a6d0003267c77268cf
Reviewed-on: https://go-review.googlesource.com/c/go/+/290849
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Robert Griesemer <gri@golang.org>
This vet check was added in CL 243397.
For #40700.
Change-Id: Ibff6df9395d37bb2b84a791443578009f23af4fb
GitHub-Last-Rev: e47c38f630
GitHub-Pull-Request: golang/go#44147
Reviewed-on: https://go-review.googlesource.com/c/go/+/290330
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Add missed heading tag in CL 276373.
For #40700
Change-Id: Ida9e8861589bbc296a5a1cecbf9fe33fa09ed0ca
GitHub-Last-Rev: d218f8d4b7
GitHub-Pull-Request: golang/go#44111
Reviewed-on: https://go-review.googlesource.com/c/go/+/289869
Reviewed-by: Tim King <taking@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Trust: Tim King <taking@google.com>
Trust: Dmitri Shuralyov <dmitshur@golang.org>
The example, var v, ok T1 = x.(T), can be interpreted as type T1 interface{} or type T = bool; type T1 = T.
Separating the example would help understanding for readers.
Change-Id: I179f4564e67f4d503815d29307df2cebb50c82f9
GitHub-Last-Rev: b34fffb6bb
GitHub-Pull-Request: golang/go#44040
Reviewed-on: https://go-review.googlesource.com/c/go/+/288472
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Robert Griesemer <gri@golang.org>
For #40700
For #41184Fixes#43957
Change-Id: Ia346f4cf160431b721efeba7dc5f1fb8814efd95
Reviewed-on: https://go-review.googlesource.com/c/go/+/287472
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
A parenthesis of go list "-f" flag format is double curly braces.
Change-Id: Ifd38e0b0ae3c46272a4acd65584818228168b7c6
GitHub-Last-Rev: b46030492b
GitHub-Pull-Request: golang/go#43924
Reviewed-on: https://go-review.googlesource.com/c/go/+/286752
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Currently the only mention of go_asm.h is buried in a confusing
section about the runtime-specific go_tls.h header. We actually want
people to use go_asm.h, so this CL adds a section with a proper
discussion of this header. As part of this, we remove the discussion
of go_asm.h from the go_tls.h section and clean up what remains.
I stumbled on this when working on the internal ABI specification. I
wanted to refer to stable documentation on how to access struct fields
from assembly and found there was none.
Change-Id: I0d53741e7685e65794611939e76285f7c82e1d65
Reviewed-on: https://go-review.googlesource.com/c/go/+/286052
Trust: Austin Clements <austin@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
For #40700
Change-Id: If105d2f043539bb0893f577a984f14ee3e7ca753
Reviewed-on: https://go-review.googlesource.com/c/go/+/285212
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Rerank editor plugins based on popularity (Go 2019 survey), and remove
Atom, as it is no longer popular.
Change-Id: I06d39b67eec24a920439b9ea1198b6e2a939874e
Reviewed-on: https://go-review.googlesource.com/c/go/+/283073
Trust: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Proposal #40281 was initially accepted, but has now been declined.
This CL removes most of the work done to implement it.
Specifically this reverts CLs 248341, 274448, 274474, and 278392.
For #40281
For #43226
Change-Id: I5a9ebb4d9cb5fb0962434b64c59beb8343030be5
Reviewed-on: https://go-review.googlesource.com/c/go/+/281515
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
golang.org/cl/251878 disallowed non-ASCII characters in import paths,
in module mode. They were already disallowed in module paths, so this
change just extended the restriction to the package subdirectory of
the module. Update the release notes to alert users of this change.
Fixes#43052
Change-Id: I1caf9ef978dd3ac599a3f82c5c376ad62e6fc436
Reviewed-on: https://go-review.googlesource.com/c/go/+/282194
Trust: Michael Matloob <matloob@golang.org>
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
In general, we don't want to encourage reading them from CSRs, and
applications that really want to can parse the Extensions field.
Note that this also fixes a bug where the error of
parseKeyUsageExtension was not handled in parseCertificateRequest.
Fixes#43477
Updates #37172
Change-Id: Ia5707b0e23cecc0aed57e419a1ca25e26eea6bbe
Reviewed-on: https://go-review.googlesource.com/c/go/+/281235
Trust: Filippo Valsorda <filippo@golang.org>
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Roland Shoemaker <roland@golang.org>
What a year it has been. If there's one thing we can count on
at a time like this, it's that 2021 is the Year of the Gopher.
Change-Id: I4f6fbbe3d9b4b70df8fadd0d18237f05cd572265
Reviewed-on: https://go-review.googlesource.com/c/go/+/280163
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
A fix for a trivial (yet still confusing for neophytes like me!) typo in
contribute.html.
Change-Id: Ic68673fb2a3855c2b9e8042047087450e8793e6b
Reviewed-on: https://go-review.googlesource.com/c/go/+/279452
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
For #40700.
Change-Id: I67dd55b435304e428929c9a54b8881f9b78efdfb
Reviewed-on: https://go-review.googlesource.com/c/go/+/278392
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The path package doesn't have a Glob function. Adjust the release notes
re. CL 264397 accordingly.
Also add links to the documentation of all mentioned functions.
For #40700.
Change-Id: Ibf3e0530fa6fab36a3f6fbc664f0800869ce9ec7
Reviewed-on: https://go-review.googlesource.com/c/go/+/278213
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
For #40700.
Change-Id: I616429f82a44cea32701ed0af6e42ed6c71ee097
Reviewed-on: https://go-review.googlesource.com/c/go/+/277378
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
