Then, write the 'go.mod' file with that version before further
processing. That way, if the command errors out due to a change in
behavior, the reason for the change in behavior will be visible in the
file diffs.
If the 'go.mod' file cannot be written (due to -mod=readonly or
-mod=vendor), assume Go 1.11 instead of the current Go release.
(cmd/go has added 'go' directives automatically, including in 'go mod
init', since Go 1.12.)
For #44976
Change-Id: If9d4af557366f134f40ce4c5638688ba3bab8380
Reviewed-on: https://go-review.googlesource.com/c/go/+/302051
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
In Go1.13 and above, signed integers are permitted as shift counts as long as they are >=0.
However, the comments in the "Arithmetic operators" section says shift operators accept "unsigned integer" as of right operands. Replacing this with "integer>=0" resolves the misunderstanding that shift
operators permit only unsigned integers.
Reference: Go1.13 Release Notes: https://golang.org/doc/go1.13
Change-Id: Icd3c7734d539ab702590e992a618c9251c653c37
GitHub-Last-Rev: 4f263a48d3
GitHub-Pull-Request: golang/go#44664
Reviewed-on: https://go-review.googlesource.com/c/go/+/297249
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
Trust: Robert Griesemer <gri@golang.org>
Adds the (*tls.Conn).HandshakeContext method. This allows
us to pass the context provided down the call stack to
eventually reach the tls.ClientHelloInfo and
tls.CertificateRequestInfo structs.
These contexts are exposed to the user as read-only via Context()
methods.
This allows users of (*tls.Config).GetCertificate and
(*tls.Config).GetClientCertificate to use the context for
request scoped parameters and cancellation.
Replace uses of (*tls.Conn).Handshake with (*tls.Conn).HandshakeContext
where appropriate, to propagate existing contexts.
Fixes#32406
Change-Id: I259939c744bdc9b805bf51a845a8bc462c042483
Reviewed-on: https://go-review.googlesource.com/c/go/+/295370
Run-TryBot: Johan Brandhorst-Satzkorn <johan.brandhorst@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Katie Hockman <katie@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Change-Id: I453d06da2f596eb0b99905aec46a05547d73c62c
Reviewed-on: https://go-review.googlesource.com/c/go/+/290872
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
Trust: Robert Griesemer <gri@golang.org>
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
This template is based on CL 248198 and previous ones like it.
Continue to eagerly include often-used sections, and clarify that
the TODO is about completing the section, or removing if it turns
out not to be needed.
Move the Go 1.16 release notes to x/website, since that's the new
home for past Go release notes as of CL 291711. They're added to
x/website in CL 295249.
'relnote -html' does not report any CLs with RELNOTE annotations
since 2021/02/01.
For #44513.
Updates #40700.
Change-Id: Idd389335500ec4dec2764cbbaa385918cc8a79ad
Reviewed-on: https://go-review.googlesource.com/c/go/+/295209
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
Updates #40700
Change-Id: Ifff622ccadaa31c0c0684c3c695aadcaa2305623
Reviewed-on: https://go-review.googlesource.com/c/go/+/294669
Trust: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The spec states that a type "may" have a method set associated with it.
Yet every type has a method set, which may be empty. This is clarified
later in the same paragraph. Be clear in the first sentence as well.
Per the suggestion from https://github.com/DQNEO.
Fixes#44318.
Change-Id: I6097b1c7062853e404b7fead56d18a7f9c576fc3
Reviewed-on: https://go-review.googlesource.com/c/go/+/292853
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes#40700.
Change-Id: I99ed479d1bb3cdf469c0209720c728276182a7a9
Reviewed-on: https://go-review.googlesource.com/c/go/+/291809
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
Trust: Alexander Rakoczy <alex@golang.org>
Run-TryBot: Alexander Rakoczy <alex@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
They have moved to x/website in CL 291693.
The docs that are left are the ones that are edited at the same time
as development in this repository and are tied to the specific version
of Go being developed. Those are:
- the language spec
- the memory model
- the assembler manual
- the current release's release notes
Change-Id: I437c4d33ada1b1716b1919c3c939c2cacf407e83
Reviewed-on: https://go-review.googlesource.com/c/go/+/291711
Trust: Russ Cox <rsc@golang.org>
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
These live in x/website/content/doc now.
The copies here just attract edits that have no actual effect.
For #40496.
For #41861.
Change-Id: I2fdd7375e373949eb9a88f4cdca440b6a5d45eea
Reviewed-on: https://go-review.googlesource.com/c/go/+/291709
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
For #43985
Change-Id: I1a16f66800c5c648703f0a0d2ad75024525a710f
Reviewed-on: https://go-review.googlesource.com/c/go/+/291389
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
A caller is not always in a function.
For example, a call can appear in top level declarations.
e.g. var x = f()
Change-Id: I29c4c3b7663249434fb2b8a6d0003267c77268cf
Reviewed-on: https://go-review.googlesource.com/c/go/+/290849
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Robert Griesemer <gri@golang.org>
This vet check was added in CL 243397.
For #40700.
Change-Id: Ibff6df9395d37bb2b84a791443578009f23af4fb
GitHub-Last-Rev: e47c38f630
GitHub-Pull-Request: golang/go#44147
Reviewed-on: https://go-review.googlesource.com/c/go/+/290330
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Add missed heading tag in CL 276373.
For #40700
Change-Id: Ida9e8861589bbc296a5a1cecbf9fe33fa09ed0ca
GitHub-Last-Rev: d218f8d4b7
GitHub-Pull-Request: golang/go#44111
Reviewed-on: https://go-review.googlesource.com/c/go/+/289869
Reviewed-by: Tim King <taking@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Trust: Tim King <taking@google.com>
Trust: Dmitri Shuralyov <dmitshur@golang.org>
The example, var v, ok T1 = x.(T), can be interpreted as type T1 interface{} or type T = bool; type T1 = T.
Separating the example would help understanding for readers.
Change-Id: I179f4564e67f4d503815d29307df2cebb50c82f9
GitHub-Last-Rev: b34fffb6bb
GitHub-Pull-Request: golang/go#44040
Reviewed-on: https://go-review.googlesource.com/c/go/+/288472
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Robert Griesemer <gri@golang.org>
For #40700
For #41184Fixes#43957
Change-Id: Ia346f4cf160431b721efeba7dc5f1fb8814efd95
Reviewed-on: https://go-review.googlesource.com/c/go/+/287472
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
A parenthesis of go list "-f" flag format is double curly braces.
Change-Id: Ifd38e0b0ae3c46272a4acd65584818228168b7c6
GitHub-Last-Rev: b46030492b
GitHub-Pull-Request: golang/go#43924
Reviewed-on: https://go-review.googlesource.com/c/go/+/286752
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Currently the only mention of go_asm.h is buried in a confusing
section about the runtime-specific go_tls.h header. We actually want
people to use go_asm.h, so this CL adds a section with a proper
discussion of this header. As part of this, we remove the discussion
of go_asm.h from the go_tls.h section and clean up what remains.
I stumbled on this when working on the internal ABI specification. I
wanted to refer to stable documentation on how to access struct fields
from assembly and found there was none.
Change-Id: I0d53741e7685e65794611939e76285f7c82e1d65
Reviewed-on: https://go-review.googlesource.com/c/go/+/286052
Trust: Austin Clements <austin@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
For #40700
Change-Id: If105d2f043539bb0893f577a984f14ee3e7ca753
Reviewed-on: https://go-review.googlesource.com/c/go/+/285212
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Rerank editor plugins based on popularity (Go 2019 survey), and remove
Atom, as it is no longer popular.
Change-Id: I06d39b67eec24a920439b9ea1198b6e2a939874e
Reviewed-on: https://go-review.googlesource.com/c/go/+/283073
Trust: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Proposal #40281 was initially accepted, but has now been declined.
This CL removes most of the work done to implement it.
Specifically this reverts CLs 248341, 274448, 274474, and 278392.
For #40281
For #43226
Change-Id: I5a9ebb4d9cb5fb0962434b64c59beb8343030be5
Reviewed-on: https://go-review.googlesource.com/c/go/+/281515
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
golang.org/cl/251878 disallowed non-ASCII characters in import paths,
in module mode. They were already disallowed in module paths, so this
change just extended the restriction to the package subdirectory of
the module. Update the release notes to alert users of this change.
Fixes#43052
Change-Id: I1caf9ef978dd3ac599a3f82c5c376ad62e6fc436
Reviewed-on: https://go-review.googlesource.com/c/go/+/282194
Trust: Michael Matloob <matloob@golang.org>
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
In general, we don't want to encourage reading them from CSRs, and
applications that really want to can parse the Extensions field.
Note that this also fixes a bug where the error of
parseKeyUsageExtension was not handled in parseCertificateRequest.
Fixes#43477
Updates #37172
Change-Id: Ia5707b0e23cecc0aed57e419a1ca25e26eea6bbe
Reviewed-on: https://go-review.googlesource.com/c/go/+/281235
Trust: Filippo Valsorda <filippo@golang.org>
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Roland Shoemaker <roland@golang.org>
What a year it has been. If there's one thing we can count on
at a time like this, it's that 2021 is the Year of the Gopher.
Change-Id: I4f6fbbe3d9b4b70df8fadd0d18237f05cd572265
Reviewed-on: https://go-review.googlesource.com/c/go/+/280163
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
A fix for a trivial (yet still confusing for neophytes like me!) typo in
contribute.html.
Change-Id: Ic68673fb2a3855c2b9e8042047087450e8793e6b
Reviewed-on: https://go-review.googlesource.com/c/go/+/279452
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
For #40700.
Change-Id: I67dd55b435304e428929c9a54b8881f9b78efdfb
Reviewed-on: https://go-review.googlesource.com/c/go/+/278392
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The path package doesn't have a Glob function. Adjust the release notes
re. CL 264397 accordingly.
Also add links to the documentation of all mentioned functions.
For #40700.
Change-Id: Ibf3e0530fa6fab36a3f6fbc664f0800869ce9ec7
Reviewed-on: https://go-review.googlesource.com/c/go/+/278213
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
For #40700.
Change-Id: I616429f82a44cea32701ed0af6e42ed6c71ee097
Reviewed-on: https://go-review.googlesource.com/c/go/+/277378
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Go 1.4 does not work on some systems, including the most
recent versions of macOS. Make it clearer that that's not the only
way to bootstrap Go.
Change-Id: I7c03d6808e43bf26283a53eab2bb0b2dc4af73af
Reviewed-on: https://go-review.googlesource.com/c/go/+/277216
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Also add -overlay to the Go 1.16 release notes.
For #40700Fixes#39958Fixes#42893
Change-Id: Ifd397549e368b255e7b8800986cfa0563a942af5
Reviewed-on: https://go-review.googlesource.com/c/go/+/274714
Trust: Michael Matloob <matloob@golang.org>
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
For #40700Fixes#42895
Change-Id: I05b60f0d000512d5dddb3d61e0e695aa01943d6a
Reviewed-on: https://go-review.googlesource.com/c/go/+/274617
Trust: Tim King <taking@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
The tools section TODO can be removed since the tools section looks
complete by now.
All TODOs in the minor changes to the library section have been done,
so the top-level TODO is resolved. Delete it.
The currently highlighted entries under Core library section look
good. It's worth reviewing this further based on feedback from Go
1.16 pre-releases, so keep the TODO but make it non-user-visible
to unblock Go 1.16 Beta 1.
For #40700.
Change-Id: Ie72661bd457b0a93ef92e1bfc0844072f3b618a6
Reviewed-on: https://go-review.googlesource.com/c/go/+/277212
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Based on text from Daniel Fava.
For #40700.
Change-Id: I0bc3a4340b8a777ff96d3cf226a7d51d3f65db2c
Reviewed-on: https://go-review.googlesource.com/c/go/+/275786
Trust: Austin Clements <austin@google.com>
Reviewed-by: Daniel Fava <danielsfava@gmail.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
For #40700
Change-Id: Idea442d45d18ca8cedc0b160df23eac6b86755ef
Reviewed-on: https://go-review.googlesource.com/c/go/+/275677
Trust: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
There are no language changes in Go 1.16, so document that.
For #40700.
Fixes#42976.
Change-Id: I80b0d2ce6cf550c00c0f026ee59ac9fbce6310be
Reviewed-on: https://go-review.googlesource.com/c/go/+/275117
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Sub provides a convenient way to refer to a subdirectory
automatically in future operations, like Unix's chdir(2).
The CL also includes updates to fstest to check Sub implementations.
As part of updating fstest, I changed the meaning of TestFS's
expected list to introduce a special case: if you list no expected files,
that means the FS must be empty. In general it's OK not to list all
the expected files, but if you list none, that's almost certainly a
mistake - if your FS were broken and empty, you wouldn't find out.
Making no expected files mean "must be empty" makes the mistake
less likely - if your file system ever worked, then your test will keep
it working.
That change found a testing bug: embedtest was making exactly
that mistake.
Fixes#42322.
Change-Id: I63fd4aa866b30061a0e51ca9a1927e576d6ec41e
Reviewed-on: https://go-review.googlesource.com/c/go/+/274856
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Go 1.16 will be the last to support macOS 10.12 Sierra.
Go 1.17 will require macOS 10.13 High Sierra.
For #23011.
Change-Id: I80052bdde4d9f1c5d71b67b85f65fb0b40856750
Reviewed-on: https://go-review.googlesource.com/c/go/+/275299
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For #40700
Change-Id: I0083db494284d6142e1b8b981fca4ac30af2012a
Reviewed-on: https://go-review.googlesource.com/c/go/+/275312
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Filippo Valsorda <filippo@golang.org>
This resolves all TODOs for the runtime and compiler and mentions
several other changes.
For #40700.
Fixes#42892.
Fixes#42894.
Change-Id: I18d14cfe572baf679ecf8b0a4e82c4b866da5a04
Reviewed-on: https://go-review.googlesource.com/c/go/+/275176
Trust: Austin Clements <austin@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This if follow up of CL 274332.
Updates #9399.
Change-Id: Ic6dd534dc18227a799cbb9577979f2285596b825
Reviewed-on: https://go-review.googlesource.com/c/go/+/274393
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This reverts commit 6af088bfc6.
Reason for revert: Broke many tests inside Google which implies many
tests were broken outside of Google as well. The tests may be brittle
but still would require work to change and it's not clear it's worth
the benefit.
Updates #36221Fixes#42675
Change-Id: Id3a14eb37e7119f5abe50e80dfbf120fdc44db72
Reviewed-on: https://go-review.googlesource.com/c/go/+/273747
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
Trust: Joe Tsai <thebrokentoaster@gmail.com>
For #40700Fixes#42912
Change-Id: Ifd36950136db1fc93a8de76a2717a473210418b1
Reviewed-on: https://go-review.googlesource.com/c/go/+/274473
Trust: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Added notes for:
* go test -c and -i flags used with unknown flags
* GO111MODULE=on by default
* GOVCS
* Dropped requirements on excluded versions
Removed TODOs for documentation on the retract directive and
'go install pkg@version'. These pages will be written after the beta.
Change-Id: Ic9877a62f908be177a6035a039b72e969e7b7f22
Reviewed-on: https://go-review.googlesource.com/c/go/+/274438
Trust: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Many of the standard library changes that were added before CL 272871
ended up in the "Core library" section. That section is meant for
major changes like new packages, and most of these aren't.
Consolidate all changes in the "Minor changes to the library" section
for now, so that it's easier to get a complete picture of changes for
each package, along with the remaining TODOs. Add a TODO to read them
over at the end and factor out items that are worth highlighting.
Apply minor other fixups to improve consistency.
For #40700.
Change-Id: I7dc2e7ebf2ea3385fce0c207bae4ce467998a717
Reviewed-on: https://go-review.googlesource.com/c/go/+/273267
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Katie Hockman <katie@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
For #40700
Change-Id: I056cef20a5f071977d0ae589c7a50d5f69af3283
Reviewed-on: https://go-review.googlesource.com/c/go/+/273166
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
The additions were generated using golang.org/x/build/cmd/relnote
at CL 272907. It was modified to find previously-missed entries
by querying the Gerrit API in addition to the maintner corpus.
For #40700.
Updates #41849.
Change-Id: If575984fe40e0133ad5e8fc5411ea5063457250d
Reviewed-on: https://go-review.googlesource.com/c/go/+/272871
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
Because we're expecting for future functions to be unavailable, we
should add an Unwrap() function to the DLLError struct, so that people
can test for this situation easily via:
if errors.Is(err, syscall.ERROR_PROC_NOT_FOUND) { ... }
DLLError already was wrapping the underlying Errno error, but never got
the Go 1.13 helper method.
Fixesgolang/go#42584
Change-Id: I0f32a5146946b1b37a30897ba825a56faefc792c
Reviewed-on: https://go-review.googlesource.com/c/go/+/269761
Run-TryBot: Jason A. Donenfeld <Jason@zx2c4.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Trust: Alex Brainman <alex.brainman@gmail.com>
Trust: Jason A. Donenfeld <Jason@zx2c4.com>
When either the server or client are lacking hardware support for
AES-GCM ciphers, indicated by the server lacking the relevant
instructions and by the client not putting AES-GCM ciphers at the top
of its preference list, reorder the preference list to de-prioritize
AES-GCM based ciphers when they are adjacent to other AEAD ciphers.
Also updates a number of recorded openssl TLS tests which previously
only specified TLS 1.2 cipher preferences (using -cipher), but not
TLS 1.3 cipher preferences (using -ciphersuites), to specify both
preferences, making these tests more predictable.
Fixes#41181.
Change-Id: Ied896c96c095481e755aaff9ff0746fb4cb9568e
Reviewed-on: https://go-review.googlesource.com/c/go/+/262857
Run-TryBot: Roland Shoemaker <roland@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Trust: Roland Shoemaker <roland@golang.org>
Trust: Katie Hockman <katie@golang.org>
This is a SHALL in RFC 7301, Section 3.2.
Also some more cleanup after NPN, which worked the other way around
(with the possibility that the client could pick a protocol the server
did not suggest).
Change-Id: I83cc43ca1b3c686dfece8315436441c077065d82
Reviewed-on: https://go-review.googlesource.com/c/go/+/239748
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Filippo Valsorda <filippo@golang.org>
Trust: Roland Shoemaker <roland@golang.org>
Reviewed-by: Roland Shoemaker <roland@golang.org>
Adds the (*tls.Conn).HandshakeContext method. This allows
us to pass the context provided down the call stack to
eventually reach the tls.ClientHelloInfo and
tls.CertificateRequestInfo structs.
These contexts are exposed to the user as read-only via Context()
methods.
This allows users of (*tls.Config).GetCertificate and
(*tls.Config).GetClientCertificate to use the context for
request scoped parameters and cancellation.
Replace uses of (*tls.Conn).Handshake with (*tls.Conn).HandshakeContext
where appropriate, to propagate existing contexts.
Fixes#32406
Change-Id: I33c228904fe82dcf57683b63627497d3eb841ff2
Reviewed-on: https://go-review.googlesource.com/c/go/+/246338
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Roland Shoemaker <roland@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
build, install, and test will now print deprecation messages when the
-i flag is used. clean will continue to support -i.
For #41696
Change-Id: I956c235c487a872c5e6c1395388b4d6cd5ef817a
Reviewed-on: https://go-review.googlesource.com/c/go/+/266368
Trust: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
For #40276
Change-Id: I5e631a4c9ce07f23640fb56eb455457bc55072c6
Reviewed-on: https://go-review.googlesource.com/c/go/+/266360
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This change also documents the need to set a Deadline before
calling Read or Write.
Fixes#31224
Change-Id: I89d6fe3ecb0a0076b4c61765f61c88056f951406
Reviewed-on: https://go-review.googlesource.com/c/go/+/266037
Trust: Katie Hockman <katie@golang.org>
Run-TryBot: Katie Hockman <katie@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Previously, we resolved each argument to 'go get' to a package path or
module path based on what was in the build list at existing versions,
even if the argument specified a different version explicitly. That
resulted in bugs like #37438, in which we variously resolved the wrong
version or guessed the wrong argument type for what is unambiguously a
package argument at the requested version.
We were also using a two-step upgrade/downgrade algorithm, which could
not only upgrade more that is strictly necessary, but could also
unintentionally upgrade *above* the requested versions during the
downgrade step.
This change instead uses an iterative approach, with an explicit
disambiguation step for the (rare) cases where an argument could match
the same package path in multiple modules. We use a hook in the
package loader to halt package loading as soon as an incorrect version
is found — preventing over-resolving — and verify that the result
after applying downgrades successfully obtained the requested versions
of all modules.
Making 'go get' be correct and usable is especially important now that
we are defaulting to read-only mode (#40728), for which we are
recommending 'go get' more heavily.
While I'm in here refactoring, I'm also reworking the API boundary
between the modget and modload packages. Previously, the modget
package edited the build list directly, and the modload package
accepted the edited build list without validation. For lazy loading
(#36460), the modload package will need to maintain additional
metadata about the requirement graph, so it needs tighter control over
the changes to the build list.
As of this change, modget no longer invokes MVS directly, but instead
goes through the modload package. The resulting API gives clearer
reasons in case of updates, which we can use to emit more useful
errors.
Fixes#37438
Updates #36460
Updates #40728
Change-Id: I596f0020f3795870dec258147e6fc26a3292c93a
Reviewed-on: https://go-review.googlesource.com/c/go/+/263267
Trust: Bryan C. Mills <bcmills@google.com>
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
In the current (pre-CL) version of the spec, the 2nd last shift
example appears to be using the array declared in the last example.
On a 32-bit platform, that array would have length 0, which would
lead to a panic in the 2nd last example. Also, if this code were
inside a function, it wouldn't compile (array declared after use).
Use an explicitly declared array for that specific shift example.
Also, split out all cases that produce different results for 32-
vs 64-bit ints.
Fixes#41835.
Change-Id: Ie45114224509e4999197226f91f7f6f934449abb
Reviewed-on: https://go-review.googlesource.com/c/go/+/260398
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This reverts commit 8f26b57f9a.
Reason for revert: break a bunch of code, include standard library.
Fixes#42123
Change-Id: Ife90ecbafd2cb395623d1db555fbfc9c1b0098e0
Reviewed-on: https://go-review.googlesource.com/c/go/+/264026
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This corresponds to the feature in https://golang.org/cl/263542, since
this can be a noteworthy change to people writing tools to inspect Go
builds.
Also amend the wording to clarify that build IDs are for an entire
compiled package, not just their export data or object file.
Change-Id: I2eb295492807d5d2997a35e5e2371914cb3ad3a0
Reviewed-on: https://go-review.googlesource.com/c/go/+/264158
Trust: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Change-Id: I89c61e444b3ab36f0081a5252d210cb265344122
Reviewed-on: https://go-review.googlesource.com/c/go/+/264157
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Trust: Alex Brainman <alex.brainman@gmail.com>
This way, a -toolexec tool can tell precisely what package is being
built when it's run. This was very hard to do before, because the tool
had to piece together that information given the build action's
arguments or flags.
Since there wasn't a good set of tests for -toolexec, add one in the
form of a test script. It builds a simple set of packages with a variety
of build tools, to ensure that all the cases behave as expected.
Like other recent master changes, include the changelog item for this
user-facing change too.
Fixes#15677.
Change-Id: I0a5a1d9485840323ec138b2e64b7e7dd803fdf90
Reviewed-on: https://go-review.googlesource.com/c/go/+/263357
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Trust: Daniel Martí <mvdan@mvdan.cc>
Fixes the check for the reserved namespace prefix
"xml" to be case insensitive, so as to match all variants of:
(('X'|'x')('M'|'m')('L'|'l'))
as mandated by Section 2.3 of https://www.w3.org/TR/REC-xml/
This is a roll forward of CL 203417, which was rolled back by CL 240179.
We've decided that the roll back was incorrect, and any broken tests
should be fixed.
The original CL 203417 was by Tamás Gulácsi.
Fixes#35151
For #39876
Change-Id: I2e6daa7aeb252531fba0b8a56086613e13059528
Reviewed-on: https://go-review.googlesource.com/c/go/+/264024
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Damien Neil <dneil@google.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
The other named errors - UnmarshalTypeError, etc - in this package do
the same, so we should prepend the package prefix to error messages
for consistency.
Add a note to the release docs in case this is interpreted as
a breaking change.
Fixes#36221.
Change-Id: Ie24b532bbf9812e108c259fa377e2a6b64319ed4
Reviewed-on: https://go-review.googlesource.com/c/go/+/263619
Run-TryBot: Kevin Burke <kev@inburke.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Kevin Burke <kev@inburke.com>
Trust: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Also put Reset in the correct place for the other
benchmarks.
name old time/op new time/op delta
NewWriteSum-8 1.01µs ± 0% 1.01µs ± 1% ~ (p=0.945 n=9+9)
name old speed new speed delta
NewWriteSum-8 31.7MB/s ± 0% 31.6MB/s ± 1% ~ (p=0.948 n=9+9)
name old alloc/op new alloc/op delta
NewWriteSum-8 544B ± 0% 544B ± 0% ~ (all equal)
name old allocs/op new allocs/op delta
NewWriteSum-8 7.00 ± 0% 7.00 ± 0% ~ (all equal)
Fixes#41089
Change-Id: I3dae660adbe4993963130bf3c2636bd53899164b
Reviewed-on: https://go-review.googlesource.com/c/go/+/261960
Trust: Katie Hockman <katie@golang.org>
Trust: Roland Shoemaker <roland@golang.org>
Run-TryBot: Katie Hockman <katie@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Reviewed-by: Roland Shoemaker <roland@golang.org>
Also fix BenchmarkAtof64Random* to initialize the test data when none
of the TestAtof* tests are run.
Passing "go test -test.count=5 -test.run=xxx -test.bench=Atof64" on to
benchstat:
name old time/op new time/op delta
Atof64Decimal-4 47.9ns ± 0% 48.3ns ± 1% ~ (p=0.238 n=4+5)
Atof64Float-4 58.3ns ± 3% 57.7ns ± 0% ~ (p=0.151 n=5+5)
Atof64FloatExp-4 107ns ± 0% 71ns ± 1% -33.89% (p=0.016 n=4+5)
Atof64Big-4 163ns ± 0% 166ns ± 2% ~ (p=0.159 n=4+5)
Atof64RandomBits-4 299ns ± 1% 166ns ± 1% -44.41% (p=0.008 n=5+5)
Atof64RandomFloats-4 188ns ± 1% 144ns ± 0% -23.03% (p=0.008 n=5+5)
The canada.json file from github.com/miloyip/nativejson-benchmark is
full of geospatial coordinates (i.e. numbers). With this program:
src, _ := ioutil.ReadFile("canada.json")
for i := 0; i < 5; i++ {
now := time.Now()
for j := 0; j < 10; j++ {
dst := interface{}(nil)
if err := json.Unmarshal(src, &dst); err != nil {
log.Fatal(err)
}
}
fmt.Println(time.Since(now))
}
Median of the 5 printed numbers, lower is better.
Before: 760.819549ms
After: 702.651646ms
Ratio: 1.08x
The new detailedPowersOfTen table weighs in at 596 * 16 = 9536 bytes,
but some of that weight gain can be clawed back, in a follow-up commit,
that folds in the existing powersOfTen table in extfloat.go.
RELNOTE=yes
Change-Id: I3953110deaa1f5f6941e88e8417c4665b649ed80
Reviewed-on: https://go-review.googlesource.com/c/go/+/260858
Run-TryBot: Nigel Tao <nigeltao@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Nigel Tao <nigeltao@golang.org>
This changes checks the signature generated during CreateCertificate
and returns an error if the verification fails. A benchmark is also
added. For RSA keys the delta looks to be insignificant, but for
ECDSA keys it introduces a much larger delta which is not ideal.
name old time/op new time/op delta
RSA_2048-8 1.38ms ± 6% 1.41ms ± 2% ~ (p=0.182 n=10)
ECDSA_P256-8 42.6µs ± 4% 116.8µs ± 4% +174.00% (p=0.000 n=1
Fixes#40458
Change-Id: I22827795bb9bb6868b4fa47391927db1d3bc19a1
Reviewed-on: https://go-review.googlesource.com/c/go/+/259697
Run-TryBot: Roland Shoemaker <roland@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Trust: Emmanuel Odeke <emm.odeke@gmail.com>
Trust: Roland Shoemaker <roland@golang.org>
Setting inittrace=1 causes the runtime to emit a single line to standard error for
each package with init work, summarizing the execution time and memory allocation.
The emitted debug information for init functions can be used to find bottlenecks
or regressions in Go startup performance.
Packages with no init function work (user defined or compiler generated) are omitted.
Tracing plugin inits is not supported as they can execute concurrently. This would
make the implementation of tracing more complex while adding support for a very rare
use case. Plugin inits can be traced separately by testing a main package importing
the plugins package imports explicitly.
$ GODEBUG=inittrace=1 go test
init internal/bytealg @0.008 ms, 0 ms clock, 0 bytes, 0 allocs
init runtime @0.059 ms, 0.026 ms clock, 0 bytes, 0 allocs
init math @0.19 ms, 0.001 ms clock, 0 bytes, 0 allocs
init errors @0.22 ms, 0.004 ms clock, 0 bytes, 0 allocs
init strconv @0.24 ms, 0.002 ms clock, 32 bytes, 2 allocs
init sync @0.28 ms, 0.003 ms clock, 16 bytes, 1 allocs
init unicode @0.44 ms, 0.11 ms clock, 23328 bytes, 24 allocs
...
Inspired by stapelberg@google.com who instrumented doInit
in a prototype to measure init times with GDB.
Fixes#41378
Change-Id: Ic37c6a0cfc95488de9e737f5e346b8dbb39174e1
Reviewed-on: https://go-review.googlesource.com/c/go/+/254659
Trust: Martin Möhrmann <moehrmann@google.com>
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Currently, mhdr/methods is emitted with the same len/cap. There's no way
to distinguish between exported and non-exported methods statically.
This CL splits mhdr/methods into two parts, use "len" for number of
exported methods, and "cap" for all methods. This fixes the bug in
issue #22075, which intends to return the number of exported methods but
currently return all methods.
Note that with this encoding, we still can access either
all/exported-only/non-exported-only methods:
mhdr[:cap(mhdr)] // all methods
mhdr // exported methods
mhdr[len(mhdr):cap(mhdr)] // non-exported methods
Thank to Matthew Dempsky (@mdempsky) for suggesting this encoding.
Fixes#22075
Change-Id: If662adb03ccff27407d55a5578a0ed05a15e7cdd
Reviewed-on: https://go-review.googlesource.com/c/go/+/259237
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The current specification does not foresee a SameSite attribute without
a value. While the existing implementation would serialize SameSite in a
way that would likely be ignored by well-impelemented clients, it is
better to not rely on this kind of quirks.
Specification: https://tools.ietf.org/html/draft-ietf-httpbis-rfc6265bis-05#section-4.1.1Fixes#36990
Change-Id: Ie51152741d7e84bab64d3e4e4f780286932acbde
Reviewed-on: https://go-review.googlesource.com/c/go/+/256498
Trust: Roberto Clapis <roberto@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Also add a few more TODOs as found by the relnote command.
It's an incomplete list due to #41849.
For #40700.
Change-Id: Id17a9be86d3338e1fcb281d26e7298ff26e92864
Reviewed-on: https://go-review.googlesource.com/c/go/+/260337
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Dmitri Shuralyov <dmitshur@golang.org>
netbsd/arm64 now complies with all the requirements for a port as
specified on https://golang.org/wiki/PortingPolicy
Note that this was preliminarily announced in the Go 1.13 release notes
(CL 183637) but then removed again due to the port lacking a builder at
that time (CL 192997).
Updates #30824
Change-Id: I2f40fabc84fe9cb699282e6a9d13ed9b64478e36
Reviewed-on: https://go-review.googlesource.com/c/go/+/259277
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Extends the IA5String encoding restrictions that are currently applied
to name constraints to dNSName, rfc822Name, and
uniformResourceIdentifier elements of the SAN. The utility function
isIA5String is updated to use unicode.MaxASCII rather than utf8.RuneSelf
as it is somewhat more readable.
Certificates that include these badly encoded names do exist, but are
exceedingly rare. zlint and other linters enforce this encoding and
searching censys.io reveals only three currently trusted certificates
with this particular encoding issue.
Fixes#26362
Change-Id: I7a4f3e165a1754e5b4bfaeabc03e01eb7367f3c9
Reviewed-on: https://go-review.googlesource.com/c/go/+/235078
Run-TryBot: Roland Shoemaker <roland@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Roland Shoemaker <roland@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Suggested by @yaxinlx.
Fixes#41612.
Change-Id: I98b9968a95d090ee3c67ff02678e1874e6d98c33
Reviewed-on: https://go-review.googlesource.com/c/go/+/257159
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Introduce GOOS=ios for iOS systems. GOOS=ios matches "darwin"
build tag, like GOOS=android matches "linux" and GOOS=illumos
matches "solaris". Only ios/arm64 is supported (ios/amd64 is
not).
GOOS=ios and GOOS=darwin remain essentially the same at this
point. They will diverge at later time, to differentiate macOS
and iOS.
Uses of GOOS=="darwin" are changed to (GOOS=="darwin" || GOOS=="ios"),
except if it clearly means macOS (e.g. GOOS=="darwin" && GOARCH=="amd64"),
it remains GOOS=="darwin".
Updates #38485.
Change-Id: I4faacdc1008f42434599efb3c3ad90763a83b67c
Reviewed-on: https://go-review.googlesource.com/c/go/+/254740
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
The instructions have already been updated in greater
detail in "Step 2: Configure git authentication", but
the overview needs updated to reflect the new workflow.
Change-Id: I6f411a3dc500a9058036a4a828403c0153e4220a
Reviewed-on: https://go-review.googlesource.com/c/go/+/256857
Trust: Katie Hockman <katie@golang.org>
Run-TryBot: Katie Hockman <katie@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
This flag, like the -e flag to 'go list', instructs the command to
make a best effort to continue in spite of errors for specific packages.
Fixes#26603
Change-Id: I5ee2f50c71870ae8ef3f9b3e5b045474adcca525
Reviewed-on: https://go-review.googlesource.com/c/go/+/255960
Trust: Bryan C. Mills <bcmills@google.com>
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
The cgo tool would sometimes emit a bitfield at an offset that did not
correspond to the C offset, such as for the example in the new test.
Change-Id: I61b2ca10ee44a42f81c13ed12865f2060168fed5
Reviewed-on: https://go-review.googlesource.com/c/go/+/252378
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
With this change, 'go install' will install executables in module mode
without using or modifying the module in the current directory, if
there is one.
For #40276
Change-Id: I922e71719b3a4e0c779ce7a30429355fc29930bf
Reviewed-on: https://go-review.googlesource.com/c/go/+/254365
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
The new semantics of the "all" package pattern can be implemented
without actually changing module loading per se. This change
implements those semantics, so that the change can be decoupled from
the changes to the module requirement graph.
For #36460
Change-Id: I0ee8b17afa8b728dc470a42a540fcc01764a4442
Reviewed-on: https://go-review.googlesource.com/c/go/+/240623
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
Change the section to use <dl>, <dt>, and <dd> tags to match
previous documents.
Change-Id: Ide0bea698a84ed6b61b364ef9e2f3801ebb8d4d6
Reviewed-on: https://go-review.googlesource.com/c/go/+/250897
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes the file server to reject requests of the form:
"Range": "bytes=--N"
where "-N" is a negative suffix-length as designated by the
grammar in RFC 7233 Section 2.1, "Byte-Ranges", which specifies
that suffix-length MUST be of the form 1*DIGIT aka a non-negative digit.
Thus requests such as:
"Range": "bytes=--2"
will be rejected with a "416 Range Not Satisfiable" response.
Fixes#40940
Change-Id: I3e89f8326c14af30d8bdb126998a50e02ba002d9
Reviewed-on: https://go-review.googlesource.com/c/go/+/252497
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This catches cases where a test calls code that calls os.Exit(0),
thereby skipping all subsequent tests.
Fixes#29062
Change-Id: If9478972f40189e27623557e7141469ca4234d89
Reviewed-on: https://go-review.googlesource.com/c/go/+/250977
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This permits programs to reliably detect whether they are using a
closed network connection.
Fixes#4373
Change-Id: Ib4ce8cc82bbb134c4689f0ebc8b9b11bb8b32a22
Reviewed-on: https://go-review.googlesource.com/c/go/+/250357
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Russ Cox <rsc@golang.org>
For #24031
Change-Id: I9bd0905e9aacee4bec3463b7d91f6f0929744752
Reviewed-on: https://go-review.googlesource.com/c/go/+/228384
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The StripPrefix wrapper strips a prefix string from the request's
URL.Path field, but doesn't touch the RawPath field. This leads to the
confusing situation when StripPrefix handles a request with URL.RawPath
populated (due to some escaped characters in the request path) and the
wrapped request's RawPath contains the prefix but Path does not.
This change modifies StripPrefix to strip the prefix from both Path and
RawPath. If there are escaped characters in the prefix part of the
request URL the stripped handler serves a 404 instead of invoking the
underlying handler with a mismatched Path/RawPath pair.
This is a backward incompatible change for a very small minority of
requests; I would be surprised if anyone is depending on this behavior,
but it is possible. If that's the case, we could make a more
conservative change where the RawPath is trimmed if possible, but when
the prefix contains escaped characters then we don't 404 but rather send
through the invalid Path/RawPath pair as before.
Fixes#24366
Change-Id: I7030b8c183a3dfce307bc0272bba9a18df4cfe08
Reviewed-on: https://go-review.googlesource.com/c/go/+/233637
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The log package is used with the net/http but was not in the import clause.
Change-Id: Ic45b987633adf0ee15defd4d136b5d37027e22b0
GitHub-Last-Rev: e74aff5337
GitHub-Pull-Request: golang/go#36674
Reviewed-on: https://go-review.googlesource.com/c/go/+/215618
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Add a draft version of a blurb on improvements to the linker. This
will need to be finalized later in the release since there are still
some additional changes to be made to the linker in 1.16.
Updates #40703.
Change-Id: Id85c7e129071cc2faacb09c53a2968bd52b0a7b4
Reviewed-on: https://go-review.googlesource.com/c/go/+/248238
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Austin Clements <austin@google.com>
