The go/printer (and thus gofmt) uses a heuristic to determine
whether to break alignment between elements of an expression
list which is spread across multiple lines. The heuristic only
kicked in if the entry sizes (character length) was above a
certain threshold (20) and the ratio between the previous and
current entry size was above a certain value (4).
This heuristic worked reasonably most of the time, but also
led to unfortunate breaks in many cases where a single entry
was suddenly much smaller (or larger) then the previous one.
The behavior of gofmt was sufficiently mysterious in some of
these situations that many issues were filed against it.
The simplest solution to address this problem is to remove
the heuristic altogether and have a programmer introduce
empty lines to force different alignments if it improves
readability. The problem with that approach is that the
places where it really matters, very long tables with many
(hundreds, or more) entries, may be machine-generated and
not "post-processed" by a human (e.g., unicode/utf8/tables.go).
If a single one of those entries is overlong, the result
would be that the alignment would force all comments or
values in key:value pairs to be adjusted to that overlong
value, making the table hard to read (e.g., that entry may
not even be visible on screen and all other entries seem
spaced out too wide).
Instead, we opted for a slightly improved heuristic that
behaves much better for "normal", human-written code.
1) The threshold is increased from 20 to 40. This disables
the heuristic for many common cases yet even if the alignment
is not "ideal", 40 is not that many characters per line with
todays screens, making it very likely that the entire line
remains "visible" in an editor.
2) Changed the heuristic to not simply look at the size ratio
between current and previous line, but instead considering the
geometric mean of the sizes of the previous (aligned) lines.
This emphasizes the "overall picture" of the previous lines,
rather than a single one (which might be an outlier).
3) Changed the ratio from 4 to 2.5. Now that we ignore sizes
below 40, a ratio of 4 would mean that a new entry would have
to be 4 times bigger (160) or smaller (10) before alignment
would be broken. A ratio of 2.5 seems more sensible.
Applied updated gofmt to all of src and misc. Also tested
against several former issues that complained about this
and verified that the output for the given examples is
satisfactory (added respective test cases).
Some of the files changed because they were not gofmt-ed
in the first place.
For #644.
For #7335.
For #10392.
(and probably more related issues)
Fixes#22852.
Change-Id: I5e48b3d3b157a5cf2d649833b7297b33f43a6f6e
The trace viewer interprets the slice as a non-terminating
time interval which is quite opposit to what trace records indicate
(i.e., almostly immediately terminating time interval).
As observed in the issue #24663 this can result in quite misleading
visualization of the trace.
Work around the trace viewer's issue by setting a small value
(0.0001usec) as the duration if the time interval is not positive.
Change-Id: I1c2aac135c194d0717f5c01a98ca60ffb14ef45c
Reviewed-on: https://go-review.googlesource.com/104716
Reviewed-by: Heschi Kreinick <heschi@google.com>
This mode is similar to the default traceview mode where the execution
trace is presented in P-oriented way. Each row represents a P, and each
slice represents the time interval of a goroutine's execution on the P.
The difference is that, in this mode, only the execution of goroutines
involved in the specified task is highlighted, and other goroutine
execution or events are greyed out. So, users can focus on how a task is
executed while considering other affecting conditions such as other
goroutines, network events, or process scheduling.
Example: https://user-images.githubusercontent.com/4999471/38116793-a6f995f0-337f-11e8-8de9-88eec2f2c497.png
Here, for a while the program remained idle after the first burst of
activity related to the task because all other goroutines were also
being blocked or waiting for events, or no incoming network traffic
(indicated by the lack of any network activity). This is a bit hard to
discover when the usual task-oriented view (/trace?taskid=<taskid>)
mode.
Also, it simplifies the traceview generation mode logic.
/trace ---> 0
/trace?goid ---> modeGoroutineOriented
/trace?taskid ---> modeGoroutineOriented|modeTaskOriented
/trace?focustask ---> modeTaskOriented
Change-Id: Idcc0ae31b708ddfd19766f4e26ee7efdafecd3a5
Reviewed-on: https://go-review.googlesource.com/103555
Run-TryBot: Hyang-Ah Hana Kim <hyangah@gmail.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Currently, the runtime falls back to asking for any address the OS can
offer for the heap when it runs out of hint addresses. However, the
race detector assumes the heap lives in [0x00c000000000,
0x00e000000000), and will fail in a non-obvious way if we go outside
this region.
Fix this by actively throwing a useful error if we run out of heap
hints in race mode.
This problem is currently being triggered by TestArenaCollision, which
intentionally triggers this fallback behavior. Fix the test to look
for the new panic message in race mode.
Fixes#24670.
Updates #24133.
Change-Id: I57de6d17a3495dc1f1f84afc382cd18a6efc2bf7
Reviewed-on: https://go-review.googlesource.com/104717
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
On darwin, only writable symbol is exported
(cmd/link/internal/ld/macho.go:/machoShouldExport).
For plugin to work correctly, global variables, including
runtime.framepointer_enabled which is set by the linker, need
to be exported when dynamic linking. Put it in DATA so it is
exported. Also in Go it is defined as a var, which is not
read-only.
While here, do the same for runtime.goarm.
Fixes#24653.
Change-Id: I9d1b7d5a648be17103d20b97be65a901cb69f5a2
Reviewed-on: https://go-review.googlesource.com/104715
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Variables can be declared and shadowing is supported, but modifying
existing variables via assignments was not available.
This meant that modifying a variable from a nested block was not
possible:
{{ $v := "init" }}
{{ if true }}
{{ $v := "changed" }}
{{ end }}
v: {{ $v }} {{/* "init" */}}
Introduce the "=" assignment token, such that one can now do:
{{ $v := "init" }}
{{ if true }}
{{ $v = "changed" }}
{{ end }}
v: {{ $v }} {{/* "changed" */}}
To avoid confusion, rename PipeNode.Decl to PipeNode.Vars, as the
variables may not always be declared after this change. Also change a
few other names to better reflect the added ambiguity of variables in
pipelines.
Modifying the text/template/parse package in a backwards incompatible
manner is acceptable, given that the package godoc clearly states that
it isn't intended for general use. It's the equivalent of an internal
package, back when internal packages didn't exist yet.
To make the changes to the parse package sit well with the cmd/api test,
update except.txt with the changes that we aren't worried about.
Fixes#10608.
Change-Id: I1f83a4297ee093fd45f9993cebb78fc9a9e81295
Reviewed-on: https://go-review.googlesource.com/84480
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
If A's external test package imports B, which imports A, and A's
internal test code adds something to A that invalidates anything in A's
export data, then we need to build B against the test-augmented version
of A before using it to build A's external test package.
https://golang.org/cl/92215 taught 'go test' to do this rebuilding
properly, but 'go vet' was not taught the same trick when it learned to
vet test packages in https://golang.org/cl/87636. This commit moves the
necessary logic into the load.TestPackagesFor function so it can be
shared by 'go test' and 'go vet'.
Fixes#23701.
Change-Id: I1086d447eca02933af53de693384eac99a08d9bd
Reviewed-on: https://go-review.googlesource.com/104315
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
And delete them from asm_test.
Change-Id: Id533130470da9176a401cb94972f626f43a62148
Reviewed-on: https://go-review.googlesource.com/103656
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Add the following helpers in lookup_windows.go:
1) lookupGroupName() is used to obtain the SID of a group based
on name.
2) listGroupsForUsernameAndDomain() uses NetUserGetLocalGroups()
as a WINAPI backend to obtain the list of local groups for this
user.
3) lookupUserPrimaryGroup() is now used to populate the User.Gid
field when looking up a user by name.
Implement listGroups(), lookupGroupId(), lookupGroup() and no longer
return unimplemented errors.
Do not skip Windows User.Gid tests in user_test.go.
Change-Id: I81fd41b406da51f9a4cb24e50d392a333df81141
GitHub-Last-Rev: d1448fd55d
GitHub-Pull-Request: golang/go#24222
Reviewed-on: https://go-review.googlesource.com/98137
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Make the StackCopyNoCache test easier to read.
Add a StackCopyPtr test that actually has some pointers
that need adjusting.
Change-Id: I5b07c26f40cb485c9de97ed63fac89a9e6f36650
Reviewed-on: https://go-review.googlesource.com/104195
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The logic in addBranchRestrictions didn't allow to correctly
model OpIs(Slice)Bound for signed domain, and it was also partly
implemented within addRestrictions.
Thanks to the previous changes, it is now possible to handle
the negative conditions correctly, so that we can learn
both signed/LT + unsigned/LT on the positive side, and
signed/GE + unsigned/GE on the negative side (but only if
the index can be proved to be non-negative).
This is able to prove ~50 more slice accesses in std+cmd.
Change-Id: I9858080dc03b16f85993a55983dbc4b00f8491b0
Reviewed-on: https://go-review.googlesource.com/104037
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
addRestrictions was taking a branch parameter, binding its logic
to that of addBranchRestrictions. Since we will need to use it
for updating the facts table for induction variables, refactor it
to remove the branch parameter.
Passes toolstash -cmp.
Change-Id: Iaaec350a8becd1919d03d8574ffd1bbbd906d068
Reviewed-on: https://go-review.googlesource.com/104036
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
That "else" was needed due to gc DCE limitations.
Now it's not the case and we can avoid go lint complaints.
(See #23521 and https://golang.org/cl/91056.)
There is inlining test for bigEndianWord, so if test
is passing, no performance regression should occur.
Change-Id: Id84d63f361e5e51a52293904ff042966c83c16e9
Reviewed-on: https://go-review.googlesource.com/104555
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Floating point test instructions allow special cases (NaN, ±∞ and
a few other useful properties) to be checked directly.
This CL adds the following instructions to the assembler:
* LTEBR - load and test (float32)
* LTDBR - load and test (float64)
* TCEB - test data class (float32)
* TCDB - test data class (float64)
Note that I have only added immediate versions of the 'test data
class' instructions for now as that's the only case I think the
compiler will use.
Change-Id: I3398aab2b3a758bf909bd158042234030c8af582
Reviewed-on: https://go-review.googlesource.com/104457
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Performance optimization for the internals of the Regexp type. This adds
no features and has no user-visible impact beyond performance. Copy now
shares the cache, so memory usage for programs that use Copy a lot
should go down; Copy has effectively become a no-op.
The before v. after benchmark results show a lot of noise from run to
run, but there's a clear improvement to the Shared case and no detriment
to the Copied case.
BenchmarkMatchParallelShared-4 361 77.9 -78.42%
BenchmarkMatchParallelCopied-4 70.3 72.2 +2.70%
Macro benchmarks show that the lock contention in Regexp is gone, and my
server is now able to scale linearly 2.5x times more than before (and I
only stopped there because I ran out of CPU in my test machine).
Fixes#24411
Change-Id: Ib33abff2802f27599f5d09084775e95b54e3e1d7
Reviewed-on: https://go-review.googlesource.com/101715
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Provide the fixed size from the key pair.
Change-Id: I365c8d0f7d915229ef089e46458d4c83273fc648
Reviewed-on: https://go-review.googlesource.com/103876
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When making a shallow copy of a node, various methods were used,
including calling nod(OXXX, nil, nil) and then overwriting it, or
"n1 := *n" and then using &n1.
Add a copy method instead, simplifying all of those and making them
consistent.
Passes toolstash -cmp on std cmd.
Change-Id: I3f3fc88bad708edc712bf6d87214cda4ddc43b01
Reviewed-on: https://go-review.googlesource.com/72710
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
prove used a complex logic when trying to prove branch conditions:
tryPushBranch() was sometimes leaving a checkpoint on the factsTable,
sometimes not, and the caller was supposed to check the return value
to know what to do.
Since we're going to make the prove descend logic a little bit more
complex by adding also induction variables, simplify the tryPushBranch
logic, by removing any factsTable checkpoint handling from it.
Passes toolstash -cmp.
Change-Id: Idfb1703df8a455f612f93158328b36c461560781
Reviewed-on: https://go-review.googlesource.com/104035
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Previously, n.Pos was reassigned to lineno when declare was called,
which might not match where the identifier actually appeared in the
source. This caused a loss of position precision for function
parameters (which were all declared at the last parameter's position),
and required some clumsy workarounds in bimport.go.
This CL changes declare to leave n.Pos alone and also fixes a few
places where n.Pos was not being set correctly.
Change-Id: Ibe5b5fd30609c684367207df701f9a1bfa82867f
Reviewed-on: https://go-review.googlesource.com/104275
Reviewed-by: Robert Griesemer <gri@golang.org>
Don't report errors if we don't have a correct type switch
guard; instead ignore it and leave it to the type-checker
to report the error. This leads to better error messages
concentrating on the type switch guard rather than errors
around (confusing) syntactic details.
Also clean up some code setting up AssertExpr (they never
have a nil Type field) and remove some incorrect TODOs.
Fixes#24470.
Change-Id: I69512f36e0417e3b5ea9c8856768e04b19d654a8
Reviewed-on: https://go-review.googlesource.com/103615
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
s/Thearch/thearch/
This reduces the amount of exported global variables,
which in turn could make it easier to refactor them later.
Also updated somewhat vague comment about ld.Thearch.
There is no need for Thearch to be exported as Archinit is
called by ld.Main.
Updates #22095
Change-Id: I266b291f6eac0165f70c51964738206e066cea08
Reviewed-on: https://go-review.googlesource.com/103878
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
No need to disambiguate if we're exporting or reexporting, because
it's obvious from the output.
Change-Id: I59053d34dc6f8b29e20749c7b03c3cb4f4d641ff
Reviewed-on: https://go-review.googlesource.com/104236
Reviewed-by: Robert Griesemer <gri@golang.org>
We used to have three Sym flags for dealing with export/reexport:
Export, Package, and Exported.
Export and Package were used to distinguish whether a symbol is
exported or package-scope (i.e., mutually exclusive), except that for
local declarations Export served double-duty as tracking whether the
symbol had been added to exportlist.
Meanwhile, imported declarations that needed reexporting could be
added to exportlist multiple times, necessitating a flag to track
whether they'd already been written out by exporter.
Simplify all of these into a single OnExportList flag so that we can
ensure symbols on exportlist are present exactly once. Merge
reexportsym into exportsym so there's a single place where we append
to exportlist.
Code that used to set Exported to prevent a symbol from being exported
can now just set OnExportList before calling declare to prevent it
from even appearing on exportlist.
Lastly, drop the IsAlias check in exportsym: we call exportsym too
early for local symbols to detect if they're an alias, and we never
reexport aliases.
Passes toolstash-check.
Change-Id: Icdea3719105dc169fcd7651606589cd08b0a80ff
Reviewed-on: https://go-review.googlesource.com/103865
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Currently, we reexport any package-scope constant, function, type, or
variable declarations needed by an inlineable function body. However,
now that we have an early pass to walk inlineable function bodies
(golang.org/cl/74110), we can simplify the logic for finding these
declarations.
The binary export format supports writing out type declarations
in-place at their first use. Also, it always writes out constants by
value, so their declarations never need to be reexported.
Notably, we attempted this before (golang.org/cl/36170) and had to
revert it (golang.org/cl/45911). However, this was because while
writing out inline bodies, we could discover variable/function
dependencies. By collecting variable/function dependencies during
inlineable function discovery, we avoid this problem.
While here, get rid of isInlineable. We already typecheck inlineable
function bodies during inlFlood, so it's become a no-op. Just move the
comment explaining parameter numbering to its caller.
Change-Id: Ibbfaafce793733675d3a2ad98791758583055666
Reviewed-on: https://go-review.googlesource.com/103864
Reviewed-by: Robert Griesemer <gri@golang.org>
Rather than checking for each function whether the package supports
instrumentation, check once up front.
Relatedly, tweak the logic for preventing inlining calls to runtime
functions from instrumented packages. Previously, we simply disallowed
inlining runtime functions altogether when instrumenting. With this
CL, it's only disallowed from packages that are actually being
instrumented. That is, now intra-runtime calls can be inlined.
Updates #19054.
Change-Id: I88c97b48bf70193a8a3ee18d952dcb26b0369d55
Reviewed-on: https://go-review.googlesource.com/102815
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Fixes#24645
Change-Id: I914674451b6667c3ebaf012893503d9de58991ee
Reviewed-on: https://go-review.googlesource.com/104155
Run-TryBot: Giovanni Bajo <rasky@develer.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Before, if an underlying writer errored within 10 bytes (plus any gzip
header metadata), a gzip.Write would erroneously report up to 10 bytes
written that were not actually written of the input slice. This is
especially problematic when the input slice is less than 10 bytes.
The error came from counting the 10 header byte write. If writing the
header is completely successful, the 10 bytes written is overridden by
the flate write with the input slice.
This removes counting the 10 required header bytes, and also changes the
return to use zero until the slice is used.
The old Write could return one byte written when it actually was not.
This is difficult to verify because the smallest input slice is one
byte; a test checking that the input slice was the byte written would be
quite involved. Thankfully, gzip's minimum header write is 10 bytes. If
we test that two bytes are not falsely written, we indirectly cover the
one byte case.
Fixes#24625
Change-Id: I1c1f8cd791e0c4cffc22aa8acd95186582c832ba
Reviewed-on: https://go-review.googlesource.com/103861
Reviewed-by: Joe Tsai <joetsai@google.com>
Run-TryBot: Joe Tsai <joetsai@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When test/run script was removed, these two tests
were changed to be executed by test/run.go.
Because errchk does not exit with non-zero status on
errors, they were silently failing for a while.
This change makes 2 things:
1. Compile tested packages in GOROOT/test to match older runner script
behavior (strictly required only in bug345, optional in bug248)
2. Check command output with "(?m)^BUG" regexp.
It approximates older `grep -q '^BUG' that was used before.
See referenced issue for detailed explanation.
Fixes#24629
Change-Id: Ie888dcdb4e25cdbb19d434bbc5cb03eb633e9ee8
Reviewed-on: https://go-review.googlesource.com/104095
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Eliminates an inconsistency between user functions and generated
functions.
Passes toolstash-check.
Change-Id: I946b511ca81d88a0024b5932cb50f3d8b9e808f4
Reviewed-on: https://go-review.googlesource.com/103863
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Extract all rewrite-to-OLITERAL expressions to use a single setconst
helper function.
Does not pass toolstash-check for two reasons:
1) We now consistently clear Left/Right/etc when rewriting Nodes into
OLITERALs, which results in their inlining complexity being correctly
computed. So more functions can now be inlined.
2) We preserve Pos, so PC line tables change somewhat.
Change-Id: I2b5c293bee7c69c2ccd704677f5aba4ec40e3155
Reviewed-on: https://go-review.googlesource.com/103860
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
When the flag package first begin printing nonzero defaults, the test
was against a fixed set of string representations of zero values.
This worked until the string representation of a time.Duration
changed from "0" to "0s", causing the zero Duration to register as
nonzero. The flag package then added reflect-based code that fell back
to the old test. This failed to work when a nonzero default for a flag
happened to be the string representation of one the original fixed set
of zero values in the original test. This change removes the original
test, allowing the reflect-based code to be the only deciding factor.
Fixes#23543
Change-Id: I582ce554d6729e336fdd96fb27340674c15350d8
Reviewed-on: https://go-review.googlesource.com/103867
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This reverts commit CL 103975 (a9b799a229).
Reason for revert: adds data race, breaks race builders, and Brad forgot
to run the Trybots.
Change-Id: Id227dad7069560dbb3ea978a1dcd77ce1979034e
Reviewed-on: https://go-review.googlesource.com/104015
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
