Currently, for the special field tracking symbol go.track.XXX,
when they are reachable, we set its type to SCONST. There is no
need to do that. Just leave it unset (as Sxxx). The symbol is
done after this point.
Change-Id: I966d80775008f7fb5d30fbc6b9e4a30ae8316b6c
Reviewed-on: https://go-review.googlesource.com/c/go/+/233998
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Don't include SCONST symbols in the symbol table when
NotInSymbolTable is set. This is what the old code (genasmsym)
does.
In fact, SCONST symbol is only emitted by the field tracking
code, and is always NotInSymbolTable. So we should just not
include them at all, or not generate SCONST symbols at all. But
at this late stage I'll just restore the old behavior.
Change-Id: If6843003e16701d45b8c67b2297098a7babdec52
Reviewed-on: https://go-review.googlesource.com/c/go/+/233997
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently maxOffAddr is defined in terms of the whole 64-bit address
space, assuming that it's all supported, by using ^uintptr(0) as the
maximal address in the offset space. In reality, the maximal address in
the offset space is (1<<heapAddrBits)-1 because we don't have more than
that actually available to us on a given platform.
On most platforms this is fine, because arenaBaseOffset is just
connecting two segments of address space, but on AIX we use it as an
actual offset for the starting address of the available address space,
which is limited. This means using ^uintptr(0) as the maximal address in
the offset address space causes wrap-around, especially when we just
want to represent a range approximately like [addr, infinity), which
today we do by using maxOffAddr.
To fix this, we define maxOffAddr more appropriately, in terms of
(1<<heapAddrBits)-1.
This change also redefines arenaBaseOffset to not be the negation of the
virtual address corresponding to address zero in the virtual address
space, but instead directly as the virtual address corresponding to
zero. This matches the existing documentation more closely and makes the
logic around arenaBaseOffset decidedly simpler, especially when trying
to reason about its use on AIX.
Fixes#38966.
Change-Id: I1336e5036a39de846f64cc2d253e8536dee57611
Reviewed-on: https://go-review.googlesource.com/c/go/+/233497
Run-TryBot: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
CL 233857 fixed the underlying issue for #37246,
which had arisen again as #38916.
Add the test case from #37246 to ensure it stays fixed.
Fixes#37246
Change-Id: If7fd75a096d2ce4364dc15509253c3882838161d
Reviewed-on: https://go-review.googlesource.com/c/go/+/233941
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Munday <mike.munday@ibm.com>
When tuple generators and selectors are eliminated as part of the
CSE pass we may end up with tuple selectors that are in different
blocks to the tuple generators that they correspond to. This breaks
the invariant that tuple generators and their corresponding
selectors must be in the same block. Therefore after CSE this
situation must be corrected.
Unfortunately the fixup code did not take into account that selectors
could be eliminated by CSE. It assumed that only the tuple generators
could be eliminated. In some situations this meant that it got into
a state where it was replacing references to selectors with references
to dead selectors in the wrong block.
To fix this we move the fixup code after the CSE rewrites have been
applied. This removes any difficult-to-reason-about interactions
with the CSE rewriter.
Fixes#38916.
Change-Id: I2211982dcdba399d03299f0a819945b3eb93b291
Reviewed-on: https://go-review.googlesource.com/c/go/+/233857
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
- Avoid starting subprocesses when the test is already very close to
timing out. The overhead of starting and stopping processes may
cause the test to exceed its deadline even if each individual
process is signaled soon after it is started.
- If a command does not shut down quickly enough after receiving
os.Interrupt, send it os.Kill using the same style of grace period
as in CL 228438.
- Fail the test if a background command whose exit status is not
ignored is left running at the end of the test. We have no reliable
way to distinguish a failure due to the termination signal from an
unexpected failure, and the termination signal varies across
platforms (so may cause failure on one platform but success on
another).
For #38797
Change-Id: I767898cf551dca45579bf01a9d1bb312e12d6193
Reviewed-on: https://go-review.googlesource.com/c/go/+/233526
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Use uint32 consistently for local index (this is what the object
file uses).
Use a index, instead of a pointer, to refer to the object file.
This reduces memory usage and GC work.
This reduces some allocations. Linking cmd/compile,
name old alloc/op new alloc/op delta
Loadlib_GC 19.9MB ± 0% 16.9MB ± 0% -15.33% (p=0.008 n=5+5)
name old live-B new live-B delta
Loadlib_GC 12.6M ± 0% 11.3M ± 0% -9.97% (p=0.008 n=5+5)
Change-Id: I20ce60bbb6d31abd2e9e932bdf959e2ae840ab98
Reviewed-on: https://go-review.googlesource.com/c/go/+/233779
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
While reviewing CL 228784, I noticed that various filepath.WalkFunc
implementations within cmd/go were dropping non-nil errors.
Those errors turn out to be significant, at least in some cases: for
example, they can cause packages to appear to be missing when any
parent of the directory had the wrong permissions set.
(This also turned up a bug in the existing list_dedup_packages test,
which was accidentally passing a nonexistent directory instead of the
intended duplicate path.)
Change-Id: Ia09a0a33aa7a966d9f132d3747d6c674a5370b2d
Reviewed-on: https://go-review.googlesource.com/c/go/+/232579
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
As per discussion on the accepted proposals, enable these vet checks by
default in the go command. Update corresponding documentation as well.
Updates #32479.
Updates #4483.
Change-Id: Ie93471930c24dbb9bcbf7da5deaf63bc1a97a14f
Reviewed-on: https://go-review.googlesource.com/c/go/+/232660
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
- Don't assume that a process interrupted at 100μs intervals will have
enough remaining time to make progress. (Stop sending signals
in between signal storms to allow the process to quiesce.)
- Don't assume that a child process that spins for 1ms will block long
enough for the parent process to receive signals or make meaningful
progress. (Instead, have the child block indefinitely, and unblock
it explicitly after the signal storm.)
For #39043
Updates #22838
Updates #20400
Change-Id: I85cba23498c346a637e6cfe8684ca0c478562a93
Reviewed-on: https://go-review.googlesource.com/c/go/+/233877
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Remove the loader's PropagateSymbolChangesBackToLoader and
PropagateLoaderChangesToSymbols shim functions. These were used at one
point to enable conversion of phases in the linker that were
"downstream" of loadlibfull -- given the current wavefront position
there's not much point keeping them around.
Change-Id: I3f01f25b70b1b80240369c8f3a10dca89931610f
Reviewed-on: https://go-review.googlesource.com/c/go/+/233817
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We have the information from auxs. Remove the field, slightly
reduce memory usage.
Change-Id: I3881777cfb40b03d0e2b0e7a326b0738080548b0
Reviewed-on: https://go-review.googlesource.com/c/go/+/233778
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Now we no longer create loader.Syms array on most platforms. Use
NSym(), instead of len(Syms), for the number of symbols in -v
log.
Change-Id: I8538c00d9c196b701d154eb7d04d911ee2cad73c
Reviewed-on: https://go-review.googlesource.com/c/go/+/233777
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Minor renaming cleanup to get rid of a couple of old sym.Symbol
adddynrel helpers and rename the current crop of adddynrel2
methods/functions back to adddynrel.
Change-Id: I67e76decff84d603ef765f3b6a0cd78c7f3743ec
Reviewed-on: https://go-review.googlesource.com/c/go/+/233523
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This updates vendored x/arch/ppc64 to pick up new instructions
and fixes for objdump on ppc64/ppc64le.
Change-Id: I8262e8a2af09057bbd21b39c9fcf37230029cfe8
Reviewed-on: https://go-review.googlesource.com/c/go/+/233364
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Adds in support for remaining architectures to the linker's ELF asmb2
path, along with deleting most of the older sym.Symbol based code.
Change-Id: I67c96525db72b7d6dd3187cf2b9f6faddc296291
Reviewed-on: https://go-review.googlesource.com/c/go/+/233362
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This patch converts the linker's Asmb2 phase to use loader APIs
for AMD64 (other architectures to be converted in a subsequent
patch).
Change-Id: I5a9aa9b03769cabc1a22b982f48fd113213d7bcf
Reviewed-on: https://go-review.googlesource.com/c/go/+/233338
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Historically we've assumed that we can install all signal handlers
with the SA_RESTART flag set, and let the system restart slow functions
if a signal is received. Therefore, we don't have to worry about EINTR.
This is only partially true, and we've added EINTR checks already for
connect, and open/read on Darwin, and sendfile on Solaris.
Other cases have turned up in #36644, #38033, and #38836.
Also, #20400 points out that when Go code is included in a C program,
the C program may install its own signal handlers without SA_RESTART.
In that case, Go code will see EINTR no matter what it does.
So, go ahead and check for EINTR. We don't check in the syscall package;
people using syscalls directly may want to check for EINTR themselves.
But we do check for EINTR in the higher level APIs in os and net,
and retry the system call if we see it.
This change looks safe, but of course we may be missing some cases
where we need to check for EINTR. As such cases turn up, we can add
tests to runtime/testdata/testprogcgo/eintr.go, and fix the code.
If there are any such cases, their handling after this change will be
no worse than it is today.
For #22838Fixes#20400Fixes#36644Fixes#38033Fixes#38836
Change-Id: I7e46ca8cafed0429c7a2386cc9edc9d9d47a6896
Reviewed-on: https://go-review.googlesource.com/c/go/+/232862
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Taking over Zach's CL 212277. Just cleaned up and added a test.
For a positive, signed integer, an arithmetic right shift of count
(bit-width - 1) equals zero. e.g. int64(22) >> 63 -> 0. This CL makes
prove replace these right shifts with a zero-valued constant.
These shifts may arise in source code explicitly, but can also be
created by the generic rewrite of signed division by a power of 2.
// Signed divide by power of 2.
// n / c = n >> log(c) if n >= 0
// = (n+c-1) >> log(c) if n < 0
// We conditionally add c-1 by adding n>>63>>(64-log(c))
(first shift signed, second shift unsigned).
(Div64 <t> n (Const64 [c])) && isPowerOfTwo(c) ->
(Rsh64x64
(Add64 <t> n (Rsh64Ux64 <t>
(Rsh64x64 <t> n (Const64 <typ.UInt64> [63]))
(Const64 <typ.UInt64> [64-log2(c)])))
(Const64 <typ.UInt64> [log2(c)]))
If n is known to be positive, this rewrite includes an extra Add and 2
extra Rsh. This CL will allow prove to replace one of the extra Rsh with
a 0. That replacement then allows lateopt to remove all the unneccesary
fixups from the generic rewrite.
There is a rewrite rule to handle this case directly:
(Div64 n (Const64 [c])) && isNonNegative(n) && isPowerOfTwo(c) ->
(Rsh64Ux64 n (Const64 <typ.UInt64> [log2(c)]))
But this implementation of isNonNegative really only handles constants
and a few special operations like len/cap. The division could be
handled if the factsTable version of isNonNegative were available.
Unfortunately, the first opt pass happens before prove even has a
chance to deduce the numerator is non-negative, so the generic rewrite
has already fired and created the extra Ops discussed above.
Fixes#36159
By Printf count, this zeroes 137 right shifts when building std and cmd.
Change-Id: Iab486910ac9d7cfb86ace2835456002732b384a2
Reviewed-on: https://go-review.googlesource.com/c/go/+/232857
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
... and 0-31 for 32-bit shifts.
Generally update the docs for ppc64 shift instructions to be
clearer about what they actually do.
This issue is causing problems for the subsequent CL. The shift
amount was <0 and caused the assembler to report an invalid instruction.
Change-Id: I8c708a15e7f71931835e6e543d8db3c716186e52
Reviewed-on: https://go-review.googlesource.com/c/go/+/232858
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Fix the mode parameter to fallocate on Linux which is the operation mode
and not the file mode as with os.OpenFile.
Also handle syscall.EINTR.
Fixes#38950
Change-Id: Ieed20d9ab5c8a49be51c9f9a42b7263f394a5261
Reviewed-on: https://go-review.googlesource.com/c/go/+/232805
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Make use of multi-control values and branch pseudo-instructions to optimise
compiler generated branches.
Change-Id: I7a8bf754db3c2082a390bf6a662ccf18cbcbee39
Reviewed-on: https://go-review.googlesource.com/c/go/+/226400
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Old url 404s because the file no longer exists on master; change it to
point to the android 10 release branch.
Change-Id: If0f8b645f2c746f9fc8bbd68f4d1fe41868493ba
Reviewed-on: https://go-review.googlesource.com/c/go/+/232809
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Only enable broadcast on SOCK_DGRAM and SOCK_RAW sockets, SOCK_STREAM
and others don't support it.
Don't enable SO_BROADCAST on UNIX domain sockets as they don't support it.
This caused failures on WSL which strictly checks setsockopt calls
unlike other OSes which often silently ignore bad options.
Also return error for setsockopt call for SO_BROADCAST on Windows
matching all other platforms but for IPv4 only as it's not supported
on IPv6 as per:
https://docs.microsoft.com/en-us/windows/win32/winsock/socket-optionsFixes#38954
Change-Id: I0503fd1ce96102b17121af548b66b3e9c2bb80d3
Reviewed-on: https://go-review.googlesource.com/c/go/+/232807
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Before this commit, the code declares and assigns "n" with the result of
io.ReadFull() -- but the value is not used. The variable is then reused
later in the function.
This commit removes the first declaration of "n" and declares it closer
to where it is used.
Change-Id: I7ffe19a10f2a563c306bb6fe6562493435b9dc5a
Reviewed-on: https://go-review.googlesource.com/c/go/+/232917
Reviewed-by: Rob Pike <r@golang.org>
testing.M.Run has this bit of code:
if !flag.Parsed() {
flag.Parse()
}
It makes sense, and it's common knowledge for many Go developers that
test flags are automatically parsed by the time tests and benchmarks are
run. However, the docs didn't clarify that. The previous wording only
mentioned that flag.Parse isn't run before TestMain, which doesn't
necessarily mean that it's run afterwards.
Fixes#38952.
Change-Id: I85f7a9dce637a23c5cb9abc485d47415c1a1ca27
Reviewed-on: https://go-review.googlesource.com/c/go/+/232806
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When we decode into a struct, each input key-value may be decoded into
one of the struct's fields. Particularly, existing data isn't dropped,
so that some sub-fields can be decoded into without zeroing all other
data.
However, decoding into a map behaved in the opposite way. Whenever a
key-value was decoded, it completely replaced the previous map element.
If the map contained any non-zero data in that key, it's dropped.
Instead, try to reuse the existing element value if possible. If the map
element type is a pointer, and the value is non-nil, we can decode
directly into it. If it's not a pointer, make a copy and decode into
that copy, as map element values aren't addressable.
This means we have to parse and convert the map element key before the
value, to be able to obtain the existing element value. This is fine,
though. Moreover, reporting errors on the key before the value follows
the input order more closely.
Finally, add a test to explore the four combinations, involving pointer
and non-pointer, and non-zero and zero values. A table-driven test
wasn't used, as each case required different checks, such as checking
that the non-nil pointer case doesn't end up with a different pointer.
Fixes#31924.
Change-Id: I5ca40c9963a98aaf92f26f0b35843c021028dfca
Reviewed-on: https://go-review.googlesource.com/c/go/+/179337
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The BITCON test, isbitcon, assumes 32-bit constants are expanded
repeatedly, i.e. by copying the low 32 bits to high 32 bits,
instead of zero extending. We already do such expansion in
progedit. In con32class when classifying 32-bit constants, we
should use the expanded constant, instead of zero-extending it.
TODO: we could have better encoding for things like ANDW $-1, Rx.
Fixes#38946.
Change-Id: I37d0c95d744834419db5c897fd1f6c187595c926
Reviewed-on: https://go-review.googlesource.com/c/go/+/232984
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Improve the error user experience when users try to set/refer
to unexported fields and methods of struct literals, by directly saying
"cannot refer to unexported field or method"
Fixes#31053
Change-Id: I6fd3caf64b7ca9f9d8ea60b7756875e340792d59
Reviewed-on: https://go-review.googlesource.com/c/go/+/201657
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The recently added function parseFloatPrefix tested the entire
string for correct placement of separators rather than just the
consumed part. The 4-char fix is in readFloat (atof.go:303).
Added more tests. Also added some white space for nicer
grouping of the test cases.
While at it, removed the need for calling testing.Run.
Fixes#38962.
Change-Id: Ifce84f362bb4ede559103f8d535556d3de9325f1
Reviewed-on: https://go-review.googlesource.com/c/go/+/233017
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Omits printing the file:line:column when trying to
open non-existent files
Given:
go tool compile x.go
* Before:
x.go:0: open x.go: no such file or directory
* After:
open x.go: no such file or directory
Reverts the revert in CL 231043 by only fixing the case
of non-existent errors which is what the original bug
was about. The fix for "permission errors" will come later
on when I have bandwidth to investigate the differences
between running with root and why os.Open works for some
builders and not others.
Fixes#36437
Change-Id: I9c8a0981ad708b504bb43990a4105b42266fa41f
Reviewed-on: https://go-review.googlesource.com/c/go/+/230941
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Fix TestFreeBSDNumCPU on newer versions of FreeBSD which have multi line
output from cpuset e.g.
cpuset -g -p 4141
pid 4141 mask: 0, 1, 2, 3, 4, 5, 6, 7, 8
pid 4141 domain policy: first-touch mask: 0, 1
The test now uses just the first line of output.
Fixes#38937Fixes#25924
Change-Id: If082ee6b82120ebde4dc437e58343b3dad69c65f
Reviewed-on: https://go-review.googlesource.com/c/go/+/232801
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
We use the new one everywhere now.
Change-Id: Ic9b1314e71e4666500cbf1689bb93839e040682a
Reviewed-on: https://go-review.googlesource.com/c/go/+/232982
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Now we no longer do loadlibfull on windows.
Change-Id: Ideb015597c28f27538bd50829e089ea728017162
Reviewed-on: https://go-review.googlesource.com/c/go/+/232979
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
The added comment contains some context. The original optimization
assumed that each call to unquoteBytes (or unquote) followed its
corresponding call to rescanLiteral. Otherwise, unquoting a literal
might use d.safeUnquote from another re-scanned literal.
Unfortunately, this assumption is wrong. When decoding {"foo": "bar"}
into a map[T]string where T implements TextUnmarshaler, the sequence of
calls would be as follows:
1) rescanLiteral "foo"
2) unquoteBytes "foo"
3) rescanLiteral "bar"
4) unquoteBytes "foo" (for UnmarshalText)
5) unquoteBytes "bar"
Note that the call to UnmarshalText happens in literalStore, which
repeats the work to unquote the input string literal. But, since that
happens after we've re-scanned "bar", we're using the wrong safeUnquote
field value.
In the added test case, the second string had a non-zero number of safe
bytes, and the first string had none since it was all non-ASCII. Thus,
"safely" unquoting a number of the first string's bytes could cut a rune
in half, and thus mangle the runes.
A rather simple fix, without a full revert, is to only allow one use of
safeUnquote per call to unquoteBytes. Each call to rescanLiteral when
we have a string is soon followed by a call to unquoteBytes, so it's no
longer possible for us to use the wrong index.
Also add a test case from #38126, which is the same underlying bug, but
affecting the ",string" option.
Before the fix, the test would fail, just like in the original two issues:
--- FAIL: TestUnmarshalRescanLiteralMangledUnquote (0.00s)
decode_test.go:2443: Key "开源" does not exist in map: map[开���:12345开源]
decode_test.go:2458: Unmarshal unexpected error: json: invalid use of ,string struct tag, trying to unmarshal "\"aaa\tbbb\"" into string
Fixes#38105.
For #38126.
Change-Id: I761e54924e9a971a4f9eaa70bbf72014bb1476e6
Reviewed-on: https://go-review.googlesource.com/c/go/+/226218
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
