The liveness computation of parameters generally was never
correct, but forcing all parameters to be live throughout the
function covered up that problem. The new SSA back end is
too clever: even though it currently keeps the parameter values live
throughout the function, it may find optimizations that mean
the current values are not written back to the original parameter
stack slots immediately or ever (for example if a parameter is set
to nil, SSA constant propagation may replace all later uses of the
parameter with a constant nil, eliminating the need to write the nil
value back to the stack slot), so the liveness code must now
track the actual operations on the stack slots, exposing these
problems.
One small problem in the handling of arguments is that nodarg
can return ONAME PPARAM nodes with adjusted offsets, so that
there are actually multiple *Node pointers for the same parameter
in the instruction stream. This might be possible to correct, but
not in this CL. For now, we fix this by using n.Orig instead of n
when considering PPARAM and PPARAMOUT nodes.
The major problem in the handling of arguments is general
confusion in the liveness code about the meaning of PPARAM|PHEAP
and PPARAMOUT|PHEAP nodes, especially as contrasted with PAUTO|PHEAP.
The difference between these two is that when a local variable "moves"
to the heap, it's really just allocated there to start with; in contrast,
when an argument moves to the heap, the actual data has to be copied
there from the stack at the beginning of the function, and when a
result "moves" to the heap the value in the heap has to be copied
back to the stack when the function returns
This general confusion is also present in the SSA back end.
The PHEAP bit worked decently when I first introduced it 7 years ago (!)
in 391425ae. The back end did nothing sophisticated, and in particular
there was no analysis at all: no escape analysis, no liveness analysis,
and certainly no SSA back end. But the complications caused in the
various downstream consumers suggest that this should be a detail
kept mainly in the front end.
This CL therefore eliminates both the PHEAP bit and even the idea of
"heap variables" from the back ends.
First, it replaces the PPARAM|PHEAP, PPARAMOUT|PHEAP, and PAUTO|PHEAP
variable classes with the single PAUTOHEAP, a pseudo-class indicating
a variable maintained on the heap and available by indirecting a
local variable kept on the stack (a plain PAUTO).
Second, walkexpr replaces all references to PAUTOHEAP variables
with indirections of the corresponding PAUTO variable.
The back ends and the liveness code now just see plain indirected
variables. This may actually produce better code, but the real goal
here is to eliminate these little-used and somewhat suspect code
paths in the back end analyses.
The OPARAM node type goes away too.
A followup CL will do the same to PPARAMREF. I'm not sure that
the back ends (SSA in particular) are handling those right either,
and with the framework established in this CL that change is trivial
and the result clearly more correct.
Fixes#15747.
Change-Id: I2770b1ce3cbc93981bfc7166be66a9da12013d74
Reviewed-on: https://go-review.googlesource.com/23393
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The importer had several bugs with respect to labels and gotos:
- it didn't create a new ONAME node for label names (label dcl,
goto, continue, and break)
- it overwrote the symbol for gotos with the dclstack
- it didn't set the dclstack for labels
In the process changed export format slightly to always assume
a label name for labels and gotos, and never assume a label for
fallthroughs.
For fallthroughs and switch cases, now also set Xoffset like in
the parser. (Not setting it, i.e., using 0 was ok since this is
only used for verifying correct use of fallthroughs, which was
checked already. But it's an extra level of verification of the
import.)
Fixes#15838.
Change-Id: I3637f6314b8651c918df0c8cd70cd858c92bd483
Reviewed-on: https://go-review.googlesource.com/23445
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
CL 21462 and CL 21463 made this message say explicitly that the problem
was a struct field in a map, but the word "directly" is unnecessary,
sounds wrong, and makes the error long.
Change-Id: I2fb68cdaeb8bd94776b8022cf3eae751919ccf6f
Reviewed-on: https://go-review.googlesource.com/23373
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Non-syntax errors are always counted to determine if to exit
early, but then deduplication eliminates them. This can lead
to situations which report "too many errors" and only one
error is shown.
De-duplicate non-syntax errors early, at least the ones that
appear consecutively, and only count the ones actually being
shown. This doesn't work perfectly as they may not appear in
sequence, but it's cheap and good enough.
Fixes#14136.
Change-Id: I7b11ebb2e1e082f0d604b88e544fe5ba967af1d7
Reviewed-on: https://go-review.googlesource.com/23259
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
They get rewritten to NEWs, and they must be marked as escaping
so walk doesn't try to allocate them back onto the stack.
Fixes#15733
Change-Id: I433033e737c3de51a9e83a5a273168dbc9110b74
Reviewed-on: https://go-review.googlesource.com/23223
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Run live vars test only on ssa builds.
We can't just drop KeepAlive ops during regalloc. We need
to replace them with copies.
Change-Id: Ib4b3b1381415db88fdc2165fc0a9541b73ad9759
Reviewed-on: https://go-review.googlesource.com/23225
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Introduce a KeepAlive op which makes sure that its argument is kept
live until the KeepAlive. Use KeepAlive to mark pointer input
arguments as live after each function call and at each return.
We do this change only for pointer arguments. Those are the
critical ones to handle because they might have finalizers.
Doing compound arguments (slices, structs, ...) is more complicated
because we would need to track field liveness individually (we do
that for auto variables now, but inputs requires extra trickery).
Turn off the automatic marking of args as live. That way, when args
are explicitly nulled, plive will know that the original argument is
dead.
The KeepAlive op will be the eventual implementation of
runtime.KeepAlive.
Fixes#15277
Change-Id: I5f223e65d99c9f8342c03fbb1512c4d363e903e5
Reviewed-on: https://go-review.googlesource.com/22365
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
Previously statements like
f(unsafe.Pointer(g()), int(h()))
would be reordered into a sequence of statements like
autotmp_g := g()
autotmp_h := h()
f(unsafe.Pointer(autotmp_g), int(autotmp_h))
which can leave g's temporary value on the stack as a uintptr, rather
than an unsafe.Pointer. Instead, recognize uintptr-to-unsafe.Pointer
conversions when reordering function calls to instead produce:
autotmp_g := unsafe.Pointer(g())
autotmp_h := h()
f(autotmp_g, int(autotmp_h))
Fixes#15329.
Change-Id: I2cdbd89d233d0d5c94791513a9fd5fd958d11ed5
Reviewed-on: https://go-review.googlesource.com/22273
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
See #15604. This was a bug in a CL that has since been
rolled back. Adding a test to challenge the next attempter.
Change-Id: Ic43be254ea6eaab0071018cdc61d9b1c21f19cbf
Reviewed-on: https://go-review.googlesource.com/23000
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
In regalloc, a sparse map is preallocated for later use by
spill-in-loop sinking. However, variables (spills) are added
during register allocation before spill sinking, and a map
query involving any of these new variables will index out of
bounds in the map.
To fix:
1) fix the queries to use s.orig[v.ID].ID instead, to ensure
proper indexing. Note that s.orig will be nil for values
that are not eligible for spilling (like memory and flags).
2) add a test.
Fixes#15585.
Change-Id: I8f2caa93b132a0f2a9161d2178320d5550583075
Reviewed-on: https://go-review.googlesource.com/22911
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This flag is experimental and the semantics may change
even after Go 1.7 is released. There are no changes to code
not using the flag.
The first part is for reading by future compiles.
The second part is for reading by the final link step.
Splitting the file this way allows distributed build systems
to ship the compile-input part only to compile steps and
the linker-input part only to linker steps.
The first part is basically just the export data,
and the second part is basically everything else.
The overall files still have the same broad structure,
so that existing tools will work with both halves.
It's just that various pieces are empty in the two halves.
This also copies the two bits of data the linker needed from
export data into the object header proper, so that the linker
doesn't need any export data at all. That eliminates a TODO
that was left for switching to the binary export data.
(Now the linker doesn't need to know about the switch.)
The default is still to write out a combined output file.
Nothing changes unless you pass -linkobj to the compiler.
There is no support in the go command for -linkobj,
since the go command doesn't copy objects around.
The expectation is that other build systems (like bazel, say)
might take advantage of this.
The header adjustment and the option for the split output
was intended as part of the zip archives, but the zip archives
have been cut from Go 1.7. Doing this to the current archives
both unblocks one step in the switch to binary export data
and enables alternate build systems to experiment with the
new flag using the Go 1.7 release.
Change-Id: I8b6eab25b8a22b0a266ba0ac6d31e594f3d117f3
Reviewed-on: https://go-review.googlesource.com/22500
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The problem was fixed by the rollback in CL 22930.
This CL just adds a test to prevent regressions.
Fixes#15602
Change-Id: I37453f6e18ca43081266fe7f154c6d63fbaffd9b
Reviewed-on: https://go-review.googlesource.com/22931
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The new export format keeps track of all types that are exported.
If a type is seen that was exported before, only a reference to
that type is emitted. The importer maintains a list of all the
seen types and uses that list to resolve type references.
The existing compiler infrastructure's invariants assumes that
only named types are referred to before they are fully set up.
Referring to unnamed incomplete types causes problems. One of
the issues was #15548.
Added a new internal flag 'trackAllTypes' to enable/disable
this type tracking. With this change only named types are
tracked.
Verified that this fix also addresses #15548, even w/o the
prior fix for that issue (in fact that prior fix is turned
off if trackAllTypes is disabled because it's not needed).
The test for #15548 covers also this change.
For #15548.
Change-Id: Id0b3ff983629703d025a442823f99649fd728a56
Reviewed-on: https://go-review.googlesource.com/22839
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The boolean destination in an OAS2DOTTYPE expression craps out during
compilation when trying to assign to a map entry because, unlike slice entries,
map entries are not directly addressable in memory. The solution is to
properly order the boolean destination node so that map entries are set
via autotmp variables.
Fixes#14678
Change-Id: If344e8f232b5bdac1b53c0f0d21eeb43ab17d3de
Reviewed-on: https://go-review.googlesource.com/22833
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Accidentally checked in the version of file c.go that doesn't
exhibit the bug - hence the test was not testing the bug fix.
Double-checked that this version exposes the bug w/o the fix.
Change-Id: Ie4dc455229d1ac802a80164b5d549c2ad4d971f5
Reviewed-on: https://go-review.googlesource.com/22837
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
external linking is now supported.
Change-Id: I13e90c39dad86e60781adecdbe8e6bc9e522f740
Reviewed-on: https://go-review.googlesource.com/19811
Reviewed-by: Minux Ma <minux@golang.org>
This is necessary to avoid disrupting the go1 suite and gives
us a place to put other tests of basic compiler function and
correctness.
Change-Id: I36933819ff2bfe6a2121fff2be9a98efd2123d9a
Reviewed-on: https://go-review.googlesource.com/22597
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The underlying issues have been fixed.
All the individual fixes have their own tests,
but it's still useful to have a plain source test.
Fixes#15084
Change-Id: I06c485a7d0716201bd57d1f3be53668dddd7ec14
Reviewed-on: https://go-review.googlesource.com/22426
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This is a follow-up to CLs 19769 and 19770.
Change-Id: Ia9b71055613b80df4ce62b34fcc4f479f04f72fd
Reviewed-on: https://go-review.googlesource.com/22399
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
func f(x, y, z *int) {
a := []*int{x,y,z}
...
}
We used to use:
var tmp [3]*int
a := tmp[:]
a[0] = x
a[1] = y
a[2] = z
Now we do:
var tmp [3]*int
tmp[0] = x
tmp[1] = y
tmp[2] = z
a := tmp[:]
Doesn't sound like a big deal, but the compiler has trouble
eliminating write barriers when using the former method because it
doesn't know that the slice points to the stack. In the latter
method, the compiler knows the array is on the stack and as a result
doesn't emit any write barriers.
This turns out to be extremely common when building ... args, like
for calls fmt.Printf.
Makes go binaries ~1% smaller.
Doesn't have a measurable effect on the go1 fmt benchmarks,
unfortunately.
Fixes#14263
Update #6853
Change-Id: I9074a2788ec9e561a75f3b71c119b69f304d6ba2
Reviewed-on: https://go-review.googlesource.com/22395
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
See discussion at [1]. True value must have a fixed non-zero
representation meaning that a && b can be implemented as a & b.
[1] https://groups.google.com/forum/#!topic/golang-dev/xV0vPuFP9Vg
This change helps with m := a && b, but it's more common to see
if a && b { do something } which is not handled.
Change-Id: Ib6f9ff898a0a8c05d12466e2464e4fe781035394
Reviewed-on: https://go-review.googlesource.com/22313
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
They are guaranteed to be non-nil, no point in inserting
nil checks for them.
Fixes#15390
Change-Id: I3b9a0f2319affc2139dcc446d0a56c6785ae5a86
Reviewed-on: https://go-review.googlesource.com/22291
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
func f(a, b bool) bool {
return a || b
}
is now a single instructions (excluding loading and unloading the arguments):
v10 = ORB <bool> v11 v12 : AX
Change-Id: Iff63399410cb46909f4318ea1c3f45a029f4aa5e
Reviewed-on: https://go-review.googlesource.com/21872
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
The result of ODOTPTR, as well as a bunch of other ops,
should be the type of the result, not always a pointer type.
This fixes an amd64p32 bug where we were incorrectly truncating
a 64-bit slice index to 32 bits, and then barfing on a weird
load-64-bits-but-then-truncate-to-32-bits op that doesn't exist.
Fixes#15252
Change-Id: Ie62f4315fffd79f233e5449324ccc0879f5ac343
Reviewed-on: https://go-review.googlesource.com/22094
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Print numGC followed by numGC1, rather than printing numGC twice.
Change-Id: I8e7144b6a11d4ae9be0d82d88b86fed04b906e2f
Reviewed-on: https://go-review.googlesource.com/22087
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Map keys are currently validated in multiple locations but share
a common validation routine. The problem is that early validations
should be lenient enough to allow for forward types while the final
validations should not. The final validations should fail on forward
types since they've already settled.
This change also separates the key type checking from the creation
of the map via typMap. Instead of the mapqueue being populated in
copytype() by checking the map line number, it's populated in the
same block that validates the key type. This isolates key validation
logic while type checking.
Fixes#14988
Change-Id: Ia47cf6213585d6c63b3a35249104c0439feae658
Reviewed-on: https://go-review.googlesource.com/21830
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Removes 49 more bound checks in make.bash. For example:
var a[100]int
for i := 0; i < 50; i++ {
use a[i+25]
}
Change-Id: I85e0130ee5d07f0ece9b17044bba1a2047414ce7
Reviewed-on: https://go-review.googlesource.com/21379
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Be more careful about inserting instrumentation in racewalk.
If the node being instrumented is an OAS, and it has a non-
empty Ninit, then append instrumentation to the Ninit list
rather than letting it be inserted before the OAS (and the
compilation of its init list). This deals with the case that
the Ninit list defines a variable used in the RHS of the OAS.
Fixes#15091.
Change-Id: Iac91696d9104d07f0bf1bd3499bbf56b2e1ef073
Reviewed-on: https://go-review.googlesource.com/21771
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: David Chase <drchase@google.com>
Fails for the same reason as ppc64 and mips64 (incomplete
optimization).
Change-Id: Ieb4d997fc27d4f2b756e63dd7f588abe10c0213a
Reviewed-on: https://go-review.googlesource.com/20963
Reviewed-by: Bill O'Farrell <billotosyr@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Make sure the results of unsigned constant-folded
shifts are sign-extended into the AuxInt field.
Fixes#15175
Change-Id: I3490d1bc3d9b2e1578ed30964645508577894f58
Reviewed-on: https://go-review.googlesource.com/21586
Reviewed-by: Alexandru Moșoi <alexandru@mosoi.ro>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fold the comparison when the SHR result is small.
Useful for:
- murmur mix like hashing where higher bits are desirable, i.e. hash = uint32(i * C) >> 18
- integer log2 via DeBruijn sequence: http://graphics.stanford.edu/~seander/bithacks.html#IntegerLogDeBruijn
Change-Id: If70ae18cb86f4cc83ab6213f88ced03cc4986156
Reviewed-on: https://go-review.googlesource.com/21514
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Test goprint.go sometimes failed on a slow builder (plan9_arm)
because of timing dependency. Instead of sleeping for a fixed
time to allow the child goroutine to finish, wait explicitly for
child termination by calling runtime.NumGoroutine until the
returned value is 1.
Fixes#15097
Change-Id: Ib3ef5ec3c8277083c774542f48bcd4ff2f79efde
Reviewed-on: https://go-review.googlesource.com/21603
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
No point in doing anything for x=x assignments.
In addition, skipping these assignments prevents generating:
VARDEF x
COPY x -> x
which is bad because x is incorrectly considered
dead before the vardef.
Fixes#14904
Change-Id: I6817055ec20bcc34a9648617e0439505ee355f82
Reviewed-on: https://go-review.googlesource.com/21470
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
Missed a case for closure calls (OCALLFUNC && indirect) in
esc.go:esccall.
Cleanup to runtime code for windows to more thoroughly hide
a technical escape. Also made code pickier about failing
to late non-optional kernel32.dll.
Fixes#14409.
Change-Id: Ie75486a2c8626c4583224e02e4872c2875f7bca5
Reviewed-on: https://go-review.googlesource.com/20102
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Since BCE happens over several passes (opt, loopbce, prove)
it's easy to regress especially with rewriting.
The pass is only activated with special debug flag.
Change-Id: I46205982e7a2751156db8e875d69af6138068f59
Reviewed-on: https://go-review.googlesource.com/21510
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Identify this assignment case and instead of the more general error
prog.go:6: cannot assign to students["sally"].age
produce
prog.go:6: cannot directly assign to struct field students["sally"].age in map
that explains why the assignment is not possible.
Fixes#13779.
Change-Id: I90c10b445f907834fc1735aa66e44a0f447aa74f
Reviewed-on: https://go-review.googlesource.com/21462
Reviewed-by: David Chase <drchase@google.com>
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Change-Id: I91873aaebf79bdf1c00d38aacc1a1fb8d79656a7
Reviewed-on: https://go-review.googlesource.com/21433
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Handle this case:
if 0 <= i && i < len(a) {
use a[i]
}
Shaves about 5k from pkg/tools/linux_amd64/*.
Change-Id: I6675ff49aa306b0d241b074c5738e448204cd981
Reviewed-on: https://go-review.googlesource.com/21431
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The issue was seen when inlining an exported function that contained
a fallthrough statement.
Fixes#15071
Change-Id: I1e8215ad49d57673dba7e8f8bd2ed8ad290dc452
Reviewed-on: https://go-review.googlesource.com/21452
Reviewed-by: Dave Cheney <dave@cheney.net>
There are 5293 loop in the main go repository.
A survey of the top most common for loops:
18 for __k__ := 0; i < len(sa.Addr); i++ {
19 for __k__ := 0; ; i++ {
19 for __k__ := 0; i < 16; i++ {
25 for __k__ := 0; i < length; i++ {
30 for __k__ := 0; i < 8; i++ {
49 for __k__ := 0; i < len(s); i++ {
67 for __k__ := 0; i < n; i++ {
376 for __k__ := range __slice__ {
685 for __k__, __v__ := range __slice__ {
2074 for __, __v__ := range __slice__ {
The algorithm to find induction variables handles all cases
with an upper limit. It currently doesn't find related induction
variables such as c * ind or c + ind.
842 out of 22954 bound checks are removed for src/make.bash.
1957 out of 42952 bounds checks are removed for src/all.bash.
Things to do in follow-up CLs:
* Find the associated pointer for `for _, v := range a {}`
* Drop the NilChecks on the pointer.
* Replace the implicit induction variable by a loop over the pointer
Generated garbage can be reduced if we share the sdom between passes.
% benchstat old.txt new.txt
name old time/op new time/op delta
Template 337ms ± 3% 333ms ± 3% ~ (p=0.258 n=9+9)
GoTypes 1.11s ± 2% 1.10s ± 2% ~ (p=0.912 n=10+10)
Compiler 5.25s ± 1% 5.29s ± 2% ~ (p=0.077 n=9+9)
MakeBash 33.5s ± 1% 34.1s ± 2% +1.85% (p=0.011 n=9+9)
name old alloc/op new alloc/op delta
Template 63.6MB ± 0% 63.9MB ± 0% +0.52% (p=0.000 n=10+9)
GoTypes 218MB ± 0% 219MB ± 0% +0.59% (p=0.000 n=10+9)
Compiler 978MB ± 0% 985MB ± 0% +0.69% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
Template 582k ± 0% 583k ± 0% +0.10% (p=0.000 n=10+10)
GoTypes 1.78M ± 0% 1.78M ± 0% +0.12% (p=0.000 n=10+10)
Compiler 7.68M ± 0% 7.69M ± 0% +0.05% (p=0.000 n=10+10)
name old text-bytes new text-bytes delta
HelloSize 581k ± 0% 581k ± 0% -0.08% (p=0.000 n=10+10)
CmdGoSize 6.40M ± 0% 6.39M ± 0% -0.08% (p=0.000 n=10+10)
name old data-bytes new data-bytes delta
HelloSize 3.66k ± 0% 3.66k ± 0% ~ (all samples are equal)
CmdGoSize 134k ± 0% 134k ± 0% ~ (all samples are equal)
name old bss-bytes new bss-bytes delta
HelloSize 126k ± 0% 126k ± 0% ~ (all samples are equal)
CmdGoSize 149k ± 0% 149k ± 0% ~ (all samples are equal)
name old exe-bytes new exe-bytes delta
HelloSize 947k ± 0% 946k ± 0% -0.01% (p=0.000 n=10+10)
CmdGoSize 9.92M ± 0% 9.91M ± 0% -0.06% (p=0.000 n=10+10)
Change-Id: Ie74bdff46fd602db41bb457333d3a762a0c3dc4d
Reviewed-on: https://go-review.googlesource.com/20517
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
Added a debug flag "-d closure" to explain compilation of
closures (should this be done some other way? Should we
rewrite the "-m" flag to "-d escapes"?) Used this to
discover that cause was an OXXX node in the captured vars
list, and in turn noticed that OXXX nodes are explicitly
ignored in all other processing of captured variables.
Couldn't figure out a reproducer, did verify that this OXXX
was not caused by an unnamed return value (which is one use
of these). Verified lack of heap allocation by examining -S
output.
Assembly:
(runtime/mgc.go:1371) PCDATA $0, $2
(runtime/mgc.go:1371) CALL "".notewakeup(SB)
(runtime/mgc.go:1377) LEAQ "".gcBgMarkWorker.func1·f(SB), AX
(runtime/mgc.go:1404) MOVQ AX, (SP)
(runtime/mgc.go:1404) MOVQ "".autotmp_2242+88(SP), CX
(runtime/mgc.go:1404) MOVQ CX, 8(SP)
(runtime/mgc.go:1404) LEAQ go.string."GC worker (idle)"(SB), AX
(runtime/mgc.go:1404) MOVQ AX, 16(SP)
(runtime/mgc.go:1404) MOVQ $16, 24(SP)
(runtime/mgc.go:1404) MOVB $20, 32(SP)
(runtime/mgc.go:1404) MOVQ $0, 40(SP)
(runtime/mgc.go:1404) PCDATA $0, $2
(runtime/mgc.go:1404) CALL "".gopark(SB)
Added a check for compiling_runtime to ensure that this is
caught in the future. Added a test to test the check.
Verified that 1.5.3 did NOT reject the test case when
compiled with -+ flag, so this is not a recently added bug.
Cause of bug is two-part -- there was no leaking closure
detection ever, and instead it relied on capture-of-variables
to trigger compiling_runtime test, but closures improved in
1.5.3 so that mere capture of a value did not also capture
the variable, which thus allowed closures to escape, as well
as this case where the escape was spurious. In
fixedbugs/issue14999.go, compare messages for f and g;
1.5.3 would reject g, but not f. 1.4 rejects both because
1.4 heap-allocates parameter x for both.
Fixes#14999.
Change-Id: I40bcdd27056810628e96763a44f2acddd503aee1
Reviewed-on: https://go-review.googlesource.com/21322
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The change in 20907 fixed varexpr but broke aliased. After that change,
a reference to a field in a struct would not be seen as aliasing itself.
Before that change, it would, but only because all fields in a struct
aliased everything.
This CL changes the compiler to consider all references to a field as
aliasing all other fields in that struct. This is imperfect--a
reference to one field does not alias another field--but is a simple fix
for the immediate problem. A better fix would require tracking the
specific fields as well.
Fixes#15042.
Change-Id: I5c95c0dd7b0699e53022fce9bae2e8f50d6d1d04
Reviewed-on: https://go-review.googlesource.com/21390
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Compound AUTO types weren't named previously. That was because live
variable analysis (plive.go) doesn't handle spilling to compound types.
It can't handle them because there is no valid place to put VARDEFs when
regalloc is spilling compound types.
compound types = multiword builtin types: complex, string, slice, and
interface.
Instead, we split named AUTOs into individual one-word variables. For
example, a string s gets split into a byte ptr s.ptr and an integer
s.len. Those two variables can be spilled to / restored from
independently. As a result, live variable analysis can handle them
because they are one-word objects.
This CL will change how AUTOs are described in DWARF information.
Consider the code:
func f(s string, i int) int {
x := s[i:i+5]
g()
return lookup(x)
}
The old compiler would spill x to two consecutive slots on the stack,
both named x (at offsets 0 and 8). The new compiler spills the pointer
of x to a slot named x.ptr. It doesn't spill x.len at all, as it is a
constant (5) and can be rematerialized for the call to lookup.
So compound objects may not be spilled in their entirety, and even if
they are they won't necessarily be contiguous. Such is the price of
optimization.
Re-enable live variable analysis tests. One test remains disabled, it
fails because of #14904.
Change-Id: I8ef2b5ab91e43a0d2136bfc231c05d100ec0b801
Reviewed-on: https://go-review.googlesource.com/21233
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Find comparisons to constants and propagate that information
down the dominator tree. Use it to resolve other constant
comparisons on the same variable.
So if we know x >= 7, then a x > 4 condition must return true.
This change allows us to use "_ = b[7]" hints to eliminate bounds checks.
Fixes#14900
Change-Id: Idbf230bd5b7da43de3ecb48706e21cf01bf812f7
Reviewed-on: https://go-review.googlesource.com/21008
Reviewed-by: Alexandru Moșoi <alexandru@mosoi.ro>
Pushed from an old client by mistake. These are the
missing changes.
Change-Id: Ia8d61c5c0bde907369366ea9ea98711823342803
Reviewed-on: https://go-review.googlesource.com/21349
Reviewed-by: Todd Neal <todd@tneal.org>
We need to make sure all the bounds checks pass before issuing
a load which combines several others. We do this by issuing the
combined load at the last load's block, where "last" = closest to
the leaf of the dominator tree.
Fixes#15002
Change-Id: I7358116db1e039a072c12c0a73d861f3815d72af
Reviewed-on: https://go-review.googlesource.com/21246
Reviewed-by: Todd Neal <todd@tneal.org>
Previously, cmd/compile rejected constant int->string conversions if
the integer value did not fit into an "int" value. Also, runtime
incorrectly truncated 64-bit values to 32-bit before checking if
they're a valid Unicode code point. According to the Go spec, both of
these cases should instead yield "\uFFFD".
Fixes#15039.
Change-Id: I3c8a3ad9a0780c0a8dc1911386a523800fec9764
Reviewed-on: https://go-review.googlesource.com/21344
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This only tests amd64 because it's currently broken on non-SSA
backends.
Fixes#8613
Change-Id: I6bc501c81c395e533bb9c7335789750e0c6b7a8f
Reviewed-on: https://go-review.googlesource.com/21325
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
* This is an improved version of an earlier patch.
* Verified with gcc up to 100.
* Limited to two instructions based on costs from
https://gmplib.org/~tege/x86-timing.pdf
Change-Id: Ib7c37de6fd8e0ba554459b15c7409508cbcf6728
Reviewed-on: https://go-review.googlesource.com/21103
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
One intrinsic was needed to help get the very best
performance out of a future GC; as long as that one was
being added, I also added Bswap since that is sometimes
a handy thing to have. I had intended to fill out the
bit-scan intrinsic family, but the mismatch between the
"scan forward" instruction and "count leading zeroes"
was large enough to cause me to leave it out -- it poses
a dilemma that I'd rather dodge right now.
These intrinsics are not exposed for general use.
That's a separate issue requiring an API proposal change
( https://github.com/golang/proposal )
All intrinsics are tested, both that they are substituted
on the appropriate architecture, and that they produce the
expected result.
Change-Id: I5848037cfd97de4f75bdc33bdd89bba00af4a8ee
Reviewed-on: https://go-review.googlesource.com/20564
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This makes the rounding bug fix in math/big for issue 14651 available
to the compiler.
- changes to cmd/compile/internal/big fully automatic via script
- added test case for issue
- updated old test case with correct test data
Fixes#14651.
Change-Id: Iea37a2cd8d3a75f8c96193748b66156a987bbe40
Reviewed-on: https://go-review.googlesource.com/20818
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Don't write back parts of a slicing operation if they
are unchanged from the source of the slice. For example:
x.s = x.s[0:5] // don't write back pointer or cap
x.s = x.s[:5] // don't write back pointer or cap
x.s = x.s[:5:7] // don't write back pointer
There is more to be done here, for example:
x.s = x.s[:len(x.s):7] // don't write back ptr or len
This CL can't handle that one yet.
Fixes#14855
Change-Id: Id1e1a4fa7f3076dc1a76924a7f1cd791b81909bb
Reviewed-on: https://go-review.googlesource.com/20954
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
Allow inlining of functions with switch statements as long as they don't
contain a break or type switch.
Fixes#13071
Change-Id: I057be351ea4584def1a744ee87eafa5df47a7f6d
Reviewed-on: https://go-review.googlesource.com/20824
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
An instruction consisting of all 0s causes an illegal instruction
signal on s390x. Since 0s are the default in this test this CL just
makes it explicit.
Change-Id: Id6e060eed1a588f4b10a4e4861709fcd19b434ac
Reviewed-on: https://go-review.googlesource.com/20962
Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Consider functions with an ODCLCONST for inlining and modify exprfmt to
ignore those nodes when exporting. Don't add symbols to the export list
if there is no definition. This occurs when OLITERAL symbols are looked
up via Pkglookup for non-exported symbols.
Fixes#7655
Change-Id: I1de827850f4c69e58107447314fe7433e378e069
Reviewed-on: https://go-review.googlesource.com/20773
Run-TryBot: Todd Neal <todd@tneal.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The biggest change is that each test is now responsible for managing
the starting and stopping of its parallel subtests.
The "Main" test could be run as a tRunner as well. This shows that
the introduction of subtests is merely a generalization of and
consistent with the current semantics.
Change-Id: Ibf8388c08f85d4b2c0df69c069326762ed36a72e
Reviewed-on: https://go-review.googlesource.com/18893
Reviewed-by: Russ Cox <rsc@golang.org>
Make sure we don't generate write barriers in runtime
code that is marked to forbid write barriers.
Implement the optimization that if we're writing a sliced
slice back to the location it came from, we don't need a
write barrier.
Fixes#14784
Change-Id: I04b6a3b2ac303c19817e932a36a3b006de103aaa
Reviewed-on: https://go-review.googlesource.com/20791
Reviewed-by: Austin Clements <austin@google.com>
This should probably be considered "experimental" at this stage, but
what it needs is feedback from adventurous adopters. I think the data
structure used for describing escape reasons might be extendable to
allow a cleanup of the underlying algorithms, which suffers from
insufficiently separated concerns (the graph does not deal well with
escape level adjustments, so it is augmented by a second custom-walk
portion of the "flood" phase. It would be better to put it all,
including level adjustments, in a single graph structure, and then
simply flood the graph.
Tweaked to avoid allocations in the no-logging case.
Modified run.go to ignore lines with leading "#" in the output (since
it can never match a line), and in -update_errors to ignore leading
tabs in output lines and to normalize embedded filenames.
Currently requires -m -m because otherwise the noise/update
burden for the other escape tests is considerable.
There is a partial test. Existing escape analysis tests seem to
cover all except the panic case and what looks like it might be
unreachable code in escape analysis.
Fixes#10526.
Change-Id: I2524fdec54facae48b00b2548e25d9e46fcaf832
Reviewed-on: https://go-review.googlesource.com/18041
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Keep track of how many uses each Value has. Each appearance in
Value.Args and in Block.Control counts once.
The number of uses of a value is generically useful to
constrain rewrite rules. For instance, we might want to
prevent merging index operations into loads if the same
index expression is used lots of times.
But I have one use in particular for which the use count is required.
We must make sure we don't combine ops with loads if the load has
more than one use. Otherwise, we may split a single load
into multiple loads and that breaks perceived behavior in
the presence of races. In particular, the load of m.state
in sync/mutex.go:Lock can't be done twice. (I have a separate
CL which triggers the mutex failure. This CL has a test which
demonstrates a similar failure.)
Change-Id: Icaafa479239f48632a069d0c3f624e6ebc6b1f0e
Reviewed-on: https://go-review.googlesource.com/20790
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Todd Neal <todd@tneal.org>
Receiver parameters generally aren't relevant to the function
signature type. In particular:
1. When checking whether a type's method implements an interface's
method, we specifically want to ignore the receiver parameters,
because they'll be different.
2. When checking interface type equality, interface methods always
use the same "fakethis" *struct{} type as their receiver.
3. Finally, method expressions and method values degenerate into
receiver-less function types.
The only case where we care about receiver types matching is in
addmethod, which is easily handled by adding an extra Eqtype check of
the receiver parameters. Also, added a test for this, since
(surprisingly) there weren't any.
As precedence, go/types.Identical ignores receiver parameters when
comparing go/types.Signature values.
Notably, this allows us to slightly simplify the "implements"
function, which is used for checking whether type/interface t
implements interface iface. Currently, cmd/compile actually works
around Eqtype's receiver parameter checking by creating new throwaway
TFUNC Types without the receiver parameter.
(Worse, the compiler currently only provides APIs to build TFUNC Types
from Nod syntax trees, so building those throwaway types also involves
first building throwaway syntax trees.)
Passes toolstash -cmp.
Change-Id: Ib07289c66feacee284e016bc312e8c5ff674714f
Reviewed-on: https://go-review.googlesource.com/20602
Reviewed-by: Robert Griesemer <gri@golang.org>
Currently we generate write barriers when the right side of an
assignment is a global function. This doesn't fall into the existing
case of storing an address of a global because we haven't lowered the
function to a pointer yet.
This write barrier is unnecessary, so eliminate it.
Fixes#13901.
Change-Id: Ibc10e00a8803db0fd75224b66ab94c3737842a79
Reviewed-on: https://go-review.googlesource.com/20772
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Step 2 of stream-lining parameter parsing
- do parameter validity checks in parser
- two passes instead of multiple (and theoretically quadratic) passes
when checking parameters
- removes the need for OKEY and some ONONAME nodes in those passes
This removes allocation of ~123K OKEY (incl. some ONONAME) nodes
out of a total of ~10M allocated nodes when running make.bash, or
a reduction of the number of alloacted nodes by ~1.2%.
Change-Id: I4a8ec578d0ee2a7b99892ac6b92e56f8e0415f03
Reviewed-on: https://go-review.googlesource.com/20748
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Robert Griesemer <gri@golang.org>
* Refacts a bit saving and restoring parents restrictions
* Shaves ~100k from pkg/tools/linux_amd64,
but most of the savings come from the rewrite rules.
* Improves on the following artificial test case:
func f1(a4 bool, a6 bool) bool {
return a6 || (a6 || (a6 || a4)) || (a6 || (a4 || a6 || (false || a6)))
}
Change-Id: I714000f75a37a3a6617c6e6834c75bd23674215f
Reviewed-on: https://go-review.googlesource.com/20306
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Removes an intermediate layer of functions that was clogging up a
corner of the compiler's profile graph.
I can't measure a performance improvement running a large build
like jujud, but the profile reports less total time spent in
gc.(*lexer).getr.
Change-Id: I3000585cfcb0f9729d3a3859e9023690a6528591
Reviewed-on: https://go-review.googlesource.com/20565
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In addition to reflect.Value.Call, exported methods can be invoked
by the Func value in the reflect.Method struct. This CL has the
compiler track what functions get access to a legitimate reflect.Method
struct by looking for interface calls to either of:
Method(int) reflect.Method
MethodByName(string) (reflect.Method, bool)
This is a little overly conservative. If a user implements a type
with one of these methods without using the underlying calls on
reflect.Type, the linker will assume the worst and include all
exported methods. But it's cheap.
No change to any of the binary sizes reported in cl/20483.
For #14740
Change-Id: Ie17786395d0453ce0384d8b240ecb043b7726137
Reviewed-on: https://go-review.googlesource.com/20489
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The location of VARDEFs is incorrect for PPARAMOUT variables
which are also used as temporary locations. We put in VARDEFs
when setting the variable at return time, but when the location
is also used as a temporary the lifetime values are wrong.
Fix copyelim to update the names map properly. This is a
real name bug fix which, as a result, allows me to
write a reasonable test to trigger the PPARAMOUT bug.
This is kind of a band-aid fix for #14591. A more pricipled
fix (which allows values to be stored in the return variable
earlier than the return point) will be harder.
Fixes#14591
Change-Id: I7df8ae103a982d1f218ed704c080d7b83cdcfdd9
Reviewed-on: https://go-review.googlesource.com/20457
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Make sure we do any just-before-return cleanup on all paths out of a
function, including when recovering. Each exit path should include
deferreturn (if there are any defers) and then the exit
code (e.g. copying heap-escaping return values back to the stack).
Introduce a Defer SSA block type which has two outgoing edges - one the
fallthrough edge (the defer was queued successfully) and one which
immediately returns (the defer had a successful recover() call and
normal execution should resume at the return point).
Fixes#14725
Change-Id: Iad035c9fd25ef8b7a74dafbd7461cf04833d981f
Reviewed-on: https://go-review.googlesource.com/20486
Reviewed-by: David Chase <drchase@google.com>
In increment and decrement statements, explicit check that the type
of operand is numeric earlier. This avoids a related but less clear
error about converting "1" to be emitted.
So, when compiling
package main
func main() {
var x bool
x++
}
instead of emitting two errors
prog.go:5: cannot convert 1 to type bool
prog.go:5: invalid operation: x++ (non-numeric type bool)
just emits the second error.
Fixes#12525.
Change-Id: I6e81330703765bef0d6eb6c57098c1336af7c799
Reviewed-on: https://go-review.googlesource.com/20245
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The new check corresponds to the (etype != TANY || Debug['A'] != 0)
that was lost in golang.org/cl/19936.
Fixes#14652.
Change-Id: Iec3788ff02529b3b0f0d4dd92ec9f3ef20aec849
Reviewed-on: https://go-review.googlesource.com/20271
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When the linker was written in C, command line arguments were passed
around as null-terminated byte arrays which encouraged checking
characters one at a time. In Go, that can easily lead to
out-of-bounds panics.
Use the more idiomatic strings.HasPrefix when checking cmd/link's -B
argument to avoid the panic, and replace the manual hex decode with
use of the encoding/hex package.
Fixes#14636
Change-Id: I45f765bbd8cf796fee1a9a3496178bf76b117827
Reviewed-on: https://go-review.googlesource.com/20211
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The changes to internal/big are completely automatic
by running vendor.bash in that directory.
Also added respective test case.
For #14553.
Change-Id: I98b124bcc9ad9e9bd987943719be27864423cb5d
Reviewed-on: https://go-review.googlesource.com/20199
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Static branch predictions (which guide block ordering) are
adjusted based on:
loop/not-loop (favor looping)
abnormal-exit/not (avoid panic)
call/not-call (avoid call)
ret/default (treat returns as rare)
This appears to make no difference in performance of real
code, meaning the compiler itself. The earlier version of
this has been stripped down to help make the cost of this
only-aesthetic-on-Intel phase be as cheap as possible (we
probably want information about inner loops for improving
register allocation, but because register allocation follows
close behind this pass, conceivably the information could be
reused -- so we might do this anyway just to normalize
output).
For a ./make.bash that takes 200 user seconds, about .75
second is reported in likelyadjust (summing nanoseconds
reported with -d=ssa/likelyadjust/time ).
Upstream predictions are respected.
Includes test, limited to build on amd64 only.
Did several iterations on the debugging output to allow
some rough checks on behavior.
Debug=1 logging notes agree/disagree with earlier passes,
allowing analysis like the following:
Run on make.bash:
GO_GCFLAGS=-d=ssa/likelyadjust/debug \
./make.bash >& lkly5.log
grep 'ranch prediction' lkly5.log | wc -l
78242 // 78k predictions
grep 'ranch predi' lkly5.log | egrep -v 'agrees with' | wc -l
29633 // 29k NEW predictions
grep 'disagrees' lkly5.log | wc -l
444 // contradicted 444 times
grep '< exit' lkly5.log | wc -l
10212 // 10k exit predictions
grep '< exit' lkly5.log | egrep 'disagrees' | wc -l
5 // 5 contradicted by previous prediction
grep '< exit' lkly5.log | egrep -v 'agrees' | wc -l
702 // 702-5 redundant with previous prediction
grep '< call' lkly5.log | egrep -v 'agrees' | wc -l
16699 // 16k new call predictions
grep 'stay in loop' lkly5.log | egrep -v 'agrees' | wc -l
3951 // 4k new "remain in loop" predictions
Fixes#11451.
Change-Id: Iafb0504f7030d304ef4b6dc1aba9a5789151a593
Reviewed-on: https://go-review.googlesource.com/19995
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
* It does very simple bounds checking elimination. E.g.
removes the second check in for i := range a { a[i]++; a[i++]; }
* Improves on the following redundant expression:
return a6 || (a6 || (a6 || a4)) || (a6 || (a4 || a6 || (false || a6)))
* Linear in the number of block edges.
I patched in CL 12960 that does bounds, nil and constant propagation
to make sure this CL is not just redundant. Size of pkg/tool/linux_amd64/*
(excluding compile which is affected by this change):
With IsInBounds and IsSliceInBounds
-this -12960 92285080
+this -12960 91947416
-this +12960 91978976
+this +12960 91923088
Gain is ~110% of 12960.
Without IsInBounds and IsSliceInBounds (older run)
-this -12960 95515512
+this -12960 95492536
-this +12960 95216920
+this +12960 95204440
Shaves 22k on its own.
* Can we handle IsInBounds better with this? In
for i := range a { a[i]++; } the bounds checking at a[i]
is not eliminated.
Change-Id: I98957427399145fb33693173fd4d5a8d71c7cc20
Reviewed-on: https://go-review.googlesource.com/19710
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If a general comment contains multiple newline characters, we can't
simply unread one and then re-lex it via the general whitespace lexing
phase, because then we'll reset lineno to the line before the "*/"
marker, rather than keeping it where we found the "/*" marker.
Also, for processing imports, call importfile before advancing the
lexer with p.next(), so that lineno reflects the line where we found
the import path, and not the token afterwards.
Fixes#14520.
Change-Id: I785a2d83d632280113d4b757de0d57c88ba2caf4
Reviewed-on: https://go-review.googlesource.com/19934
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
non-SSA backends are all over the map as to whether nil checks
get removed or not. amd64, 386, 386/387, arm are all subtly different.
Remove these extra checks for now, they are in nilptr3_ssa.go so they
won't get lost.
Change-Id: I2e0051f488fb2cb7278c6fdd44cb9d68b5778345
Reviewed-on: https://go-review.googlesource.com/19961
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Just like we do for integer loads/stores.
Update #14511
Change-Id: Ic6ca6b54301438a5701ea5fb0be755451cb24d45
Reviewed-on: https://go-review.googlesource.com/19923
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Keith Randall <khr@golang.org>
Our stack frame sizes look pretty good now. Lower the stack
guard from 1024 to 720.
Tip is currently using 720.
We could go lower (to 640 at least) except PPC doesn't like that.
Change-Id: Ie5f96c0e822435638223f1e8a2bd1a1eed68e6aa
Reviewed-on: https://go-review.googlesource.com/19922
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Always reading runes (rather than bytes) has negligible overhead
(a simple if at the moment - it can be eliminated eventually) but
simplifies the lexer logic and opens up the door for speedups.
In the process remove many int conversions that are now not needed
anymore.
Also, because identifiers are now more easily recognized, remove
talph label and move identifier lexing "in place".
Also, instead of accepting all chars < 0x80 and then check for
"frogs", only permit valid characters in the first place. Removes
an extra call for common simple tokens and leads to simpler logic.
`time go build -a net/http` (best of 5 runs) seems 1% faster.
Assuming this is in the noise, there is no noticeable performance
degradation with this change.
Change-Id: I3454c9bf8b91808188cf7a5f559341749da9a1eb
Reviewed-on: https://go-review.googlesource.com/19847
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Merge push_parser and pop_parser into a single parse_import function
and inline unimportfile. Shake out function boundaries a little bit so
that the symmetry is readily visible.
Move the import_package call into parse_import (and inline
import_there into import_package). This means importfile no longer
needs to provide fake import data to be needlessly lexed/parsed every
time it's called.
Also, instead of indicating import success/failure by whether the next
token is "package", import_spec can just check whether importpkg is
non-nil.
Tangentially, this somehow alters the diagnostics produced for
test/fixedbugs/issue11610.go. However, the new diagnostics are more
consistent with those produced when the empty import statement is
absent, which seems more desirable than maintaining the previous
errors.
Change-Id: I5cd1c22aa14da8a743ef569ff084711d137279d5
Reviewed-on: https://go-review.googlesource.com/19650
Reviewed-by: Robert Griesemer <gri@golang.org>
Walking the field name as if it were an expression
caused a called to haspointers with a TFIELD, which panics.
Trigger was a field at a large offset within a large struct,
combined with a struct literal expression mentioning that
field.
Fixes#14405
Change-Id: I4589badae27cf3d7cf365f3a66c13447512f41f9
Reviewed-on: https://go-review.googlesource.com/19699
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The Go 1.6 release notes say we'll remove the “-X name value” form
(in favor of the “-X name=value” form) in Go 1.7.
Do that.
Also establish the doc/go1.7.txt file.
Change-Id: Ie4565a6bc5dbcf155181754d8d92bfbb23c75338
Reviewed-on: https://go-review.googlesource.com/19614
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This bug was introduced in golang.org/cl/18217,
while trying to fix#13777.
Originally I wanted to just disable inlining for the case
being handled incorrectly, but it's fairly difficult to detect
and much easier just to fix. Since the case being handled
incorrectly was inlined correctly in Go 1.5, not inlining it
would also be somewhat of a regression.
So just fix it.
Test case copied from Ian's CL 19520.
The mistake to worry about in this CL would be relaxing
the condition too much (we now print the note more often
than we did yesterday). To confirm that we'd catch this mistake,
I checked that changing (!fmtbody || !t.Funarg) to (true) does
cause fixedbugs/issue13777.go to fail. And putting it back
to what is written in this CL makes that test pass again
as well as the new fixedbugs/issue14331.go.
So I believe that the new condition is correct for both constraints.
Fixes#14331.
Change-Id: I91f75a4d5d07c53af5caea1855c780d9874b8df6
Reviewed-on: https://go-review.googlesource.com/19514
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Type switches need write barriers if the written-to
variable is heap allocated.
For the added needwritebarrier call, the right arg doesn't
really matter, I just pass something that will never disqualify
the write barrier. The left arg is the one that matters.
Fixes#14306
Change-Id: Ic2754167cce062064ea2eeac2944ea4f77cc9c3b
Reviewed-on: https://go-review.googlesource.com/19481
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Semi-regular merge from tip to dev.ssa.
Two fixes:
1) Mark selectgo as not returning. This caused problems
because there are no VARKILL ops on the selectgo path,
causing things to be marked live that shouldn't be.
2) Tell the amd64 assembler that addressing modes like
name(SP)(AX*4) are ok.
Change-Id: I9ca81c76391b1a65cc47edc8610c70ff1a621913
It is one of the slowest compiler phases right now, and we
run two of them.
Instead of using a map to make the initial partition, use a sort.
It is much less memory intensive.
Do a few optimizations to avoid work for size-1 equivalence classes.
Implement -N.
Change-Id: I1d2d85d3771abc918db4dd7cc30b0b2d854b15e1
Reviewed-on: https://go-review.googlesource.com/19024
Reviewed-by: David Chase <drchase@google.com>
Empty blocks are introduced to remove critical edges.
After regalloc, we can remove any of the added blocks
that are still empty.
Change-Id: I0b40e95ac3a6cc1e632a479443479532b6c5ccd9
Reviewed-on: https://go-review.googlesource.com/18833
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Consider this code:
func f(*int)
func g() {
p := new(int)
f(p)
}
where f is an assembly function.
In general liveness analysis assumes that during the call to f, p is dead
in this frame. If f has retained p, p will be found alive in f's frame and keep
the new(int) from being garbage collected. This is all correct and works.
We use the Go func declaration for f to give the assembly function
liveness information (the arguments are assumed live for the entire call).
Now consider this code:
func h1() {
p := new(int)
syscall.Syscall(1, 2, 3, uintptr(unsafe.Pointer(p)))
}
Here syscall.Syscall is taking the place of f, but because its arguments
are uintptr, the liveness analysis and the garbage collector ignore them.
Since p is no longer live in h once the call starts, if the garbage collector
scans the stack while the system call is blocked, it will find no reference
to the new(int) and reclaim it. If the kernel is going to write to *p once
the call finishes, reclaiming the memory is a mistake.
We can't change the arguments or the liveness information for
syscall.Syscall itself, both for compatibility and because sometimes the
arguments really are integers, and the garbage collector will get quite upset
if it finds an integer where it expects a pointer. The problem is that
these arguments are fundamentally untyped.
The solution we have taken in the syscall package's wrappers in past
releases is to insert a call to a dummy function named "use", to make
it look like the argument is live during the call to syscall.Syscall:
func h2() {
p := new(int)
syscall.Syscall(1, 2, 3, uintptr(unsafe.Pointer(p)))
use(unsafe.Pointer(p))
}
Keeping p alive during the call means that if the garbage collector
scans the stack during the system call now, it will find the reference to p.
Unfortunately, this approach is not available to users outside syscall,
because 'use' is unexported, and people also have to realize they need
to use it and do so. There is much existing code using syscall.Syscall
without a 'use'-like function. That code will fail very occasionally in
mysterious ways (see #13372).
This CL fixes all that existing code by making the compiler do the right
thing automatically, without any code modifications. That is, it takes h1
above, which is incorrect code today, and makes it correct code.
Specifically, if the compiler sees a foreign func definition (one
without a body) that has uintptr arguments, it marks those arguments
as "unsafe uintptrs". If it later sees the function being called
with uintptr(unsafe.Pointer(x)) as an argument, it arranges to mark x
as having escaped, and it makes sure to hold x in a live temporary
variable until the call returns, so that the garbage collector cannot
reclaim whatever heap memory x points to.
For now I am leaving the explicit calls to use in package syscall,
but they can be removed early in a future cycle (likely Go 1.7).
The rule has no effect on escape analysis, only on liveness analysis.
Fixes#13372.
Change-Id: I2addb83f70d08db08c64d394f9d06ff0a063c500
Reviewed-on: https://go-review.googlesource.com/18584
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Brief background on "why heap allocate". Things can be
forced to the heap for the following reasons:
1) address published, hence lifetime unknown.
2) size unknown/too large, cannot be stack allocated
3) multiplicity unknown/too large, cannot be stack allocated
4) reachable from heap (not necessarily published)
The bug here is a case of failing to enforce 4) when an
object Y was reachable from a heap allocation X forced
because of 3). It was found in the case of a closure
allocated within a loop (X) and assigned to a variable
outside the loop (multiplicity unknown) where the closure
also captured a map (Y) declared outside the loop (reachable
from heap). Note the variable declared outside the loop (Y)
is not published, has known size, and known multiplicity
(one). The only reason for heap allocation is that it was
reached from a heap allocated item (X), but because that was
not forced by publication, it has to be tracked by loop
level, but escape-loop level was not tracked and thus a bug
results.
The fix is that when a heap allocation is newly discovered,
use its looplevel as the minimum loop level for downstream
escape flooding.
Every attempt to generalize this bug to X-in-loop-
references-Y-outside loop succeeded, so the fix was aimed
to be general. Anywhere that loop level forces heap
allocation, the loop level is tracked. This is not yet
tested for all possible X and Y, but it is correctness-
conservative and because it caused only one trivial
regression in the escape tests, it is probably also
performance-conservative.
The new test checks the following:
1) in the map case, that if fn escapes, so does the map.
2) in the map case, if fn does not escape, neither does the map.
3) in the &x case, that if fn escapes, so does &x.
4) in the &x case, if fn does not escape, neither does &x.
Fixes#13799.
Change-Id: Ie280bef2bb86ec869c7c206789d0b68f080c3fdb
Reviewed-on: https://go-review.googlesource.com/18234
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Adding the evconst(n) call for OANDAND and OOROR in
golang.org/cl/18262 was originally just to parallel the above iscmp
branch, but upon further inspection it seemed odd that removing it
caused test/fixedbugs/issue6671.go's
var b mybool
// ...
b = bool(true) && true // ERROR "cannot use"
to start failing (i.e., by not emitting the expected "cannot use"
error).
The problem is that evconst(n)'s settrue and setfalse paths always
reset n.Type to idealbool, even for logical operators where n.Type
should preserve the operand type. Adding the evconst(n) call for
OANDAND/OOROR inadvertantly worked around this by turning the later
evconst(n) call at line 2167 into a noop, so the "n.Type = t"
assignment at line 739 would preserve the operand type.
However, that means evconst(n) was still clobbering n.Type for ONOT,
so declarations like:
const _ bool = !mybool(true)
were erroneously accepted.
Update #13821.
Change-Id: I18e37287f05398fdaeecc0f0d23984e244f025da
Reviewed-on: https://go-review.googlesource.com/18362
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
We don't use these for benchmarking anymore.
Now we have the go1 dir and the benchmarks subrepo.
Some have problematic copyright notices, so move out of main repo.
Preserved in golang.org/x/exp/shootout.
Fixes#12688.
Fixes#13584.
Change-Id: Ic0b71191ca1a286d33d7813aca94bab1617a1c82
Reviewed-on: https://go-review.googlesource.com/18320
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Added a format option to inhibit output of .Note field in
printing, and enabled that option during export.
Added test.
Fixes#13777.
Change-Id: I739f9785eb040f2fecbeb96d5a9ceb8c1ca0f772
Reviewed-on: https://go-review.googlesource.com/18217
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: David Chase <drchase@google.com>
The test for non-package main top-level inputs is done while parsing
the export data. Issue #13468 happened because we were not parsing
the export data when using compiler-generated archives
(that is, when using go tool compile -pack).
Fix this by parsing the export data even for archives.
However, that turns up a different problem: the export data check
reports (one assumes spurious) skew errors now, because it has
not been run since Go 1.2.
(Go 1.3 was the first release to use go tool compile -pack.)
Since the code hasn't run since Go 1.2, it can't be that important.
Since it doesn't work today, just delete it.
Figuring out how to make this code work with Robert's export
format was one of the largest remaining TODOs for that format.
Now we don't have to.
Fixes#13468 and makes the world a better place.
Change-Id: I40a4b284cf140d49d48b714bd80762d6889acdb9
Reviewed-on: https://go-review.googlesource.com/17976
Reviewed-by: Robert Griesemer <gri@golang.org>
Fixes#12411.
Change-Id: I2202a754c7750e3b2119e3744362c98ca0d2433e
Reviewed-on: https://go-review.googlesource.com/17818
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Another (historic) artifact due to partially resolving symbols too early.
Fixes#13539.
Change-Id: Ie720c491cfa399599454f384b3a9735e75d4e8f1
Reviewed-on: https://go-review.googlesource.com/17600
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Damien Neil <dneil@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Following an empty import, a declaration involving a ? symbol
generates an internal compiler error when the name of the
symbol (in newname function).
package a
import""
var?
go.go:2: import path is empty
go.go:3: internal compiler error: newname nil
Make sure dclname is not called when the symbol is nil.
The error message is now:
go.go:2: import path is empty
go.go:3: invalid declaration
go.go:4: syntax error: unexpected EOF
This CL was initially meant to be applied to the old parser,
and has been updated to apply to the new parser.
Fixes#11610
Change-Id: I75e07622fb3af1d104e3a38c89d9e128e3b94522
Reviewed-on: https://go-review.googlesource.com/15268
Reviewed-by: Russ Cox <rsc@golang.org>
The following code:
func n() {(interface{int})}
generates:
3: interface contains embedded non-interface int
3: type %!v(PANIC=runtime error: invalid memory address or nil pointer dereference) is not an expression
It is because the corresponding symbol (Sym field in Type object)
is nil, resulting in a panic in typefmt.
Just skip the symbol if it is nil, so that the error message becomes:
3: interface contains embedded non-interface int
3: type interface { int } is not an expression
Fixes#11614
Change-Id: I219ae7eb01edca264fad1d4a1bd261d026294b00
Reviewed-on: https://go-review.googlesource.com/14015
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
The build tags are necessary to keep "go build" in that directory
building only stdio.go, but we have to arrange for test/run.go to
treat them as satisfied.
Fixes#12625.
Change-Id: Iec0cb2fdc2c9b24a4e0530be25e940aa0cc9552e
Reviewed-on: https://go-review.googlesource.com/17454
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Move test for isblank into addmethod so that most of the type checking
for methods is also performed for blank methods.
Fixes#11366.
Change-Id: I13d554723bf96d906d0b3ff390d7b7c87c1a5020
Reviewed-on: https://go-review.googlesource.com/16866
Reviewed-by: Robert Griesemer <gri@golang.org>
- use same local variable name (lno) for line number for LCOLAS everywhere
- remove now unneeded assignment of line number to yylval.i in lexer
Fix per suggestion of mdempsky.
Fixes#13415.
Change-Id: Ie3c7f5681615042a12b81b26724b3a5d8a979c25
Reviewed-on: https://go-review.googlesource.com/17248
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This is a bit ugly but it's a useful test. Run go install -buildmode=shared std
and then go run run.go -linkshared (it passes on linux/amd64).
Change-Id: I5684c79cd03817fa1fc399788b7320f8535c08da
Reviewed-on: https://go-review.googlesource.com/16343
Reviewed-by: Russ Cox <rsc@golang.org>
- fix/check location of popdcl calls where questioned
- remove unnecessary handling of ... (LDDD) in ntype (couldn't be reached)
- inlined and fnret_type and simplified fnres as a consequence
- leave handling of ... (LDDD) in arg_list alone (remove TODO)
- verify that parser requires a ';' after last statement in a case/default
(added test case)
Fixes#13243.
Change-Id: Iad94b498591a5e85f4cb15bbc01e8e101415560d
Reviewed-on: https://go-review.googlesource.com/17155
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Chris Manghane <cmang@golang.org>
Use a combination of follow- and stop-token lists and nesting levels
to better synchronize parser after a syntax error.
Fixes#13319.
Change-Id: I9592e0b5b3ba782fb9f9315fea16163328e204f7
Reviewed-on: https://go-review.googlesource.com/17080
Reviewed-by: Chris Manghane <cmang@golang.org>
Handling of &(T{}) assumed that the parser would not introduce ()'s.
Also: Better comments around handling of OPAREN syntax tree optimization.
Fixes#13261.
Change-Id: Ifc5047a0448f5e7d74cd42f6608b87dcc9c2f2fb
Reviewed-on: https://go-review.googlesource.com/17040
Reviewed-by: Chris Manghane <cmang@golang.org>
Also:
- better error messages in some cases
- factored out function to produce syntax error at given line number
Fixes#13273.
Change-Id: I0192a94731cc23444680a26bd0656ef663e6da0b
Reviewed-on: https://go-review.googlesource.com/16992
Reviewed-by: Chris Manghane <cmang@golang.org>
This is a translation of the yacc-based parser with adjustements
to make the grammar work for a recursive-descent parser followed
by cleanups and simplifications.
The yacc actions were mostly literally copied for correctness
with better temporary names.
A few of the syntax tests were adjusted for slightly different
error messages (it is very difficult to match the yacc-based
error messages in all cases, and sometimes the new parser could
produce better errors).
The new parser is enabled by default.
To switch back to the yacc-based parser, set -oldparser.
To hardwire the switch back, uncomment "oldparser = 1" in lex.go.
- passes all.bash
- ~18% reduced parse time per file on average for make.bash
- ~3% reduced compile time for building cmd/compile
Change-Id: Icb5651bb9d8b9f66261762d2c94a03793050d4ce
Reviewed-on: https://go-review.googlesource.com/16665
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Larger stack frames mean nosplit functions use more stack and so the limit
needs to increase.
The change to test/nosplit.go is a bit ugly but I can't really think of a
way to make it nicer.
Change-Id: I2616b58015f0b62abbd62951575fcd0d2d8643c2
Reviewed-on: https://go-review.googlesource.com/16504
Reviewed-by: Russ Cox <rsc@golang.org>
The heap profile is only guaranteed to be up-to-date after two GC
cycles, so force two GCs instead of just one.
Updates #13098.
Change-Id: I4fb9287b698f4a3b90b8af9fc6a2efb3b082bfe5
Reviewed-on: https://go-review.googlesource.com/16848
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
The heapsampling.go test occasionally fails on some architectures
because it finds zero heap samples in main.alloc. This happens because
the byte and object counts are only updated at a GC. Hence, if a GC
happens part way through allocInterleaved, but then doesn't happen
after we start calling main.alloc, checkAllocations will see buckets
for the lines in main.alloc (which are created eagerly), but the
object and byte counts will be zero.
Fix this by forcing a GC to update the profile before we collect it.
Fixes#13098.
Change-Id: Ia7a9918eea6399307f10499dd7abefd4f6d13cf6
Reviewed-on: https://go-review.googlesource.com/16846
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Skip fixedbugs/issue10607.go because external linking is not supported
yet.
Skip nilptr3.go because of issue #9058 (same as ppc64).
Change-Id: Ib3dfbd9a03ee4052871cf57c74b3cc5e745e1f80
Reviewed-on: https://go-review.googlesource.com/14461
Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change is the same as CL #9345 which was reverted,
except for a small bug fix.
The only change is to the body of sendDirect and its callsite.
Also added a test.
The problem was during a channel send operation. The target
of the send was a sleeping goroutine waiting to receive. We
basically do:
1) Read the destination pointer out of the sudog structure
2) Copy the value we're sending to that destination pointer
Unfortunately, the previous change had a goroutine suspend
point between 1 & 2 (the call to sendDirect). At that point
the destination goroutine's stack could be copied (shrunk).
The pointer we read in step 1 is no longer valid for step 2.
Fixed by not allowing any suspension points between 1 & 2.
I suspect the old code worked correctly basically by accident.
Fixes#13169
The original 9345:
This change removes the retry mechanism we use for buffered channels.
Instead, any sender waking up a receiver or vice versa completes the
full protocol with its counterpart. This means the counterpart does
not need to relock the channel when it wakes up. (Currently
buffered channels need to relock on wakeup.)
For sends on a channel with waiting receivers, this change replaces
two copies (sender->queue, queue->receiver) with one (sender->receiver).
For receives on channels with a waiting sender, two copies are still required.
This change unifies to a large degree the algorithm for buffered
and unbuffered channels, simplifying the overall implementation.
Fixes#11506
Change-Id: I57dfa3fc219cffa4d48301ee15fe5479299efa09
Reviewed-on: https://go-review.googlesource.com/16740
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Make sure that we're moving or zeroing pointers atomically.
Anything that is a multiple of pointer size and at least
pointer aligned might have pointers in it. All the code looks
ok except for the 1-pointer-sized moves.
Fixes#13160
Update #12552
Change-Id: Ib97d9b918fa9f4cc5c56c67ed90255b7fdfb7b45
Reviewed-on: https://go-review.googlesource.com/16668
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Duffcopy now uses X0, as of 5cf281a. Teach the peephole
optimizer that duffcopy clobbers X0 so that it does not
rename registers use X0 across the duffcopy instruction.
Fixes#13171
Change-Id: I389cbf1982cb6eb2f51e6152ac96736a8589f085
Reviewed-on: https://go-review.googlesource.com/16715
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
sradi and sradi. hide the top bit of their immediate argument apart from the
rest of it, but the code only handled the sradi case.
I'm pretty sure this is the only instruction missing (a couple of the rotate
instructions encode their immediate the same way but their handling looks OK).
This fixes the failure of "GOARCH=amd64 ~/go/bin/go install -v runtime" as
reported in the bug.
Fixes#11987
Change-Id: I0cdefcd7a04e0e8fce45827e7054ffde9a83f589
Reviewed-on: https://go-review.googlesource.com/16710
Reviewed-by: Minux Ma <minux@golang.org>
Handling of special records for tiny allocations has two problems:
1. Once we queue a finalizer we mark the object. As the result any
subsequent finalizers for the same object will not be queued
during this GC cycle. If we have 16 finalizers setup (the worst case),
finalization will take 16 GC cycles. This is what caused misbehave
of tinyfin.go. The actual flakiness was caused by the fact that fing
is asynchronous and don't always run before the check.
2. If a tiny block has both finalizer and profile specials,
it is possible that we both queue finalizer, preserve the object live
and free the profile record. As the result heap profile can be skewed.
Fix both issues by analyzing all special records for a single object at once.
Also, make tinyfin test stricter and remove reliance on real time.
Also, add a test for the problem 2. Currently heap profile missed about
a half of live memory.
Fixes#13100
Change-Id: I9ae4dc1c44893724138a4565ca5cae29f2e97544
Reviewed-on: https://go-review.googlesource.com/16591
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
* use new(int32) to be pedantic about documented SetFinalizer rules:
"The argument x must be a pointer to an object allocated by calling
new or by taking the address of a composite literal"
* remove the amd64-only restriction. The GC is fully precise everywhere
now, even on 32-bit. (keep the gccgo restriction, though)
* remove a data race (perhaps the actual bug) and use atomic.LoadInt32
for the final check. The race detector is now happy, too.
Updates #13100
Change-Id: I8d05c0ac4f046af9ba05701ad709c57984b34893
Reviewed-on: https://go-review.googlesource.com/16535
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Some tests disabled, some bifurcated into _ssa and not,
with appropriate logging added to compiler.
"tests/live.go" in particular needs attention.
SSA-specific testing removed, since it's all SSA now.
Added "-run_skips" option to tests/run.go to simplify
checking whether a test still fails (or how it fails)
on a skipped platform.
The compiler now compiles with SSA by default.
If you don't want SSA, specify GOSSAHASH=n (or N) as
an environment variable. Function names ending in "_ssa"
are always SSA-compiled.
GOSSAFUNC=fname retains its "SSA for fname, log to ssa.html"
GOSSAPKG=pkg only has an effect when GOSSAHASH=n
GOSSAHASH=10101 etc retains its name-hash-matching behavior
for purposes of debugging.
See #13068
Change-Id: I8217bfeb34173533eaeb391b5f6935483c7d6b43
Reviewed-on: https://go-review.googlesource.com/16299
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David Chase <drchase@google.com>
Some tests need to disable inlining of a function. It's currently done
in one of a few ways (adding a function call, an empty switch, or a
defer). Add support for a less fragile 'go:noinline' directive that
prevents inlining.
Fixes#12312
Change-Id: Ife444e13361b4a927709d81aa41e448f32eec8d4
Reviewed-on: https://go-review.googlesource.com/13911
Run-TryBot: Todd Neal <todd@tneal.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Modified GOSSA{HASH.PKG} environment variable filters to
make it easier to make/run with all SSA for testing.
Disable attempts at SSA for architectures that are not
amd64 (avoid spurious errors/unimplementeds.)
Removed easy out for unimplemented features.
Add convert op for proper liveness in presence of uintptr
to/from unsafe.Pointer conversions.
Tweaked stack sizes to get a pass on windows;
1024 instead 768, was observed to pass at least once.
Change-Id: Ida3800afcda67d529e3b1cf48ca4a3f0fa48b2c5
Reviewed-on: https://go-review.googlesource.com/16201
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David Chase <drchase@google.com>
Small fix: looks like a short variable declaration with a type switch
checks to make sure the variable used had valid shape (ONAME, OTYPE, or
ONONAME) and rejects everything else. Then a new variable is declared.
If the symbol contained in the declaration was a named OLITERAL (still a
valid identifier obviously) it would be rejected, even though a new
variable would have been declared.
Fix adds this case to the check.
Added a test case from issue12413.
Fixes#12413
Change-Id: I150dadafa8ee5612c867d58031027f2dca8c6ebc
Reviewed-on: https://go-review.googlesource.com/15760
Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Apply static bounds checking logic during type checking even to
zero-element arrays, but skip synthesized OINDEX nodes that the
compiler has asserted are within bounds (such as the ones generated
while desugaring ORANGE nodes). This matches the logic in walkexpr
that also skips static bounds checking when Bounded is true.
Passes toolstash/buildall.
Fixes#12944.
Change-Id: I14ba03d71c002bf969d69783bec8d1a8e10e7d75
Reviewed-on: https://go-review.googlesource.com/15902
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Following the C to Go translation, some useless variables
were left in the code. In fmt.go, this was harmless.
In lex.go, it broke the error message related to
non-canonical import paths.
Fix it, and remove the useless variables.
The added test case is ignored in the go/types tests, since
the behavior of the non-canonical import path check seems
to be different.
Fixes#11362
Change-Id: Ic9129139ede90357dc79ebf167af638cf44536fa
Reviewed-on: https://go-review.googlesource.com/15580
Reviewed-by: Marvin Stenger <marvin.stenger94@gmail.com>
Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This lets us re-enable duffzero.
Fixes#12108
Change-Id: Iefd24d26eaa56067caa2c29ff99cd20a42d8714a
Reviewed-on: https://go-review.googlesource.com/14937
Reviewed-by: Keith Randall <khr@golang.org>
The current heap sampling introduces some bias that interferes
with unsampling, producing unexpected heap profiles.
The solution is to use a Poisson process to generate the
sampling points, using the formulas described at
https://en.wikipedia.org/wiki/Poisson_process
This fixes#12620
Change-Id: If2400809ed3c41de504dd6cff06be14e476ff96c
Reviewed-on: https://go-review.googlesource.com/14590
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Turns out the summary information for the ... args was
already correctly computed, all that lacked was to make
use of it and correct tests that documented our prior
deficiencies.
Fixes#12006
Change-Id: Ie8adfab7547f179391d470679598f0904aabf9f7
Reviewed-on: https://go-review.googlesource.com/15200
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Internal error arose from calling methodfunc on a invalid interface
field during the implements check. int obviously isn't a function,
and errors on getinarg...
for im := iface.Type; im != nil; im = im.Down {
imtype = methodfunc(im.Type, nil)
// ...
}
Fix handles the internal compiler error, but does not throw an
additional error, i.e. the following code will error on the I
interface, but type A will pass the implements check since
'Read(string) string' is implemented and 'int' is skipped
type I interface {
Read(string) string
int
}
type A struct {
}
func (a *A) Read(s string) string {
return s
}
func New() I {
return new(A)
}
Fixes#10975
Change-Id: I4b54013afb2814db3f315515f0c742d8631ca500
Reviewed-on: https://go-review.googlesource.com/13747
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The existing test did not take into account the implicit
dereference of &fixedArray and thus heap-escaped when it
was not necessary.
Also added a detailed test for this and related cases.
Fixes#12588
Change-Id: I951e9684a093082ccdca47710f69f4366bd6b3cf
Reviewed-on: https://go-review.googlesource.com/15130
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
As detailed in #11910, the current implementation attempts to execute an area
of memory with unknown content. If the memory is executable, the result is
unpredictable - instead, make the test deterministic by attempting to execute
an instruction that is known to trigger a trap on the given architecture.
The new implementation is written by iant@ and provided via #11910.
Update issue #11910
Change-Id: Ia698c36e0dd98a9d9d16a701f60f6748c6faf896
Reviewed-on: https://go-review.googlesource.com/15058
Run-TryBot: Joel Sing <jsing@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For variables which get SSA'd, SSA keeps track of all the def/kill.
It is only for on-stack variables that we need them.
This reduces stack frame sizes significantly because often the
only use of a variable was a varkill, and without that last use
the variable doesn't get allocated in the frame at all.
Fixes#12602
Change-Id: I3f00a768aa5ddd8d7772f375b25f846086a3e689
Reviewed-on: https://go-review.googlesource.com/14758
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
recover4 allocates 16 pages of memory via mmap, makes a 4 page hole in it with
munmap, allocates another 16 pages of memory via normal allocation and then
tries to copy from one to the other. For some reason on arm64 (but no other
platform I have tested) the second allocation sometimes causes the runtime to
ask the kernel for 4 additional pages of memory -- which the kernel satisfies
by remapping the pages that were just unmapped!
Moving the second allocation before the munmap fixes this behaviour, I can run
recover4 tens of thousands of times without failure with this fix vs a failure
rate of ~0.5% before.
Fixes#12549
Change-Id: I490b895b606897e4f7f25b1b51f5d485a366fffb
Reviewed-on: https://go-review.googlesource.com/14632
Reviewed-by: Dave Cheney <dave@cheney.net>
For now, we only use typedmemmove. This can be optimized
in future CLs.
Also add a feature to help with binary searching bad compilations.
Together with GOSSAPKG, GOSSAHASH specifies the last few binary digits
of the hash of function names that should be compiled. So
GOSSAHASH=0110 means compile only those functions whose last 4 bits
of hash are 0110. By adding digits to the front we can binary search
for the function whose SSA-generated code is causing a test to fail.
Change-Id: I5a8b6b70c6f034f59e5753965234cd42ea36d524
Reviewed-on: https://go-review.googlesource.com/14530
Reviewed-by: Keith Randall <khr@golang.org>
Add line that was inadvertently removed.
Change-Id: I99ebc1041e984e408ae5825836c28b9891d6043b
Reviewed-on: https://go-review.googlesource.com/14470
Run-TryBot: Todd Neal <todd@tneal.org>
Reviewed-by: Keith Randall <khr@golang.org>
This matches existing behavior, see issue #2196
Change-Id: Ifa9359b7c821115389f337a57de355c5ec23be8f
Reviewed-on: https://go-review.googlesource.com/14261
Reviewed-by: Keith Randall <khr@golang.org>
Evaluating args can overwrite arg area, so we can't write argsize and func
until args are evaluated.
Fixes test/recover.go, test/recover1.go, and test/fixedbugs/issue4066.go
Change-Id: I862e4934ccdb8661431bcc3e1e93817ea834ea3f
Reviewed-on: https://go-review.googlesource.com/14405
Reviewed-by: David Chase <drchase@google.com>
Now that the standard library tests
are all passing, add the
test directory tests.
These contain a number of edge case tests
that are of particular interest for compilers.
Some kinds of tests are not well-suited
for a new backend, such as errorcheck tests.
To start, use SSA only for run and runoutput.
There are three failing tests now.
Just mark them as such for now,
so that we can prevent regressions.
This code will all be unwound once SSA
codegen matures and becomes the default.
Change-Id: Ic51e6d0cc1cd48ef1e2fe2c9a743bf0cce275200
Reviewed-on: https://go-review.googlesource.com/14344
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This one of a set of changes to make the transition away from NodeList
easier by removing cases in which NodeList doesn't act semi-trivially like a
[]*Node.
This CL was originally prepared by Josh Bleecher Snyder <josharian@gmail.com>.
This change passes go build -toolexec 'toolstash -cmp' -a std.
Change-Id: I4d041b343952f4a31f3150fd70669e08fcaa74f8
Reviewed-on: https://go-review.googlesource.com/14305
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This is a first of a set of changes to make the transition away from NodeList
easier by removing cases in which NodeList doesn't act semi-trivially like a
[]*Node.
This CL was originally prepared by Josh Bleecher Snyder <josharian@gmail.com>.
This change passes go build -toolexec 'toolstash -cmp' -a std.
Change-Id: Iad10b75e42b5b24e1694407841282fa3bab2dc9f
Reviewed-on: https://go-review.googlesource.com/14232
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Instead of trying to delete dead code as soon as we find it, just
mark it as dead using a PlainAndDead block kind. The deadcode pass
will do the real removal.
This way is somewhat more efficient because we don't need to mess
with successor and predecessor lists of all the dead blocks.
Fixes#12347
Change-Id: Ia42d6b5f9cdb3215a51737b3eb117c00bd439b13
Reviewed-on: https://go-review.googlesource.com/14033
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
The issue 12226 has been caused by the allocation of the same register
for the equality check of two byte values. The code in cgen.go freed the
register for the second operand before the allocation of the register
for the first operand.
Fixes#12226
Change-Id: Ie4dc33a488bd48a17f8ae9b497fd63c1ae390555
Reviewed-on: https://go-review.googlesource.com/13771
Reviewed-by: Russ Cox <rsc@golang.org>
Currently an expression like
var v = 0 >> 1000
is rejected by gc with a "stupid shift" error, while gotype
compiles it successfully.
As suggested by gri on the issue tracker, allow an rsh right
operand to be any valid uint value.
Fixes#11328
Change-Id: I6ccb3b7f842338d91fd26ae37dd4fa279d7fc440
Reviewed-on: https://go-review.googlesource.com/13777
Reviewed-by: Robert Griesemer <gri@golang.org>
The reg[] array in .../gc is where truth lies. The copy in .../ARCH
is incorrect as it is mostly not updated to reflect regalloc decisions.
This bug was introduced in the rewrite
https://go-review.googlesource.com/#/c/7853/. The new reg[] array was
introduced in .../gc but not all of the uses were removed in the
.../ARCH directories.
Fixes#12133
Change-Id: I6364fc403cdab92d802d17f2913ba1607734037c
Reviewed-on: https://go-review.googlesource.com/13630
Reviewed-by: Russ Cox <rsc@golang.org>
ODOTTYPE should be treated a whole lot like ODOT,
but it was missing completely from the switch in
escwalk and thus escape status did not propagate
to fields.
Since interfaces are required to trigger this bug,
the test was added to escape_iface.go.
Fixes#11931.
Change-Id: Id0383981cc4b1a160f6ad447192a112eed084538
Reviewed-on: https://go-review.googlesource.com/12921
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
Instead of pushing the denominator argument on the stack,
the denominator is now passed in m.
This fixes a variety of bugs related to trying to take stack traces
backwards from the middle of the software div/mod routines.
Some of those bugs have been kludged around in the past,
but others have not. Instead of trying to patch up after breaking
the stack, this CL stops breaking the stack.
This is an update of https://golang.org/cl/19810043,
which was rolled back in https://golang.org/cl/20350043.
The problem in the original CL was that there were divisions
at bad times, when m was not available. These were divisions
by constant denominators, either in C code or in assembly.
The Go compiler knows how to generate division by multiplication
for constant denominators, but the C compiler did not.
There is no longer any C code, so that's taken care of.
There was one problematic DIV in runtime.usleep (assembly)
but https://golang.org/cl/12898 took care of that one.
So now this approach is safe.
Reject DIV/MOD in NOSPLIT functions to keep them from
coming back.
Fixes#6681.
Fixes#6699.
Fixes#10486.
Change-Id: I09a13c76ad08ba75b3bd5d46a3eb78e66a84ab38
Reviewed-on: https://go-review.googlesource.com/12899
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The layout code has to date insisted on stack frames that are 16-aligned
including the saved LR, and it ensured this by growing the frame itself.
This breaks code that refers to values near the top of the frame by positive
offset from SP, and in general it's too magical: if you see TEXT xxx, $N,
you expect that the frame size is actually N, not sometimes N and sometimes N+8.
This led to a serious bug in the compiler where ambiguously live values
were not being zeroed correctly, which in turn triggered an assertion
in the GC about finding only valid pointers. The compiler has been
fixed to always emit aligned frames, and the hand-written assembly
has also been fixed.
Now that everything is aligned, make unaligned an error instead of
something to "fix" silently.
For #9880.
Change-Id: I05f01a9df174d64b37fa19b36a6b6c5f18d5ba2d
Reviewed-on: https://go-review.googlesource.com/12848
Reviewed-by: Austin Clements <austin@google.com>
Russ Cox fixed this issue for other systems
in CL 12026, but the Plan 9 part was forgotten.
Fixes#11656.
Change-Id: I91c033687987ba43d13ad8f42e3fe4c7a78e6075
Reviewed-on: https://go-review.googlesource.com/12762
Reviewed-by: Russ Cox <rsc@golang.org>
This is a reprise of https://golang.org/cl/12623. In that a CL I made
a suggestion which forgot that the +build constraints in the test
directory are not the same as those supported by the go tool: in the
test directory, if a single +build line fails, the test is skipped.
(In my defense, the code I was commenting on was also wrong.)
Change-Id: I8f29392a80b1983027f9a33043c803578409d678
Reviewed-on: https://go-review.googlesource.com/12776
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Old code appended, did not play well with a closure
with a ... param.
Fixes#11075.
Change-Id: Ib7c8590c5c4e576e798837e7499e00f3494efb4a
Reviewed-on: https://go-review.googlesource.com/12580
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: David Chase <drchase@google.com>
Add label and goto checks and improve test coverage.
Implement OSWITCH and OSELECT.
Implement OBREAK and OCONTINUE.
Allow generation of code in dead blocks.
Change-Id: Ibebb7c98b4b2344f46d38db7c9dce058c56beaac
Reviewed-on: https://go-review.googlesource.com/12445
Reviewed-by: Keith Randall <khr@golang.org>
There was already special code to recognize "?" in hidden_structdcl,
which is used for inlined types and variables. This recognizes "?" in
structdcl as well, a case that arises when a struct type appears
within an inlined function body.
Fixes#10219.
Change-Id: Ic5257ae54f817e0d4a189c2294dcd633c9f2101a
Reviewed-on: https://go-review.googlesource.com/12241
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The one in misc/makerelease/makerelease.go is particularly bad and
probably warrants rotating our keys.
I didn't update old weekly notes, and reverted some changes involving
test code for now, since we're late in the Go 1.5 freeze. Otherwise,
the rest are all auto-generated changes, and all manually reviewed.
Change-Id: Ia2753576ab5d64826a167d259f48a2f50508792d
Reviewed-on: https://go-review.googlesource.com/12048
Reviewed-by: Rob Pike <r@golang.org>
This avoids both a write barrier and then dynamic initialization
globals of the form
var x something
var xp = unsafe.Pointer(&x)
Using static initialization avoids emitting a relocation for &x,
which helps cgo.
Fixes#9411.
Change-Id: I0dbf480859cce6ab57ab805d1b8609c45b48f156
Reviewed-on: https://go-review.googlesource.com/11693
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Russ Cox <rsc@golang.org>
We can't address more than this on amd64 anyway.
Fixes#9862.
Change-Id: Ifb1abae558e2e1ee2dc953a76995f3f08c60b1df
Reviewed-on: https://go-review.googlesource.com/11715
Reviewed-by: Austin Clements <austin@google.com>
Currently the runtime fails to clear a G's stack barriers in gfput if
the G's stack allocation is _FixedStack bytes. This causes the runtime
to panic if the following sequence of events happens:
1) The runtime installs stack barriers on a G.
2) The G exits by calling runtime.Goexit. Since this does not
necessarily return through the stack barriers installed on the G,
there may still be untriggered stack barriers left on the G's stack
in recorded in g.stkbar.
3) The runtime calls gfput to add the exiting G to the free pool. If
the G's stack allocation is _FixedStack bytes, we fail to clear
g.stkbar.
4) A new G starts and allocates the G that was just added to the free
pool.
5) The new G begins to execute and overwrites the stack slots that had
stack barriers in them.
6) The garbage collector enters mark termination, attempts to remove
stack barriers from the new G, and finds that they've been
overwritten.
Fix this by clearing the stack barriers in gfput in the case where it
reuses the stack.
Fixes#11256.
Change-Id: I377c44258900e6bcc2d4b3451845814a8eeb2bcf
Reviewed-on: https://go-review.googlesource.com/11461
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Reviewed-by: Russ Cox <rsc@golang.org>
In walkdiv, an OMUL node was created and passed to typecheck,
before the op was changed back to OHMUL. In some instances,
the node that came back was an evaluated literal constant that
occurred with a full multiply. The end result was a literal node
with a non-shifted value and an OHMUL op. This change causes code
to be generated for the OHMUL.
Fixes#11358Fixes#11369
Change-Id: If42a98c6830d07fe065d5ca57717704fb8cfbd33
Reviewed-on: https://go-review.googlesource.com/11400
Reviewed-by: Russ Cox <rsc@golang.org>
When heapBitsSetType repeats a source bitmap with a scalar tail
(typ.ptrdata < typ.size), it lays out the tail upon reaching the end
of the source bitmap by simply increasing the number of bits claimed
to be in the incoming bit buffer. This causes later iterations to read
the appropriate number of zeros out of the bit buffer before starting
on the next repeat of the source bitmap.
Currently, however, later iterations of the loop continue to read bits
from the source bitmap *regardless of the number of bits currently in
the bit buffer*. The bit buffer can only hold 32 or 64 bits, so if the
scalar tail is large and the padding bits exceed the size of the bit
buffer, the read from the source bitmap on the next iteration will
shift the incoming bits into oblivion when it attempts to put them in
the bit buffer. When the buffer does eventually shift down to where
these bits were supposed to be, it will contain zeros. As a result,
words that should be marked as pointers on later repetitions are
marked as scalars, so the garbage collector does not trace them. If
this is the only reference to an object, it will be incorrectly freed.
Fix this by adding logic to drain the bit buffer down if it is large
instead of reading more bits from the source bitmap.
Fixes#11286.
Change-Id: I964432c4b9f1cec334fc8c3da0ff16460203feb6
Reviewed-on: https://go-review.googlesource.com/11360
Reviewed-by: Russ Cox <rsc@golang.org>
When a method is called using the Type.Method(receiver, args...) syntax
without the receiver, or enough arguments, provide the more helpful
error message "not enough arguments in call to method expression
Type.Method" instead of the old message "not enough arguments in call
to Type.Method".
Fixes#8385
Change-Id: Id5037eb1ee5fa93687d4a6557b4a8233b29e9df2
Reviewed-on: https://go-review.googlesource.com/2193
Reviewed-by: Russ Cox <rsc@golang.org>
Also modified test/run.go to ignore messages prefixed <autogenerated>
because those cannot be described with "// ERROR ...", and backed out
patch from issue #9537 because it is no longer necessary. The reasons
described in the 9537 discussion for why escape analysis cannot run
late no longer hold, happily.
Fixes#11053.
Change-Id: Icb14eccdf2e8cde3d0f8fb8a216b765400a96385
Reviewed-on: https://go-review.googlesource.com/11088
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: David Chase <drchase@google.com>
Bool codegen was generating a temp for function calls
and other complex expressions, but was not using it.
This was a refactoring bug introduced by CL 7853.
The cmp code used to do (in short):
l, r := &n1, &n2
It was changed to:
l, r := nl, nr
But the requisite assignments:
nl, nr = &n1, &n2
were only introduced on one of two code paths.
Fixes#10654.
Change-Id: Ie8de0b3a333842a048d4308e02911bb10c6915ce
Reviewed-on: https://go-review.googlesource.com/10844
Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Minux Ma <minux@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
People invoking the linker directly already have to change their scripts
to use the new "go tool link", so this is a good time to make the -X flag
behave like all other Go flags and take just a single argument.
The old syntax will continue to be accepted (it is rewritten into the new
syntax before flag parsing). Maybe some day we will be able to retire it.
Even if we never retire the old syntax, having the new syntax at least
makes the rewriting much less of a kludge.
Change-Id: I91e8df94f4c22b2186e81d7f1016b8767d777eac
Reviewed-on: https://go-review.googlesource.com/10310
Reviewed-by: Rob Pike <r@golang.org>
