Currently, the process of suspending a goroutine is tied to stack
scanning. In preparation for non-cooperative preemption, this CL
abstracts this into general purpose suspendG/resumeG functions.
suspendG and resumeG closely follow the existing scang and restartg
functions with one exception: the addition of a _Gpreempted status.
Currently, preemption tasks (stack scanning) are carried out by the
target goroutine if it's in _Grunning. In this new approach, the task
is always carried out by the goroutine that called suspendG. Thus, we
need a reliable way to drive the target goroutine out of _Grunning
until the requesting goroutine is ready to resume it. The new
_Gpreempted state provides the handshake: when a runnable goroutine
responds to a preemption request, it now parks itself and enters
_Gpreempted. The requesting goroutine races to put it in _Gwaiting,
which gives it ownership, but also the responsibility to start it
again.
This CL adds several TODOs about improving the synchronization on the
G status. The existing code already has these problems; we're just
taking note of them.
The next CL will remove the now-dead scang and preemptscan.
For #10958, #24543.
Change-Id: I16dbf87bea9d50399cc86719c156f48e67198f16
Reviewed-on: https://go-review.googlesource.com/c/go/+/201137
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
mod_get_svn passes, and I also tested this manually on a real-world svn-hosted package:
example.com$ go mod init example.com
go: creating new go.mod: module example.com
example.com$ GOPROXY=direct GONOSUMDB=llvm.org go get -d llvm.org/llvm/bindings/go/llvm
go: finding llvm.org/llvm latest
go: finding llvm.org/llvm/bindings/go/llvm latest
go: downloading llvm.org/llvm v0.0.0-20191022153947-000000375505
go: extracting llvm.org/llvm v0.0.0-20191022153947-000000375505
example.com$ go list llvm.org/llvm/bindings/...
llvm.org/llvm/bindings/go
llvm.org/llvm/bindings/go/llvm
Fixes#26092
Change-Id: Iefe2151b82a0225c73bb6f8dd7cd8a352897d4c0
Reviewed-on: https://go-review.googlesource.com/c/go/+/203497
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
CL 198544 broke the linux/arm64 build because it declares emptyfunc for
GOARCH=arm64, but only freebsd/arm64 defines it. Make it a static
assembly function specific for freebsd/arm64 and remove the stub.
Fixes#35160
Change-Id: I5fd94249b60c6fd259c251407b6eccc8fa512934
Reviewed-on: https://go-review.googlesource.com/c/go/+/203418
Reviewed-by: Bryan C. Mills <bcmills@google.com>
bradfitz is actively thinking about a proper fix.
In the meantime, skip the test to suss out any other failures in the builder.
Updates #35122
Change-Id: I9bf0640222e3d385c1a3e2be5ab52b80d3e8c21a
Reviewed-on: https://go-review.googlesource.com/c/go/+/203500
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Previously, TestAtomicStop used a hard-coded 2-second timeout.
That empirically is not long enough on certain builders. Rather than
adjusting it to a different arbitrary value, use a slice of the
overall timeout for the test binary. If everything is working, we
won't block nearly that long anyway.
Updates #35085
Change-Id: I7b789388e3152413395088088fc497419976cf5c
Reviewed-on: https://go-review.googlesource.com/c/go/+/203499
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We already claim on the documentation for _Grunning that this is case,
but execute transitions to _Grunning before assigning g.m. Fix this
and make the documentation even more explicit.
For #10958, #24543, but also a good cleanup.
Change-Id: I1eb0108e7762f55cfb0282aca624af1c0a15fe56
Reviewed-on: https://go-review.googlesource.com/c/go/+/201440
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Currently, shrinkstack will not shrink a stack on Windows if
gp.m.libcallsp != 0. In general, we can't shrink stacks in syscalls
because the syscall may hold pointers into the stack, and in principle
this is supposed to be preventing that for libcall-based syscalls
(which are direct syscalls from the runtime). But this test is
actually broken and has been for a long time. That turns out to be
okay because it also appears it's not necessary.
This test is racy. g.m points to whatever M the G was last running on,
even if the G is in a blocked state, and that M could be doing
anything, including making libcalls. Hence, observing that libcallsp
== 0 at one moment in shrinkstack is no guarantee that it won't become
non-zero while we're shrinking the stack, and vice-versa.
It's also weird that this check is only performed on Windows, given
that we now use libcalls on macOS, Solaris, and AIX.
This check was added when stack shrinking was first implemented in CL
69580044. The history of that CL (though not the final version)
suggests this was necessary for libcalls that happened on Go user
stacks, which we never do now because of the limited stack space.
It could also be defending against user stack pointers passed to
libcall system calls from blocked Gs. But the runtime isn't allowed to
keep pointers into the user stack for blocked Gs on any OS, so it's
not clear this would be of any value.
Hence, this checks seems to be simply unnecessary.
Rather than simply remove it, this CL makes it defensive. We can't do
anything about blocked Gs, since it doesn't even make sense to look at
their M, but if a G tries to shrink its own stack while in a libcall,
that indicates a bug in the libcall code. This CL makes shrinkstack
panic in this case.
For #10958, #24543, since those are going to rearrange how we decide
that it's safe to shrink a stack.
Change-Id: Ia865e1f6340cff26637f8d513970f9ebb4735c6d
Reviewed-on: https://go-review.googlesource.com/c/go/+/173724
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The x86 assembler supports an "ADJSP" pseudo-op that compiles to an
ADD/SUB from SP. Unfortunately, while this seems perfect for an
instruction that would allow obj to continue to track the SP/FP delta,
obj currently doesn't do that. As a result, FP-relative references
won't work and, perhaps worse, the pcsp table will have the wrong
frame size.
We don't currently use this instruction in any assembly or generate it
in the compiler, but this is a perfect instruction for solving a
problem in #24543.
This CL makes ADJSP useful by incorporating it into the SP delta
logic.
One subtlety is that we do generate ADJSP in obj itself to open a
function's stack frame. Currently, when preprocess enters the loop to
compute the SP delta, it may or may not start at this ADJSP
instruction depending on various factors. We clean this up by instead
always starting the SP delta at 0 and always starting this loop at the
entry to the function.
Why not just recognize ADD/SUB of SP? The danger is that could change
the meaning of existing code. For example, walltime1 in
sys_linux_amd64.s saves SP, SUBs from it, and aligns it. Later, it
restores the saved copy and then does a few FP-relative references.
Currently obj doesn't know any of this is happening, but that's fine
once it gets to the FP-relative references. If we taught obj to
recognize the SUB, it would start to miscompile this code. An
alternative would be to recognize unknown instructions that write to
SP and refuse subsequent FP-relative references, but that's kind of
annoying.
This passes toolstash -cmp for std on both amd64 and 386.
Change-Id: Ic6c6a7cbf980bca904576676c07b44c0aaa9c82d
Reviewed-on: https://go-review.googlesource.com/c/go/+/200877
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
According to MSDN, "If the data has the REG_SZ, REG_MULTI_SZ or
REG_EXPAND_SZ type, this size includes any terminating null character or
characters unless the data was stored without them. [...] If the data
has the REG_SZ, REG_MULTI_SZ or REG_EXPAND_SZ type, the string may not
have been stored with the proper terminating null characters. Therefore,
even if the function returns ERROR_SUCCESS, the application should
ensure that the string is properly terminated before using it;
otherwise, it may overwrite a buffer."
It's therefore dangerous to pass it off unbounded as we do, and in fact
this led to crashes on real systems.
Change-Id: I6d786211814656f036b87fd78631466634cd764a
Reviewed-on: https://go-review.googlesource.com/c/go/+/202937
Run-TryBot: Jason A. Donenfeld <Jason@zx2c4.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
There were a couple of bugs, including not requiring a percent and
returning the wrong error for a bad format containing %%.
Both are addressed by fixing the first.
Fixes#34180.
Change-Id: If96c0c0258bcb95eec49871437d719cb9d399d9b
Reviewed-on: https://go-review.googlesource.com/c/go/+/202879
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Previously, codehost.Repo.ReadZip returned an 'actualSubdir' value
that was the empty string in all current implementations.
Updates #26092
Change-Id: I6708dd0f13ba88bcf1a1fb405e9d818fd6f9197e
Reviewed-on: https://go-review.googlesource.com/c/go/+/203277
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
This change adds the -modfile flag to module aware build commands and
to 'go mod' subcommands. -modfile may be set to a path to an alternate
go.mod file to be read and written. A real go.mod file must still
exist and is used to set the module root directory. However, it is not
opened.
When -modfile is set, the effective location of the go.sum file is
also changed to the -modfile with the ".mod" suffix trimmed (if
present) and ".sum" added.
Updates #34506
Change-Id: I2d1e044e18af55505a4f24bbff09b73bb9c908b4
Reviewed-on: https://go-review.googlesource.com/c/go/+/202564
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
base.Cwd should be used instead.
Change-Id: I3dbdecf745b0823160984cc942c883dc04c91d7b
Reviewed-on: https://go-review.googlesource.com/c/go/+/203037
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Sections will be filled in with individual CLs before Go 1.14.
NOTE: This document is currently in Markdown for ease of writing /
reviewing. Before Go 1.14, we will either ensure that x/website
can render Markdown (flavor TBD) or check in a rendered HTML file that
can be displayed directly.
Updates #33637
Change-Id: Icd43fa2bdb7d256b28a56b93214b70343f43492e
Reviewed-on: https://go-review.googlesource.com/c/go/+/202081
Reviewed-by: Bryan C. Mills <bcmills@google.com>
I had prohibited 'go list -m' with -mod=vendor because the module
graph is incomplete, but I've realized that many queries do not
actually require the full graph — and may, in fact, be driven using
modules previously reported by 'go list' for specific, vendored
packages. Queries for those modules should succeed.
Updates #33848
Change-Id: I1000b4cf586a830bb78faf620ebf62d73a3cb300
Reviewed-on: https://go-review.googlesource.com/c/go/+/203138
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Correct comment about allocating big enough slice to copy result of
Getdirentries.
While at it, also convert from Dirent directly to slice of byte.
Updates #35092
Change-Id: I892de7953120622882e1561728e1e56b009a2351
Reviewed-on: https://go-review.googlesource.com/c/go/+/202880
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Generate inline code at defer time to save the args of defer calls to unique
(autotmp) stack slots, and generate inline code at exit time to check which defer
calls were made and make the associated function/method/interface calls. We
remember that a particular defer statement was reached by storing in the deferBits
variable (always stored on the stack). At exit time, we check the bits of the
deferBits variable to determine which defer function calls to make (in reverse
order). These low-cost defers are only used for functions where no defers
appear in loops. In addition, we don't do these low-cost defers if there are too
many defer statements or too many exits in a function (to limit code increase).
When a function uses open-coded defers, we produce extra
FUNCDATA_OpenCodedDeferInfo information that specifies the number of defers, and
for each defer, the stack slots where the closure and associated args have been
stored. The funcdata also includes the location of the deferBits variable.
Therefore, for panics, we can use this funcdata to determine exactly which defers
are active, and call the appropriate functions/methods/closures with the correct
arguments for each active defer.
In order to unwind the stack correctly after a recover(), we need to add an extra
code segment to functions with open-coded defers that simply calls deferreturn()
and returns. This segment is not reachable by the normal function, but is returned
to by the runtime during recovery. We set the liveness information of this
deferreturn() to be the same as the liveness at the first function call during the
last defer exit code (so all return values and all stack slots needed by the defer
calls will be live).
I needed to increase the stackguard constant from 880 to 896, because of a small
amount of new code in deferreturn().
The -N flag disables open-coded defers. '-d defer' prints out the kind of defer
being used at each defer statement (heap-allocated, stack-allocated, or
open-coded).
Cost of defer statement [ go test -run NONE -bench BenchmarkDefer$ runtime ]
With normal (stack-allocated) defers only: 35.4 ns/op
With open-coded defers: 5.6 ns/op
Cost of function call alone (remove defer keyword): 4.4 ns/op
Text size increase (including funcdata) for go binary without/with open-coded defers: 0.09%
The average size increase (including funcdata) for only the functions that use
open-coded defers is 1.1%.
The cost of a panic followed by a recover got noticeably slower, since panic
processing now requires a scan of the stack for open-coded defer frames. This scan
is required, even if no frames are using open-coded defers:
Cost of panic and recover [ go test -run NONE -bench BenchmarkPanicRecover runtime ]
Without open-coded defers: 62.0 ns/op
With open-coded defers: 255 ns/op
A CGO Go-to-C-to-Go benchmark got noticeably faster because of open-coded defers:
CGO Go-to-C-to-Go benchmark [cd misc/cgo/test; go test -run NONE -bench BenchmarkCGoCallback ]
Without open-coded defers: 443 ns/op
With open-coded defers: 347 ns/op
Updates #14939 (defer performance)
Updates #34481 (design doc)
Change-Id: I63b1a60d1ebf28126f55ee9fd7ecffe9cb23d1ff
Reviewed-on: https://go-review.googlesource.com/c/go/+/202340
Reviewed-by: Austin Clements <austin@google.com>
The default value of cfg.BuildMod depends on the 'go' version in the
go.mod file. The go.mod file is read and parsed, and its settings are
applied, in modload.InitMod.
As it turns out, modload.Enabled does not invoke InitMod, so
cfg.BuildMod is not necessarily set even if modload.Enabled returns
true.
Updates #33848
Change-Id: I13a4dd80730528e6f1a5acc492fcfe07cb59d94e
Reviewed-on: https://go-review.googlesource.com/c/go/+/202917
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
A Rat is represented via a quotient a/b where a and b are Int values.
To make it possible to use an uninitialized Rat value (with a and b
uninitialized and thus == 0), the implementation treats a 0 denominator
as 1.
Rat.Num and Rat.Denom return pointers to these values a and b. Because
b may be 0, Rat.Denom used to first initialize it to 1 and thus produce
an undesirable side-effect (by changing the Rat's denominator).
This CL changes Denom to return a new (not shared) *Int with value 1
in the rare case where the Rat was not initialized. This eliminates
the side effect and returns the correct denominator value.
While this is changing behavior of the API, the impact should now be
minor because together with (prior) CL https://golang.org/cl/202997,
which initializes Rats ASAP, Denom is unlikely used to access the
denominator of an uninitialized (and thus 0) Rat. Any operation that
will somehow set a Rat value will ensure that the denominator is not 0.
Fixes#33792.
Updates #3521.
Change-Id: I0bf15ac60513cf52162bfb62440817ba36f0c3fc
Reviewed-on: https://go-review.googlesource.com/c/go/+/203059
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
A Rat is represented via a quotient a/b where a and b are Int values.
To make it possible to use an uninitialized Rat value (with a and b
uninitialized and thus == 0), the implementation treats a 0 denominator
as 1.
For each operation we check if the denominator is 0, and then treat
it as 1 (if necessary). Operations that create a new Rat result,
normalize that value such that a result denominator 1 is represened
as 0 again.
This CL changes this behavior slightly: 0 denominators are still
interpreted as 1, but whenever we (safely) can, we set an uninitialized
0 denominator to 1. This simplifies the code overall.
Also: Improved some doc strings.
Preparation for addressing issue #33792.
Updates #33792.
Change-Id: I3040587c8d0dad2e840022f96ca027d8470878a0
Reviewed-on: https://go-review.googlesource.com/c/go/+/202997
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
On ARM and ARM64, during a VDSO call, the g register may be
temporarily clobbered by the VDSO code. If a signal is received
during the execution of VDSO code, we may not find a valid g
reading the g register. In CL 192937, we conservatively assume
g is nil. But this approach has a problem: we cannot handle
the signal in this case. Further, if the signal is not a
profiling signal, we'll call badsignal, which calls needm, which
wants to get an extra m, but we don't have one in a non-cgo
binary, which cuases the program to hang.
This is even more of a problem with async preemption, where we
will receive more signals than before. I ran into this problem
while working on async preemption support on ARM64.
In this CL, before making a VDSO call, we save the g on the
gsignal stack. When we receive a signal, we will be running on
the gsignal stack, so we can fetch the g from there and move on.
We probably want to do the same for PPC64. Currently we rely on
that the VDSO code doesn't actually clobber the g register, but
this is not guaranteed and we don't have control with.
Idea from discussion with Dan Cross and Austin.
Should fix#34391.
Change-Id: Idbefc5e4c2f4373192c2be797be0140ae08b26e3
Reviewed-on: https://go-review.googlesource.com/c/go/+/202759
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Austin Clements <austin@google.com>
benchcmp was moved out of misc into x/tools in CL 60100043 in 2014,
and then replaced by a forwarding script in CL 82710043.
Five years have since passed, and the forwarding script has outlived
its usefulness. It's now more confusing than helpful. Delete it.
Change-Id: I8c7d65b97e0b3fe367df69a86ae10c7960c05be3
Reviewed-on: https://go-review.googlesource.com/c/go/+/202762
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
It turns out that Windows has "legitimate" keys that have bogus type
values or bogus lengths that don't correspond with their type. On up to
date Windows 10 systems, this test always fails for this reason. These
keys exist because of bugs in Microsoft's code. This commit works around
the problem by simply blacklisting known instances. It also expands the
error message a bit so that we can make adjustments should the problem
ever happen again, and reformats the messages so that it makes copy and
pasting into the blacklist easier.
Updates #35084
Change-Id: I50322828c0eb0ccecbb62d6bf4f9c726fa0b3c27
Reviewed-on: https://go-review.googlesource.com/c/go/+/202897
Run-TryBot: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Since CL 194600, search.CleanPaths preserves characters after '@' in
each argument. This was done so that paths could be cleaned while
version queries were preserved. However, local and absolute file paths
may contain '@' characters.
With this change, '@' is treated as a normal character by
search.CleanPaths in local and absolute paths.
Fixes#35115
Change-Id: Ia7d37e0a2737442d4f1796cc2fc3a59237a8ddfe
Reviewed-on: https://go-review.googlesource.com/c/go/+/202761
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This was disabled due to a report that the App Store rejects the symbol
__sysctl. However, we use the sysctl symbol, which is fine. The __sysctl
symbol is used by x/sys/unix, which needs fixing instead. So, this
commit reenables sysctl on iOS, so that things like net.InterfaceByName
can work again.
This reverts CL 193843, CL 193844, CL 193845, and CL 193846.
Fixes#35101
Updates #34133
Updates #35103
Change-Id: Ib8eb9f87b81db24965b0de29d99eb52887c7c60a
Reviewed-on: https://go-review.googlesource.com/c/go/+/202778
Run-TryBot: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Report the value returned by kevent, not the previously set errno which
is 0.
Found while debugging CL 198544
Change-Id: I854f5418f8ed8e083d909d328501355496c67a53
Reviewed-on: https://go-review.googlesource.com/c/go/+/202777
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Since the new timers run on g0, which does not have a race context,
we add a race context field to the P, and use that for timer functions.
This works since all timer functions are in the standard library.
Updates #27707
Change-Id: I8a5b727b4ddc8ca6fc60eb6d6f5e9819245e395b
Reviewed-on: https://go-review.googlesource.com/c/go/+/171882
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Since timers are now on a P, rather than having a G running timerproc,
timejump changes to return a P rather than a G.
Updates #27707
Change-Id: I3d05af2d664409a0fd906e709fdecbbcbe00b9a7
Reviewed-on: https://go-review.googlesource.com/c/go/+/171880
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
It turns out that Windows has "legitimate" keys that have bogus type
values or bogus lengths that don't correspond with their type. On up to
date Windows 10 systems, this test always fails for this reason.
So, this commit alters the test to simply log the discrepancy and move
on.
Fixes#35084
Change-Id: I56e12cc62aff49cfcc38ff01a19dfe53153976a0
Reviewed-on: https://go-review.googlesource.com/c/go/+/202678
Run-TryBot: Jason A. Donenfeld <Jason@zx2c4.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
It can still be manually disabled again using -d=checkptr=0.
It's also still disabled by default for GOOS=windows, because the
Windows standard library code has a lot of unsafe pointer conversions
that need updating.
Updates #34964.
Change-Id: Ie0b8b4fdf9761565e0dcb00d69997ad896ac233d
Reviewed-on: https://go-review.googlesource.com/c/go/+/201783
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This CL extends checkptrBase to recognize pointers into the stack and
data/bss sections. I was meaning to do this eventually anyway, but
it's also an easy way to workaround #35068.
Updates #35068.
Change-Id: Ib47f0aa800473a4fbc249da52ff03bec32c3ebe2
Reviewed-on: https://go-review.googlesource.com/c/go/+/202639
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
