Still to do: ARM64 and PPC64. These architectures are woefully underdocumented.
Change-Id: Iedcf767a7e0e1c931812351940bc08f0c3821212
Reviewed-on: https://go-review.googlesource.com/12110
Reviewed-by: Russ Cox <rsc@golang.org>
The old numerical names like 6.out.go are a relic from the old tools.
Easier to rename than explain.
The anames.go files were modified by go generate; no changes
beyond the explanatory comment at the top.
Change-Id: I84742c75c60e47724baa9d49a91fef1f8581f021
Reviewed-on: https://go-review.googlesource.com/12069
Run-TryBot: Rob Pike <r@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
These memstats are currently being computed by gcMark, which was
appropriate in Go 1.4, but gcMark is now just one part of a bigger
picture. In particular, it can't account for the sweep termination
pause time, it can't account for all of the mark termination pause
time, and the reported "pause end" and "last GC" times will be
slightly earlier than they really are.
Lift computing of these statistics into func gc, which has the
appropriate visibility into the process to compute them correctly.
Fixes one of the issues in #10323. This does not add new statistics
appropriate to the concurrent collector; it simply fixes existing
statistics that are being misreported.
Change-Id: I670cb16594a8641f6b27acf4472db15b6e8e086e
Reviewed-on: https://go-review.googlesource.com/11794
Reviewed-by: Russ Cox <rsc@golang.org>
Currently we report MemStats.PauseEnd in nanoseconds, but with no
particular 0 time. On Linux, the 0 time is when the host started. On
Darwin, it's the UNIX epoch. This is also inconsistent with the other
absolute time in MemStats, LastGC, which is always reported in
nanoseconds since 1970.
Fix PauseEnd so it's always reported in nanoseconds since 1970, like
LastGC.
Fixes one of the issues raised in #10323.
Change-Id: Ie2fe3169d45113992363a03b764f4e6c47e5c6a8
Reviewed-on: https://go-review.googlesource.com/11801
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
This change does clean up as preparation for fixing #11081.
- renames cfg to resolvConf for clarification
- adds a new type resolverConfig and its methods: init, update,
tryAcquireSema, releaseSema for mutual exclusion of resolv.conf data
- deflakes, simplifies tests for resolv.conf data; previously the tests
sometimes left some garbage in the data
Change-Id: I277ced853fddc3791dde40ab54dbd5c78114b78c
Reviewed-on: https://go-review.googlesource.com/10931
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Fixes#11307.
Fixes#11055.
Change-Id: I8d6b04cb509e62e27d6935b91ffe35fdaea4ebcd
Reviewed-on: https://go-review.googlesource.com/12028
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
Missed select case when adding the barrier last time.
All the more reason to refactor this code in Go 1.6.
Fixes#11643.
Change-Id: Ib0d19d6e0939296c0a3e06dda5e9b76f813bbc7e
Reviewed-on: https://go-review.googlesource.com/12086
Reviewed-by: Austin Clements <austin@google.com>
This is a copy of an upstream change to the tools repo:
https://go-review.googlesource.com/#/c/8924/
This is a second attempt at CL 8954, with the necessary change to
go/build's deps test.
Change-Id: Ib798498cf85fea0baec5667e9324d11f6ae8ad64
Reviewed-on: https://go-review.googlesource.com/9173
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This is clearly what was intended all along. ./all.bash passes with this
change.
Change-Id: I16996da11cf1e4d2dc2a4434b7611a724691e8dc
Reviewed-on: https://go-review.googlesource.com/12068
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Update #11654
Change-Id: Ia199b8dd349542ad8b92b463dd2f3734dd7e66a4
Reviewed-on: https://go-review.googlesource.com/12060
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The previous commit (git 2ae77376) just did golang.org. This one
includes golang.org subdomains like blog, play, and build.
Change-Id: I4469f7b307ae2a12ea89323422044e604c5133ae
Reviewed-on: https://go-review.googlesource.com/12071
Reviewed-by: Rob Pike <r@golang.org>
Adds the clarification that these functions return empty
string if the requested element is not available
Added fullstops
Fixes#11664
Change-Id: I84173862bc785240f7d3ee75a5023673264d172b
Reviewed-on: https://go-review.googlesource.com/12061
Reviewed-by: Rob Pike <r@golang.org>
The one in misc/makerelease/makerelease.go is particularly bad and
probably warrants rotating our keys.
I didn't update old weekly notes, and reverted some changes involving
test code for now, since we're late in the Go 1.5 freeze. Otherwise,
the rest are all auto-generated changes, and all manually reviewed.
Change-Id: Ia2753576ab5d64826a167d259f48a2f50508792d
Reviewed-on: https://go-review.googlesource.com/12048
Reviewed-by: Rob Pike <r@golang.org>
The default behaviour for fatal errors and runtime panics is to dump
the goroutine stack traces and exit with code 2. However, when the process is
owned by foreign code, it is suprising and inappropriate to suddenly exit
the whole process, even on fatal errors. Instead, re-use the crash behaviour
from GOTRACEBACK=crash and abort.
The motivating use case is issue #11382, where an Android crash reporter
is confused by an exiting process, but I believe the aborting behaviour
is appropriate for all cases where Go does not own the process.
The change is simple and contained and will enable reliable crash reporting
for Android apps in Go 1.5, but I'll leave it to others to judge whether it
is too late for Go 1.5.
Fixes#11382
Change-Id: I477328e1092f483591c99da1fbb8bc4411911785
Reviewed-on: https://go-review.googlesource.com/12032
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Recent change (CL 10370) unexpectedly broke TestRaiseException on
Windows XP amd64. I still do not know why. But reverting old
CL 8165 fixes the problem.
This effectively makes Windows XP amd64 use AddVectoredContinueHandler
instead of SetUnhandledExceptionFilter for exception handling. That is
what we do for all recent Windows versions too.
Fixes#11481
Change-Id: If2e8037711f05bf97e3c69f5a8d86af67c58f6fc
Reviewed-on: https://go-review.googlesource.com/11888
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
Reviewed-by: Daniel Theophanes <kardianos@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Instead of silently truncating integers to their expected range, check
that they're within range and emit errors if not. Intended to help
narrow down the cause of issue #11617.
Change-Id: Ia7b577270f8438ca7479262702371e26277f1ea7
Reviewed-on: https://go-review.googlesource.com/12050
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When GOROOT_FINAL is set when running all.bash, the tests are run
before the files are copied to GOROOT_FINAL. The tests are run with
GOROOT set, so most work fine. This fixes two cases that do not.
In cmd/go/go_test.go we were explicitly removing GOROOT from the
environment, causing tests that did not themselves explicitly set
GOROOT to fail. There was no need to explicitly remove GOROOT, so
don't do it. If people choose to run "go test cmd/go" with a bad
GOROOT, that is their own lookout.
In the runtime GDB test, the linker has told gdb to find the support
script in GOROOT_FINAL, which will fail. Check for that case, and
skip the test when we see it.
Fixes#11652.
Change-Id: I4d3a32311e3973c30fd8a79551aaeab6789d0451
Reviewed-on: https://go-review.googlesource.com/12021
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Don't treat IPv4-mapped link-local IP addresses as IPv6 link-local
addresses, an IPv4 broadcast address as a global unicast IP address.
Fixes#11585.
Change-Id: I6a7a0c0601f18638f5c624ab63e12ee40f77b182
Reviewed-on: https://go-review.googlesource.com/11883
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
People use 80-column terminals because their grandparents used
punched cards. When I last used a punched card, in 1978, it seemed
antiquated even then. But today, people still set their terminal
widths to 80 to honor the struggles their fallen ancestors made to
endure this painful technology.
We must all stand and salute the 80 column flag, or risk the opprobium
of our peers.
For Pete's sake, I don't even use a fixed-width font. I don't even
believe in columns.
Fixes#11639 with extreme reluctance.
P.S. To avoid the horror of an automatically folded line of text, this commit message has been formatted to fit on an 80-column line, except for this postscript.
Change-Id: Ia2eb2dcf293dabe804c22ee5abb4bbb703f45c33
Reviewed-on: https://go-review.googlesource.com/12011
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Section.Data returns disk section data, but those are rounded up to
some predefined value. Processing these as is confuses dwarf parser
because of garbage at the end. Truncate Section.Data as per memory
section description.
Sometimes dwarf sections have memory section size of 0
(for pe object files). Keep those to their disk size.
Fixes#11608
Change-Id: I8de0a2271201a24aa9ac8dac44f1e9c8a9285183
Reviewed-on: https://go-review.googlesource.com/11950
Reviewed-by: Ian Lance Taylor <iant@golang.org>
GODEBUG=netdns=1 prints a one-time strategy decision. (cgo or go DNS lookups)
GODEBUG=netdns=2 prints the per-lookup strategy as a function of the hostname.
The new "netcgo" build tag forces cgo DNS lookups.
GODEBUG=netdns=go (or existing build tag "netgo") forces Go DNS resolution.
GODEBUG=netdns=cgo (or new build tag "netcgo") forces libc DNS resolution.
Options can be combined with e.g. GODEBUG=netdns=go+1 or GODEBUG=netdns=2+cgo.
Fixes#11322Fixes#11450
Change-Id: I7a67e9f759fd0a02320e7803f9ded1638b19e861
Reviewed-on: https://go-review.googlesource.com/11584
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
sysmon triggers a GC if there has been no GC for two minutes.
Currently, this is a STW GC. There is no reason for this to be STW, so
make it concurrent.
Fixes#10261.
Change-Id: I92f3ac37272d5c2a31480ff1fa897ebad08775a9
Reviewed-on: https://go-review.googlesource.com/11955
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The architecture-specific details will be updated and expanded in
a subsequent CL (or series thereof).
Update #10096
Change-Id: I59c6be1fcc123fe8626ce2130e6ffe71152c87af
Reviewed-on: https://go-review.googlesource.com/11954
Reviewed-by: Russ Cox <rsc@golang.org>
Change the default behavior when showing the package docs
for a command to elide the symbols. This makes
go doc somecommand
show the top-level package docs only and hide the symbols,
which are probably irrelevant to the user. This has no effect
on explicit requests for internals, such as
go doc somecommand.sometype
The new -cmd flag restores the old behavior.
Fixes#10733.
Change-Id: I4d363081fe7dabf76ec8e5315770ac3609592f80
Reviewed-on: https://go-review.googlesource.com/11953
Reviewed-by: Russ Cox <rsc@golang.org>
They were missing from the inputs.
Unfortunately this means the .out files all have wrong line numbers,
but they are easy to update.
Change-Id: I254742f24ab803421f34d52d13b9afa93674edd6
Reviewed-on: https://go-review.googlesource.com/11958
Reviewed-by: Russ Cox <rsc@golang.org>
It was crashing.
This fixes the build for
GO15VENDOREXPERIMENT=1 go test -short runtime
Fixes#11416.
Change-Id: I74a9114cdd8ebafcc9d2a6f40bf500db19c6e825
Reviewed-on: https://go-review.googlesource.com/11964
Reviewed-by: Russ Cox <rsc@golang.org>
This avoids both a write barrier and then dynamic initialization
globals of the form
var x something
var xp = unsafe.Pointer(&x)
Using static initialization avoids emitting a relocation for &x,
which helps cgo.
Fixes#9411.
Change-Id: I0dbf480859cce6ab57ab805d1b8609c45b48f156
Reviewed-on: https://go-review.googlesource.com/11693
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Russ Cox <rsc@golang.org>
The recent https://golang.org/cl/11810 is reportedly a bit too
aggressive.
Apparently some HTTP requests in the wild do contain both a
Transfer-Encoding along with a bogus Content-Length. Instead of
returning a 400 Bad Request error, we should just ignore the
Content-Length like we did before.
Change-Id: I0001be90d09f8293a34f04691f608342875ff5c4
Reviewed-on: https://go-review.googlesource.com/11962
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The expansion of structure, array, slice, and map literals
does not use the right line number in its introduced assignments
to temporaries, which leads to incorrect line number attribution
for expressions in those literals.
Inlining also incorrectly replaced the line numbers of args to
inlined functions.
This was revealed in CL 9721 because a now-avoided temporary
assignment introduced the correct line number.
I.e. before CL 9721
"tmp_wrongline := expr"
was transformed to
"tmp_rightline := expr; tmp_wrongline := tmp_rightline"
Also includes a repair to CL 10334 involving line numbers
where a spurious -1 remained (should have been 0, now is 0).
Fixes#11400.
Change-Id: I3a4687efe463977fa1e2c996606f4d91aaf22722
Reviewed-on: https://go-review.googlesource.com/11730
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Sameer Ajmani <sameer@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Basic randomization of goroutine scheduling for -race mode.
It is probably possible to do much better (there's a paper linked
in the issue that I haven't read, for example), but this suffices
to introduce at least some unpredictability into the scheduling order.
The goal here is to have _something_ for Go 1.5, so that we don't
start hitting more of these scheduling order-dependent bugs
if we change the scheduler order again in Go 1.6.
For #11372.
Change-Id: Idf1154123fbd5b7a1ee4d339e93f97635cc2bacb
Reviewed-on: https://go-review.googlesource.com/11795
Reviewed-by: Austin Clements <austin@google.com>
