When the err from ReadFile is non-nil, we call t.Fatal(err).
Switch t.Fatal to t.Error + return.
ensure that close(results) happens on that code path as well.
Updates #17697.
Change-Id: Ifaacf27a76c175446d642086ff32f4386428080d
Reviewed-on: https://go-review.googlesource.com/32486
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This makes no practical difference, as SIGSTOP can not be caught, but
may as well be consistent.
Change-Id: I3efbbf092388bb3f6dccc94cf703c5d94d35f6a1
Reviewed-on: https://go-review.googlesource.com/32533
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This makes it possible to avoid tests where coverage affects the test
results by skipping them (or otherwise adjusting them) when coverage
is enabled.
Update #17699
Change-Id: Ifcc36cfcd88ebd677890e82ba80ee3d696ed3d7c
Reviewed-on: https://go-review.googlesource.com/32483
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Fixes#13290
Change-Id: I0f7e7683d86db501cbedb6a0b7349ceb0769701c
Reviewed-on: https://go-review.googlesource.com/32481
Reviewed-by: Martin Möhrmann <martisch@uos.de>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
sigfwd calls an arbitrary C signal handler function. The System V ABI
for x86_64 (and the most recent revision of the ABI for i386) requires
the stack to be 16-byte aligned.
Fixes: #17641
Change-Id: I77f53d4a8c29c1b0fe8cfbcc8d5381c4e6f75a6b
Reviewed-on: https://go-review.googlesource.com/32107
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Go's http1 implementation originally had a mechanism to send HTTP
trailers based on pre-declaring the trailer keys whose values you'd
later let after the header was written.
http2 copied the same mechanism, but it was found to be unsufficient
for gRPC's wire protocol. A second trailer mechanism was added later
(but only to http2) for handlers that want to send a trailer without
knowing in advance they'd need to.
Copy the same mechanism back to http1 and document it.
Fixes#15754
Change-Id: I8c40d55e28b0e5b7087d3d1a904a392c56ee1f9b
Reviewed-on: https://go-review.googlesource.com/32479
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Skip TestObjdumpPowerManual if the host system is not ppc64 or ppc64le.
This test depends on using the host objdump and comparing output, which
does not work as expected if the test is run on another host.
Orignates from golang.org/x/arch/ppc64/ppc64asm commit 8e2d4898.
Fixes#17698
Change-Id: I956b0fb78c5ec33641db752d46a755008403d269
Reviewed-on: https://go-review.googlesource.com/32531
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This should never be called but should help identify causes of
unexpected panics such as in issue #17716.
Change-Id: Id6ad0cef1088a41bfcc69110a93484a7e39c4128
Reviewed-on: https://go-review.googlesource.com/32480
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Alan Donovan <adonovan@google.com>
Fixes#17683
Change-Id: I46f45c63796b58e8a8f14e37592231cbe7cd6934
Reviewed-on: https://go-review.googlesource.com/32438
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The introduction of -buildmode=plugin means modules can be added to a
Go program while it is running. This means there exists some time
while the program is running with the module is on the moduledata
linked list, but it has not been initialized to the satisfaction of
other parts of the runtime. Notably, the GC.
This CL adds a new way of access modules, an activeModules function.
It returns a slice of modules that is built in the background and
atomically swapped in. The parts of the runtime that need to wait on
module initialization can use this slice instead of the linked list.
Fixes#17455
Change-Id: I04790fd07e40c7295beb47cea202eb439206d33d
Reviewed-on: https://go-review.googlesource.com/32357
Reviewed-by: Ian Lance Taylor <iant@golang.org>
There is no benefit to folding ADDconsts unless the resultant immediate
will fit into a 20-bit signed integer, so limit these rules accordingly.
Also the signed load operations were missing, so I've added them, and
I've also removed some MOVDaddr rules that were dead code (MOVDaddrs
are rematerializable on s390x which means they can't take inputs other
than SP or SB).
Change-Id: Iebeba78da37d3d71d32d4b7f49fe4ea9095d40ec
Reviewed-on: https://go-review.googlesource.com/30616
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
- Adds overflow checks
- Adds parsing of negative integers
- Adds boolean return value to signal parsing errors
- Adds atoi32 for parsing of integers that fit in an int32
- Adds tests
Handling of errors to provide error messages
at the call sites is left to future CLs.
Updates #17718
Change-Id: I3cacd0ab1230b9efc5404c68edae7304d39bcbc0
Reviewed-on: https://go-review.googlesource.com/32390
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This implements a check that can be done at runtime for the ISA level and
hardware capability. It follows the same implementation as in s390x.
These checks will be important as we enable new instructions and write go
asm implementations using those.
Updates #15403Fixes#16643
Change-Id: Idfee374a3ffd7cf13a7d8cf0a6c83d247d3bee16
Reviewed-on: https://go-review.googlesource.com/32330
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In a previous change, cmd/go was taught to show a "no tests ran" warning
if test did nothing. But it missed a case - if no tests nor examples ran
but any benchmarks were meant to be run, it would still produce the
warning. This meant that running only benchmarks, which is common, would
be confusing:
$ go test -run='^$' -bench=.
testing: warning: no tests to run
BenchmarkFoo-4 300000 5056 ns/op
[...]
I believe this was because of a copy-paste error in the tests. This was
being tested, but on the wrong file which does contain a test that was
being run. Fix the path and fix the now failing test by never showing
the warning if -bench was given a non-empty string.
The rationale is that if -bench was given but there was no output, it's
obvious that nothing happened as benchmarks always produce output even
without -v. So showing a warning in those cases is redundant.
To make future typos less likely, make sure that no tests are being run
in the cases where we only want to run benchmarks.
Fixes#17603.
Change-Id: I4c626caf39f72260c6a9761c06446663f465f947
Reviewed-on: https://go-review.googlesource.com/32157
Reviewed-by: Marcel van Lohuizen <mpvl@golang.org>
Run-TryBot: Marcel van Lohuizen <mpvl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Adds ModifyResponse, an optional func to ReverseProxy
that modifies a response in the backend, right before
the headers of the response are written to the internal
response writer.
If ModifyResponse returns an error, the proxy returns
a StatusBadGateway error.
Fixes#14237.
Change-Id: I8e03139e34dea0084512ccbd8cc49e941bf9fb5d
Reviewed-on: https://go-review.googlesource.com/32356
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL expands upon a change made in (http://golang.org/cl/21811)
to ensure that a nil RawMessage gets serialized as "null" instead of
being a nil slice.
The added check only triggers when the RawMessage is nil. We do not
handle the case when the RawMessage is non-nil, but empty.
Fixes#17704
Updates #14493
Change-Id: I0fbebcdd81f7466c5b78c94953afc897f162ceb4
Reviewed-on: https://go-review.googlesource.com/32472
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If no error handler is provided, terminate parsing with first error
and report that error.
Fixes#17697.
Change-Id: I9070faf7239bd53725de141507912b92ded3474b
Reviewed-on: https://go-review.googlesource.com/32456
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Also updates x/net/http2 to git rev 541150 for:
http2: add support for graceful shutdown of Server
https://golang.org/cl/32412
http2: make http2.Server access http1's Server via an interface check
https://golang.org/cl/32417Fixes#4674Fixes#9478
Change-Id: I8021a18dee0ef2fe3946ac1776d2b10d3d429052
Reviewed-on: https://go-review.googlesource.com/32329
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Currently we have write barriers for direct channel sends, where the
receiver is blocked and the sender is writing directly to the
receiver's stack; but not for direct channel receives, where the
sender is blocked and the receiver is reading directly from the
sender's stack.
This was okay with the old write barrier because either 1) the
receiver would write the received pointer into the heap (causing it to
be shaded), 2) the pointer would still be on the receiver's stack at
mark termination and we would rescan it, or 3) the receiver dropped
the pointer so it wasn't necessarily reachable anyway.
This is not okay with the write barrier because it lets a grey stack
send a white pointer to a black stack and then remove it from its own
stack. If the grey stack was the sole grey-protector of this pointer,
this hides the object from the garbage collector.
Fix this by making direct receives perform a stack-to-stack write
barrier just like direct sends do.
Fixes#17694.
Change-Id: I1a4cb904e4138d2ac22f96a3e986635534a5ae41
Reviewed-on: https://go-review.googlesource.com/32450
Reviewed-by: Rick Hudson <rlh@golang.org>
typecheckcomplit nils out node's type, upon finding new errors.
This hides new errors in children's node as well as the type info
of current node. This change fixes that.
Fixes#17645.
Change-Id: Ib473291f31c7e8fa0307cb1d494e0c112ddd3583
Reviewed-on: https://go-review.googlesource.com/32324
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, assists can only perform heap marking jobs. However, at the
beginning of GC, there are only root jobs and no heap marking jobs. As
a result, there's often a period at the beginning of a GC cycle where
no goroutine has accumulated assist credit, but at the same time it
can't get any credit because there are no heap marking jobs for it to
do yet. As a result, many goroutines often block on the assist queue
at the very beginning of the GC cycle.
This commit fixes this by allowing assists to perform root marking
jobs. The tricky part of this (and the reason we haven't done this
before) is that stack scanning jobs can lead to deadlocks if the
goroutines performing the stack scanning are themselves
non-preemptible, since two non-preemptible goroutines may try to scan
each other. To address this, we use the same insight d6625ca used to
simplify the mark worker stack scanning: as long as we're careful with
the stacks and only drain jobs while on the system stack, we can put
the goroutine into a preemptible state while we drain jobs. This means
an assist's user stack can be scanned while it continues to do work.
This reduces the rate of assist blocking in the x/benchmarks HTTP
benchmark by a factor of 3 and all remaining blocking happens towards
the *end* of the GC cycle, when there may genuinely not be enough work
to go around.
Ideally, assists would get credit for working on root jobs. Currently
they do not; however, this change prioritizes heap work over root jobs
in assists, so they're likely to mostly perform heap work. In contrast
with mark workers, for assists, the root jobs act only as a backstop
to create heap work when there isn't enough heap work.
Fixes#15361.
Change-Id: If6e169863e4ad75710b0c8dc00f6125b41e9a595
Reviewed-on: https://go-review.googlesource.com/32432
Reviewed-by: Rick Hudson <rlh@golang.org>
This lifts the part of gcAssistAlloc that runs on the system stack to
its own function in preparation for letting assists perform root jobs
(notably stack scanning). This makes it easy to see that there are no
references to the user stack once we've entered gcAssistAlloc1, which
means it's safe to shrink the stack while in gcAssistAlloc1.
This does not yet make assists perform root jobs, so it's not actually
possible for the stack to shrink yet. That will happen in the next
commit.
The code in gcAssistAlloc1 is identical to the code that's currently
passed in a closure to systemstack with one exception. Currently, we
set the "completed" variable in the enclosing scope to indicate that
the assist completed the mark phase. This is exactly the sort of
cross-stack reference lifting this function is meant to prevent. We
replace this variable with setting gp.param to nil or non-nil to
indicate the completion status.
Updates #15361.
Change-Id: Iba7cfb758c781070a441aea86c0117b399a24dbd
Reviewed-on: https://go-review.googlesource.com/32431
TryBot-Result: Gobot Gobot <gobot@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Rick Hudson <rlh@golang.org>
Previously, on encountering Func.Nname.Type == nil, typecheckfunc()
returned without initializing Decldepth for that func. This causes
typecheckclosure() to fatal. This change ensures that we initialize
Decldepth in all cases.
Fixes#17588.
Change-Id: I2e3c81ad52e8383395025388989e8dbf03438b68
Reviewed-on: https://go-review.googlesource.com/32415
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We used to have to keep on-stack copies of these types.
Now they can be registerized.
[0]T is kind of trivial but might as well handle it.
This change enables another change I'm working on to improve how x.(T)
expressions are handled (#17405). This CL helps because now all
types that are direct interface types are registerizeable (e.g. [1]*byte).
No higher-degree arrays for now because non-constant indexes are hard.
Update #17405
Change-Id: I2399940965d17b3969ae66f6fe447a8cefdd6edd
Reviewed-on: https://go-review.googlesource.com/32416
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This is an extension of
https://go-review.googlesource.com/c/31662/
to mark all the temporaries, not just the ssa-generated ones.
Before-and-after ls -l `go tool -n compile` shows a 3%
reduction in size (or rather, a prior 3% inflation for
failing to filter temps out properly.)
Replaced name-dependent "is it a temp?" tests with calls to
*Node.IsAutoTmp(), which depends on AutoTemp. Also replace
calls to istemp(n) with n.IsAutoTmp(), to reduce duplication
and clean up function name space. Generated temporaries
now come with a "." prefix to avoid (apparently harmless)
clashes with legal Go variable names.
Fixes#17644.
Fixes#17240.
Change-Id: If1417f29c79a7275d7303ddf859b51472890fd43
Reviewed-on: https://go-review.googlesource.com/32255
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This picks up just a trivial fix,
making vet (and thus me) happy.
Change-Id: Ib82ae44c081ff1ec5c078196a6cd5e1a3505d03b
Reviewed-on: https://go-review.googlesource.com/32427
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
-M, -P, and -R were for debugging backend passes that no longer
exists.
-g is used for debugging instructions generated with Gins, but the SSA
backend mostly generates instructions directly. The handful of
instructions still generated with Gins are pretty useless for
debugging.
-x was used to debug the old lexer, but now it only causes us to print
file names as they're parsed, and only if we manually hack the
compiler to enable tracing.
Change-Id: Ia58d4bc9c1312693466171a3fcefc1221e9a2381
Reviewed-on: https://go-review.googlesource.com/32428
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Adds an assembly implementation of sha256.block for ppc64le to improve its
performance. This implementation is largely based on the original amd64
implementation, which unrolls the 64 iterations of the inner loop.
Fixes#17652
benchmark old ns/op new ns/op delta
BenchmarkHash8Bytes 1263 767 -39.27%
BenchmarkHash1K 14048 7766 -44.72%
BenchmarkHash8K 102245 55626 -45.60%
benchmark old MB/s new MB/s speedup
BenchmarkHash8Bytes 6.33 10.43 1.65x
BenchmarkHash1K 72.89 131.85 1.81x
BenchmarkHash8K 80.12 147.27 1.84x
Change-Id: Ib4adf429423b20495580400be10bd7e171bcc70b
Reviewed-on: https://go-review.googlesource.com/32318
Reviewed-by: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Adds an assembly implementation of sha512.block for ppc64le to improve its
performance. This implementation is largely based on the original amd64
implementation, unrolling the 80 iterations of the inner loop.
Fixes#17660
benchmark old ns/op new ns/op delta
BenchmarkHash8Bytes 1715 1133 -33.94%
BenchmarkHash1K 10098 5513 -45.41%
BenchmarkHash8K 68004 35278 -48.12%
benchmark old MB/s new MB/s speedup
BenchmarkHash8Bytes 4.66 7.06 1.52x
BenchmarkHash1K 101.40 185.72 1.83x
BenchmarkHash8K 120.46 232.21 1.93x
Change-Id: Ifd55a49a24cb159b3a09a8e928c3f37727aca103
Reviewed-on: https://go-review.googlesource.com/32320
Reviewed-by: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
These were accidentally removed by a rollback cl: golang.org/cl/32441
Change-Id: I0cfa8b3397be324dabfb8f33b6548a03c10571eb
Reviewed-on: https://go-review.googlesource.com/32334
Reviewed-by: Alan Donovan <adonovan@google.com>
This reverts commit b33030a727.
Reason for revert: We're going to try to get the code in this change
submitted in smaller, more carefully reviewed changes.
Change-Id: I4175f4b297f0e69fb78b11f9dc0bd82f27865be7
Reviewed-on: https://go-review.googlesource.com/32441
Reviewed-by: Russ Cox <rsc@golang.org>
Also add a link to more information about isolation levels as defined by the
SQL standard. Fixes#17682.
Change-Id: I94c53b713f4c882af40cf15fe5f1e5dbc53ea741
Reviewed-on: https://go-review.googlesource.com/32418
Reviewed-by: Daniel Theophanes <kardianos@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Does not handle imports of packages with exported aliases yet.
For #17592.
Change-Id: Iee63fb9d521014995003a417271fbe0384ae04ef
Reviewed-on: https://go-review.googlesource.com/32108
Reviewed-by: Alan Donovan <adonovan@google.com>
The map[typeOff]*_type object is created at run time and stored in
the moduledata. The moduledata object is marked by the linker as
SNOPTRDATA, so the reference is ignored by the GC. Running
misc/cgo/testplugin/test.bash with GOGC=1 will eventually collect
the typemap and crash.
This bug probably comes up in -linkshared binaries in Go 1.7.
I don't know why we haven't seen a report about this yet.
Fixes#17680
Change-Id: I0e9b5c006010e8edd51d9471651620ba665248d3
Reviewed-on: https://go-review.googlesource.com/32430
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Plumb the import path of a plugin package through to the linker, and
use it as the prefix on the exported symbol names.
Before this we used the basename of the plugin file as the prefix,
which could conflict and result in multiple loaded plugins sharing
symbols that are distinct.
Fixes#17155Fixes#17579
Change-Id: I7ce966ca82d04e8507c0bcb8ea4ad946809b1ef5
Reviewed-on: https://go-review.googlesource.com/32355
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Previously, we were off by one.
Also fix a comment typo.
Change-Id: Ib94d23acc56d5fccd44144f71655481f98803ac8
Reviewed-on: https://go-review.googlesource.com/32149
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is convenient for direct use of `go tool cgo`. We can also use it
from the go tool to reduce the length of the file names that cgo
generates.
Update #17070.
Change-Id: I8466a0a2cc68a732d17d07319e303497715bac8c
Reviewed-on: https://go-review.googlesource.com/32354
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This field is a zero length array and has little use. Since Go 1.5, trailing
zero-length arrays take up space. Both syscall.UnixRights() and
syscall.ParseSocketControlMessage() depend on being able to do an unsafe cast
of socket control message data to Cmsghdr this is only safe if the socket
control message data is greater than or equal to the size of Cmsghdr. Since
control message data that is equal in size to Cmsghdr without X__cmsg_data is
a valid socket control message, we must remove X__cmsg_data or not perform the
unsafe cast.
Removing X__cmsg_data will prevent Go code that uses X__cmsg_data from
compiling, but removing the unsafe cast will cause Go code that uses
X__cmsg_data to fail or exhibit undefined behavior at runtime. It was
therefore decided that removing X__cmsg_data was the better option.
Fixes#17649
Change-Id: I39f323f978eca09d62da5785c5c5c9c7cbdf8c31
Reviewed-on: https://go-review.googlesource.com/32319
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Prior to this change, it was implied that transaction properties
would be carried in the context value. However, no such properties
were defined, not even common ones. Define two common properties:
isolation level and read-only. Drivers may choose to support
additional transaction properties. It is not expected any
further transaction properties will be added in the future.
Change-Id: I2f680115a14a1333c65ba6f943d9a1149d412918
Reviewed-on: https://go-review.googlesource.com/31258
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
No point in computing this info on startup.
Compute it at build time.
This lets us spend more time computing & checking the size classes.
Improve the div magic for rounding to the start of an object.
We can now use 32-bit multiplies & shifts, which should help
32-bit platforms.
The static data is <1KB.
The actual size classes are not changed by this CL.
Change-Id: I6450cec7d1b2b4ad31fd3f945f504ed2ec6570e7
Reviewed-on: https://go-review.googlesource.com/32219
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This fixes systems for which ccache is the default compiler.
Also remove a couple of temporary files created by TestImportMain.
Fixes#17668.
Change-Id: I1edefdcec5f417be0533c146253c35ff4928c1c0
Reviewed-on: https://go-review.googlesource.com/32328
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Provides redirection support for 307, 308 server statuses.
Provides redirection support for DELETE method.
Updates old tests that assumed all redirects were treated
the way 301, 302 and 303 are processed.
Fixes#9348Fixes#10767Fixes#13994
Change-Id: Iffa8dbe0ff28a1afa8da59869290ec805b1dd2c4
Reviewed-on: https://go-review.googlesource.com/29852
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The GZIP format records the ModTime as an uint32 counting seconds since
the Unix epoch. The zero value is explicitly defined in section 2.3.1
as meaning no timestamp is available.
Currently, the Writer always encodes the ModTime even if it is the zero
time.Time value, which causes the Writer to try and encode the value
-62135596800 into the uint32 MTIME field. This causes an overflow and
results in our GZIP files having MTIME fields indicating a date in 2042-07-13.
We alter the Writer to only encode ModTime if the value does not underflow
the MTIME field (i.e., it is newer than the Unix epoch). We do not attempt
to fix what happens when the timestamp overflows in the year 2106.
We alter the Reader to only decode ModTime if the value is non-zero.
There is no risk of overflowing time.Time when decoding.
Fixes#17663
Change-Id: Ie1b65770c6342cd7b14aeebe10e5a49e6c9eb730
Reviewed-on: https://go-review.googlesource.com/32325
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
After the final slash, dots are %-escaped when constructing a symbol name,
so that in the actual symbol table, the import path githost.com/my.git
becomes githost.com/my%2egit. In this case, -X githost.com/my.git.Value=foo
needs to set githost.com/my%2egit.Value. This is a detail of the object format
and not something users should know or depend on, so apply the escaping
as needed.
People who have run across this already and figured out and started using
the escaped forms with -X will find those forms not working anymore.
That is, -X githost.com/my%2egit.Value=foo is the Go 1.7 workaround but
will stop working in Go 1.8 once this proper fix is in place.
People who need to keep scripts working with older and newer versions of Go
can safely pass both forms, and one will be ignored:
-X githost.com/my%2egit.Value=foo -X githost.com/my.git.Value=foo
Fixes#16710.
Change-Id: I0e994ccdd412a4eb8349fefce9aeb3bfc9a83cd8
Reviewed-on: https://go-review.googlesource.com/31970
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The filepath.Abs function in windows did not call Clean as the
documentation claimed. This change not only fixes that behavior but
also adjusts TestAbs to verify Abs calls Clean as documented.
Fixes#17210
Change-Id: I20c5f5026042fd7bd9d929ff5b17c8b2653f8afe
Reviewed-on: https://go-review.googlesource.com/32292
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Improves the error message by moving the field name before the body
of a struct, in the error message for unknown fields for structs.
* Exhibit:
Given program:
package main
import "time"
func main() {
_ = struct {
about string
before map[string]uint
update map[string]int
updateTime time.Time
expect map[string]int
}{
about: "this one",
updates: map[string]int{"gopher": 10},
}
}
* Before:
./issue17631.go:20: unknown struct { about string; before map[string]uint;
update map[string]int; updateTime time.Time; expect map[string]int } field
'updates' in struct literal
* After:
./issue17631.go:20: unknown field 'updates' in struct literal of type { about string;
before map[string]uint; update map[string]int; updateTime time.Time;
expect map[string]int }
Fixes#17631
Change-Id: I76842616411b931b5ad7a76bd42860dfde7739f4
Reviewed-on: https://go-review.googlesource.com/32240
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
I did 'export GORACE=atexit_sleep_ms=0' in a console
and then was puzzled as to why race tests fail.
Existing GORACE env var may (or may not) override
the one that we setup.
Filter out GORACE as we do for other important env vars.
Change-Id: I29be86b0cbb9b5dc7f9efb15729ade86fc79b0e0
Reviewed-on: https://go-review.googlesource.com/32163
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The docs used to imply that using == would compare Locations, but of
course it just compares Location pointers, which will have unpredictable
results depending on how the pointers are loaded.
Change-Id: I783c1309e476a9616a1c1c290eac713aba3b0b57
Reviewed-on: https://go-review.googlesource.com/32332
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
On solaris/amd64 sometimes the reported cycle count is negative. Replace
with 0.
Change-Id: I364eea5ca072281245c7ab3afb0bf69adc3a8eae
Reviewed-on: https://go-review.googlesource.com/32258
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Use "have" and "want" and multiple lines like other similar error
messages. Also, fix handling of ... and multi-value function calls.
Fixes#17650.
Change-Id: I4850e79c080eac8df3b92a4accf9e470dff63c9a
Reviewed-on: https://go-review.googlesource.com/32261
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
On amd64p32, rt0_go attempts to reserve 128 bytes of scratch space on
the stack, but due to a register mixup this ends up being a no-op. Fix
this so we actually reserve the stack space.
Change-Id: I04dbfbeb44f3109528c8ec74e1136bc00d7e1faa
Reviewed-on: https://go-review.googlesource.com/32331
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
With the hybrid barrier in place, we can now disable stack rescanning
by default. This commit adds a "gcrescanstacks" GODEBUG variable that
is off by default but can be set to re-enable STW stack rescanning.
The plan is to leave this off but available in Go 1.8 for debugging
and as a fallback.
With this change, worst-case mark termination time at GOMAXPROCS=12
*not* including time spent stopping the world (which is still
unbounded) is reliably under 100 µs, with a 95%ile around 50 µs in
every benchmark I tried (the go1 benchmarks, the x/benchmarks garbage
benchmark, and the gcbench activegs and rpc benchmarks). Including
time spent stopping the world usually adds about 20 µs to total STW
time at GOMAXPROCS=12, but I've seen it add around 150 µs in these
benchmarks when a goroutine takes time to reach a safe point (see
issue #10958) or when stopping the world races with goroutine
switches. At GOMAXPROCS=1, where this isn't an issue, worst case STW
is typically 30 µs.
The go-gcbench activegs benchmark is designed to stress large numbers
of dirty stacks. This commit reduces 95%ile STW time for 500k dirty
stacks by nearly three orders of magnitude, from 150ms to 195µs.
This has little effect on the throughput of the go1 benchmarks or the
x/benchmarks benchmarks.
name old time/op new time/op delta
XGarbage-12 2.31ms ± 0% 2.32ms ± 1% +0.28% (p=0.001 n=17+16)
XJSON-12 12.4ms ± 0% 12.4ms ± 0% +0.41% (p=0.000 n=18+18)
XHTTP-12 11.8µs ± 0% 11.8µs ± 1% ~ (p=0.492 n=20+18)
It reduces the tail latency of the x/benchmarks HTTP benchmark:
name old p50-time new p50-time delta
XHTTP-12 489µs ± 0% 491µs ± 1% +0.54% (p=0.000 n=20+18)
name old p95-time new p95-time delta
XHTTP-12 957µs ± 1% 960µs ± 1% +0.28% (p=0.002 n=20+17)
name old p99-time new p99-time delta
XHTTP-12 1.76ms ± 1% 1.64ms ± 1% -7.20% (p=0.000 n=20+18)
Comparing to the beginning of the hybrid barrier implementation
("runtime: parallelize STW mcache flushing") shows that the hybrid
barrier trades a small performance impact for much better STW latency,
as expected. The magnitude of the performance impact is generally
small:
name old time/op new time/op delta
BinaryTree17-12 2.37s ± 1% 2.42s ± 1% +2.04% (p=0.000 n=19+18)
Fannkuch11-12 2.84s ± 0% 2.72s ± 0% -4.00% (p=0.000 n=19+19)
FmtFprintfEmpty-12 44.2ns ± 1% 45.2ns ± 1% +2.20% (p=0.000 n=17+19)
FmtFprintfString-12 130ns ± 1% 134ns ± 0% +2.94% (p=0.000 n=18+16)
FmtFprintfInt-12 114ns ± 1% 117ns ± 0% +3.01% (p=0.000 n=19+15)
FmtFprintfIntInt-12 176ns ± 1% 182ns ± 0% +3.17% (p=0.000 n=20+15)
FmtFprintfPrefixedInt-12 186ns ± 1% 187ns ± 1% +1.04% (p=0.000 n=20+19)
FmtFprintfFloat-12 251ns ± 1% 250ns ± 1% -0.74% (p=0.000 n=17+18)
FmtManyArgs-12 746ns ± 1% 761ns ± 0% +2.08% (p=0.000 n=19+20)
GobDecode-12 6.57ms ± 1% 6.65ms ± 1% +1.11% (p=0.000 n=19+20)
GobEncode-12 5.59ms ± 1% 5.65ms ± 0% +1.08% (p=0.000 n=17+17)
Gzip-12 223ms ± 1% 223ms ± 1% -0.31% (p=0.006 n=20+20)
Gunzip-12 38.0ms ± 0% 37.9ms ± 1% -0.25% (p=0.009 n=19+20)
HTTPClientServer-12 77.5µs ± 1% 78.9µs ± 2% +1.89% (p=0.000 n=20+20)
JSONEncode-12 14.7ms ± 1% 14.9ms ± 0% +0.75% (p=0.000 n=20+20)
JSONDecode-12 53.0ms ± 1% 55.9ms ± 1% +5.54% (p=0.000 n=19+19)
Mandelbrot200-12 3.81ms ± 0% 3.81ms ± 1% +0.20% (p=0.023 n=17+19)
GoParse-12 3.17ms ± 1% 3.18ms ± 1% ~ (p=0.057 n=20+19)
RegexpMatchEasy0_32-12 71.7ns ± 1% 70.4ns ± 1% -1.77% (p=0.000 n=19+20)
RegexpMatchEasy0_1K-12 946ns ± 0% 946ns ± 0% ~ (p=0.405 n=18+18)
RegexpMatchEasy1_32-12 67.2ns ± 2% 67.3ns ± 2% ~ (p=0.732 n=20+20)
RegexpMatchEasy1_1K-12 374ns ± 1% 378ns ± 1% +1.14% (p=0.000 n=18+19)
RegexpMatchMedium_32-12 107ns ± 1% 107ns ± 1% ~ (p=0.259 n=18+20)
RegexpMatchMedium_1K-12 34.2µs ± 1% 34.5µs ± 1% +1.03% (p=0.000 n=18+18)
RegexpMatchHard_32-12 1.77µs ± 1% 1.79µs ± 1% +0.73% (p=0.000 n=19+18)
RegexpMatchHard_1K-12 53.6µs ± 1% 54.2µs ± 1% +1.10% (p=0.000 n=19+19)
Template-12 61.5ms ± 1% 63.9ms ± 0% +3.96% (p=0.000 n=18+18)
TimeParse-12 303ns ± 1% 300ns ± 1% -1.08% (p=0.000 n=19+20)
TimeFormat-12 318ns ± 1% 320ns ± 0% +0.79% (p=0.000 n=19+19)
Revcomp-12 (*) 509ms ± 3% 504ms ± 0% ~ (p=0.967 n=7+12)
[Geo mean] 54.3µs 54.8µs +0.88%
(*) Revcomp is highly non-linear, so I only took samples with 2
iterations.
name old time/op new time/op delta
XGarbage-12 2.25ms ± 0% 2.32ms ± 1% +2.74% (p=0.000 n=16+16)
XJSON-12 11.6ms ± 0% 12.4ms ± 0% +6.81% (p=0.000 n=18+18)
XHTTP-12 11.6µs ± 1% 11.8µs ± 1% +1.62% (p=0.000 n=17+18)
Updates #17503.
Updates #17099, since you can't have a rescan list bug if there's no
rescan list. I'm not marking it as fixed, since gcrescanstacks can
still be set to re-enable the rescan lists.
Change-Id: I6e926b4c2dbd4cd56721869d4f817bdbb330b851
Reviewed-on: https://go-review.googlesource.com/31766
Reviewed-by: Rick Hudson <rlh@golang.org>
This implements the unconditional version of the hybrid deletion write
barrier, which always shades both the old and new pointer. It's
unconditional for now because barriers on channel operations require
checking both the source and destination stacks and we don't have a
way to funnel this information into the write barrier at the moment.
As part of this change, we modify the typed memclr operations
introduced earlier to invoke the write barrier.
This has basically no overall effect on benchmark performance. This is
good, since it indicates that neither the extra shade nor the new bulk
clear barriers have much effect. It also has little effect on latency.
This is expected, since we haven't yet modified mark termination to
take advantage of the hybrid barrier.
Updates #17503.
Change-Id: Iebedf84af2f0e857bd5d3a2d525f760b5cf7224b
Reviewed-on: https://go-review.googlesource.com/31765
Reviewed-by: Rick Hudson <rlh@golang.org>
With the hybrid barrier, unless we're doing a STW GC or hit a very
rare race (~once per all.bash) that can start mark termination before
all of the work is drained, we don't need to drain the work queue at
all. Even draining an empty work queue is rather expensive since we
have to enter the getfull() barrier, so it's worth avoiding this.
Conveniently, it's quite easy to detect whether or not we actually
need the getufull() barrier: since the world is stopped when we enter
mark termination, everything must have flushed its work to the work
queue, so we can just check the queue. If the queue is empty and we
haven't queued up any jobs that may create more work (which should
always be the case with the hybrid barrier), we can simply have all GC
workers perform non-blocking drains.
Also conveniently, this solution is quite safe. If we do somehow screw
something up and there's work on the work queue, some worker will
still process it, it just may not happen in parallel.
This is not the "right" solution, but it's simple, expedient,
low-risk, and maintains compatibility with debug.gcrescanstacks. When
we remove the gcrescanstacks fallback in Go 1.9, we should also fix
the race that starts mark termination early, and then we can eliminate
work draining from mark termination.
Updates #17503.
Change-Id: I7b3cd5de6a248ab29d78c2b42aed8b7443641361
Reviewed-on: https://go-review.googlesource.com/32186
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently bulkBarrierPreWrite calls writebarrierptr_prewrite, but this
means that we check writeBarrier.needed twice and perform cgo checks
twice.
Change bulkBarrierPreWrite to call writebarrierptr_prewrite1 to skip
over these duplicate checks.
This may speed up bulkBarrierPreWrite slightly, but mostly this will
save us from running out of nosplit stack space on ppc64x in the near
future.
Updates #17503.
Change-Id: I1cea1a2207e884ab1a279c6a5e378dcdc048b63e
Reviewed-on: https://go-review.googlesource.com/31890
Reviewed-by: Rick Hudson <rlh@golang.org>
gobuf.ctxt is set to nil from many places in assembly code and these
assignments require write barriers with the hybrid barrier.
Conveniently, in most of these places ctxt should already be nil, in
which case we don't need the barrier. This commit changes these places
to assert that ctxt is already nil.
gogo is more complicated, since ctxt may not already be nil. For gogo,
we manually perform the write barrier if ctxt is not nil.
Updates #17503.
Change-Id: I9d75e27c75a1b7f8b715ad112fc5d45ffa856d30
Reviewed-on: https://go-review.googlesource.com/31764
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Currently, we perform write barriers after performing pointer writes.
At the moment, it simply doesn't matter what order this happens in, as
long as they appear atomic to GC. But both the hybrid barrier and ROC
are going to require a pre-write write barrier.
For the hybrid barrier, this is important because the barrier needs to
observe both the current value of the slot and the value that will be
written to it. (Alternatively, the caller could do the write and pass
in the old value, but it seems easier and more useful to just swap the
order of the barrier and the write.)
For ROC, this is necessary because, if the pointer write is going to
make the pointer reachable to some goroutine that it currently is not
visible to, the garbage collector must take some special action before
that pointer becomes more broadly visible.
This commits swaps pointer writes around so the write barrier occurs
before the pointer write.
The main subtlety here is bulk memory writes. Currently, these copy to
the destination first and then use the pointer bitmap of the
destination to find the copied pointers and invoke the write barrier.
This is necessary because the source may not have a pointer bitmap. To
handle these, we pass both the source and the destination to the bulk
memory barrier, which uses the pointer bitmap of the destination, but
reads the pointer values from the source.
Updates #17503.
Change-Id: I78ecc0c5c94ee81c29019c305b3d232069294a55
Reviewed-on: https://go-review.googlesource.com/31763
Reviewed-by: Rick Hudson <rlh@golang.org>
We reject import of main packages, but we missed tests.
Reject in all tests except test of that main package.
We reject local (relative) imports from code with a
non-local import path, but again we missed tests.
Reject those too.
Fixes#14811.
Fixes#15795.
Fixes#17475.
Change-Id: I535ff26889520276a891904f54f1a85b2c40207d
Reviewed-on: https://go-review.googlesource.com/31821
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Quentin Smith <quentin@golang.org>
Materialize float constant 0 from integer zero register, instead
of loading from constant pool.
Also fix assembling FMOV from zero register to FP register.
Change-Id: Ie413dd342cedebdb95ba8cfc220e23ed2a39e885
Reviewed-on: https://go-review.googlesource.com/32250
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Apparently on macOS Sierra LLDB thinks /usr/lib/dyld is mapped
at address 0, even if Go code starts at 0x1000, and it looks up
addresses from dyld which shadows Go symbols. Move Go binary at
a higher address to avoid clash.
Fixes#17463. Re-enable TestLldbPython.
Change-Id: I89ca6f3ee48aa6da9862bfa0c2da91477cc93255
Reviewed-on: https://go-review.googlesource.com/32185
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Quentin Smith <quentin@golang.org>
As for dropg, save is writing a nil pointer that will generate a write
barrier with the hybrid barrier. However, in this case, ctxt always
should already be nil, so replace the write with an assertion that
this is the case.
At this point, we're ready to disable the write barrier elision
optimizations that interfere with the hybrid barrier.
Updates #17503.
Change-Id: I83208e65aa33403d442401f355b2e013ab9a50e9
Reviewed-on: https://go-review.googlesource.com/31571
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently this contains no write barriers because it's writing nil
pointers, but with the hybrid barrier, even these will produce write
barriers. However, since these are *gs and *ms, they don't need write
barriers, so we can simply eliminate them.
Updates #17503.
Change-Id: Ib188a60492c5cfb352814bf9b2bcb2941fb7d6c0
Reviewed-on: https://go-review.googlesource.com/31570
Reviewed-by: Rick Hudson <rlh@golang.org>
The hybrid barrier requires allocate-black, but there's one case where
we don't currently allocate black: the tiny allocator. If we allocate
a *new* tiny alloc block during GC, it will be allocated black, but if
we allocated the current block before GC, it won't be black, and the
further allocations from it won't mark it, which means we may free a
reachable tiny block during sweeping.
Fix this by passing over all mcaches at the beginning of mark, while
the world is still stopped, and greying their tiny blocks.
Updates #17503.
Change-Id: I04d4df7cc2f553f8f7b1e4cb0b52e2946588111a
Reviewed-on: https://go-review.googlesource.com/31456
Reviewed-by: Rick Hudson <rlh@golang.org>
The hybrid barrier requires barriers on stack-to-stack copies if
either stack is grey. There are only two instances of this in the
runtime: channel sends and starting a goroutine. Channel sends already
use typedmemmove and hence have the necessary barriers. This commits
adds barriers for the stack-to-stack copy when starting a goroutine.
Updates #17503.
Change-Id: Ibb55e08127ca4d021ac54be61cb96732efa5df5b
Reviewed-on: https://go-review.googlesource.com/31455
Reviewed-by: Rick Hudson <rlh@golang.org>
Original Change by Daria Kolistratova <daria.kolistratova@intel.com>
Added functions with suffix proto and stuff from pprof tool to translate
to protobuf. Done as the profile proto is more extensible than the legacy
pprof format and is pprof's preferred profile format. Large part was taken
from https://github.com/google/pprof tool. Tested by hand and compared the
result with translated by pprof tool, profiles are identical.
Fixes#16093
Change-Id: I2751345b09a66ee2b6aa64be76cba4cd1c326aa6
Reviewed-on: https://go-review.googlesource.com/32257
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alan Donovan <adonovan@google.com>
Waiting 2ms for all the kicked-off goroutines to run and block
seems a little optimistic. No harm done by waiting for 200ms instead.
Fixes#17238.
Change-Id: I827532ea2f5f1f3ed04179f8957dd2c563946ed0
Reviewed-on: https://go-review.googlesource.com/32103
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently we initialize LR on a new stack by writing nil to it. But
this is an initializing write since the newly allocated stack is not
zeroed, so this is unsafe with the hybrid barrier. Change this is a
uintptr write to avoid a bad write barrier.
Updates #17503.
Change-Id: I062ac352e35df7da4644c1f2a5aaab87049d1f60
Reviewed-on: https://go-review.googlesource.com/32093
Reviewed-by: Rick Hudson <rlh@golang.org>
We reuse finalizers in finblocks, which are allocated off-heap. This
means they have to be zero-initialized before becoming visible to the
garbage collector. We actually already do this by clearing the
finalizer before returning it to the pool, but we're not careful to
enforce correct memory ordering. Fix this by manipulating the
finalizer count atomically so these writes synchronize properly with
the garbage collector.
Updates #17503.
Change-Id: I7797d31df3c656c9fe654bc6da287f66a9e2037d
Reviewed-on: https://go-review.googlesource.com/31454
Reviewed-by: Rick Hudson <rlh@golang.org>
runfinq allocates a stack frame on the heap for constructing the
finalizer function calls and reuses it for each call. However, because
the type of this frame is constantly shifting, it tells mallocgc there
are no pointers in it and it acts essentially like uninitialized
memory between uses. But runfinq uses pointer writes with write
barriers to "initialize" this memory, which is not going to be safe
with the hybrid barrier, since the hybrid barrier may see a stale
pointer left in the "uninitialized" frame.
Fix this by zero-initializing the argument values in the frame before
writing the argument pointers.
Updates #17503.
Change-Id: I951c0a2be427eb9082a32d65c4410e6fdef041be
Reviewed-on: https://go-review.googlesource.com/31453
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently, zeroing generates an ssa.OpZero, which never has write
barriers, even if the assignment is an OASWB. The hybrid barrier
requires write barriers on zeroing, so change OASWB to generate an
ssa.OpZeroWB when assigning the zero value, which turns into a
typedmemclr.
Updates #17503.
Change-Id: Ib37ac5e39f578447dbd6b36a6a54117d5624784d
Reviewed-on: https://go-review.googlesource.com/31451
Reviewed-by: Cherry Zhang <cherryyz@google.com>
If a slice's backing store has pointers, we need to lower clears of
that slice to memclrHasPointers instead of memclrNoHeapPointers.
Updates #17503.
Change-Id: I20750e4bf57f7b8862f3d898bfb32d964b91d07b
Reviewed-on: https://go-review.googlesource.com/31450
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
The basic structure of Part.Read should be simple:
do what you can with the current buffered data,
reading more as you need it. Make it that way.
Working entirely in the bufio.Reader's buffer eliminates
the need for an additional bytes.Buffer.
This structure should be easier to extend in the future as
more special cases arise.
Change-Id: I83cb24a755a1767c4c037f9ece6716460c3ecd01
Reviewed-on: https://go-review.googlesource.com/32092
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Since barrier-less memclr is only safe in very narrow circumstances,
this commit renames memclr to avoid accidentally calling memclr on
typed memory. This can cause subtle, non-deterministic bugs, so it's
worth some effort to prevent. In the near term, this will also prevent
bugs creeping in from any concurrent CLs that add calls to memclr; if
this happens, whichever patch hits master second will fail to compile.
This also adds the other new memclr variants to the compiler's
builtin.go to minimize the churn on that binary blob. We'll use these
in future commits.
Updates #17503.
Change-Id: I00eead049f5bd35ca107ea525966831f3d1ed9ca
Reviewed-on: https://go-review.googlesource.com/31369
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently fixalloc does not zero memory it reuses. This is dangerous
with the hybrid barrier if the type may contain heap pointers, since
it may cause us to observe a dead heap pointer on reuse. It's also
error-prone since it's the only allocator that doesn't zero on
allocation (mallocgc of course zeroes, but so do persistentalloc and
sysAlloc). It's also largely pointless: for mcache, the caller
immediately memclrs the allocation; and the two specials types are
tiny so there's no real cost to zeroing them.
Change fixalloc to zero allocations by default.
The only type we don't zero by default is mspan. This actually
requires that the spsn's sweepgen survive across freeing and
reallocating a span. If we were to zero it, the following race would
be possible:
1. The current sweepgen is 2. Span s is on the unswept list.
2. Direct sweeping sweeps span s, finds it's all free, and releases s
to the fixalloc.
3. Thread 1 allocates s from fixalloc. Suppose this zeros s, including
s.sweepgen.
4. Thread 1 calls s.init, which sets s.state to _MSpanDead.
5. On thread 2, background sweeping comes across span s in allspans
and cas's s.sweepgen from 0 (sg-2) to 1 (sg-1). Now it thinks it
owns it for sweeping. 6. Thread 1 continues initializing s.
Everything breaks.
I would like to fix this because it's obviously confusing, but it's a
subtle enough problem that I'm leaving it alone for now. The solution
may be to skip sweepgen 0, but then we have to think about wrap-around
much more carefully.
Updates #17503.
Change-Id: Ie08691feed3abbb06a31381b94beb0a2e36a0613
Reviewed-on: https://go-review.googlesource.com/31368
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently the zero value of an mspan is in the "in use" state. This
seems like a bad idea in general. But it's going to wreak havoc when
we make fixalloc zero allocations: even "freed" mspan objects are
still on the allspans list and still get looked at by the garbage
collector. Hence, if we leave the mspan states the way they are,
allocating a span that reuses old memory will temporarily pass that
span (which is visible to GC!) through the "in use" state, which can
cause "unswept span" panics.
Fix all of this by making the zero state "dead".
Updates #17503.
Change-Id: I77c7ac06e297af4b9e6258bc091c37abe102acc3
Reviewed-on: https://go-review.googlesource.com/31367
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
The hybrid barrier requires distinguishing typed and untyped memory
even when zeroing because the *current* contents of the memory matters
even when overwriting.
This commit introduces runtime.typedmemclr and runtime.memclrHasPointers
as a typed memory clearing functions parallel to runtime.typedmemmove.
Currently these simply call memclr, but with the hybrid barrier we'll
need to shade any pointers we're overwriting. These will provide us
with the necessary hooks to do so.
Updates #17503.
Change-Id: I74478619f8907825898092aaa204d6e4690f27e6
Reviewed-on: https://go-review.googlesource.com/31366
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently all mcaches are flushed in a single STW root job. This takes
about 5 µs per P, but since it's done sequentially it adds about
5*GOMAXPROCS µs to the STW.
Fix this by parallelizing the job. Since there are exactly GOMAXPROCS
mcaches to flush, this parallelizes quite nicely and brings the STW
latency cost down to a constant 5 µs (assuming GOMAXPROCS actually
reflects the number of CPUs).
Updates #17503.
Change-Id: Ibefeb1c2229975d5137c6e67fac3b6c92103742d
Reviewed-on: https://go-review.googlesource.com/32033
Reviewed-by: Rick Hudson <rlh@golang.org>
Added functions with suffix proto and stuff from pprof tool to translate
to protobuf. Done as the profile proto is more extensible than the legacy
pprof format and is pprof's preferred profile format. Large part was taken
from https://github.com/google/pprof tool. Tested by hand and compared the
result with translated by pprof tool, profiles are identical.
Fixes#16093
Change-Id: I5acdb2809cab0d16ed4694fdaa7b8ddfd68df11e
Reviewed-on: https://go-review.googlesource.com/30556
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
The current logic in gcDrain conflates non-blocking with preemptible
draining for root jobs. As a result, if you do a non-blocking (but
*not* preemptible) drain, like dedicated workers do, the root job
drain will stop if preempted and fall through to heap marking jobs,
which won't stop until it fails to get a heap marking job.
This commit fixes the condition on root marking jobs so they only stop
when preempted if the drain is preemptible.
Coincidentally, this also fixes a nil pointer dereference if we call
gcDrain with gcDrainNoBlock and without a user G, since it tries to
get the preempt flag from the nil user G. This combination never
happens right now, but will in the future.
Change-Id: Ia910ec20a9b46237f7926969144a33b1b4a7b2f9
Reviewed-on: https://go-review.googlesource.com/32291
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This adds support to the runtime/trace test for saving traces
collected by its tests to disk and a script in internal/trace that
uses this to collect canned traces for the trace test suite. This can
be used to add to the test suite when we introduce a new trace format
version.
Change-Id: Id9ac1ff312235bf02f982fdfff8a827f54035758
Reviewed-on: https://go-review.googlesource.com/32290
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
In a large codebase within Google, there are thousands of uses of:
ContainsAny|IndexAny|LastIndexAny|Trim|TrimLeft|TrimRight
An analysis of their usage shows that over 97% of them only use character
sets consisting of only ASCII symbols.
Uses of ContainsAny|IndexAny|LastIndexAny:
6% are 1 character (e.g., "\n" or " ")
58% are 2-4 characters (e.g., "<>" or "\r\n\t ")
24% are 5-9 characters (e.g., "()[]*^$")
10% are 10+ characters (e.g., "+-=&|><!(){}[]^\"~*?:\\/ ")
We optimize for ASCII sets, which are commonly used to search for
"control" characters in some string. We don't optimize for the
single character scenario since IndexRune or IndexByte could be used.
Uses of Trim|TrimLeft|TrimRight:
71% are 1 character (e.g., "\n" or " ")
14% are 2 characters (e.g., "\r\n")
10% are 3-4 characters (e.g., " \t\r\n")
5% are 10+ characters (e.g., "0123456789abcdefABCDEF")
We optimize for the single character case with a simple closured function
that only checks for that character's value. We optimize for the medium
and larger sets using a 16-byte bit-map representing a set of ASCII characters.
The benchmarks below have the following suffix name "%d:%d" where the first
number is the length of the input and the second number is the length
of the charset.
== bytes package ==
benchmark old ns/op new ns/op delta
BenchmarkIndexAnyASCII/1:1-4 5.09 5.23 +2.75%
BenchmarkIndexAnyASCII/1:2-4 5.81 5.85 +0.69%
BenchmarkIndexAnyASCII/1:4-4 7.22 7.50 +3.88%
BenchmarkIndexAnyASCII/1:8-4 11.0 11.1 +0.91%
BenchmarkIndexAnyASCII/1:16-4 17.5 17.8 +1.71%
BenchmarkIndexAnyASCII/16:1-4 36.0 34.0 -5.56%
BenchmarkIndexAnyASCII/16:2-4 46.6 36.5 -21.67%
BenchmarkIndexAnyASCII/16:4-4 78.0 40.4 -48.21%
BenchmarkIndexAnyASCII/16:8-4 136 47.4 -65.15%
BenchmarkIndexAnyASCII/16:16-4 254 61.5 -75.79%
BenchmarkIndexAnyASCII/256:1-4 542 388 -28.41%
BenchmarkIndexAnyASCII/256:2-4 705 382 -45.82%
BenchmarkIndexAnyASCII/256:4-4 1089 386 -64.55%
BenchmarkIndexAnyASCII/256:8-4 1994 394 -80.24%
BenchmarkIndexAnyASCII/256:16-4 3843 411 -89.31%
BenchmarkIndexAnyASCII/4096:1-4 8522 5873 -31.08%
BenchmarkIndexAnyASCII/4096:2-4 11253 5861 -47.92%
BenchmarkIndexAnyASCII/4096:4-4 17824 5883 -66.99%
BenchmarkIndexAnyASCII/4096:8-4 32053 5871 -81.68%
BenchmarkIndexAnyASCII/4096:16-4 60512 5888 -90.27%
BenchmarkTrimASCII/1:1-4 79.5 70.8 -10.94%
BenchmarkTrimASCII/1:2-4 79.0 105 +32.91%
BenchmarkTrimASCII/1:4-4 79.6 109 +36.93%
BenchmarkTrimASCII/1:8-4 78.8 118 +49.75%
BenchmarkTrimASCII/1:16-4 80.2 132 +64.59%
BenchmarkTrimASCII/16:1-4 243 116 -52.26%
BenchmarkTrimASCII/16:2-4 243 171 -29.63%
BenchmarkTrimASCII/16:4-4 243 176 -27.57%
BenchmarkTrimASCII/16:8-4 241 184 -23.65%
BenchmarkTrimASCII/16:16-4 238 199 -16.39%
BenchmarkTrimASCII/256:1-4 2580 840 -67.44%
BenchmarkTrimASCII/256:2-4 2603 1175 -54.86%
BenchmarkTrimASCII/256:4-4 2572 1188 -53.81%
BenchmarkTrimASCII/256:8-4 2550 1191 -53.29%
BenchmarkTrimASCII/256:16-4 2585 1208 -53.27%
BenchmarkTrimASCII/4096:1-4 39773 12181 -69.37%
BenchmarkTrimASCII/4096:2-4 39946 17231 -56.86%
BenchmarkTrimASCII/4096:4-4 39641 17179 -56.66%
BenchmarkTrimASCII/4096:8-4 39835 17175 -56.88%
BenchmarkTrimASCII/4096:16-4 40229 17215 -57.21%
== strings package ==
benchmark old ns/op new ns/op delta
BenchmarkIndexAnyASCII/1:1-4 5.94 4.97 -16.33%
BenchmarkIndexAnyASCII/1:2-4 5.94 5.55 -6.57%
BenchmarkIndexAnyASCII/1:4-4 7.45 7.21 -3.22%
BenchmarkIndexAnyASCII/1:8-4 10.8 10.6 -1.85%
BenchmarkIndexAnyASCII/1:16-4 17.4 17.2 -1.15%
BenchmarkIndexAnyASCII/16:1-4 36.4 32.2 -11.54%
BenchmarkIndexAnyASCII/16:2-4 49.6 34.6 -30.24%
BenchmarkIndexAnyASCII/16:4-4 77.5 37.9 -51.10%
BenchmarkIndexAnyASCII/16:8-4 138 45.5 -67.03%
BenchmarkIndexAnyASCII/16:16-4 241 59.1 -75.48%
BenchmarkIndexAnyASCII/256:1-4 509 378 -25.74%
BenchmarkIndexAnyASCII/256:2-4 720 381 -47.08%
BenchmarkIndexAnyASCII/256:4-4 1142 384 -66.37%
BenchmarkIndexAnyASCII/256:8-4 1999 391 -80.44%
BenchmarkIndexAnyASCII/256:16-4 3735 403 -89.21%
BenchmarkIndexAnyASCII/4096:1-4 7973 5824 -26.95%
BenchmarkIndexAnyASCII/4096:2-4 11432 5809 -49.19%
BenchmarkIndexAnyASCII/4096:4-4 18327 5819 -68.25%
BenchmarkIndexAnyASCII/4096:8-4 33059 5828 -82.37%
BenchmarkIndexAnyASCII/4096:16-4 59703 5817 -90.26%
BenchmarkTrimASCII/1:1-4 71.9 71.8 -0.14%
BenchmarkTrimASCII/1:2-4 73.3 103 +40.52%
BenchmarkTrimASCII/1:4-4 71.8 106 +47.63%
BenchmarkTrimASCII/1:8-4 71.2 113 +58.71%
BenchmarkTrimASCII/1:16-4 71.6 128 +78.77%
BenchmarkTrimASCII/16:1-4 152 116 -23.68%
BenchmarkTrimASCII/16:2-4 160 168 +5.00%
BenchmarkTrimASCII/16:4-4 172 170 -1.16%
BenchmarkTrimASCII/16:8-4 200 177 -11.50%
BenchmarkTrimASCII/16:16-4 254 193 -24.02%
BenchmarkTrimASCII/256:1-4 1438 864 -39.92%
BenchmarkTrimASCII/256:2-4 1551 1195 -22.95%
BenchmarkTrimASCII/256:4-4 1770 1200 -32.20%
BenchmarkTrimASCII/256:8-4 2195 1216 -44.60%
BenchmarkTrimASCII/256:16-4 3054 1224 -59.92%
BenchmarkTrimASCII/4096:1-4 21726 12557 -42.20%
BenchmarkTrimASCII/4096:2-4 23586 17508 -25.77%
BenchmarkTrimASCII/4096:4-4 26898 17510 -34.90%
BenchmarkTrimASCII/4096:8-4 33714 17595 -47.81%
BenchmarkTrimASCII/4096:16-4 47429 17700 -62.68%
The benchmarks added test the worst case. For IndexAny, that is when the
charset matches none of the input. For Trim, it is when the charset matches
all of the input.
Change-Id: I970874d101a96b33528fc99b165379abe58cf6ea
Reviewed-on: https://go-review.googlesource.com/31593
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Martin Möhrmann <martisch@uos.de>
The report in #17414 points out that if you have many many templates,
then this is an overwhelming list and just hurts the signal-to-noise ratio of the error.
Even the test of the old behavior also supports the idea that this is noise:
template: empty: "empty" is an incomplete or empty template; defined templates are: "secondary"
The chance that someone mistyped "secondary" as "empty" is slim at best.
Similarly, the compiler does not augment an error like 'unknown variable x'
by dumping the full list of all the known variables.
For all these reasons, drop the list.
Fixes#17414.
Change-Id: I78f92d2c591df7218385fe723a4abc497913acf8
Reviewed-on: https://go-review.googlesource.com/32116
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Following RFC 6265 Section 5.1.1.5, ensure that the minimum
year for which an Expires value is valid and can be included in
the cookie's string, is 1601 instead of the Epoch year 1970.
A detailed specification for parsing the Expiry field is at:
https://tools.ietf.org/html/rfc6265#section-5.2.1
I stumbled across this bug due to this StackOverflow answer
that recommends setting the Expiry to the Epoch:
http://stackoverflow.com/a/5285982Fixes#17632
Change-Id: I3c1bdf821d369320334a5dc1e4bf22783cbfe9fc
Reviewed-on: https://go-review.googlesource.com/32142
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This lets quotedprintable handle some inputs found in the wild,
most notably generated by "Microsoft CDO for Exchange 2000",
and it also matches how Python's quopri package handles these inputs.
Fixes#13219.
Change-Id: I69d400659d01b6ea0f707b7053d61803a85b4799
Reviewed-on: https://go-review.googlesource.com/32174
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Currently when a goroutine blocks on a GC assist, it emits a generic
EvGoBlock event. Since assist blocking events and, in particular, the
length of the blocked assist queue, are important for diagnosing GC
behavior, this commit adds a new EvGoBlockGC event for blocking on a
GC assist. The trace viewer uses this event to report a "waiting on
GC" count in the "Goroutines" row. This makes sense because, unlike
other blocked goroutines, these goroutines do have work to do, so
being blocked on a GC assist is quite similar to being in the
"runnable" state, which we also report in the trace viewer.
Change-Id: Ic21a326992606b121ea3d3d00110d8d1fdc7a5ef
Reviewed-on: https://go-review.googlesource.com/30704
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Currently the trace tool tracks an overall counts of goroutine states,
but not the states of any individual goroutine. We're about to add
more sophisticated blocked-state tracking, so add this tracking and
base the state counts off the tracked goroutine states.
Change-Id: I943ed61782436cf9540f4ee26c5561715c5b4a1d
Reviewed-on: https://go-review.googlesource.com/30703
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Currently mark workers are shown in the trace as regular goroutines
labeled "runtime.gcBgMarkWorker". That's somewhat unhelpful to an end
user because of the opaque label and particularly unhelpful to runtime
developers because it doesn't distinguish the different types of mark
workers.
Fix this by introducing a variant of the GoStart event called
GoStartLabel that lets the runtime indicate a label for a goroutine
execution span and using this to label mark worker executions as "GC
(<mode>)" in the trace viewer.
Since this bumps the trace version to 1.8, we also add test data for
1.7 traces.
Change-Id: Id7b9c0536508430c661ffb9e40e436f3901ca121
Reviewed-on: https://go-review.googlesource.com/30702
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
The mechanism is initially introduced (and reviewed) in CL 30597
on S390X.
Reduce number of "spilled value remains" by 0.4% in cmd/go.
Disabled on ARMv5 because LR is clobbered almost everywhere with
inserted softfloat calls.
Change-Id: I2934737ce2455909647ed2118fe2bd6f0aa5ac52
Reviewed-on: https://go-review.googlesource.com/32178
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Materialize float constant 0 from integer zero register, instead
of loading from constant pool.
Change-Id: Ie4728895b9d617bec2a29d15729c0efaa10eedbb
Reviewed-on: https://go-review.googlesource.com/32109
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
The current implementation for Power architecture does not include the vector
scalar (VSX) registers. This adds the 63 VSX registers and the most commonly
used instructions: load/store VSX vector/scalar, move to/from VSR, logical
operations, select, merge, splat, permute, shift, FP-FP conversion, FP-integer
conversion and integer-FP conversion.
Change-Id: I0f7572d2359fe7f3ea0124a1eb1b0bebab33649e
Reviewed-on: https://go-review.googlesource.com/30510
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, gcDrain looks for the preemption flag at getg().preempt.
However, commit d6625ca moved mark worker draining to the system
stack, which means getg() returns the g0, which never has the preempt
flag set, so idle and fractional workers don't get preempted after
10ms and just run until they run out of work. As a result, if there's
enough idle time, GC becomes effectively STW.
Fix this by looking for the preemption flag on getg().m.curg, which
will always be the user G (where the preempt flag is set), regardless
of whether gcDrain is running on the user or the g0 stack.
Change-Id: Ib554cf49a705b86ccc3d08940bc869f868c50dd2
Reviewed-on: https://go-review.googlesource.com/32251
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
runtime.SetMutexProfileFraction(n int) will capture 1/n-th of stack
traces of goroutines holding contended mutexes if n > 0. From runtime/pprof,
pprot.Lookup("mutex").WriteTo writes the accumulated
stack traces to w (in essentially the same format that blocking
profiling uses).
Change-Id: Ie0b54fa4226853d99aa42c14cb529ae586a8335a
Reviewed-on: https://go-review.googlesource.com/29650
Reviewed-by: Austin Clements <austin@google.com>
- removes the runtime function stringtoslicebytetmp
- removes the generation of calls to stringtoslicebytetmp from the frontend
- adds handling of OSTRARRAYBYTETMP in the backend
This reduces binary sizes and avoids function call overhead.
Change-Id: Ib9988d48549cee663b685b4897a483f94727b940
Reviewed-on: https://go-review.googlesource.com/32158
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Martin Möhrmann <martisch@uos.de>
TryBot-Result: Gobot Gobot <gobot@golang.org>
I do not know why it is included. All tests pass without it.
Change-Id: I839076ee131816dfd177570a902c69fe8fba5022
Reviewed-on: https://go-review.googlesource.com/32144
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For cases where we already have the ops, combine
sign or zero extension with the previous load
(even if the load is larger width).
Update #15105
Change-Id: I76c5ddd69e1f900d2a17d35503083bd3b4978e48
Reviewed-on: https://go-review.googlesource.com/28190
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Use a local map during inlining instead.
Change-Id: I10cd19885e7124f812bb04a79dbda52bfebfe1a1
Reviewed-on: https://go-review.googlesource.com/32225
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
var x uint64
uint8(x >> 56)
We don't need to generate any code for the uint8().
Update #15090
Change-Id: Ie1ca4e32022dccf7f7bc42d531a285521fb67872
Reviewed-on: https://go-review.googlesource.com/28191
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
When we do
var x []byte = ...
y := x[i:]
We can't just use y.ptr = x.ptr + i, as the new pointer may point to the
next object in memory after the backing array.
We used to fix this by doing:
y.cap = x.cap - i
delta := i
if y.cap == 0 {
delta = 0
}
y.ptr = x.ptr + delta
That generates a branch in what is otherwise straight-line code.
Better to do:
y.cap = x.cap - i
mask := (y.cap - 1) >> 63 // -1 if y.cap==0, 0 otherwise
y.ptr = x.ptr + i &^ mask
It's about the same number of instructions (~4, depending on what
parts are constant, and the target architecture), but it is all
inline. It plays nicely with CSE, and the mask can be computed
in parallel with the index (in cases where a multiply is required).
It is a minor win in both speed and space.
Change-Id: Ied60465a0b8abb683c02208402e5bb7ac0e8370f
Reviewed-on: https://go-review.googlesource.com/32022
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
I had added this originally so we can play with different notations
but it doesn't make sense to keep it around since gofmt will convert
a type alias declaration using "=" into one using "=>" anyhow. More
importantly, the spec doesn't permit it.
Change-Id: Icb010b5a9976aebf877e48b3ce9d7245559ca494
Reviewed-on: https://go-review.googlesource.com/32105
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Otherwise, the way the ELF dynamic linker works means that you can end up with
the same itab being passed to additab twice, leading to the itab linked list
having a cycle in it. Add a test to additab in runtime to catch this when it
happens, not some arbitrary and surprsing time later.
Fixes#17594
Change-Id: I6c82edcc9ac88ac188d1185370242dc92f46b1ad
Reviewed-on: https://go-review.googlesource.com/32131
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change updates the vendored version of the poly1305 package to
match the latest version from x/crypto. This pulls in this change:
commit 1150b8bd09e53aea1d415621adae9bad665061a1
Author: Adam Langley <agl@golang.org>
Date: Fri Oct 21 15:59:10 2016 -0700
poly1305: don't move R13 in sum_arm.s.
Rather than change the value of R13 during the execution, keep R13 fixed
(after the initial prelude) and always use offsets from it.
This should help the runtime figure out what's going on if, say, a
signal should occur while running this code.
I've also trimmed the set of saved registers since Go doesn't require
the callee to maintain anything except R10 and R13.
Change-Id: Ifbeca73c1d964cc43bb7f8c20c61066f22fd562d
Reviewed-on: https://go-review.googlesource.com/31717
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Change-Id: I376b3e5d53aaded891e02801bd5faa5ff758da0d
Reviewed-on: https://go-review.googlesource.com/32227
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
